aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/qla3xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/qla3xxx.c')
-rw-r--r--[-rwxr-xr-x]drivers/net/qla3xxx.c191
1 files changed, 87 insertions, 104 deletions
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index ea151315050..30adf726743 100755..100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -31,7 +31,6 @@
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/if_vlan.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
@@ -82,7 +81,7 @@ typedef enum {
} PHY_DEVICE_et;
typedef struct {
- PHY_DEVICE_et phyDevice;
+ PHY_DEVICE_et phyDevice;
u32 phyIdOUI;
u16 phyIdModel;
char *name;
@@ -331,7 +330,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
PCI_DMA_FROMDEVICE);
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
dev_kfree_skb(lrg_buf_cb->skb);
lrg_buf_cb->skb = NULL;
@@ -885,14 +884,14 @@ static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev)
u16 reg;
/* Enable Auto-negotiation sense */
- ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
+ ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
PHYAddr[qdev->mac_index]);
reg |= PETBI_TBI_AUTO_SENSE;
- ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
+ ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
PHYAddr[qdev->mac_index]);
ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
- PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
+ PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
PHYAddr[qdev->mac_index]);
ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
@@ -946,7 +945,7 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr);
/* Write new PHYAD w/bit 5 set */
ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr);
- /*
+ /*
* Disable diagnostic mode bit 2 = 0
* Power up device bit 11 = 0
* Link up (on) and activity (blink)
@@ -956,18 +955,18 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
ql_mii_write_reg(qdev, 0x1c, 0xfaf0);
}
-static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
+static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
u16 phyIdReg0, u16 phyIdReg1)
{
PHY_DEVICE_et result = PHY_TYPE_UNKNOWN;
- u32 oui;
+ u32 oui;
u16 model;
- int i;
+ int i;
if (phyIdReg0 == 0xffff) {
return result;
}
-
+
if (phyIdReg1 == 0xffff) {
return result;
}
@@ -985,7 +984,7 @@ static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
printk(KERN_INFO "%s: Phy: %s\n",
qdev->ndev->name, PHY_DEVICES[i].name);
-
+
break;
}
}
@@ -1034,7 +1033,7 @@ static int ql_is_full_dup(struct ql3_adapter *qdev)
{
if (ql_mii_read_reg(qdev, 0x1A, &reg))
return 0;
-
+
return ((reg & 0x0080) && (reg & 0x1000)) != 0;
}
case PHY_VITESSE_VSC8211:
@@ -1083,19 +1082,19 @@ static int PHY_Setup(struct ql3_adapter *qdev)
/* Check if we have a Agere PHY */
if ((reg1 == 0xffff) || (reg2 == 0xffff)) {
- /* Determine which MII address we should be using
+ /* Determine which MII address we should be using
determined by the index of the card */
if (qdev->mac_index == 0) {
miiAddr = MII_AGERE_ADDR_1;
} else {
miiAddr = MII_AGERE_ADDR_2;
}
-
+
err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, &reg1, miiAddr);
if(err != 0) {
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
qdev->ndev->name);
- return err;
+ return err;
}
err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, &reg2, miiAddr);
@@ -1104,9 +1103,9 @@ static int PHY_Setup(struct ql3_adapter *qdev)
qdev->ndev->name);
return err;
}
-
+
/* We need to remember to initialize the Agere PHY */
- agereAddrChangeNeeded = true;
+ agereAddrChangeNeeded = true;
}
/* Determine the particular PHY we have on board to apply
@@ -1115,7 +1114,7 @@ static int PHY_Setup(struct ql3_adapter *qdev)
if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) {
/* need this here so address gets changed */
- phyAgereSpecificInit(qdev, miiAddr);
+ phyAgereSpecificInit(qdev, miiAddr);
} else if (qdev->phyType == PHY_TYPE_UNKNOWN) {
printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name);
return -EIO;
@@ -1428,7 +1427,7 @@ static int ql_this_adapter_controls_port(struct ql3_adapter *qdev)
static void ql_phy_reset_ex(struct ql3_adapter *qdev)
{
- ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
+ ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
PHYAddr[qdev->mac_index]);
}
@@ -1439,7 +1438,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(qdev->phyType == PHY_AGERE_ET1011C) {
/* turn off external loopback */
- ql_mii_write_reg(qdev, 0x13, 0x0000);
+ ql_mii_write_reg(qdev, 0x13, 0x0000);
}
if(qdev->mac_index == 0)
@@ -1453,23 +1452,23 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
