aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/3c59x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c59x.c')
-rw-r--r--drivers/net/3c59x.c265
1 files changed, 107 insertions, 158 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 5d11a06ecb2..70f63891b19 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -196,8 +196,6 @@
#define DRV_NAME "3c59x"
-#define DRV_VERSION "LK1.1.19"
-#define DRV_RELDATE "10 Nov 2002"
@@ -275,10 +273,8 @@ static char version[] __devinitdata =
DRV_NAME ": Donald Becker and others. www.scyld.com/network/vortex.html\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
-MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver "
- DRV_VERSION " " DRV_RELDATE);
+MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
/* Operational parameter that usually are not changed. */
@@ -904,7 +900,6 @@ static void acpi_set_WOL(struct net_device *dev);
static struct ethtool_ops vortex_ethtool_ops;
static void set_8021q_mode(struct net_device *dev, int enable);
-
/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
/* Option count limit only -- unlimited interfaces are supported. */
#define MAX_UNITS 8
@@ -919,8 +914,6 @@ static int global_full_duplex = -1;
static int global_enable_wol = -1;
static int global_use_mmio = -1;
-/* #define dev_alloc_skb dev_alloc_skb_debug */
-
/* Variables to work-around the Compaq PCI BIOS32 problem. */
static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
static struct net_device *compaq_net_device;
@@ -976,7 +969,7 @@ static void poll_vortex(struct net_device *dev)
#ifdef CONFIG_PM
-static int vortex_suspend (struct pci_dev *pdev, pm_message_t state)
+static int vortex_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
@@ -994,7 +987,7 @@ static int vortex_suspend (struct pci_dev *pdev, pm_message_t state)
return 0;
}
-static int vortex_resume (struct pci_dev *pdev)
+static int vortex_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct vortex_private *vp = netdev_priv(dev);
@@ -1027,8 +1020,8 @@ static struct eisa_device_id vortex_eisa_ids[] = {
{ "" }
};
-static int vortex_eisa_probe (struct device *device);
-static int vortex_eisa_remove (struct device *device);
+static int vortex_eisa_probe(struct device *device);
+static int vortex_eisa_remove(struct device *device);
static struct eisa_driver vortex_eisa_driver = {
.id_table = vortex_eisa_ids,
@@ -1039,12 +1032,12 @@ static struct eisa_driver vortex_eisa_driver = {
}
};
-static int vortex_eisa_probe (struct device *device)
+static int vortex_eisa_probe(struct device *device)
{
void __iomem *ioaddr;
struct eisa_device *edev;
- edev = to_eisa_device (device);
+ edev = to_eisa_device(device);
if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
return -EBUSY;
@@ -1053,7 +1046,7 @@ static int vortex_eisa_probe (struct device *device)
if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
edev->id.driver_data, vortex_cards_found)) {
- release_region (edev->base_addr, VORTEX_TOTAL_SIZE);
+ release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
return -ENODEV;
}
@@ -1062,15 +1055,15 @@ static int vortex_eisa_probe (struct device *device)
return 0;
}
-static int vortex_eisa_remove (struct device *device)
+static int vortex_eisa_remove(struct device *device)
{
struct eisa_device *edev;
struct net_device *dev;
struct vortex_private *vp;
void __iomem *ioaddr;
- edev = to_eisa_device (device);
- dev = eisa_get_drvdata (edev);
+ edev = to_eisa_device(device);
+ dev = eisa_get_drvdata(edev);
if (!dev) {
printk("vortex_eisa_remove called for Compaq device!\n");
@@ -1080,30 +1073,34 @@ static int vortex_eisa_remove (struct device *device)
vp = netdev_priv(dev);
ioaddr = vp->ioaddr;
- unregister_netdev (dev);
- iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD);
- release_region (dev->base_addr, VORTEX_TOTAL_SIZE);
+ unregister_netdev(dev);
+ iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
+ release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
- free_netdev (dev);
+ free_netdev(dev);
return 0;
}
#endif
/* returns count found (>= 0), or negative on error */
-static int __init vortex_eisa_init (void)
+static int __init vortex_eisa_init(void)
{
int eisa_found = 0;
int orig_cards_found = vortex_cards_found;
#ifdef CONFIG_EISA
- if (eisa_driver_register (&vortex_eisa_driver) >= 0) {
- /* Because of the way EISA bus is probed, we cannot assume
- * any device have been found when we exit from
- * eisa_driver_register (the bus root driver may not be
- * initialized yet). So we blindly assume something was
- * found, and let the sysfs magic happend... */
-
- eisa_found = 1;
+ int err;
+
+ err = eisa_driver_register (&vortex_eisa_driver);
+ if (!err) {
+ /*
+ * Because of the way EISA bus is probed, we cannot assume
+ * any device have been found when we exit from
+ * eisa_driver_register (the bus root driver may not be
+ * initialized yet). So we blindly assume something was
+ * found, and let the sysfs magic happend...
