diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 538 |
1 files changed, 313 insertions, 225 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b35c8813bef..6b7120a41ab 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. @@ -44,6 +44,8 @@ #include <asm/div64.h> +#define DRV_NAME "iwlagn" + #include "iwl-eeprom.h" #include "iwl-dev.h" #include "iwl-core.h" @@ -61,9 +63,7 @@ /* * module name, copyright, version, etc. - * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk */ - #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" #ifdef CONFIG_IWLWIFI_DEBUG @@ -179,9 +179,9 @@ static int iwl_commit_rxon(struct iwl_priv *priv) * 5000, but will not damage 4965 */ priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; - ret = iwl_agn_check_rxon_cmd(&priv->staging_rxon); + ret = iwl_agn_check_rxon_cmd(priv); if (ret) { - IWL_ERROR("Invalid RXON configuration. Not committing.\n"); + IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); return -EINVAL; } @@ -191,7 +191,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) if (!iwl_full_rxon_required(priv)) { ret = iwl_send_rxon_assoc(priv); if (ret) { - IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); + IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); return ret; } @@ -218,7 +218,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) * active_rxon back to what it was previously */ if (ret) { active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret); + IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret); return ret; } } @@ -242,7 +242,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) ret = iwl_send_cmd_pdu(priv, REPLY_RXON, sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); if (ret) { - IWL_ERROR("Error setting new RXON (%d)\n", ret); + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); return ret; } memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); @@ -256,7 +256,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) /* Add the broadcast address so we can send broadcast frames */ if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) == IWL_INVALID_STATION) { - IWL_ERROR("Error adding BROADCAST address for transmit.\n"); + IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n"); return -EIO; } @@ -267,13 +267,15 @@ static int iwl_commit_rxon(struct iwl_priv *priv) ret = iwl_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1); if (ret == IWL_INVALID_STATION) { - IWL_ERROR("Error adding AP address for TX.\n"); + IWL_ERR(priv, + "Error adding AP address for TX.\n"); return -EIO; } priv->assoc_station_added = 1; if (priv->default_wep_key && iwl_send_static_wepkey_cmd(priv, 0)) - IWL_ERROR("Could not send WEP static key.\n"); + IWL_ERR(priv, + "Could not send WEP static key.\n"); } /* Apply the new configuration @@ -282,7 +284,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) ret = iwl_send_cmd_pdu(priv, REPLY_RXON, sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); if (ret) { - IWL_ERROR("Error setting new RXON (%d)\n", ret); + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); return ret; } memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); @@ -294,7 +296,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv) * send a new TXPOWER command or we won't be able to Tx any frames */ ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); if (ret) { - IWL_ERROR("Error sending TX power (%d)\n", ret); + IWL_ERR(priv, "Error sending TX power (%d)\n", ret); return ret; } @@ -308,20 +310,6 @@ void iwl_update_chain_flags(struct iwl_priv *priv) iwl_commit_rxon(priv); } -static int iwl_send_bt_config(struct iwl_priv *priv) -{ - struct iwl_bt_cmd bt_cmd = { - .flags = 3, - .lead_time = 0xAA, - .max_kill = 1, - .kill_ack_mask = 0, - .kill_cts_mask = 0, - }; - - return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, - sizeof(struct iwl_bt_cmd), &bt_cmd); -} - static void iwl_clear_free_frames(struct iwl_priv *priv) { struct list_head *element; @@ -337,7 +325,7 @@ static void iwl_clear_free_frames(struct iwl_priv *priv) } if (priv->frames_count) { - IWL_WARNING("%d frames still in use. Did we lose one?