1 files changed, 326 insertions, 0 deletions

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 764035a8c9a..5a8669aedf6 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -121,9 +121,15 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 	enum ixgbe_phy_type phy_type;
 
 	switch (phy_id) {
+	case TN1010_PHY_ID:
+		phy_type = ixgbe_phy_tn;
+		break;
 	case QT2022_PHY_ID:
 		phy_type = ixgbe_phy_qt;
 		break;
+	case ATH_PHY_ID:
+		phy_type = ixgbe_phy_nl;
+		break;
 	default:
 		phy_type = ixgbe_phy_unknown;
 		break;
@@ -426,3 +432,323 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 	return 0;
 }
 
+/**
+ *  ixgbe_reset_phy_nl - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+	u16 phy_offset, control, eword, edata, block_crc;
+	bool end_data = false;
+	u16 list_offset, data_offset;
+	u16 phy_data = 0;
+	s32 ret_val = 0;
+	u32 i;
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+	                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+
+	/* reset the PHY and poll for completion */
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+	                      IXGBE_MDIO_PHY_XS_DEV_TYPE,
+	                      (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+
+	for (i = 0; i < 100; i++) {
+		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+		                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+		if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+			break;
+		msleep(10);
+	}
+
+	if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+		hw_dbg(hw, "PHY reset did not complete.\n");
+		ret_val = IXGBE_ERR_PHY;
+		goto out;
+	}
+
+	/* Get init offsets */
+	ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+	                                              &data_offset);
+	if (ret_val != 0)
+		goto out;
+
+	ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+	data_offset++;
+	while (!end_data) {
+		/*
+		 * Read control word from PHY init contents offset
+		 */
+		ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+		control = (eword & IXGBE_CONTROL_MASK_NL) >>
+		           IXGBE_CONTROL_SHIFT_NL;
+		edata = eword & IXGBE_DATA_MASK_NL;
+		switch (control) {
+		case IXGBE_DELAY_NL:
+			data_offset++;
+			hw_dbg(hw, "DELAY: %d MS\n", edata);
+			msleep(edata);
+			break;
+		case IXGBE_DATA_NL:
+			hw_dbg(hw, "DATA:  \n");
+			data_offset++;
+			hw->eeprom.ops.read(hw, data_offset++,
+			                    &phy_offset);
+			for (i = 0; i < edata; i++) {
+				hw->eeprom.ops.read(hw, data_offset, &eword);
+				hw->phy.ops.write_reg(hw, phy_offset,
+				                      IXGBE_TWINAX_DEV, eword);
+				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
+				       phy_offset);
+				data_offset++;
+				phy_offset++;
+			}
+			break;
+		case IXGBE_CONTROL_NL:
+			data_offset++;
+			hw_dbg(hw, "CONTROL: \n");
+			if (edata == IXGBE_CONTROL_EOL_NL) {
+				hw_dbg(hw, "EOL\n");
+				end_data = true;
+			} else if (edata == IXGBE_CONTROL_SOL_NL) {
+				hw_dbg(hw, "SOL\n");
+			} else {
+				hw_dbg(hw, "Bad control value\n");
+				ret_val = IXGBE_ERR_PHY;
+				goto out;
+			}
+			break;
+		default:
+			hw_dbg(hw, "Bad control type\n");
+			ret_val = IXGBE_ERR_PHY;
+			goto out;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
+ *                                      the PHY type.
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and indentifies the SFP module.  Assings appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 vendor_oui = 0;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[4] = {0, 0, 0, 0};
+	u8 transmission_media = 0;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+	                                     &identifier);
+
+	if (status == IXGBE_ERR_SFP_NOT_PRESENT) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		goto out;
+	}
+
+	if (identifier == IXGBE_SFF_IDENTIFIER_SFP) {
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES,
+		                            &comp_codes_1g);
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
+		                            &comp_codes_10g);
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
+		                            &transmission_media);
+
+		/* ID Module
+		 * =========
+		 * 0	SFP_DA_CU
+		 * 1	SFP_SR
+		 * 2	SFP_LR
+		 */