+ */
+ eisa_found = 1;
}
#endif
@@ -1117,7 +1114,7 @@ static int __init vortex_eisa_init (void)
}
/* returns count (>= 0), or negative on error */
-static int __devinit vortex_init_one (struct pci_dev *pdev,
+static int __devinit vortex_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int rc, unit, pci_bar;
@@ -1125,7 +1122,7 @@ static int __devinit vortex_init_one (struct pci_dev *pdev,
void __iomem *ioaddr;
/* wake up and enable device */
- rc = pci_enable_device (pdev);
+ rc = pci_enable_device(pdev);
if (rc < 0)
goto out;
@@ -1147,7 +1144,7 @@ static int __devinit vortex_init_one (struct pci_dev *pdev,
rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
ent->driver_data, unit);
if (rc < 0) {
- pci_disable_device (pdev);
+ pci_disable_device(pdev);
goto out;
}
@@ -1232,7 +1229,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (print_info)
printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
- printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n",
+ printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
print_name,
pdev ? "PCI" : "EISA",
vci->name,
@@ -1262,7 +1259,7 @@ static int __devinit vortex_probe1(struct device *gendev,
/* enable bus-mastering if necessary */
if (vci->flags & PCI_USES_MASTER)
- pci_set_master (pdev);
+ pci_set_master(pdev);
if (vci->drv_flags & IS_VORTEX) {
u8 pci_latency;
@@ -1306,7 +1303,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (pdev)
pci_set_drvdata(pdev, dev);
if (edev)
- eisa_set_drvdata (edev, dev);
+ eisa_set_drvdata(edev, dev);
vp->media_override = 7;
if (option >= 0) {
@@ -1331,7 +1328,7 @@ static int __devinit vortex_probe1(struct device *gendev,
vp->enable_wol = 1;
}
- vp->force_fd = vp->full_duplex;
+ vp->mii.force_media = vp->full_duplex;
vp->options = option;
/* Read the station address from the EEPROM. */
EL3WINDOW(0);
@@ -1621,6 +1618,46 @@ issue_and_wait(struct net_device *dev, int cmd)
}
static void
+vortex_set_duplex(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ printk(KERN_INFO "%s: setting %s-duplex.\n",
+ dev->name, (vp->full_duplex) ? "full" : "half");
+
+ EL3WINDOW(3);
+ /* Set the full-duplex bit. */
+ iowrite16(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+ (vp->large_frames ? 0x40 : 0) |
+ ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+ 0x100 : 0),
+ ioaddr + Wn3_MAC_Ctrl);
+
+ issue_and_wait(dev, TxReset);
+ /*
+ * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+ */
+ issue_and_wait(dev, RxReset|0x04);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ unsigned int ok_to_print = 0;
+
+ if (vortex_debug > 3)
+ ok_to_print = 1;
+
+ if (mii_check_media(&vp->mii, ok_to_print, init)) {
+ vp->full_duplex = vp->mii.full_duplex;
+ vortex_set_duplex(dev);
+ } else if (init) {
+ vortex_set_duplex(dev);
+ }
+}
+
+static void
vortex_up(struct net_device *dev)
{
struct vortex_private *vp = netdev_priv(dev);
@@ -1680,53 +1717,20 @@ vortex_up(struct net_device *dev)
printk(KERN_DEBUG "%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
- vp->full_duplex = vp->force_fd;
+ vp->full_duplex = vp->mii.force_media;
config = BFINS(config, dev->if_port, 20, 4);
if (vortex_debug > 6)
printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
+ netif_carrier_off(dev);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
- int mii_reg1, mii_reg5;
EL3WINDOW(4);
- /* Read BMSR (reg1) only to clear old status. */
- mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
- mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
- if (mii_reg5 == 0xffff || mii_reg5 == 0x0000) {
- netif_carrier_off(dev); /* No MII device or no link partner report */
- } else {
- mii_reg5 &= vp->advertising;
- if ((mii_reg5 & 0x0100) != 0 /* 100baseTx-FD */
- || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */
- vp->full_duplex = 1;
- netif_carrier_on(dev);
- }
- vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
- if (vortex_debug > 1)
- printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x,"
- " info1 %04x, setting %s-duplex.\n",
- dev->name, vp->phys[0],
- mii_reg1, mii_reg5,
- vp->info1, ((vp->info1 & 0x8000) || vp->full_duplex) ? "full" : "half");
- EL3WINDOW(3);
- }
-
- /* Set the full-duplex bit. */
- iowrite16( ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
- (vp->large_frames ? 0x40 : 0) |
- ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
- ioaddr + Wn3_MAC_Ctrl);
-
- if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: vortex_up() InternalConfig %8.8x.\n",
- dev->name, config);
+ vortex_check_media(dev, 1);
}
+ else
+ vortex_set_duplex(dev);
- issue_and_wait(dev, TxReset);
- /*
- * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
- */
- issue_and_wait(dev, RxReset|0x04);
iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
@@ -1801,7 +1805,6 @@ vortex_up(struct net_device *dev)
set_8021q_mode(dev, 1);
iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
-// issue_and_wait(dev, SetTxStart|0x07ff);
iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
/* Allow status bits to be seen. */
@@ -1888,7 +1891,7 @@ vortex_timer(unsigned long data)
void __iomem *ioaddr = vp->ioaddr;
int next_tick = 60*HZ;
int ok = 0;
- int media_status, mii_status, old_window;
+ int media_status, old_window;
if (vortex_debug > 2) {
printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
@@ -1896,8 +1899,6 @@ vortex_timer(unsigned long data)
printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
}
- if (vp->medialock)
- goto leave_media_alone;
disable_irq(dev->irq);
old_window = ioread16(ioaddr + EL3_CMD) >> 13;
EL3WINDOW(4);
@@ -1920,44 +1921,9 @@ vortex_timer(unsigned long data)
break;
case XCVR_MII: case XCVR_NWAY:
{
- spin_lock_bh(&vp->lock);
- mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
- if (!(mii_status & BMSR_LSTATUS)) {
- /* Re-read to get actual link status */
- mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
- }
ok = 1;
- if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n",
- dev->name, mii_status);
- if (mii_status & BMSR_LSTATUS) {
- int mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
- if (! vp->force_fd && mii_reg5 != 0xffff) {
- int duplex;
-
- mii_reg5 &= vp->advertising;
- duplex = (mii_reg5&0x0100) || (mii_reg5 & 0x01C0) == 0x0040;
- if (vp->full_duplex != duplex) {
- vp->full_duplex = duplex;
- printk(KERN_INFO "%s: Setting %s-duplex based on MII "
- "#%d link partner capability of %4.4x.\n",
- dev->name, vp->full_duplex ? "full" : "half",
- vp->phys[0], mii_reg5);
- /* Set the full-duplex bit. */
- EL3WINDOW(3);
- iowrite16( (vp->full_duplex ? 0x20 : 0) |
- (vp->large_frames ? 0x40 : 0) |
- ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
- ioaddr + Wn3_MAC_Ctrl);
- if (vortex_debug > 1)
- printk(KERN_DEBUG "Setting duplex in Wn3_MAC_Ctrl\n");
- /* AKPM: bug: should reset Tx and Rx after setting Duplex. Page 180 */
- }
- }
- netif_carrier_on(dev);
- } else {
- netif_carrier_off(dev);
- }
+ spin_lock_bh(&vp->lock);
+ vortex_check_media(dev, 0);
spin_unlock_bh(&vp->lock);
}
break;
@@ -1967,7 +1933,14 @@ vortex_timer(unsigned long data)
dev->name, media_tbl[dev->if_port].name, media_status);
ok = 1;
}
- if ( ! ok) {
+
+ if (!netif_carrier_ok(dev))
+ next_tick = 5*HZ;
+
+ if (vp->medialock)
+ goto leave_media_alone;
+
+ if (!ok) {
unsigned int config;
do {
@@ -2000,14 +1973,14 @@ vortex_timer(unsigned long data)
printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
/* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */
}
- EL3WINDOW(old_window);
- enable_irq(dev->irq);
