diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-commands.h | 72 |
1 files changed, 33 insertions, 39 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index fb6f5ffb9f1..920dfc1b2db 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -126,6 +126,7 @@ enum { /* Miscellaneous commands */ QUIET_NOTIFICATION = 0x96, /* not used */ REPLY_TX_PWR_TABLE_CMD = 0x97, + REPLY_TX_POWER_DBM_CMD = 0x98, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ /* Bluetooth device coexistance config command */ @@ -280,16 +281,7 @@ struct iwl_cmd_header { #define RATE_MCS_ANT_C_MSK 0x10000 #define RATE_MCS_ANT_ABC_MSK 0x1C000 - -/** - * struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD - * - * Scan uses only one transmitter, so only one analog/dsp gain pair is needed. - */ -struct iwl4965_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); +#define RATE_MCS_ANT_INIT_IND 1 #define POWER_TABLE_NUM_ENTRIES 33 #define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 @@ -339,6 +331,17 @@ struct iwl4965_tx_power_db { struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; } __attribute__ ((packed)); +/** + * Commad REPLY_TX_POWER_DBM_CMD = 0x98 + * struct iwl5000_tx_power_dbm_cmd + */ +#define IWL50_TX_POWER_AUTO 0x7f +struct iwl5000_tx_power_dbm_cmd { + s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 flags; + s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 reserved; +} __attribute__ ((packed)); /****************************************************************************** * (0a) @@ -990,6 +993,7 @@ struct iwl_wep_cmd { #define WEP_KEY_WEP_TYPE 1 #define WEP_KEYS_MAX 4 #define WEP_INVALID_OFFSET 0xff +#define WEP_KEY_LEN_64 5 #define WEP_KEY_LEN_128 13 /****************************************************************************** @@ -1481,21 +1485,10 @@ struct iwl4965_tx_resp { * table entry used for all frames in the new agg. * 31-16: Sequence # for this frame's Tx cmd (not SSN!) */ - __le32 status; /* TX status (for aggregation status of 1st frame) */ -} __attribute__ ((packed)); - -struct iwl4965_tx_resp_agg { - u8 frame_count; /* 1 no aggregation, >1 aggregation */ - u8 reserved1; - u8 failure_rts; - u8 failure_frame; - __le32 rate_n_flags; - __le16 wireless_media_time; - __le16 reserved3; - __le32 pa_power1; - __le32 pa_power2; - struct agg_tx_status status; /* TX status (for aggregation status */ - /* of 1st frame) */ + union { + __le32 status; + struct agg_tx_status agg_status[0]; /* for each agg frame */ + } u; } __attribute__ ((packed)); struct iwl5000_tx_resp { @@ -2085,7 +2078,7 @@ struct iwl4965_card_state_notif { #define RF_CARD_DISABLED 0x04 #define RXON_CARD_DISABLED 0x10 -struct iwl4965_ct_kill_config { +struct iwl_ct_kill_config { __le32 reserved; __le32 critical_temperature_M; __le32 critical_temperature_R; @@ -2098,7 +2091,7 @@ struct iwl4965_ct_kill_config { *****************************************************************************/ /** - * struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table + * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table * * One for each channel in the scan list. * Each channel can independently select: @@ -2108,7 +2101,7 @@ struct iwl4965_ct_kill_config { * quiet_plcp_th, good_CRC_th) * * To avoid uCode errors, make sure the following are true (see comments - * under struct iwl4965_scan_cmd about max_out_time and quiet_time): + * under struct iwl_scan_cmd about max_out_time and quiet_time): * 1) If using passive_dwell (i.e. passive_dwell != 0): * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) * 2) quiet_time <= active_dwell @@ -2116,7 +2109,7 @@ struct iwl4965_ct_kill_config { * passive_dwell < max_out_time * active_dwell < max_out_time */ -struct iwl4965_scan_channel { +struct iwl_scan_channel { /* * type is defined as: * 0:0 1 = active, 0 = passive @@ -2126,19 +2119,20 @@ struct iwl4965_scan_channel { */ u8 type; u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */ - struct iwl4965_tx_power tpc; + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ } __attribute__ ((packed)); /** - * struct iwl4965_ssid_ie - directed scan network information element + * struct iwl_ssid_ie - directed scan network information element * * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field * in struct iwl4965_scan_channel; each channel may select different ssids from * among the 4 entries. SSID IEs get transmitted in reverse order of entry. */ -struct iwl4965_ssid_ie { +struct iwl_ssid_ie { u8 id; u8 len; u8 ssid[32]; @@ -2199,9 +2193,9 @@ struct iwl4965_ssid_ie { * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. * * To avoid uCode errors, see timing restrictions described under - * struct iwl4965_scan_channel. + * struct iwl_scan_channel. */ -struct iwl4965_scan_cmd { +struct iwl_scan_cmd { __le16 len; u8 reserved0; u8 channel_count; /* # channels in channel list */ @@ -2225,7 +2219,7 @@ struct iwl4965_scan_cmd { struct iwl_tx_cmd tx_cmd; /* For directed active scans (set to all-0s otherwise) */ - struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX]; + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; /* * Probe request frame, followed by channel list. @@ -2253,14 +2247,14 @@ struct iwl4965_scan_cmd { /* * REPLY_SCAN_CMD = 0x80 (response) */ -struct iwl4965_scanreq_notification { +struct iwl_scanreq_notification { __le32 status; /* 1: okay, 2: cannot fulfill request */ } __attribute__ ((packed)); /* * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) */ -struct iwl4965_scanstart_notification { +struct iwl_scanstart_notification { __le32 tsf_low; __le32 tsf_high; __le32 beacon_timer; @@ -2277,7 +2271,7 @@ struct iwl4965_scanstart_notification { /* * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) */ -struct iwl4965_scanresults_notification { +struct iwl_scanresults_notification { u8 channel; u8 band; u8 reserved[2]; @@ -2289,7 +2283,7 @@ struct iwl4965_scanresults_notification { /* * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) */ -struct iwl4965_scancomplete_notification { +struct iwl_scancomplete_notification { u8 scanned_channels; u8 status; u8 reserved; |