diff options
Diffstat (limited to 'drivers/net/wimax/i2400m')
| -rw-r--r-- | drivers/net/wimax/i2400m/control.c | 14 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/driver.c | 11 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 19 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/rx.c | 677 |
4 files changed, 695 insertions, 26 deletions
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index 4073c3e93bd..b3cadb626fe 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -1312,10 +1312,12 @@ int i2400m_dev_initialize(struct i2400m *i2400m) struct i2400m_tlv_config_idle_parameters idle_params; struct i2400m_tlv_config_idle_timeout idle_timeout; struct i2400m_tlv_config_d2h_data_format df; + struct i2400m_tlv_config_dl_host_reorder dlhr; const struct i2400m_tlv_hdr *args[9]; unsigned argc = 0; d_fnstart(3, dev, "(i2400m %p)\n", i2400m); + /* Disable idle mode? (enabled by default) */ if (i2400m_idle_mode_disabled) { if (i2400m_le_v1_3(i2400m)) { idle_params.hdr.type = @@ -1335,12 +1337,24 @@ int i2400m_dev_initialize(struct i2400m *i2400m) } } if (i2400m_ge_v1_4(i2400m)) { + /* Enable extended RX data format? */ df.hdr.type = cpu_to_le16(I2400M_TLV_CONFIG_D2H_DATA_FORMAT); df.hdr.length = cpu_to_le16( sizeof(df) - sizeof(df.hdr)); df.format = 1; args[argc++] = &df.hdr; + + /* Enable RX data reordering? + * (switch flipped in rx.c:i2400m_rx_setup() after fw upload) */ + if (i2400m->rx_reorder) { + dlhr.hdr.type = + cpu_to_le16(I2400M_TLV_CONFIG_DL_HOST_REORDER); + dlhr.hdr.length = cpu_to_le16( + sizeof(dlhr) - sizeof(dlhr.hdr)); + dlhr.reorder = 1; + args[argc++] = &dlhr.hdr; + } } result = i2400m_set_init_config(i2400m, args, argc); if (result < 0) diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index e4f1ce5bc29..07a54bad237 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -76,6 +76,11 @@ MODULE_PARM_DESC(idle_mode_disabled, "If true, the device will not enable idle mode negotiation " "with the base station (when connected) to save power."); +int i2400m_rx_reorder_disabled; /* 0 (rx reorder enabled) by default */ +module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644); +MODULE_PARM_DESC(rx_reorder_disabled, + "If true, RX reordering will be disabled."); + /** * i2400m_queue_work - schedule work on a i2400m's queue * @@ -396,6 +401,9 @@ retry: result = i2400m_tx_setup(i2400m); if (result < 0) goto error_tx_setup; + result = i2400m_rx_setup(i2400m); + if (result < 0) + goto error_rx_setup; result = i2400m->bus_dev_start(i2400m); if (result < 0) goto error_bus_dev_start; @@ -430,6 +438,8 @@ error_fw_check: error_create_workqueue: i2400m->bus_dev_stop(i2400m); error_bus_dev_start: + i2400m_rx_release(i2400m); +error_rx_setup: i2400m_tx_release(i2400m); error_tx_setup: error_bootstrap: @@ -477,6 +487,7 @@ void __i2400m_dev_stop(struct i2400m *i2400m) i2400m->ready = 0; destroy_workqueue(i2400m->work_queue); i2400m->bus_dev_stop(i2400m); + i2400m_rx_release(i2400m); i2400m_tx_release(i2400m); wimax_state_change(wimax_dev, WIMAX_ST_DOWN); d_fnend(3, dev, "(i2400m %p) = 0\n", i2400m); diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 125c30594e6..3ae2df38b59 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -174,6 +174,7 @@ enum i2400m_reset_type { }; struct i2400m_reset_ctx; +struct i2400m_roq; /** * struct i2400m - descriptor for an Intel 2400m @@ -257,6 +258,9 @@ struct i2400m_reset_ctx; * force this to be the first field so that we can get from * netdev_priv() the right pointer. * + * @rx_reorder: 1 if RX reordering is enabled; this can only be + * set at probe