aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/cmx270_nand.c79
1 files changed, 47 insertions, 32 deletions
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index cb663ef245d..fc8529bedfd 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -20,9 +20,11 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
@@ -30,20 +32,6 @@
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
-/* This macro needed to ensure in-order operation of GPIO and local
- * bus. Without both asm command and dummy uncached read there're
- * states when NAND access is broken. I've looked for such macro(s) in
- * include/asm-arm but found nothing approptiate.
- * dmac_clean_range is close, but is makes cache invalidation
- * unnecessary here and it cannot be used in module
- */
-#define DRAIN_WB() \
- do { \
- unsigned char dummy; \
- asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
- dummy=*((unsigned char*)UNCACHED_ADDR); \
- } while(0)
-
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
@@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static inline void nand_cs_on(void)
{
- GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO_NAND_CS, 0);
}
static void nand_cs_off(void)
{
- DRAIN_WB();
+ dsb();
- GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO_NAND_CS, 1);
}
/*
@@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
struct nand_chip* this = mtd->priv;
unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
- DRAIN_WB();
+ dsb();
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_ALE )
@@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
nand_cs_off();
}
- DRAIN_WB();
+ dsb();
this->IO_ADDR_W = (void __iomem*)nandaddr;
if (dat != NAND_CMD_NONE)
writel((dat << 16), this->IO_ADDR_W);
- DRAIN_WB();
+ dsb();
}
/*
@@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
*/
static int cmx270_device_ready(struct mtd_info *mtd)
{
- DRAIN_WB();
+ dsb();
- return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
+ return (gpio_get_value(GPIO_NAND_RB));
}
/*
@@ -168,20 +156,40 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
+ if (!machine_is_armcore())
+ return -ENODEV;
+
+ ret = gpio_request(GPIO_NAND_CS, "NAND CS");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND CS gpio\n");
+ return ret;
+ }
+
+ gpio_direction_output(GPIO_NAND_CS, 1);
+
+ ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND R/B gpio\n");
+ goto err_gpio_request;
+ }
+
+ gpio_direction_input(GPIO_NAND_RB);
+
/* Allocate memory for MTD device structure and private data */
cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
- printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
- return -ENOMEM;
+ pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
+ ret = -ENOMEM;
+ goto err_kzalloc;
}
cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
if (!cmx270_nand_io) {
- printk("Unable to ioremap NAND device\n");
+ pr_debug("Unable to ioremap NAND device\n");
ret = -EINVAL;
- goto err1;
+ goto err_ioremap;
}
/* Get pointer to private data */
@@ -209,9 +217,9 @@ static int cmx270_init(void)
/* Scan to find existence of the device */
if (nand_scan (cmx270_nand_mtd, 1)) {
- printk(KERN_NOTICE "No NAND device\n");
+ pr_notice("No NAND device\n");
ret = -ENXIO;
- goto err2;
+ goto err_scan;
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
@@ -229,18 +237,22 @@ static int cmx270_init(void)
}
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+ pr_notice("Using %s partition definition\n", part_type);
ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
if (ret)
- goto err2;
+ goto err_scan;
/* Return happy */
return 0;
-err2:
+err_scan:
iounmap(cmx270_nand_io);
-err1:
+err_ioremap:
kfree(cmx270_nand_mtd);
+err_kzalloc:
+ gpio_free(GPIO_NAND_RB);
+err_gpio_request:
+ gpio_free(GPIO_NAND_CS);
return ret;
@@ -255,6 +267,9 @@ static void cmx270_cleanup(void)
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
+ gpio_free(GPIO_NAND_RB);
+ gpio_free(GPIO_NAND_CS);
+
iounmap(cmx270_nand_io);
/* Free the MTD device structure */