diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 152 |
1 files changed, 4 insertions, 148 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e93ddb74457..f9d16ca5b3d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -36,7 +36,6 @@ #include "iwl-debug.h" #include "iwl-core.h" #include "iwl-io.h" -#include "iwl-rfkill.h" #include "iwl-power.h" #include "iwl-sta.h" #include "iwl-helpers.h" @@ -1389,7 +1388,7 @@ int iwl_init_drv(struct iwl_priv *priv) mutex_init(&priv->mutex); /* Clear the driver's (not device's) station table */ - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); priv->data_retry_limit = -1; priv->ieee_channels = NULL; @@ -1704,8 +1703,9 @@ static irqreturn_t iwl_isr(int irq, void *data) { struct iwl_priv *priv = data; u32 inta, inta_mask; +#ifdef CONFIG_IWLWIFI_DEBUG u32 inta_fh; - +#endif if (!priv) return IRQ_NONE; @@ -2210,126 +2210,6 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) } EXPORT_SYMBOL(iwl_send_card_state); -void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv) -{ - unsigned long flags; - - if (test_bit(STATUS_RF_KILL_SW, &priv->status)) - return; - - IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO OFF\n"); - - iwl_scan_cancel(priv); - /* FIXME: This is a workaround for AP */ - if (priv->iw_mode != NL80211_IFTYPE_AP) { - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_SW_BIT_RFKILL); - spin_unlock_irqrestore(&priv->lock, flags); - /* call the host command only if no hw rf-kill set */ - if (!test_bit(STATUS_RF_KILL_HW, &priv->status) && - iwl_is_ready(priv)) - iwl_send_card_state(priv, - CARD_STATE_CMD_DISABLE, 0); - set_bit(STATUS_RF_KILL_SW, &priv->status); - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - } -} -EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio); - -int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv) -{ - unsigned long flags; - - if (!test_bit(STATUS_RF_KILL_SW, &priv->status)) - return 0; - - IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO ON\n"); - - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* If the driver is up it will receive CARD_STATE_NOTIFICATION - * notification where it will clear SW rfkill status. - * Setting it here would break the handler. Only if the - * interface is down we can set here since we don't - * receive any further notification. - */ - if (!priv->is_open) - clear_bit(STATUS_RF_KILL_SW, &priv->status); - spin_unlock_irqrestore(&priv->lock, flags); - - /* wake up ucode */ - msleep(10); - - iwl_read32(priv, CSR_UCODE_DRV_GP1); - spin_lock_irqsave(&priv->reg_lock, flags); - if (!iwl_grab_nic_access(priv)) - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->reg_lock, flags); - - if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { - IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - " - "disabled by HW switch\n"); - return 0; - } - - /* when driver is up while rfkill is on, it wont receive - * any CARD_STATE_NOTIFICATION notifications so we have to - * restart it in here - */ - if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) { - clear_bit(STATUS_RF_KILL_SW, &priv->status); - if (!iwl_is_rfkill(priv)) - queue_work(priv->workqueue, &priv->up); - } - - /* If the driver is already loaded, it will receive - * CARD_STATE_NOTIFICATION notifications and the handler will - * call restart to reload the driver. - */ - return 1; -} -EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio); - -void iwl_bg_rf_kill(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill); - - wake_up_interruptible(&priv->wait_command_queue); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - - if (!iwl_is_rfkill(priv)) { - IWL_DEBUG_RF_KILL(priv, - "HW and/or SW RF Kill no longer active, restarting " - "device\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status) && - priv->is_open) - queue_work(priv->workqueue, &priv->restart); - } else { - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) - IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - " - "disabled by SW switch\n"); - else - IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n" - "Kill switch must be turned off for " - "wireless networking to work.\n"); - } - mutex_unlock(&priv->mutex); - iwl_rfkill_set_hw_state(priv); -} -EXPORT_SYMBOL(iwl_bg_rf_kill); - void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { @@ -2679,19 +2559,12 @@ int iwl_set_mode(struct iwl_priv *priv, int mode) memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* dont commit rxon if rf-kill is on*/ if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwlcore_commit_rxon(priv); return 0; @@ -2855,23 +2728,6 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) if (priv->cfg->ops->hcmd->set_rxon_chain) priv->cfg->ops->hcmd->set_rxon_chain(priv); - if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { - if (conf->radio_enabled && - iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " - "waiting for uCode\n"); - goto out; - } - - if (!conf->radio_enabled) - iwl_radio_kill_sw_disable_radio(priv); - } - - if (!conf->radio_enabled) { - IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); - goto out; - } - if (!iwl_is_ready(priv)) { IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); goto out; |