time. + * * @state: device's state (as reported by it) * * @state_wq: waitqueue that is woken up whenever the state changes @@ -313,6 +317,12 @@ struct i2400m_reset_ctx; * * @rx_size_max: buggest RX message received. * + * @rx_roq: RX ReOrder queues. (fw >= v1.4) When packets are received + * out of order, the device will ask the driver to hold certain + * packets until the ones that are received out of order can be + * delivered. Then the driver can release them to the host. See + * drivers/net/i2400m/rx.c for details. + * * @init_mutex: Mutex used for serializing the device bringup * sequence; this way if the device reboots in the middle, we * don't try to do a bringup again while we are tearing down the @@ -377,6 +387,7 @@ struct i2400m { unsigned boot_mode:1; /* is the device in boot mode? */ unsigned sboot:1; /* signed or unsigned fw boot */ unsigned ready:1; /* all probing steps done */ + unsigned rx_reorder:1; /* RX reorder is enabled */ u8 trace_msg_from_user; /* echo rx msgs to 'trace' pipe */ /* typed u8 so debugfs/u8 can tweak */ enum i2400m_system_state state; @@ -405,10 +416,11 @@ struct i2400m { unsigned tx_pl_num, tx_pl_max, tx_pl_min, tx_num, tx_size_acc, tx_size_min, tx_size_max; - /* RX stats */ + /* RX stuff */ spinlock_t rx_lock; /* protect RX state */ unsigned rx_pl_num, rx_pl_max, rx_pl_min, rx_num, rx_size_acc, rx_size_min, rx_size_max; + struct i2400m_roq *rx_roq; /* not under rx_lock! */ struct mutex msg_mutex; /* serialize command execution */ struct completion msg_completion; @@ -442,6 +454,7 @@ void i2400m_init(struct i2400m *i2400m) wimax_dev_init(&i2400m->wimax_dev); i2400m->boot_mode = 1; + i2400m->rx_reorder = 1; init_waitqueue_head(&i2400m->state_wq); spin_lock_init(&i2400m->tx_lock); @@ -591,6 +604,9 @@ extern int i2400m_tx_setup(struct i2400m *); extern void i2400m_wake_tx_work(struct work_struct *); extern void i2400m_tx_release(struct i2400m *); +extern int i2400m_rx_setup(struct i2400m *); +extern void i2400m_rx_release(struct i2400m *); + extern void i2400m_net_rx(struct i2400m *, struct sk_buff *, unsigned, const void *, int); extern void i2400m_net_erx(struct i2400m *, struct sk_buff *, @@ -788,6 +804,7 @@ void __i2400m_msleep(unsigned ms) /* Module parameters */ extern int i2400m_idle_mode_disabled; +extern int i2400m_rx_reorder_disabled; #endif /* #ifndef __I2400M_H__ */ diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index cd525066d4b..02419bfd64b 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -39,7 +39,7 @@ * - Use skb_clone(), break up processing in chunks * - Split transport/device specific * - Make buffer size dynamic to exert less memory pressure - * + * - RX reorder support * * This handles the RX path. * @@ -77,14 +77,42 @@ * In firmware >= 1.4, RX packets have an extended header (16 * bytes). This header conveys information for management of host * reordering of packets (the device offloads storage of the packets - * for reordering to the host). - * - * Currently this information is not used as the current code doesn't - * enable host reordering. + * for reordering to the host). Read below for more information. * * The header is used as dummy space to emulate an ethernet header and * thus be able to act as an ethernet device without having to reallocate. * + * DATA RX REORDERING + * + * Starting in firmware v1.4, the device can deliver packets for + * delivery with special reordering information; this allows it to + * more effectively do packet management when some frames were lost in + * the radio traffic. + * + * Thus, for RX packets that come out of