portConfiguration = PORT_CONFIG_DEFAULT;
/* Set the 1000 advertisements */
- ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
+ ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
PHYAddr[qdev->mac_index]);
reg &= ~PHY_GIG_ALL_PARAMS;
- if(portConfiguration &
+ if(portConfiguration &
PORT_CONFIG_FULL_DUPLEX_ENABLED &
PORT_CONFIG_1000MB_SPEED) {
reg |= PHY_GIG_ADV_1000F;
}
-
- if(portConfiguration &
+
+ if(portConfiguration &
PORT_CONFIG_HALF_DUPLEX_ENABLED &
PORT_CONFIG_1000MB_SPEED) {
reg |= PHY_GIG_ADV_1000H;
}
- ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
+ ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
PHYAddr[qdev->mac_index]);
/* Set the 10/100 & pause negotiation advertisements */
@@ -1483,7 +1482,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) {
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
reg |= PHY_NEG_ADV_100F;
-
+
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
reg |= PHY_NEG_ADV_10F;
}
@@ -1491,22 +1490,22 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) {
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
reg |= PHY_NEG_ADV_100H;
-
+
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
reg |= PHY_NEG_ADV_10H;
}
if(portConfiguration &
PORT_CONFIG_1000MB_SPEED) {
- reg |= 1;
+ reg |= 1;
}
- ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
+ ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
PHYAddr[qdev->mac_index]);
ql_mii_read_reg_ex(qdev, CONTROL_REG, &reg, PHYAddr[qdev->mac_index]);
-
- ql_mii_write_reg_ex(qdev, CONTROL_REG,
+
+ ql_mii_write_reg_ex(qdev, CONTROL_REG,
reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG,
PHYAddr[qdev->mac_index]);
}
@@ -1661,7 +1660,7 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
"%s: Reset in progress, skip processing link "
"state.\n", qdev->ndev->name);
- spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+ spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
return;
}
@@ -1753,7 +1752,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
return -1;
if (qdev->device_id == QL3032_DEVICE_ID)
- ql_write_page0_reg(qdev,
+ ql_write_page0_reg(qdev,
&port_regs->macMIIMgmtControlReg, 0x0f00000);
/* Divide 125MHz clock by 28 to meet PHY timing requirements */
@@ -1866,8 +1865,6 @@ static void ql_get_drvinfo(struct net_device *ndev,
strncpy(drvinfo->version, ql3xxx_driver_version, 32);
strncpy(drvinfo->fw_version, "N/A", 32);
strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
- drvinfo->n_stats = 0;
- drvinfo->testinfo_len = 0;
drvinfo->regdump_len = 0;
drvinfo->eedump_len = 0;
}
@@ -1939,7 +1936,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
dev_kfree_skb(lrg_buf_cb->skb);
lrg_buf_cb->skb = NULL;
@@ -2047,14 +2044,14 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
printk(KERN_WARNING "Frame short but, frame was padded and sent.\n");
}
-
+
tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
/* Check the transmit response flags for any errors */
if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
printk(KERN_ERR "Frame too short to be legal, frame not sent.\n");
- qdev->stats.tx_errors++;
+ qdev->ndev->stats.tx_errors++;
retval = -EIO;
goto frame_not_sent;
}
@@ -2062,7 +2059,7 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
if(tx_cb->seg_count == 0) {
printk(KERN_ERR "tx_cb->seg_count == 0: %d\n", mac_rsp->transaction_id);
- qdev->stats.tx_errors++;
+ qdev->ndev->stats.tx_errors++;
retval = -EIO;
goto invalid_seg_count;
}
@@ -2081,8 +2078,8 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
PCI_DMA_TODEVICE);
}
}
- qdev->stats.tx_packets++;
- qdev->stats.tx_bytes += tx_cb->skb->len;
+ qdev->ndev->stats.tx_packets++;
+ qdev->ndev->stats.tx_bytes += tx_cb->skb->len;
frame_not_sent:
dev_kfree_skb_irq(tx_cb->skb);
@@ -2111,13 +2108,13 @@ static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev)
/*
* The difference between 3022 and 3032 for inbound completions:
- * 3022 uses two buffers per completion. The first buffer contains
- * (some) header info, the second the remainder of the headers plus
- * the data. For this chip we reserve some space at the top of the
- * receive buffer so that the header info in buffer one can be
- * prepended to the buffer two. Buffer two is the sent up while
+ * 3022 uses two buffers per completion. The first buffer contains
+ * (some) header info, the second the remainder of the headers plus
+ * the data. For this chip we reserve some space at the top of the
+ * receive buffer so that the header info in buffer one can be
+ * prepended to the buffer two. Buffer two is the sent up while
* buffer one is returned to the hardware to be reused.
