diff options
Diffstat (limited to 'drivers/net/tulip')
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 13 | ||||
| -rw-r--r-- | drivers/net/tulip/eeprom.c | 16 | ||||
| -rw-r--r-- | drivers/net/tulip/media.c | 3 | ||||
| -rw-r--r-- | drivers/net/tulip/tulip_core.c | 4 | ||||
| -rw-r--r-- | drivers/net/tulip/winbond-840.c | 3 |
5 files changed, 28 insertions, 11 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index e25f33df223..7b899702ceb 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -78,6 +78,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/pci.h> +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -354,7 +355,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); err = -ENODEV; goto err_out_free; @@ -743,11 +744,6 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id, struct pt_regs *regs) DMFE_DBUG(0, "dmfe_interrupt()", 0); - if (!dev) { - DMFE_DBUG(1, "dmfe_interrupt() without DEVICE arg", 0); - return IRQ_NONE; - } - spin_lock_irqsave(&db->lock, flags); /* Got DM910X status */ @@ -1806,7 +1802,7 @@ static void dmfe_parse_srom(struct dmfe_board_info * db) if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { /* SROM V4.01 */ /* Get NIC support media mode */ - db->NIC_capability = le16_to_cpup(srom + 34); + db->NIC_capability = le16_to_cpup((__le16 *)srom + 34/2); db->PHY_reg4 = 0; for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { switch( db->NIC_capability & tmp_reg ) { @@ -1818,7 +1814,8 @@ static void dmfe_parse_srom(struct dmfe_board_info * db) } /* Media Mode Force or not check */ - dmfe_mode = le32_to_cpup(srom + 34) & le32_to_cpup(srom + 36); + dmfe_mode = le32_to_cpup((__le32 *)srom + 34/4) & + le32_to_cpup((__le32 *)srom + 36/4); switch(dmfe_mode) { case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index ac5bf49ff60..fbd9ab60b05 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -63,6 +63,22 @@ static struct eeprom_fixup eeprom_fixups[] __devinitdata = { */ { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 } }, + {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */ + 0x0000, /* 0 == high offset, 0 == gap */ + 0x0800, /* Default Autoselect */ + 0x8001, /* 1 leaf, extended type, bogus len */ + 0x0003, /* Type 3 (MII), PHY #0 */ + 0x0400, /* 0 init instr, 4 reset instr */ + 0x0801, /* Set control mode, GP0 output */ + 0x0000, /* Drive GP0 Low (RST is active low) */ + 0x0800, /* control mode, GP0 input (undriven) */ + 0x0000, /* clear control mode */ + 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */ + 0x01e0, /* Advertise all above */ + 0x5000, /* FDX all above */ + 0x1800, /* Set fast TTM in 100bt modes */ + 0x0000, /* PHY cannot be unplugged */ + }}, {NULL}}; diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index 919c40cd635..e26c31f944b 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -400,6 +400,9 @@ void tulip_select_media(struct net_device *dev, int startup) } tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0); + + mdelay(1); + return; } diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index e0ae3ed6e57..cfc346e72d6 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1514,8 +1514,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, (PCI_SLOT(pdev->devfn) == 12))) { /* Cobalt MAC address in first EEPROM locations. */ sa_offset = 0; - /* No media table either */ - tp->flags &= ~HAS_MEDIA_TABLE; + /* Ensure our media table fixup get's applied */ + memcpy(ee_data + 16, ee_data, 8); } #endif #ifdef CONFIG_GSC diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index caff2f59016..db4b32c2369 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -121,6 +121,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/pci.h> +#include <linux/dma-mapping.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> @@ -394,7 +395,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, irq = pdev->irq; - if (pci_set_dma_mask(pdev,0xFFFFffff)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n", pci_name(pdev)); return -EIO; |