\n", + IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", priv->frames_count); priv->frames_count = 0; } @@ -350,7 +338,7 @@ static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) if (list_empty(&priv->free_frames)) { frame = kzalloc(sizeof(*frame), GFP_KERNEL); if (!frame) { - IWL_ERROR("Could not allocate frame!\n"); + IWL_ERR(priv, "Could not allocate frame!\n"); return NULL; } @@ -452,7 +440,7 @@ static int iwl_send_beacon_cmd(struct iwl_priv *priv) frame = iwl_get_free_frame(priv); if (!frame) { - IWL_ERROR("Could not obtain free frame buffer for beacon " + IWL_ERR(priv, "Could not obtain free frame buffer for beacon " "command.\n"); return -ENOMEM; } @@ -469,6 +457,159 @@ static int iwl_send_beacon_cmd(struct iwl_priv *priv) return rc; } +static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx) +{ + struct iwl_tfd_tb *tb = &tfd->tbs[idx]; + + dma_addr_t addr = get_unaligned_le32(&tb->lo); + if (sizeof(dma_addr_t) > sizeof(u32)) + addr |= + ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16; + + return addr; +} + +static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) +{ + struct iwl_tfd_tb *tb = &tfd->tbs[idx]; + + return le16_to_cpu(tb->hi_n_len) >> 4; +} + +static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx, + dma_addr_t addr, u16 len) +{ + struct iwl_tfd_tb *tb = &tfd->tbs[idx]; + u16 hi_n_len = len << 4; + + put_unaligned_le32(addr, &tb->lo); + if (sizeof(dma_addr_t) > sizeof(u32)) + hi_n_len |= ((addr >> 16) >> 16) & 0xF; + + tb->hi_n_len = cpu_to_le16(hi_n_len); + + tfd->num_tbs = idx + 1; +} + +static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) +{ + return tfd->num_tbs & 0x1f; +} + +/** + * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] + * @priv - driver private data + * @txq - tx queue + * + * Does NOT advance any TFD circular buffer read/write indexes + * Does NOT free the TFD itself (which is within circular buffer) + */ +void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) +{ + struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds; + struct iwl_tfd *tfd; + struct pci_dev *dev = priv->pci_dev; + int index = txq->q.read_ptr; + int i; + int num_tbs; + + tfd = &tfd_tmp[index]; + + /* Sanity check on number of chunks */ + num_tbs = iwl_tfd_get_num_tbs(tfd); + + if (num_tbs >= IWL_NUM_OF_TBS) { + IWL_ERR(priv, "Too many chunks: %i\n", num_tbs); + /* @todo issue fatal error, it is quite serious situation */ + return; + } + + /* Unmap tx_cmd */ + if (num_tbs) + pci_unmap_single(dev, + pci_unmap_addr(&txq->cmd[index]->meta, mapping), + pci_unmap_len(&txq->cmd[index]->meta, len), + PCI_DMA_TODEVICE); + + /* Unmap chunks, if any. */ + for (i = 1; i < num_tbs; i++) { + pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i), + iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE); + + if (txq->txb) { + dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]); + txq->txb[txq->q.read_ptr].skb[i - 1] = NULL; + } + } +} + +int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + dma_addr_t addr, u16 len, + u8 reset, u8 pad) +{ + struct iwl_queue *q; + struct iwl_tfd *tfd, *tfd_tmp; + u32 num_tbs; + + q = &txq->q; + tfd_tmp = (struct iwl_tfd *)txq->tfds; + tfd = &tfd_tmp[q->write_ptr]; + + if (reset) + memset(tfd, 0, sizeof(*tfd)); + + num_tbs = iwl_tfd_get_num_tbs(tfd); + + /* Each TFD can point to a maximum 20 Tx buffers */ + if (num_tbs >= IWL_NUM_OF_TBS) { + IWL_ERR(priv, "Error can not send more than %d chunks\n", + IWL_NUM_OF_TBS); + return -EINVAL; + } + + BUG_ON(addr & ~DMA_BIT_MASK(36)); + if (unlikely(addr & ~IWL_TX_DMA_MASK)) + IWL_ERR(priv, "Unaligned address = %llx\n", + (unsigned long long)addr); + + iwl_tfd_set_tb(tfd, num_tbs, addr, len); + + return 0; +} + +/* + * Tell nic where to find circular buffer of Tx Frame Descriptors for + * given Tx queue, and enable the DMA channel used for that queue. + * + * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA + * channels supported in hardware. + */ +int iwl_hw_tx_queue_init(struct iwl_priv *priv, + struct iwl_tx_queue *txq) +{ + int