diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 114 |
1 files changed, 70 insertions, 44 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index f9d16ca5b3d..e05faa004da 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2390,39 +2390,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->ibss_beacon = ieee80211_beacon_get(hw, vif); } - if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) { - /* If there is currently a HW scan going on in the background - * then we need to cancel it else the RXON below will fail. */ + if (changes & BSS_CHANGED_BEACON_INT) { + priv->beacon_int = bss_conf->beacon_int; + /* TODO: in AP mode, do something to make this take effect */ + } + + if (changes & BSS_CHANGED_BSSID) { + IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid); + + /* + * If there is currently a HW scan going on in the + * background then we need to cancel it else the RXON + * below/in post_associate will fail. + */ if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress " - "after 100ms\n"); + IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); mutex_unlock(&priv->mutex); return; } - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - /* TODO: Audit driver for usage of these members and see - * if mac80211 deprecates them (priv->bssid looks like it - * shouldn't be there, but I haven't scanned the IBSS code - * to verify) - jpk */ - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + /* mac80211 only sets assoc when in STATION mode */ + if (priv->iw_mode == NL80211_IFTYPE_ADHOC || + bss_conf->assoc) { + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); - if (priv->iw_mode == NL80211_IFTYPE_AP) - iwlcore_config_ap(priv); - else { - int rc = iwlcore_commit_rxon(priv); - if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc) - iwl_rxon_add_station( - priv, priv->active_rxon.bssid_addr, 1); + /* currently needed in a few places */ + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + } else { + priv->staging_rxon.filter_flags &= + ~RXON_FILTER_ASSOC_MSK; } - } else if (!iwl_is_rfkill(priv)) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv); + } + /* + * This needs to be after setting the BSSID in case + * mac80211 decides to do both changes at once because + * it will invoke post_associate. + */ if (priv->iw_mode == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON) { struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); @@ -2431,8 +2438,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, iwl_mac_beacon_update(hw, beacon); } - mutex_unlock(&priv->mutex); - if (changes & BSS_CHANGED_ERP_PREAMBLE) { IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", bss_conf->use_short_preamble); @@ -2450,6 +2455,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; } + if (changes & BSS_CHANGED_BASIC_RATES) { + /* XXX use this information + * + * To do that, remove code from iwl_set_rate() and put something + * like this here: + * + if (A-band) + priv->staging_rxon.ofdm_basic_rates = + bss_conf->basic_rates; + else + priv->staging_rxon.ofdm_basic_rates = + bss_conf->basic_rates >> 4; + priv->staging_rxon.cck_basic_rates = + bss_conf->basic_rates & 0xF; + */ + } + if (changes & BSS_CHANGED_HT) { iwl_ht_conf(priv, bss_conf); @@ -2459,10 +2481,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, if (changes & BSS_CHANGED_ASSOC) { IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); - /* This should never happen as this function should - * never be called from interrupt context. */ - if (WARN_ON_ONCE(in_interrupt())) - return; if (bss_conf->assoc) { priv->assoc_id = bss_conf->aid; priv->beacon_int = bss_conf->beacon_int; @@ -2470,27 +2488,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, priv->timestamp = bss_conf->timestamp; priv->assoc_capability = bss_conf->assoc_capability; - /* we have just associated, don't start scan too early - * leave time for EAPOL exchange to complete + /* + * We have just associated, don't start scan too early + * leave time for EAPOL exchange to complete. + * + * XXX: do this in mac80211 */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - mutex_lock(&priv->mutex); - priv->cfg->ops->lib->post_associate(priv); - mutex_unlock(&priv->mutex); - } else { + if (!iwl_is_rfkill(priv)) + priv->cfg->ops->lib->post_associate(priv); + } else priv->assoc_id = 0; - IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc); + + } + + if (changes && iwl_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n", + changes); + ret = iwl_send_rxon_assoc(priv); + if (!ret) { + /* Sync active_rxon with latest change. */ + memcpy((void *)&priv->active_rxon, + &priv->staging_rxon, + sizeof(struct iwl_rxon_cmd)); } - } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { - IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes); - ret = iwl_send_rxon_assoc(priv); - if (!ret) - /* Sync active_rxon with latest change. */ - memcpy((void *)&priv->active_rxon, - &priv->staging_rxon, - sizeof(struct iwl_rxon_cmd)); } + + mutex_unlock(&priv->mutex); + IWL_DEBUG_MAC80211(priv, "leave\n"); } EXPORT_SYMBOL(iwl_bss_info_changed); |