diff options
Diffstat (limited to 'drivers/net/3c527.c')
| -rw-r--r-- | drivers/net/3c527.c | 1675 |
1 files changed, 1675 insertions, 0 deletions
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c new file mode 100644 index 00000000000..6db3301e796 --- /dev/null +++ b/drivers/net/3c527.c @@ -0,0 +1,1675 @@ +/* 3c527.c: 3Com Etherlink/MC32 driver for Linux 2.4 and 2.6. + * + * (c) Copyright 1998 Red Hat Software Inc + * Written by Alan Cox. + * Further debugging by Carl Drougge. + * Initial SMP support by Felipe W Damasio <felipewd@terra.com.br> + * Heavily modified by Richard Procter <rnp@paradise.net.nz> + * + * Based on skeleton.c written 1993-94 by Donald Becker and ne2.c + * (for the MCA stuff) written by Wim Dumon. + * + * Thanks to 3Com for making this possible by providing me with the + * documentation. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#define DRV_NAME "3c527" +#define DRV_VERSION "0.7-SMP" +#define DRV_RELDATE "2003/09/21" + +static const char *version = +DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net.nz>\n"; + +/** + * DOC: Traps for the unwary + * + * The diagram (Figure 1-1) and the POS summary disagree with the + * "Interrupt Level" section in the manual. + * + * The manual contradicts itself when describing the minimum number + * buffers in the 'configure lists' command. + * My card accepts a buffer config of 4/4. + * + * Setting the SAV BP bit does not save bad packets, but + * only enables RX on-card stats collection. + * + * The documentation in places seems to miss things. In actual fact + * I've always eventually found everything is documented, it just + * requires careful study. + * + * DOC: Theory Of Operation + * + * The 3com 3c527 is a 32bit MCA bus mastering adapter with a large + * amount of on board intelligence that housekeeps a somewhat dumber + * Intel NIC. For performance we want to keep the transmit queue deep + * as the card can transmit packets while fetching others from main + * memory by bus master DMA. Transmission and reception are driven by + * circular buffer queues. + * + * The mailboxes can be used for controlling how the card traverses + * its buffer rings, but are used only for inital setup in this + * implementation. The exec mailbox allows a variety of commands to + * be executed. Each command must complete before the next is + * executed. Primarily we use the exec mailbox for controlling the + * multicast lists. We have to do a certain amount of interesting + * hoop jumping as the multicast list changes can occur in interrupt + * state when the card has an exec command pending. We defer such + * events until the command completion interrupt. + * + * A copy break scheme (taken from 3c59x.c) is employed whereby + * received frames exceeding a configurable length are passed + * directly to the higher networking layers without incuring a copy, + * in what amounts to a time/space trade-off. + * + * The card also keeps a large amount of statistical information + * on-board. In a perfect world, these could be used safely at no + * cost. However, lacking information to the contrary, processing + * them without races would involve so much extra complexity as to + * make it unworthwhile to do so. In the end, a hybrid SW/HW + * implementation was made necessary --- see mc32_update_stats(). + * + * DOC: Notes + * + * It should be possible to use two or more cards, but at this stage + * only by loading two copies of the same module. + * + * The on-board 82586 NIC has trouble receiving multiple + * back-to-back frames and so is likely to drop packets from fast + * senders. +**/ + +#include <linux/module.h> + +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_ether.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/mca-legacy.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/ethtool.h> +#include <linux/completion.h> +#include <linux/bitops.h> + +#include <asm/semaphore.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/dma.h> + +#include "3c527.h" + +MODULE_LICENSE("GPL"); + +/* + * The name of the card. Is used for messages and in the requests for + * io regions, irqs and dma channels + */ +static const char* cardname = DRV_NAME; + +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef NET_DEBUG +#define NET_DEBUG 2 +#endif + +#undef DEBUG_IRQ + +static unsigned int mc32_debug = NET_DEBUG; + +/* The number of low I/O ports used by the ethercard. */ +#define MC32_IO_EXTENT 8 + +/* As implemented, values must be a power-of-2 -- 4/8/16/32 */ +#define TX_RING_LEN 32 /* Typically the card supports 37 */ +#define RX_RING_LEN 8 /* " " " */ + +/* Copy break point, see above for details. + * Setting to > 1512 effectively disables this feature. */ +#define RX_COPYBREAK 200 /* Value from 3c59x.c */ + +/* Issue the 82586 workaround command - this is for "busy lans", but + * basically means for all lans now days - has a performance (latency) + * cost, but best set. */ +static const int WORKAROUND_82586=1; + +/* Pointers to buffers and their on-card records */ +struct mc32_ring_desc +{ + volatile struct skb_header *p; + struct sk_buff *skb; +}; + +/* Information that needs to be kept for each board. */ +struct mc32_local +{ + int slot; + + u32 base; + struct net_device_stats net_stats; + volatile struct mc32_mailbox *rx_box; + volatile struct mc32_mailbox *tx_box; + volatile struct mc32_mailbox *exec_box; + volatile struct mc32_stats *stats; /* Start of on-card statistics */ + u16 tx_chain; /* Transmit list start offset */ + u16 rx_chain; /* Receive list start offset */ + u16 tx_len; /* Transmit list count */ + u16 rx_len; /* Receive list count */ + + u16 xceiver_desired_state; /* HALTED or RUNNING */ + u16 cmd_nonblocking; /* Thread is uninterested in command result */ + u16 mc_reload_wait; /* A multicast load request is pending */ + u32 mc_list_valid; /* True when the mclist is set */ + + struct mc32_ring_desc tx_ring[TX_RING_LEN]; /* Host Transmit ring */ + struct mc32_ring_desc rx_ring[RX_RING_LEN]; /* Host Receive ring */ + + atomic_t tx_count; /* buffers left */ + atomic_t tx_ring_head; /* index to tx en-queue end */ + u16 tx_ring_tail; /* index to tx de-queue end */ + + u16 rx_ring_tail; /* index to rx de-queue end */ + + struct semaphore cmd_mutex; /* Serialises issuing of execute commands */ + struct completion execution_cmd; /* Card has completed an execute command */ + struct completion xceiver_cmd; /* Card has completed a tx or rx command */ +}; + +/* The station (ethernet) address prefix, used for a sanity check. */ +#define SA_ADDR0 0x02 +#define SA_ADDR1 0x60 +#define SA_ADDR2 0xAC + +struct mca_adapters_t { + unsigned int id; + char *name; +}; + +static const struct mca_adapters_t mc32_adapters[] = { + { 0x0041, "3COM EtherLink MC/32" }, + { 0x8EF5, "IBM High Performance Lan Adapter" }, + { 0x0000, NULL } +}; + + +/* Macros for ring index manipulations */ +static inline u16 next_rx(u16 rx) { return (rx+1)&(RX_RING_LEN-1); }; +static inline u16 prev_rx(u16 rx) { return (rx-1)&(RX_RING_LEN-1); }; + +static inline u16 next_tx(u16 tx) { return (tx+1)&(TX_RING_LEN-1); }; + + +/* Index to functions, as function prototypes. */ +static int mc32_probe1(struct net_device *dev, int ioaddr); +static int mc32_command(struct net_device *dev, u16 cmd, void *data, int len); +static int mc32_open(struct net_device *dev); +static void mc32_timeout(struct net_device *dev); +static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t mc32_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int mc32_close(struct net_device *dev); +static struct net_device_stats *mc32_get_stats(struct net_device *dev); +static void mc32_set_multicast_list(struct net_device *dev); +static void mc32_reset_multicast_list(struct net_device *dev); +static struct ethtool_ops netdev_ethtool_ops; + +static void cleanup_card(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + unsigned slot = lp->slot; + mca_mark_as_unused(slot); + mca_set_adapter_name(slot, NULL); + free_irq(dev->irq, dev); + release_region(dev->base_addr, MC32_IO_EXTENT); +} + +/** + * mc32_probe - Search for supported boards + * @unit: interface number to use + * + * Because MCA bus is a real bus and we can scan for cards we could do a + * single scan for all boards here. Right now we use the passed in device + * structure and scan for only one board. This needs fixing for modules + * in particular. + */ + +struct net_device *__init mc32_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct mc32_local)); + static int current_mca_slot = -1; + int i; + int err; + + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) + sprintf(dev->name, "eth%d", unit); + + SET_MODULE_OWNER(dev); + + /* Do not check any supplied i/o locations. + POS registers usually don't fail :) */ + + /* MCA cards have POS registers. + Autodetecting MCA cards is extremely simple. + Just search for the card. */ + + for(i = 0; (mc32_adapters[i].name != NULL); i++) { + current_mca_slot = + mca_find_unused_adapter(mc32_adapters[i].id, 0); + + if(current_mca_slot != MCA_NOTFOUND) { + if(!mc32_probe1(dev, current_mca_slot)) + { + mca_set_adapter_name(current_mca_slot, + mc32_adapters[i].name); + mca_mark_as_used(current_mca_slot); + err = register_netdev(dev); + if (err) { + cleanup_card(dev); + free_netdev(dev); + dev = ERR_PTR(err); + } + return dev; + } + + } + } + free_netdev(dev); + return ERR_PTR(-ENODEV); +} + +/** + * mc32_probe1 - Check a given slot for a board and test the card + * @dev: Device structure to fill in + * @slot: The MCA bus slot being used by this card + * + * Decode the slot data and configure the card structures. Having done this we + * can reset the card and configure it. The card does a full self test cycle + * in firmware so we have to wait for it to return and post us either a + * failure case or some addresses we use to find the board internals. + */ + +static int __init mc32_probe1(struct net_device *dev, int slot) +{ + static unsigned version_printed; + int i, err; + u8 POS; + u32 base; + struct mc32_local *lp = netdev_priv(dev); + static u16 mca_io_bases[]={ + 0x7280,0x7290, + 0x7680,0x7690, + 0x7A80,0x7A90, + 0x7E80,0x7E90 + }; + static u32 mca_mem_bases[]={ + 0x00C0000, + 0x00C4000, + 0x00C8000, + 0x00CC000, + 0x00D0000, + 0x00D4000, + 0x00D8000, + 0x00DC000 + }; + static char *failures[]={ + "Processor instruction", + "Processor data bus", + "Processor data bus", + "Processor data bus", + "Adapter bus", + "ROM checksum", + "Base RAM", + "Extended RAM", + "82586 internal loopback", + "82586 initialisation failure", + "Adapter list configuration error" + }; + + /* Time to play MCA games */ + + if (mc32_debug && version_printed++ == 0) + printk(KERN_DEBUG "%s", version); + + printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot); + + POS = mca_read_stored_pos(slot, 2); + + if(!