diff options
Diffstat (limited to 'drivers/net')
107 files changed, 56030 insertions, 2009 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 07746b95fd8..455ba915ede 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -973,6 +973,11 @@ static int vortex_suspend (struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); vortex_down(dev, 1); } + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + free_irq(dev->irq, dev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); } return 0; } @@ -980,8 +985,19 @@ static int vortex_suspend (struct pci_dev *pdev, pm_message_t state) static int vortex_resume (struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + struct vortex_private *vp = netdev_priv(dev); - if (dev && dev->priv) { + if (dev && vp) { + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_device(pdev); + pci_set_master(pdev); + if (request_irq(dev->irq, vp->full_bus_master_rx ? + &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev)) { + printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq); + pci_disable_device(pdev); + return -EBUSY; + } if (netif_running(dev)) { vortex_up(dev); netif_device_attach(dev); @@ -1873,6 +1889,7 @@ vortex_timer(unsigned long data) { spin_lock_bh(&vp->lock); mii_status = mdio_read(dev, vp->phys[0], 1); + mii_status = mdio_read(dev, vp->phys[0], 1); ok = 1; if (vortex_debug > 2) printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n", diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 79e8aa6f2b9..6bb9232514b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -397,7 +397,7 @@ config SUN3LANCE If you're not building a kernel for a Sun 3, say N. config SUN3_82586 - tristate "Sun3 on-board Intel 82586 support" + bool "Sun3 on-board Intel 82586 support" depends on NET_ETHERNET && SUN3 help This driver enables support for the on-board Intel 82586 based @@ -447,7 +447,7 @@ config NET_SB1250_MAC config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" - depends on NET_ETHERNET && PCI && SGI_IP27 + depends on NET_ETHERNET && PCI && SGI_IP27 && BROKEN select CRC32 select MII help @@ -1923,6 +1923,20 @@ config R8169_VLAN If in doubt, say Y. +config SIS190 + tristate "SiS190/SiS191 gigabit ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or + a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to + appear in lan on motherboard designs which are based on SiS 965 + and SiS 966 south bridge. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. + config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL @@ -2044,6 +2058,13 @@ config BNX2 To compile this driver as a module, choose M here: the module will be called bnx2. This is recommended. +config SPIDER_NET + tristate "Spider Gigabit Ethernet driver" + depends on PCI && PPC_BPA + help + This driver supports the Gigabit Ethernet chips present on the + Cell Processor-Based Blades from IBM. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx @@ -2093,6 +2114,25 @@ endmenu menu "Ethernet (10000 Mbit)" depends on !UML +config CHELSIO_T1 + tristate "Chelsio 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio N110 and N210 models 10Gb Ethernet + cards. More information about adapter features and performance + tuning is in <file:Documentation/networking/cxgb.txt>. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.htm>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module, choose M here: the module + will be called cxgb. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a369ae284a9..8645c843cf4 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ +obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o @@ -42,6 +43,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o +obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ACENIC) += acenic.o @@ -52,6 +54,8 @@ obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_BNX2) += bnx2.o +spidernet-y += spider_net.o spider_net_ethtool.o sungem_phy.o +obj-$(CONFIG_SPIDER_NET) += spidernet.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SK98LIN) += sk98lin/ diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 91791ba3776..8a0af5453e2 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -275,7 +275,7 @@ static int __init ac_probe1(int ioaddr, struct net_device *dev) return 0; out2: if (ei_status.reg0) - iounmap((void *)dev->mem_start); + iounmap(ei_status.mem); out1: free_irq(dev->irq, dev); out: diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 4f9f69e22c1..12ef52c193a 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -597,7 +597,7 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) struct ArcProto *proto; int txbuf; unsigned long flags; - int freeskb = 0; + int freeskb, retval; BUGMSG(D_DURING, "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", @@ -615,7 +615,7 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) if (skb->len - ARC_HDR_SIZE > XMTU && !proto->continue_tx) { BUGMSG(D_NORMAL, "fixme: packet too large: compensating badly!\n"); dev_kfree_skb(skb); - return 0; /* don't try again */ + return NETDEV_TX_OK; /* don't try again */ } /* We're busy transmitting a packet... */ @@ -623,8 +623,11 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); AINTMASK(0); - - txbuf = get_arcbuf(dev); + if(lp->next_tx == -1) + txbuf = get_arcbuf(dev); + else { + txbuf = -1; + } if (txbuf != -1) { if (proto->prepare_tx(dev, pkt, skb->len, txbuf) && !proto->ack_tx) { @@ -638,6 +641,8 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) lp->outgoing.skb = skb; lp->outgoing.pkt = pkt; + freeskb = 0; + if (proto->continue_tx && proto->continue_tx(dev, txbuf)) { BUGMSG(D_NORMAL, @@ -645,10 +650,12 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) "(proto='%c')\n", proto->suffix); } } - + retval = NETDEV_TX_OK; + dev->trans_start = jiffies; lp->next_tx = txbuf; } else { - freeskb = 1; + retval = NETDEV_TX_BUSY; + freeskb = 0; } BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__FUNCTION__,ASTATUS()); @@ -664,7 +671,7 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev) if (freeskb) { dev_kfree_skb(skb); } - return 0; /* no need to try again */ + return retval; /* no need to try again */ } @@ -690,7 +697,6 @@ static int go_tx(struct net_device *dev) /* start sending */ ACOMMAND(TXcmd | (lp->cur_tx << 3)); - dev->trans_start = jiffies; lp->stats.tx_packets++; lp->lasttrans_dest = lp->lastload_dest; lp->lastload_dest = 0; @@ -917,6 +923,9 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id, struct pt_regs *regs) BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n", status); + /* MYRECON bit is at bit 7 of diagstatus */ + if(diagstatus & 0x80) + BUGMSG(D_RECON,"Put out that recon myself\n"); /* is the RECON info empty or old? */ if (!lp->first_recon || !lp->last_recon || diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index ad011214c7f..e01b6a78ec6 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -235,7 +235,7 @@ struct lance_private { #define MEM lp->mem #define DREG IO->data #define AREG IO->addr -#define REGA(a) ( AREG = (a), DREG ) +#define REGA(a) (*( AREG = (a), &DREG )) /* Definitions for packet buffer access: */ #define PKT_BUF_SZ 1544 diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 7babf6af4e2..55a72c7ad00 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -2004,14 +2004,14 @@ bnx2_init_cpus(struct bnx2 *bp) } static int -bnx2_set_power_state(struct bnx2 *bp, int state) +bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) { u16 pmcsr; pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); switch (state) { - case 0: { + case PCI_D0: { u32 val; pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, @@ -2032,7 +2032,7 @@ bnx2_set_power_state(struct bnx2 *bp, int state) REG_WR(bp, BNX2_RPM_CONFIG, val); break; } - case 3: { + case PCI_D3hot: { int i; u32 val, wol_msg; @@ -3886,7 +3886,7 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = dev->priv; int rc; - bnx2_set_power_state(bp, 0); + bnx2_set_power_state(bp, PCI_D0); bnx2_disable_int(bp); rc = bnx2_alloc_mem(bp); @@ -4197,7 +4197,7 @@ bnx2_close(struct net_device *dev) bnx2_free_mem(bp); bp->link_up = 0; netif_carrier_off(bp->dev); - bnx2_set_power_state(bp, 3); + bnx2_set_power_state(bp, PCI_D3hot); return 0; } @@ -5203,7 +5203,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); - bnx2_set_power_state(bp, 0); + bnx2_set_power_state(bp, PCI_D0); bp->chip_id = REG_RD(bp, BNX2_MISC_ID); @@ -5495,7 +5495,7 @@ bnx2_remove_one(struct pci_dev *pdev) } static int -bnx2_suspend(struct pci_dev *pdev, u32 state) +bnx2_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); struct bnx2 *bp = dev->priv; @@ -5513,7 +5513,7 @@ bnx2_suspend(struct pci_dev *pdev, u32 state) reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; bnx2_reset_chip(bp, reset_code); bnx2_free_skbs(bp); - bnx2_set_power_state(bp, state); + bnx2_set_power_state(bp, pci_choose_state(pdev, state)); return 0; } @@ -5526,7 +5526,7 @@ bnx2_resume(struct pci_dev *pdev) if (!netif_running(dev)) return 0; - bnx2_set_power_state(bp, 0); + bnx2_set_power_state(bp, PCI_D0); netif_device_attach(dev); bnx2_init_nic(bp); bnx2_netif_start(bp); diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile new file mode 100644 index 00000000000..91e927827c4 --- /dev/null +++ b/drivers/net/chelsio/Makefile @@ -0,0 +1,11 @@ +# +# Chelsio 10Gb NIC driver for Linux. +# + +obj-$(CONFIG_CHELSIO_T1) += cxgb.o + +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) + + +cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o + diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h new file mode 100644 index 00000000000..bf3e7b6a7a1 --- /dev/null +++ b/drivers/net/chelsio/common.h @@ -0,0 +1,314 @@ +/***************************************************************************** + * * + * File: common.h * + * $Revision: 1.21 $ * + * $Date: 2005/06/22 00:43:25 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_COMMON_H_ +#define _CXGB_COMMON_H_ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <linux/init.h> +#include <asm/io.h> +#include <linux/pci_ids.h> + +#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" +#define DRV_NAME "cxgb" +#define DRV_VERSION "2.1.1" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +typedef struct adapter adapter_t; + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = NULL; + + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#define MAX_NPORTS 4 + +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff + +enum { + CHBT_BOARD_N110, + CHBT_BOARD_N210 +}; + +enum { + CHBT_TERM_T1, + CHBT_TERM_T2 +}; + +enum { + CHBT_MAC_PM3393, +}; + +enum { + CHBT_PHY_88X2010, +}; + +enum { + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 +}; + +/* Revisions of T1 chip */ +enum { + TERM_T1A = 0, + TERM_T1B = 1, + TERM_T2 = 3 +}; + +struct sge_params { + unsigned int cmdQ_size[2]; + unsigned int freelQ_size[2]; + unsigned int large_buf_capacity; + unsigned int rx_coalesce_usecs; + unsigned int last_rx_coalesce_raw; + unsigned int default_rx_coalesce_usecs; + unsigned int sample_interval_usecs; + unsigned int coalesce_enable; + unsigned int polling; +}; + +struct chelsio_pci_params { + unsigned short speed; + unsigned char width; + unsigned char is_pcix; +}; + +struct adapter_params { + struct sge_params sge; + struct chelsio_pci_params pci; + + const struct board_info *brd_info; + + unsigned int nports; /* # of ethernet ports */ + unsigned int stats_update_period; + unsigned short chip_revision; + unsigned char chip_version; +}; + +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_duplex; /* duplex user has requested */ + unsigned char duplex; /* actual link duplex */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ +}; + +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct sge; +struct peespi; + +struct adapter { + u8 __iomem *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct peespi *espi; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + /* guards async operations */ + spinlock_t async_lock ____cacheline_aligned; + u32 slow_intr_mask; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = 1 << 0, + TSO_CAPABLE = 1 << 2, + TCP_CSUM_CAPABLE = 1 << 3, + UDP_CSUM_CAPABLE = 1 << 4, + VLAN_ACCEL_CAPABLE = 1 << 5, + RX_CSUM_ENABLED = 1 << 6, +}; + +struct mdio_ops; +struct gmac; +struct gphy; + +struct board_info { + unsigned char board; + unsigned char port_number; + unsigned long caps; + unsigned char chip_term; + unsigned char chip_mac; + unsigned char chip_phy; + unsigned int clock_core; + unsigned int clock_mc3; + unsigned int clock_mc4; + unsigned int espi_nports; + unsigned int clock_cspi; + unsigned int clock_elmer0; + unsigned char mdio_mdien; + unsigned char mdio_mdiinv; + unsigned char mdio_mdc; + unsigned char mdio_phybaseaddr; + struct gmac *gmac; + struct gphy *gphy; + struct mdio_ops *mdio_ops; + const char *desc; +}; + +extern struct pci_device_id t1_pci_tbl[]; + +static inline int adapter_matches_type(const adapter_t *adapter, + int version, int revision) +{ + return adapter->params.chip_version == version && + adapter->params.chip_revision == revision; +} + +#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B) +#define is_T2(adap) adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2) + +/* Returns true if an adapter supports VLAN acceleration and TSO */ +static inline int vlan_tso_capable(const adapter_t *adapter) +{ + return !t1_is_T1B(adapter); +} + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; ++iter) + +#define board_info(adapter) ((adapter)->params.brd_info) +#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full) + +static inline unsigned int core_ticks_per_usec(const adapter_t *adap) +{ + return board_info(adap)->clock_core / 1000000; +} + +extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); + +extern void t1_interrupts_enable(adapter_t *adapter); +extern void t1_interrupts_disable(adapter_t *adapter); +extern void t1_interrupts_clear(adapter_t *adapter); +extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_slow_intr_handler(adapter_t *adapter); + +extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +extern const struct board_info *t1_get_board_info(unsigned int board_id); +extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid, + unsigned short ssid); +extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p); +extern int t1_init_hw_modules(adapter_t *adapter); +extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +extern void t1_free_sw_modules(adapter_t *adapter); +extern void t1_fatal_err(adapter_t *adapter); + +extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); + +#endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h new file mode 100644 index 00000000000..3412342f734 --- /dev/null +++ b/drivers/net/chelsio/cphy.h @@ -0,0 +1,148 @@ +/***************************************************************************** + * * + * File: cphy.h * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_CPHY_H_ +#define _CXGB_CPHY_H_ + +#include "common.h" + +struct mdio_ops { + void (*init)(adapter_t *adapter, const struct board_info *bi); + int (*read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +/* PHY interrupt types */ +enum { + cphy_cause_link_change = 0x1, + cphy_cause_error = 0x2 +}; + +struct cphy; + +/* PHY operations */ +struct cphy_ops { + void (*destroy)(struct cphy *); + int (*reset)(struct cphy *, int wait); + + int (*interrupt_enable)(struct cphy *); + int (*interrupt_disable)(struct cphy *); + int (*interrupt_clear)(struct cphy *); + int (*interrupt_handler)(struct cphy *); + + int (*autoneg_enable)(struct cphy *); + int (*autoneg_disable)(struct cphy *); + int (*autoneg_restart)(struct cphy *); + + int (*advertise)(struct cphy *phy, unsigned int advertise_map); + int (*set_loopback)(struct cphy *, int on); + int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex); + int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed, + int *duplex, int *fc); +}; + +/* A PHY instance */ +struct cphy { + int addr; /* PHY address */ + adapter_t *adapter; /* associated adapter */ + struct cphy_ops *ops; /* PHY operations */ + int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); + struct cphy_instance *instance; +}; + +/* Convenience MDIO read/write wrappers */ +static inline int mdio_read(struct cphy *cphy, int mmd, int reg, + unsigned int *valp) +{ + return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp); +} + +static inline int mdio_write(struct cphy *cphy, int mmd, int reg, + unsigned int val) +{ + return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val); +} + +static inline int simple_mdio_read(struct cphy *cphy, int reg, + unsigned int *valp) +{ + return mdio_read(cphy, 0, reg, valp); +} + +static inline int simple_mdio_write(struct cphy *cphy, int reg, + unsigned int val) +{ + return mdio_write(cphy, 0, reg, val); +} + +/* Convenience initializer */ +static inline void cphy_init(struct cphy *phy, adapter_t *adapter, + int phy_addr, struct cphy_ops *phy_ops, + struct mdio_ops *mdio_ops) +{ + phy->adapter = adapter; + phy->addr = phy_addr; + phy->ops = phy_ops; + if (mdio_ops) { + phy->mdio_read = mdio_ops->read; + phy->mdio_write = mdio_ops->write; + } +} + +/* Operations of the PHY-instance factory */ +struct gphy { + /* Construct a PHY instance with the given PHY address */ + struct cphy *(*create)(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops); + + /* + * Reset the PHY chip. This resets the whole PHY chip, not individual + * ports. + */ + int (*reset)(adapter_t *adapter); +}; + +extern struct gphy t1_mv88x201x_ops; +extern struct gphy t1_dummy_phy_ops; + +#endif /* _CXGB_CPHY_H_ */ diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h new file mode 100644 index 00000000000..27925e487bc --- /dev/null +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -0,0 +1,145 @@ +/***************************************************************************** + * * + * File: cpl5_cmd.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_CPL5_CMD_H_ +#define _CXGB_CPL5_CMD_H_ + +#include <asm/byteorder.h> + +#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD) +#error "Adjust your <asm/byteorder.h> defines" +#endif + +enum CPL_opcode { + CPL_RX_PKT = 0xAD, + CPL_TX_PKT = 0xB2, + CPL_TX_PKT_LSO = 0xB6, +}; + +enum { /* TX_PKT_LSO ethernet types */ + CPL_ETH_II, + CPL_ETH_II_VLAN, + CPL_ETH_802_3, + CPL_ETH_802_3_VLAN +}; + +struct cpl_rx_data { + u32 rsvd0; + u32 len; + u32 seq; + u16 urg; + u8 rsvd1; + u8 status; +}; + +/* + * We want this header's alignment to be no more stringent than 2-byte aligned. + * All fields are u8 or u16 except for the length. However that field is not + * used so we break it into 2 16-bit parts to easily meet our alignment needs. + */ +struct cpl_tx_pkt { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; +#endif + u16 vlan; + u16 len_hi; + u16 len_lo; +}; + +struct cpl_tx_pkt_lso { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; +#endif + u16 vlan; + u32 len; + + u32 rsvd2; + u8 rsvd3; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; +#else + u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; +#endif + u16 eth_type_mss; +}; + +struct cpl_rx_pkt { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 csum_valid:1; + u8 bad_pkt:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 bad_pkt:1; + u8 csum_valid:1; + u8 iff:4; +#endif + u16 csum; + u16 vlan; + u16 len; +}; + +#endif /* _CXGB_CPL5_CMD_H_ */ diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c new file mode 100644 index 00000000000..349ebe783ed --- /dev/null +++ b/drivers/net/chelsio/cxgb2.c @@ -0,0 +1,1256 @@ +/***************************************************************************** + * * + * File: cxgb2.c * + * $Revision: 1.25 $ * + * $Date: 2005/06/22 00:43:25 $ * + * Description: * + * Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/mii.h> +#include <linux/sockios.h> +#include <linux/proc_fs.h> +#include <linux/dma-mapping.h> +#include <asm/uaccess.h> + +#include "cpl5_cmd.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "espi.h" + +#ifdef work_struct +#include <linux/tqueue.h> +#define INIT_WORK INIT_TQUEUE +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + del_timer_sync(&ap->stats_update_timer); + flush_scheduled_tasks(); +} + +/* + * Stats update timer for 2.4. It schedules a task to do the actual update as + * we need to access MAC statistics in process context. + */ +static void mac_stats_timer(unsigned long data) +{ + struct adapter *ap = (struct adapter *)data; + + schedule_task(&ap->stats_update_task); +} +#else +#include <linux/workqueue.h> + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} +#endif + +#define MAX_CMDQ_ENTRIES 16384 +#define MAX_CMDQ1_ENTRIES 1024 +#define MAX_RX_BUFFERS 16384 +#define MAX_RX_JUMBO_BUFFERS 16384 +#define MAX_TX_BUFFERS_HIGH 16384U +#define MAX_TX_BUFFERS_LOW 1536U +#define MIN_FL_ENTRIES 32 + +#define PORT_MASK ((1 << MAX_NPORTS) - 1) + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +/* + * The EEPROM is actually bigger but only the first few bytes are used so we + * only report those. + */ +#define EEPROM_SIZE 32 + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("GPL"); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +MODULE_PARM(dflt_msg_enable, "i"); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); + + +static const char pci_speed[][4] = { + "33", "66", "100", "133" +}; + +/* + * Setup MAC to receive the types of packets we want. + */ +static void t1_set_rxmode(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct t1_rx_mode rm; + + rm.dev = dev; + rm.idx = 0; + rm.list = dev->mc_list; + mac->ops->set_rx_mode(mac, &rm); +} + +static void link_report(struct port_info *p) +{ + if (!netif_carrier_ok(p->dev)) + printk(KERN_INFO "%s: link down\n", p->dev->name); + else { + const char *s = "10Mbps"; + + switch (p->link_config.speed) { + case SPEED_10000: s = "10Gbps"; break; + case SPEED_1000: s = "1000Mbps"; break; + case SPEED_100: s = "100Mbps"; break; + } + + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", + p->dev->name, s, + p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + } +} + +void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, + int speed, int duplex, int pause) +{ + struct port_info *p = &adapter->port[port_id]; + + if (link_stat != netif_carrier_ok(p->dev)) { + if (link_stat) + netif_carrier_on(p->dev); + else + netif_carrier_off(p->dev); + link_report(p); + + } +} + +static void link_start(struct port_info *p) +{ + struct cmac *mac = p->mac; + + mac->ops->reset(mac); + if (mac->ops->macaddress_set) + mac->ops->macaddress_set(mac, p->dev->dev_addr); + t1_set_rxmode(p->dev); + t1_link_start(p->phy, mac, &p->link_config); + mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); +} + +static void enable_hw_csum(struct adapter *adapter) +{ + if (adapter->flags & TSO_CAPABLE) + t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ + t1_tp_set_tcp_checksum_offload(adapter, 1); +} + +/* + * Things to do upon first use of a card. + * This must run with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adapter) +{ + int err = 0; + + if (!(adapter->flags & FULL_INIT_DONE)) { + err = t1_init_hw_modules(adapter); + if (err) + goto out_err; + + enable_hw_csum(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + t1_interrupts_clear(adapter); + if ((err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), SA_SHIRQ, + adapter->name, adapter))) { + goto out_err; + } + t1_sge_start(adapter->sge); + t1_interrupts_enable(adapter); + out_err: + return err; +} + +/* + * Release resources when all the ports have been stopped. + */ +static void cxgb_down(struct adapter *adapter) +{ + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + free_irq(adapter->pdev->irq, adapter); +} + +static int cxgb_open(struct net_device *dev) +{ + int err; + struct adapter *adapter = dev->priv; + int other_ports = adapter->open_device_map & PORT_MASK; + + if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) + return err; + + __set_bit(dev->if_port, &adapter->open_device_map); + link_start(&adapter->port[dev->if_port]); + netif_start_queue(dev); + if (!other_ports && adapter->params.stats_update_period) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + return 0; +} + +static int cxgb_close(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct cmac *mac = p->mac; + + netif_stop_queue(dev); + mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); + netif_carrier_off(dev); + + clear_bit(dev->if_port, &adapter->open_device_map); + if (adapter->params.stats_update_period && + !(adapter->open_device_map & PORT_MASK)) { + /* Stop statistics accumulation. */ + smp_mb__after_clear_bit(); + spin_lock(&adapter->work_lock); /* sync with update task */ + spin_unlock(&adapter->work_lock); + cancel_mac_stats_update(adapter); + } + + if (!adapter->open_device_map) + cxgb_down(adapter); + return 0; +} + +static struct net_device_stats *t1_get_stats(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct net_device_stats *ns = &p->netstats; + const struct cmac_statistics *pstats; + + /* Do a full update of the MAC stats */ + pstats = p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FULL); + + ns->tx_packets = pstats->TxUnicastFramesOK + + pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; + + ns->rx_packets = pstats->RxUnicastFramesOK + + pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; + + ns->tx_bytes = pstats->TxOctetsOK; + ns->rx_bytes = pstats->RxOctetsOK; + + ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + + pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; + ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + + pstats->RxFCSErrors + pstats->RxAlignErrors + + pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + + pstats->RxSymbolErrors + pstats->RxRuntErrors; + + ns->multicast = pstats->RxMulticastFramesOK; + ns->collisions = pstats->TxTotalCollisions; + + /* detailed rx_errors */ + ns->rx_length_errors = pstats->RxFrameTooLongErrors + + pstats->RxJabberErrors; + ns->rx_over_errors = 0; + ns->rx_crc_errors = pstats->RxFCSErrors; + ns->rx_frame_errors = pstats->RxAlignErrors; + ns->rx_fifo_errors = 0; + ns->rx_missed_errors = 0; + + /* detailed tx_errors */ + ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = pstats->TxUnderrun; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = pstats->TxLateCollisions; + return ns; +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return adapter->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct adapter *adapter = dev->priv; + + adapter->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + "TSO", + "VLANextractions", + "VLANinsertions", + "RxCsumGood", + "TxCsumOffload", + "RxDrops" + + "respQ_empty", + "respQ_overflow", + "freelistQ_empty", + "pkt_too_big", + "pkt_mismatch", + "cmdQ_full0", + "cmdQ_full1", + "tx_ipfrags", + "tx_reg_pkts", + "tx_lso_pkts", + "tx_do_cksum", + + "espi_DIP2ParityErr", + "espi_DIP4Err", + "espi_RxDrops", + "espi_TxDrops", + "espi_RxOvfl", + "espi_ParityErr" +}; + +#define T2_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T2_REGMAP_SIZE; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct adapter *adapter = dev->priv; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(adapter->pdev)); +} + +static int get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(stats_strings); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + const struct cmac_statistics *s; + const struct sge_port_stats *ss; + const struct sge_intr_counts *t; + + s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); + t = t1_sge_get_intr_counts(adapter->sge); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + *data++ = ss->tso; + *data++ = ss->vlan_xtract; + *data++ = ss->vlan_insert; + *data++ = ss->rx_cso_good; + *data++ = ss->tx_cso; + *data++ = ss->rx_drops; + + *data++ = (u64)t->respQ_empty; + *data++ = (u64)t->respQ_overflow; + *data++ = (u64)t->freelistQ_empty; + *data++ = (u64)t->pkt_too_big; + *data++ = (u64)t->pkt_mismatch; + *data++ = (u64)t->cmdQ_full[0]; + *data++ = (u64)t->cmdQ_full[1]; + *data++ = (u64)t->tx_ipfrags; + *data++ = (u64)t->tx_reg_pkts; + *data++ = (u64)t->tx_lso_pkts; + *data++ = (u64)t->tx_do_cksum; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = readl(ap->regs + start); +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: bits 0..9: chip version, bits 10..15: chip revision + */ + regs->version = 2; + + memset(buf, 0, T2_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + cmd->supported = p->link_config.supported; + cmd->advertising = p->link_config.advertising; + + if (netif_carrier_ok(dev)) { + cmd->speed = p->link_config.speed; + cmd->duplex = p->link_config.duplex; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static int speed_duplex_to_caps(int speed, int duplex) +{ + int cap = 0; + + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10baseT_Full; + else + cap = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_100baseT_Full; + else + cap = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_1000baseT_Full; + else + cap = SUPPORTED_1000baseT_Half; + break; + case SPEED_10000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10000baseT_Full; + } + return cap; +} + +#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ + ADVERTISED_10000baseT_Full) + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (!(lc->supported & SUPPORTED_Autoneg)) + return -EOPNOTSUPP; /* can't change speed/duplex */ + + if (cmd->autoneg == AUTONEG_DISABLE) { + int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); + + if (!(lc->supported & cap) || cmd->speed == SPEED_1000) + return -EINVAL; + lc->requested_speed = cmd->speed; + lc->requested_duplex = cmd->duplex; + lc->advertising = 0; + } else { + cmd->advertising &= ADVERTISED_MASK; + if (cmd->advertising & (cmd->advertising - 1)) + cmd->advertising = lc->supported; + cmd->advertising &= lc->supported; + if (!cmd->advertising) + return -EINVAL; + lc->requested_speed = SPEED_INVALID; + lc->requested_duplex = DUPLEX_INVALID; + lc->advertising = cmd->advertising | ADVERTISED_Autoneg; + } + lc->autoneg = cmd->autoneg; + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & SUPPORTED_Autoneg) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (lc->autoneg == AUTONEG_ENABLE) { + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + } else { + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + if (netif_running(dev)) + p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, + lc->fc); + } + return 0; +} + +static u32 get_rx_csum(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return (adapter->flags & RX_CSUM_ENABLED) != 0; +} + +static int set_rx_csum(struct net_device *dev, u32 data) +{ + struct adapter *adapter = dev->priv; + + if (data) + adapter->flags |= RX_CSUM_ENABLED; + else + adapter->flags &= ~RX_CSUM_ENABLED; + return 0; +} + +static int set_tso(struct net_device *dev, u32 value) +{ + struct adapter *adapter = dev->priv; + + if (!(adapter->flags & TSO_CAPABLE)) + return value ? -EOPNOTSUPP : 0; + return ethtool_op_set_tso(dev, value); +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = 0; + e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; + e->tx_max_pending = MAX_CMDQ_ENTRIES; + + e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; + e->rx_mini_pending = 0; + e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; + e->tx_pending = adapter->params.sge.cmdQ_size[0]; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || + e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || + e->tx_pending > MAX_CMDQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || + e->rx_jumbo_pending < MIN_FL_ENTRIES || + e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; + adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; + adapter->params.sge.cmdQ_size[0] = e->tx_pending; + adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? + MAX_CMDQ1_ENTRIES : e->tx_pending; + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + /* + * If RX coalescing is requested we use NAPI, otherwise interrupts. + * This choice can be made only when all ports and the TOE are off. + */ + if (adapter->open_device_map == 0) + adapter->params.sge.polling = c->use_adaptive_rx_coalesce; + + if (adapter->params.sge.polling) { + adapter->params.sge.rx_coalesce_usecs = 0; + } else { + adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; + } + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; + adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; + t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); + return 0; +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; + c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; + c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; + return 0; +} + +static int get_eeprom_len(struct net_device *dev) +{ + return EEPROM_SIZE; +} + +#define EEPROM_MAGIC(ap) \ + (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 *data) +{ + int i; + u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); + struct adapter *adapter = dev->priv; + + e->magic = EEPROM_MAGIC(adapter); + for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) + t1_seeprom_read(adapter, i, (u32 *)&buf[i]); + memcpy(data, buf + e->offset, e->len); + return 0; +} + +static struct ethtool_ops t1_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_rx_csum = get_rx_csum, + .set_rx_csum = set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .get_stats_count = get_stats_count, + .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, + .get_tso = ethtool_op_get_tso, + .set_tso = set_tso, +}; + +static void cxgb_proc_cleanup(struct adapter *adapter, + struct proc_dir_entry *dir) +{ + const char *name; + name = adapter->name; + remove_proc_entry(name, dir); +} +//#define chtoe_setup_toedev(adapter) NULL +#define update_mtu_tab(adapter) +#define write_smt_entry(adapter, idx) + +static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = if_mii(req); + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + u32 val; + + if (!phy->mdio_read) + return -EOPNOTSUPP; + phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, + &val); + data->val_out = val; + break; + } + case SIOCSMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; + phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, + data->val_in); + break; + } + + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + + if (!mac->ops->set_mtu) + return -EOPNOTSUPP; + if (new_mtu < 68) + return -EINVAL; + if ((ret = mac->ops->set_mtu(mac, new_mtu))) + return ret; + dev->mtu = new_mtu; + return 0; +} + +static int t1_set_mac_addr(struct net_device *dev, void *p) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct sockaddr *addr = p; + + if (!mac->ops->macaddress_set) + return -EOPNOTSUPP; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + mac->ops->macaddress_set(mac, dev->dev_addr); + return 0; +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +static void vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + adapter->vlan_grp = grp; + t1_set_vlan_accel(adapter, grp != NULL); + spin_unlock_irq(&adapter->async_lock); +} + +static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + if (adapter->vlan_grp) + adapter->vlan_grp->vlan_devices[vid] = NULL; + spin_unlock_irq(&adapter->async_lock); +} +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void t1_netpoll(struct net_device *dev) +{ + unsigned long flags; + struct adapter *adapter = dev->priv; + + local_irq_save(flags); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); + local_irq_restore(flags); +} +#endif + +/* + * Periodic accumulation of MAC statistics. This is used only if the MAC + * does not have any other way to prevent stats counter overflow. + */ +static void mac_stats_task(void *data) +{ + int i; + struct adapter *adapter = data; + + for_each_port(adapter, i) { + struct port_info *p = &adapter->port[i]; + + if (netif_running(p->dev)) + p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FAST); + } + + /* Schedule the next statistics update if any port is active. */ + spin_lock(&adapter->work_lock); + if (adapter->open_device_map & PORT_MASK) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + spin_unlock(&adapter->work_lock); +} + +/* + * Processes elmer0 external interrupts in process context. + */ +static void ext_intr_task(void *data) +{ + struct adapter *adapter = data; + + elmer0_ext_intr_handler(adapter); + + /* Now reenable external interrupts */ + spin_lock_irq(&adapter->async_lock); + adapter->slow_intr_mask |= F_PL_INTR_EXT; + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); +} + +/* + * Interrupt-context handler for elmer0 external interrupts. + */ +void t1_elmer0_ext_intr(struct adapter *adapter) +{ + /* + * Schedule a task to handle external interrupts as we require + * a process context. We disable EXT interrupts in the interim + * and let the task reenable them when it's done. + */ + adapter->slow_intr_mask &= ~F_PL_INTR_EXT; + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + schedule_work(&adapter->ext_intr_handler_task); +} + +void t1_fatal_err(struct adapter *adapter) +{ + if (adapter->flags & FULL_INIT_DONE) { + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + } + CH_ALERT("%s: encountered fatal error, operation suspended\n", + adapter->name); +} + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int i, err, pci_using_dac = 0; + unsigned long mmio_start, mmio_len; + const struct board_info *bi; + struct adapter *adapter = NULL; + struct port_info *pi; + + if (!version_printed) { + printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, + DRV_VERSION); + ++version_printed; + } + + err = pci_enable_device(pdev); + if (err) + return err; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + CH_ERR("%s: cannot find PCI device memory base address\n", + pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { + CH_ERR("%s: unable to obtain 64-bit DMA for" + "consistent allocations\n", pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { + CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); + goto out_disable_pdev; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); + goto out_disable_pdev; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + bi = t1_get_board_info(ent->driver_data); + + for (i = 0; i < bi->port_number; ++i) { + struct net_device *netdev; + + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + if (!adapter) { + adapter = netdev->priv; + adapter->pdev = pdev; + adapter->port[0].dev = netdev; /* so we don't leak it */ + + adapter->regs = ioremap(mmio_start, mmio_len); + if (!adapter->regs) { + CH_ERR("%s: cannot map device registers\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_free_dev; + } + + if (t1_get_board_rev(adapter, bi, &adapter->params)) { + err = -ENODEV; /* Can't handle this chip rev */ + goto out_free_dev; + } + + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + adapter->mmio_len = mmio_len; + + init_MUTEX(&adapter->mib_mutex); + spin_lock_init(&adapter->tpi_lock); + spin_lock_init(&adapter->work_lock); + spin_lock_init(&adapter->async_lock); + + INIT_WORK(&adapter->ext_intr_handler_task, + ext_intr_task, adapter); + INIT_WORK(&adapter->stats_update_task, mac_stats_task, + adapter); +#ifdef work_struct + init_timer(&adapter->stats_update_timer); + adapter->stats_update_timer.function = mac_stats_timer; + adapter->stats_update_timer.data = + (unsigned long)adapter; +#endif + + pci_set_drvdata(pdev, netdev); + } + + pi = &adapter->port[i]; + pi->dev = netdev; + netif_carrier_off(netdev); + netdev->irq = pdev->irq; + netdev->if_port = i; + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len - 1; + netdev->priv = adapter; + netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_LLTX; + + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + if (vlan_tso_capable(adapter)) { +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + adapter->flags |= VLAN_ACCEL_CAPABLE; + netdev->features |= + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->vlan_rx_register = vlan_rx_register; + netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; +#endif + adapter->flags |= TSO_CAPABLE; + netdev->features |= NETIF_F_TSO; + } + + netdev->open = cxgb_open; + netdev->stop = cxgb_close; + netdev->hard_start_xmit = t1_start_xmit; + netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? + sizeof(struct cpl_tx_pkt_lso) : + sizeof(struct cpl_tx_pkt); + netdev->get_stats = t1_get_stats; + netdev->set_multicast_list = t1_set_rxmode; + netdev->do_ioctl = t1_ioctl; + netdev->change_mtu = t1_change_mtu; + netdev->set_mac_address = t1_set_mac_addr; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = t1_netpoll; +#endif + netdev->weight = 64; + + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + } + + if (t1_init_sw_modules(adapter, bi) < 0) { + err = -ENODEV; + goto out_free_dev; + } + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for (i = 0; i < bi->port_number; ++i) { + err = register_netdev(adapter->port[i].dev); + if (err) + CH_WARN("%s: cannot register net device %s, skipping\n", + pci_name(pdev), adapter->port[i].dev->name); + else { + /* + * Change the name we use for messages to the name of + * the first successfully registered interface. + */ + if (!adapter->registered_device_map) + adapter->name = adapter->port[i].dev->name; + + __set_bit(i, &adapter->registered_device_map); + } + } + if (!adapter->registered_device_map) { + CH_ERR("%s: could not register any net devices\n", + pci_name(pdev)); + goto out_release_adapter_res; + } + + printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, + bi->desc, adapter->params.chip_revision, + adapter->params.pci.is_pcix ? "PCIX" : "PCI", + adapter->params.pci.speed, adapter->params.pci.width); + return 0; + + out_release_adapter_res: + t1_free_sw_modules(adapter); + out_free_dev: + if (adapter) { + if (adapter->regs) iounmap(adapter->regs); + for (i = bi->port_number - 1; i >= 0; --i) + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } + } + pci_release_regions(pdev); + out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static inline void t1_sw_reset(struct pci_dev *pdev) +{ + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + int i; + struct adapter *adapter = dev->priv; + + for_each_port(adapter, i) + if (test_bit(i, &adapter->registered_device_map)) + unregister_netdev(adapter->port[i].dev); + + t1_free_sw_modules(adapter); + iounmap(adapter->regs); + while (--i >= 0) + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + t1_sw_reset(pdev); + } +} + +static struct pci_driver driver = { + .name = DRV_NAME, + .id_table = t1_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int __init t1_init_module(void) +{ + return pci_module_init(&driver); +} + +static void __exit t1_cleanup_module(void) +{ + pci_unregister_driver(&driver); +} + +module_init(t1_init_module); +module_exit(t1_cleanup_module); diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h new file mode 100644 index 00000000000..5590cb2dac1 --- /dev/null +++ b/drivers/net/chelsio/elmer0.h @@ -0,0 +1,151 @@ +/***************************************************************************** + * * + * File: elmer0.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 22:49:43 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_ELMER0_H_ +#define _CXGB_ELMER0_H_ + +/* ELMER0 registers */ +#define A_ELMER0_VERSION 0x100000 +#define A_ELMER0_PHY_CFG 0x100004 +#define A_ELMER0_INT_ENABLE 0x100008 +#define A_ELMER0_INT_CAUSE 0x10000c +#define A_ELMER0_GPI_CFG 0x100010 +#define A_ELMER0_GPI_STAT 0x100014 +#define A_ELMER0_GPO 0x100018 +#define A_ELMER0_PORT0_MI1_CFG 0x400000 + +#define S_MI1_MDI_ENABLE 0 +#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE) +#define F_MI1_MDI_ENABLE V_MI1_MDI_ENABLE(1U) + +#define S_MI1_MDI_INVERT 1 +#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT) +#define F_MI1_MDI_INVERT V_MI1_MDI_INVERT(1U) + +#define S_MI1_PREAMBLE_ENABLE 2 +#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE) +#define F_MI1_PREAMBLE_ENABLE V_MI1_PREAMBLE_ENABLE(1U) + +#define S_MI1_SOF 3 +#define M_MI1_SOF 0x3 +#define V_MI1_SOF(x) ((x) << S_MI1_SOF) +#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF) + +#define S_MI1_CLK_DIV 5 +#define M_MI1_CLK_DIV 0xff +#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV) +#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV) + +#define A_ELMER0_PORT0_MI1_ADDR 0x400004 + +#define S_MI1_REG_ADDR 0 +#define M_MI1_REG_ADDR 0x1f +#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR) +#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR) + +#define S_MI1_PHY_ADDR 5 +#define M_MI1_PHY_ADDR 0x1f +#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR) +#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR) + +#define A_ELMER0_PORT0_MI1_DATA 0x400008 + +#define S_MI1_DATA 0 +#define M_MI1_DATA 0xffff +#define V_MI1_DATA(x) ((x) << S_MI1_DATA) +#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA) + +#define A_ELMER0_PORT0_MI1_OP 0x40000c + +#define S_MI1_OP 0 +#define M_MI1_OP 0x3 +#define V_MI1_OP(x) ((x) << S_MI1_OP) +#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP) + +#define S_MI1_ADDR_AUTOINC 2 +#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC) +#define F_MI1_ADDR_AUTOINC V_MI1_ADDR_AUTOINC(1U) + +#define S_MI1_OP_BUSY 31 +#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY) +#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U) + +#define A_ELMER0_PORT1_MI1_CFG 0x500000 +#define A_ELMER0_PORT1_MI1_ADDR 0x500004 +#define A_ELMER0_PORT1_MI1_DATA 0x500008 +#define A_ELMER0_PORT1_MI1_OP 0x50000c +#define A_ELMER0_PORT2_MI1_CFG 0x600000 +#define A_ELMER0_PORT2_MI1_ADDR 0x600004 +#define A_ELMER0_PORT2_MI1_DATA 0x600008 +#define A_ELMER0_PORT2_MI1_OP 0x60000c +#define A_ELMER0_PORT3_MI1_CFG 0x700000 +#define A_ELMER0_PORT3_MI1_ADDR 0x700004 +#define A_ELMER0_PORT3_MI1_DATA 0x700008 +#define A_ELMER0_PORT3_MI1_OP 0x70000c + +/* Simple bit definition for GPI and GP0 registers. */ +#define ELMER0_GP_BIT0 0x0001 +#define ELMER0_GP_BIT1 0x0002 +#define ELMER0_GP_BIT2 0x0004 +#define ELMER0_GP_BIT3 0x0008 +#define ELMER0_GP_BIT4 0x0010 +#define ELMER0_GP_BIT5 0x0020 +#define ELMER0_GP_BIT6 0x0040 +#define ELMER0_GP_BIT7 0x0080 +#define ELMER0_GP_BIT8 0x0100 +#define ELMER0_GP_BIT9 0x0200 +#define ELMER0_GP_BIT10 0x0400 +#define ELMER0_GP_BIT11 0x0800 +#define ELMER0_GP_BIT12 0x1000 +#define ELMER0_GP_BIT13 0x2000 +#define ELMER0_GP_BIT14 0x4000 +#define ELMER0_GP_BIT15 0x8000 +#define ELMER0_GP_BIT16 0x10000 +#define ELMER0_GP_BIT17 0x20000 +#define ELMER0_GP_BIT18 0x40000 +#define ELMER0_GP_BIT19 0x80000 + +#define MI1_OP_DIRECT_WRITE 1 +#define MI1_OP_DIRECT_READ 2 + +#define MI1_OP_INDIRECT_ADDRESS 0 +#define MI1_OP_INDIRECT_WRITE 1 +#define MI1_OP_INDIRECT_READ_INC 2 +#define MI1_OP_INDIRECT_READ 3 + +#endif /* _CXGB_ELMER0_H_ */ diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c new file mode 100644 index 00000000000..230642571c9 --- /dev/null +++ b/drivers/net/chelsio/espi.c @@ -0,0 +1,346 @@ +/***************************************************************************** + * * + * File: espi.c * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * + * Description: * + * Ethernet SPI functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "espi.h" + +struct peespi { + adapter_t *adapter; + struct espi_intr_counts intr_cnt; + u32 misc_ctrl; + spinlock_t lock; +}; + +#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ + F_RAMPARITYERR | F_DIP2PARITYERR) +#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ + | F_MONITORED_INTERFACE) + +#define TRICN_CNFG 14 +#define TRICN_CMD_READ 0x11 +#define TRICN_CMD_WRITE 0x21 +#define TRICN_CMD_ATTEMPTS 10 + +static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, + int ch_addr, int reg_offset, u32 wr_data) +{ + int busy, attempts = TRICN_CMD_ATTEMPTS; + + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); + + do { + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + } while (busy && --attempts); + + if (busy) + CH_ERR("%s: TRICN write timed out\n", adapter->name); + + return busy; +} + +/* 1. Deassert rx_reset_core. */ +/* 2. Program TRICN_CNFG registers. */ +/* 3. Deassert rx_reset_link */ +static int tricn_init(adapter_t *adapter) +{ + int i = 0; + int sme = 1; + int stat = 0; + int timeout = 0; + int is_ready = 0; + int dynamic_deskew = 0; + + if (dynamic_deskew) + sme = 0; + + + /* 1 */ + timeout=1000; + do { + stat = readl(adapter->regs + A_ESPI_RX_RESET); + is_ready = (stat & 0x4); + timeout--; + udelay(5); + } while (!is_ready || (timeout==0)); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); + if (timeout==0) + { + CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); + t1_fatal_err(adapter); + } + + /* 2 */ + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80); + for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + + /* 3 */ + writel(0x3, adapter->regs + A_ESPI_RX_RESET); + + return 0; +} + +void t1_espi_intr_enable(struct peespi *espi) +{ + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + /* + * Cannot enable ESPI interrupts on T1B because HW asserts the + * interrupt incorrectly, namely the driver gets ESPI interrupts + * but no data is actually dropped (can verify this reading the ESPI + * drop registers). Also, once the ESPI interrupt is asserted it + * cannot be cleared (HW bug). + */ + enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +void t1_espi_intr_clear(struct peespi *espi) +{ + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); +} + +void t1_espi_intr_disable(struct peespi *espi) +{ + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +int t1_espi_intr_handler(struct peespi *espi) +{ + u32 cnt; + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); + + if (status & F_DIP4ERR) + espi->intr_cnt.DIP4_err++; + if (status & F_RXDROP) + espi->intr_cnt.rx_drops++; + if (status & F_TXDROP) + espi->intr_cnt.tx_drops++; + if (status & F_RXOVERFLOW) + espi->intr_cnt.rx_ovflw++; + if (status & F_RAMPARITYERR) + espi->intr_cnt.parity_err++; + if (status & F_DIP2PARITYERR) { + espi->intr_cnt.DIP2_parity_err++; + + /* + * Must read the error count to clear the interrupt + * that it causes. + */ + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); + return 0; +} + +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) +{ + return &espi->intr_cnt; +} + +static void espi_setup_for_pm3393(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); +} + +/* T2 Init part -- */ +/* 1. Set T_ESPI_MISCCTRL_ADDR */ +/* 2. Init ESPI registers. */ +/* 3. Init TriCN Hard Macro */ +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ + u32 cnt; + + u32 status_enable_extra = 0; + adapter_t *adapter = espi->adapter; + u32 status, burstval = 0x800100; + + /* Disable ESPI training. MACs that can handle it enable it below. */ + writel(0, adapter->regs + A_ESPI_TRAIN); + + if (is_T2(adapter)) { + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); + if (nports == 4) { + /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ + burstval = 0x200040; + } + } + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + + switch (mac_type) { + case CHBT_MAC_PM3393: + espi_setup_for_pm3393(adapter); + break; + default: + return -1; + } + + /* + * Make sure any pending interrupts from the SPI are + * Cleared before enabling the interrupt. + */ + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); + if (status & F_DIP2PARITYERR) { + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); + + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); + + if (is_T2(adapter)) { + tricn_init(adapter); + /* + * Always position the control at the 1st port egress IN + * (sop,eop) counter to reduce PIOs for T/N210 workaround. + */ + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) + & ~MON_MASK) | (F_MONITORED_DIRECTION + | F_MONITORED_INTERFACE); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_lock_init(&espi->lock); + } + + return 0; +} + +void t1_espi_destroy(struct peespi *espi) +{ + kfree(espi); +} + +struct peespi *t1_espi_create(adapter_t *adapter) +{ + struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL); + + memset(espi, 0, sizeof(*espi)); + + if (espi) + espi->adapter = adapter; + return espi; +} + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) +{ + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return; + spin_lock(&espi->lock); + espi->misc_ctrl = (val & ~MON_MASK) | + (espi->misc_ctrl & MON_MASK); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_unlock(&espi->lock); +} + +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) +{ + u32 sel; + + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return 0; + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); + if (!wait) { + if (!spin_trylock(&espi->lock)) + return 0; + } + else + spin_lock(&espi->lock); + if ((sel != (espi->misc_ctrl & MON_MASK))) { + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + } + else + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + spin_unlock(&espi->lock); + return sel; +} diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h new file mode 100644 index 00000000000..c90e37f8457 --- /dev/null +++ b/drivers/net/chelsio/espi.h @@ -0,0 +1,68 @@ +/***************************************************************************** + * * + * File: espi.h * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_ESPI_H_ +#define _CXGB_ESPI_H_ + +#include "common.h" + +struct espi_intr_counts { + unsigned int DIP4_err; + unsigned int rx_drops; + unsigned int tx_drops; + unsigned int rx_ovflw; + unsigned int parity_err; + unsigned int DIP2_parity_err; +}; + +struct peespi; + +struct peespi *t1_espi_create(adapter_t *adapter); +void t1_espi_destroy(struct peespi *espi); +int t1_espi_init(struct peespi *espi, int mac_type, int nports); + +void t1_espi_intr_enable(struct peespi *); +void t1_espi_intr_clear(struct peespi *); +void t1_espi_intr_disable(struct peespi *); +int t1_espi_intr_handler(struct peespi *); +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); + +#endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h new file mode 100644 index 00000000000..746b0eeea96 --- /dev/null +++ b/drivers/net/chelsio/gmac.h @@ -0,0 +1,134 @@ +/***************************************************************************** + * * + * File: gmac.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * Generic MAC functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_GMAC_H_ +#define _CXGB_GMAC_H_ + +#include "common.h" + +enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL }; +enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 }; + +struct cmac_statistics { + /* Transmit */ + u64 TxOctetsOK; + u64 TxOctetsBad; + u64 TxUnicastFramesOK; + u64 TxMulticastFramesOK; + u64 TxBroadcastFramesOK; + u64 TxPauseFrames; + u64 TxFramesWithDeferredXmissions; + u64 TxLateCollisions; + u64 TxTotalCollisions; + u64 TxFramesAbortedDueToXSCollisions; + u64 TxUnderrun; + u64 TxLengthErrors; + u64 TxInternalMACXmitError; + u64 TxFramesWithExcessiveDeferral; + u64 TxFCSErrors; + + /* Receive */ + u64 RxOctetsOK; + u64 RxOctetsBad; + u64 RxUnicastFramesOK; + u64 RxMulticastFramesOK; + u64 RxBroadcastFramesOK; + u64 RxPauseFrames; + u64 RxFCSErrors; + u64 RxAlignErrors; + u64 RxSymbolErrors; + u64 RxDataErrors; + u64 RxSequenceErrors; + u64 RxRuntErrors; + u64 RxJabberErrors; + u64 RxInternalMACRcvError; + u64 RxInRangeLengthErrors; + u64 RxOutOfRangeLengthField; + u64 RxFrameTooLongErrors; +}; + +struct cmac_ops { + void (*destroy)(struct cmac *); + int (*reset)(struct cmac *); + int (*interrupt_enable)(struct cmac *); + int (*interrupt_disable)(struct cmac *); + int (*interrupt_clear)(struct cmac *); + int (*interrupt_handler)(struct cmac *); + + int (*enable)(struct cmac *, int); + int (*disable)(struct cmac *, int); + + int (*loopback_enable)(struct cmac *); + int (*loopback_disable)(struct cmac *); + + int (*set_mtu)(struct cmac *, int mtu); + int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm); + + int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc); + int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex, + int *fc); + + const struct cmac_statistics *(*statistics_update)(struct cmac *, int); + + int (*macaddress_get)(struct cmac *, u8 mac_addr[6]); + int (*macaddress_set)(struct cmac *, u8 mac_addr[6]); +}; + +typedef struct _cmac_instance cmac_instance; + +struct cmac { + struct cmac_statistics stats; + adapter_t *adapter; + struct cmac_ops *ops; + cmac_instance *instance; +}; + +struct gmac { + unsigned int stats_update_period; + struct cmac *(*create)(adapter_t *adapter, int index); + int (*reset)(adapter_t *); +}; + +extern struct gmac t1_pm3393_ops; +extern struct gmac t1_chelsio_mac_ops; +extern struct gmac t1_vsc7321_ops; +extern struct gmac t1_ixf1010_ops; +extern struct gmac t1_dummy_mac_ops; + +#endif /* _CXGB_GMAC_H_ */ diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c new file mode 100644 index 00000000000..db503428278 --- /dev/null +++ b/drivers/net/chelsio/mv88x201x.c @@ -0,0 +1,252 @@ +/***************************************************************************** + * * + * File: mv88x201x.c * + * $Revision: 1.12 $ * + * $Date: 2005/04/15 19:27:14 $ * + * Description: * + * Marvell PHY (mv88x201x) functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "cphy.h" +#include "elmer0.h" + +/* + * The 88x2010 Rev C. requires some link status registers * to be read + * twice in order to get the right values. Future * revisions will fix + * this problem and then this macro * can disappear. + */ +#define MV88x2010_LINK_STATUS_BUGS 1 + +static int led_init(struct cphy *cphy) +{ + /* Setup the LED registers so we can turn on/off. + * Writing these bits maps control to another + * register. mmd(0x1) addr(0x7) + */ + mdio_write(cphy, 0x3, 0x8304, 0xdddd); + return 0; +} + +static int led_link(struct cphy *cphy, u32 do_enable) +{ + u32 led = 0; +#define LINK_ENABLE_BIT 0x1 + + mdio_read(cphy, 0x1, 0x7, &led); + + if (do_enable & LINK_ENABLE_BIT) { + led |= LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } else { + led &= ~LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } + return 0; +} + +/* Port Reset */ +static int mv88x201x_reset(struct cphy *cphy, int wait) +{ + /* This can be done through registers. It is not required since + * a full chip reset is used. + */ + return 0; +} + +static int mv88x201x_interrupt_enable(struct cphy *cphy) +{ + u32 elmer; + + /* Enable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x1); + + /* Enable Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + return 0; +} + +static int mv88x201x_interrupt_disable(struct cphy *cphy) +{ + u32 elmer; + + /* Disable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x0); + + /* Disable Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + return 0; +} + +static int mv88x201x_interrupt_clear(struct cphy *cphy) +{ + u32 elmer; + u32 val; + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Required to read twice before clear takes affect. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); + mdio_read(cphy, 0x1, 0x9005, &val); + + /* Read this register after the others above it else + * the register doesn't clear correctly. + */ + mdio_read(cphy, 0x1, 0x1, &val); +#endif + + /* Clear link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + /* Clear PHY LASI interrupts. */ + mdio_read(cphy, 0x1, 0x9005, &val); + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Do it again. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); +#endif + + /* Clear Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + return 0; +} + +static int mv88x201x_interrupt_handler(struct cphy *cphy) +{ + /* Clear interrupts */ + mv88x201x_interrupt_clear(cphy); + + /* We have only enabled link change interrupts and so + * cphy_cause must be a link change interrupt. + */ + return cphy_cause_link_change; +} + +static int mv88x201x_set_loopback(struct cphy *cphy, int on) +{ + return 0; +} + +static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + u32 val = 0; +#define LINK_STATUS_BIT 0x4 + + if (link_ok) { + /* Read link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + val &= LINK_STATUS_BIT; + *link_ok = (val == LINK_STATUS_BIT); + /* Turn on/off Link LED */ + led_link(cphy, *link_ok); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = PAUSE_RX | PAUSE_TX; + return 0; +} + +static void mv88x201x_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops mv88x201x_ops = { + .destroy = mv88x201x_destroy, + .reset = mv88x201x_reset, + .interrupt_enable = mv88x201x_interrupt_enable, + .interrupt_disable = mv88x201x_interrupt_disable, + .interrupt_clear = mv88x201x_interrupt_clear, + .interrupt_handler = mv88x201x_interrupt_handler, + .get_link_status = mv88x201x_get_link_status, + .set_loopback = mv88x201x_set_loopback, +}; + +static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops) +{ + u32 val; + struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) + return NULL; + memset(cphy, 0, sizeof(*cphy)); + cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); + + /* Commands the PHY to enable XFP's clock. */ + mdio_read(cphy, 0x3, 0x8300, &val); + mdio_write(cphy, 0x3, 0x8300, val | 1); + + /* Clear link status. Required because of a bug in the PHY. */ + mdio_read(cphy, 0x1, 0x8, &val); + mdio_read(cphy, 0x3, 0x8, &val); + + /* Allows for Link,Ack LED turn on/off */ + led_init(cphy); + return cphy; +} + +/* Chip Reset */ +static int mv88x201x_phy_reset(adapter_t *adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~4; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + msleep(100); + + t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); + msleep(1000); + + /* Now lets enable the Laser. Delay 100us */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= 0x8000; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(100); + return 0; +} + +struct gphy t1_mv88x201x_ops = { + mv88x201x_phy_create, + mv88x201x_phy_reset +}; diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c new file mode 100644 index 00000000000..04a1404fc65 --- /dev/null +++ b/drivers/net/chelsio/pm3393.c @@ -0,0 +1,826 @@ +/***************************************************************************** + * * + * File: pm3393.c * + * $Revision: 1.16 $ * + * $Date: 2005/05/14 00:59:32 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "gmac.h" +#include "elmer0.h" +#include "suni1x10gexp_regs.h" + +/* 802.3ae 10Gb/s MDIO Manageable Device(MMD) + */ +enum { + MMD_RESERVED, + MMD_PMAPMD, + MMD_WIS, + MMD_PCS, + MMD_PHY_XGXS, /* XGMII Extender Sublayer */ + MMD_DTE_XGXS, +}; + +enum { + PHY_XGXS_CTRL_1, + PHY_XGXS_STATUS_1 +}; + +#define OFFSET(REG_ADDR) (REG_ADDR << 2) + +/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ +#define MAX_FRAME_SIZE 9600 + +#define IPG 12 +#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ + SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ + SUNI1x10GEXP_BITMSK_TXXG_PADEN) +#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \ + SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP) + +/* Update statistics every 15 minutes */ +#define STATS_TICK_SECS (15 * 60) + +enum { /* RMON registers */ + RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW, + RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW, + RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW, + RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW, + RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW, + RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW, + RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW, + RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW, + RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW, + RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW, + RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, + RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, + RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, + + TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, + TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, + TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW, + TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, + TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, + TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, + TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW +}; + +struct _cmac_instance { + u8 enabled; + u8 fc; + u8 mac_addr[6]; +}; + +static int pmread(struct cmac *cmac, u32 reg, u32 * data32) +{ + t1_tpi_read(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +static int pmwrite(struct cmac *cmac, u32 reg, u32 data32) +{ + t1_tpi_write(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +/* Port reset. */ +static int pm3393_reset(struct cmac *cmac) +{ + return 0; +} + +/* + * Enable interrupts for the PM3393 + + 1. Enable PM3393 BLOCK interrupts. + 2. Enable PM3393 Master Interrupt bit(INTE) + 3. Enable ELMER's PM3393 bit. + 4. Enable Terminator external interrupt. +*/ +static int pm3393_interrupt_enable(struct cmac *cmac) +{ + u32 pl_intr; + + /* PM3393 - Enabling all hardware block interrupts. + */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); + + /* Don't interrupt on statistics overflow, we are polling */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff); + + /* PM3393 - Global interrupt enable + */ + /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, + 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); + pl_intr |= F_PL_INTR_EXT; + writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); + return 0; +} + +static int pm3393_interrupt_disable(struct cmac *cmac) +{ + u32 elmer; + + /* PM3393 - Enabling HW interrupt blocks. */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0); + + /* PM3393 - Global interrupt enable */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0); + + /* ELMER - External chip interrupts. */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP + * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level. + */ + + return 0; +} + +static int pm3393_interrupt_clear(struct cmac *cmac) +{ + u32 elmer; + u32 pl_intr; + u32 val32; + + /* PM3393 - Clearing HW interrupt blocks. Note, this assumes + * bit WCIMODE=0 for a clear-on-read. + */ + pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION, + &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32); + + /* PM3393 - Global interrupt status + */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32); + + /* ELMER - External chip interrupts. + */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT + */ + pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); + pl_intr |= F_PL_INTR_EXT; + writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); + + return 0; +} + +/* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ + /* Read the master interrupt status register. */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, + &master_intr_status); + + /* TBD XXX Lets just clear everything for now */ + pm3393_interrupt_clear(cmac); + + return 0; +} + +static int pm3393_enable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, + (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN)); + + if (which & MAC_DIRECTION_TX) { + u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0; + + if (cmac->instance->fc & PAUSE_RX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX; + if (cmac->instance->fc & PAUSE_TX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX; + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val); + } + + cmac->instance->enabled |= which; + return 0; +} + +static int pm3393_enable_port(struct cmac *cmac, int which) +{ + /* Clear port statistics */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_CLEAR); + udelay(2); + memset(&cmac->stats, 0, sizeof(struct cmac_statistics)); + + pm3393_enable(cmac, which); + + /* + * XXX This should be done by the PHY and preferrably not at all. + * The PHY doesn't give us link status indication on its own so have + * the link management code query it instead. + */ + { + extern void link_changed(adapter_t *adapter, int port_id); + + link_changed(cmac->adapter, 0); + } + return 0; +} + +static int pm3393_disable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL); + if (which & MAC_DIRECTION_TX) + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL); + + /* + * The disable is graceful. Give the PM3393 time. Can't wait very + * long here, we may be holding locks. + */ + udelay(20); + + cmac->instance->enabled &= ~which; + return 0; +} + +static int pm3393_loopback_enable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_loopback_disable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_set_mtu(struct cmac *cmac, int mtu) +{ + int enabled = cmac->instance->enabled; + + /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */ + mtu += 14 + 4; + if (mtu > MAX_FRAME_SIZE) + return -EINVAL; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static u32 calc_crc(u8 *b, int len) +{ + int i; + u32 crc = (u32)~0; + + /* calculate crc one bit at a time */ + while (len--) { + crc ^= *b++; + for (i = 0; i < 8; i++) { + if (crc & 0x1) + crc = (crc >> 1) ^ 0xedb88320; + else + crc = (crc >> 1); + } + } + + /* reverse bits */ + crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0); + crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc); + crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa); + /* swap bytes */ + crc = (crc >> 16) | (crc << 16); + crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); + + return crc; +} + +static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) +{ + int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; + u32 rx_mode; + + /* Disable MAC RX before reconfiguring it */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX); + + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode); + rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE | + SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, + (u16)rx_mode); + + if (t1_rx_mode_promisc(rm)) { + /* Promiscuous mode. */ + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE; + } + if (t1_rx_mode_allmulti(rm)) { + /* Accept all multicast. */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } else if (t1_rx_mode_mc_cnt(rm)) { + /* Accept one or more multicast(s). */ + u8 *addr; + int bit; + u16 mc_filter[4] = { 0, }; + + while ((addr = t1_get_next_mcaddr(rm))) { + bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */ + mc_filter[bit >> 4] |= 1 << (bit & 0xf); + } + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode); + + if (enabled) + pm3393_enable(cmac, MAC_DIRECTION_RX); + + return 0; +} + +static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed, + int *duplex, int *fc) +{ + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = cmac->instance->fc; + return 0; +} + +static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, + int fc) +{ + if (speed >= 0 && speed != SPEED_10000) + return -1; + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -1; + if (fc & ~(PAUSE_TX | PAUSE_RX)) + return -1; + + if (fc != cmac->instance->fc) { + cmac->instance->fc = (u8) fc; + if (cmac->instance->enabled & MAC_DIRECTION_TX) + pm3393_enable(cmac, MAC_DIRECTION_TX); + } + return 0; +} + +#define RMON_UPDATE(mac, name, stat_name) \ + { \ + t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \ + (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \ + (((u64)val1 & 0xffff) << 16) | \ + (((u64)val2 & 0xff) << 32) | \ + ((mac)->stats.stat_name & \ + (~(u64)0 << 40)); \ + if (ro & \ + ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \ + (mac)->stats.stat_name += ((u64)1 << 40); \ + } + +static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, + int flag) +{ + u64 ro; + u32 val0, val1, val2, val3; + + /* Snap the counters */ + pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_SNAP); + + /* Counter rollover, clear on read */ + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3); + ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) | + (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48); + + /* Rx stats */ + RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK); + RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK); + RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK); + RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK); + RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames); + RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors); + RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors, + RxInternalMACRcvError); + RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); + RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors); + RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors); + RMON_UPDATE(mac, RxJabbers, RxJabberErrors); + RMON_UPDATE(mac, RxFragments, RxRuntErrors); + RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); + + /* Tx stats */ + RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); + RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError, + TxInternalMACXmitError); + RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors); + RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK); + RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); + RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); + RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); + + return &mac->stats; +} + +static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6]) +{ + memcpy(mac_addr, cmac->instance->mac_addr, 6); + return 0; +} + +static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6]) +{ + u32 val, lo, mid, hi, enabled = cmac->instance->enabled; + + /* + * MAC addr: 00:07:43:00:13:09 + * + * ma[5] = 0x09 + * ma[4] = 0x13 + * ma[3] = 0x00 + * ma[2] = 0x43 + * ma[1] = 0x07 + * ma[0] = 0x00 + * + * The PM3393 requires byte swapping and reverse order entry + * when programming MAC addresses: + * + * low_bits[15:0] = ma[1]:ma[0] + * mid_bits[31:16] = ma[3]:ma[2] + * high_bits[47:32] = ma[5]:ma[4] + */ + + /* Store local copy */ + memcpy(cmac->instance->mac_addr, ma, 6); + + lo = ((u32) ma[1] << 8) | (u32) ma[0]; + mid = ((u32) ma[3] << 8) | (u32) ma[2]; + hi = ((u32) ma[5] << 8) | (u32) ma[4]; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + /* Set RXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi); + + /* Set TXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi); + + /* Setup Exact Match Filter 1 with our MAC address + * + * Must disable exact match filter before configuring it. + */ + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val); + val &= 0xff0f; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi); + + val |= 0x0090; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static void pm3393_destroy(struct cmac *cmac) +{ + kfree(cmac); +} + +static struct cmac_ops pm3393_ops = { + .destroy = pm3393_destroy, + .reset = pm3393_reset, + .interrupt_enable = pm3393_interrupt_enable, + .interrupt_disable = pm3393_interrupt_disable, + .interrupt_clear = pm3393_interrupt_clear, + .interrupt_handler = pm3393_interrupt_handler, + .enable = pm3393_enable_port, + .disable = pm3393_disable, + .loopback_enable = pm3393_loopback_enable, + .loopback_disable = pm3393_loopback_disable, + .set_mtu = pm3393_set_mtu, + .set_rx_mode = pm3393_set_rx_mode, + .get_speed_duplex_fc = pm3393_get_speed_duplex_fc, + .set_speed_duplex_fc = pm3393_set_speed_duplex_fc, + .statistics_update = pm3393_update_statistics, + .macaddress_get = pm3393_macaddress_get, + .macaddress_set = pm3393_macaddress_set +}; + +static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) +{ + struct cmac *cmac; + + cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); + if (!cmac) + return NULL; + memset(cmac, 0, sizeof(*cmac)); + + cmac->ops = &pm3393_ops; + cmac->instance = (cmac_instance *) (cmac + 1); + cmac->adapter = adapter; + cmac->instance->fc = PAUSE_TX | PAUSE_RX; + + t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000); + t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000); + t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800); + t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */ + t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00); + t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */ + + t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */ + t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */ + t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */ + t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */ + t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */ + t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */ + t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */ + t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */ + + t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */ + t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */ + + t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */ + t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */ + + t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ + /* For T1 use timer based Mac flow control. */ + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ + + /* Setup Exact Match Filter 0 to allow broadcast packets. + */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */ + t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */ + t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */ + t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */ + + t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */ + t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */ + t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */ + + return cmac; +} + +static int pm3393_mac_reset(adapter_t * adapter) +{ + u32 val; + u32 x; + u32 is_pl4_reset_finished; + u32 is_pl4_outof_lock; + u32 is_xaui_mabc_pll_locked; + u32 successful_reset; + int i; + + /* The following steps are required to properly reset + * the PM3393. This information is provided in the + * PM3393 datasheet (Issue 2: November 2002) + * section 13.1 -- Device Reset. + * + * The PM3393 has three types of components that are + * individually reset: + * + * DRESETB - Digital circuitry + * PL4_ARESETB - PL4 analog circuitry + * XAUI_ARESETB - XAUI bus analog circuitry + * + * Steps to reset PM3393 using RSTB pin: + * + * 1. Assert RSTB pin low ( write 0 ) + * 2. Wait at least 1ms to initiate a complete initialization of device. + * 3. Wait until all external clocks and REFSEL are stable. + * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable) + * 5. De-assert RSTB ( write 1 ) + * 6. Wait until internal timers to expires after ~14ms. + * - Allows analog clock synthesizer(PL4CSU) to stabilize to + * selected reference frequency before allowing the digital + * portion of the device to operate. + * 7. Wait at least 200us for XAUI interface to stabilize. + * 8. Verify the PM3393 came out of reset successfully. + * Set successful reset flag if everything worked else try again + * a few more times. + */ + + successful_reset = 0; + for (i = 0; i < 3 && !successful_reset; i++) { + /* 1 */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 2 */ + msleep(1); + + /* 3 */ + msleep(1); + + /* 4 */ + msleep(2 /*1 extra ms for safety */ ); + + /* 5 */ + val |= 1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 6 */ + msleep(15 /*1 extra ms for safety */ ); + + /* 7 */ + msleep(1); + + /* 8 */ + + /* Has PL4 analog block come out of reset correctly? */ + t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val); + is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED); + + /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence + * figure out why? */ + + /* Have all PL4 block clocks locked? */ + x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL + /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ | + SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL); + is_pl4_outof_lock = (val & x); + + /* ??? If this fails, might be able to software reset the XAUI part + * and try to recover... thus saving us from doing another HW reset */ + /* Has the XAUI MABC PLL circuitry stablized? */ + is_xaui_mabc_pll_locked = + (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED); + + successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock + && is_xaui_mabc_pll_locked); + } + return successful_reset ? 0 : 1; +} + +struct gmac t1_pm3393_ops = { + STATS_TICK_SECS, + pm3393_mac_create, + pm3393_mac_reset +}; diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h new file mode 100644 index 00000000000..b90e11f40d1 --- /dev/null +++ b/drivers/net/chelsio/regs.h @@ -0,0 +1,468 @@ +/***************************************************************************** + * * + * File: regs.h * + * $Revision: 1.8 $ * + * $Date: 2005/06/21 18:29:48 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_REGS_H_ +#define _CXGB_REGS_H_ + +/* SGE registers */ +#define A_SG_CONTROL 0x0 + +#define S_CMDQ0_ENABLE 0 +#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE) +#define F_CMDQ0_ENABLE V_CMDQ0_ENABLE(1U) + +#define S_CMDQ1_ENABLE 1 +#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE) +#define F_CMDQ1_ENABLE V_CMDQ1_ENABLE(1U) + +#define S_FL0_ENABLE 2 +#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE) +#define F_FL0_ENABLE V_FL0_ENABLE(1U) + +#define S_FL1_ENABLE 3 +#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE) +#define F_FL1_ENABLE V_FL1_ENABLE(1U) + +#define S_CPL_ENABLE 4 +#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE) +#define F_CPL_ENABLE V_CPL_ENABLE(1U) + +#define S_RESPONSE_QUEUE_ENABLE 5 +#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE) +#define F_RESPONSE_QUEUE_ENABLE V_RESPONSE_QUEUE_ENABLE(1U) + +#define S_CMDQ_PRIORITY 6 +#define M_CMDQ_PRIORITY 0x3 +#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY) +#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY) + +#define S_DISABLE_CMDQ1_GTS 9 +#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) +#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) + +#define S_DISABLE_FL0_GTS 10 +#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS) +#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U) + +#define S_DISABLE_FL1_GTS 11 +#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS) +#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U) + +#define S_ENABLE_BIG_ENDIAN 12 +#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) +#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) + +#define S_ISCSI_COALESCE 14 +#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE) +#define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U) + +#define S_RX_PKT_OFFSET 15 +#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET) + +#define S_VLAN_XTRACT 18 +#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT) +#define F_VLAN_XTRACT V_VLAN_XTRACT(1U) + +#define A_SG_DOORBELL 0x4 +#define A_SG_CMD0BASELWR 0x8 +#define A_SG_CMD0BASEUPR 0xc +#define A_SG_CMD1BASELWR 0x10 +#define A_SG_CMD1BASEUPR 0x14 +#define A_SG_FL0BASELWR 0x18 +#define A_SG_FL0BASEUPR 0x1c +#define A_SG_FL1BASELWR 0x20 +#define A_SG_FL1BASEUPR 0x24 +#define A_SG_CMD0SIZE 0x28 +#define A_SG_FL0SIZE 0x2c +#define A_SG_RSPSIZE 0x30 +#define A_SG_RSPBASELWR 0x34 +#define A_SG_RSPBASEUPR 0x38 +#define A_SG_FLTHRESHOLD 0x3c +#define A_SG_RSPQUEUECREDIT 0x40 +#define A_SG_SLEEPING 0x48 +#define A_SG_INTRTIMER 0x4c +#define A_SG_CMD1SIZE 0xb0 +#define A_SG_FL1SIZE 0xb4 +#define A_SG_INT_ENABLE 0xb8 + +#define S_RESPQ_EXHAUSTED 0 +#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED) +#define F_RESPQ_EXHAUSTED V_RESPQ_EXHAUSTED(1U) + +#define S_RESPQ_OVERFLOW 1 +#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW) +#define F_RESPQ_OVERFLOW V_RESPQ_OVERFLOW(1U) + +#define S_FL_EXHAUSTED 2 +#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED) +#define F_FL_EXHAUSTED V_FL_EXHAUSTED(1U) + +#define S_PACKET_TOO_BIG 3 +#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG) +#define F_PACKET_TOO_BIG V_PACKET_TOO_BIG(1U) + +#define S_PACKET_MISMATCH 4 +#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH) +#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) + +#define A_SG_INT_CAUSE 0xbc +#define A_SG_RESPACCUTIMER 0xc0 + +/* MC3 registers */ + +#define S_READY 1 +#define V_READY(x) ((x) << S_READY) +#define F_READY V_READY(1U) + +/* MC4 registers */ + +#define A_MC4_CFG 0x180 +#define S_MC4_SLOW 25 +#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW) +#define F_MC4_SLOW V_MC4_SLOW(1U) + +/* TPI registers */ + +#define A_TPI_ADDR 0x280 +#define A_TPI_WR_DATA 0x284 +#define A_TPI_RD_DATA 0x288 +#define A_TPI_CSR 0x28c + +#define S_TPIWR 0 +#define V_TPIWR(x) ((x) << S_TPIWR) +#define F_TPIWR V_TPIWR(1U) + +#define S_TPIRDY 1 +#define V_TPIRDY(x) ((x) << S_TPIRDY) +#define F_TPIRDY V_TPIRDY(1U) + +#define A_TPI_PAR 0x29c + +#define S_TPIPAR 0 +#define M_TPIPAR 0x7f +#define V_TPIPAR(x) ((x) << S_TPIPAR) +#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR) + +/* TP registers */ + +#define A_TP_IN_CONFIG 0x300 + +#define S_TP_IN_CSPI_CPL 3 +#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL) +#define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U) + +#define S_TP_IN_CSPI_CHECK_IP_CSUM 5 +#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM) +#define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_CSPI_CHECK_TCP_CSUM 6 +#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM) +#define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U) + +#define S_TP_IN_ESPI_ETHERNET 8 +#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET) +#define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U) + +#define S_TP_IN_ESPI_CHECK_IP_CSUM 12 +#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM) +#define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_ESPI_CHECK_TCP_CSUM 13 +#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM) +#define F_TP_IN_ESPI_CHECK_TCP_CSUM V_TP_IN_ESPI_CHECK_TCP_CSUM(1U) + +#define S_OFFLOAD_DISABLE 14 +#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE) +#define F_OFFLOAD_DISABLE V_OFFLOAD_DISABLE(1U) + +#define A_TP_OUT_CONFIG 0x304 + +#define S_TP_OUT_CSPI_CPL 2 +#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL) +#define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U) + +#define S_TP_OUT_ESPI_ETHERNET 6 +#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET) +#define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U) + +#define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10 +#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U) + +#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM 11 +#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U) + +#define A_TP_GLOBAL_CONFIG 0x308 + +#define S_IP_TTL 0 +#define M_IP_TTL 0xff +#define V_IP_TTL(x) ((x) << S_IP_TTL) + +#define S_TCP_CSUM 11 +#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM) +#define F_TCP_CSUM V_TCP_CSUM(1U) + +#define S_UDP_CSUM 12 +#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM) +#define F_UDP_CSUM V_UDP_CSUM(1U) + +#define S_IP_CSUM 13 +#define V_IP_CSUM(x) ((x) << S_IP_CSUM) +#define F_IP_CSUM V_IP_CSUM(1U) + +#define S_PATH_MTU 15 +#define V_PATH_MTU(x) ((x) << S_PATH_MTU) +#define F_PATH_MTU V_PATH_MTU(1U) + +#define S_5TUPLE_LOOKUP 17 +#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP) + +#define S_SYN_COOKIE_PARAMETER 26 +#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) + +#define A_TP_PC_CONFIG 0x348 +#define S_DIS_TX_FILL_WIN_PUSH 12 +#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) +#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) + +#define S_TP_PC_REV 30 +#define M_TP_PC_REV 0x3 +#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) +#define A_TP_RESET 0x44c +#define S_TP_RESET 0 +#define V_TP_RESET(x) ((x) << S_TP_RESET) +#define F_TP_RESET V_TP_RESET(1U) + +#define A_TP_INT_ENABLE 0x470 +#define A_TP_INT_CAUSE 0x474 +#define A_TP_TX_DROP_CONFIG 0x4b8 + +#define S_ENABLE_TX_DROP 31 +#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP) +#define F_ENABLE_TX_DROP V_ENABLE_TX_DROP(1U) + +#define S_ENABLE_TX_ERROR 30 +#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR) +#define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U) + +#define S_DROP_TICKS_CNT 4 +#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT) + +#define S_NUM_PKTS_DROPPED 0 +#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED) + +/* CSPI registers */ + +#define S_DIP4ERR 0 +#define V_DIP4ERR(x) ((x) << S_DIP4ERR) +#define F_DIP4ERR V_DIP4ERR(1U) + +#define S_RXDROP 1 +#define V_RXDROP(x) ((x) << S_RXDROP) +#define F_RXDROP V_RXDROP(1U) + +#define S_TXDROP 2 +#define V_TXDROP(x) ((x) << S_TXDROP) +#define F_TXDROP V_TXDROP(1U) + +#define S_RXOVERFLOW 3 +#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW) +#define F_RXOVERFLOW V_RXOVERFLOW(1U) + +#define S_RAMPARITYERR 4 +#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR) +#define F_RAMPARITYERR V_RAMPARITYERR(1U) + +/* ESPI registers */ + +#define A_ESPI_SCH_TOKEN0 0x880 +#define A_ESPI_SCH_TOKEN1 0x884 +#define A_ESPI_SCH_TOKEN2 0x888 +#define A_ESPI_SCH_TOKEN3 0x88c +#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890 +#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894 +#define A_ESPI_CALENDAR_LENGTH 0x898 +#define A_PORT_CONFIG 0x89c + +#define S_RX_NPORTS 0 +#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS) + +#define S_TX_NPORTS 8 +#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS) + +#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0 + +#define S_RXSTATUSENABLE 0 +#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE) +#define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U) + +#define S_INTEL1010MODE 4 +#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE) +#define F_INTEL1010MODE V_INTEL1010MODE(1U) + +#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8 +#define A_ESPI_TRAIN 0x8ac +#define A_ESPI_INTR_STATUS 0x8c8 + +#define S_DIP2PARITYERR 5 +#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR) +#define F_DIP2PARITYERR V_DIP2PARITYERR(1U) + +#define A_ESPI_INTR_ENABLE 0x8cc +#define A_RX_DROP_THRESHOLD 0x8d0 +#define A_ESPI_RX_RESET 0x8ec +#define A_ESPI_MISC_CONTROL 0x8f0 + +#define S_OUT_OF_SYNC_COUNT 0 +#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT) + +#define S_DIP2_PARITY_ERR_THRES 5 +#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES) + +#define S_DIP4_THRES 9 +#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES) + +#define S_MONITORED_PORT_NUM 25 +#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM) + +#define S_MONITORED_DIRECTION 27 +#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION) +#define F_MONITORED_DIRECTION V_MONITORED_DIRECTION(1U) + +#define S_MONITORED_INTERFACE 28 +#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE) +#define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U) + +#define A_ESPI_DIP2_ERR_COUNT 0x8f4 +#define A_ESPI_CMD_ADDR 0x8f8 + +#define S_WRITE_DATA 0 +#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA) + +#define S_REGISTER_OFFSET 8 +#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET) + +#define S_CHANNEL_ADDR 12 +#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR) + +#define S_MODULE_ADDR 16 +#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR) + +#define S_BUNDLE_ADDR 20 +#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR) + +#define S_SPI4_COMMAND 24 +#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND) + +#define A_ESPI_GOSTAT 0x8fc +#define S_ESPI_CMD_BUSY 8 +#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY) +#define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U) + +/* PL registers */ + +#define A_PL_ENABLE 0xa00 + +#define S_PL_INTR_SGE_ERR 0 +#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR) +#define F_PL_INTR_SGE_ERR V_PL_INTR_SGE_ERR(1U) + +#define S_PL_INTR_SGE_DATA 1 +#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA) +#define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U) + +#define S_PL_INTR_TP 6 +#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP) +#define F_PL_INTR_TP V_PL_INTR_TP(1U) + +#define S_PL_INTR_ESPI 8 +#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI) +#define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U) + +#define S_PL_INTR_PCIX 10 +#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX) +#define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U) + +#define S_PL_INTR_EXT 11 +#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT) +#define F_PL_INTR_EXT V_PL_INTR_EXT(1U) + +#define A_PL_CAUSE 0xa04 + +/* MC5 registers */ + +#define A_MC5_CONFIG 0xc04 + +#define S_TCAM_RESET 1 +#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET) +#define F_TCAM_RESET V_TCAM_RESET(1U) + +#define S_M_BUS_ENABLE 5 +#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE) +#define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U) + +/* PCICFG registers */ + +#define A_PCICFG_PM_CSR 0x44 +#define A_PCICFG_VPD_ADDR 0x4a + +#define S_VPD_OP_FLAG 15 +#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG) +#define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U) + +#define A_PCICFG_VPD_DATA 0x4c + +#define A_PCICFG_INTR_ENABLE 0xf4 +#define A_PCICFG_INTR_CAUSE 0xf8 + +#define A_PCICFG_MODE 0xfc + +#define S_PCI_MODE_64BIT 0 +#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT) +#define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U) + +#define S_PCI_MODE_PCIX 5 +#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX) +#define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U) + +#define S_PCI_MODE_CLK 6 +#define M_PCI_MODE_CLK 0x3 +#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) + +#endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c new file mode 100644 index 00000000000..53b41d99b00 --- /dev/null +++ b/drivers/net/chelsio/sge.c @@ -0,0 +1,1684 @@ +/***************************************************************************** + * * + * File: sge.c * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * + * Description: * + * DMA engine. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/ip.h> +#include <linux/in.h> +#include <linux/if_arp.h> + +#include "cpl5_cmd.h" +#include "sge.h" +#include "regs.h" +#include "espi.h" + + +#ifdef NETIF_F_TSO +#include <linux/tcp.h> +#endif + +#define SGE_CMDQ_N 2 +#define SGE_FREELQ_N 2 +#define SGE_CMDQ0_E_N 1024 +#define SGE_CMDQ1_E_N 128 +#define SGE_FREEL_SIZE 4096 +#define SGE_JUMBO_FREEL_SIZE 512 +#define SGE_FREEL_REFILL_THRESH 16 +#define SGE_RESPQ_E_N 1024 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_COPY_THRES 256 +#define SGE_RX_SM_BUF_SIZE 1536 + +# define SGE_RX_DROP_THRES 2 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) + +#ifndef NET_IP_ALIGN +# define NET_IP_ALIGN 2 +#endif + +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + +/* + * Command queue, receive buffer list, and response queue descriptors. + */ +#if defined(__BIG_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; +}; + +struct freelQ_e { + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; +}; + +struct respQ_e { + u32 Qsleeping : 4; + u32 Cmdq1CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq0DmaComplete : 5; + u32 FreelistQid : 2; + u32 CreditValid : 1; + u32 DataValid : 1; + u32 Offload : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 GenerationBit : 1; + u32 BufferLength; +}; +#elif defined(__LITTLE_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; +}; + +struct freelQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; +}; + +struct respQ_e { + u32 BufferLength; + u32 GenerationBit : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 Offload : 1; + u32 DataValid : 1; + u32 CreditValid : 1; + u32 FreelistQid : 2; + u32 Cmdq0DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq1CreditReturn : 5; + u32 Qsleeping : 4; +} ; +#endif + +/* + * SW Context Command and Freelist Queue Descriptors + */ +struct cmdQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +struct freelQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +/* + * SW command, freelist and response rings + */ +struct cmdQ { + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ +}; + +struct freelQ { + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u16 rx_buffer_size; /* Buffer size on this free list */ + u16 dma_offset; /* DMA offset to align IP headers */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ +}; + +struct respQ { + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ + struct respQ_e *entries; /* HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ +}; + +/* + * Main SGE data structure + * + * Interrupts are handled by a single CPU and it is likely that on a MP system + * the application is migrated to another CPU. In that scenario, we try to + * seperate the RX(in irq context) and TX state in order to decrease memory + * contention. + */ +struct sge { + struct adapter *adapter; /* adapter backpointer */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ + unsigned int rx_pkt_pad; /* RX padding for L2 packets */ + unsigned int jumbo_fl; /* jumbo freelist Q index */ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned int espibug_timeout; + struct sk_buff *espibug_skb; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats port_stats[MAX_NPORTS]; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; +}; + +/* + * PIO to indicate that memory mapped Q contains valid descriptor(s). + */ +static inline void doorbell_pio(struct adapter *adapter, u32 val) +{ + wmb(); + writel(val, adapter->regs + A_SG_DOORBELL); +} + +/* + * Frees all RX buffers on the freelist Q. The caller must make sure that + * the SGE is turned off before calling this function. + */ +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) +{ + unsigned int cidx = q->cidx; + + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; + + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(ce->skb); + ce->skb = NULL; + if (++cidx == q->size) + cidx = 0; + } +} + +/* + * Free RX free list and response queue resources. + */ +static void free_rx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + if (sge->respQ.entries) { + size = sizeof(struct respQ_e) * sge->respQ.size; + pci_free_consistent(pdev, size, sge->respQ.entries, + sge->respQ.dma_addr); + } + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic RX resources, consisting of memory mapped freelist Qs and a + * response queue. + */ +static int alloc_rx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) + goto err_no_mem; + memset(q->entries, 0, size); + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + memset(q->centries, 0, size); + } + + /* + * Calculate the buffer sizes for the two free lists. FL0 accommodates + * regular sized Ethernet frames, FL1 is sized not to exceed 16K, + * including all the sk_buff overhead. + * + * Note: For T2 FL0 and FL1 are reversed. + */ + sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data) + + sge->freelQ[!sge->jumbo_fl].dma_offset; + sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + + sge->respQ.genbit = 1; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; + sge->respQ.entries = (struct respQ_e *) + pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); + if (!sge->respQ.entries) + goto err_no_mem; + memset(sge->respQ.entries, 0, size); + return 0; + +err_no_mem: + free_rx_resources(sge); + return -ENOMEM; +} + +/* + * Reclaims n TX descriptors and frees the buffers associated with them. + */ +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) +{ + struct cmdQ_ce *ce; + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int cidx = q->cidx; + + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (q->sop) + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + q->sop = 0; + if (ce->skb) { + dev_kfree_skb(ce->skb); + q->sop = 1; + } + ce++; + if (++cidx == q->size) { + cidx = 0; + ce = q->centries; + } + } + q->cidx = cidx; +} + +/* + * Free TX resources. + * + * Assumes that SGE is stopped and all interrupts are disabled. + */ +static void free_tx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic TX resources, consisting of memory mapped command Qs. + */ +static int alloc_tx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) + goto err_no_mem; + memset(q->entries, 0, size); + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + memset(q->centries, 0, size); + } + + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); + return 0; + +err_no_mem: + free_tx_resources(sge); + return -ENOMEM; +} + +static inline void setup_ring_params(struct adapter *adapter, u64 addr, + u32 size, int base_reg_lo, + int base_reg_hi, int size_reg) +{ + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); +} + +/* + * Enable/disable VLAN acceleration. + */ +void t1_set_vlan_accel(struct adapter *adapter, int on_off) +{ + struct sge *sge = adapter->sge; + + sge->sge_control &= ~F_VLAN_XTRACT; + if (on_off) + sge->sge_control |= F_VLAN_XTRACT; + if (adapter->open_device_map) { + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ + } +} + +/* + * Programs the various SGE registers. However, the engine is not yet enabled, + * but sge->sge_control is setup and ready to go. + */ +static void configure_sge(struct sge *sge, struct sge_params *p) +{ + struct adapter *ap = sge->adapter; + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, + A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, + A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); + setup_ring_params(ap, sge->freelQ[0].dma_addr, + sge->freelQ[0].size, A_SG_FL0BASELWR, + A_SG_FL0BASEUPR, A_SG_FL0SIZE); + setup_ring_params(ap, sge->freelQ[1].dma_addr, + sge->freelQ[1].size, A_SG_FL1BASELWR, + A_SG_FL1BASEUPR, A_SG_FL1SIZE); + + /* The threshold comparison uses <. */ + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); + + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); + + sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | + F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | + V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | + V_RX_PKT_OFFSET(sge->rx_pkt_pad); + +#if defined(__BIG_ENDIAN_BITFIELD) + sge->sge_control |= F_ENABLE_BIG_ENDIAN; +#endif + + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); +} + +/* + * Return the payload capacity of the jumbo free-list buffers. + */ +static inline unsigned int jumbo_payload_capacity(const struct sge *sge) +{ + return sge->freelQ[sge->jumbo_fl].rx_buffer_size - + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); +} + +/* + * Frees all SGE related resources and the sge structure itself + */ +void t1_sge_destroy(struct sge *sge) +{ + if (sge->espibug_skb) + kfree_skb(sge->espibug_skb); + + free_tx_resources(sge); + free_rx_resources(sge); + kfree(sge); +} + +/* + * Allocates new RX buffers on the freelist Q (and tracks them on the freelist + * context Q) until the Q is full or alloc_skb fails. + * + * It is possible that the generation bits already match, indicating that the + * buffer is already valid and nothing needs to be done. This happens when we + * copied a received buffer into a new sk_buff during the interrupt processing. + * + * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad), + * we specify a RX_OFFSET in order to make sure that the IP header is 4B + * aligned. + */ +static void refill_free_list(struct sge *sge, struct freelQ *q) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; + + + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); + + e++; + ce++; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; + } + q->credits++; + } + +} + +/* + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. + */ +static void freelQs_empty(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); + u32 irqholdoff_reg; + + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { + irq_reg |= F_FL_EXHAUSTED; + irqholdoff_reg = sge->fixed_intrtimer; + } else { + /* Clear the F_FL_EXHAUSTED interrupts for now */ + irq_reg &= ~F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer_nres; + } + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); + + /* We reenable the Qs to force a freelist GTS interrupt later */ + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); +} + +#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) +#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) +#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \ + F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) + +/* + * Disable SGE Interrupts + */ +void t1_sge_intr_disable(struct sge *sge) +{ + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); +} + +/* + * Enable SGE interrupts. + */ +void t1_sge_intr_enable(struct sge *sge) +{ + u32 en = SGE_INT_ENABLE; + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + if (sge->adapter->flags & TSO_CAPABLE) + en &= ~F_PACKET_TOO_BIG; + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); +} + +/* + * Clear SGE interrupts. + */ +void t1_sge_intr_clear(struct sge *sge) +{ + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); +} + +/* + * SGE 'Error' interrupt handler + */ +int t1_sge_intr_error_handler(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); + + if (adapter->flags & TSO_CAPABLE) + cause &= ~F_PACKET_TOO_BIG; + if (cause & F_RESPQ_EXHAUSTED) + sge->stats.respQ_empty++; + if (cause & F_RESPQ_OVERFLOW) { + sge->stats.respQ_overflow++; + CH_ALERT("%s: SGE response queue overflow\n", + adapter->name); + } + if (cause & F_FL_EXHAUSTED) { + sge->stats.freelistQ_empty++; + freelQs_empty(sge); + } + if (cause & F_PACKET_TOO_BIG) { + sge->stats.pkt_too_big++; + CH_ALERT("%s: SGE max packet size exceeded\n", + adapter->name); + } + if (cause & F_PACKET_MISMATCH) { + sge->stats.pkt_mismatch++; + CH_ALERT("%s: SGE packet mismatch\n", adapter->name); + } + if (cause & SGE_INT_FATAL) + t1_fatal_err(adapter); + + writel(cause, adapter->regs + A_SG_INT_CAUSE); + return 0; +} + +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +{ + return &sge->stats; +} + +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +{ + return &sge->port_stats[port]; +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle + * + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. + */ +static void recycle_fl_buf(struct freelQ *fl, int idx) +{ + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; + + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; + + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; + } +} + +/** + * get_packet - return the next ingress packet buffer + * @pdev: the PCI device that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * @dma_pad: padding at beginning of buffer left by SGE DMA + * @skb_pad: padding to be used if the packet is copied + * @copy_thres: length threshold under which a packet should be copied + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct pci_dev *pdev, + struct freelQ *fl, unsigned int len, + int dma_pad, int skb_pad, + unsigned int copy_thres, + unsigned int drop_thres) +{ + struct sk_buff *skb; + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + + if (len < copy_thres) { + skb = alloc_skb(len + skb_pad, GFP_ATOMIC); + if (likely(skb != NULL)) { + skb_reserve(skb, skb_pad); + skb_put(skb, len); + pci_dma_sync_single_for_cpu(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + memcpy(skb->data, ce->skb->data + dma_pad, len); + pci_dma_sync_single_for_device(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; + + recycle_fl_buf(fl, fl->cidx); + return skb; + } + + if (fl->credits < drop_thres) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } + +use_orig_buf: + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + skb = ce->skb; + skb_reserve(skb, dma_pad); + skb_put(skb, len); + return skb; +} + +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + CH_ERR("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); +} + +/* + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. + */ +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) +{ + dma_addr_t mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); + + flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + e = &q->entries[pidx]; + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); + for (e1 = e, i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + ce++; + e1++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + ce = q->centries; + e1 = q->entries; + } + + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + + e1->addr_lo = (u32)mapping; + e1->addr_hi = (u64)mapping >> 32; + e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); + e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + } + + ce->skb = skb; + wmb(); + e->flags = flags; +} + +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; + + if (reclaim) { + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; + } +} + +#ifndef SET_ETHTOOL_OPS +# define __netif_rx_complete(dev) netif_rx_complete(dev) +#endif + +/* + * We cannot use the standard netif_rx_schedule_prep() because we have multiple + * ports plus the TOE all multiplexing onto a single response queue, therefore + * accepting new responses cannot depend on the state of any particular port. + * So define our own equivalent that omits the netif_running() test. + */ +static inline int napi_schedule_prep(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + + +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length + * + * Process an ingress ethernet pakcet and deliver it to the stack. + */ +static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) +{ + struct sk_buff *skb; + struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; + + sge->stats.ethernet_pkts++; + skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, + sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, + SGE_RX_DROP_THRES); + if (!skb) { + sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + return 0; + } + + p = (struct cpl_rx_pkt *)skb->data; + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + sge->port_stats[p->iff].rx_cso_good++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(adapter->vlan_grp && p->vlan_valid)) { + sge->port_stats[p->iff].vlan_xtract++; + if (adapter->params.sge.polling) + vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + } else if (adapter->params.sge.polling) + netif_receive_skb(skb); + else + netif_rx(skb); + return 0; +} + +/* + * Returns true if a command queue has enough available descriptors that + * we can resume Tx operation after temporarily disabling its packet queue. + */ +static inline int enough_free_Tx_descs(const struct cmdQ *q) +{ + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); +} + +/* + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. + */ +static void restart_tx_queues(struct sge *sge) +{ + struct adapter *adap = sge->adapter; + + if (enough_free_Tx_descs(&sge->cmdQ[0])) { + int i; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, + &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[3]++; + netif_wake_queue(nd); + } + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; + + cmdq->processed += pr0; + + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); + + return flags; +} + +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int budget_left = budget; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + + while (likely(budget_left && e->GenerationBit == q->genbit)) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; + } + if (likely(e->DataValid)) { + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + if (unlikely(!e->Sop || !e->Eop)) + BUG(); + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + --budget_left; + } + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + budget -= budget_left; + return budget; +} + +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + do { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + return e->GenerationBit == q->genbit; +} + +/* + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. + */ +static int t1_poll(struct net_device *dev, int *budget) +{ + struct adapter *adapter = dev->priv; + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= effective_budget) + return 1; + + __netif_rx_complete(dev); + + /* + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. + */ + writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + return 0; +} + +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + +/* + * NAPI version of the main interrupt handler. + */ +static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs) +{ + int handled; + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + struct respQ *q = &adapter->sge->respQ; + + /* + * Clear the SGE_DATA interrupt first thing. Normally the NAPI + * handler has control of the response queue and the interrupt handler + * can look at the queue reliably only once it knows NAPI is off. + * We can't wait that long to clear the SGE_DATA interrupt because we + * could race with t1_poll rearming the SGE interrupt, so we need to + * clear the interrupt speculatively and really early on. + */ + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + spin_lock(&adapter->async_lock); + if (!napi_is_scheduled(sge->netdev)) { + struct respQ_e *e = &q->entries[q->cidx]; + + if (e->GenerationBit == q->genbit) { + if (e->DataValid || + process_pure_responses(adapter, e)) { + if (likely(napi_schedule_prep(sge->netdev))) + __netif_rx_schedule(sge->netdev); + else + printk(KERN_CRIT + "NAPI schedule failure!\n"); + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; + goto unlock; + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) + printk(KERN_ERR "data interrupt while NAPI running\n"); + + handled = t1_slow_intr_handler(adapter); + if (!handled) + sge->stats.unhandled_irqs++; + unlock: + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(handled != 0); +} + +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + int work_done; + struct respQ_e *e; + struct adapter *adapter = cookie; + struct respQ *Q = &adapter->sge->respQ; + + spin_lock(&adapter->async_lock); + e = &Q->entries[Q->cidx]; + prefetch(e); + + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + if (likely(e->GenerationBit == Q->genbit)) + work_done = process_responses(adapter, -1); + else + work_done = t1_slow_intr_handler(adapter); + + /* + * The unconditional clearing of the PL_CAUSE above may have raced + * with DMA completion and the corresponding generation of a response + * to cause us to miss the resulting data interrupt. The next write + * is also unconditional to recover the missed interrupt and render + * this race harmless. + */ + writel(Q->cidx, adapter->regs + A_SG_SLEEPING); + + if (!work_done) + adapter->sge->stats.unhandled_irqs++; + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(work_done != 0); +} + +intr_handler_t t1_select_intr_handler(adapter_t *adapter) +{ + return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + + { /* Ethernet packet */ + if (unlikely(credits < count)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[3]++; + spin_unlock(&q->lock); + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return 1; + } + if (unlikely(credits - count < q->stop_thres)) { + sge->stats.cmdQ_full[3]++; + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + } + } + q->in_use += count; + genbit = q->genbit; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; + } + spin_unlock(&q->lock); + + write_tx_descs(adapter, skb, pidx, genbit, q); + + /* + * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring + * the doorbell if the Q is asleep. There is a natural race, where + * the hardware is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + */ + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + } + return 0; +} + +#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) + +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + +/* + * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. + */ +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; + struct sge *sge = adapter->sge; + struct cpl_tx_pkt *cpl; + +#ifdef NETIF_F_TSO + if (skb_shinfo(skb)->tso_size) { + int eth_type; + struct cpl_tx_pkt_lso *hdr; + + st->tso++; + + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + + hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr)); + hdr->opcode = CPL_TX_PKT_LSO; + hdr->ip_csum_dis = hdr->l4_csum_dis = 0; + hdr->ip_hdr_words = skb->nh.iph->ihl; + hdr->tcp_hdr_words = skb->h.th->doff; + hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, + skb_shinfo(skb)->tso_size)); + hdr->len = htonl(skb->len - sizeof(*hdr)); + cpl = (struct cpl_tx_pkt *)hdr; + sge->stats.tx_lso_pkts++; + } else +#endif + { + /* + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. + */ + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + dev_kfree_skb_any(skb); + return NET_XMIT_SUCCESS; + } + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. + * Complain when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < + dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR "%s: inadequate headroom in " + "Tx packet\n", dev->name); + skb = skb_realloc_headroom(skb, sizeof(*cpl)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } + + if (!(adapter->flags & UDP_CSUM_CAPABLE) && + skb->ip_summed == CHECKSUM_HW && + skb->nh.iph->protocol == IPPROTO_UDP) + if (unlikely(skb_checksum_help(skb, 0))) { + dev_kfree_skb_any(skb); + return -ENOMEM; + } + + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if (unlikely(!adapter->sge->espibug_skb)) { + if (skb->protocol == htons(ETH_P_ARP) && + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } + } + + cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl)); + cpl->opcode = CPL_TX_PKT; + cpl->ip_csum_dis = 1; /* SW calculates IP csum */ + cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; + /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_reg_pkts++; + } + cpl->iff = dev->if_port; + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { + cpl->vlan_valid = 1; + cpl->vlan = htons(vlan_tx_tag_get(skb)); + st->vlan_insert++; + } else +#endif + cpl->vlan_valid = 0; + + dev->trans_start = jiffies; + return t1_sge_tx(skb, adapter, 0, dev); +} + +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(unsigned long data) +{ + int i; + struct sge *sge = (struct sge *)data; + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; + + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) /* flush pending credits */ + writel(F_CMDQ0_ENABLE, + sge->adapter->regs + A_SG_DOORBELL); + + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->netdev->poll = t1_poll; + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); + return 0; +} + +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) +{ + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} + +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + writel(0, sge->adapter->regs + A_SG_CONTROL); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); +} + +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) +{ + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *sge = adapter->sge; + + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb; + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + init_timer(&sge->tx_reclaim_timer); + sge->tx_reclaim_timer.data = (unsigned long)sge; + sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; + + if (is_T2(sge->adapter)) { + init_timer(&sge->espibug_timer); + sge->espibug_timer.function = (void *)&espibug_workaround; + sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + p->polling = 0; + + return sge; +} diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h new file mode 100644 index 00000000000..434b2558685 --- /dev/null +++ b/drivers/net/chelsio/sge.h @@ -0,0 +1,105 @@ +/***************************************************************************** + * * + * File: sge.h * + * $Revision: 1.11 $ * + * $Date: 2005/06/21 22:10:55 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_SGE_H_ +#define _CXGB_SGE_H_ + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <asm/byteorder.h> + +#ifndef IRQ_RETVAL +#define IRQ_RETVAL(x) +typedef void irqreturn_t; +#endif + +typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *); + +struct sge_intr_counts { + unsigned int respQ_empty; /* # times respQ empty */ + unsigned int respQ_overflow; /* # respQ overflow (fatal) */ + unsigned int freelistQ_empty; /* # times freelist empty */ + unsigned int pkt_too_big; /* packet too large (fatal) */ + unsigned int pkt_mismatch; + unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ + unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ + unsigned int ethernet_pkts; /* # of Ethernet packets received */ + unsigned int offload_pkts; /* # of offload packets received */ + unsigned int offload_bundles; /* # of offload pkt bundles delivered */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ + unsigned int tx_ipfrags; + unsigned int tx_reg_pkts; + unsigned int tx_lso_pkts; + unsigned int tx_do_cksum; +}; + +struct sge_port_stats { + unsigned long rx_cso_good; /* # of successful RX csum offloads */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_xtract; /* # of VLAN tag extractions */ + unsigned long vlan_insert; /* # of VLAN tag extractions */ + unsigned long tso; /* # of TSO requests */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ +}; + +struct sk_buff; +struct net_device; +struct adapter; +struct sge_params; +struct sge; + +struct sge *t1_sge_create(struct adapter *, struct sge_params *); +int t1_sge_configure(struct sge *, struct sge_params *); +int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); +void t1_sge_destroy(struct sge *); +intr_handler_t t1_select_intr_handler(adapter_t *adapter); +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *netdev); +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); +void t1_set_vlan_accel(struct adapter *adapter, int on_off); +void t1_sge_start(struct sge *); +void t1_sge_stop(struct sge *); +int t1_sge_intr_error_handler(struct sge *); +void t1_sge_intr_enable(struct sge *); +void t1_sge_intr_disable(struct sge *); +void t1_sge_intr_clear(struct sge *); +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); + +#endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c new file mode 100644 index 00000000000..1ebb5d149ae --- /dev/null +++ b/drivers/net/chelsio/subr.c @@ -0,0 +1,812 @@ +/***************************************************************************** + * * + * File: subr.c * + * $Revision: 1.27 $ * + * $Date: 2005/06/22 01:08:36 $ * + * Description: * + * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "elmer0.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "espi.h" + +/** + * t1_wait_op_done - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. Returns %0 if the operation completes and %1 + * otherwise. + */ +static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, + int attempts, int delay) +{ + while (1) { + u32 val = readl(adapter->regs + reg) & mask; + + if (!!val == polarity) + return 0; + if (--attempts == 0) + return 1; + if (delay) + udelay(delay); + } +} + +#define TPI_ATTEMPTS 50 + +/* + * Write a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int tpi_busy; + + writel(addr, adapter->regs + A_TPI_ADDR); + writel(value, adapter->regs + A_TPI_WR_DATA); + writel(F_TPIWR, adapter->regs + A_TPI_CSR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI write to 0x%x failed\n", + adapter->name, addr); + return tpi_busy; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int ret; + + spin_lock(&(adapter)->tpi_lock); + ret = __t1_tpi_write(adapter, addr, value); + spin_unlock(&(adapter)->tpi_lock); + return ret; +} + +/* + * Read a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int tpi_busy; + + writel(addr, adapter->regs + A_TPI_ADDR); + writel(0, adapter->regs + A_TPI_CSR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI read from 0x%x failed\n", + adapter->name, addr); + else + *valp = readl(adapter->regs + A_TPI_RD_DATA); + return tpi_busy; +} + +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int ret; + + spin_lock(&(adapter)->tpi_lock); + ret = __t1_tpi_read(adapter, addr, valp); + spin_unlock(&(adapter)->tpi_lock); + return ret; +} + +/* + * Called when a port's link settings change to propagate the new values to the + * associated PHY and MAC. After performing the common tasks it invokes an + * OS-specific handler. + */ +/* static */ void link_changed(adapter_t *adapter, int port_id) +{ + int link_ok, speed, duplex, fc; + struct cphy *phy = adapter->port[port_id].phy; + struct link_config *lc = &adapter->port[port_id].link_config; + + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + + lc->speed = speed < 0 ? SPEED_INVALID : speed; + lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; + if (!(lc->requested_fc & PAUSE_AUTONEG)) + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { + /* Set MAC speed, duplex, and flow control to match PHY. */ + struct cmac *mac = adapter->port[port_id].mac; + + mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); + lc->fc = (unsigned char)fc; + } + t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc); +} + +static int t1_pci_intr_handler(adapter_t *adapter) +{ + u32 pcix_cause; + + pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); + + if (pcix_cause) { + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, + pcix_cause); + t1_fatal_err(adapter); /* PCI errors are fatal */ + } + return 0; +} + + +/* + * Wait until Elmer's MI1 interface is ready for new operations. + */ +static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg) +{ + int attempts = 100, busy; + + do { + u32 val; + + __t1_tpi_read(adapter, mi1_reg, &val); + busy = val & F_MI1_OP_BUSY; + if (busy) + udelay(10); + } while (busy && --attempts); + if (busy) + CH_ALERT("%s: MDIO operation timed out\n", + adapter->name); + return busy; +} + +/* + * MI1 MDIO initialization. + */ +static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) +{ + u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1; + u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) | + V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv); + + if (!(bi->caps & SUPPORTED_10000baseT_Full)) + val |= V_MI1_SOF(1); + t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); +} + +static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + spin_lock(&(adapter)->tpi_lock); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the operation we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Read the data. */ + __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); + spin_unlock(&(adapter)->tpi_lock); + return 0; +} + +static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + spin_lock(&(adapter)->tpi_lock); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the data. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + spin_unlock(&(adapter)->tpi_lock); + return 0; +} + +static struct mdio_ops mi1_mdio_ext_ops = { + mi1_mdio_init, + mi1_mdio_ext_read, + mi1_mdio_ext_write +}; + +enum { + CH_BRD_N110_1F, + CH_BRD_N210_1F, +}; + +static struct board_info t1_board[] = { + +{ CHBT_BOARD_N110, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N110 1x10GBaseX NIC" }, + +{ CHBT_BOARD_N210, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N210 1x10GBaseX NIC" }, + +}; + +struct pci_device_id t1_pci_tbl[] = { + CH_DEVICE(7, 0, CH_BRD_N110_1F), + CH_DEVICE(10, 1, CH_BRD_N210_1F), + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + +/* + * Return the board_info structure with a given index. Out-of-range indices + * return NULL. + */ +const struct board_info *t1_get_board_info(unsigned int board_id) +{ + return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; +} + +struct chelsio_vpd_t { + u32 format_version; + u8 serial_number[16]; + u8 mac_base_address[6]; + u8 pad[2]; /* make multiple-of-4 size requirement explicit */ +}; + +#define EEPROMSIZE (8 * 1024) +#define EEPROM_MAX_POLL 4 + +/* + * Read SEEPROM. A zero is written to the flag register when the addres is + * written to the Control register. The hardware device will set the flag to a + * one when 4B have been transferred to the Data register. + */ +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data) +{ + int i = EEPROM_MAX_POLL; + u16 val; + + if (addr >= EEPROMSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr); + do { + udelay(50); + pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val); + } while (!(val & F_VPD_OP_FLAG) && --i); + + if (!(val & F_VPD_OP_FLAG)) { + CH_ERR("%s: reading EEPROM address 0x%x failed\n", + adapter->name, addr); + return -EIO; + } + pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd) +{ + int addr, ret = 0; + + for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32)) + ret = t1_seeprom_read(adapter, addr, + (u32 *)((u8 *)vpd + addr)); + + return ret; +} + +/* + * Read a port's MAC address from the VPD ROM. + */ +static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[]) +{ + struct chelsio_vpd_t vpd; + + if (t1_eeprom_vpd_get(adapter, &vpd)) + return 1; + memcpy(mac_addr, vpd.mac_base_address, 5); + mac_addr[5] = vpd.mac_base_address[5] + index; + return 0; +} + +/* + * Set up the MAC/PHY according to the requested link settings. + * + * If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired and reset. + * + * If the PHY does not auto-negotiate we just reset it. + * + * If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) +{ + unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); + if (fc) { + lc->advertising |= ADVERTISED_ASYM_PAUSE; + if (fc == (PAUSE_RX | PAUSE_TX)) + lc->advertising |= ADVERTISED_PAUSE; + } + phy->ops->advertise(phy, lc->advertising); + + if (lc->autoneg == AUTONEG_DISABLE) { + lc->speed = lc->requested_speed; + lc->duplex = lc->requested_duplex; + lc->fc = (unsigned char)fc; + mac->ops->set_speed_duplex_fc(mac, lc->speed, + lc->duplex, fc); + /* Also disables autoneg */ + phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); + phy->ops->reset(phy, 0); + } else + phy->ops->autoneg_enable(phy); /* also resets PHY */ + } else { + mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); + lc->fc = (unsigned char)fc; + phy->ops->reset(phy, 0); + } + return 0; +} + +/* + * External interrupt handler for boards using elmer0. + */ +int elmer0_ext_intr_handler(adapter_t *adapter) +{ + struct cphy *phy; + int phy_cause; + u32 cause; + + t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); + + switch (board_info(adapter)->board) { + case CHBT_BOARD_N210: + case CHBT_BOARD_N110: + if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ + phy = adapter->port[0].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + link_changed(adapter, 0); + } + break; + } + t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); + return 0; +} + +/* Enables all interrupts. */ +void t1_interrupts_enable(adapter_t *adapter) +{ + unsigned int i; + u32 pl_intr; + + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; + + t1_sge_intr_enable(adapter->sge); + if (adapter->espi) { + adapter->slow_intr_mask |= F_PL_INTR_ESPI; + t1_espi_intr_enable(adapter->espi); + } + + /* Enable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy); + } + + /* Enable PCIX & external chip interrupts on ASIC boards. */ + pl_intr = readl(adapter->regs + A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); + + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); +} + +/* Disables all interrupts. */ +void t1_interrupts_disable(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_disable(adapter->sge); + if (adapter->espi) + t1_espi_intr_disable(adapter->espi); + + /* Disable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy); + } + + /* Disable PCIX & external chip interrupts. */ + writel(0, adapter->regs + A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); + + adapter->slow_intr_mask = 0; +} + +/* Clears all interrupts */ +void t1_interrupts_clear(adapter_t* adapter) +{ + unsigned int i; + u32 pl_intr; + + + t1_sge_intr_clear(adapter->sge); + if (adapter->espi) + t1_espi_intr_clear(adapter->espi); + + /* Clear MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy); + } + + /* Enable interrupts for external devices. */ + pl_intr = readl(adapter->regs + A_PL_CAUSE); + + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); +} + +/* + * Slow path interrupt handler for ASICs. + */ +int t1_slow_intr_handler(adapter_t *adapter) +{ + u32 cause = readl(adapter->regs + A_PL_CAUSE); + + cause &= adapter->slow_intr_mask; + if (!cause) + return 0; + if (cause & F_PL_INTR_SGE_ERR) + t1_sge_intr_error_handler(adapter->sge); + if (cause & F_PL_INTR_ESPI) + t1_espi_intr_handler(adapter->espi); + if (cause & F_PL_INTR_PCIX) + t1_pci_intr_handler(adapter); + if (cause & F_PL_INTR_EXT) + t1_elmer0_ext_intr(adapter); + + /* Clear the interrupts just processed. */ + writel(cause, adapter->regs + A_PL_CAUSE); + (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ + return 1; +} + +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) +{ + u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_IP_CSUM, enable); +} + +void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_UDP_CSUM, enable); +} + +void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_TCP_CSUM, enable); +} + +static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +{ + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, adapter->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + adapter->regs + A_TP_OUT_CONFIG); + + val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(adapter)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + adapter->regs + A_TP_TX_DROP_CONFIG); + } + + writel(F_TP_RESET, adapter->regs + A_TP_RESET); +} + +int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p) +{ + p->chip_version = bi->chip_term; + if (p->chip_version == CHBT_TERM_T1 || + p->chip_version == CHBT_TERM_T2) { + u32 val = readl(adapter->regs + A_TP_PC_CONFIG); + + val = G_TP_PC_REV(val); + if (val == 2) + p->chip_revision = TERM_T1B; + else if (val == 3) + p->chip_revision = TERM_T2; + else + return -1; + } else + return -1; + return 0; +} + +/* + * Enable board components other than the Chelsio chip, such as external MAC + * and PHY. + */ +static int board_init(adapter_t *adapter, const struct board_info *bi) +{ + switch (bi->board) { + case CHBT_BOARD_N110: + case CHBT_BOARD_N210: + writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); + break; + } + return 0; +} + +/* + * Initialize and configure the Terminator HW modules. Note that external + * MAC and PHYs are initialized separately. + */ +int t1_init_hw_modules(adapter_t *adapter) +{ + int err = -EIO; + const struct board_info *bi = board_info(adapter); + + if (!bi->clock_mc4) { + u32 val = readl(adapter->regs + A_MC4_CFG); + + writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); + writel(F_M_BUS_ENABLE | F_TCAM_RESET, + adapter->regs + A_MC5_CONFIG); + } + + if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, + bi->espi_nports)) + goto out_err; + + t1_tp_reset(adapter, bi->clock_core); + + err = t1_sge_configure(adapter->sge, &adapter->params.sge); + if (err) + goto out_err; + + err = 0; + out_err: + return err; +} + +/* + * Determine a card's PCI mode. + */ +static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode; + + pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode); + p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)]; + p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32; + p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0; +} + +/* + * Release the structures holding the SW per-Terminator-HW-module state. + */ +void t1_free_sw_modules(adapter_t *adapter) +{ + unsigned int i; + + for_each_port(adapter, i) { + struct cmac *mac = adapter->port[i].mac; + struct cphy *phy = adapter->port[i].phy; + + if (mac) + mac->ops->destroy(mac); + if (phy) + phy->ops->destroy(phy); + } + + if (adapter->sge) + t1_sge_destroy(adapter->sge); + if (adapter->espi) + t1_espi_destroy(adapter->espi); +} + +static void __devinit init_link_config(struct link_config *lc, + const struct board_info *bi) +{ + lc->supported = bi->caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + + +/* + * Allocate and initialize the data structures that hold the SW state of + * the Terminator HW modules. + */ +int __devinit t1_init_sw_modules(adapter_t *adapter, + const struct board_info *bi) +{ + unsigned int i; + + adapter->params.brd_info = bi; + adapter->params.nports = bi->port_number; + adapter->params.stats_update_period = bi->gmac->stats_update_period; + + adapter->sge = t1_sge_create(adapter, &adapter->params.sge); + if (!adapter->sge) { + CH_ERR("%s: SGE initialization failed\n", + adapter->name); + goto error; + } + + if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { + CH_ERR("%s: ESPI initialization failed\n", + adapter->name); + goto error; + } + + board_init(adapter, bi); + bi->mdio_ops->init(adapter, bi); + if (bi->gphy->reset) + bi->gphy->reset(adapter); + if (bi->gmac->reset) + bi->gmac->reset(adapter); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct cmac *mac; + int phy_addr = bi->mdio_phybaseaddr + i; + + adapter->port[i].phy = bi->gphy->create(adapter, phy_addr, + bi->mdio_ops); + if (!adapter->port[i].phy) { + CH_ERR("%s: PHY %d initialization failed\n", + adapter->name, i); + goto error; + } + + adapter->port[i].mac = mac = bi->gmac->create(adapter, i); + if (!mac) { + CH_ERR("%s: MAC %d initialization failed\n", + adapter->name, i); + goto error; + } + + /* + * Get the port's MAC addresses either from the EEPROM if one + * exists or the one hardcoded in the MAC. + */ + if (vpd_macaddress_get(adapter, i, hw_addr)) { + CH_ERR("%s: could not read MAC address from VPD ROM\n", + adapter->port[i].dev->name); + goto error; + } + memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); + init_link_config(&adapter->port[i].link_config, bi); + } + + get_pci_mode(adapter, &adapter->params.pci); + t1_interrupts_clear(adapter); + return 0; + + error: + t1_free_sw_modules(adapter); + return -1; +} diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h new file mode 100644 index 00000000000..81816c2b708 --- /dev/null +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -0,0 +1,213 @@ +/***************************************************************************** + * * + * File: suni1x10gexp_regs.h * + * $Revision: 1.9 $ * + * $Date: 2005/06/22 00:17:04 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: PMC/SIERRA * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_SUNI1x10GEXP_REGS_H_ +#define _CXGB_SUNI1x10GEXP_REGS_H_ + +/******************************************************************************/ +/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ +/******************************************************************************/ +/* Refer to the Register Bit Masks bellow for the naming of each register and */ +/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */ +/******************************************************************************/ + +#define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004 +#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D +#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102 +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042 +#define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043 +#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045 +#define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046 +#define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047 +#define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089 +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7 +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8 +#define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2 0x2103 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3 0x2104 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0 0x2105 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209 +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282 +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042 +#define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043 +#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045 +#define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047 +#define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048 +#define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7 +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282 +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283 + +/******************************************************************************/ +/* -- End register offset definitions -- */ +/******************************************************************************/ + +/******************************************************************************/ +/** SUNI-1x10GE-XP REGISTER BIT MASKS **/ +/******************************************************************************/ + +/*---------------------------------------------------------------------------- + * Register 0x0004: S/UNI-1x10GE-XP Device Status + * Bit 9 TOP_SXRA_EXPIRED + * Bit 8 TOP_MDIO_BUSY + * Bit 7 TOP_DTRB + * Bit 6 TOP_EXPIRED + * Bit 5 TOP_PAUSED + * Bit 4 TOP_PL4_ID_DOOL + * Bit 3 TOP_PL4_IS_DOOL + * Bit 2 TOP_PL4_ID_ROOL + * Bit 1 TOP_PL4_IS_ROOL + * Bit 0 TOP_PL4_OUT_ROOL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL 0x0002 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x000E:PM3393 Global interrupt enable + * Bit 15 TOP_INTE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000 + +/*---------------------------------------------------------------------------- + * Register 0x2040: RXXG Configuration 1 + * Bit 15 RXXG_RXEN + * Bit 14 RXXG_ROCF + * Bit 13 RXXG_PAD_STRIP + * Bit 10 RXXG_PUREP + * Bit 9 RXXG_LONGP + * Bit 8 RXXG_PARF + * Bit 7 RXXG_FLCHK + * Bit 5 RXXG_PASS_CTRL + * Bit 3 RXXG_CRC_STRIP + * Bit 2-0 RXXG_MIFG + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008 + +/*---------------------------------------------------------------------------- + * Register 0x2070: RXXG Address Filter Control 2 + * Bit 1 RXXG_PMODE + * Bit 0 RXXG_MHASH_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_PMODE 0x0002 +#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2100: MSTAT Control + * Bit 2 MSTAT_WRITE + * Bit 1 MSTAT_CLEAR + * Bit 0 MSTAT_SNAP + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002 +#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3040: TXXG Configuration Register 1 + * Bit 15 TXXG_TXEN0 + * Bit 13 TXXG_HOSTPAUSE + * Bit 12-7 TXXG_IPGT + * Bit 5 TXXG_32BIT_ALIGN + * Bit 4 TXXG_CRCEN + * Bit 3 TXXG_FCTX + * Bit 2 TXXG_FCRX + * Bit 1 TXXG_PADEN + * Bit 0 TXXG_SPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000 +#define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7 +#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020 +#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010 +#define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008 +#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 +#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 + +#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ + diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 6440a892bb8..e54fc10f684 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1140,7 +1140,7 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) } static int -dm9000_drv_suspend(struct device *dev, u32 state, u32 level) +dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level) { struct net_device *ndev = dev_get_drvdata(dev); diff --git a/drivers/net/e100.c b/drivers/net/e100.c index d0fa2448761..25cc20e415d 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.8-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) } #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ +#define E100_WAIT_SCB_FAST 20 /* delay like the old code */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) if(likely(!readb(&nic->csr->scb.cmd_lo))) break; cpu_relax(); - if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1))) + if(unlikely(i > E100_WAIT_SCB_FAST)) udelay(5); } if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) { @@ -902,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1006,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } +/********************************************************/ +/* Micro code for 8086:1229 Rev 8 */ +/********************************************************/ + +/* Parameter values for the D101M B-step */ +#define D101M_CPUSAVER_TIMER_DWORD 78 +#define D101M_CPUSAVER_BUNDLE_DWORD 65 +#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 + +#define D101M_B_RCVBUNDLE_UCODE \ +{\ +0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ +0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ +0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ +0x00380438, 0x00000000, 0x00140000, 0x00380555, \ +0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ +0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ +0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ +0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ +0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ +0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ +0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ +0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ +0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ +0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ +0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ +0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ +0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ +0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ +0x00380559, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ +0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ +0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ +} + +/********************************************************/ +/* Micro code for 8086:1229 Rev 9 */ +/********************************************************/ + +/* Parameter values for the D101S */ +#define D101S_CPUSAVER_TIMER_DWORD 78 +#define D101S_CPUSAVER_BUNDLE_DWORD 67 +#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 + +#define D101S_RCVBUNDLE_UCODE \ +{\ +0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ +0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ +0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ +0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ +0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ +0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ +0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ +0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ +0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ +0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ +0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ +0x00101313, 0x00380700, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ +0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ +0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ +0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ +0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ +0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ +0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ +0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ +0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00130831, \ +0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ +0x00041000, 0x00010004, 0x00380700 \ +} + +/********************************************************/ +/* Micro code for the 8086:1229 Rev F/10 */ +/********************************************************/ + +/* Parameter values for the D102 E-step */ +#define D102_E_CPUSAVER_TIMER_DWORD 42 +#define D102_E_CPUSAVER_BUNDLE_DWORD 54 +#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 + +#define D102_E_RCVBUNDLE_UCODE \ +{\ +0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ +0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ +0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ +0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ +0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ +0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ +0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +} + static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { - int i; - static const u32 ucode[UCODE_SIZE] = { - /* NFS packets are misinterpreted as TCO packets and - * incorrectly routed to the BMC over SMBus. This - * microcode patch checks the fragmented IP bit in the - * NFS/UDP header to distinguish between NFS and TCO. */ - 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, - 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, - 0x00906EFD, 0x00900EFD, 0x00E00EF8, - }; +/* *INDENT-OFF* */ + static struct { + u32 ucode[UCODE_SIZE + 1]; + u8 mac; + u8 timer_dword; + u8 bundle_dword; + u8 min_size_dword; + } ucode_opts[] = { + { D101M_B_RCVBUNDLE_UCODE, + mac_82559_D101M, + D101M_CPUSAVER_TIMER_DWORD, + D101M_CPUSAVER_BUNDLE_DWORD, + D101M_CPUSAVER_MIN_SIZE_DWORD }, + { D101S_RCVBUNDLE_UCODE, + mac_82559_D101S, + D101S_CPUSAVER_TIMER_DWORD, + D101S_CPUSAVER_BUNDLE_DWORD, + D101S_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_F, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_10, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { {0}, 0, 0, 0, 0} + }, *opts; +/* *INDENT-ON* */ + +#define BUNDLESMALL 1 +#define BUNDLEMAX 50 +#define INTDELAY 15000 + + opts = ucode_opts; + + /* do not load u-code for ICH devices */ + if (nic->flags & ich) + return; + + /* Search for ucode match against h/w rev_id */ + while (opts->mac) { + if (nic->mac == opts->mac) { + int i; + u32 *ucode = opts->ucode; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= + (u16) INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= + (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for(i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + return; + } + opts++; + } - if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - } else - cb->command = cpu_to_le16(cb_nop); + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, @@ -1307,14 +1496,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, { cb->command = nic->tx_command; /* interrupt every 16 packets regardless of delay */ - if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; + if((nic->cbs_avail & ~15) == nic->cbs_avail) + cb->command |= cpu_to_le16(cb_i); cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - // check for mapping failure? + /* check for mapping failure? */ cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1539,7 +1729,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Don't indicate if hardware indicates errors */ nic->net_stats.rx_dropped++; dev_kfree_skb_any(skb); - } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) { + } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) { /* Don't indicate oversized frames */ nic->rx_over_length_errors++; nic->net_stats.rx_dropped++; @@ -1706,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget) static void e100_netpoll(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + e100_disable_irq(nic); e100_intr(nic->pdev->irq, netdev, NULL); e100_tx_clean(nic); @@ -2108,6 +2299,8 @@ static void e100_diag_test(struct net_device *netdev, } for(i = 0; i < E100_TEST_LEN; i++) test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; + + msleep_interruptible(4 * 1000); } static int e100_phys_id(struct net_device *netdev, u32 data) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 93e9f878875..51c2b3a18b6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1270,7 +1270,7 @@ struct e1000_hw_stats { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t *hw_addr; + uint8_t __iomem *hw_addr; uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 9b596e0bbf9..7c8a0a22dcd 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -162,7 +162,7 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -static int e1000_suspend(struct pci_dev *pdev, uint32_t state); +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); #ifdef CONFIG_PM static int e1000_resume(struct pci_dev *pdev); #endif @@ -3642,7 +3642,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) } static int -e1000_suspend(struct pci_dev *pdev, uint32_t state) +e1000_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3726,9 +3726,7 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) } pci_disable_device(pdev); - - state = (state > 0) ? 3 : 0; - pci_set_power_state(pdev, state); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } @@ -3741,13 +3739,13 @@ e1000_resume(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t manc, ret_val, swsm; - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); ret_val = pci_enable_device(pdev); pci_set_master(pdev); - pci_enable_wake(pdev, 3, 0); - pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); e1000_reset(adapter); E1000_WRITE_REG(&adapter->hw, WUS, ~0); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 7d93948aec8..d6eefdb71c1 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1372,7 +1372,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) /* synchronized against open : rtnl_lock() held by caller */ if (netif_running(dev)) { - u8 *base = get_hwbase(dev); + u8 __iomem *base = get_hwbase(dev); /* * It seems that the nic preloads valid ring entries into an * internal buffer. The procedure for flushing everything is @@ -1423,7 +1423,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) static void nv_copy_mac_to_hw(struct net_device *dev) { - u8 *base = get_hwbase(dev); + u8 __iomem *base = get_hwbase(dev); u32 mac[2]; mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) + diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index d9df1d9a573..bc9a3bf8d56 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -204,6 +204,10 @@ KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu> #define RUN_AT(x) (jiffies + (x)) +#ifndef ADDRLEN +#define ADDRLEN 32 +#endif + /* Condensed bus+endian portability operations. */ #if ADDRLEN == 64 #define cpu_to_leXX(addr) cpu_to_le64(addr) diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 10125a1dba2..dd89bda1f13 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -4,10 +4,10 @@ * Description: Driver for the SMC Infrared Communications Controller * Status: Experimental. * Author: Daniele Peri (peri@csai.unipa.it) - * Created at: - * Modified at: - * Modified by: - * + * Created at: + * Modified at: + * Modified by: + * * Copyright (c) 2002 Daniele Peri * All Rights Reserved. * Copyright (c) 2002 Jean Tourrilhes @@ -17,26 +17,26 @@ * * Copyright (c) 2001 Stefani Seibold * Copyright (c) 1999-2001 Dag Brattli - * Copyright (c) 1998-1999 Thomas Davis, + * Copyright (c) 1998-1999 Thomas Davis, * * and irport.c: * * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved. * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ @@ -68,24 +68,42 @@ #include "smsc-ircc2.h" #include "smsc-sio.h" + +MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>"); +MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); +MODULE_LICENSE("GPL"); + +static int ircc_dma = 255; +module_param(ircc_dma, int, 0); +MODULE_PARM_DESC(ircc_dma, "DMA channel"); + +static int ircc_irq = 255; +module_param(ircc_irq, int, 0); +MODULE_PARM_DESC(ircc_irq, "IRQ line"); + +static int ircc_fir; +module_param(ircc_fir, int, 0); +MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); + +static int ircc_sir; +module_param(ircc_sir, int, 0); +MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); + +static int ircc_cfg; +module_param(ircc_cfg, int, 0); +MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); + +static int ircc_transceiver; +module_param(ircc_transceiver, int, 0); +MODULE_PARM_DESC(ircc_transceiver, "Transceiver type"); + /* Types */ struct smsc_transceiver { char *name; - void (*set_for_speed)(int fir_base, u32 speed); + void (*set_for_speed)(int fir_base, u32 speed); int (*probe)(int fir_base); }; -typedef struct smsc_transceiver smsc_transceiver_t; - -#if 0 -struct smc_chip { - char *name; - u16 flags; - u8 devid; - u8 rev; -}; -typedef struct smc_chip smc_chip_t; -#endif struct smsc_chip { char *name; @@ -96,20 +114,18 @@ struct smsc_chip { u8 devid; u8 rev; }; -typedef struct smsc_chip smsc_chip_t; struct smsc_chip_address { unsigned int cfg_base; unsigned int type; }; -typedef struct smsc_chip_address smsc_chip_address_t; /* Private data for each instance */ struct smsc_ircc_cb { struct net_device *netdev; /* Yes! we are some kind of netdevice */ struct net_device_stats stats; struct irlap_cb *irlap; /* The link layer we are binded to */ - + chipio_t io; /* IrDA controller information */ iobuff_t tx_buff; /* Transmit buffer */ iobuff_t rx_buff; /* Receive buffer */ @@ -119,7 +135,7 @@ struct smsc_ircc_cb { struct qos_info qos; /* QoS capabilities for this device */ spinlock_t lock; /* For serializing operations */ - + __u32 new_speed; __u32 flags; /* Interface flags */ @@ -127,18 +143,20 @@ struct smsc_ircc_cb { int tx_len; /* Number of frames in tx_buff */ int transceiver; - struct pm_dev *pmdev; + struct platform_device *pldev; }; /* Constants */ -static const char *driver_name = "smsc-ircc2"; -#define DIM(x) (sizeof(x)/(sizeof(*(x)))) +#define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2" + #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1 -#define SMSC_IRCC2_C_NET_TIMEOUT 0 +#define SMSC_IRCC2_C_NET_TIMEOUT 0 #define SMSC_IRCC2_C_SIR_STOP 0 +static const char *driver_name = SMSC_IRCC2_DRIVER_NAME; + /* Prototypes */ static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq); @@ -147,15 +165,15 @@ static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self); static void smsc_ircc_init_chip(struct smsc_ircc_cb *self); static int __exit smsc_ircc_close(struct smsc_ircc_cb *self); -static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self, int iobase); -static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self, int iobase); +static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self); +static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self); static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self); static int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev); static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev); -static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int iobase, int bofs); -static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self, int iobase); -static void smsc_ircc_change_speed(void *priv, u32 speed); -static void smsc_ircc_set_sir_speed(void *priv, u32 speed); +static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs); +static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self); +static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed); +static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed); static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev); static void smsc_ircc_sir_start(struct smsc_ircc_cb *self); @@ -171,7 +189,6 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cm static void smsc_ircc_timeout(struct net_device *dev); #endif static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev); -static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data); static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self); static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self); static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed); @@ -179,9 +196,9 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); /* Probing */ static int __init smsc_ircc_look_for_chips(void); -static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type); -static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfg_base, char *type); -static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cfg_base, char *type); +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); +static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); +static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); static int __init smsc_superio_fdc(unsigned short cfg_base); static int __init smsc_superio_lpc(unsigned short cfg_base); @@ -196,21 +213,26 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); /* Power Management */ -static void smsc_ircc_suspend(struct smsc_ircc_cb *self); -static void smsc_ircc_wakeup(struct smsc_ircc_cb *self); -static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data); +static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level); +static int smsc_ircc_resume(struct device *dev, u32 level); +static struct device_driver smsc_ircc_driver = { + .name = SMSC_IRCC2_DRIVER_NAME, + .bus = &platform_bus_type, + .suspend = smsc_ircc_suspend, + .resume = smsc_ircc_resume, +}; /* Transceivers for SMSC-ircc */ -static smsc_transceiver_t smsc_transceivers[]= +static struct smsc_transceiver smsc_transceivers[] = { - { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800}, - { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select}, - { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc}, - { NULL, NULL} + { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 }, + { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select }, + { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc }, + { NULL, NULL } }; -#define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (DIM(smsc_transceivers)-1) +#define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1) /* SMC SuperIO chipsets definitions */ @@ -221,7 +243,7 @@ static smsc_transceiver_t smsc_transceivers[]= #define FIR 4 /* SuperIO Chip has fast IRDA */ #define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */ -static smsc_chip_t __initdata fdc_chips_flat[]= +static struct smsc_chip __initdata fdc_chips_flat[] = { /* Base address 0x3f0 or 0x370 */ { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */ @@ -235,7 +257,7 @@ static smsc_chip_t __initdata fdc_chips_flat[]= { NULL } }; -static smsc_chip_t __initdata fdc_chips_paged[]= +static struct smsc_chip __initdata fdc_chips_paged[] = { /* Base address 0x3f0 or 0x370 */ { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 }, @@ -254,7 +276,7 @@ static smsc_chip_t __initdata fdc_chips_paged[]= { NULL } }; -static smsc_chip_t __initdata lpc_chips_flat[]= +static struct smsc_chip __initdata lpc_chips_flat[] = { /* Base address 0x2E or 0x4E */ { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 }, @@ -262,7 +284,7 @@ static smsc_chip_t __initdata lpc_chips_flat[]= { NULL } }; -static smsc_chip_t __initdata lpc_chips_paged[]= +static struct smsc_chip __initdata lpc_chips_paged[] = { /* Base address 0x2E or 0x4E */ { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 }, @@ -281,33 +303,25 @@ static smsc_chip_t __initdata lpc_chips_paged[]= #define SMSCSIO_TYPE_FLAT 4 #define SMSCSIO_TYPE_PAGED 8 -static smsc_chip_address_t __initdata possible_addresses[]= +static struct smsc_chip_address __initdata possible_addresses[] = { - {0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED}, - {0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED}, - {0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED}, - {0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED}, - {0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED}, - {0,0} + { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, + { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, + { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, + { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, + { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, + { 0, 0 } }; /* Globals */ -static struct smsc_ircc_cb *dev_self[] = { NULL, NULL}; - -static int ircc_irq=255; -static int ircc_dma=255; -static int ircc_fir=0; -static int ircc_sir=0; -static int ircc_cfg=0; -static int ircc_transceiver=0; - -static unsigned short dev_count=0; +static struct smsc_ircc_cb *dev_self[] = { NULL, NULL }; +static unsigned short dev_count; static inline void register_bank(int iobase, int bank) { - outb(((inb(iobase+IRCC_MASTER) & 0xf0) | (bank & 0x07)), - iobase+IRCC_MASTER); + outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)), + iobase + IRCC_MASTER); } @@ -327,34 +341,44 @@ static inline void register_bank(int iobase, int bank) */ static int __init smsc_ircc_init(void) { - int ret=-ENODEV; + int ret; IRDA_DEBUG(1, "%s\n", __FUNCTION__); - dev_count=0; - - if ((ircc_fir>0)&&(ircc_sir>0)) { + ret = driver_register(&smsc_ircc_driver); + if (ret) { + IRDA_ERROR("%s, Can't register driver!\n", driver_name); + return ret; + } + + dev_count = 0; + + if (ircc_fir > 0 && ircc_sir > 0) { IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir); IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir); - if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq) == 0) - return 0; - - return -ENODEV; - } + if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) + ret = -ENODEV; + } else { + ret = -ENODEV; + + /* try user provided configuration register base address */ + if (ircc_cfg > 0) { + IRDA_MESSAGE(" Overriding configuration address " + "0x%04x\n", ircc_cfg); + if (!smsc_superio_fdc(ircc_cfg)) + ret = 0; + if (!smsc_superio_lpc(ircc_cfg)) + ret = 0; + } - /* try user provided configuration register base address */ - if (ircc_cfg>0) { - IRDA_MESSAGE(" Overriding configuration address 0x%04x\n", - ircc_cfg); - if (!smsc_superio_fdc(ircc_cfg)) - ret = 0; - if (!smsc_superio_lpc(ircc_cfg)) + if (smsc_ircc_look_for_chips() > 0) ret = 0; } - - if(smsc_ircc_look_for_chips()>0) ret = 0; - + + if (ret) + driver_unregister(&smsc_ircc_driver); + return ret; } @@ -369,15 +393,15 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u struct smsc_ircc_cb *self; struct net_device *dev; int err; - + IRDA_DEBUG(1, "%s\n", __FUNCTION__); err = smsc_ircc_present(fir_base, sir_base); - if(err) + if (err) goto err_out; - + err = -ENOMEM; - if (dev_count > DIM(dev_self)) { + if (dev_count >= ARRAY_SIZE(dev_self)) { IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__); goto err_out1; } @@ -396,14 +420,14 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u dev->hard_start_xmit = smsc_ircc_hard_xmit_sir; #if SMSC_IRCC2_C_NET_TIMEOUT dev->tx_timeout = smsc_ircc_timeout; - dev->watchdog_timeo = HZ*2; /* Allow enough time for speed change */ + dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */ #endif dev->open = smsc_ircc_net_open; dev->stop = smsc_ircc_net_close; dev->do_ioctl = smsc_ircc_net_ioctl; dev->get_stats = smsc_ircc_net_get_stats; - - self = dev->priv; + + self = netdev_priv(dev); self->netdev = dev; /* Make ifconfig display some details */ @@ -411,10 +435,10 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u dev->irq = self->io.irq = irq; /* Need to store self somewhere */ - dev_self[dev_count++] = self; + dev_self[dev_count] = self; spin_lock_init(&self->lock); - self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE; + self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE; self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE; self->rx_buff.head = @@ -442,33 +466,40 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u self->rx_buff.state = OUTSIDE_FRAME; self->tx_buff.data = self->tx_buff.head; self->rx_buff.data = self->rx_buff.head; - - smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq); + smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq); smsc_ircc_setup_qos(self); - smsc_ircc_init_chip(self); - - if(ircc_transceiver > 0 && - ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS) + + if (ircc_transceiver > 0 && + ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS) self->transceiver = ircc_transceiver; else smsc_ircc_probe_transceiver(self); err = register_netdev(self->netdev); - if(err) { + if (err) { IRDA_ERROR("%s, Network device registration failed!\n", driver_name); goto err_out4; } - self->pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, smsc_ircc_pmproc); - if (self->pmdev) - self->pmdev->data = self; + self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME, + dev_count, NULL, 0); + if (IS_ERR(self->pldev)) { + err = PTR_ERR(self->pldev); + goto err_out5; + } + dev_set_drvdata(&self->pldev->dev, self); IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); + dev_count++; return 0; + + err_out5: + unregister_netdev(self->netdev); + err_out4: dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); @@ -477,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u self->rx_buff.head, self->rx_buff_dma); err_out2: free_netdev(self->netdev); - dev_self[--dev_count] = NULL; + dev_self[dev_count] = NULL; err_out1: release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); @@ -511,16 +542,16 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) register_bank(fir_base, 3); - high = inb(fir_base+IRCC_ID_HIGH); - low = inb(fir_base+IRCC_ID_LOW); - chip = inb(fir_base+IRCC_CHIP_ID); - version = inb(fir_base+IRCC_VERSION); - config = inb(fir_base+IRCC_INTERFACE); + high = inb(fir_base + IRCC_ID_HIGH); + low = inb(fir_base + IRCC_ID_LOW); + chip = inb(fir_base + IRCC_CHIP_ID); + version = inb(fir_base + IRCC_VERSION); + config = inb(fir_base + IRCC_INTERFACE); dma = config & IRCC_INTERFACE_DMA_MASK; irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; - if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { - IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", + if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { + IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", __FUNCTION__, fir_base); goto out3; } @@ -529,6 +560,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) chip & 0x0f, version, fir_base, sir_base, dma, irq); return 0; + out3: release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); out2: @@ -543,16 +575,16 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) * Setup I/O * */ -static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, - unsigned int fir_base, unsigned int sir_base, +static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, + unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) { unsigned char config, chip_dma, chip_irq; register_bank(fir_base, 3); - config = inb(fir_base+IRCC_INTERFACE); - chip_dma = config & IRCC_INTERFACE_DMA_MASK; - chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; + config = inb(fir_base + IRCC_INTERFACE); + chip_dma = config & IRCC_INTERFACE_DMA_MASK; + chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; self->io.fir_base = fir_base; self->io.sir_base = sir_base; @@ -566,17 +598,15 @@ static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n", driver_name, chip_irq, irq); self->io.irq = irq; - } - else + } else self->io.irq = chip_irq; - + if (dma < 255) { if (dma != chip_dma) IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n", driver_name, chip_dma, dma); self->io.dma = dma; - } - else + } else self->io.dma = chip_dma; } @@ -591,7 +621,7 @@ static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self) { /* Initialize QoS for this device */ irda_init_max_qos_capabilies(&self->qos); - + self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); @@ -608,43 +638,43 @@ static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self) */ static void smsc_ircc_init_chip(struct smsc_ircc_cb *self) { - int iobase, ir_mode, ctrl, fast; - - IRDA_ASSERT( self != NULL, return; ); - iobase = self->io.fir_base; + int iobase, ir_mode, ctrl, fast; + + IRDA_ASSERT(self != NULL, return;); + iobase = self->io.fir_base; ir_mode = IRCC_CFGA_IRDA_SIR_A; ctrl = 0; fast = 0; register_bank(iobase, 0); - outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER); - outb(0x00, iobase+IRCC_MASTER); + outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); + outb(0x00, iobase + IRCC_MASTER); register_bank(iobase, 1); - outb(((inb(iobase+IRCC_SCE_CFGA) & 0x87) | ir_mode), - iobase+IRCC_SCE_CFGA); + outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | ir_mode), + iobase + IRCC_SCE_CFGA); #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */ - outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), - iobase+IRCC_SCE_CFGB); -#else - outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), - iobase+IRCC_SCE_CFGB); -#endif - (void) inb(iobase+IRCC_FIFO_THRESHOLD); - outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase+IRCC_FIFO_THRESHOLD); - + outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), + iobase + IRCC_SCE_CFGB); +#else + outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), + iobase + IRCC_SCE_CFGB); +#endif + (void) inb(iobase + IRCC_FIFO_THRESHOLD); + outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD); + register_bank(iobase, 4); - outb((inb(iobase+IRCC_CONTROL) & 0x30) | ctrl, iobase+IRCC_CONTROL); - + outb((inb(iobase + IRCC_CONTROL) & 0x30) | ctrl, iobase + IRCC_CONTROL); + register_bank(iobase, 0); - outb(fast, iobase+IRCC_LCR_A); + outb(fast, iobase + IRCC_LCR_A); smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); - + /* Power on device */ - outb(0x00, iobase+IRCC_MASTER); + outb(0x00, iobase + IRCC_MASTER); } /* @@ -662,12 +692,12 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd IRDA_ASSERT(dev != NULL, return -1;); - self = dev->priv; + self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return -1;); IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); - + switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ if (!capable(CAP_NET_ADMIN)) @@ -703,14 +733,14 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd default: ret = -EOPNOTSUPP; } - + return ret; } static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev) { - struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) dev->priv; - + struct smsc_ircc_cb *self = netdev_priv(dev); + return &self->stats; } @@ -724,11 +754,9 @@ static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev) static void smsc_ircc_timeout(struct net_device *dev) { - struct smsc_ircc_cb *self; + struct smsc_ircc_cb *self = netdev_priv(dev); unsigned long flags; - self = (struct smsc_ircc_cb *) dev->priv; - IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n", dev->name, self->io.speed); spin_lock_irqsave(&self->lock, flags); @@ -751,26 +779,23 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) { struct smsc_ircc_cb *self; unsigned long flags; - int iobase; s32 speed; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(dev != NULL, return 0;); - - self = (struct smsc_ircc_cb *) dev->priv; - IRDA_ASSERT(self != NULL, return 0;); - iobase = self->io.sir_base; + self = netdev_priv(dev); + IRDA_ASSERT(self != NULL, return 0;); netif_stop_queue(dev); - + /* Make sure test of self->io.speed & speed change are atomic */ spin_lock_irqsave(&self->lock, flags); /* Check if we need to change the speed */ speed = irda_get_next_speed(skb); - if ((speed != self->io.speed) && (speed != -1)) { + if (speed != self->io.speed && speed != -1) { /* Check for empty frame */ if (!skb->len) { /* @@ -787,27 +812,26 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; - } else { - self->new_speed = speed; } + self->new_speed = speed; } /* Init tx buffer */ self->tx_buff.data = self->tx_buff.head; /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ - self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize); - + self->stats.tx_bytes += self->tx_buff.len; /* Turn on transmit finished interrupt. Will fire immediately! */ - outb(UART_IER_THRI, iobase+UART_IER); + outb(UART_IER_THRI, self->io.sir_base + UART_IER); spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); - + return 0; } @@ -826,9 +850,9 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) self->io.speed = speed; - switch(speed) { + switch (speed) { default: - case 576000: + case 576000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_CRC; fast = 0; @@ -853,14 +877,14 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) Now in tranceiver! /* This causes an interrupt */ register_bank(fir_base, 0); - outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast, fir_base+IRCC_LCR_A); + outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A); #endif - + register_bank(fir_base, 1); - outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base+IRCC_SCE_CFGA); - + outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA); + register_bank(fir_base, 4); - outb((inb(fir_base+IRCC_CONTROL) & 0x30) | ctrl, fir_base+IRCC_CONTROL); + outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL); } /* @@ -885,31 +909,31 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) /* Reset everything */ /* Install FIR transmit handler */ - dev->hard_start_xmit = smsc_ircc_hard_xmit_fir; + dev->hard_start_xmit = smsc_ircc_hard_xmit_fir; /* Clear FIFO */ - outb(inb(fir_base+IRCC_LCR_A)|IRCC_LCR_A_FIFO_RESET, fir_base+IRCC_LCR_A); + outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A); /* Enable interrupt */ - /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER);*/ + /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/ register_bank(fir_base, 1); - /* Select the TX/RX interface */ + /* Select the TX/RX interface */ #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */ - outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), - fir_base+IRCC_SCE_CFGB); -#else - outb(((inb(fir_base+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), - fir_base+IRCC_SCE_CFGB); -#endif - (void) inb(fir_base+IRCC_FIFO_THRESHOLD); + outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), + fir_base + IRCC_SCE_CFGB); +#else + outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), + fir_base + IRCC_SCE_CFGB); +#endif + (void) inb(fir_base + IRCC_FIFO_THRESHOLD); /* Enable SCE interrupts */ - outb(0, fir_base+IRCC_MASTER); + outb(0, fir_base + IRCC_MASTER); register_bank(fir_base, 0); - outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base+IRCC_IER); - outb(IRCC_MASTER_INT_EN, fir_base+IRCC_MASTER); + outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER); + outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER); } /* @@ -923,13 +947,13 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) int fir_base; IRDA_DEBUG(1, "%s\n", __FUNCTION__); - + IRDA_ASSERT(self != NULL, return;); fir_base = self->io.fir_base; register_bank(fir_base, 0); - /*outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER);*/ - outb(inb(fir_base+IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base+IRCC_LCR_B); + /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/ + outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B); } @@ -941,18 +965,15 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) * This function *must* be called with spinlock held, because it may * be called from the irq handler. - Jean II */ -static void smsc_ircc_change_speed(void *priv, u32 speed) +static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed) { - struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv; struct net_device *dev; - int iobase; int last_speed_was_sir; - + IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; - iobase = self->io.fir_base; last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED; @@ -961,30 +982,30 @@ static void smsc_ircc_change_speed(void *priv, u32 speed) speed= 1152000; self->io.speed = speed; last_speed_was_sir = 0; - smsc_ircc_fir_start(self); + smsc_ircc_fir_start(self); #endif - - if(self->io.speed == 0) + + if (self->io.speed == 0) smsc_ircc_sir_start(self); #if 0 - if(!last_speed_was_sir) speed = self->io.speed; + if (!last_speed_was_sir) speed = self->io.speed; #endif - if(self->io.speed != speed) smsc_ircc_set_transceiver_for_speed(self, speed); + if (self->io.speed != speed) + smsc_ircc_set_transceiver_for_speed(self, speed); self->io.speed = speed; - - if(speed <= SMSC_IRCC2_MAX_SIR_SPEED) { - if(!last_speed_was_sir) { + + if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) { + if (!last_speed_was_sir) { smsc_ircc_fir_stop(self); smsc_ircc_sir_start(self); } - smsc_ircc_set_sir_speed(self, speed); - } - else { - if(last_speed_was_sir) { - #if SMSC_IRCC2_C_SIR_STOP + smsc_ircc_set_sir_speed(self, speed); + } else { + if (last_speed_was_sir) { + #if SMSC_IRCC2_C_SIR_STOP smsc_ircc_sir_stop(self); #endif smsc_ircc_fir_start(self); @@ -994,13 +1015,13 @@ static void smsc_ircc_change_speed(void *priv, u32 speed) #if 0 self->tx_buff.len = 10; self->tx_buff.data = self->tx_buff.head; - - smsc_ircc_dma_xmit(self, iobase, 4000); + + smsc_ircc_dma_xmit(self, 4000); #endif /* Be ready for incoming frames */ - smsc_ircc_dma_receive(self, iobase); + smsc_ircc_dma_receive(self); } - + netif_wake_queue(dev); } @@ -1010,10 +1031,9 @@ static void smsc_ircc_change_speed(void *priv, u32 speed) * Set speed of IrDA port to specified baudrate * */ -void smsc_ircc_set_sir_speed(void *priv, __u32 speed) +void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) { - struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv; - int iobase; + int iobase; int fcr; /* FIFO control reg */ int lcr; /* Line control reg */ int divisor; @@ -1022,38 +1042,36 @@ void smsc_ircc_set_sir_speed(void *priv, __u32 speed) IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; - + /* Update accounting for new speed */ self->io.speed = speed; /* Turn off interrupts */ - outb(0, iobase+UART_IER); + outb(0, iobase + UART_IER); + + divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed; - divisor = SMSC_IRCC2_MAX_SIR_SPEED/speed; - fcr = UART_FCR_ENABLE_FIFO; - /* + /* * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and * almost 1,7 ms at 19200 bps. At speeds above that we can just forget - * about this timeout since it will always be fast enough. + * about this timeout since it will always be fast enough. */ - if (self->io.speed < 38400) - fcr |= UART_FCR_TRIGGER_1; - else - fcr |= UART_FCR_TRIGGER_14; - + fcr |= self->io.speed < 38400 ? + UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; + /* IrDA ports use 8N1 */ lcr = UART_LCR_WLEN8; - - outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */ - outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */ - outb(divisor >> 8, iobase+UART_DLM); - outb(lcr, iobase+UART_LCR); /* Set 8N1 */ - outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ + + outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ + outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ + outb(divisor >> 8, iobase + UART_DLM); + outb(lcr, iobase + UART_LCR); /* Set 8N1 */ + outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ /* Turn on interrups */ - outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, iobase+UART_IER); + outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed); } @@ -1070,15 +1088,12 @@ static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) struct smsc_ircc_cb *self; unsigned long flags; s32 speed; - int iobase; int mtt; IRDA_ASSERT(dev != NULL, return 0;); - self = (struct smsc_ircc_cb *) dev->priv; + self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); - iobase = self->io.fir_base; - netif_stop_queue(dev); /* Make sure test of self->io.speed & speed change are atomic */ @@ -1086,30 +1101,31 @@ static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) /* Check if we need to change the speed after this frame */ speed = irda_get_next_speed(skb); - if ((speed != self->io.speed) && (speed != -1)) { + if (speed != self->io.speed && speed != -1) { /* Check for empty frame */ if (!skb->len) { /* Note : you should make sure that speed changes * are not going to corrupt any outgoing frame. * Look at nsc-ircc for the gory details - Jean II */ - smsc_ircc_change_speed(self, speed); + smsc_ircc_change_speed(self, speed); spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; - } else - self->new_speed = speed; + } + + self->new_speed = speed; } - + memcpy(self->tx_buff.head, skb->data, skb->len); self->tx_buff.len = skb->len; self->tx_buff.data = self->tx_buff.head; - - mtt = irda_get_mtt(skb); + + mtt = irda_get_mtt(skb); if (mtt) { int bofs; - /* + /* * Compute how many BOFs (STA or PA's) we need to waste the * min turn time given the speed of the link. */ @@ -1117,11 +1133,12 @@ static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) if (bofs > 4095) bofs = 4095; - smsc_ircc_dma_xmit(self, iobase, bofs); + smsc_ircc_dma_xmit(self, bofs); } else { /* Transmit frame */ - smsc_ircc_dma_xmit(self, iobase, 0); + smsc_ircc_dma_xmit(self, 0); } + spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); @@ -1129,43 +1146,44 @@ static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) } /* - * Function smsc_ircc_dma_xmit (self, iobase) + * Function smsc_ircc_dma_xmit (self, bofs) * * Transmit data using DMA * */ -static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int iobase, int bofs) +static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) { + int iobase = self->io.fir_base; u8 ctrl; IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 1 /* Disable Rx */ register_bank(iobase, 0); - outb(0x00, iobase+IRCC_LCR_B); + outb(0x00, iobase + IRCC_LCR_B); #endif register_bank(iobase, 1); - outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase+IRCC_SCE_CFGB); + outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, + iobase + IRCC_SCE_CFGB); self->io.direction = IO_XMIT; /* Set BOF additional count for generating the min turn time */ register_bank(iobase, 4); - outb(bofs & 0xff, iobase+IRCC_BOF_COUNT_LO); - ctrl = inb(iobase+IRCC_CONTROL) & 0xf0; - outb(ctrl | ((bofs >> 8) & 0x0f), iobase+IRCC_BOF_COUNT_HI); + outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO); + ctrl = inb(iobase + IRCC_CONTROL) & 0xf0; + outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI); /* Set max Tx frame size */ - outb(self->tx_buff.len >> 8, iobase+IRCC_TX_SIZE_HI); - outb(self->tx_buff.len & 0xff, iobase+IRCC_TX_SIZE_LO); + outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI); + outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO); /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/ - + /* Enable burst mode chip Tx DMA */ register_bank(iobase, 1); - outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | - IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB); + outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | + IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); /* Setup DMA controller (must be done after enabling chip DMA) */ irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len, @@ -1174,50 +1192,52 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int iobase, int bofs) /* Enable interrupt */ register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER); - outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER); - + outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); + outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); + /* Enable transmit */ - outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B); + outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B); } /* * Function smsc_ircc_dma_xmit_complete (self) * - * The transfer of a frame in finished. This function will only be called + * The transfer of a frame in finished. This function will only be called * by the interrupt handler * */ -static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self, int iobase) +static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) { + int iobase = self->io.fir_base; + IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 0 /* Disable Tx */ register_bank(iobase, 0); - outb(0x00, iobase+IRCC_LCR_B); + outb(0x00, iobase + IRCC_LCR_B); #endif - register_bank(self->io.fir_base, 1); - outb(inb(self->io.fir_base+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - self->io.fir_base+IRCC_SCE_CFGB); + register_bank(iobase, 1); + outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, + iobase + IRCC_SCE_CFGB); /* Check for underrun! */ register_bank(iobase, 0); - if (inb(iobase+IRCC_LSR) & IRCC_LSR_UNDERRUN) { + if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) { self->stats.tx_errors++; self->stats.tx_fifo_errors++; /* Reset error condition */ register_bank(iobase, 0); - outb(IRCC_MASTER_ERROR_RESET, iobase+IRCC_MASTER); - outb(0x00, iobase+IRCC_MASTER); + outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER); + outb(0x00, iobase + IRCC_MASTER); } else { self->stats.tx_packets++; - self->stats.tx_bytes += self->tx_buff.len; + self->stats.tx_bytes += self->tx_buff.len; } /* Check if it's time to change the speed */ if (self->new_speed) { - smsc_ircc_change_speed(self, self->new_speed); + smsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; } @@ -1231,31 +1251,32 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self, int iobase) * if it starts to receive a frame. * */ -static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self, int iobase) +static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self) { + int iobase = self->io.fir_base; #if 0 /* Turn off chip DMA */ register_bank(iobase, 1); - outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase+IRCC_SCE_CFGB); + outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, + iobase + IRCC_SCE_CFGB); #endif - + /* Disable Tx */ register_bank(iobase, 0); - outb(0x00, iobase+IRCC_LCR_B); + outb(0x00, iobase + IRCC_LCR_B); /* Turn off chip DMA */ register_bank(iobase, 1); - outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, - iobase+IRCC_SCE_CFGB); + outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, + iobase + IRCC_SCE_CFGB); self->io.direction = IO_RECV; self->rx_buff.data = self->rx_buff.head; /* Set max Rx frame size */ register_bank(iobase, 4); - outb((2050 >> 8) & 0x0f, iobase+IRCC_RX_SIZE_HI); - outb(2050 & 0xff, iobase+IRCC_RX_SIZE_LO); + outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI); + outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO); /* Setup DMA controller */ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, @@ -1263,83 +1284,83 @@ static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self, int iobase) /* Enable burst mode chip Rx DMA */ register_bank(iobase, 1); - outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | - IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB); + outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | + IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); /* Enable interrupt */ register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER); - outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER); - + outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); + outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); /* Enable receiver */ register_bank(iobase, 0); - outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, - iobase+IRCC_LCR_B); - + outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, + iobase + IRCC_LCR_B); + return 0; } /* - * Function smsc_ircc_dma_receive_complete(self, iobase) + * Function smsc_ircc_dma_receive_complete(self) * * Finished with receiving frames * */ -static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self, int iobase) +static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) { struct sk_buff *skb; int len, msgcnt, lsr; - + int iobase = self->io.fir_base; + register_bank(iobase, 0); - + IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 0 /* Disable Rx */ register_bank(iobase, 0); - outb(0x00, iobase+IRCC_LCR_B); + outb(0x00, iobase + IRCC_LCR_B); #endif register_bank(iobase, 0); - outb(inb(iobase+IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase+IRCC_LSAR); - lsr= inb(iobase+IRCC_LSR); - msgcnt = inb(iobase+IRCC_LCR_B) & 0x08; + outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR); + lsr= inb(iobase + IRCC_LSR); + msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__, get_dma_residue(self->io.dma)); len = self->rx_buff.truesize - get_dma_residue(self->io.dma); - /* Look for errors - */ - - if(lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) { + /* Look for errors */ + if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) { self->stats.rx_errors++; - if(lsr & IRCC_LSR_FRAME_ERROR) self->stats.rx_frame_errors++; - if(lsr & IRCC_LSR_CRC_ERROR) self->stats.rx_crc_errors++; - if(lsr & IRCC_LSR_SIZE_ERROR) self->stats.rx_length_errors++; - if(lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) self->stats.rx_length_errors++; + if (lsr & IRCC_LSR_FRAME_ERROR) + self->stats.rx_frame_errors++; + if (lsr & IRCC_LSR_CRC_ERROR) + self->stats.rx_crc_errors++; + if (lsr & IRCC_LSR_SIZE_ERROR) + self->stats.rx_length_errors++; + if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) + self->stats.rx_length_errors++; return; } + /* Remove CRC */ - if (self->io.speed < 4000000) - len -= 2; - else - len -= 4; + len -= self->io.speed < 4000000 ? 2 : 4; - if ((len < 2) || (len > 2050)) { + if (len < 2 || len > 2050) { IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len); return; } IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len); - skb = dev_alloc_skb(len+1); - if (!skb) { + skb = dev_alloc_skb(len + 1); + if (!skb) { IRDA_WARNING("%s(), memory squeeze, dropping frame.\n", __FUNCTION__); return; - } + } /* Make sure IP header gets aligned */ - skb_reserve(skb, 1); + skb_reserve(skb, 1); memcpy(skb_put(skb, len), self->rx_buff.data, len); self->stats.rx_packets++; @@ -1357,7 +1378,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self, int iobase * Receive one frame from the infrared port * */ -static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) +static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) { int boguscount = 0; int iobase; @@ -1366,20 +1387,20 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) iobase = self->io.sir_base; - /* - * Receive all characters in Rx FIFO, unwrap and unstuff them. - * async_unwrap_char will deliver all found frames + /* + * Receive all characters in Rx FIFO, unwrap and unstuff them. + * async_unwrap_char will deliver all found frames */ do { - async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, - inb(iobase+UART_RX)); + async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, + inb(iobase + UART_RX)); /* Make sure we don't stay here to long */ if (boguscount++ > 32) { IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__); break; } - } while (inb(iobase+UART_LSR) & UART_LSR_DR); + } while (inb(iobase + UART_LSR) & UART_LSR_DR); } @@ -1397,18 +1418,19 @@ static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *re irqreturn_t ret = IRQ_NONE; if (dev == NULL) { - printk(KERN_WARNING "%s: irq %d for unknown device.\n", + printk(KERN_WARNING "%s: irq %d for unknown device.\n", driver_name, irq); goto irq_ret; } - self = (struct smsc_ircc_cb *) dev->priv; + + self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return IRQ_NONE;); /* Serialise the interrupt handler in various CPUs, stop Tx path */ - spin_lock(&self->lock); + spin_lock(&self->lock); /* Check if we should use the SIR interrupt handler */ - if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) { + if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) { ret = smsc_ircc_interrupt_sir(dev); goto irq_ret_unlock; } @@ -1416,25 +1438,25 @@ static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *re iobase = self->io.fir_base; register_bank(iobase, 0); - iir = inb(iobase+IRCC_IIR); - if (iir == 0) + iir = inb(iobase + IRCC_IIR); + if (iir == 0) goto irq_ret_unlock; ret = IRQ_HANDLED; /* Disable interrupts */ - outb(0, iobase+IRCC_IER); - lcra = inb(iobase+IRCC_LCR_A); - lsr = inb(iobase+IRCC_LSR); - + outb(0, iobase + IRCC_IER); + lcra = inb(iobase + IRCC_LCR_A); + lsr = inb(iobase + IRCC_LSR); + IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir); if (iir & IRCC_IIR_EOM) { if (self->io.direction == IO_RECV) - smsc_ircc_dma_receive_complete(self, iobase); + smsc_ircc_dma_receive_complete(self); else - smsc_ircc_dma_xmit_complete(self, iobase); - - smsc_ircc_dma_receive(self, iobase); + smsc_ircc_dma_xmit_complete(self); + + smsc_ircc_dma_receive(self); } if (iir & IRCC_IIR_ACTIVE_FRAME) { @@ -1444,7 +1466,7 @@ static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *re /* Enable interrupts again */ register_bank(iobase, 0); - outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, iobase+IRCC_IER); + outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); irq_ret_unlock: spin_unlock(&self->lock); @@ -1459,7 +1481,7 @@ static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *re */ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) { - struct smsc_ircc_cb *self = dev->priv; + struct smsc_ircc_cb *self = netdev_priv(dev); int boguscount = 0; int iobase; int iir, lsr; @@ -1469,14 +1491,14 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) iobase = self->io.sir_base; - iir = inb(iobase+UART_IIR) & UART_IIR_ID; + iir = inb(iobase + UART_IIR) & UART_IIR_ID; if (iir == 0) return IRQ_NONE; while (iir) { /* Clear interrupt */ - lsr = inb(iobase+UART_LSR); + lsr = inb(iobase + UART_LSR); - IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", + IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, iir, lsr, iobase); switch (iir) { @@ -1496,13 +1518,13 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir); break; - } - + } + /* Make sure we don't stay here to long */ if (boguscount++ > 100) break; - iir = inb(iobase + UART_IIR) & UART_IIR_ID; + iir = inb(iobase + UART_IIR) & UART_IIR_ID; } /*spin_unlock(&self->lock);*/ return IRQ_HANDLED; @@ -1529,7 +1551,7 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self) get_dma_residue(self->io.dma)); status = (self->rx_buff.state != OUTSIDE_FRAME); - + return status; } #endif /* unused */ @@ -1544,19 +1566,16 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self) static int smsc_ircc_net_open(struct net_device *dev) { struct smsc_ircc_cb *self; - int iobase; char hwname[16]; unsigned long flags; IRDA_DEBUG(1, "%s\n", __FUNCTION__); - + IRDA_ASSERT(dev != NULL, return -1;); - self = (struct smsc_ircc_cb *) dev->priv; + self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); - - iobase = self->io.fir_base; - if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, + if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, (void *) dev)) { IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n", __FUNCTION__, self->io.irq); @@ -1568,14 +1587,14 @@ static int smsc_ircc_net_open(struct net_device *dev) self->io.speed = 0; smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); spin_unlock_irqrestore(&self->lock, flags); - + /* Give self a hardware name */ /* It would be cool to offer the chip revision here - Jean II */ sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base); - /* + /* * Open new IrLAP layer instance, now that everything should be - * initialized properly + * initialized properly */ self->irlap = irlap_open(dev, &self->qos, hwname); @@ -1590,7 +1609,7 @@ static int smsc_ircc_net_open(struct net_device *dev) __FUNCTION__, self->io.dma); return -EAGAIN; } - + netif_start_queue(dev); return 0; @@ -1605,73 +1624,53 @@ static int smsc_ircc_net_open(struct net_device *dev) static int smsc_ircc_net_close(struct net_device *dev) { struct smsc_ircc_cb *self; - int iobase; IRDA_DEBUG(1, "%s\n", __FUNCTION__); - + IRDA_ASSERT(dev != NULL, return -1;); - self = (struct smsc_ircc_cb *) dev->priv; + self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); - - iobase = self->io.fir_base; /* Stop device */ netif_stop_queue(dev); - + /* Stop and remove instance of IrLAP */ if (self->irlap) irlap_close(self->irlap); self->irlap = NULL; free_irq(self->io.irq, dev); - disable_dma(self->io.dma); - free_dma(self->io.dma); return 0; } - -static void smsc_ircc_suspend(struct smsc_ircc_cb *self) +static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) { - IRDA_MESSAGE("%s, Suspending\n", driver_name); + struct smsc_ircc_cb *self = dev_get_drvdata(dev); - if (self->io.suspended) - return; + IRDA_MESSAGE("%s, Suspending\n", driver_name); - smsc_ircc_net_close(self->netdev); + if (level == SUSPEND_DISABLE && !self->io.suspended) { + smsc_ircc_net_close(self->netdev); + self->io.suspended = 1; + } - self->io.suspended = 1; + return 0; } -static void smsc_ircc_wakeup(struct smsc_ircc_cb *self) +static int smsc_ircc_resume(struct device *dev, u32 level) { - if (!self->io.suspended) - return; + struct smsc_ircc_cb *self = dev_get_drvdata(dev); - /* The code was doing a "cli()" here, but this can't be right. - * If you need protection, do it in net_open with a spinlock - * or give a good reason. - Jean II */ + if (level == RESUME_ENABLE && self->io.suspended) { - smsc_ircc_net_open(self->netdev); - - IRDA_MESSAGE("%s, Waking up\n", driver_name); -} + smsc_ircc_net_open(self->netdev); + self->io.suspended = 0; -static int smsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data) -{ - struct smsc_ircc_cb *self = (struct smsc_ircc_cb*) dev->data; - if (self) { - switch (rqst) { - case PM_SUSPEND: - smsc_ircc_suspend(self); - break; - case PM_RESUME: - smsc_ircc_wakeup(self); - break; - } - } + IRDA_MESSAGE("%s, Waking up\n", driver_name); + } return 0; } @@ -1690,10 +1689,7 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) IRDA_ASSERT(self != NULL, return -1;); - iobase = self->io.fir_base; - - if (self->pmdev) - pm_unregister(self->pmdev); + platform_device_unregister(self->pldev); /* Remove netdevice */ unregister_netdev(self->netdev); @@ -1702,15 +1698,16 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) spin_lock_irqsave(&self->lock, flags); /* Stop interrupts */ + iobase = self->io.fir_base; register_bank(iobase, 0); - outb(0, iobase+IRCC_IER); - outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER); - outb(0x00, iobase+IRCC_MASTER); + outb(0, iobase + IRCC_IER); + outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); + outb(0x00, iobase + IRCC_MASTER); #if 0 /* Reset to SIR mode */ register_bank(iobase, 1); - outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase+IRCC_SCE_CFGA); - outb(IRCC_CFGB_IR, iobase+IRCC_SCE_CFGB); + outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase + IRCC_SCE_CFGA); + outb(IRCC_CFGB_IR, iobase + IRCC_SCE_CFGB); #endif spin_unlock_irqrestore(&self->lock, flags); @@ -1720,7 +1717,7 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) release_region(self->io.fir_base, self->io.fir_ext); - IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, + IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); @@ -1728,7 +1725,7 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) if (self->tx_buff.head) dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); - + if (self->rx_buff.head) dma_free_coherent(NULL, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); @@ -1744,10 +1741,12 @@ static void __exit smsc_ircc_cleanup(void) IRDA_DEBUG(1, "%s\n", __FUNCTION__); - for (i=0; i < 2; i++) { + for (i = 0; i < 2; i++) { if (dev_self[i]) smsc_ircc_close(dev_self[i]); } + + driver_unregister(&smsc_ircc_driver); } /* @@ -1763,34 +1762,34 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) IRDA_DEBUG(3, "%s\n", __FUNCTION__); - IRDA_ASSERT(self != NULL, return;); - dev= self->netdev; - IRDA_ASSERT(dev != NULL, return;); + IRDA_ASSERT(self != NULL, return;); + dev = self->netdev; + IRDA_ASSERT(dev != NULL, return;); dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir; fir_base = self->io.fir_base; sir_base = self->io.sir_base; /* Reset everything */ - outb(IRCC_MASTER_RESET, fir_base+IRCC_MASTER); + outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER); #if SMSC_IRCC2_C_SIR_STOP /*smsc_ircc_sir_stop(self);*/ #endif register_bank(fir_base, 1); - outb(((inb(fir_base+IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base+IRCC_SCE_CFGA); + outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA); /* Initialize UART */ - outb(UART_LCR_WLEN8, sir_base+UART_LCR); /* Reset DLAB */ - outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base+UART_MCR); - + outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */ + outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR); + /* Turn on interrups */ - outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base+UART_IER); + outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__); - outb(0x00, fir_base+IRCC_MASTER); + outb(0x00, fir_base + IRCC_MASTER); } #if SMSC_IRCC2_C_SIR_STOP @@ -1802,10 +1801,10 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) iobase = self->io.sir_base; /* Reset UART */ - outb(0, iobase+UART_MCR); - + outb(0, iobase + UART_MCR); + /* Turn off interrupts */ - outb(0, iobase+UART_IER); + outb(0, iobase + UART_IER); } #endif @@ -1831,16 +1830,16 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) /* Finished with frame? */ if (self->tx_buff.len > 0) { /* Write data left in transmit buffer */ - actual = smsc_ircc_sir_write(iobase, self->io.fifo_size, + actual = smsc_ircc_sir_write(iobase, self->io.fifo_size, self->tx_buff.data, self->tx_buff.len); self->tx_buff.data += actual; self->tx_buff.len -= actual; } else { - + /*if (self->tx_buff.len ==0) {*/ - - /* - * Now serial buffer is almost free & we can start + + /* + * Now serial buffer is almost free & we can start * transmission of another packet. But first we must check * if we need to change the speed of the hardware */ @@ -1856,21 +1855,19 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) } self->stats.tx_packets++; - if(self->io.speed <= 115200) { - /* - * Reset Rx FIFO to make sure that all reflected transmit data - * is discarded. This is needed for half duplex operation - */ - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR; - if (self->io.speed < 38400) - fcr |= UART_FCR_TRIGGER_1; - else - fcr |= UART_FCR_TRIGGER_14; + if (self->io.speed <= 115200) { + /* + * Reset Rx FIFO to make sure that all reflected transmit data + * is discarded. This is needed for half duplex operation + */ + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR; + fcr |= self->io.speed < 38400 ? + UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; - outb(fcr, iobase+UART_FCR); + outb(fcr, iobase + UART_FCR); - /* Turn on receive interrupts */ - outb(UART_IER_RDI, iobase+UART_IER); + /* Turn on receive interrupts */ + outb(UART_IER_RDI, iobase + UART_IER); } } } @@ -1884,17 +1881,17 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) { int actual = 0; - + /* Tx FIFO should be empty! */ - if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { + if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__); return 0; } - + /* Fill FIFO with current frame */ - while ((fifo_size-- > 0) && (actual < len)) { + while (fifo_size-- > 0 && actual < len) { /* Transmit next byte */ - outb(buf[actual], iobase+UART_TX); + outb(buf[actual], iobase + UART_TX); actual++; } return actual; @@ -1921,20 +1918,21 @@ static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self) static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self) { unsigned int i; - + IRDA_ASSERT(self != NULL, return;); - - for(i=0; smsc_transceivers[i].name!=NULL; i++) - if((*smsc_transceivers[i].probe)(self->io.fir_base)) { + + for (i = 0; smsc_transceivers[i].name != NULL; i++) + if (smsc_transceivers[i].probe(self->io.fir_base)) { IRDA_MESSAGE(" %s transceiver found\n", smsc_transceivers[i].name); - self->transceiver= i+1; + self->transceiver= i + 1; return; } + IRDA_MESSAGE("No transceiver found. Defaulting to %s\n", smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name); - - self->transceiver= SMSC_IRCC2_C_DEFAULT_TRANSCEIVER; + + self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER; } @@ -1947,9 +1945,10 @@ static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self) static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed) { unsigned int trx; - + trx = self->transceiver; - if(trx>0) (*smsc_transceivers[trx-1].set_for_speed)(self->io.fir_base, speed); + if (trx > 0) + smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed); } /* @@ -1977,16 +1976,14 @@ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 s static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) { - int iobase; + int iobase = self->io.sir_base; int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US; - - iobase = self->io.sir_base; - + /* Calibrated busy loop */ - while((count-- > 0) && !(inb(iobase+UART_LSR) & UART_LSR_TEMT)) + while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT)) udelay(1); - if(count == 0) + if (count == 0) IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__); } @@ -1998,40 +1995,42 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) static int __init smsc_ircc_look_for_chips(void) { - smsc_chip_address_t *address; - char *type; + struct smsc_chip_address *address; + char *type; unsigned int cfg_base, found; - + found = 0; address = possible_addresses; - - while(address->cfg_base){ + + while (address->cfg_base) { cfg_base = address->cfg_base; - + /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/ - - if( address->type & SMSCSIO_TYPE_FDC){ + + if (address->type & SMSCSIO_TYPE_FDC) { type = "FDC"; - if((address->type) & SMSCSIO_TYPE_FLAT) { - if(!smsc_superio_flat(fdc_chips_flat,cfg_base, type)) found++; - } - if((address->type) & SMSCSIO_TYPE_PAGED) { - if(!smsc_superio_paged(fdc_chips_paged,cfg_base, type)) found++; - } + if (address->type & SMSCSIO_TYPE_FLAT) + if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type)) + found++; + + if (address->type & SMSCSIO_TYPE_PAGED) + if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type)) + found++; } - if( address->type & SMSCSIO_TYPE_LPC){ + if (address->type & SMSCSIO_TYPE_LPC) { type = "LPC"; - if((address->type) & SMSCSIO_TYPE_FLAT) { - if(!smsc_superio_flat(lpc_chips_flat,cfg_base,type)) found++; - } - if((address->type) & SMSCSIO_TYPE_PAGED) { - if(!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC")) found++; - } + if (address->type & SMSCSIO_TYPE_FLAT) + if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type)) + found++; + + if (address->type & SMSCSIO_TYPE_PAGED) + if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type)) + found++; } address++; } return found; -} +} /* * Function smsc_superio_flat (chip, base, type) @@ -2039,7 +2038,7 @@ static int __init smsc_ircc_look_for_chips(void) * Try to get configuration of a smc SuperIO chip with flat register model * */ -static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfgbase, char *type) +static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type) { unsigned short firbase, sirbase; u8 mode, dma, irq; @@ -2047,39 +2046,37 @@ static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfg IRDA_DEBUG(1, "%s\n", __FUNCTION__); - if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type)==NULL) + if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) return ret; outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); - mode = inb(cfgbase+1); - + mode = inb(cfgbase + 1); + /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/ - - if(!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) + + if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__); outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); - sirbase = inb(cfgbase+1) << 2; + sirbase = inb(cfgbase + 1) << 2; - /* FIR iobase */ + /* FIR iobase */ outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase); - firbase = inb(cfgbase+1) << 3; + firbase = inb(cfgbase + 1) << 3; /* DMA */ outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase); - dma = inb(cfgbase+1) & SMSCSIOFLAT_FIRDMASELECT_MASK; - + dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK; + /* IRQ */ outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); - irq = inb(cfgbase+1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; + irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode); - if (firbase) { - if (smsc_ircc_open(firbase, sirbase, dma, irq) == 0) - ret=0; - } - + if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) + ret = 0; + /* Exit configuration */ outb(SMSCSIO_CFGEXITKEY, cfgbase); @@ -2092,26 +2089,26 @@ static int __init smsc_superio_flat(const smsc_chip_t *chips, unsigned short cfg * Try to get configuration of a smc SuperIO chip with paged register model * */ -static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cfg_base, char *type) +static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type) { unsigned short fir_io, sir_io; int ret = -ENODEV; - + IRDA_DEBUG(1, "%s\n", __FUNCTION__); - if (smsc_ircc_probe(cfg_base,0x20,chips,type)==NULL) + if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) return ret; - + /* Select logical device (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base + 1); - + /* SIR iobase */ outb(0x60, cfg_base); - sir_io = inb(cfg_base + 1) << 8; + sir_io = inb(cfg_base + 1) << 8; outb(0x61, cfg_base); sir_io |= inb(cfg_base + 1); - + /* Read FIR base */ outb(0x62, cfg_base); fir_io = inb(cfg_base + 1) << 8; @@ -2119,11 +2116,9 @@ static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cf fir_io |= inb(cfg_base + 1); outb(0x2b, cfg_base); /* ??? */ - if (fir_io) { - if (smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0) - ret=0; - } - + if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0) + ret = 0; + /* Exit configuration */ outb(SMSCSIO_CFGEXITKEY, cfg_base); @@ -2131,21 +2126,17 @@ static int __init smsc_superio_paged(const smsc_chip_t *chips, unsigned short cf } -static int __init smsc_access(unsigned short cfg_base,unsigned char reg) +static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { IRDA_DEBUG(1, "%s\n", __FUNCTION__); outb(reg, cfg_base); - - if (inb(cfg_base)!=reg) - return -1; - - return 0; + return inb(cfg_base) != reg ? -1 : 0; } -static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg,const smsc_chip_t *chip,char *type) +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) { - u8 devid,xdevid,rev; + u8 devid, xdevid, rev; IRDA_DEBUG(1, "%s\n", __FUNCTION__); @@ -2158,7 +2149,7 @@ static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg outb(reg, cfg_base); - xdevid=inb(cfg_base+1); + xdevid = inb(cfg_base + 1); /* Enter configuration */ @@ -2168,51 +2159,49 @@ static const smsc_chip_t * __init smsc_ircc_probe(unsigned short cfg_base,u8 reg if (smsc_access(cfg_base,0x55)) /* send second key and check */ return NULL; #endif - + /* probe device ID */ - if (smsc_access(cfg_base,reg)) + if (smsc_access(cfg_base, reg)) return NULL; - devid=inb(cfg_base+1); - - if (devid==0) /* typical value for unused port */ - return NULL; + devid = inb(cfg_base + 1); - if (devid==0xff) /* typical value for unused port */ + if (devid == 0 || devid == 0xff) /* typical values for unused port */ return NULL; /* probe revision ID */ - if (smsc_access(cfg_base,reg+1)) + if (smsc_access(cfg_base, reg + 1)) return NULL; - rev=inb(cfg_base+1); + rev = inb(cfg_base + 1); - if (rev>=128) /* i think this will make no sense */ + if (rev >= 128) /* i think this will make no sense */ return NULL; - if (devid==xdevid) /* protection against false positives */ + if (devid == xdevid) /* protection against false positives */ return NULL; /* Check for expected device ID; are there others? */ - while(chip->devid!=devid) { + while (chip->devid != devid) { chip++; - if (chip->name==NULL) + if (chip->name == NULL) return NULL; } - IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",devid,rev,cfg_base,type,chip->name); + IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n", + devid, rev, cfg_base, type, chip->name); - if (chip->rev>rev){ - IRDA_MESSAGE("Revision higher than expected\n"); + if (chip->rev > rev) { + IRDA_MESSAGE("Revision higher than expected\n"); return NULL; } - - if (chip->flags&NoIRDA) + + if (chip->flags & NoIRDA) IRDA_MESSAGE("chipset does not support IRDA\n"); return chip; @@ -2226,8 +2215,8 @@ static int __init smsc_superio_fdc(unsigned short cfg_base) IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", __FUNCTION__, cfg_base); } else { - if (!smsc_superio_flat(fdc_chips_flat,cfg_base,"FDC") - ||!smsc_superio_paged(fdc_chips_paged,cfg_base,"FDC")) + if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || + !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) ret = 0; release_region(cfg_base, 2); @@ -2244,9 +2233,10 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", __FUNCTION__, cfg_base); } else { - if (!smsc_superio_flat(lpc_chips_flat,cfg_base,"LPC") - ||!smsc_superio_paged(lpc_chips_paged,cfg_base,"LPC")) + if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || + !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) ret = 0; + release_region(cfg_base, 2); } return ret; @@ -2269,18 +2259,23 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) { unsigned long jiffies_now, jiffies_timeout; - u8 val; - - jiffies_now= jiffies; - jiffies_timeout= jiffies+SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES; - + u8 val; + + jiffies_now = jiffies; + jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES; + /* ATC */ register_bank(fir_base, 4); - outb((inb(fir_base+IRCC_ATC) & IRCC_ATC_MASK) |IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, fir_base+IRCC_ATC); - while((val=(inb(fir_base+IRCC_ATC) & IRCC_ATC_nPROGREADY)) && !time_after(jiffies, jiffies_timeout)); - if(val) + outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, + fir_base + IRCC_ATC); + + while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) && + !time_after(jiffies, jiffies_timeout)) + /* empty */; + + if (val) IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__, - inb(fir_base+IRCC_ATC)); + inb(fir_base + IRCC_ATC)); } /* @@ -2298,34 +2293,32 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base) /* * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed) * - * Set transceiver + * Set transceiver * */ static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed) { - u8 fast_mode; - - switch(speed) - { - default: - case 576000 : - fast_mode = 0; + u8 fast_mode; + + switch (speed) { + default: + case 576000 : + fast_mode = 0; break; - case 1152000 : - case 4000000 : + case 1152000 : + case 4000000 : fast_mode = IRCC_LCR_A_FAST; break; - } register_bank(fir_base, 0); - outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A); + outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); } /* * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base) * - * Probe transceiver + * Probe transceiver * */ @@ -2337,35 +2330,34 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base) /* * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed) * - * Set transceiver + * Set transceiver * */ static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed) { - u8 fast_mode; - - switch(speed) - { - default: - case 576000 : - fast_mode = 0; + u8 fast_mode; + + switch (speed) { + default: + case 576000 : + fast_mode = 0; break; - case 1152000 : - case 4000000 : + case 1152000 : + case 4000000 : fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA; break; - + } /* This causes an interrupt */ register_bank(fir_base, 0); - outb((inb(fir_base+IRCC_LCR_A) & 0xbf) | fast_mode, fir_base+IRCC_LCR_A); + outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); } /* * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base) * - * Probe transceiver + * Probe transceiver * */ @@ -2377,20 +2369,3 @@ static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base) module_init(smsc_ircc_init); module_exit(smsc_ircc_cleanup); - -MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>"); -MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); -MODULE_LICENSE("GPL"); - -module_param(ircc_dma, int, 0); -MODULE_PARM_DESC(ircc_dma, "DMA channel"); -module_param(ircc_irq, int, 0); -MODULE_PARM_DESC(ircc_irq, "IRQ line"); -module_param(ircc_fir, int, 0); -MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); -module_param(ircc_sir, int, 0); -MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); -module_param(ircc_cfg, int, 0); -MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); -module_param(ircc_transceiver, int, 0); -MODULE_PARM_DESC(ircc_transceiver, "Transceiver type"); diff --git a/drivers/net/irda/smsc-ircc2.h b/drivers/net/irda/smsc-ircc2.h index 458611cc0d4..0c36286d87f 100644 --- a/drivers/net/irda/smsc-ircc2.h +++ b/drivers/net/irda/smsc-ircc2.h @@ -1,5 +1,5 @@ /********************************************************************* - * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $ + * $Id: smsc-ircc2.h,v 1.12.2.1 2002/10/27 10:52:37 dip Exp $ * * Description: Definitions for the SMC IrCC chipset * Status: Experimental. @@ -9,25 +9,25 @@ * All Rights Reserved. * * Based on smc-ircc.h: - * + * * Copyright (c) 1999-2000, Dag Brattli <dagb@cs.uit.no> * Copyright (c) 1998-1999, Thomas Davis (tadavis@jps.net> * All Rights Reserved * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ @@ -112,10 +112,10 @@ #define IRCC_CFGA_COM 0x00 #define IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK 0x87 -#define IRCC_CFGA_IRDA_SIR_A 0x08 -#define IRCC_CFGA_ASK_SIR 0x10 -#define IRCC_CFGA_IRDA_SIR_B 0x18 -#define IRCC_CFGA_IRDA_HDLC 0x20 +#define IRCC_CFGA_IRDA_SIR_A 0x08 +#define IRCC_CFGA_ASK_SIR 0x10 +#define IRCC_CFGA_IRDA_SIR_B 0x18 +#define IRCC_CFGA_IRDA_HDLC 0x20 #define IRCC_CFGA_IRDA_4PPM 0x28 #define IRCC_CFGA_CONSUMER 0x30 #define IRCC_CFGA_RAW_IR 0x38 @@ -130,7 +130,7 @@ #define IRCC_CFGB_LPBCK_TX_CRC 0x10 #define IRCC_CFGB_NOWAIT 0x08 #define IRCC_CFGB_STRING_MOVE 0x04 -#define IRCC_CFGB_DMA_BURST 0x02 +#define IRCC_CFGB_DMA_BURST 0x02 #define IRCC_CFGB_DMA_ENABLE 0x01 #define IRCC_CFGB_MUX_COM 0x00 @@ -141,11 +141,11 @@ /* Register block 3 - Identification Registers! */ #define IRCC_ID_HIGH 0x00 /* 0x10 */ #define IRCC_ID_LOW 0x01 /* 0xB8 */ -#define IRCC_CHIP_ID 0x02 /* 0xF1 */ +#define IRCC_CHIP_ID 0x02 /* 0xF1 */ #define IRCC_VERSION 0x03 /* 0x01 */ #define IRCC_INTERFACE 0x04 /* low 4 = DMA, high 4 = IRQ */ -#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */ -#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */ +#define IRCC_INTERFACE_DMA_MASK 0x0F /* low 4 = DMA, high 4 = IRQ */ +#define IRCC_INTERFACE_IRQ_MASK 0xF0 /* low 4 = DMA, high 4 = IRQ */ /* Register block 4 - IrDA */ #define IRCC_CONTROL 0x00 @@ -163,10 +163,10 @@ /* Register block 5 - IrDA */ #define IRCC_ATC 0x00 -#define IRCC_ATC_nPROGREADY 0x80 -#define IRCC_ATC_SPEED 0x40 -#define IRCC_ATC_ENABLE 0x20 -#define IRCC_ATC_MASK 0xE0 +#define IRCC_ATC_nPROGREADY 0x80 +#define IRCC_ATC_SPEED 0x40 +#define IRCC_ATC_ENABLE 0x20 +#define IRCC_ATC_MASK 0xE0 #define IRCC_IRHALFDUPLEX_TIMEOUT 0x01 @@ -178,8 +178,8 @@ */ #define SMSC_IRCC2_MAX_SIR_SPEED 115200 -#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8 -#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8 +#define SMSC_IRCC2_FIR_CHIP_IO_EXTENT 8 +#define SMSC_IRCC2_SIR_CHIP_IO_EXTENT 8 #define SMSC_IRCC2_FIFO_SIZE 16 #define SMSC_IRCC2_FIFO_THRESHOLD 64 /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index 006e4f57560..6d9de626c96 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -1749,11 +1749,6 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) struct net_device *ndev = pci_get_drvdata(pdev); vlsi_irda_dev_t *idev; - if (state < 1 || state > 3 ) { - IRDA_ERROR("%s - %s: invalid pm state request: %u\n", - __FUNCTION__, PCIDEV_NAME(pdev), state); - return 0; - } if (!ndev) { IRDA_ERROR("%s - %s: no netdevice \n", __FUNCTION__, PCIDEV_NAME(pdev)); @@ -1762,12 +1757,12 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) idev = ndev->priv; down(&idev->sem); if (pdev->current_state != 0) { /* already suspended */ - if (state > pdev->current_state) { /* simply go deeper */ - pci_set_power_state(pdev,state); - pdev->current_state = state; + if (state.event > pdev->current_state) { /* simply go deeper */ + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pdev->current_state = state.event; } else - IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state); + IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event); up(&idev->sem); return 0; } @@ -1781,8 +1776,8 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) idev->new_baud = idev->baud; } - pci_set_power_state(pdev,state); - pdev->current_state = state; + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pdev->current_state = state.event; idev->resume_ok = 1; up(&idev->sem); return 0; @@ -1807,8 +1802,8 @@ static int vlsi_irda_resume(struct pci_dev *pdev) return 0; } - pci_set_power_state(pdev, 0); - pdev->current_state = 0; + pci_set_power_state(pdev, PCI_D0); + pdev->current_state = PM_EVENT_ON; if (!idev->resume_ok) { /* should be obsolete now - but used to happen due to: diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 183ba97785b..3d56cf5a4e2 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -4,6 +4,7 @@ * Copyright (C) 2001 Kyle A. Lucke (klucke@us.ibm.com), IBM Corp. * Substantially cleaned up by: * Copyright (C) 2003 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * Copyright (C) 2004-2005 Michael Ellerman, IBM Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -79,12 +80,55 @@ #include <asm/iommu.h> #include <asm/vio.h> -#include "iseries_veth.h" +#undef DEBUG MODULE_AUTHOR("Kyle Lucke <klucke@us.ibm.com>"); MODULE_DESCRIPTION("iSeries Virtual ethernet driver"); MODULE_LICENSE("GPL"); +#define VETH_EVENT_CAP (0) +#define VETH_EVENT_FRAMES (1) +#define VETH_EVENT_MONITOR (2) +#define VETH_EVENT_FRAMES_ACK (3) + +#define VETH_MAX_ACKS_PER_MSG (20) +#define VETH_MAX_FRAMES_PER_MSG (6) + +struct veth_frames_data { + u32 addr[VETH_MAX_FRAMES_PER_MSG]; + u16 len[VETH_MAX_FRAMES_PER_MSG]; + u32 eofmask; +}; +#define VETH_EOF_SHIFT (32-VETH_MAX_FRAMES_PER_MSG) + +struct veth_frames_ack_data { + u16 token[VETH_MAX_ACKS_PER_MSG]; +}; + +struct veth_cap_data { + u8 caps_version; + u8 rsvd1; + u16 num_buffers; + u16 ack_threshold; + u16 rsvd2; + u32 ack_timeout; + u32 rsvd3; + u64 rsvd4[3]; +}; + +struct veth_lpevent { + struct HvLpEvent base_event; + union { + struct veth_cap_data caps_data; + struct veth_frames_data frames_data; + struct veth_frames_ack_data frames_ack_data; + } u; + +}; + +#define DRV_NAME "iseries_veth" +#define DRV_VERSION "2.0" + #define VETH_NUMBUFFERS (120) #define VETH_ACKTIMEOUT (1000000) /* microseconds */ #define VETH_MAX_MCAST (12) @@ -113,9 +157,9 @@ MODULE_LICENSE("GPL"); struct veth_msg { struct veth_msg *next; - struct VethFramesData data; + struct veth_frames_data data; int token; - unsigned long in_use; + int in_use; struct sk_buff *skb; struct device *dev; }; @@ -125,23 +169,28 @@ struct veth_lpar_connection { struct work_struct statemachine_wq; struct veth_msg *msgs; int num_events; - struct VethCapData local_caps; + struct veth_cap_data local_caps; + struct kobject kobject; struct timer_list ack_timer; + struct timer_list reset_timer; + unsigned int reset_timeout; + unsigned long last_contact; + int outstanding_tx; + spinlock_t lock; unsigned long state; HvLpInstanceId src_inst; HvLpInstanceId dst_inst; - struct VethLpEvent cap_event, cap_ack_event; + struct veth_lpevent cap_event, cap_ack_event; u16 pending_acks[VETH_MAX_ACKS_PER_MSG]; u32 num_pending_acks; int num_ack_events; - struct VethCapData remote_caps; + struct veth_cap_data remote_caps; u32 ack_timeout; - spinlock_t msg_stack_lock; struct veth_msg *msg_stack_head; }; @@ -151,15 +200,17 @@ struct veth_port { u64 mac_addr; HvLpIndexMap lpar_map; - spinlock_t pending_gate; - struct sk_buff *pending_skb; - HvLpIndexMap pending_lpmask; + /* queue_lock protects the stopped_map and dev's queue. */ + spinlock_t queue_lock; + HvLpIndexMap stopped_map; + /* mcast_gate protects promiscuous, num_mcast & mcast_addr. */ rwlock_t mcast_gate; int promiscuous; - int all_mcast; int num_mcast; u64 mcast_addr[VETH_MAX_MCAST]; + + struct kobject kobject; }; static HvLpIndex this_lp; @@ -168,44 +219,56 @@ static struct net_device *veth_dev[HVMAXARCHITECTEDVIRTUALLANS]; /* = 0 */ static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev); static void veth_recycle_msg(struct veth_lpar_connection *, struct veth_msg *); -static void veth_flush_pending(struct veth_lpar_connection *cnx); -static void veth_receive(struct veth_lpar_connection *, struct VethLpEvent *); -static void veth_timed_ack(unsigned long connectionPtr); +static void veth_wake_queues(struct veth_lpar_connection *cnx); +static void veth_stop_queues(struct veth_lpar_connection *cnx); +static void veth_receive(struct veth_lpar_connection *, struct veth_lpevent *); +static void veth_release_connection(struct kobject *kobject); +static void veth_timed_ack(unsigned long ptr); +static void veth_timed_reset(unsigned long ptr); /* * Utility functions */ -#define veth_printk(prio, fmt, args...) \ - printk(prio "%s: " fmt, __FILE__, ## args) +#define veth_info(fmt, args...) \ + printk(KERN_INFO DRV_NAME ": " fmt, ## args) #define veth_error(fmt, args...) \ - printk(KERN_ERR "(%s:%3.3d) ERROR: " fmt, __FILE__, __LINE__ , ## args) + printk(KERN_ERR DRV_NAME ": Error: " fmt, ## args) + +#ifdef DEBUG +#define veth_debug(fmt, args...) \ + printk(KERN_DEBUG DRV_NAME ": " fmt, ## args) +#else +#define veth_debug(fmt, args...) do {} while (0) +#endif +/* You must hold the connection's lock when you call this function. */ static inline void veth_stack_push(struct veth_lpar_connection *cnx, struct veth_msg *msg) { - unsigned long flags; - - spin_lock_irqsave(&cnx->msg_stack_lock, flags); msg->next = cnx->msg_stack_head; cnx->msg_stack_head = msg; - spin_unlock_irqrestore(&cnx->msg_stack_lock, flags); } +/* You must hold the connection's lock when you call this function. */ static inline struct veth_msg *veth_stack_pop(struct veth_lpar_connection *cnx) { - unsigned long flags; struct veth_msg *msg; - spin_lock_irqsave(&cnx->msg_stack_lock, flags); msg = cnx->msg_stack_head; if (msg) cnx->msg_stack_head = cnx->msg_stack_head->next; - spin_unlock_irqrestore(&cnx->msg_stack_lock, flags); + return msg; } +/* You must hold the connection's lock when you call this function. */ +static inline int veth_stack_is_empty(struct veth_lpar_connection *cnx) +{ + return cnx->msg_stack_head == NULL; +} + static inline HvLpEvent_Rc veth_signalevent(struct veth_lpar_connection *cnx, u16 subtype, HvLpEvent_AckInd ackind, HvLpEvent_AckType acktype, @@ -249,7 +312,7 @@ static int veth_allocate_events(HvLpIndex rlp, int number) struct veth_allocation vc = { COMPLETION_INITIALIZER(vc.c), 0 }; mf_allocate_lp_events(rlp, HvLpEvent_Type_VirtualLan, - sizeof(struct VethLpEvent), number, + sizeof(struct veth_lpevent), number, &veth_complete_allocation, &vc); wait_for_completion(&vc.c); @@ -257,6 +320,137 @@ static int veth_allocate_events(HvLpIndex rlp, int number) } /* + * sysfs support + */ + +struct veth_cnx_attribute { + struct attribute attr; + ssize_t (*show)(struct veth_lpar_connection *, char *buf); + ssize_t (*store)(struct veth_lpar_connection *, const char *buf); +}; + +static ssize_t veth_cnx_attribute_show(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct veth_cnx_attribute *cnx_attr; + struct veth_lpar_connection *cnx; + + cnx_attr = container_of(attr, struct veth_cnx_attribute, attr); + cnx = container_of(kobj, struct veth_lpar_connection, kobject); + + if (!cnx_attr->show) + return -EIO; + + return cnx_attr->show(cnx, buf); +} + +#define CUSTOM_CNX_ATTR(_name, _format, _expression) \ +static ssize_t _name##_show(struct veth_lpar_connection *cnx, char *buf)\ +{ \ + return sprintf(buf, _format, _expression); \ +} \ +struct veth_cnx_attribute veth_cnx_attr_##_name = __ATTR_RO(_name) + +#define SIMPLE_CNX_ATTR(_name) \ + CUSTOM_CNX_ATTR(_name, "%lu\n", (unsigned long)cnx->_name) + +SIMPLE_CNX_ATTR(outstanding_tx); +SIMPLE_CNX_ATTR(remote_lp); +SIMPLE_CNX_ATTR(num_events); +SIMPLE_CNX_ATTR(src_inst); +SIMPLE_CNX_ATTR(dst_inst); +SIMPLE_CNX_ATTR(num_pending_acks); +SIMPLE_CNX_ATTR(num_ack_events); +CUSTOM_CNX_ATTR(ack_timeout, "%d\n", jiffies_to_msecs(cnx->ack_timeout)); +CUSTOM_CNX_ATTR(reset_timeout, "%d\n", jiffies_to_msecs(cnx->reset_timeout)); +CUSTOM_CNX_ATTR(state, "0x%.4lX\n", cnx->state); +CUSTOM_CNX_ATTR(last_contact, "%d\n", cnx->last_contact ? + jiffies_to_msecs(jiffies - cnx->last_contact) : 0); + +#define GET_CNX_ATTR(_name) (&veth_cnx_attr_##_name.attr) + +static struct attribute *veth_cnx_default_attrs[] = { + GET_CNX_ATTR(outstanding_tx), + GET_CNX_ATTR(remote_lp), + GET_CNX_ATTR(num_events), + GET_CNX_ATTR(reset_timeout), + GET_CNX_ATTR(last_contact), + GET_CNX_ATTR(state), + GET_CNX_ATTR(src_inst), + GET_CNX_ATTR(dst_inst), + GET_CNX_ATTR(num_pending_acks), + GET_CNX_ATTR(num_ack_events), + GET_CNX_ATTR(ack_timeout), + NULL +}; + +static struct sysfs_ops veth_cnx_sysfs_ops = { + .show = veth_cnx_attribute_show +}; + +static struct kobj_type veth_lpar_connection_ktype = { + .release = veth_release_connection, + .sysfs_ops = &veth_cnx_sysfs_ops, + .default_attrs = veth_cnx_default_attrs +}; + +struct veth_port_attribute { + struct attribute attr; + ssize_t (*show)(struct veth_port *, char *buf); + ssize_t (*store)(struct veth_port *, const char *buf); +}; + +static ssize_t veth_port_attribute_show(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct veth_port_attribute *port_attr; + struct veth_port *port; + + port_attr = container_of(attr, struct veth_port_attribute, attr); + port = container_of(kobj, struct veth_port, kobject); + + if (!port_attr->show) + return -EIO; + + return port_attr->show(port, buf); +} + +#define CUSTOM_PORT_ATTR(_name, _format, _expression) \ +static ssize_t _name##_show(struct veth_port *port, char *buf) \ +{ \ + return sprintf(buf, _format, _expression); \ +} \ +struct veth_port_attribute veth_port_attr_##_name = __ATTR_RO(_name) + +#define SIMPLE_PORT_ATTR(_name) \ + CUSTOM_PORT_ATTR(_name, "%lu\n", (unsigned long)port->_name) + +SIMPLE_PORT_ATTR(promiscuous); +SIMPLE_PORT_ATTR(num_mcast); +CUSTOM_PORT_ATTR(lpar_map, "0x%X\n", port->lpar_map); +CUSTOM_PORT_ATTR(stopped_map, "0x%X\n", port->stopped_map); +CUSTOM_PORT_ATTR(mac_addr, "0x%lX\n", port->mac_addr); + +#define GET_PORT_ATTR(_name) (&veth_port_attr_##_name.attr) +static struct attribute *veth_port_default_attrs[] = { + GET_PORT_ATTR(mac_addr), + GET_PORT_ATTR(lpar_map), + GET_PORT_ATTR(stopped_map), + GET_PORT_ATTR(promiscuous), + GET_PORT_ATTR(num_mcast), + NULL +}; + +static struct sysfs_ops veth_port_sysfs_ops = { + .show = veth_port_attribute_show +}; + +static struct kobj_type veth_port_ktype = { + .sysfs_ops = &veth_port_sysfs_ops, + .default_attrs = veth_port_default_attrs +}; + +/* * LPAR connection code */ @@ -266,7 +460,7 @@ static inline void veth_kick_statemachine(struct veth_lpar_connection *cnx) } static void veth_take_cap(struct veth_lpar_connection *cnx, - struct VethLpEvent *event) + struct veth_lpevent *event) { unsigned long flags; @@ -278,7 +472,7 @@ static void veth_take_cap(struct veth_lpar_connection *cnx, HvLpEvent_Type_VirtualLan); if (cnx->state & VETH_STATE_GOTCAPS) { - veth_error("Received a second capabilities from lpar %d\n", + veth_error("Received a second capabilities from LPAR %d.\n", cnx->remote_lp); event->base_event.xRc = HvLpEvent_Rc_BufferNotAvailable; HvCallEvent_ackLpEvent((struct HvLpEvent *) event); @@ -291,13 +485,13 @@ static void veth_take_cap(struct veth_lpar_connection *cnx, } static void veth_take_cap_ack(struct veth_lpar_connection *cnx, - struct VethLpEvent *event) + struct veth_lpevent *event) { unsigned long flags; spin_lock_irqsave(&cnx->lock, flags); if (cnx->state & VETH_STATE_GOTCAPACK) { - veth_error("Received a second capabilities ack from lpar %d\n", + veth_error("Received a second capabilities ack from LPAR %d.\n", cnx->remote_lp); } else { memcpy(&cnx->cap_ack_event, event, @@ -309,19 +503,24 @@ static void veth_take_cap_ack(struct veth_lpar_connection *cnx, } static void veth_take_monitor_ack(struct veth_lpar_connection *cnx, - struct VethLpEvent *event) + struct veth_lpevent *event) { unsigned long flags; spin_lock_irqsave(&cnx->lock, flags); - veth_printk(KERN_DEBUG, "Monitor ack returned for lpar %d\n", - cnx->remote_lp); - cnx->state |= VETH_STATE_RESET; - veth_kick_statemachine(cnx); + veth_debug("cnx %d: lost connection.\n", cnx->remote_lp); + + /* Avoid kicking the statemachine once we're shutdown. + * It's unnecessary and it could break veth_stop_connection(). */ + + if (! (cnx->state & VETH_STATE_SHUTDOWN)) { + cnx->state |= VETH_STATE_RESET; + veth_kick_statemachine(cnx); + } spin_unlock_irqrestore(&cnx->lock, flags); } -static void veth_handle_ack(struct VethLpEvent *event) +static void veth_handle_ack(struct veth_lpevent *event) { HvLpIndex rlp = event->base_event.xTargetLp; struct veth_lpar_connection *cnx = veth_cnx[rlp]; @@ -329,58 +528,67 @@ static void veth_handle_ack(struct VethLpEvent *event) BUG_ON(! cnx); switch (event->base_event.xSubtype) { - case VethEventTypeCap: + case VETH_EVENT_CAP: veth_take_cap_ack(cnx, event); break; - case VethEventTypeMonitor: + case VETH_EVENT_MONITOR: veth_take_monitor_ack(cnx, event); break; default: - veth_error("Unknown ack type %d from lpar %d\n", - event->base_event.xSubtype, rlp); + veth_error("Unknown ack type %d from LPAR %d.\n", + event->base_event.xSubtype, rlp); }; } -static void veth_handle_int(struct VethLpEvent *event) +static void veth_handle_int(struct veth_lpevent *event) { HvLpIndex rlp = event->base_event.xSourceLp; struct veth_lpar_connection *cnx = veth_cnx[rlp]; unsigned long flags; - int i; + int i, acked = 0; BUG_ON(! cnx); switch (event->base_event.xSubtype) { - case VethEventTypeCap: + case VETH_EVENT_CAP: veth_take_cap(cnx, event); break; - case VethEventTypeMonitor: + case VETH_EVENT_MONITOR: /* do nothing... this'll hang out here til we're dead, * and the hypervisor will return it for us. */ break; - case VethEventTypeFramesAck: + case VETH_EVENT_FRAMES_ACK: spin_lock_irqsave(&cnx->lock, flags); + for (i = 0; i < VETH_MAX_ACKS_PER_MSG; ++i) { u16 msgnum = event->u.frames_ack_data.token[i]; - if (msgnum < VETH_NUMBUFFERS) + if (msgnum < VETH_NUMBUFFERS) { veth_recycle_msg(cnx, cnx->msgs + msgnum); + cnx->outstanding_tx--; + acked++; + } + } + + if (acked > 0) { + cnx->last_contact = jiffies; + veth_wake_queues(cnx); } + spin_unlock_irqrestore(&cnx->lock, flags); - veth_flush_pending(cnx); break; - case VethEventTypeFrames: + case VETH_EVENT_FRAMES: veth_receive(cnx, event); break; default: - veth_error("Unknown interrupt type %d from lpar %d\n", - event->base_event.xSubtype, rlp); + veth_error("Unknown interrupt type %d from LPAR %d.\n", + event->base_event.xSubtype, rlp); }; } static void veth_handle_event(struct HvLpEvent *event, struct pt_regs *regs) { - struct VethLpEvent *veth_event = (struct VethLpEvent *)event; + struct veth_lpevent *veth_event = (struct veth_lpevent *)event; if (event->xFlags.xFunction == HvLpEvent_Function_Ack) veth_handle_ack(veth_event); @@ -390,7 +598,7 @@ static void veth_handle_event(struct HvLpEvent *event, struct pt_regs *regs) static int veth_process_caps(struct veth_lpar_connection *cnx) { - struct VethCapData *remote_caps = &cnx->remote_caps; + struct veth_cap_data *remote_caps = &cnx->remote_caps; int num_acks_needed; /* Convert timer to jiffies */ @@ -400,8 +608,8 @@ static int veth_process_caps(struct veth_lpar_connection *cnx) || (remote_caps->ack_threshold > VETH_MAX_ACKS_PER_MSG) || (remote_caps->ack_threshold == 0) || (cnx->ack_timeout == 0) ) { - veth_error("Received incompatible capabilities from lpar %d\n", - cnx->remote_lp); + veth_error("Received incompatible capabilities from LPAR %d.\n", + cnx->remote_lp); return HvLpEvent_Rc_InvalidSubtypeData; } @@ -418,8 +626,8 @@ static int veth_process_caps(struct veth_lpar_connection *cnx) cnx->num_ack_events += num; if (cnx->num_ack_events < num_acks_needed) { - veth_error("Couldn't allocate enough ack events for lpar %d\n", - cnx->remote_lp); + veth_error("Couldn't allocate enough ack events " + "for LPAR %d.\n", cnx->remote_lp); return HvLpEvent_Rc_BufferNotAvailable; } @@ -440,15 +648,15 @@ static void veth_statemachine(void *p) restart: if (cnx->state & VETH_STATE_RESET) { - int i; - - del_timer(&cnx->ack_timer); - if (cnx->state & VETH_STATE_OPEN) HvCallEvent_closeLpEventPath(cnx->remote_lp, HvLpEvent_Type_VirtualLan); - /* reset ack data */ + /* + * Reset ack data. This prevents the ack_timer actually + * doing anything, even if it runs one more time when + * we drop the lock below. + */ memset(&cnx->pending_acks, 0xff, sizeof (cnx->pending_acks)); cnx->num_pending_acks = 0; @@ -458,14 +666,32 @@ static void veth_statemachine(void *p) | VETH_STATE_SENTCAPACK | VETH_STATE_READY); /* Clean up any leftover messages */ - if (cnx->msgs) + if (cnx->msgs) { + int i; for (i = 0; i < VETH_NUMBUFFERS; ++i) veth_recycle_msg(cnx, cnx->msgs + i); + } + + cnx->outstanding_tx = 0; + veth_wake_queues(cnx); + + /* Drop the lock so we can do stuff that might sleep or + * take other locks. */ spin_unlock_irq(&cnx->lock); - veth_flush_pending(cnx); + + del_timer_sync(&cnx->ack_timer); + del_timer_sync(&cnx->reset_timer); + spin_lock_irq(&cnx->lock); + if (cnx->state & VETH_STATE_RESET) goto restart; + + /* Hack, wait for the other end to reset itself. */ + if (! (cnx->state & VETH_STATE_SHUTDOWN)) { + schedule_delayed_work(&cnx->statemachine_wq, 5 * HZ); + goto out; + } } if (cnx->state & VETH_STATE_SHUTDOWN) @@ -488,7 +714,7 @@ static void veth_statemachine(void *p) if ( (cnx->state & VETH_STATE_OPEN) && !(cnx->state & VETH_STATE_SENTMON) ) { - rc = veth_signalevent(cnx, VethEventTypeMonitor, + rc = veth_signalevent(cnx, VETH_EVENT_MONITOR, HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_DeferredAck, 0, 0, 0, 0, 0, 0); @@ -498,9 +724,8 @@ static void veth_statemachine(void *p) } else { if ( (rc != HvLpEvent_Rc_PartitionDead) && (rc != HvLpEvent_Rc_PathClosed) ) - veth_error("Error sending monitor to " - "lpar %d, rc=%x\n", - rlp, (int) rc); + veth_error("Error sending monitor to LPAR %d, " + "rc = %d\n", rlp, rc); /* Oh well, hope we get a cap from the other * end and do better when that kicks us */ @@ -512,7 +737,7 @@ static void veth_statemachine(void *p) && !(cnx->state & VETH_STATE_SENTCAPS)) { u64 *rawcap = (u64 *)&cnx->local_caps; - rc = veth_signalevent(cnx, VethEventTypeCap, + rc = veth_signalevent(cnx, VETH_EVENT_CAP, HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, 0, rawcap[0], rawcap[1], rawcap[2], @@ -523,9 +748,9 @@ static void veth_statemachine(void *p) } else { if ( (rc != HvLpEvent_Rc_PartitionDead) && (rc != HvLpEvent_Rc_PathClosed) ) - veth_error("Error sending caps to " - "lpar %d, rc=%x\n", - rlp, (int) rc); + veth_error("Error sending caps to LPAR %d, " + "rc = %d\n", rlp, rc); + /* Oh well, hope we get a cap from the other * end and do better when that kicks us */ goto out; @@ -534,7 +759,7 @@ static void veth_statemachine(void *p) if ((cnx->state & VETH_STATE_GOTCAPS) && !(cnx->state & VETH_STATE_SENTCAPACK)) { - struct VethCapData *remote_caps = &cnx->remote_caps; + struct veth_cap_data *remote_caps = &cnx->remote_caps; memcpy(remote_caps, &cnx->cap_event.u.caps_data, sizeof(*remote_caps)); @@ -565,10 +790,8 @@ static void veth_statemachine(void *p) add_timer(&cnx->ack_timer); cnx->state |= VETH_STATE_READY; } else { - veth_printk(KERN_ERR, "Caps rejected (rc=%d) by " - "lpar %d\n", - cnx->cap_ack_event.base_event.xRc, - rlp); + veth_error("Caps rejected by LPAR %d, rc = %d\n", + rlp, cnx->cap_ack_event.base_event.xRc); goto cant_cope; } } @@ -581,8 +804,8 @@ static void veth_statemachine(void *p) /* FIXME: we get here if something happens we really can't * cope with. The link will never work once we get here, and * all we can do is not lock the rest of the system up */ - veth_error("Badness on connection to lpar %d (state=%04lx) " - " - shutting down\n", rlp, cnx->state); + veth_error("Unrecoverable error on connection to LPAR %d, shutting down" + " (state = 0x%04lx)\n", rlp, cnx->state); cnx->state |= VETH_STATE_SHUTDOWN; spin_unlock_irq(&cnx->lock); } @@ -591,7 +814,7 @@ static int veth_init_connection(u8 rlp) { struct veth_lpar_connection *cnx; struct veth_msg *msgs; - int i; + int i, rc; if ( (rlp == this_lp) || ! HvLpConfig_doLpsCommunicateOnVirtualLan(this_lp, rlp) ) @@ -605,22 +828,36 @@ static int veth_init_connection(u8 rlp) cnx->remote_lp = rlp; spin_lock_init(&cnx->lock); INIT_WORK(&cnx->statemachine_wq, veth_statemachine, cnx); + init_timer(&cnx->ack_timer); cnx->ack_timer.function = veth_timed_ack; cnx->ack_timer.data = (unsigned long) cnx; + + init_timer(&cnx->reset_timer); + cnx->reset_timer.function = veth_timed_reset; + cnx->reset_timer.data = (unsigned long) cnx; + cnx->reset_timeout = 5 * HZ * (VETH_ACKTIMEOUT / 1000000); + memset(&cnx->pending_acks, 0xff, sizeof (cnx->pending_acks)); veth_cnx[rlp] = cnx; + /* This gets us 1 reference, which is held on behalf of the driver + * infrastructure. It's released at module unload. */ + kobject_init(&cnx->kobject); + cnx->kobject.ktype = &veth_lpar_connection_ktype; + rc = kobject_set_name(&cnx->kobject, "cnx%.2d", rlp); + if (rc != 0) + return rc; + msgs = kmalloc(VETH_NUMBUFFERS * sizeof(struct veth_msg), GFP_KERNEL); if (! msgs) { - veth_error("Can't allocate buffers for lpar %d\n", rlp); + veth_error("Can't allocate buffers for LPAR %d.\n", rlp); return -ENOMEM; } cnx->msgs = msgs; memset(msgs, 0, VETH_NUMBUFFERS * sizeof(struct veth_msg)); - spin_lock_init(&cnx->msg_stack_lock); for (i = 0; i < VETH_NUMBUFFERS; i++) { msgs[i].token = i; @@ -630,8 +867,7 @@ static int veth_init_connection(u8 rlp) cnx->num_events = veth_allocate_events(rlp, 2 + VETH_NUMBUFFERS); if (cnx->num_events < (2 + VETH_NUMBUFFERS)) { - veth_error("Can't allocate events for lpar %d, only got %d\n", - rlp, cnx->num_events); + veth_error("Can't allocate enough events for LPAR %d.\n", rlp); return -ENOMEM; } @@ -642,11 +878,9 @@ static int veth_init_connection(u8 rlp) return 0; } -static void veth_stop_connection(u8 rlp) +static void veth_stop_connection(struct veth_lpar_connection *cnx) { - struct veth_lpar_connection *cnx = veth_cnx[rlp]; - - if (! cnx) + if (!cnx) return; spin_lock_irq(&cnx->lock); @@ -654,12 +888,23 @@ static void veth_stop_connection(u8 rlp) veth_kick_statemachine(cnx); spin_unlock_irq(&cnx->lock); + /* There's a slim chance the reset code has just queued the + * statemachine to run in five seconds. If so we need to cancel + * that and requeue the work to run now. */ + if (cancel_delayed_work(&cnx->statemachine_wq)) { + spin_lock_irq(&cnx->lock); + veth_kick_statemachine(cnx); + spin_unlock_irq(&cnx->lock); + } + + /* Wait for the state machine to run. */ flush_scheduled_work(); +} - /* FIXME: not sure if this is necessary - will already have - * been deleted by the state machine, just want to make sure - * its not running any more */ - del_timer_sync(&cnx->ack_timer); +static void veth_destroy_connection(struct veth_lpar_connection *cnx) +{ + if (!cnx) + return; if (cnx->num_events > 0) mf_deallocate_lp_events(cnx->remote_lp, @@ -671,18 +916,18 @@ static void veth_stop_connection(u8 rlp) HvLpEvent_Type_VirtualLan, cnx->num_ack_events, NULL, NULL); -} - -static void veth_destroy_connection(u8 rlp) -{ - struct veth_lpar_connection *cnx = veth_cnx[rlp]; - - if (! cnx) - return; kfree(cnx->msgs); + veth_cnx[cnx->remote_lp] = NULL; kfree(cnx); - veth_cnx[rlp] = NULL; +} + +static void veth_release_connection(struct kobject *kobj) +{ + struct veth_lpar_connection *cnx; + cnx = container_of(kobj, struct veth_lpar_connection, kobject); + veth_stop_connection(cnx); + veth_destroy_connection(cnx); } /* @@ -726,17 +971,15 @@ static void veth_set_multicast_list(struct net_device *dev) write_lock_irqsave(&port->mcast_gate, flags); - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - printk(KERN_INFO "%s: Promiscuous mode enabled.\n", - dev->name); + if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (dev->mc_count > VETH_MAX_MCAST)) { port->promiscuous = 1; - } else if ( (dev->flags & IFF_ALLMULTI) - || (dev->mc_count > VETH_MAX_MCAST) ) { - port->all_mcast = 1; } else { struct dev_mc_list *dmi = dev->mc_list; int i; + port->promiscuous = 0; + /* Update table */ port->num_mcast = 0; @@ -758,9 +1001,10 @@ static void veth_set_multicast_list(struct net_device *dev) static void veth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strncpy(info->driver, "veth", sizeof(info->driver) - 1); + strncpy(info->driver, DRV_NAME, sizeof(info->driver) - 1); info->driver[sizeof(info->driver) - 1] = '\0'; - strncpy(info->version, "1.0", sizeof(info->version) - 1); + strncpy(info->version, DRV_VERSION, sizeof(info->version) - 1); + info->version[sizeof(info->version) - 1] = '\0'; } static int veth_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -791,49 +1035,6 @@ static struct ethtool_ops ops = { .get_link = veth_get_link, }; -static void veth_tx_timeout(struct net_device *dev) -{ - struct veth_port *port = (struct veth_port *)dev->priv; - struct net_device_stats *stats = &port->stats; - unsigned long flags; - int i; - - stats->tx_errors++; - - spin_lock_irqsave(&port->pending_gate, flags); - - if (!port->pending_lpmask) { - spin_unlock_irqrestore(&port->pending_gate, flags); - return; - } - - printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n", - dev->name, port->pending_lpmask); - - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { - struct veth_lpar_connection *cnx = veth_cnx[i]; - - if (! (port->pending_lpmask & (1<<i))) - continue; - - /* If we're pending on it, we must be connected to it, - * so we should certainly have a structure for it. */ - BUG_ON(! cnx); - - /* Theoretically we could be kicking a connection - * which doesn't deserve it, but in practice if we've - * had a Tx timeout, the pending_lpmask will have - * exactly one bit set - the connection causing the - * problem. */ - spin_lock(&cnx->lock); - cnx->state |= VETH_STATE_RESET; - veth_kick_statemachine(cnx); - spin_unlock(&cnx->lock); - } - - spin_unlock_irqrestore(&port->pending_gate, flags); -} - static struct net_device * __init veth_probe_one(int vlan, struct device *vdev) { struct net_device *dev; @@ -848,8 +1049,9 @@ static struct net_device * __init veth_probe_one(int vlan, struct device *vdev) port = (struct veth_port *) dev->priv; - spin_lock_init(&port->pending_gate); + spin_lock_init(&port->queue_lock); rwlock_init(&port->mcast_gate); + port->stopped_map = 0; for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { HvLpVirtualLanIndexMap map; @@ -882,22 +1084,24 @@ static struct net_device * __init veth_probe_one(int vlan, struct device *vdev) dev->set_multicast_list = veth_set_multicast_list; SET_ETHTOOL_OPS(dev, &ops); - dev->watchdog_timeo = 2 * (VETH_ACKTIMEOUT * HZ / 1000000); - dev->tx_timeout = veth_tx_timeout; - SET_NETDEV_DEV(dev, vdev); rc = register_netdev(dev); if (rc != 0) { - veth_printk(KERN_ERR, - "Failed to register ethernet device for vlan %d\n", - vlan); + veth_error("Failed registering net device for vlan%d.\n", vlan); free_netdev(dev); return NULL; } - veth_printk(KERN_DEBUG, "%s attached to iSeries vlan %d (lpar_map=0x%04x)\n", - dev->name, vlan, port->lpar_map); + kobject_init(&port->kobject); + port->kobject.parent = &dev->class_dev.kobj; + port->kobject.ktype = &veth_port_ktype; + kobject_set_name(&port->kobject, "veth_port"); + if (0 != kobject_add(&port->kobject)) + veth_error("Failed adding port for %s to sysfs.\n", dev->name); + + veth_info("%s attached to iSeries vlan %d (LPAR map = 0x%.4X)\n", + dev->name, vlan, port->lpar_map); return dev; } @@ -912,98 +1116,95 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp, struct veth_lpar_connection *cnx = veth_cnx[rlp]; struct veth_port *port = (struct veth_port *) dev->priv; HvLpEvent_Rc rc; - u32 dma_address, dma_length; struct veth_msg *msg = NULL; - int err = 0; unsigned long flags; - if (! cnx) { - port->stats.tx_errors++; - dev_kfree_skb(skb); + if (! cnx) return 0; - } spin_lock_irqsave(&cnx->lock, flags); if (! (cnx->state & VETH_STATE_READY)) - goto drop; + goto no_error; - if ((skb->len - 14) > VETH_MAX_MTU) + if ((skb->len - ETH_HLEN) > VETH_MAX_MTU) goto drop; msg = veth_stack_pop(cnx); - - if (! msg) { - err = 1; + if (! msg) goto drop; - } - dma_length = skb->len; - dma_address = dma_map_single(port->dev, skb->data, - dma_length, DMA_TO_DEVICE); + msg->in_use = 1; + msg->skb = skb_get(skb); + + msg->data.addr[0] = dma_map_single(port->dev, skb->data, + skb->len, DMA_TO_DEVICE); - if (dma_mapping_error(dma_address)) + if (dma_mapping_error(msg->data.addr[0])) goto recycle_and_drop; - /* Is it really necessary to check the length and address - * fields of the first entry here? */ - msg->skb = skb; msg->dev = port->dev; - msg->data.addr[0] = dma_address; - msg->data.len[0] = dma_length; + msg->data.len[0] = skb->len; msg->data.eofmask = 1 << VETH_EOF_SHIFT; - set_bit(0, &(msg->in_use)); - rc = veth_signaldata(cnx, VethEventTypeFrames, msg->token, &msg->data); + + rc = veth_signaldata(cnx, VETH_EVENT_FRAMES, msg->token, &msg->data); if (rc != HvLpEvent_Rc_Good) goto recycle_and_drop; + /* If the timer's not already running, start it now. */ + if (0 == cnx->outstanding_tx) + mod_timer(&cnx->reset_timer, jiffies + cnx->reset_timeout); + + cnx->last_contact = jiffies; + cnx->outstanding_tx++; + + if (veth_stack_is_empty(cnx)) + veth_stop_queues(cnx); + + no_error: spin_unlock_irqrestore(&cnx->lock, flags); return 0; recycle_and_drop: - msg->skb = NULL; - /* need to set in use to make veth_recycle_msg in case this - * was a mapping failure */ - set_bit(0, &msg->in_use); veth_recycle_msg(cnx, msg); drop: - port->stats.tx_errors++; - dev_kfree_skb(skb); spin_unlock_irqrestore(&cnx->lock, flags); - return err; + return 1; } -static HvLpIndexMap veth_transmit_to_many(struct sk_buff *skb, +static void veth_transmit_to_many(struct sk_buff *skb, HvLpIndexMap lpmask, struct net_device *dev) { struct veth_port *port = (struct veth_port *) dev->priv; - int i; - int rc; + int i, success, error; + + success = error = 0; for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { if ((lpmask & (1 << i)) == 0) continue; - rc = veth_transmit_to_one(skb_get(skb), i, dev); - if (! rc) - lpmask &= ~(1<<i); + if (veth_transmit_to_one(skb, i, dev)) + error = 1; + else + success = 1; } - if (! lpmask) { + if (error) + port->stats.tx_errors++; + + if (success) { port->stats.tx_packets++; port->stats.tx_bytes += skb->len; } - - return lpmask; } static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev) { unsigned char *frame = skb->data; struct veth_port *port = (struct veth_port *) dev->priv; - unsigned long flags; HvLpIndexMap lpmask; if (! (frame[0] & 0x01)) { @@ -1020,44 +1221,27 @@ static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev) lpmask = port->lpar_map; } - spin_lock_irqsave(&port->pending_gate, flags); - - lpmask = veth_transmit_to_many(skb, lpmask, dev); - - dev->trans_start = jiffies; + veth_transmit_to_many(skb, lpmask, dev); - if (! lpmask) { - dev_kfree_skb(skb); - } else { - if (port->pending_skb) { - veth_error("%s: Tx while skb was pending!\n", - dev->name); - dev_kfree_skb(skb); - spin_unlock_irqrestore(&port->pending_gate, flags); - return 1; - } - - port->pending_skb = skb; - port->pending_lpmask = lpmask; - netif_stop_queue(dev); - } - - spin_unlock_irqrestore(&port->pending_gate, flags); + dev_kfree_skb(skb); return 0; } +/* You must hold the connection's lock when you call this function. */ static void veth_recycle_msg(struct veth_lpar_connection *cnx, struct veth_msg *msg) { u32 dma_address, dma_length; - if (test_and_clear_bit(0, &msg->in_use)) { + if (msg->in_use) { + msg->in_use = 0; dma_address = msg->data.addr[0]; dma_length = msg->data.len[0]; - dma_unmap_single(msg->dev, dma_address, dma_length, - DMA_TO_DEVICE); + if (!dma_mapping_error(dma_address)) + dma_unmap_single(msg->dev, dma_address, dma_length, + DMA_TO_DEVICE); if (msg->skb) { dev_kfree_skb_any(msg->skb); @@ -1066,15 +1250,16 @@ static void veth_recycle_msg(struct veth_lpar_connection *cnx, memset(&msg->data, 0, sizeof(msg->data)); veth_stack_push(cnx, msg); - } else - if (cnx->state & VETH_STATE_OPEN) - veth_error("Bogus frames ack from lpar %d (#%d)\n", - cnx->remote_lp, msg->token); + } else if (cnx->state & VETH_STATE_OPEN) { + veth_error("Non-pending frame (# %d) acked by LPAR %d.\n", + cnx->remote_lp, msg->token); + } } -static void veth_flush_pending(struct veth_lpar_connection *cnx) +static void veth_wake_queues(struct veth_lpar_connection *cnx) { int i; + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { struct net_device *dev = veth_dev[i]; struct veth_port *port; @@ -1088,20 +1273,77 @@ static void veth_flush_pending(struct veth_lpar_connection *cnx) if (! (port->lpar_map & (1<<cnx->remote_lp))) continue; - spin_lock_irqsave(&port->pending_gate, flags); - if (port->pending_skb) { - port->pending_lpmask = - veth_transmit_to_many(port->pending_skb, - port->pending_lpmask, - dev); - if (! port->pending_lpmask) { - dev_kfree_skb_any(port->pending_skb); - port->pending_skb = NULL; - netif_wake_queue(dev); - } + spin_lock_irqsave(&port->queue_lock, flags); + + port->stopped_map &= ~(1 << cnx->remote_lp); + + if (0 == port->stopped_map && netif_queue_stopped(dev)) { + veth_debug("cnx %d: woke queue for %s.\n", + cnx->remote_lp, dev->name); + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&port->queue_lock, flags); + } +} + +static void veth_stop_queues(struct veth_lpar_connection *cnx) +{ + int i; + + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { + struct net_device *dev = veth_dev[i]; + struct veth_port *port; + + if (! dev) + continue; + + port = (struct veth_port *)dev->priv; + + /* If this cnx is not on the vlan for this port, continue */ + if (! (port->lpar_map & (1 << cnx->remote_lp))) + continue; + + spin_lock(&port->queue_lock); + + netif_stop_queue(dev); + port->stopped_map |= (1 << cnx->remote_lp); + + veth_debug("cnx %d: stopped queue for %s, map = 0x%x.\n", + cnx->remote_lp, dev->name, port->stopped_map); + + spin_unlock(&port->queue_lock); + } +} + +static void veth_timed_reset(unsigned long ptr) +{ + struct veth_lpar_connection *cnx = (struct veth_lpar_connection *)ptr; + unsigned long trigger_time, flags; + + /* FIXME is it possible this fires after veth_stop_connection()? + * That would reschedule the statemachine for 5 seconds and probably + * execute it after the module's been unloaded. Hmm. */ + + spin_lock_irqsave(&cnx->lock, flags); + + if (cnx->outstanding_tx > 0) { + trigger_time = cnx->last_contact + cnx->reset_timeout; + + if (trigger_time < jiffies) { + cnx->state |= VETH_STATE_RESET; + veth_kick_statemachine(cnx); + veth_error("%d packets not acked by LPAR %d within %d " + "seconds, resetting.\n", + cnx->outstanding_tx, cnx->remote_lp, + cnx->reset_timeout / HZ); + } else { + /* Reschedule the timer */ + trigger_time = jiffies + cnx->reset_timeout; + mod_timer(&cnx->reset_timer, trigger_time); } - spin_unlock_irqrestore(&port->pending_gate, flags); } + + spin_unlock_irqrestore(&cnx->lock, flags); } /* @@ -1117,12 +1359,9 @@ static inline int veth_frame_wanted(struct veth_port *port, u64 mac_addr) if ( (mac_addr == port->mac_addr) || (mac_addr == 0xffffffffffff0000) ) return 1; - if (! (((char *) &mac_addr)[0] & 0x01)) - return 0; - read_lock_irqsave(&port->mcast_gate, flags); - if (port->promiscuous || port->all_mcast) { + if (port->promiscuous) { wanted = 1; goto out; } @@ -1175,21 +1414,21 @@ static void veth_flush_acks(struct veth_lpar_connection *cnx) { HvLpEvent_Rc rc; - rc = veth_signaldata(cnx, VethEventTypeFramesAck, + rc = veth_signaldata(cnx, VETH_EVENT_FRAMES_ACK, 0, &cnx->pending_acks); if (rc != HvLpEvent_Rc_Good) - veth_error("Error 0x%x acking frames from lpar %d!\n", - (unsigned)rc, cnx->remote_lp); + veth_error("Failed acking frames from LPAR %d, rc = %d\n", + cnx->remote_lp, (int)rc); cnx->num_pending_acks = 0; memset(&cnx->pending_acks, 0xff, sizeof(cnx->pending_acks)); } static void veth_receive(struct veth_lpar_connection *cnx, - struct VethLpEvent *event) + struct veth_lpevent *event) { - struct VethFramesData *senddata = &event->u.frames_data; + struct veth_frames_data *senddata = &event->u.frames_data; int startchunk = 0; int nchunks; unsigned long flags; @@ -1216,9 +1455,10 @@ static void veth_receive(struct veth_lpar_connection *cnx, /* make sure that we have at least 1 EOF entry in the * remaining entries */ if (! (senddata->eofmask >> (startchunk + VETH_EOF_SHIFT))) { - veth_error("missing EOF frag in event " - "eofmask=0x%x startchunk=%d\n", - (unsigned) senddata->eofmask, startchunk); + veth_error("Missing EOF fragment in event " + "eofmask = 0x%x startchunk = %d\n", + (unsigned)senddata->eofmask, + startchunk); break; } @@ -1237,8 +1477,9 @@ static void veth_receive(struct veth_lpar_connection *cnx, /* nchunks == # of chunks in this frame */ if ((length - ETH_HLEN) > VETH_MAX_MTU) { - veth_error("Received oversize frame from lpar %d " - "(length=%d)\n", cnx->remote_lp, length); + veth_error("Received oversize frame from LPAR %d " + "(length = %d)\n", + cnx->remote_lp, length); continue; } @@ -1331,15 +1572,33 @@ static void veth_timed_ack(unsigned long ptr) static int veth_remove(struct vio_dev *vdev) { - int i = vdev->unit_address; + struct veth_lpar_connection *cnx; struct net_device *dev; + struct veth_port *port; + int i; - dev = veth_dev[i]; - if (dev != NULL) { - veth_dev[i] = NULL; - unregister_netdev(dev); - free_netdev(dev); + dev = veth_dev[vdev->unit_address]; + + if (! dev) + return 0; + + port = netdev_priv(dev); + + for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { + cnx = veth_cnx[i]; + + if (cnx && (port->lpar_map & (1 << i))) { + /* Drop our reference to connections on our VLAN */ + kobject_put(&cnx->kobject); + } } + + veth_dev[vdev->unit_address] = NULL; + kobject_del(&port->kobject); + kobject_put(&port->kobject); + unregister_netdev(dev); + free_netdev(dev); + return 0; } @@ -1347,6 +1606,7 @@ static int veth_probe(struct vio_dev *vdev, const struct vio_device_id *id) { int i = vdev->unit_address; struct net_device *dev; + struct veth_port *port; dev = veth_probe_one(i, &vdev->dev); if (dev == NULL) { @@ -1355,11 +1615,23 @@ static int veth_probe(struct vio_dev *vdev, const struct vio_device_id *id) } veth_dev[i] = dev; - /* Start the state machine on each connection, to commence - * link negotiation */ - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) - if (veth_cnx[i]) - veth_kick_statemachine(veth_cnx[i]); + port = (struct veth_port*)netdev_priv(dev); + + /* Start the state machine on each connection on this vlan. If we're + * the first dev to do so this will commence link negotiation */ + for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { + struct veth_lpar_connection *cnx; + + if (! (port->lpar_map & (1 << i))) + continue; + + cnx = veth_cnx[i]; + if (!cnx) + continue; + + kobject_get(&cnx->kobject); + veth_kick_statemachine(cnx); + } return 0; } @@ -1375,7 +1647,7 @@ static struct vio_device_id veth_device_table[] __devinitdata = { MODULE_DEVICE_TABLE(vio, veth_device_table); static struct vio_driver veth_driver = { - .name = "iseries_veth", + .name = DRV_NAME, .id_table = veth_device_table, .probe = veth_probe, .remove = veth_remove @@ -1388,29 +1660,29 @@ static struct vio_driver veth_driver = { void __exit veth_module_cleanup(void) { int i; + struct veth_lpar_connection *cnx; - /* Stop the queues first to stop any new packets being sent. */ - for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) - if (veth_dev[i]) - netif_stop_queue(veth_dev[i]); - - /* Stop the connections before we unregister the driver. This - * ensures there's no skbs lying around holding the device open. */ - for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) - veth_stop_connection(i); - + /* Disconnect our "irq" to stop events coming from the Hypervisor. */ HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan); - /* Hypervisor callbacks may have scheduled more work while we - * were stoping connections. Now that we've disconnected from - * the hypervisor make sure everything's finished. */ + /* Make sure any work queued from Hypervisor callbacks is finished. */ flush_scheduled_work(); - vio_unregister_driver(&veth_driver); + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) { + cnx = veth_cnx[i]; + + if (!cnx) + continue; - for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) - veth_destroy_connection(i); + /* Remove the connection from sysfs */ + kobject_del(&cnx->kobject); + /* Drop the driver's reference to the connection */ + kobject_put(&cnx->kobject); + } + /* Unregister the driver, which will close all the netdevs and stop + * the connections when they're no longer referenced. */ + vio_unregister_driver(&veth_driver); } module_exit(veth_module_cleanup); @@ -1423,15 +1695,37 @@ int __init veth_module_init(void) for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) { rc = veth_init_connection(i); - if (rc != 0) { - veth_module_cleanup(); - return rc; - } + if (rc != 0) + goto error; } HvLpEvent_registerHandler(HvLpEvent_Type_VirtualLan, &veth_handle_event); - return vio_register_driver(&veth_driver); + rc = vio_register_driver(&veth_driver); + if (rc != 0) + goto error; + + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) { + struct kobject *kobj; + + if (!veth_cnx[i]) + continue; + + kobj = &veth_cnx[i]->kobject; + kobj->parent = &veth_driver.driver.kobj; + /* If the add failes, complain but otherwise continue */ + if (0 != kobject_add(kobj)) + veth_error("cnx %d: Failed adding to sysfs.\n", i); + } + + return 0; + +error: + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) { + veth_destroy_connection(veth_cnx[i]); + } + + return rc; } module_init(veth_module_init); diff --git a/drivers/net/iseries_veth.h b/drivers/net/iseries_veth.h deleted file mode 100644 index d9370f79b83..00000000000 --- a/drivers/net/iseries_veth.h +++ /dev/null @@ -1,46 +0,0 @@ -/* File veth.h created by Kyle A. Lucke on Mon Aug 7 2000. */ - -#ifndef _ISERIES_VETH_H -#define _ISERIES_VETH_H - -#define VethEventTypeCap (0) -#define VethEventTypeFrames (1) -#define VethEventTypeMonitor (2) -#define VethEventTypeFramesAck (3) - -#define VETH_MAX_ACKS_PER_MSG (20) -#define VETH_MAX_FRAMES_PER_MSG (6) - -struct VethFramesData { - u32 addr[VETH_MAX_FRAMES_PER_MSG]; - u16 len[VETH_MAX_FRAMES_PER_MSG]; - u32 eofmask; -}; -#define VETH_EOF_SHIFT (32-VETH_MAX_FRAMES_PER_MSG) - -struct VethFramesAckData { - u16 token[VETH_MAX_ACKS_PER_MSG]; -}; - -struct VethCapData { - u8 caps_version; - u8 rsvd1; - u16 num_buffers; - u16 ack_threshold; - u16 rsvd2; - u32 ack_timeout; - u32 rsvd3; - u64 rsvd4[3]; -}; - -struct VethLpEvent { - struct HvLpEvent base_event; - union { - struct VethCapData caps_data; - struct VethFramesData frames_data; - struct VethFramesAckData frames_ack_data; - } u; - -}; - -#endif /* _ISERIES_VETH_H */ diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index fb6b232069d..7c9dbc8c942 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -58,11 +58,10 @@ #define INT_CAUSE_UNMASK_ALL 0x0007ffff #define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff -#ifdef MV643XX_RX_QUEUE_FILL_ON_TASK #define INT_CAUSE_MASK_ALL 0x00000000 +#define INT_CAUSE_MASK_ALL_EXT 0x00000000 #define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL #define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT -#endif #ifdef MV643XX_CHECKSUM_OFFLOAD_TX #define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1) @@ -259,14 +258,13 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev) static void mv643xx_eth_set_rx_mode(struct net_device *dev) { struct mv643xx_private *mp = netdev_priv(dev); - u32 config_reg; - config_reg = ethernet_get_config_reg(mp->port_num); if (dev->flags & IFF_PROMISC) - config_reg |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE; + mp->port_config |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE; else - config_reg &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE; - ethernet_set_config_reg(mp->port_num, config_reg); + mp->port_config &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE; + + mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), mp->port_config); } /* @@ -369,15 +367,6 @@ static int mv643xx_eth_free_tx_queue(struct net_device *dev, dev_kfree_skb_irq(pkt_info.return_info); released = 0; - - /* - * Decrement the number of outstanding skbs counter on - * the TX queue. - */ - if (mp->tx_ring_skbs == 0) - panic("ERROR - TX outstanding SKBs" - " counter is corrupted"); - mp->tx_ring_skbs--; } else dma_unmap_page(NULL, pkt_info.buf_ptr, pkt_info.byte_cnt, DMA_TO_DEVICE); @@ -412,15 +401,13 @@ static int mv643xx_eth_receive_queue(struct net_device *dev) struct pkt_info pkt_info; #ifdef MV643XX_NAPI - while (eth_port_receive(mp, &pkt_info) == ETH_OK && budget > 0) { + while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) { #else while (eth_port_receive(mp, &pkt_info) == ETH_OK) { #endif mp->rx_ring_skbs--; received_packets++; -#ifdef MV643XX_NAPI - budget--; -#endif + /* Update statistics. Note byte count includes 4 byte CRC count */ stats->rx_packets++; stats->rx_bytes += pkt_info.byte_cnt; @@ -1044,9 +1031,6 @@ static void mv643xx_tx(struct net_device *dev) DMA_TO_DEVICE); dev_kfree_skb_irq(pkt_info.return_info); - - if (mp->tx_ring_skbs) - mp->tx_ring_skbs--; } else dma_unmap_page(NULL, pkt_info.buf_ptr, pkt_info.byte_cnt, DMA_TO_DEVICE); @@ -1189,7 +1173,6 @@ linear: pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); pkt_info.return_info = skb; - mp->tx_ring_skbs++; status = eth_port_send(mp, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) printk(KERN_ERR "%s: Error on transmitting packet\n", @@ -1274,7 +1257,6 @@ linear: pkt_info.cmd_sts |= ETH_TX_ENABLE_INTERRUPT | ETH_TX_LAST_DESC; pkt_info.return_info = skb; - mp->tx_ring_skbs++; } else { pkt_info.return_info = 0; } @@ -1311,7 +1293,6 @@ linear: pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); pkt_info.return_info = skb; - mp->tx_ring_skbs++; status = eth_port_send(mp, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) printk(KERN_ERR "%s: Error on transmitting packet\n", @@ -1356,6 +1337,43 @@ static struct net_device_stats *mv643xx_eth_get_stats(struct net_device *dev) return &mp->stats; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static inline void mv643xx_enable_irq(struct mv643xx_private *mp) +{ + int port_num = mp->port_num; + unsigned long flags; + + spin_lock_irqsave(&mp->lock, flags); + mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), + INT_CAUSE_UNMASK_ALL); + mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num), + INT_CAUSE_UNMASK_ALL_EXT); + spin_unlock_irqrestore(&mp->lock, flags); +} + +static inline void mv643xx_disable_irq(struct mv643xx_private *mp) +{ + int port_num = mp->port_num; + unsigned long flags; + + spin_lock_irqsave(&mp->lock, flags); + mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), + INT_CAUSE_MASK_ALL); + mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num), + INT_CAUSE_MASK_ALL_EXT); + spin_unlock_irqrestore(&mp->lock, flags); +} + +static void mv643xx_netpoll(struct net_device *netdev) +{ + struct mv643xx_private *mp = netdev_priv(netdev); + + mv643xx_disable_irq(mp); + mv643xx_eth_int_handler(netdev->irq, netdev, NULL); + mv643xx_enable_irq(mp); +} +#endif + /*/ * mv643xx_eth_probe * @@ -1406,6 +1424,10 @@ static int mv643xx_eth_probe(struct device *ddev) dev->weight = 64; #endif +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = mv643xx_netpoll; +#endif + dev->watchdog_timeo = 2 * HZ; dev->tx_queue_len = mp->tx_ring_size; dev->base_addr = 0; @@ -1883,6 +1905,9 @@ static void eth_port_start(struct mv643xx_private *mp) /* Enable port Rx. */ mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), mp->port_rx_queue_command); + + /* Disable port bandwidth limits by clearing MTU register */ + mv_write(MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port_num), 0); } /* @@ -2292,34 +2317,6 @@ static void eth_port_reset(unsigned int port_num) mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data); } -/* - * ethernet_set_config_reg - Set specified bits in configuration register. - * - * DESCRIPTION: - * This function sets specified bits in the given ethernet - * configuration register. - * - * INPUT: - * unsigned int eth_port_num Ethernet Port number. - * unsigned int value 32 bit value. - * - * OUTPUT: - * The set bits in the value parameter are set in the configuration - * register. - * - * RETURN: - * None. - * - */ -static void ethernet_set_config_reg(unsigned int eth_port_num, - unsigned int value) -{ - unsigned int eth_config_reg; - - eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num)); - eth_config_reg |= value; - mv_write(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num), eth_config_reg); -} static int eth_port_autoneg_supported(unsigned int eth_port_num) { @@ -2346,31 +2343,6 @@ static int eth_port_link_is_up(unsigned int eth_port_num) } /* - * ethernet_get_config_reg - Get the port configuration register - * - * DESCRIPTION: - * This function returns the configuration register value of the given - * ethernet port. - * - * INPUT: - * unsigned int eth_port_num Ethernet Port number. - * - * OUTPUT: - * None. - * - * RETURN: - * Port configuration register value. - */ -static unsigned int ethernet_get_config_reg(unsigned int eth_port_num) -{ - unsigned int eth_config_reg; - - eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_EXTEND_REG - (eth_port_num)); - return eth_config_reg; -} - -/* * eth_port_read_smi_reg - Read PHY registers * * DESCRIPTION: @@ -2528,6 +2500,9 @@ static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp, return ETH_ERROR; } + mp->tx_ring_skbs++; + BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size); + /* Get the Tx Desc ring indexes */ tx_desc_curr = mp->tx_curr_desc_q; tx_desc_used = mp->tx_used_desc_q; @@ -2594,6 +2569,9 @@ static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp, if (mp->tx_resource_err) return ETH_QUEUE_FULL; + mp->tx_ring_skbs++; + BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size); + /* Get the Tx Desc ring indexes */ tx_desc_curr = mp->tx_curr_desc_q; tx_desc_used = mp->tx_used_desc_q; @@ -2694,6 +2672,9 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc(struct mv643xx_private *mp, /* Any Tx return cancels the Tx resource error status */ mp->tx_resource_err = 0; + BUG_ON(mp->tx_ring_skbs == 0); + mp->tx_ring_skbs--; + return ETH_OK; } diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h index 7678b59c295..bcfda5192da 100644 --- a/drivers/net/mv643xx_eth.h +++ b/drivers/net/mv643xx_eth.h @@ -408,10 +408,6 @@ static void eth_port_init(struct mv643xx_private *mp); static void eth_port_reset(unsigned int eth_port_num); static void eth_port_start(struct mv643xx_private *mp); -static void ethernet_set_config_reg(unsigned int eth_port_num, - unsigned int value); -static unsigned int ethernet_get_config_reg(unsigned int eth_port_num); - /* Port MAC address routines */ static void eth_port_uc_addr_set(unsigned int eth_port_num, unsigned char *p_addr); diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c index 6c92f096901..73501d84658 100644 --- a/drivers/net/ne3210.c +++ b/drivers/net/ne3210.c @@ -26,9 +26,6 @@ Updated to EISA probing API 5/2003 by Marc Zyngier. */ -static const char *version = - "ne3210.c: Driver revision v0.03, 30/09/98\n"; - #include <linux/module.h> #include <linux/eisa.h> #include <linux/kernel.h> @@ -197,7 +194,7 @@ static int __init ne3210_eisa_probe (struct device *device) ei_status.priv = phys_mem; if (ei_debug > 0) - printk(version); + printk("ne3210 loaded.\n"); ei_status.reset_8390 = &ne3210_reset_8390; ei_status.block_input = &ne3210_block_input; @@ -360,12 +357,12 @@ MODULE_DESCRIPTION("NE3210 EISA Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(eisa, ne3210_ids); -int ne3210_init(void) +static int ne3210_init(void) { return eisa_driver_register (&ne3210_eisa_driver); } -void ne3210_cleanup(void) +static void ne3210_cleanup(void) { eisa_driver_unregister (&ne3210_eisa_driver); } diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6a2fe358347..14f4de1a818 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -6,7 +6,7 @@ menu "PHY device support" config PHYLIB tristate "PHY Device support and infrastructure" - depends on NET_ETHERNET + depends on NET_ETHERNET && (BROKEN || !ARCH_S390) help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 41f62c0c5fc..90630672703 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -128,7 +128,7 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) /* Suspend and resume. Copied from platform_suspend and * platform_resume */ -static int mdio_bus_suspend(struct device * dev, u32 state) +static int mdio_bus_suspend(struct device * dev, pm_message_t state) { int ret = 0; struct device_driver *drv = dev->driver; @@ -170,7 +170,7 @@ int __init mdio_bus_init(void) return bus_register(&mdio_bus_type); } -void __exit mdio_bus_exit(void) +void mdio_bus_exit(void) { bus_unregister(&mdio_bus_type); } diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 2234a8f05eb..7cefe5507b9 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -1,5 +1,5 @@ /************************************************************************ - * regs.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * regs.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -713,13 +713,16 @@ typedef struct _XENA_dev_config { u64 mc_err_reg; #define MC_ERR_REG_ECC_DB_ERR_L BIT(14) #define MC_ERR_REG_ECC_DB_ERR_U BIT(15) +#define MC_ERR_REG_MIRI_ECC_DB_ERR_0 BIT(18) +#define MC_ERR_REG_MIRI_ECC_DB_ERR_1 BIT(20) #define MC_ERR_REG_MIRI_CRI_ERR_0 BIT(22) #define MC_ERR_REG_MIRI_CRI_ERR_1 BIT(23) #define MC_ERR_REG_SM_ERR BIT(31) -#define MC_ERR_REG_ECC_ALL_SNG (BIT(6) | \ - BIT(7) | BIT(17) | BIT(19)) -#define MC_ERR_REG_ECC_ALL_DBL (BIT(14) | \ - BIT(15) | BIT(18) | BIT(20)) +#define MC_ERR_REG_ECC_ALL_SNG (BIT(2) | BIT(3) | BIT(4) | BIT(5) |\ + BIT(6) | BIT(7) | BIT(17) | BIT(19)) +#define MC_ERR_REG_ECC_ALL_DBL (BIT(10) | BIT(11) | BIT(12) |\ + BIT(13) | BIT(14) | BIT(15) |\ + BIT(18) | BIT(20)) u64 mc_err_mask; u64 mc_err_alarm; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 7ca78228b10..c829e6a2e8a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1,5 +1,5 @@ /************************************************************************ - * s2io.c: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -28,7 +28,7 @@ * explaination of all the variables. * rx_ring_num : This can be used to program the number of receive rings used * in the driver. - * rx_ring_len: This defines the number of descriptors each ring can have. This + * rx_ring_sz: This defines the number of descriptors each ring can have. This * is also an array of size 8. * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. * tx_fifo_len: This too is an array of 8. Each element defines the number of @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.3.1"; +static char s2io_driver_version[] = "Version 2.0.8.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -354,7 +354,7 @@ static int init_shared_mem(struct s2io_nic *nic) int lst_size, lst_per_page; struct net_device *dev = nic->dev; #ifdef CONFIG_2BUFF_MODE - u64 tmp; + unsigned long tmp; buffAdd_t *ba; #endif @@ -404,7 +404,7 @@ static int init_shared_mem(struct s2io_nic *nic) config->tx_cfg[i].fifo_len - 1; mac_control->fifos[i].fifo_no = i; mac_control->fifos[i].nic = nic; - mac_control->fifos[i].max_txds = MAX_SKB_FRAGS; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1; for (j = 0; j < page_num; j++) { int k = 0; @@ -418,6 +418,26 @@ static int init_shared_mem(struct s2io_nic *nic) DBG_PRINT(ERR_DBG, "failed for TxDL\n"); return -ENOMEM; } + /* If we got a zero DMA address(can happen on + * certain platforms like PPC), reallocate. + * Store virtual address of page we don't want, + * to be freed later. + */ + if (!tmp_p) { + mac_control->zerodma_virt_addr = tmp_v; + DBG_PRINT(INIT_DBG, + "%s: Zero DMA address for TxDL. ", dev->name); + DBG_PRINT(INIT_DBG, + "Virtual address %llx\n", (u64)tmp_v); + tmp_v = pci_alloc_consistent(nic->pdev, + PAGE_SIZE, &tmp_p); + if (!tmp_v) { + DBG_PRINT(ERR_DBG, + "pci_alloc_consistent "); + DBG_PRINT(ERR_DBG, "failed for TxDL\n"); + return -ENOMEM; + } + } while (k < lst_per_page) { int l = (j * lst_per_page) + k; if (l == config->tx_cfg[i].fifo_len) @@ -542,18 +562,18 @@ static int init_shared_mem(struct s2io_nic *nic) (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_0_org) return -ENOMEM; - tmp = (u64) ba->ba_0_org; + tmp = (unsigned long) ba->ba_0_org; tmp += ALIGN_SIZE; - tmp &= ~((u64) ALIGN_SIZE); + tmp &= ~((unsigned long) ALIGN_SIZE); ba->ba_0 = (void *) tmp; ba->ba_1_org = (void *) kmalloc (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_1_org) return -ENOMEM; - tmp = (u64) ba->ba_1_org; + tmp = (unsigned long) ba->ba_1_org; tmp += ALIGN_SIZE; - tmp &= ~((u64) ALIGN_SIZE); + tmp &= ~((unsigned long) ALIGN_SIZE); ba->ba_1 = (void *) tmp; k++; } @@ -600,7 +620,7 @@ static void free_shared_mem(struct s2io_nic *nic) mac_info_t *mac_control; struct config_param *config; int lst_size, lst_per_page; - + struct net_device *dev = nic->dev; if (!nic) return; @@ -616,9 +636,10 @@ static void free_shared_mem(struct s2io_nic *nic) lst_per_page); for (j = 0; j < page_num; j++) { int mem_blks = (j * lst_per_page); - if ((!mac_control->fifos[i].list_info) || - (!mac_control->fifos[i].list_info[mem_blks]. - list_virt_addr)) + if (!mac_control->fifos[i].list_info) + return; + if (!mac_control->fifos[i].list_info[mem_blks]. + list_virt_addr) break; pci_free_consistent(nic->pdev, PAGE_SIZE, mac_control->fifos[i]. @@ -628,6 +649,18 @@ static void free_shared_mem(struct s2io_nic *nic) list_info[mem_blks]. list_phy_addr); } + /* If we got a zero DMA address during allocation, + * free the page now + */ + if (mac_control->zerodma_virt_addr) { + pci_free_consistent(nic->pdev, PAGE_SIZE, + mac_control->zerodma_virt_addr, + (dma_addr_t)0); + DBG_PRINT(INIT_DBG, + "%s: Freeing TxDL with zero DMA addr. ", dev->name); + DBG_PRINT(INIT_DBG, "Virtual address %llx\n", + (u64)(mac_control->zerodma_virt_addr)); + } kfree(mac_control->fifos[i].list_info); } @@ -686,7 +719,7 @@ static void free_shared_mem(struct s2io_nic *nic) static int s2io_verify_pci_mode(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; register u64 val64 = 0; int mode; @@ -704,7 +737,7 @@ static int s2io_verify_pci_mode(nic_t *nic) */ static int s2io_print_pci_mode(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; register u64 val64 = 0; int mode; struct config_param *config = &nic->config; @@ -1403,7 +1436,7 @@ static int init_nic(struct s2io_nic *nic) writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7); /* Disable RMAC PAD STRIPPING */ - add = (void *) &bar0->mac_cfg; + add = &bar0->mac_cfg; val64 = readq(&bar0->mac_cfg); val64 &= ~(MAC_CFG_RMAC_STRIP_PAD); writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); @@ -1934,7 +1967,7 @@ static int start_nic(struct s2io_nic *nic) val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); + writeq(val64, (void __iomem *)bar0 + 0x2700); } /* @@ -2395,7 +2428,7 @@ static int s2io_poll(struct net_device *dev, int *budget) int pkt_cnt = 0, org_pkts_to_process; mac_info_t *mac_control; struct config_param *config; - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -2479,9 +2512,10 @@ static void rx_intr_handler(ring_info_t *ring_data) #endif spin_lock(&nic->rx_lock); if (atomic_read(&nic->card_state) == CARD_DOWN) { - DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n", + DBG_PRINT(INTR_DBG, "%s: %s going down for reset\n", __FUNCTION__, dev->name); spin_unlock(&nic->rx_lock); + return; } get_info = ring_data->rx_curr_get_info; @@ -2596,8 +2630,14 @@ static void tx_intr_handler(fifo_info_t *fifo_data) if (txdlp->Control_1 & TXD_T_CODE) { unsigned long long err; err = txdlp->Control_1 & TXD_T_CODE; - DBG_PRINT(ERR_DBG, "***TxD error %llx\n", - err); + if ((err >> 48) == 0xA) { + DBG_PRINT(TX_DBG, "TxD returned due \ + to loss of link\n"); + } + else { + DBG_PRINT(ERR_DBG, "***TxD error \ + %llx\n", err); + } } skb = (struct sk_buff *) ((unsigned long) @@ -2689,12 +2729,16 @@ static void alarm_intr_handler(struct s2io_nic *nic) if (val64 & MC_ERR_REG_ECC_ALL_DBL) { nic->mac_control.stats_info->sw_stat. double_ecc_errs++; - DBG_PRINT(ERR_DBG, "%s: Device indicates ", + DBG_PRINT(INIT_DBG, "%s: Device indicates ", dev->name); - DBG_PRINT(ERR_DBG, "double ECC error!!\n"); + DBG_PRINT(INIT_DBG, "double ECC error!!\n"); if (nic->device_type != XFRAME_II_DEVICE) { - netif_stop_queue(dev); - schedule_work(&nic->rst_timer_task); + /* Reset XframeI only if critical error */ + if (val64 & (MC_ERR_REG_MIRI_ECC_DB_ERR_0 | + MC_ERR_REG_MIRI_ECC_DB_ERR_1)) { + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } } } else { nic->mac_control.stats_info->sw_stat. @@ -2706,7 +2750,8 @@ static void alarm_intr_handler(struct s2io_nic *nic) val64 = readq(&bar0->serr_source); if (val64 & SERR_SOURCE_ANY) { DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name); - DBG_PRINT(ERR_DBG, "serious error!!\n"); + DBG_PRINT(ERR_DBG, "serious error %llx!!\n", + (unsigned long long)val64); netif_stop_queue(dev); schedule_work(&nic->rst_timer_task); } @@ -2831,7 +2876,7 @@ void s2io_reset(nic_t * sp) val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); + writeq(val64, (void __iomem *)bar0 + 0x2700); } /* @@ -3130,7 +3175,7 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; /* Avoid "put" pointer going beyond "get" pointer */ if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) { - DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n"); + DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); netif_stop_queue(dev); dev_kfree_skb(skb); spin_unlock_irqrestore(&sp->tx_lock, flags); @@ -3234,7 +3279,7 @@ s2io_alarm_handle(unsigned long data) static void s2io_txpic_intr_handle(nic_t *sp) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0; + XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; val64 = readq(&bar0->pic_int_status); @@ -3528,7 +3573,7 @@ static void s2io_set_multicast(struct net_device *dev) val64 = readq(&bar0->mac_cfg); sp->promisc_flg = 1; - DBG_PRINT(ERR_DBG, "%s: entered promiscuous mode\n", + DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", dev->name); } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) { /* Remove the NIC from promiscuous mode */ @@ -3543,7 +3588,7 @@ static void s2io_set_multicast(struct net_device *dev) val64 = readq(&bar0->mac_cfg); sp->promisc_flg = 0; - DBG_PRINT(ERR_DBG, "%s: left promiscuous mode\n", + DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); } @@ -5325,7 +5370,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) break; } } - config->max_txds = MAX_SKB_FRAGS; + config->max_txds = MAX_SKB_FRAGS + 1; /* Rx side parameters. */ if (rx_ring_sz[0] == 0) @@ -5525,9 +5570,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (sp->device_type & XFRAME_II_DEVICE) { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + DBG_PRINT(ERR_DBG, "(rev %d), %s", get_xena_rev_id(sp->pdev), s2io_driver_version); +#ifdef CONFIG_2BUFF_MODE + DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); +#endif + + DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], sp->def_mac_addr[0].mac_addr[1], @@ -5544,9 +5594,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } else { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + DBG_PRINT(ERR_DBG, "(rev %d), %s", get_xena_rev_id(sp->pdev), s2io_driver_version); +#ifdef CONFIG_2BUFF_MODE + DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); +#endif + DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], sp->def_mac_addr[0].mac_addr[1], diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index bc64d967f08..89151cb5218 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -1,5 +1,5 @@ /************************************************************************ - * s2io.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC + * s2io.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of @@ -622,6 +622,9 @@ typedef struct mac_info { /* Fifo specific structure */ fifo_info_t fifos[MAX_TX_FIFOS]; + /* Save virtual address of TxD page with zero DMA addr(if any) */ + void *zerodma_virt_addr; + /* rx side stuff */ /* Ring specific structure */ ring_info_t rings[MAX_RX_RINGS]; diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c new file mode 100644 index 00000000000..92f75529eff --- /dev/null +++ b/drivers/net/sis190.c @@ -0,0 +1,1884 @@ +/* + sis190.c: Silicon Integrated Systems SiS190 ethernet driver + + Copyright (c) 2003 K.M. Liu <kmliu@sis.com> + Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com> + Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com> + + Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 + genuine driver. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/netdevice.h> +#include <linux/rtnetlink.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/mii.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <asm/irq.h> + +#define net_drv(p, arg...) if (netif_msg_drv(p)) \ + printk(arg) +#define net_probe(p, arg...) if (netif_msg_probe(p)) \ + printk(arg) +#define net_link(p, arg...) if (netif_msg_link(p)) \ + printk(arg) +#define net_intr(p, arg...) if (netif_msg_intr(p)) \ + printk(arg) +#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ + printk(arg) + +#define PHY_MAX_ADDR 32 +#define PHY_ID_ANY 0x1f +#define MII_REG_ANY 0x1f + +#ifdef CONFIG_SIS190_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define DRV_VERSION "1.2" NAPI_SUFFIX +#define DRV_NAME "sis190" +#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION +#define PFX DRV_NAME ": " + +#ifdef CONFIG_SIS190_NAPI +#define sis190_rx_skb netif_receive_skb +#define sis190_rx_quota(count, quota) min(count, quota) +#else +#define sis190_rx_skb netif_rx +#define sis190_rx_quota(count, quota) count +#endif + +#define MAC_ADDR_LEN 6 + +#define NUM_TX_DESC 64 /* [8..1024] */ +#define NUM_RX_DESC 64 /* [8..8192] */ +#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) +#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) +#define RX_BUF_SIZE 1536 +#define RX_BUF_MASK 0xfff8 + +#define SIS190_REGS_SIZE 0x80 +#define SIS190_TX_TIMEOUT (6*HZ) +#define SIS190_PHY_TIMEOUT (10*HZ) +#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + +/* Enhanced PHY access register bit definitions */ +#define EhnMIIread 0x0000 +#define EhnMIIwrite 0x0020 +#define EhnMIIdataShift 16 +#define EhnMIIpmdShift 6 /* 7016 only */ +#define EhnMIIregShift 11 +#define EhnMIIreq 0x0010 +#define EhnMIInotDone 0x0010 + +/* Write/read MMIO register */ +#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) +#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) +#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) +#define SIS_R8(reg) readb (ioaddr + (reg)) +#define SIS_R16(reg) readw (ioaddr + (reg)) +#define SIS_R32(reg) readl (ioaddr + (reg)) + +#define SIS_PCI_COMMIT() SIS_R32(IntrControl) + +enum sis190_registers { + TxControl = 0x00, + TxDescStartAddr = 0x04, + rsv0 = 0x08, // reserved + TxSts = 0x0c, // unused (Control/Status) + RxControl = 0x10, + RxDescStartAddr = 0x14, + rsv1 = 0x18, // reserved + RxSts = 0x1c, // unused + IntrStatus = 0x20, + IntrMask = 0x24, + IntrControl = 0x28, + IntrTimer = 0x2c, // unused (Interupt Timer) + PMControl = 0x30, // unused (Power Mgmt Control/Status) + rsv2 = 0x34, // reserved + ROMControl = 0x38, + ROMInterface = 0x3c, + StationControl = 0x40, + GMIIControl = 0x44, + GIoCR = 0x48, // unused (GMAC IO Compensation) + GIoCtrl = 0x4c, // unused (GMAC IO Control) + TxMacControl = 0x50, + TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) + RGDelay = 0x58, // unused (RGMII Tx Internal Delay) + rsv3 = 0x5c, // reserved + RxMacControl = 0x60, + RxMacAddr = 0x62, + RxHashTable = 0x68, + // Undocumented = 0x6c, + RxWolCtrl = 0x70, + RxWolData = 0x74, // unused (Rx WOL Data Access) + RxMPSControl = 0x78, // unused (Rx MPS Control) + rsv4 = 0x7c, // reserved +}; + +enum sis190_register_content { + /* IntrStatus */ + SoftInt = 0x40000000, // unused + Timeup = 0x20000000, // unused + PauseFrame = 0x00080000, // unused + MagicPacket = 0x00040000, // unused + WakeupFrame = 0x00020000, // unused + LinkChange = 0x00010000, + RxQEmpty = 0x00000080, + RxQInt = 0x00000040, + TxQ1Empty = 0x00000020, // unused + TxQ1Int = 0x00000010, + TxQ0Empty = 0x00000008, // unused + TxQ0Int = 0x00000004, + RxHalt = 0x00000002, + TxHalt = 0x00000001, + + /* {Rx/Tx}CmdBits */ + CmdReset = 0x10, + CmdRxEnb = 0x08, // unused + CmdTxEnb = 0x01, + RxBufEmpty = 0x01, // unused + + /* Cfg9346Bits */ + Cfg9346_Lock = 0x00, // unused + Cfg9346_Unlock = 0xc0, // unused + + /* RxMacControl */ + AcceptErr = 0x20, // unused + AcceptRunt = 0x10, // unused + AcceptBroadcast = 0x0800, + AcceptMulticast = 0x0400, + AcceptMyPhys = 0x0200, + AcceptAllPhys = 0x0100, + + /* RxConfigBits */ + RxCfgFIFOShift = 13, + RxCfgDMAShift = 8, // 0x1a in RxControl ? + + /* TxConfigBits */ + TxInterFrameGapShift = 24, + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + LinkStatus = 0x02, // unused + FullDup = 0x01, // unused + + /* TBICSRBit */ + TBILinkOK = 0x02000000, // unused +}; + +struct TxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +struct RxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +enum _DescStatusBit { + /* _Desc.status */ + OWNbit = 0x80000000, // RXOWN/TXOWN + INTbit = 0x40000000, // RXINT/TXINT + CRCbit = 0x00020000, // CRCOFF/CRCEN + PADbit = 0x00010000, // PREADD/PADEN + /* _Desc.size */ + RingEnd = 0x80000000, + /* TxDesc.status */ + LSEN = 0x08000000, // TSO ? -- FR + IPCS = 0x04000000, + TCPCS = 0x02000000, + UDPCS = 0x01000000, + BSTEN = 0x00800000, + EXTEN = 0x00400000, + DEFEN = 0x00200000, + BKFEN = 0x00100000, + CRSEN = 0x00080000, + COLEN = 0x00040000, + THOL3 = 0x30000000, + THOL2 = 0x20000000, + THOL1 = 0x10000000, + THOL0 = 0x00000000, + /* RxDesc.status */ + IPON = 0x20000000, + TCPON = 0x10000000, + UDPON = 0x08000000, + Wakup = 0x00400000, + Magic = 0x00200000, + Pause = 0x00100000, + DEFbit = 0x00200000, + BCAST = 0x000c0000, + MCAST = 0x00080000, + UCAST = 0x00040000, + /* RxDesc.PSize */ + TAGON = 0x80000000, + RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR + ABORT = 0x00800000, + SHORT = 0x00400000, + LIMIT = 0x00200000, + MIIER = 0x00100000, + OVRUN = 0x00080000, + NIBON = 0x00040000, + COLON = 0x00020000, + CRCOK = 0x00010000, + RxSizeMask = 0x0000ffff + /* + * The asic could apparently do vlan, TSO, jumbo (sis191 only) and + * provide two (unused with Linux) Tx queues. No publically + * available documentation alas. + */ +}; + +enum sis190_eeprom_access_register_bits { + EECS = 0x00000001, // unused + EECLK = 0x00000002, // unused + EEDO = 0x00000008, // unused + EEDI = 0x00000004, // unused + EEREQ = 0x00000080, + EEROP = 0x00000200, + EEWOP = 0x00000100 // unused +}; + +/* EEPROM Addresses */ +enum sis190_eeprom_address { + EEPROMSignature = 0x00, + EEPROMCLK = 0x01, // unused + EEPROMInfo = 0x02, + EEPROMMACAddr = 0x03 +}; + +enum sis190_feature { + F_HAS_RGMII = 1, + F_PHY_88E1111 = 2, + F_PHY_BCM5461 = 4 +}; + +struct sis190_private { + void __iomem *mmio_addr; + struct pci_dev *pci_dev; + struct net_device_stats stats; + spinlock_t lock; + u32 rx_buf_sz; + u32 cur_rx; + u32 cur_tx; + u32 dirty_rx; + u32 dirty_tx; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + struct RxDesc *RxDescRing; + struct TxDesc *TxDescRing; + struct sk_buff *Rx_skbuff[NUM_RX_DESC]; + struct sk_buff *Tx_skbuff[NUM_TX_DESC]; + struct work_struct phy_task; + struct timer_list timer; + u32 msg_enable; + struct mii_if_info mii_if; + struct list_head first_phy; + u32 features; +}; + +struct sis190_phy { + struct list_head list; + int phy_id; + u16 id[2]; + u16 status; + u8 type; +}; + +enum sis190_phy_type { + UNKNOWN = 0x00, + HOME = 0x01, + LAN = 0x02, + MIX = 0x03 +}; + +static struct mii_chip_info { + const char *name; + u16 id[2]; + unsigned int type; + u32 feature; +} mii_chip_table[] = { + { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 }, + { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN, 0 }, + { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 }, + { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN, 0 }, + { NULL, } +}; + +const static struct { + const char *name; +} sis_chip_info[] = { + { "SiS 190 PCI Fast Ethernet adapter" }, + { "SiS 191 PCI Gigabit Ethernet adapter" }, +}; + +static struct pci_device_id sis190_pci_tbl[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); + +static int rx_copybreak = 200; + +static struct { + u32 msg_enable; +} debug = { -1 }; + +MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver"); +module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); +MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static const u32 sis190_intr_mask = + RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt | LinkChange; + +/* + * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The chips use a 64 element hash table based on the Ethernet CRC. + */ +static int multicast_filter_limit = 32; + +static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) +{ + unsigned int i; + + SIS_W32(GMIIControl, ctl); + + msleep(1); + + for (i = 0; i < 100; i++) { + if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) + break; + msleep(1); + } + + if (i > 999) + printk(KERN_ERR PFX "PHY command failed !