diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-calib.c | 15 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 35 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-dev.h | 10 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-power.c | 26 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-power.h | 2 |
6 files changed, 64 insertions, 30 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 78902da3d51..914a3ca5460 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2558,7 +2558,11 @@ static void iwl4965_post_associate(struct iwl_priv *priv) iwl_activate_qos(priv, 0); spin_unlock_irqrestore(&priv->lock, flags); - iwl_power_enable_management(priv); + /* the chain noise calibration will enabled PM upon completion + * If chain noise has already been run, then we need to enable + * power management here */ + if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) + iwl_power_enable_management(priv); /* Enable Rx differential gain and sensitivity calibrations */ iwl_chain_noise_reset(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index 35fb4a4f737..72fbf47229d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -808,13 +808,11 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, } } + /* Save for use within RXON, TX, SCAN commands, etc. */ + priv->chain_noise_data.active_chains = active_chains; IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", active_chains); - /* Save for use within RXON, TX, SCAN commands, etc. */ - /*priv->valid_antenna = active_chains;*/ - /*FIXME: should be reflected in RX chains in RXON */ - /* Analyze noise for rx balance */ average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); @@ -839,6 +837,15 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, priv->cfg->ops->utils->gain_computation(priv, average_noise, min_average_noise_antenna_i, min_average_noise); + + /* Some power changes may have been made during the calibration. + * Update and commit the RXON + */ + if (priv->cfg->ops->lib->update_chain_flags) + priv->cfg->ops->lib->update_chain_flags(priv); + + data->state = IWL_CHAIN_NOISE_DONE; + iwl_power_enable_management(priv); } EXPORT_SYMBOL(iwl_chain_noise_calibration); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index dbeaca15dda..46683eacfdc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -740,6 +740,17 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) return idle_cnt; } +/* up to 4 chains */ +static u8 iwl_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(4)) >> 4; + return res; +} + /** * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image * @@ -750,25 +761,35 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) { bool is_single = is_single_rx_stream(priv); bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - u8 idle_rx_cnt, active_rx_cnt; + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + if (priv->chain_noise_data.active_chains) + active_chains = priv->chain_noise_data.active_chains; + else + active_chains = priv->hw_params.valid_rx_ant; + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ active_rx_cnt = iwl_get_active_rx_chain_count(priv); idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - /* correct rx chain count accoridng hw settings */ - if (priv->hw_params.rx_chains_num < active_rx_cnt) - active_rx_cnt = priv->hw_params.rx_chains_num; - if (priv->hw_params.rx_chains_num < idle_rx_cnt) - idle_rx_cnt = priv->hw_params.rx_chains_num; + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = iwl_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 7934f56f729..6e150f678c6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -699,8 +699,9 @@ enum iwl4965_false_alarm_state { enum iwl4965_chain_noise_state { IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ - IWL_CHAIN_NOISE_ACCUMULATE = 1, - IWL_CHAIN_NOISE_CALIBRATED = 2, + IWL_CHAIN_NOISE_ACCUMULATE, + IWL_CHAIN_NOISE_CALIBRATED, + IWL_CHAIN_NOISE_DONE, }; enum iwl4965_calib_enabled_state { @@ -758,17 +759,18 @@ struct iwl_sensitivity_data { /* Chain noise (differential Rx gain) calib data */ struct iwl_chain_noise_data { - u8 state; - u16 beacon_count; + u32 active_chains; u32 chain_noise_a; u32 chain_noise_b; u32 chain_noise_c; u32 chain_signal_a; u32 chain_signal_b; u32 chain_signal_c; + u16 beacon_count; u8 disconn_array[NUM_RX_CHAINS]; u8 delta_gain_code[NUM_RX_CHAINS]; u8 radio_write; + u8 state; }; #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 16f834d0c48..bd6f600027d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -252,12 +252,21 @@ static int iwl_update_power_command(struct iwl_priv *priv, /* * calucaute the final power mode index */ -int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) +int iwl_power_update_mode(struct iwl_priv *priv, bool force) { struct iwl_power_mgr *setting = &(priv->power_data); int ret = 0; u16 uninitialized_var(final_mode); + /* Don't update the RX chain when chain noise calibration is running */ + if (priv->chain_noise_data.state != IWL_CHAIN_NOISE_DONE && + priv->chain_noise_data.state != IWL_CHAIN_NOISE_ALIVE) { + IWL_DEBUG_POWER("Cannot update the power, chain noise " + "calibration running: %d\n", + priv->chain_noise_data.state); + return -EAGAIN; + } + /* If on battery, set to 3, * if plugged into AC power, set to CAM ("continuously aware mode"), * else user level */ @@ -285,7 +294,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) final_mode = IWL_POWER_MODE_CAM; if (!iwl_is_rfkill(priv) && !setting->power_disabled && - ((setting->power_mode != final_mode) || refresh)) { + ((setting->power_mode != final_mode) || force)) { struct iwl_powertable_cmd cmd; if (final_mode != IWL_POWER_MODE_CAM) @@ -359,35 +368,26 @@ EXPORT_SYMBOL(iwl_power_enable_management); /* set user_power_setting */ int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode) { - int ret = 0; - if (mode > IWL_POWER_LIMIT) return -EINVAL; priv->power_data.user_power_setting = mode; - ret = iwl_power_update_mode(priv, 0); - - return ret; + return iwl_power_update_mode(priv, 0); } EXPORT_SYMBOL(iwl_power_set_user_mode); - /* set system_power_setting. This should be set by over all * PM application. */ int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode) { - int ret = 0; - if (mode > IWL_POWER_LIMIT) return -EINVAL; priv->power_data.system_power_setting = mode; - ret = iwl_power_update_mode(priv, 0); - - return ret; + return iwl_power_update_mode(priv, 0); } EXPORT_SYMBOL(iwl_power_set_system_mode); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index aa99f3647de..a5c334f10e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -80,7 +80,7 @@ struct iwl_power_mgr { void iwl_setup_power_deferred_work(struct iwl_priv *priv); void iwl_power_cancel_timeout(struct iwl_priv *priv); -int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh); +int iwl_power_update_mode(struct iwl_priv *priv, bool force); int iwl_power_disable_management(struct iwl_priv *priv, u32 ms); int iwl_power_enable_management(struct iwl_priv *priv); int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode); |