+		if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_sr;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_lr;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+
+		/* Determine PHY vendor */
+		if (hw->phy.type == ixgbe_phy_unknown) {
+			hw->phy.id = identifier;
+			hw->phy.ops.read_i2c_eeprom(hw,
+			                            IXGBE_SFF_VENDOR_OUI_BYTE0,
+			                            &oui_bytes[0]);
+			hw->phy.ops.read_i2c_eeprom(hw,
+			                            IXGBE_SFF_VENDOR_OUI_BYTE1,
+			                            &oui_bytes[1]);
+			hw->phy.ops.read_i2c_eeprom(hw,
+			                            IXGBE_SFF_VENDOR_OUI_BYTE2,
+			                            &oui_bytes[2]);
+
+			vendor_oui =
+			  ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+			   (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+			   (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+			switch (vendor_oui) {
+			case IXGBE_SFF_VENDOR_OUI_TYCO:
+				if (transmission_media &
+				    IXGBE_SFF_TWIN_AX_CAPABLE)
+					hw->phy.type = ixgbe_phy_tw_tyco;
+				break;
+			case IXGBE_SFF_VENDOR_OUI_FTL:
+				hw->phy.type = ixgbe_phy_sfp_ftl;
+				break;
+			case IXGBE_SFF_VENDOR_OUI_AVAGO:
+				hw->phy.type = ixgbe_phy_sfp_avago;
+				break;
+			default:
+				if (transmission_media &
+				    IXGBE_SFF_TWIN_AX_CAPABLE)
+					hw->phy.type = ixgbe_phy_tw_unknown;
+				else
+					hw->phy.type = ixgbe_phy_sfp_unknown;
+				break;
+			}
+		}
+		status = 0;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
+ *  if it supports a given SFP+ module type, if so it returns the offsets to the
+ *  phy init sequence block.
+ *  @hw: pointer to hardware structure
+ *  @list_offset: offset to the SFP ID list
+ *  @data_offset: offset to the SFP data block
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+                                        u16 *list_offset,
+                                        u16 *data_offset)
+{
+	u16 sfp_id;
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+
+	if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+	    (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	/* Read offset to PHY init contents */
+	hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
+
+	if ((!*list_offset) || (*list_offset == 0xFFFF))
+		return IXGBE_ERR_PHY;
+
+	/* Shift offset to first ID word */
+	(*list_offset)++;
+
+	/*
+	 * Find the matching SFP ID in the EEPROM
+	 * and program the init sequence
+	 */
+	hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
+
+	while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+		if (sfp_id == hw->phy.sfp_type) {
+			(*list_offset)++;
+			hw->eeprom.ops.read(hw, *list_offset, data_offset);
+			if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+				hw_dbg(hw, "SFP+ module not supported\n");
+				return IXGBE_ERR_SFP_NOT_SUPPORTED;
+			} else {
+				break;
+			}
+		} else {
+			(*list_offset) += 2;
+			if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+				return IXGBE_ERR_PHY;
+		}
+	}
+
+	if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+		hw_dbg(hw, "No matching SFP+ module found\n");
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_check_phy_link_tnx - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+                             bool *link_up)
+{
+	s32 status = 0;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 phy_link = 0;
+	u16 phy_speed = 0;
+	u16 phy_data = 0;
+
+	/* Initialize speed and link to default case */
+	*link_up = false;
+	*speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		udelay(10);
+		status = hw->phy.ops.read_reg(hw,
+		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+		                        &phy_data);
+		phy_link = phy_data &
+		           IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+		phy_speed = phy_data &
+		            IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+		if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+			*link_up = true;
+			if (phy_speed ==
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+				*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+                                       u16 *firmware_version)
+{
+	s32 status = 0;
+
+	status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+	                              IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+	                              firmware_version);
+
+	return status;
+}
+