diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 141 |
1 files changed, 83 insertions, 58 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 79eade7e9d9..38ac6796fc4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -190,7 +190,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on NET_ETHERNET && AVR32 + depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263) select MII help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -235,16 +235,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config OAKNET - tristate "National DP83902AV (Oak ethernet) support" - depends on NET_ETHERNET && PPC && BROKEN - select CRC32 - help - Say Y if your machine has this type of Ethernet network card. - - To compile this driver as a module, choose M here: the module - will be called oaknet. - config ARIADNE tristate "Ariadne support" depends on NET_ETHERNET && ZORRO @@ -1155,21 +1145,6 @@ config SEEQ8005 <file:Documentation/networking/net-modules.txt>. The module will be called seeq8005. -config SKMC - tristate "SKnet MCA support" - depends on NET_ETHERNET && MCA && BROKEN - ---help--- - These are Micro Channel Ethernet adapters. You need to say Y to "MCA - support" in order to use this driver. Supported cards are the SKnet - Junior MC2 and the SKnet MC2(+). The driver automatically - distinguishes between the two cards. Note that using multiple boards - of different type hasn't been tested with this driver. Say Y if you - have one of these Ethernet adapters. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called sk_mca. - config NE2_MCA tristate "NE/2 (ne2000 MCA version) support" depends on NET_ETHERNET && MCA_LEGACY @@ -1309,8 +1284,8 @@ config PCNET32 will be called pcnet32. config PCNET32_NAPI - bool "Use RX polling (NAPI) (EXPERIMENTAL)" - depends on PCNET32 && EXPERIMENTAL + bool "Use RX polling (NAPI)" + depends on PCNET32 help NAPI is a new driver API designed to reduce CPU and interrupt load when the driver is receiving lots of packets from the card. It is @@ -1788,6 +1763,18 @@ config LAN_SAA9730 workstations. See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>. +config SC92031 + tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL + select CRC32 + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you + have one of these, say Y here. + + To compile this driver as a module, choose M here: the module + will be called sc92031. This is recommended. + config NET_POCKET bool "Pocket and portable adapters" depends on NET_ETHERNET && PARPORT @@ -2138,14 +2125,16 @@ config SKY2 will be called sky2. This is recommended. config SK98LIN - tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" + tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" depends on PCI ---help--- Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter. - This driver supports the original Yukon chipset. A cleaner driver is - also available (skge) which seems to work better than this one. + This driver supports the original Yukon chipset. This driver is + deprecated and will be removed from the kernel in the near future, + it has been replaced by the skge driver. skge is cleaner and + seems to work better. This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. @@ -2318,27 +2307,6 @@ config MV643XX_ETH chipset which is used in the Momenco Ocelot C and Jaguar ATX and Pegasos II, amongst other PPC and MIPS boards. -config MV643XX_ETH_0 - bool "MV-643XX Port 0" - depends on MV643XX_ETH - help - This enables support for Port 0 of the Marvell MV643XX Gigabit - Ethernet. - -config MV643XX_ETH_1 - bool "MV-643XX Port 1" - depends on MV643XX_ETH - help - This enables support for Port 1 of the Marvell MV643XX Gigabit - Ethernet. - -config MV643XX_ETH_2 - bool "MV-643XX Port 2" - depends on MV643XX_ETH - help - This enables support for Port 2 of the Marvell MV643XX Gigabit - Ethernet. - config QLA3XXX tristate "QLogic QLA3XXX Network Driver Support" depends on PCI @@ -2348,6 +2316,17 @@ config QLA3XXX To compile this driver as a module, choose M here: the module will be called qla3xxx. +config ATL1 + tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + help + This driver supports the Attansic L1 gigabit ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl1. + endmenu # @@ -2392,6 +2371,24 @@ config CHELSIO_T1_NAPI NAPI is a driver API designed to reduce CPU and interrupt load when the driver is receiving lots of packets from the card. +config CHELSIO_T3 + tristate "Chelsio Communications T3 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio T3-based gigabit and 10Gb Ethernet + adapters. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.htm>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module, choose M here: the module + will be called cxgb3. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS @@ -2488,6 +2485,13 @@ config NETXEN_NIC help This enables the support for NetXen's Gigabit Ethernet card. +config PASEMI_MAC + tristate "PA Semi 1/10Gbit MAC" + depends on PPC64 && PCI + help + This driver supports the on-chip 1/10Gbit Ethernet controller on + PA Semi's PWRficient line of chips. + endmenu source "drivers/net/tokenring/Kconfig" @@ -2522,7 +2526,7 @@ config RIONET_RX_SIZE config FDDI bool "FDDI driver support" - depends on (PCI || EISA) + depends on (PCI || EISA || TC) help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can @@ -2532,15 +2536,36 @@ config FDDI will say N. config DEFXX - tristate "Digital DEFEA and DEFPA adapter support" - depends on FDDI && (PCI || EISA) - help - This is support for the DIGITAL series of EISA (DEFEA) and PCI - (DEFPA) controllers which can connect you to a local FDDI network. + tristate "Digital DEFTA/DEFEA/DEFPA adapter support" + depends on FDDI && (PCI || EISA || TC) + ---help--- + This is support for the DIGITAL series of TURBOchannel (DEFTA), + EISA (DEFEA) and PCI (DEFPA) controllers which can connect you + to a local FDDI network. + + To compile this driver as a module, choose M here: the module + will be called defxx. If unsure, say N. + +config DEFXX_MMIO + bool + prompt "Use MMIO instead of PIO" if PCI || EISA + depends on DEFXX + default n if PCI || EISA + default y + ---help--- + This instructs the driver to use EISA or PCI memory-mapped I/O + (MMIO) as appropriate instead of programmed I/O ports (PIO). + Enabling this gives an improvement in processing time in parts + of the driver, but it may cause problems with EISA (DEFEA) + adapters. TURBOchannel does not have the concept of I/O ports, + so MMIO is always used for these (DEFTA) adapters. + + If unsure, say N. config SKFP tristate "SysKonnect FDDI PCI support" depends on FDDI && PCI + select BITREVERSE ---help--- Say Y here if you have a SysKonnect FDDI PCI adapter. The following adapters are supported by this driver: |