diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
-rw-r--r-- | drivers/net/wireless/Kconfig | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig new file mode 100644 index 00000000000..0aaa12c0c09 --- /dev/null +++ b/drivers/net/wireless/Kconfig @@ -0,0 +1,365 @@ +# +# Wireless LAN device configuration +# + +menu "Wireless LAN (non-hamradio)" + depends on NETDEVICES + +config NET_RADIO + bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" + ---help--- + Support for wireless LANs and everything having to do with radio, + but not with amateur radio or FM broadcasting. + + Saying Y here also enables the Wireless Extensions (creates + /proc/net/wireless and enables iwconfig access). The Wireless + Extension is a generic API allowing a driver to expose to the user + space configuration and statistics specific to common Wireless LANs. + The beauty of it is that a single set of tool can support all the + variations of Wireless LANs, regardless of their type (as long as + the driver supports Wireless Extension). Another advantage is that + these parameters may be changed on the fly without restarting the + driver (or Linux). If you wish to use Wireless Extensions with + wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch + the tools from + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + Some user-level drivers for scarab devices which don't require + special kernel support are available from + <ftp://shadow.cabi.net/pub/Linux/>. + +# Note : the cards are obsolete (can't buy them anymore), but the drivers +# are not, as people are still using them... +comment "Obsolete Wireless cards support (pre-802.11)" + depends on NET_RADIO && (INET || ISA || PCMCIA) + +config STRIP + tristate "STRIP (Metricom starmode radio IP)" + depends on NET_RADIO && INET + ---help--- + Say Y if you have a Metricom radio and intend to use Starmode Radio + IP. STRIP is a radio protocol developed for the MosquitoNet project + (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet + traffic using Metricom radios. Metricom radios are small, battery + powered, 100kbit/sec packet radio transceivers, about the size and + weight of a cellular telephone. (You may also have heard them called + "Metricom modems" but we avoid the term "modem" because it misleads + many people into thinking that you can plug a Metricom modem into a + phone line and use it as a modem.) + + You can use STRIP on any Linux machine with a serial port, although + it is obviously most useful for people with laptop computers. If you + think you might get a Metricom radio in the future, there is no harm + in saying Y to STRIP now, except that it makes the kernel a bit + bigger. + + To compile this as a module, choose M here: the module will be + called strip. + +config ARLAN + tristate "Aironet Arlan 655 & IC2200 DS support" + depends on NET_RADIO && ISA && !64BIT + ---help--- + Aironet makes Arlan, a class of wireless LAN adapters. These use the + www.Telxon.com chip, which is also used on several similar cards. + This driver is tested on the 655 and IC2200 series cards. Look at + <http://www.ylenurme.ee/~elmer/655/> for the latest information. + + The driver is built as two modules, arlan and arlan-proc. The latter + is the /proc interface and is not needed most of time. + + On some computers the card ends up in non-valid state after some + time. Use a ping-reset script to clear it. + +config WAVELAN + tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" + depends on NET_RADIO && ISA + ---help--- + The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is + a Radio LAN (wireless Ethernet-like Local Area Network) using the + radio frequencies 900 MHz and 2.4 GHz. + + This driver support the ISA version of the WaveLAN card. A separate + driver for the PCMCIA (PC-card) hardware is available in David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). + + If you want to use an ISA WaveLAN card under Linux, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Some more specific + information is contained in + <file:Documentation/networking/wavelan.txt> and in the source code + <file:drivers/net/wavelan.p.h>. + + You will also need the wireless tools package available from + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + Please read the man pages contained therein. + + To compile this driver as a module, choose M here: the module will be + called wavelan. + +config PCMCIA_WAVELAN + tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" + depends on NET_RADIO && PCMCIA + help + Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA + (PC-card) wireless Ethernet networking card to your computer. This + driver is for the non-IEEE-802.11 Wavelan cards. + + To compile this driver as a module, choose M here: the module will be + called wavelan_cs. If unsure, say N. + +config PCMCIA_NETWAVE + tristate "Xircom Netwave AirSurfer Pcmcia wireless support" + depends on NET_RADIO && PCMCIA + help + Say Y here if you intend to attach this type of PCMCIA (PC-card) + wireless Ethernet networking card to your computer. + + To compile this driver as a module, choose M here: the module will be + called netwave_cs. If unsure, say N. + +comment "Wireless 802.11 Frequency Hopping cards support" + depends