diff options
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 2210 |
1 files changed, 2210 insertions, 0 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c new file mode 100644 index 00000000000..9542995ba66 --- /dev/null +++ b/drivers/net/stmmac/stmmac_main.c @@ -0,0 +1,2210 @@ +/******************************************************************************* + This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers. + ST Ethernet IPs are built around a Synopsys IP Core. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + + Documentation available at: + http://www.stlinux.com + Support available at: + https://bugzilla.stlinux.com/ +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/if_ether.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/if_vlan.h> +#include <linux/dma-mapping.h> +#include <linux/stm/soc.h> +#include "stmmac.h" + +#define STMMAC_RESOURCE_NAME "stmmaceth" +#define PHY_RESOURCE_NAME "stmmacphy" + +#undef STMMAC_DEBUG +/*#define STMMAC_DEBUG*/ +#ifdef STMMAC_DEBUG +#define DBG(nlevel, klevel, fmt, args...) \ + ((void)(netif_msg_##nlevel(priv) && \ + printk(KERN_##klevel fmt, ## args))) +#else +#define DBG(nlevel, klevel, fmt, args...) do { } while (0) +#endif + +#undef STMMAC_RX_DEBUG +/*#define STMMAC_RX_DEBUG*/ +#ifdef STMMAC_RX_DEBUG +#define RX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define RX_DBG(fmt, args...) do { } while (0) +#endif + +#undef STMMAC_XMIT_DEBUG +/*#define STMMAC_XMIT_DEBUG*/ +#ifdef STMMAC_TX_DEBUG +#define TX_DBG(fmt, args...) printk(fmt, ## args) +#else +#define TX_DBG(fmt, args...) do { } while (0) +#endif + +#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 /* default 5 seconds */ +static int watchdog = TX_TIMEO; +module_param(watchdog, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds"); + +static int debug = -1; /* -1: default, 0: no output, 16: all */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)"); + +static int phyaddr = -1; +module_param(phyaddr, int, S_IRUGO); +MODULE_PARM_DESC(phyaddr, "Physical device address"); + +#define DMA_TX_SIZE 256 +static int dma_txsize = DMA_TX_SIZE; +module_param(dma_txsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list"); + +#define DMA_RX_SIZE 256 +static int dma_rxsize = DMA_RX_SIZE; +module_param(dma_rxsize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list"); + +static int flow_ctrl = FLOW_OFF; +module_param(flow_ctrl, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]"); + +static int pause = PAUSE_TIME; +module_param(pause, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pause, "Flow Control Pause Time"); + +#define TC_DEFAULT 64 +static int tc = TC_DEFAULT; +module_param(tc, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tc, "DMA threshold control value"); + +#define RX_NO_COALESCE 1 /* Always interrupt on completion */ +#define TX_NO_COALESCE -1 /* No moderation by default */ + +/* Pay attention to tune this parameter; take care of both + * hardware capability and network stabitily/performance impact. + * Many tests showed that ~4ms latency seems to be good enough. */ +#ifdef CONFIG_STMMAC_TIMER +#define DEFAULT_PERIODIC_RATE 256 +static int tmrate = DEFAULT_PERIODIC_RATE; +module_param(tmrate, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); +#endif + +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +static int buf_sz = DMA_BUFFER_SIZE; +module_param(buf_sz, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(buf_sz, "DMA buffer size"); + +/* In case of Giga ETH, we can enable/disable the COE for the + * transmit HW checksum computation. + * Note that, if tx csum is off in HW, SG will be still supported. */ +static int tx_coe = HW_CSUM; +module_param(tx_coe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); + +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id); +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev); + +/** + * stmmac_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void stmmac_verify_args(void) +{ + if (unlikely(watchdog < 0)) + watchdog = TX_TIMEO; + if (unlikely(dma_rxsize < 0)) + dma_rxsize = DMA_RX_SIZE; + if (unlikely(dma_txsize < 0)) + dma_txsize = DMA_TX_SIZE; + if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB))) + buf_sz = DMA_BUFFER_SIZE; + if (unlikely(flow_ctrl > 1)) + flow_ctrl = FLOW_AUTO; + else if (likely(flow_ctrl < 0)) + flow_ctrl = FLOW_OFF; + if (unlikely((pause < 0) || (pause > 0xffff))) + pause = PAUSE_TIME; + + return; +} + +#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) +static void print_pkt(unsigned char *buf, int len) +{ + int j; + pr_info("len = %d byte, buf addr: 0x%p", len, buf); + for (j = 0; j < len; j++) { + if ((j % 16) == 0) + pr_info("\n %03x:", j); + pr_info(" %02x", buf[j]); + } + pr_info("\n"); + return; +} +#endif + +/* minimum number of free TX descriptors required to wake up TX process */ +#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) +{ + return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1; +} + +/** + * stmmac_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void stmmac_adjust_link(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + int new_state = 0; + unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; + + if (phydev == NULL) + return; + + DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n", + phydev->addr, phydev->link); + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 ctrl = readl(ioaddr + MAC_CTRL_REG); + + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) + ctrl &= ~priv->mac_type->hw.link.duplex; + else + ctrl |= priv->mac_type->hw.link.duplex; + priv->oldduplex = phydev->duplex; + } + /* Flow Control operation */ + if (phydev->pause) + priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex, + fc, pause_time); + + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case 1000: + if (likely(priv->is_gmac)) + ctrl &= ~priv->mac_type->hw.link.port; + break; + case 100: + case 10: + if (priv->is_gmac) { + ctrl |= priv->mac_type->hw.link.port; + if (phydev->speed == SPEED_100) { + ctrl |= + priv->mac_type->hw.link. + speed; + } else { + ctrl &= + ~(priv->mac_type->hw. + link.speed); + } + } else { + ctrl &= ~priv->mac_type->hw.link.port; + } + priv->fix_mac_speed(priv->bsp_priv, + phydev->speed); + break; + default: + if (netif_msg_link(priv)) + pr_warning("%s: Speed (%d) is not 10" + " or 100!