diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 147 | ||||
| -rw-r--r-- | drivers/net/wireless/Makefile | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/Kconfig | 150 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2100.c (renamed from drivers/net/wireless/ipw2100.c) | 0 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2100.h (renamed from drivers/net/wireless/ipw2100.h) | 0 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2200.c (renamed from drivers/net/wireless/ipw2200.c) | 0 | ||||
| -rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2200.h (renamed from drivers/net/wireless/ipw2200.h) | 0 |
8 files changed, 159 insertions, 149 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 35dbc89a1a3..84b49c83ae6 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -123,152 +123,6 @@ config PCMCIA_RAYCS To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. -config IPW2100 - tristate "Intel PRO/Wireless 2100 Network Connection" - depends on PCI && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select LIB80211 - select IEEE80211 - ---help--- - A driver for the Intel PRO/Wireless 2100 Network - Connection 802.11b wireless network adapter. - - See <file:Documentation/networking/README.ipw2100> for information on - the capabilities currently enabled in this driver and for tips - for debugging issues and problems. - - In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - <http://ipw2100.sf.net/>. Once you have the firmware image, you - will need to place it in /lib/firmware. - - You will also very likely need the Wireless Tools in order to - configure your card: - - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - - It is recommended that you compile this driver as a module (M) - rather than built-in (Y). This driver requires firmware at device - initialization time, and when built-in this typically happens - before the filesystem is accessible (hence firmware will be - unavailable and initialization will fail). If you do choose to build - this driver into your kernel image, you can avoid this problem by - including the firmware and a firmware loader in an initramfs. - -config IPW2100_MONITOR - bool "Enable promiscuous mode" - depends on IPW2100 - ---help--- - Enables promiscuous/monitor mode support for the ipw2100 driver. - With this feature compiled into the driver, you can switch to - promiscuous mode via the Wireless Tool's Monitor mode. While in this - mode, no packets can be sent. - -config IPW2100_DEBUG - bool "Enable full debugging output in IPW2100 module." - depends on IPW2100 - ---help--- - This option will enable debug tracing output for the IPW2100. - - This will result in the kernel module being ~60k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/bus/pci/drivers/ipw2100/debug_level - - This entry will only exist if this option is enabled. - - If you are not trying to debug or develop the IPW2100 driver, you - most likely want to say N here. - -config IPW2200 - tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select LIB80211 - select IEEE80211 - ---help--- - A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network - Connection adapters. - - See <file:Documentation/networking/README.ipw2200> for - information on the capabilities currently enabled in this - driver and for tips for debugging issues and problems. - - In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 - for information on where to install the firmware images. - - You will also very likely need the Wireless Tools in order to - configure your card: - - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - - It is recommended that you compile this driver as a module (M) - rather than built-in (Y). This driver requires firmware at device - initialization time, and when built-in this typically happens - before the filesystem is accessible (hence firmware will be - unavailable and initialization will fail). If you do choose to build - this driver into your kernel image, you can avoid this problem by - including the firmware and a firmware loader in an initramfs. - -config IPW2200_MONITOR - bool "Enable promiscuous mode" - depends on IPW2200 - ---help--- - Enables promiscuous/monitor mode support for the ipw2200 driver. - With this feature compiled into the driver, you can switch to - promiscuous mode via the Wireless Tool's Monitor mode. While in this - mode, no packets can be sent. - -config IPW2200_RADIOTAP - bool "Enable radiotap format 802.11 raw packet support" - depends on IPW2200_MONITOR - -config IPW2200_PROMISCUOUS - bool "Enable creation of a RF radiotap promiscuous interface" - depends on IPW2200_MONITOR - select IPW2200_RADIOTAP - ---help--- - Enables the creation of a second interface prefixed 'rtap'. - This second interface will provide every received in radiotap - format. - - This is useful for performing wireless network analysis while - maintaining an active association. - - Example usage: - - % modprobe ipw2200 rtap_iface=1 - % ifconfig rtap0 up - % tethereal -i rtap0 - - If you do not specify 'rtap_iface=1' as a module parameter then - the rtap interface will not be created and you will need to turn - it on via sysfs: - - % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface - -config IPW2200_QOS - bool "Enable QoS support" - depends on IPW2200 && EXPERIMENTAL - -config IPW2200_DEBUG - bool "Enable full debugging output in IPW2200 module." - depends on IPW2200 - ---help--- - This option will enable low level debug tracing output for IPW2200. - - Note, normal debug code is already compiled in. This low level - debug option enables debug on hot paths (e.g Tx, Rx, ISR) and - will result in the kernel module being ~70 larger. Most users - will typically not need this high verbosity debug information. - - If you are not sure, say N here. - config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" depends on WLAN_80211 @@ -714,6 +568,7 @@ config MAC80211_HWSIM source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/ath5k/Kconfig" source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/b43/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index