(POS&1)) + { + printk(" disabled.\n"); + return -ENODEV; + } + + /* Fill in the 'dev' fields. */ + dev->base_addr = mca_io_bases[(POS>>1)&7]; + dev->mem_start = mca_mem_bases[(POS>>4)&7]; + + POS = mca_read_stored_pos(slot, 4); + if(!(POS&1)) + { + printk("memory window disabled.\n"); + return -ENODEV; + } + + POS = mca_read_stored_pos(slot, 5); + + i=(POS>>4)&3; + if(i==3) + { + printk("invalid memory window.\n"); + return -ENODEV; + } + + i*=16384; + i+=16384; + + dev->mem_end=dev->mem_start + i; + + dev->irq = ((POS>>2)&3)+9; + + if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname)) + { + printk("io 0x%3lX, which is busy.\n", dev->base_addr); + return -EBUSY; + } + + printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n", + dev->base_addr, dev->irq, dev->mem_start, i/1024); + + + /* We ought to set the cache line size here.. */ + + + /* + * Go PROM browsing + */ + + printk("%s: Address ", dev->name); + + /* Retrieve and print the ethernet address. */ + for (i = 0; i < 6; i++) + { + mca_write_pos(slot, 6, i+12); + mca_write_pos(slot, 7, 0); + + printk(" %2.2x", dev->dev_addr[i] = mca_read_pos(slot,3)); + } + + mca_write_pos(slot, 6, 0); + mca_write_pos(slot, 7, 0); + + POS = mca_read_stored_pos(slot, 4); + + if(POS&2) + printk(" : BNC port selected.\n"); + else + printk(" : AUI port selected.\n"); + + POS=inb(dev->base_addr+HOST_CTRL); + POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET; + POS&=~HOST_CTRL_INTE; + outb(POS, dev->base_addr+HOST_CTRL); + /* Reset adapter */ + udelay(100); + /* Reset off */ + POS&=~(HOST_CTRL_ATTN|HOST_CTRL_RESET); + outb(POS, dev->base_addr+HOST_CTRL); + + udelay(300); + + /* + * Grab the IRQ + */ + + err = request_irq(dev->irq, &mc32_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, dev); + if (err) { + release_region(dev->base_addr, MC32_IO_EXTENT); + printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq); + goto err_exit_ports; + } + + memset(lp, 0, sizeof(struct mc32_local)); + lp->slot = slot; + + i=0; + + base = inb(dev->base_addr); + + while(base == 0xFF) + { + i++; + if(i == 1000) + { + printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name); + err = -ENODEV; + goto err_exit_irq; + } + udelay(1000); + if(inb(dev->base_addr+2)&(1<<5)) + base = inb(dev->base_addr); + } + + if(base>0) + { + if(base < 0x0C) + printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1], + base<0x0A?" test failure":""); + else + printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base); + err = -ENODEV; + goto err_exit_irq; + } + + base=0; + for(i=0;i<4;i++) + { + int n=0; + + while(!(inb(dev->base_addr+2)&(1<<5))) + { + n++; + udelay(50); + if(n>100) + { + printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i); + err = -ENODEV; + goto err_exit_irq; + } + } + + base|=(inb(dev->base_addr)<<(8*i)); + } + + lp->exec_box=isa_bus_to_virt(dev->mem_start+base); + + base=lp->exec_box->data[1]<<16|lp->exec_box->data[0]; + + lp->base = dev->mem_start+base; + + lp->rx_box=isa_bus_to_virt(lp->base + lp->exec_box->data[2]); + lp->tx_box=isa_bus_to_virt(lp->base + lp->exec_box->data[3]); + + lp->stats = isa_bus_to_virt(lp->base + lp->exec_box->data[5]); + + /* + * Descriptor chains (card relative) + */ + + lp->tx_chain = lp->exec_box->data[8]; /* Transmit list start offset */ + lp->rx_chain = lp->exec_box->data[10]; /* Receive list start offset */ + lp->tx_len = lp->exec_box->data[9]; /* Transmit list count */ + lp->rx_len = lp->exec_box->data[11]; /* Receive list count */ + + init_MUTEX_LOCKED(&lp->cmd_mutex); + init_completion(&lp->execution_cmd); + init_completion(&lp->xceiver_cmd); + + printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n", + dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base); + + dev->open = mc32_open; + dev->stop = mc32_close; + dev->hard_start_xmit = mc32_send_packet; + dev->get_stats = mc32_get_stats; + dev->set_multicast_list = mc32_set_multicast_list; + dev->tx_timeout = mc32_timeout; + dev->watchdog_timeo = HZ*5; /* Board does all the work */ + dev->ethtool_ops = &netdev_ethtool_ops; + + return 0; + +err_exit_irq: + free_irq(dev->irq, dev); +err_exit_ports: + release_region(dev->base_addr, MC32_IO_EXTENT); + return err; +} + + +/** + * mc32_ready_poll - wait until we can feed it a command + * @dev: The device to wait for + * + * Wait until the card becomes ready to accept a command via the + * command register. This tells us nothing about the completion + * status of any pending commands and takes very little time at all. + */ + +static inline void mc32_ready_poll(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + while(!