leave_media_alone:
if (vortex_debug > 2)
printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
+ EL3WINDOW(old_window);
+ enable_irq(dev->irq);
mod_timer(&vp->timer, RUN_AT(next_tick));
if (vp->deferred)
iowrite16(FakeIntr, ioaddr + EL3_CMD);
@@ -2202,7 +2175,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (vp->bus_master) {
/* Set the bus-master controller to transfer the packet. */
int len = (skb->len + 3) & ~3;
- iowrite32( vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
+ iowrite32(vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
ioaddr + Wn7_MasterAddr);
iowrite16(len, ioaddr + Wn7_MasterLen);
vp->tx_skb = skb;
@@ -2979,20 +2952,6 @@ static int vortex_nway_reset(struct net_device *dev)
return rc;
}
-static u32 vortex_get_link(struct net_device *dev)
-{
- struct vortex_private *vp = netdev_priv(dev);
- void __iomem *ioaddr = vp->ioaddr;
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&vp->lock, flags);
- EL3WINDOW(4);
- rc = mii_link_ok(&vp->mii);
- spin_unlock_irqrestore(&vp->lock, flags);
- return rc;
-}
-
static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct vortex_private *vp = netdev_priv(dev);
@@ -3073,7 +3032,6 @@ static void vortex_get_drvinfo(struct net_device *dev,
struct vortex_private *vp = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
if (VORTEX_PCI(vp)) {
strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
} else {
@@ -3094,9 +3052,9 @@ static struct ethtool_ops vortex_ethtool_ops = {
.get_stats_count = vortex_get_stats_count,
.get_settings = vortex_get_settings,
.set_settings = vortex_set_settings,
- .get_link = vortex_get_link,
+ .get_link = ethtool_op_get_link,
.nway_reset = vortex_nway_reset,
- .get_perm_addr = ethtool_op_get_perm_addr,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
#ifdef CONFIG_PCI
@@ -3297,7 +3255,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
}
return;
}
-
+
/* ACPI: Advanced Configuration and Power Interface. */
/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */
static void acpi_set_WOL(struct net_device *dev)
@@ -3321,7 +3279,7 @@ static void acpi_set_WOL(struct net_device *dev)
}
-static void __devexit vortex_remove_one (struct pci_dev *pdev)
+static void __devexit vortex_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct vortex_private *vp;
@@ -3377,7 +3335,7 @@ static int vortex_have_pci;
static int vortex_have_eisa;
-static int __init vortex_init (void)
+static int __init vortex_init(void)
{
int pci_rc, eisa_rc;
@@ -3393,14 +3351,14 @@ static int __init vortex_init (void)
}
-static void __exit vortex_eisa_cleanup (void)
+static void __exit vortex_eisa_cleanup(void)
{
struct vortex_private *vp;
void __iomem *ioaddr;
#ifdef CONFIG_EISA
/* Take care of the EISA devices */
- eisa_driver_unregister (&vortex_eisa_driver);
+ eisa_driver_unregister(&vortex_eisa_driver);
#endif
if (compaq_net_device) {
@@ -3408,33 +3366,24 @@ static void __exit vortex_eisa_cleanup (void)
ioaddr = ioport_map(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
- unregister_netdev (compaq_net_device);
- iowrite16 (TotalReset, ioaddr + EL3_CMD);
+ unregister_netdev(compaq_net_device);
+ iowrite16(TotalReset, ioaddr + EL3_CMD);
release_region(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
- free_netdev (compaq_net_device);
+ free_netdev(compaq_net_device);
}
}
-static void __exit vortex_cleanup (void)
+static void __exit vortex_cleanup(void)
{
if (vortex_have_pci)
- pci_unregister_driver (&vortex_driver);
+ pci_unregister_driver(&vortex_driver);
if (vortex_have_eisa)
- vortex_eisa_cleanup ();
+ vortex_eisa_cleanup();
}
module_init(vortex_init);
module_exit(vortex_cleanup);
-
-
-/*
- * Local variables:
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */