1 files changed, 53 insertions, 125 deletions

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 48e10b0c7e7..e52a650f673 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -103,8 +103,8 @@ module_param(pc_debug, int, 0);
  * release a socket, in response to card insertion and ejection events.  They
  * are invoked from the wl24 event handler.
  */
-static void wl3501_config(dev_link_t *link);
-static void wl3501_release(dev_link_t *link);
+static int wl3501_config(struct pcmcia_device *link);
+static void wl3501_release(struct pcmcia_device *link);
 
 /*
  * The dev_info variable is the "key" that is used to match up this
@@ -226,17 +226,6 @@ static void iw_copy_mgmt_info_element(struct iw_mgmt_info_element *to,
 	iw_set_mgmt_info_element(from->id, to, from->data, from->len);
 }
 
-/*
- * A linked list of "instances" of the wl24 device.  Each actual PCMCIA card
- * corresponds to one device instance, and is described by one dev_link_t
- * structure (defined in ds.h).
- *
- * You may not want to use a linked list for this -- for example, the memory
- * card driver uses an array of dev_link_t pointers, where minor device numbers
- * are used to derive the corresponding array index.
- */
-static dev_link_t *wl3501_dev_list;
-
 static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 {
 	wl3501_outb(page, this->base_addr + WL3501_NIC_BSS);
@@ -1281,15 +1270,10 @@ static int wl3501_close(struct net_device *dev)
 	struct wl3501_card *this = dev->priv;
 	int rc = -ENODEV;
 	unsigned long flags;
-	dev_link_t *link;
+	struct pcmcia_device *link;
+	link = this->p_dev;
 
 	spin_lock_irqsave(&this->lock, flags);
-	/* Check if the device is in wl3501_dev_list */
-	for (link = wl3501_dev_list; link; link = link->next)
-		if (link->priv == dev)
-			break;
-	if (!link)
-		goto out;
 	link->open--;
 
 	/* Stop wl3501_hard_start_xmit() from now on */
@@ -1301,7 +1285,6 @@ static int wl3501_close(struct net_device *dev)
 
 	rc = 0;
 	printk(KERN_INFO "%s: WL3501 closed\n", dev->name);
-out:
 	spin_unlock_irqrestore(&this->lock, flags);
 	return rc;
 }
@@ -1400,14 +1383,11 @@ static int wl3501_open(struct net_device *dev)
 	int rc = -ENODEV;
 	struct wl3501_card *this = dev->priv;
 	unsigned long flags;
-	dev_link_t *link;
+	struct pcmcia_device *link;
+	link = this->p_dev;
 
 	spin_lock_irqsave(&this->lock, flags);
-	/* Check if the device is in wl3501_dev_list */
-	for (link = wl3501_dev_list; link; link = link->next)
-		if (link->priv == dev)
-			break;
-	if (!DEV_OK(link))
+	if (!pcmcia_dev_present(link))
 		goto out;
 	netif_device_attach(dev);
 	link->open++;
@@ -1497,38 +1477,23 @@ static struct ethtool_ops ops = {
  * Services. If it has been released, all local data structures are freed.
  * Otherwise, the structures will be freed when the device is released.
  */
-static void wl3501_detach(struct pcmcia_device *p_dev)
+static void wl3501_detach(struct pcmcia_device *link)
 {
-	dev_link_t *link = dev_to_instance(p_dev);
-	dev_link_t **linkp;
 	struct net_device *dev = link->priv;
 
-	/* Locate device structure */
-	for (linkp = &wl3501_dev_list; *linkp; linkp = &(*linkp)->next)
-		if (*linkp == link)
-			break;
-	if (!*linkp)
-		goto out;
-
 	/* If the device is currently configured and active, we won't actually
 	 * delete it yet.  Instead, it is marked so that when the release()
 	 * function is called, that will trigger a proper detach(). */
 
-	if (link->state & DEV_CONFIG) {
-		while (link->open > 0)
-			wl3501_close(dev);
-
-		netif_device_detach(dev);
-		wl3501_release(link);
-	}
+	while (link->open > 0)
+		wl3501_close(dev);
 