\n", dev->name, phydev->speed); + break; + } + + priv->speed = phydev->speed; + } + + writel(ctrl, ioaddr + MAC_CTRL_REG); + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + } + + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); + + DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n"); +} + +/** + * stmmac_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int stmmac_init_phy(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + char phy_id[BUS_ID_SIZE]; /* PHY to connect */ + char bus_id[BUS_ID_SIZE]; + + priv->oldlink = 0; + priv->speed = 0; + priv->oldduplex = -1; + + if (priv->phy_addr == -1) { + /* We don't have a PHY, so do nothing */ + return 0; + } + + snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); + + phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, + priv->phy_interface); + + if (IS_ERR(phydev)) { + pr_err("%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* + * Broken HW is sometimes missing the pull-up resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" + " Link = %d\n", dev->name, phydev->phy_id, phydev->link); + + priv->phydev = phydev; + + return 0; +} + +static inline void stmmac_mac_enable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_RNABLE_RX; + /* Set the RE (receive enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_enable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value |= MAC_ENABLE_TX; + /* Set the TE (transmit enable bit into the MAC CTRL register). */ + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_RNABLE_RX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +static inline void stmmac_mac_disable_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + MAC_CTRL_REG); + value &= ~MAC_ENABLE_TX; + writel(value, ioaddr + MAC_CTRL_REG); +} + +/** + * display_ring + * @p: pointer to the ring. + * @size: size of the ring. + * Description: display all the descriptors within the ring. + */ +static void display_ring(struct dma_desc *p, int size) +{ + struct tmp_s { + u64 a; + unsigned int b; + unsigned int c; + }; + int i; + for (i = 0; i < size; i++) { + struct tmp_s *x = (struct tmp_s *)(p + i); + pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x", + i, (unsigned int)virt_to_phys(&p[i]), + (unsigned int)(x->a), (unsigned int)((x->a) >> 32), + x->b, x->c); + pr_info("\n"); + } +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. + */ +static void init_dma_desc_rings(struct net_device *dev) +{ + int i; + struct stmmac_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + unsigned int bfsize = priv->dma_buf_sz; + int buff2_needed = 0, dis_ic = 0; + + /* Set the Buffer size according to the MTU; + * indeed, in case of jumbo we need to bump-up the buffer sizes. + */ + if (unlikely(dev->mtu >= BUF_SIZE_8KiB)) + bfsize = BUF_SIZE_16KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_4KiB)) + bfsize = BUF_SIZE_8KiB; + else if (unlikely(dev->mtu >= BUF_SIZE_2KiB)) + bfsize = BUF_SIZE_4KiB; + else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE)) + bfsize = BUF_SIZE_2KiB; + else + bfsize = DMA_BUFFER_SIZE; + +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif + /* If the MTU exceeds 8k so use the second buffer in the chain */ + if (bfsize >= BUF_SIZE_8KiB) + buff2_needed = 1; + + DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", + txsize, rxsize, bfsize); + + priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL); + priv->rx_skbuff = + kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL); + priv->dma_rx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + rxsize * + sizeof(struct dma_desc), + &priv->dma_rx_phy, + GFP_KERNEL); + priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize, + GFP_KERNEL); + priv->dma_tx = + (struct dma_desc *)dma_alloc_coherent(priv->device, + txsize * + sizeof(struct dma_desc), + &priv->dma_tx_phy, + GFP_KERNEL); + + if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) { + pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__); + return; + } + + DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, " + "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n", + dev->name, priv->dma_rx, priv->dma_tx, + (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy); + + /* RX INITIALIZATION */ + DBG(probe, INFO, "stmmac: SKB addresses:\n" + "skb\t\tskb data\tdma data\n"); + + for (i = 0; i < rxsize; i++) { + struct dma_desc *p = priv->dma_rx + i; + + skb = netdev_alloc_skb_ip_align(dev, bfsize); + if (unlikely(skb == NULL)) { + pr_err("%s: Rx init fails; skb is NULL\n", __func__); + break; + } + priv->rx_skbuff[i] = skb; + priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + bfsize, DMA_FROM_DEVICE); + + p->des2 = priv->rx_skbuff_dma[i]; + if (unlikely(buff2_needed)) + p->des3 = p->des2 + BUF_SIZE_8KiB; + DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], + priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]); + } + priv->cur_rx = 0; + priv->dirty_rx = (unsigned int)(i - rxsize); + priv->dma_buf_sz = bfsize; + buf_sz = bfsize; + + /* TX INITIALIZATION */ + for (i = 0; i < txsize; i++) { + priv->tx_skbuff[i] = NULL; + priv->dma_tx[i].des2 = 0; + } + priv->dirty_tx = 0; + priv->cur_tx = 0; + + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize); + + if (netif_msg_hw(priv)) { + pr_info("RX descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + pr_info("TX descriptor ring:\n"); + display_ring(priv->dma_tx, txsize); + } + return; +} + +static void dma_free_rx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_rx_size; i++) { + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; + } + return; +} + +static void dma_free_tx_skbufs(struct stmmac_priv *priv) +{ + int i; + + for (i = 0; i < priv->dma_tx_size; i++) { + if (priv->tx_skbuff[i] != NULL) { + struct dma_desc *p = priv->dma_tx + i; + if (p->des2) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + dev_kfree_skb_any(priv->tx_skbuff[i]); + priv->tx_skbuff[i] = NULL; + } + } + return; +} + +static void free_dma_desc_resources(struct stmmac_priv *priv) +{ + /* Release the DMA TX/RX socket buffers */ + dma_free_rx_skbufs(priv); + dma_free_tx_skbufs(priv); + + /* Free the region of consistent memory previously allocated for + * the DMA */ + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + kfree(priv->rx_skbuff_dma); + kfree(priv->rx_skbuff); + kfree(priv->tx_skbuff); + + return; +} + +/** + * stmmac_dma_start_tx + * @ioaddr: device I/O address + * Description: this function starts the DMA tx process. + */ +static void stmmac_dma_start_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +static void stmmac_dma_stop_tx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_ST; + writel(value, ioaddr + DMA_CONTROL); + return; +} + +/** + * stmmac_dma_start_rx + * @ioaddr: device I/O address + * Description: this function starts the DMA rx process. + */ +static void stmmac_dma_start_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value |= DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +static void stmmac_dma_stop_rx(unsigned long ioaddr) +{ + u32 value = readl(ioaddr + DMA_CONTROL); + value &= ~DMA_CONTROL_SR; + writel(value, ioaddr + DMA_CONTROL); + + return; +} + +/** + * stmmac_dma_operation_mode - HW DMA operation mode + * @priv : pointer to the private device structure. + * Description: it sets the DMA operation mode: tx/rx DMA thresholds + * or Store-And-Forward capability. It also verifies the COE for the + * transmission in case of Giga ETH. + */ +static void stmmac_dma_operation_mode(struct stmmac_priv *priv) +{ + if (!priv->is_gmac) { + /* MAC 10/100 */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0); + priv->tx_coe = NO_HW_CSUM; + } else { + if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { + priv->mac_type->ops->dma_mode(priv->dev->base_addr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + priv->tx_coe = HW_CSUM; + } else { + /* Checksum computation is performed in software. */ + priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, + SF_DMA_MODE); + priv->tx_coe = NO_HW_CSUM; + } + } + tx_coe = priv->tx_coe; + + return; +} + +#ifdef STMMAC_DEBUG +/** + * show_tx_process_state + * @status: tx descriptor status field + * Description: it shows the Transmit Process State for CSR5[22:20] + */ +static void show_tx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; + + switch (state) { + case 0: + pr_info("- TX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- TX (Running):Fetching the Tx desc\n"); + break; + case 2: + pr_info("- TX (Running): Waiting for end of tx\n"); + break; + case 3: + pr_info("- TX (Running): Reading the data " + "and queuing the data into the Tx buf\n"); + break; + case 6: + pr_info("- TX (Suspended): Tx Buff Underflow " + "or an unavailable Transmit descriptor\n"); + break; + case 7: + pr_info("- TX (Running): Closing Tx descriptor\n"); + break; + default: + break; + } + return; +} + +/** + * show_rx_process_state + * @status: rx descriptor status field + * Description: it shows the Receive Process State for CSR5[19:17] + */ +static void show_rx_process_state(unsigned int status) +{ + unsigned int state; + state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; + + switch (state) { + case 0: + pr_info("- RX (Stopped): Reset or Stop command\n"); + break; + case 1: + pr_info("- RX (Running): Fetching the Rx desc\n"); + break; + case 2: + pr_info("- RX (Running):Checking for end of pkt\n"); + break; + case 3: + pr_info("- RX (Running): Waiting for Rx pkt\n"); + break; + case 4: + pr_info("- RX (Suspended): Unavailable Rx buf\n"); + break; + case 5: + pr_info("- RX (Running): Closing Rx descriptor\n"); + break; + case 6: + pr_info("- RX(Running): Flushing the current frame" + " from the Rx buf\n"); + break; + case 7: + pr_info("- RX (Running): Queuing the Rx frame" + " from the Rx buf into memory\n"); + break; + default: + break; + } + return; +} +#endif + +/** + * stmmac_tx: + * @priv: private driver structure + * Description: it reclaims resources after transmission completes. + */ +static void stmmac_tx(struct stmmac_priv *priv) +{ + unsigned int txsize = priv->dma_tx_size; + unsigned long ioaddr = priv->dev->base_addr; + + while (priv->dirty_tx != priv->cur_tx) { + int last; + unsigned int entry = priv->dirty_tx % txsize; + struct sk_buff *skb = priv->tx_skbuff[entry]; + struct dma_desc *p = priv->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->mac_type->ops->get_tx_owner(p)) + break; + + /* Verify tx error by looking at the last segment */ + last = priv->mac_type->ops->get_tx_ls(p); + if (likely(last)) { + int tx_error = + priv->mac_type->ops->tx_status(&priv->dev->stats, + &priv->xstats, + p, ioaddr); + if (likely(tx_error == 0)) { + priv->dev->stats.tx_packets++; + priv->xstats.tx_pkt_n++; + } else + priv->dev->stats.tx_errors++; + } + TX_DBG("%s: curr %d, dirty %d\n", __func__, + priv->cur_tx, priv->dirty_tx); + + if (likely(p->des2)) + dma_unmap_single(priv->device, p->des2, + priv->mac_type->ops->get_tx_len(p), + DMA_TO_DEVICE); + if (unlikely(p->des3)) + p->des3 = 0; + + if (likely(skb != NULL)) { + /* + * If there's room in the queue (limit it to size) + * we add this skb back into the pool, + * if it's the right size. + */ + if ((skb_queue_len(&priv->rx_recycle) < + priv->dma_rx_size) && + skb_recycle_check(skb, priv->dma_buf_sz)) + __skb_queue_head(&priv->rx_recycle, skb); + else + dev_kfree_skb(skb); + + priv->tx_skbuff[entry] = NULL; + } + + priv->mac_type->ops->release_tx_desc(p); + + entry = (++priv->dirty_tx) % txsize; + } + if (unlikely(netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_queue_stopped(priv->dev) && + stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) { + TX_DBG("%s: restart transmit\n", __func__); + netif_wake_queue(priv->dev); + } + netif_tx_unlock(priv->dev); + } + return; +} + +static inline void stmmac_enable_irq(struct stmmac_priv *priv) +{ +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else +#endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); +} + +static inline void stmmac_disable_irq(struct stmmac_priv *priv) +{ +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else +#endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); +} + +static int stmmac_has_work(struct stmmac_priv *priv) +{ + unsigned int has_work = 0; + int rxret, tx_work = 0; + + rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + + (priv->cur_rx % priv->dma_rx_size)); + + if (priv->dirty_tx != priv->cur_tx) + tx_work = 1; + + if (likely(!rxret || tx_work)) + has_work = 1; + + return has_work; +} + +static inline void _stmmac_schedule(struct stmmac_priv *priv) +{ + if (likely(stmmac_has_work(priv))) { + stmmac_disable_irq(priv); + napi_schedule(&priv->napi); + } +} + +#ifdef CONFIG_STMMAC_TIMER +void stmmac_schedule(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + priv->xstats.sched_timer_n++; + + _stmmac_schedule(priv); + + return; +} + +static void stmmac_no_timer_started(unsigned int x) +{; +}; + +static void stmmac_no_timer_stopped(void) +{; +}; +#endif + +/** + * stmmac_tx_err: + * @priv: pointer to the private device structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void stmmac_tx_err(struct stmmac_priv *priv) +{ + netif_stop_queue(priv->dev); + + stmmac_dma_stop_tx(priv->dev->base_addr); + dma_free_tx_skbufs(priv); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size); + priv->dirty_tx = 0; + priv->cur_tx = 0; + stmmac_dma_start_tx(priv->dev->base_addr); + + priv->dev->stats.tx_errors++; + netif_wake_queue(priv->dev); + + return; +} + +/** + * stmmac_dma_interrupt - Interrupt handler for the driver + * @dev: net device structure + * Description: Interrupt handler for the driver (DMA). + */ +static void stmmac_dma_interrupt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct stmmac_priv *priv = netdev_priv(dev); + /* read the status register (CSR5) */ + u32 intr_status = readl(ioaddr + DMA_STATUS); + + DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status); + +#ifdef STMMAC_DEBUG + /* It displays the DMA transmit process state (CSR5 register) */ + if (netif_msg_tx_done(priv)) + show_tx_process_state(intr_status); + if (netif_msg_rx_status(priv)) + show_rx_process_state(intr_status); +#endif + /* ABNORMAL interrupts */ + if (unlikely(intr_status & DMA_STATUS_AIS)) { + DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: "); + if (unlikely(intr_status & DMA_STATUS_UNF)) { + DBG(intr, INFO, "transmit underflow\n"); + if (unlikely(tc != SF_DMA_MODE) + && (tc <= 256)) { + /* Try to bump up the threshold */ + tc += 64; + priv->mac_type->ops->dma_mode(ioaddr, tc, + SF_DMA_MODE); + priv->xstats.threshold = tc; + } + stmmac_tx_err(priv); + priv->xstats.tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) { + DBG(intr, INFO, "transmit jabber\n"); + priv->xstats.tx_jabber_irq++; + } + if (unlikely(intr_status & DMA_STATUS_OVF)) { + DBG(intr, INFO, "recv overflow\n"); + priv->xstats.rx_overflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RU)) { + DBG(intr, INFO, "receive buffer unavailable\n"); + priv->xstats.rx_buf_unav_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RPS)) { + DBG(intr, INFO, "receive process stopped\n"); + priv->xstats.rx_process_stopped_irq++; + } + if (unlikely(intr_status & DMA_STATUS_RWT)) { + DBG(intr, INFO, "receive watchdog\n"); + priv->xstats.rx_watchdog_irq++; + } + if (unlikely(intr_status & DMA_STATUS_ETI)) { + DBG(intr, INFO, "transmit early interrupt\n"); + priv->xstats.tx_early_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TPS)) { + DBG(intr, INFO, "transmit process stopped\n"); + priv->xstats.tx_process_stopped_irq++; + stmmac_tx_err(priv); + } + if (unlikely(intr_status & DMA_STATUS_FBI)) { + DBG(intr, INFO, "fatal bus error\n"); + priv->xstats.fatal_bus_error_irq++; + stmmac_tx_err(priv); + } + } + + /* TX/RX NORMAL interrupts */ + if (intr_status & DMA_STATUS_NIS) { + priv->xstats.normal_irq_n++; + if (likely((intr_status & DMA_STATUS_RI) || + (intr_status & (DMA_STATUS_TI)))) + _stmmac_schedule(priv); + } + + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_info("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ + writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); + + DBG(intr, INFO, "\n\n"); + + return; +} + +/** + * stmmac_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_open(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret; + + /* Check that the MAC address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using the following linux command: + * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ + if (!is_valid_ether_addr(dev->dev_addr)) { + random_ether_addr(dev->dev_addr); + pr_warning("%s: generated random MAC address %pM\n", dev->name, + dev->dev_addr); + } + + stmmac_verify_args(); + + ret = stmmac_init_phy(dev); + if (unlikely(ret)) { + pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); + return ret; + } + + /* Request the IRQ lines */ + ret = request_irq(dev->irq, &stmmac_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, dev->irq, ret); + return ret; + } + +#ifdef CONFIG_STMMAC_TIMER + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + if (unlikely(priv->tm == NULL)) { + pr_err("%s: ERROR: timer memory alloc failed \n", __func__); + return -ENOMEM; + } + priv->tm->freq = tmrate; + + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ + if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { + pr_warning("stmmaceth: cannot attach the external timer.\n"); + tmrate = 0; + priv->tm->freq = 0; + priv->tm->timer_start = stmmac_no_timer_started; + priv->tm->timer_stop = stmmac_no_timer_stopped; + } else + priv->tm->enable = 1; +#endif + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); + priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); + priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + if (unlikely(priv->mac_type->ops->dma_init(ioaddr, + priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) { + + pr_err("%s: DMA initialization failed\n", __func__); + return -1; + } + + /* Copy the MAC addr into the HW */ + priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0); + /* Initialize the MAC Core */ + priv->mac_type->ops->core_init(ioaddr); + + priv->shutdown = 0; + + /* Initialise the MMC (if present) to disable all interrupts. */ + writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK); + writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK); + + /* Enable the MAC Rx/Tx */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + + /* Set the HW DMA mode and the COE */ + stmmac_dma_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); + priv->xstats.threshold = tc; + + /* Start the ball rolling... */ + DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + /* Dump DMA/MAC registers */ + if (netif_msg_hw(priv)) { + priv->mac_type->ops->dump_mac_regs(ioaddr); + priv->mac_type->ops->dump_dma_regs(ioaddr); + } + + if (priv->phydev) + phy_start(priv->phydev); + + napi_enable(&priv->napi); + skb_queue_head_init(&priv->rx_recycle); + netif_start_queue(dev); + return 0; +} + +/** + * stmmac_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int stmmac_release(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_stop_queue(dev); + +#ifdef CONFIG_STMMAC_TIMER + /* Stop and release the timer */ + stmmac_close_ext_timer(); + if (priv->tm != NULL) + kfree(priv->tm); +#endif + napi_disable(&priv->napi); + skb_queue_purge(&priv->rx_recycle); + + /* Free the IRQ lines */ + free_irq(dev->irq, dev); + + /* Stop TX/RX DMA and clear the descriptors */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC core */ + stmmac_mac_disable_tx(dev->base_addr); + stmmac_mac_disable_rx(dev->base_addr); + + netif_carrier_off(dev); + + return 0; +} + +/* + * To perform emulated hardware segmentation on skb. + */ +static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb) +{ + struct sk_buff *segs, *curr_skb; + int gso_segs = skb_shinfo(skb)->gso_segs; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(stmmac_tx_avail(priv) < gso_segs)) { + netif_stop_queue(priv->dev); + TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n", + __func__); + if (stmmac_tx_avail(priv) < gso_segs) + return NETDEV_TX_BUSY; + + netif_wake_queue(priv->dev); + } + TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n", + skb, skb->len); + + segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto sw_tso_end; + + do { + curr_skb = segs; + segs = segs->next; + TX_DBG("\t\tcurrent skb->len: %d, *curr %p," + "*next %p\n", curr_skb->len, curr_skb, segs); + curr_skb->next = NULL; + stmmac_xmit(curr_skb, priv->dev); + } while (segs); + +sw_tso_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb, + struct net_device *dev, + int csum_insertion) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry = priv->cur_tx % txsize; + struct dma_desc *desc = priv->dma_tx + entry; + + if (nopaged_len > BUF_SIZE_8KiB) { + + int buf2_size = nopaged_len - BUF_SIZE_8KiB; + + desc->des2 = dma_map_single(priv->device, skb->data, + BUF_SIZE_8KiB, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB, + csum_insertion); + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + desc->des2 = dma_map_single(priv->device, + skb->data + BUF_SIZE_8KiB, + buf2_size, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 0, + buf2_size, csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + priv->tx_skbuff[entry] = NULL; + } else { + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + desc->des3 = desc->des2 + BUF_SIZE_4KiB; + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + return entry; +} + +/** + * stmmac_xmit: + * @skb : the socket buffer + * @dev : device pointer + * Description : Tx entry point of the driver. + */ +static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned int txsize = priv->dma_tx_size; + unsigned int entry; + int i, csum_insertion = 0; + int nfrags = skb_shinfo(skb)->nr_frags; + struct dma_desc *desc, *first; + + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + /* This is a hard error, log it. */ + pr_err("%s: BUG! Tx Ring full when queue awake\n", + __func__); + } + return NETDEV_TX_BUSY; + } + + entry = priv->cur_tx % txsize; + +#ifdef STMMAC_XMIT_DEBUG + if ((skb->len > ETH_FRAME_LEN) || nfrags) + pr_info("stmmac xmit:\n" + "\tskb addr %p - len: %d - nopaged_len: %d\n" + "\tn_frags: %d - ip_summed: %d - %s gso\n", + skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed, + !skb_is_gso(skb) ? "isn't" : "is"); +#endif + + if (unlikely(skb_is_gso(skb))) + return stmmac_sw_tso(priv, skb); + + if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { + if (likely(priv->tx_coe == NO_HW_CSUM)) + skb_checksum_help(skb); + else + csum_insertion = 1; + } + + desc = priv->dma_tx + entry; + first = desc; + +#ifdef STMMAC_XMIT_DEBUG + if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN)) + pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n" + "\t\tn_frags: %d, ip_summed: %d\n", + skb->len, skb_headlen(skb), nfrags, skb->ip_summed); +#endif + priv->tx_skbuff[entry] = skb; + if (unlikely(skb->len >= BUF_SIZE_4KiB)) { + entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion); + desc = priv->dma_tx + entry; + } else { + unsigned int nopaged_len = skb_headlen(skb); + desc->des2 = dma_map_single(priv->device, skb->data, + nopaged_len, DMA_TO_DEVICE); + priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len, + csum_insertion); + } + + for (i = 0; i < nfrags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + int len = frag->size; + + entry = (++priv->cur_tx) % txsize; + desc = priv->dma_tx + entry; + + TX_DBG("\t[entry %d] segment len: %d\n", entry, len); + desc->des2 = dma_map_page(priv->device, frag->page, + frag->page_offset, + len, DMA_TO_DEVICE); + priv->tx_skbuff[entry] = NULL; + priv->mac_type->ops->prepare_tx_desc(desc, 0, len, + csum_insertion); + priv->mac_type->ops->set_tx_owner(desc); + } + + /* Interrupt on completition only for the latest segment */ + priv->mac_type->ops->close_tx_desc(desc); + +#ifdef CONFIG_STMMAC_TIMER + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); +#endif + /* To avoid raise condition */ + priv->mac_type->ops->set_tx_owner(first); + + priv->cur_tx++; + +#ifdef STMMAC_XMIT_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, " + "first=%p, nfrags=%d\n", + (priv->cur_tx % txsize), (priv->dirty_tx % txsize), + entry, first, nfrags); + display_ring(priv->dma_tx, txsize); + pr_info(">>> frame to be transmitted: "); + print_pkt(skb->data, skb->len); + } +#endif + if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) { + TX_DBG("%s: stop transmitted packets\n", __func__); + netif_stop_queue(dev); + } + + dev->stats.tx_bytes += skb->len; + + /* CSR1 enables the transmit DMA to check for new descriptor */ + writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND); + + return NETDEV_TX_OK; +} + +static inline void stmmac_rx_refill(struct stmmac_priv *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + struct dma_desc *p = priv->dma_rx; + + for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) { + unsigned int entry = priv->dirty_rx % rxsize; + if (likely(priv->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = __skb_dequeue(&priv->rx_recycle); + if (skb == NULL) + skb = netdev_alloc_skb_ip_align(priv->dev, + bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rx_skbuff[entry] = skb; + priv->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + (p + entry)->des2 = priv->rx_skbuff_dma[entry]; + if (unlikely(priv->is_gmac)) { + if (bfsize >= BUF_SIZE_8KiB) + (p + entry)->des3 = + (p + entry)->des2 + BUF_SIZE_8KiB; + } + RX_DBG(KERN_INFO "\trefill entry #%d\n", entry); + } + priv->mac_type->ops->set_rx_owner(p + entry); + } + return; +} + +static int stmmac_rx(struct stmmac_priv *priv, int limit) +{ + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->cur_rx % rxsize; + unsigned int next_entry; + unsigned int count = 0; + struct dma_desc *p = priv->dma_rx + entry; + struct dma_desc *p_next; + +#ifdef STMMAC_RX_DEBUG + if (netif_msg_hw(priv)) { + pr_debug(">>> stmmac_rx: descriptor ring:\n"); + display_ring(priv->dma_rx, rxsize); + } +#endif + count = 0; + while (!priv->mac_type->ops->get_rx_owner(p)) { + int status; + + if (count >= limit) + break; + + count++; + + next_entry = (++priv->cur_rx) % rxsize; + p_next = priv->dma_rx + next_entry; + prefetch(p_next); + + /* read the status of the incoming frame */ + status = (priv->mac_type->ops->rx_status(&priv->dev->stats, + &priv->xstats, p)); + if (unlikely(status == discard_frame)) + priv->dev->stats.rx_errors++; + else { + struct sk_buff *skb; + /* Length should omit the CRC */ + int frame_len = + priv->mac_type->ops->get_rx_frame_len(p) - 4; + +#ifdef STMMAC_RX_DEBUG + if (frame_len > ETH_FRAME_LEN) + pr_debug("\tRX frame size %d, COE status: %d\n", + frame_len, status); + + if (netif_msg_hw(priv)) + pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + p, entry, p->des2); +#endif + skb = priv->rx_skbuff[entry]; + if (unlikely(!skb)) { + pr_err("%s: Inconsistent Rx descriptor chain\n", + priv->dev->name); + priv->dev->stats.rx_dropped++; + break; + } + prefetch(skb->data - NET_IP_ALIGN); + priv->rx_skbuff[entry] = NULL; + + skb_put(skb, frame_len); + dma_unmap_single(priv->device, + priv->rx_skbuff_dma[entry], + priv->dma_buf_sz, DMA_FROM_DEVICE); +#ifdef STMMAC_RX_DEBUG + if (netif_msg_pktdata(priv)) { + pr_info(" frame received (%dbytes)", frame_len); + print_pkt(skb->data, frame_len); + } +#endif + skb->protocol = eth_type_trans(skb, priv->dev); + + if (unlikely(status == csum_none)) { + /* always for the old mac 10/100 */ + skb->ip_summed = CHECKSUM_NONE; + netif_receive_skb(skb); + } else { + skb->ip_summed = CHECKSUM_UNNECESSARY; + napi_gro_receive(&priv->napi, skb); + } + + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += frame_len; + priv->dev->last_rx = jiffies; + } + entry = next_entry; + p = p_next; /* use prefetched values */ + } + + stmmac_rx_refill(priv); + + priv->xstats.rx_pkt_n += count; + + return count; +} + +/** + * stmmac_poll - stmmac poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * This function implements the the reception process. + * Also it runs the TX completion thread + */ +static int stmmac_poll(struct napi_struct *napi, int budget) +{ + struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi); + int work_done = 0; + + priv->xstats.poll_n++; + stmmac_tx(priv); + work_done = stmmac_rx(priv, budget); + + if (work_done < budget) { + napi_complete(napi); + stmmac_enable_irq(priv); + } + return work_done; +} + +/** + * stmmac_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable tmrate. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void stmmac_tx_timeout(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + /* Clear Tx resources and restart transmitting again */ + stmmac_tx_err(priv); + return; +} + +/* Configuration changes (passed on by ifconfig) */ +static int stmmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + pr_warning("%s: can't change I/O address\n", dev->name); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != dev->irq) { + pr_warning("%s: can't change IRQ number %d\n", + dev->name, dev->irq); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +/** + * stmmac_multicast_list - entry point for multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. + * Return value: + * void. + */ +static void stmmac_multicast_list(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + priv->mac_type->ops->set_filter(dev); + spin_unlock(&priv->lock); + return; +} + +/** + * stmmac_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int stmmac_change_mtu(struct net_device *dev, int new_mtu) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int max_mtu; + + if (netif_running(dev)) { + pr_err("%s: must be stopped to change its MTU\n", dev->name); + return -EBUSY; + } + + if (priv->is_gmac) + max_mtu = JUMBO_LEN; + else + max_mtu = ETH_DATA_LEN; + + if ((new_mtu < 46) || (new_mtu > max_mtu)) { + pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static irqreturn_t stmmac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct stmmac_priv *priv = netdev_priv(dev); + + if (unlikely(!dev)) { + pr_err("%s: invalid dev pointer\n", __func__); + return IRQ_NONE; + } + + if (priv->is_gmac) { + unsigned long ioaddr = dev->base_addr; + /* To handle GMAC own interrupts */ + priv->mac_type->ops->host_irq_status(ioaddr); + } + stmmac_dma_interrupt(dev); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling receive - used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. */ +static void stmmac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + stmmac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/** + * stmmac_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently there are no special functionality supported in IOCTL, just the + * phy_mii_ioctl(...) can be invoked. + */ +static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct stmmac_priv *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + + spin_lock(&priv->lock); + ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + spin_unlock(&priv->lock); + default: + break; + } + return ret; +} + +#ifdef STMMAC_VLAN_TAG_USED +static void stmmac_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp); + + spin_lock(&priv->lock); + priv->vlgrp = grp; + spin_unlock(&priv->lock); + + return; +} +#endif + +static const struct net_device_ops stmmac_netdev_ops = { + .ndo_open = stmmac_open, + .ndo_start_xmit = stmmac_xmit, + .ndo_stop = stmmac_release, + .ndo_change_mtu = stmmac_change_mtu, + .ndo_set_multicast_list = stmmac_multicast_list, + .ndo_tx_timeout = stmmac_tx_timeout, + .ndo_do_ioctl = stmmac_ioctl, + .ndo_set_config = stmmac_config, +#ifdef STMMAC_VLAN_TAG_USED + .ndo_vlan_rx_register = stmmac_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = stmmac_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/** + * stmmac_probe - Initialization of the adapter . + * @dev : device pointer + * Description: The function initializes the network device structure for + * the STMMAC driver. It also calls the low level routines + * in order to init the HW (i.e. the DMA engine) + */ +static int stmmac_probe(struct net_device *dev) +{ + int ret = 0; + struct stmmac_priv *priv = netdev_priv(dev); + + ether_setup(dev); + + dev->netdev_ops = &stmmac_netdev_ops; + stmmac_set_ethtool_ops(dev); + + dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA); + dev->watchdog_timeo = msecs_to_jiffies(watchdog); +#ifdef STMMAC_VLAN_TAG_USED + /* Both mac100 and gmac support receive VLAN tag detection */ + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + if (priv->is_gmac) + priv->rx_csum = 1; + + if (flow_ctrl) + priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ + + priv->pause = pause; + netif_napi_add(dev, &priv->napi, stmmac_poll, 64); + + /* Get the MAC address */ + priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0); + + if (!is_valid_ether_addr(dev->dev_addr)) + pr_warning("\tno valid MAC address;" + "please, use ifconfig or nwhwconfig!\n"); + + ret = register_netdev(dev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", + __func__, ret); + return -ENODEV; + } + + DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n", + dev->name, (dev->features & NETIF_F_SG) ? "on" : "off", + (dev->features & NETIF_F_HW_CSUM) ? "on" : "off"); + + spin_lock_init(&priv->lock); + + return ret; +} + +/** + * stmmac_mac_device_setup + * @dev : device pointer + * Description: select and initialise the mac device (mac100 or Gmac). + */ +static int stmmac_mac_device_setup(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + struct mac_device_info *device; + + if (priv->is_gmac) + device = gmac_setup(ioaddr); + else + device = mac100_setup(ioaddr); + + if (!device) + return -ENOMEM; + + priv->mac_type = device; + + priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->wolopts = WAKE_MAGIC; /* Magic Frame */ + + return 0; +} + +static int stmmacphy_dvr_probe(struct platform_device *pdev) +{ + struct plat_stmmacphy_data *plat_dat; + plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data); + + pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n", + plat_dat->bus_id); + + return 0; +} + +static int stmmacphy_dvr_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver stmmacphy_driver = { + .driver = { + .name = PHY_RESOURCE_NAME, + }, + .probe = stmmacphy_dvr_probe, + .remove = stmmacphy_dvr_remove, +}; + +/** + * stmmac_associate_phy + * @dev: pointer to device structure + * @data: points to the private structure. + * Description: Scans through all the PHYs we have registered and checks if + * any are associated with our MAC. If so, then just fill in + * the blanks in our local context structure + */ +static int stmmac_associate_phy(struct device *dev, void *data) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)data; + struct plat_stmmacphy_data *plat_dat; + + plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data); + + DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__, + plat_dat->bus_id); + + /* Check that this phy is for the MAC being initialised */ + if (priv->bus_id != plat_dat->bus_id) + return 0; + + /* OK, this PHY is connected to the MAC. + Go ahead and get the parameters */ + DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__); + priv->phy_irq = + platform_get_irq_byname(to_platform_device(dev), "phyirq"); + DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__, + plat_dat->bus_id, priv->phy_irq); + + /* Override with kernel parameters if supplied XXX CRS XXX + * this needs to have multiple instances */ + if ((phyaddr >= 0) && (phyaddr <= 31)) + plat_dat->phy_addr = phyaddr; + + priv->phy_addr = plat_dat->phy_addr; + priv->phy_mask = plat_dat->phy_mask; + priv->phy_interface = plat_dat->interface; + priv->phy_reset = plat_dat->phy_reset; + + DBG(probe, DEBUG, "%s: exiting\n", __func__); + return 1; /* forces exit of driver_for_each_device() */ +} + +/** + * stmmac_dvr_probe + * @pdev: platform device pointer + * Description: the driver is initialized through platform_device. + */ +static int stmmac_dvr_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + unsigned int *addr = NULL; + struct net_device *ndev = NULL; + struct stmmac_priv *priv; + struct plat_stmmacenet_data *plat_dat; + + pr_info("STMMAC driver:\n\tplatform registration... "); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + pr_info("done!\n"); + + if (!request_mem_region(res->start, (res->end - res->start), + pdev->name)) { + pr_err("%s: ERROR: memory allocation failed" + "cannot get the I/O addr 0x%x\n", + __func__, (unsigned int)res->start); + ret = -EBUSY; + goto out; + } + + addr = ioremap(res->start, (res->end - res->start)); + if (!addr) { + pr_err("%s: ERROR: memory mapping failed \n", __func__); + ret = -ENOMEM; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct stmmac_priv)); + if (!ndev) { + pr_err("%s: ERROR: allocating the device\n", __func__); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* Get the MAC information */ + ndev->irq = platform_get_irq_byname(pdev, "macirq"); + if (ndev->irq == -ENXIO) { + pr_err("%s: ERROR: MAC IRQ configuration " + "information not found\n", __func__); + ret = -ENODEV; + goto out; + } + + priv = netdev_priv(ndev); + priv->device = &(pdev->dev); + priv->dev = ndev; + plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data); + priv->bus_id = plat_dat->bus_id; + priv->pbl = plat_dat->pbl; /* TLI */ + priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ + + platform_set_drvdata(pdev, ndev); + + /* Set the I/O base addr */ + ndev->base_addr = (unsigned long)addr; + + /* MAC HW revice detection */ + ret = stmmac_mac_device_setup(ndev); + if (ret < 0) + goto out; + + /* Network Device Registration */ + ret = stmmac_probe(ndev); + if (ret < 0) + goto out; + + /* associate a PHY - it is provided by another platform bus */ + if (!driver_for_each_device + (&(stmmacphy_driver.driver), NULL, (void *)priv, + stmmac_associate_phy)) { + pr_err("No PHY device is associated with this MAC!