aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/wl1251.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1251.c')
-rw-r--r--drivers/net/wireless/wl12xx/wl1251.c709
1 files changed, 0 insertions, 709 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
deleted file mode 100644
index ce1561a41fa..00000000000
--- a/drivers/net/wireless/wl12xx/wl1251.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "wl1251.h"
-#include "reg.h"
-#include "spi.h"
-#include "boot.h"
-#include "event.h"
-#include "acx.h"
-#include "tx.h"
-#include "rx.h"
-#include "ps.h"
-#include "init.h"
-
-static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
- [PART_DOWN] = {
- .mem = {
- .start = 0x00000000,
- .size = 0x00016800
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = REGISTERS_DOWN_SIZE
- },
- },
-
- [PART_WORK] = {
- .mem = {
- .start = 0x00028000,
- .size = 0x00014000
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = REGISTERS_WORK_SIZE
- },
- },
-
- /* WL1251 doesn't use the DRPW partition, so we don't set it here */
-};
-
-static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
- [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
- [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
- [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
- [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
- [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
- [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
- [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
- [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
- [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
- [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
- [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
-};
-
-static int wl1251_upload_firmware(struct wl12xx *wl)
-{
- struct wl12xx_partition_set *p_table = wl->chip.p_table;
- int addr, chunk_num, partition_limit;
- size_t fw_data_len;
- u8 *p;
-
- /* whal_FwCtrl_LoadFwImageSm() */
-
- wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
- wl12xx_reg_read32(wl, CHIP_ID_B));
-
- /* 10.0 check firmware length and set partition */
- fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) |
- (wl->fw[6] << 8) | (wl->fw[7]);
-
- wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
- CHUNK_SIZE);
-
- if ((fw_data_len % 4) != 0) {
- wl12xx_error("firmware length not multiple of four");
- return -EIO;
- }
-
- wl12xx_set_partition(wl,
- p_table[PART_DOWN].mem.start,
- p_table[PART_DOWN].mem.size,
- p_table[PART_DOWN].reg.start,
- p_table[PART_DOWN].reg.size);
-
- /* 10.1 set partition limit and chunk num */
- chunk_num = 0;
- partition_limit = p_table[PART_DOWN].mem.size;
-
- while (chunk_num < fw_data_len / CHUNK_SIZE) {
- /* 10.2 update partition, if needed */
- addr = p_table[PART_DOWN].mem.start +
- (chunk_num + 2) * CHUNK_SIZE;
- if (addr > partition_limit) {
- addr = p_table[PART_DOWN].mem.start +
- chunk_num * CHUNK_SIZE;
- partition_limit = chunk_num * CHUNK_SIZE +
- p_table[PART_DOWN].mem.size;
- wl12xx_set_partition(wl,
- addr,
- p_table[PART_DOWN].mem.size,
- p_table[PART_DOWN].reg.start,
- p_table[PART_DOWN].reg.size);
- }
-
- /* 10.3 upload the chunk */
- addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
- p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
- wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
- p, addr);
- wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
-
- chunk_num++;
- }
-
- /* 10.4 upload the last chunk */
- addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
- p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
- wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
- fw_data_len % CHUNK_SIZE, p, addr);
- wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
-
- return 0;
-}
-
-static int wl1251_upload_nvs(struct wl12xx *wl)
-{
- size_t nvs_len, nvs_bytes_written, burst_len;
- int nvs_start, i;
- u32 dest_addr, val;
- u8 *nvs_ptr, *nvs;
-
- nvs = wl->nvs;
- if (nvs == NULL)
- return -ENODEV;
-
- nvs_ptr = nvs;
-
- nvs_len = wl->nvs_len;
- nvs_start = wl->fw_len;
-
- /*
- * Layout before the actual NVS tables:
- * 1 byte : burst length.
- * 2 bytes: destination address.
- * n bytes: data to burst copy.
- *
- * This is ended by a 0 length, then the NVS tables.
- */
-
- while (nvs_ptr[0]) {
- burst_len = nvs_ptr[0];
- dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
-
- /* We move our pointer to the data */
- nvs_ptr += 3;
-
- for (i = 0; i < burst_len; i++) {
- val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
- | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
- wl12xx_debug(DEBUG_BOOT,
- "nvs burst write 0x%x: 0x%x",
- dest_addr, val);
- wl12xx_mem_write32(wl, dest_addr, val);
-
- nvs_ptr += 4;
- dest_addr += 4;
- }
- }
-
- /*
- * We've reached the first zero length, the first NVS table
- * is 7 bytes further.
- */
- nvs_ptr += 7;
- nvs_len -= nvs_ptr - nvs;
- nvs_len = ALIGN(nvs_len, 4);
-
- /* Now we must set the partition correctly */
- wl12xx_set_partition(wl, nvs_start,
- wl->chip.p_table[PART_DOWN].mem.size,
- wl->chip.p_table[PART_DOWN].reg.start,
- wl->chip.p_table[PART_DOWN].reg.size);
-
- /* And finally we upload the NVS tables */
- nvs_bytes_written = 0;
- while (nvs_bytes_written < nvs_len) {
- val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
- | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
- val = cpu_to_le32(val);
-
- wl12xx_debug(DEBUG_BOOT,
- "nvs write table 0x%x: 0x%x",
- nvs_start, val);
- wl12xx_mem_write32(wl, nvs_start, val);
-
- nvs_ptr += 4;
- nvs_bytes_written += 4;
- nvs_start += 4;
- }
-
- return 0;
-}
-
-static int wl1251_boot(struct wl12xx *wl)
-{
- int ret = 0, minor_minor_e2_ver;
- u32 tmp, boot_data;
-
- ret = wl12xx_boot_soft_reset(wl);
- if (ret < 0)
- goto out;
-
- /* 2. start processing NVS file */
- ret = wl->chip.op_upload_nvs(wl);
- if (ret < 0)
- goto out;
-
- /* write firmware's last address (ie. it's length) to
- * ACX_EEPROMLESS_IND_REG */
- wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
-
- /* 6. read the EEPROM parameters */
- tmp = wl12xx_reg_read32(wl, SCR_PAD2);
-
- /* 7. read bootdata */
- wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
- wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
- tmp = wl12xx_reg_read32(wl, SCR_PAD3);
-
- /* 8. check bootdata and call restart sequence */
- wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
- minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
-
- wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
- "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
- wl->boot_attr.radio_type, wl->boot_attr.major,
- wl->boot_attr.minor, minor_minor_e2_ver);
-
- ret = wl12xx_boot_init_seq(wl);
- if (ret < 0)
- goto out;
-
- /* 9. NVS processing done */
- boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
- wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
-
- /* 10. check that ECPU_CONTROL_HALT bits are set in
- * pWhalBus->uBootData and start uploading firmware
- */
- if ((boot_data & ECPU_CONTROL_HALT) == 0) {
- wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
- ret = -EIO;
- goto out;
- }
-
- ret = wl->chip.op_upload_fw(wl);
- if (ret < 0)
- goto out;
-
- /* 10.5 start firmware */
- ret = wl12xx_boot_run_firmware(wl);
- if (ret < 0)
- goto out;
-
- /* Get and save the firmware version */
- wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
-
-out:
- return ret;
-}
-
-static int wl1251_mem_cfg(struct wl12xx *wl)
-{
- struct wl1251_acx_config_memory mem_conf;
- int ret, i;
-
- wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
-
- /* memory config */
- mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
- mem_conf.mem_config.rx_mem_block_num = 35;
- mem_conf.mem_config.tx_min_mem_block_num = 64;
- mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
- mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
- mem_conf.mem_config.num_ssid_profiles = 1;
- mem_conf.mem_config.debug_buffer_size =
- cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
-
- /* RX queue config */
- mem_conf.rx_queue_config.dma_address = 0;
- mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
- mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
- mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
-
- /* TX queue config */
- for (i = 0; i < MAX_TX_QUEUES; i++) {
- mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
- mem_conf.tx_queue_config[i].attributes = i;
- }
-
- mem_conf.header.id = ACX_MEM_CFG;
- mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
- sizeof(struct acx_header);
- mem_conf.header.len -=
- (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
- sizeof(struct wl1251_acx_tx_queue_config);
-
- ret = wl12xx_cmd_configure(wl, &mem_conf,
- sizeof(struct wl1251_acx_config_memory));
- if (ret < 0)
- wl12xx_warning("wl1251 mem config failed: %d", ret);
-
- return ret;
-}
-
-static int wl1251_hw_init_mem_config(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl1251_mem_cfg(wl);
- if (ret < 0)
- return ret;
-
- wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
- GFP_KERNEL);
- if (!wl->target_mem_map) {
- wl12xx_error("couldn't allocate target memory map");
- return -ENOMEM;
- }
-
- /* we now ask for the firmware built memory map */
- ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
- sizeof(struct wl1251_acx_mem_map));
- if (ret < 0) {
- wl12xx_error("couldn't retrieve firmware memory map");
- kfree(wl->target_mem_map);
- wl->target_mem_map = NULL;
- return ret;
- }
-
- return 0;
-}
-
-static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
-{
- u32 cpu_ctrl;
-
- /* 10.5.0 run the firmware (I) */
- cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
- /* 10.5.1 run the firmware (II) */
- cpu_ctrl &= ~flag;
- wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
-}
-
-static void wl1251_target_enable_interrupts(struct wl12xx *wl)
-{
- /* Enable target's interrupts */
- wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
- WL1251_ACX_INTR_RX1_DATA |
- WL1251_ACX_INTR_TX_RESULT |
- WL1251_ACX_INTR_EVENT_A |
- WL1251_ACX_INTR_EVENT_B |
- WL1251_ACX_INTR_INIT_COMPLETE;
- wl12xx_boot_target_enable_interrupts(wl);
-}
-
-static void wl1251_irq_work(struct work_struct *work)
-{
- u32 intr;
- struct wl12xx *wl =
- container_of(work, struct wl12xx, irq_work);
-
- mutex_lock(&wl->mutex);
-
- wl12xx_debug(DEBUG_IRQ, "IRQ work");
-
- if (wl->state == WL12XX_STATE_OFF)
- goto out;
-
- wl12xx_ps_elp_wakeup(wl);
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
-
- intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
- wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
-
- if (wl->data_path) {
- wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
- &wl->rx_counter, sizeof(u32));
-
- /* We handle a frmware bug here */
- switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
- case 0:
- wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
- intr &= ~WL1251_ACX_INTR_RX0_DATA;
- intr &= ~WL1251_ACX_INTR_RX1_DATA;
- break;
- case 1:
- wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
- intr |= WL1251_ACX_INTR_RX0_DATA;
- intr &= ~WL1251_ACX_INTR_RX1_DATA;
- break;
- case 2:
- wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
- intr |= WL1251_ACX_INTR_RX0_DATA;
- intr |= WL1251_ACX_INTR_RX1_DATA;
- break;
- default:
- wl12xx_warning("RX: FW and host out of sync: %d",
- wl->rx_counter - wl->rx_handled);
- break;
- }
-
- wl->rx_handled = wl->rx_counter;
-
-
- wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
- }
-
- intr &= wl->intr_mask;
-
- if (intr == 0) {
- wl12xx_debug(DEBUG_IRQ, "INTR is 0");
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
- ~(wl->intr_mask));
-
- goto out_sleep;
- }
-
- if (intr & WL1251_ACX_INTR_RX0_DATA) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
- wl12xx_rx(wl);
- }
-
- if (intr & WL1251_ACX_INTR_RX1_DATA) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
- wl12xx_rx(wl);
- }
-
- if (intr & WL1251_ACX_INTR_TX_RESULT) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
- wl12xx_tx_complete(wl);
- }
-
- if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
- if (intr & WL1251_ACX_INTR_EVENT_A)
- wl12xx_event_handle(wl, 0);
- else
- wl12xx_event_handle(wl, 1);
- }
-
- if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
-
-out_sleep:
- wl12xx_ps_elp_sleep(wl);
-out:
- mutex_unlock(&wl->mutex);
-}
-
-static int wl1251_hw_init_txq_fill(u8 qid,
- struct acx_tx_queue_qos_config *config,
- u32 num_blocks)
-{
- config->qid = qid;
-
- switch (qid) {
- case QOS_AC_BE:
- config->high_threshold =
- (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
- break;
- case QOS_AC_BK:
- config->high_threshold =
- (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
- break;
- case QOS_AC_VI:
- config->high_threshold =