order, the device gives the + * driver enough information to queue them properly and then at some + * point, the signal to deliver the whole (or part) of the queued + * packets to the networking stack. There are 16 such queues. + * + * This only happens when a packet comes in with the "need reorder" + * flag set in the RX header. When such bit is set, the following + * operations might be indicated: + * + * - reset queue: send all queued packets to the OS + * + * - queue: queue a packet + * + * - update ws: update the queue's window start and deliver queued + * packets that meet the criteria + * + * - queue & update ws: queue a packet, update the window start and + * deliver queued packets that meet the criteria + * + * (delivery criteria: the packet's [normalized] sequence number is + * lower than the new [normalized] window start). + * + * See the i2400m_roq_*() functions for details. + * * ROADMAP * * i2400m_rx @@ -94,6 +122,17 @@ * i2400m_net_rx * i2400m_rx_edata * i2400m_net_erx + * i2400m_roq_reset + * i2400m_net_erx + * i2400m_roq_queue + * __i2400m_roq_queue + * i2400m_roq_update_ws + * __i2400m_roq_update_ws + * i2400m_net_erx + * i2400m_roq_queue_update_ws + * __i2400m_roq_queue + * __i2400m_roq_update_ws + * i2400m_net_erx * i2400m_rx_ctl * i2400m_msg_size_check * i2400m_report_hook_work [in a workqueue] @@ -330,6 +369,469 @@ error_check: return; } + +/* + * Reorder queue data stored on skb->cb while the skb is queued in the + * reorder queues. + */ +struct i2400m_roq_data { + unsigned sn; /* Serial number for the skb */ + enum i2400m_cs cs; /* packet type for the skb */ +}; + + +/* + * ReOrder Queue + * + * @ws: Window Start; sequence number where the current window start + * is for this queue + * @queue: the skb queue itself + * @log: circular ring buffer used to log information about the + * reorder process in this queue that can be displayed in case of + * error to help diagnose it. + * + * This is the head for a list of skbs. In the skb->cb member of the + * skb when queued here contains a 'struct i2400m_roq_data' were we + * store the sequence number (sn) and the cs (packet type) coming from + * the RX payload header from the device. + */ +struct i2400m_roq +{ + unsigned ws; + struct sk_buff_head queue; + struct i2400m_roq_log *log; +}; + + +static +void __i2400m_roq_init(struct i2400m_roq *roq) +{ + roq->ws = 0; + skb_queue_head_init(&roq->queue); +} + + +static +unsigned __i2400m_roq_index(struct i2400m *i2400m, struct i2400m_roq *roq) +{ + return ((unsigned long) roq - (unsigned long) i2400m->rx_roq) + / sizeof(*roq); +} + + +/* + * Normalize a sequence number based on the queue's window start + * + * nsn = (sn - ws) % 2048 + * + * Note that if @sn < @roq->ws, we still need a positive number; %'s + * sign is implementation specific, so we normalize it by adding 2048 + * to bring it to be positive. + */ +static +unsigned __i2400m_roq_nsn(struct i2400m_roq *roq, unsigned sn) +{ + int r; + r = ((int) sn - (int) roq->ws) % 2048; + if (r < 0) + r += 2048; + return r; +} + + +/* + * Circular buffer to keep the last N reorder operations + * + * In case something fails, dumb then to try to come up with what + * happened. + */ +enum { + I2400M_ROQ_LOG_LENGTH = 32, +}; + +struct i2400m_roq_log { + struct i2400m_roq_log_entry { + enum i2400m_ro_type type; + unsigned ws, count, sn, nsn, new_ws; + } entry[I2400M_ROQ_LOG_LENGTH]; + unsigned in, out; +}; + + +/* Print a log entry */ +static +void i2400m_roq_log_entry_print(struct i2400m *i2400m, unsigned index, + unsigned e_index, + struct i2400m_roq_log_entry *e) +{ + struct device *dev = i2400m_dev(i2400m); + + switch(e->type) { + case I2400M_RO_TYPE_RESET: + dev_err(dev, "q#%d reset ws %u cnt %u sn %u/%u" + " - new nws %u\n", + index, e->ws, e->count, e->sn, e->nsn, e->new_ws); + break; + case I2400M_RO_TYPE_PACKET: + dev_err(dev, "q#%d queue ws %u cnt %u sn %u/%u\n", + index, e->ws, e->count, e->sn, e->nsn); + break; + case I2400M_RO_TYPE_WS: + dev_err(dev, "q#%d update_ws ws %u cnt %u sn %u/%u" + " - new nws %u\n", + index, e->ws, e->count, e->sn, e->nsn, e->new_ws); + break; + case I2400M_RO_TYPE_PACKET_WS: + dev_err(dev, "q#%d queue_update_ws ws %u cnt %u sn %u/%u" + " - new nws %u\n", + index, e->ws, e->count, e->sn, e->nsn, e->new_ws); + break; + default: + dev_err(dev, "q#%d BUG? entry %u - unknown type %u\n", + index, e_index, e->type); + break; + } +} + + +static +void i2400m_roq_log_add(struct i2400m *i2400m, + struct i2400m_roq *roq, enum i2400m_ro_type type, + unsigned ws, unsigned count, unsigned sn, + unsigned nsn, unsigned new_ws) +{ + struct i2400m_roq_log_entry *e; + unsigned cnt_idx; + int index = __i2400m_roq_index(i2400m, roq); + + /* if we run out of space, we eat from the end */ + if (roq->log->in - roq->log->out == I2400M_ROQ_LOG_LENGTH) + roq->log->out++; + cnt_idx = roq->log->in++ % I2400M_ROQ_LOG_LENGTH; + e = &roq->log->entry[cnt_idx]; + + e->type = type; + e->ws = ws; + e->count = count; + e->sn = sn; + e->nsn = nsn; + e->new_ws = new_ws; + + if (d_test(1)) + i2400m_roq_log_entry_print(i2400m, index, cnt_idx, e); +} + + +/* Dump all the entries in the FIFO and reinitialize it */ +static +void i2400m_roq_log_dump(struct i2400m *i2400m, struct i2400m_roq *roq) +{ + unsigned cnt, cnt_idx; + struct i2400m_roq_log_entry *e; + int index = __i2400m_roq_index(i2400m, roq); + + BUG_ON(roq->log->out > roq->log->in); + for (cnt = roq->log->out; cnt < roq->log->in; cnt++) { + cnt_idx = cnt % I2400M_ROQ_LOG_LENGTH; + e = &roq->log->entry[cnt_idx]; + i2400m_roq_log_entry_print(i2400m, index, cnt_idx, e); + memset(e, 0, sizeof(*e)); + } + roq->log->in = roq->log->out = 0; +} + + +/* + * Backbone for the queuing of an skb (by normalized sequence number) + * + * @i2400m: device descriptor + * @roq: reorder queue where to add + * @skb: the skb to add + * @sn: the sequence number of the skb + * @nsn: the normalized sequence number of the skb (pre-computed by the + * caller from the @sn and @roq->ws). + * + * We try first a couple of quick cases: + * + * - the queue is empty + * - the skb would be appended to the queue + * + * These will be the most common operations. + * + * If these fail, then we have to do a sorted insertion in the queue, + * which is the slowest path. + * + * We don't have to acquire a reference count as we are going to own it. + */ +static +void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, + struct sk_buff *skb, unsigned sn, unsigned nsn) +{ + struct device *dev = i2400m_dev(i2400m); + struct sk_buff *skb_itr; + struct i2400m_roq_data *roq_data_itr, *roq_data; + unsigned nsn_itr; + + d_fnstart(4, dev, "(i2400m %p roq %p skb %p sn %u nsn %u)\n", + i2400m, roq, skb, sn, nsn); + + roq_data = (struct i2400m_roq_data *) &skb->cb; + BUILD_BUG_ON(sizeof(*roq_data) > sizeof(skb->cb)); + roq_data->sn = sn; + d_printf(3, dev, "ERX: roq %p [ws %u] nsn %d sn %u\n", + roq, roq->ws, nsn, roq_data->sn); + + /* Queues will be empty on not-so-bad environments, so try + * that first */ + if (skb_queue_empty(&roq->queue)) { + d_printf(2, dev, "ERX: roq %p - first one\n", roq); + __skb_queue_head(&roq->queue, skb); + goto out; + } + /* Now