\n"); +} + +static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | + (((u32) val) << EhnMIIdataShift)); +} + +static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); + + return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); +} + +static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) +{ + struct sis190_private *tp = netdev_priv(dev); + + mdio_write(tp->mmio_addr, phy_id, reg, val); +} + +static int __mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mdio_read(tp->mmio_addr, phy_id, reg); +} + +static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) +{ + mdio_read(ioaddr, phy_id, reg); + return mdio_read(ioaddr, phy_id, reg); +} + +static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +{ + u16 data = 0xffff; + unsigned int i; + + if (!(SIS_R32(ROMControl) & 0x0002)) + return 0; + + SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); + + for (i = 0; i < 200; i++) { + if (!(SIS_R32(ROMInterface) & EEREQ)) { + data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; + break; + } + msleep(1); + } + + return data; +} + +static void sis190_irq_mask_and_ack(void __iomem *ioaddr) +{ + SIS_W32(IntrMask, 0x00); + SIS_W32(IntrStatus, 0xffffffff); + SIS_PCI_COMMIT(); +} + +static void sis190_asic_down(void __iomem *ioaddr) +{ + /* Stop the chip's Tx and Rx DMA processes. */ + + SIS_W32(TxControl, 0x1a00); + SIS_W32(RxControl, 0x1a00); + + sis190_irq_mask_and_ack(ioaddr); +} + +static void sis190_mark_as_last_descriptor(struct RxDesc *desc) +{ + desc->size |= cpu_to_le32(RingEnd); +} + +static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) +{ + u32 eor = le32_to_cpu(desc->size) & RingEnd; + + desc->PSize = 0x0; + desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); + wmb(); + desc->status = cpu_to_le32(OWNbit | INTbit); +} + +static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, + u32 rx_buf_sz) +{ + desc->addr = cpu_to_le32(mapping); + sis190_give_to_asic(desc, rx_buf_sz); +} + +static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) +{ + desc->PSize = 0x0; + desc->addr = 0xdeadbeef; + desc->size &= cpu_to_le32(RingEnd); + wmb(); + desc->status = 0x0; +} + +static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff, + struct RxDesc *desc, u32 rx_buf_sz) +{ + struct sk_buff *skb; + dma_addr_t mapping; + int ret = 0; + + skb = dev_alloc_skb(rx_buf_sz); + if (!skb) + goto err_out; + + *sk_buff = skb; + + mapping = pci_map_single(pdev, skb->data, rx_buf_sz, + PCI_DMA_FROMDEVICE); + + sis190_map_to_asic(desc, mapping, rx_buf_sz); +out: + return ret; + +err_out: + ret = -ENOMEM; + sis190_make_unusable_by_asic(desc); + goto out; +} + +static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, + u32 start, u32 end) +{ + u32 cur; + + for (cur = start; cur < end; cur++) { + int ret, i = cur % NUM_RX_DESC; + + if (tp->Rx_skbuff[i]) + continue; + + ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i, + tp->RxDescRing + i, tp->rx_buf_sz); + if (ret < 0) + break; + } + return cur - start; +} + +static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, + struct RxDesc *desc, int rx_buf_sz) +{ + int ret = -1; + + if (pkt_size < rx_copybreak) { + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN); + if (skb) { + skb_reserve(skb, NET_IP_ALIGN); + eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0); + *sk_buff = skb; + sis190_give_to_asic(desc, rx_buf_sz); + ret = 0; + } + } + return ret; +} + +static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) + + if ((status & CRCOK) && !(status & ErrMask)) + return 0; + + if (!(status & CRCOK)) + stats->rx_crc_errors++; + else if (status & OVRUN) + stats->rx_over_errors++; + else if (status & (SHORT | LIMIT)) + stats->rx_length_errors++; + else if (status & (MIIER | NIBON | COLON)) + stats->rx_frame_errors++; + + stats->rx_errors++; + return -1; +} + +static int sis190_rx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &tp->stats; + u32 rx_left, cur_rx = tp->cur_rx; + u32 delta, count; + + rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; + rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); + + for (; rx_left > 0; rx_left--, cur_rx++) { + unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescRing + entry; + u32 status; + + if (desc->status & OWNbit) + break; + + status = le32_to_cpu(desc->PSize); + + // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, + // status); + + if (sis190_rx_pkt_err(status, stats) < 0) + sis190_give_to_asic(desc, tp->rx_buf_sz); + else { + struct sk_buff *skb = tp->Rx_skbuff[entry]; + int pkt_size = (status & RxSizeMask) - 4; + void (*pci_action)(struct pci_dev *, dma_addr_t, + size_t, int) = pci_dma_sync_single_for_device; + + if (unlikely(pkt_size > tp->rx_buf_sz)) { + net_intr(tp, KERN_INFO + "%s: (frag) status = %08x.\n", + dev->name, status); + stats->rx_dropped++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + continue; + } + + pci_dma_sync_single_for_cpu(tp->pci_dev, + le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + if (sis190_try_rx_copy(&skb, pkt_size, desc, + tp->rx_buf_sz)) { + pci_action = pci_unmap_single; + tp->Rx_skbuff[entry] = NULL; + sis190_make_unusable_by_asic(desc); + } + + pci_action(tp->pci_dev, le32_to_cpu(desc->addr), + tp->rx_buf_sz, PCI_DMA_FROMDEVICE); + + skb->dev = dev; + skb_put(skb, pkt_size); + skb->protocol = eth_type_trans(skb, dev); + + sis190_rx_skb(skb); + + dev->last_rx = jiffies; + stats->rx_packets++; + stats->rx_bytes += pkt_size; + if ((status & BCAST) == MCAST) + stats->multicast++; + } + } + count = cur_rx - tp->cur_rx; + tp->cur_rx = cur_rx; + + delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); + if (!delta && count && netif_msg_intr(tp)) + printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name); + tp->dirty_rx += delta; + + if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp)) + printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name); + + return count; +} + +static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, + struct TxDesc *desc) +{ + unsigned int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); + + memset(desc, 0x00, sizeof(*desc)); +} + +static void sis190_tx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + u32 pending, dirty_tx = tp->dirty_tx; + /* + * It would not be needed if queueing was allowed to be enabled + * again too early (hint: think preempt and unclocked smp systems). + */ + unsigned int queue_stopped; + + smp_rmb(); + pending = tp->cur_tx - dirty_tx; + queue_stopped = (pending == NUM_TX_DESC); + + for (; pending; pending--, dirty_tx++) { + unsigned int entry = dirty_tx % NUM_TX_DESC; + struct TxDesc *txd = tp->TxDescRing + entry; + struct sk_buff *skb; + + if (le32_to_cpu(txd->status) & OWNbit) + break; + + skb = tp->Tx_skbuff[entry]; + + tp->stats.tx_packets++; + tp->stats.tx_bytes += skb->len; + + sis190_unmap_tx_skb(tp->pci_dev, skb, txd); + tp->Tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + } + + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + smp_wmb(); + if (queue_stopped) + netif_wake_queue(dev); + } +} + +/* + * The interrupt handler does all of the Rx thread work and cleans up after + * the Tx thread. + */ +static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs) +{ + struct net_device *dev = __dev; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int handled = 0; + u32 status; + + status = SIS_R32(IntrStatus); + + if ((status == 0xffffffff) || !status) + goto out; + + handled = 1; + + if (unlikely(!netif_running(dev))) { + sis190_asic_down(ioaddr); + goto out; + } + + SIS_W32(IntrStatus, status); + + // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status); + + if (status & LinkChange) { + net_intr(tp, KERN_INFO "%s: link change.\n", dev->name); + schedule_work(&tp->phy_task); + } + + if (status & RxQInt) + sis190_rx_interrupt(dev, tp, ioaddr); + + if (status & TxQ0Int) + sis190_tx_interrupt(dev, tp, ioaddr); +out: + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis190_netpoll(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + disable_irq(pdev->irq); + sis190_interrupt(pdev->irq, dev, NULL); + enable_irq(pdev->irq); +} +#endif + +static void sis190_free_rx_skb(struct sis190_private *tp, + struct sk_buff **sk_buff, struct RxDesc *desc) +{ + struct pci_dev *pdev = tp->pci_dev; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(*sk_buff); + *sk_buff = NULL; + sis190_make_unusable_by_asic(desc); +} + +static void sis190_rx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + if (!tp->Rx_skbuff[i]) + continue; + sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); + } +} + +static void sis190_init_ring_indexes(struct sis190_private *tp) +{ + tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; +} + +static int sis190_init_ring(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_init_ring_indexes(tp); + + memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); + memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); + + if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) + goto err_rx_clear; + + sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); + + return 0; + +err_rx_clear: + sis190_rx_clear(tp); + return -ENOMEM; +} + +static void sis190_set_rx_mode(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + u32 mc_filter[2]; /* Multicast hash filter */ + u16 rx_mode; + + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((dev->mc_count > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct dev_mc_list *mclist; + unsigned int i; + + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + spin_lock_irqsave(&tp->lock, flags); + + SIS_W16(RxMacControl, rx_mode | 0x2); + SIS_W32(RxHashTable, mc_filter[0]); + SIS_W32(RxHashTable + 4, mc_filter[1]); + + spin_unlock_irqrestore(&tp->lock, flags); +} + +static void sis190_soft_reset(void __iomem *ioaddr) +{ + SIS_W32(IntrControl, 0x8000); + SIS_PCI_COMMIT(); + msleep(1); + SIS_W32(IntrControl, 0x0); + sis190_asic_down(ioaddr); + msleep(1); +} + +static void sis190_hw_start(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + sis190_soft_reset(ioaddr); + + SIS_W32(TxDescStartAddr, tp->tx_dma); + SIS_W32(RxDescStartAddr, tp->rx_dma); + + SIS_W32(IntrStatus, 0xffffffff); + SIS_W32(IntrMask, 0x0); + SIS_W32(GMIIControl, 0x0); + SIS_W32(TxMacControl, 0x60); + SIS_W16(RxMacControl, 0x02); + SIS_W32(RxHashTable, 0x0); + SIS_W32(0x6c, 0x0); + SIS_W32(RxWolCtrl, 0x0); + SIS_W32(RxWolData, 0x0); + + SIS_PCI_COMMIT(); + + sis190_set_rx_mode(dev); + + /* Enable all known interrupts by setting the interrupt mask. */ + SIS_W32(IntrMask, sis190_intr_mask); + + SIS_W32(TxControl, 0x1a00 | CmdTxEnb); + SIS_W32(RxControl, 0x1a1d); + + netif_start_queue(dev); +} + +static void sis190_phy_task(void * data) +{ + struct net_device *dev = data; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + u16 val; + + rtnl_lock(); + + val = mdio_read(ioaddr, phy_id, MII_BMCR); + if (val & BMCR_RESET) { + // FIXME: needlessly high ? -- FR 02/07/2005 + mod_timer(&tp->timer, jiffies + HZ/10); + } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) & + BMSR_ANEGCOMPLETE)) { + net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", + dev->name); + netif_carrier_off(dev); + mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); + mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); + } else { + /* Rejoice ! */ + struct { + int val; + u32 ctl; + const char *msg; + } reg31[] = { + { LPA_1000XFULL | LPA_SLCT, 0x07000c00 | 0x00001000, + "1000 Mbps Full Duplex" }, + { LPA_1000XHALF | LPA_SLCT, 0x07000c00, + "1000 Mbps Half Duplex" }, + { LPA_100FULL, 0x04000800 | 0x00001000, + "100 Mbps Full Duplex" }, + { LPA_100HALF, 0x04000800, + "100 Mbps Half Duplex" }, + { LPA_10FULL, 0x04000400 | 0x00001000, + "10 Mbps Full Duplex" }, + { LPA_10HALF, 0x04000400, + "10 Mbps Half Duplex" }, + { 0, 0x04000400, "unknown" } + }, *p; + u16 adv; + + val = mdio_read(ioaddr, phy_id, 0x1f); + net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); + + val = mdio_read(ioaddr, phy_id, MII_LPA); + adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n", + dev->name, val, adv); + + val &= adv; + + for (p = reg31; p->val; p++) { + if ((val & p->val) == p->val) + break; + } + + p->ctl |= SIS_R32(StationControl) & ~0x0f001c00; + + if ((tp->features & F_HAS_RGMII) && + (tp->features & F_PHY_BCM5461)) { + // Set Tx Delay in RGMII mode. + mdio_write(ioaddr, phy_id, 0x18, 0xf1c7); + udelay(200); + mdio_write(ioaddr, phy_id, 0x1c, 0x8c00); + p->ctl |= 0x03000000; + } + + SIS_W32(StationControl, p->ctl); + + if (tp->features & F_HAS_RGMII) { + SIS_W32(RGDelay, 0x0441); + SIS_W32(RGDelay, 0x0440); + } + + net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name, + p->msg); + netif_carrier_on(dev); + } + + rtnl_unlock(); +} + +static void sis190_phy_timer(unsigned long __opaque) +{ + struct net_device *dev = (struct net_device *)__opaque; + struct sis190_private *tp = netdev_priv(dev); + + if (likely(netif_running(dev))) + schedule_work(&tp->phy_task); +} + +static inline void sis190_delete_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + del_timer_sync(&tp->timer); +} + +static inline void sis190_request_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct timer_list *timer = &tp->timer; + + init_timer(timer); + timer->expires = jiffies + SIS190_PHY_TIMEOUT; + timer->data = (unsigned long)dev; + timer->function = sis190_phy_timer; + add_timer(timer); +} + +static void sis190_set_rxbufsize(struct sis190_private *tp, + struct net_device *dev) +{ + unsigned int mtu = dev->mtu; + + tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + /* RxDesc->size has a licence to kill the lower bits */ + if (tp->rx_buf_sz & 0x07) { + tp->rx_buf_sz += 8; + tp->rx_buf_sz &= RX_BUF_MASK; + } +} + +static int sis190_open(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + int rc = -ENOMEM; + + sis190_set_rxbufsize(tp, dev); + + /* + * Rx and Tx descriptors need 256 bytes alignment. + * pci_alloc_consistent() guarantees a stronger alignment. + */ + tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); + if (!tp->TxDescRing) + goto out; + + tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); + if (!tp->RxDescRing) + goto err_free_tx_0; + + rc = sis190_init_ring(dev); + if (rc < 0) + goto err_free_rx_1; + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + sis190_request_timer(dev); + + rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev); + if (rc < 0) + goto err_release_timer_2; + + sis190_hw_start(dev); +out: + return rc; + +err_release_timer_2: + sis190_delete_timer(dev); + sis190_rx_clear(tp); +err_free_rx_1: + pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, + tp->rx_dma); +err_free_tx_0: + pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, + tp->tx_dma); + goto out; +} + +static void sis190_tx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = tp->Tx_skbuff[i]; + + if (!skb) + continue; + + sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); + tp->Tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + + tp->stats.tx_dropped++; + } + tp->cur_tx = tp->dirty_tx = 0; +} + +static void sis190_down(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int poll_locked = 0; + + sis190_delete_timer(dev); + + netif_stop_queue(dev); + + flush_scheduled_work(); + + do { + spin_lock_irq(&tp->lock); + + sis190_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + + synchronize_irq(dev->irq); + + if (!poll_locked) { + netif_poll_disable(dev); + poll_locked++; + } + + synchronize_sched(); + + } while (SIS_R32(IntrMask)); + + sis190_tx_clear(tp); + sis190_rx_clear(tp); +} + +static int sis190_close(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + sis190_down(dev); + + free_irq(dev->irq, dev); + + netif_poll_enable(dev); + + pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); + pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); + + tp->TxDescRing = NULL; + tp->RxDescRing = NULL; + + return 0; +} + +static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 len, entry, dirty_tx; + struct TxDesc *desc; + dma_addr_t mapping; + + if (unlikely(skb->len < ETH_ZLEN)) { + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) { + tp->stats.tx_dropped++; + goto out; + } + len = ETH_ZLEN; + } else { + len = skb->len; + } + + entry = tp->cur_tx % NUM_TX_DESC; + desc = tp->TxDescRing + entry; + + if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { + netif_stop_queue(dev); + net_tx_err(tp, KERN_ERR PFX + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + tp->Tx_skbuff[entry] = skb; + + desc->PSize = cpu_to_le32(len); + desc->addr = cpu_to_le32(mapping); + + desc->size = cpu_to_le32(len); + if (entry == (NUM_TX_DESC - 1)) + desc->size |= cpu_to_le32(RingEnd); + + wmb(); + + desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); + + tp->cur_tx++; + + smp_wmb(); + + SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); + + dev->trans_start = jiffies; + + dirty_tx = tp->dirty_tx; + if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { + netif_stop_queue(dev); + smp_rmb(); + if (dirty_tx != tp->dirty_tx) + netif_wake_queue(dev); + } +out: + return NETDEV_TX_OK; +} + +static struct net_device_stats *sis190_get_stats(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return &tp->stats; +} + +static void sis190_free_phy(struct list_head *first_phy) +{ + struct sis190_phy *cur, *next; + + list_for_each_entry_safe(cur, next, first_phy, list) { + kfree(cur); + } +} + +/** + * sis190_default_phy - Select default PHY for sis190 mac. + * @dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ +static u16 sis190_default_phy(struct net_device *dev) +{ + struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + phy_home = phy_default = phy_lan = NULL; + + list_for_each_entry(phy, &tp->first_phy, list) { + status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); + + // Link ON & Not select default PHY & not ghost PHY. + if ((status & BMSR_LSTATUS) && + !phy_default && + (phy->type != UNKNOWN)) { + phy_default = phy; + } else { + status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); + mdio_write(ioaddr, phy->phy_id, MII_BMCR, + status | BMCR_ANENABLE | BMCR_ISOLATE); + if (phy->type == HOME) + phy_home = phy; + else if (phy->type == LAN) + phy_lan = phy; + } + } + + if (!phy_default) { + if (phy_home) + phy_default = phy_home; + else if (phy_lan) + phy_default = phy_lan; + else + phy_default = list_entry(&tp->first_phy, + struct sis190_phy, list); + } + + if (mii_if->phy_id != phy_default->phy_id) { + mii_if->phy_id = phy_default->phy_id; + net_probe(tp, KERN_INFO + "%s: Using transceiver at address %d as default.\n", + pci_name(tp->pci_dev), mii_if->phy_id); + } + + status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); + status &= (~BMCR_ISOLATE); + + mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); + status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); + + return status; +} + +static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, + struct sis190_phy *phy, unsigned int phy_id, + u16 mii_status) +{ + void __iomem *ioaddr = tp->mmio_addr; + struct mii_chip_info *p; + + INIT_LIST_HEAD(&phy->list); + phy->status = mii_status; + phy->phy_id = phy_id; + + phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); + phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); + + for (p = mii_chip_table; p->type; p++) { + if ((p->id[0] == phy->id[0]) && + (p->id[1] == (phy->id[1] & 0xfff0))) { + break; + } + } + + if (p->id[1]) { + phy->type = (p->type == MIX) ? + ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? + LAN : HOME) : p->type; + tp->features |= p->feature; + } else + phy->type = UNKNOWN; + + net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", + pci_name(tp->pci_dev), + (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id); +} + +static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp) +{ + if (tp->features & F_PHY_88E1111) { + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + u16 reg[2][2] = { + { 0x808b, 0x0ce1 }, + { 0x808f, 0x0c60 } + }, *p; + + p = (tp->features & F_HAS_RGMII) ? reg[0] : reg[1]; + + mdio_write(ioaddr, phy_id, 0x1b, p[0]); + udelay(200); + mdio_write(ioaddr, phy_id, 0x14, p[1]); + udelay(200); + } +} + +/** + * sis190_mii_probe - Probe MII PHY for sis190 + * @dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ +static int __devinit sis190_mii_probe(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id; + int rc = 0; + + INIT_LIST_HEAD(&tp->first_phy); + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + struct sis190_phy *phy; + u16 status; + + status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + + // Try next mii if the current one is not accessible. + if (status == 0xffff || status == 0x0000) + continue; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + sis190_free_phy(&tp->first_phy); + rc = -ENOMEM; + goto out; + } + + sis190_init_phy(dev, tp, phy, phy_id, status); + + list_add(&tp->first_phy, &phy->list); + } + + if (list_empty(&tp->first_phy)) { + net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", + pci_name(tp->pci_dev)); + rc = -EIO; + goto out; + } + + /* Select default PHY for mac */ + sis190_default_phy(dev); + + sis190_mii_probe_88e1111_fixup(tp); + + mii_if->dev = dev; + mii_if->mdio_read = __mdio_read; + mii_if->mdio_write = __mdio_write; + mii_if->phy_id_mask = PHY_ID_ANY; + mii_if->reg_num_mask = MII_REG_ANY; +out: + return rc; +} + +static void __devexit sis190_mii_remove(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_free_phy(&tp->first_phy); +} + +static void sis190_release_board(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + iounmap(tp->mmio_addr); + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(dev); +} + +static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) +{ + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + dev = alloc_etherdev(sizeof(*tp)); + if (!dev) { + net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n"); + rc = -ENOMEM; + goto err_out_0; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); + + rc = pci_enable_device(pdev); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev)); + goto err_free_dev_1; + } + + rc = -ENODEV; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { + net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n", + pci_name(pdev)); + goto err_free_res_3; + } + + pci_set_master(pdev); + + ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); + if (!ioaddr) { + net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n", + pci_name(pdev)); + rc = -EIO; + goto err_free_res_3; + } + + tp->pci_dev = pdev; + tp->mmio_addr = ioaddr; + + sis190_irq_mask_and_ack(ioaddr); + + sis190_soft_reset(ioaddr); +out: + return dev; + +err_free_res_3: + pci_release_regions(pdev); +err_pci_disable_2: + pci_disable_device(pdev); +err_free_dev_1: + free_netdev(dev); +err_out_0: + dev = ERR_PTR(rc); + goto out; +} + +static void sis190_tx_timeout(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 tmp8; + + /* Disable Tx, if not already */ + tmp8 = SIS_R8(TxControl); + if (tmp8 & CmdTxEnb) + SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + + net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n", + dev->name, SIS_R32(TxControl), SIS_R32(TxSts)); + + /* Disable interrupts by clearing the interrupt mask. */ + SIS_W32(IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + sis190_tx_clear(tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything. */ + sis190_hw_start(dev); + + netif_wake_queue(dev); +} + +static void sis190_set_rgmii(struct sis190_private *tp, u8 reg) +{ + tp->features |= (reg & 0x80) ? F_HAS_RGMII : 0; +} + +static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 sig; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n", + pci_name(pdev)); + + /* Check to see if there is a sane EEPROM */ + sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); + + if ((sig == 0xffff) || (sig == 0x0000)) { + net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n", + pci_name(pdev), sig); + return -EIO; + } + + /* Get MAC address from EEPROM */ + for (i = 0; i < MAC_ADDR_LEN / 2; i++) { + __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + + ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); + } + + sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo)); + + return 0; +} + +/** + * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model + * @pdev: PCI device + * @dev: network device to get address for + * + * SiS965 model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ +static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *isa_bridge; + u8 reg, tmp8; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n", + pci_name(pdev)); + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL); + if (!isa_bridge) { + net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n", + pci_name(pdev)); + return -EIO; + } + + /* Enable port 78h & 79h to access APC Registers. */ + pci_read_config_byte(isa_bridge, 0x48, &tmp8); + reg = (tmp8 & ~0x02); + pci_write_config_byte(isa_bridge, 0x48, reg); + udelay(50); + pci_read_config_byte(isa_bridge, 0x48, ®); + + for (i = 0; i < MAC_ADDR_LEN; i++) { + outb(0x9 + i, 0x78); + dev->dev_addr[i] = inb(0x79); + } + + outb(0x12, 0x78); + reg = inb(0x79); + + sis190_set_rgmii(tp, reg); + + /* Restore the value to ISA Bridge */ + pci_write_config_byte(isa_bridge, 0x48, tmp8); + pci_dev_put(isa_bridge); + + return 0; +} + +/** + * sis190_init_rxfilter - Initialize the Rx filter + * @dev: network device to initialize + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ +static inline void sis190_init_rxfilter(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 ctl; + int i; + + ctl = SIS_R16(RxMacControl); + /* + * Disable packet filtering before setting filter. + * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits + * only and followed by RxMacAddr (6 bytes). Strange. -- FR + */ + SIS_W16(RxMacControl, ctl & ~0x0f00); + + for (i = 0; i < MAC_ADDR_LEN; i++) + SIS_W8(RxMacAddr + i, dev->dev_addr[i]); + + SIS_W16(RxMacControl, ctl); + SIS_PCI_COMMIT(); +} + +static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) +{ + u8 from; + + pci_read_config_byte(pdev, 0x73, &from); + + return (from & 0x00000001) ? + sis190_get_mac_addr_from_apc(pdev, dev) : + sis190_get_mac_addr_from_eeprom(pdev, dev); +} + +static void sis190_set_speed_auto(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + int val; + + net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); + + val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + + // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 + // unchanged. + mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF); + + // Enable 1000 Full Mode. + mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); + + // Enable auto-negotiation and restart auto-negotiation. + mdio_write(ioaddr, phy_id, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); +} + +static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_gset(&tp->mii_if, cmd); +} + +static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_sset(&tp->mii_if, cmd); +} + +static void sis190_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sis190_private *tp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(tp->pci_dev)); +} + +static int sis190_get_regs_len(struct net_device *dev) +{ + return SIS190_REGS_SIZE; +} + +static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct sis190_private *tp = netdev_priv(dev); + unsigned long flags; + + if (regs->len > SIS190_REGS_SIZE) + regs->len = SIS190_REGS_SIZE; + + spin_lock_irqsave(&tp->lock, flags); + memcpy_fromio(p, tp->mmio_addr, regs->len); + spin_unlock_irqrestore(&tp->lock, flags); +} + +static int sis190_nway_reset(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_nway_restart(&tp->mii_if); +} + +static u32 sis190_get_msglevel(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void sis190_set_msglevel(struct net_device *dev, u32 value) +{ + struct sis190_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static struct ethtool_ops sis190_ethtool_ops = { + .get_settings = sis190_get_settings, + .set_settings = sis190_set_settings, + .get_drvinfo = sis190_get_drvinfo, + .get_regs_len = sis190_get_regs_len, + .get_regs = sis190_get_regs, + .get_link = ethtool_op_get_link, + .get_msglevel = sis190_get_msglevel, + .set_msglevel = sis190_set_msglevel, + .nway_reset = sis190_nway_reset, +}; + +static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return !netif_running(dev) ? -EINVAL : + generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); +} + +static int __devinit sis190_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + if (!printed_version) { + net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); + printed_version = 1; + } + + dev = sis190_init_board(pdev); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + goto out; + } + + tp = netdev_priv(dev); + ioaddr = tp->mmio_addr; + + rc = sis190_get_mac_addr(pdev, dev); + if (rc < 0) + goto err_release_board; + + sis190_init_rxfilter(dev); + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + dev->open = sis190_open; + dev->stop = sis190_close; + dev->do_ioctl = sis190_ioctl; + dev->get_stats = sis190_get_stats; + dev->tx_timeout = sis190_tx_timeout; + dev->watchdog_timeo = SIS190_TX_TIMEOUT; + dev->hard_start_xmit = sis190_start_xmit; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sis190_netpoll; +#endif + dev->set_multicast_list = sis190_set_rx_mode; + SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) 0xdead; + + spin_lock_init(&tp->lock); + + rc = sis190_mii_probe(dev); + if (rc < 0) + goto err_release_board; + + rc = register_netdev(dev); + if (rc < 0) + goto err_remove_mii; + + pci_set_drvdata(pdev, dev); + + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + pci_name(pdev), sis_chip_info[ent->driver_data].name, + ioaddr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + net_probe(tp, KERN_INFO "%s: %s mode.\n", dev->name, + (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII"); + + netif_carrier_off(dev); + + sis190_set_speed_auto(dev); +out: + return rc; + +err_remove_mii: + sis190_mii_remove(dev); +err_release_board: + sis190_release_board(pdev); + goto out; +} + +static void __devexit sis190_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + sis190_mii_remove(dev); + unregister_netdev(dev); + sis190_release_board(pdev); + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver sis190_pci_driver = { + .name = DRV_NAME, + .id_table = sis190_pci_tbl, + .probe = sis190_init_one, + .remove = __devexit_p(sis190_remove_one), +}; + +static int __init sis190_init_module(void) +{ + return pci_module_init(&sis190_pci_driver); +} + +static void __exit sis190_cleanup_module(void) +{ + pci_unregister_driver(&sis190_pci_driver); +} + +module_init(sis190_init_module); +module_exit(sis190_cleanup_module); diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index a9b06b8d8e3..ac9ce6509ee 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -986,7 +986,7 @@ static const char * chip_ids[ 16 ] = { }) #endif -#if SMC_CAN_USE_DATACS +#ifdef SMC_CAN_USE_DATACS #define SMC_PUSH_DATA(p, l) \ if ( lp->datacs ) { \ unsigned char *__ptr = (p); \ diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c new file mode 100644 index 00000000000..4e19220473d --- /dev/null +++ b/drivers/net/spider_net.c @@ -0,0 +1,2334 @@ +/* + * Network device driver for Cell Processor-Based Blade + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> + +#include <linux/compiler.h> +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/firmware.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/tcp.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/workqueue.h> +#include <asm/bitops.h> +#include <asm/pci-bridge.h> +#include <net/checksum.h> + +#include "spider_net.h" + +MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \ + "<Jens.Osterkamp@de.ibm.com>"); +MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver"); +MODULE_LICENSE("GPL"); + +static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT; +static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT; + +module_param(rx_descriptors, int, 0644); +module_param(tx_descriptors, int, 0644); + +MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \ + "in rx chains"); +MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \ + "in tx chain"); + +char spider_net_driver_name[] = "spidernet"; + +static struct pci_device_id spider_net_pci_tbl[] = { + { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl); + +/** + * spider_net_read_reg - reads an SMMIO register of a card + * @card: device structure + * @reg: register to read from + * + * returns the content of the specified SMMIO register. + */ +static u32 +spider_net_read_reg(struct spider_net_card *card, u32 reg) +{ + u32 value; + + value = readl(card->regs + reg); + value = le32_to_cpu(value); + + return value; +} + +/** + * spider_net_write_reg - writes to an SMMIO register of a card + * @card: device structure + * @reg: register to write to + * @value: value to write into the specified SMMIO register + */ +static void +spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) +{ + value = cpu_to_le32(value); + writel(value, card->regs + reg); +} + +/** + * spider_net_write_reg_sync - writes to an SMMIO register of a card + * @card: device structure + * @reg: register to write to + * @value: value to write into the specified SMMIO register + * + * Unlike spider_net_write_reg, this will also make sure the + * data arrives on the card by reading the reg again. + */ +static void +spider_net_write_reg_sync(struct spider_net_card *card, u32 reg, u32 value) +{ + value = cpu_to_le32(value); + writel(value, card->regs + reg); + (void)readl(card->regs + reg); +} + +/** + * spider_net_rx_irq_off - switch off rx irq on this spider card + * @card: device structure + * + * switches off rx irq by masking them out in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_off(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue &= ~SPIDER_NET_RXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** spider_net_write_phy - write to phy register + * @netdev: adapter to be written to + * @mii_id: id of MII + * @reg: PHY register + * @val: value to be written to phy register + * + * spider_net_write_phy_register writes to an arbitrary PHY + * register via the spider GPCWOPCMD register. We assume the queue does + * not run full (not more than 15 commands outstanding). + **/ +static void +spider_net_write_phy(struct net_device *netdev, int mii_id, + int reg, int val) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 writevalue; + + writevalue = ((u32)mii_id << 21) | + ((u32)reg << 16) | ((u32)val); + + spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue); +} + +/** spider_net_read_phy - read from phy register + * @netdev: network device to be read from + * @mii_id: id of MII + * @reg: PHY register + * + * Returns value read from PHY register + * + * spider_net_write_phy reads from an arbitrary PHY + * register via the spider GPCROPCMD register + **/ +static int +spider_net_read_phy(struct net_device *netdev, int mii_id, int reg) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 readvalue; + + readvalue = ((u32)mii_id << 21) | ((u32)reg << 16); + spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue); + + /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT + * interrupt, as we poll for the completion of the read operation + * in spider_net_read_phy. Should take about 50 us */ + do { + readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD); + } while (readvalue & SPIDER_NET_GPREXEC); + + readvalue &= SPIDER_NET_GPRDAT_MASK; + + return readvalue; +} + +/** + * spider_net_rx_irq_on - switch on rx irq on this spider card + * @card: device structure + * + * switches on rx irq by enabling them in the GHIINTnMSK register + */ +static void +spider_net_rx_irq_on(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue |= SPIDER_NET_RXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_tx_irq_off - switch off tx irq on this spider card + * @card: device structure + * + * switches off tx irq by masking them out in the GHIINTnMSK register + */ +static void +spider_net_tx_irq_off(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue &= ~SPIDER_NET_TXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_tx_irq_on - switch on tx irq on this spider card + * @card: device structure + * + * switches on tx irq by enabling them in the GHIINTnMSK register + */ +static void +spider_net_tx_irq_on(struct spider_net_card *card) +{ + u32 regvalue; + unsigned long flags; + + spin_lock_irqsave(&card->intmask_lock, flags); + regvalue = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); + regvalue |= SPIDER_NET_TXINT; + spider_net_write_reg_sync(card, SPIDER_NET_GHIINT0MSK, regvalue); + spin_unlock_irqrestore(&card->intmask_lock, flags); +} + +/** + * spider_net_set_promisc - sets the unicast address or the promiscuous mode + * @card: card structure + * + * spider_net_set_promisc sets the unicast destination address filter and + * thus either allows for non-promisc mode or promisc mode + */ +static void +spider_net_set_promisc(struct spider_net_card *card) +{ + u32 macu, macl; + struct net_device *netdev = card->netdev; + + if (netdev->flags & IFF_PROMISC) { + /* clear destination entry 0 */ + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_PROMISC_VALUE); + } else { + macu = netdev->dev_addr[0]; + macu <<= 8; + macu |= netdev->dev_addr[1]; + memcpy(&macl, &netdev->dev_addr[2], sizeof(macl)); + + macu |= SPIDER_NET_UA_DESCR_VALUE; + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu); + spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl); + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, + SPIDER_NET_NONPROMISC_VALUE); + } +} + +/** + * spider_net_get_mac_address - read mac address from spider card + * @card: device structure + * + * reads MAC address from GMACUNIMACU and GMACUNIMACL registers + */ +static int +spider_net_get_mac_address(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 macl, macu; + + macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL); + macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU); + + netdev->dev_addr[0] = (macu >> 24) & 0xff; + netdev->dev_addr[1] = (macu >> 16) & 0xff; + netdev->dev_addr[2] = (macu >> 8) & 0xff; + netdev->dev_addr[3] = macu & 0xff; + netdev->dev_addr[4] = (macl >> 8) & 0xff; + netdev->dev_addr[5] = macl & 0xff; + + if (!is_valid_ether_addr(&netdev->dev_addr[0])) + return -EINVAL; + + return 0; +} + +/** + * spider_net_get_descr_status -- returns the status of a descriptor + * @descr: descriptor to look at + * + * returns the status as in the dmac_cmd_status field of the descriptor + */ +static enum spider_net_descr_status +spider_net_get_descr_status(struct spider_net_descr *descr) +{ + u32 cmd_status; + rmb(); + cmd_status = descr->dmac_cmd_status; + rmb(); + cmd_status >>= SPIDER_NET_DESCR_IND_PROC_SHIFT; + /* no need to mask out any bits, as cmd_status is 32 bits wide only + * (and unsigned) */ + return cmd_status; +} + +/** + * spider_net_set_descr_status -- sets the status of a descriptor + * @descr: descriptor to change + * @status: status to set in the descriptor + * + * changes the status to the specified value. Doesn't change other bits + * in the status + */ +static void +spider_net_set_descr_status(struct spider_net_descr *descr, + enum spider_net_descr_status status) +{ + u32 cmd_status; + /* read the status */ + mb(); + cmd_status = descr->dmac_cmd_status; + /* clean the upper 4 bits */ + cmd_status &= SPIDER_NET_DESCR_IND_PROC_MASKO; + /* add the status to it */ + cmd_status |= ((u32)status)<<SPIDER_NET_DESCR_IND_PROC_SHIFT; + /* and write it back */ + descr->dmac_cmd_status = cmd_status; + wmb(); +} + +/** + * spider_net_free_chain - free descriptor chain + * @card: card structure + * @chain: address of chain + * + */ +static void +spider_net_free_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain) +{ + struct spider_net_descr *descr; + + for (descr = chain->tail; !descr->bus_addr; descr = descr->next) { + pci_unmap_single(card->pdev, descr->bus_addr, + SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL); + descr->bus_addr = 0; + } +} + +/** + * spider_net_init_chain - links descriptor chain + * @card: card structure + * @chain: address of chain + * @start_descr: address of descriptor array + * @no: number of descriptors + * + * we manage a circular list that mirrors the hardware structure, + * except that the hardware uses bus addresses. + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_init_chain(struct spider_net_card *card, + struct spider_net_descr_chain *chain, + struct spider_net_descr *start_descr, int no) +{ + int i; + struct spider_net_descr *descr; + + spin_lock_init(&card->chain_lock); + + descr = start_descr; + memset(descr, 0, sizeof(*descr) * no); + + /* set up the hardware pointers in each descriptor */ + for (i=0; i<no; i++, descr++) { + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + + descr->bus_addr = + pci_map_single(card->pdev, descr, + SPIDER_NET_DESCR_SIZE, + PCI_DMA_BIDIRECTIONAL); + + if (descr->bus_addr == DMA_ERROR_CODE) + goto iommu_error; + + descr->next = descr + 1; + descr->prev = descr - 1; + + } + /* do actual circular list */ + (descr-1)->next = start_descr; + start_descr->prev = descr-1; + + descr = start_descr; + for (i=0; i < no; i++, descr++) { + descr->next_descr_addr = descr->next->bus_addr; + } + + chain->head = start_descr; + chain->tail = start_descr; + + return 0; + +iommu_error: + descr = start_descr; + for (i=0; i < no; i++, descr++) + if (descr->bus_addr) + pci_unmap_single(card->pdev, descr->bus_addr, + SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL); + return -ENOMEM; +} + +/** + * spider_net_free_rx_chain_contents - frees descr contents in rx chain + * @card: card structure + * + * returns 0 on success, <0 on failure + */ +static void +spider_net_free_rx_chain_contents(struct spider_net_card *card) +{ + struct spider_net_descr *descr; + + descr = card->rx_chain.head; + while (descr->next != card->rx_chain.head) { + if (descr->skb) { + dev_kfree_skb(descr->skb); + pci_unmap_single(card->pdev, descr->buf_addr, + SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + } + descr = descr->next; + } +} + +/** + * spider_net_prepare_rx_descr - reinitializes a rx descriptor + * @card: card structure + * @descr: descriptor to re-init + * + * return 0 on succes, <0 on failure + * + * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. + * Activate the descriptor state-wise + */ +static int +spider_net_prepare_rx_descr(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + int error = 0; + int offset; + int bufsize; + + /* we need to round up the buffer size to a multiple of 128 */ + bufsize = (SPIDER_NET_MAX_MTU + SPIDER_NET_RXBUF_ALIGN - 1) & + (~(SPIDER_NET_RXBUF_ALIGN - 1)); + + /* and we need to have it 128 byte aligned, therefore we allocate a + * bit more */ + /* allocate an skb */ + descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1); + if (!descr->skb) { + if (net_ratelimit()) + if (netif_msg_rx_err(card)) + pr_err("Not enough memory to allocate " + "rx buffer\n"); + return -ENOMEM; + } + descr->buf_size = bufsize; + descr->result_size = 0; + descr->valid_size = 0; + descr->data_status = 0; + descr->data_error = 0; + + offset = ((unsigned long)descr->skb->data) & + (SPIDER_NET_RXBUF_ALIGN - 1); + if (offset) + skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset); + /* io-mmu-map the skb */ + descr->buf_addr = pci_map_single(card->pdev, descr->skb->data, + SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + if (descr->buf_addr == DMA_ERROR_CODE) { + dev_kfree_skb_any(descr->skb); + if (netif_msg_rx_err(card)) + pr_err("Could not iommu-map rx buffer\n"); + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + } else { + descr->dmac_cmd_status = SPIDER_NET_DMAC_RX_CARDOWNED; + } + + return error; +} + +/** + * spider_net_enable_rxctails - sets RX dmac chain tail addresses + * @card: card structure + * + * spider_net_enable_rxctails sets the RX DMAC chain tail adresses in the + * chip by writing to the appropriate register. DMA is enabled in + * spider_net_enable_rxdmac. + */ +static void +spider_net_enable_rxchtails(struct spider_net_card *card) +{ + /* assume chain is aligned correctly */ + spider_net_write_reg(card, SPIDER_NET_GDADCHA , + card->rx_chain.tail->bus_addr); +} + +/** + * spider_net_enable_rxdmac - enables a receive DMA controller + * @card: card structure + * + * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN + * in the GDADMACCNTR register + */ +static void +spider_net_enable_rxdmac(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_VALUE); +} + +/** + * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains + * @card: card structure + * + * refills descriptors in all chains (last used chain first): allocates skbs + * and iommu-maps them. + */ +static void +spider_net_refill_rx_chain(struct spider_net_card *card) +{ + struct spider_net_descr_chain *chain; + int count = 0; + unsigned long flags; + + chain = &card->rx_chain; + + spin_lock_irqsave(&card->chain_lock, flags); + while (spider_net_get_descr_status(chain->head) == + SPIDER_NET_DESCR_NOT_IN_USE) { + if (spider_net_prepare_rx_descr(card, chain->head)) + break; + count++; + chain->head = chain->head->next; + } + spin_unlock_irqrestore(&card->chain_lock, flags); + + /* could be optimized, only do that, if we know the DMA processing + * has terminated */ + if (count) + spider_net_enable_rxdmac(card); +} + +/** + * spider_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains + * @card: card structure + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_alloc_rx_skbs(struct spider_net_card *card) +{ + int result; + struct spider_net_descr_chain *chain; + + result = -ENOMEM; + + chain = &card->rx_chain; + /* put at least one buffer into the chain. if this fails, + * we've got a problem. if not, spider_net_refill_rx_chain + * will do the rest at the end of this function */ + if (spider_net_prepare_rx_descr(card, chain->head)) + goto error; + else + chain->head = chain->head->next; + + /* this will allocate the rest of the rx buffers; if not, it's + * business as usual later on */ + spider_net_refill_rx_chain(card); + return 0; + +error: + spider_net_free_rx_chain_contents(card); + return result; +} + +/** + * spider_net_release_tx_descr - processes a used tx descriptor + * @card: card structure + * @descr: descriptor to release + * + * releases a used tx descriptor (unmapping, freeing of skb) + */ +static void +spider_net_release_tx_descr(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + struct sk_buff *skb; + + /* unmap the skb */ + skb = descr->skb; + pci_unmap_single(card->pdev, descr->buf_addr, skb->len, + PCI_DMA_BIDIRECTIONAL); + + dev_kfree_skb_any(skb); + + /* set status to not used */ + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); +} + +/** + * spider_net_release_tx_chain - processes sent tx descriptors + * @card: adapter structure + * @brutal: if set, don't care about whether descriptor seems to be in use + * + * releases the tx descriptors that spider has finished with (if non-brutal) + * or simply release tx descriptors (if brutal) + */ +static void +spider_net_release_tx_chain(struct spider_net_card *card, int brutal) +{ + struct spider_net_descr_chain *tx_chain = &card->tx_chain; + enum spider_net_descr_status status; + + spider_net_tx_irq_off(card); + + /* no lock for chain needed, if this is only executed once at a time */ +again: + for (;;) { + status = spider_net_get_descr_status(tx_chain->tail); + switch (status) { + case SPIDER_NET_DESCR_CARDOWNED: + if (!brutal) goto out; + /* fallthrough, if we release the descriptors + * brutally (then we don't care about + * SPIDER_NET_DESCR_CARDOWNED) */ + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + if (netif_msg_tx_err(card)) + pr_err("%s: forcing end of tx descriptor " + "with status x%02x\n", + card->netdev->name, status); + card->netdev_stats.tx_dropped++; + break; + + case SPIDER_NET_DESCR_COMPLETE: + card->netdev_stats.tx_packets++; + card->netdev_stats.tx_bytes += + tx_chain->tail->skb->len; + break; + + default: /* any other value (== SPIDER_NET_DESCR_NOT_IN_USE) */ + goto out; + } + spider_net_release_tx_descr(card, tx_chain->tail); + tx_chain->tail = tx_chain->tail->next; + } +out: + netif_wake_queue(card->netdev); + + if (!brutal) { + /* switch on tx irqs (while we are still in the interrupt + * handler, so we don't get an interrupt), check again + * for done descriptors. This results in fewer interrupts */ + spider_net_tx_irq_on(card); + status = spider_net_get_descr_status(tx_chain->tail); + switch (status) { + case SPIDER_NET_DESCR_RESPONSE_ERROR: + case SPIDER_NET_DESCR_PROTECTION_ERROR: + case SPIDER_NET_DESCR_FORCE_END: + case SPIDER_NET_DESCR_COMPLETE: + goto again; + default: + break; + } + } + +} + +/** + * spider_net_get_multicast_hash - generates hash for multicast filter table + * @addr: multicast address + * + * returns the hash value. + * + * spider_net_get_multicast_hash calculates a hash value for a given multicast + * address, that is used to set the multicast filter tables + */ +static u8 +spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr) +{ + /* FIXME: an addr of 01:00:5e:00:00:01 must result in 0xa9, + * ff:ff:ff:ff:ff:ff must result in 0xfd */ + u32 crc; + u8 hash; + + crc = crc32_be(~0, addr, netdev->addr_len); + + hash = (crc >> 27); + hash <<= 3; + hash |= crc & 7; + + return hash; +} + +/** + * spider_net_set_multi - sets multicast addresses and promisc flags + * @netdev: interface device structure + * + * spider_net_set_multi configures multicast addresses as needed for the + * netdev interface. It also sets up multicast, allmulti and promisc + * flags appropriately + */ +static void +spider_net_set_multi(struct net_device *netdev) +{ + struct dev_mc_list *mc; + u8 hash; + int i; + u32 reg; + struct spider_net_card *card = netdev_priv(netdev); + unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] = + {0, }; + + spider_net_set_promisc(card); + + if (netdev->flags & IFF_ALLMULTI) { + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) { + set_bit(i, bitmask); + } + goto write_hash; + } + + /* well, we know, what the broadcast hash value is: it's xfd + hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */ + set_bit(0xfd, bitmask); + + for (mc = netdev->mc_list; mc; mc = mc->next) { + hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr); + set_bit(hash, bitmask); + } + +write_hash: + for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) { + reg = 0; + if (test_bit(i * 4, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 1, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 2, bitmask)) + reg += 0x08; + reg <<= 8; + if (test_bit(i * 4 + 3, bitmask)) + reg += 0x08; + + spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg); + } +} + +/** + * spider_net_disable_rxdmac - disables the receive DMA controller + * @card: card structure + * + * spider_net_disable_rxdmac terminates processing on the DMA controller by + * turing off DMA and issueing a force end + */ +static void +spider_net_disable_rxdmac(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR, + SPIDER_NET_DMA_RX_FEND_VALUE); +} + +/** + * spider_net_stop - called upon ifconfig down + * @netdev: interface device structure + * + * always returns 0 + */ +int +spider_net_stop(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + + netif_poll_disable(netdev); + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + /* disable/mask all interrupts */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0); + + /* free_irq(netdev->irq, netdev);*/ + free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_FEND_VALUE); + + /* turn off DMA, force end */ + spider_net_disable_rxdmac(card); + + /* release chains */ + spider_net_release_tx_chain(card, 1); + + spider_net_free_chain(card, &card->tx_chain); + spider_net_free_chain(card, &card->rx_chain); + + return 0; +} + +/** + * spider_net_get_next_tx_descr - returns the next available tx descriptor + * @card: device structure to get descriptor from + * + * returns the address of the next descriptor, or NULL if not available. + */ +static struct spider_net_descr * +spider_net_get_next_tx_descr(struct spider_net_card *card) +{ + /* check, if head points to not-in-use descr */ + if ( spider_net_get_descr_status(card->tx_chain.head) == + SPIDER_NET_DESCR_NOT_IN_USE ) { + return card->tx_chain.head; + } else { + return NULL; + } +} + +/** + * spider_net_set_txdescr_cmdstat - sets the tx descriptor command field + * @descr: descriptor structure to fill out + * @skb: packet to consider + * + * fills out the command and status field of the descriptor structure, + * depending on hardware checksum settings. This function assumes a wmb() + * has executed before. + */ +static void +spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr, + struct sk_buff *skb) +{ + if (skb->ip_summed != CHECKSUM_HW) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; + return; + } + + /* is packet ip? + * if yes: tcp? udp? */ + if (skb->protocol == htons(ETH_P_IP)) { + if (skb->nh.iph->protocol == IPPROTO_TCP) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_TCPCS; + } else if (skb->nh.iph->protocol == IPPROTO_UDP) { + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_UDPCS; + } else { /* the stack should checksum non-tcp and non-udp + packets on his own: NETIF_F_IP_CSUM */ + descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS; + } + } +} + +/** + * spider_net_prepare_tx_descr - fill tx descriptor with skb data + * @card: card structure + * @descr: descriptor structure to fill out + * @skb: packet to use + * + * returns 0 on success, <0 on failure. + * + * fills out the descriptor structure with skb data and len. Copies data, + * if needed (32bit DMA!) + */ +static int +spider_net_prepare_tx_descr(struct spider_net_card *card, + struct spider_net_descr *descr, + struct sk_buff *skb) +{ + descr->buf_addr = pci_map_single(card->pdev, skb->data, + skb->len, PCI_DMA_BIDIRECTIONAL); + if (descr->buf_addr == DMA_ERROR_CODE) { + if (netif_msg_tx_err(card)) + pr_err("could not iommu-map packet (%p, %i). " + "Dropping packet\n", skb->data, skb->len); + return -ENOMEM; + } + + descr->buf_size = skb->len; + descr->skb = skb; + descr->data_status = 0; + + /* make sure the above values are in memory before we change the + * status */ + wmb(); + + spider_net_set_txdescr_cmdstat(descr,skb); + + return 0; +} + +/** + * spider_net_kick_tx_dma - enables TX DMA processing + * @card: card structure + * @descr: descriptor address to enable TX processing at + * + * spider_net_kick_tx_dma writes the current tx chain head as start address + * of the tx descriptor chain and enables the transmission DMA engine + */ +static void +spider_net_kick_tx_dma(struct spider_net_card *card, + struct spider_net_descr *descr) +{ + /* this is the only descriptor in the output chain. + * Enable TX DMA */ + + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + descr->bus_addr); + + spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR, + SPIDER_NET_DMA_TX_VALUE); +} + +/** + * spider_net_xmit - transmits a frame over the device + * @skb: packet to send out + * @netdev: interface device structure + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + struct spider_net_descr *descr; + int result; + + descr = spider_net_get_next_tx_descr(card); + + if (!descr) { + netif_stop_queue(netdev); + + descr = spider_net_get_next_tx_descr(card); + if (!descr) + goto error; + else + netif_start_queue(netdev); + } + + result = spider_net_prepare_tx_descr(card, descr, skb); + if (result) + goto error; + + card->tx_chain.head = card->tx_chain.head->next; + + /* make sure the status from spider_net_prepare_tx_descr is in + * memory before we check out the previous descriptor */ + wmb(); + + if (spider_net_get_descr_status(descr->prev) != + SPIDER_NET_DESCR_CARDOWNED) + spider_net_kick_tx_dma(card, descr); + + return NETDEV_TX_OK; + +error: + card->netdev_stats.tx_dropped++; + return NETDEV_TX_LOCKED; +} + +/** + * spider_net_do_ioctl - called for device ioctls + * @netdev: interface device structure + * @ifr: request parameter structure for ioctl + * @cmd: command code for ioctl + * + * returns 0 on success, <0 on failure. Currently, we have no special ioctls. + * -EOPNOTSUPP is returned, if an unknown ioctl was requested + */ +static int +spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + default: + return -EOPNOTSUPP; + } +} + +/** + * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on + * @descr: descriptor to process + * @card: card structure + * + * returns 1 on success, 0 if no packet was passed to the stack + * + * iommu-unmaps the skb, fills out skb structure and passes the data to the + * stack. The descriptor state is not changed. + */ +static int +spider_net_pass_skb_up(struct spider_net_descr *descr, + struct spider_net_card *card) +{ + struct sk_buff *skb; + struct net_device *netdev; + u32 data_status, data_error; + + data_status = descr->data_status; + data_error = descr->data_error; + + netdev = card->netdev; + + /* check for errors in the data_error flag */ + if ((data_error & SPIDER_NET_DATA_ERROR_MASK) && + netif_msg_rx_err(card)) + pr_err("error in received descriptor found, " + "data_status=x%08x, data_error=x%08x\n", + data_status, data_error); + + /* prepare skb, unmap descriptor */ + skb = descr->skb; + pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_MTU, + PCI_DMA_BIDIRECTIONAL); + + /* the cases we'll throw away the packet immediately */ + if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) + return 0; + + skb->dev = netdev; + skb_put(skb, descr->valid_size); + + /* the card seems to add 2 bytes of junk in front + * of the ethernet frame */ +#define SPIDER_MISALIGN 2 + skb_pull(skb, SPIDER_MISALIGN); + skb->protocol = eth_type_trans(skb, netdev); + + /* checksum offload */ + if (card->options.rx_csum) { + if ( (data_status & SPIDER_NET_DATA_STATUS_CHK_MASK) && + (!(data_error & SPIDER_NET_DATA_ERROR_CHK_MASK)) ) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; + } else { + skb->ip_summed = CHECKSUM_NONE; + } + + if (data_status & SPIDER_NET_VLAN_PACKET) { + /* further enhancements: HW-accel VLAN + * vlan_hwaccel_receive_skb + */ + } + + /* pass skb up to stack */ + netif_receive_skb(skb); + + /* update netdevice statistics */ + card->netdev_stats.rx_packets++; + card->netdev_stats.rx_bytes += skb->len; + + return 1; +} + +/** + * spider_net_decode_descr - processes an rx descriptor + * @card: card structure + * + * returns 1 if a packet has been sent to the stack, otherwise 0 + * + * processes an rx descriptor by iommu-unmapping the data buffer and passing + * the packet up to the stack + */ +static int +spider_net_decode_one_descr(struct spider_net_card *card) +{ + enum spider_net_descr_status status; + struct spider_net_descr *descr; + struct spider_net_descr_chain *chain; + int result; + + chain = &card->rx_chain; + descr = chain->tail; + + status = spider_net_get_descr_status(descr); + + if (status == SPIDER_NET_DESCR_CARDOWNED) { + /* nothing in the descriptor yet */ + return 0; + } + + if (status == SPIDER_NET_DESCR_NOT_IN_USE) { + /* not initialized yet, I bet chain->tail == chain->head + * and the ring is empty */ + spider_net_refill_rx_chain(card); + return 0; + } + + /* descriptor definitively used -- move on head */ + chain->tail = descr->next; + + result = 0; + if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) || + (status == SPIDER_NET_DESCR_PROTECTION_ERROR) || + (status == SPIDER_NET_DESCR_FORCE_END) ) { + if (netif_msg_rx_err(card)) + pr_err("%s: dropping RX descriptor with state %d\n", + card->netdev->name, status); + card->netdev_stats.rx_dropped++; + goto refill; + } + + if ( (status != SPIDER_NET_DESCR_COMPLETE) && + (status != SPIDER_NET_DESCR_FRAME_END) ) { + if (netif_msg_rx_err(card)) + pr_err("%s: RX descriptor with state %d\n", + card->netdev->name, status); + goto refill; + } + + /* ok, we've got a packet in descr */ + result = spider_net_pass_skb_up(descr, card); +refill: + spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE); + /* change the descriptor state: */ + spider_net_refill_rx_chain(card); + + return result; +} + +/** + * spider_net_poll - NAPI poll function called by the stack to return packets + * @netdev: interface device structure + * @budget: number of packets we can pass to the stack at most + * + * returns 0 if no more packets available to the driver/stack. Returns 1, + * if the quota is exceeded, but the driver has still packets. + * + * spider_net_poll returns all packets from the rx descriptors to the stack + * (using netif_receive_skb). If all/enough packets are up, the driver + * reenables interrupts and returns 0. If not, 1 is returned. + */ +static int +spider_net_poll(struct net_device *netdev, int *budget) +{ + struct spider_net_card *card = netdev_priv(netdev); + int packets_to_do, packets_done = 0; + int no_more_packets = 0; + + packets_to_do = min(*budget, netdev->quota); + + while (packets_to_do) { + if (spider_net_decode_one_descr(card)) { + packets_done++; + packets_to_do--; + } else { + /* no more packets for the stack */ + no_more_packets = 1; + break; + } + } + + netdev->quota -= packets_done; + *budget -= packets_done; + + /* if all packets are in the stack, enable interrupts and return 0 */ + /* if not, return 1 */ + if (no_more_packets) { + netif_rx_complete(netdev); + spider_net_rx_irq_on(card); + return 0; + } + + return 1; +} + +/** + * spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card + * @netdev: interface device structure + * @grp: vlan_group structure that is registered (NULL on destroying interface) + */ +static void +spider_net_vlan_rx_reg(struct net_device *netdev, struct vlan_group *grp) +{ + /* further enhancement... yet to do */ + return; +} + +/** + * spider_net_vlan_rx_add - adds VLAN id to the card filter + * @netdev: interface device structure + * @vid: VLAN id to add + */ +static void +spider_net_vlan_rx_add(struct net_device *netdev, uint16_t vid) +{ + /* further enhancement... yet to do */ + /* add vid to card's VLAN filter table */ + return; +} + +/** + * spider_net_vlan_rx_kill - removes VLAN id to the card filter + * @netdev: interface device structure + * @vid: VLAN id to remove + */ +static void +spider_net_vlan_rx_kill(struct net_device *netdev, uint16_t vid) +{ + /* further enhancement... yet to do */ + /* remove vid from card's VLAN filter table */ +} + +/** + * spider_net_get_stats - get interface statistics + * @netdev: interface device structure + * + * returns the interface statistics residing in the spider_net_card struct + */ +static struct net_device_stats * +spider_net_get_stats(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + struct net_device_stats *stats = &card->netdev_stats; + return stats; +} + +/** + * spider_net_change_mtu - changes the MTU of an interface + * @netdev: interface device structure + * @new_mtu: new MTU value + * + * returns 0 on success, <0 on failure + */ +static int +spider_net_change_mtu(struct net_device *netdev, int new_mtu) +{ + /* no need to re-alloc skbs or so -- the max mtu is about 2.3k + * and mtu is outbound only anyway */ + if ( (new_mtu < SPIDER_NET_MIN_MTU ) || + (new_mtu > SPIDER_NET_MAX_MTU) ) + return -EINVAL; + netdev->mtu = new_mtu; + return 0; +} + +/** + * spider_net_set_mac - sets the MAC of an interface + * @netdev: interface device structure + * @ptr: pointer to new MAC address + * + * Returns 0 on success, <0 on failure. Currently, we don't support this + * and will always return EOPNOTSUPP. + */ +static int +spider_net_set_mac(struct net_device *netdev, void *p) +{ + struct spider_net_card *card = netdev_priv(netdev); + u32 macl, macu, regvalue; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + /* switch off GMACTPE and GMACRPE */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue &= ~((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + /* write mac */ + macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) + + (addr->sa_data[2]<<8) + (addr->sa_data[3]); + macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu); + spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl); + + /* switch GMACTPE and GMACRPE back on */ + regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD); + regvalue |= ((1 << 5) | (1 << 6)); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue); + + spider_net_set_promisc(card); + + /* look up, whether we have been successful */ + if (spider_net_get_mac_address(netdev)) + return -EADDRNOTAVAIL; + if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len)) + return -EADDRNOTAVAIL; + + return 0; +} + +/** + * spider_net_enable_txdmac - enables a TX DMA controller + * @card: card structure + * + * spider_net_enable_txdmac enables the TX DMA controller by setting the + * descriptor chain tail address + */ +static void +spider_net_enable_txdmac(struct spider_net_card *card) +{ + /* assume chain is aligned correctly */ + spider_net_write_reg(card, SPIDER_NET_GDTDCHA, + card->tx_chain.tail->bus_addr); +} + +/** + * spider_net_handle_error_irq - handles errors raised by an interrupt + * @card: card structure + * @status_reg: interrupt status register 0 (GHIINT0STS) + * + * spider_net_handle_error_irq treats or ignores all error conditions + * found when an interrupt is presented + */ +static void +spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) +{ + u32 error_reg1, error_reg2; + u32 i; + int show_error = 1; + + error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); + error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); + + /* check GHIINT0STS ************************************/ + if (status_reg) + for (i = 0; i < 32; i++) + if (status_reg & (1<<i)) + switch (i) + { + /* let error_reg1 and error_reg2 evaluation decide, what to do + case SPIDER_NET_PHYINT: + case SPIDER_NET_GMAC2INT: + case SPIDER_NET_GMAC1INT: + case SPIDER_NET_GIPSINT: + case SPIDER_NET_GFIFOINT: + case SPIDER_NET_DMACINT: + case SPIDER_NET_GSYSINT: + break; */ + + case SPIDER_NET_GPWOPCMPINT: + /* PHY write operation completed */ + show_error = 0; + break; + case SPIDER_NET_GPROPCMPINT: + /* PHY read operation completed */ + /* we don't use semaphores, as we poll for the completion + * of the read operation in spider_net_read_phy. Should take + * about 50 us */ + show_error = 0; + break; + case SPIDER_NET_GPWFFINT: + /* PHY command queue full */ + if (netif_msg_intr(card)) + pr_err("PHY write queue full\n"); + show_error = 0; + break; + + /* case SPIDER_NET_GRMDADRINT: not used. print a message */ + /* case SPIDER_NET_GRMARPINT: not used. print a message */ + /* case SPIDER_NET_GRMMPINT: not used. print a message */ + + case SPIDER_NET_GDTDEN0INT: + /* someone has set TX_DMA_EN to 0 */ + show_error = 0; + break; + + case SPIDER_NET_GDDDEN0INT: /* fallthrough */ + case SPIDER_NET_GDCDEN0INT: /* fallthrough */ + case SPIDER_NET_GDBDEN0INT: /* fallthrough */ + case SPIDER_NET_GDADEN0INT: + /* someone has set RX_DMA_EN to 0 */ + show_error = 0; + break; + + /* RX interrupts */ + case SPIDER_NET_GDDFDCINT: + case SPIDER_NET_GDCFDCINT: + case SPIDER_NET_GDBFDCINT: + case SPIDER_NET_GDAFDCINT: + /* case SPIDER_NET_GDNMINT: not used. print a message */ + /* case SPIDER_NET_GCNMINT: not used. print a message */ + /* case SPIDER_NET_GBNMINT: not used. print a message */ + /* case SPIDER_NET_GANMINT: not used. print a message */ + /* case SPIDER_NET_GRFNMINT: not used. print a message */ + show_error = 0; + break; + + /* TX interrupts */ + case SPIDER_NET_GDTFDCINT: + show_error = 0; + break; + case SPIDER_NET_GTTEDINT: + show_error = 0; + break; + case SPIDER_NET_GDTDCEINT: + /* chain end. If a descriptor should be sent, kick off + * tx dma + if (card->tx_chain.tail == card->tx_chain.head) + spider_net_kick_tx_dma(card); + show_error = 0; */ + break; + + /* case SPIDER_NET_G1TMCNTINT: not used. print a message */ + /* case SPIDER_NET_GFREECNTINT: not used. print a message */ + } + + /* check GHIINT1STS ************************************/ + if (error_reg1) + for (i = 0; i < 32; i++) + if (error_reg1 & (1<<i)) + switch (i) + { + case SPIDER_NET_GTMFLLINT: + if (netif_msg_intr(card)) + pr_err("Spider TX RAM full\n"); + show_error = 0; + break; + case SPIDER_NET_GRMFLLINT: + if (netif_msg_intr(card)) + pr_err("Spider RX RAM full, incoming packets " + "might be discarded !\n"); + netif_rx_schedule(card->netdev); + spider_net_enable_rxchtails(card); + spider_net_enable_rxdmac(card); + break; + + /* case SPIDER_NET_GTMSHTINT: problem, print a message */ + case SPIDER_NET_GDTINVDINT: + /* allrighty. tx from previous descr ok */ + show_error = 0; + break; + /* case SPIDER_NET_GRFDFLLINT: print a message down there */ + /* case SPIDER_NET_GRFCFLLINT: print a message down there */ + /* case SPIDER_NET_GRFBFLLINT: print a message down there */ + /* case SPIDER_NET_GRFAFLLINT: print a message down there */ + + /* chain end */ + case SPIDER_NET_GDDDCEINT: /* fallthrough */ + case SPIDER_NET_GDCDCEINT: /* fallthrough */ + case SPIDER_NET_GDBDCEINT: /* fallthrough */ + case SPIDER_NET_GDADCEINT: + if (netif_msg_intr(card)) + pr_err("got descriptor chain end interrupt, " + "restarting DMAC %c.\n", + 'D'+i-SPIDER_NET_GDDDCEINT); + spider_net_refill_rx_chain(card); + show_error = 0; + break; + + /* invalid descriptor */ + case SPIDER_NET_GDDINVDINT: /* fallthrough */ + case SPIDER_NET_GDCINVDINT: /* fallthrough */ + case SPIDER_NET_GDBINVDINT: /* fallthrough */ + case SPIDER_NET_GDAINVDINT: + /* could happen when rx chain is full */ + spider_net_refill_rx_chain(card); + show_error = 0; + break; + + /* case SPIDER_NET_GDTRSERINT: problem, print a message */ + /* case SPIDER_NET_GDDRSERINT: problem, print a message */ + /* case SPIDER_NET_GDCRSERINT: problem, print a message */ + /* case SPIDER_NET_GDBRSERINT: problem, print a message */ + /* case SPIDER_NET_GDARSERINT: problem, print a message */ + /* case SPIDER_NET_GDSERINT: problem, print a message */ + /* case SPIDER_NET_GDTPTERINT: problem, print a message */ + /* case SPIDER_NET_GDDPTERINT: problem, print a message */ + /* case SPIDER_NET_GDCPTERINT: problem, print a message */ + /* case SPIDER_NET_GDBPTERINT: problem, print a message */ + /* case SPIDER_NET_GDAPTERINT: problem, print a message */ + default: + show_error = 1; + break; + } + + /* check GHIINT2STS ************************************/ + if (error_reg2) + for (i = 0; i < 32; i++) + if (error_reg2 & (1<<i)) + switch (i) + { + /* there is nothing we can (want to) do at this time. Log a + * message, we can switch on and off the specific values later on + case SPIDER_NET_GPROPERINT: + case SPIDER_NET_GMCTCRSNGINT: + case SPIDER_NET_GMCTLCOLINT: + case SPIDER_NET_GMCTTMOTINT: + case SPIDER_NET_GMCRCAERINT: + case SPIDER_NET_GMCRCALERINT: + case SPIDER_NET_GMCRALNERINT: + case SPIDER_NET_GMCROVRINT: + case SPIDER_NET_GMCRRNTINT: + case SPIDER_NET_GMCRRXERINT: + case SPIDER_NET_GTITCSERINT: + case SPIDER_NET_GTIFMTERINT: + case SPIDER_NET_GTIPKTRVKINT: + case SPIDER_NET_GTISPINGINT: + case SPIDER_NET_GTISADNGINT: + case SPIDER_NET_GTISPDNGINT: + case SPIDER_NET_GRIFMTERINT: + case SPIDER_NET_GRIPKTRVKINT: + case SPIDER_NET_GRISPINGINT: + case SPIDER_NET_GRISADNGINT: + case SPIDER_NET_GRISPDNGINT: + break; + */ + default: + break; + } + + if ((show_error) && (netif_msg_intr(card))) + pr_err("Got error interrupt, GHIINT0STS = 0x%08x, " + "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n", + status_reg, error_reg1, error_reg2); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1); + spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2); +} + +/** + * spider_net_interrupt - interrupt handler for spider_net + * @irq: interupt number + * @ptr: pointer to net_device + * @regs: PU registers + * + * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no + * interrupt found raised by card. + * + * This is the interrupt handler, that turns off + * interrupts for this device and makes the stack poll the driver + */ +static irqreturn_t +spider_net_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct net_device *netdev = ptr; + struct spider_net_card *card = netdev_priv(netdev); + u32 status_reg; + + status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); + + if (!status_reg) + return IRQ_NONE; + + if (status_reg & SPIDER_NET_TXINT) + spider_net_release_tx_chain(card, 0); + + if (status_reg & SPIDER_NET_RXINT ) { + spider_net_rx_irq_off(card); + netif_rx_schedule(netdev); + } + + /* we do this after rx and tx processing, as we want the tx chain + * processed to see, whether we should restart tx dma processing */ + spider_net_handle_error_irq(card, status_reg); + + /* clear interrupt sources */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * spider_net_poll_controller - artificial interrupt for netconsole etc. + * @netdev: interface device structure + * + * see Documentation/networking/netconsole.txt + */ +static void +spider_net_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + spider_net_interrupt(netdev->irq, netdev, NULL); + enable_irq(netdev->irq); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +/** + * spider_net_init_card - initializes the card + * @card: card structure + * + * spider_net_init_card initializes the card so that other registers can + * be used + */ +static void +spider_net_init_card(struct spider_net_card *card) +{ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); +} + +/** + * spider_net_enable_card - enables the card by setting all kinds of regs + * @card: card structure + * + * spider_net_enable_card sets a lot of SMMIO registers to enable the device + */ +static void +spider_net_enable_card(struct spider_net_card *card) +{ + int i; + /* the following array consists of (register),(value) pairs + * that are set in this function. A register of 0 ends the list */ + u32 regs[][2] = { + { SPIDER_NET_GRESUMINTNUM, 0 }, + { SPIDER_NET_GREINTNUM, 0 }, + + /* set interrupt frame number registers */ + /* clear the single DMA engine registers first */ + { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE }, + /* then set, what we really need */ + { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE }, + + /* timer counter registers and stuff */ + { SPIDER_NET_GFREECNNUM, 0 }, + { SPIDER_NET_GONETIMENUM, 0 }, + { SPIDER_NET_GTOUTFRMNUM, 0 }, + + /* RX mode setting */ + { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE }, + /* TX mode setting */ + { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE }, + /* IPSEC mode setting */ + { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE }, + + { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE }, + + { SPIDER_NET_GMRWOLCTRL, 0 }, + { SPIDER_NET_GTESTMD, 0 }, + + { SPIDER_NET_GMACINTEN, 0 }, + + /* flow control stuff */ + { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE }, + { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE }, + + { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE }, + { 0, 0} + }; + + i = 0; + while (regs[i][0]) { + spider_net_write_reg(card, regs[i][0], regs[i][1]); + i++; + } + + /* clear unicast filter table entries 1 to 14 */ + for (i = 1; i <= 14; i++) { + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8, + 0x00080000); + spider_net_write_reg(card, + SPIDER_NET_GMRUAFILnR + i * 8 + 4, + 0x00000000); + } + + spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000); + + spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); + + /* set chain tail adress for RX chains and + * enable DMA */ + spider_net_enable_rxchtails(card); + spider_net_enable_rxdmac(card); + + spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE); + + /* set chain tail adress for TX chain */ + spider_net_enable_txdmac(card); + + spider_net_write_reg(card, SPIDER_NET_GMACLENLMT, + SPIDER_NET_LENLMT_VALUE); + spider_net_write_reg(card, SPIDER_NET_GMACMODE, + SPIDER_NET_MACMODE_VALUE); + spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, + SPIDER_NET_OPMODE_VALUE); + + /* set interrupt mask registers */ + spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, + SPIDER_NET_INT0_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, + SPIDER_NET_INT1_MASK_VALUE); + spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, + SPIDER_NET_INT2_MASK_VALUE); +} + +/** + * spider_net_open - called upon ifonfig up + * @netdev: interface device structure + * + * returns 0 on success, <0 on failure + * + * spider_net_open allocates all the descriptors and memory needed for + * operation, sets up multicast list and enables interrupts + */ +int +spider_net_open(struct net_device *netdev) +{ + struct spider_net_card *card = netdev_priv(netdev); + int result; + + result = -ENOMEM; + if (spider_net_init_chain(card, &card->tx_chain, + card->descr, tx_descriptors)) + goto alloc_tx_failed; + if (spider_net_init_chain(card, &card->rx_chain, + card->descr + tx_descriptors, rx_descriptors)) + goto alloc_rx_failed; + + /* allocate rx skbs */ + if (spider_net_alloc_rx_skbs(card)) + goto alloc_skbs_failed; + + spider_net_set_multi(netdev); + + /* further enhancement: setup hw vlan, if needed */ + + result = -EBUSY; + if (request_irq(netdev->irq, spider_net_interrupt, + SA_SHIRQ, netdev->name, netdev)) + goto register_int_failed; + + spider_net_enable_card(card); + + netif_start_queue(netdev); + netif_carrier_on(netdev); + netif_poll_enable(netdev); + + return 0; + +register_int_failed: + spider_net_free_rx_chain_contents(card); +alloc_skbs_failed: + spider_net_free_chain(card, &card->rx_chain); +alloc_rx_failed: + spider_net_free_chain(card, &card->tx_chain); +alloc_tx_failed: + return result; +} + +/** + * spider_net_setup_phy - setup PHY + * @card: card structure + * + * returns 0 on success, <0 on failure + * + * spider_net_setup_phy is used as part of spider_net_probe. Sets + * the PHY to 1000 Mbps + **/ +static int +spider_net_setup_phy(struct spider_net_card *card) +{ + struct mii_phy *phy = &card->phy; + + spider_net_write_reg(card, SPIDER_NET_GDTDMASEL, + SPIDER_NET_DMASEL_VALUE); + spider_net_write_reg(card, SPIDER_NET_GPCCTRL, + SPIDER_NET_PHY_CTRL_VALUE); + phy->mii_id = 1; + phy->dev = card->netdev; + phy->mdio_read = spider_net_read_phy; + phy->mdio_write = spider_net_write_phy; + + mii_phy_probe(phy, phy->mii_id); + + if (phy->def->ops->setup_forced) + phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL); + + /* the following two writes could be moved to sungem_phy.c */ + /* enable fiber mode */ + spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020); + /* LEDs active in both modes, autosense prio = fiber */ + spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f); + + phy->def->ops->read_link(phy); + pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name, + phy->speed, phy->duplex==1 ? "Full" : "Half"); + + return 0; +} + +/** + * spider_net_download_firmware - loads firmware into the adapter + * @card: card structure + * @firmware: firmware pointer + * + * spider_net_download_firmware loads the firmware opened by + * spider_net_init_firmware into the adapter. + */ +static void +spider_net_download_firmware(struct spider_net_card *card, + const struct firmware *firmware) +{ + int sequencer, i; + u32 *fw_ptr = (u32 *)firmware->data; + + /* stop sequencers */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_STOP_SEQ_VALUE); + + for (sequencer = 0; sequencer < 6; sequencer++) { + spider_net_write_reg(card, + SPIDER_NET_GSnPRGADR + sequencer * 8, 0); + for (i = 0; i < SPIDER_NET_FIRMWARE_LEN; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, *fw_ptr); + fw_ptr++; + } + } + + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_RUN_SEQ_VALUE); +} + +/** + * spider_net_init_firmware - reads in firmware parts + * @card: card structure + * + * Returns 0 on success, <0 on failure + * + * spider_net_init_firmware opens the sequencer firmware and does some basic + * checks. This function opens and releases the firmware structure. A call + * to download the firmware is performed before the release. + * + * Firmware format + * =============== + * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being + * the program for each sequencer. Use the command + * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ + * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ + * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin + * + * to generate spider_fw.bin, if you have sequencer programs with something + * like the following contents for each sequencer: + * <ONE LINE COMMENT> + * <FIRST 4-BYTES-WORD FOR SEQUENCER> + * <SECOND 4-BYTES-WORD FOR SEQUENCER> + * ... + * <1024th 4-BYTES-WORD FOR SEQUENCER> + */ +static int +spider_net_init_firmware(struct spider_net_card *card) +{ + const struct firmware *firmware; + int err = -EIO; + + if (request_firmware(&firmware, + SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) < 0) { + if (netif_msg_probe(card)) + pr_err("Couldn't read in sequencer data file %s.\n", + SPIDER_NET_FIRMWARE_NAME); + firmware = NULL; + goto out; + } + + if (firmware->size != 6 * SPIDER_NET_FIRMWARE_LEN * sizeof(u32)) { + if (netif_msg_probe(card)) + pr_err("Invalid size of sequencer data file %s.\n", + SPIDER_NET_FIRMWARE_NAME); + goto out; + } + + spider_net_download_firmware(card, firmware); + + err = 0; +out: + release_firmware(firmware); + + return err; +} + +/** + * spider_net_workaround_rxramfull - work around firmware bug + * @card: card structure + * + * no return value + **/ +static void +spider_net_workaround_rxramfull(struct spider_net_card *card) +{ + int i, sequencer = 0; + + /* cancel reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + /* empty sequencer data */ + for (sequencer = 0; sequencer < 6; sequencer++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, 0x0); + for (i = 0; i < SPIDER_NET_FIRMWARE_LEN; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, 0x0); + } + } + + /* set sequencer operation */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe); + + /* reset */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); +} + +/** + * spider_net_tx_timeout_task - task scheduled by the watchdog timeout + * function (to be called not under interrupt status) + * @data: data, is interface device structure + * + * called as task when tx hangs, resets interface (if interface is up) + */ +static void +spider_net_tx_timeout_task(void *data) +{ + struct net_device *netdev = data; + struct spider_net_card *card = netdev_priv(netdev); + + if (!(netdev->flags & IFF_UP)) + goto out; + + netif_device_detach(netdev); + spider_net_stop(netdev); + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + if (spider_net_setup_phy(card)) + goto out; + if (spider_net_init_firmware(card)) + goto out; + + spider_net_open(netdev); + spider_net_kick_tx_dma(card, card->tx_chain.head); + netif_device_attach(netdev); + +out: + atomic_dec(&card->tx_timeout_task_counter); +} + +/** + * spider_net_tx_timeout - called when the tx timeout watchdog kicks in. + * @netdev: interface device structure + * + * called, if tx hangs. Schedules a task that resets the interface + */ +static void +spider_net_tx_timeout(struct net_device *netdev) +{ + struct spider_net_card *card; + + card = netdev_priv(netdev); + atomic_inc(&card->tx_timeout_task_counter); + if (netdev->flags & IFF_UP) + schedule_work(&card->tx_timeout_task); + else + atomic_dec(&card->tx_timeout_task_counter); +} + +/** + * spider_net_setup_netdev_ops - initialization of net_device operations + * @netdev: net_device structure + * + * fills out function pointers in the net_device structure + */ +static void +spider_net_setup_netdev_ops(struct net_device *netdev) +{ + netdev->open = &spider_net_open; + netdev->stop = &spider_net_stop; + netdev->hard_start_xmit = &spider_net_xmit; + netdev->get_stats = &spider_net_get_stats; + netdev->set_multicast_list = &spider_net_set_multi; + netdev->set_mac_address = &spider_net_set_mac; + netdev->change_mtu = &spider_net_change_mtu; + netdev->do_ioctl = &spider_net_do_ioctl; + /* tx watchdog */ + netdev->tx_timeout = &spider_net_tx_timeout; + netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT; + /* NAPI */ + netdev->poll = &spider_net_poll; + netdev->weight = SPIDER_NET_NAPI_WEIGHT; + /* HW VLAN */ + netdev->vlan_rx_register = &spider_net_vlan_rx_reg; + netdev->vlan_rx_add_vid = &spider_net_vlan_rx_add; + netdev->vlan_rx_kill_vid = &spider_net_vlan_rx_kill; +#ifdef CONFIG_NET_POLL_CONTROLLER + /* poll controller */ + netdev->poll_controller = &spider_net_poll_controller; +#endif /* CONFIG_NET_POLL_CONTROLLER */ + /* ethtool ops */ + netdev->ethtool_ops = &spider_net_ethtool_ops; +} + +/** + * spider_net_setup_netdev - initialization of net_device + * @card: card structure + * + * Returns 0 on success or <0 on failure + * + * spider_net_setup_netdev initializes the net_device structure + **/ +static int +spider_net_setup_netdev(struct spider_net_card *card) +{ + int result; + struct net_device *netdev = card->netdev; + struct device_node *dn; + struct sockaddr addr; + u8 *mac; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + pci_set_drvdata(card->pdev, netdev); + spin_lock_init(&card->intmask_lock); + netdev->irq = card->pdev->irq; + + card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT; + + spider_net_setup_netdev_ops(netdev); + + netdev->features = 0; + /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + * NETIF_F_HW_VLAN_FILTER */ + + netdev->irq = card->pdev->irq; + + dn = pci_device_to_OF_node(card->pdev); + if (!dn) + return -EIO; + + mac = (u8 *)get_property(dn, "local-mac-address", NULL); + if (!mac) + return -EIO; + memcpy(addr.sa_data, mac, ETH_ALEN); + + result = spider_net_set_mac(netdev, &addr); + if ((result) && (netif_msg_probe(card))) + pr_err("Failed to set MAC address: %i\n", result); + + result = register_netdev(netdev); + if (result) { + if (netif_msg_probe(card)) + pr_err("Couldn't register net_device: %i\n", + result); + return result; + } + + if (netif_msg_probe(card)) + pr_info("Initialized device %s.\n", netdev->name); + + return 0; +} + +/** + * spider_net_alloc_card - allocates net_device and card structure + * + * returns the card structure or NULL in case of errors + * + * the card and net_device structures are linked to each other + */ +static struct spider_net_card * +spider_net_alloc_card(void) +{ + struct net_device *netdev; + struct spider_net_card *card; + size_t alloc_size; + + alloc_size = sizeof (*card) + + sizeof (struct spider_net_descr) * rx_descriptors + + sizeof (struct spider_net_descr) * tx_descriptors; + netdev = alloc_etherdev(alloc_size); + if (!netdev) + return NULL; + + card = netdev_priv(netdev); + card->netdev = netdev; + card->msg_enable = SPIDER_NET_DEFAULT_MSG; + INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task, netdev); + init_waitqueue_head(&card->waitq); + atomic_set(&card->tx_timeout_task_counter, 0); + + return card; +} + +/** + * spider_net_undo_pci_setup - releases PCI ressources + * @card: card structure + * + * spider_net_undo_pci_setup releases the mapped regions + */ +static void +spider_net_undo_pci_setup(struct spider_net_card *card) +{ + iounmap(card->regs); + pci_release_regions(card->pdev); +} + +/** + * spider_net_setup_pci_dev - sets up the device in terms of PCI operations + * @card: card structure + * @pdev: PCI device + * + * Returns the card structure or NULL if any errors occur + * + * spider_net_setup_pci_dev initializes pdev and together with the + * functions called in spider_net_open configures the device so that + * data can be transferred over it + * The net_device structure is attached to the card structure, if the + * function returns without error. + **/ +static struct spider_net_card * +spider_net_setup_pci_dev(struct pci_dev *pdev) +{ + struct spider_net_card *card; + unsigned long mmio_start, mmio_len; + + if (pci_enable_device(pdev)) { + pr_err("Couldn't enable PCI device\n"); + return NULL; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + pr_err("Couldn't find proper PCI device base address.\n"); + goto out_disable_dev; + } + + if (pci_request_regions(pdev, spider_net_driver_name)) { + pr_err("Couldn't obtain PCI resources, aborting.\n"); + goto out_disable_dev; + } + + pci_set_master(pdev); + + card = spider_net_alloc_card(); + if (!card) { + pr_err("Couldn't allocate net_device structure, " + "aborting.\n"); + goto out_release_regions; + } + card->pdev = pdev; + + /* fetch base address and length of first resource */ + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + card->netdev->mem_start = mmio_start; + card->netdev->mem_end = mmio_start + mmio_len; + card->regs = ioremap(mmio_start, mmio_len); + + if (!card->regs) { + pr_err("Couldn't obtain PCI resources, aborting.\n"); + goto out_release_regions; + } + + return card; + +out_release_regions: + pci_release_regions(pdev); +out_disable_dev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return NULL; +} + +/** + * spider_net_probe - initialization of a device + * @pdev: PCI device + * @ent: entry in the device id list + * + * Returns 0 on success, <0 on failure + * + * spider_net_probe initializes pdev and registers a net_device + * structure for it. After that, the device can be ifconfig'ed up + **/ +static int __devinit +spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = -EIO; + struct spider_net_card *card; + + card = spider_net_setup_pci_dev(pdev); + if (!card) + goto out; + + spider_net_workaround_rxramfull(card); + spider_net_init_card(card); + + err = spider_net_setup_phy(card); + if (err) + goto out_undo_pci; + + err = spider_net_init_firmware(card); + if (err) + goto out_undo_pci; + + err = spider_net_setup_netdev(card); + if (err) + goto out_undo_pci; + + return 0; + +out_undo_pci: + spider_net_undo_pci_setup(card); + free_netdev(card->netdev); +out: + return err; +} + +/** + * spider_net_remove - removal of a device + * @pdev: PCI device + * + * Returns 0 on success, <0 on failure + * + * spider_net_remove is called to remove the device and unregisters the + * net_device + **/ +static void __devexit +spider_net_remove(struct pci_dev *pdev) +{ + struct net_device *netdev; + struct spider_net_card *card; + + netdev = pci_get_drvdata(pdev); + card = netdev_priv(netdev); + + wait_event(card->waitq, + atomic_read(&card->tx_timeout_task_counter) == 0); + + unregister_netdev(netdev); + + /* switch off card */ + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_STOP_VALUE); + spider_net_write_reg(card, SPIDER_NET_CKRCTRL, + SPIDER_NET_CKRCTRL_RUN_VALUE); + + spider_net_undo_pci_setup(card); + free_netdev(netdev); +} + +static struct pci_driver spider_net_driver = { + .owner = THIS_MODULE, + .name = spider_net_driver_name, + .id_table = spider_net_pci_tbl, + .probe = spider_net_probe, + .remove = __devexit_p(spider_net_remove) +}; + +/** + * spider_net_init - init function when the driver is loaded + * + * spider_net_init registers the device driver + */ +static int __init spider_net_init(void) +{ + if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) { + rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX; + pr_info("adjusting rx descriptors to %i.\n", rx_descriptors); + } + if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) { + tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX; + pr_info("adjusting tx descriptors to %i.