- * 3032 receives all of it's data and headers in one buffer for a
+ * 3032 receives all of it's data and headers in one buffer for a
* simpler process. 3032 also supports checksum verification as
* can be seen in ql_process_macip_rx_intr().
*/
@@ -2141,8 +2138,8 @@ static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
lrg_buf_cb2 = ql_get_lbuf(qdev);
skb = lrg_buf_cb2->skb;
- qdev->stats.rx_packets++;
- qdev->stats.rx_bytes += length;
+ qdev->ndev->stats.rx_packets++;
+ qdev->ndev->stats.rx_bytes += length;
skb_put(skb, length);
pci_unmap_single(qdev->pdev,
@@ -2208,13 +2205,13 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
skb_push(skb2, size), size);
} else {
u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
- if (checksum &
- (IB_IP_IOCB_RSP_3032_ICE |
- IB_IP_IOCB_RSP_3032_CE)) {
+ if (checksum &
+ (IB_IP_IOCB_RSP_3032_ICE |
+ IB_IP_IOCB_RSP_3032_CE)) {
printk(KERN_ERR
"%s: Bad checksum for this %s packet, checksum = %x.\n",
__func__,
- ((checksum &
+ ((checksum &
IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
"UDP"),checksum);
} else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
@@ -2226,8 +2223,8 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
skb2->protocol = eth_type_trans(skb2, qdev->ndev);
netif_receive_skb(skb2);
- qdev->stats.rx_packets++;
- qdev->stats.rx_bytes += length;
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += length;
ndev->last_rx = jiffies;
lrg_buf_cb2->skb = NULL;
@@ -2310,10 +2307,10 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev,
return work_done;
}
-static int ql_poll(struct net_device *ndev, int *budget)
+static int ql_poll(struct napi_struct *napi, int budget)
{
- struct ql3_adapter *qdev = netdev_priv(ndev);
- int work_to_do = min(*budget, ndev->quota);
+ struct ql3_adapter *qdev = container_of(napi, struct ql3_adapter, napi);
+ struct net_device *ndev = qdev->ndev;
int rx_cleaned = 0, tx_cleaned = 0;
unsigned long hw_flags;
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
@@ -2321,16 +2318,13 @@ static int ql_poll(struct net_device *ndev, int *budget)
if (!netif_carrier_ok(ndev))
goto quit_polling;
- ql_tx_rx_clean(qdev, &tx_cleaned, &rx_cleaned, work_to_do);
- *budget -= rx_cleaned;
- ndev->quota -= rx_cleaned;
+ ql_tx_rx_clean(qdev, &tx_cleaned, &rx_cleaned, budget);
- if( tx_cleaned + rx_cleaned != work_to_do ||
+ if (tx_cleaned + rx_cleaned != budget ||
!netif_running(ndev)) {
quit_polling:
- netif_rx_complete(ndev);
-
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+ __netif_rx_complete(ndev, napi);
ql_update_small_bufq_prod_index(qdev);
ql_update_lrg_bufq_prod_index(qdev);
writel(qdev->rsp_consumer_index,
@@ -2338,9 +2332,8 @@ quit_polling:
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
ql_enable_interrupts(qdev);
- return 0;
}
- return 1;
+ return tx_cleaned + rx_cleaned;
}
static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
@@ -2390,8 +2383,8 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
spin_unlock(&qdev->adapter_lock);
} else if (value & ISP_IMR_DISABLE_CMPL_INT) {
ql_disable_interrupts(qdev);
- if (likely(netif_rx_schedule_prep(ndev))) {
- __netif_rx_schedule(ndev);
+ if (likely(netif_rx_schedule_prep(ndev, &qdev->napi))) {
+ __netif_rx_schedule(ndev, &qdev->napi);
}
} else {
return IRQ_NONE;
@@ -2401,12 +2394,12 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
}
/*
- * Get the total number of segments needed for the
+ * Get the total number of segments needed for the
* given number of fragments. This is necessary because
* outbound address lists (OAL) will be used when more than
- * two frags are given. Each address list has 5 addr/len
+ * two frags are given. Each address list has 5 addr/len
* pairs. The 5th pair in each AOL is used to point to
- * the next AOL if more frags are coming.
+ * the next AOL if more frags are coming.
* That is why the frags:segment count ratio is not linear.