- (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
- break;
- case QOS_AC_VO:
- config->high_threshold =
- (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
- break;
- default:
- wl12xx_error("Invalid TX queue id: %d", qid);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
-{
- struct acx_tx_queue_qos_config config;
- struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
- int ret, i;
-
- wl12xx_debug(DEBUG_ACX, "acx tx queue config");
-
- config.header.id = ACX_TX_QUEUE_CFG;
- config.header.len = sizeof(struct acx_tx_queue_qos_config) -
- sizeof(struct acx_header);
-
- for (i = 0; i < MAX_NUM_OF_AC; i++) {
- ret = wl1251_hw_init_txq_fill(i, &config,
- wl_mem_map->num_tx_mem_blocks);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
-{
- int ret;
-
- /* asking for the data path parameters */
- wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
- GFP_KERNEL);
- if (!wl->data_path) {
- wl12xx_error("Couldnt allocate data path parameters");
- return -ENOMEM;
- }
-
- ret = wl12xx_acx_data_path_params(wl, wl->data_path);
- if (ret < 0) {
- kfree(wl->data_path);
- wl->data_path = NULL;
- return ret;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init(struct wl12xx *wl)
-{
- struct wl1251_acx_mem_map *wl_mem_map;
- int ret;
-
- ret = wl12xx_hw_init_hwenc_config(wl);
- if (ret < 0)
- return ret;
-
- /* Template settings */
- ret = wl12xx_hw_init_templates_config(wl);
- if (ret < 0)
- return ret;
-
- /* Default memory configuration */
- ret = wl1251_hw_init_mem_config(wl);
- if (ret < 0)
- return ret;
-
- /* Default data path configuration */
- ret = wl1251_hw_init_data_path_config(wl);
- if (ret < 0)
- goto out_free_memmap;
-
- /* RX config */
- ret = wl12xx_hw_init_rx_config(wl,
- RX_CFG_PROMISCUOUS | RX_CFG_TSF,
- RX_FILTER_OPTION_DEF);
- /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
- RX_FILTER_OPTION_FILTER_ALL); */
- if (ret < 0)
- goto out_free_data_path;
-
- /* TX queues config */
- ret = wl1251_hw_init_tx_queue_config(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* PHY layer config */
- ret = wl12xx_hw_init_phy_config(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Beacon filtering */
- ret = wl12xx_hw_init_beacon_filter(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Bluetooth WLAN coexistence */
- ret = wl12xx_hw_init_pta(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Energy detection */
- ret = wl12xx_hw_init_energy_detection(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Beacons and boradcast settings */
- ret = wl12xx_hw_init_beacon_broadcast(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Enable data path */
- ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Default power state */
- ret = wl12xx_hw_init_power_auth(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- wl_mem_map = wl->target_mem_map;
- wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
- wl_mem_map->num_tx_mem_blocks,
- wl->data_path->tx_control_addr,
- wl_mem_map->num_rx_mem_blocks,
- wl->data_path->rx_control_addr);
-
- return 0;
-
- out_free_data_path:
- kfree(wl->data_path);
-
- out_free_memmap:
- kfree(wl->target_mem_map);
-
- return ret;
-}
-
-static int wl1251_plt_init(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl1251_hw_init_mem_config(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-void wl1251_setup(struct wl12xx *wl)
-{
- /* FIXME: Is it better to use strncpy here or is this ok? */
- wl->chip.fw_filename = WL1251_FW_NAME;
- wl->chip.nvs_filename = WL1251_NVS_NAME;
-
- /* Now we know what chip we're using, so adjust the power on sleep
- * time accordingly */
- wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
-
- wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
- wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
-
- wl->chip.op_upload_nvs = wl1251_upload_nvs;
- wl->chip.op_upload_fw = wl1251_upload_firmware;
- wl->chip.op_boot = wl1251_boot;
- wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
- wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
- wl->chip.op_hw_init = wl1251_hw_init;
- wl->chip.op_plt_init = wl1251_plt_init;
-
- wl->chip.p_table = wl1251_part_table;
- wl->chip.acx_reg_table = wl1251_acx_reg_table;
-
- INIT_WORK(&wl->irq_work, wl1251_irq_work);
-}