diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_boot.c')
-rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_boot.c | 70 |
1 files changed, 34 insertions, 36 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c index fb3090c3ed1..2be76ee42bb 100644 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ b/drivers/net/wireless/wl12xx/wl1271_boot.c @@ -27,6 +27,7 @@ #include "wl1271_reg.h" #include "wl1271_boot.h" #include "wl1271_spi.h" +#include "wl1271_io.h" #include "wl1271_event.h" static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { @@ -93,19 +94,19 @@ static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) u32 cpu_ctrl; /* 10.5.0 run the firmware (I) */ - cpu_ctrl = wl1271_spi_read32(wl, ACX_REG_ECPU_CONTROL); + cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL); /* 10.5.1 run the firmware (II) */ cpu_ctrl |= flag; - wl1271_spi_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); + wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); } static void wl1271_boot_fw_version(struct wl1271 *wl) { struct wl1271_static_data static_data; - wl1271_spi_read(wl, wl->cmd_box_addr, - &static_data, sizeof(static_data), false); + wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data), + false); strncpy(wl->chip.fw_ver, static_data.fw_version, sizeof(wl->chip.fw_ver)); @@ -164,7 +165,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, memcpy(chunk, p, CHUNK_SIZE); wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", p, addr); - wl1271_spi_write(wl, addr, chunk, CHUNK_SIZE, false); + wl1271_write(wl, addr, chunk, CHUNK_SIZE, false); chunk_num++; } @@ -175,7 +176,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, memcpy(chunk, p, fw_data_len % CHUNK_SIZE); wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x", fw_data_len % CHUNK_SIZE, p, addr); - wl1271_spi_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); + wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); kfree(chunk); return 0; @@ -256,7 +257,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl) wl1271_debug(DEBUG_BOOT, "nvs burst write 0x%x: 0x%x", dest_addr, val); - wl1271_spi_write32(wl, dest_addr, val); + wl1271_write32(wl, dest_addr, val); nvs_ptr += 4; dest_addr += 4; @@ -290,7 +291,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl) /* FIXME: In wl1271, we upload everything at once. No endianness handling needed here?! The ref driver doesn't do anything about it at this point */ - wl1271_spi_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); + wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); kfree(nvs_aligned); return 0; @@ -299,9 +300,9 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl) static void wl1271_boot_enable_interrupts(struct wl1271 *wl) { enable_irq(wl->irq); - wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, - WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); - wl1271_spi_write32(wl, HI_CFG, HI_CFG_DEF_VAL); + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); + wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL); } static int wl1271_boot_soft_reset(struct wl1271 *wl) @@ -310,13 +311,12 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl) u32 boot_data; /* perform soft reset */ - wl1271_spi_write32(wl, ACX_REG_SLV_SOFT_RESET, - ACX_SLV_SOFT_RESET_BIT); + wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); /* SOFT_RESET is self clearing */ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); while (1) { - boot_data = wl1271_spi_read32(wl, ACX_REG_SLV_SOFT_RESET); + boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET); wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) break; @@ -332,10 +332,10 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl) } /* disable Rx/Tx */ - wl1271_spi_write32(wl, ENABLE, 0x0); + wl1271_write32(wl, ENABLE, 0x0); /* disable auto calibration on start*/ - wl1271_spi_write32(wl, SPARE_A2, 0xffff); + wl1271_write32(wl, SPARE_A2, 0xffff); return 0; } @@ -347,7 +347,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); - chip_id = wl1271_spi_read32(wl, CHIP_ID_B); + chip_id = wl1271_read32(wl, CHIP_ID_B); wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); @@ -360,8 +360,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) loop = 0; while (loop++ < INIT_LOOP) { udelay(INIT_LOOP_DELAY); - interrupt = wl1271_spi_read32(wl, - ACX_REG_INTERRUPT_NO_CLEAR); + interrupt = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); if (interrupt == 0xffffffff) { wl1271_error("error reading hardware complete " @@ -370,8 +369,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) } /* check that ACX_INTR_INIT_COMPLETE is enabled */ else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) { - wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK, - WL1271_ACX_INTR_INIT_COMPLETE); + wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1271_ACX_INTR_INIT_COMPLETE); break; } } @@ -383,10 +382,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) } /* get hardware config command mail box */ - wl->cmd_box_addr = wl1271_spi_read32(wl, REG_COMMAND_MAILBOX_PTR); + wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR); /* get hardware config event mail box */ - wl->event_box_addr = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR); + wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); /* set the working partition to its "running" mode offset */ wl1271_set_partition(wl, &part_table[PART_WORK]); @@ -459,9 +458,9 @@ int wl1271_boot(struct wl1271 *wl) wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); } - wl1271_spi_write32(wl, PLL_PARAMETERS, clk); + wl1271_write32(wl, PLL_PARAMETERS, clk); - pause = wl1271_spi_read32(wl, PLL_PARAMETERS); + pause = wl1271_read32(wl, PLL_PARAMETERS); wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); @@ -470,10 +469,10 @@ int wl1271_boot(struct wl1271 *wl) * 0x3ff (magic number ). How does * this work?! */ pause |= WU_COUNTER_PAUSE_VAL; - wl1271_spi_write32(wl, WU_COUNTER_PAUSE, pause); + wl1271_write32(wl, WU_COUNTER_PAUSE, pause); /* Continue the ELP wake up sequence */ - wl1271_spi_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); udelay(500); wl1271_set_partition(wl, &part_table[PART_DRPW]); @@ -483,18 +482,18 @@ int wl1271_boot(struct wl1271 *wl) before taking DRPw out of reset */ wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START); - clk = wl1271_spi_read32(wl, DRPW_SCRATCH_START); + clk = wl1271_read32(wl, DRPW_SCRATCH_START); wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); /* 2 */ clk |= (REF_CLOCK << 1) << 4; - wl1271_spi_write32(wl, DRPW_SCRATCH_START, clk); + wl1271_write32(wl, DRPW_SCRATCH_START, clk); wl1271_set_partition(wl, &part_table[PART_WORK]); /* Disable interrupts */ - wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); ret = wl1271_boot_soft_reset(wl); if (ret < 0) @@ -509,23 +508,22 @@ int wl1271_boot(struct wl1271 *wl) * ACX_EEPROMLESS_IND_REG */ wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); - wl1271_spi_write32(wl, ACX_EEPROMLESS_IND_REG, - ACX_EEPROMLESS_IND_REG); + wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG); - tmp = wl1271_spi_read32(wl, CHIP_ID_B); + tmp = wl1271_read32(wl, CHIP_ID_B); wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); /* 6. read the EEPROM parameters */ - tmp = wl1271_spi_read32(wl, SCR_PAD2); + tmp = wl1271_read32(wl, SCR_PAD2); ret = wl1271_boot_write_irq_polarity(wl); if (ret < 0) goto out; /* FIXME: Need to check whether this is really what we want */ - wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, - WL1271_ACX_ALL_EVENTS_VECTOR); + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_ALL_EVENTS_VECTOR); /* WL1271: The reference driver skips steps 7 to 10 (jumps directly * to upload_fw) */ |