\n"); + ret = -ENODEV; + goto out; + } + + priv->fix_mac_speed = plat_dat->fix_mac_speed; + priv->bsp_priv = plat_dat->bsp_priv; + + pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n" + "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name, + pdev->id, ndev->irq, (unsigned int)addr); + + /* MDIO bus Registration */ + pr_debug("\tMDIO bus (id: %d)...", priv->bus_id); + ret = stmmac_mdio_register(ndev); + if (ret < 0) + goto out; + pr_debug("registered!\n"); + +out: + if (ret < 0) { + platform_set_drvdata(pdev, NULL); + release_mem_region(res->start, (res->end - res->start)); + if (addr != NULL) + iounmap(addr); + } + + return ret; +} + +/** + * stmmac_dvr_remove + * @pdev: platform device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings, + * unregisters the MDIO bus and unmaps the allocated memory. + */ +static int stmmac_dvr_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + pr_info("%s:\n\tremoving driver", __func__); + + stmmac_dma_stop_rx(ndev->base_addr); + stmmac_dma_stop_tx(ndev->base_addr); + + stmmac_mac_disable_rx(ndev->base_addr); + stmmac_mac_disable_tx(ndev->base_addr); + + netif_carrier_off(ndev); + + stmmac_mdio_unregister(ndev); + + platform_set_drvdata(pdev, NULL); + unregister_netdev(ndev); + + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, (res->end - res->start)); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + int dis_ic = 0; + + if (!dev || !netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (state.event == PM_EVENT_SUSPEND) { + netif_device_detach(dev); + netif_stop_queue(dev); + if (priv->phydev) + phy_stop(priv->phydev); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_stop(); + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif + napi_disable(&priv->napi); + + /* Stop TX/RX DMA */ + stmmac_dma_stop_tx(dev->base_addr); + stmmac_dma_stop_rx(dev->base_addr); + /* Clear the Rx/Tx descriptors */ + priv->mac_type->ops->init_rx_desc(priv->dma_rx, + priv->dma_rx_size, dis_ic); + priv->mac_type->ops->init_tx_desc(priv->dma_tx, + priv->dma_tx_size); + + stmmac_mac_disable_tx(dev->base_addr); + + if (device_may_wakeup(&(pdev->dev))) { + /* Enable Power down mode by programming the PMT regs */ + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, + priv->wolopts); + } else { + stmmac_mac_disable_rx(dev->base_addr); + } + } else { + priv->shutdown = 1; + /* Although this can appear slightly redundant it actually + * makes fast the standby operation and guarantees the driver + * working if hibernation is on media. */ + stmmac_release(dev); + } + + spin_unlock(&priv->lock); + return 0; +} + +static int stmmac_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct stmmac_priv *priv = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + if (!netif_running(dev)) + return 0; + + spin_lock(&priv->lock); + + if (priv->shutdown) { + /* Re-open the interface and re-init the MAC/DMA + and the rings. */ + stmmac_open(dev); + goto out_resume; + } + + /* Power Down bit, into the PM register, is cleared + * automatically as soon as a magic packet or a Wake-up frame + * is received. Anyway, it's better to manually clear + * this bit because it can generate problems while resuming + * from another devices (e.g. serial console). */ + if (device_may_wakeup(&(pdev->dev))) + if (priv->wolenabled == PMT_SUPPORTED) + priv->mac_type->ops->pmt(dev->base_addr, 0); + + netif_device_attach(dev); + + /* Enable the MAC and DMA */ + stmmac_mac_enable_rx(ioaddr); + stmmac_mac_enable_tx(ioaddr); + stmmac_dma_start_tx(ioaddr); + stmmac_dma_start_rx(ioaddr); + +#ifdef CONFIG_STMMAC_TIMER + priv->tm->timer_start(tmrate); +#endif + napi_enable(&priv->napi); + + if (priv->phydev) + phy_start(priv->phydev); + + netif_start_queue(dev); + +out_resume: + spin_unlock(&priv->lock); + return 0; +} +#endif + +static struct platform_driver stmmac_driver = { + .driver = { + .name = STMMAC_RESOURCE_NAME, + }, + .probe = stmmac_dvr_probe, + .remove = stmmac_dvr_remove, +#ifdef CONFIG_PM + .suspend = stmmac_suspend, + .resume = stmmac_resume, +#endif + +}; + +/** + * stmmac_init_module - Entry point for the driver + * Description: This function is the entry point for the driver. + */ +static int __init stmmac_init_module(void) +{ + int ret; + + if (platform_driver_register(&stmmacphy_driver)) { + pr_err("No PHY devices registered!\n"); + return -ENODEV; + } + + ret = platform_driver_register(&stmmac_driver); + return ret; +} + +/** + * stmmac_cleanup_module - Cleanup routine for the driver + * Description: This function is the cleanup routine for the driver. + */ +static void __exit stmmac_cleanup_module(void) +{ + platform_driver_unregister(&stmmacphy_driver); + platform_driver_unregister(&stmmac_driver); +} + +#ifndef MODULE +static int __init stmmac_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "debug:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&debug); + else if (!strncmp(opt, "phyaddr:", 8)) + strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr); + else if (!strncmp(opt, "dma_txsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_txsize); + else if (!strncmp(opt, "dma_rxsize:", 11)) + strict_strtoul(opt + 11, 0, + (unsigned long *)&dma_rxsize); + else if (!strncmp(opt, "buf_sz:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); + else if (!strncmp(opt, "tc:", 3)) + strict_strtoul(opt + 3, 0, (unsigned long *)&tc); + else if (!strncmp(opt, "tx_coe:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); + else if (!strncmp(opt, "watchdog:", 9)) + strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); + else if (!strncmp(opt, "flow_ctrl:", 10)) + strict_strtoul(opt + 10, 0, + (unsigned long *)&flow_ctrl); + else if (!strncmp(opt, "pause:", 6)) + strict_strtoul(opt + 6, 0, (unsigned long *)&pause); +#ifdef CONFIG_STMMAC_TIMER + else if (!strncmp(opt, "tmrate:", 7)) + strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate); +#endif + } + return 0; +} + +__setup("stmmaceth=", stmmac_cmdline_opt); +#endif + +module_init(stmmac_init_module); +module_exit(stmmac_cleanup_module); + +MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL"); |