diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 114 |
1 files changed, 79 insertions, 35 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8f01952c485..a8b74cdab1e 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -74,11 +74,13 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) } EXPORT_SYMBOL(phy_device_create); -/* get_phy_device +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus * - * description: Reads the ID registers of the PHY at addr on the - * bus, then allocates and returns the phy_device to - * represent it. + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. */ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) { @@ -112,23 +114,33 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) return dev; } -/* phy_prepare_link: +/** + * phy_prepare_link - prepares the PHY layer to monitor link status + * @phydev: target phy_device struct + * @handler: callback function for link status change notifications * - * description: Tells the PHY infrastructure to handle the + * Description: Tells the PHY infrastructure to handle the * gory details on monitoring link status (whether through * polling or an interrupt), and to call back to the * connected device driver when the link status changes. * If you want to monitor your own link state, don't call - * this function */ + * this function. + */ void phy_prepare_link(struct phy_device *phydev, void (*handler)(struct net_device *)) { phydev->adjust_link = handler; } -/* phy_connect: +/** + * phy_connect - connect an ethernet device to a PHY device + * @dev: the network device to connect + * @phy_id: the PHY device to connect + * @handler: callback function for state change notifications + * @flags: PHY device's dev_flags + * @interface: PHY device's interface * - * description: Convenience function for connecting ethernet + * Description: Convenience function for connecting ethernet * devices to PHY devices. The default behavior is for * the PHY infrastructure to handle everything, and only notify * the connected driver when the link status changes. If you @@ -158,6 +170,10 @@ struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, } EXPORT_SYMBOL(phy_connect); +/** + * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device + * @phydev: target phy_device struct + */ void phy_disconnect(struct phy_device *phydev) { if (phydev->irq > 0) @@ -171,21 +187,25 @@ void phy_disconnect(struct phy_device *phydev) } EXPORT_SYMBOL(phy_disconnect); -/* phy_attach: +static int phy_compare_id(struct device *dev, void *data) +{ + return strcmp((char *)data, dev->bus_id) ? 0 : 1; +} + +/** + * phy_attach - attach a network device to a particular PHY device + * @dev: network device to attach + * @phy_id: PHY device to attach + * @flags: PHY device's dev_flags + * @interface: PHY device's interface * - * description: Called by drivers to attach to a particular PHY + * Description: Called by drivers to attach to a particular PHY * device. The phy_device is found, and properly hooked up * to the phy_driver. If no driver is attached, then the * genphy_driver is used. The phy_device is given a ptr to * the attaching device, and given a callback for link status - * change. The phy_device is returned to the attaching - * driver. + * change. The phy_device is returned to the attaching driver. */ -static int phy_compare_id(struct device *dev, void *data) -{ - return strcmp((char *)data, dev->bus_id) ? 0 : 1; -} - struct phy_device *phy_attach(struct net_device *dev, const char *phy_id, u32 flags, phy_interface_t interface) { @@ -246,6 +266,10 @@ struct phy_device *phy_attach(struct net_device *dev, } EXPORT_SYMBOL(phy_attach); +/** + * phy_detach - detach a PHY device from its network device + * @phydev: target phy_device struct + */ void phy_detach(struct phy_device *phydev) { phydev->attached_dev = NULL; @@ -262,11 +286,13 @@ EXPORT_SYMBOL(phy_detach); /* Generic PHY support and helper functions */ -/* genphy_config_advert +/** + * genphy_config_advert - sanitize and advertise auto-negotation parameters + * @phydev: target phy_device struct * - * description: Writes MII_ADVERTISE with the appropriate values, + * Description: Writes MII_ADVERTISE with the appropriate values, * after sanitizing the values to make sure we only advertise - * what is supported + * what is supported. */ int genphy_config_advert(struct phy_device *phydev) { @@ -328,11 +354,14 @@ int genphy_config_advert(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_config_advert); -/* genphy_setup_forced +/** + * genphy_setup_forced - configures/forces speed/duplex from @phydev + * @phydev: target phy_device struct * - * description: Configures MII_BMCR to force speed/duplex + * Description: Configures MII_BMCR to force speed/duplex * to the values in phydev. Assumes that the values are valid. - * Please see phy_sanitize_settings() */ + * Please see phy_sanitize_settings(). + */ int genphy_setup_forced(struct phy_device *phydev) { int ctl = BMCR_RESET; @@ -361,7 +390,10 @@ int genphy_setup_forced(struct phy_device *phydev) } -/* Enable and Restart Autonegotiation */ +/** + * genphy_restart_aneg - Enable and Restart Autonegotiation + * @phydev: target phy_device struct + */ int genphy_restart_aneg(struct phy_device *phydev) { int ctl; @@ -382,11 +414,13 @@ int genphy_restart_aneg(struct phy_device *phydev) } -/* genphy_config_aneg +/** + * genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct * - * description: If auto-negotiation is enabled, we configure the + * Description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not - * enabled, then we write the BMCR + * enabled, then we write the BMCR. */ int genphy_config_aneg(struct phy_device *phydev) { @@ -406,11 +440,13 @@ int genphy_config_aneg(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_config_aneg); -/* genphy_update_link +/** + * genphy_update_link - update link status in @phydev + * @phydev: target phy_device struct * - * description: Update the value in phydev->link to reflect the + * Description: Update the value in phydev->link to reflect the * current link value. In order to do this, we need to read - * the status register twice, keeping the second value + * the status register twice, keeping the second value. */ int genphy_update_link(struct phy_device *phydev) { @@ -437,9 +473,11 @@ int genphy_update_link(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_update_link); -/* genphy_read_status +/** + * genphy_read_status - check the link status and update current link state + * @phydev: target phy_device struct * - * description: Check the link, then figure out the current state + * Description: Check the link, then figure out the current state * by comparing what we advertise with what the link partner * advertises. Start by checking the gigabit possibilities, * then move on to 10/100. @@ -579,9 +617,11 @@ static int genphy_config_init(struct phy_device *phydev) } -/* phy_probe +/** + * phy_probe - probe and init a PHY device + * @dev: device to probe and init * - * description: Take care of setting up the phy_device structure, + * Description: Take care of setting up the phy_device structure, * set the state to READY (the driver's init function should * set it to STARTING if needed). */ @@ -643,6 +683,10 @@ static int phy_remove(struct device *dev) return 0; } +/** + * phy_driver_register - register a phy_driver with the PHY layer + * @new_driver: new phy_driver to register + */ int phy_driver_register(struct phy_driver *new_driver) { int retval; |