aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rtl818x
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rtl818x')
-rw-r--r--drivers/net/wireless/rtl818x/Makefile2
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180_dev.c16
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187.h1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_dev.c47
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_leds.c14
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_rfkill.c63
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_rfkill.h8
-rw-r--r--drivers/net/wireless/rtl818x/rtl818x.h19
8 files changed, 137 insertions, 33 deletions
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
index 37e3d4db0c4..93cbfbedb46 100644
--- a/drivers/net/wireless/rtl818x/Makefile
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -1,5 +1,5 @@
rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
-rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o
+rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o rtl8187_rfkill.o
obj-$(CONFIG_RTL8180) += rtl8180.o
obj-$(CONFIG_RTL8187) += rtl8187.o
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 7e65d7c3180..16429c49139 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -143,7 +143,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
@@ -280,7 +281,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
(ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
remainder = (16 * (skb->len + 4)) %
((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
- if (remainder > 0 && remainder <= 6)
+ if (remainder <= 6)
plcp_len |= 1 << 15;
}
@@ -727,10 +728,16 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
priv->rf->conf_erp(dev, info);
}
+static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ return mc_count;
+}
+
static void rtl8180_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mclist)
+ u64 multicast)
{
struct rtl8180_priv *priv = dev->priv;
@@ -740,7 +747,7 @@ static void rtl8180_configure_filter(struct ieee80211_hw *dev,
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
- if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+ if (*total_flags & FIF_ALLMULTI || multicast > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
else
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
@@ -767,6 +774,7 @@ static const struct ieee80211_ops rtl8180_ops = {
.remove_interface = rtl8180_remove_interface,
.config = rtl8180_config,
.bss_info_changed = rtl8180_bss_info_changed,
+ .prepare_multicast = rtl8180_prepare_multicast,
.configure_filter = rtl8180_configure_filter,
};
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index c09bfefc70f..bf9175a8c1f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -133,6 +133,7 @@ struct rtl8187_priv {
__le16 bits16;
__le32 bits32;
} *io_dmabuf;
+ bool rfkill_off;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 87a95588a8e..2017ccc0014 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -32,6 +32,7 @@
#ifdef CONFIG_RTL8187_LEDS
#include "rtl8187_leds.h"
#endif
+#include "rtl8187_rfkill.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -220,7 +221,7 @@ static void rtl8187_tx_cb(struct urb *urb)
* reading a register in the device. We are in interrupt mode
* here, thus queue the skb and finish on a work queue. */
skb_queue_tail(&priv->b_tx_status.queue, skb);
- queue_delayed_work(hw->workqueue, &priv->work, 0);
+ ieee80211_queue_delayed_work(hw, &priv->work, 0);
}
}
@@ -380,7 +381,8 @@ static void rtl8187_rx_cb(struct urb *urb)
rx_status.flag |= RX_FLAG_TSFT;
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
skb = dev_alloc_skb(RTL8187_MAX_RX);
if (unlikely(!skb)) {
@@ -647,10 +649,10 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
/* setup card */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
- rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -673,11 +675,11 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
/* host_usb_init */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
@@ -909,12 +911,12 @@ static int rtl8187_start(struct ieee80211_hw *dev)
u32 reg;
int ret;
+ mutex_lock(&priv->conf_mutex);
+
ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
rtl8187b_init_hw(dev);
if (ret)
- return ret;
-
- mutex_lock(&priv->conf_mutex);
+ goto rtl8187_start_exit;
init_usb_anchor(&priv->anchored);
priv->dev = dev;
@@ -941,8 +943,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
(7 << 21 /* MAX TX DMA */));
rtl8187_init_urbs(dev);
rtl8187b_init_status_urb(dev);
- mutex_unlock(&priv->conf_mutex);
- return 0;
+ goto rtl8187_start_exit;
}
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
@@ -986,9 +987,10 @@ static int rtl8187_start(struct ieee80211_hw *dev)
reg |= RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
INIT_DELAYED_WORK(&priv->work, rtl8187_work);
- mutex_unlock(&priv->conf_mutex);
- return 0;
+rtl8187_start_exit:
+ mutex_unlock(&priv->conf_mutex);
+ return ret;
}
static void rtl8187_stop(struct ieee80211_hw *dev)
@@ -1016,9 +1018,10 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
dev_kfree_skb_any(skb);
usb_kill_anchored_urbs(&priv->anchored);
+ mutex_unlock(&priv->conf_mutex);
+
if (!priv->is_rtl8187b)
cancel_delayed_work_sync(&priv->work);
- mutex_unlock(&priv->conf_mutex);
}
static int rtl8187_add_interface(struct ieee80211_hw *dev,
@@ -1197,10 +1200,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
info->use_short_preamble);
}
+static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
+ int mc_count, struct dev_addr_list *mc_list)
+{
+ return mc_count;
+}
+
static void rtl8187_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mclist)
+ u64 multicast)
{
struct rtl8187_priv *priv = dev->priv;
@@ -1210,7 +1219,7 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev,
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
- if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+ if (*total_flags & FIF_ALLMULTI || multicast > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