try append, as most of the operations will be that */ + skb_itr = skb_peek_tail(&roq->queue); + roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; + nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); + /* NSN bounds assumed correct (checked when it was queued) */ + if (nsn >= nsn_itr) { + d_printf(2, dev, "ERX: roq %p - appended after %p (nsn %d sn %u)\n", + roq, skb_itr, nsn_itr, roq_data_itr->sn); + __skb_queue_tail(&roq->queue, skb); + goto out; + } + /* None of the fast paths option worked. Iterate to find the + * right spot where to insert the packet; we know the queue is + * not empty, so we are not the first ones; we also know we + * are not going to be the last ones. The list is sorted, so + * we have to insert before the the first guy with an nsn_itr + * greater that our nsn. */ + skb_queue_walk(&roq->queue, skb_itr) { + roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; + nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); + /* NSN bounds assumed correct (checked when it was queued) */ + if (nsn_itr > nsn) { + d_printf(2, dev, "ERX: roq %p - queued before %p " + "(nsn %d sn %u)\n", roq, skb_itr, nsn_itr, + roq_data_itr->sn); + __skb_queue_before(&roq->queue, skb_itr, skb); + goto out; + } + } + /* If we get here, that is VERY bad -- print info to help + * diagnose and crash it */ + dev_err(dev, "SW BUG? failed to insert packet\n"); + dev_err(dev, "ERX: roq %p [ws %u] skb %p nsn %d sn %u\n", + roq, roq->ws, skb, nsn, roq_data->sn); + skb_queue_walk(&roq->queue, skb_itr) { + roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; + nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); + /* NSN bounds assumed correct (checked when it was queued) */ + dev_err(dev, "ERX: roq %p skb_itr %p nsn %d sn %u\n", + roq, skb_itr, nsn_itr, roq_data_itr->sn); + } + BUG(); +out: + d_fnend(4, dev, "(i2400m %p roq %p skb %p sn %u nsn %d) = void\n", + i2400m, roq, skb, sn, nsn); + return; +} + + +/* + * Backbone for the update window start operation + * + * @i2400m: device descriptor + * @roq: Reorder queue + * @sn: New sequence number + * + * Updates the window start of a queue; when doing so, it must deliver + * to the networking stack all the queued skb's whose normalized + * sequence number is lower than the new normalized window start. + */ +static +unsigned __i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, + unsigned sn) +{ + struct device *dev = i2400m_dev(i2400m); + struct sk_buff *skb_itr, *tmp_itr; + struct i2400m_roq_data *roq_data_itr; + unsigned new_nws, nsn_itr; + + new_nws = __i2400m_roq_nsn(roq, sn); + if (unlikely(new_nws >= 1024) && d_test(1)) { + dev_err(dev, "SW BUG? __update_ws new_nws %u (sn %u ws %u)\n", + new_nws, sn, roq->ws); + WARN_ON(1); + i2400m_roq_log_dump(i2400m, roq); + } + skb_queue_walk_safe(&roq->queue, skb_itr, tmp_itr) { + roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; + nsn_itr = __i2400m_roq_nsn(roq, roq_data_itr->sn); + /* NSN bounds assumed correct (checked when it was queued) */ + if (nsn_itr < new_nws) { + d_printf(2, dev, "ERX: roq %p - release skb %p " + "(nsn %u/%u new nws %u)\n", + roq, skb_itr, nsn_itr, roq_data_itr->sn, + new_nws); + __skb_unlink(skb_itr, &roq->queue); + i2400m_net_erx(i2400m, skb_itr, roq_data_itr->cs); + } + else + break; /* rest of packets all nsn_itr > nws */ + } + roq->ws = sn; + return new_nws; +} + + +/* + * Reset a queue + * + * @i2400m: device descriptor + * @cin: Queue Index + * + * Deliver all the packets and reset the window-start to zero. Name is + * kind of misleading. + */ +static +void