\n", tx_descriptors); + } + + return pci_register_driver(&spider_net_driver); +} + +/** + * spider_net_cleanup - exit function when driver is unloaded + * + * spider_net_cleanup unregisters the device driver + */ +static void __exit spider_net_cleanup(void) +{ + pci_unregister_driver(&spider_net_driver); +} + +module_init(spider_net_init); +module_exit(spider_net_cleanup); diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h new file mode 100644 index 00000000000..22b2f234735 --- /dev/null +++ b/drivers/net/spider_net.h @@ -0,0 +1,469 @@ +/* + * Network device driver for Cell Processor-Based Blade + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPIDER_NET_H +#define _SPIDER_NET_H + +#include "sungem_phy.h" + +extern int spider_net_stop(struct net_device *netdev); +extern int spider_net_open(struct net_device *netdev); + +extern struct ethtool_ops spider_net_ethtool_ops; + +extern char spider_net_driver_name[]; + +#define SPIDER_NET_MAX_MTU 2308 +#define SPIDER_NET_MIN_MTU 64 + +#define SPIDER_NET_RXBUF_ALIGN 128 + +#define SPIDER_NET_RX_DESCRIPTORS_DEFAULT 64 +#define SPIDER_NET_RX_DESCRIPTORS_MIN 16 +#define SPIDER_NET_RX_DESCRIPTORS_MAX 256 + +#define SPIDER_NET_TX_DESCRIPTORS_DEFAULT 64 +#define SPIDER_NET_TX_DESCRIPTORS_MIN 16 +#define SPIDER_NET_TX_DESCRIPTORS_MAX 256 + +#define SPIDER_NET_RX_CSUM_DEFAULT 1 + +#define SPIDER_NET_WATCHDOG_TIMEOUT 5*HZ +#define SPIDER_NET_NAPI_WEIGHT 64 + +#define SPIDER_NET_FIRMWARE_LEN 1024 +#define SPIDER_NET_FIRMWARE_NAME "spider_fw.bin" + +/** spider_net SMMIO registers */ +#define SPIDER_NET_GHIINT0STS 0x00000000 +#define SPIDER_NET_GHIINT1STS 0x00000004 +#define SPIDER_NET_GHIINT2STS 0x00000008 +#define SPIDER_NET_GHIINT0MSK 0x00000010 +#define SPIDER_NET_GHIINT1MSK 0x00000014 +#define SPIDER_NET_GHIINT2MSK 0x00000018 + +#define SPIDER_NET_GRESUMINTNUM 0x00000020 +#define SPIDER_NET_GREINTNUM 0x00000024 + +#define SPIDER_NET_GFFRMNUM 0x00000028 +#define SPIDER_NET_GFAFRMNUM 0x0000002c +#define SPIDER_NET_GFBFRMNUM 0x00000030 +#define SPIDER_NET_GFCFRMNUM 0x00000034 +#define SPIDER_NET_GFDFRMNUM 0x00000038 + +/* clear them (don't use it) */ +#define SPIDER_NET_GFREECNNUM 0x0000003c +#define SPIDER_NET_GONETIMENUM 0x00000040 + +#define SPIDER_NET_GTOUTFRMNUM 0x00000044 + +#define SPIDER_NET_GTXMDSET 0x00000050 +#define SPIDER_NET_GPCCTRL 0x00000054 +#define SPIDER_NET_GRXMDSET 0x00000058 +#define SPIDER_NET_GIPSECINIT 0x0000005c +#define SPIDER_NET_GFTRESTRT 0x00000060 +#define SPIDER_NET_GRXDMAEN 0x00000064 +#define SPIDER_NET_GMRWOLCTRL 0x00000068 +#define SPIDER_NET_GPCWOPCMD 0x0000006c +#define SPIDER_NET_GPCROPCMD 0x00000070 +#define SPIDER_NET_GTTFRMCNT 0x00000078 +#define SPIDER_NET_GTESTMD 0x0000007c + +#define SPIDER_NET_GSINIT 0x00000080 +#define SPIDER_NET_GSnPRGADR 0x00000084 +#define SPIDER_NET_GSnPRGDAT 0x00000088 + +#define SPIDER_NET_GMACOPEMD 0x00000100 +#define SPIDER_NET_GMACLENLMT 0x00000108 +#define SPIDER_NET_GMACINTEN 0x00000118 +#define SPIDER_NET_GMACPHYCTRL 0x00000120 + +#define SPIDER_NET_GMACAPAUSE 0x00000154 +#define SPIDER_NET_GMACTXPAUSE 0x00000164 + +#define SPIDER_NET_GMACMODE 0x000001b0 +#define SPIDER_NET_GMACBSTLMT 0x000001b4 + +#define SPIDER_NET_GMACUNIMACU 0x000001c0 +#define SPIDER_NET_GMACUNIMACL 0x000001c8 + +#define SPIDER_NET_GMRMHFILnR 0x00000400 +#define SPIDER_NET_MULTICAST_HASHES 256 + +#define SPIDER_NET_GMRUAFILnR 0x00000500 +#define SPIDER_NET_GMRUA0FIL15R 0x00000578 + +/* RX DMA controller registers, all 0x00000a.. are for DMA controller A, + * 0x00000b.. for DMA controller B, etc. */ +#define SPIDER_NET_GDADCHA 0x00000a00 +#define SPIDER_NET_GDADMACCNTR 0x00000a04 +#define SPIDER_NET_GDACTDPA 0x00000a08 +#define SPIDER_NET_GDACTDCNT 0x00000a0c +#define SPIDER_NET_GDACDBADDR 0x00000a20 +#define SPIDER_NET_GDACDBSIZE 0x00000a24 +#define SPIDER_NET_GDACNEXTDA 0x00000a28 +#define SPIDER_NET_GDACCOMST 0x00000a2c +#define SPIDER_NET_GDAWBCOMST 0x00000a30 +#define SPIDER_NET_GDAWBRSIZE 0x00000a34 +#define SPIDER_NET_GDAWBVSIZE 0x00000a38 +#define SPIDER_NET_GDAWBTRST 0x00000a3c +#define SPIDER_NET_GDAWBTRERR 0x00000a40 + +/* TX DMA controller registers */ +#define SPIDER_NET_GDTDCHA 0x00000e00 +#define SPIDER_NET_GDTDMACCNTR 0x00000e04 +#define SPIDER_NET_GDTCDPA 0x00000e08 +#define SPIDER_NET_GDTDMASEL 0x00000e14 + +#define SPIDER_NET_ECMODE 0x00000f00 +/* clock and reset control register */ +#define SPIDER_NET_CKRCTRL 0x00000ff0 + +/** SCONFIG registers */ +#define SPIDER_NET_SCONFIG_IOACTE 0x00002810 + +/** hardcoded register values */ +#define SPIDER_NET_INT0_MASK_VALUE 0x3f7fe3ff +#define SPIDER_NET_INT1_MASK_VALUE 0xffffffff +/* no MAC aborts -> auto retransmission */ +#define SPIDER_NET_INT2_MASK_VALUE 0xfffffff1 + +/* clear counter when interrupt sources are cleared +#define SPIDER_NET_FRAMENUM_VALUE 0x0001f001 */ +/* we rely on flagged descriptor interrupts */ +#define SPIDER_NET_FRAMENUM_VALUE 0x00000000 +/* set this first, then the FRAMENUM_VALUE */ +#define SPIDER_NET_GFXFRAMES_VALUE 0x00000000 + +#define SPIDER_NET_STOP_SEQ_VALUE 0x00000000 +#define SPIDER_NET_RUN_SEQ_VALUE 0x0000007e + +#define SPIDER_NET_PHY_CTRL_VALUE 0x00040040 +/* #define SPIDER_NET_PHY_CTRL_VALUE 0x01070080*/ +#define SPIDER_NET_RXMODE_VALUE 0x00000011 +/* auto retransmission in case of MAC aborts */ +#define SPIDER_NET_TXMODE_VALUE 0x00010000 +#define SPIDER_NET_RESTART_VALUE 0x00000000 +#define SPIDER_NET_WOL_VALUE 0x00001111 +#if 0 +#define SPIDER_NET_WOL_VALUE 0x00000000 +#endif +#define SPIDER_NET_IPSECINIT_VALUE 0x00f000f8 + +/* pause frames: automatic, no upper retransmission count */ +/* outside loopback mode: ETOMOD signal dont matter, not connected */ +#define SPIDER_NET_OPMODE_VALUE 0x00000063 +/*#define SPIDER_NET_OPMODE_VALUE 0x001b0062*/ +#define SPIDER_NET_LENLMT_VALUE 0x00000908 + +#define SPIDER_NET_MACAPAUSE_VALUE 0x00000800 /* about 1 ms */ +#define SPIDER_NET_TXPAUSE_VALUE 0x00000000 + +#define SPIDER_NET_MACMODE_VALUE 0x00000001 +#define SPIDER_NET_BURSTLMT_VALUE 0x00000200 /* about 16 us */ + +/* 1(0) enable r/tx dma + * 0000000 fixed to 0 + * + * 000000 fixed to 0 + * 0(1) en/disable descr writeback on force end + * 0(1) force end + * + * 000000 fixed to 0 + * 00 burst alignment: 128 bytes + * + * 00000 fixed to 0 + * 0 descr writeback size 32 bytes + * 0(1) descr chain end interrupt enable + * 0(1) descr status writeback enable */ + +/* to set RX_DMA_EN */ +#define SPIDER_NET_DMA_RX_VALUE 0x80000000 +#define SPIDER_NET_DMA_RX_FEND_VALUE 0x00030003 +/* to set TX_DMA_EN */ +#define SPIDER_NET_DMA_TX_VALUE 0x80000000 +#define SPIDER_NET_DMA_TX_FEND_VALUE 0x00030003 + +/* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */ +#define SPIDER_NET_UA_DESCR_VALUE 0x00080000 +#define SPIDER_NET_PROMISC_VALUE 0x00080000 +#define SPIDER_NET_NONPROMISC_VALUE 0x00000000 + +#define SPIDER_NET_DMASEL_VALUE 0x00000001 + +#define SPIDER_NET_ECMODE_VALUE 0x00000000 + +#define SPIDER_NET_CKRCTRL_RUN_VALUE 0x1fff010f +#define SPIDER_NET_CKRCTRL_STOP_VALUE 0x0000010f + +#define SPIDER_NET_SBIMSTATE_VALUE 0x00000000 +#define SPIDER_NET_SBTMSTATE_VALUE 0x00000000 + +/* SPIDER_NET_GHIINT0STS bits, in reverse order so that they can be used + * with 1 << SPIDER_NET_... */ +enum spider_net_int0_status { + SPIDER_NET_GPHYINT = 0, + SPIDER_NET_GMAC2INT, + SPIDER_NET_GMAC1INT, + SPIDER_NET_GIPSINT, + SPIDER_NET_GFIFOINT, + SPIDER_NET_GDMACINT, + SPIDER_NET_GSYSINT, + SPIDER_NET_GPWOPCMPINT, + SPIDER_NET_GPROPCMPINT, + SPIDER_NET_GPWFFINT, + SPIDER_NET_GRMDADRINT, + SPIDER_NET_GRMARPINT, + SPIDER_NET_GRMMPINT, + SPIDER_NET_GDTDEN0INT, + SPIDER_NET_GDDDEN0INT, + SPIDER_NET_GDCDEN0INT, + SPIDER_NET_GDBDEN0INT, + SPIDER_NET_GDADEN0INT, + SPIDER_NET_GDTFDCINT, + SPIDER_NET_GDDFDCINT, + SPIDER_NET_GDCFDCINT, + SPIDER_NET_GDBFDCINT, + SPIDER_NET_GDAFDCINT, + SPIDER_NET_GTTEDINT, + SPIDER_NET_GDTDCEINT, + SPIDER_NET_GRFDNMINT, + SPIDER_NET_GRFCNMINT, + SPIDER_NET_GRFBNMINT, + SPIDER_NET_GRFANMINT, + SPIDER_NET_GRFNMINT, + SPIDER_NET_G1TMCNTINT, + SPIDER_NET_GFREECNTINT +}; +/* GHIINT1STS bits */ +enum spider_net_int1_status { + SPIDER_NET_GTMFLLINT = 0, + SPIDER_NET_GRMFLLINT, + SPIDER_NET_GTMSHTINT, + SPIDER_NET_GDTINVDINT, + SPIDER_NET_GRFDFLLINT, + SPIDER_NET_GDDDCEINT, + SPIDER_NET_GDDINVDINT, + SPIDER_NET_GRFCFLLINT, + SPIDER_NET_GDCDCEINT, + SPIDER_NET_GDCINVDINT, + SPIDER_NET_GRFBFLLINT, + SPIDER_NET_GDBDCEINT, + SPIDER_NET_GDBINVDINT, + SPIDER_NET_GRFAFLLINT, + SPIDER_NET_GDADCEINT, + SPIDER_NET_GDAINVDINT, + SPIDER_NET_GDTRSERINT, + SPIDER_NET_GDDRSERINT, + SPIDER_NET_GDCRSERINT, + SPIDER_NET_GDBRSERINT, + SPIDER_NET_GDARSERINT, + SPIDER_NET_GDSERINT, + SPIDER_NET_GDTPTERINT, + SPIDER_NET_GDDPTERINT, + SPIDER_NET_GDCPTERINT, + SPIDER_NET_GDBPTERINT, + SPIDER_NET_GDAPTERINT +}; +/* GHIINT2STS bits */ +enum spider_net_int2_status { + SPIDER_NET_GPROPERINT = 0, + SPIDER_NET_GMCTCRSNGINT, + SPIDER_NET_GMCTLCOLINT, + SPIDER_NET_GMCTTMOTINT, + SPIDER_NET_GMCRCAERINT, + SPIDER_NET_GMCRCALERINT, + SPIDER_NET_GMCRALNERINT, + SPIDER_NET_GMCROVRINT, + SPIDER_NET_GMCRRNTINT, + SPIDER_NET_GMCRRXERINT, + SPIDER_NET_GTITCSERINT, + SPIDER_NET_GTIFMTERINT, + SPIDER_NET_GTIPKTRVKINT, + SPIDER_NET_GTISPINGINT, + SPIDER_NET_GTISADNGINT, + SPIDER_NET_GTISPDNGINT, + SPIDER_NET_GRIFMTERINT, + SPIDER_NET_GRIPKTRVKINT, + SPIDER_NET_GRISPINGINT, + SPIDER_NET_GRISADNGINT, + SPIDER_NET_GRISPDNGINT +}; + +#define SPIDER_NET_TXINT ( (1 << SPIDER_NET_GTTEDINT) | \ + (1 << SPIDER_NET_GDTDCEINT) | \ + (1 << SPIDER_NET_GDTFDCINT) ) + +/* we rely on flagged descriptor interrupts*/ +#define SPIDER_NET_RXINT ( (1 << SPIDER_NET_GDAFDCINT) | \ + (1 << SPIDER_NET_GRMFLLINT) ) + +#define SPIDER_NET_GPREXEC 0x80000000 +#define SPIDER_NET_GPRDAT_MASK 0x0000ffff + +/* descriptor bits + * + * 1010 descriptor ready + * 0 descr in middle of chain + * 000 fixed to 0 + * + * 0 no interrupt on completion + * 000 fixed to 0 + * 1 no ipsec processing + * 1 last descriptor for this frame + * 00 no checksum + * 10 tcp checksum + * 11 udp checksum + * + * 00 fixed to 0 + * 0 fixed to 0 + * 0 no interrupt on response errors + * 0 no interrupt on invalid descr + * 0 no interrupt on dma process termination + * 0 no interrupt on descr chain end + * 0 no interrupt on descr complete + * + * 000 fixed to 0 + * 0 response error interrupt status + * 0 invalid descr status + * 0 dma termination status + * 0 descr chain end status + * 0 descr complete status */ +#define SPIDER_NET_DMAC_CMDSTAT_NOCS 0xa00c0000 +#define SPIDER_NET_DMAC_CMDSTAT_TCPCS 0xa00e0000 +#define SPIDER_NET_DMAC_CMDSTAT_UDPCS 0xa00f0000 +#define SPIDER_NET_DESCR_IND_PROC_SHIFT 28 +#define SPIDER_NET_DESCR_IND_PROC_MASKO 0x0fffffff + +/* descr ready, descr is in middle of chain, get interrupt on completion */ +#define SPIDER_NET_DMAC_RX_CARDOWNED 0xa0800000 + +/* multicast is no problem */ +#define SPIDER_NET_DATA_ERROR_MASK 0xffffbfff + +enum spider_net_descr_status { + SPIDER_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */ + SPIDER_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */ + SPIDER_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */ + SPIDER_NET_DESCR_FRAME_END = 0x04, /* used in rx */ + SPIDER_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */ + SPIDER_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */ + SPIDER_NET_DESCR_NOT_IN_USE /* any other value */ +}; + +struct spider_net_descr { + /* as defined by the hardware */ + dma_addr_t buf_addr; + u32 buf_size; + dma_addr_t next_descr_addr; + u32 dmac_cmd_status; + u32 result_size; + u32 valid_size; /* all zeroes for tx */ + u32 data_status; + u32 data_error; /* all zeroes for tx */ + + /* used in the driver */ + struct sk_buff *skb; + dma_addr_t bus_addr; + struct spider_net_descr *next; + struct spider_net_descr *prev; +} __attribute__((aligned(32))); + +struct spider_net_descr_chain { + /* we walk from tail to head */ + struct spider_net_descr *head; + struct spider_net_descr *tail; +}; + +/* descriptor data_status bits */ +#define SPIDER_NET_RXIPCHK 29 +#define SPIDER_NET_TCPUDPIPCHK 28 +#define SPIDER_NET_DATA_STATUS_CHK_MASK (1 << SPIDER_NET_RXIPCHK | \ + 1 << SPIDER_NET_TCPUDPIPCHK) + +#define SPIDER_NET_VLAN_PACKET 21 + +/* descriptor data_error bits */ +#define SPIDER_NET_RXIPCHKERR 27 +#define SPIDER_NET_RXTCPCHKERR 26 +#define SPIDER_NET_DATA_ERROR_CHK_MASK (1 << SPIDER_NET_RXIPCHKERR | \ + 1 << SPIDER_NET_RXTCPCHKERR) + +/* the cases we don't pass the packet to the stack */ +#define SPIDER_NET_DESTROY_RX_FLAGS 0x70138000 + +#define SPIDER_NET_DESCR_SIZE 32 + +/* this will be bigger some time */ +struct spider_net_options { + int rx_csum; /* for rx: if 0 ip_summed=NONE, + if 1 and hw has verified, ip_summed=UNNECESSARY */ +}; + +#define SPIDER_NET_DEFAULT_MSG ( NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR | \ + NETIF_MSG_TX_QUEUED | \ + NETIF_MSG_INTR | \ + NETIF_MSG_TX_DONE | \ + NETIF_MSG_RX_STATUS | \ + NETIF_MSG_PKTDATA | \ + NETIF_MSG_HW | \ + NETIF_MSG_WOL ) + +struct spider_net_card { + struct net_device *netdev; + struct pci_dev *pdev; + struct mii_phy phy; + + void __iomem *regs; + + struct spider_net_descr_chain tx_chain; + struct spider_net_descr_chain rx_chain; + spinlock_t chain_lock; + + struct net_device_stats netdev_stats; + + struct spider_net_options options; + + spinlock_t intmask_lock; + + struct work_struct tx_timeout_task; + atomic_t tx_timeout_task_counter; + wait_queue_head_t waitq; + + /* for ethtool */ + int msg_enable; + + struct spider_net_descr descr[0]; +}; + +#define pr_err(fmt,arg...) \ + printk(KERN_ERR fmt ,##arg) + +#endif diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/spider_net_ethtool.c new file mode 100644 index 00000000000..d42e60ba74c --- /dev/null +++ b/drivers/net/spider_net_ethtool.c @@ -0,0 +1,126 @@ +/* + * Network device driver for Cell Processor-Based Blade + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> + +#include "spider_net.h" + +static int +spider_net_ethtool_get_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct spider_net_card *card; + card = netdev_priv(netdev); + + cmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + cmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + cmd->port = PORT_FIBRE; + cmd->speed = card->phy.speed; + cmd->duplex = DUPLEX_FULL; + + return 0; +} + +static void +spider_net_ethtool_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct spider_net_card *card; + card = netdev_priv(netdev); + + /* clear and fill out info */ + memset(drvinfo, 0, sizeof(struct ethtool_drvinfo)); + strncpy(drvinfo->driver, spider_net_driver_name, 32); + strncpy(drvinfo->version, "0.1", 32); + strcpy(drvinfo->fw_version, "no information"); + strncpy(drvinfo->bus_info, pci_name(card->pdev), 32); +} + +static void +spider_net_ethtool_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wolinfo) +{ + /* no support for wol */ + wolinfo->supported = 0; + wolinfo->wolopts = 0; +} + +static u32 +spider_net_ethtool_get_msglevel(struct net_device *netdev) +{ + struct spider_net_card *card; + card = netdev_priv(netdev); + return card->msg_enable; +} + +static void +spider_net_ethtool_set_msglevel(struct net_device *netdev, + u32 level) +{ + struct spider_net_card *card; + card = netdev_priv(netdev); + card->msg_enable = level; +} + +static int +spider_net_ethtool_nway_reset(struct net_device *netdev) +{ + if (netif_running(netdev)) { + spider_net_stop(netdev); + spider_net_open(netdev); + } + return 0; +} + +static u32 +spider_net_ethtool_get_rx_csum(struct net_device *netdev) +{ + struct spider_net_card *card = netdev->priv; + + return card->options.rx_csum; +} + +static int +spider_net_ethtool_set_rx_csum(struct net_device *netdev, u32 n) +{ + struct spider_net_card *card = netdev->priv; + + card->options.rx_csum = n; + return 0; +} + +struct ethtool_ops spider_net_ethtool_ops = { + .get_settings = spider_net_ethtool_get_settings, + .get_drvinfo = spider_net_ethtool_get_drvinfo, + .get_wol = spider_net_ethtool_get_wol, + .get_msglevel = spider_net_ethtool_get_msglevel, + .set_msglevel = spider_net_ethtool_set_msglevel, + .nway_reset = spider_net_ethtool_nway_reset, + .get_rx_csum = spider_net_ethtool_get_rx_csum, + .set_rx_csum = spider_net_ethtool_set_rx_csum, +}; + diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c index 1f43bbfbc1c..5c8fcd40ef4 100644 --- a/drivers/net/sun3lance.c +++ b/drivers/net/sun3lance.c @@ -162,7 +162,7 @@ struct lance_private { #define MEM lp->mem #define DREG lp->iobase[0] #define AREG lp->iobase[1] -#define REGA(a) ( AREG = (a), DREG ) +#define REGA(a) (*( AREG = (a), &DREG )) /* Definitions for the Lance */ diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 2608e7a3d21..3f67a42e850 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -948,6 +948,7 @@ static irqreturn_t gem_interrupt(int irq, void *dev_id, struct pt_regs *regs) u32 gem_status = readl(gp->regs + GREG_STAT); if (gem_status == 0) { + netif_poll_enable(dev); spin_unlock_irqrestore(&gp->lock, flags); return IRQ_NONE; } diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h index 7143fd7cf3f..ff8ae5f7997 100644 --- a/drivers/net/sungem.h +++ b/drivers/net/sungem.h @@ -1020,7 +1020,7 @@ struct gem { struct gem_init_block *init_block; struct sk_buff *rx_skbs[RX_RING_SIZE]; - struct sk_buff *tx_skbs[RX_RING_SIZE]; + struct sk_buff *tx_skbs[TX_RING_SIZE]; dma_addr_t gblock_dvma; struct pci_dev *pdev; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index af8263a1580..dc57352e5a9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -36,6 +36,7 @@ #include <linux/ip.h> #include <linux/tcp.h> #include <linux/workqueue.h> +#include <linux/prefetch.h> #include <net/checksum.h> @@ -66,8 +67,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.37" -#define DRV_MODULE_RELDATE "August 25, 2005" +#define DRV_MODULE_VERSION "3.39" +#define DRV_MODULE_RELDATE "September 5, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -121,12 +122,9 @@ TG3_RX_RCB_RING_SIZE(tp)) #define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \ TG3_TX_RING_SIZE) -#define TX_RING_GAP(TP) \ - (TG3_TX_RING_SIZE - (TP)->tx_pending) #define TX_BUFFS_AVAIL(TP) \ - (((TP)->tx_cons <= (TP)->tx_prod) ? \ - (TP)->tx_cons + (TP)->tx_pending - (TP)->tx_prod : \ - (TP)->tx_cons - (TP)->tx_prod - TX_RING_GAP(TP)) + ((TP)->tx_pending - \ + (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1))) #define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1)) #define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64) @@ -490,7 +488,8 @@ static void tg3_disable_ints(struct tg3 *tp) static inline void tg3_cond_int(struct tg3 *tp) { - if (tp->hw_status->status & SD_STATUS_UPDATED) + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) && + (tp->hw_status->status & SD_STATUS_UPDATED)) tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); } @@ -2880,9 +2879,13 @@ static void tg3_tx(struct tg3 *tp) tp->tx_cons = sw_idx; - if (netif_queue_stopped(tp->dev) && - (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)) - netif_wake_queue(tp->dev); + if (unlikely(netif_queue_stopped(tp->dev))) { + spin_lock(&tp->tx_lock); + if (netif_queue_stopped(tp->dev) && + (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)) + netif_wake_queue(tp->dev); + spin_unlock(&tp->tx_lock); + } } /* Returns size of skb allocated or < 0 on error. @@ -3198,9 +3201,7 @@ static int tg3_poll(struct net_device *netdev, int *budget) /* run TX completion thread */ if (sblk->idx[0].tx_consumer != tp->tx_cons) { - spin_lock(&tp->tx_lock); tg3_tx(tp); - spin_unlock(&tp->tx_lock); } /* run RX thread, within the bounds set by NAPI. @@ -3220,18 +3221,17 @@ static int tg3_poll(struct net_device *netdev, int *budget) netdev->quota -= work_done; } - if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) { tp->last_tag = sblk->status_tag; - rmb(); - sblk->status &= ~SD_STATUS_UPDATED; + rmb(); + } else + sblk->status &= ~SD_STATUS_UPDATED; /* if no more work, tell net stack and NIC we're done */ done = !tg3_has_work(tp); if (done) { - spin_lock(&tp->lock); netif_rx_complete(netdev); tg3_restart_ints(tp); - spin_unlock(&tp->lock); } return (done ? 0 : 1); @@ -3279,8 +3279,9 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); - struct tg3_hw_status *sblk = tp->hw_status; + prefetch(tp->hw_status); + prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]); /* * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. @@ -3289,19 +3290,9 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); - tp->last_tag = sblk->status_tag; - rmb(); - if (tg3_irq_sync(tp)) - goto out; - sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) + if (likely(!tg3_irq_sync(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ - else { - /* No work, re-enable interrupts. */ - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - tp->last_tag << 24); - } -out: + return IRQ_RETVAL(1); } @@ -3331,9 +3322,10 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (tg3_irq_sync(tp)) goto out; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) + if (likely(tg3_has_work(tp))) { + prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]); netif_rx_schedule(dev); /* schedule NAPI poll */ - else { + } else { /* No work, shared interrupt perhaps? re-enable * interrupts, and flush that PCI write */ @@ -3359,7 +3351,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r * Reading the PCI State register will confirm whether the * interrupt is ours and will flush the status block. */ - if ((sblk->status & SD_STATUS_UPDATED) || + if ((sblk->status_tag != tp->last_tag) || !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { /* * writing any value to intr-mbox-0 clears PCI INTA# and @@ -3370,19 +3362,17 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); - tp->last_tag = sblk->status_tag; - rmb(); if (tg3_irq_sync(tp)) goto out; - sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) - netif_rx_schedule(dev); /* schedule NAPI poll */ - else { - /* no work, shared interrupt perhaps? re-enable - * interrupts, and flush that PCI write + if (netif_rx_schedule_prep(dev)) { + prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]); + /* Update last_tag to mark that this status has been + * seen. Because interrupt may be shared, we may be + * racing with tg3_poll(), so only update last_tag + * if tg3_poll() is not scheduled. */ - tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - tp->last_tag << 24); + tp->last_tag = sblk->status_tag; + __netif_rx_schedule(dev); } } else { /* shared interrupt */ handled = 0; @@ -3716,8 +3706,11 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1)) + if (TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1)) { netif_stop_queue(dev); + if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + netif_wake_queue(tp->dev); + } out_unlock: mmiowb(); @@ -5960,7 +5953,7 @@ static int tg3_reset_hw(struct tg3 *tp) tw32(MAC_LED_CTRL, tp->led_ctrl); tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB); - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) { tw32_f(MAC_RX_MODE, RX_MODE_RESET); udelay(10); } @@ -6242,6 +6235,7 @@ static int tg3_test_interrupt(struct tg3 *tp) if (err) return err; + tp->hw_status->status &= ~SD_STATUS_UPDATED; tg3_enable_ints(tp); tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | @@ -7557,6 +7551,38 @@ static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf) } } +static int tg3_phys_id(struct net_device *dev, u32 data) +{ + struct tg3 *tp = netdev_priv(dev); + int i; + + if (!netif_running(tp->dev)) + return -EAGAIN; + + if (data == 0) + data = 2; + + for (i = 0; i < (data * 2); i++) { + if ((i % 2) == 0) + tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE | + LED_CTRL_1000MBPS_ON | + LED_CTRL_100MBPS_ON | + LED_CTRL_10MBPS_ON | + LED_CTRL_TRAFFIC_OVERRIDE | + LED_CTRL_TRAFFIC_BLINK | + LED_CTRL_TRAFFIC_LED); + + else + tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE | + LED_CTRL_TRAFFIC_OVERRIDE); + + if (msleep_interruptible(500)) + break; + } + tw32(MAC_LED_CTRL, tp->led_ctrl); + return 0; +} + static void tg3_get_ethtool_stats (struct net_device *dev, struct ethtool_stats *estats, u64 *tmp_stats) { @@ -7616,7 +7642,7 @@ static int tg3_test_link(struct tg3 *tp) if (!netif_running(tp->dev)) return -ENODEV; - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) max = TG3_SERDES_TIMEOUT_SEC; else max = TG3_COPPER_TIMEOUT_SEC; @@ -7901,9 +7927,12 @@ static int tg3_test_memory(struct tg3 *tp) return err; } -static int tg3_test_loopback(struct tg3 *tp) +#define TG3_MAC_LOOPBACK 0 +#define TG3_PHY_LOOPBACK 1 + +static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) { - u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key; + u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key; u32 desc_idx; struct sk_buff *skb, *rx_skb; u8 *tx_data; @@ -7911,18 +7940,26 @@ static int tg3_test_loopback(struct tg3 *tp) int num_pkts, tx_len, rx_len, i, err; struct tg3_rx_buffer_desc *desc; - if (!netif_running(tp->dev)) - return -ENODEV; + if (loopback_mode == TG3_MAC_LOOPBACK) { + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | + MAC_MODE_PORT_MODE_GMII; + tw32(MAC_MODE, mac_mode); + } else if (loopback_mode == TG3_PHY_LOOPBACK) { + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII; + if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) + mac_mode &= ~MAC_MODE_LINK_POLARITY; + tw32(MAC_MODE, mac_mode); + + tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX | + BMCR_SPEED1000); + } + else + return -EINVAL; err = -EIO; - tg3_reset_hw(tp); - - mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | - MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | - MAC_MODE_PORT_MODE_GMII; - tw32(MAC_MODE, mac_mode); - tx_len = 1514; skb = dev_alloc_skb(tx_len); tx_data = skb_put(skb, tx_len); @@ -7943,15 +7980,15 @@ static int tg3_test_loopback(struct tg3 *tp) rx_start_idx = tp->hw_status->idx[0].rx_producer; - send_idx = 0; num_pkts = 0; - tg3_set_txd(tp, send_idx, map, tx_len, 0, 1); + tg3_set_txd(tp, tp->tx_prod, map, tx_len, 0, 1); - send_idx++; + tp->tx_prod++; num_pkts++; - tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx); + tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, + tp->tx_prod); tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW); udelay(10); @@ -7964,7 +8001,7 @@ static int tg3_test_loopback(struct tg3 *tp) tx_idx = tp->hw_status->idx[0].tx_consumer; rx_idx = tp->hw_status->idx[0].rx_producer; - if ((tx_idx == send_idx) && + if ((tx_idx == tp->tx_prod) && (rx_idx == (rx_start_idx + num_pkts))) break; } @@ -7972,7 +8009,7 @@ static int tg3_test_loopback(struct tg3 *tp) pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); - if (tx_idx != send_idx) + if (tx_idx != tp->tx_prod) goto out; if (rx_idx != rx_start_idx + num_pkts) @@ -8008,6 +8045,30 @@ out: return err; } +#define TG3_MAC_LOOPBACK_FAILED 1 +#define TG3_PHY_LOOPBACK_FAILED 2 +#define TG3_LOOPBACK_FAILED (TG3_MAC_LOOPBACK_FAILED | \ + TG3_PHY_LOOPBACK_FAILED) + +static int tg3_test_loopback(struct tg3 *tp) +{ + int err = 0; + + if (!netif_running(tp->dev)) + return TG3_LOOPBACK_FAILED; + + tg3_reset_hw(tp); + + if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK)) + err |= TG3_MAC_LOOPBACK_FAILED; + if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { + if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK)) + err |= TG3_PHY_LOOPBACK_FAILED; + } + + return err; +} + static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *data) { @@ -8048,10 +8109,8 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, etest->flags |= ETH_TEST_FL_FAILED; data[3] = 1; } - if (tg3_test_loopback(tp) != 0) { + if ((data[4] = tg3_test_loopback(tp)) != 0) etest->flags |= ETH_TEST_FL_FAILED; - data[4] = 1; - } tg3_full_unlock(tp); @@ -8239,6 +8298,7 @@ static struct ethtool_ops tg3_ethtool_ops = { .self_test_count = tg3_get_test_count, .self_test = tg3_self_test, .get_strings = tg3_get_strings, + .phys_id = tg3_phys_id, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, .get_coalesce = tg3_get_coalesce, @@ -8303,7 +8363,8 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp) tw32(NVRAM_CFG1, nvcfg1); } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) { + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) { switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) { case FLASH_VENDOR_ATMEL_FLASH_BUFFERED: tp->nvram_jedecnum = JEDEC_ATMEL; @@ -8717,8 +8778,9 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len, if (i == (len - 4)) nvram_cmd |= NVRAM_CMD_LAST; - if ((tp->nvram_jedecnum == JEDEC_ST) && - (nvram_cmd & NVRAM_CMD_FIRST)) { + if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752) && + (tp->nvram_jedecnum == JEDEC_ST) && + (nvram_cmd & NVRAM_CMD_FIRST)) { if ((ret = tg3_nvram_exec_cmd(tp, NVRAM_CMD_WREN | NVRAM_CMD_GO | diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index e2cdaf87620..8c9634a98c1 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -135,6 +135,18 @@ config DM9102 <file:Documentation/networking/net-modules.txt>. The module will be called dmfe. +config ULI526X + tristate "ULi M526x controller support" + depends on NET_TULIP && PCI + select CRC32 + ---help--- + This driver is for ULi M5261/M5263 10/100M Ethernet Controller + (<http://www.uli.com.tw/>). + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will + be called uli526x. + config PCMCIA_XIRCOM tristate "Xircom CardBus support (new driver)" depends on NET_TULIP && CARDBUS diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 8bb9b468397..451090d6fcc 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o obj-$(CONFIG_DE2104X) += de2104x.o obj-$(CONFIG_TULIP) += tulip.o obj-$(CONFIG_DE4X5) += de4x5.o +obj-$(CONFIG_ULI526X) += uli526x.o # Declare multi-part drivers. diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index fc353e348f9..a22d00198e4 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1934,7 +1934,7 @@ static int __init de_init_one (struct pci_dev *pdev, struct de_private *de; int rc; void __iomem *regs; - long pciaddr; + unsigned long pciaddr; static int board_idx = -1; board_idx++; diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index e26c31f944b..f53396fe79c 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location) return retval & 0xffff; } - if(tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x08000000; - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - mdio_delay(); - if(ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - retval = ioread32(ioaddr + CSR10); - spin_unlock_irqrestore(&tp->mii_lock, flags); - return retval & 0xFFFF; - } /* Establish sync by sending at least 32 logic ones. */ for (i = 32; i >= 0; i--) { iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); @@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) spin_unlock_irqrestore(&tp->mii_lock, flags); return; } - if (tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF); - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - if (ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return; - } /* Establish sync by sending 32 logic ones. */ for (i = 32; i >= 0; i--) { diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 69156828355..e058a9fbfe8 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -39,7 +39,6 @@ void tulip_timer(unsigned long data) case MX98713: case COMPEX9881: case DM910X: - case ULI526X: default: { struct medialeaf *mleaf; unsigned char *p; diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 20346d847d9..05d2d96f7be 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -88,7 +88,6 @@ enum chips { I21145, DM910X, CONEXANT, - ULI526X }; @@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp) static inline void tulip_restart_rxtx(struct tulip_private *tp) { - if(!(tp->chip_id == ULI526X && - (tp->revision == 0x40 || tp->revision == 0x50))) { - tulip_stop_rxtx(tp); - udelay(5); - } + tulip_stop_rxtx(tp); + udelay(5); tulip_start_rxtx(tp); } diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d45d8f56e5b..6266a9a7e6e 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = { { "Conexant LANfinity", 256, 0x0001ebef, HAS_MII | HAS_ACPI, tulip_timer }, - /* ULi526X */ - { "ULi M5261/M5263", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer }, }; @@ -239,10 +236,9 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ - { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ + { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, tulip_pci_tbl); @@ -522,7 +518,7 @@ static void tulip_tx_timeout(struct net_device *dev) dev->name); } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 - || tp->chip_id == DM910X || tp->chip_id == ULI526X) { + || tp->chip_id == DM910X) { printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), @@ -1103,18 +1099,16 @@ static void set_rx_mode(struct net_device *dev) entry = tp->cur_tx++ % TX_RING_SIZE; if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. Don't do - this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; - tp->tx_ring[entry].buffer1 = 0; - /* Must set DescOwned later to avoid race with chip */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } + /* Avoid a chip errata by prefixing a dummy entry. */ + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + } tp->tx_buffers[entry].skb = NULL; @@ -1235,10 +1229,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev) { if (pdev->vendor == 0x1282 && pdev->device == 0x9102) return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5261) - return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5263) - return 1; return 0; } @@ -1680,7 +1670,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, switch (chip_idx) { case DC21140: case DM910X: - case ULI526X: default: if (tp->mtable) iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c new file mode 100644 index 00000000000..1a431633625 --- /dev/null +++ b/drivers/net/tulip/uli526x.c @@ -0,0 +1,1749 @@ +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + +*/ + +#define DRV_NAME "uli526x" +#define DRV_VERSION "0.9.3" +#define DRV_RELDATE "2005-7-29" + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> + +#include <asm/processor.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ +#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ + +#define ULI526X_IO_SIZE 0x100 +#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define ULI526X_RESET 1 +#define CR0_DEFAULT 0 +#define CR6_DEFAULT 0x22200000 +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define ULI5261_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 + +#define ULI526X_10MHF 0 +#define ULI526X_100MHF 1 +#define ULI526X_10MFD 4 +#define ULI526X_100MFD 5 +#define ULI526X_AUTO 8 + +#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ +#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ +#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ +#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ +#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ +#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ +#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ + +#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) + +#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct uli526x_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + struct net_device *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + struct timer_list timer; + + /* System defined statistic counter */ + struct net_device_stats stats; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; + u8 init; +}; + +enum uli526x_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum uli526x_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static char version[] __devinitdata = + KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static int uli526x_debug; +static unsigned char uli526x_media_mode = ULI526X_AUTO; +static u32 uli526x_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static unsigned char mode = 8; + +/* function declaration ------------------------------------- */ +static int uli526x_open(struct net_device *); +static int uli526x_start_xmit(struct sk_buff *, struct net_device *); +static int uli526x_stop(struct net_device *); +static struct net_device_stats * uli526x_get_stats(struct net_device *); +static void uli526x_set_filter_mode(struct net_device *); +static struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long, int); +static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *); +static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); +static void allocate_rx_buffer(struct uli526x_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct net_device *, int); +static u16 phy_read(unsigned long, u8, u8, u32); +static u16 phy_readby_cr10(unsigned long, u8, u8); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_writeby_cr10(unsigned long, u8, u8, u16); +static void phy_write_1bit(unsigned long, u32, u32); +static u16 phy_read_1bit(unsigned long, u32); +static u8 uli526x_sense_speed(struct uli526x_board_info *); +static void uli526x_process_mode(struct uli526x_board_info *); +static void uli526x_timer(unsigned long); +static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); +static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); +static void uli526x_dynamic_reset(struct net_device *); +static void uli526x_free_rxbuffer(struct uli526x_board_info *); +static void uli526x_init(struct net_device *); +static void uli526x_set_phyxcer(struct uli526x_board_info *); + +/* ULI526X network board routine ---------------------------- */ + +/* + * Search ULI526X board, allocate space and register it + */ + +static int __devinit uli526x_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uli526x_board_info *db; /* board information structure */ + struct net_device *dev; + int i, err; + + ULI526X_DBUG(0, "uli526x_init_one()", 0); + + if (!printed_version++) + printk(version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { + printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_request_regions(pdev, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if(db->desc_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if(db->buf_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + + db->pdev = pdev; + db->init = 1; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + + /* Register some necessary functions */ + dev->open = &uli526x_open; + dev->hard_start_xmit = &uli526x_start_xmit; + dev->stop = &uli526x_stop; + dev->get_stats = &uli526x_get_stats; + dev->set_multicast_list = &uli526x_set_filter_mode; + dev->ethtool_ops = &netdev_ethtool_ops; + spin_lock_init(&db->lock); + + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ + { + outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode + outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port + //Read MAC address from CR14 + for (i = 0; i < 6; i++) + dev->dev_addr[i] = inl(db->ioaddr + DCR14); + //Read end + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0, db->ioaddr + DCR0); //Clear CR0 + udelay(10); + } + else /*Exist SROM*/ + { + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + } + err = register_netdev (dev); + if (err) + goto err_out_res; + + printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev)); + + for (i = 0; i < 6; i++) + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + printk(", irq %d.\n", dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_nomem: + if(db->desc_pool_ptr) + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); + + if(db->buf_pool_ptr != NULL) + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit uli526x_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_remove_one()", 0); + + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); + ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" activates it. + */ + +static int uli526x_open(struct net_device *dev) +{ + int ret; + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_open", 0); + + ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + netif_carrier_off(dev); + db->wait_reset = 0; + + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + db->cr6_data |= ULI526X_TXTH_256; + db->cr0_data = CR0_DEFAULT; + + /* Initialize ULI526X board */ + uli526x_init(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = &uli526x_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initialize ULI526X board + * Reset ULI526X board + * Initialize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void uli526x_init(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + u8 phy_tmp; + u16 phy_value; + u16 phy_reg_reset; + + ULI526X_DBUG(0, "uli526x_init()", 0); + + /* Reset M526x MAC controller */ + outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ + db->phy_addr = 1; + for(phy_tmp=0;phy_tmp<32;phy_tmp++) + { + phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add + if(phy_value != 0xffff&&phy_value!=0) + { + db->phy_addr = phy_tmp; + break; + } + } + if(phy_tmp == 32) + printk(KERN_WARNING "Can not find the phy address!!!"); + /* Parser SROM and media mode */ + db->media_mode = uli526x_media_mode; + + /* Phyxcer capability setting */ + phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); + phy_reg_reset = (phy_reg_reset | 0x8000); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + udelay(500); + + /* Process Phyxcer Media Mode */ + uli526x_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & ULI526X_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initialize Transmit/Receive decriptor and CR3/4 */ + uli526x_descriptor_init(db, ioaddr); + + /* Init CR6 to program M526X operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable ULI526X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return 0; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt); + return 1; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + memcpy(txptr->tx_buf_ptr, skb->data, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Tx resource check */ + if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return 0; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int uli526x_stop(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + ULI526X_DBUG(0, "uli526x_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop ULI526X board */ + outl(ULI526X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + uli526x_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * M5261/M5263 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + if (!dev) { + ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); + return IRQ_NONE; + } + + spin_lock_irqsave(&db->lock, flags); + outl(0, ioaddr + DCR7); + + /* Got ULI526X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0x180c1) ) { + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, ioaddr + DCR7); + return IRQ_HANDLED; + } + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + uli526x_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cnt<RX_DESC_CNT) + allocate_rx_buffer(db); + + /* Free the transmitted descriptor */ + if ( db->cr5_data & 0x01) + uli526x_free_tx_pkt(dev, db); + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +/* + * Free TX resource after TX complete + */ + +static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db) +{ + struct tx_desc *txptr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + db->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + db->stats.collisions += (tdes0 >> 3) & 0xf; + db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + db->stats.tx_errors++; + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Resource available check */ + if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + { + break; + } + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + db->stats.rx_errors++; + if (rdes0 & 1) + db->stats.rx_fifo_errors++; + if (rdes0 & 2) + db->stats.rx_crc_errors++; + if (rdes0 & 0x80) + db->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ( (rxlen < RX_COPY_SIZE) && + ( (skb = dev_alloc_skb(rxlen + 2) ) + != NULL) ) { + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb->dev = dev; + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + skb->dev = dev; + skb_put(skb, rxlen); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + db->stats.rx_packets++; + db->stats.rx_bytes += rxlen; + + } else { + /* Reuse SKB buffer when the packet is error */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Get statistics from driver. + */ + +static struct net_device_stats * uli526x_get_stats(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_get_stats", 0); + return &db->stats; +} + + +/* + * Set ULI526X multicast address + */ + +static void uli526x_set_filter_mode(struct net_device * dev) +{ + struct uli526x_board_info *db = dev->priv; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + ULI526X_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) { + ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + ULI526X_DBUG(0, "Set multicast address", dev->mc_count); + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) +{ + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); + + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); + + + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; + + ecmd->transceiver = XCVR_EXTERNAL; + + ecmd->speed = 10; + ecmd->duplex = DUPLEX_HALF; + + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + ecmd->speed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + ecmd->duplex = DUPLEX_FULL; + } + if(db->link_failed) + { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if (db->media_mode & ULI526X_AUTO) + { + ecmd->autoneg = AUTONEG_ENABLE; + } +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct uli526x_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { + struct uli526x_board_info *np = netdev_priv(dev); + + ULi_ethtool_gset(np, cmd); + + return 0; +} + +static u32 netdev_get_link(struct net_device *dev) { + struct uli526x_board_info *np = netdev_priv(dev); + + if(np->link_failed) + return 0; + else + return 1; +} + +static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = netdev_get_link, + .get_wol = uli526x_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void uli526x_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12=0; + struct net_device *dev = (struct net_device *) data; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + u8 TmpSpeed=10; + + //ULI526X_DBUG(0, "uli526x_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + + /* Dynamic reset ULI526X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); // Tx polling again + + // TX Timeout + if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + printk( "%s: Tx timeout - resetting\n", + dev->name); + } + } + + if (db->wait_reset) { + ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + uli526x_dynamic_reset(dev); + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) + tmp_cr12 = 3; + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + ULI526X_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO don't need */ + if ( !(db->media_mode & 0x8) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & ULI526X_AUTO) { + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + ULI526X_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & ULI526X_AUTO) && + uli526x_sense_speed(db) ) + db->link_failed = 1; + uli526x_process_mode(db); + + if(db->link_failed==0) + { + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + TmpSpeed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); + } + else + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); + } + netif_carrier_on(dev); + } + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + else if(!(tmp_cr12 & 0x3) && db->link_failed) + { + if(db->init==1) + { + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + netif_carrier_off(dev); + } + } + db->init=0; + + /* Timer active again */ + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the ULI526X board + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Reset ULI526X board + * Re-initialize ULI526X board + */ + +static void uli526x_dynamic_reset(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + uli526x_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->init=1; + db->wait_reset = 0; + + /* Re-initialize ULI526X board */ + uli526x_init(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void uli526x_free_rxbuffer(struct uli526x_board_info * db) +{ + ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop ULI526X, then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for M5261/M5263 + * This setup frame initialize ULI526X address filter mode + */ + +static void send_filter_frame(struct net_device *dev, int mc_cnt) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct dev_mc_list *mcptr; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + ULI526X_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + addrptr = (u16 *) mcptr->dmi_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (; i<14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (db->tx_packet_cnt < TX_DESC_CNT) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n"); +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct uli526x_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 uli526x_sense_speed(struct uli526x_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + + phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); + if(phy_mode&0x8000) + phy_mode = 0x8000; + else if(phy_mode&0x4000) + phy_mode = 0x4000; + else if(phy_mode&0x2000) + phy_mode = 0x2000; + else + phy_mode = 0x1000; + + /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + switch (phy_mode) { + case 0x1000: db->op_mode = ULI526X_10MHF; break; + case 0x2000: db->op_mode = ULI526X_10MFD; break; + case 0x4000: db->op_mode = ULI526X_100MHF; break; + case 0x8000: db->op_mode = ULI526X_100MFD; break; + default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; + } + } else { + db->op_mode = ULI526X_10MHF; + ULI526X_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void uli526x_set_phyxcer(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & ULI526X_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case ULI526X_10MHF: phy_reg |= 0x20; break; + case ULI526X_10MFD: phy_reg |= 0x40; break; + case ULI526X_100MHF: phy_reg |= 0x80; break; + case ULI526X_100MFD: phy_reg |= 0x100; break; + } + + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=ULI526X_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + udelay(50); +} + + +/* + * Process op-mode + AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void uli526x_process_mode(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x8)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case ULI526X_10MHF: phy_reg = 0x0; break; + case ULI526X_10MFD: phy_reg = 0x100; break; + case ULI526X_100MHF: phy_reg = 0x2000; break; + case ULI526X_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + { + phy_writeby_cr10(iobase, phy_addr, offset, phy_data); + return; + } + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + return phy_readby_cr10(iobase, phy_addr, offset); + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Skip transition state */ + phy_read_1bit(ioaddr, chip_id); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr, chip_id); + } + + return phy_data; +} + +static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x08000000; + outl(cr10_value,ioaddr); + udelay(1); + while(1) + { + cr10_value = inl(ioaddr); + if(cr10_value&0x10000000) + break; + } + return (cr10_value&0x0ffff); +} + +static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; + outl(cr10_value,ioaddr); + udelay(1); +} +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) +{ + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) +{ + u16 phy_data; + + outl(0x50000 , ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000 , ioaddr); + udelay(1); + + return phy_data; +} + + +static struct pci_device_id uli526x_pci_tbl[] = { + { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, + { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); + + +static struct pci_driver uli526x_driver = { + .name = "uli526x", + .id_table = uli526x_pci_tbl, + .probe = uli526x_init_one, + .remove = __devexit_p(uli526x_remove_one), +}; + +MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); +MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM(debug, "i"); +MODULE_PARM(mode, "i"); +MODULE_PARM(cr6set, "i"); +MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to register the services. + */ + +static int __init uli526x_init_module(void) +{ + int rc; + + printk(version); + printed_version = 1; + + ULI526X_DBUG(0, "init_module() ", debug); + + if (debug) + uli526x_debug = debug; /* set debug flag */ + if (cr6set) + uli526x_cr6_user_set = cr6set; + + switch(mode) { + case ULI526X_10MHF: + case ULI526X_100MHF: + case ULI526X_10MFD: + case ULI526X_100MFD: + uli526x_media_mode = mode; + break; + default:uli526x_media_mode = ULI526X_AUTO; + break; + } + + rc = pci_module_init(&uli526x_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit uli526x_cleanup_module(void) +{ + ULI526X_DBUG(0, "uli526x_clean_module() ", debug); + pci_unregister_driver(&uli526x_driver); +} + +module_init(uli526x_init_module); +module_exit(uli526x_cleanup_module); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index effab0b9adc..50b8c6754b1 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -18,6 +18,9 @@ /* * Changes: * + * Mike Kershaw <dragorn@kismetwireless.net> 2005/08/14 + * Add TUNSETLINK ioctl to set the link encapsulation + * * Mark Smith <markzzzsmith@yahoo.com.au> * Use random_ether_addr() for tap MAC address. * @@ -612,6 +615,18 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, DBG(KERN_INFO "%s: owner set to %d\n", tun->dev->name, tun->owner); break; + case TUNSETLINK: + /* Only allow setting the type when the interface is down */ + if (tun->dev->flags & IFF_UP) { + DBG(KERN_INFO "%s: Linktype set failed because interface is up\n", + tun->dev->name); + return -EBUSY; + } else { + tun->dev->type = (int) arg; + DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type); + } + break; + #ifdef TUN_DEBUG case TUNSETDEBUG: tun->debug = arg; diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index f58c794a963..b56a7b516d2 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -1440,6 +1440,7 @@ static void sppp_print_bytes (u_char *p, u16 len) * @skb: The buffer to process * @dev: The device it arrived on * @p: Unused + * @orig_dev: Unused * * Protocol glue. This drives the deferred processing mode the poorer * cards use. This can be called directly by cards that do not have diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ec3f75a030d..00a07f32a81 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -137,6 +137,110 @@ config PCMCIA_RAYCS comment "Wireless 802.11b ISA/PCI cards support" depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) +config IPW2100 + tristate "Intel PRO/Wireless 2100 Network Connection" + depends on NET_RADIO && PCI && IEEE80211 + select FW_LOADER + ---help--- + A driver for the Intel PRO/Wireless 2100 Network + Connection 802.11b wireless network adapter. + + See <file:Documentation/networking/README.ipw2100> for information on + the capabilities currently enabled in this driver and for tips + for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2100.sf.net/>. Once you have the firmware image, you + will need to place it in /etc/firmware. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + If you want to compile the driver as a module ( = code which can be + inserted in and remvoed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ipw2100.ko. + +config IPW2100_MONITOR + bool "Enable promiscuous mode" + depends on IPW2100 + ---help--- + Enables promiscuous/monitor mode support for the ipw2100 driver. + With this feature compiled into the driver, you can switch to + promiscuous mode via the Wireless Tool's Monitor mode. While in this + mode, no packets can be sent. + +config IPW_DEBUG + bool "Enable full debugging output in IPW2100 module." + depends on IPW2100 + ---help--- + This option will enable debug tracing output for the IPW2100. + + This will result in the kernel module being ~60k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/bus/pci/drivers/ipw2100/debug_level + + This entry will only exist if this option is enabled. + + If you are not trying to debug or develop the IPW2100 driver, you + most likely want to say N here. + +config IPW2200 + tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" + depends on IEEE80211 && PCI + select FW_LOADER + ---help--- + A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network + Connection adapters. + + See <file:Documentation/networking/README.ipw2200> for + information on the capabilities currently enabled in this + driver and for tips for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 + for information on where to install the firmare images. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + If you want to compile the driver as a module ( = code which can be + inserted in and remvoed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ipw2200.ko. + +config IPW_DEBUG + bool "Enable full debugging output in IPW2200 module." + depends on IPW2200 + ---help--- + This option will enable debug tracing output for the IPW2200. + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/bus/pci/drivers/ipw2200/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level + + You can find the list of debug mask values in + drivers/net/wireless/ipw2200.h + + If you are not trying to debug or develop the IPW2200 driver, you + most likely want to say N here. + config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" depends on NET_RADIO && ISA && (PCI || BROKEN) @@ -185,8 +289,8 @@ config APPLE_AIRPORT a non-standard interface config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES help Enable support for PCMCIA cards supported by the "Hermes" (aka orinoco) driver when used in PLX9052 based PCI adaptors. These @@ -195,12 +299,9 @@ config PLX_HERMES 802.11b PCMCIA cards can be used in desktop machines. The Netgear MA301 is such an adaptor. - Support for these adaptors is so far still incomplete and buggy. - You have been warned. - config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES help Enable support for PCMCIA cards supported by the "Hermes" (aka orinoco) driver when used in TMD7160 based PCI adaptors. These @@ -208,12 +309,18 @@ config TMD_HERMES PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that 802.11b PCMCIA cards can be used in desktop machines. - Support for these adaptors is so far still incomplete and buggy. - You have been warned. +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES help Enable support for PCI and mini-PCI 802.11b wireless NICs based on the Prism 2.5 chipset. These are true PCI cards, not the 802.11b @@ -268,6 +375,19 @@ config PCMCIA_HERMES configure your card and that /etc/pcmcia/wireless.opts works: <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on NET_RADIO && PCMCIA && HERMES + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at + <http://sourceforge.net/projects/orinoco/> + config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) @@ -355,6 +475,8 @@ config PRISM54 say M here and read <file:Documentation/modules.txt>. The module will be called prism54.ko. +source "drivers/net/wireless/hostap/Kconfig" + # yes, this works even when no drivers are selected config NET_WIRELESS bool diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 2b87841322c..3a6f7ba326c 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -2,6 +2,10 @@ # Makefile for the Linux Wireless network device drivers. # +obj-$(CONFIG_IPW2100) += ipw2100.o + +obj-$(CONFIG_IPW2200) += ipw2200.o + obj-$(CONFIG_STRIP) += strip.o obj-$(CONFIG_ARLAN) += arlan.o @@ -18,6 +22,8 @@ obj-$(CONFIG_APPLE_AIRPORT) += airport.o obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o +obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o +obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o obj-$(CONFIG_AIRO) += airo.o obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o @@ -28,6 +34,8 @@ obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o obj-$(CONFIG_PRISM54) += prism54/ +obj-$(CONFIG_HOSTAP) += hostap/ + # 16-bit wireless PCMCIA client drivers obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index df20adcd073..2be65d308fb 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1040,7 +1040,7 @@ typedef struct { u16 status; } WifiCtlHdr; -WifiCtlHdr wifictlhdr8023 = { +static WifiCtlHdr wifictlhdr8023 = { .ctlhdr = { .ctl = HOST_DONT_RLSE, } @@ -1111,13 +1111,13 @@ static int airo_thread(void *data); static void timer_func( struct net_device *dev ); static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); #ifdef WIRELESS_EXT -struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); +static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); static void airo_read_wireless_stats (struct airo_info *local); #endif /* WIRELESS_EXT */ #ifdef CISCO_EXT static int readrids(struct net_device *dev, aironet_ioctl *comp); static int writerids(struct net_device *dev, aironet_ioctl *comp); -int flashcard(struct net_device *dev, aironet_ioctl *comp); +static int flashcard(struct net_device *dev, aironet_ioctl *comp); #endif /* CISCO_EXT */ #ifdef MICSUPPORT static void micinit(struct airo_info *ai); @@ -1226,6 +1226,12 @@ static int setup_proc_entry( struct net_device *dev, static int takedown_proc_entry( struct net_device *dev, struct airo_info *apriv ); +static int cmdreset(struct airo_info *ai); +static int setflashmode (struct airo_info *ai); +static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime); +static int flashputbuf(struct airo_info *ai); +static int flashrestart(struct airo_info *ai,struct net_device *dev); + #ifdef MICSUPPORT /*********************************************************************** * MIC ROUTINES * @@ -1234,10 +1240,11 @@ static int takedown_proc_entry( struct net_device *dev, static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq); static void MoveWindow(miccntx *context, u32 micSeq); -void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *); -void emmh32_init(emmh32_context *context); -void emmh32_update(emmh32_context *context, u8 *pOctets, int len); -void emmh32_final(emmh32_context *context, u8 digest[4]); +static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *); +static void emmh32_init(emmh32_context *context); +static void emmh32_update(emmh32_context *context, u8 *pOctets, int len); +static void emmh32_final(emmh32_context *context, u8 digest[4]); +static int flashpchar(struct airo_info *ai,int byte,int dwelltime); /* micinit - Initialize mic seed */ @@ -1301,7 +1308,7 @@ static int micsetup(struct airo_info *ai) { int i; if (ai->tfm == NULL) - ai->tfm = crypto_alloc_tfm("aes", 0); + ai->tfm = crypto_alloc_tfm("aes", CRYPTO_TFM_REQ_MAY_SLEEP); if (ai->tfm == NULL) { printk(KERN_ERR "airo: failed to load transform for AES\n"); @@ -1315,7 +1322,7 @@ static int micsetup(struct airo_info *ai) { return SUCCESS; } -char micsnap[]= {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02}; +static char micsnap[] = {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02}; /*=========================================================================== * Description: Mic a packet @@ -1570,7 +1577,7 @@ static void MoveWindow(miccntx *context, u32 micSeq) static unsigned char aes_counter[16]; /* expand the key to fill the MMH coefficient array */ -void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *tfm) +static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *tfm) { /* take the keying material, expand if necessary, truncate at 16-bytes */ /* run through AES counter mode to generate context->coeff[] */ @@ -1602,7 +1609,7 @@ void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto } /* prepare for calculation of a new mic */ -void emmh32_init(emmh32_context *context) +static void emmh32_init(emmh32_context *context) { /* prepare for new mic calculation */ context->accum = 0; @@ -1610,7 +1617,7 @@ void emmh32_init(emmh32_context *context) } /* add some bytes to the mic calculation */ -void emmh32_update(emmh32_context *context, u8 *pOctets, int len) +static void emmh32_update(emmh32_context *context, u8 *pOctets, int len) { int coeff_position, byte_position; @@ -1652,7 +1659,7 @@ void emmh32_update(emmh32_context *context, u8 *pOctets, int len) static u32 mask32[4] = { 0x00000000L, 0xFF000000L, 0xFFFF0000L, 0xFFFFFF00L }; /* calculate the mic */ -void emmh32_final(emmh32_context *context, u8 digest[4]) +static void emmh32_final(emmh32_context *context, u8 digest[4]) { int coeff_position, byte_position; u32 val; @@ -2232,7 +2239,7 @@ static void airo_read_stats(struct airo_info *ai) { u32 *vals = stats_rid.vals; clear_bit(JOB_STATS, &ai->flags); - if (ai->power) { + if (ai->power.event) { up(&ai->sem); return; } @@ -2255,7 +2262,7 @@ static void airo_read_stats(struct airo_info *ai) { ai->stats.rx_fifo_errors = vals[0]; } -struct net_device_stats *airo_get_stats(struct net_device *dev) +static struct net_device_stats *airo_get_stats(struct net_device *dev) { struct airo_info *local = dev->priv; @@ -2403,8 +2410,7 @@ void stop_airo_card( struct net_device *dev, int freeres ) } } #ifdef MICSUPPORT - if (ai->tfm) - crypto_free_tfm(ai->tfm); + crypto_free_tfm(ai->tfm); #endif del_airo_dev( dev ); free_netdev( dev ); @@ -2414,7 +2420,7 @@ EXPORT_SYMBOL(stop_airo_card); static int add_airo_dev( struct net_device *dev ); -int wll_header_parse(struct sk_buff *skb, unsigned char *haddr) +static int wll_header_parse(struct sk_buff *skb, unsigned char *haddr) { memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); return ETH_ALEN; @@ -2681,7 +2687,7 @@ static struct net_device *init_wifidev(struct airo_info *ai, return dev; } -int reset_card( struct net_device *dev , int lock) { +static int reset_card( struct net_device *dev , int lock) { struct airo_info *ai = dev->priv; if (lock && down_interruptible(&ai->sem)) @@ -2696,9 +2702,9 @@ int reset_card( struct net_device *dev , int lock) { return 0; } -struct net_device *_init_airo_card( unsigned short irq, int port, - int is_pcmcia, struct pci_dev *pci, - struct device *dmdev ) +static struct net_device *_init_airo_card( unsigned short irq, int port, + int is_pcmcia, struct pci_dev *pci, + struct device *dmdev ) { struct net_device *dev; struct airo_info *ai; @@ -2962,7 +2968,7 @@ static int airo_thread(void *data) { break; } - if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) { + if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) { up(&ai->sem); continue; } @@ -3252,7 +3258,7 @@ badrx: wstats.noise = apriv->wstats.qual.noise; wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_QUAL_UPDATED - | IW_QUAL_NOISE_UPDATED; + | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(dev, sa, &wstats); } @@ -3598,7 +3604,7 @@ void mpi_receive_802_11 (struct airo_info *ai) wstats.noise = ai->wstats.qual.noise; wstats.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED - | IW_QUAL_NOISE_UPDATED; + | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(ai->dev, sa, &wstats); } @@ -5514,7 +5520,7 @@ static int airo_pci_resume(struct pci_dev *pdev) pci_restore_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0); - if (ai->power > 1) { + if (ai->power.event > 1) { reset_card(dev, 0); mpi_init_descriptors(ai); setup_card(ai, dev->dev_addr, 0); @@ -6483,22 +6489,20 @@ static int airo_get_range(struct net_device *dev, range->max_qual.qual = 100; /* % */ else range->max_qual.qual = airo_get_max_quality(&cap_rid); - range->max_qual.level = 0; /* 0 means we use dBm */ - range->max_qual.noise = 0; - range->max_qual.updated = 0; + range->max_qual.level = 0x100 - 120; /* -120 dBm */ + range->max_qual.noise = 0x100 - 120; /* -120 dBm */ /* Experimental measurements - boundary 11/5.5 Mb/s */ /* Note : with or without the (local->rssi), results * are somewhat different. - Jean II */ if (local->rssi) { - range->avg_qual.qual = 50; /* % */ - range->avg_qual.level = 186; /* -70 dBm */ + range->avg_qual.qual = 50; /* % */ + range->avg_qual.level = 0x100 - 70; /* -70 dBm */ } else { range->avg_qual.qual = airo_get_avg_quality(&cap_rid); - range->avg_qual.level = 176; /* -80 dBm */ + range->avg_qual.level = 0x100 - 80; /* -80 dBm */ } - range->avg_qual.noise = 0; - range->avg_qual.updated = 0; + range->avg_qual.noise = 0x100 - 85; /* -85 dBm */ for(i = 0 ; i < 8 ; i++) { range->bitrate[i] = cap_rid.supportedRates[i] * 500000; @@ -6721,15 +6725,17 @@ static int airo_get_aplist(struct net_device *dev, if (local->rssi) { qual[i].level = 0x100 - BSSList.dBm; qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm ); - qual[i].updated = IW_QUAL_QUAL_UPDATED; + qual[i].updated = IW_QUAL_QUAL_UPDATED + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_DBM; } else { qual[i].level = (BSSList.dBm + 321) / 2; qual[i].qual = 0; - qual[i].updated = IW_QUAL_QUAL_INVALID; + qual[i].updated = IW_QUAL_QUAL_INVALID + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_DBM; } qual[i].noise = local->wstats.qual.noise; - qual[i].updated = IW_QUAL_LEVEL_UPDATED - | IW_QUAL_NOISE_UPDATED; if (BSSList.index == 0xffff) break; } @@ -6855,15 +6861,17 @@ static inline char *airo_translate_scan(struct net_device *dev, if (ai->rssi) { iwe.u.qual.level = 0x100 - bss->dBm; iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm ); - iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED; + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_DBM; } else { iwe.u.qual.level = (bss->dBm + 321) / 2; iwe.u.qual.qual = 0; - iwe.u.qual.updated = IW_QUAL_QUAL_INVALID; + iwe.u.qual.updated = IW_QUAL_QUAL_INVALID + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_DBM; } iwe.u.qual.noise = ai->wstats.qual.noise; - iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED - | IW_QUAL_NOISE_UPDATED; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ @@ -7116,7 +7124,7 @@ static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) int rc = 0; struct airo_info *ai = (struct airo_info *)dev->priv; - if (ai->power) + if (ai->power.event) return 0; switch (cmd) { @@ -7195,7 +7203,7 @@ static void airo_read_wireless_stats(struct airo_info *local) /* Get stats out of the card */ clear_bit(JOB_WSTATS, &local->flags); - if (local->power) { + if (local->power.event) { up(&local->sem); return; } @@ -7216,13 +7224,12 @@ static void airo_read_wireless_stats(struct airo_info *local) local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); } - local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED; if (status_rid.len >= 124) { local->wstats.qual.noise = 0x100 - status_rid.noisedBm; - local->wstats.qual.updated |= IW_QUAL_NOISE_UPDATED; + local->wstats.qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; } else { local->wstats.qual.noise = 0; - local->wstats.qual.updated |= IW_QUAL_NOISE_INVALID; + local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID | IW_QUAL_DBM; } /* Packets discarded in the wireless adapter due to wireless @@ -7235,7 +7242,7 @@ static void airo_read_wireless_stats(struct airo_info *local) local->wstats.miss.beacon = vals[34]; } -struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) +static struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) { struct airo_info *local = dev->priv; @@ -7450,14 +7457,8 @@ static int writerids(struct net_device *dev, aironet_ioctl *comp) { * Flash command switch table */ -int flashcard(struct net_device *dev, aironet_ioctl *comp) { +static int flashcard(struct net_device *dev, aironet_ioctl *comp) { int z; - int cmdreset(struct airo_info *); - int setflashmode(struct airo_info *); - int flashgchar(struct airo_info *,int,int); - int flashpchar(struct airo_info *,int,int); - int flashputbuf(struct airo_info *); - int flashrestart(struct airo_info *,struct net_device *); /* Only super-user can modify flash */ if (!capable(CAP_NET_ADMIN)) @@ -7515,7 +7516,7 @@ int flashcard(struct net_device *dev, aironet_ioctl *comp) { * card. */ -int cmdreset(struct airo_info *ai) { +static int cmdreset(struct airo_info *ai) { disable_MAC(ai, 1); if(!waitbusy (ai)){ @@ -7539,7 +7540,7 @@ int cmdreset(struct airo_info *ai) { * mode */ -int setflashmode (struct airo_info *ai) { +static int setflashmode (struct airo_info *ai) { set_bit (FLAG_FLASHING, &ai->flags); OUT4500(ai, SWS0, FLASH_COMMAND); @@ -7566,7 +7567,7 @@ int setflashmode (struct airo_info *ai) { * x 50us for echo . */ -int flashpchar(struct airo_info *ai,int byte,int dwelltime) { +static int flashpchar(struct airo_info *ai,int byte,int dwelltime) { int echo; int waittime; @@ -7606,7 +7607,7 @@ int flashpchar(struct airo_info *ai,int byte,int dwelltime) { * Get a character from the card matching matchbyte * Step 3) */ -int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){ +static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){ int rchar; unsigned char rbyte=0; @@ -7637,7 +7638,7 @@ int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){ * send to the card */ -int flashputbuf(struct airo_info *ai){ +static int flashputbuf(struct airo_info *ai){ int nwords; /* Write stuff */ @@ -7659,7 +7660,7 @@ int flashputbuf(struct airo_info *ai){ /* * */ -int flashrestart(struct airo_info *ai,struct net_device *dev){ +static int flashrestart(struct airo_info *ai,struct net_device *dev){ int i,status; ssleep(1); /* Added 12/7/00 */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 18a7d38d2a1..587869d86ee 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -68,7 +68,7 @@ #include <linux/device.h> #include <linux/moduleparam.h> #include <linux/firmware.h> -#include "ieee802_11.h" +#include <net/ieee80211.h> #include "atmel.h" #define DRIVER_MAJOR 0 @@ -618,12 +618,12 @@ static int atmel_lock_mac(struct atmel_private *priv); static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); static void atmel_command_irq(struct atmel_private *priv); static int atmel_validate_channel(struct atmel_private *priv, int channel); -static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, u16 frame_len, u8 rssi); static void atmel_management_timer(u_long a); static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, u8 *body, int body_len); static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); @@ -827,7 +827,7 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l static int start_tx (struct sk_buff *skb, struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - struct ieee802_11_hdr header; + struct ieee80211_hdr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; @@ -863,17 +863,17 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) return 1; } - frame_ctl = IEEE802_11_FTYPE_DATA; + frame_ctl = IEEE80211_FTYPE_DATA; header.duration_id = 0; header.seq_ctl = 0; if (priv->wep_is_on) - frame_ctl |= IEEE802_11_FCTL_WEP; + frame_ctl |= IEEE80211_FCTL_PROTECTED; if (priv->operating_mode == IW_MODE_ADHOC) { memcpy(&header.addr1, skb->data, 6); memcpy(&header.addr2, dev->dev_addr, 6); memcpy(&header.addr3, priv->BSSID, 6); } else { - frame_ctl |= IEEE802_11_FCTL_TODS; + frame_ctl |= IEEE80211_FCTL_TODS; memcpy(&header.addr1, priv->CurrentBSSID, 6); memcpy(&header.addr2, dev->dev_addr, 6); memcpy(&header.addr3, skb->data, 6); @@ -902,7 +902,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) } static void atmel_transmit_management_frame(struct atmel_private *priv, - struct ieee802_11_hdr *header, + struct ieee80211_hdr *header, u8 *body, int body_len) { u16 buff; @@ -917,7 +917,7 @@ static void atmel_transmit_management_frame(struct atmel_private *priv, tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); } -static void fast_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc) { /* fast path: unfragmented packet copy directly into skbuf */ @@ -955,7 +955,7 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *head } memcpy(skbp, header->addr1, 6); /* destination address */ - if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(&skbp[6], header->addr3, 6); else memcpy(&skbp[6], header->addr2, 6); /* source address */ @@ -990,14 +990,14 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return (crc ^ 0xffffffff) == netcrc; } -static void frag_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) { u8 mac4[6]; u8 source[6]; struct sk_buff *skb; - if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(source, header->addr3, 6); else memcpy(source, header->addr2, 6); @@ -1082,7 +1082,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *head static void rx_done_irq(struct atmel_private *priv) { int i; - struct ieee802_11_hdr header; + struct ieee80211_hdr header; for (i = 0; atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && @@ -1117,7 +1117,7 @@ static void rx_done_irq(struct atmel_private *priv) /* probe for CRC use here if needed once five packets have arrived with the same crc status, we assume we know what's happening and stop probing */ if (priv->probe_crc) { - if (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP)) { + if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) { priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size); } else { priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24); @@ -1132,16 +1132,16 @@ static void rx_done_irq(struct atmel_private *priv) } /* don't CRC header when WEP in use */ - if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP))) { + if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) { crc = crc32_le(0xffffffff, (unsigned char *)&header, 24); } msdu_size -= 24; /* header */ - if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_DATA) { + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { - int more_fragments = frame_ctl & IEEE802_11_FCTL_MOREFRAGS; - u8 packet_fragment_no = seq_control & IEEE802_11_SCTL_FRAG; - u16 packet_sequence_no = (seq_control & IEEE802_11_SCTL_SEQ) >> 4; + int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS; + u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG; + u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4; if (!more_fragments && packet_fragment_no == 0 ) { fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc); @@ -1151,7 +1151,7 @@ static void rx_done_irq(struct atmel_private *priv) } } - if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_MGMT) { + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { /* copy rest of packet into buffer */ atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size); @@ -1593,7 +1593,6 @@ struct net_device *init_atmel_card( unsigned short irq, int port, const AtmelFWT dev->set_mac_address = atmel_set_mac_address; dev->hard_start_xmit = start_tx; dev->get_stats = atmel_get_stats; - dev->get_wireless_stats = atmel_get_wireless_stats; dev->wireless_handlers = (struct iw_handler_def *)&atmel_handler_def; dev->do_ioctl = atmel_ioctl; dev->irq = irq; @@ -2411,7 +2410,8 @@ static const struct iw_handler_def atmel_handler_def = .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), .standard = (iw_handler *) atmel_handler, .private = (iw_handler *) atmel_private_handler, - .private_args = (struct iw_priv_args *) atmel_private_args + .private_args = (struct iw_priv_args *) atmel_private_args, + .get_wireless_stats = atmel_get_wireless_stats }; static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -2424,19 +2424,6 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) char domain[REGDOMAINSZ+1]; switch (cmd) { - case SIOCGIWPRIV: - if(wrq->u.data.pointer) { - /* Set the number of ioctl available */ - wrq->u.data.length = sizeof(atmel_private_args) / sizeof(atmel_private_args[0]); - - /* Copy structure to the user buffer */ - if (copy_to_user(wrq->u.data.pointer, - (u_char *) atmel_private_args, - sizeof(atmel_private_args))) - rc = -EFAULT; - } - break; - case ATMELIDIFC: wrq->u.param.value = ATMELMAGIC; break; @@ -2663,10 +2650,10 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len) { - struct ieee802_11_hdr header; + struct ieee80211_hdr header; struct auth_body auth; - header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | IEEE802_11_STYPE_AUTH); + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; memcpy(header.addr1, priv->CurrentBSSID, 6); @@ -2677,7 +2664,7 @@ static void send_authentication_request(struct atmel_private *priv, u8 *challeng auth.alg = cpu_to_le16(C80211_MGMT_AAN_SHAREDKEY); /* no WEP for authentication frames with TrSeqNo 1 */ if (priv->CurrentAuthentTransactionSeqNum != 1) - header.frame_ctl |= cpu_to_le16(IEEE802_11_FCTL_WEP); + header.frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); } else { auth.alg = cpu_to_le16(C80211_MGMT_AAN_OPENSYSTEM); } @@ -2701,7 +2688,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) { u8 *ssid_el_p; int bodysize; - struct ieee802_11_hdr header; + struct ieee80211_hdr header; struct ass_req_format { u16 capability; u16 listen_interval; @@ -2714,8 +2701,8 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) u8 rates[4]; } body; - header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | - (is_reassoc ? IEEE802_11_STYPE_REASSOC_REQ : IEEE802_11_STYPE_ASSOC_REQ)); + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + (is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ)); header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; @@ -2751,9 +2738,9 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); } -static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee802_11_hdr *header) +static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr *header) { - if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; else return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0; @@ -2801,7 +2788,7 @@ static int retrieve_bss(struct atmel_private *priv) } -static void store_bss_info(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr *header, u16 capability, u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, u8 *ssid, int is_beacon) { @@ -3085,12 +3072,12 @@ static void atmel_smooth_qual(struct atmel_private *priv) } /* deals with incoming managment frames. */ -static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, u16 frame_len, u8 rssi) { u16 subtype; - switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_STYPE) { + switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE) { case C80211_SUBTYPE_MGMT_BEACON : case C80211_SUBTYPE_MGMT_ProbeResponse: diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig new file mode 100644 index 00000000000..56f41c714d3 --- /dev/null +++ b/drivers/net/wireless/hostap/Kconfig @@ -0,0 +1,73 @@ +config HOSTAP + tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" + depends on NET_RADIO + select IEEE80211 + select IEEE80211_CRYPT_WEP + ---help--- + Shared driver code for IEEE 802.11b wireless cards based on + Intersil Prism2/2.5/3 chipset. This driver supports so called + Host AP mode that allows the card to act as an IEEE 802.11 + access point. + + See <http://hostap.epitest.fi/> for more information about the + Host AP driver configuration and tools. This site includes + information and tools (hostapd and wpa_supplicant) for WPA/WPA2 + support. + + This option includes the base Host AP driver code that is shared by + different hardware models. You will also need to enable support for + PLX/PCI/CS version of the driver to actually use the driver. + + The driver can be compiled as a module and it will be called + "hostap.ko". + +config HOSTAP_FIRMWARE + bool "Support downloading firmware images with Host AP driver" + depends on HOSTAP + ---help--- + Configure Host AP driver to include support for firmware image + download. Current version supports only downloading to volatile, i.e., + RAM memory. Flash upgrade is not yet supported. + + Firmware image downloading needs user space tool, prism2_srec. It is + available from http://hostap.epitest.fi/. + +config HOSTAP_PLX + tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based + PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + "hostap_plx.ko". + +config HOSTAP_PCI + tristate "Host AP driver for Prism2.5 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2.5 PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + "hostap_pci.ko". + +config HOSTAP_CS + tristate "Host AP driver for Prism2/2.5/3 PC Cards" + depends on PCMCIA!=n && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + "hostap_cs.ko". diff --git a/drivers/net/wireless/hostap/Makefile b/drivers/net/wireless/hostap/Makefile new file mode 100644 index 00000000000..fc62235bfc2 --- /dev/null +++ b/drivers/net/wireless/hostap/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_HOSTAP) += hostap.o + +obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o +obj-$(CONFIG_HOSTAP_PLX) += hostap_plx.o +obj-$(CONFIG_HOSTAP_PCI) += hostap_pci.o diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap.c new file mode 100644 index 00000000000..e7f5821b494 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap.c @@ -0,0 +1,1198 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3 - hostap.o module, common routines + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2005, Jouni Malinen <jkmaline@cc.hut.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/if_arp.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/workqueue.h> +#include <linux/kmod.h> +#include <linux/rtnetlink.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/ieee80211.h> +#include <net/ieee80211_crypt.h> +#include <asm/uaccess.h> + +#include "hostap_wlan.h" +#include "hostap_80211.h" +#include "hostap_ap.h" +#include "hostap.h" + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Host AP common routines"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + +#define TX_TIMEOUT (2 * HZ) + +#define PRISM2_MAX_FRAME_SIZE 2304 +#define PRISM2_MIN_MTU 256 +/* FIX: */ +#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */)) + + +/* hostap.c */ +static int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked); +static int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove); + +/* hostap_ap.c */ +static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], + struct iw_quality qual[], int buf_size, + int aplist); +static int prism2_ap_translate_scan(struct net_device *dev, char *buffer); +static int prism2_hostapd(struct ap_data *ap, + struct prism2_hostapd_param *param); +static void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, + struct ieee80211_crypt_data ***crypt); +static void ap_control_kickall(struct ap_data *ap); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static int ap_control_add_mac(struct mac_restrictions *mac_restrictions, + u8 *mac); +static int ap_control_del_mac(struct mac_restrictions *mac_restrictions, + u8 *mac); +static void ap_control_flush_macs(struct mac_restrictions *mac_restrictions); +static int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, + u8 *mac); +#endif /* !PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +static const long freq_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; +#define FREQ_COUNT (sizeof(freq_list) / sizeof(freq_list[0])) + + +/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ +/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ +static unsigned char rfc1042_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; +/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ +static unsigned char bridge_tunnel_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; +/* No encapsulation header if EtherType < 0x600 (=length) */ + + +/* FIX: these could be compiled separately and linked together to hostap.o */ +#include "hostap_ap.c" +#include "hostap_info.c" +#include "hostap_ioctl.c" +#include "hostap_proc.c" +#include "hostap_80211_rx.c" +#include "hostap_80211_tx.c" + + +struct net_device * hostap_add_interface(struct local_info *local, + int type, int rtnl_locked, + const char *prefix, + const char *name) +{ + struct net_device *dev, *mdev; + struct hostap_interface *iface; + int ret; + + dev = alloc_etherdev(sizeof(struct hostap_interface)); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + iface->dev = dev; + iface->local = local; + iface->type = type; + list_add(&iface->list, &local->hostap_interfaces); + + mdev = local->dev; + memcpy(dev->dev_addr, mdev->dev_addr, ETH_ALEN); + dev->base_addr = mdev->base_addr; + dev->irq = mdev->irq; + dev->mem_start = mdev->mem_start; + dev->mem_end = mdev->mem_end; + + hostap_setup_dev(dev, local, 0); + dev->destructor = free_netdev; + + sprintf(dev->name, "%s%s", prefix, name); + if (!rtnl_locked) + rtnl_lock(); + + ret = 0; + if (strchr(dev->name, '%')) + ret = dev_alloc_name(dev, dev->name); + + SET_NETDEV_DEV(dev, mdev->class_dev.dev); + if (ret >= 0) + ret = register_netdevice(dev); + + if (!rtnl_locked) + rtnl_unlock(); + + if (ret < 0) { + printk(KERN_WARNING "%s: failed to add new netdevice!\n", + dev->name); + free_netdev(dev); + return NULL; + } + + printk(KERN_DEBUG "%s: registered netdevice %s\n", + mdev->name, dev->name); + + return dev; +} + + +void hostap_remove_interface(struct net_device *dev, int rtnl_locked, + int remove_from_list) +{ + struct hostap_interface *iface; + + if (!dev) + return; + + iface = netdev_priv(dev); + + if (remove_from_list) { + list_del(&iface->list); + } + + if (dev == iface->local->ddev) + iface->local->ddev = NULL; + else if (dev == iface->local->apdev) + iface->local->apdev = NULL; + else if (dev == iface->local->stadev) + iface->local->stadev = NULL; + + if (rtnl_locked) + unregister_netdevice(dev); + else + unregister_netdev(dev); + + /* dev->destructor = free_netdev() will free the device data, including + * private data, when removing the device */ +} + + +static inline int prism2_wds_special_addr(u8 *addr) +{ + if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5]) + return 0; + + return 1; +} + + +static int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked) +{ + struct net_device *dev; + struct list_head *ptr; + struct hostap_interface *iface, *empty, *match; + + empty = match = NULL; + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (prism2_wds_special_addr(iface->u.wds.remote_addr)) + empty = iface; + else if (memcmp(iface->u.wds.remote_addr, remote_addr, + ETH_ALEN) == 0) { + match = iface; + break; + } + } + if (!match && empty && !prism2_wds_special_addr(remote_addr)) { + /* take pre-allocated entry into use */ + memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", + local->dev->name, empty->dev->name); + return 0; + } + read_unlock_bh(&local->iface_lock); + + if (!prism2_wds_special_addr(remote_addr)) { + if (match) + return -EEXIST; + hostap_add_sta(local->ap, remote_addr); + } + + if (local->wds_connections >= local->wds_max_connections) + return -ENOBUFS; + + /* verify that there is room for wds# postfix in the interface name */ + if (strlen(local->dev->name) > IFNAMSIZ - 5) { + printk(KERN_DEBUG "'%s' too long base device name\n", + local->dev->name); + return -EINVAL; + } + + dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked, + local->ddev->name, "wds%d"); + if (dev == NULL) + return -ENOMEM; + + iface = netdev_priv(dev); + memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN); + + local->wds_connections++; + + return 0; +} + + +static int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove) +{ + unsigned long flags; + struct list_head *ptr; + struct hostap_interface *iface, *selected = NULL; + + write_lock_irqsave(&local->iface_lock, flags); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (memcmp(iface->u.wds.remote_addr, remote_addr, + ETH_ALEN) == 0) { + selected = iface; + break; + } + } + if (selected && !do_not_remove) + list_del(&selected->list); + write_unlock_irqrestore(&local->iface_lock, flags); + + if (selected) { + if (do_not_remove) + memset(selected->u.wds.remote_addr, 0, ETH_ALEN); + else { + hostap_remove_interface(selected->dev, rtnl_locked, 0); + local->wds_connections--; + } + } + + return selected ? 0 : -ENODEV; +} + + +u16 hostap_tx_callback_register(local_info_t *local, + void (*func)(struct sk_buff *, int ok, void *), + void *data) +{ + unsigned long flags; + struct hostap_tx_callback_info *entry; + + entry = (struct hostap_tx_callback_info *) kmalloc(sizeof(*entry), + GFP_ATOMIC); + if (entry == NULL) + return 0; + + entry->func = func; + entry->data = data; + + spin_lock_irqsave(&local->lock, flags); + entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1; + entry->next = local->tx_callback; + local->tx_callback = entry; + spin_unlock_irqrestore(&local->lock, flags); + + return entry->idx; +} + + +int hostap_tx_callback_unregister(local_info_t *local, u16 idx) +{ + unsigned long flags; + struct hostap_tx_callback_info *cb, *prev = NULL; + + spin_lock_irqsave(&local->lock, flags); + cb = local->tx_callback; + while (cb != NULL && cb->idx != idx) { + prev = cb; + cb = cb->next; + } + if (cb) { + if (prev == NULL) + local->tx_callback = cb->next; + else + prev->next = cb->next; + kfree(cb); + } + spin_unlock_irqrestore(&local->lock, flags); + + return cb ? 0 : -1; +} + + +/* val is in host byte order */ +int hostap_set_word(struct net_device *dev, int rid, u16 val) +{ + struct hostap_interface *iface; + u16 tmp = cpu_to_le16(val); + iface = netdev_priv(dev); + return iface->local->func->set_rid(dev, rid, &tmp, 2); +} + + +int hostap_set_string(struct net_device *dev, int rid, const char *val) +{ + struct hostap_interface *iface; + char buf[MAX_SSID_LEN + 2]; + int len; + + iface = netdev_priv(dev); + len = strlen(val); + if (len > MAX_SSID_LEN) + return -1; + memset(buf, 0, sizeof(buf)); + buf[0] = len; /* little endian 16 bit word */ + memcpy(buf + 2, val, len); + + return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2); +} + + +u16 hostap_get_porttype(local_info_t *local) +{ + if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + if (local->iw_mode == IW_MODE_ADHOC) + return HFA384X_PORTTYPE_IBSS; + if (local->iw_mode == IW_MODE_INFRA) + return HFA384X_PORTTYPE_BSS; + if (local->iw_mode == IW_MODE_REPEAT) + return HFA384X_PORTTYPE_WDS; + if (local->iw_mode == IW_MODE_MONITOR) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + return HFA384X_PORTTYPE_HOSTAP; +} + + +int hostap_set_encryption(local_info_t *local) +{ + u16 val, old_val; + int i, keylen, len, idx; + char keybuf[WEP_KEY_LEN + 1]; + enum { NONE, WEP, OTHER } encrypt_type; + + idx = local->tx_keyidx; + if (local->crypt[idx] == NULL || local->crypt[idx]->ops == NULL) + encrypt_type = NONE; + else if (strcmp(local->crypt[idx]->ops->name, "WEP") == 0) + encrypt_type = WEP; + else + encrypt_type = OTHER; + + if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, + 1) < 0) { + printk(KERN_DEBUG "Could not read current WEP flags.\n"); + goto fail; + } + le16_to_cpus(&val); + old_val = val; + + if (encrypt_type != NONE || local->privacy_invoked) + val |= HFA384X_WEPFLAGS_PRIVACYINVOKED; + else + val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED; + + if (local->open_wep || encrypt_type == NONE || + ((local->ieee_802_1x || local->wpa) && local->host_decrypt)) + val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + else + val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_encrypt)) + val |= HFA384X_WEPFLAGS_HOSTENCRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT; + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_decrypt)) + val |= HFA384X_WEPFLAGS_HOSTDECRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT; + + if (val != old_val && + hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) { + printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", + val); + goto fail; + } + + if (encrypt_type != WEP) + return 0; + + /* 104-bit support seems to require that all the keys are set to the + * same keylen */ + keylen = 6; /* first 5 octets */ + len = local->crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), + NULL, local->crypt[idx]->priv); + if (idx >= 0 && idx < WEP_KEYS && len > 5) + keylen = WEP_KEY_LEN + 1; /* first 13 octets */ + + for (i = 0; i < WEP_KEYS; i++) { + memset(keybuf, 0, sizeof(keybuf)); + if (local->crypt[i]) { + (void) local->crypt[i]->ops->get_key( + keybuf, sizeof(keybuf), + NULL, local->crypt[i]->priv); + } + if (local->func->set_rid(local->dev, + HFA384X_RID_CNFDEFAULTKEY0 + i, + keybuf, keylen)) { + printk(KERN_DEBUG "Could not set key %d (len=%d)\n", + i, keylen); + goto fail; + } + } + if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) { + printk(KERN_DEBUG "Could not set default keyid %d\n", idx); + goto fail; + } + + return 0; + + fail: + printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); + return -1; +} + + +int hostap_set_antsel(local_info_t *local) +{ + u16 val; + int ret = 0; + + if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_TX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(2) | BIT(1)); + switch (local->antsel_tx) { + case HOSTAP_ANTSEL_DIVERSITY: + val |= BIT(1); + break; + case HOSTAP_ANTSEL_LOW: + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(2); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_TX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting TX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_RX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(1) | BIT(0)); + switch (local->antsel_rx) { + case HOSTAP_ANTSEL_DIVERSITY: + break; + case HOSTAP_ANTSEL_LOW: + val |= BIT(0); + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(0) | BIT(1); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_RX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting RX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + return ret; +} + + +int hostap_set_roaming(local_info_t *local) +{ + u16 val; + + switch (local->host_roaming) { + case 1: + val = HFA384X_ROAMING_HOST; + break; + case 2: + val = HFA384X_ROAMING_DISABLED; + break; + case 0: + default: + val = HFA384X_ROAMING_FIRMWARE; + break; + } + + return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val); +} + + +int hostap_set_auth_algs(local_info_t *local) +{ + int val = local->auth_algs; + /* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication + * set to include both Open and Shared Key flags. It tries to use + * Shared Key authentication in that case even if WEP keys are not + * configured.. STA f/w v0.7.6 is able to handle such configuration, + * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */ + if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) && + val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY) + val = PRISM2_AUTH_OPEN; + + if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) { + printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " + "failed\n", local->dev->name, local->auth_algs); + return -EINVAL; + } + + return 0; +} + + +void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx) +{ + u16 status, fc; + + status = __le16_to_cpu(rx->status); + + printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " + "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; " + "jiffies=%ld\n", + name, status, (status >> 8) & 0x07, status >> 13, status & 1, + rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies); + + fc = __le16_to_cpu(rx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl), + __le16_to_cpu(rx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" + MACSTR "\n", + MAC2STR(rx->addr1), MAC2STR(rx->addr2), MAC2STR(rx->addr3), + MAC2STR(rx->addr4)); + + printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", + MAC2STR(rx->dst_addr), MAC2STR(rx->src_addr), + __be16_to_cpu(rx->len)); +} + + +void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) +{ + u16 fc; + + printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " + "tx_control=0x%04x; jiffies=%ld\n", + name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate, + __le16_to_cpu(tx->tx_control), jiffies); + + fc = __le16_to_cpu(tx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl), + __le16_to_cpu(tx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" + MACSTR "\n", + MAC2STR(tx->addr1), MAC2STR(tx->addr2), MAC2STR(tx->addr3), + MAC2STR(tx->addr4)); + + printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", + MAC2STR(tx->dst_addr), MAC2STR(tx->src_addr), + __be16_to_cpu(tx->len)); +} + + +int hostap_80211_header_parse(struct sk_buff *skb, unsigned char *haddr) +{ + memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); /* addr2 */ + return ETH_ALEN; +} + + +int hostap_80211_prism_header_parse(struct sk_buff *skb, unsigned char *haddr) +{ + if (*(u32 *)skb->mac.raw == LWNG_CAP_DID_BASE) { + memcpy(haddr, skb->mac.raw + + sizeof(struct linux_wlan_ng_prism_hdr) + 10, + ETH_ALEN); /* addr2 */ + } else { /* (*(u32 *)skb->mac.raw == htonl(LWNG_CAPHDR_VERSION)) */ + memcpy(haddr, skb->mac.raw + + sizeof(struct linux_wlan_ng_cap_hdr) + 10, + ETH_ALEN); /* addr2 */ + } + return ETH_ALEN; +} + + +int hostap_80211_get_hdrlen(u16 fc) +{ + int hdrlen = 24; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) + hdrlen = 30; /* Addr4 */ + break; + case IEEE80211_FTYPE_CTL: + switch (WLAN_FC_GET_STYPE(fc)) { + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + default: + hdrlen = 16; + break; + } + break; + } + + return hdrlen; +} + + +struct net_device_stats *hostap_get_stats(struct net_device *dev) +{ + struct hostap_interface *iface; + iface = netdev_priv(dev); + return &iface->stats; +} + + +static int prism2_close(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (dev == local->ddev) { + prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); + } +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (!local->hostapd && dev == local->dev && + (!local->func->card_present || local->func->card_present(local)) && + local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER) + hostap_deauth_all_stas(dev, local->ap, 1); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + if (local->func->dev_close && local->func->dev_close(local)) + return 0; + + if (dev == local->dev) { + local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); + } + + if (netif_running(dev)) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + + flush_scheduled_work(); + + module_put(local->hw_module); + + local->num_dev_open--; + + if (dev != local->dev && local->dev->flags & IFF_UP && + local->master_dev_auto_open && local->num_dev_open == 1) { + /* Close master radio interface automatically if it was also + * opened automatically and we are now closing the last + * remaining non-master device. */ + dev_close(local->dev); + } + + return 0; +} + + +static int prism2_open(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: could not set interface UP - no PRI " + "f/w\n", dev->name); + return 1; + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + if (local->func->dev_open && local->func->dev_open(local)) + return 1; + + if (!try_module_get(local->hw_module)) + return -ENODEV; + local->num_dev_open++; + + if (!local->dev_enabled && local->func->hw_enable(dev, 1)) { + printk(KERN_WARNING "%s: could not enable MAC port\n", + dev->name); + prism2_close(dev); + return 1; + } + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + + if (dev != local->dev && !