-	/* Unlink device structure, free pieces */
-	*linkp = link->next;
+	netif_device_detach(dev);
+	wl3501_release(link);
 
 	if (link->priv)
 		free_netdev(link->priv);
-	kfree(link);
-out:
+
 	return;
 }
 
@@ -1953,33 +1918,26 @@ static const struct iw_handler_def wl3501_handler_def = {
  * The dev_link structure is initialized, but we don't actually configure the
  * card at this point -- we wait until we receive a card insertion event.
  */
-static int wl3501_attach(struct pcmcia_device *p_dev)
+static int wl3501_probe(struct pcmcia_device *p_dev)
 {
-	dev_link_t *link;
 	struct net_device *dev;
 	struct wl3501_card *this;
 
-	/* Initialize the dev_link_t structure */
-	link = kzalloc(sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	/* The io structure describes IO port mapping */
-	link->io.NumPorts1	= 16;
-	link->io.Attributes1	= IO_DATA_PATH_WIDTH_8;
-	link->io.IOAddrLines	= 5;
+	p_dev->io.NumPorts1	= 16;
+	p_dev->io.Attributes1	= IO_DATA_PATH_WIDTH_8;
+	p_dev->io.IOAddrLines	= 5;
 
 	/* Interrupt setup */
-	link->irq.Attributes	= IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1	= IRQ_LEVEL_ID;
-	link->irq.Handler = wl3501_interrupt;
+	p_dev->irq.Attributes	= IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	p_dev->irq.IRQInfo1	= IRQ_LEVEL_ID;
+	p_dev->irq.Handler = wl3501_interrupt;
 
 	/* General socket configuration */
-	link->conf.Attributes	= CONF_ENABLE_IRQ;
-	link->conf.Vcc		= 50;
-	link->conf.IntType	= INT_MEMORY_AND_IO;
-	link->conf.ConfigIndex	= 1;
-	link->conf.Present	= PRESENT_OPTION;
+	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
+	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
+	p_dev->conf.ConfigIndex	= 1;
+	p_dev->conf.Present	= PRESENT_OPTION;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
 	if (!dev)
@@ -1992,22 +1950,15 @@ static int wl3501_attach(struct pcmcia_device *p_dev)
 	dev->get_stats		= wl3501_get_stats;
 	this = dev->priv;
 	this->wireless_data.spy_data = &this->spy_data;
+	this->p_dev = p_dev;
 	dev->wireless_data	= &this->wireless_data;
 	dev->wireless_handlers	= (struct iw_handler_def *)&wl3501_handler_def;
 	SET_ETHTOOL_OPS(dev, &ops);
 	netif_stop_queue(dev);
-	link->priv = link->irq.Instance = dev;
-
-	link->handle = p_dev;
-	p_dev->instance = link;
-
-	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-	wl3501_config(link);
+	p_dev->priv = p_dev->irq.Instance = dev;
 
-	return 0;
+	return wl3501_config(p_dev);
 out_link:
-	kfree(link);
-	link = NULL;
 	return -ENOMEM;
 }
 
@@ -2022,11 +1973,10 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
  * received, to configure the PCMCIA socket, and to make the ethernet device
  * available to the system.
  */
-static void wl3501_config(dev_link_t *link)
+static int wl3501_config(struct pcmcia_device *link)
 {
 	tuple_t tuple;
 	cisparse_t parse;
-	client_handle_t handle = link->handle;
 	struct net_device *dev = link->priv;
 	int i = 0, j, last_fn, last_ret;
 	unsigned char bf[64];
@@ -2035,18 +1985,15 @@ static void wl3501_config(dev_link_t *link)
 	/* This reads the card's CONFIG tuple to find its config registers. */
 	tuple.Attributes	= 0;
 	tuple.DesiredTuple	= CISTPL_CONFIG;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 	tuple.TupleData		= bf;
 	tuple.TupleDataMax	= sizeof(bf);
 	tuple.TupleOffset	= 0;
-	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
-	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
 	link->conf.ConfigBase	= parse.config.base;
 	link->conf.Present	= parse.config.rmask[0];
 
-	/* Configure card */
-	link->state |= DEV_CONFIG;
-
 	/* Try allocating IO ports.  This tries a few fixed addresses.  If you
 	 * want, you can also read the card's config table to pick addresses --
 	 * see the serial driver for an example. */
@@ -2056,28 +2003,28 @@ static void wl3501_config(dev_link_t *link)
 		 * 0x200-0x2ff, and so on, because this seems safer */
 		link->io.BasePort1 = j;
 		link->io.BasePort2 = link->io.BasePort1 + 0x10;
-		i = pcmcia_request_io(link->handle, &link->io);
+		i = pcmcia_request_io(link, &link->io);
 		if (i == CS_SUCCESS)
 			break;
 	}
 	if (i != CS_SUCCESS) {
-		cs_error(link->handle, RequestIO, i);
+		cs_error(link, RequestIO, i);
 		goto failed;
 	}
 