(inb(ioaddr+HOST_STATUS)&HOST_STATUS_CRR)); +} + + +/** + * mc32_command_nowait - send a command non blocking + * @dev: The 3c527 to issue the command to + * @cmd: The command word to write to the mailbox + * @data: A data block if the command expects one + * @len: Length of the data block + * + * Send a command from interrupt state. If there is a command + * currently being executed then we return an error of -1. It + * simply isn't viable to wait around as commands may be + * slow. This can theoretically be starved on SMP, but it's hard + * to see a realistic situation. We do not wait for the command + * to complete --- we rely on the interrupt handler to tidy up + * after us. + */ + +static int mc32_command_nowait(struct net_device *dev, u16 cmd, void *data, int len) +{ + struct mc32_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int ret = -1; + + if (down_trylock(&lp->cmd_mutex) == 0) + { + lp->cmd_nonblocking=1; + lp->exec_box->mbox=0; + lp->exec_box->mbox=cmd; + memcpy((void *)lp->exec_box->data, data, len); + barrier(); /* the memcpy forgot the volatile so be sure */ + + /* Send the command */ + mc32_ready_poll(dev); + outb(1<<6, ioaddr+HOST_CMD); + + ret = 0; + + /* Interrupt handler will signal mutex on completion */ + } + + return ret; +} + + +/** + * mc32_command - send a command and sleep until completion + * @dev: The 3c527 card to issue the command to + * @cmd: The command word to write to the mailbox + * @data: A data block if the command expects one + * @len: Length of the data block + * + * Sends exec commands in a user context. This permits us to wait around + * for the replies and also to wait for the command buffer to complete + * from a previous command before we execute our command. After our + * command completes we will attempt any pending multicast reload + * we blocked off by hogging the exec buffer. + * + * You feed the card a command, you wait, it interrupts you get a + * reply. All well and good. The complication arises because you use + * commands for filter list changes which come in at bh level from things + * like IPV6 group stuff. + */ + +static int mc32_command(struct net_device *dev, u16 cmd, void *data, int len) +{ + struct mc32_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int ret = 0; + + down(&lp->cmd_mutex); + + /* + * My Turn + */ + + lp->cmd_nonblocking=0; + lp->exec_box->mbox=0; + lp->exec_box->mbox=cmd; + memcpy((void *)lp->exec_box->data, data, len); + barrier(); /* the memcpy forgot the volatile so be sure */ + + mc32_ready_poll(dev); + outb(1<<6, ioaddr+HOST_CMD); + + wait_for_completion(&lp->execution_cmd); + + if(lp->exec_box->mbox&(1<<13)) + ret = -1; + + up(&lp->cmd_mutex); + + /* + * A multicast set got blocked - try it now + */ + + if(lp->mc_reload_wait) + { + mc32_reset_multicast_list(dev); + } + + return ret; +} + + +/** + * mc32_start_transceiver - tell board to restart tx/rx + * @dev: The 3c527 card to issue the command to + * + * This may be called from the interrupt state, where it is used + * to restart the rx ring if the card runs out of rx buffers. + * + * We must first check if it's ok to (re)start the transceiver. See + * mc32_close for details. + */ + +static void mc32_start_transceiver(struct net_device *dev) { + + struct mc32_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + /* Ignore RX overflow on device closure */ + if (lp->xceiver_desired_state==HALTED) + return; + + /* Give the card the offset to the post-EOL-bit RX descriptor */ + mc32_ready_poll(dev); + lp->rx_box->mbox=0; + lp->rx_box->data[0]=lp->rx_ring[prev_rx(lp->rx_ring_tail)].p->next; + outb(HOST_CMD_START_RX, ioaddr+HOST_CMD); + + mc32_ready_poll(dev); + lp->tx_box->mbox=0; + outb(HOST_CMD_RESTRT_TX, ioaddr+HOST_CMD); /* card ignores this on RX restart */ + + /* We are not interrupted on start completion */ +} + + +/** + * mc32_halt_transceiver - tell board to stop tx/rx + * @dev: The 3c527 card to issue the command to + * + * We issue the commands to halt the card's transceiver. In fact, + * after some experimenting we now simply tell the card to + * suspend. When issuing aborts occasionally odd things happened. + * + * We then sleep until the card has notified us that both rx and + * tx have been suspended. + */ + +static void mc32_halt_transceiver(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + mc32_ready_poll(dev); + lp->rx_box->mbox=0; + outb(HOST_CMD_SUSPND_RX, ioaddr+HOST_CMD); + wait_for_completion(&lp->xceiver_cmd); + + mc32_ready_poll(dev); + lp->tx_box->mbox=0; + outb(HOST_CMD_SUSPND_TX, ioaddr+HOST_CMD); + wait_for_completion(&lp->xceiver_cmd); +} + + +/** + * mc32_load_rx_ring - load the ring of receive buffers + * @dev: 3c527 to build the ring for + * + * This initalises the on-card and driver datastructures to + * the point where mc32_start_transceiver() can be called. + * + * The card sets up the receive ring for us. We are required to use the + * ring it provides, although the size of the ring is configurable. + * + * We allocate an sk_buff for each ring entry in turn and + * initalise its house-keeping info. At the same time, we read + * each 'next' pointer in our rx_ring array. This reduces slow + * shared-memory reads and makes it easy to access predecessor + * descriptors. + * + * We then set the end-of-list bit for the last entry so that the + * card will know when it has run out of buffers. + */ + +static int mc32_load_rx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + int i; + u16 rx_base; + volatile struct skb_header *p; + + rx_base=lp->rx_chain; + + for(i=0; i<RX_RING_LEN; i++) { + lp->rx_ring[i].skb=alloc_skb(1532, GFP_KERNEL); + if (lp->rx_ring[i].skb==NULL) { + for (;i>=0;i--) + kfree_skb(lp->rx_ring[i].skb); + return -ENOBUFS; + } + skb_reserve(lp->rx_ring[i].skb, 18); + + p=isa_bus_to_virt(lp->base+rx_base); + + p->control=0; + p->data=isa_virt_to_bus(lp->rx_ring[i].skb->data); + p->status=0; + p->length=1532; + + lp->rx_ring[i].p=p; + rx_base=p->next; + } + + lp->rx_ring[i-1].p->control |= CONTROL_EOL; + + lp->rx_ring_tail=0; + + return 