(local->dev->flags & IFF_UP)) { + /* Master radio interface is needed for all operation, so open + * it automatically when any virtual net_device is opened. */ + local->master_dev_auto_open = 1; + dev_open(local->dev); + } + + netif_device_attach(dev); + netif_start_queue(dev); + + return 0; +} + + +static int prism2_set_mac_address(struct net_device *dev, void *p) +{ + struct hostap_interface *iface; + local_info_t *local; + struct list_head *ptr; + struct sockaddr *addr = p; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data, + ETH_ALEN) < 0 || local->func->reset_port(dev)) + return -EINVAL; + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + memcpy(iface->dev->dev_addr, addr->sa_data, ETH_ALEN); + } + memcpy(local->dev->dev_addr, addr->sa_data, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + + return 0; +} + + +/* TODO: to be further implemented as soon as Prism2 fully supports + * GroupAddresses and correct documentation is available */ +void hostap_set_multicast_list_queue(void *data) +{ + struct net_device *dev = (struct net_device *) data; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc)) { + printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", + dev->name, local->is_promisc ? "en" : "dis"); + } +} + + +static void hostap_set_multicast_list(struct net_device *dev) +{ +#if 0 + /* FIX: promiscuous mode seems to be causing a lot of problems with + * some station firmware versions (FCSErr frames, invalid MACPort, etc. + * corrupted incoming frames). This code is now commented out while the + * problems are investigated. */ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) { + local->is_promisc = 1; + } else { + local->is_promisc = 0; + } + + schedule_work(&local->set_multicast_list_queue); +#endif +} + + +static int prism2_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + return 0; +} + + +static void prism2_tx_timeout(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_regs regs; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); + netif_stop_queue(local->dev); + + local->func->read_regs(dev, ®s); + printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " + "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n", + dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1, + regs.swsupport0); + + local->func->schedule_reset(local); +} + + +void hostap_setup_dev(struct net_device *dev, local_info_t *local, + int main_dev) +{ + struct hostap_interface *iface; + + iface = netdev_priv(dev); + ether_setup(dev); + + /* kernel callbacks */ + dev->get_stats = hostap_get_stats; + if (iface) { + /* Currently, we point to the proper spy_data only on + * the main_dev. This could be fixed. Jean II */ + iface->wireless_data.spy_data = &iface->spy_data; + dev->wireless_data = &iface->wireless_data; + } + dev->wireless_handlers = + (struct iw_handler_def *) &hostap_iw_handler_def; + dev->do_ioctl = hostap_ioctl; + dev->open = prism2_open; + dev->stop = prism2_close; + dev->hard_start_xmit = hostap_data_start_xmit; + dev->set_mac_address = prism2_set_mac_address; + dev->set_multicast_list = hostap_set_multicast_list; + dev->change_mtu = prism2_change_mtu; + dev->tx_timeout = prism2_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + dev->mtu = local->mtu; + if (!main_dev) { + /* use main radio device queue */ + dev->tx_queue_len = 0; + } + + SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops); + + netif_stop_queue(dev); +} + + +static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->apdev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); + + local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP, + rtnl_locked, local->ddev->name, + "ap"); + if (local->apdev == NULL) + return -ENOMEM; + + local->apdev->hard_start_xmit = hostap_mgmt_start_xmit; + local->apdev->type = ARPHRD_IEEE80211; + local->apdev->hard_header_parse = hostap_80211_header_parse; + + return 0; +} + + +static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->apdev, rtnl_locked, 1); + local->apdev = NULL; + + return 0; +} + + +static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->stadev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); + + local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA, + rtnl_locked, local->ddev->name, + "sta"); + if (local->stadev == NULL) + return -ENOMEM; + + return 0; +} + + +static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->stadev, rtnl_locked, 1); + local->stadev = NULL; + + return 0; +} + + +int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd(local, rtnl_locked); + if (ret == 0) + local->hostapd = 1; + } else { + local->hostapd = 0; + ret = hostap_disable_hostapd(local, rtnl_locked); + if (ret != 0) + local->hostapd = 1; + } + + return ret; +} + + +int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd_sta == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd_sta(local, rtnl_locked); + if (ret == 0) + local->hostapd_sta = 1; + } else { + local->hostapd_sta = 0; + ret = hostap_disable_hostapd_sta(local, rtnl_locked); + if (ret != 0) + local->hostapd_sta = 1; + } + + + return ret; +} + + +int prism2_update_comms_qual(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + struct hfa384x_comms_quality sq; + + iface = netdev_priv(dev); + local = iface->local; + if (!local->sta_fw_ver) + ret = -1; + else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { + if (local->func->get_rid(local->dev, + HFA384X_RID_DBMCOMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = (s16) le16_to_cpu(sq.comm_qual); + local->avg_signal = (s16) le16_to_cpu(sq.signal_level); + local->avg_noise = (s16) le16_to_cpu(sq.noise_level); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } else { + if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = le16_to_cpu(sq.comm_qual); + local->avg_signal = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.signal_level)); + local->avg_noise = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.noise_level)); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } + + return ret; +} + + +int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, + u8 *body, size_t bodylen) +{ + struct sk_buff *skb; + struct hostap_ieee80211_mgmt *mgmt; + struct hostap_skb_tx_data *meta; + struct net_device *dev = local->dev; + + skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen); + if (skb == NULL) + return -ENOMEM; + + mgmt = (struct hostap_ieee80211_mgmt *) + skb_put(skb, IEEE80211_MGMT_HDR_LEN); + memset(mgmt, 0, IEEE80211_MGMT_HDR_LEN); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); + memcpy(mgmt->da, dst, ETH_ALEN); + memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); + memcpy(mgmt->bssid, dst, ETH_ALEN); + if (body) + memcpy(skb_put(skb, bodylen), body, bodylen); + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = netdev_priv(dev); + + skb->dev = dev; + skb->mac.raw = skb->nh.raw = skb->data; + dev_queue_xmit(skb); + + return 0; +} + + +int prism2_sta_deauth(local_info_t *local, u16 reason) +{ + union iwreq_data wrqu; + int ret; + + if (local->iw_mode != IW_MODE_INFRA || + memcmp(local->bssid, "\x00\x00\x00\x00\x00\x00", ETH_ALEN) == 0 || + memcmp(local->bssid, "\x44\x44\x44\x44\x44\x44", ETH_ALEN) == 0) + return 0; + + reason = cpu_to_le16(reason); + ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + return ret; +} + + +struct proc_dir_entry *hostap_proc; + +static int __init hostap_init(void) +{ + if (proc_net != NULL) { + hostap_proc = proc_mkdir("hostap", proc_net); + if (!hostap_proc) + printk(KERN_WARNING "Failed to mkdir " + "/proc/net/hostap\n"); + } else + hostap_proc = NULL; + + return 0; +} + + +static void __exit hostap_exit(void) +{ + if (hostap_proc != NULL) { + hostap_proc = NULL; + remove_proc_entry("hostap", proc_net); + } +} + + +EXPORT_SYMBOL(hostap_set_word); +EXPORT_SYMBOL(hostap_set_string); +EXPORT_SYMBOL(hostap_get_porttype); +EXPORT_SYMBOL(hostap_set_encryption); +EXPORT_SYMBOL(hostap_set_antsel); +EXPORT_SYMBOL(hostap_set_roaming); +EXPORT_SYMBOL(hostap_set_auth_algs); +EXPORT_SYMBOL(hostap_dump_rx_header); +EXPORT_SYMBOL(hostap_dump_tx_header); +EXPORT_SYMBOL(hostap_80211_header_parse); +EXPORT_SYMBOL(hostap_80211_prism_header_parse); +EXPORT_SYMBOL(hostap_80211_get_hdrlen); +EXPORT_SYMBOL(hostap_get_stats); +EXPORT_SYMBOL(hostap_setup_dev); +EXPORT_SYMBOL(hostap_proc); +EXPORT_SYMBOL(hostap_set_multicast_list_queue); +EXPORT_SYMBOL(hostap_set_hostapd); +EXPORT_SYMBOL(hostap_set_hostapd_sta); +EXPORT_SYMBOL(hostap_add_interface); +EXPORT_SYMBOL(hostap_remove_interface); +EXPORT_SYMBOL(prism2_update_comms_qual); + +module_init(hostap_init); +module_exit(hostap_exit); diff --git a/drivers/net/wireless/hostap/hostap.h b/drivers/net/wireless/hostap/hostap.h new file mode 100644 index 00000000000..5fac89b8ce3 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap.h @@ -0,0 +1,57 @@ +#ifndef HOSTAP_H +#define HOSTAP_H + +/* hostap.c */ + +extern struct proc_dir_entry *hostap_proc; + +u16 hostap_tx_callback_register(local_info_t *local, + void (*func)(struct sk_buff *, int ok, void *), + void *data); +int hostap_tx_callback_unregister(local_info_t *local, u16 idx); +int hostap_set_word(struct net_device *dev, int rid, u16 val); +int hostap_set_string(struct net_device *dev, int rid, const char *val); +u16 hostap_get_porttype(local_info_t *local); +int hostap_set_encryption(local_info_t *local); +int hostap_set_antsel(local_info_t *local); +int hostap_set_roaming(local_info_t *local); +int hostap_set_auth_algs(local_info_t *local); +void hostap_dump_rx_header(const char *name, + const struct hfa384x_rx_frame *rx); +void hostap_dump_tx_header(const char *name, + const struct hfa384x_tx_frame *tx); +int hostap_80211_header_parse(struct sk_buff *skb, unsigned char *haddr); +int hostap_80211_prism_header_parse(struct sk_buff *skb, unsigned char *haddr); +int hostap_80211_get_hdrlen(u16 fc); +struct net_device_stats *hostap_get_stats(struct net_device *dev); +void hostap_setup_dev(struct net_device *dev, local_info_t *local, + int main_dev); +void hostap_set_multicast_list_queue(void *data); +int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked); +int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked); +void hostap_cleanup(local_info_t *local); +void hostap_cleanup_handler(void *data); +struct net_device * hostap_add_interface(struct local_info *local, + int type, int rtnl_locked, + const char *prefix, const char *name); +void hostap_remove_interface(struct net_device *dev, int rtnl_locked, + int remove_from_list); +int prism2_update_comms_qual(struct net_device *dev); +int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, + u8 *body, size_t bodylen); +int prism2_sta_deauth(local_info_t *local, u16 reason); + + +/* hostap_proc.c */ + +void hostap_init_proc(local_info_t *local); +void hostap_remove_proc(local_info_t *local); + + +/* hostap_info.c */ + +void hostap_info_init(local_info_t *local); +void hostap_info_process(local_info_t *local, struct sk_buff *skb); + + +#endif /* HOSTAP_H */ diff --git a/drivers/net/wireless/hostap/hostap_80211.h b/drivers/net/wireless/hostap/hostap_80211.h new file mode 100644 index 00000000000..bf506f50d72 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_80211.h @@ -0,0 +1,96 @@ +#ifndef HOSTAP_80211_H +#define HOSTAP_80211_H + +struct hostap_ieee80211_mgmt { + u16 frame_control; + u16 duration; + u8 da[6]; + u8 sa[6]; + u8 bssid[6]; + u16 seq_ctrl; + union { + struct { + u16 auth_alg; + u16 auth_transaction; + u16 status_code; + /* possibly followed by Challenge text */ + u8 variable[0]; + } __attribute__ ((packed)) auth; + struct { + u16 reason_code; + } __attribute__ ((packed)) deauth; + struct { + u16 capab_info; + u16 listen_interval; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_req; + struct { + u16 capab_info; + u16 status_code; + u16 aid; + /* followed by Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_resp, reassoc_resp; + struct { + u16 capab_info; + u16 listen_interval; + u8 current_ap[6]; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) reassoc_req; + struct { + u16 reason_code; + } __attribute__ ((packed)) disassoc; + struct { + } __attribute__ ((packed)) probe_req; + struct { + u8 timestamp[8]; + u16 beacon_int; + u16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params, TIM */ + u8 variable[0]; + } __attribute__ ((packed)) beacon, probe_resp; + } u; +} __attribute__ ((packed)); + + +#define IEEE80211_MGMT_HDR_LEN 24 +#define IEEE80211_DATA_HDR3_LEN 24 +#define IEEE80211_DATA_HDR4_LEN 30 + + +struct hostap_80211_rx_status { + u32 mac_time; + u8 signal; + u8 noise; + u16 rate; /* in 100 kbps */ +}; + + +void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); + + +/* prism2_rx_80211 'type' argument */ +enum { + PRISM2_RX_MONITOR, PRISM2_RX_MGMT, PRISM2_RX_NON_ASSOC, + PRISM2_RX_NULLFUNC_ACK +}; + +int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int type); +void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); +void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); + +void hostap_dump_tx_80211(const char *name, struct sk_buff *skb); +int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev); +int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev); +struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, + struct ieee80211_crypt_data *crypt); +int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev); + +#endif /* HOSTAP_80211_H */ diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c new file mode 100644 index 00000000000..b0501243b17 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -0,0 +1,1091 @@ +#include <linux/etherdevice.h> + +#include "hostap_80211.h" +#include "hostap.h" + +void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct ieee80211_hdr *hdr; + u16 fc; + + hdr = (struct ieee80211_hdr *) skb->data; + + printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " + "jiffies=%ld\n", + name, rx_stats->signal, rx_stats->noise, rx_stats->rate, + skb->len, jiffies); + + if (skb->len < 2) + return; + + fc = le16_to_cpu(hdr->frame_ctl); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + printk("\n"); + return; + } + + printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), + le16_to_cpu(hdr->seq_ctl)); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR, + MAC2STR(hdr->addr1), MAC2STR(hdr->addr2), MAC2STR(hdr->addr3)); + if (skb->len >= 30) + printk(" A4=" MACSTR, MAC2STR(hdr->addr4)); + printk("\n"); +} + + +/* Send RX frame to netif with 802.11 (and possible prism) header. + * Called from hardware or software IRQ context. */ +int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int type) +{ + struct hostap_interface *iface; + local_info_t *local; + int hdrlen, phdrlen, head_need, tail_need; + u16 fc; + int prism_header, ret; + struct ieee80211_hdr *hdr; + + iface = netdev_priv(dev); + local = iface->local; + dev->last_rx = jiffies; + + if (dev->type == ARPHRD_IEEE80211_PRISM) { + if (local->monitor_type == PRISM2_MONITOR_PRISM) { + prism_header = 1; + phdrlen = sizeof(struct linux_wlan_ng_prism_hdr); + } else { /* local->monitor_type == PRISM2_MONITOR_CAPHDR */ + prism_header = 2; + phdrlen = sizeof(struct linux_wlan_ng_cap_hdr); + } + } else { + prism_header = 0; + phdrlen = 0; + } + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + + if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { + printk(KERN_DEBUG "%s: dropped management frame with header " + "version %d\n", dev->name, fc & IEEE80211_FCTL_VERS); + dev_kfree_skb_any(skb); + return 0; + } + + hdrlen = hostap_80211_get_hdrlen(fc); + + /* check if there is enough room for extra data; if not, expand skb + * buffer to be large enough for the changes */ + head_need = phdrlen; + tail_need = 0; +#ifdef PRISM2_ADD_BOGUS_CRC + tail_need += 4; +#endif /* PRISM2_ADD_BOGUS_CRC */ + + head_need -= skb_headroom(skb); + tail_need -= skb_tailroom(skb); + + if (head_need > 0 || tail_need > 0) { + if (pskb_expand_head(skb, head_need > 0 ? head_need : 0, + tail_need > 0 ? tail_need : 0, + GFP_ATOMIC)) { + printk(KERN_DEBUG "%s: prism2_rx_80211 failed to " + "reallocate skb buffer\n", dev->name); + dev_kfree_skb_any(skb); + return 0; + } + } + + /* We now have an skb with enough head and tail room, so just insert + * the extra data */ + +#ifdef PRISM2_ADD_BOGUS_CRC + memset(skb_put(skb, 4), 0xff, 4); /* Prism2 strips CRC */ +#endif /* PRISM2_ADD_BOGUS_CRC */ + + if (prism_header == 1) { + struct linux_wlan_ng_prism_hdr *hdr; + hdr = (struct linux_wlan_ng_prism_hdr *) + skb_push(skb, phdrlen); + memset(hdr, 0, phdrlen); + hdr->msgcode = LWNG_CAP_DID_BASE; + hdr->msglen = sizeof(*hdr); + memcpy(hdr->devname, dev->name, sizeof(hdr->devname)); +#define LWNG_SETVAL(f,i,s,l,d) \ +hdr->f.did = LWNG_CAP_DID_BASE | (i << 12); \ +hdr->f.status = s; hdr->f.len = l; hdr->f.data = d + LWNG_SETVAL(hosttime, 1, 0, 4, jiffies); + LWNG_SETVAL(mactime, 2, 0, 4, rx_stats->mac_time); + LWNG_SETVAL(channel, 3, 1 /* no value */, 4, 0); + LWNG_SETVAL(rssi, 4, 1 /* no value */, 4, 0); + LWNG_SETVAL(sq, 5, 1 /* no value */, 4, 0); + LWNG_SETVAL(signal, 6, 0, 4, rx_stats->signal); + LWNG_SETVAL(noise, 7, 0, 4, rx_stats->noise); + LWNG_SETVAL(rate, 8, 0, 4, rx_stats->rate / 5); + LWNG_SETVAL(istx, 9, 0, 4, 0); + LWNG_SETVAL(frmlen, 10, 0, 4, skb->len - phdrlen); +#undef LWNG_SETVAL + } else if (prism_header == 2) { + struct linux_wlan_ng_cap_hdr *hdr; + hdr = (struct linux_wlan_ng_cap_hdr *) + skb_push(skb, phdrlen); + memset(hdr, 0, phdrlen); + hdr->version = htonl(LWNG_CAPHDR_VERSION); + hdr->length = htonl(phdrlen); + hdr->mactime = __cpu_to_be64(rx_stats->mac_time); + hdr->hosttime = __cpu_to_be64(jiffies); + hdr->phytype = htonl(4); /* dss_dot11_b */ + hdr->channel = htonl(local->channel); + hdr->datarate = htonl(rx_stats->rate); + hdr->antenna = htonl(0); /* unknown */ + hdr->priority = htonl(0); /* unknown */ + hdr->ssi_type = htonl(3); /* raw */ + hdr->ssi_signal = htonl(rx_stats->signal); + hdr->ssi_noise = htonl(rx_stats->noise); + hdr->preamble = htonl(0); /* unknown */ + hdr->encoding = htonl(1); /* cck */ + } + + ret = skb->len - phdrlen; + skb->dev = dev; + skb->mac.raw = skb->data; + skb_pull(skb, hdrlen); + if (prism_header) + skb_pull(skb, phdrlen); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = __constant_htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +static void monitor_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device_stats *stats; + int len; + + len = prism2_rx_80211(dev, skb, rx_stats, PRISM2_RX_MONITOR); + stats = hostap_get_stats(dev); + stats->rx_packets++; + stats->rx_bytes += len; +} + + +/* Called only as a tasklet (software IRQ) */ +static struct prism2_frag_entry * +prism2_frag_cache_find(local_info_t *local, unsigned int seq, + unsigned int frag, u8 *src, u8 *dst) +{ + struct prism2_frag_entry *entry; + int i; + + for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { + entry = &local->frag_cache[i]; + if (entry->skb != NULL && + time_after(jiffies, entry->first_frag_time + 2 * HZ)) { + printk(KERN_DEBUG "%s: expiring fragment cache entry " + "seq=%u last_frag=%u\n", + local->dev->name, entry->seq, entry->last_frag); + dev_kfree_skb(entry->skb); + entry->skb = NULL; + } + + if (entry->skb != NULL && entry->seq == seq && + (entry->last_frag + 1 == frag || frag == -1) && + memcmp(entry->src_addr, src, ETH_ALEN) == 0 && + memcmp(entry->dst_addr, dst, ETH_ALEN) == 0) + return entry; + } + + return NULL; +} + + +/* Called only as a tasklet (software IRQ) */ +static struct sk_buff * +prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) +{ + struct sk_buff *skb = NULL; + u16 sc; + unsigned int frag, seq; + struct prism2_frag_entry *entry; + + sc = le16_to_cpu(hdr->seq_ctl); + frag = WLAN_GET_SEQ_FRAG(sc); + seq = WLAN_GET_SEQ_SEQ(sc) >> 4; + + if (frag == 0) { + /* Reserve enough space to fit maximum frame length */ + skb = dev_alloc_skb(local->dev->mtu + + sizeof(struct ieee80211_hdr) + + 8 /* LLC */ + + 2 /* alignment */ + + 8 /* WEP */ + ETH_ALEN /* WDS */); + if (skb == NULL) + return NULL; + + entry = &local->frag_cache[local->frag_next_idx]; + local->frag_next_idx++; + if (local->frag_next_idx >= PRISM2_FRAG_CACHE_LEN) + local->frag_next_idx = 0; + + if (entry->skb != NULL) + dev_kfree_skb(entry->skb); + + entry->first_frag_time = jiffies; + entry->seq = seq; + entry->last_frag = frag; + entry->skb = skb; + memcpy(entry->src_addr, hdr->addr2, ETH_ALEN); + memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN); + } else { + /* received a fragment of a frame for which the head fragment + * should have already been received */ + entry = prism2_frag_cache_find(local, seq, frag, hdr->addr2, + hdr->addr1); + if (entry != NULL) { + entry->last_frag = frag; + skb = entry->skb; + } + } + + return skb; +} + + +/* Called only as a tasklet (software IRQ) */ +static int prism2_frag_cache_invalidate(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + u16 sc; + unsigned int seq; + struct prism2_frag_entry *entry; + + sc = le16_to_cpu(hdr->seq_ctl); + seq = WLAN_GET_SEQ_SEQ(sc) >> 4; + + entry = prism2_frag_cache_find(local, seq, -1, hdr->addr2, hdr->addr1); + + if (entry == NULL) { + printk(KERN_DEBUG "%s: could not invalidate fragment cache " + "entry (seq=%u)\n", + local->dev->name, seq); + return -1; + } + + entry->skb = NULL; + return 0; +} + + +static struct hostap_bss_info *__hostap_get_bss(local_info_t *local, u8 *bssid, + u8 *ssid, size_t ssid_len) +{ + struct list_head *ptr; + struct hostap_bss_info *bss; + + list_for_each(ptr, &local->bss_list) { + bss = list_entry(ptr, struct hostap_bss_info, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0 && + (ssid == NULL || + (ssid_len == bss->ssid_len && + memcmp(ssid, bss->ssid, ssid_len) == 0))) { + list_move(&bss->list, &local->bss_list); + return bss; + } + } + + return NULL; +} + + +static struct hostap_bss_info *__hostap_add_bss(local_info_t *local, u8 *bssid, + u8 *ssid, size_t ssid_len) +{ + struct hostap_bss_info *bss; + + if (local->num_bss_info >= HOSTAP_MAX_BSS_COUNT) { + bss = list_entry(local->bss_list.prev, + struct hostap_bss_info, list); + list_del(&bss->list); + local->num_bss_info--; + } else { + bss = (struct hostap_bss_info *) + kmalloc(sizeof(*bss), GFP_ATOMIC); + if (bss == NULL) + return NULL; + } + + memset(bss, 0, sizeof(*bss)); + memcpy(bss->bssid, bssid, ETH_ALEN); + memcpy(bss->ssid, ssid, ssid_len); + bss->ssid_len = ssid_len; + local->num_bss_info++; + list_add(&bss->list, &local->bss_list); + return bss; +} + + +static void __hostap_expire_bss(local_info_t *local) +{ + struct hostap_bss_info *bss; + + while (local->num_bss_info > 0) { + bss = list_entry(local->bss_list.prev, + struct hostap_bss_info, list); + if (!time_after(jiffies, bss->last_update + 60 * HZ)) + break; + + list_del(&bss->list); + local->num_bss_info--; + kfree(bss); + } +} + + +/* Both IEEE 802.11 Beacon and Probe Response frames have similar structure, so + * the same routine can be used to parse both of them. */ +static void hostap_rx_sta_beacon(local_info_t *local, struct sk_buff *skb, + int stype) +{ + struct hostap_ieee80211_mgmt *mgmt; + int left, chan = 0; + u8 *pos; + u8 *ssid = NULL, *wpa = NULL, *rsn = NULL; + size_t ssid_len = 0, wpa_len = 0, rsn_len = 0; + struct hostap_bss_info *bss; + + if (skb->len < IEEE80211_MGMT_HDR_LEN + sizeof(mgmt->u.beacon)) + return; + + mgmt = (struct hostap_ieee80211_mgmt *) skb->data; + pos = mgmt->u.beacon.variable; + left = skb->len - (pos - skb->data); + + while (left >= 2) { + if (2 + pos[1] > left) + return; /* parse failed */ + switch (*pos) { + case WLAN_EID_SSID: + ssid = pos + 2; + ssid_len = pos[1]; + break; + case WLAN_EID_GENERIC: + if (pos[1] >= 4 && + pos[2] == 0x00 && pos[3] == 0x50 && + pos[4] == 0xf2 && pos[5] == 1) { + wpa = pos; + wpa_len = pos[1] + 2; + } + break; + case WLAN_EID_RSN: + rsn = pos; + rsn_len = pos[1] + 2; + break; + case WLAN_EID_DS_PARAMS: + if (pos[1] >= 1) + chan = pos[2]; + break; + } + left -= 2 + pos[1]; + pos += 2 + pos[1]; + } + + if (wpa_len > MAX_WPA_IE_LEN) + wpa_len = MAX_WPA_IE_LEN; + if (rsn_len > MAX_WPA_IE_LEN) + rsn_len = MAX_WPA_IE_LEN; + if (ssid_len > sizeof(bss->ssid)) + ssid_len = sizeof(bss->ssid); + + spin_lock(&local->lock); + bss = __hostap_get_bss(local, mgmt->bssid, ssid, ssid_len); + if (bss == NULL) + bss = __hostap_add_bss(local, mgmt->bssid, ssid, ssid_len); + if (bss) { + bss->last_update = jiffies; + bss->count++; + bss->capab_info = le16_to_cpu(mgmt->u.beacon.capab_info); + if (wpa) { + memcpy(bss->wpa_ie, wpa, wpa_len); + bss->wpa_ie_len = wpa_len; + } else + bss->wpa_ie_len = 0; + if (rsn) { + memcpy(bss->rsn_ie, rsn, rsn_len); + bss->rsn_ie_len = rsn_len; + } else + bss->rsn_ie_len = 0; + bss->chan = chan; + } + __hostap_expire_bss(local); + spin_unlock(&local->lock); +} + + +static inline int +hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, u16 type, + u16 stype) +{ + if (local->iw_mode == IW_MODE_MASTER) { + hostap_update_sta_ps(local, (struct ieee80211_hdr *) + skb->data); + } + + if (local->hostapd && type == IEEE80211_FTYPE_MGMT) { + if (stype == IEEE80211_STYPE_BEACON && + local->iw_mode == IW_MODE_MASTER) { + struct sk_buff *skb2; + /* Process beacon frames also in kernel driver to + * update STA(AP) table statistics */ + skb2 = skb_clone(skb, GFP_ATOMIC); + if (skb2) + hostap_rx(skb2->dev, skb2, rx_stats); + } + + /* send management frames to the user space daemon for + * processing */ + local->apdevstats.rx_packets++; + local->apdevstats.rx_bytes += skb->len; + if (local->apdev == NULL) + return -1; + prism2_rx_80211(local->apdev, skb, rx_stats, PRISM2_RX_MGMT); + return 0; + } + + if (local->iw_mode == IW_MODE_MASTER) { + if (type != IEEE80211_FTYPE_MGMT && + type != IEEE80211_FTYPE_CTL) { + printk(KERN_DEBUG "%s: unknown management frame " + "(type=0x%02x, stype=0x%02x) dropped\n", + skb->dev->name, type >> 2, stype >> 4); + return -1; + } + + hostap_rx(skb->dev, skb, rx_stats); + return 0; + } else if (type == IEEE80211_FTYPE_MGMT && + (stype == IEEE80211_STYPE_BEACON || + stype == IEEE80211_STYPE_PROBE_RESP)) { + hostap_rx_sta_beacon(local, skb, stype); + return -1; + } else if (type == IEEE80211_FTYPE_MGMT && + (stype == IEEE80211_STYPE_ASSOC_RESP || + stype == IEEE80211_STYPE_REASSOC_RESP)) { + /* Ignore (Re)AssocResp silently since these are not currently + * needed but are still received when WPA/RSN mode is enabled. + */ + return -1; + } else { + printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: dropped unhandled" + " management frame in non-Host AP mode (type=%d:%d)\n", + skb->dev->name, type >> 2, stype >> 4); + return -1; + } +} + + +/* Called only as a tasklet (software IRQ) */ +static inline struct net_device *prism2_rx_get_wds(local_info_t *local, + u8 *addr) +{ + struct hostap_interface *iface = NULL; + struct list_head *ptr; + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_WDS && + memcmp(iface->u.wds.remote_addr, addr, ETH_ALEN) == 0) + break; + iface = NULL; + } + read_unlock_bh(&local->iface_lock); + + return iface ? iface->dev : NULL; +} + + +static inline int +hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, + u16 fc, struct net_device **wds) +{ + /* FIX: is this really supposed to accept WDS frames only in Master + * mode? What about Repeater or Managed with WDS frames? */ + if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) != + (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS) && + (local->iw_mode != IW_MODE_MASTER || !(fc & IEEE80211_FCTL_TODS))) + return 0; /* not a WDS frame */ + + /* Possible WDS frame: either IEEE 802.11 compliant (if FromDS) + * or own non-standard frame with 4th address after payload */ + if (memcmp(hdr->addr1, local->dev->dev_addr, ETH_ALEN) != 0 && + (hdr->addr1[0] != 0xff || hdr->addr1[1] != 0xff || + hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || + hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { + /* RA (or BSSID) is not ours - drop */ + PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with " + "not own or broadcast %s=" MACSTR "\n", + local->dev->name, + fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", + MAC2STR(hdr->addr1)); + return -1; + } + + /* check if the frame came from a registered WDS connection */ + *wds = prism2_rx_get_wds(local, hdr->addr2); + if (*wds == NULL && fc & IEEE80211_FCTL_FROMDS && + (local->iw_mode != IW_MODE_INFRA || + !(local->wds_type & HOSTAP_WDS_AP_CLIENT) || + memcmp(hdr->addr2, local->bssid, ETH_ALEN) != 0)) { + /* require that WDS link has been registered with TA or the + * frame is from current AP when using 'AP client mode' */ + PDEBUG(DEBUG_EXTRA, "%s: received WDS[4 addr] frame " + "from unknown TA=" MACSTR "\n", + local->dev->name, MAC2STR(hdr->addr2)); + if (local->ap && local->ap->autom_ap_wds) + hostap_wds_link_oper(local, hdr->addr2, WDS_ADD); + return -1; + } + + if (*wds && !(fc & IEEE80211_FCTL_FROMDS) && local->ap && + hostap_is_sta_assoc(local->ap, hdr->addr2)) { + /* STA is actually associated with us even though it has a + * registered WDS link. Assume it is in 'AP client' mode. + * Since this is a 3-addr frame, assume it is not (bogus) WDS + * frame and process it like any normal ToDS frame from + * associated STA. */ + *wds = NULL; + } + + return 0; +} + + +static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb) +{ + struct net_device *dev = local->dev; + u16 fc, ethertype; + struct ieee80211_hdr *hdr; + u8 *pos; + + if (skb->len < 24) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + + /* check that the frame is unicast frame to us */ + if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_TODS && + memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 && + memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) { + /* ToDS frame with own addr BSSID and DA */ + } else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_FROMDS && + memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) { + /* FromDS frame with own addr as DA */ + } else + return 0; + + if (skb->len < 24 + 8) + return 0; + + /* check for port access entity Ethernet type */ + pos = skb->data + 24; + ethertype = (pos[6] << 8) | pos[7]; + if (ethertype == ETH_P_PAE) + return 1; + + return 0; +} + + +/* Called only as a tasklet (software IRQ) */ +static inline int +hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb, + struct ieee80211_crypt_data *crypt) +{ + struct ieee80211_hdr *hdr; + int res, hdrlen; + + if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); + + if (local->tkip_countermeasures && + strcmp(crypt->ops->name, "TKIP") == 0) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "received packet from " MACSTR "\n", + local->dev->name, MAC2STR(hdr->addr2)); + } + return -1; + } + + atomic_inc(&crypt->refcnt); + res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + printk(KERN_DEBUG "%s: decryption failed (SA=" MACSTR + ") res=%d\n", + local->dev->name, MAC2STR(hdr->addr2), res); + local->comm_tallies.rx_discards_wep_undecryptable++; + return -1; + } + + return res; +} + + +/* Called only as a tasklet (software IRQ) */ +static inline int +hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb, + int keyidx, struct ieee80211_crypt_data *crypt) +{ + struct ieee80211_hdr *hdr; + int res, hdrlen; + + if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); + + atomic_inc(&crypt->refcnt); + res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" + " (SA=" MACSTR " keyidx=%d)\n", + local->dev->name, MAC2STR(hdr->addr2), keyidx); + return -1; + } + + return 0; +} + + +/* All received frames are sent to this function. @skb contains the frame in + * IEEE 802.11 format, i.e., in the format it was sent over air. + * This function is called only as a tasklet (software IRQ). */ +void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + size_t hdrlen; + u16 fc, type, stype, sc; + struct net_device *wds = NULL; + struct net_device_stats *stats; + unsigned int frag; + u8 *payload; + struct sk_buff *skb2 = NULL; + u16 ethertype; + int frame_authorized = 0; + int from_assoc_ap = 0; + u8 dst[ETH_ALEN]; + u8 src[ETH_ALEN]; + struct ieee80211_crypt_data *crypt = NULL; + void *sta = NULL; + int keyidx = 0; + + iface = netdev_priv(dev); + local = iface->local; + iface->stats.rx_packets++; + iface->stats.rx_bytes += skb->len; + + /* dev is the master radio device; change this to be the default + * virtual interface (this may be changed to WDS device below) */ + dev = local->ddev; + iface = netdev_priv(dev); + + hdr = (struct ieee80211_hdr *) skb->data; + stats = hostap_get_stats(dev); + + if (skb->len < 10) + goto rx_dropped; + + fc = le16_to_cpu(hdr->frame_ctl); + type = WLAN_FC_GET_TYPE(fc); + stype = WLAN_FC_GET_STYPE(fc); + sc = le16_to_cpu(hdr->seq_ctl); + frag = WLAN_GET_SEQ_FRAG(sc); + hdrlen = hostap_80211_get_hdrlen(fc); + + /* Put this code here so that we avoid duplicating it in all + * Rx paths. - Jean II */ +#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ + /* If spy monitoring on */ + if (iface->spy_data.spy_number > 0) { + struct iw_quality wstats; + wstats.level = rx_stats->signal; + wstats.noise = rx_stats->noise; + wstats.updated = 6; /* No qual value */ + /* Update spy records */ + wireless_spy_update(dev, hdr->addr2, &wstats); + } +#endif /* IW_WIRELESS_SPY */ + hostap_update_rx_stats(local->ap, hdr, rx_stats); + + if (local->iw_mode == IW_MODE_MONITOR) { + monitor_rx(dev, skb, rx_stats); + return; + } + + if (local->host_decrypt) { + int idx = 0; + if (skb->len >= hdrlen + 3) + idx = skb->data[hdrlen + 3] >> 6; + crypt = local->crypt[idx]; + sta = NULL; + + /* Use station specific key to override default keys if the + * receiver address is a unicast address ("individual RA"). If + * bcrx_sta_key parameter is set, station specific key is used + * even with broad/multicast targets (this is against IEEE + * 802.11, but makes it easier to use different keys with + * stations that do not support WEP key mapping). */ + + if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key) + (void) hostap_handle_sta_crypto(local, hdr, &crypt, + &sta); + + /* allow NULL decrypt to indicate an station specific override + * for default encryption */ + if (crypt && (crypt->ops == NULL || + crypt->ops->decrypt_mpdu == NULL)) + crypt = NULL; + + if (!crypt && (fc & IEEE80211_FCTL_PROTECTED)) { +#if 0 + /* This seems to be triggered by some (multicast?) + * frames from other than current BSS, so just drop the + * frames silently instead of filling system log with + * these reports. */ + printk(KERN_DEBUG "%s: WEP decryption failed (not set)" + " (SA=" MACSTR ")\n", + local->dev->name, MAC2STR(hdr->addr2)); +#endif + local->comm_tallies.rx_discards_wep_undecryptable++; + goto rx_dropped; + } + } + + if (type != IEEE80211_FTYPE_DATA) { + if (type == IEEE80211_FTYPE_MGMT && + stype == IEEE80211_STYPE_AUTH && + fc & IEEE80211_FCTL_PROTECTED && local->host_decrypt && + (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) + { + printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " + "from " MACSTR "\n", dev->name, + MAC2STR(hdr->addr2)); + /* TODO: could inform hostapd about this so that it + * could send auth failure report */ + goto rx_dropped; + } + + if (hostap_rx_frame_mgmt(local, skb, rx_stats, type, stype)) + goto rx_dropped; + else + goto rx_exit; + } + + /* Data frame - extract src/dst addresses */ + if (skb->len < IEEE80211_DATA_HDR3_LEN) + goto rx_dropped; + + switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) { + case IEEE80211_FCTL_FROMDS: + memcpy(dst, hdr->addr1, ETH_ALEN); + memcpy(src, hdr->addr3, ETH_ALEN); + break; + case IEEE80211_FCTL_TODS: + memcpy(dst, hdr->addr3, ETH_ALEN); + memcpy(src, hdr->addr2, ETH_ALEN); + break; + case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS: + if (skb->len < IEEE80211_DATA_HDR4_LEN) + goto rx_dropped; + memcpy(dst, hdr->addr3, ETH_ALEN); + memcpy(src, hdr->addr4, ETH_ALEN); + break; + case 0: + memcpy(dst, hdr->addr1, ETH_ALEN); + memcpy(src, hdr->addr2, ETH_ALEN); + break; + } + + if (hostap_rx_frame_wds(local, hdr, fc, &wds)) + goto rx_dropped; + if (wds) { + skb->dev = dev = wds; + stats = hostap_get_stats(dev); + } + + if (local->iw_mode == IW_MODE_MASTER && !wds && + (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_FROMDS && + local->stadev && + memcmp(hdr->addr2, local->assoc_ap_addr, ETH_ALEN) == 0) { + /* Frame from BSSID of the AP for which we are a client */ + skb->dev = dev = local->stadev; + stats = hostap_get_stats(dev); + from_assoc_ap = 1; + } + + dev->last_rx = jiffies; + + if ((local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT) && + !from_assoc_ap) { + switch (hostap_handle_sta_rx(local, dev, skb, rx_stats, + wds != NULL)) { + case AP_RX_CONTINUE_NOT_AUTHORIZED: + frame_authorized = 0; + break; + case AP_RX_CONTINUE: + frame_authorized = 1; + break; + case AP_RX_DROP: + goto rx_dropped; + case AP_RX_EXIT: + goto rx_exit; + } + } + + /* Nullfunc frames may have PS-bit set, so they must be passed to + * hostap_handle_sta_rx() before being dropped here. */ + if (stype != IEEE80211_STYPE_DATA && + stype != IEEE80211_STYPE_DATA_CFACK && + stype != IEEE80211_STYPE_DATA_CFPOLL && + stype != IEEE80211_STYPE_DATA_CFACKPOLL) { + if (stype != IEEE80211_STYPE_NULLFUNC) + printk(KERN_DEBUG "%s: RX: dropped data frame " + "with no data (type=0x%02x, subtype=0x%02x)\n", + dev->name, type >> 2, stype >> 4); + goto rx_dropped; + } + + /* skb: hdr + (possibly fragmented, possibly encrypted) payload */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) + goto rx_dropped; + hdr = (struct ieee80211_hdr *) skb->data; + + /* skb: hdr + (possibly fragmented) plaintext payload */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + (frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) { + int flen; + struct sk_buff *frag_skb = + prism2_frag_cache_get(local, hdr); + if (!frag_skb) { + printk(KERN_DEBUG "%s: Rx cannot get skb from " + "fragment cache (morefrag=%d seq=%u frag=%u)\n", + dev->name, (fc & IEEE80211_FCTL_MOREFRAGS) != 0, + WLAN_GET_SEQ_SEQ(sc) >> 4, frag); + goto rx_dropped; + } + + flen = skb->len; + if (frag != 0) + flen -= hdrlen; + + if (frag_skb->tail + flen > frag_skb->end) { + printk(KERN_WARNING "%s: host decrypted and " + "reassembled frame did not fit skb\n", + dev->name); + prism2_frag_cache_invalidate(local, hdr); + goto rx_dropped; + } + + if (frag == 0) { + /* copy first fragment (including full headers) into + * beginning of the fragment cache skb */ + memcpy(skb_put(frag_skb, flen), skb->data, flen); + } else { + /* append frame payload to the end of the fragment + * cache skb */ + memcpy(skb_put(frag_skb, flen), skb->data + hdrlen, + flen); + } + dev_kfree_skb(skb); + skb = NULL; + + if (fc & IEEE80211_FCTL_MOREFRAGS) { + /* more fragments expected - leave the skb in fragment + * cache for now; it will be delivered to upper layers + * after all fragments have been received */ + goto rx_exit; + } + + /* this was the last fragment and the frame will be + * delivered, so remove skb from fragment cache */ + skb = frag_skb; + hdr = (struct ieee80211_hdr *) skb->data; + prism2_frag_cache_invalidate(local, hdr); + } + + /* skb: hdr + (possible reassembled) full MSDU payload; possibly still + * encrypted/authenticated */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt)) + goto rx_dropped; + + hdr = (struct ieee80211_hdr *) skb->data; + if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) { + if (local->ieee_802_1x && + hostap_is_eapol_frame(local, skb)) { + /* pass unencrypted EAPOL frames even if encryption is + * configured */ + PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X - passing " + "unencrypted EAPOL frame\n", local->dev->name); + } else { + printk(KERN_DEBUG "%s: encryption configured, but RX " + "frame not encrypted (SA=" MACSTR ")\n", + local->dev->name, MAC2STR(hdr->addr2)); + goto rx_dropped; + } + } + + if (local->drop_unencrypted && !(fc & IEEE80211_FCTL_PROTECTED) && + !hostap_is_eapol_frame(local, skb)) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: dropped unencrypted RX data " + "frame from " MACSTR " (drop_unencrypted=1)\n", + dev->name, MAC2STR(hdr->addr2)); + } + goto rx_dropped; + } + + /* skb: hdr + (possible reassembled) full plaintext payload */ + + payload = skb->data + hdrlen; + ethertype = (payload[6] << 8) | payload[7]; + + /* If IEEE 802.1X is used, check whether the port is authorized to send + * the received frame. */ + if (local->ieee_802_1x && local->iw_mode == IW_MODE_MASTER) { + if (ethertype == ETH_P_PAE) { + PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X frame\n", + dev->name); + if (local->hostapd && local->apdev) { + /* Send IEEE 802.1X frames to the user + * space daemon for processing */ + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_MGMT); + local->apdevstats.rx_packets++; + local->apdevstats.rx_bytes += skb->len; + goto rx_exit; + } + } else if (!frame_authorized) { + printk(KERN_DEBUG "%s: dropped frame from " + "unauthorized port (IEEE 802.1X): " + "ethertype=0x%04x\n", + dev->name, ethertype); + goto rx_dropped; + } + } + + /* convert hdr + possible LLC headers into Ethernet header */ + if (skb->len - hdrlen >= 8 && + ((memcmp(payload, rfc1042_header, 6) == 0 && + ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || + memcmp(payload, bridge_tunnel_header, 6) == 0)) { + /* remove RFC1042 or Bridge-Tunnel encapsulation and + * replace EtherType */ + skb_pull(skb, hdrlen + 6); + memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); + memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); + } else { + u16 len; + /* Leave Ethernet header part of hdr and full payload */ + skb_pull(skb, hdrlen); + len = htons(skb->len); + memcpy(skb_push(skb, 2), &len, 2); + memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); + memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); + } + + if (wds && ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_TODS) && + skb->len >= ETH_HLEN + ETH_ALEN) { + /* Non-standard frame: get addr4 from its bogus location after + * the payload */ + memcpy(skb->data + ETH_ALEN, + skb->data + skb->len - ETH_ALEN, ETH_ALEN); + skb_trim(skb, skb->len - ETH_ALEN); + } + + stats->rx_packets++; + stats->rx_bytes += skb->len; + + if (local->iw_mode == IW_MODE_MASTER && !wds && + local->ap->bridge_packets) { + if (dst[0] & 0x01) { + /* copy multicast frame both to the higher layers and + * to the wireless media */ + local->ap->bridged_multicast++; + skb2 = skb_clone(skb, GFP_ATOMIC); + if (skb2 == NULL) + printk(KERN_DEBUG "%s: skb_clone failed for " + "multicast frame\n", dev->name); + } else if (hostap_is_sta_authorized(local->ap, dst)) { + /* send frame directly to the associated STA using + * wireless media and not passing to higher layers */ + local->ap->bridged_unicast++; + skb2 = skb; + skb = NULL; + } + } + + if (skb2 != NULL) { + /* send to wireless media */ + skb2->protocol = __constant_htons(ETH_P_802_3); + skb2->mac.raw = skb2->nh.raw = skb2->data; + /* skb2->nh.raw = skb2->data + ETH_HLEN; */ + skb2->dev = dev; + dev_queue_xmit(skb2); + } + + if (skb) { + skb->protocol = eth_type_trans(skb, dev); + memset(skb->cb, 0, sizeof(skb->cb)); + skb->dev = dev; + netif_rx(skb); + } + + rx_exit: + if (sta) + hostap_handle_sta_release(sta); + return; + + rx_dropped: + dev_kfree_skb(skb); + + stats->rx_dropped++; + goto rx_exit; +} + + +EXPORT_SYMBOL(hostap_80211_rx); diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c new file mode 100644 index 00000000000..6358015f652 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -0,0 +1,524 @@ +void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr; + u16 fc; + + hdr = (struct ieee80211_hdr *) skb->data; + + printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", + name, skb->len, jiffies); + + if (skb->len < 2) + return; + + fc = le16_to_cpu(hdr->frame_ctl); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + printk("\n"); + return; + } + + printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), + le16_to_cpu(hdr->seq_ctl)); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR, + MAC2STR(hdr->addr1), MAC2STR(hdr->addr2), MAC2STR(hdr->addr3)); + if (skb->len >= 30) + printk(" A4=" MACSTR, MAC2STR(hdr->addr4)); + printk("\n"); +} + + +/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta) + * Convert Ethernet header into a suitable IEEE 802.11 header depending on + * device configuration. */ +int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int need_headroom, need_tailroom = 0; + struct ieee80211_hdr hdr; + u16 fc, ethertype = 0; + enum { + WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME + } use_wds = WDS_NO; + u8 *encaps_data; + int hdr_len, encaps_len, skip_header_bytes; + int to_assoc_ap = 0; + struct hostap_skb_tx_data *meta; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < ETH_HLEN) { + printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + kfree_skb(skb); + return 0; + } + + if (local->ddev != dev) { + use_wds = (local->iw_mode == IW_MODE_MASTER && + !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ? + WDS_OWN_FRAME : WDS_COMPLIANT_FRAME; + if (dev == local->stadev) { + to_assoc_ap = 1; + use_wds = WDS_NO; + } else if (dev == local->apdev) { + printk(KERN_DEBUG "%s: prism2_tx: trying to use " + "AP device with Ethernet net dev\n", dev->name); + kfree_skb(skb); + return 0; + } + } else { + if (local->iw_mode == IW_MODE_REPEAT) { + printk(KERN_DEBUG "%s: prism2_tx: trying to use " + "non-WDS link in Repeater mode\n", dev->name); + kfree_skb(skb); + return 0; + } else if (local->iw_mode == IW_MODE_INFRA && + (local->wds_type & HOSTAP_WDS_AP_CLIENT) && + memcmp(skb->data + ETH_ALEN, dev->dev_addr, + ETH_ALEN) != 0) { + /* AP client mode: send frames with foreign src addr + * using 4-addr WDS frames */ + use_wds = WDS_COMPLIANT_FRAME; + } + } + + /* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload + * ==> + * Prism2 TX frame with 802.11 header: + * txdesc (address order depending on used mode; includes dst_addr and + * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel; + * proto[2], payload {, possible addr4[6]} */ + + ethertype = (skb->data[12] << 8) | skb->data[13]; + + memset(&hdr, 0, sizeof(hdr)); + + /* Length of data after IEEE 802.11 header */ + encaps_data = NULL; + encaps_len = 0; + skip_header_bytes = ETH_HLEN; + if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { + encaps_data = bridge_tunnel_header; + encaps_len = sizeof(bridge_tunnel_header); + skip_header_bytes -= 2; + } else if (ethertype >= 0x600) { + encaps_data = rfc1042_header; + encaps_len = sizeof(rfc1042_header); + skip_header_bytes -= 2; + } + + fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; + hdr_len = IEEE80211_DATA_HDR3_LEN; + + if (use_wds != WDS_NO) { + /* Note! Prism2 station firmware has problems with sending real + * 802.11 frames with four addresses; until these problems can + * be fixed or worked around, 4-addr frames needed for WDS are + * using incompatible format: FromDS flag is not set and the + * fourth address is added after the frame payload; it is + * assumed, that the receiving station knows how to handle this + * frame format */ + + if (use_wds == WDS_COMPLIANT_FRAME) { + fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; + /* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA, + * Addr4 = SA */ + memcpy(&hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); + hdr_len += ETH_ALEN; + } else { + /* bogus 4-addr format to workaround Prism2 station + * f/w bug */ + fc |= IEEE80211_FCTL_TODS; + /* From DS: Addr1 = DA (used as RA), + * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA), + */ + + /* SA from skb->data + ETH_ALEN will be added after + * frame payload; use hdr.addr4 as a temporary buffer + */ + memcpy(&hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); + need_tailroom += ETH_ALEN; + } + + /* send broadcast and multicast frames to broadcast RA, if + * configured; otherwise, use unicast RA of the WDS link */ + if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) && + skb->data[0] & 0x01) + memset(&hdr.addr1, 0xff, ETH_ALEN); + else if (iface->type == HOSTAP_INTERFACE_WDS) + memcpy(&hdr.addr1, iface->u.wds.remote_addr, + ETH_ALEN); + else + memcpy(&hdr.addr1, local->bssid, ETH_ALEN); + memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); + memcpy(&hdr.addr3, skb->data, ETH_ALEN); + } else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) { + fc |= IEEE80211_FCTL_FROMDS; + /* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */ + memcpy(&hdr.addr1, skb->data, ETH_ALEN); + memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); + memcpy(&hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); + } else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) { + fc |= IEEE80211_FCTL_TODS; + /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ + memcpy(&hdr.addr1, to_assoc_ap ? + local->assoc_ap_addr : local->bssid, ETH_ALEN); + memcpy(&hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); + memcpy(&hdr.addr3, skb->data, ETH_ALEN); + } else if (local->iw_mode == IW_MODE_ADHOC) { + /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ + memcpy(&hdr.addr1, skb->data, ETH_ALEN); + memcpy(&hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); + memcpy(&hdr.addr3, local->bssid, ETH_ALEN); + } + + hdr.frame_ctl = cpu_to_le16(fc); + + skb_pull(skb, skip_header_bytes); + need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len; + if (skb_tailroom(skb) < need_tailroom) { + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) { + iface->stats.tx_dropped++; + return 0; + } + if (pskb_expand_head(skb, need_headroom, need_tailroom, + GFP_ATOMIC)) { + kfree_skb(skb); + iface->stats.tx_dropped++; + return 0; + } + } else if (skb_headroom(skb) < need_headroom) { + struct sk_buff *tmp = skb; + skb = skb_realloc_headroom(skb, need_headroom); + kfree_skb(tmp); + if (skb == NULL) { + iface->stats.tx_dropped++; + return 0; + } + } else { + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) { + iface->stats.tx_dropped++; + return 0; + } + } + + if (encaps_data) + memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); + memcpy(skb_push(skb, hdr_len), &hdr, hdr_len); + if (use_wds == WDS_OWN_FRAME) { + memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN); + } + + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + + skb->mac.raw = skb->data; + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + if (use_wds) + meta->flags |= HOSTAP_TX_FLAGS_WDS; + meta->ethertype = ethertype; + meta->iface = iface; + + /* Send IEEE 802.11 encapsulated frame using the master radio device */ + skb->dev = local->dev; + dev_queue_xmit(skb); + return 0; +} + + +/* hard_start_xmit function for hostapd wlan#ap interfaces */ +int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hostap_skb_tx_data *meta; + struct ieee80211_hdr *hdr; + u16 fc; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < 10) { + printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + kfree_skb(skb); + return 0; + } + + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = iface; + + if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && + WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_DATA) { + u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN + + sizeof(rfc1042_header)]; + meta->ethertype = (pos[0] << 8) | pos[1]; + } + } + + /* Send IEEE 802.11 encapsulated frame using the master radio device */ + skb->dev = local->dev; + dev_queue_xmit(skb); + return 0; +} + + +/* Called only from software IRQ */ +struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, + struct ieee80211_crypt_data *crypt) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + u16 fc; + int hdr_len, res; + + iface = netdev_priv(skb->dev); + local = iface->local; + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + kfree_skb(skb); + return NULL; + } + + if (local->tkip_countermeasures && + crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) { + hdr = (struct ieee80211_hdr *) skb->data; + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "TX packet to " MACSTR "\n", + local->dev->name, MAC2STR(hdr->addr1)); + } + kfree_skb(skb); + return NULL; + } + + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) + return NULL; + + if ((skb_headroom(skb) < crypt->ops->extra_prefix_len || + skb_tailroom(skb) < crypt->ops->extra_postfix_len) && + pskb_expand_head(skb, crypt->ops->extra_prefix_len, + crypt->ops->extra_postfix_len, GFP_ATOMIC)) { + kfree_skb(skb); + return NULL; + } + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + hdr_len = hostap_80211_get_hdrlen(fc); + + /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so + * call both MSDU and MPDU encryption functions from here. */ + atomic_inc(&crypt->refcnt); + res = 0; + if (crypt->ops->encrypt_msdu) + res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv); + if (res == 0 && crypt->ops->encrypt_mpdu) + res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + kfree_skb(skb); + return NULL; + } + + return skb; +} + + +/* hard_start_xmit function for master radio interface wifi#. + * AP processing (TX rate control, power save buffering, etc.). + * Use hardware TX function to send the frame. */ +int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 1; + u16 fc; + struct hostap_tx_data tx; + ap_tx_ret tx_ret; + struct hostap_skb_tx_data *meta; + int no_encrypt = 0; + struct ieee80211_hdr *hdr; + + iface = netdev_priv(dev); + local = iface->local; + + tx.skb = skb; + tx.sta_ptr = NULL; + + meta = (struct hostap_skb_tx_data *) skb->cb; + if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { + printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " + "expected 0x%08x)\n", + dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC); + ret = 0; + iface->stats.tx_dropped++; + goto fail; + } + + if (local->host_encrypt) { + /* Set crypt to default algorithm and key; will be replaced in + * AP code if STA has own alg/key */ + tx.crypt = local->crypt[local->tx_keyidx]; + tx.host_encrypt = 1; + } else { + tx.crypt = NULL; + tx.host_encrypt = 0; + } + + if (skb->len < 24) { + printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + ret = 0; + iface->stats.tx_dropped++; + goto fail; + } + + /* FIX (?): + * Wi-Fi 802.11b test plan suggests that AP should ignore power save + * bit in authentication and (re)association frames and assume tha + * STA remains awake for the response. */ + tx_ret = hostap_handle_sta_tx(local, &tx); + skb = tx.skb; + meta = (struct hostap_skb_tx_data *) skb->cb; + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + switch (tx_ret) { + case AP_TX_CONTINUE: + break; + case AP_TX_CONTINUE_NOT_AUTHORIZED: + if (local->ieee_802_1x && + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && + meta->ethertype != ETH_P_PAE && + !(meta->flags & HOSTAP_TX_FLAGS_WDS)) { + printk(KERN_DEBUG "%s: dropped frame to unauthorized " + "port (IEEE 802.1X): ethertype=0x%04x\n", + dev->name, meta->ethertype); + hostap_dump_tx_80211(dev->name, skb); + + ret = 0; /* drop packet */ + iface->stats.tx_dropped++; + goto fail; + } + break; + case AP_TX_DROP: + ret = 0; /* drop packet */ + iface->stats.tx_dropped++; + goto fail; + case AP_TX_RETRY: + goto fail; + case AP_TX_BUFFERED: + /* do not free skb here, it will be freed when the + * buffered frame is sent/timed out */ + ret = 0; + goto tx_exit; + } + + /* Request TX callback if protocol version is 2 in 802.11 header; + * this version 2 is a special case used between hostapd and kernel + * driver */ + if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) && + local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) { + meta->tx_cb_idx = local->ap->tx_callback_idx; + + /* remove special version from the frame header */ + fc &= ~IEEE80211_FCTL_VERS; + hdr->frame_ctl = cpu_to_le16(fc); + } + + if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_DATA) { + no_encrypt = 1; + tx.crypt = NULL; + } + + if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt && + !(fc & IEEE80211_FCTL_VERS)) { + no_encrypt = 1; + PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing " + "unencrypted EAPOL frame\n", dev->name); + tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */ + } + + if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu)) + tx.crypt = NULL; + else if ((tx.crypt || local->crypt[local->tx_keyidx]) && !no_encrypt) { + /* Add ISWEP flag both for firmware and host based encryption + */ + fc |= IEEE80211_FCTL_PROTECTED; + hdr->frame_ctl = cpu_to_le16(fc); + } else if (local->drop_unencrypted && + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && + meta->ethertype != ETH_P_PAE) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: dropped unencrypted TX data " + "frame (drop_unencrypted=1)\n", dev->name); + } + iface->stats.tx_dropped++; + ret = 0; + goto fail; + } + + if (tx.crypt) { + skb = hostap_tx_encrypt(skb, tx.crypt); + if (skb == NULL) { + printk(KERN_DEBUG "%s: TX - encryption failed\n", + dev->name); + ret = 0; + goto fail; + } + meta = (struct hostap_skb_tx_data *) skb->cb; + if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { + printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " + "expected 0x%08x) after hostap_tx_encrypt\n", + dev->name, meta->magic, + HOSTAP_SKB_TX_DATA_MAGIC); + ret = 0; + iface->stats.tx_dropped++; + goto fail; + } + } + + if (local->func->tx == NULL || local->func->tx(skb, dev)) { + ret = 0; + iface->stats.tx_dropped++; + } else { + ret = 0; + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + } + + fail: + if (!ret && skb) + dev_kfree_skb(skb); + tx_exit: + if (tx.sta_ptr) + hostap_handle_sta_release(tx.sta_ptr); + return ret; +} + + +EXPORT_SYMBOL(hostap_dump_tx_80211); +EXPORT_SYMBOL(hostap_tx_encrypt); +EXPORT_SYMBOL(hostap_master_start_xmit); diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c new file mode 100644 index 00000000000..930cef8367f --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -0,0 +1,3288 @@ +/* + * Intersil Prism2 driver with Host AP (software access point) support + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2005, Jouni Malinen <jkmaline@cc.hut.fi> + * + * This file is to be included into hostap.c when S/W AP functionality is + * compiled. + * + * AP: FIX: + * - if unicast Class 2 (assoc,reassoc,disassoc) frame received from + * unauthenticated STA, send deauth. frame (8802.11: 5.5) + * - if unicast Class 3 (data with to/from DS,deauth,pspoll) frame received + * from authenticated, but unassoc STA, send disassoc frame (8802.11: 5.5) + * - if unicast Class 3 received from unauthenticated STA, send deauth. frame + * (8802.11: 5.5) + */ + +static int other_ap_policy[MAX_PARM_DEVICES] = { AP_OTHER_AP_SKIP_ALL, + DEF_INTS }; +module_param_array(other_ap_policy, int, NULL, 0444); +MODULE_PARM_DESC(other_ap_policy, "Other AP beacon monitoring policy (0-3)"); + +static int ap_max_inactivity[MAX_PARM_DEVICES] = { AP_MAX_INACTIVITY_SEC, + DEF_INTS }; +module_param_array(ap_max_inactivity, int, NULL, 0444); +MODULE_PARM_DESC(ap_max_inactivity, "AP timeout (in seconds) for station " + "inactivity"); + +static int ap_bridge_packets[MAX_PARM_DEVICES] = { 1, DEF_INTS }; +module_param_array(ap_bridge_packets, int, NULL, 0444); +MODULE_PARM_DESC(ap_bridge_packets, "Bridge packets directly between " + "stations"); + +static int autom_ap_wds[MAX_PARM_DEVICES] = { 0, DEF_INTS }; +module_param_array(autom_ap_wds, int, NULL, 0444); +MODULE_PARM_DESC(autom_ap_wds, "Add WDS connections to other APs " + "automatically"); + + +static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta); +static void hostap_event_expired_sta(struct net_device *dev, + struct sta_info *sta); +static void handle_add_proc_queue(void *data); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static void handle_wds_oper_queue(void *data); +static void prism2_send_mgmt(struct net_device *dev, + u16 type_subtype, char *body, + int body_len, u8 *addr, u16 tx_cb_idx); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int ap_debug_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + struct ap_data *ap = (struct ap_data *) data; + + if (off != 0) { + *eof = 1; + return 0; + } + + p += sprintf(p, "BridgedUnicastFrames=%u\n", ap->bridged_unicast); + p += sprintf(p, "BridgedMulticastFrames=%u\n", ap->bridged_multicast); + p += sprintf(p, "max_inactivity=%u\n", ap->max_inactivity / HZ); + p += sprintf(p, "bridge_packets=%u\n", ap->bridge_packets); + p += sprintf(p, "nullfunc_ack=%u\n", ap->nullfunc_ack); + p += sprintf(p, "autom_ap_wds=%u\n", ap->autom_ap_wds); + p += sprintf(p, "auth_algs=%u\n", ap->local->auth_algs); + p += sprintf(p, "tx_drop_nonassoc=%u\n", ap->tx_drop_nonassoc); + + return (p - page); +} +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +static void ap_sta_hash_add(struct ap_data *ap, struct sta_info *sta) +{ + sta->hnext = ap->sta_hash[STA_HASH(sta->addr)]; + ap->sta_hash[STA_HASH(sta->addr)] = sta; +} + +static void ap_sta_hash_del(struct ap_data *ap, struct sta_info *sta) +{ + struct sta_info *s; + + s = ap->sta_hash[STA_HASH(sta->addr)]; + if (s == NULL) return; + if (memcmp(s->addr, sta->addr, ETH_ALEN) == 0) { + ap->sta_hash[STA_HASH(sta->addr)] = s->hnext; + return; + } + + while (s->hnext != NULL && memcmp(s->hnext->addr, sta->addr, ETH_ALEN) + != 0) + s = s->hnext; + if (s->hnext != NULL) + s->hnext = s->hnext->hnext; + else + printk("AP: could not remove STA " MACSTR " from hash table\n", + MAC2STR(sta->addr)); +} + +static void ap_free_sta(struct ap_data *ap, struct sta_info *sta) +{ + if (sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + + if (ap->proc != NULL) { + char name[20]; + sprintf(name, MACSTR, MAC2STR(sta->addr)); + remove_proc_entry(name, ap->proc); + } + + if (sta->crypt) { + sta->crypt->ops->deinit(sta->crypt->priv); + kfree(sta->crypt); + sta->crypt = NULL; + } + + skb_queue_purge(&sta->tx_buf); + + ap->num_sta--; +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->aid > 0) + ap->sta_aid[sta->aid - 1] = NULL; + + if (!sta->ap && sta->u.sta.challenge) + kfree(sta->u.sta.challenge); + del_timer(&sta->timer); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + kfree(sta); +} + + +static void hostap_set_tim(local_info_t *local, int aid, int set) +{ + if (local->func->set_tim) + local->func->set_tim(local->dev, aid, set); +} + + +static void hostap_event_new_sta(struct net_device *dev, struct sta_info *sta) +{ + union iwreq_data wrqu; + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVREGISTERED, &wrqu, NULL); +} + + +static void hostap_event_expired_sta(struct net_device *dev, + struct sta_info *sta) +{ + union iwreq_data wrqu; + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVEXPIRED, &wrqu, NULL); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void ap_handle_timer(unsigned long data) +{ + struct sta_info *sta = (struct sta_info *) data; + local_info_t *local; + struct ap_data *ap; + unsigned long next_time = 0; + int was_assoc; + + if (sta == NULL || sta->local == NULL || sta->local->ap == NULL) { + PDEBUG(DEBUG_AP, "ap_handle_timer() called with NULL data\n"); + return; + } + + local = sta->local; + ap = local->ap; + was_assoc = sta->flags & WLAN_STA_ASSOC; + + if (atomic_read(&sta->users) != 0) + next_time = jiffies + HZ; + else if ((sta->flags & WLAN_STA_PERM) && !(sta->flags & WLAN_STA_AUTH)) + next_time = jiffies + ap->max_inactivity; + + if (time_before(jiffies, sta->last_rx + ap->max_inactivity)) { + /* station activity detected; reset timeout state */ + sta->timeout_next = STA_NULLFUNC; + next_time = sta->last_rx + ap->max_inactivity; + } else if (sta->timeout_next == STA_DISASSOC && + !(sta->flags & WLAN_STA_PENDING_POLL)) { + /* STA ACKed data nullfunc frame poll */ + sta->timeout_next = STA_NULLFUNC; + next_time = jiffies + ap->max_inactivity; + } + + if (next_time) { + sta->timer.expires = next_time; + add_timer(&sta->timer); + return; + } + + if (sta->ap) + sta->timeout_next = STA_DEAUTH; + + if (sta->timeout_next == STA_DEAUTH && !(sta->flags & WLAN_STA_PERM)) { + spin_lock(&ap->sta_table_lock); + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + spin_unlock(&ap->sta_table_lock); + sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); + } else if (sta->timeout_next == STA_DISASSOC) + sta->flags &= ~WLAN_STA_ASSOC; + + if (was_assoc && !(sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + + if (sta->timeout_next == STA_DEAUTH && sta->aid > 0 && + !skb_queue_empty(&sta->tx_buf)) { + hostap_set_tim(local, sta->aid, 0); + sta->flags &= ~WLAN_STA_TIM; + } + + if (sta->ap) { + if (ap->autom_ap_wds) { + PDEBUG(DEBUG_AP, "%s: removing automatic WDS " + "connection to AP " MACSTR "\n", + local->dev->name, MAC2STR(sta->addr)); + hostap_wds_link_oper(local, sta->addr, WDS_DEL); + } + } else if (sta->timeout_next == STA_NULLFUNC) { + /* send data frame to poll STA and check whether this frame + * is ACKed */ + /* FIX: IEEE80211_STYPE_NULLFUNC would be more appropriate, but + * it is apparently not retried so TX Exc events are not + * received for it */ + sta->flags |= WLAN_STA_PENDING_POLL; + prism2_send_mgmt(local->dev, IEEE80211_FTYPE_DATA | + IEEE80211_STYPE_DATA, NULL, 0, + sta->addr, ap->tx_callback_poll); + } else { + int deauth = sta->timeout_next == STA_DEAUTH; + u16 resp; + PDEBUG(DEBUG_AP, "%s: sending %s info to STA " MACSTR + "(last=%lu, jiffies=%lu)\n", + local->dev->name, + deauth ? "deauthentication" : "disassociation", + MAC2STR(sta->addr), sta->last_rx, jiffies); + + resp = cpu_to_le16(deauth ? WLAN_REASON_PREV_AUTH_NOT_VALID : + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + prism2_send_mgmt(local->dev, IEEE80211_FTYPE_MGMT | + (deauth ? IEEE80211_STYPE_DEAUTH : + IEEE80211_STYPE_DISASSOC), + (char *) &resp, 2, sta->addr, 0); + } + + if (sta->timeout_next == STA_DEAUTH) { + if (sta->flags & WLAN_STA_PERM) { + PDEBUG(DEBUG_AP, "%s: STA " MACSTR " would have been " + "removed, but it has 'perm' flag\n", + local->dev->name, MAC2STR(sta->addr)); + } else + ap_free_sta(ap, sta); + return; + } + + if (sta->timeout_next == STA_NULLFUNC) { + sta->timeout_next = STA_DISASSOC; + sta->timer.expires = jiffies + AP_DISASSOC_DELAY; + } else { + sta->timeout_next = STA_DEAUTH; + sta->timer.expires = jiffies + AP_DEAUTH_DELAY; + } + + add_timer(&sta->timer); +} + + +void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, + int resend) +{ + u8 addr[ETH_ALEN]; + u16 resp; + int i; + + PDEBUG(DEBUG_AP, "%s: Deauthenticate all stations\n", dev->name); + memset(addr, 0xff, ETH_ALEN); + + resp = __constant_cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); + + /* deauth message sent; try to resend it few times; the message is + * broadcast, so it may be delayed until next DTIM; there is not much + * else we can do at this point since the driver is going to be shut + * down */ + for (i = 0; i < 5; i++) { + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_DEAUTH, + (char *) &resp, 2, addr, 0); + + if (!resend || ap->num_sta <= 0) + return; + + mdelay(50); + } +} + + +static int ap_control_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + struct ap_data *ap = (struct ap_data *) data; + char *policy_txt; + struct list_head *ptr; + struct mac_entry *entry; + + if (off != 0) { + *eof = 1; + return 0; + } + + switch (ap->mac_restrictions.policy) { + case MAC_POLICY_OPEN: + policy_txt = "open"; + break; + case MAC_POLICY_ALLOW: + policy_txt = "allow"; + break; + case MAC_POLICY_DENY: + policy_txt = "deny"; + break; + default: + policy_txt = "unknown"; + break; + }; + p += sprintf(p, "MAC policy: %s\n", policy_txt); + p += sprintf(p, "MAC entries: %u\n", ap->mac_restrictions.entries); + p += sprintf(p, "MAC list:\n"); + spin_lock_bh(&ap->mac_restrictions.lock); + for (ptr = ap->mac_restrictions.mac_list.next; + ptr != &ap->mac_restrictions.mac_list; ptr = ptr->next) { + if (p - page > PAGE_SIZE - 80) { + p += sprintf(p, "All entries did not fit one page.\n"); + break; + } + + entry = list_entry(ptr, struct mac_entry, list); + p += sprintf(p, MACSTR "\n", MAC2STR(entry->addr)); + } + spin_unlock_bh(&ap->mac_restrictions.lock); + + return (p - page); +} + + +static int ap_control_add_mac(struct mac_restrictions *mac_restrictions, + u8 *mac) +{ + struct mac_entry *entry; + + entry = kmalloc(sizeof(struct mac_entry), GFP_KERNEL); + if (entry == NULL) + return -1; + + memcpy(entry->addr, mac, ETH_ALEN); + + spin_lock_bh(&mac_restrictions->lock); + list_add_tail(&entry->list, &mac_restrictions->mac_list); + mac_restrictions->entries++; + spin_unlock_bh(&mac_restrictions->lock); + + return 0; +} + + +static int ap_control_del_mac(struct mac_restrictions *mac_restrictions, + u8 *mac) +{ + struct list_head *ptr; + struct mac_entry *entry; + + spin_lock_bh(&mac_restrictions->lock); + for (ptr = mac_restrictions->mac_list.next; + ptr != &mac_restrictions->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, list); + + if (memcmp(entry->addr, mac, ETH_ALEN) == 0) { + list_del(ptr); + kfree(entry); + mac_restrictions->entries--; + spin_unlock_bh(&mac_restrictions->lock); + return 0; + } + } + spin_unlock_bh(&mac_restrictions->lock); + return -1; +} + + +static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions, + u8 *mac) +{ + struct list_head *ptr; + struct mac_entry *entry; + int found = 0; + + if (mac_restrictions->policy == MAC_POLICY_OPEN) + return 0; + + spin_lock_bh(&mac_restrictions->lock); + for (ptr = mac_restrictions->mac_list.next; + ptr != &mac_restrictions->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, list); + + if (memcmp(entry->addr, mac, ETH_ALEN) == 0) { + found = 1; + break; + } + } + spin_unlock_bh(&mac_restrictions->lock); + + if (mac_restrictions->policy == MAC_POLICY_ALLOW) + return !found; + else + return found; +} + + +static void ap_control_flush_macs(struct mac_restrictions *mac_restrictions) +{ + struct list_head *ptr, *n; + struct mac_entry *entry; + + if (mac_restrictions->entries == 0) + return; + + spin_lock_bh(&mac_restrictions->lock); + for (ptr = mac_restrictions->mac_list.next, n = ptr->next; + ptr != &mac_restrictions->mac_list; + ptr = n, n = ptr->next) { + entry = list_entry(ptr, struct mac_entry, list); + list_del(ptr); + kfree(entry); + } + mac_restrictions->entries = 0; + spin_unlock_bh(&mac_restrictions->lock); +} + + +static int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, + u8 *mac) +{ + struct sta_info *sta; + u16 resp; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, mac); + if (sta) { + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -EINVAL; + + resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH, + (char *) &resp, 2, sta->addr, 0); + + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(dev, sta); + + ap_free_sta(ap, sta); + + return 0; +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +static void ap_control_kickall(struct ap_data *ap) +{ + struct list_head *ptr, *n; + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + for (ptr = ap->sta_list.next, n = ptr->next; ptr != &ap->sta_list; + ptr = n, n = ptr->next) { + sta = list_entry(ptr, struct sta_info, list); + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + } + spin_unlock_bh(&ap->sta_table_lock); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +#define PROC_LIMIT (PAGE_SIZE - 80) + +static int prism2_ap_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + struct ap_data *ap = (struct ap_data *) data; + struct list_head *ptr; + int i; + + if (off > PROC_LIMIT) { + *eof = 1; + return 0; + } + + p += sprintf(p, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n"); + spin_lock_bh(&ap->sta_table_lock); + for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + + if (!sta->ap) + continue; + + p += sprintf(p, MACSTR " %d %d %d %d '", MAC2STR(sta->addr), + sta->u.ap.channel, sta->last_rx_signal, + sta->last_rx_silence, sta->last_rx_rate); + for (i = 0; i < sta->u.ap.ssid_len; i++) + p += sprintf(p, ((sta->u.ap.ssid[i] >= 32 && + sta->u.ap.ssid[i] < 127) ? + "%c" : "<%02x>"), + sta->u.ap.ssid[i]); + p += sprintf(p, "'"); + if (sta->capability & WLAN_CAPABILITY_ESS) + p += sprintf(p, " [ESS]"); + if (sta->capability & WLAN_CAPABILITY_IBSS) + p += sprintf(p, " [IBSS]"); + if (sta->capability & WLAN_CAPABILITY_PRIVACY) + p += sprintf(p, " [WEP]"); + p += sprintf(p, "\n"); + + if ((p - page) > PROC_LIMIT) { + printk(KERN_DEBUG "hostap: ap proc did not fit\n"); + break; + } + } + spin_unlock_bh(&ap->sta_table_lock); + + if ((p - page) <= off) { + *eof = 1; + return 0; + } + + *start = page + off; + + return (p - page - off); +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver) +{ + if (!ap) + return; + + if (sta_fw_ver == PRISM2_FW_VER(0,8,0)) { + PDEBUG(DEBUG_AP, "Using data::nullfunc ACK workaround - " + "firmware upgrade recommended\n"); + ap->nullfunc_ack = 1; + } else + ap->nullfunc_ack = 0; + + if (sta_fw_ver == PRISM2_FW_VER(1,4,2)) { + printk(KERN_WARNING "%s: Warning: secondary station firmware " + "version 1.4.2 does not seem to work in Host AP mode\n", + ap->local->dev->name); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + u16 fc; + struct ieee80211_hdr *hdr; + + if (!ap->local->hostapd || !ap->local->apdev) { + dev_kfree_skb(skb); + return; + } + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + + /* Pass the TX callback frame to the hostapd; use 802.11 header version + * 1 to indicate failure (no ACK) and 2 success (frame ACKed) */ + + fc &= ~IEEE80211_FCTL_VERS; + fc |= ok ? BIT(1) : BIT(0); + hdr->frame_ctl = cpu_to_le16(fc); + + skb->dev = ap->local->apdev; + skb_pull(skb, hostap_80211_get_hdrlen(fc)); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = __constant_htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct net_device *dev = ap->local->dev; + struct ieee80211_hdr *hdr; + u16 fc, *pos, auth_alg, auth_transaction, status; + struct sta_info *sta = NULL; + char *txt = NULL; + + if (ap->local->hostapd) { + dev_kfree_skb(skb); + return; + } + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || + WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_AUTH || + skb->len < IEEE80211_MGMT_HDR_LEN + 6) { + printk(KERN_DEBUG "%s: hostap_ap_tx_cb_auth received invalid " + "frame\n", dev->name); + dev_kfree_skb(skb); + return; + } + + pos = (u16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + auth_alg = le16_to_cpu(*pos++); + auth_transaction = le16_to_cpu(*pos++); + status = le16_to_cpu(*pos++); + + if (!ok) { + txt = "frame was not ACKed"; + goto done; + } + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&ap->sta_table_lock); + + if (!sta) { + txt = "STA not found"; + goto done; + } + + if (status == WLAN_STATUS_SUCCESS && + ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 2) || + (auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 4))) { + txt = "STA authenticated"; + sta->flags |= WLAN_STA_AUTH; + sta->last_auth = jiffies; + } else if (status != WLAN_STATUS_SUCCESS) + txt = "authentication failed"; + + done: + if (sta) + atomic_dec(&sta->users); + if (txt) { + PDEBUG(DEBUG_AP, "%s: " MACSTR " auth_cb - alg=%d trans#=%d " + "status=%d - %s\n", + dev->name, MAC2STR(hdr->addr1), auth_alg, + auth_transaction, status, txt); + } + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct net_device *dev = ap->local->dev; + struct ieee80211_hdr *hdr; + u16 fc, *pos, status; + struct sta_info *sta = NULL; + char *txt = NULL; + + if (ap->local->hostapd) { + dev_kfree_skb(skb); + return; + } + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || + (WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_ASSOC_RESP && + WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_REASSOC_RESP) || + skb->len < IEEE80211_MGMT_HDR_LEN + 4) { + printk(KERN_DEBUG "%s: hostap_ap_tx_cb_assoc received invalid " + "frame\n", dev->name); + dev_kfree_skb(skb); + return; + } + + if (!ok) { + txt = "frame was not ACKed"; + goto done; + } + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&ap->sta_table_lock); + + if (!sta) { + txt = "STA not found"; + goto done; + } + + pos = (u16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + pos++; + status = le16_to_cpu(*pos++); + if (status == WLAN_STATUS_SUCCESS) { + if (!(sta->flags & WLAN_STA_ASSOC)) + hostap_event_new_sta(dev, sta); + txt = "STA associated"; + sta->flags |= WLAN_STA_ASSOC; + sta->last_assoc = jiffies; + } else + txt = "association failed"; + + done: + if (sta) + atomic_dec(&sta->users); + if (txt) { + PDEBUG(DEBUG_AP, "%s: " MACSTR " assoc_cb - %s\n", + dev->name, MAC2STR(hdr->addr1), txt); + } + dev_kfree_skb(skb); +} + +/* Called only as a tasklet (software IRQ); TX callback for poll frames used + * in verifying whether the STA is still present. */ +static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct ieee80211_hdr *hdr; + struct sta_info *sta; + + if (skb->len < 24) + goto fail; + hdr = (struct ieee80211_hdr *) skb->data; + if (ok) { + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + sta->flags &= ~WLAN_STA_PENDING_POLL; + spin_unlock(&ap->sta_table_lock); + } else { + PDEBUG(DEBUG_AP, "%s: STA " MACSTR " did not ACK activity " + "poll frame\n", ap->local->dev->name, + MAC2STR(hdr->addr1)); + } + + fail: + dev_kfree_skb(skb); +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +void hostap_init_data(local_info_t *local) +{ + struct ap_data *ap = local->ap; + + if (ap == NULL) { + printk(KERN_WARNING "hostap_init_data: ap == NULL\n"); + return; + } + memset(ap, 0, sizeof(struct ap_data)); + ap->local = local; + + ap->ap_policy = GET_INT_PARM(other_ap_policy, local->card_idx); + ap->bridge_packets = GET_INT_PARM(ap_bridge_packets, local->card_idx); + ap->max_inactivity = + GET_INT_PARM(ap_max_inactivity, local->card_idx) * HZ; + ap->autom_ap_wds = GET_INT_PARM(autom_ap_wds, local->card_idx); + + spin_lock_init(&ap->sta_table_lock); + INIT_LIST_HEAD(&ap->sta_list); + + /* Initialize task queue structure for AP management */ + INIT_WORK(&local->ap->add_sta_proc_queue, handle_add_proc_queue, ap); + + ap->tx_callback_idx = + hostap_tx_callback_register(local, hostap_ap_tx_cb, ap); + if (ap->tx_callback_idx == 0) + printk(KERN_WARNING "%s: failed to register TX callback for " + "AP\n", local->dev->name); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + INIT_WORK(&local->ap->wds_oper_queue, handle_wds_oper_queue, local); + + ap->tx_callback_auth = + hostap_tx_callback_register(local, hostap_ap_tx_cb_auth, ap); + ap->tx_callback_assoc = + hostap_tx_callback_register(local, hostap_ap_tx_cb_assoc, ap); + ap->tx_callback_poll = + hostap_tx_callback_register(local, hostap_ap_tx_cb_poll, ap); + if (ap->tx_callback_auth == 0 || ap->tx_callback_assoc == 0 || + ap->tx_callback_poll == 0) + printk(KERN_WARNING "%s: failed to register TX callback for " + "AP\n", local->dev->name); + + spin_lock_init(&ap->mac_restrictions.lock); + INIT_LIST_HEAD(&ap->mac_restrictions.mac_list); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + ap->initialized = 1; +} + + +void hostap_init_ap_proc(local_info_t *local) +{ + struct ap_data *ap = local->ap; + + ap->proc = local->proc; + if (ap->proc == NULL) + return; + +#ifndef PRISM2_NO_PROCFS_DEBUG + create_proc_read_entry("ap_debug", 0, ap->proc, + ap_debug_proc_read, ap); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + create_proc_read_entry("ap_control", 0, ap->proc, + ap_control_proc_read, ap); + create_proc_read_entry("ap", 0, ap->proc, + prism2_ap_proc_read, ap); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +} + + +void hostap_free_data(struct ap_data *ap) +{ + struct list_head *n, *ptr; + + if (ap == NULL || !ap->initialized) { + printk(KERN_DEBUG "hostap_free_data: ap has not yet been " + "initialized - skip resource freeing\n"); + return; + } + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (ap->crypt) + ap->crypt->deinit(ap->crypt_priv); + ap->crypt = ap->crypt_priv = NULL; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + list_for_each_safe(ptr, n, &ap->sta_list) { + struct sta_info *sta = list_entry(ptr, struct sta_info, list); + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + } + +#ifndef PRISM2_NO_PROCFS_DEBUG + if (ap->proc != NULL) { + remove_proc_entry("ap_debug", ap->proc); + } +#endif /* PRISM2_NO_PROCFS_DEBUG */ + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (ap->proc != NULL) { + remove_proc_entry("ap", ap->proc); + remove_proc_entry("ap_control", ap->proc); + } + ap_control_flush_macs(&ap->mac_restrictions); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + ap->initialized = 0; +} + + +/* caller should have mutex for AP STA list handling */ +static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta) +{ + struct sta_info *s; + + s = ap->sta_hash[STA_HASH(sta)]; + while (s != NULL && memcmp(s->addr, sta, ETH_ALEN) != 0) + s = s->hnext; + return s; +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +/* Called from timer handler and from scheduled AP queue handlers */ +static void prism2_send_mgmt(struct net_device *dev, + u16 type_subtype, char *body, + int body_len, u8 *addr, u16 tx_cb_idx) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + u16 fc; + struct sk_buff *skb; + struct hostap_skb_tx_data *meta; + int hdrlen; + + iface = netdev_priv(dev); + local = iface->local; + dev = local->dev; /* always use master radio device */ + iface = netdev_priv(dev); + + if (!(dev->flags & IFF_UP)) { + PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt - device is not UP - " + "cannot send frame\n", dev->name); + return; + } + + skb = dev_alloc_skb(sizeof(*hdr) + body_len); + if (skb == NULL) { + PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt failed to allocate " + "skb\n", dev->name); + return; + } + + fc = type_subtype; + hdrlen = hostap_80211_get_hdrlen(fc); + hdr = (struct ieee80211_hdr *) skb_put(skb, hdrlen); + if (body) + memcpy(skb_put(skb, body_len), body, body_len); + + memset(hdr, 0, hdrlen); + + /* FIX: ctrl::ack sending used special HFA384X_TX_CTRL_802_11 + * tx_control instead of using local->tx_control */ + + + memcpy(hdr->addr1, addr, ETH_ALEN); /* DA / RA */ + if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) { + fc |= IEEE80211_FCTL_FROMDS; + memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* BSSID */ + memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* SA */ + } else if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_CTL) { + /* control:ACK does not have addr2 or addr3 */ + memset(hdr->addr2, 0, ETH_ALEN); + memset(hdr->addr3, 0, ETH_ALEN); + } else { + memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* SA */ + memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* BSSID */ + } + + hdr->frame_ctl = cpu_to_le16(fc); + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = iface; + meta->tx_cb_idx = tx_cb_idx; + + skb->dev = dev; + skb->mac.raw = skb->nh.raw = skb->data; + dev_queue_xmit(skb); +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +static int prism2_sta_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + struct sta_info *sta = (struct sta_info *) data; + int i; + + /* FIX: possible race condition.. the STA data could have just expired, + * but proc entry was still here so that the read could have started; + * some locking should be done here.. */ + + if (off != 0) { + *eof = 1; + return 0; + } + + p += sprintf(p, "%s=" MACSTR "\nusers=%d\naid=%d\n" + "flags=0x%04x%s%s%s%s%s%s%s\n" + "capability=0x%02x\nlisten_interval=%d\nsupported_rates=", + sta->ap ? "AP" : "STA", + MAC2STR(sta->addr), atomic_read(&sta->users), sta->aid, + sta->flags, + sta->flags & WLAN_STA_AUTH ? " AUTH" : "", + sta->flags & WLAN_STA_ASSOC ? " ASSOC" : "", + sta->flags & WLAN_STA_PS ? " PS" : "", + sta->flags & WLAN_STA_TIM ? " TIM" : "", + sta->flags & WLAN_STA_PERM ? " PERM" : "", + sta->flags & WLAN_STA_AUTHORIZED ? " AUTHORIZED" : "", + sta->flags & WLAN_STA_PENDING_POLL ? " POLL" : "", + sta->capability, sta->listen_interval); + /* supported_rates: 500 kbit/s units with msb ignored */ + for (i = 0; i < sizeof(sta->supported_rates); i++) + if (sta->supported_rates[i] != 0) + p += sprintf(p, "%d%sMbps ", + (sta->supported_rates[i] & 0x7f) / 2, + sta->supported_rates[i] & 1 ? ".5" : ""); + p += sprintf(p, "\njiffies=%lu\nlast_auth=%lu\nlast_assoc=%lu\n" + "last_rx=%lu\nlast_tx=%lu\nrx_packets=%lu\n" + "tx_packets=%lu\n" + "rx_bytes=%lu\ntx_bytes=%lu\nbuffer_count=%d\n" + "last_rx: silence=%d dBm signal=%d dBm rate=%d%s Mbps\n" + "tx_rate=%d\ntx[1M]=%d\ntx[2M]=%d\ntx[5.5M]=%d\n" + "tx[11M]=%d\n" + "rx[1M]=%d\nrx[2M]=%d\nrx[5.5M]=%d\nrx[11M]=%d\n", + jiffies, sta->last_auth, sta->last_assoc, sta->last_rx, + sta->last_tx, + sta->rx_packets, sta->tx_packets, sta->rx_bytes, + sta->tx_bytes, skb_queue_len(&sta->tx_buf), + sta->last_rx_silence, + sta->last_rx_signal, sta->last_rx_rate / 10, + sta->last_rx_rate % 10 ? ".5" : "", + sta->tx_rate, sta->tx_count[0], sta->tx_count[1], + sta->tx_count[2], sta->tx_count[3], sta->rx_count[0], + sta->rx_count[1], sta->rx_count[2], sta->rx_count[3]); + if (sta->crypt && sta->crypt->ops && sta->crypt->ops->print_stats) + p = sta->crypt->ops->print_stats(p, sta->crypt->priv); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->ap) { + if (sta->u.ap.channel >= 0) + p += sprintf(p, "channel=%d\n", sta->u.ap.channel); + p += sprintf(p, "ssid="); + for (i = 0; i < sta->u.ap.ssid_len; i++) + p += sprintf(p, ((sta->u.ap.ssid[i] >= 32 && + sta->u.ap.ssid[i] < 127) ? + "%c" : "<%02x>"), + sta->u.ap.ssid[i]); + p += sprintf(p, "\n"); + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + return (p - page); +} + + +static void handle_add_proc_queue(void *data) +{ + struct ap_data *ap = (struct ap_data *) data; + struct sta_info *sta; + char name[20]; + struct add_sta_proc_data *entry, *prev; + + entry = ap->add_sta_proc_entries; + ap->add_sta_proc_entries = NULL; + + while (entry) { + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, entry->addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (sta) { + sprintf(name, MACSTR, MAC2STR(sta->addr)); + sta->proc = create_proc_read_entry( + name, 0, ap->proc, + prism2_sta_proc_read, sta); + + atomic_dec(&sta->users); + } + + prev = entry; + entry = entry->next; + kfree(prev); + } +} + + +static struct sta_info * ap_add_sta(struct ap_data *ap, u8 *addr) +{ + struct sta_info *sta; + + sta = (struct sta_info *) + kmalloc(sizeof(struct sta_info), GFP_ATOMIC); + if (sta == NULL) { + PDEBUG(DEBUG_AP, "AP: kmalloc failed\n"); + return NULL; + } + + /* initialize STA info data */ + memset(sta, 0, sizeof(struct sta_info)); + sta->local = ap->local; + skb_queue_head_init(&sta->tx_buf); + memcpy(sta->addr, addr, ETH_ALEN); + + atomic_inc(&sta->users); + spin_lock_bh(&ap->sta_table_lock); + list_add(&sta->list, &ap->sta_list); + ap->num_sta++; + ap_sta_hash_add(ap, sta); + spin_unlock_bh(&ap->sta_table_lock); + + if (ap->proc) { + struct add_sta_proc_data *entry; + /* schedule a non-interrupt context process to add a procfs + * entry for the STA since procfs code use GFP_KERNEL */ + entry = kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry) { + memcpy(entry->addr, sta->addr, ETH_ALEN); + entry->next = ap->add_sta_proc_entries; + ap->add_sta_proc_entries = entry; + schedule_work(&ap->add_sta_proc_queue); + } else + printk(KERN_DEBUG "Failed to add STA proc data\n"); + } + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + init_timer(&sta->timer); + sta->timer.expires = jiffies + ap->max_inactivity; + sta->timer.data = (unsigned long) sta; + sta->timer.function = ap_handle_timer; + if (!ap->local->hostapd) + add_timer(&sta->timer); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + return sta; +} + + +static int ap_tx_rate_ok(int rateidx, struct sta_info *sta, + local_info_t *local) +{ + if (rateidx > sta->tx_max_rate || + !(sta->tx_supp_rates & (1 << rateidx))) + return 0; + + if (local->tx_rate_control != 0 && + !(local->tx_rate_control & (1 << rateidx))) + return 0; + + return 1; +} + + +static void prism2_check_tx_rates(struct sta_info *sta) +{ + int i; + + sta->tx_supp_rates = 0; + for (i = 0; i < sizeof(sta->supported_rates); i++) { + if ((sta->supported_rates[i] & 0x7f) == 2) + sta->tx_supp_rates |= WLAN_RATE_1M; + if ((sta->supported_rates[i] & 0x7f) == 4) + sta->tx_supp_rates |= WLAN_RATE_2M; + if ((sta->supported_rates[i] & 0x7f) == 11) + sta->tx_supp_rates |= WLAN_RATE_5M5; + if ((sta->supported_rates[i] & 0x7f) == 22) + sta->tx_supp_rates |= WLAN_RATE_11M; + } + sta->tx_max_rate = sta->tx_rate = sta->tx_rate_idx = 0; + if (sta->tx_supp_rates & WLAN_RATE_1M) { + sta->tx_max_rate = 0; + if (ap_tx_rate_ok(0, sta, sta->local)) { + sta->tx_rate = 10; + sta->tx_rate_idx = 0; + } + } + if (sta->tx_supp_rates & WLAN_RATE_2M) { + sta->tx_max_rate = 1; + if (ap_tx_rate_ok(1, sta, sta->local)) { + sta->tx_rate = 20; + sta->tx_rate_idx = 1; + } + } + if (sta->tx_supp_rates & WLAN_RATE_5M5) { + sta->tx_max_rate = 2; + if (ap_tx_rate_ok(2, sta, sta->local)) { + sta->tx_rate = 55; + sta->tx_rate_idx = 2; + } + } + if (sta->tx_supp_rates & WLAN_RATE_11M) { + sta->tx_max_rate = 3; + if (ap_tx_rate_ok(3, sta, sta->local)) { + sta->tx_rate = 110; + sta->tx_rate_idx = 3; + } + } +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void ap_crypt_init(struct ap_data *ap) +{ + ap->crypt = ieee80211_get_crypto_ops("WEP"); + + if (ap->crypt) { + if (ap->crypt->init) { + ap->crypt_priv = ap->crypt->init(0); + if (ap->crypt_priv == NULL) + ap->crypt = NULL; + else { + u8 key[WEP_KEY_LEN]; + get_random_bytes(key, WEP_KEY_LEN); + ap->crypt->set_key(key, WEP_KEY_LEN, NULL, + ap->crypt_priv); + } + } + } + + if (ap->crypt == NULL) { + printk(KERN_WARNING "AP could not initialize WEP: load module " + "ieee80211_crypt_wep.ko\n"); + } +} + + +/* Generate challenge data for shared key authentication. IEEE 802.11 specifies + * that WEP algorithm is used for generating challange. This should be unique, + * but otherwise there is not really need for randomness etc. Initialize WEP + * with pseudo random key and then use increasing IV to get unique challenge + * streams. + * + * Called only as a scheduled task for pending AP frames. + */ +static char * ap_auth_make_challenge(struct ap_data *ap) +{ + char *tmpbuf; + struct sk_buff *skb; + + if (ap->crypt == NULL) { + ap_crypt_init(ap); + if (ap->crypt == NULL) + return NULL; + } + + tmpbuf = (char *) kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC); + if (tmpbuf == NULL) { + PDEBUG(DEBUG_AP, "AP: kmalloc failed for challenge\n"); + return NULL; + } + + skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN + + ap->crypt->extra_prefix_len + + ap->crypt->extra_postfix_len); + if (skb == NULL) { + kfree(tmpbuf); + return NULL; + } + + skb_reserve(skb, ap->crypt->extra_prefix_len); + memset(skb_put(skb, WLAN_AUTH_CHALLENGE_LEN), 0, + WLAN_AUTH_CHALLENGE_LEN); + if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) { + dev_kfree_skb(skb); + kfree(tmpbuf); + return NULL; + } + + memcpy(tmpbuf, skb->data + ap->crypt->extra_prefix_len, + WLAN_AUTH_CHALLENGE_LEN); + dev_kfree_skb(skb); + + return tmpbuf; +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_authen(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + size_t hdrlen; + struct ap_data *ap = local->ap; + char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL; + int len, olen; + u16 auth_alg, auth_transaction, status_code, *pos; + u16 resp = WLAN_STATUS_SUCCESS, fc; + struct sta_info *sta = NULL; + struct ieee80211_crypt_data *crypt; + char *txt = ""; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + fc = le16_to_cpu(hdr->frame_ctl); + hdrlen = hostap_80211_get_hdrlen(fc); + + if (len < 6) { + PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload " + "(len=%d) from " MACSTR "\n", dev->name, len, + MAC2STR(hdr->addr2)); + return; + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta && sta->crypt) + crypt = sta->crypt; + else { + int idx = 0; + if (skb->len >= hdrlen + 3) + idx = skb->data[hdrlen + 3] >> 6; + crypt = local->crypt[idx]; + } + + pos = (u16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + auth_alg = __le16_to_cpu(*pos); + pos++; + auth_transaction = __le16_to_cpu(*pos); + pos++; + status_code = __le16_to_cpu(*pos); + pos++; + + if (memcmp(dev->dev_addr, hdr->addr2, ETH_ALEN) == 0 || + ap_control_mac_deny(&ap->mac_restrictions, hdr->addr2)) { + txt = "authentication denied"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + if (((local->auth_algs & PRISM2_AUTH_OPEN) && + auth_alg == WLAN_AUTH_OPEN) || + ((local->auth_algs & PRISM2_AUTH_SHARED_KEY) && + crypt && auth_alg == WLAN_AUTH_SHARED_KEY)) { + } else { + txt = "unsupported algorithm"; + resp = WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG; + goto fail; + } + + if (len >= 8) { + u8 *u = (u8 *) pos; + if (*u == WLAN_EID_CHALLENGE) { + if (*(u + 1) != WLAN_AUTH_CHALLENGE_LEN) { + txt = "invalid challenge len"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + if (len - 8 < WLAN_AUTH_CHALLENGE_LEN) { + txt = "challenge underflow"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + challenge = (char *) (u + 2); + } + } + + if (sta && sta->ap) { + if (time_after(jiffies, sta->u.ap.last_beacon + + (10 * sta->listen_interval * HZ) / 1024)) { + PDEBUG(DEBUG_AP, "%s: no beacons received for a while," + " assuming AP " MACSTR " is now STA\n", + dev->name, MAC2STR(sta->addr)); + sta->ap = 0; + sta->flags = 0; + sta->u.sta.challenge = NULL; + } else { + txt = "AP trying to authenticate?"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + + if ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1) || + (auth_alg == WLAN_AUTH_SHARED_KEY && + (auth_transaction == 1 || + (auth_transaction == 3 && sta != NULL && + sta->u.sta.challenge != NULL)))) { + } else { + txt = "unknown authentication transaction number"; + resp = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; + goto fail; + } + + if (sta == NULL) { + txt = "new STA"; + + if (local->ap->num_sta >= MAX_STA_COUNT) { + /* FIX: might try to remove some old STAs first? */ + txt = "no more room for new STAs"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + sta = ap_add_sta(local->ap, hdr->addr2); + if (sta == NULL) { + txt = "ap_add_sta failed"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + + switch (auth_alg) { + case WLAN_AUTH_OPEN: + txt = "authOK"; + /* IEEE 802.11 standard is not completely clear about + * whether STA is considered authenticated after + * authentication OK frame has been send or after it + * has been ACKed. In order to reduce interoperability + * issues, mark the STA authenticated before ACK. */ + sta->flags |= WLAN_STA_AUTH; + break; + + case WLAN_AUTH_SHARED_KEY: + if (auth_transaction == 1) { + if (sta->u.sta.challenge == NULL) { + sta->u.sta.challenge = + ap_auth_make_challenge(local->ap); + if (sta->u.sta.challenge == NULL) { + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + } else { + if (sta->u.sta.challenge == NULL || + challenge == NULL || + memcmp(sta->u.sta.challenge, challenge, + WLAN_AUTH_CHALLENGE_LEN) != 0 || + !(fc & IEEE80211_FCTL_PROTECTED)) { + txt = "challenge response incorrect"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + + txt = "challenge OK - authOK"; + /* IEEE 802.11 standard is not completely clear about + * whether STA is considered authenticated after + * authentication OK frame has been send or after it + * has been ACKed. In order to reduce interoperability + * issues, mark the STA authenticated before ACK. */ + sta->flags |= WLAN_STA_AUTH; + kfree(sta->u.sta.challenge); + sta->u.sta.challenge = NULL; + } + break; + } + + fail: + pos = (u16 *) body; + *pos = cpu_to_le16(auth_alg); + pos++; + *pos = cpu_to_le16(auth_transaction + 1); + pos++; + *pos = cpu_to_le16(resp); /* status_code */ + pos++; + olen = 6; + + if (resp == WLAN_STATUS_SUCCESS && sta != NULL && + sta->u.sta.challenge != NULL && + auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 1) { + u8 *tmp = (u8 *) pos; + *tmp++ = WLAN_EID_CHALLENGE; + *tmp++ = WLAN_AUTH_CHALLENGE_LEN; + pos++; + memcpy(pos, sta->u.sta.challenge, WLAN_AUTH_CHALLENGE_LEN); + olen += 2 + WLAN_AUTH_CHALLENGE_LEN; + } + + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH, + body, olen, hdr->addr2, ap->tx_callback_auth); + + if (sta) { + sta->last_rx = jiffies; + atomic_dec(&sta->users); + } + + if (resp) { + PDEBUG(DEBUG_AP, "%s: " MACSTR " auth (alg=%d trans#=%d " + "stat=%d len=%d fc=%04x) ==> %d (%s)\n", + dev->name, MAC2STR(hdr->addr2), auth_alg, + auth_transaction, status_code, len, fc, resp, txt); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_assoc(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int reassoc) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char body[12], *p, *lpos; + int len, left; + u16 *pos; + u16 resp = WLAN_STATUS_SUCCESS; + struct sta_info *sta = NULL; + int send_deauth = 0; + char *txt = ""; + u8 prev_ap[ETH_ALEN]; + + left = len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < (reassoc ? 10 : 4)) { + PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload " + "(len=%d, reassoc=%d) from " MACSTR "\n", + dev->name, len, reassoc, MAC2STR(hdr->addr2)); + return; + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta == NULL || (sta->flags & WLAN_STA_AUTH) == 0) { + spin_unlock_bh(&local->ap->sta_table_lock); + txt = "trying to associate before authentication"; + send_deauth = 1; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + sta = NULL; /* do not decrement sta->users */ + goto fail; + } + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + pos = (u16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + sta->capability = __le16_to_cpu(*pos); + pos++; left -= 2; + sta->listen_interval = __le16_to_cpu(*pos); + pos++; left -= 2; + + if (reassoc) { + memcpy(prev_ap, pos, ETH_ALEN); + pos++; pos++; pos++; left -= 6; + } else + memset(prev_ap, 0, ETH_ALEN); + + if (left >= 2) { + unsigned int ileft; + unsigned char *u = (unsigned char *) pos; + + if (*u == WLAN_EID_SSID) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft > MAX_SSID_LEN) { + txt = "SSID overflow"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + if (ileft != strlen(local->essid) || + memcmp(local->essid, u, ileft) != 0) { + txt = "not our SSID"; + resp = WLAN_STATUS_ASSOC_DENIED_UNSPEC; + goto fail; + } + + u += ileft; + left -= ileft; + } + + if (left >= 2 && *u == WLAN_EID_SUPP_RATES) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft == 0 || + ileft > WLAN_SUPP_RATES_MAX) { + txt = "SUPP_RATES len error"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + memset(sta->supported_rates, 0, + sizeof(sta->supported_rates)); + memcpy(sta->supported_rates, u, ileft); + prism2_check_tx_rates(sta); + + u += ileft; + left -= ileft; + } + + if (left > 0) { + PDEBUG(DEBUG_AP, "%s: assoc from " MACSTR " with extra" + " data (%d bytes) [", + dev->name, MAC2STR(hdr->addr2), left); + while (left > 0) { + PDEBUG2(DEBUG_AP, "<%02x>", *u); + u++; left--; + } + PDEBUG2(DEBUG_AP, "]\n"); + } + } else { + txt = "frame underflow"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + /* get a unique AID */ + if (sta->aid > 0) + txt = "OK, old AID"; + else { + spin_lock_bh(&local->ap->sta_table_lock); + for (sta->aid = 1; sta->aid <= MAX_AID_TABLE_SIZE; sta->aid++) + if (local->ap->sta_aid[sta->aid - 1] == NULL) + break; + if (sta->aid > MAX_AID_TABLE_SIZE) { + sta->aid = 0; + spin_unlock_bh(&local->ap->sta_table_lock); + resp = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; + txt = "no room for more AIDs"; + } else { + local->ap->sta_aid[sta->aid - 1] = sta; + spin_unlock_bh(&local->ap->sta_table_lock); + txt = "OK, new AID"; + } + } + + fail: + pos = (u16 *) body; + + if (send_deauth) { + *pos = __constant_cpu_to_le16( + WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH); + pos++; + } else { + /* FIX: CF-Pollable and CF-PollReq should be set to match the + * values in beacons/probe responses */ + /* FIX: how about privacy and WEP? */ + /* capability */ + *pos = __constant_cpu_to_le16(WLAN_CAPABILITY_ESS); + pos++; + + /* status_code */ + *pos = __cpu_to_le16(resp); + pos++; + + *pos = __cpu_to_le16((sta && sta->aid > 0 ? sta->aid : 0) | + BIT(14) | BIT(15)); /* AID */ + pos++; + + /* Supported rates (Information element) */ + p = (char *) pos; + *p++ = WLAN_EID_SUPP_RATES; + lpos = p; + *p++ = 0; /* len */ + if (local->tx_rate_control & WLAN_RATE_1M) { + *p++ = local->basic_rates & WLAN_RATE_1M ? 0x82 : 0x02; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_2M) { + *p++ = local->basic_rates & WLAN_RATE_2M ? 0x84 : 0x04; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_5M5) { + *p++ = local->basic_rates & WLAN_RATE_5M5 ? + 0x8b : 0x0b; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_11M) { + *p++ = local->basic_rates & WLAN_RATE_11M ? + 0x96 : 0x16; + (*lpos)++; + } + pos = (u16 *) p; + } + + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + (send_deauth ? IEEE80211_STYPE_DEAUTH : + (reassoc ? IEEE80211_STYPE_REASSOC_RESP : + IEEE80211_STYPE_ASSOC_RESP)), + body, (u8 *) pos - (u8 *) body, + hdr->addr2, + send_deauth ? 