aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bonding/bond_main.c2
-rw-r--r--drivers/net/forcedeth.c3
-rw-r--r--drivers/net/ioc3-eth.c7
-rw-r--r--drivers/net/irda/nsc-ircc.c4
-rw-r--r--drivers/net/loopback.c2
-rw-r--r--drivers/net/ns83820.c6
-rw-r--r--drivers/net/sis900.c2
-rw-r--r--drivers/net/tulip/de4x5.c2
-rw-r--r--drivers/net/tulip/pnic2.c2
-rw-r--r--drivers/net/typhoon.c4
-rw-r--r--drivers/net/wan/wanxl.c4
-rw-r--r--drivers/net/wireless/orinoco.c2
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c2
-rw-r--r--drivers/net/wireless/prism54/islpci_hotplug.c3
14 files changed, 24 insertions, 21 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2d0ac169a86..f13a539dc16 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3159,7 +3159,7 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
* bond_netdev_event: handle netdev notifier chain events.
*
* This function receives events for the netdev chain. The caller (an
- * ioctl handler calling notifier_call_chain) holds the necessary
+ * ioctl handler calling blocking_notifier_call_chain) holds the necessary
* locks for us to safely manipulate the slave devices (RTNL lock,
* dev_probe_lock).
*/
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e7fc28b07e5..7627a75f4f7 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -134,6 +134,7 @@
#include <linux/random.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -2932,7 +2933,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
if (id->driver_data & DEV_HAS_HIGH_DMA) {
/* packet format 3: supports 40-bit addressing */
np->desc_ver = DESC_VER_3;
- if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
} else {
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 9b8295ee06e..ae71ed57c12 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -44,6 +44,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/dma-mapping.h>
#ifdef CONFIG_SERIAL_8250
#include <linux/serial_core.h>
@@ -1195,17 +1196,17 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int err, pci_using_dac;
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
"for consistent allocations\n", pci_name(pdev));
goto out;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR "%s: No usable DMA configuration, "
"aborting.\n", pci_name(pdev));
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 83141a3ff54..cc7ff8f00e4 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -207,7 +207,7 @@ static int __init nsc_ircc_init(void)
/* Register with PnP subsystem to detect disable ports */
ret = pnp_register_driver(&nsc_ircc_pnp_driver);
- if (ret >= 0)
+ if (!ret)
pnp_registered = 1;
ret = -ENODEV;
@@ -812,7 +812,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
int cfg_base = info->cfg_base;
int enabled;
- /* User is shure about his config... accept it. */
+ /* User is sure about his config... accept it. */
IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
"io=0x%04x, irq=%d, dma=%d\n",
__FUNCTION__, info->fir_base, info->irq, info->dma);
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 0c13795dca3..b79d6e8d304 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -172,7 +172,7 @@ static struct net_device_stats *get_stats(struct net_device *dev)
memset(stats, 0, sizeof(struct net_device_stats));
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
struct net_device_stats *lb_stats;
lb_stats = &per_cpu(loopback_stats, i);
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 0fede50abd3..8e9b1a537de 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1828,10 +1828,10 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
- if (sizeof(dma_addr_t) == 8 &&
- !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 8429ceb0138..b82191d2bee 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -2283,7 +2283,7 @@ static void set_rx_mode(struct net_device *net_dev)
int i, table_entries;
u32 rx_mode;
- /* 635 Hash Table entires = 256(2^16) */
+ /* 635 Hash Table entries = 256(2^16) */
if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
(sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16;
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index ee48bfd6734..d1a86a080a6 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -513,7 +513,7 @@ struct mii_phy {
u_char *rst; /* Start of reset sequence in SROM */
u_int mc; /* Media Capabilities */
u_int ana; /* NWay Advertisement */
- u_int fdx; /* Full DupleX capabilites for each media */
+ u_int fdx; /* Full DupleX capabilities for each media */
u_int ttm; /* Transmit Threshold Mode for each media */
u_int mci; /* 21142 MII Connector Interrupt info */
};
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 55f4a9a631b..ab985023fcc 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
/* negotiation ended successfully */
/* get the link partners reply and mask out all but
- * bits 24-21 which show the partners capabilites
+ * bits 24-21 which show the partners capabilities
* and match those to what we advertised
*
* then begin to interpret the results of the negotiation.
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index cde35dd8790..c1ce87a5f8d 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -208,7 +208,7 @@ static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
};
/* Notes on the new subsystem numbering scheme:
- * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
* bit 4 indicates if this card has secured firmware (we don't support it)
* bit 8 indicates if this is a (0) copper or (1) fiber card
* bits 12-16 indicate card type: (0) client and (1) server
@@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
/* we have two rings to choose from, but we only use txLo for now
* If we start using the Hi ring as well, we'll need to update
* typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
- * and TXHI_ENTIRES to match, as well as update the TSO code below
+ * and TXHI_ENTRIES to match, as well as update the TSO code below
* to get the right DMA address
*/
txRing = &tp->txLoRing;
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 9d3b51c3ef5..29a756dd979 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
- pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
+ pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 6fd0bf73683..8dfdfbd5966 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
unsigned long flags;
/* Note : you may have realised that, as this is a SET operation,
- * this is priviledged and therefore a normal user can't
+ * this is privileged and therefore a normal user can't
* perform scanning.
* This is not an error, while the device perform scanning,
* traffic doesn't flow, so it's a perfect DoS...
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index e5bb9f5ae42..989599ad33e 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
- /* if it is to big, trunk it */
+ /* if it is too big, trunk it */
dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else {
dwrq->flags = 0;
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index b41d666fea3..bfa0cc319a0 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -22,6 +22,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
+#include <linux/dma-mapping.h>
#include "prismcompat.h"
#include "islpci_dev.h"
@@ -124,7 +125,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* enable PCI DMA */
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 17:49:06 +0000