0; +} + + +/** + * mc32_flush_rx_ring - free the ring of receive buffers + * @lp: Local data of 3c527 to flush the rx ring of + * + * Free the buffer for each ring slot. This may be called + * before mc32_load_rx_ring(), eg. on error in mc32_open(). + * Requires rx skb pointers to point to a valid skb, or NULL. + */ + +static void mc32_flush_rx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + int i; + + for(i=0; i < RX_RING_LEN; i++) + { + if (lp->rx_ring[i].skb) { + dev_kfree_skb(lp->rx_ring[i].skb); + lp->rx_ring[i].skb = NULL; + } + lp->rx_ring[i].p=NULL; + } +} + + +/** + * mc32_load_tx_ring - load transmit ring + * @dev: The 3c527 card to issue the command to + * + * This sets up the host transmit data-structures. + * + * First, we obtain from the card it's current postion in the tx + * ring, so that we will know where to begin transmitting + * packets. + * + * Then, we read the 'next' pointers from the on-card tx ring into + * our tx_ring array to reduce slow shared-mem reads. Finally, we + * intitalise the tx house keeping variables. + * + */ + +static void mc32_load_tx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + volatile struct skb_header *p; + int i; + u16 tx_base; + + tx_base=lp->tx_box->data[0]; + + for(i=0 ; i<TX_RING_LEN ; i++) + { + p=isa_bus_to_virt(lp->base+tx_base); + lp->tx_ring[i].p=p; + lp->tx_ring[i].skb=NULL; + + tx_base=p->next; + } + + /* -1 so that tx_ring_head cannot "lap" tx_ring_tail */ + /* see mc32_tx_ring */ + + atomic_set(&lp->tx_count, TX_RING_LEN-1); + atomic_set(&lp->tx_ring_head, 0); + lp->tx_ring_tail=0; +} + + +/** + * mc32_flush_tx_ring - free transmit ring + * @lp: Local data of 3c527 to flush the tx ring of + * + * If the ring is non-empty, zip over the it, freeing any + * allocated skb_buffs. The tx ring house-keeping variables are + * then reset. Requires rx skb pointers to point to a valid skb, + * or NULL. + */ + +static void mc32_flush_tx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + int i; + + for (i=0; i < TX_RING_LEN; i++) + { + if (lp->tx_ring[i].skb) + { + dev_kfree_skb(lp->tx_ring[i].skb); + lp->tx_ring[i].skb = NULL; + } + } + + atomic_set(&lp->tx_count, 0); + atomic_set(&lp->tx_ring_head, 0); + lp->tx_ring_tail=0; +} + + +/** + * mc32_open - handle 'up' of card + * @dev: device to open + * + * The user is trying to bring the card into ready state. This requires + * a brief dialogue with the card. Firstly we enable interrupts and then + * 'indications'. Without these enabled the card doesn't bother telling + * us what it has done. This had me puzzled for a week. + * + * We configure the number of card descriptors, then load the network + * address and multicast filters. Turn on the workaround mode. This + * works around a bug in the 82586 - it asks the firmware to do + * so. It has a performance (latency) hit but is needed on busy + * [read most] lans. We load the ring with buffers then we kick it + * all off. + */ + +static int mc32_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct mc32_local *lp = netdev_priv(dev); + u8 one=1; + u8 regs; + u16 descnumbuffs[2] = {TX_RING_LEN, RX_RING_LEN}; + + /* + * Interrupts enabled + */ + + regs=inb(ioaddr+HOST_CTRL); + regs|=HOST_CTRL_INTE; + outb(regs, ioaddr+HOST_CTRL); + + /* + * Allow ourselves to issue commands + */ + + up(&lp->cmd_mutex); + + + /* + * Send the indications on command + */ + + mc32_command(dev, 4, &one, 2); + + /* + * Poke it to make sure it's really dead. + */ + + mc32_halt_transceiver(dev); + mc32_flush_tx_ring(dev); + + /* + * Ask card to set up on-card descriptors to our spec + */ + + if(mc32_command(dev, 8, descnumbuffs, 4)) { + printk("%s: %s rejected our buffer configuration!\n", + dev->name, cardname); + mc32_close(dev); + return -ENOBUFS; + } + + /* Report new configuration */ + mc32_command(dev, 6, NULL, 0); + + lp->tx_chain = lp->exec_box->data[8]; /* Transmit list start offset */ + lp->rx_chain = lp->exec_box->data[10]; /* Receive list start offset */ + lp->tx_len = lp->exec_box->data[9]; /* Transmit list count */ + lp->rx_len = lp->exec_box->data[11]; /* Receive list count */ + + /* Set Network Address */ + mc32_command(dev, 1, dev->dev_addr, 6); + + /* Set the filters */ + mc32_set_multicast_list(dev); + + if (WORKAROUND_82586) { + u16 zero_word=0; + mc32_command(dev, 0x0D, &zero_word, 2); /* 82586 bug workaround on */ + } + + mc32_load_tx_ring(dev); + + if(mc32_load_rx_ring(dev)) + { + mc32_close(dev); + return -ENOBUFS; + } + + lp->xceiver_desired_state = RUNNING; + + /* And finally, set the ball rolling... */ + mc32_start_transceiver(dev); + + netif_start_queue(dev); + + return 0; +} + + +/** + * mc32_timeout - handle a timeout from the network layer + * @dev: 3c527 that timed out + * + * Handle a timeout on transmit from the 3c527. This normally means + * bad things as the hardware handles cable timeouts and mess for + * us. + * + */ + +static void mc32_timeout(struct net_device *dev) +{ + printk(KERN_WARNING "%s: transmit timed out?