ed0023d0095..ac590e1ca8b 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -2,9 +2,8 @@ # Makefile for the Linux Wireless network device drivers. # -obj-$(CONFIG_IPW2100) += ipw2100.o - -obj-$(CONFIG_IPW2200) += ipw2200.o +obj-$(CONFIG_IPW2100) += ipw2x00/ +obj-$(CONFIG_IPW2200) += ipw2x00/ obj-$(CONFIG_STRIP) += strip.o obj-$(CONFIG_ARLAN) += arlan.o diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig new file mode 100644 index 00000000000..67c57bfa5c1 --- /dev/null +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -0,0 +1,150 @@ +# +# Intel Centrino wireless drivers +# + +config IPW2100 + tristate "Intel PRO/Wireless 2100 Network Connection" + depends on PCI && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + select LIB80211 + select IEEE80211 + ---help--- + A driver for the Intel PRO/Wireless 2100 Network + Connection 802.11b wireless network adapter. + + See <file:Documentation/networking/README.ipw2100> for information on + the capabilities currently enabled in this driver and for tips + for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2100.sf.net/>. Once you have the firmware image, you + will need to place it in /lib/firmware. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + It is recommended that you compile this driver as a module (M) + rather than built-in (Y). This driver requires firmware at device + initialization time, and when built-in this typically happens + before the filesystem is accessible (hence firmware will be + unavailable and initialization will fail). If you do choose to build + this driver into your kernel image, you can avoid this problem by + including the firmware and a firmware loader in an initramfs. + +config IPW2100_MONITOR + bool "Enable promiscuous mode" + depends on IPW2100 + ---help--- + Enables promiscuous/monitor mode support for the ipw2100 driver. + With this feature compiled into the driver, you can switch to + promiscuous mode via the Wireless Tool's Monitor mode. While in this + mode, no packets can be sent. + +config IPW2100_DEBUG + bool "Enable full debugging output in IPW2100 module." + depends on IPW2100 + ---help--- + This option will enable debug tracing output for the IPW2100. + + This will result in the kernel module being ~60k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/bus/pci/drivers/ipw2100/debug_level + + This entry will only exist if this option is enabled. + + If you are not trying to debug or develop the IPW2100 driver, you + most likely want to say N here. + +config IPW2200 + tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" + depends on PCI && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + select LIB80211 + select IEEE80211 + ---help--- + A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network + Connection adapters. + + See <file:Documentation/networking/README.ipw2200> for + information on the capabilities currently enabled in this + driver and for tips for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 + for information on where to install the firmware images. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + It is recommended that you compile this driver as a module (M) + rather than built-in (Y). This driver requires firmware at device + initialization time, and when built-in this typically happens + before the filesystem is accessible (hence firmware will be + unavailable and initialization will fail). If you do choose to build + this driver into your kernel image, you can avoid this problem by + including the firmware and a firmware loader in an initramfs. + +config IPW2200_MONITOR + bool "Enable promiscuous mode" + depends on IPW2200 + ---help--- + Enables promiscuous/monitor mode support for the ipw2200 driver. + With this feature compiled into the driver, you can switch to + promiscuous mode via the Wireless Tool's Monitor mode. While in this + mode, no packets can be sent. + +config IPW2200_RADIOTAP + bool "Enable radiotap format 802.11 raw packet support" + depends on IPW2200_MONITOR + +config IPW2200_PROMISCUOUS + bool "Enable creation of a RF radiotap promiscuous interface" + depends on IPW2200_MONITOR + select IPW2200_RADIOTAP + ---help--- + Enables the creation of a second interface prefixed 'rtap'. + This second interface will provide every received in radiotap + format. + + This is useful for performing wireless network analysis while + maintaining an active association. + + Example usage: + + % modprobe ipw2200 rtap_iface=1 + % ifconfig rtap0 up + % tethereal -i rtap0 + + If you do not specify 'rtap_iface=1' as a module parameter then + the rtap interface will not be created and you will need to turn + it on via sysfs: + + % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface + +config IPW2200_QOS + bool "Enable QoS support" + depends on IPW2200 && EXPERIMENTAL + +config IPW2200_DEBUG + bool "Enable full debugging output in IPW2200 module." + depends on IPW2200 + ---help--- + This option will enable low level debug tracing output for IPW2200. + + Note, normal debug code is already compiled in. This low level + debug option enables debug on hot paths (e.g Tx, Rx, ISR) and + will result in the kernel module being ~70 larger. Most users + will typically not need this high verbosity debug information. + + If you are not sure, say N here. + diff --git a/drivers/net/wireless/ipw2x00/Makefile b/drivers/net/wireless/ipw2x00/Makefile new file mode 100644 index 00000000000..dbc0d81b6fa --- /dev/null +++ b/drivers/net/wireless/ipw2x00/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Intel Centrino wireless drivers +# + +obj-$(CONFIG_IPW2100) += ipw2100.o +obj-$(CONFIG_IPW2200) += ipw2200.o diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 2d2044d3d1c..2d2044d3d1c 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h index bbf1ddcafba..bbf1ddcafba 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2x00/ipw2100.h diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index d2a2b7586d0..d2a2b7586d0 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2x00/ipw2200.h index 0a84d52147b..0a84d52147b 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2x00/ipw2200.h |