ret; + unsigned long flags; + int txq_id = txq->q.id; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + /* Circular buffer (TFD queue in DRAM) physical base address */ + iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), + txq->q.dma_addr >> 8); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + + /****************************************************************************** * * Misc. internal state and helper functions @@ -520,9 +661,9 @@ static void iwl_ht_conf(struct iwl_priv *priv, */ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; - if (priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40MINUS) + if (conf_is_ht40_minus(&priv->hw->conf)) iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; - else if(priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40PLUS) + else if (conf_is_ht40_plus(&priv->hw->conf)) iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; /* If no above or below channel supplied disable FAT channel */ @@ -686,7 +827,7 @@ static void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode) RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; break; default: - IWL_ERROR("Unsupported interface type %d\n", mode); + IWL_ERR(priv, "Unsupported interface type %d\n", mode); break; } @@ -745,7 +886,7 @@ static int iwl_set_mode(struct iwl_priv *priv, int mode) cancel_delayed_work(&priv->scan_check); if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress after 100ms\n"); + IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); return -EAGAIN; } @@ -763,7 +904,7 @@ static void iwl_set_rate(struct iwl_priv *priv) hw = iwl_get_hw_mode(priv, priv->band); if (!hw) { - IWL_ERROR("Failed to set rate: unable to get hw mode\n"); + IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n"); return; } @@ -841,7 +982,7 @@ static void iwl_rx_reply_alive(struct iwl_priv *priv, queue_delayed_work(priv->workqueue, pwork, msecs_to_jiffies(5)); else - IWL_WARNING("uCode did not respond OK.\n"); + IWL_WARN(priv, "uCode did not respond OK.\n"); } static void iwl_rx_reply_error(struct iwl_priv *priv, @@ -849,7 +990,7 @@ static void iwl_rx_reply_error(struct iwl_priv *priv, { struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " + IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) " "seq 0x%04X ser 0x%08X\n", le32_to_cpu(pkt->u.err_resp.error_type), get_cmd_string(pkt->u.err_resp.cmd_id), @@ -902,7 +1043,7 @@ static void iwl_bg_beacon_update(struct work_struct *work) beacon = ieee80211_beacon_get(priv->hw, priv->vif); if (!beacon) { - IWL_ERROR("update beacon failed\n"); + IWL_ERR(priv, "update beacon failed\n"); return; } @@ -1193,7 +1334,7 @@ void iwl_rx_handle(struct iwl_priv *priv) if (rxb && rxb->skb) iwl_tx_cmd_complete(priv, rxb); else - IWL_WARNING("Claim null rxb?\n"); + IWL_WARN(priv, "Claim null rxb?\n"); } /* For now we just don't re-use anything. We can tweak this @@ -1357,7 +1498,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) /* Now service all interrupt bits discovered above. */ if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERROR("Microcode HW error detected. Restarting.\n"); + IWL_ERR(priv, "Microcode HW error detected. Restarting.\n"); /* Tell the device to stop sending interrupts */ iwl_disable_interrupts(priv); @@ -1397,13 +1538,16 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) hw_rf_kill ? "disable radio" : "enable radio"); /* driver only loads ucode once setting the interface up. - * the driver as well won't allow loading if RFKILL is set - * therefore no need to restart the driver from this handler + * the driver allows loading the ucode even if the radio + * is killed. Hence update the killswitch state here. The + * rfkill handler will care about restarting if needed. */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { - clear_bit(STATUS_RF_KILL_HW, &priv->status); - if (priv->is_open && !iwl_is_rfkill(priv)) - queue_work(priv->workqueue, &priv->up); + if (!test_bit(STATUS_ALIVE, &priv->status)) { + if (hw_rf_kill) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + queue_work(priv->workqueue, &priv->rf_kill); } handled |= CSR_INT_BIT_RF_KILL; @@ -1411,14 +1555,14 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) /* Chip got too hot and stopped itself */ if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERROR("Microcode CT kill error detected.