*/
static int ql_get_seg_count(struct ql3_adapter *qdev,
@@ -2483,12 +2476,12 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
return NETDEV_TX_BUSY;
}
-
+
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
@@ -2518,7 +2511,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
qdev->ndev->name, err);
goto map_error;
}
@@ -2544,7 +2537,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
qdev->ndev->name, err);
goto map_error;
}
@@ -2565,10 +2558,10 @@ static int ql_send_map(struct ql3_adapter *qdev,
map_error:
/* A PCI mapping failed and now we will need to back out
- * We need to traverse through the oal's and associated pages which
+ * We need to traverse through the oal's and associated pages which
* have been mapped and now we must unmap them to clean up properly
*/
-
+
seg = 1;
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
oal = tx_cb->oal;
@@ -2606,11 +2599,11 @@ map_error:
* The difference between 3022 and 3032 sends:
* 3022 only supports a simple single segment transmission.
* 3032 supports checksumming and scatter/gather lists (fragments).
- * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
- * in the IOCB plus a chain of outbound address lists (OAL) that
- * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
- * will used to point to an OAL when more ALP entries are required.
- * The IOCB is always the top of the chain followed by one or more
+ * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
+ * in the IOCB plus a chain of outbound address lists (OAL) that
+ * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
+ * will used to point to an OAL when more ALP entries are required.
+ * The IOCB is always the top of the chain followed by one or more
* OALs (when necessary).
*/
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
@@ -2624,14 +2617,14 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
return NETDEV_TX_BUSY;
}
-
+
tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
if((tx_cb->seg_count = ql_get_seg_count(qdev,
(skb_shinfo(skb)->nr_frags))) == -1) {
printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
return NETDEV_TX_OK;
}
-
+
mac_iocb_ptr = tx_cb->queue_entry;
memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
@@ -2643,12 +2636,12 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
if (qdev->device_id == QL3032_DEVICE_ID &&
skb->ip_summed == CHECKSUM_PARTIAL)
ql_hw_csum_setup(skb, mac_iocb_ptr);
-
+
if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
return NETDEV_TX_BUSY;
}
-
+
wmb();
qdev->req_producer_index++;
if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
@@ -2746,7 +2739,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
"%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name);
return -ENOMEM;
}
-
+
qdev->lrg_buf_q_alloc_virt_addr =
pci_alloc_consistent(qdev->pdev,
qdev->lrg_buf_q_alloc_size,
@@ -3562,6 +3555,7 @@ static void ql_display_dev_info(struct net_device *ndev)
{
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
struct pci_dev *pdev = qdev->pdev;
+ DECLARE_MAC_BUF(mac);
printk(KERN_INFO PFX
"\n%s Adapter %d RevisionID %d found %s on PCI slot %d.\n",
@@ -3587,10 +3581,8 @@ static void ql_display_dev_info(struct net_device *ndev)
if (netif_msg_probe(qdev))
printk(KERN_INFO PFX
- "%s: MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
- ndev->name, ndev->dev_addr[0], ndev->dev_addr[1],
- ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4],
- ndev->dev_addr[5]);
+ "%s: MAC address %s\n",
+ ndev->name, print_mac(mac, ndev->dev_addr));
}
static int ql_adapter_down(struct ql3_adapter *qdev, int do_reset)
@@ -3617,7 +3609,7 @@ static int ql_adapter_down(struct ql3_adapter *qdev, int do_reset)
del_timer_sync(&qdev->adapter_timer);
- netif_poll_disable(ndev);
+ napi_disable(&qdev->napi);
if (do_reset) {
int soft_reset;
@@ -3705,7 +3697,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
- netif_poll_enable(ndev);
+ napi_enable(&qdev->napi);
ql_enable_interrupts(qdev);
return 0;
@@ -3758,12 +3750,6 @@ static int ql3xxx_open(struct net_device *ndev)
return (ql_adapter_up(qdev));
}
-static struct net_device_stats *ql3xxx_get_stats(struct net_device *dev)
-{
- struct ql3_adapter *qdev = (struct ql3_adapter *)dev->priv;
- return &qdev->stats;
-}
-
static void ql3xxx_set_multicast_list(struct net_device *ndev)
{
/*
@@ -4016,7 +4002,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
goto err_out_free_regions;
}
- SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
pci_set_drvdata(pdev, ndev);
@@ -4054,15 +4039,13 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
ndev->open = ql3xxx_open;
ndev->hard_start_xmit = ql3xxx_send;
ndev->stop = ql3xxx_close;
- ndev->get_stats = ql3xxx_get_stats;
ndev->set_multicast_list = ql3xxx_set_multicast_list;
SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
ndev->set_mac_address = ql3xxx_set_mac_address;
ndev->tx_timeout = ql3xxx_tx_timeout;
ndev->watchdog_timeo = 5 * HZ;
- ndev->poll = &ql_poll;
- ndev->weight = 64;
+ netif_napi_add(ndev, &qdev->napi, ql_poll, 64);
ndev->irq = pdev->irq;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 09:12:17 +0000