diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/b43/b43.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/main.c | 199 |
2 files changed, 117 insertions, 83 deletions
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 4ba4a73673b..eff2a158a41 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -730,6 +730,7 @@ struct b43_wl { /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ struct sk_buff *current_beacon; + struct ieee80211_tx_control beacon_txctl; bool beacon0_uploaded; bool beacon1_uploaded; struct work_struct beacon_update_trigger; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index ec28a6ef42b..1aa0f727174 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1281,22 +1281,107 @@ static void b43_write_template_common(struct b43_wldev *dev, size + sizeof(struct b43_plcp_hdr6)); } +/* Check if the use of the antenna that ieee80211 told us to + * use is possible. This will fall back to DEFAULT. + * "antenna_nr" is the antenna identifier we got from ieee80211. */ +u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, + u8 antenna_nr) +{ + u8 antenna_mask; + + if (antenna_nr == 0) { + /* Zero means "use default antenna". That's always OK. */ + return 0; + } + + /* Get the mask of available antennas. */ + if (dev->phy.gmode) + antenna_mask = dev->dev->bus->sprom.ant_available_bg; + else + antenna_mask = dev->dev->bus->sprom.ant_available_a; + + if (!(antenna_mask & (1 << (antenna_nr - 1)))) { + /* This antenna is not available. Fall back to default. */ + return 0; + } + + return antenna_nr; +} + +static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna) +{ + antenna = b43_ieee80211_antenna_sanitize(dev, antenna); + switch (antenna) { + case 0: /* default/diversity */ + return B43_ANTENNA_DEFAULT; + case 1: /* Antenna 0 */ + return B43_ANTENNA0; + case 2: /* Antenna 1 */ + return B43_ANTENNA1; + case 3: /* Antenna 2 */ + return B43_ANTENNA2; + case 4: /* Antenna 3 */ + return B43_ANTENNA3; + default: + return B43_ANTENNA_DEFAULT; + } +} + +/* Convert a b43 antenna number value to the PHY TX control value. */ +static u16 b43_antenna_to_phyctl(int antenna) +{ + switch (antenna) { + case B43_ANTENNA0: + return B43_TXH_PHY_ANT0; + case B43_ANTENNA1: + return B43_TXH_PHY_ANT1; + case B43_ANTENNA2: + return B43_TXH_PHY_ANT2; + case B43_ANTENNA3: + return B43_TXH_PHY_ANT3; + case B43_ANTENNA_AUTO: + return B43_TXH_PHY_ANT01AUTO; + } + B43_WARN_ON(1); + return 0; +} + static void b43_write_beacon_template(struct b43_wldev *dev, u16 ram_offset, - u16 shm_size_offset, u8 rate) + u16 shm_size_offset) { unsigned int i, len, variable_len; const struct ieee80211_mgmt *bcn; const u8 *ie; bool tim_found = 0; + unsigned int rate; + u16 ctl; + int antenna; bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); len = min((size_t) dev->wl->current_beacon->len, 0x200 - sizeof(struct b43_plcp_hdr6)); + rate = dev->wl->beacon_txctl.tx_rate->hw_value; b43_write_template_common(dev, (const u8 *)bcn, len, ram_offset, shm_size_offset, rate); + /* Write the PHY TX control parameters. */ + antenna = b43_antenna_from_ieee80211(dev, + dev->wl->beacon_txctl.antenna_sel_tx); + antenna = b43_antenna_to_phyctl(antenna); + ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); + /* We can't send beacons with short preamble. Would get PHY errors. */ + ctl &= ~B43_TXH_PHY_SHORTPRMBL; + ctl &= ~B43_TXH_PHY_ANT; + ctl &= ~B43_TXH_PHY_ENC; + ctl |= antenna; + if (b43_is_cck_rate(rate)) + ctl |= B43_TXH_PHY_ENC_CCK; + else + ctl |= B43_TXH_PHY_ENC_OFDM; + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); + /* Find the position of the TIM and the DTIM_period value * and write them to SHM. */ ie = bcn->u.beacon.variable; @@ -1474,8 +1559,7 @@ static void handle_irq_beacon(struct b43_wldev *dev) if (!beacon0_valid) { if (!wl->beacon0_uploaded) { - b43_write_beacon_template(dev, 0x68, 0x18, - B43_CCK_RATE_1MB); + b43_write_beacon_template(dev, 0x68, 0x18); b43_write_probe_resp_template(dev, 0x268, 0x4A, &__b43_ratetable[3]); wl->beacon0_uploaded = 1; @@ -1485,8 +1569,7 @@ static void handle_irq_beacon(struct b43_wldev *dev) b43_write32(dev, B43_MMIO_MACCMD, cmd); } else if (!beacon1_valid) { if (!wl->beacon1_uploaded) { - b43_write_beacon_template(dev, 0x468, 0x1A, - B43_CCK_RATE_1MB); + b43_write_beacon_template(dev, 0x468, 0x1A); wl->beacon1_uploaded = 1; } cmd = b43_read32(dev, B43_MMIO_MACCMD); @@ -1519,7 +1602,8 @@ static void b43_beacon_update_trigger_work(struct work_struct *work) /* Asynchronously update the packet templates in template RAM. * Locking: Requires wl->irq_lock to be locked. */ -static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon) +static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon, + const struct ieee80211_tx_control *txctl) { /* This is the top half of the ansynchronous beacon update. * The bottom half is the beacon IRQ. @@ -1530,6 +1614,7 @@ static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon) if (wl->current_beacon) dev_kfree_skb_any(wl->current_beacon); wl->current_beacon = beacon; + memcpy(&wl->beacon_txctl, txctl, sizeof(wl->beacon_txctl)); wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; queue_work(wl->hw->workqueue, &wl->beacon_update_trigger); @@ -2363,38 +2448,28 @@ static void b43_rate_memory_init(struct b43_wldev *dev) } } +/* Set the default values for the PHY TX Control Words. */ +static void b43_set_phytxctl_defaults(struct b43_wldev *dev) +{ + u16 ctl = 0; + + ctl |= B43_TXH_PHY_ENC_CCK; + ctl |= B43_TXH_PHY_ANT01AUTO; + ctl |= B43_TXH_PHY_TXPWR; + + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl); +} + /* Set the TX-Antenna for management frames sent by firmware. */ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) { - u16 ant = 0; + u16 ant; u16 tmp; - switch (antenna) { - case B43_ANTENNA0: - ant |= B43_TXH_PHY_ANT0; - break; - case B43_ANTENNA1: - ant |= B43_TXH_PHY_ANT1; - break; - case B43_ANTENNA2: - ant |= B43_TXH_PHY_ANT2; - break; - case B43_ANTENNA3: - ant |= B43_TXH_PHY_ANT3; - break; - case B43_ANTENNA_AUTO: - ant |= B43_TXH_PHY_ANT01AUTO; - break; - default: - B43_WARN_ON(1); - } - - /* FIXME We also need to set the other flags of the PHY control field somewhere. */ + ant = b43_antenna_to_phyctl(antenna); - /* For Beacons */ - tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); - tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, tmp); /* For ACK/CTS */ tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL); tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; @@ -3112,52 +3187,6 @@ init_failure: return err; } -/* Check if the use of the antenna that ieee80211 told us to - * use is possible. This will fall back to DEFAULT. - * "antenna_nr" is the antenna identifier we got from ieee80211. */ -u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, - u8 antenna_nr) -{ - u8 antenna_mask; - - if (antenna_nr == 0) { - /* Zero means "use default antenna". That's always OK. */ - return 0; - } - - /* Get the mask of available antennas. */ - if (dev->phy.gmode) - antenna_mask = dev->dev->bus->sprom.ant_available_bg; - else - antenna_mask = dev->dev->bus->sprom.ant_available_a; - - if (!(antenna_mask & (1 << (antenna_nr - 1)))) { - /* This antenna is not available. Fall back to default. */ - return 0; - } - - return antenna_nr; -} - -static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna) -{ - antenna = b43_ieee80211_antenna_sanitize(dev, antenna); - switch (antenna) { - case 0: /* default/diversity */ - return B43_ANTENNA_DEFAULT; - case 1: /* Antenna 0 */ - return B43_ANTENNA0; - case 2: /* Antenna 1 */ - return B43_ANTENNA1; - case 3: /* Antenna 2 */ - return B43_ANTENNA2; - case 4: /* Antenna 3 */ - return B43_ANTENNA3; - default: - return B43_ANTENNA_DEFAULT; - } -} - static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct b43_wl *wl = hw_to_b43_wl(hw); @@ -3405,8 +3434,10 @@ static int b43_op_config_interface(struct ieee80211_hw *hw, if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) { B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP); b43_set_ssid(dev, conf->ssid, conf->ssid_len); - if (conf->beacon) - b43_update_templates(wl, conf->beacon); + if (conf->beacon) { + b43_update_templates(wl, conf->beacon, + conf->beacon_control); + } } b43_write_mac_bssid_templates(dev); } @@ -3877,6 +3908,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1); b43_rate_memory_init(dev); + b43_set_phytxctl_defaults(dev); /* Minimum Contention Window */ if (phy->type == B43_PHYTYPE_B) { @@ -4087,16 +4119,17 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) struct b43_wl *wl = hw_to_b43_wl(hw); struct sk_buff *beacon; unsigned long flags; + struct ieee80211_tx_control txctl; /* We could modify the existing beacon and set the aid bit in * the TIM field, but that would probably require resizing and * moving of data within the beacon template. * Simply request a new beacon and let mac80211 do the hard work. */ - beacon = ieee80211_beacon_get(hw, wl->vif, NULL); + beacon = ieee80211_beacon_get(hw, wl->vif, &txctl); if (unlikely(!beacon)) return -ENOMEM; spin_lock_irqsave(&wl->irq_lock, flags); - b43_update_templates(wl, beacon); + b43_update_templates(wl, beacon, &txctl); spin_unlock_irqrestore(&wl->irq_lock, flags); return 0; @@ -4110,7 +4143,7 @@ static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw, unsigned long flags; spin_lock_irqsave(&wl->irq_lock, flags); - b43_update_templates(wl, beacon); + b43_update_templates(wl, beacon, ctl); spin_unlock_irqrestore(&wl->irq_lock, flags); return 0; |