diff options
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 128 |
1 files changed, 47 insertions, 81 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 8424a8e4cbb..619c89218b4 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.3.15-k2"DRIVERNAPI +#define DRV_VERSION "7.3.20-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -990,16 +990,12 @@ e1000_probe(struct pci_dev *pdev, netdev->features &= ~NETIF_F_HW_VLAN_FILTER; } -#ifdef NETIF_F_TSO if ((adapter->hw.mac_type >= e1000_82544) && (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO6 if (adapter->hw.mac_type > e1000_82547_rev_2) netdev->features |= NETIF_F_TSO6; -#endif -#endif if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -2583,15 +2579,22 @@ e1000_watchdog(unsigned long data) if (link) { if (!netif_carrier_ok(netdev)) { + uint32_t ctrl; boolean_t txb2b = 1; e1000_get_speed_and_duplex(&adapter->hw, &adapter->link_speed, &adapter->link_duplex); - DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n", - adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "Full Duplex" : "Half Duplex"); + ctrl = E1000_READ_REG(&adapter->hw, CTRL); + DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, " + "Flow Control: %s\n", + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & + E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl & + E1000_CTRL_RFCE) ? "RX" : ((ctrl & + E1000_CTRL_TFCE) ? "TX" : "None" ))); /* tweak tx_queue_len according to speed/duplex * and adjust the timeout factor */ @@ -2619,7 +2622,6 @@ e1000_watchdog(unsigned long data) E1000_WRITE_REG(&adapter->hw, TARC0, tarc0); } -#ifdef NETIF_F_TSO /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ if (!adapter->tso_force && @@ -2630,22 +2632,17 @@ e1000_watchdog(unsigned long data) DPRINTK(PROBE,INFO, "10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; -#ifdef NETIF_F_TSO6 netdev->features &= ~NETIF_F_TSO6; -#endif break; case SPEED_1000: netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO6 netdev->features |= NETIF_F_TSO6; -#endif break; default: /* oops */ break; } } -#endif /* enable transmits in the hardware, need to do this * after setting TARC0 */ @@ -2875,7 +2872,6 @@ static int e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, struct sk_buff *skb) { -#ifdef NETIF_F_TSO struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; unsigned int i; @@ -2904,7 +2900,6 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb->h.raw - skb->data - 1; -#ifdef NETIF_F_TSO6 } else if (skb->protocol == htons(ETH_P_IPV6)) { skb->nh.ipv6h->payload_len = 0; skb->h.th->check = @@ -2914,7 +2909,6 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, IPPROTO_TCP, 0); ipcse = 0; -#endif } ipcss = skb->nh.raw - skb->data; ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data; @@ -2947,8 +2941,6 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, return TRUE; } -#endif - return FALSE; } @@ -2968,8 +2960,9 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, buffer_info = &tx_ring->buffer_info[i]; context_desc = E1000_CONTEXT_DESC(*tx_ring, i); + context_desc->lower_setup.ip_config = 0; context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; + context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); @@ -3005,7 +2998,6 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, while (len) { buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); -#ifdef NETIF_F_TSO /* Workaround for Controller erratum -- * descriptor for non-tso packet in a linear SKB that follows a * tso gets written back prematurely before the data is fully @@ -3020,7 +3012,6 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, * in TSO mode. Append 4-byte sentinel desc */ if (unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; -#endif /* work-around for errata 10 and it applies * to all controllers in PCI-X mode * The fix is to make sure that the first descriptor of a @@ -3062,12 +3053,10 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, while (len) { buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); -#ifdef NETIF_F_TSO /* Workaround for premature desc write-backs * in TSO mode. Append 4-byte sentinel desc */ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8)) size -= 4; -#endif /* Workaround for potential 82544 hang in PCI-X. * Avoid terminating buffers within evenly-aligned * dwords. */ @@ -3292,7 +3281,6 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (adapter->hw.mac_type >= e1000_82571) max_per_txd = 8192; -#ifdef NETIF_F_TSO mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before @@ -3346,16 +3334,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; -#else - if (skb->ip_summed == CHECKSUM_PARTIAL) - count++; -#endif -#ifdef NETIF_F_TSO /* Controller Erratum workaround */ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb)) count++; -#endif count += TXD_USE_COUNT(len, max_txd_pwr); @@ -3765,8 +3747,8 @@ e1000_update_stats(struct e1000_adapter *adapter) * @data: pointer to a network interface device structure **/ -static -irqreturn_t e1000_intr_msi(int irq, void *data) +static irqreturn_t +e1000_intr_msi(int irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3774,49 +3756,27 @@ irqreturn_t e1000_intr_msi(int irq, void *data) #ifndef CONFIG_E1000_NAPI int i; #endif + uint32_t icr = E1000_READ_REG(hw, ICR); - /* this code avoids the read of ICR but has to get 1000 interrupts - * at every link change event before it will notice the change */ - if (++adapter->detect_link >= 1000) { - uint32_t icr = E1000_READ_REG(hw, ICR); #ifdef CONFIG_E1000_NAPI - /* read ICR disables interrupts using IAM, so keep up with our - * enable/disable accounting */ - atomic_inc(&adapter->irq_sem); + /* read ICR disables interrupts using IAM, so keep up with our + * enable/disable accounting */ + atomic_inc(&adapter->irq_sem); #endif - adapter->detect_link = 0; - if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) && - (icr & E1000_ICR_INT_ASSERTED)) { - hw->get_link_status = 1; - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives here in the ISR and - * reset adapter in watchdog - */ - if (netif_carrier_ok(netdev) && - (adapter->hw.mac_type == e1000_80003es2lan)) { - /* disable receives */ - uint32_t rctl = E1000_READ_REG(hw, RCTL); - E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->flags)) - mod_timer(&adapter->watchdog_timer, - jiffies + 1); + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->get_link_status = 1; + /* 80003ES2LAN workaround-- For packet buffer work-around on + * link down event; disable receives here in the ISR and reset + * adapter in watchdog */ + if (netif_carrier_ok(netdev) && + (adapter->hw.mac_type == e1000_80003es2lan)) { + /* disable receives */ + uint32_t rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); } - } else { - E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ | - E1000_ICR_LSC))); - /* bummer we have to flush here, but things break otherwise as - * some event appears to be lost or delayed and throughput - * drops. In almost all tests this flush is un-necessary */ - E1000_WRITE_FLUSH(hw); -#ifdef CONFIG_E1000_NAPI - /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are - * masked. No need for the IMC write, but it does mean we - * should account for it ASAP. */ - atomic_inc(&adapter->irq_sem); -#endif + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); } #ifdef CONFIG_E1000_NAPI @@ -3836,7 +3796,7 @@ irqreturn_t e1000_intr_msi(int irq, void *data) for (i = 0; i < E1000_MAX_INTR; i++) if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & - !e1000_clean_tx_irq(adapter, adapter->tx_ring))) + e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; if (likely(adapter->itr_setting & 3)) @@ -3939,7 +3899,7 @@ e1000_intr(int irq, void *data) for (i = 0; i < E1000_MAX_INTR; i++) if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & - !e1000_clean_tx_irq(adapter, adapter->tx_ring))) + e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; if (likely(adapter->itr_setting & 3)) @@ -3989,7 +3949,7 @@ e1000_clean(struct net_device *poll_dev, int *budget) poll_dev->quota -= work_done; /* If no Tx and not enough Rx work done, exit the polling mode */ - if ((!tx_cleaned && (work_done == 0)) || + if ((tx_cleaned && (work_done < work_to_do)) || !netif_running(poll_dev)) { quit_polling: if (likely(adapter->itr_setting & 3)) @@ -4019,7 +3979,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, #ifdef CONFIG_E1000_NAPI unsigned int count = 0; #endif - boolean_t cleaned = FALSE; + boolean_t cleaned = TRUE; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; @@ -4034,10 +3994,13 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, if (cleaned) { struct sk_buff *skb = buffer_info->skb; - unsigned int segs = skb_shinfo(skb)->gso_segs; + unsigned int segs, bytecount; + segs = skb_shinfo(skb)->gso_segs ?: 1; + /* multiply data chunks by size of headers */ + bytecount = ((segs - 1) * skb_headlen(skb)) + + skb->len; total_tx_packets += segs; - total_tx_packets++; - total_tx_bytes += skb->len; + total_tx_bytes += bytecount; } e1000_unmap_and_free_tx_resource(adapter, buffer_info); tx_desc->upper.data = 0; @@ -4050,7 +4013,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, #ifdef CONFIG_E1000_NAPI #define E1000_TX_WEIGHT 64 /* weight of a sort for tx, to avoid endless transmit cleanup */ - if (count++ == E1000_TX_WEIGHT) break; + if (count++ == E1000_TX_WEIGHT) { + cleaned = FALSE; + break; + } #endif } |