\n"); + IWL_ERR(priv, "Microcode CT kill error detected.\n"); handled |= CSR_INT_BIT_CT_KILL; } /* Error detected by uCode */ if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n", - inta); + IWL_ERR(priv, "Microcode SW error detected. " + " Restarting 0x%X.\n", inta); iwl_irq_handle_error(priv); handled |= CSR_INT_BIT_SW_ERR; } @@ -1454,12 +1598,12 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) } if (inta & ~handled) - IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); + IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); if (inta & ~CSR_INI_SET_MASK) { - IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", + IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", inta & ~CSR_INI_SET_MASK); - IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh); + IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); } /* Re-enable all interrupts */ @@ -1511,7 +1655,7 @@ static irqreturn_t iwl_isr(int irq, void *data) if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { /* Hardware disappeared. It might have already raised * an interrupt */ - IWL_WARNING("HARDWARE GONE?? INTA == 0x%08x\n", inta); + IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); goto unplugged; } @@ -1584,7 +1728,7 @@ static int iwl_read_ucode(struct iwl_priv *priv) sprintf(buf, "%s%d%s", name_pre, index, ".ucode"); ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev); if (ret < 0) { - IWL_ERROR("%s firmware file req failed: Reason %d\n", + IWL_ERR(priv, "%s firmware file req failed: %d\n", buf, ret); if (ret == -ENOENT) continue; @@ -1592,8 +1736,11 @@ static int iwl_read_ucode(struct iwl_priv *priv) goto error; } else { if (index < api_max) - IWL_ERROR("Loaded firmware %s, which is deprecated. Please use API v%u instead.\n", + IWL_ERR(priv, "Loaded firmware %s, " + "which is deprecated. " + "Please use API v%u instead.\n", buf, api_max); + IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", buf, ucode_raw->size); break; @@ -1605,7 +1752,7 @@ static int iwl_read_ucode(struct iwl_priv *priv) /* Make sure that we got at least our header! */ if (ucode_raw->size < sizeof(*ucode)) { - IWL_ERROR("File size way too small!\n"); + IWL_ERR(priv, "File size way too small!\n"); ret = -EINVAL; goto err_release; } @@ -1626,7 +1773,7 @@ static int iwl_read_ucode(struct iwl_priv *priv) * on the API version read from firware header from here on forward */ if (api_ver < api_min || api_ver > api_max) { - IWL_ERROR("Driver unable to support your firmware API. " + IWL_ERR(priv, "Driver unable to support your firmware API. " "Driver supports v%u, firmware is v%u.\n", api_max, api_ver); priv->ucode_ver = 0; @@ -1634,16 +1781,16 @@ static int iwl_read_ucode(struct iwl_priv *priv) goto err_release; } if (api_ver != api_max) - IWL_ERROR("Firmware has old API version. Expected v%u, " + IWL_ERR(priv, "Firmware has old API version. Expected v%u, " "got v%u. New firmware can be obtained " "from http://www.intellinuxwireless.org.\n", api_max, api_ver); - printk(KERN_INFO DRV_NAME " loaded firmware version %u.%u.%u.%u\n", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver)); + IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", + IWL_UCODE_MAJOR(priv->ucode_ver), + IWL_UCODE_MINOR(priv->ucode_ver), + IWL_UCODE_API(priv->ucode_ver), + IWL_UCODE_SERIAL(priv->ucode_ver)); IWL_DEBUG_INFO("f/w package hdr ucode version raw = 0x%x\n", priv->ucode_ver); @@ -1791,7 +1938,7 @@ static int iwl_read_ucode(struct iwl_priv *priv) return 0; err_pci_alloc: - IWL_ERROR("failed to allocate pci memory\n"); + IWL_ERR(priv, "failed to allocate pci memory\n"); ret = -ENOMEM; iwl_dealloc_ucode_pci(priv); @@ -1837,8 +1984,8 @@ static void iwl_alive_start(struct iwl_priv *priv) iwl_clear_stations_table(priv); ret = priv->cfg->ops->lib->alive_notify(priv); if (ret) { - IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", - ret); + IWL_WARN(priv, + "Could not complete ALIVE transition [ntf]: %d\n", ret); goto restart; } @@ -2024,12 +2171,12 @@ static int __iwl_up(struct iwl_priv *priv) int ret; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARNING("Exit pending; will not bring the NIC up\n"); + IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); return -EIO; } if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERROR("ucode not available for device bringup\n"); + IWL_ERR(priv, "ucode not available for device bringup\n"); return -EIO; } @@ -2041,7 +2188,7 @@ static int __iwl_up(struct iwl_priv *priv) if (iwl_is_rfkill(priv)) { iwl_enable_interrupts(priv); - IWL_WARNING("Radio disabled by %s RF Kill switch\n", + IWL_WARN(priv, "Radio disabled by %s RF Kill switch\n", test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); return 0; } @@ -2050,7 +2197,7 @@ static int __iwl_up(struct iwl_priv *priv) ret = iwl_hw_nic_init(priv); if (ret) { - IWL_ERROR("Unable to init nic\n"); + IWL_ERR(priv, "Unable to init nic\n"); return ret; } @@ -2083,7 +2230,8 @@ static int __iwl_up(struct iwl_priv *priv) ret = priv->cfg->ops->lib->load_ucode(priv); if (ret) { - IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); + IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n", + ret); continue; } @@ -2104,7 +2252,7 @@ static int __iwl_up(struct iwl_priv *priv) /* tried to restart and config the device for as long as our * patience could withstand */ - IWL_ERROR("Unable to initialize device after %d attempts.\n", i); + IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); return -EIO; } @@ -2141,40 +2289,6 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_unlock(&priv->mutex); } -static void iwl_bg_rf_kill(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill); - - wake_up_interruptible(&priv->wait_command_queue); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - - if (!iwl_is_rfkill(priv)) { - IWL_DEBUG(IWL_DL_RF_KILL, - "HW and/or SW RF Kill no longer active, restarting " - "device\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->restart); - } else { - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) - IWL_DEBUG_RF_KILL("Can not turn radio back on - " - "disabled by SW switch\n"); - else - IWL_WARNING("Radio Frequency Kill Switch is On:\n" - "Kill switch must be turned off for " - "wireless networking to work.\n"); - } - mutex_unlock(&priv->mutex); - iwl_rfkill_set_hw_state(priv); -} - static void iwl_bg_run_time_calib_work(struct work_struct *work) { struct iwl_priv *priv = container_of(work, struct iwl_priv, @@ -2244,7 +2358,7 @@ static void iwl_post_associate(struct iwl_priv *priv) unsigned long flags; if (priv->iw_mode == NL80211_IFTYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __func__); + IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__); return; } @@ -2271,7 +2385,7 @@ static void iwl_post_associate(struct iwl_priv *priv) ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, sizeof(priv->rxon_timing), &priv->rxon_timing); if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " + IWL_WARN(priv, "REPLY_RXON_TIMING failed - " "Attempting to continue.\n"); priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; @@ -2317,7 +2431,7 @@ static void iwl_post_associate(struct iwl_priv *priv) break; default: - IWL_ERROR("%s Should not be called in %d mode\n", + IWL_ERR(priv, "%s Should not be called in %d mode\n", __func__, priv->iw_mode); break; } @@ -2353,31 +2467,9 @@ static int iwl_mac_start(struct ieee80211_hw *hw) { struct iwl_priv *priv = hw->priv; int ret; - u16 pci_cmd; IWL_DEBUG_MAC80211("enter\n"); - if (pci_enable_device(priv->pci_dev)) { - IWL_ERROR("Fail to pci_enable_device\n"); - return -ENODEV; - } - pci_restore_state(priv->pci_dev); - pci_enable_msi(priv->pci_dev); - - /* enable interrupts if needed: hw bug w/a */ - pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); - if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { - pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; - pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); - } - - ret = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED, - DRV_NAME, priv); - if (ret) { - IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - /* we should be verifying the device is ready to be opened */ mutex_lock(&priv->mutex); @@ -2388,9 +2480,9 @@ static int iwl_mac_start(struct ieee80211_hw *hw) if (!priv->ucode_code.len) { ret = iwl_read_ucode(priv); if (ret) { - IWL_ERROR("Could not read microcode: %d\n", ret); + IWL_ERR(priv, "Could not read microcode: %d\n", ret); mutex_unlock(&priv->mutex); - goto out_release_irq; + return ret; } } @@ -2401,7 +2493,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw) iwl_rfkill_set_hw_state(priv); if (ret) - goto out_release_irq; + return ret; if (iwl_is_rfkill(priv)) goto out; @@ -2418,10 +2510,9 @@ static int iwl_mac_start(struct ieee80211_hw *hw) UCODE_READY_TIMEOUT); if (!ret) { if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERROR("START_ALIVE timeout after %dms.\n", + IWL_ERR(priv, "START_ALIVE timeout after %dms.\n", jiffies_to_msecs(UCODE_READY_TIMEOUT)); - ret = -ETIMEDOUT; - goto out_release_irq; + return -ETIMEDOUT; } } @@ -2429,15 +2520,6 @@ out: priv->is_open = 1; IWL_DEBUG_MAC80211("leave\n"); return 0; - -out_release_irq: - free_irq(priv->pci_dev->irq, priv); -out_disable_msi: - pci_disable_msi(priv->pci_dev); - pci_disable_device(priv->pci_dev); - priv->is_open = 0; - IWL_DEBUG_MAC80211("leave - failed\n"); - return ret; } static void iwl_mac_stop(struct ieee80211_hw *hw) @@ -2465,10 +2547,10 @@ static void iwl_mac_stop(struct ieee80211_hw *hw) iwl_down(priv); flush_workqueue(priv->workqueue); - free_irq(priv->pci_dev->irq, priv); - pci_disable_msi(priv->pci_dev); - pci_save_state(priv->pci_dev); - pci_disable_device(priv->pci_dev); + + /* enable interrupts again in order to receive rfkill changes */ + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + iwl_enable_interrupts(priv); IWL_DEBUG_MAC80211("leave\n"); } @@ -2544,7 +2626,7 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - priv->current_ht_config.is_ht = conf->ht.enabled; + priv->current_ht_config.is_ht = conf_is_ht(conf); if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); @@ -2577,7 +2659,7 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if (priv->iw_mode == NL80211_IFTYPE_ADHOC && !is_channel_ibss(ch_info)) { - IWL_ERROR("channel %d in band %d not IBSS channel\n", + IWL_ERR(priv, "channel %d in band %d not IBSS channel\n", conf->channel->hw_value, conf->channel->band); ret = -EINVAL; goto out; @@ -2639,6 +2721,9 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) iwl_set_rate(priv); + /* call to ensure that 4965 rx_chain is set properly in monitor mode */ + iwl_set_rxon_chain(priv); + if (memcmp(&priv->active_rxon, &priv->staging_rxon, sizeof(priv->staging_rxon))) iwl_commit_rxon(priv); @@ -2672,7 +2757,7 @@ static void iwl_config_ap(struct iwl_priv *priv) ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, sizeof(priv->rxon_timing), &priv->rxon_timing); if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " + IWL_WARN(priv, "REPLY_RXON_TIMING failed - " "Attempting to continue.\n"); iwl_set_rxon_chain(priv); @@ -2778,7 +2863,7 @@ static int iwl_mac_config_interface(struct ieee80211_hw *hw, /* If there is currently a HW scan going on in the background * then we need to cancel it else the RXON below will fail. */ if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress " + IWL_WARN(priv, "Aborted scan still in progress " "after 100ms\n"); IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); mutex_unlock(&priv->mutex); @@ -3019,13 +3104,15 @@ static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw, } static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, struct ieee80211_key_conf *key) { struct iwl_priv *priv = hw->priv; - int ret = 0; - u8 sta_id = IWL_INVALID_STATION; - u8 is_default_wep_key = 0; + const u8 *addr; + int ret; + u8 sta_id; + bool is_default_wep_key = false; IWL_DEBUG_MAC80211("enter\n"); @@ -3033,11 +3120,7 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); return -EOPNOTSUPP; } - - if (is_zero_ether_addr(addr)) - /* only support pairwise keys */ - return -EOPNOTSUPP; - + addr = sta ? sta->addr : iwl_bcast_addr; sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211("leave - %pM not in station map.