\n", dev->name); + /* Try to restart the adaptor. */ + netif_wake_queue(dev); +} + + +/** + * mc32_send_packet - queue a frame for transmit + * @skb: buffer to transmit + * @dev: 3c527 to send it out of + * + * Transmit a buffer. This normally means throwing the buffer onto + * the transmit queue as the queue is quite large. If the queue is + * full then we set tx_busy and return. Once the interrupt handler + * gets messages telling it to reclaim transmit queue entries, we will + * clear tx_busy and the kernel will start calling this again. + * + * We do not disable interrupts or acquire any locks; this can + * run concurrently with mc32_tx_ring(), and the function itself + * is serialised at a higher layer. However, similarly for the + * card itself, we must ensure that we update tx_ring_head only + * after we've established a valid packet on the tx ring (and + * before we let the card "see" it, to prevent it racing with the + * irq handler). + * + */ + +static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + u32 head = atomic_read(&lp->tx_ring_head); + + volatile struct skb_header *p, *np; + + netif_stop_queue(dev); + + if(atomic_read(&lp->tx_count)==0) { + return 1; + } + + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) { + netif_wake_queue(dev); + return 0; + } + + atomic_dec(&lp->tx_count); + + /* P is the last sending/sent buffer as a pointer */ + p=lp->tx_ring[head].p; + + head = next_tx(head); + + /* NP is the buffer we will be loading */ + np=lp->tx_ring[head].p; + + /* We will need this to flush the buffer out */ + lp->tx_ring[head].skb=skb; + + np->length = unlikely(skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; + np->data = isa_virt_to_bus(skb->data); + np->status = 0; + np->control = CONTROL_EOP | CONTROL_EOL; + wmb(); + + /* + * The new frame has been setup; we can now + * let the interrupt handler and card "see" it + */ + + atomic_set(&lp->tx_ring_head, head); + p->control &= ~CONTROL_EOL; + + netif_wake_queue(dev); + return 0; +} + + +/** + * mc32_update_stats - pull off the on board statistics + * @dev: 3c527 to service + * + * + * Query and reset the on-card stats. There's the small possibility + * of a race here, which would result in an underestimation of + * actual errors. As such, we'd prefer to keep all our stats + * collection in software. As a rule, we do. However it can't be + * used for rx errors and collisions as, by default, the card discards + * bad rx packets. + * + * Setting the SAV BP in the rx filter command supposedly + * stops this behaviour. However, testing shows that it only seems to + * enable the collation of on-card rx statistics --- the driver + * never sees an RX descriptor with an error status set. + * + */ + +static void mc32_update_stats(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + volatile struct mc32_stats *st = lp->stats; + + u32 rx_errors=0; + + rx_errors+=lp->net_stats.rx_crc_errors +=st->rx_crc_errors; + st->rx_crc_errors=0; + rx_errors+=lp->net_stats.rx_fifo_errors +=st->rx_overrun_errors; + st->rx_overrun_errors=0; + rx_errors+=lp->net_stats.rx_frame_errors +=st->rx_alignment_errors; + st->rx_alignment_errors=0; + rx_errors+=lp->net_stats.rx_length_errors+=st->rx_tooshort_errors; + st->rx_tooshort_errors=0; + rx_errors+=lp->net_stats.rx_missed_errors+=st->rx_outofresource_errors; + st->rx_outofresource_errors=0; + lp->net_stats.rx_errors=rx_errors; + + /* Number of packets which saw one collision */ + lp->net_stats.collisions+=st->dataC[10]; + st->dataC[10]=0; + + /* Number of packets which saw 2--15 collisions */ + lp->net_stats.collisions+=st->dataC[11]; + st->dataC[11]=0; +} + + +/** + * mc32_rx_ring - process the receive ring + * @dev: 3c527 that needs its receive ring processing + * + * + * We have received one or more indications from the card that a + * receive has completed. The buffer ring thus contains dirty + * entries. We walk the ring by iterating over the circular rx_ring + * array, starting at the next dirty buffer (which happens to be the + * one we finished up at last time around). + * + * For each completed packet, we will either copy it and pass it up + * the stack or, if the packet is near MTU sized, we allocate + * another buffer and flip the old one up the stack. + * + * We must succeed in keeping a buffer on the ring. If necessary we + * will toss a received packet rather than lose a ring entry. Once + * the first uncompleted descriptor is found, we move the + * End-Of-List bit to include the buffers just processed. + * + */ + +static void mc32_rx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + volatile struct skb_header *p; + u16 rx_ring_tail; + u16 rx_old_tail; + int x=0; + + rx_old_tail = rx_ring_tail = lp->rx_ring_tail; + + do + { + p=lp->rx_ring[rx_ring_tail].p; + + if(!(p->status & (1<<7))) { /* Not COMPLETED */ + break; + } + if(p->status & (1<<6)) /* COMPLETED_OK */ + { + + u16 length=p->length; + struct sk_buff *skb; + struct sk_buff *newskb; + + /* Try to save time by avoiding a copy on big frames */ + + if ((length > RX_COPYBREAK) + && ((newskb=dev_alloc_skb(1532)) != NULL)) + { + skb=lp->rx_ring[rx_ring_tail].skb; + skb_put(skb, length); + + skb_reserve(newskb,18); + lp->rx_ring[rx_ring_tail].skb=newskb; + p->data=isa_virt_to_bus(newskb->data); + } + else + { + skb=dev_alloc_skb(length+2); + + if(skb==NULL) { + lp->net_stats.rx_dropped++; + goto dropped; + } + + skb_reserve(skb,2); + memcpy(skb_put(skb, length), + lp->rx_ring[rx_ring_tail].skb->data, length); + } + + skb->protocol=eth_type_trans(skb,dev); + skb->dev=dev; + dev->last_rx = jiffies; + lp->net_stats.rx_packets++; + lp->net_stats.rx_bytes += length; + netif_rx(skb); + } + + dropped: + p->length = 1532; + p->status = 0; + + rx_ring_tail=next_rx(rx_ring_tail); + } + while(x++<48); + + /* If