diff options
Diffstat (limited to 'drivers/net/bonding/bond_3ad.c')
-rw-r--r-- | drivers/net/bonding/bond_3ad.c | 106 |
1 files changed, 47 insertions, 59 deletions
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index d2f34d5a808..f3f5825469d 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -18,38 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Amir Noam <amir.noam at intel dot com> - * - Added support for lacp_rate module param. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Based on discussion on mailing list, changed locking scheme - * to use lock/unlock or lock_bh/unlock_bh appropriately instead - * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing - * hidden bugs and solves system hangs that occurred due to the fact - * that holding lock_irqsave doesn't prevent softirqs from running. - * This also increases total throughput since interrupts are not - * blocked on each transmitted packets or monitor timeout. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * - * 2003/05/20 - Amir Noam <amir.noam at intel dot com> - * - Fix long fail over time when releasing last slave of an active - * aggregator - send LACPDU on unbind of slave to tell partner this - * port is no longer aggregatable. - * - * 2003/06/25 - Tsippy Mendelson <tsippy.mendelson at intel dot com> - * - Send LACPDU as highest priority packet to further fix the above - * problem on very high Tx traffic load where packets may get dropped - * by the slave. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes */ //#define BONDING_DEBUG 1 @@ -1198,10 +1166,10 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) // detect loopback situation if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) { // INFO_RECEIVED_LOOPBACK_FRAMES - printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n", - port->slave->dev->name); - printk(KERN_ERR "Check the configuration to verify that all Adapters " - "are connected to 802.3ad compliant switch ports\n"); + printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on " + "adapter (%s). Check the configuration to verify that all " + "Adapters are connected to 802.3ad compliant switch ports\n", + port->slave->dev->master->name, port->slave->dev->name); __release_rx_machine_lock(port); return; } @@ -1378,8 +1346,9 @@ static void ad_port_selection_logic(struct port *port) } } if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list - printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was " + printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was " "related to aggregator %d but was not on its port list\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name, port->aggregator->aggregator_identifier); } @@ -1450,7 +1419,8 @@ static void ad_port_selection_logic(struct port *port) dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); } else { - printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n", + printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name); } } @@ -1582,8 +1552,9 @@ static void ad_agg_selection_logic(struct aggregator *aggregator) // check if any partner replys if (best_aggregator->is_individual) { - printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner " - "for any adapters in the bond\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from " + "the link partner for any adapters in the bond\n", + best_aggregator->slave->dev->master->name); } // check if there are more than one aggregator @@ -1915,7 +1886,8 @@ int bond_3ad_bind_slave(struct slave *slave) struct aggregator *aggregator; if (bond == NULL) { - printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name); + printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n", + slave->dev->master->name, slave->dev->name); return -1; } @@ -1990,7 +1962,9 @@ void bond_3ad_unbind_slave(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to " + "unbind an uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2021,7 +1995,8 @@ void bond_3ad_unbind_slave(struct slave *slave) dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { - printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + aggregator->slave->dev->master->name); // select new active aggregator select_new_active_agg = 1; } @@ -2051,15 +2026,17 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_agg_selection_logic(__get_first_agg(port)); } } else { - printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, " - "and could not find a new aggregator for its ports\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, " + "and could not find a new aggregator for its ports\n", + slave->dev->master->name); } } else { // in case that the only port related to this aggregator is the one we want to remove select_new_active_agg = aggregator->is_active; // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2085,7 +2062,8 @@ void bond_3ad_unbind_slave(struct slave *slave) // clear the aggregator ad_clear_agg(temp_aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2131,7 +2109,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // select the active aggregator for the bond if ((port = __get_first_port(bond))) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is " + "uninitialized\n", bond->dev->name); goto re_arm; } @@ -2143,7 +2122,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // for each port run the state machines for (port = __get_first_port(bond); port; port = __get_next_port(port)) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized " + "port\n", bond->dev->name); goto re_arm; } @@ -2184,7 +2164,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u port = &(SLAVE_AD_INFO(slave).port); if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is " + "uninitialized\n", slave->dev->name, slave->dev->master->name); return; } @@ -2230,8 +2211,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: speed " + "changed for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2257,8 +2239,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed " + "for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2285,8 +2268,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for " + "uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2363,7 +2347,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: " + "bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } @@ -2372,7 +2357,9 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) if (slaves_in_agg == 0) { /*the aggregator is empty*/ - printk(KERN_DEBUG "ERROR: active aggregator is empty\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: active " + "aggregator is empty\n", + dev->name); goto out; } @@ -2390,7 +2377,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (slave_agg_no >= 0) { - printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id); + printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on " + "for aggregator ID %d\n", dev->name, agg_id); goto out; } |