i2400m_roq_reset(struct i2400m *i2400m, struct i2400m_roq *roq) +{ + struct device *dev = i2400m_dev(i2400m); + struct sk_buff *skb_itr, *tmp_itr; + struct i2400m_roq_data *roq_data_itr; + + d_fnstart(2, dev, "(i2400m %p roq %p)\n", i2400m, roq); + i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_RESET, + roq->ws, skb_queue_len(&roq->queue), + ~0, ~0, 0); + skb_queue_walk_safe(&roq->queue, skb_itr, tmp_itr) { + roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; + d_printf(2, dev, "ERX: roq %p - release skb %p (sn %u)\n", + roq, skb_itr, roq_data_itr->sn); + __skb_unlink(skb_itr, &roq->queue); + i2400m_net_erx(i2400m, skb_itr, roq_data_itr->cs); + } + roq->ws = 0; + d_fnend(2, dev, "(i2400m %p roq %p) = void\n", i2400m, roq); + return; +} + + +/* + * Queue a packet + * + * @i2400m: device descriptor + * @cin: Queue Index + * @skb: containing the packet data + * @fbn: First block number of the packet in @skb + * @lbn: Last block number of the packet in @skb + * + * The hardware is asking the driver to queue a packet for later + * delivery to the networking stack. + */ +static +void i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, + struct sk_buff * skb, unsigned lbn) +{ + struct device *dev = i2400m_dev(i2400m); + unsigned nsn, len; + + d_fnstart(2, dev, "(i2400m %p roq %p skb %p lbn %u) = void\n", + i2400m, roq, skb, lbn); + len = skb_queue_len(&roq->queue); + nsn = __i2400m_roq_nsn(roq, lbn); + if (unlikely(nsn >= 1024)) { + dev_err(dev, "SW BUG? queue nsn %d (lbn %u ws %u)\n", + nsn, lbn, roq->ws); + i2400m_roq_log_dump(i2400m, roq); + i2400m->bus_reset(i2400m, I2400M_RT_WARM); + } else { + __i2400m_roq_queue(i2400m, roq, skb, lbn, nsn); + i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET, + roq->ws, len, lbn, nsn, ~0); + } + d_fnend(2, dev, "(i2400m %p roq %p skb %p lbn %u) = void\n", + i2400m, roq, skb, lbn); + return; +} + + +/* + * Update the window start in a reorder queue and deliver all skbs + * with a lower window start + * + * @i2400m: device descriptor + * @roq: Reorder queue + * @sn: New sequence number + */ +static +void i2400m_roq_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, + unsigned sn) +{ + struct device *dev = i2400m_dev(i2400m); + unsigned old_ws, nsn, len; + + d_fnstart(2, dev, "(i2400m %p roq %p sn %u)\n", i2400m, roq, sn); + old_ws = roq->ws; + len = skb_queue_len(&roq->queue); + nsn = __i2400m_roq_update_ws(i2400m, roq, sn); + i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_WS, + old_ws, len, sn, nsn, roq->ws); + d_fnstart(2, dev, "(i2400m %p roq %p sn %u) = void\n", i2400m, roq, sn); + return; +} + + +/* + * Queue a packet and update the window start + * + * @i2400m: device descriptor + * @cin: Queue Index + * @skb: containing the packet data + * @fbn: First block number of the packet in @skb + * @sn: Last block number of the packet in @skb + * + * Note that unlike i2400m_roq_update_ws(), which sets the new window + * start to @sn, in here we'll set it to @sn + 1. + */ +static +void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, + struct sk_buff * skb, unsigned sn) +{ + struct device *dev = i2400m_dev(i2400m); + unsigned nsn, old_ws, len; + + d_fnstart(2, dev, "(i2400m %p roq %p skb %p sn %u)\n", + i2400m, roq, skb, sn); + len = skb_queue_len(&roq->queue); + nsn = __i2400m_roq_nsn(roq, sn); + old_ws = roq->ws; + if (unlikely(nsn >= 1024)) { + dev_err(dev, "SW BUG? queue_update_ws nsn %u (sn %u ws %u)\n", + nsn, sn, roq->ws); + i2400m_roq_log_dump(i2400m, roq); + i2400m->bus_reset(i2400m, I2400M_RT_WARM); + } else { + /* if the queue is