 	/* Now allocate an interrupt line. Note that this does not actually
 	 * assign a handler to the interrupt. */
 
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 
 	/* This actually configures the PCMCIA socket -- setting up the I/O
 	 * windows and the interrupt mapping.  */
 
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
-	SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+	SET_NETDEV_DEV(dev, &handle_to_dev(link));
 	if (register_netdev(dev)) {
 		printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
 		goto failed;
@@ -2088,10 +2035,9 @@ static void wl3501_config(dev_link_t *link)
 	this = dev->priv;
 	/*
 	 * At this point, the dev_node_t structure(s) should be initialized and
-	 * arranged in a linked list at link->dev.
+	 * arranged in a linked list at link->dev_node.
 	 */
-	link->dev = &this->node;
-	link->state &= ~DEV_CONFIG_PENDING;
+	link->dev_node = &this->node;
 
 	this->base_addr = dev->base_addr;
 
@@ -2127,13 +2073,13 @@ static void wl3501_config(dev_link_t *link)
 	spin_lock_init(&this->lock);
 	init_waitqueue_head(&this->wait);
 	netif_start_queue(dev);
-	goto out;
+	return 0;
+
 cs_failed:
-	cs_error(link->handle, last_fn, last_ret);
+	cs_error(link, last_fn, last_ret);
 failed:
 	wl3501_release(link);
-out:
-	return;
+	return -ENODEV;
 }
 
 /**
@@ -2144,52 +2090,36 @@ out:
  * and release the PCMCIA configuration.  If the device is still open, this
  * will be postponed until it is closed.
  */
-static void wl3501_release(dev_link_t *link)
+static void wl3501_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 
 	/* Unlink the device chain */
-	if (link->dev) {
+	if (link->dev_node)
 		unregister_netdev(dev);
-		link->dev = NULL;
-	}
 
-	/* Don't bother checking to see if these succeed or not */
-	pcmcia_release_configuration(link->handle);
-	pcmcia_release_io(link->handle, &link->io);
-	pcmcia_release_irq(link->handle, &link->irq);
-	link->state &= ~DEV_CONFIG;
+	pcmcia_disable_device(link);
 }
 
-static int wl3501_suspend(struct pcmcia_device *p_dev)
+static int wl3501_suspend(struct pcmcia_device *link)
 {
-	dev_link_t *link = dev_to_instance(p_dev);
 	struct net_device *dev = link->priv;
 
-	link->state |= DEV_SUSPEND;
-
 	wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND);
-	if (link->state & DEV_CONFIG) {
-		if (link->open)
-			netif_device_detach(dev);
-		pcmcia_release_configuration(link->handle);
-	}
+	if (link->open)
+		netif_device_detach(dev);
 
 	return 0;
 }
 
-static int wl3501_resume(struct pcmcia_device *p_dev)
+static int wl3501_resume(struct pcmcia_device *link)
 {
-	dev_link_t *link = dev_to_instance(p_dev);
 	struct net_device *dev = link->priv;
 
 	wl3501_pwr_mgmt(dev->priv, WL3501_RESUME);
-	if (link->state & DEV_CONFIG) {
-		pcmcia_request_configuration(link->handle, &link->conf);
-		if (link->open) {
-			wl3501_reset(dev);
-			netif_device_attach(dev);
-		}
+	if (link->open) {
+		wl3501_reset(dev);
+		netif_device_attach(dev);
 	}
 
 	return 0;
@@ -2207,7 +2137,7 @@ static struct pcmcia_driver wl3501_driver = {
 	.drv		= {
 		.name	= "wl3501_cs",
 	},
-	.probe		= wl3501_attach,
+	.probe		= wl3501_probe,
 	.remove		= wl3501_detach,
 	.id_table	= wl3501_ids,
 	.suspend	= wl3501_suspend,
@@ -2221,9 +2151,7 @@ static int __init wl3501_init_module(void)
 
 static void __exit wl3501_exit_module(void)
 {
-	dprintk(0, ": unloading");
 	pcmcia_unregister_driver(&wl3501_driver);
-	BUG_ON(wl3501_dev_list != NULL);
 }
 
 module_init(wl3501_init_module);