\n", @@ -3359,8 +3442,7 @@ static ssize_t store_debug_level(struct device *d, ret = strict_strtoul(buf, 0, &val); if (ret) - printk(KERN_INFO DRV_NAME - ": %s is not in hex or decimal form.\n", buf); + IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); else priv->debug_level = val; @@ -3439,8 +3521,7 @@ static ssize_t store_tx_power(struct device *d, ret = strict_strtoul(buf, 10, &val); if (ret) - printk(KERN_INFO DRV_NAME - ": %s is not in decimal form.\n", buf); + IWL_INFO(priv, "%s is not in decimal form.\n", buf); else iwl_set_tx_power(priv, val, false); @@ -3473,7 +3554,7 @@ static ssize_t store_flags(struct device *d, if (le32_to_cpu(priv->staging_rxon.flags) != flags) { /* Cancel any currently running scans... */ if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); + IWL_WARN(priv, "Could not cancel scan.\n"); else { IWL_DEBUG_INFO("Commit rxon.flags = 0x%04X\n", flags); priv->staging_rxon.flags = cpu_to_le32(flags); @@ -3512,7 +3593,7 @@ static ssize_t store_filter_flags(struct device *d, if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { /* Cancel any currently running scans... */ if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); + IWL_WARN(priv, "Could not cancel scan.\n"); else { IWL_DEBUG_INFO("Committing rxon.filter_flags = " "0x%04X\n", filter_flags); @@ -3529,31 +3610,6 @@ static ssize_t store_filter_flags(struct device *d, static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, store_filter_flags); -static ssize_t store_retry_rate(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - long val; - int ret = strict_strtol(buf, 10, &val); - if (!ret) - return ret; - - priv->retry_rate = (val > 0) ? val : 1; - - return count; -} - -static ssize_t show_retry_rate(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d", priv->retry_rate); -} - -static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, - store_retry_rate); - static ssize_t store_power_level(struct device *d, struct device_attribute *attr, const char *buf, size_t count) @@ -3656,16 +3712,6 @@ static ssize_t show_statistics(struct device *d, static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); -static ssize_t show_status(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - if (!iwl_is_alive(priv)) - return -EAGAIN; - return sprintf(buf, "0x%08x\n", (int)priv->status); -} - -static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); /***************************************************************************** * @@ -3719,9 +3765,7 @@ static struct attribute *iwl_sysfs_entries[] = { &dev_attr_flags.attr, &dev_attr_filter_flags.attr, &dev_attr_power_level.attr, - &dev_attr_retry_rate.attr, &dev_attr_statistics.attr, - &dev_attr_status.attr, &dev_attr_temperature.attr, &dev_attr_tx_power.attr, #ifdef CONFIG_IWLWIFI_DEBUG @@ -3764,6 +3808,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct ieee80211_hw *hw; struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); unsigned long flags; + u16 pci_cmd; /************************ * 1. Allocating HW data @@ -3816,8 +3861,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); /* both attempts failed: */ if (err) { - printk(KERN_WARNING "%s: No suitable DMA available.\n", - DRV_NAME); + IWL_WARN(priv, "No suitable DMA available.