empty, don't bother as we'd queue + * it and inmediately unqueue it -- just deliver it */ + if (len == 0) { + struct i2400m_roq_data *roq_data; + roq_data = (struct i2400m_roq_data *) &skb->cb; + i2400m_net_erx(i2400m, skb, roq_data->cs); + } + else { + __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); + __i2400m_roq_update_ws(i2400m, roq, sn + 1); + } + i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, + old_ws, len, sn, nsn, roq->ws); + } + d_fnend(2, dev, "(i2400m %p roq %p skb %p sn %u) = void\n", + i2400m, roq, skb, sn); + return; +} + + /* * Receive and send up an extended data packet * @@ -347,6 +849,28 @@ error_check: * having to copy packets around. * * This function handles said path. + * + * + * Receive and send up an extended data packet that requires no reordering + * + * @i2400m: device descriptor + * @skb_rx: skb that contains the extended data packet + * @single_last: 1 if the payload is the only one or the last one of + * the skb. + * @payload: pointer to the packet's data (past the actual extended + * data payload header). + * @size: size of the payload + * + * Pass over to the networking stack a data packet that might have + * reordering requirements. + * + * This needs to the decide if the skb in which the packet is + * contained can be reused or if it needs to be cloned. Then it has to + * be trimmed in the edges so that the beginning is the space for eth + * header and then pass it to i2400m_net_erx() for the stack + * + * Assumes the caller has verified the sanity of the payload (size, + * etc) already. */ static void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, @@ -357,53 +881,86 @@ void i2400m_rx_edata(struct i2400m *i2400m, struct sk_buff *skb_rx, struct net_device *net_dev = i2400m->wimax_dev.net_dev; struct sk_buff *skb; enum i2400m_cs cs; - unsigned reorder_needed; + u32 reorder; + unsigned ro_needed, ro_type, ro_cin, ro_sn; + struct i2400m_roq *roq; + struct i2400m_roq_data *roq_data; - d_fnstart(4, dev, "(i2400m %p skb_rx %p single %u payload %p " + BUILD_BUG_ON(ETH_HLEN > sizeof(*hdr)); + + d_fnstart(2, dev, "(i2400m %p skb_rx %p single %u payload %p " "size %zu)\n", i2400m, skb_rx, single_last, payload, size); if (size < sizeof(*hdr)) { dev_err(dev, "ERX: HW BUG? message with short header (%zu " "vs %zu bytes expected)\n", size, sizeof(*hdr)); goto error; } - reorder_needed = le32_to_cpu(hdr->reorder & I2400M_REORDER_NEEDED); - cs = hdr->cs; - if (reorder_needed) { - dev_err(dev, "ERX: HW BUG? reorder needed, it was disabled\n"); - goto error; - } - /* ok, so now decide if we want to clone or reuse the skb, - * pull and trim it so the beginning is the space for the eth - * header and pass it to i2400m_net_erx() for the stack */ + if (single_last) { skb = skb_get(skb_rx); - d_printf(3, dev, "ERX: reusing single payload skb %p\n", skb); + d_printf(3, dev, "ERX: skb %p reusing\n", skb); } else { skb = skb_clone(skb_rx, GFP_KERNEL); - d_printf(3, dev, "ERX: cloning %p\n", skb); if (skb == NULL) { dev_err(dev, "ERX: no memory to clone skb\n"); net_dev->stats.rx_dropped++; goto error_skb_clone; } + d_printf(3, dev, "ERX: skb %p cloned from %p\n", skb, skb_rx); } /* now we have to pull and trim so that the skb points to the * beginning of the IP packet; the netdev part will add the - * ethernet header as needed. */ - BUILD_BUG_ON(ETH_HLEN > sizeof(*hdr)); + * ethernet header as needed - we know there is enough space + * because we checked in i2400m_rx_edata(). */ skb_pull(skb, payload + sizeof(*hdr) - (void *) skb->data); - skb_trim(skb, (void *) skb_end_pointer(skb) - payload + sizeof(*hdr)); - i2400m_net_erx(i2400m, skb, cs); + skb_trim(skb, (void *) skb_end_pointer(skb) - payload - sizeof(*hdr)); + + reorder = le32_to_cpu(hdr->reorder); + ro_needed = reorder & I2400M_RO_NEEDED; + cs = hdr->cs; + if (ro_needed) { + ro_type = (reorder >> I2400M_RO_TYPE_SHIFT) & I2400M_RO_TYPE; + ro_cin = (reorder >> I2400M_RO_CIN_SHIFT) & I2400M_RO_CIN; + ro_sn = (reorder >> I2400M_RO_SN_SHIFT) & I2400M_RO_SN; + + roq = &i2400m->rx_roq[ro_cin]; + roq_data = (struct i2400m_roq_data *) &skb->cb; + roq_data->sn = ro_sn; + roq_data->cs = cs; + d_printf(2, dev, "ERX: reorder needed: " + "type %u cin %u [ws %u] sn %u/%u len %zuB\n", + ro_type, ro_cin, roq->ws, ro_sn, + __i2400m_roq_nsn(roq, ro_sn), size); + d_dump(2, dev, payload, size); + switch(ro_type) { + case I2400M_RO_TYPE_RESET: + i2400m_roq_reset(i2400m, roq); + kfree_skb(skb); /* no data here */ + break; + case I2400M_RO_TYPE_PACKET: + i2400m_roq_queue(i2400m, roq, skb, ro_sn); + break; + case I2400M_RO_TYPE_WS: + i2400m_roq_update_ws(i2400m, roq, ro_sn); + kfree_skb(skb); /* no data here */ + break; + case I2400M_RO_TYPE_PACKET_WS: + i2400m_roq_queue_update_ws(i2400m, roq, skb, ro_sn); + break; + default: + dev_err(dev, "HW BUG? unknown reorder type %u\n", ro_type); + } + } + else + i2400m_net_erx(i2400m, skb, cs); error_skb_clone: error: - d_fnend(4, dev, "(i2400m %p skb_rx %p single %u payload %p " + d_fnend(2, dev, "(i2400m %p skb_rx %p single %u payload %p " "size %zu) = void\n", i2400m, skb_rx, single_last, payload, size); return; } - - /* * Act on a received payload * @@ -632,3 +1189,73 @@ error_msg_hdr_check: return result; } EXPORT_SYMBOL_GPL(i2400m_rx); + + +/* + * Initialize the RX queue and infrastructure + * + * This sets up all the RX reordering infrastructures, which will not + * be used if reordering is not enabled or if the firmware does not + * support it. The device is told to do reordering in + * i2400m_dev_initialize(), where it also looks at the value of the + * i2400m->rx_reorder switch before taking a decission. + * + * Note we allocate the roq queues in one chunk and the actual logging + * support for it (logging) in another one and then we setup the + * pointers from the first to the last. + */ +int i2400m_rx_setup(struct i2400m *i2400m) +{ + int result = 0; + struct device *dev = i2400m_dev(i2400m); + + i2400m->rx_reorder = i2400m_rx_reorder_disabled? 0 : 1; + if (i2400m->rx_reorder) { + unsigned itr; + size_t size; + struct i2400m_roq_log *rd; + + result = -ENOMEM; + + size = sizeof(i2400m->rx_roq[0]) * (I2400M_RO_CIN + 1); + i2400m->rx_roq = kzalloc(size, GFP_KERNEL); + if (i2400m->rx_roq == NULL) { + dev_err(dev, "RX: cannot allocate %zu bytes for " + "reorder queues\n", size); + goto error_roq_alloc; + } + + size = sizeof(*i2400m->rx_roq[0].log) * (I2400M_RO_CIN + 1); + rd = kzalloc(size, GFP_KERNEL); + if (rd == NULL) { + dev_err(dev, "RX: cannot allocate %zu bytes for " + "reorder queues log areas\n", size); + result = -ENOMEM; + goto error_roq_log_alloc; + } + + for(itr = 0; itr < I2400M_RO_CIN + 1; itr++) { + __i2400m_roq_init(&i2400m->rx_roq[itr]); + i2400m->rx_roq[itr].log = &rd[itr]; + } + } + return 0; + +error_roq_log_alloc: + kfree(i2400m->rx_roq); +error_roq_alloc: + return result; +} + + +/* Tear down the RX queue and infrastructure */ +void i2400m_rx_release(struct i2400m *i2400m) +{ + if (i2400m->rx_reorder) { + unsigned itr; + for(itr = 0; itr < I2400M_RO_CIN + 1; itr++) + __skb_queue_purge(&i2400m->rx_roq[itr].queue); + kfree(i2400m->rx_roq[0].log); + kfree(i2400m->rx_roq); + } +} |