on NET_RADIO && PCMCIA + +config PCMCIA_RAYCS + tristate "Aviator/Raytheon 2.4MHz wireless support" + depends on NET_RADIO && PCMCIA + ---help--- + Say Y here if you intend to attach an Aviator/Raytheon PCMCIA + (PC-card) wireless Ethernet networking card to your computer. + Please read the file <file:Documentation/networking/ray_cs.txt> for + details. + + To compile this driver as a module, choose M here: the module will be + called ray_cs. If unsure, say N. + +comment "Wireless 802.11b ISA/PCI cards support" + depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) + +config AIRO + tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" + depends on NET_RADIO && ISA && (PCI || BROKEN) + ---help--- + This is the standard Linux driver to support Cisco/Aironet ISA and + PCI 802.11 wireless cards. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + The driver can be compiled as a module and will be named "airo". + +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) + ---help--- + A driver for 802.11b wireless cards based based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + + Support for these adaptors is so far still incomplete and buggy. + You have been warned. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + + Support for these adaptors is so far still incomplete and buggy. + You have been warned. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" + depends on PCI && HERMES && EXPERIMENTAL + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config ATMEL + tristate "Atmel at76c50x chipset 802.11b support" + depends on NET_RADIO && EXPERIMENTAL + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. + + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + <http://www.thekelleys.org.uk/atmel> + +config PCI_ATMEL + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. + +# If Pcmcia is compiled in, offer Pcmcia cards... +comment "Wireless 802.11b Pcmcia/Cardbus cards support" + depends on NET_RADIO && PCMCIA + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on NET_RADIO && PCMCIA && HERMES + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + To use your PC-cards, you will need supporting software from David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). You also want to check out the PCMCIA-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + +config AIRO_CS + tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" + depends on NET_RADIO && PCMCIA + ---help--- + This is the standard Linux driver to support Cisco/Aironet PCMCIA + 802.11 wireless cards. This driver is the same as the Aironet + driver part of the Linux Pcmcia package. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also + supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom + 802.11b cards. + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + To use your PC-cards, you will need supporting software from David + Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> + for location). You also want to check out the PCMCIA-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on NET_RADIO && ATMEL && PCMCIA + select FW_LOADER + select CRC32 + ---help--- + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. + +config PCMCIA_WL3501 + tristate "Planet WL3501 PCMCIA cards" + depends on NET_RADIO && EXPERIMENTAL && PCMCIA + ---help--- + A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. + It has basic support for Linux wireless extensions and initial + micro support for ethtool. + +comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" + depends on NET_RADIO && PCI +config PRISM54 + tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' + depends on PCI && NET_RADIO && EXPERIMENTAL + select FW_LOADER + ---help--- + Enable PCI and Cardbus support for the following chipset based cards: + + ISL3880 - Prism GT 802.11 b/g + ISL3877 - Prism Indigo 802.11 a + ISL3890 - Prism Duette 802.11 a/b/g + + For a complete list of supported cards visit <http://prism54.org>. + Here is the latest confirmed list of supported cards: + + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + Allnet ALL0271 PCI Card + Compex WL54G Cardbus Card + Corega CG-WLCB54GT Cardbus Card + D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 + I-O Data WN-G54/CB Cardbus Card + Kobishi XG-300 aka Z-Com Cardbus Card + Netgear WG511 Cardbus Card + Ovislink WL-5400PCI PCI Card + Peabird WLG-PCI PCI Card + Sitecom WL-100i Cardbus Card + Sitecom WL-110i PCI Card + SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card + SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card + Z-Com XG-900 PCI Card + Zyxel G-100 Cardbus Card + + If you enable this you will need a firmware file as well. + You will need to copy this to /usr/lib/hotplug/firmware/isl3890. + You can get this non-GPL'd firmware file from the Prism54 project page: + <http://prism54.org> + You will also need the /etc/hotplug/firmware.agent script from + a current hotplug package. + + Note: You need a motherboard with DMA support to use any of these cards + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called prism54.ko. + +# yes, this works even when no drivers are selected +config NET_WIRELESS + bool + depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) + default y + +endmenu + |