diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl4965-base.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl4965-base.c | 152 |
1 files changed, 2 insertions, 150 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index a607b39223e..499705ff888 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -613,36 +613,6 @@ static void iwl4965_activate_qos(struct iwl_priv *priv, u8 force) } } -int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr2, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our IBSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr3, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr3, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our BSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr2, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - default: - break; - } - - return 1; -} - static void iwl4965_sequence_reset(struct iwl_priv *priv) { /* Reset ieee stats */ @@ -906,72 +876,6 @@ static void iwl4965_set_rate(struct iwl_priv *priv) (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; } -#define IWL_PACKET_RETRY_TIME HZ - -int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) -{ - u16 sc = le16_to_cpu(header->seq_ctrl); - u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4; - u16 frag = sc & IEEE80211_SCTL_FRAG; - u16 *last_seq, *last_frag; - unsigned long *last_time; - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS:{ - struct list_head *p; - struct iwl4965_ibss_seq *entry = NULL; - u8 *mac = header->addr2; - int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1); - - __list_for_each(p, &priv->ibss_mac_hash[index]) { - entry = list_entry(p, struct iwl4965_ibss_seq, list); - if (!compare_ether_addr(entry->mac, mac)) - break; - } - if (p == &priv->ibss_mac_hash[index]) { - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - if (!entry) { - IWL_ERROR("Cannot malloc new mac entry\n"); - return 0; - } - memcpy(entry->mac, mac, ETH_ALEN); - entry->seq_num = seq; - entry->frag_num = frag; - entry->packet_time = jiffies; - list_add(&entry->list, &priv->ibss_mac_hash[index]); - return 0; - } - last_seq = &entry->seq_num; - last_frag = &entry->frag_num; - last_time = &entry->packet_time; - break; - } - case IEEE80211_IF_TYPE_STA: - last_seq = &priv->last_seq_num; - last_frag = &priv->last_frag_num; - last_time = &priv->last_packet_time; - break; - default: - return 0; - } - if ((*last_seq == seq) && - time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) { - if (*last_frag == frag) - goto drop; - if (*last_frag + 1 != frag) - /* out-of-order fragment */ - goto drop; - } else - *last_seq = seq; - - *last_frag = frag; - *last_time = jiffies; - return 0; - - drop: - return 1; -} - #ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT #include "iwl-spectrum.h" @@ -1350,17 +1254,6 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, wake_up_interruptible(&priv->wait_command_queue); } -/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). - * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ -static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - priv->last_phy_res[0] = 1; - memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), - sizeof(struct iwl4965_rx_phy_res)); -} - /** * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks * @@ -1398,8 +1291,8 @@ static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = iwl_rx_missed_beacon_notif; /* Rx handlers */ - priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy; - priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx; + priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy; + priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx; /* Set up hardware specific Rx handlers */ priv->cfg->ops->lib->rx_handler_setup(priv); } @@ -1530,47 +1423,6 @@ void iwl_rx_handle(struct iwl_priv *priv) iwl_rx_queue_restock(priv); } -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - #ifdef CONFIG_IWLWIFI_DEBUG static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv) { |