there was actually a frame to be processed, place the EOL bit */ + /* at the descriptor prior to the one to be filled next */ + + if (rx_ring_tail != rx_old_tail) + { + lp->rx_ring[prev_rx(rx_ring_tail)].p->control |= CONTROL_EOL; + lp->rx_ring[prev_rx(rx_old_tail)].p->control &= ~CONTROL_EOL; + + lp->rx_ring_tail=rx_ring_tail; + } +} + + +/** + * mc32_tx_ring - process completed transmits + * @dev: 3c527 that needs its transmit ring processing + * + * + * This operates in a similar fashion to mc32_rx_ring. We iterate + * over the transmit ring. For each descriptor which has been + * processed by the card, we free its associated buffer and note + * any errors. This continues until the transmit ring is emptied + * or we reach a descriptor that hasn't yet been processed by the + * card. + * + */ + +static void mc32_tx_ring(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + volatile struct skb_header *np; + + /* + * We rely on head==tail to mean 'queue empty'. + * This is why lp->tx_count=TX_RING_LEN-1: in order to prevent + * tx_ring_head wrapping to tail and confusing a 'queue empty' + * condition with 'queue full' + */ + + while (lp->tx_ring_tail != atomic_read(&lp->tx_ring_head)) + { + u16 t; + + t=next_tx(lp->tx_ring_tail); + np=lp->tx_ring[t].p; + + if(!(np->status & (1<<7))) + { + /* Not COMPLETED */ + break; + } + lp->net_stats.tx_packets++; + if(!(np->status & (1<<6))) /* Not COMPLETED_OK */ + { + lp->net_stats.tx_errors++; + + switch(np->status&0x0F) + { + case 1: + lp->net_stats.tx_aborted_errors++; + break; /* Max collisions */ + case 2: + lp->net_stats.tx_fifo_errors++; + break; + case 3: + lp->net_stats.tx_carrier_errors++; + break; + case 4: + lp->net_stats.tx_window_errors++; + break; /* CTS Lost */ + case 5: + lp->net_stats.tx_aborted_errors++; + break; /* Transmit timeout */ + } + } + /* Packets are sent in order - this is + basically a FIFO queue of buffers matching + the card ring */ + lp->net_stats.tx_bytes+=lp->tx_ring[t].skb->len; + dev_kfree_skb_irq(lp->tx_ring[t].skb); + lp->tx_ring[t].skb=NULL; + atomic_inc(&lp->tx_count); + netif_wake_queue(dev); + + lp->tx_ring_tail=t; + } + +} + + +/** + * mc32_interrupt - handle an interrupt from a 3c527 + * @irq: Interrupt number + * @dev_id: 3c527 that requires servicing + * @regs: Registers (unused) + * + * + * An interrupt is raised whenever the 3c527 writes to the command + * register. This register contains the message it wishes to send us + * packed into a single byte field. We keep reading status entries + * until we have processed all the control items, but simply count + * transmit and receive reports. When all reports are in we empty the + * transceiver rings as appropriate. This saves the overhead of + * multiple command requests. + * + * Because MCA is level-triggered, we shouldn't miss indications. + * Therefore, we needn't ask the card to suspend interrupts within + * this handler. The card receives an implicit acknowledgment of the + * current interrupt when we read the command register. + * + */ + +static irqreturn_t mc32_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct net_device *dev = dev_id; + struct mc32_local *lp; + int ioaddr, status, boguscount = 0; + int rx_event = 0; + int tx_event = 0; + + if (dev == NULL) { + printk(KERN_WARNING "%s: irq %d for unknown device.\n", cardname, irq); + return IRQ_NONE; + } + + ioaddr = dev->base_addr; + lp = netdev_priv(dev); + + /* See whats cooking */ + + while((inb(ioaddr+HOST_STATUS)&HOST_STATUS_CWR) && boguscount++<2000) + { + status=inb(ioaddr+HOST_CMD); + +#ifdef DEBUG_IRQ + printk("Status TX%d RX%d EX%d OV%d BC%d\n", + (status&7), (status>>3)&7, (status>>6)&1, + (status>>7)&1, boguscount); +#endif + + switch(status&7) + { + case 0: + break; + case 6: /* TX fail */ + case 2: /* TX ok */ + tx_event = 1; + break; + case 3: /* Halt */ + case 4: /* Abort */ + complete(&lp->xceiver_cmd); + break; + default: + printk("%s: strange tx ack %d\n", dev->name, status&7); + } + status>>=3; + switch(status&7) + { + case 0: + break; + case 2: /* RX */ + rx_event=1; + break; + case 3: /* Halt */ + case 4: /* Abort */ + complete(&lp->xceiver_cmd); + break; + case 6: + /* Out of RX buffers stat */ + /* Must restart rx */ + lp->net_stats.rx_dropped++; + mc32_rx_ring(dev); + mc32_start_transceiver(dev); + break; + default: + printk("%s: strange rx ack %d\n", + dev->name, status&7); + } + status>>=3; + if(status&1) + { + /* + * No thread is waiting: we need to tidy + * up ourself. + */ + + if (lp->cmd_nonblocking) { + up(&lp->cmd_mutex); + if (lp->mc_reload_wait) + mc32_reset_multicast_list(dev); + } + else complete(&lp->execution_cmd); + } + if(status&2) + { + /* + * We get interrupted once per + * counter that is about to overflow. + */ + + mc32_update_stats(dev); + } + } + + + /* + * Process the transmit and receive rings + */ + + if(tx_event) + mc32_tx_ring(dev); + + if(rx_event) + mc32_rx_ring(dev); + + return IRQ_HANDLED; +} + + +/** + * mc32_close - user configuring the 3c527 down + * @dev: 3c527 card to shut down + * + * The 3c527 is a bus mastering device. We must be careful how we + * shut it down. It may also be running shared interrupt so we have + * to be sure to silence it properly + * + * We indicate that the card is closing to the rest of the + * driver. Otherwise, it is possible that the card may run out + * of receive buffers and restart the transceiver while we're + * trying to close it. + * + * We abort any receive and transmits going on and then wait until + * any pending exec commands have completed in other code threads. + * In theory we can't get here while that is true, in practice I am + * paranoid + * + * We turn off the interrupt enable for the board to be sure it can't + * intefere with other devices. + */ + +static int mc32_close(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + u8 regs; + u16 one=1; + + lp->xceiver_desired_state = HALTED; + netif_stop_queue(dev); + + /* + * Send the indications on command (handy debug check) + */ + + mc32_command(dev, 4, &one, 2); + + /* Shut down the transceiver */ + + mc32_halt_transceiver(dev); + + /* Ensure we issue no more commands beyond this point */ + + down(&lp->cmd_mutex); + + /* Ok the card is now stopping */ + + regs=inb(ioaddr+HOST_CTRL); + regs&=~HOST_CTRL_INTE; + outb(regs, ioaddr+HOST_CTRL); + + mc32_flush_rx_ring(dev); + mc32_flush_tx_ring(dev); + + mc32_update_stats(dev); + + return 0; +} + + +/** + * mc32_get_stats - hand back stats to network layer + * @dev: The 3c527 card to handle + * + * We've collected all the stats we can in software already. Now + * it's time to update those kept on-card and return the lot. + * + */ + +static struct net_device_stats *mc32_get_stats(struct net_device *dev) +{ + struct mc32_local *lp = netdev_priv(dev); + + mc32_update_stats(dev); + return &lp->net_stats; +} + + +/** + * do_mc32_set_multicast_list - attempt to update multicasts + * @dev: 3c527 device to load the list on + * @retry: indicates this is not the first call. + * + * + * Actually set or clear the multicast filter for this adaptor. The + * locking issues are handled by this routine. We have to track + * state as it may take multiple calls to get the command sequence + * completed. We just keep trying to schedule the loads until we + * manage to process them all. + * + * num_addrs == -1 Promiscuous mode, receive all packets + * + * num_addrs == 0 Normal mode, clear multicast list + * + * num_addrs > 0 Multicast mode, receive normal and MC packets, + * and do best-effort filtering. + * + * See mc32_update_stats() regards setting the SAV BP bit. + * + */ + +static void do_mc32_set_multicast_list(struct net_device *dev, int retry) +{ + struct mc32_local *lp = netdev_priv(dev); + u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */ + + if (dev->flags&IFF_PROMISC) + /* Enable promiscuous mode */ + filt |= 1; + else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10) + { + dev->flags|=IFF_PROMISC; + filt |= 1; + } + else if(dev->mc_count) + { + unsigned char block[62]; + unsigned char *bp; + struct dev_mc_list *dmc=dev->mc_list; + + int i; + + if(retry==0) + lp->mc_list_valid = 0; + if(!lp->mc_list_valid) + { + block[1]=0; + block[0]=dev->mc_count; + bp=block+2; + + for(i=0;i<dev->mc_count;i++) + { + memcpy(bp, dmc->dmi_addr, 6); + bp+=6; + dmc=dmc->next; + } + if(mc32_command_nowait(dev, 2, block, 2+6*dev->mc_count)==-1) + { + lp->mc_reload_wait = 1; + return; + } + lp->mc_list_valid=1; + } + } + + if(mc32_command_nowait(dev, 0, &filt, 2)==-1) + { + lp->mc_reload_wait = 1; + } + else { + lp->mc_reload_wait = 0; + } +} + + +/** + * mc32_set_multicast_list - queue multicast list update + * @dev: The 3c527 to use + * + * Commence loading the multicast list. This is called when the kernel + * changes the lists. It will override any pending list we are trying to + * load. + */ + +static void mc32_set_multicast_list(struct net_device *dev) +{ + do_mc32_set_multicast_list(dev,0); +} + + +/** + * mc32_reset_multicast_list - reset multicast list + * @dev: The 3c527 to use + * + * Attempt the next step in loading the multicast lists. If this attempt + * fails to complete then it will be scheduled and this function called + * again later from elsewhere. + */ + +static void mc32_reset_multicast_list(struct net_device *dev) +{ + do_mc32_set_multicast_list(dev,1); +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "MCA 0x%lx", dev->base_addr); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return mc32_debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 level) +{ + mc32_debug = level; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, +}; + +#ifdef MODULE + +static struct net_device *this_device; + +/** + * init_module - entry point + * + * Probe and locate a 3c527 card. This really should probe and locate + * all the 3c527 cards in the machine not just one of them. Yes you can + * insmod multiple modules for now but it's a hack. + */ + +int init_module(void) +{ + this_device = mc32_probe(-1); + if (IS_ERR(this_device)) + return PTR_ERR(this_device); + return 0; +} + +/** + * cleanup_module - free resources for an unload + * + * Unloading time. We release the MCA bus resources and the interrupt + * at which point everything is ready to unload. The card must be stopped + * at this point or we would not have been called. When we unload we + * leave the card stopped but not totally shut down. When the card is + * initialized it must be rebooted or the rings reloaded before any + * transmit operations are allowed to start scribbling into memory. + */ + +void cleanup_module(void) +{ + unregister_netdev(this_device); + cleanup_card(this_device); + free_netdev(this_device); +} + +#endif /* MODULE */ |