else
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
@@ -1273,8 +1282,10 @@ static const struct ieee80211_ops rtl8187_ops = {
.remove_interface = rtl8187_remove_interface,
.config = rtl8187_config,
.bss_info_changed = rtl8187_bss_info_changed,
+ .prepare_multicast = rtl8187_prepare_multicast,
.configure_filter = rtl8187_configure_filter,
- .conf_tx = rtl8187_conf_tx
+ .conf_tx = rtl8187_conf_tx,
+ .rfkill_poll = rtl8187_rfkill_poll
};
static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
@@ -1514,6 +1525,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
reg &= 0xFF;
rtl8187_leds_init(dev, reg);
#endif
+ rtl8187_rfkill_init(dev);
return 0;
@@ -1537,6 +1549,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
#ifdef CONFIG_RTL8187_LEDS
rtl8187_leds_exit(dev);
#endif
+ rtl8187_rfkill_exit(dev);
ieee80211_unregister_hw(dev);
priv = dev->priv;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index cf9f899fe0e..a1c670fc155 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -42,7 +42,7 @@ static void led_turn_on(struct work_struct *work)
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
break;
case LED_PIN_LED0:
@@ -80,7 +80,7 @@ static void led_turn_off(struct work_struct *work)
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
break;
case LED_PIN_LED0:
@@ -108,11 +108,11 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
struct rtl8187_priv *priv = hw->priv;
if (brightness == LED_OFF) {
- queue_delayed_work(hw->workqueue, &priv->led_off, 0);
+ ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
/* The LED is off for 1/20 sec so that it just blinks. */
- queue_delayed_work(hw->workqueue, &priv->led_on, HZ / 20);
+ ieee80211_queue_delayed_work(hw, &priv->led_on, HZ / 20);
} else
- queue_delayed_work(hw->workqueue, &priv->led_on, 0);
+ ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
}
static int rtl8187_register_led(struct ieee80211_hw *dev,
@@ -193,7 +193,7 @@ void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
err = rtl8187_register_led(dev, &priv->led_rx, name,
ieee80211_get_rx_led_name(dev), ledpin);
if (!err) {
- queue_delayed_work(dev->workqueue, &priv->led_on, 0);
+ ieee80211_queue_delayed_work(dev, &priv->led_on, 0);
return;
}
/* registration of RX LED failed - unregister TX */
@@ -209,7 +209,7 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
struct rtl8187_priv *priv = dev->priv;
/* turn the LED off before exiting */
- queue_delayed_work(dev->workqueue, &priv->led_off, 0);
+ ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
cancel_delayed_work_sync(&priv->led_off);
cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
new file mode 100644
index 00000000000..9fab13e4004
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -0,0 +1,63 @@
+/*
+ * Linux RFKILL support for RTL8187
+ *
+ * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * Based on the RFKILL handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+
+static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
+{
+ u8 gpio;
+
+ gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02);
+ gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
+
+ return gpio & 0x02;
+}
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw)
+{
+ struct rtl8187_priv *priv = hw->priv;
+
+ priv->rfkill_off = rtl8187_is_radio_enabled(priv);
+ printk(KERN_INFO "rtl8187: wireless switch is %s\n",
+ priv->rfkill_off ? "on" : "off");
+ wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
+ wiphy_rfkill_start_polling(hw->wiphy);
+}
+
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw)
+{
+ bool enabled;
+ struct rtl8187_priv *priv = hw->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ enabled = rtl8187_is_radio_enabled(priv);
+ if (unlikely(enabled != priv->rfkill_off)) {
+ priv->rfkill_off = enabled;
+ printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
+ enabled ? "on" : "off");
+ wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+ }
+ mutex_unlock(&priv->conf_mutex);
+}
+
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw)
+{
+ wiphy_rfkill_stop_polling(hw->wiphy);
+}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.h b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h
new file mode 100644
index 00000000000..e12575e96d1
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h
@@ -0,0 +1,8 @@
+#ifndef RTL8187_RFKILL_H
+#define RTL8187_RFKILL_H
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw);
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw);
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw);
+
+#endif /* RTL8187_RFKILL_H */
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index 34a5555cc19..8522490d2e2 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -138,8 +138,9 @@ struct rtl818x_csr {
__le32 RF_PARA;
__le32 RF_TIMING;
u8 GP_ENABLE;
- u8 GPIO;
- u8 reserved_12[2];
+ u8 GPIO0;
+ u8 GPIO1;
+ u8 reserved_12;
__le32 HSSI_PARA;
u8 reserved_13[4];
u8 TX_AGC_CTL;
@@ -194,8 +195,18 @@ struct rtl818x_rf_ops {
void (*conf_erp)(struct ieee80211_hw *, struct ieee80211_bss_conf *);
};
-/* Tx/Rx flags are common between RTL818X chips */
-
+/**
+ * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips
+ *
+ * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption.
+ * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed.
+ * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble.
+ * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow.
+ * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection.
+ * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection.
+ * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame.
+ * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame.
+ */
enum rtl818x_tx_desc_flags {
RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15),
RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15),
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 17:00:04 +0000