\n"); goto out_pci_disable_device; } } @@ -3843,8 +3887,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); iwl_hw_detect(priv); - printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", + IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); /* We disable the RETRY_TIMEOUT register (0x41) to keep @@ -3863,7 +3906,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Read the EEPROM */ err = iwl_eeprom_init(priv); if (err) { - IWL_ERROR("Unable to init EEPROM\n"); + IWL_ERR(priv, "Unable to init EEPROM\n"); goto out_iounmap; } err = iwl_eeprom_check_version(priv); @@ -3879,7 +3922,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * 5. Setup HW constants ************************/ if (iwl_set_hw_params(priv)) { - IWL_ERROR("failed to set hw parameters\n"); + IWL_ERR(priv, "failed to set hw parameters\n"); goto out_free_eeprom; } @@ -3909,43 +3952,65 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) iwl_disable_interrupts(priv); spin_unlock_irqrestore(&priv->lock, flags); + pci_enable_msi(priv->pci_dev); + + err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED, + DRV_NAME, priv); + if (err) { + IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group); if (err) { - IWL_ERROR("failed to create sysfs device attributes\n"); + IWL_ERR(priv, "failed to create sysfs device attributes\n"); goto out_uninit_drv; } - iwl_setup_deferred_work(priv); iwl_setup_rx_handlers(priv); - /******************** - * 9. Conclude - ********************/ - pci_save_state(pdev); - pci_disable_device(pdev); - /********************************** - * 10. Setup and register mac80211 + * 9. Setup and register mac80211 **********************************/ + /* enable interrupts if needed: hw bug w/a */ + pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); + } + + iwl_enable_interrupts(priv); + err = iwl_setup_mac(priv); if (err) goto out_remove_sysfs; err = iwl_dbgfs_register(priv, DRV_NAME); if (err) - IWL_ERROR("failed to create debugfs files\n"); + IWL_ERR(priv, "failed to create debugfs files\n"); + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else + set_bit(STATUS_RF_KILL_HW, &priv->status); err = iwl_rfkill_init(priv); if (err) - IWL_ERROR("Unable to initialize RFKILL system. " + IWL_ERR(priv, "Unable to initialize RFKILL system. " "Ignoring error: %d\n", err); + else + iwl_rfkill_set_hw_state(priv); + iwl_power_initialize(priv); return 0; out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); + out_disable_msi: + pci_disable_msi(priv->pci_dev); + pci_disable_device(priv->pci_dev); out_uninit_drv: iwl_uninit_drv(priv); out_free_eeprom: @@ -4017,6 +4082,8 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) destroy_workqueue(priv->workqueue); priv->workqueue = NULL; + free_irq(priv->pci_dev->irq, priv); + pci_disable_msi(priv->pci_dev); pci_iounmap(pdev, priv->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); @@ -4042,6 +4109,8 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) priv->is_open = 1; } + pci_save_state(pdev); + pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; @@ -4052,6 +4121,9 @@ static int iwl_pci_resume(struct pci_dev *pdev) struct iwl_priv *priv = pci_get_drvdata(pdev); pci_set_power_state(pdev, PCI_D0); + pci_enable_device(pdev); + pci_restore_state(pdev); + iwl_enable_interrupts(priv); if (priv->is_open) iwl_mac_start(priv->hw); @@ -4092,6 +4164,21 @@ static struct pci_device_id iwl_hw_card_ids[] = { /* 5150 Wifi/WiMax */ {IWL_PCI_DEVICE(0x423C, PCI_ANY_ID, iwl5150_agn_cfg)}, {IWL_PCI_DEVICE(0x423D, PCI_ANY_ID, iwl5150_agn_cfg)}, +/* 6000/6050 Series */ + {IWL_PCI_DEVICE(0x0082, 0x1102, iwl6000_2ag_cfg)}, + {IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)}, + {IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)}, + {IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)}, + {IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)}, + {IWL_PCI_DEVICE(0x0087, PCI_ANY_ID, iwl6050_2agn_cfg)}, + {IWL_PCI_DEVICE(0x0088, PCI_ANY_ID, iwl6050_3agn_cfg)}, + {IWL_PCI_DEVICE(0x0089, PCI_ANY_ID, iwl6050_2agn_cfg)}, +/* 100 Series WiFi */ + {IWL_PCI_DEVICE(0x0083, PCI_ANY_ID, iwl100_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0084, PCI_ANY_ID, iwl100_bgn_cfg)}, #endif /* CONFIG_IWL5000 */ {0} @@ -4118,13 +4205,14 @@ static int __init iwl_init(void) ret = iwlagn_rate_control_register(); if (ret) { - IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); + printk(KERN_ERR DRV_NAME + "Unable to register rate control algorithm: %d\n", ret); return ret; } ret = pci_register_driver(&iwl_driver); if (ret) { - IWL_ERROR("Unable to initialize PCI module\n"); + printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n"); goto error_register; } |