0 : local->ap->tx_callback_assoc); + + if (sta) { + if (resp == WLAN_STATUS_SUCCESS) { + sta->last_rx = jiffies; + /* STA will be marked associated from TX callback, if + * AssocResp is ACKed */ + } + atomic_dec(&sta->users); + } + +#if 0 + PDEBUG(DEBUG_AP, "%s: " MACSTR " %sassoc (len=%d prev_ap=" MACSTR + ") => %d(%d) (%s)\n", + dev->name, MAC2STR(hdr->addr2), reassoc ? "re" : "", len, + MAC2STR(prev_ap), resp, send_deauth, txt); +#endif +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_deauth(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN); + int len; + u16 reason_code, *pos; + struct sta_info *sta = NULL; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 2) { + printk("handle_deauth - too short payload (len=%d)\n", len); + return; + } + + pos = (u16 *) body; + reason_code = __le16_to_cpu(*pos); + + PDEBUG(DEBUG_AP, "%s: deauthentication: " MACSTR " len=%d, " + "reason_code=%d\n", dev->name, MAC2STR(hdr->addr2), len, + reason_code); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) { + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); + } + spin_unlock_bh(&local->ap->sta_table_lock); + if (sta == NULL) { + printk("%s: deauthentication from " MACSTR ", " + "reason_code=%d, but STA not authenticated\n", dev->name, + MAC2STR(hdr->addr2), reason_code); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_disassoc(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = skb->data + IEEE80211_MGMT_HDR_LEN; + int len; + u16 reason_code, *pos; + struct sta_info *sta = NULL; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 2) { + printk("handle_disassoc - too short payload (len=%d)\n", len); + return; + } + + pos = (u16 *) body; + reason_code = __le16_to_cpu(*pos); + + PDEBUG(DEBUG_AP, "%s: disassociation: " MACSTR " len=%d, " + "reason_code=%d\n", dev->name, MAC2STR(hdr->addr2), len, + reason_code); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) { + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + sta->flags &= ~WLAN_STA_ASSOC; + } + spin_unlock_bh(&local->ap->sta_table_lock); + if (sta == NULL) { + printk("%s: disassociation from " MACSTR ", " + "reason_code=%d, but STA not authenticated\n", + dev->name, MAC2STR(hdr->addr2), reason_code); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void ap_handle_data_nullfunc(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + struct net_device *dev = local->dev; + + /* some STA f/w's seem to require control::ACK frame for + * data::nullfunc, but at least Prism2 station f/w version 0.8.0 does + * not send this.. + * send control::ACK for the data::nullfunc */ + + printk(KERN_DEBUG "Sending control::ACK for data::nullfunc\n"); + prism2_send_mgmt(dev, IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK, + NULL, 0, hdr->addr2, 0); +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void ap_handle_dropped_data(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + struct net_device *dev = local->dev; + struct sta_info *sta; + u16 reason; + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC)) { + PDEBUG(DEBUG_AP, "ap_handle_dropped_data: STA is now okay?\n"); + atomic_dec(&sta->users); + return; + } + + reason = __constant_cpu_to_le16( + WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + ((sta == NULL || !(sta->flags & WLAN_STA_ASSOC)) ? + IEEE80211_STYPE_DEAUTH : IEEE80211_STYPE_DISASSOC), + (char *) &reason, sizeof(reason), hdr->addr2, 0); + + if (sta) + atomic_dec(&sta->users); +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +/* Called only as a scheduled task for pending AP frames. */ +static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta, + struct sk_buff *skb) +{ + struct hostap_skb_tx_data *meta; + + if (!(sta->flags & WLAN_STA_PS)) { + /* Station has moved to non-PS mode, so send all buffered + * frames using normal device queue. */ + dev_queue_xmit(skb); + return; + } + + /* add a flag for hostap_handle_sta_tx() to know that this skb should + * be passed through even though STA is using PS */ + meta = (struct hostap_skb_tx_data *) skb->cb; + meta->flags |= HOSTAP_TX_FLAGS_BUFFERED_FRAME; + if (!skb_queue_empty(&sta->tx_buf)) { + /* indicate to STA that more frames follow */ + meta->flags |= HOSTAP_TX_FLAGS_ADD_MOREDATA; + } + dev_queue_xmit(skb); +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_pspoll(local_info_t *local, + struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct sta_info *sta; + u16 aid; + struct sk_buff *skb; + + PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=" MACSTR ", TA=" MACSTR + " PWRMGT=%d\n", + MAC2STR(hdr->addr1), MAC2STR(hdr->addr2), + !!(le16_to_cpu(hdr->frame_ctl) & IEEE80211_FCTL_PM)); + + if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) { + PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=" MACSTR + " not own MAC\n", MAC2STR(hdr->addr1)); + return; + } + + aid = __le16_to_cpu(hdr->duration_id); + if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) { + PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); + return; + } + aid &= ~BIT(15) & ~BIT(14); + if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { + PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); + return; + } + PDEBUG(DEBUG_PS2, " aid=%d\n", aid); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta == NULL) { + PDEBUG(DEBUG_PS, " STA not found\n"); + return; + } + if (sta->aid != aid) { + PDEBUG(DEBUG_PS, " received aid=%i does not match with " + "assoc.aid=%d\n", aid, sta->aid); + return; + } + + /* FIX: todo: + * - add timeout for buffering (clear aid in TIM vector if buffer timed + * out (expiry time must be longer than ListenInterval for + * the corresponding STA; "8802-11: 11.2.1.9 AP aging function" + * - what to do, if buffered, pspolled, and sent frame is not ACKed by + * sta; store buffer for later use and leave TIM aid bit set? use + * TX event to check whether frame was ACKed? + */ + + while ((skb = skb_dequeue(&sta->tx_buf)) != NULL) { + /* send buffered frame .. */ + PDEBUG(DEBUG_PS2, "Sending buffered frame to STA after PS POLL" + " (buffer_count=%d)\n", skb_queue_len(&sta->tx_buf)); + + pspoll_send_buffered(local, sta, skb); + + if (sta->flags & WLAN_STA_PS) { + /* send only one buffered packet per PS Poll */ + /* FIX: should ignore further PS Polls until the + * buffered packet that was just sent is acknowledged + * (Tx or TxExc event) */ + break; + } + } + + if (skb_queue_empty(&sta->tx_buf)) { + /* try to clear aid from TIM */ + if (!(sta->flags & WLAN_STA_TIM)) + PDEBUG(DEBUG_PS2, "Re-unsetting TIM for aid %d\n", + aid); + hostap_set_tim(local, aid, 0); + sta->flags &= ~WLAN_STA_TIM; + } + + atomic_dec(&sta->users); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void handle_wds_oper_queue(void *data) +{ + local_info_t *local = data; + struct wds_oper_data *entry, *prev; + + spin_lock_bh(&local->lock); + entry = local->ap->wds_oper_entries; + local->ap->wds_oper_entries = NULL; + spin_unlock_bh(&local->lock); + + while (entry) { + PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection " + "to AP " MACSTR "\n", + local->dev->name, + entry->type == WDS_ADD ? "adding" : "removing", + MAC2STR(entry->addr)); + if (entry->type == WDS_ADD) + prism2_wds_add(local, entry->addr, 0); + else if (entry->type == WDS_DEL) + prism2_wds_del(local, entry->addr, 0, 1); + + prev = entry; + entry = entry->next; + kfree(prev); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_beacon(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = skb->data + IEEE80211_MGMT_HDR_LEN; + int len, left; + u16 *pos, beacon_int, capability; + char *ssid = NULL; + unsigned char *supp_rates = NULL; + int ssid_len = 0, supp_rates_len = 0; + struct sta_info *sta = NULL; + int new_sta = 0, channel = -1; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 8 + 2 + 2) { + printk(KERN_DEBUG "handle_beacon - too short payload " + "(len=%d)\n", len); + return; + } + + pos = (u16 *) body; + left = len; + + /* Timestamp (8 octets) */ + pos += 4; left -= 8; + /* Beacon interval (2 octets) */ + beacon_int = __le16_to_cpu(*pos); + pos++; left -= 2; + /* Capability information (2 octets) */ + capability = __le16_to_cpu(*pos); + pos++; left -= 2; + + if (local->ap->ap_policy != AP_OTHER_AP_EVEN_IBSS && + capability & WLAN_CAPABILITY_IBSS) + return; + + if (left >= 2) { + unsigned int ileft; + unsigned char *u = (unsigned char *) pos; + + if (*u == WLAN_EID_SSID) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft > MAX_SSID_LEN) { + PDEBUG(DEBUG_AP, "SSID: overflow\n"); + return; + } + + if (local->ap->ap_policy == AP_OTHER_AP_SAME_SSID && + (ileft != strlen(local->essid) || + memcmp(local->essid, u, ileft) != 0)) { + /* not our SSID */ + return; + } + + ssid = u; + ssid_len = ileft; + + u += ileft; + left -= ileft; + } + + if (*u == WLAN_EID_SUPP_RATES) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft == 0 || ileft > 8) { + PDEBUG(DEBUG_AP, " - SUPP_RATES len error\n"); + return; + } + + supp_rates = u; + supp_rates_len = ileft; + + u += ileft; + left -= ileft; + } + + if (*u == WLAN_EID_DS_PARAMS) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft != 1) { + PDEBUG(DEBUG_AP, " - DS_PARAMS len error\n"); + return; + } + + channel = *u; + + u += ileft; + left -= ileft; + } + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta == NULL) { + /* add new AP */ + new_sta = 1; + sta = ap_add_sta(local->ap, hdr->addr2); + if (sta == NULL) { + printk(KERN_INFO "prism2: kmalloc failed for AP " + "data structure\n"); + return; + } + hostap_event_new_sta(local->dev, sta); + + /* mark APs authentication and associated for pseudo ad-hoc + * style communication */ + sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; + + if (local->ap->autom_ap_wds) { + hostap_wds_link_oper(local, sta->addr, WDS_ADD); + } + } + + sta->ap = 1; + if (ssid) { + sta->u.ap.ssid_len = ssid_len; + memcpy(sta->u.ap.ssid, ssid, ssid_len); + sta->u.ap.ssid[ssid_len] = '\0'; + } else { + sta->u.ap.ssid_len = 0; + sta->u.ap.ssid[0] = '\0'; + } + sta->u.ap.channel = channel; + sta->rx_packets++; + sta->rx_bytes += len; + sta->u.ap.last_beacon = sta->last_rx = jiffies; + sta->capability = capability; + sta->listen_interval = beacon_int; + + atomic_dec(&sta->users); + + if (new_sta) { + memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); + memcpy(sta->supported_rates, supp_rates, supp_rates_len); + prism2_check_tx_rates(sta); + } +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +/* Called only as a tasklet. */ +static void handle_ap_item(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + struct net_device *dev = local->dev; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + u16 fc, type, stype; + struct ieee80211_hdr *hdr; + + /* FIX: should give skb->len to handler functions and check that the + * buffer is long enough */ + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + type = WLAN_FC_GET_TYPE(fc); + stype = WLAN_FC_GET_STYPE(fc); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (!local->hostapd && type == IEEE80211_FTYPE_DATA) { + PDEBUG(DEBUG_AP, "handle_ap_item - data frame\n"); + + if (!(fc & IEEE80211_FCTL_TODS) || + (fc & IEEE80211_FCTL_FROMDS)) { + if (stype == IEEE80211_STYPE_NULLFUNC) { + /* no ToDS nullfunc seems to be used to check + * AP association; so send reject message to + * speed up re-association */ + ap_handle_dropped_data(local, hdr); + goto done; + } + PDEBUG(DEBUG_AP, " not ToDS frame (fc=0x%04x)\n", + fc); + goto done; + } + + if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)=" + MACSTR " not own MAC\n", + MAC2STR(hdr->addr1)); + goto done; + } + + if (local->ap->nullfunc_ack && + stype == IEEE80211_STYPE_NULLFUNC) + ap_handle_data_nullfunc(local, hdr); + else + ap_handle_dropped_data(local, hdr); + goto done; + } + + if (type == IEEE80211_FTYPE_MGMT && stype == IEEE80211_STYPE_BEACON) { + handle_beacon(local, skb, rx_stats); + goto done; + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + if (type == IEEE80211_FTYPE_CTL && stype == IEEE80211_STYPE_PSPOLL) { + handle_pspoll(local, hdr, rx_stats); + goto done; + } + + if (local->hostapd) { + PDEBUG(DEBUG_AP, "Unknown frame in AP queue: type=0x%02x " + "subtype=0x%02x\n", type, stype); + goto done; + } + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (type != IEEE80211_FTYPE_MGMT) { + PDEBUG(DEBUG_AP, "handle_ap_item - not a management frame?\n"); + goto done; + } + + if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=" MACSTR + " not own MAC\n", MAC2STR(hdr->addr1)); + goto done; + } + + if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=" MACSTR + " not own MAC\n", MAC2STR(hdr->addr3)); + goto done; + } + + switch (stype) { + case IEEE80211_STYPE_ASSOC_REQ: + handle_assoc(local, skb, rx_stats, 0); + break; + case IEEE80211_STYPE_ASSOC_RESP: + PDEBUG(DEBUG_AP, "==> ASSOC RESP (ignored)\n"); + break; + case IEEE80211_STYPE_REASSOC_REQ: + handle_assoc(local, skb, rx_stats, 1); + break; + case IEEE80211_STYPE_REASSOC_RESP: + PDEBUG(DEBUG_AP, "==> REASSOC RESP (ignored)\n"); + break; + case IEEE80211_STYPE_ATIM: + PDEBUG(DEBUG_AP, "==> ATIM (ignored)\n"); + break; + case IEEE80211_STYPE_DISASSOC: + handle_disassoc(local, skb, rx_stats); + break; + case IEEE80211_STYPE_AUTH: + handle_authen(local, skb, rx_stats); + break; + case IEEE80211_STYPE_DEAUTH: + handle_deauth(local, skb, rx_stats); + break; + default: + PDEBUG(DEBUG_AP, "Unknown mgmt frame subtype 0x%02x\n", + stype >> 4); + break; + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + done: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +void hostap_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 fc; + struct ieee80211_hdr *hdr; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < 16) + goto drop; + + local->stats.rx_packets++; + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_ctl); + + if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL && + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_MGMT && + WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_BEACON) + goto drop; + + skb->protocol = __constant_htons(ETH_P_HOSTAP); + handle_ap_item(local, skb, rx_stats); + return; + + drop: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void schedule_packet_send(local_info_t *local, struct sta_info *sta) +{ + struct sk_buff *skb; + struct ieee80211_hdr *hdr; + struct hostap_80211_rx_status rx_stats; + + if (skb_queue_empty(&sta->tx_buf)) + return; + + skb = dev_alloc_skb(16); + if (skb == NULL) { + printk(KERN_DEBUG "%s: schedule_packet_send: skb alloc " + "failed\n", local->dev->name); + return; + } + + hdr = (struct ieee80211_hdr *) skb_put(skb, 16); + + /* Generate a fake pspoll frame to start packet delivery */ + hdr->frame_ctl = __constant_cpu_to_le16( + IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); + memcpy(hdr->addr1, local->dev->dev_addr, ETH_ALEN); + memcpy(hdr->addr2, sta->addr, ETH_ALEN); + hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14)); + + PDEBUG(DEBUG_PS2, "%s: Scheduling buffered packet delivery for " + "STA " MACSTR "\n", local->dev->name, MAC2STR(sta->addr)); + + skb->dev = local->dev; + + memset(&rx_stats, 0, sizeof(rx_stats)); + hostap_rx(local->dev, skb, &rx_stats); +} + + +static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], + struct iw_quality qual[], int buf_size, + int aplist) +{ + struct ap_data *ap = local->ap; + struct list_head *ptr; + int count = 0; + + spin_lock_bh(&ap->sta_table_lock); + + for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; + ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + + if (aplist && !sta->ap) + continue; + addr[count].sa_family = ARPHRD_ETHER; + memcpy(addr[count].sa_data, sta->addr, ETH_ALEN); + if (sta->last_rx_silence == 0) + qual[count].qual = sta->last_rx_signal < 27 ? + 0 : (sta->last_rx_signal - 27) * 92 / 127; + else + qual[count].qual = sta->last_rx_signal - + sta->last_rx_silence - 35; + qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); + qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); + qual[count].updated = sta->last_rx_updated; + + sta->last_rx_updated = 0; + + count++; + if (count >= buf_size) + break; + } + spin_unlock_bh(&ap->sta_table_lock); + + return count; +} + + +/* Translate our list of Access Points & Stations to a card independant + * format that the Wireless Tools will understand - Jean II */ +static int prism2_ap_translate_scan(struct net_device *dev, char *buffer) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ap_data *ap; + struct list_head *ptr; + struct iw_event iwe; + char *current_ev = buffer; + char *end_buf = buffer + IW_SCAN_MAX_DATA; +#if !defined(PRISM2_NO_KERNEL_IEEE80211_MGMT) + char buf[64]; +#endif + + iface = netdev_priv(dev); + local = iface->local; + ap = local->ap; + + spin_lock_bh(&ap->sta_table_lock); + + for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; + ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + + /* First entry *MUST* be the AP MAC address */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN); + iwe.len = IW_EV_ADDR_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_ADDR_LEN); + + /* Use the mode to indicate if it's a station or + * an Access Point */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWMODE; + if (sta->ap) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_INFRA; + iwe.len = IW_EV_UINT_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_UINT_LEN); + + /* Some quality */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVQUAL; + if (sta->last_rx_silence == 0) + iwe.u.qual.qual = sta->last_rx_signal < 27 ? + 0 : (sta->last_rx_signal - 27) * 92 / 127; + else + iwe.u.qual.qual = sta->last_rx_signal - + sta->last_rx_silence - 35; + iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); + iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); + iwe.u.qual.updated = sta->last_rx_updated; + iwe.len = IW_EV_QUAL_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_QUAL_LEN); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->ap) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.length = sta->u.ap.ssid_len; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, + sta->u.ap.ssid); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWENCODE; + if (sta->capability & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = + IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, + sta->u.ap.ssid + /* 0 byte memcpy */); + + if (sta->u.ap.channel > 0 && + sta->u.ap.channel <= FREQ_COUNT) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = freq_list[sta->u.ap.channel - 1] + * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event( + current_ev, end_buf, &iwe, + IW_EV_FREQ_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "beacon_interval=%d", + sta->listen_interval); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, buf); + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + sta->last_rx_updated = 0; + + /* To be continued, we should make good use of IWEVCUSTOM */ + } + + spin_unlock_bh(&ap->sta_table_lock); + + return current_ev - buffer; +} + + +static int prism2_hostapd_add_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (sta == NULL) { + sta = ap_add_sta(ap, param->sta_addr); + if (sta == NULL) + return -1; + } + + if (!(sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_new_sta(sta->local->dev, sta); + + sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC; + sta->last_rx = jiffies; + sta->aid = param->u.add_sta.aid; + sta->capability = param->u.add_sta.capability; + sta->tx_supp_rates = param->u.add_sta.tx_supp_rates; + if (sta->tx_supp_rates & WLAN_RATE_1M) + sta->supported_rates[0] = 2; + if (sta->tx_supp_rates & WLAN_RATE_2M) + sta->supported_rates[1] = 4; + if (sta->tx_supp_rates & WLAN_RATE_5M5) + sta->supported_rates[2] = 11; + if (sta->tx_supp_rates & WLAN_RATE_11M) + sta->supported_rates[3] = 22; + prism2_check_tx_rates(sta); + atomic_dec(&sta->users); + return 0; +} + + +static int prism2_hostapd_remove_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + + return 0; +} + + +static int prism2_hostapd_get_info_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + param->u.get_info_sta.inactive_sec = (jiffies - sta->last_rx) / HZ; + + atomic_dec(&sta->users); + + return 1; +} + + +static int prism2_hostapd_set_flags_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + sta->flags |= param->u.set_flags_sta.flags_or; + sta->flags &= param->u.set_flags_sta.flags_and; + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + return 0; +} + + +static int prism2_hostapd_sta_clear_stats(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + int rate; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + sta->rx_packets = sta->tx_packets = 0; + sta->rx_bytes = sta->tx_bytes = 0; + for (rate = 0; rate < WLAN_RATE_COUNT; rate++) { + sta->tx_count[rate] = 0; + sta->rx_count[rate] = 0; + } + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + return 0; +} + + +static int prism2_hostapd(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + switch (param->cmd) { + case PRISM2_HOSTAPD_FLUSH: + ap_control_kickall(ap); + return 0; + case PRISM2_HOSTAPD_ADD_STA: + return prism2_hostapd_add_sta(ap, param); + case PRISM2_HOSTAPD_REMOVE_STA: + return prism2_hostapd_remove_sta(ap, param); + case PRISM2_HOSTAPD_GET_INFO_STA: + return prism2_hostapd_get_info_sta(ap, param); + case PRISM2_HOSTAPD_SET_FLAGS_STA: + return prism2_hostapd_set_flags_sta(ap, param); + case PRISM2_HOSTAPD_STA_CLEAR_STATS: + return prism2_hostapd_sta_clear_stats(ap, param); + default: + printk(KERN_WARNING "prism2_hostapd: unknown cmd=%d\n", + param->cmd); + return -EOPNOTSUPP; + } +} + + +/* Update station info for host-based TX rate control and return current + * TX rate */ +static int ap_update_sta_tx_rate(struct sta_info *sta, struct net_device *dev) +{ + int ret = sta->tx_rate; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + sta->tx_count[sta->tx_rate_idx]++; + sta->tx_since_last_failure++; + sta->tx_consecutive_exc = 0; + if (sta->tx_since_last_failure >= WLAN_RATE_UPDATE_COUNT && + sta->tx_rate_idx < sta->tx_max_rate) { + /* use next higher rate */ + int old_rate, new_rate; + old_rate = new_rate = sta->tx_rate_idx; + while (new_rate < sta->tx_max_rate) { + new_rate++; + if (ap_tx_rate_ok(new_rate, sta, local)) { + sta->tx_rate_idx = new_rate; + break; + } + } + if (old_rate != sta->tx_rate_idx) { + switch (sta->tx_rate_idx) { + case 0: sta->tx_rate = 10; break; + case 1: sta->tx_rate = 20; break; + case 2: sta->tx_rate = 55; break; + case 3: sta->tx_rate = 110; break; + default: sta->tx_rate = 0; break; + } + PDEBUG(DEBUG_AP, "%s: STA " MACSTR " TX rate raised to" + " %d\n", dev->name, MAC2STR(sta->addr), + sta->tx_rate); + } + sta->tx_since_last_failure = 0; + } + + return ret; +} + + +/* Called only from software IRQ. Called for each TX frame prior possible + * encryption and transmit. */ +ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) +{ + struct sta_info *sta = NULL; + struct sk_buff *skb = tx->skb; + int set_tim, ret; + struct ieee80211_hdr *hdr; + struct hostap_skb_tx_data *meta; + + meta = (struct hostap_skb_tx_data *) skb->cb; + ret = AP_TX_CONTINUE; + if (local->ap == NULL || skb->len < 10 || + meta->iface->type == HOSTAP_INTERFACE_STA) + goto out; + + hdr = (struct ieee80211_hdr *) skb->data; + + if (hdr->addr1[0] & 0x01) { + /* broadcast/multicast frame - no AP related processing */ + goto out; + } + + /* unicast packet - check whether destination STA is associated */ + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (local->iw_mode == IW_MODE_MASTER && sta == NULL && + !(meta->flags & HOSTAP_TX_FLAGS_WDS) && + meta->iface->type != HOSTAP_INTERFACE_MASTER && + meta->iface->type != HOSTAP_INTERFACE_AP) { +#if 0 + /* This can happen, e.g., when wlan0 is added to a bridge and + * bridging code does not know which port is the correct target + * for a unicast frame. In this case, the packet is send to all + * ports of the bridge. Since this is a valid scenario, do not + * print out any errors here. */ + if (net_ratelimit()) { + printk(KERN_DEBUG "AP: drop packet to non-associated " + "STA " MACSTR "\n", MAC2STR(hdr->addr1)); + } +#endif + local->ap->tx_drop_nonassoc++; + ret = AP_TX_DROP; + goto out; + } + + if (sta == NULL) + goto out; + + if (!(sta->flags & WLAN_STA_AUTHORIZED)) + ret = AP_TX_CONTINUE_NOT_AUTHORIZED; + + /* Set tx_rate if using host-based TX rate control */ + if (!local->fw_tx_rate_control) + local->ap->last_tx_rate = meta->rate = + ap_update_sta_tx_rate(sta, local->dev); + + if (local->iw_mode != IW_MODE_MASTER) + goto out; + + if (!(sta->flags & WLAN_STA_PS)) + goto out; + + if (meta->flags & HOSTAP_TX_FLAGS_ADD_MOREDATA) { + /* indicate to STA that more frames follow */ + hdr->frame_ctl |= + __constant_cpu_to_le16(IEEE80211_FCTL_MOREDATA); + } + + if (meta->flags & HOSTAP_TX_FLAGS_BUFFERED_FRAME) { + /* packet was already buffered and now send due to + * PS poll, so do not rebuffer it */ + goto out; + } + + if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) { + PDEBUG(DEBUG_PS, "%s: No more space in STA (" MACSTR ")'s PS " + "mode buffer\n", local->dev->name, MAC2STR(sta->addr)); + /* Make sure that TIM is set for the station (it might not be + * after AP wlan hw reset). */ + /* FIX: should fix hw reset to restore bits based on STA + * buffer state.. */ + hostap_set_tim(local, sta->aid, 1); + sta->flags |= WLAN_STA_TIM; + ret = AP_TX_DROP; + goto out; + } + + /* STA in PS mode, buffer frame for later delivery */ + set_tim = skb_queue_empty(&sta->tx_buf); + skb_queue_tail(&sta->tx_buf, skb); + /* FIX: could save RX time to skb and expire buffered frames after + * some time if STA does not poll for them */ + + if (set_tim) { + if (sta->flags & WLAN_STA_TIM) + PDEBUG(DEBUG_PS2, "Re-setting TIM for aid %d\n", + sta->aid); + hostap_set_tim(local, sta->aid, 1); + sta->flags |= WLAN_STA_TIM; + } + + ret = AP_TX_BUFFERED; + + out: + if (sta != NULL) { + if (ret == AP_TX_CONTINUE || + ret == AP_TX_CONTINUE_NOT_AUTHORIZED) { + sta->tx_packets++; + sta->tx_bytes += skb->len; + sta->last_tx = jiffies; + } + + if ((ret == AP_TX_CONTINUE || + ret == AP_TX_CONTINUE_NOT_AUTHORIZED) && + sta->crypt && tx->host_encrypt) { + tx->crypt = sta->crypt; + tx->sta_ptr = sta; /* hostap_handle_sta_release() will + * be called to release sta info + * later */ + } else + atomic_dec(&sta->users); + } + + return ret; +} + + +void hostap_handle_sta_release(void *ptr) +{ + struct sta_info *sta = ptr; + atomic_dec(&sta->users); +} + + +/* Called only as a tasklet (software IRQ) */ +void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb) +{ + struct sta_info *sta; + struct ieee80211_hdr *hdr; + struct hostap_skb_tx_data *meta; + + hdr = (struct ieee80211_hdr *) skb->data; + meta = (struct hostap_skb_tx_data *) skb->cb; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr1); + if (!sta) { + spin_unlock(&local->ap->sta_table_lock); + PDEBUG(DEBUG_AP, "%s: Could not find STA " MACSTR " for this " + "TX error (@%lu)\n", + local->dev->name, MAC2STR(hdr->addr1), jiffies); + return; + } + + sta->tx_since_last_failure = 0; + sta->tx_consecutive_exc++; + + if (sta->tx_consecutive_exc >= WLAN_RATE_DECREASE_THRESHOLD && + sta->tx_rate_idx > 0 && meta->rate <= sta->tx_rate) { + /* use next lower rate */ + int old, rate; + old = rate = sta->tx_rate_idx; + while (rate > 0) { + rate--; + if (ap_tx_rate_ok(rate, sta, local)) { + sta->tx_rate_idx = rate; + break; + } + } + if (old != sta->tx_rate_idx) { + switch (sta->tx_rate_idx) { + case 0: sta->tx_rate = 10; break; + case 1: sta->tx_rate = 20; break; + case 2: sta->tx_rate = 55; break; + case 3: sta->tx_rate = 110; break; + default: sta->tx_rate = 0; break; + } + PDEBUG(DEBUG_AP, "%s: STA " MACSTR " TX rate lowered " + "to %d\n", local->dev->name, MAC2STR(sta->addr), + sta->tx_rate); + } + sta->tx_consecutive_exc = 0; + } + spin_unlock(&local->ap->sta_table_lock); +} + + +static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta, + int pwrmgt, int type, int stype) +{ + if (pwrmgt && !(sta->flags & WLAN_STA_PS)) { + sta->flags |= WLAN_STA_PS; + PDEBUG(DEBUG_PS2, "STA " MACSTR " changed to use PS " + "mode (type=0x%02X, stype=0x%02X)\n", + MAC2STR(sta->addr), type >> 2, stype >> 4); + } else if (!pwrmgt && (sta->flags & WLAN_STA_PS)) { + sta->flags &= ~WLAN_STA_PS; + PDEBUG(DEBUG_PS2, "STA " MACSTR " changed to not use " + "PS mode (type=0x%02X, stype=0x%02X)\n", + MAC2STR(sta->addr), type >> 2, stype >> 4); + if (type != IEEE80211_FTYPE_CTL || + stype != IEEE80211_STYPE_PSPOLL) + schedule_packet_send(local, sta); + } +} + + +/* Called only as a tasklet (software IRQ). Called for each RX frame to update + * STA power saving state. pwrmgt is a flag from 802.11 frame_ctl field. */ +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr) +{ + struct sta_info *sta; + u16 fc; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (!sta) + return -1; + + fc = le16_to_cpu(hdr->frame_ctl); + hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, + WLAN_FC_GET_TYPE(fc), WLAN_FC_GET_STYPE(fc)); + + atomic_dec(&sta->users); + return 0; +} + + +/* Called only as a tasklet (software IRQ). Called for each RX frame after + * getting RX header and payload from hardware. */ +ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, + struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, + int wds) +{ + int ret; + struct sta_info *sta; + u16 fc, type, stype; + struct ieee80211_hdr *hdr; + + if (local->ap == NULL) + return AP_RX_CONTINUE; + + hdr = (struct ieee80211_hdr *) skb->data; + + fc = le16_to_cpu(hdr->frame_ctl); + type = WLAN_FC_GET_TYPE(fc); + stype = WLAN_FC_GET_STYPE(fc); + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (sta && !(sta->flags & WLAN_STA_AUTHORIZED)) + ret = AP_RX_CONTINUE_NOT_AUTHORIZED; + else + ret = AP_RX_CONTINUE; + + + if (fc & IEEE80211_FCTL_TODS) { + if (!wds && (sta == NULL || !(sta->flags & WLAN_STA_ASSOC))) { + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NON_ASSOC); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + printk(KERN_DEBUG "%s: dropped received packet" + " from non-associated STA " MACSTR + " (type=0x%02x, subtype=0x%02x)\n", + dev->name, MAC2STR(hdr->addr2), + type >> 2, stype >> 4); + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } + } else if (fc & IEEE80211_FCTL_FROMDS) { + if (!wds) { + /* FromDS frame - not for us; probably + * broadcast/multicast in another BSS - drop */ + if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) { + printk(KERN_DEBUG "Odd.. FromDS packet " + "received with own BSSID\n"); + hostap_dump_rx_80211(dev->name, skb, rx_stats); + } + ret = AP_RX_DROP; + goto out; + } + } else if (stype == IEEE80211_STYPE_NULLFUNC && sta == NULL && + memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) { + + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NON_ASSOC); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + /* At least Lucent f/w seems to send data::nullfunc + * frames with no ToDS flag when the current AP returns + * after being unavailable for some time. Speed up + * re-association by informing the station about it not + * being associated. */ + printk(KERN_DEBUG "%s: rejected received nullfunc " + "frame without ToDS from not associated STA " + MACSTR "\n", + dev->name, MAC2STR(hdr->addr2)); + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } else if (stype == IEEE80211_STYPE_NULLFUNC) { + /* At least Lucent cards seem to send periodic nullfunc + * frames with ToDS. Let these through to update SQ + * stats and PS state. Nullfunc frames do not contain + * any data and they will be dropped below. */ + } else { + /* If BSSID (Addr3) is foreign, this frame is a normal + * broadcast frame from an IBSS network. Drop it silently. + * If BSSID is own, report the dropping of this frame. */ + if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) { + printk(KERN_DEBUG "%s: dropped received packet from " + MACSTR " with no ToDS flag (type=0x%02x, " + "subtype=0x%02x)\n", dev->name, + MAC2STR(hdr->addr2), type >> 2, stype >> 4); + hostap_dump_rx_80211(dev->name, skb, rx_stats); + } + ret = AP_RX_DROP; + goto out; + } + + if (sta) { + hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, + type, stype); + + sta->rx_packets++; + sta->rx_bytes += skb->len; + sta->last_rx = jiffies; + } + + if (local->ap->nullfunc_ack && stype == IEEE80211_STYPE_NULLFUNC && + fc & IEEE80211_FCTL_TODS) { + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NULLFUNC_ACK); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + /* some STA f/w's seem to require control::ACK frame + * for data::nullfunc, but Prism2 f/w 0.8.0 (at least + * from Compaq) does not send this.. Try to generate + * ACK for these frames from the host driver to make + * power saving work with, e.g., Lucent WaveLAN f/w */ + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } + + out: + if (sta) + atomic_dec(&sta->users); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_handle_sta_crypto(local_info_t *local, + struct ieee80211_hdr *hdr, + struct ieee80211_crypt_data **crypt, + void **sta_ptr) +{ + struct sta_info *sta; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (!sta) + return -1; + + if (sta->crypt) { + *crypt = sta->crypt; + *sta_ptr = sta; + /* hostap_handle_sta_release() will be called to release STA + * info */ + } else + atomic_dec(&sta->users); + + return 0; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 0; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap) + ret = 1; + spin_unlock(&ap->sta_table_lock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 0; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap && + ((sta->flags & WLAN_STA_AUTHORIZED) || + ap->local->ieee_802_1x == 0)) + ret = 1; + spin_unlock(&ap->sta_table_lock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_add_sta(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 1; + + if (!ap) + return -1; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta) + ret = 0; + spin_unlock(&ap->sta_table_lock); + + if (ret == 1) { + sta = ap_add_sta(ap, sta_addr); + if (!sta) + ret = -1; + sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; + sta->ap = 1; + memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); + /* No way of knowing which rates are supported since we did not + * get supported rates element from beacon/assoc req. Assume + * that remote end supports all 802.11b rates. */ + sta->supported_rates[0] = 0x82; + sta->supported_rates[1] = 0x84; + sta->supported_rates[2] = 0x0b; + sta->supported_rates[3] = 0x16; + sta->tx_supp_rates = WLAN_RATE_1M | WLAN_RATE_2M | + WLAN_RATE_5M5 | WLAN_RATE_11M; + sta->tx_rate = 110; + sta->tx_max_rate = sta->tx_rate_idx = 3; + } + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_update_rx_stats(struct ap_data *ap, + struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats) +{ + struct sta_info *sta; + + if (!ap) + return -1; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr2); + if (sta) { + sta->last_rx_silence = rx_stats->noise; + sta->last_rx_signal = rx_stats->signal; + sta->last_rx_rate = rx_stats->rate; + sta->last_rx_updated = 7; + if (rx_stats->rate == 10) + sta->rx_count[0]++; + else if (rx_stats->rate == 20) + sta->rx_count[1]++; + else if (rx_stats->rate == 55) + sta->rx_count[2]++; + else if (rx_stats->rate == 110) + sta->rx_count[3]++; + } + spin_unlock(&ap->sta_table_lock); + + return sta ? 0 : -1; +} + + +void hostap_update_rates(local_info_t *local) +{ + struct list_head *ptr; + struct ap_data *ap = local->ap; + + if (!ap) + return; + + spin_lock_bh(&ap->sta_table_lock); + for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + prism2_check_tx_rates(sta); + } + spin_unlock_bh(&ap->sta_table_lock); +} + + +static void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, + struct ieee80211_crypt_data ***crypt) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta && permanent) + sta = ap_add_sta(ap, addr); + + if (!sta) + return NULL; + + if (permanent) + sta->flags |= WLAN_STA_PERM; + + *crypt = &sta->crypt; + + return sta; +} + + +void hostap_add_wds_links(local_info_t *local) +{ + struct ap_data *ap = local->ap; + struct list_head *ptr; + + spin_lock_bh(&ap->sta_table_lock); + list_for_each(ptr, &ap->sta_list) { + struct sta_info *sta = list_entry(ptr, struct sta_info, list); + if (sta->ap) + hostap_wds_link_oper(local, sta->addr, WDS_ADD); + } + spin_unlock_bh(&ap->sta_table_lock); + + schedule_work(&local->ap->wds_oper_queue); +} + + +void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type) +{ + struct wds_oper_data *entry; + + entry = kmalloc(sizeof(*entry), GFP_ATOMIC); + if (!entry) + return; + memcpy(entry->addr, addr, ETH_ALEN); + entry->type = type; + spin_lock_bh(&local->lock); + entry->next = local->ap->wds_oper_entries; + local->ap->wds_oper_entries = entry; + spin_unlock_bh(&local->lock); + + schedule_work(&local->ap->wds_oper_queue); +} + + +EXPORT_SYMBOL(hostap_init_data); +EXPORT_SYMBOL(hostap_init_ap_proc); +EXPORT_SYMBOL(hostap_free_data); +EXPORT_SYMBOL(hostap_check_sta_fw_version); +EXPORT_SYMBOL(hostap_handle_sta_tx); +EXPORT_SYMBOL(hostap_handle_sta_release); +EXPORT_SYMBOL(hostap_handle_sta_tx_exc); +EXPORT_SYMBOL(hostap_update_sta_ps); +EXPORT_SYMBOL(hostap_handle_sta_rx); +EXPORT_SYMBOL(hostap_is_sta_assoc); +EXPORT_SYMBOL(hostap_is_sta_authorized); +EXPORT_SYMBOL(hostap_add_sta); +EXPORT_SYMBOL(hostap_update_rates); +EXPORT_SYMBOL(hostap_add_wds_links); +EXPORT_SYMBOL(hostap_wds_link_oper); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +EXPORT_SYMBOL(hostap_deauth_all_stas); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h new file mode 100644 index 00000000000..816a52bcea8 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_ap.h @@ -0,0 +1,261 @@ +#ifndef HOSTAP_AP_H +#define HOSTAP_AP_H + +/* AP data structures for STAs */ + +/* maximum number of frames to buffer per STA */ +#define STA_MAX_TX_BUFFER 32 + +/* STA flags */ +#define WLAN_STA_AUTH BIT(0) +#define WLAN_STA_ASSOC BIT(1) +#define WLAN_STA_PS BIT(2) +#define WLAN_STA_TIM BIT(3) /* TIM bit is on for PS stations */ +#define WLAN_STA_PERM BIT(4) /* permanent; do not remove entry on expiration */ +#define WLAN_STA_AUTHORIZED BIT(5) /* If 802.1X is used, this flag is + * controlling whether STA is authorized to + * send and receive non-IEEE 802.1X frames + */ +#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */ + +#define WLAN_RATE_1M BIT(0) +#define WLAN_RATE_2M BIT(1) +#define WLAN_RATE_5M5 BIT(2) +#define WLAN_RATE_11M BIT(3) +#define WLAN_RATE_COUNT 4 + +/* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8, + * but some pre-standard IEEE 802.11g products use longer elements. */ +#define WLAN_SUPP_RATES_MAX 32 + +/* Try to increase TX rate after # successfully sent consecutive packets */ +#define WLAN_RATE_UPDATE_COUNT 50 + +/* Decrease TX rate after # consecutive dropped packets */ +#define WLAN_RATE_DECREASE_THRESHOLD 2 + +struct sta_info { + struct list_head list; + struct sta_info *hnext; /* next entry in hash table list */ + atomic_t users; /* number of users (do not remove if > 0) */ + struct proc_dir_entry *proc; + + u8 addr[6]; + u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */ + u32 flags; + u16 capability; + u16 listen_interval; /* or beacon_int for APs */ + u8 supported_rates[WLAN_SUPP_RATES_MAX]; + + unsigned long last_auth; + unsigned long last_assoc; + unsigned long last_rx; + unsigned long last_tx; + unsigned long rx_packets, tx_packets; + unsigned long rx_bytes, tx_bytes; + struct sk_buff_head tx_buf; + /* FIX: timeout buffers with an expiry time somehow derived from + * listen_interval */ + + s8 last_rx_silence; /* Noise in dBm */ + s8 last_rx_signal; /* Signal strength in dBm */ + u8 last_rx_rate; /* TX rate in 0.1 Mbps */ + u8 last_rx_updated; /* IWSPY's struct iw_quality::updated */ + + u8 tx_supp_rates; /* bit field of supported TX rates */ + u8 tx_rate; /* current TX rate (in 0.1 Mbps) */ + u8 tx_rate_idx; /* current TX rate (WLAN_RATE_*) */ + u8 tx_max_rate; /* max TX rate (WLAN_RATE_*) */ + u32 tx_count[WLAN_RATE_COUNT]; /* number of frames sent (per rate) */ + u32 rx_count[WLAN_RATE_COUNT]; /* number of frames received (per rate) + */ + u32 tx_since_last_failure; + u32 tx_consecutive_exc; + + struct ieee80211_crypt_data *crypt; + + int ap; /* whether this station is an AP */ + + local_info_t *local; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + union { + struct { + char *challenge; /* shared key authentication + * challenge */ + } sta; + struct { + int ssid_len; + unsigned char ssid[MAX_SSID_LEN + 1]; /* AP's ssid */ + int channel; + unsigned long last_beacon; /* last RX beacon time */ + } ap; + } u; + + struct timer_list timer; + enum { STA_NULLFUNC = 0, STA_DISASSOC, STA_DEAUTH } timeout_next; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ +}; + + +#define MAX_STA_COUNT 1024 + +/* Maximum number of AIDs to use for STAs; must be 2007 or lower + * (8802.11 limitation) */ +#define MAX_AID_TABLE_SIZE 128 + +#define STA_HASH_SIZE 256 +#define STA_HASH(sta) (sta[5]) + + +/* Default value for maximum station inactivity. After AP_MAX_INACTIVITY_SEC + * has passed since last received frame from the station, a nullfunc data + * frame is sent to the station. If this frame is not acknowledged and no other + * frames have been received, the station will be disassociated after + * AP_DISASSOC_DELAY. Similarily, a the station will be deauthenticated after + * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with + * max inactivity timer. */ +#define AP_MAX_INACTIVITY_SEC (5 * 60) +#define AP_DISASSOC_DELAY (HZ) +#define AP_DEAUTH_DELAY (HZ) + +/* ap_policy: whether to accept frames to/from other APs/IBSS */ +typedef enum { + AP_OTHER_AP_SKIP_ALL = 0, + AP_OTHER_AP_SAME_SSID = 1, + AP_OTHER_AP_ALL = 2, + AP_OTHER_AP_EVEN_IBSS = 3 +} ap_policy_enum; + +#define PRISM2_AUTH_OPEN BIT(0) +#define PRISM2_AUTH_SHARED_KEY BIT(1) + + +/* MAC address-based restrictions */ +struct mac_entry { + struct list_head list; + u8 addr[6]; +}; + +struct mac_restrictions { + enum { MAC_POLICY_OPEN = 0, MAC_POLICY_ALLOW, MAC_POLICY_DENY } policy; + unsigned int entries; + struct list_head mac_list; + spinlock_t lock; +}; + + +struct add_sta_proc_data { + u8 addr[ETH_ALEN]; + struct add_sta_proc_data *next; +}; + + +typedef enum { WDS_ADD, WDS_DEL } wds_oper_type; +struct wds_oper_data { + wds_oper_type type; + u8 addr[ETH_ALEN]; + struct wds_oper_data *next; +}; + + +struct ap_data { + int initialized; /* whether ap_data has been initialized */ + local_info_t *local; + int bridge_packets; /* send packet to associated STAs directly to the + * wireless media instead of higher layers in the + * kernel */ + unsigned int bridged_unicast; /* number of unicast frames bridged on + * wireless media */ + unsigned int bridged_multicast; /* number of non-unicast frames + * bridged on wireless media */ + unsigned int tx_drop_nonassoc; /* number of unicast TX packets dropped + * because they were to an address that + * was not associated */ + int nullfunc_ack; /* use workaround for nullfunc frame ACKs */ + + spinlock_t sta_table_lock; + int num_sta; /* number of entries in sta_list */ + struct list_head sta_list; /* STA info list head */ + struct sta_info *sta_hash[STA_HASH_SIZE]; + + struct proc_dir_entry *proc; + + ap_policy_enum ap_policy; + unsigned int max_inactivity; + int autom_ap_wds; + + struct mac_restrictions mac_restrictions; /* MAC-based auth */ + int last_tx_rate; + + struct work_struct add_sta_proc_queue; + struct add_sta_proc_data *add_sta_proc_entries; + + struct work_struct wds_oper_queue; + struct wds_oper_data *wds_oper_entries; + + u16 tx_callback_idx; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + /* pointers to STA info; based on allocated AID or NULL if AID free + * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1 + * and so on + */ + struct sta_info *sta_aid[MAX_AID_TABLE_SIZE]; + + u16 tx_callback_auth, tx_callback_assoc, tx_callback_poll; + + /* WEP operations for generating challenges to be used with shared key + * authentication */ + struct ieee80211_crypto_ops *crypt; + void *crypt_priv; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ +}; + + +void hostap_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); +void hostap_init_data(local_info_t *local); +void hostap_init_ap_proc(local_info_t *local); +void hostap_free_data(struct ap_data *ap); +void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver); + +typedef enum { + AP_TX_CONTINUE, AP_TX_DROP, AP_TX_RETRY, AP_TX_BUFFERED, + AP_TX_CONTINUE_NOT_AUTHORIZED +} ap_tx_ret; +struct hostap_tx_data { + struct sk_buff *skb; + int host_encrypt; + struct ieee80211_crypt_data *crypt; + void *sta_ptr; +}; +ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx); +void hostap_handle_sta_release(void *ptr); +void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb); +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr); +typedef enum { + AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED +} ap_rx_ret; +ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, + struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, + int wds); +int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr, + struct ieee80211_crypt_data **crypt, + void **sta_ptr); +int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr); +int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr); +int hostap_add_sta(struct ap_data *ap, u8 *sta_addr); +int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats); +void hostap_update_rates(local_info_t *local); +void hostap_add_wds_links(local_info_t *local); +void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, + int resend); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +#endif /* HOSTAP_AP_H */ diff --git a/drivers/net/wireless/hostap/hostap_common.h b/drivers/net/wireless/hostap/hostap_common.h new file mode 100644 index 00000000000..6f4fa9dc308 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_common.h @@ -0,0 +1,435 @@ +#ifndef HOSTAP_COMMON_H +#define HOSTAP_COMMON_H + +#define BIT(x) (1 << (x)) + +#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] +#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" + + +/* IEEE 802.11 defines */ + +/* Information Element IDs */ +#define WLAN_EID_SSID 0 +#define WLAN_EID_SUPP_RATES 1 +#define WLAN_EID_FH_PARAMS 2 +#define WLAN_EID_DS_PARAMS 3 +#define WLAN_EID_CF_PARAMS 4 +#define WLAN_EID_TIM 5 +#define WLAN_EID_IBSS_PARAMS 6 +#define WLAN_EID_CHALLENGE 16 +#define WLAN_EID_RSN 48 +#define WLAN_EID_GENERIC 221 + + +/* HFA384X Configuration RIDs */ +#define HFA384X_RID_CNFPORTTYPE 0xFC00 +#define HFA384X_RID_CNFOWNMACADDR 0xFC01 +#define HFA384X_RID_CNFDESIREDSSID 0xFC02 +#define HFA384X_RID_CNFOWNCHANNEL 0xFC03 +#define HFA384X_RID_CNFOWNSSID 0xFC04 +#define HFA384X_RID_CNFOWNATIMWINDOW 0xFC05 +#define HFA384X_RID_CNFSYSTEMSCALE 0xFC06 +#define HFA384X_RID_CNFMAXDATALEN 0xFC07 +#define HFA384X_RID_CNFWDSADDRESS 0xFC08 +#define HFA384X_RID_CNFPMENABLED 0xFC09 +#define HFA384X_RID_CNFPMEPS 0xFC0A +#define HFA384X_RID_CNFMULTICASTRECEIVE 0xFC0B +#define HFA384X_RID_CNFMAXSLEEPDURATION 0xFC0C +#define HFA384X_RID_CNFPMHOLDOVERDURATION 0xFC0D +#define HFA384X_RID_CNFOWNNAME 0xFC0E +#define HFA384X_RID_CNFOWNDTIMPERIOD 0xFC10 +#define HFA384X_RID_CNFWDSADDRESS1 0xFC11 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS2 0xFC12 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS3 0xFC13 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS4 0xFC14 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS5 0xFC15 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS6 0xFC16 /* AP f/w only */ +#define HFA384X_RID_CNFMULTICASTPMBUFFERING 0xFC17 /* AP f/w only */ +#define HFA384X_RID_UNKNOWN1 0xFC20 +#define HFA384X_RID_UNKNOWN2 0xFC21 +#define HFA384X_RID_CNFWEPDEFAULTKEYID 0xFC23 +#define HFA384X_RID_CNFDEFAULTKEY0 0xFC24 +#define HFA384X_RID_CNFDEFAULTKEY1 0xFC25 +#define HFA384X_RID_CNFDEFAULTKEY2 0xFC26 +#define HFA384X_RID_CNFDEFAULTKEY3 0xFC27 +#define HFA384X_RID_CNFWEPFLAGS 0xFC28 +#define HFA384X_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 +#define HFA384X_RID_CNFAUTHENTICATION 0xFC2A +#define HFA384X_RID_CNFMAXASSOCSTA 0xFC2B /* AP f/w only */ +#define HFA384X_RID_CNFTXCONTROL 0xFC2C +#define HFA384X_RID_CNFROAMINGMODE 0xFC2D +#define HFA384X_RID_CNFHOSTAUTHENTICATION 0xFC2E /* AP f/w only */ +#define HFA384X_RID_CNFRCVCRCERROR 0xFC30 +#define HFA384X_RID_CNFMMLIFE 0xFC31 +#define HFA384X_RID_CNFALTRETRYCOUNT 0xFC32 +#define HFA384X_RID_CNFBEACONINT 0xFC33 +#define HFA384X_RID_CNFAPPCFINFO 0xFC34 /* AP f/w only */ +#define HFA384X_RID_CNFSTAPCFINFO 0xFC35 +#define HFA384X_RID_CNFPRIORITYQUSAGE 0xFC37 +#define HFA384X_RID_CNFTIMCTRL 0xFC40 +#define HFA384X_RID_UNKNOWN3 0xFC41 /* added in STA f/w 0.7.x */ +#define HFA384X_RID_CNFTHIRTY2TALLY 0xFC42 /* added in STA f/w 0.8.0 */ +#define HFA384X_RID_CNFENHSECURITY 0xFC43 /* AP f/w or STA f/w >= 1.6.3 */ +#define HFA384X_RID_CNFDBMADJUST 0xFC46 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_GENERICELEMENT 0xFC48 /* added in STA f/w 1.7.0; + * write only */ +#define HFA384X_RID_PROPAGATIONDELAY 0xFC49 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_GROUPADDRESSES 0xFC80 +#define HFA384X_RID_CREATEIBSS 0xFC81 +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD 0xFC82 +#define HFA384X_RID_RTSTHRESHOLD 0xFC83 +#define HFA384X_RID_TXRATECONTROL 0xFC84 +#define HFA384X_RID_PROMISCUOUSMODE 0xFC85 +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD0 0xFC90 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD1 0xFC91 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD2 0xFC92 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD3 0xFC93 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD4 0xFC94 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD5 0xFC95 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD6 0xFC96 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD0 0xFC97 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD1 0xFC98 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD2 0xFC99 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD3 0xFC9A /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD4 0xFC9B /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD5 0xFC9C /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD6 0xFC9D /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL0 0xFC9E /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL1 0xFC9F /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL2 0xFCA0 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL3 0xFCA1 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL4 0xFCA2 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL5 0xFCA3 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL6 0xFCA4 /* AP f/w only */ +#define HFA384X_RID_CNFSHORTPREAMBLE 0xFCB0 +#define HFA384X_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 +#define HFA384X_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 +#define HFA384X_RID_CNFBASICRATES 0xFCB3 +#define HFA384X_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HFA384X_RID_CNFFALLBACKCTRL 0xFCB5 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_WEPKEYDISABLE 0xFCB6 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_WEPKEYMAPINDEX 0xFCB7 /* ? */ +#define HFA384X_RID_BROADCASTKEYID 0xFCB8 /* ? */ +#define HFA384X_RID_ENTSECFLAGEYID 0xFCB9 /* ? */ +#define HFA384X_RID_CNFPASSIVESCANCTRL 0xFCBA /* added in STA f/w 1.5.0 */ +#define HFA384X_RID_SSNHANDLINGMODE 0xFCBB /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_MDCCONTROL 0xFCBC /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_MDCCOUNTRY 0xFCBD /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_TXPOWERMAX 0xFCBE /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_CNFLFOENABLED 0xFCBF /* added in STA f/w 1.6.3 */ +#define HFA384X_RID_CAPINFO 0xFCC0 /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_LISTENINTERVAL 0xFCC1 /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_SW_ANT_DIV 0xFCC2 /* added in STA f/w 1.7.0; Prism3 */ +#define HFA384X_RID_LED_CTRL 0xFCC4 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_HFODELAY 0xFCC5 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_DISALLOWEDBSSID 0xFCC6 /* added in STA f/w 1.8.0 */ +#define HFA384X_RID_TICKTIME 0xFCE0 +#define HFA384X_RID_SCANREQUEST 0xFCE1 +#define HFA384X_RID_JOINREQUEST 0xFCE2 +#define HFA384X_RID_AUTHENTICATESTATION 0xFCE3 /* AP f/w only */ +#define HFA384X_RID_CHANNELINFOREQUEST 0xFCE4 /* AP f/w only */ +#define HFA384X_RID_HOSTSCAN 0xFCE5 /* added in STA f/w 1.3.1 */ + +/* HFA384X Information RIDs */ +#define HFA384X_RID_MAXLOADTIME 0xFD00 +#define HFA384X_RID_DOWNLOADBUFFER 0xFD01 +#define HFA384X_RID_PRIID 0xFD02 +#define HFA384X_RID_PRISUPRANGE 0xFD03 +#define HFA384X_RID_CFIACTRANGES 0xFD04 +#define HFA384X_RID_NICSERNUM 0xFD0A +#define HFA384X_RID_NICID 0xFD0B +#define HFA384X_RID_MFISUPRANGE 0xFD0C +#define HFA384X_RID_CFISUPRANGE 0xFD0D +#define HFA384X_RID_CHANNELLIST 0xFD10 +#define HFA384X_RID_REGULATORYDOMAINS 0xFD11 +#define HFA384X_RID_TEMPTYPE 0xFD12 +#define HFA384X_RID_CIS 0xFD13 +#define HFA384X_RID_STAID 0xFD20 +#define HFA384X_RID_STASUPRANGE 0xFD21 +#define HFA384X_RID_MFIACTRANGES 0xFD22 +#define HFA384X_RID_CFIACTRANGES2 0xFD23 +#define HFA384X_RID_PRODUCTNAME 0xFD24 /* added in STA f/w 1.3.1; + * only Prism2.5(?) */ +#define HFA384X_RID_PORTSTATUS 0xFD40 +#define HFA384X_RID_CURRENTSSID 0xFD41 +#define HFA384X_RID_CURRENTBSSID 0xFD42 +#define HFA384X_RID_COMMSQUALITY 0xFD43 +#define HFA384X_RID_CURRENTTXRATE 0xFD44 +#define HFA384X_RID_CURRENTBEACONINTERVAL 0xFD45 +#define HFA384X_RID_CURRENTSCALETHRESHOLDS 0xFD46 +#define HFA384X_RID_PROTOCOLRSPTIME 0xFD47 +#define HFA384X_RID_SHORTRETRYLIMIT 0xFD48 +#define HFA384X_RID_LONGRETRYLIMIT 0xFD49 +#define HFA384X_RID_MAXTRANSMITLIFETIME 0xFD4A +#define HFA384X_RID_MAXRECEIVELIFETIME 0xFD4B +#define HFA384X_RID_CFPOLLABLE 0xFD4C +#define HFA384X_RID_AUTHENTICATIONALGORITHMS 0xFD4D +#define HFA384X_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F +#define HFA384X_RID_DBMCOMMSQUALITY 0xFD51 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_CURRENTTXRATE1 0xFD80 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE2 0xFD81 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE3 0xFD82 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE4 0xFD83 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE5 0xFD84 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE6 0xFD85 /* AP f/w only */ +#define HFA384X_RID_OWNMACADDR 0xFD86 /* AP f/w only */ +#define HFA384X_RID_SCANRESULTSTABLE 0xFD88 /* added in STA f/w 0.8.3 */ +#define HFA384X_RID_HOSTSCANRESULTS 0xFD89 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_AUTHENTICATIONUSED 0xFD8A /* added in STA f/w 1.3.4 */ +#define HFA384X_RID_CNFFAASWITCHCTRL 0xFD8B /* added in STA f/w 1.6.3 */ +#define HFA384X_RID_ASSOCIATIONFAILURE 0xFD8D /* added in STA f/w 1.8.0 */ +#define HFA384X_RID_PHYTYPE 0xFDC0 +#define HFA384X_RID_CURRENTCHANNEL 0xFDC1 +#define HFA384X_RID_CURRENTPOWERSTATE 0xFDC2 +#define HFA384X_RID_CCAMODE 0xFDC3 +#define HFA384X_RID_SUPPORTEDDATARATES 0xFDC6 +#define HFA384X_RID_LFO_VOLT_REG_TEST_RES 0xFDC7 /* added in STA f/w 1.7.1 */ +#define HFA384X_RID_BUILDSEQ 0xFFFE +#define HFA384X_RID_FWID 0xFFFF + + +struct hfa384x_comp_ident +{ + u16 id; + u16 variant; + u16 major; + u16 minor; +} __attribute__ ((packed)); + +#define HFA384X_COMP_ID_PRI 0x15 +#define HFA384X_COMP_ID_STA 0x1f +#define HFA384X_COMP_ID_FW_AP 0x14b + +struct hfa384x_sup_range +{ + u16 role; + u16 id; + u16 variant; + u16 bottom; + u16 top; +} __attribute__ ((packed)); + + +struct hfa384x_build_id +{ + u16 pri_seq; + u16 sec_seq; +} __attribute__ ((packed)); + +/* FD01 - Download Buffer */ +struct hfa384x_rid_download_buffer +{ + u16 page; + u16 offset; + u16 length; +} __attribute__ ((packed)); + +/* BSS connection quality (RID FD43 range, RID FD51 dBm-normalized) */ +struct hfa384x_comms_quality { + u16 comm_qual; /* 0 .. 92 */ + u16 signal_level; /* 27 .. 154 */ + u16 noise_level; /* 27 .. 154 */ +} __attribute__ ((packed)); + + +/* netdevice private ioctls (used, e.g., with iwpriv from user space) */ + +/* New wireless extensions API - SET/GET convention (even ioctl numbers are + * root only) + */ +#define PRISM2_IOCTL_PRISM2_PARAM (SIOCIWFIRSTPRIV + 0) +#define PRISM2_IOCTL_GET_PRISM2_PARAM (SIOCIWFIRSTPRIV + 1) +#define PRISM2_IOCTL_WRITEMIF (SIOCIWFIRSTPRIV + 2) +#define PRISM2_IOCTL_READMIF (SIOCIWFIRSTPRIV + 3) +#define PRISM2_IOCTL_MONITOR (SIOCIWFIRSTPRIV + 4) +#define PRISM2_IOCTL_RESET (SIOCIWFIRSTPRIV + 6) +#define PRISM2_IOCTL_INQUIRE (SIOCIWFIRSTPRIV + 8) +#define PRISM2_IOCTL_WDS_ADD (SIOCIWFIRSTPRIV + 10) +#define PRISM2_IOCTL_WDS_DEL (SIOCIWFIRSTPRIV + 12) +#define PRISM2_IOCTL_SET_RID_WORD (SIOCIWFIRSTPRIV + 14) +#define PRISM2_IOCTL_MACCMD (SIOCIWFIRSTPRIV + 16) +#define PRISM2_IOCTL_ADDMAC (SIOCIWFIRSTPRIV + 18) +#define PRISM2_IOCTL_DELMAC (SIOCIWFIRSTPRIV + 20) +#define PRISM2_IOCTL_KICKMAC (SIOCIWFIRSTPRIV + 22) + +/* following are not in SIOCGIWPRIV list; check permission in the driver code + */ +#define PRISM2_IOCTL_DOWNLOAD (SIOCDEVPRIVATE + 13) +#define PRISM2_IOCTL_HOSTAPD (SIOCDEVPRIVATE + 14) + + +/* PRISM2_IOCTL_PRISM2_PARAM ioctl() subtypes: */ +enum { + /* PRISM2_PARAM_PTYPE = 1, */ /* REMOVED 2003-10-22 */ + PRISM2_PARAM_TXRATECTRL = 2, + PRISM2_PARAM_BEACON_INT = 3, + PRISM2_PARAM_PSEUDO_IBSS = 4, + PRISM2_PARAM_ALC = 5, + /* PRISM2_PARAM_TXPOWER = 6, */ /* REMOVED 2003-10-22 */ + PRISM2_PARAM_DUMP = 7, + PRISM2_PARAM_OTHER_AP_POLICY = 8, + PRISM2_PARAM_AP_MAX_INACTIVITY = 9, + PRISM2_PARAM_AP_BRIDGE_PACKETS = 10, + PRISM2_PARAM_DTIM_PERIOD = 11, + PRISM2_PARAM_AP_NULLFUNC_ACK = 12, + PRISM2_PARAM_MAX_WDS = 13, + PRISM2_PARAM_AP_AUTOM_AP_WDS = 14, + PRISM2_PARAM_AP_AUTH_ALGS = 15, + PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16, + PRISM2_PARAM_HOST_ENCRYPT = 17, + PRISM2_PARAM_HOST_DECRYPT = 18, + /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19, REMOVED 2005-08-14 */ + /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20, REMOVED 2005-08-14 */ + PRISM2_PARAM_HOST_ROAMING = 21, + PRISM2_PARAM_BCRX_STA_KEY = 22, + PRISM2_PARAM_IEEE_802_1X = 23, + PRISM2_PARAM_ANTSEL_TX = 24, + PRISM2_PARAM_ANTSEL_RX = 25, + PRISM2_PARAM_MONITOR_TYPE = 26, + PRISM2_PARAM_WDS_TYPE = 27, + PRISM2_PARAM_HOSTSCAN = 28, + PRISM2_PARAM_AP_SCAN = 29, + PRISM2_PARAM_ENH_SEC = 30, + PRISM2_PARAM_IO_DEBUG = 31, + PRISM2_PARAM_BASIC_RATES = 32, + PRISM2_PARAM_OPER_RATES = 33, + PRISM2_PARAM_HOSTAPD = 34, + PRISM2_PARAM_HOSTAPD_STA = 35, + PRISM2_PARAM_WPA = 36, + PRISM2_PARAM_PRIVACY_INVOKED = 37, + PRISM2_PARAM_TKIP_COUNTERMEASURES = 38, + PRISM2_PARAM_DROP_UNENCRYPTED = 39, + PRISM2_PARAM_SCAN_CHANNEL_MASK = 40, +}; + +enum { HOSTAP_ANTSEL_DO_NOT_TOUCH = 0, HOSTAP_ANTSEL_DIVERSITY = 1, + HOSTAP_ANTSEL_LOW = 2, HOSTAP_ANTSEL_HIGH = 3 }; + + +/* PRISM2_IOCTL_MACCMD ioctl() subcommands: */ +enum { AP_MAC_CMD_POLICY_OPEN = 0, AP_MAC_CMD_POLICY_ALLOW = 1, + AP_MAC_CMD_POLICY_DENY = 2, AP_MAC_CMD_FLUSH = 3, + AP_MAC_CMD_KICKALL = 4 }; + + +/* PRISM2_IOCTL_DOWNLOAD ioctl() dl_cmd: */ +enum { + PRISM2_DOWNLOAD_VOLATILE = 1 /* RAM */, + /* Note! Old versions of prism2_srec have a fatal error in CRC-16 + * calculation, which will corrupt all non-volatile downloads. + * PRISM2_DOWNLOAD_NON_VOLATILE used to be 2, but it is now 3 to + * prevent use of old versions of prism2_srec for non-volatile + * download. */ + PRISM2_DOWNLOAD_NON_VOLATILE = 3 /* FLASH */, + PRISM2_DOWNLOAD_VOLATILE_GENESIS = 4 /* RAM in Genesis mode */, + /* Persistent versions of volatile download commands (keep firmware + * data in memory and automatically re-download after hw_reset */ + PRISM2_DOWNLOAD_VOLATILE_PERSISTENT = 5, + PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT = 6, +}; + +struct prism2_download_param { + u32 dl_cmd; + u32 start_addr; + u32 num_areas; + struct prism2_download_area { + u32 addr; /* wlan card address */ + u32 len; + void __user *ptr; /* pointer to data in user space */ + } data[0]; +}; + +#define PRISM2_MAX_DOWNLOAD_AREA_LEN 131072 +#define PRISM2_MAX_DOWNLOAD_LEN 262144 + + +/* PRISM2_IOCTL_HOSTAPD ioctl() cmd: */ +enum { + PRISM2_HOSTAPD_FLUSH = 1, + PRISM2_HOSTAPD_ADD_STA = 2, + PRISM2_HOSTAPD_REMOVE_STA = 3, + PRISM2_HOSTAPD_GET_INFO_STA = 4, + /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */ + PRISM2_SET_ENCRYPTION = 6, + PRISM2_GET_ENCRYPTION = 7, + PRISM2_HOSTAPD_SET_FLAGS_STA = 8, + PRISM2_HOSTAPD_GET_RID = 9, + PRISM2_HOSTAPD_SET_RID = 10, + PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR = 11, + PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12, + PRISM2_HOSTAPD_MLME = 13, + PRISM2_HOSTAPD_SCAN_REQ = 14, + PRISM2_HOSTAPD_STA_CLEAR_STATS = 15, +}; + +#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 +#define PRISM2_HOSTAPD_RID_HDR_LEN \ +((int) (&((struct prism2_hostapd_param *) 0)->u.rid.data)) +#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ +((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) + +/* Maximum length for algorithm names (-1 for nul termination) used in ioctl() + */ +#define HOSTAP_CRYPT_ALG_NAME_LEN 16 + + +struct prism2_hostapd_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u16 aid; + u16 capability; + u8 tx_supp_rates; + } add_sta; + struct { + u32 inactive_sec; + } get_info_sta; + struct { + u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN]; + u32 flags; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + struct { + u32 flags_and; + u32 flags_or; + } set_flags_sta; + struct { + u16 rid; + u16 len; + u8 data[0]; + } rid; + struct { + u8 len; + u8 data[0]; + } generic_elem; + struct { +#define MLME_STA_DEAUTH 0 +#define MLME_STA_DISASSOC 1 + u16 cmd; + u16 reason_code; + } mlme; + struct { + u8 ssid_len; + u8 ssid[32]; + } scan_req; + } u; +}; + +#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT(0) +#define HOSTAP_CRYPT_FLAG_PERMANENT BIT(1) + +#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2 +#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3 +#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4 +#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5 +#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6 +#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7 + + +#endif /* HOSTAP_COMMON_H */ diff --git a/drivers/net/wireless/hostap/hostap_config.h b/drivers/net/wireless/hostap/hostap_config.h new file mode 100644 index 00000000000..7ed3425d08c --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_config.h @@ -0,0 +1,55 @@ +#ifndef HOSTAP_CONFIG_H +#define HOSTAP_CONFIG_H + +#define PRISM2_VERSION "0.4.4-kernel" + +/* In the previous versions of Host AP driver, support for user space version + * of IEEE 802.11 management (hostapd) used to be disabled in the default + * configuration. From now on, support for hostapd is always included and it is + * possible to disable kernel driver version of IEEE 802.11 management with a + * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */ +/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +/* Maximum number of events handler per one interrupt */ +#define PRISM2_MAX_INTERRUPT_EVENTS 20 + +/* Include code for downloading firmware images into volatile RAM. */ +#define PRISM2_DOWNLOAD_SUPPORT + +/* Allow kernel configuration to enable download support. */ +#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE) +#define PRISM2_DOWNLOAD_SUPPORT +#endif + +#ifdef PRISM2_DOWNLOAD_SUPPORT +/* Allow writing firmware images into flash, i.e., to non-volatile storage. + * Before you enable this option, you should make absolutely sure that you are + * using prism2_srec utility that comes with THIS version of the driver! + * In addition, please note that it is possible to kill your card with + * non-volatile download if you are using incorrect image. This feature has not + * been fully tested, so please be careful with it. */ +/* #define PRISM2_NON_VOLATILE_DOWNLOAD */ +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +/* Save low-level I/O for debugging. This should not be enabled in normal use. + */ +/* #define PRISM2_IO_DEBUG */ + +/* Following defines can be used to remove unneeded parts of the driver, e.g., + * to limit the size of the kernel module. Definitions can be added here in + * hostap_config.h or they can be added to make command with EXTRA_CFLAGS, + * e.g., + * 'make pccard EXTRA_CFLAGS="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' + */ + +/* Do not include debug messages into the driver */ +/* #define PRISM2_NO_DEBUG */ + +/* Do not include /proc/net/prism2/wlan#/{registers,debug} */ +/* #define PRISM2_NO_PROCFS_DEBUG */ + +/* Do not include station functionality (i.e., allow only Master (Host AP) mode + */ +/* #define PRISM2_NO_STATION_MODES */ + +#endif /* HOSTAP_CONFIG_H */ diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c new file mode 100644 index 00000000000..faa83badf0a --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -0,0 +1,1030 @@ +#define PRISM2_PCCARD + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/if.h> +#include <linux/wait.h> +#include <linux/timer.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)"; +static dev_info_t dev_info = "hostap_cs"; +static dev_link_t *dev_list = NULL; + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " + "cards (PC Card)."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + + +static int ignore_cis_vcc; +module_param(ignore_cis_vcc, int, 0444); +MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry"); + + +/* struct local_info::hw_priv */ +struct hostap_cs_priv { + dev_node_t node; + dev_link_t *link; + int sandisk_connectplus; +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + outb(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + v = inb(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + outw(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + v = inw(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outsw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); + outsw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline void hfa384x_insw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); + insw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) +#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) + +#else /* PRISM2_IO_DEBUG */ + +#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) +#define HFA384X_INB(a) inb(dev->base_addr + (a)) +#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) +#define HFA384X_INW(a) inw(dev->base_addr + (a)) +#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) +#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_INSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_OUTSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + + + +static void prism2_detach(dev_link_t *link); +static void prism2_release(u_long arg); +static int prism2_event(event_t event, int priority, + event_callback_args_t *args); + + +static int prism2_pccard_card_present(local_info_t *local) +{ + struct hostap_cs_priv *hw_priv = local->hw_priv; + if (hw_priv != NULL && hw_priv->link != NULL && + ((hw_priv->link->state & (DEV_PRESENT | DEV_CONFIG)) == + (DEV_PRESENT | DEV_CONFIG))) + return 1; + return 0; +} + + +/* + * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0 + * Document No. 20-10-00058, January 2004 + * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf + */ +#define SANDISK_WLAN_ACTIVATION_OFF 0x40 +#define SANDISK_HCR_OFF 0x42 + + +static void sandisk_set_iobase(local_info_t *local) +{ + int res; + conf_reg_t reg; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + reg.Function = 0; + reg.Action = CS_WRITE; + reg.Offset = 0x10; /* 0x3f0 IO base 1 */ + reg.Value = hw_priv->link->io.BasePort1 & 0x00ff; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" + " res=%d\n", res); + } + udelay(10); + + reg.Function = 0; + reg.Action = CS_WRITE; + reg.Offset = 0x12; /* 0x3f2 IO base 2 */ + reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" + " res=%d\n", res); + } +} + + +static void sandisk_write_hcr(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + int i; + + HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF); + udelay(50); + for (i = 0; i < 10; i++) { + HFA384X_OUTB(hcr, SANDISK_HCR_OFF); + } + udelay(55); + HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF); +} + + +static int sandisk_enable_wireless(struct net_device *dev) +{ + int res, ret = 0; + conf_reg_t reg; + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + tuple_t tuple; + cisparse_t *parse = NULL; + u_char buf[64]; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (hw_priv->link->io.NumPorts1 < 0x42) { + /* Not enough ports to be SanDisk multi-function card */ + ret = -ENODEV; + goto done; + } + + parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL); + if (parse == NULL) { + ret = -ENOMEM; + goto done; + } + + tuple.DesiredTuple = CISTPL_MANFID; + tuple.Attributes = TUPLE_RETURN_COMMON; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + if (pcmcia_get_first_tuple(hw_priv->link->handle, &tuple) || + pcmcia_get_tuple_data(hw_priv->link->handle, &tuple) || + pcmcia_parse_tuple(hw_priv->link->handle, &tuple, parse) || + parse->manfid.manf != 0xd601 || parse->manfid.card != 0x0101) { + /* No SanDisk manfid found */ + ret = -ENODEV; + goto done; + } + + tuple.DesiredTuple = CISTPL_LONGLINK_MFC; + if (pcmcia_get_first_tuple(hw_priv->link->handle, &tuple) || + pcmcia_get_tuple_data(hw_priv->link->handle, &tuple) || + pcmcia_parse_tuple(hw_priv->link->handle, &tuple, parse) || + parse->longlink_mfc.nfn < 2) { + /* No multi-function links found */ + ret = -ENODEV; + goto done; + } + + printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected" + " - using vendor-specific initialization\n", dev->name); + hw_priv->sandisk_connectplus = 1; + + reg.Function = 0; + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = COR_SOFT_RESET; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", + dev->name, res); + goto done; + } + mdelay(5); + + reg.Function = 0; + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + /* + * Do not enable interrupts here to avoid some bogus events. Interrupts + * will be enabled during the first cor_sreset call. + */ + reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", + dev->name, res); + goto done; + } + mdelay(5); + + sandisk_set_iobase(local); + + HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF); + udelay(10); + HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF); + udelay(10); + +done: + kfree(parse); + return ret; +} + + +static void prism2_pccard_cor_sreset(local_info_t *local) +{ + int res; + conf_reg_t reg; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (!prism2_pccard_card_present(local)) + return; + + reg.Function = 0; + reg.Action = CS_READ; + reg.Offset = CISREG_COR; + reg.Value = 0; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n", + res); + return; + } + printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n", + reg.Value); + + reg.Action = CS_WRITE; + reg.Value |= COR_SOFT_RESET; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n", + res); + return; + } + + mdelay(hw_priv->sandisk_connectplus ? 5 : 2); + + reg.Value &= ~COR_SOFT_RESET; + if (hw_priv->sandisk_connectplus) + reg.Value |= COR_IREQ_ENA; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n", + res); + return; + } + + mdelay(hw_priv->sandisk_connectplus ? 5 : 2); + + if (hw_priv->sandisk_connectplus) + sandisk_set_iobase(local); +} + + +static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) +{ + int res; + conf_reg_t reg; + int old_cor; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (!prism2_pccard_card_present(local)) + return; + + if (hw_priv->sandisk_connectplus) { + sandisk_write_hcr(local, hcr); + return; + } + + reg.Function = 0; + reg.Action = CS_READ; + reg.Offset = CISREG_COR; + reg.Value = 0; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 " + "(%d)\n", res); + return; + } + printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n", + reg.Value); + old_cor = reg.Value; + + reg.Action = CS_WRITE; + reg.Value |= COR_SOFT_RESET; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 " + "(%d)\n", res); + return; + } + + mdelay(10); + + /* Setup Genesis mode */ + reg.Action = CS_WRITE; + reg.Value = hcr; + reg.Offset = CISREG_CCSR; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 " + "(%d)\n", res); + return; + } + mdelay(10); + + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = old_cor & ~COR_SOFT_RESET; + res = pcmcia_access_configuration_register(hw_priv->link->handle, + ®); + if (res != CS_SUCCESS) { + printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 " + "(%d)\n", res); + return; + } + + mdelay(10); +} + + +static int prism2_pccard_dev_open(local_info_t *local) +{ + struct hostap_cs_priv *hw_priv = local->hw_priv; + hw_priv->link->open++; + return 0; +} + + +static int prism2_pccard_dev_close(local_info_t *local) +{ + struct hostap_cs_priv *hw_priv; + + if (local == NULL || local->hw_priv == NULL) + return 1; + hw_priv = local->hw_priv; + if (hw_priv->link == NULL) + return 1; + + if (!hw_priv->link->open) { + printk(KERN_WARNING "%s: prism2_pccard_dev_close(): " + "link not open?!\n", local->dev->name); + return 1; + } + + hw_priv->link->open--; + + return 0; +} + + +static struct prism2_helper_functions prism2_pccard_funcs = +{ + .card_present = prism2_pccard_card_present, + .cor_sreset = prism2_pccard_cor_sreset, + .dev_open = prism2_pccard_dev_open, + .dev_close = prism2_pccard_dev_close, + .genesis_reset = prism2_pccard_genesis_reset, + .hw_type = HOSTAP_HW_PCCARD, +}; + + +/* allocate local data and register with CardServices + * initialize dev_link structure, but do not configure the card yet */ +static dev_link_t *prism2_attach(void) +{ + dev_link_t *link; + client_reg_t client_reg; + int ret; + + link = kmalloc(sizeof(dev_link_t), GFP_KERNEL); + if (link == NULL) + return NULL; + + memset(link, 0, sizeof(dev_link_t)); + + PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); + link->conf.Vcc = 33; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* register with CardServices */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + prism2_detach(link); + return NULL; + } + return link; +} + + +static void prism2_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + PDEBUG(DEBUG_FLOW, "prism2_detach\n"); + + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + if (*linkp == NULL) { + printk(KERN_WARNING "%s: Attempt to detach non-existing " + "PCMCIA client\n", dev_info); + return; + } + + if (link->state & DEV_CONFIG) { + prism2_release((u_long)link); + } + + if (link->handle) { + int res = pcmcia_deregister_client(link->handle); + if (res) { + printk("CardService(DeregisterClient) => %d\n", res); + cs_error(link->handle, DeregisterClient, res); + } + } + + *linkp = link->next; + /* release net devices */ + if (link->priv) { + struct net_device *dev; + struct hostap_interface *iface; + dev = link->priv; + iface = netdev_priv(dev); + kfree(iface->local->hw_priv); + iface->local->hw_priv = NULL; + prism2_free_local_data(dev); + } + kfree(link); +} + + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +#define CFG_CHECK2(fn, retf) \ +do { int ret = (retf); \ +if (ret != 0) { \ + PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \ + cs_error(link->handle, fn, ret); \ + goto next_entry; \ +} \ +} while (0) + + +/* run after a CARD_INSERTION event is received to configure the PCMCIA + * socket and make the device available to the system */ +static int prism2_config(dev_link_t *link) +{ + struct net_device *dev; + struct hostap_interface *iface; + local_info_t *local; + int ret = 1; + tuple_t tuple; + cisparse_t *parse; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cistpl_cftable_entry_t dflt = { 0 }; + struct hostap_cs_priv *hw_priv; + + PDEBUG(DEBUG_FLOW, "prism2_config()\n"); + + parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL); + hw_priv = kmalloc(sizeof(*hw_priv), GFP_KERNEL); + if (parse == NULL || hw_priv == NULL) { + kfree(parse); + kfree(hw_priv); + ret = -ENOMEM; + goto failed; + } + memset(hw_priv, 0, sizeof(*hw_priv)); + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link->handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link->handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(link->handle, &tuple, parse)); + link->conf.ConfigBase = parse->config.base; + link->conf.Present = parse->config.rmask[0]; + + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(link->handle, &conf)); + PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info, + ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc); + link->conf.Vcc = conf.Vcc; + + /* Look for an appropriate configuration table entry in the CIS */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link->handle, &tuple)); + for (;;) { + cistpl_cftable_entry_t *cfg = &(parse->cftable_entry); + CFG_CHECK2(GetTupleData, + pcmcia_get_tuple_data(link->handle, &tuple)); + CFG_CHECK2(ParseTuple, + pcmcia_parse_tuple(link->handle, &tuple, parse)); + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + dflt = *cfg; + if (cfg->index == 0) + goto next_entry; + link->conf.ConfigIndex = cfg->index; + PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " + "(default 0x%02X)\n", cfg->index, dflt.index); + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" + " this entry\n"); + goto next_entry; + } + } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " + "- skipping this entry\n"); + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) { + /* At least Compaq WL200 does not have IRQInfo1 set, + * but it does not work without interrupts.. */ + printk("Config has no IRQ info, but trying to enable " + "IRQ anyway..\n"); + link->conf.Attributes |= CONF_ENABLE_IRQ; + } + + /* IO window settings */ + PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " + "dflt.io.nwin=%d\n", + cfg->io.nwin, dflt.io.nwin); + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " + "io.base=0x%04x, len=%d\n", io->flags, + io->win[0].base, io->win[0].len); + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = io->flags & + CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + CFG_CHECK2(RequestIO, + pcmcia_request_io(link->handle, &link->io)); + + /* This configuration table entry is OK */ + break; + + next_entry: + CS_CHECK(GetNextTuple, + pcmcia_get_next_tuple(link->handle, &tuple)); + } + + /* Need to allocate net_device before requesting IRQ handler */ + dev = prism2_init_local_data(&prism2_pccard_funcs, 0, + &handle_to_dev(link->handle)); + if (dev == NULL) + goto failed; + link->priv = dev; + + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + hw_priv->link = link; + strcpy(hw_priv->node.dev_name, dev->name); + link->dev = &hw_priv->node; + + /* + * Allocate an interrupt line. Note that this does not assign a + * handler to the interrupt, unless the 'Handler' member of the + * irq structure is initialized. + */ + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = prism2_interrupt; + link->irq.Instance = dev; + CS_CHECK(RequestIRQ, + pcmcia_request_irq(link->handle, &link->irq)); + } + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + dev->irq = link->irq.AssignedIRQ; + dev->base_addr = link->io.BasePort1; + + /* Finally, report what we've done */ + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev_info, link->conf.ConfigIndex, + link->conf.Vcc / 10, link->conf.Vcc % 10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1 / 10, + link->conf.Vpp1 % 10); + if (link->conf.Attributes & CONF_ENABLE_IRQ) + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2+link->io.NumPorts2-1); + printk("\n"); + + link->state |= DEV_CONFIG; + link->state &= ~DEV_CONFIG_PENDING; + + local->shutdown = 0; + + sandisk_enable_wireless(dev); + + ret = prism2_hw_config(dev, 1); + if (!ret) { + ret = hostap_hw_ready(dev); + if (ret == 0 && local->ddev) + strcpy(hw_priv->node.dev_name, local->ddev->name); + } + kfree(parse); + return ret; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + + failed: + kfree(parse); + kfree(hw_priv); + prism2_release((u_long)link); + return ret; +} + + +static void prism2_release(u_long arg) +{ + dev_link_t *link = (dev_link_t *)arg; + + PDEBUG(DEBUG_FLOW, "prism2_release\n"); + + if (link->priv) { + struct net_device *dev = link->priv; + struct hostap_interface *iface; + + iface = netdev_priv(dev); + if (link->state & DEV_CONFIG) + prism2_hw_shutdown(dev, 0); + iface->local->shutdown = 1; + } + + if (link->win) + pcmcia_release_window(link->win); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + + link->state &= ~DEV_CONFIG; + + PDEBUG(DEBUG_FLOW, "release - done\n"); +} + + +static int prism2_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = (struct net_device *) link->priv; + + switch (event) { + case CS_EVENT_CARD_INSERTION: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_INSERTION\n", dev_info); + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + if (prism2_config(link)) { + PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n"); + } + break; + + case CS_EVENT_CARD_REMOVAL: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_REMOVAL\n", dev_info); + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + netif_stop_queue(dev); + netif_device_detach(dev); + prism2_release((u_long) link); + } + break; + + case CS_EVENT_PM_SUSPEND: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info); + link->state |= DEV_SUSPEND; + /* fall through */ + + case CS_EVENT_RESET_PHYSICAL: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info); + if (link->state & DEV_CONFIG) { + if (link->open) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + prism2_suspend(dev); + pcmcia_release_configuration(link->handle); + } + break; + + case CS_EVENT_PM_RESUME: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info); + link->state &= ~DEV_SUSPEND; + /* fall through */ + + case CS_EVENT_CARD_RESET: + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_RESET\n", dev_info); + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, + &link->conf); + prism2_hw_shutdown(dev, 1); + prism2_hw_config(dev, link->open ? 0 : 1); + if (link->open) { + netif_device_attach(dev); + netif_start_queue(dev); + } + } + break; + + default: + PDEBUG(DEBUG_EXTRA, "%s: prism2_event() - unknown event %d\n", + dev_info, event); + break; + } + return 0; +} + + +static struct pcmcia_device_id hostap_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b), + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), + PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", + 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID1234( + "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P", + "Eval-RevA", + 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e), + PCMCIA_DEVICE_PROD_ID123( + "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02", + 0xe6ec52ce, 0x08649af2, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", + 0x71b18589, 0xb6f1b0ab, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "Instant Wireless ", " Network PC CARD", "Version 01.02", + 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "SMC", "SMC2632W", "Version 01.02", + 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", + 0x2decece3, 0x82067c18), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", + 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", + 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", + 0x0733cc81, 0x0c52f395), + PCMCIA_DEVICE_PROD_ID12( + "ZoomAir 11Mbps High", "Rate wireless Networking", + 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); + + +static struct pcmcia_driver hostap_driver = { + .drv = { + .name = "hostap_cs", + }, + .attach = prism2_attach, + .detach = prism2_detach, + .owner = THIS_MODULE, + .event = prism2_event, + .id_table = hostap_cs_ids, +}; + +static int __init init_prism2_pccard(void) +{ + printk(KERN_INFO "%s: %s\n", dev_info, version); + return pcmcia_register_driver(&hostap_driver); +} + +static void __exit exit_prism2_pccard(void) +{ + pcmcia_unregister_driver(&hostap_driver); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); +} + + +module_init(init_prism2_pccard); +module_exit(exit_prism2_pccard); diff --git a/drivers/net/wireless/hostap/hostap_download.c b/drivers/net/wireless/hostap/hostap_download.c new file mode 100644 index 00000000000..ab26b52b3e7 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_download.c @@ -0,0 +1,766 @@ +static int prism2_enable_aux_port(struct net_device *dev, int enable) +{ + u16 val, reg; + int i, tries; + unsigned long flags; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + if (enable) { + PDEBUG(DEBUG_EXTRA2, "%s: no PRI f/w - assuming Aux " + "port is already enabled\n", dev->name); + } + return 0; + } + + spin_lock_irqsave(&local->cmdlock, flags); + + /* wait until busy bit is clear */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + spin_unlock_irqrestore(&local->cmdlock, flags); + printk("%s: prism2_enable_aux_port - timeout - reg=0x%04x\n", + dev->name, reg); + return -ETIMEDOUT; + } + + val = HFA384X_INW(HFA384X_CONTROL_OFF); + + if (enable) { + HFA384X_OUTW(HFA384X_AUX_MAGIC0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(HFA384X_AUX_MAGIC1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(HFA384X_AUX_MAGIC2, HFA384X_PARAM2_OFF); + + if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_DISABLED) + printk("prism2_enable_aux_port: was not disabled!?\n"); + val &= ~HFA384X_AUX_PORT_MASK; + val |= HFA384X_AUX_PORT_ENABLE; + } else { + HFA384X_OUTW(0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + + if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_ENABLED) + printk("prism2_enable_aux_port: was not enabled!?\n"); + val &= ~HFA384X_AUX_PORT_MASK; + val |= HFA384X_AUX_PORT_DISABLE; + } + HFA384X_OUTW(val, HFA384X_CONTROL_OFF); + + udelay(5); + + i = 10000; + while (i > 0) { + val = HFA384X_INW(HFA384X_CONTROL_OFF); + val &= HFA384X_AUX_PORT_MASK; + + if ((enable && val == HFA384X_AUX_PORT_ENABLED) || + (!enable && val == HFA384X_AUX_PORT_DISABLED)) + break; + + udelay(10); + i--; + } + + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (i == 0) { + printk("prism2_enable_aux_port(%d) timed out\n", + enable); + return -ETIMEDOUT; + } + + return 0; +} + + +static int hfa384x_from_aux(struct net_device *dev, unsigned int addr, int len, + void *buf) +{ + u16 page, offset; + if (addr & 1 || len & 1) + return -1; + + page = addr >> 7; + offset = addr & 0x7f; + + HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); + HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); + + udelay(5); + +#ifdef PRISM2_PCI + { + u16 *pos = (u16 *) buf; + while (len > 0) { + *pos++ = HFA384X_INW_DATA(HFA384X_AUXDATA_OFF); + len -= 2; + } + } +#else /* PRISM2_PCI */ + HFA384X_INSW(HFA384X_AUXDATA_OFF, buf, len / 2); +#endif /* PRISM2_PCI */ + + return 0; +} + + +static int hfa384x_to_aux(struct net_device *dev, unsigned int addr, int len, + void *buf) +{ + u16 page, offset; + if (addr & 1 || len & 1) + return -1; + + page = addr >> 7; + offset = addr & 0x7f; + + HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); + HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); + + udelay(5); + +#ifdef PRISM2_PCI + { + u16 *pos = (u16 *) buf; + while (len > 0) { + HFA384X_OUTW_DATA(*pos++, HFA384X_AUXDATA_OFF); + len -= 2; + } + } +#else /* PRISM2_PCI */ + HFA384X_OUTSW(HFA384X_AUXDATA_OFF, buf, len / 2); +#endif /* PRISM2_PCI */ + + return 0; +} + + +static int prism2_pda_ok(u8 *buf) +{ + u16 *pda = (u16 *) buf; + int pos; + u16 len, pdr; + + if (buf[0] == 0xff && buf[1] == 0x00 && buf[2] == 0xff && + buf[3] == 0x00) + return 0; + + pos = 0; + while (pos + 1 < PRISM2_PDA_SIZE / 2) { + len = le16_to_cpu(pda[pos]); + pdr = le16_to_cpu(pda[pos + 1]); + if (len == 0 || pos + len > PRISM2_PDA_SIZE / 2) + return 0; + + if (pdr == 0x0000 && len == 2) { + /* PDA end found */ + return 1; + } + + pos += len + 1; + } + + return 0; +} + + +static int prism2_download_aux_dump(struct net_device *dev, + unsigned int addr, int len, u8 *buf) +{ + int res; + + prism2_enable_aux_port(dev, 1); + res = hfa384x_from_aux(dev, addr, len, buf); + prism2_enable_aux_port(dev, 0); + if (res) + return -1; + + return 0; +} + + +static u8 * prism2_read_pda(struct net_device *dev) +{ + u8 *buf; + int res, i, found = 0; +#define NUM_PDA_ADDRS 4 + unsigned int pda_addr[NUM_PDA_ADDRS] = { + 0x7f0000 /* others than HFA3841 */, + 0x3f0000 /* HFA3841 */, + 0x390000 /* apparently used in older cards */, + 0x7f0002 /* Intel PRO/Wireless 2011B (PCI) */, + }; + + buf = (u8 *) kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL); + if (buf == NULL) + return NULL; + + /* Note: wlan card should be in initial state (just after init cmd) + * and no other operations should be performed concurrently. */ + + prism2_enable_aux_port(dev, 1); + + for (i = 0; i < NUM_PDA_ADDRS; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: trying to read PDA from 0x%08x", + dev->name, pda_addr[i]); + res = hfa384x_from_aux(dev, pda_addr[i], PRISM2_PDA_SIZE, buf); + if (res) + continue; + if (res == 0 && prism2_pda_ok(buf)) { + PDEBUG2(DEBUG_EXTRA2, ": OK\n"); + found = 1; + break; + } else { + PDEBUG2(DEBUG_EXTRA2, ": failed\n"); + } + } + + prism2_enable_aux_port(dev, 0); + + if (!found) { + printk(KERN_DEBUG "%s: valid PDA not found\n", dev->name); + kfree(buf); + buf = NULL; + } + + return buf; +} + + +static int prism2_download_volatile(local_info_t *local, + struct prism2_download_data *param) +{ + struct net_device *dev = local->dev; + int ret = 0, i; + u16 param0, param1; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -1; + } + + local->hw_downloading = 1; + if (local->pri_only) { + hfa384x_disable_interrupts(dev); + } else { + prism2_hw_shutdown(dev, 0); + + if (prism2_hw_init(dev, 0)) { + printk(KERN_WARNING "%s: Could not initialize card for" + " download\n", dev->name); + ret = -1; + goto out; + } + } + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_WARNING "%s: Could not enable AUX port\n", + dev->name); + ret = -1; + goto out; + } + + param0 = param->start_addr & 0xffff; + param1 = param->start_addr >> 16; + + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_ENABLE_VOLATILE << 8), + param0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", + dev->name, param->data[i].len, param->data[i].addr); + if (hfa384x_to_aux(dev, param->data[i].addr, + param->data[i].len, param->data[i].data)) { + printk(KERN_WARNING "%s: RAM download at 0x%08x " + "(len=%d) failed\n", dev->name, + param->data[i].addr, param->data[i].len); + ret = -1; + goto out; + } + } + + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + if (hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_DISABLE << 8), param0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + /* ProgMode disable causes the hardware to restart itself from the + * given starting address. Give hw some time and ACK command just in + * case restart did not happen. */ + mdelay(5); + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Disabling AUX port failed\n", + dev->name); + /* continue anyway.. restart should have taken care of this */ + } + + mdelay(5); + local->hw_downloading = 0; + if (prism2_hw_config(dev, 2)) { + printk(KERN_WARNING "%s: Card configuration after RAM " + "download failed\n", dev->name); + ret = -1; + goto out; + } + + out: + local->hw_downloading = 0; + return ret; +} + + +static int prism2_enable_genesis(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + u8 initseq[4] = { 0x00, 0xe1, 0xa1, 0xff }; + u8 readbuf[4]; + + printk(KERN_DEBUG "%s: test Genesis mode with HCR 0x%02x\n", + dev->name, hcr); + local->func->cor_sreset(local); + hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); + local->func->genesis_reset(local, hcr); + + /* Readback test */ + hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); + hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); + hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); + + if (memcmp(initseq, readbuf, sizeof(initseq)) == 0) { + printk(KERN_DEBUG "Readback test succeeded, HCR 0x%02x\n", + hcr); + return 0; + } else { + printk(KERN_DEBUG "Readback test failed, HCR 0x%02x " + "write %02x %02x %02x %02x read %02x %02x %02x %02x\n", + hcr, initseq[0], initseq[1], initseq[2], initseq[3], + readbuf[0], readbuf[1], readbuf[2], readbuf[3]); + return 1; + } +} + + +static int prism2_get_ram_size(local_info_t *local) +{ + int ret; + + /* Try to enable genesis mode; 0x1F for x8 SRAM or 0x0F for x16 SRAM */ + if (prism2_enable_genesis(local, 0x1f) == 0) + ret = 8; + else if (prism2_enable_genesis(local, 0x0f) == 0) + ret = 16; + else + ret = -1; + + /* Disable genesis mode */ + local->func->genesis_reset(local, ret == 16 ? 0x07 : 0x17); + + return ret; +} + + +static int prism2_download_genesis(local_info_t *local, + struct prism2_download_data *param) +{ + struct net_device *dev = local->dev; + int ram16 = 0, i; + int ret = 0; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -EBUSY; + } + + if (!local->func->genesis_reset || !local->func->cor_sreset) { + printk(KERN_INFO "%s: Genesis mode downloading not supported " + "with this hwmodel\n", dev->name); + return -EOPNOTSUPP; + } + + local->hw_downloading = 1; + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_DEBUG "%s: failed to enable AUX port\n", + dev->name); + ret = -EIO; + goto out; + } + + if (local->sram_type == -1) { + /* 0x1F for x8 SRAM or 0x0F for x16 SRAM */ + if (prism2_enable_genesis(local, 0x1f) == 0) { + ram16 = 0; + PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x8 " + "SRAM\n", dev->name); + } else if (prism2_enable_genesis(local, 0x0f) == 0) { + ram16 = 1; + PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x16 " + "SRAM\n", dev->name); + } else { + printk(KERN_DEBUG "%s: Could not initiate genesis " + "mode\n", dev->name); + ret = -EIO; + goto out; + } + } else { + if (prism2_enable_genesis(local, local->sram_type == 8 ? + 0x1f : 0x0f)) { + printk(KERN_DEBUG "%s: Failed to set Genesis " + "mode (sram_type=%d)\n", dev->name, + local->sram_type); + ret = -EIO; + goto out; + } + ram16 = local->sram_type != 8; + } + + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", + dev->name, param->data[i].len, param->data[i].addr); + if (hfa384x_to_aux(dev, param->data[i].addr, + param->data[i].len, param->data[i].data)) { + printk(KERN_WARNING "%s: RAM download at 0x%08x " + "(len=%d) failed\n", dev->name, + param->data[i].addr, param->data[i].len); + ret = -EIO; + goto out; + } + } + + PDEBUG(DEBUG_EXTRA2, "Disable genesis mode\n"); + local->func->genesis_reset(local, ram16 ? 0x07 : 0x17); + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Failed to disable AUX port\n", + dev->name); + } + + mdelay(5); + local->hw_downloading = 0; + + PDEBUG(DEBUG_EXTRA2, "Trying to initialize card\n"); + /* + * Make sure the INIT command does not generate a command completion + * event by disabling interrupts. + */ + hfa384x_disable_interrupts(dev); + if (prism2_hw_init(dev, 1)) { + printk(KERN_DEBUG "%s: Initialization after genesis mode " + "download failed\n", dev->name); + ret = -EIO; + goto out; + } + + PDEBUG(DEBUG_EXTRA2, "Card initialized - running PRI only\n"); + if (prism2_hw_init2(dev, 1)) { + printk(KERN_DEBUG "%s: Initialization(2) after genesis mode " + "download failed\n", dev->name); + ret = -EIO; + goto out; + } + + out: + local->hw_downloading = 0; + return ret; +} + + +#ifdef PRISM2_NON_VOLATILE_DOWNLOAD +/* Note! Non-volatile downloading functionality has not yet been tested + * thoroughly and it may corrupt flash image and effectively kill the card that + * is being updated. You have been warned. */ + +static inline int prism2_download_block(struct net_device *dev, + u32 addr, u8 *data, + u32 bufaddr, int rest_len) +{ + u16 param0, param1; + int block_len; + + block_len = rest_len < 4096 ? rest_len : 4096; + + param0 = addr & 0xffff; + param1 = addr >> 16; + + HFA384X_OUTW(block_len, HFA384X_PARAM2_OFF); + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_ENABLE_NON_VOLATILE << 8), + param0)) { + printk(KERN_WARNING "%s: Flash download command execution " + "failed\n", dev->name); + return -1; + } + + if (hfa384x_to_aux(dev, bufaddr, block_len, data)) { + printk(KERN_WARNING "%s: flash download at 0x%08x " + "(len=%d) failed\n", dev->name, addr, block_len); + return -1; + } + + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_PROGRAM_NON_VOLATILE << 8), + 0)) { + printk(KERN_WARNING "%s: Flash write command execution " + "failed\n", dev->name); + return -1; + } + + return block_len; +} + + +static int prism2_download_nonvolatile(local_info_t *local, + struct prism2_download_data *dl) +{ + struct net_device *dev = local->dev; + int ret = 0, i; + struct { + u16 page; + u16 offset; + u16 len; + } dlbuffer; + u32 bufaddr; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -1; + } + + ret = local->func->get_rid(dev, HFA384X_RID_DOWNLOADBUFFER, + &dlbuffer, 6, 0); + + if (ret < 0) { + printk(KERN_WARNING "%s: Could not read download buffer " + "parameters\n", dev->name); + goto out; + } + + dlbuffer.page = le16_to_cpu(dlbuffer.page); + dlbuffer.offset = le16_to_cpu(dlbuffer.offset); + dlbuffer.len = le16_to_cpu(dlbuffer.len); + + printk(KERN_DEBUG "Download buffer: %d bytes at 0x%04x:0x%04x\n", + dlbuffer.len, dlbuffer.page, dlbuffer.offset); + + bufaddr = (dlbuffer.page << 7) + dlbuffer.offset; + + local->hw_downloading = 1; + + if (!local->pri_only) { + prism2_hw_shutdown(dev, 0); + + if (prism2_hw_init(dev, 0)) { + printk(KERN_WARNING "%s: Could not initialize card for" + " download\n", dev->name); + ret = -1; + goto out; + } + } + + hfa384x_disable_interrupts(dev); + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_WARNING "%s: Could not enable AUX port\n", + dev->name); + ret = -1; + goto out; + } + + printk(KERN_DEBUG "%s: starting flash download\n", dev->name); + for (i = 0; i < dl->num_areas; i++) { + int rest_len = dl->data[i].len; + int data_off = 0; + + while (rest_len > 0) { + int block_len; + + block_len = prism2_download_block( + dev, dl->data[i].addr + data_off, + dl->data[i].data + data_off, bufaddr, + rest_len); + + if (block_len < 0) { + ret = -1; + goto out; + } + + rest_len -= block_len; + data_off += block_len; + } + } + + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_DISABLE << 8), 0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Disabling AUX port failed\n", + dev->name); + /* continue anyway.. restart should have taken care of this */ + } + + mdelay(5); + + local->func->hw_reset(dev); + local->hw_downloading = 0; + if (prism2_hw_config(dev, 2)) { + printk(KERN_WARNING "%s: Card configuration after flash " + "download failed\n", dev->name); + ret = -1; + } else { + printk(KERN_INFO "%s: Card initialized successfully after " + "flash download\n", dev->name); + } + + out: + local->hw_downloading = 0; + return ret; +} +#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ + + +static void prism2_download_free_data(struct prism2_download_data *dl) +{ + int i; + + if (dl == NULL) + return; + + for (i = 0; i < dl->num_areas; i++) + kfree(dl->data[i].data); + kfree(dl); +} + + +static int prism2_download(local_info_t *local, + struct prism2_download_param *param) +{ + int ret = 0; + int i; + u32 total_len = 0; + struct prism2_download_data *dl = NULL; + + printk(KERN_DEBUG "prism2_download: dl_cmd=%d start_addr=0x%08x " + "num_areas=%d\n", + param->dl_cmd, param->start_addr, param->num_areas); + + if (param->num_areas > 100) { + ret = -EINVAL; + goto out; + } + + dl = kmalloc(sizeof(*dl) + param->num_areas * + sizeof(struct prism2_download_data_area), GFP_KERNEL); + if (dl == NULL) { + ret = -ENOMEM; + goto out; + } + memset(dl, 0, sizeof(*dl) + param->num_areas * + sizeof(struct prism2_download_data_area)); + dl->dl_cmd = param->dl_cmd; + dl->start_addr = param->start_addr; + dl->num_areas = param->num_areas; + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, + " area %d: addr=0x%08x len=%d ptr=0x%p\n", + i, param->data[i].addr, param->data[i].len, + param->data[i].ptr); + + dl->data[i].addr = param->data[i].addr; + dl->data[i].len = param->data[i].len; + + total_len += param->data[i].len; + if (param->data[i].len > PRISM2_MAX_DOWNLOAD_AREA_LEN || + total_len > PRISM2_MAX_DOWNLOAD_LEN) { + ret = -E2BIG; + goto out; + } + + dl->data[i].data = kmalloc(dl->data[i].len, GFP_KERNEL); + if (dl->data[i].data == NULL) { + ret = -ENOMEM; + goto out; + } + + if (copy_from_user(dl->data[i].data, param->data[i].ptr, + param->data[i].len)) { + ret = -EFAULT; + goto out; + } + } + + switch (param->dl_cmd) { + case PRISM2_DOWNLOAD_VOLATILE: + case PRISM2_DOWNLOAD_VOLATILE_PERSISTENT: + ret = prism2_download_volatile(local, dl); + break; + case PRISM2_DOWNLOAD_VOLATILE_GENESIS: + case PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT: + ret = prism2_download_genesis(local, dl); + break; + case PRISM2_DOWNLOAD_NON_VOLATILE: +#ifdef PRISM2_NON_VOLATILE_DOWNLOAD + ret = prism2_download_nonvolatile(local, dl); +#else /* PRISM2_NON_VOLATILE_DOWNLOAD */ + printk(KERN_INFO "%s: non-volatile downloading not enabled\n", + local->dev->name); + ret = -EOPNOTSUPP; +#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ + break; + default: + printk(KERN_DEBUG "%s: unsupported download command %d\n", + local->dev->name, param->dl_cmd); + ret = -EINVAL; + break; + }; + + out: + if (ret == 0 && dl && + param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT) { + prism2_download_free_data(local->dl_pri); + local->dl_pri = dl; + } else if (ret == 0 && dl && + param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_PERSISTENT) { + prism2_download_free_data(local->dl_sec); + local->dl_sec = dl; + } else + prism2_download_free_data(dl); + + return ret; +} diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c new file mode 100644 index 00000000000..e533a663ded --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -0,0 +1,3445 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2005, Jouni Malinen <jkmaline@cc.hut.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + * + * FIX: + * - there is currently no way of associating TX packets to correct wds device + * when TX Exc/OK event occurs, so all tx_packets and some + * tx_errors/tx_dropped are added to the main netdevice; using sw_support + * field in txdesc might be used to fix this (using Alloc event to increment + * tx_packets would need some further info in txfid table) + * + * Buffer Access Path (BAP) usage: + * Prism2 cards have two separate BAPs for accessing the card memory. These + * should allow concurrent access to two different frames and the driver + * previously used BAP0 for sending data and BAP1 for receiving data. + * However, there seems to be number of issues with concurrent access and at + * least one know hardware bug in using BAP0 and BAP1 concurrently with PCI + * Prism2.5. Therefore, the driver now only uses BAP0 for moving data between + * host and card memories. BAP0 accesses are protected with local->baplock + * (spin_lock_bh) to prevent concurrent use. + */ + + +#include <linux/config.h> +#include <linux/version.h> + +#include <asm/delay.h> +#include <asm/uaccess.h> + +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/proc_fs.h> +#include <linux/if_arp.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/rtnetlink.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/ieee80211.h> +#include <net/ieee80211_crypt.h> +#include <asm/irq.h> + +#include "hostap_80211.h" +#include "hostap.h" +#include "hostap_ap.h" + + +/* #define final_version */ + +static int mtu = 1500; +module_param(mtu, int, 0444); +MODULE_PARM_DESC(mtu, "Maximum transfer unit"); + +static int channel[MAX_PARM_DEVICES] = { 3, DEF_INTS }; +module_param_array(channel, int, NULL, 0444); +MODULE_PARM_DESC(channel, "Initial channel"); + +static char essid[33] = "test"; +module_param_string(essid, essid, sizeof(essid), 0444); +MODULE_PARM_DESC(essid, "Host AP's ESSID"); + +static int iw_mode[MAX_PARM_DEVICES] = { IW_MODE_MASTER, DEF_INTS }; +module_param_array(iw_mode, int, NULL, 0444); +MODULE_PARM_DESC(iw_mode, "Initial operation mode"); + +static int beacon_int[MAX_PARM_DEVICES] = { 100, DEF_INTS }; +module_param_array(beacon_int, int, NULL, 0444); +MODULE_PARM_DESC(beacon_int, "Beacon interval (1 = 1024 usec)"); + +static int dtim_period[MAX_PARM_DEVICES] = { 1, DEF_INTS }; +module_param_array(dtim_period, int, NULL, 0444); +MODULE_PARM_DESC(dtim_period, "DTIM period"); + +static char dev_template[16] = "wlan%d"; +module_param_string(dev_template, dev_template, sizeof(dev_template), 0444); +MODULE_PARM_DESC(dev_template, "Prefix for network device name (default: " + "wlan%d)"); + +#ifdef final_version +#define EXTRA_EVENTS_WTERR 0 +#else +/* check WTERR events (Wait Time-out) in development versions */ +#define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR +#endif + +/* Events that will be using BAP0 */ +#define HFA384X_BAP0_EVENTS \ + (HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX) + +/* event mask, i.e., events that will result in an interrupt */ +#define HFA384X_EVENT_MASK \ + (HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \ + HFA384X_EV_CMD | HFA384X_EV_TICK | \ + EXTRA_EVENTS_WTERR) + +/* Default TX control flags: use 802.11 headers and request interrupt for + * failed transmits. Frames that request ACK callback, will add + * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy. + */ +#define HFA384X_TX_CTRL_FLAGS \ + (HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX) + + +/* ca. 1 usec */ +#define HFA384X_CMD_BUSY_TIMEOUT 5000 +#define HFA384X_BAP_BUSY_TIMEOUT 50000 + +/* ca. 10 usec */ +#define HFA384X_CMD_COMPL_TIMEOUT 20000 +#define HFA384X_DL_COMPL_TIMEOUT 1000000 + +/* Wait times for initialization; yield to other processes to avoid busy + * waiting for long time. */ +#define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */ +#define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */ + + +static void prism2_hw_reset(struct net_device *dev); +static void prism2_check_sta_fw_version(local_info_t *local); + +#ifdef PRISM2_DOWNLOAD_SUPPORT +/* hostap_download.c */ +static int prism2_download_aux_dump(struct net_device *dev, + unsigned int addr, int len, u8 *buf); +static u8 * prism2_read_pda(struct net_device *dev); +static int prism2_download(local_info_t *local, + struct prism2_download_param *param); +static void prism2_download_free_data(struct prism2_download_data *dl); +static int prism2_download_volatile(local_info_t *local, + struct prism2_download_data *param); +static int prism2_download_genesis(local_info_t *local, + struct prism2_download_data *param); +static int prism2_get_ram_size(local_info_t *local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + + + +#ifndef final_version +/* magic value written to SWSUPPORT0 reg. for detecting whether card is still + * present */ +#define HFA384X_MAGIC 0x8A32 +#endif + + +static u16 hfa384x_read_reg(struct net_device *dev, u16 reg) +{ + return HFA384X_INW(reg); +} + + +static void hfa384x_read_regs(struct net_device *dev, + struct hfa384x_regs *regs) +{ + regs->cmd = HFA384X_INW(HFA384X_CMD_OFF); + regs->evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + regs->offset0 = HFA384X_INW(HFA384X_OFFSET0_OFF); + regs->offset1 = HFA384X_INW(HFA384X_OFFSET1_OFF); + regs->swsupport0 = HFA384X_INW(HFA384X_SWSUPPORT0_OFF); +} + + +/** + * __hostap_cmd_queue_free - Free Prism2 command queue entry (private) + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Internal helper function for freeing Prism2 command queue entries. + * Caller must have acquired local->cmdlock before calling this function. + */ +static inline void __hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + if (del_req) { + entry->del_req = 1; + if (!list_empty(&entry->list)) { + list_del_init(&entry->list); + local->cmd_queue_len--; + } + } + + if (atomic_dec_and_test(&entry->usecnt) && entry->del_req) + kfree(entry); +} + + +/** + * hostap_cmd_queue_free - Free Prism2 command queue entry + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Free a Prism2 command queue entry. + */ +static inline void hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + unsigned long flags; + + spin_lock_irqsave(&local->cmdlock, flags); + __hostap_cmd_queue_free(local, entry, del_req); + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries + * @local: pointer to private Host AP driver data + */ +static void prism2_clear_cmd_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + unsigned long flags; + struct hostap_cmd_queue *entry; + + spin_lock_irqsave(&local->cmdlock, flags); + list_for_each_safe(ptr, n, &local->cmd_queue) { + entry = list_entry(ptr, struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + printk(KERN_DEBUG "%s: removed pending cmd_queue entry " + "(type=%d, cmd=0x%04x, param0=0x%04x)\n", + local->dev->name, entry->type, entry->cmd, + entry->param0); + __hostap_cmd_queue_free(local, entry, 1); + } + if (local->cmd_queue_len) { + /* This should not happen; print debug message and clear + * queue length. */ + printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " + "flush\n", local->dev->name, local->cmd_queue_len); + local->cmd_queue_len = 0; + } + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * hfa384x_cmd_issue - Issue a Prism2 command to the hardware + * @dev: pointer to net_device + * @entry: Prism2 command queue entry to be issued + */ +static inline int hfa384x_cmd_issue(struct net_device *dev, + struct hostap_cmd_queue *entry) +{ + struct hostap_interface *iface; + local_info_t *local; + int tries; + u16 reg; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->card_present && !local->func->card_present(local)) + return -ENODEV; + + if (entry->issued) { + printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", + dev->name, entry); + } + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } +#ifndef final_version + if (tries != HFA384X_CMD_BUSY_TIMEOUT) { + prism2_io_debug_error(dev, 1); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " + "for %d usec\n", dev->name, + HFA384X_CMD_BUSY_TIMEOUT - tries); + } +#endif + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, 2); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + /* write command */ + spin_lock_irqsave(&local->cmdlock, flags); + HFA384X_OUTW(entry->param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(entry->param1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(entry->cmd, HFA384X_CMD_OFF); + entry->issued = 1; + spin_unlock_irqrestore(&local->cmdlock, flags); + + return 0; +} + + +/** + * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @param1: value for Param1 register (pointer; %NULL if not used) + * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed + * + * Issue given command (possibly after waiting in command queue) and sleep + * until the command is completed (or timed out or interrupted). This can be + * called only from user process context. + */ +static int hfa384x_cmd(struct net_device *dev, u16 cmd, u16 param0, + u16 *param1, u16 *resp0) +{ + struct hostap_interface *iface; + local_info_t *local; + int err, res, issue, issued = 0; + unsigned long flags; + struct hostap_cmd_queue *entry; + DECLARE_WAITQUEUE(wait, current); + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt " + "context\n", dev->name); + return -1; + } + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + if (signal_pending(current)) + return -EINTR; + + entry = (struct hostap_cmd_queue *) + kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) { + printk(KERN_DEBUG "%s: hfa384x_cmd - kmalloc failed\n", + dev->name); + return -ENOMEM; + } + memset(entry, 0, sizeof(*entry)); + atomic_set(&entry->usecnt, 1); + entry->type = CMD_SLEEP; + entry->cmd = cmd; + entry->param0 = param0; + if (param1) + entry->param1 = *param1; + init_waitqueue_head(&entry->compl); + + /* prepare to wait for command completion event, but do not sleep yet + */ + add_wait_queue(&entry->compl, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + err = 0; + if (!issue) + goto wait_completion; + + if (signal_pending(current)) + err = -EINTR; + + if (!err) { + if (hfa384x_cmd_issue(dev, entry)) + err = -ETIMEDOUT; + else + issued = 1; + } + + wait_completion: + if (!err && entry->type != CMD_COMPLETED) { + /* sleep until command is completed or timed out */ + res = schedule_timeout(2 * HZ); + } else + res = -1; + + if (!err && signal_pending(current)) + err = -EINTR; + + if (err && issued) { + /* the command was issued, so a CmdCompl event should occur + * soon; however, there's a pending signal and + * schedule_timeout() would be interrupted; wait a short period + * of time to avoid removing entry from the list before + * CmdCompl event */ + udelay(300); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&entry->compl, &wait); + + /* If entry->list is still in the list, it must be removed + * first and in this case prism2_cmd_ev() does not yet have + * local reference to it, and the data can be kfree()'d + * here. If the command completion event is still generated, + * it will be assigned to next (possibly) pending command, but + * the driver will reset the card anyway due to timeout + * + * If the entry is not in the list prism2_cmd_ev() has a local + * reference to it, but keeps cmdlock as long as the data is + * needed, so the data can be kfree()'d here. */ + + /* FIX: if the entry->list is in the list, it has not been completed + * yet, so removing it here is somewhat wrong.. this could cause + * references to freed memory and next list_del() causing NULL pointer + * dereference.. it would probably be better to leave the entry in the + * list and the list should be emptied during hw reset */ + + spin_lock_irqsave(&local->cmdlock, flags); + if (!list_empty(&entry->list)) { + printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " + "(entry=%p, type=%d, res=%d)\n", dev->name, entry, + entry->type, res); + list_del_init(&entry->list); + local->cmd_queue_len--; + } + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (err) { + printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", + dev->name, err); + res = err; + goto done; + } + + if (entry->type != CMD_COMPLETED) { + u16 reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " + "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, " + "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev->name, + res, entry, entry->type, entry->cmd, entry->param0, reg, + HFA384X_INW(HFA384X_INTEN_OFF)); + if (reg & HFA384X_EV_CMD) { + /* Command completion event is pending, but the + * interrupt was not delivered - probably an issue + * with pcmcia-cs configuration. */ + printk(KERN_WARNING "%s: interrupt delivery does not " + "seem to work\n", dev->name); + } + prism2_io_debug_error(dev, 3); + res = -ETIMEDOUT; + goto done; + } + + if (resp0 != NULL) + *resp0 = entry->resp0; +#ifndef final_version + if (entry->res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " + "resp0=0x%04x\n", + dev->name, cmd, entry->res, entry->resp0); + } +#endif /* final_version */ + + res = entry->res; + done: + hostap_cmd_queue_free(local, entry, 1); + return res; +} + + +/** + * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @callback: command completion callback function (%NULL = no callback) + * @context: context data to be given to the callback function + * + * Issue given command (possibly after waiting in command queue) and use + * callback function to indicate command completion. This can be called both + * from user and interrupt context. The callback function will be called in + * hardware IRQ context. It can be %NULL, when no function is called when + * command is completed. + */ +static int hfa384x_cmd_callback(struct net_device *dev, u16 cmd, u16 param0, + void (*callback)(struct net_device *dev, + long context, u16 resp0, + u16 status), + long context) +{ + struct hostap_interface *iface; + local_info_t *local; + int issue, ret; + unsigned long flags; + struct hostap_cmd_queue *entry; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN + 2) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + entry = (struct hostap_cmd_queue *) + kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) { + printk(KERN_DEBUG "%s: hfa384x_cmd_callback - kmalloc " + "failed\n", dev->name); + return -ENOMEM; + } + memset(entry, 0, sizeof(*entry)); + atomic_set(&entry->usecnt, 1); + entry->type = CMD_CALLBACK; + entry->cmd = cmd; + entry->param0 = param0; + entry->callback = callback; + entry->context = context; + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (issue && hfa384x_cmd_issue(dev, entry)) + ret = -ETIMEDOUT; + else + ret = 0; + + hostap_cmd_queue_free(local, entry, ret); + + return ret; +} + + +/** + * __hfa384x_cmd_no_wait - Issue a Prism2 command (private) + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @io_debug_num: I/O debug error number + * + * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait(). + */ +static int __hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, u16 param0, + int io_debug_num) +{ + int tries; + u16 reg; + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, io_debug_num); + printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " + "reg=0x%04x\n", dev->name, io_debug_num, reg); + return -ETIMEDOUT; + } + + /* write command */ + HFA384X_OUTW(param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(cmd, HFA384X_CMD_OFF); + + return 0; +} + + +/** + * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static int hfa384x_cmd_wait(struct net_device *dev, u16 cmd, u16 param0) +{ + int res, tries; + u16 reg; + + res = __hfa384x_cmd_no_wait(dev, cmd, param0, 4); + if (res) + return res; + + /* wait for command completion */ + if ((cmd & HFA384X_CMDCODE_MASK) == HFA384X_CMDCODE_DOWNLOAD) + tries = HFA384X_DL_COMPL_TIMEOUT; + else + tries = HFA384X_CMD_COMPL_TIMEOUT; + + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + tries > 0) { + tries--; + udelay(10); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + prism2_io_debug_error(dev, 5); + printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) | + BIT(8))) >> 8; +#ifndef final_version + if (res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", + dev->name, cmd, res); + } +#endif + + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + return res; +} + + +/** + * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static inline int hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, + u16 param0) +{ + return __hfa384x_cmd_no_wait(dev, cmd, param0, 6); +} + + +/** + * prism2_cmd_ev - Prism2 command completion event handler + * @dev: pointer to net_device + * + * Interrupt handler for command completion events. Called by the main + * interrupt handler in hardware IRQ context. Read Resp0 and status registers + * from the hardware and ACK the event. Depending on the issued command type + * either wake up the sleeping process that is waiting for command completion + * or call the callback function. Issue the next command, if one is pending. + */ +static void prism2_cmd_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hostap_cmd_queue *entry = NULL; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + list_del_init(&entry->list); + local->cmd_queue_len--; + + if (!entry->issued) { + printk(KERN_DEBUG "%s: Command completion event, but " + "cmd not issued\n", dev->name); + __hostap_cmd_queue_free(local, entry, 1); + entry = NULL; + } + } + spin_unlock(&local->cmdlock); + + if (!entry) { + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: Command completion event, but no " + "pending commands\n", dev->name); + return; + } + + entry->resp0 = HFA384X_INW(HFA384X_RESP0_OFF); + entry->res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | + BIT(9) | BIT(8))) >> 8; + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + /* TODO: rest of the CmdEv handling could be moved to tasklet */ + if (entry->type == CMD_SLEEP) { + entry->type = CMD_COMPLETED; + wake_up_interruptible(&entry->compl); + } else if (entry->type == CMD_CALLBACK) { + if (entry->callback) + entry->callback(dev, entry->context, entry->resp0, + entry->res); + } else { + printk(KERN_DEBUG "%s: Invalid command completion type %d\n", + dev->name, entry->type); + } + hostap_cmd_queue_free(local, entry, 1); + + /* issue next command, if pending */ + entry = NULL; + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + if (entry->issuing) { + /* hfa384x_cmd() has already started issuing this + * command, so do not start here */ + entry = NULL; + } + if (entry) + atomic_inc(&entry->usecnt); + } + spin_unlock(&local->cmdlock); + + if (entry) { + /* issue next command; if command issuing fails, remove the + * entry from cmd_queue */ + int res = hfa384x_cmd_issue(dev, entry); + spin_lock(&local->cmdlock); + __hostap_cmd_queue_free(local, entry, res); + spin_unlock(&local->cmdlock); + } +} + + +static inline int hfa384x_wait_offset(struct net_device *dev, u16 o_off) +{ + int tries = HFA384X_BAP_BUSY_TIMEOUT; + int res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + + while (res && tries > 0) { + tries--; + udelay(1); + res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + } + return res; +} + + +/* Offset must be even */ +static int hfa384x_setup_bap(struct net_device *dev, u16 bap, u16 id, + int offset) +{ + u16 o_off, s_off; + int ret = 0; + + if (offset % 2 || bap > 1) + return -EINVAL; + + if (bap == BAP1) { + o_off = HFA384X_OFFSET1_OFF; + s_off = HFA384X_SELECT1_OFF; + } else { + o_off = HFA384X_OFFSET0_OFF; + s_off = HFA384X_SELECT0_OFF; + } + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 7); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } + + HFA384X_OUTW(id, s_off); + HFA384X_OUTW(offset, o_off); + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 8); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } +#ifndef final_version + if (HFA384X_INW(o_off) & HFA384X_OFFSET_ERR) { + prism2_io_debug_error(dev, 9); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " + "(%d,0x04%x,%d); reg=0x%04x\n", + dev->name, bap, id, offset, HFA384X_INW(o_off)); + ret = -EINVAL; + } +#endif + + out: + return ret; +} + + +static int hfa384x_get_rid(struct net_device *dev, u16 rid, void *buf, int len, + int exact_len) +{ + struct hostap_interface *iface; + local_info_t *local; + int res, rlen = 0; + struct hfa384x_rid_hdr rec; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + res = down_interruptible(&local->rid_bap_sem); + if (res) + return res; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS, rid, NULL, NULL); + if (res) { + printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " + "(res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + up(&local->rid_bap_sem); + return res; + } + + spin_lock_bh(&local->baplock); + + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rec, sizeof(rec)); + + if (le16_to_cpu(rec.len) == 0) { + /* RID not available */ + res = -ENODATA; + } + + rlen = (le16_to_cpu(rec.len) - 1) * 2; + if (!res && exact_len && rlen != len) { + printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " + "rid=0x%04x, len=%d (expected %d)\n", + dev->name, rid, rlen, len); + res = -ENODATA; + } + + if (!res) + res = hfa384x_from_bap(dev, BAP0, buf, len); + + spin_unlock_bh(&local->baplock); + up(&local->rid_bap_sem); + + if (res) { + if (res != -ENODATA) + printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " + "len=%d) - failed - res=%d\n", dev->name, rid, + len, res); + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + return res; + } + + return rlen; +} + + +static int hfa384x_set_rid(struct net_device *dev, u16 rid, void *buf, int len) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_rid_hdr rec; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + rec.rid = cpu_to_le16(rid); + /* RID len in words and +1 for rec.rid */ + rec.len = cpu_to_le16(len / 2 + len % 2 + 1); + + res = down_interruptible(&local->rid_bap_sem); + if (res) + return res; + + spin_lock_bh(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_to_bap(dev, BAP0, &rec, sizeof(rec)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, buf, len); + spin_unlock_bh(&local->baplock); + + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " + "failed - res=%d\n", dev->name, rid, len, res); + up(&local->rid_bap_sem); + return res; + } + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS_WRITE, rid, NULL, NULL); + up(&local->rid_bap_sem); + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " + "failed (res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + return res; + } + + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + + return res; +} + + +static void hfa384x_disable_interrupts(struct net_device *dev) +{ + /* disable interrupts and clear event status */ + HFA384X_OUTW(0, HFA384X_INTEN_OFF); + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); +} + + +static void hfa384x_enable_interrupts(struct net_device *dev) +{ + /* ack pending events and enable interrupts from selected events */ + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_no_bap0(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK & ~HFA384X_BAP0_EVENTS, + HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_all(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_only_cmd(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_INTEN_OFF); +} + + +static u16 hfa384x_allocate_fid(struct net_device *dev, int len) +{ + u16 fid; + unsigned long delay; + + /* FIX: this could be replace with hfa384x_cmd() if the Alloc event + * below would be handled like CmdCompl event (sleep here, wake up from + * interrupt handler */ + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_ALLOC, len)) { + printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", + dev->name, len); + return 0xffff; + } + + delay = jiffies + HFA384X_ALLOC_COMPL_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC)) { + printk("%s: fid allocate, len=%d - timeout\n", dev->name, len); + return 0xffff; + } + + fid = HFA384X_INW(HFA384X_ALLOCFID_OFF); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + + return fid; +} + + +static int prism2_reset_port(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (!local->dev_enabled) + return 0; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to disable port\n", + dev->name); + else { + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to enable " + "port\n", dev->name); + } + + /* It looks like at least some STA firmware versions reset + * fragmentation threshold back to 2346 after enable command. Restore + * the configured value, if it differs from this default. */ + if (local->fragm_threshold != 2346 && + hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_DEBUG "%s: failed to restore fragmentation " + "threshold (%d) after Port0 enable\n", + dev->name, local->fragm_threshold); + } + + return res; +} + + +static int prism2_get_version_info(struct net_device *dev, u16 rid, + const char *txt) +{ + struct hfa384x_comp_ident comp; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + /* PRI f/w not yet available - cannot read RIDs */ + return -1; + } + if (hfa384x_get_rid(dev, rid, &comp, sizeof(comp), 1) < 0) { + printk(KERN_DEBUG "Could not get RID for component %s\n", txt); + return -1; + } + + printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt, + __le16_to_cpu(comp.id), __le16_to_cpu(comp.major), + __le16_to_cpu(comp.minor), __le16_to_cpu(comp.variant)); + return 0; +} + + +static int prism2_setup_rids(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 tmp; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + hostap_set_word(dev, HFA384X_RID_TICKTIME, 2000); + + if (!local->fw_ap) { + tmp = hostap_get_porttype(local); + ret = hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, tmp); + if (ret) { + printk("%s: Port type setting to %d failed\n", + dev->name, tmp); + goto fail; + } + } + + /* Setting SSID to empty string seems to kill the card in Host AP mode + */ + if (local->iw_mode != IW_MODE_MASTER || local->essid[0] != '\0') { + ret = hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, + local->essid); + if (ret) { + printk("%s: AP own SSID setting failed\n", dev->name); + goto fail; + } + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFMAXDATALEN, + PRISM2_DATA_MAXLEN); + if (ret) { + printk("%s: MAC data length setting to %d failed\n", + dev->name, PRISM2_DATA_MAXLEN); + goto fail; + } + + if (hfa384x_get_rid(dev, HFA384X_RID_CHANNELLIST, &tmp, 2, 1) < 0) { + printk("%s: Channel list read failed\n", dev->name); + ret = -EINVAL; + goto fail; + } + local->channel_mask = __le16_to_cpu(tmp); + + if (local->channel < 1 || local->channel > 14 || + !(local->channel_mask & (1 << (local->channel - 1)))) { + printk(KERN_WARNING "%s: Channel setting out of range " + "(%d)!\n", dev->name, local->channel); + ret = -EBUSY; + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel); + if (ret) { + printk("%s: Channel setting to %d failed\n", + dev->name, local->channel); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, + local->beacon_int); + if (ret) { + printk("%s: Beacon interval setting to %d failed\n", + dev->name, local->beacon_int); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, + local->dtim_period); + if (ret) { + printk("%s: DTIM period setting to %d failed\n", + dev->name, local->dtim_period); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc); + if (ret) + printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n", + dev->name, local->is_promisc); + + if (!local->fw_ap) { + ret = hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, + local->essid); + if (ret) { + printk("%s: Desired SSID setting failed\n", dev->name); + goto fail; + } + } + + /* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and + * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic + * rates */ + if (local->tx_rate_control == 0) { + local->tx_rate_control = + HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | + HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + } + if (local->basic_rates == 0) + local->basic_rates = HFA384X_RATES_1MBPS | HFA384X_RATES_2MBPS; + + if (!local->fw_ap) { + ret = hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, + local->tx_rate_control); + if (ret) { + printk("%s: TXRateControl setting to %d failed\n", + dev->name, local->tx_rate_control); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, + local->tx_rate_control); + if (ret) { + printk("%s: cnfSupportedRates setting to %d failed\n", + dev->name, local->tx_rate_control); + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + local->basic_rates); + if (ret) { + printk("%s: cnfBasicRates setting to %d failed\n", + dev->name, local->basic_rates); + } + + ret = hostap_set_word(dev, HFA384X_RID_CREATEIBSS, 1); + if (ret) { + printk("%s: Create IBSS setting to 1 failed\n", + dev->name); + } + } + + if (local->name_set) + (void) hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, + local->name); + + if (hostap_set_encryption(local)) { + printk(KERN_INFO "%s: could not configure encryption\n", + dev->name); + } + + (void) hostap_set_antsel(local); + + if (hostap_set_roaming(local)) { + printk(KERN_INFO "%s: could not set host roaming\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,6,3) && + hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, local->enh_sec)) + printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n", + dev->name, local->enh_sec); + + /* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently + * not working correctly (last seven counters report bogus values). + * This has been fixed in 0.8.2, so enable 32-bit tallies only + * beginning with that firmware version. Another bug fix for 32-bit + * tallies in 1.4.0; should 16-bit tallies be used for some other + * versions, too? */ + if (local->sta_fw_ver >= PRISM2_FW_VER(0,8,2)) { + if (hostap_set_word(dev, HFA384X_RID_CNFTHIRTY2TALLY, 1)) { + printk(KERN_INFO "%s: cnfThirty2Tally setting " + "failed\n", dev->name); + local->tallies32 = 0; + } else + local->tallies32 = 1; + } else + local->tallies32 = 0; + + hostap_set_auth_algs(local); + + if (hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_INFO "%s: setting FragmentationThreshold to %d " + "failed\n", dev->name, local->fragm_threshold); + } + + if (hostap_set_word(dev, HFA384X_RID_RTSTHRESHOLD, + local->rts_threshold)) { + printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n", + dev->name, local->rts_threshold); + } + + if (local->manual_retry_count >= 0 && + hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, + local->manual_retry_count)) { + printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n", + dev->name, local->manual_retry_count); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1) && + hfa384x_get_rid(dev, HFA384X_RID_CNFDBMADJUST, &tmp, 2, 1) == 2) { + local->rssi_to_dBm = le16_to_cpu(tmp); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->wpa && + hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1)) { + printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->generic_elem && + hfa384x_set_rid(dev, HFA384X_RID_GENERICELEMENT, + local->generic_elem, local->generic_elem_len)) { + printk(KERN_INFO "%s: setting genericElement failed\n", + dev->name); + } + + fail: + return ret; +} + + +static int prism2_hw_init(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret, first = 1; + unsigned long start, delay; + + PDEBUG(DEBUG_FLOW, "prism2_hw_init()\n"); + + iface = netdev_priv(dev); + local = iface->local; + + clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits); + + init: + /* initialize HFA 384x */ + ret = hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_INIT, 0); + if (ret) { + printk(KERN_INFO "%s: first command failed - assuming card " + "does not have primary firmware\n", dev_info); + } + + if (first && (HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + /* EvStat has Cmd bit set in some cases, so retry once if no + * wait was needed */ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: init command completed too quickly - " + "retrying\n", dev->name); + first = 0; + goto init; + } + + start = jiffies; + delay = jiffies + HFA384X_INIT_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + printk(KERN_DEBUG "%s: assuming no Primary image in " + "flash - card initialization not completed\n", + dev_info); + local->no_pri = 1; +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->sram_type == -1) + local->sram_type = prism2_get_ram_size(local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + return 1; + } + local->no_pri = 0; + printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", + (jiffies - start) * 1000 / HZ); + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + return 0; +} + + +static int prism2_hw_init2(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int i; + + iface = netdev_priv(dev); + local = iface->local; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + kfree(local->pda); + if (local->no_pri) + local->pda = NULL; + else + local->pda = prism2_read_pda(dev); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + hfa384x_disable_interrupts(dev); + +#ifndef final_version + HFA384X_OUTW(HFA384X_MAGIC, HFA384X_SWSUPPORT0_OFF); + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + printk("SWSUPPORT0 write/read failed: %04X != %04X\n", + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), HFA384X_MAGIC); + goto failed; + } +#endif + + if (initial || local->pri_only) { + hfa384x_events_only_cmd(dev); + /* get card version information */ + if (prism2_get_version_info(dev, HFA384X_RID_NICID, "NIC") || + prism2_get_version_info(dev, HFA384X_RID_PRIID, "PRI")) { + hfa384x_disable_interrupts(dev); + goto failed; + } + + if (prism2_get_version_info(dev, HFA384X_RID_STAID, "STA")) { + printk(KERN_DEBUG "%s: Failed to read STA f/w version " + "- only Primary f/w present\n", dev->name); + local->pri_only = 1; + return 0; + } + local->pri_only = 0; + hfa384x_disable_interrupts(dev); + } + + /* FIX: could convert allocate_fid to use sleeping CmdCompl wait and + * enable interrupts before this. This would also require some sort of + * sleeping AllocEv waiting */ + + /* allocate TX FIDs */ + local->txfid_len = PRISM2_TXFID_LEN; + for (i = 0; i < PRISM2_TXFID_COUNT; i++) { + local->txfid[i] = hfa384x_allocate_fid(dev, local->txfid_len); + if (local->txfid[i] == 0xffff && local->txfid_len > 1600) { + local->txfid[i] = hfa384x_allocate_fid(dev, 1600); + if (local->txfid[i] != 0xffff) { + printk(KERN_DEBUG "%s: Using shorter TX FID " + "(1600 bytes)\n", dev->name); + local->txfid_len = 1600; + } + } + if (local->txfid[i] == 0xffff) + goto failed; + local->intransmitfid[i] = PRISM2_TXFID_EMPTY; + } + + hfa384x_events_only_cmd(dev); + + if (initial) { + struct list_head *ptr; + prism2_check_sta_fw_version(local); + + if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR, + &dev->dev_addr, 6, 1) < 0) { + printk("%s: could not get own MAC address\n", + dev->name); + } + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + memcpy(iface->dev->dev_addr, dev->dev_addr, ETH_ALEN); + } + } else if (local->fw_ap) + prism2_check_sta_fw_version(local); + + prism2_setup_rids(dev); + + /* MAC is now configured, but port 0 is not yet enabled */ + return 0; + + failed: + if (!local->no_pri) + printk(KERN_WARNING "%s: Initialization failed\n", dev_info); + return 1; +} + + +static int prism2_hw_enable(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int was_resetting; + + iface = netdev_priv(dev); + local = iface->local; + was_resetting = local->hw_resetting; + + if (hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, NULL)) { + printk("%s: MAC port 0 enabling failed\n", dev->name); + return 1; + } + + local->hw_ready = 1; + local->hw_reset_tries = 0; + local->hw_resetting = 0; + hfa384x_enable_interrupts(dev); + + /* at least D-Link DWL-650 seems to require additional port reset + * before it starts acting as an AP, so reset port automatically + * here just in case */ + if (initial && prism2_reset_port(dev)) { + printk("%s: MAC port 0 reseting failed\n", dev->name); + return 1; + } + + if (was_resetting && netif_queue_stopped(dev)) { + /* If hw_reset() was called during pending transmit, netif + * queue was stopped. Wake it up now since the wlan card has + * been resetted. */ + netif_wake_queue(dev); + } + + return 0; +} + + +static int prism2_hw_config(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->hw_downloading) + return 1; + + if (prism2_hw_init(dev, initial)) { + return local->no_pri ? 0 : 1; + } + + if (prism2_hw_init2(dev, initial)) + return 1; + + /* Enable firmware if secondary image is loaded and at least one of the + * netdevices is up. */ + if (!local->pri_only && + (initial == 0 || (initial == 2 && local->num_dev_open > 0))) { + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + return prism2_hw_enable(dev, initial); + } + + return 0; +} + + +static void prism2_hw_shutdown(struct net_device *dev, int no_disable) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* Allow only command completion events during disable */ + hfa384x_events_only_cmd(dev); + + local->hw_ready = 0; + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + local->dev_enabled = 0; + + if (local->func->card_present && !local->func->card_present(local)) { + printk(KERN_DEBUG "%s: card already removed or not configured " + "during shutdown\n", dev->name); + return; + } + + if ((no_disable & HOSTAP_HW_NO_DISABLE) == 0 && + hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, NULL)) + printk(KERN_WARNING "%s: Shutdown failed\n", dev_info); + + hfa384x_disable_interrupts(dev); + + if (no_disable & HOSTAP_HW_ENABLE_CMDCOMPL) + hfa384x_events_only_cmd(dev); + else + prism2_clear_cmd_queue(local); +} + + +static void prism2_hw_reset(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + +#if 0 + static long last_reset = 0; + + /* do not reset card more than once per second to avoid ending up in a + * busy loop reseting the card */ + if (time_before_eq(jiffies, last_reset + HZ)) + return; + last_reset = jiffies; +#endif + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called " + "in interrupt context\n", dev->name); + return; + } + + if (local->hw_downloading) + return; + + if (local->hw_resetting) { + printk(KERN_WARNING "%s: %s: already resetting card - " + "ignoring reset request\n", dev_info, dev->name); + return; + } + + local->hw_reset_tries++; + if (local->hw_reset_tries > 10) { + printk(KERN_WARNING "%s: too many reset tries, skipping\n", + dev->name); + return; + } + + printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name); + hfa384x_disable_interrupts(dev); + local->hw_resetting = 1; + if (local->func->cor_sreset) { + /* Host system seems to hang in some cases with high traffic + * load or shared interrupts during COR sreset. Disable shared + * interrupts during reset to avoid these crashes. COS sreset + * takes quite a long time, so it is unfortunate that this + * seems to be needed. Anyway, I do not know of any better way + * of avoiding the crash. */ + disable_irq(dev->irq); + local->func->cor_sreset(local); + enable_irq(dev->irq); + } + prism2_hw_shutdown(dev, 1); + prism2_hw_config(dev, 0); + local->hw_resetting = 0; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->dl_pri) { + printk(KERN_DEBUG "%s: persistent download of primary " + "firmware\n", dev->name); + if (prism2_download_genesis(local, local->dl_pri) < 0) + printk(KERN_WARNING "%s: download (PRI) failed\n", + dev->name); + } + + if (local->dl_sec) { + printk(KERN_DEBUG "%s: persistent download of secondary " + "firmware\n", dev->name); + if (prism2_download_volatile(local, local->dl_sec) < 0) + printk(KERN_WARNING "%s: download (SEC) failed\n", + dev->name); + } +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + /* TODO: restore beacon TIM bits for STAs that have buffered frames */ +} + + +static void prism2_schedule_reset(local_info_t *local) +{ + schedule_work(&local->reset_queue); +} + + +/* Called only as scheduled task after noticing card timeout in interrupt + * context */ +static void handle_reset_queue(void *data) +{ + local_info_t *local = (local_info_t *) data; + + printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); + prism2_hw_reset(local->dev); + + if (netif_queue_stopped(local->dev)) { + int i; + + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + if (local->intransmitfid[i] == PRISM2_TXFID_EMPTY) { + PDEBUG(DEBUG_EXTRA, "prism2_tx_timeout: " + "wake up queue\n"); + netif_wake_queue(local->dev); + break; + } + } +} + + +static int prism2_get_txfid_idx(local_info_t *local) +{ + int idx, end; + unsigned long flags; + + spin_lock_irqsave(&local->txfidlock, flags); + end = idx = local->next_txfid; + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + local->intransmitfid[idx] = PRISM2_TXFID_RESERVED; + spin_unlock_irqrestore(&local->txfidlock, flags); + return idx; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != end); + spin_unlock_irqrestore(&local->txfidlock, flags); + + PDEBUG(DEBUG_EXTRA2, "prism2_get_txfid_idx: no room in txfid buf: " + "packet dropped\n"); + local->stats.tx_dropped++; + + return -1; +} + + +/* Called only from hardware IRQ */ +static void prism2_transmit_cb(struct net_device *dev, long context, + u16 resp0, u16 res) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx = (int) context; + + iface = netdev_priv(dev); + local = iface->local; + + if (res) { + printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", + dev->name, res); + return; + } + + if (idx < 0 || idx >= PRISM2_TXFID_COUNT) { + printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " + "idx=%d\n", dev->name, idx); + return; + } + + if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " + "with no pending transmit\n", dev->name); + } + + if (netif_queue_stopped(dev)) { + /* ready for next TX, so wake up queue that was stopped in + * prism2_transmit() */ + netif_wake_queue(dev); + } + + spin_lock(&local->txfidlock); + + /* With reclaim, Resp0 contains new txfid for transmit; the old txfid + * will be automatically allocated for the next TX frame */ + local->intransmitfid[idx] = resp0; + + PDEBUG(DEBUG_FID, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, " + "resp0=0x%04x, transmit_txfid=0x%04x\n", + dev->name, idx, local->txfid[idx], + resp0, local->intransmitfid[local->next_txfid]); + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + local->next_txfid = idx; + + /* check if all TX buffers are occupied */ + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + spin_unlock(&local->txfidlock); + return; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_txfid); + spin_unlock(&local->txfidlock); + + /* no empty TX buffers, stop queue */ + netif_stop_queue(dev); +} + + +/* Called only from software IRQ if PCI bus master is not used (with bus master + * this can be called both from software and hardware IRQ) */ +static int prism2_transmit(struct net_device *dev, int idx) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + /* The driver tries to stop netif queue so that there would not be + * more than one attempt to transmit frames going on; check that this + * is really the case */ + + if (test_and_set_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " + "when previous TX was pending\n", dev->name); + return -1; + } + + /* stop the queue for the time that transmit is pending */ + netif_stop_queue(dev); + + /* transmit packet */ + res = hfa384x_cmd_callback( + dev, + HFA384X_CMDCODE_TRANSMIT | HFA384X_CMD_TX_RECLAIM, + local->txfid[idx], + prism2_transmit_cb, (long) idx); + + if (res) { + struct net_device_stats *stats; + printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " + "failed (res=%d)\n", dev->name, res); + stats = hostap_get_stats(dev); + stats->tx_dropped++; + netif_wake_queue(dev); + return -1; + } + dev->trans_start = jiffies; + + /* Since we did not wait for command completion, the card continues + * to process on the background and we will finish handling when + * command completion event is handled (prism2_cmd_ev() function) */ + + return 0; +} + + +/* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and + * send the payload with this descriptor) */ +/* Called only from software IRQ */ +static int prism2_tx_80211(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_tx_frame txdesc; + struct hostap_skb_tx_data *meta; + int hdr_len, data_len, idx, res, ret = -1; + u16 tx_control, fc; + + iface = netdev_priv(dev); + local = iface->local; + + meta = (struct hostap_skb_tx_data *) skb->cb; + + prism2_callback(local, PRISM2_CALLBACK_TX_START); + + if ((local->func->card_present && !local->func->card_present(local)) || + !local->hw_ready || local->hw_downloading || local->pri_only) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" + " skipping\n", dev->name); + } + goto fail; + } + + memset(&txdesc, 0, sizeof(txdesc)); + + /* skb->data starts with txdesc->frame_control */ + hdr_len = 24; + memcpy(&txdesc.frame_control, skb->data, hdr_len); + fc = le16_to_cpu(txdesc.frame_control); + if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && + (fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS) && + skb->len >= 30) { + /* Addr4 */ + memcpy(txdesc.addr4, skb->data + hdr_len, ETH_ALEN); + hdr_len += ETH_ALEN; + } + + tx_control = local->tx_control; + if (meta->tx_cb_idx) { + tx_control |= HFA384X_TX_CTRL_TX_OK; + txdesc.sw_support = cpu_to_le16(meta->tx_cb_idx); + } + txdesc.tx_control = cpu_to_le16(tx_control); + txdesc.tx_rate = meta->rate; + + data_len = skb->len - hdr_len; + txdesc.data_len = cpu_to_le16(data_len); + txdesc.len = cpu_to_be16(data_len); + + idx = prism2_get_txfid_idx(local); + if (idx < 0) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) + hostap_dump_tx_header(dev->name, &txdesc); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, local->txfid[idx], 0); + + if (!res) + res = hfa384x_to_bap(dev, BAP0, &txdesc, sizeof(txdesc)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, skb->data + hdr_len, + skb->len - hdr_len); + spin_unlock(&local->baplock); + + if (!res) + res = prism2_transmit(dev, idx); + if (res) { + printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", + dev->name); + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + schedule_work(&local->reset_queue); + goto fail; + } + + ret = 0; + +fail: + prism2_callback(local, PRISM2_CALLBACK_TX_END); + return ret; +} + + +/* Some SMP systems have reported number of odd errors with hostap_pci. fid + * register has changed values between consecutive reads for an unknown reason. + * This should really not happen, so more debugging is needed. This test + * version is a big slower, but it will detect most of such register changes + * and will try to get the correct fid eventually. */ +#define EXTRA_FID_READ_TESTS + +static inline u16 prism2_read_fid_reg(struct net_device *dev, u16 reg) +{ +#ifdef EXTRA_FID_READ_TESTS + u16 val, val2, val3; + int i; + + for (i = 0; i < 10; i++) { + val = HFA384X_INW(reg); + val2 = HFA384X_INW(reg); + val3 = HFA384X_INW(reg); + + if (val == val2 && val == val3) + return val; + + printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" + " %04x %04x %04x\n", + dev->name, i, reg, val, val2, val3); + if ((val == val2 || val == val3) && val != 0) + return val; + if (val2 == val3 && val2 != 0) + return val2; + } + printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg " + "%04x (%04x %04x %04x)\n", dev->name, reg, val, val2, val3); + return val; +#else /* EXTRA_FID_READ_TESTS */ + return HFA384X_INW(reg); +#endif /* EXTRA_FID_READ_TESTS */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_rx(local_info_t *local) +{ + struct net_device *dev = local->dev; + int res, rx_pending = 0; + u16 len, hdr_len, rxfid, status, macport; + struct net_device_stats *stats; + struct hfa384x_rx_frame rxdesc; + struct sk_buff *skb = NULL; + + prism2_callback(local, PRISM2_CALLBACK_RX_START); + stats = hostap_get_stats(dev); + + rxfid = prism2_read_fid_reg(dev, HFA384X_RXFID_OFF); +#ifndef final_version + if (rxfid == 0) { + rxfid = HFA384X_INW(HFA384X_RXFID_OFF); + printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", + rxfid); + if (rxfid == 0) { + schedule_work(&local->reset_queue); + goto rx_dropped; + } + /* try to continue with the new rxfid value */ + } +#endif + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rxfid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rxdesc, sizeof(rxdesc)); + + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, + res); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto rx_dropped; + } + + len = le16_to_cpu(rxdesc.data_len); + hdr_len = sizeof(rxdesc); + status = le16_to_cpu(rxdesc.status); + macport = (status >> 8) & 0x07; + + /* Drop frames with too large reported payload length. Monitor mode + * seems to sometimes pass frames (e.g., ctrl::ack) with signed and + * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for + * macport 7 */ + if (len > PRISM2_DATA_MAXLEN + 8 /* WEP */) { + if (macport == 7 && local->iw_mode == IW_MODE_MONITOR) { + if (len >= (u16) -14) { + hdr_len -= 65535 - len; + hdr_len--; + } + len = 0; + } else { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received frame with invalid " + "length 0x%04x\n", dev->name, len); + hostap_dump_rx_header(dev->name, &rxdesc); + goto rx_dropped; + } + } + + skb = dev_alloc_skb(len + hdr_len); + if (!skb) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: RX failed to allocate skb\n", + dev->name); + goto rx_dropped; + } + skb->dev = dev; + memcpy(skb_put(skb, hdr_len), &rxdesc, hdr_len); + + if (len > 0) + res = hfa384x_from_bap(dev, BAP0, skb_put(skb, len), len); + spin_unlock(&local->baplock); + if (res) { + printk(KERN_DEBUG "%s: RX failed to read " + "frame data\n", dev->name); + goto rx_dropped; + } + + skb_queue_tail(&local->rx_list, skb); + tasklet_schedule(&local->rx_tasklet); + + rx_exit: + prism2_callback(local, PRISM2_CALLBACK_RX_END); + if (!rx_pending) { + HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); + } + + return; + + rx_dropped: + stats->rx_dropped++; + if (skb) + dev_kfree_skb(skb); + goto rx_exit; +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_skb(local_info_t *local, struct sk_buff *skb) +{ + struct hfa384x_rx_frame *rxdesc; + struct net_device *dev = skb->dev; + struct hostap_80211_rx_status stats; + int hdrlen, rx_hdrlen; + + rx_hdrlen = sizeof(*rxdesc); + if (skb->len < sizeof(*rxdesc)) { + /* Allow monitor mode to receive shorter frames */ + if (local->iw_mode == IW_MODE_MONITOR && + skb->len >= sizeof(*rxdesc) - 30) { + rx_hdrlen = skb->len; + } else { + dev_kfree_skb(skb); + return; + } + } + + rxdesc = (struct hfa384x_rx_frame *) skb->data; + + if (local->frame_dump & PRISM2_DUMP_RX_HDR && + skb->len >= sizeof(*rxdesc)) + hostap_dump_rx_header(dev->name, rxdesc); + + if (le16_to_cpu(rxdesc->status) & HFA384X_RX_STATUS_FCSERR && + (!local->monitor_allow_fcserr || + local->iw_mode != IW_MODE_MONITOR)) + goto drop; + + if (skb->len > PRISM2_DATA_MAXLEN) { + printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", + dev->name, skb->len, PRISM2_DATA_MAXLEN); + goto drop; + } + + stats.mac_time = le32_to_cpu(rxdesc->time); + stats.signal = rxdesc->signal - local->rssi_to_dBm; + stats.noise = rxdesc->silence - local->rssi_to_dBm; + stats.rate = rxdesc->rate; + + /* Convert Prism2 RX structure into IEEE 802.11 header */ + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(rxdesc->frame_control)); + if (hdrlen > rx_hdrlen) + hdrlen = rx_hdrlen; + + memmove(skb_pull(skb, rx_hdrlen - hdrlen), + &rxdesc->frame_control, hdrlen); + + hostap_80211_rx(dev, skb, &stats); + return; + + drop: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->rx_list)) != NULL) + hostap_rx_skb(local, skb); +} + + +/* Called only from hardware IRQ */ +static void prism2_alloc_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx; + u16 fid; + + iface = netdev_priv(dev); + local = iface->local; + + fid = prism2_read_fid_reg(dev, HFA384X_ALLOCFID_OFF); + + PDEBUG(DEBUG_FID, "FID: interrupt: ALLOC - fid=0x%04x\n", fid); + + spin_lock(&local->txfidlock); + idx = local->next_alloc; + + do { + if (local->txfid[idx] == fid) { + PDEBUG(DEBUG_FID, "FID: found matching txfid[%d]\n", + idx); + +#ifndef final_version + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) + printk("Already released txfid found at idx " + "%d\n", idx); + if (local->intransmitfid[idx] == PRISM2_TXFID_RESERVED) + printk("Already reserved txfid found at idx " + "%d\n", idx); +#endif + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + idx++; + local->next_alloc = idx >= PRISM2_TXFID_COUNT ? 0 : + idx; + + if (!test_bit(HOSTAP_BITS_TRANSMIT, &local->bits) && + netif_queue_stopped(dev)) + netif_wake_queue(dev); + + spin_unlock(&local->txfidlock); + return; + } + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_alloc); + + printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new " + "read 0x%04x) for alloc event\n", dev->name, fid, + HFA384X_INW(HFA384X_ALLOCFID_OFF)); + printk(KERN_DEBUG "TXFIDs:"); + for (idx = 0; idx < PRISM2_TXFID_COUNT; idx++) + printk(" %04x[%04x]", local->txfid[idx], + local->intransmitfid[idx]); + printk("\n"); + spin_unlock(&local->txfidlock); + + /* FIX: should probably schedule reset; reference to one txfid was lost + * completely.. Bad things will happen if we run out of txfids + * Actually, this will cause netdev watchdog to notice TX timeout and + * then card reset after all txfids have been leaked. */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_tx_callback(local_info_t *local, + struct hfa384x_tx_frame *txdesc, int ok, + char *payload) +{ + u16 sw_support, hdrlen, len; + struct sk_buff *skb; + struct hostap_tx_callback_info *cb; + + /* Make sure that frame was from us. */ + if (memcmp(txdesc->addr2, local->dev->dev_addr, ETH_ALEN)) { + printk(KERN_DEBUG "%s: TX callback - foreign frame\n", + local->dev->name); + return; + } + + sw_support = le16_to_cpu(txdesc->sw_support); + + spin_lock(&local->lock); + cb = local->tx_callback; + while (cb != NULL && cb->idx != sw_support) + cb = cb->next; + spin_unlock(&local->lock); + + if (cb == NULL) { + printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", + local->dev->name, sw_support); + return; + } + + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(txdesc->frame_control)); + len = le16_to_cpu(txdesc->data_len); + skb = dev_alloc_skb(hdrlen + len); + if (skb == NULL) { + printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " + "skb\n", local->dev->name); + return; + } + + memcpy(skb_put(skb, hdrlen), (void *) &txdesc->frame_control, hdrlen); + if (payload) + memcpy(skb_put(skb, len), payload, len); + + skb->dev = local->dev; + skb->mac.raw = skb->data; + + cb->func(skb, ok, cb->data); +} + + +/* Called only as a tasklet (software IRQ) */ +static int hostap_tx_compl_read(local_info_t *local, int error, + struct hfa384x_tx_frame *txdesc, + char **payload) +{ + u16 fid, len; + int res, ret = 0; + struct net_device *dev = local->dev; + + fid = prism2_read_fid_reg(dev, HFA384X_TXCOMPLFID_OFF); + + PDEBUG(DEBUG_FID, "interrupt: TX (err=%d) - fid=0x%04x\n", fid, error); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, txdesc, sizeof(*txdesc)); + if (res) { + PDEBUG(DEBUG_EXTRA, "%s: TX (err=%d) - fid=0x%04x - could not " + "read txdesc\n", dev->name, error, fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + ret = -1; + goto fail; + } + if (txdesc->sw_support) { + len = le16_to_cpu(txdesc->data_len); + if (len < PRISM2_DATA_MAXLEN) { + *payload = (char *) kmalloc(len, GFP_ATOMIC); + if (*payload == NULL || + hfa384x_from_bap(dev, BAP0, *payload, len)) { + PDEBUG(DEBUG_EXTRA, "%s: could not read TX " + "frame payload\n", dev->name); + kfree(*payload); + *payload = NULL; + ret = -1; + goto fail; + } + } + } + + fail: + spin_unlock(&local->baplock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_tx_ev(local_info_t *local) +{ + struct net_device *dev = local->dev; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + if (hostap_tx_compl_read(local, 0, &txdesc, &payload)) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) { + PDEBUG(DEBUG_EXTRA, "%s: TX - status=0x%04x " + "retry_count=%d tx_rate=%d seq_ctrl=%d " + "duration_id=%d\n", + dev->name, le16_to_cpu(txdesc.status), + txdesc.retry_count, txdesc.tx_rate, + le16_to_cpu(txdesc.seq_ctrl), + le16_to_cpu(txdesc.duration_id)); + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 1, payload); + kfree(payload); + + fail: + HFA384X_OUTW(HFA384X_EV_TX, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_sta_tx_exc_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->sta_tx_exc_list)) != NULL) { + struct hfa384x_tx_frame *txdesc = + (struct hfa384x_tx_frame *) skb->data; + + if (skb->len >= sizeof(*txdesc)) { + /* Convert Prism2 RX structure into IEEE 802.11 header + */ + u16 fc = le16_to_cpu(txdesc->frame_control); + int hdrlen = hostap_80211_get_hdrlen(fc); + memmove(skb_pull(skb, sizeof(*txdesc) - hdrlen), + &txdesc->frame_control, hdrlen); + + hostap_handle_sta_tx_exc(local, skb); + } + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_txexc(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 status, fc; + int show_dump, res; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + show_dump = local->frame_dump & PRISM2_DUMP_TXEXC_HDR; + local->stats.tx_errors++; + + res = hostap_tx_compl_read(local, 1, &txdesc, &payload); + HFA384X_OUTW(HFA384X_EV_TXEXC, HFA384X_EVACK_OFF); + if (res) + return; + + status = le16_to_cpu(txdesc.status); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + if (status & (HFA384X_TX_STATUS_RETRYERR | HFA384X_TX_STATUS_AGEDERR)) + { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. */ + memcpy(wrqu.addr.sa_data, txdesc.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } else + show_dump = 1; + + if (local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT || + local->wds_type & HOSTAP_WDS_AP_CLIENT) { + struct sk_buff *skb; + skb = dev_alloc_skb(sizeof(txdesc)); + if (skb) { + memcpy(skb_put(skb, sizeof(txdesc)), &txdesc, + sizeof(txdesc)); + skb_queue_tail(&local->sta_tx_exc_list, skb); + tasklet_schedule(&local->sta_tx_exc_tasklet); + } + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 0, payload); + kfree(payload); + + if (!show_dump) + return; + + PDEBUG(DEBUG_EXTRA, "%s: TXEXC - status=0x%04x (%s%s%s%s)" + " tx_control=%04x\n", + dev->name, status, + status & HFA384X_TX_STATUS_RETRYERR ? "[RetryErr]" : "", + status & HFA384X_TX_STATUS_AGEDERR ? "[AgedErr]" : "", + status & HFA384X_TX_STATUS_DISCON ? "[Discon]" : "", + status & HFA384X_TX_STATUS_FORMERR ? "[FormErr]" : "", + le16_to_cpu(txdesc.tx_control)); + + fc = le16_to_cpu(txdesc.frame_control); + PDEBUG(DEBUG_EXTRA, " retry_count=%d tx_rate=%d fc=0x%04x " + "(%s%s%s::%d%s%s)\n", + txdesc.retry_count, txdesc.tx_rate, fc, + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_MGMT ? "Mgmt" : "", + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_CTL ? "Ctrl" : "", + WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA ? "Data" : "", + WLAN_FC_GET_STYPE(fc) >> 4, + fc & IEEE80211_FCTL_TODS ? " ToDS" : "", + fc & IEEE80211_FCTL_FROMDS ? " FromDS" : ""); + PDEBUG(DEBUG_EXTRA, " A1=" MACSTR " A2=" MACSTR " A3=" + MACSTR " A4=" MACSTR "\n", + MAC2STR(txdesc.addr1), MAC2STR(txdesc.addr2), + MAC2STR(txdesc.addr3), MAC2STR(txdesc.addr4)); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_info_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->info_list)) != NULL) { + hostap_info_process(local, skb); + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 fid; + int res, left; + struct hfa384x_info_frame info; + struct sk_buff *skb; + + fid = HFA384X_INW(HFA384X_INFOFID_OFF); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &info, sizeof(info)); + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", + fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto out; + } + + le16_to_cpus(&info.len); + le16_to_cpus(&info.type); + left = (info.len - 1) * 2; + + if (info.len & 0x8000 || info.len == 0 || left > 2060) { + /* data register seems to give 0x8000 in some error cases even + * though busy bit is not set in offset register; + * in addition, length must be at least 1 due to type field */ + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received info frame with invalid " + "length 0x%04x (type 0x%04x)\n", dev->name, info.len, + info.type); + goto out; + } + + skb = dev_alloc_skb(sizeof(info) + left); + if (skb == NULL) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Could not allocate skb for info " + "frame\n", dev->name); + goto out; + } + + memcpy(skb_put(skb, sizeof(info)), &info, sizeof(info)); + if (left > 0 && hfa384x_from_bap(dev, BAP0, skb_put(skb, left), left)) + { + spin_unlock(&local->baplock); + printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, " + "len=0x%04x, type=0x%04x\n", + dev->name, fid, info.len, info.type); + dev_kfree_skb(skb); + goto out; + } + spin_unlock(&local->baplock); + + skb_queue_tail(&local->info_list, skb); + tasklet_schedule(&local->info_tasklet); + + out: + HFA384X_OUTW(HFA384X_EV_INFO, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_bap_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 ev; + int frames = 30; + + if (local->func->card_present && !local->func->card_present(local)) + return; + + set_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Process all pending BAP events without generating new interrupts + * for them */ + while (frames-- > 0) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff || !(ev & HFA384X_BAP0_EVENTS)) + break; + if (ev & HFA384X_EV_RX) + prism2_rx(local); + if (ev & HFA384X_EV_INFO) + prism2_info(local); + if (ev & HFA384X_EV_TX) + prism2_tx_ev(local); + if (ev & HFA384X_EV_TXEXC) + prism2_txexc(local); + } + + set_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); + clear_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Enable interrupts for new BAP events */ + hfa384x_events_all(dev); + clear_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); +} + + +/* Called only from hardware IRQ */ +static void prism2_infdrop(struct net_device *dev) +{ + static unsigned long last_inquire = 0; + + PDEBUG(DEBUG_EXTRA, "%s: INFDROP event\n", dev->name); + + /* some firmware versions seem to get stuck with + * full CommTallies in high traffic load cases; every + * packet will then cause INFDROP event and CommTallies + * info frame will not be sent automatically. Try to + * get out of this state by inquiring CommTallies. */ + if (!last_inquire || time_after(jiffies, last_inquire + HZ)) { + hfa384x_cmd_callback(dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, 0); + last_inquire = jiffies; + } +} + + +/* Called only from hardware IRQ */ +static void prism2_ev_tick(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 evstat, inten; + static int prev_stuck = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (time_after(jiffies, local->last_tick_timer + 5 * HZ) && + local->last_tick_timer) { + evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + inten = HFA384X_INW(HFA384X_INTEN_OFF); + if (!prev_stuck) { + printk(KERN_INFO "%s: SW TICK stuck? " + "bits=0x%lx EvStat=%04x IntEn=%04x\n", + dev->name, local->bits, evstat, inten); + } + local->sw_tick_stuck++; + if ((evstat & HFA384X_BAP0_EVENTS) && + (inten & HFA384X_BAP0_EVENTS)) { + printk(KERN_INFO "%s: trying to recover from IRQ " + "hang\n", dev->name); + hfa384x_events_no_bap0(dev); + } + prev_stuck = 1; + } else + prev_stuck = 0; +} + + +/* Called only from hardware IRQ */ +static inline void prism2_check_magic(local_info_t *local) +{ + /* at least PCI Prism2.5 with bus mastering seems to sometimes + * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the + * register once or twice seems to get the correct value.. PCI cards + * cannot anyway be removed during normal operation, so there is not + * really any need for this verification with them. */ + +#ifndef PRISM2_PCI +#ifndef final_version + static unsigned long last_magic_err = 0; + struct net_device *dev = local->dev; + + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + if (!local->hw_ready) + return; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + if (time_after(jiffies, last_magic_err + 10 * HZ)) { + printk("%s: Interrupt, but SWSUPPORT0 does not match: " + "%04X != %04X - card removed?\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + last_magic_err = jiffies; + } else if (net_ratelimit()) { + printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " + "MAGIC=%04x\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + } + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != 0xffff) + schedule_work(&local->reset_queue); + return; + } +#endif /* final_version */ +#endif /* !PRISM2_PCI */ +} + + +/* Called only from hardware IRQ */ +static irqreturn_t prism2_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct hostap_interface *iface; + local_info_t *local; + int events = 0; + u16 ev; + + iface = netdev_priv(dev); + local = iface->local; + + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + + if (local->func->card_present && !local->func->card_present(local)) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", + dev->name); + } + return IRQ_HANDLED; + } + + prism2_check_magic(local); + + for (;;) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff) { + if (local->shutdown) + return IRQ_HANDLED; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", + dev->name); + return IRQ_HANDLED; + } + + ev &= HFA384X_INW(HFA384X_INTEN_OFF); + if (ev == 0) + break; + + if (ev & HFA384X_EV_CMD) { + prism2_cmd_ev(dev); + } + + /* Above events are needed even before hw is ready, but other + * events should be skipped during initialization. This may + * change for AllocEv if allocate_fid is implemented without + * busy waiting. */ + if (!local->hw_ready || local->hw_resetting || + !local->dev_enabled) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev & HFA384X_EV_CMD) + goto next_event; + if ((ev & HFA384X_EVENT_MASK) == 0) + return IRQ_HANDLED; + if (local->dev_enabled && (ev & ~HFA384X_EV_TICK) && + net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_interrupt: hw " + "not ready; skipping events 0x%04x " + "(IntEn=0x%04x)%s%s%s\n", + dev->name, ev, + HFA384X_INW(HFA384X_INTEN_OFF), + !local->hw_ready ? " (!hw_ready)" : "", + local->hw_resetting ? + " (hw_resetting)" : "", + !local->dev_enabled ? + " (!dev_enabled)" : ""); + } + HFA384X_OUTW(ev, HFA384X_EVACK_OFF); + return IRQ_HANDLED; + } + + if (ev & HFA384X_EV_TICK) { + prism2_ev_tick(dev); + HFA384X_OUTW(HFA384X_EV_TICK, HFA384X_EVACK_OFF); + } + + if (ev & HFA384X_EV_ALLOC) { + prism2_alloc_ev(dev); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + } + + /* Reading data from the card is quite time consuming, so do it + * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed + * and unmasked after needed data has been read completely. */ + if (ev & HFA384X_BAP0_EVENTS) { + hfa384x_events_no_bap0(dev); + tasklet_schedule(&local->bap_tasklet); + } + +#ifndef final_version + if (ev & HFA384X_EV_WTERR) { + PDEBUG(DEBUG_EXTRA, "%s: WTERR event\n", dev->name); + HFA384X_OUTW(HFA384X_EV_WTERR, HFA384X_EVACK_OFF); + } +#endif /* final_version */ + + if (ev & HFA384X_EV_INFDROP) { + prism2_infdrop(dev); + HFA384X_OUTW(HFA384X_EV_INFDROP, HFA384X_EVACK_OFF); + } + + next_event: + events++; + if (events >= PRISM2_MAX_INTERRUPT_EVENTS) { + PDEBUG(DEBUG_EXTRA, "prism2_interrupt: >%d events " + "(EvStat=0x%04x)\n", + PRISM2_MAX_INTERRUPT_EVENTS, + HFA384X_INW(HFA384X_EVSTAT_OFF)); + break; + } + } + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 1); + return IRQ_RETVAL(events); +} + + +static void prism2_check_sta_fw_version(local_info_t *local) +{ + struct hfa384x_comp_ident comp; + int id, variant, major, minor; + + if (hfa384x_get_rid(local->dev, HFA384X_RID_STAID, + &comp, sizeof(comp), 1) < 0) + return; + + local->fw_ap = 0; + id = le16_to_cpu(comp.id); + if (id != HFA384X_COMP_ID_STA) { + if (id == HFA384X_COMP_ID_FW_AP) + local->fw_ap = 1; + return; + } + + major = __le16_to_cpu(comp.major); + minor = __le16_to_cpu(comp.minor); + variant = __le16_to_cpu(comp.variant); + local->sta_fw_ver = PRISM2_FW_VER(major, minor, variant); + + /* Station firmware versions before 1.4.x seem to have a bug in + * firmware-based WEP encryption when using Host AP mode, so use + * host_encrypt as a default for them. Firmware version 1.4.9 is the + * first one that has been seen to produce correct encryption, but the + * bug might be fixed before that (although, at least 1.4.2 is broken). + */ + local->fw_encrypt_ok = local->sta_fw_ver >= PRISM2_FW_VER(1,4,9); + + if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " + "a workaround for firmware bug in Host AP mode WEP\n", + local->dev->name); + local->host_encrypt = 1; + } + + /* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken + * in station firmware versions before 1.5.x. With these versions, the + * driver uses a workaround with bogus frame format (4th address after + * the payload). This is not compatible with other AP devices. Since + * the firmware bug is fixed in the latest station firmware versions, + * automatically enable standard compliant mode for cards using station + * firmware version 1.5.0 or newer. */ + if (local->sta_fw_ver >= PRISM2_FW_VER(1,5,0)) + local->wds_type |= HOSTAP_WDS_STANDARD_FRAME; + else { + printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " + "workaround for firmware bug in Host AP mode WDS\n", + local->dev->name); + } + + hostap_check_sta_fw_version(local->ap, local->sta_fw_ver); +} + + +static void prism2_crypt_deinit_entries(local_info_t *local, int force) +{ + struct list_head *ptr, *n; + struct ieee80211_crypt_data *entry; + + for (ptr = local->crypt_deinit_list.next, n = ptr->next; + ptr != &local->crypt_deinit_list; ptr = n, n = ptr->next) { + entry = list_entry(ptr, struct ieee80211_crypt_data, list); + + if (atomic_read(&entry->refcnt) != 0 && !force) + continue; + + list_del(ptr); + + if (entry->ops) + entry->ops->deinit(entry->priv); + kfree(entry); + } +} + + +static void prism2_crypt_deinit_handler(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + unsigned long flags; + + spin_lock_irqsave(&local->lock, flags); + prism2_crypt_deinit_entries(local, 0); + if (!list_empty(&local->crypt_deinit_list)) { + printk(KERN_DEBUG "%s: entries remaining in delayed crypt " + "deletion list\n", local->dev->name); + local->crypt_deinit_timer.expires = jiffies + HZ; + add_timer(&local->crypt_deinit_timer); + } + spin_unlock_irqrestore(&local->lock, flags); + +} + + +static void hostap_passive_scan(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 channel; + + if (local->passive_scan_interval <= 0) + return; + + if (local->passive_scan_state == PASSIVE_SCAN_LISTEN) { + int max_tries = 16; + + /* Even though host system does not really know when the WLAN + * MAC is sending frames, try to avoid changing channels for + * passive scanning when a host-generated frame is being + * transmitted */ + if (test_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: passive scan detected pending " + "TX - delaying\n", dev->name); + local->passive_scan_timer.expires = jiffies + HZ / 10; + add_timer(&local->passive_scan_timer); + return; + } + + do { + local->passive_scan_channel++; + if (local->passive_scan_channel > 14) + local->passive_scan_channel = 1; + max_tries--; + } while (!(local->channel_mask & + (1 << (local->passive_scan_channel - 1))) && + max_tries > 0); + + if (max_tries == 0) { + printk(KERN_INFO "%s: no allowed passive scan channels" + " found\n", dev->name); + return; + } + + printk(KERN_DEBUG "%s: passive scan channel %d\n", + dev->name, local->passive_scan_channel); + channel = local->passive_scan_channel; + local->passive_scan_state = PASSIVE_SCAN_WAIT; + local->passive_scan_timer.expires = jiffies + HZ / 10; + } else { + channel = local->channel; + local->passive_scan_state = PASSIVE_SCAN_LISTEN; + local->passive_scan_timer.expires = jiffies + + local->passive_scan_interval * HZ; + } + + if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CHANGE_CHANNEL << 8), + channel, NULL, 0)) + printk(KERN_ERR "%s: passive scan channel set %d " + "failed\n", dev->name, channel); + + add_timer(&local->passive_scan_timer); +} + + +/* Called only as a scheduled task when communications quality values should + * be updated. */ +static void handle_comms_qual_update(void *data) +{ + local_info_t *local = data; + prism2_update_comms_qual(local->dev); +} + + +/* Software watchdog - called as a timer. Hardware interrupt (Tick event) is + * used to monitor that local->last_tick_timer is being updated. If not, + * interrupt busy-loop is assumed and driver tries to recover by masking out + * some events. */ +static void hostap_tick_timer(unsigned long data) +{ + static unsigned long last_inquire = 0; + local_info_t *local = (local_info_t *) data; + local->last_tick_timer = jiffies; + + /* Inquire CommTallies every 10 seconds to keep the statistics updated + * more often during low load and when using 32-bit tallies. */ + if ((!last_inquire || time_after(jiffies, last_inquire + 10 * HZ)) && + !local->hw_downloading && local->hw_ready && + !local->hw_resetting && local->dev_enabled) { + hfa384x_cmd_callback(local->dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, 0); + last_inquire = jiffies; + } + + if ((local->last_comms_qual_update == 0 || + time_after(jiffies, local->last_comms_qual_update + 10 * HZ)) && + (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC)) { + schedule_work(&local->comms_qual_update); + } + + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); +} + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int prism2_registers_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + + if (off != 0) { + *eof = 1; + return 0; + } + +#define SHOW_REG(n) \ +p += sprintf(p, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF)) + + SHOW_REG(CMD); + SHOW_REG(PARAM0); + SHOW_REG(PARAM1); + SHOW_REG(PARAM2); + SHOW_REG(STATUS); + SHOW_REG(RESP0); + SHOW_REG(RESP1); + SHOW_REG(RESP2); + SHOW_REG(INFOFID); + SHOW_REG(CONTROL); + SHOW_REG(SELECT0); + SHOW_REG(SELECT1); + SHOW_REG(OFFSET0); + SHOW_REG(OFFSET1); + SHOW_REG(RXFID); + SHOW_REG(ALLOCFID); + SHOW_REG(TXCOMPLFID); + SHOW_REG(SWSUPPORT0); + SHOW_REG(SWSUPPORT1); + SHOW_REG(SWSUPPORT2); + SHOW_REG(EVSTAT); + SHOW_REG(INTEN); + SHOW_REG(EVACK); + /* Do not read data registers, because they change the state of the + * MAC (offset += 2) */ + /* SHOW_REG(DATA0); */ + /* SHOW_REG(DATA1); */ + SHOW_REG(AUXPAGE); + SHOW_REG(AUXOFFSET); + /* SHOW_REG(AUXDATA); */ +#ifdef PRISM2_PCI + SHOW_REG(PCICOR); + SHOW_REG(PCIHCR); + SHOW_REG(PCI_M0_ADDRH); + SHOW_REG(PCI_M0_ADDRL); + SHOW_REG(PCI_M0_LEN); + SHOW_REG(PCI_M0_CTL); + SHOW_REG(PCI_STATUS); + SHOW_REG(PCI_M1_ADDRH); + SHOW_REG(PCI_M1_ADDRL); + SHOW_REG(PCI_M1_LEN); + SHOW_REG(PCI_M1_CTL); +#endif /* PRISM2_PCI */ + + return (p - page); +} +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +struct set_tim_data { + struct list_head list; + int aid; + int set; +}; + +static int prism2_set_tim(struct net_device *dev, int aid, int set) +{ + struct list_head *ptr; + struct set_tim_data *new_entry; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + new_entry = (struct set_tim_data *) + kmalloc(sizeof(*new_entry), GFP_ATOMIC); + if (new_entry == NULL) { + printk(KERN_DEBUG "%s: prism2_set_tim: kmalloc failed\n", + local->dev->name); + return -ENOMEM; + } + memset(new_entry, 0, sizeof(*new_entry)); + new_entry->aid = aid; + new_entry->set = set; + + spin_lock_bh(&local->set_tim_lock); + list_for_each(ptr, &local->set_tim_list) { + struct set_tim_data *entry = + list_entry(ptr, struct set_tim_data, list); + if (entry->aid == aid) { + PDEBUG(DEBUG_PS2, "%s: prism2_set_tim: aid=%d " + "set=%d ==> %d\n", + local->dev->name, aid, entry->set, set); + entry->set = set; + kfree(new_entry); + new_entry = NULL; + break; + } + } + if (new_entry) + list_add_tail(&new_entry->list, &local->set_tim_list); + spin_unlock_bh(&local->set_tim_lock); + + schedule_work(&local->set_tim_queue); + + return 0; +} + + +static void handle_set_tim_queue(void *data) +{ + local_info_t *local = (local_info_t *) data; + struct set_tim_data *entry; + u16 val; + + for (;;) { + entry = NULL; + spin_lock_bh(&local->set_tim_lock); + if (!list_empty(&local->set_tim_list)) { + entry = list_entry(local->set_tim_list.next, + struct set_tim_data, list); + list_del(&entry->list); + } + spin_unlock_bh(&local->set_tim_lock); + if (!entry) + break; + + PDEBUG(DEBUG_PS2, "%s: handle_set_tim_queue: aid=%d set=%d\n", + local->dev->name, entry->aid, entry->set); + + val = entry->aid; + if (entry->set) + val |= 0x8000; + if (hostap_set_word(local->dev, HFA384X_RID_CNFTIMCTRL, val)) { + printk(KERN_DEBUG "%s: set_tim failed (aid=%d " + "set=%d)\n", + local->dev->name, entry->aid, entry->set); + } + + kfree(entry); + } +} + + +static void prism2_clear_set_tim_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + + list_for_each_safe(ptr, n, &local->set_tim_list) { + struct set_tim_data *entry; + entry = list_entry(ptr, struct set_tim_data, list); + list_del(&entry->list); + kfree(entry); + } +} + + +static struct net_device * +prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, + struct device *sdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct local_info *local; + int len, i, ret; + + if (funcs == NULL) + return NULL; + + len = strlen(dev_template); + if (len >= IFNAMSIZ || strstr(dev_template, "%d") == NULL) { + printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n", + dev_template); + return NULL; + } + + len = sizeof(struct hostap_interface) + + 3 + sizeof(struct local_info) + + 3 + sizeof(struct ap_data); + + dev = alloc_etherdev(len); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + local = (struct local_info *) ((((long) (iface + 1)) + 3) & ~3); + local->ap = (struct ap_data *) ((((long) (local + 1)) + 3) & ~3); + local->dev = iface->dev = dev; + iface->local = local; + iface->type = HOSTAP_INTERFACE_MASTER; + INIT_LIST_HEAD(&local->hostap_interfaces); + + local->hw_module = THIS_MODULE; + +#ifdef PRISM2_IO_DEBUG + local->io_debug_enabled = 1; +#endif /* PRISM2_IO_DEBUG */ + + local->func = funcs; + local->func->cmd = hfa384x_cmd; + local->func->read_regs = hfa384x_read_regs; + local->func->get_rid = hfa384x_get_rid; + local->func->set_rid = hfa384x_set_rid; + local->func->hw_enable = prism2_hw_enable; + local->func->hw_config = prism2_hw_config; + local->func->hw_reset = prism2_hw_reset; + local->func->hw_shutdown = prism2_hw_shutdown; + local->func->reset_port = prism2_reset_port; + local->func->schedule_reset = prism2_schedule_reset; +#ifdef PRISM2_DOWNLOAD_SUPPORT + local->func->read_aux = prism2_download_aux_dump; + local->func->download = prism2_download; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + local->func->tx = prism2_tx_80211; + local->func->set_tim = prism2_set_tim; + local->func->need_tx_headroom = 0; /* no need to add txdesc in + * skb->data (FIX: maybe for DMA bus + * mastering? */ + + local->mtu = mtu; + + rwlock_init(&local->iface_lock); + spin_lock_init(&local->txfidlock); + spin_lock_init(&local->cmdlock); + spin_lock_init(&local->baplock); + spin_lock_init(&local->lock); + init_MUTEX(&local->rid_bap_sem); + + if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) + card_idx = 0; + local->card_idx = card_idx; + + len = strlen(essid); + memcpy(local->essid, essid, + len > MAX_SSID_LEN ? MAX_SSID_LEN : len); + local->essid[MAX_SSID_LEN] = '\0'; + i = GET_INT_PARM(iw_mode, card_idx); + if ((i >= IW_MODE_ADHOC && i <= IW_MODE_REPEAT) || + i == IW_MODE_MONITOR) { + local->iw_mode = i; + } else { + printk(KERN_WARNING "prism2: Unknown iw_mode %d; using " + "IW_MODE_MASTER\n", i); + local->iw_mode = IW_MODE_MASTER; + } + local->channel = GET_INT_PARM(channel, card_idx); + local->beacon_int = GET_INT_PARM(beacon_int, card_idx); + local->dtim_period = GET_INT_PARM(dtim_period, card_idx); + local->wds_max_connections = 16; + local->tx_control = HFA384X_TX_CTRL_FLAGS; + local->manual_retry_count = -1; + local->rts_threshold = 2347; + local->fragm_threshold = 2346; + local->rssi_to_dBm = 100; /* default; to be overriden by + * cnfDbmAdjust, if available */ + local->auth_algs = PRISM2_AUTH_OPEN | PRISM2_AUTH_SHARED_KEY; + local->sram_type = -1; + local->scan_channel_mask = 0xffff; + + /* Initialize task queue structures */ + INIT_WORK(&local->reset_queue, handle_reset_queue, local); + INIT_WORK(&local->set_multicast_list_queue, + hostap_set_multicast_list_queue, local->dev); + + INIT_WORK(&local->set_tim_queue, handle_set_tim_queue, local); + INIT_LIST_HEAD(&local->set_tim_list); + spin_lock_init(&local->set_tim_lock); + + INIT_WORK(&local->comms_qual_update, handle_comms_qual_update, local); + + /* Initialize tasklets for handling hardware IRQ related operations + * outside hw IRQ handler */ +#define HOSTAP_TASKLET_INIT(q, f, d) \ +do { memset((q), 0, sizeof(*(q))); (q)->func = (f); (q)->data = (d); } \ +while (0) + HOSTAP_TASKLET_INIT(&local->bap_tasklet, hostap_bap_tasklet, + (unsigned long) local); + + HOSTAP_TASKLET_INIT(&local->info_tasklet, hostap_info_tasklet, + (unsigned long) local); + hostap_info_init(local); + + HOSTAP_TASKLET_INIT(&local->rx_tasklet, + hostap_rx_tasklet, (unsigned long) local); + skb_queue_head_init(&local->rx_list); + + HOSTAP_TASKLET_INIT(&local->sta_tx_exc_tasklet, + hostap_sta_tx_exc_tasklet, (unsigned long) local); + skb_queue_head_init(&local->sta_tx_exc_list); + + INIT_LIST_HEAD(&local->cmd_queue); + init_waitqueue_head(&local->hostscan_wq); + INIT_LIST_HEAD(&local->crypt_deinit_list); + init_timer(&local->crypt_deinit_timer); + local->crypt_deinit_timer.data = (unsigned long) local; + local->crypt_deinit_timer.function = prism2_crypt_deinit_handler; + + init_timer(&local->passive_scan_timer); + local->passive_scan_timer.data = (unsigned long) local; + local->passive_scan_timer.function = hostap_passive_scan; + + init_timer(&local->tick_timer); + local->tick_timer.data = (unsigned long) local; + local->tick_timer.function = hostap_tick_timer; + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); + + INIT_LIST_HEAD(&local->bss_list); + + hostap_setup_dev(dev, local, 1); + local->saved_eth_header_parse = dev->hard_header_parse; + + dev->hard_start_xmit = hostap_master_start_xmit; + dev->type = ARPHRD_IEEE80211; + dev->hard_header_parse = hostap_80211_header_parse; + + rtnl_lock(); + ret = dev_alloc_name(dev, "wifi%d"); + SET_NETDEV_DEV(dev, sdev); + if (ret >= 0) + ret = register_netdevice(dev); + rtnl_unlock(); + if (ret < 0) { + printk(KERN_WARNING "%s: register netdevice failed!\n", + dev_info); + goto fail; + } + printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name); + +#ifndef PRISM2_NO_PROCFS_DEBUG + create_proc_read_entry("registers", 0, local->proc, + prism2_registers_proc_read, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + hostap_init_data(local); + return dev; + + fail: + free_netdev(dev); + return NULL; +} + + +static int hostap_hw_ready(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + + iface = netdev_priv(dev); + local = iface->local; + local->ddev = hostap_add_interface(local, HOSTAP_INTERFACE_MAIN, 0, + "", dev_template); + + if (local->ddev) { + if (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC) { + netif_carrier_off(local->dev); + netif_carrier_off(local->ddev); + } + hostap_init_proc(local); + hostap_init_ap_proc(local); + return 0; + } + + return -1; +} + + +static void prism2_free_local_data(struct net_device *dev) +{ + struct hostap_tx_callback_info *tx_cb, *tx_cb_prev; + int i; + struct hostap_interface *iface; + struct local_info *local; + struct list_head *ptr, *n; + + if (dev == NULL) + return; + + iface = netdev_priv(dev); + local = iface->local; + + flush_scheduled_work(); + + if (timer_pending(&local->crypt_deinit_timer)) + del_timer(&local->crypt_deinit_timer); + prism2_crypt_deinit_entries(local, 1); + + if (timer_pending(&local->passive_scan_timer)) + del_timer(&local->passive_scan_timer); + + if (timer_pending(&local->tick_timer)) + del_timer(&local->tick_timer); + + prism2_clear_cmd_queue(local); + + skb_queue_purge(&local->info_list); + skb_queue_purge(&local->rx_list); + skb_queue_purge(&local->sta_tx_exc_list); + + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + + for (i = 0; i < WEP_KEYS; i++) { + struct ieee80211_crypt_data *crypt = local->crypt[i]; + if (crypt) { + if (crypt->ops) + crypt->ops->deinit(crypt->priv); + kfree(crypt); + local->crypt[i] = NULL; + } + } + + if (local->ap != NULL) + hostap_free_data(local->ap); + +#ifndef PRISM2_NO_PROCFS_DEBUG + if (local->proc != NULL) + remove_proc_entry("registers", local->proc); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + hostap_remove_proc(local); + + tx_cb = local->tx_callback; + while (tx_cb != NULL) { + tx_cb_prev = tx_cb; + tx_cb = tx_cb->next; + kfree(tx_cb_prev); + } + + hostap_set_hostapd(local, 0, 0); + hostap_set_hostapd_sta(local, 0, 0); + + for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { + if (local->frag_cache[i].skb != NULL) + dev_kfree_skb(local->frag_cache[i].skb); + } + +#ifdef PRISM2_DOWNLOAD_SUPPORT + prism2_download_free_data(local->dl_pri); + prism2_download_free_data(local->dl_sec); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + list_for_each_safe(ptr, n, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_MASTER) { + /* special handling for this interface below */ + continue; + } + hostap_remove_interface(iface->dev, 0, 1); + } + + prism2_clear_set_tim_queue(local); + + list_for_each_safe(ptr, n, &local->bss_list) { + struct hostap_bss_info *bss = + list_entry(ptr, struct hostap_bss_info, list); + kfree(bss); + } + + kfree(local->pda); + kfree(local->last_scan_results); + kfree(local->generic_elem); + + unregister_netdev(local->dev); + free_netdev(local->dev); +} + + +#ifndef PRISM2_PLX +static void prism2_suspend(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + union iwreq_data wrqu; + + iface = dev->priv; + local = iface->local; + + /* Send disconnect event, e.g., to trigger reassociation after resume + * if wpa_supplicant is used. */ + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + + /* Disable hardware and firmware */ + prism2_hw_shutdown(dev, 0); +} +#endif /* PRISM2_PLX */ + + +/* These might at some point be compiled separately and used as separate + * kernel modules or linked into one */ +#ifdef PRISM2_DOWNLOAD_SUPPORT +#include "hostap_download.c" +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +#ifdef PRISM2_CALLBACK +/* External hostap_callback.c file can be used to, e.g., blink activity led. + * This can use platform specific code and must define prism2_callback() + * function (if PRISM2_CALLBACK is not defined, these function calls are not + * used. */ +#include "hostap_callback.c" +#endif /* PRISM2_CALLBACK */ diff --git a/drivers/net/wireless/hostap/hostap_info.c b/drivers/net/wireless/hostap/hostap_info.c new file mode 100644 index 00000000000..5aa998fdf1c --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_info.c @@ -0,0 +1,499 @@ +/* Host AP driver Info Frame processing (part of hostap.o module) */ + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies16(local_info_t *local, unsigned char *buf, + int left) +{ + struct hfa384x_comm_tallies *tallies; + + if (left < sizeof(struct hfa384x_comm_tallies)) { + printk(KERN_DEBUG "%s: too short (len=%d) commtallies " + "info frame\n", local->dev->name, left); + return; + } + + tallies = (struct hfa384x_comm_tallies *) buf; +#define ADD_COMM_TALLIES(name) \ +local->comm_tallies.name += le16_to_cpu(tallies->name) + ADD_COMM_TALLIES(tx_unicast_frames); + ADD_COMM_TALLIES(tx_multicast_frames); + ADD_COMM_TALLIES(tx_fragments); + ADD_COMM_TALLIES(tx_unicast_octets); + ADD_COMM_TALLIES(tx_multicast_octets); + ADD_COMM_TALLIES(tx_deferred_transmissions); + ADD_COMM_TALLIES(tx_single_retry_frames); + ADD_COMM_TALLIES(tx_multiple_retry_frames); + ADD_COMM_TALLIES(tx_retry_limit_exceeded); + ADD_COMM_TALLIES(tx_discards); + ADD_COMM_TALLIES(rx_unicast_frames); + ADD_COMM_TALLIES(rx_multicast_frames); + ADD_COMM_TALLIES(rx_fragments); + ADD_COMM_TALLIES(rx_unicast_octets); + ADD_COMM_TALLIES(rx_multicast_octets); + ADD_COMM_TALLIES(rx_fcs_errors); + ADD_COMM_TALLIES(rx_discards_no_buffer); + ADD_COMM_TALLIES(tx_discards_wrong_sa); + ADD_COMM_TALLIES(rx_discards_wep_undecryptable); + ADD_COMM_TALLIES(rx_message_in_msg_fragments); + ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); +#undef ADD_COMM_TALLIES +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies32(local_info_t *local, unsigned char *buf, + int left) +{ + struct hfa384x_comm_tallies32 *tallies; + + if (left < sizeof(struct hfa384x_comm_tallies32)) { + printk(KERN_DEBUG "%s: too short (len=%d) commtallies32 " + "info frame\n", local->dev->name, left); + return; + } + + tallies = (struct hfa384x_comm_tallies32 *) buf; +#define ADD_COMM_TALLIES(name) \ +local->comm_tallies.name += le32_to_cpu(tallies->name) + ADD_COMM_TALLIES(tx_unicast_frames); + ADD_COMM_TALLIES(tx_multicast_frames); + ADD_COMM_TALLIES(tx_fragments); + ADD_COMM_TALLIES(tx_unicast_octets); + ADD_COMM_TALLIES(tx_multicast_octets); + ADD_COMM_TALLIES(tx_deferred_transmissions); + ADD_COMM_TALLIES(tx_single_retry_frames); + ADD_COMM_TALLIES(tx_multiple_retry_frames); + ADD_COMM_TALLIES(tx_retry_limit_exceeded); + ADD_COMM_TALLIES(tx_discards); + ADD_COMM_TALLIES(rx_unicast_frames); + ADD_COMM_TALLIES(rx_multicast_frames); + ADD_COMM_TALLIES(rx_fragments); + ADD_COMM_TALLIES(rx_unicast_octets); + ADD_COMM_TALLIES(rx_multicast_octets); + ADD_COMM_TALLIES(rx_fcs_errors); + ADD_COMM_TALLIES(rx_discards_no_buffer); + ADD_COMM_TALLIES(tx_discards_wrong_sa); + ADD_COMM_TALLIES(rx_discards_wep_undecryptable); + ADD_COMM_TALLIES(rx_message_in_msg_fragments); + ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); +#undef ADD_COMM_TALLIES +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies(local_info_t *local, unsigned char *buf, + int left) +{ + if (local->tallies32) + prism2_info_commtallies32(local, buf, left); + else + prism2_info_commtallies16(local, buf, left); +} + + +#ifndef PRISM2_NO_STATION_MODES +#ifndef PRISM2_NO_DEBUG +static const char* hfa384x_linkstatus_str(u16 linkstatus) +{ + switch (linkstatus) { + case HFA384X_LINKSTATUS_CONNECTED: + return "Connected"; + case HFA384X_LINKSTATUS_DISCONNECTED: + return "Disconnected"; + case HFA384X_LINKSTATUS_AP_CHANGE: + return "Access point change"; + case HFA384X_LINKSTATUS_AP_OUT_OF_RANGE: + return "Access point out of range"; + case HFA384X_LINKSTATUS_AP_IN_RANGE: + return "Access point in range"; + case HFA384X_LINKSTATUS_ASSOC_FAILED: + return "Association failed"; + default: + return "Unknown"; + } +} +#endif /* PRISM2_NO_DEBUG */ + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_linkstatus(local_info_t *local, unsigned char *buf, + int left) +{ + u16 val; + int non_sta_mode; + + /* Alloc new JoinRequests to occur since LinkStatus for the previous + * has been received */ + local->last_join_time = 0; + + if (left != 2) { + printk(KERN_DEBUG "%s: invalid linkstatus info frame " + "length %d\n", local->dev->name, left); + return; + } + + non_sta_mode = local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT || + local->iw_mode == IW_MODE_MONITOR; + + val = buf[0] | (buf[1] << 8); + if (!non_sta_mode || val != HFA384X_LINKSTATUS_DISCONNECTED) { + PDEBUG(DEBUG_EXTRA, "%s: LinkStatus=%d (%s)\n", + local->dev->name, val, hfa384x_linkstatus_str(val)); + } + + if (non_sta_mode) { + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + return; + } + + /* Get current BSSID later in scheduled task */ + set_bit(PRISM2_INFO_PENDING_LINKSTATUS, &local->pending_info); + local->prev_link_status = val; + schedule_work(&local->info_queue); +} + + +static void prism2_host_roaming(local_info_t *local) +{ + struct hfa384x_join_request req; + struct net_device *dev = local->dev; + struct hfa384x_hostscan_result *selected, *entry; + int i; + unsigned long flags; + + if (local->last_join_time && + time_before(jiffies, local->last_join_time + 10 * HZ)) { + PDEBUG(DEBUG_EXTRA, "%s: last join request has not yet been " + "completed - waiting for it before issuing new one\n", + dev->name); + return; + } + + /* ScanResults are sorted: first ESS results in decreasing signal + * quality then IBSS results in similar order. + * Trivial roaming policy: just select the first entry. + * This could probably be improved by adding hysteresis to limit + * number of handoffs, etc. + * + * Could do periodic RID_SCANREQUEST or Inquire F101 to get new + * ScanResults */ + spin_lock_irqsave(&local->lock, flags); + if (local->last_scan_results == NULL || + local->last_scan_results_count == 0) { + spin_unlock_irqrestore(&local->lock, flags); + PDEBUG(DEBUG_EXTRA, "%s: no scan results for host roaming\n", + dev->name); + return; + } + + selected = &local->last_scan_results[0]; + + if (local->preferred_ap[0] || local->preferred_ap[1] || + local->preferred_ap[2] || local->preferred_ap[3] || + local->preferred_ap[4] || local->preferred_ap[5]) { + /* Try to find preferred AP */ + PDEBUG(DEBUG_EXTRA, "%s: Preferred AP BSSID " MACSTR "\n", + dev->name, MAC2STR(local->preferred_ap)); + for (i = 0; i < local->last_scan_results_count; i++) { + entry = &local->last_scan_results[i]; + if (memcmp(local->preferred_ap, entry->bssid, 6) == 0) + { + PDEBUG(DEBUG_EXTRA, "%s: using preferred AP " + "selection\n", dev->name); + selected = entry; + break; + } + } + } + + memcpy(req.bssid, selected->bssid, 6); + req.channel = selected->chid; + spin_unlock_irqrestore(&local->lock, flags); + + PDEBUG(DEBUG_EXTRA, "%s: JoinRequest: BSSID=" MACSTR " channel=%d\n", + dev->name, MAC2STR(req.bssid), le16_to_cpu(req.channel)); + if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, + sizeof(req))) { + printk(KERN_DEBUG "%s: JoinRequest failed\n", dev->name); + } + local->last_join_time = jiffies; +} + + +static void hostap_report_scan_complete(local_info_t *local) +{ + union iwreq_data wrqu; + + /* Inform user space about new scan results (just empty event, + * SIOCGIWSCAN can be used to fetch data */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(local->dev, SIOCGIWSCAN, &wrqu, NULL); + + /* Allow SIOCGIWSCAN handling to occur since we have received + * scanning result */ + local->scan_timestamp = 0; +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_scanresults(local_info_t *local, unsigned char *buf, + int left) +{ + u16 *pos; + int new_count, i; + unsigned long flags; + struct hfa384x_scan_result *res; + struct hfa384x_hostscan_result *results, *prev; + + if (left < 4) { + printk(KERN_DEBUG "%s: invalid scanresult info frame " + "length %d\n", local->dev->name, left); + return; + } + + pos = (u16 *) buf; + pos++; + pos++; + left -= 4; + + new_count = left / sizeof(struct hfa384x_scan_result); + results = kmalloc(new_count * sizeof(struct hfa384x_hostscan_result), + GFP_ATOMIC); + if (results == NULL) + return; + + /* Convert to hostscan result format. */ + res = (struct hfa384x_scan_result *) pos; + for (i = 0; i < new_count; i++) { + memcpy(&results[i], &res[i], + sizeof(struct hfa384x_scan_result)); + results[i].atim = 0; + } + + spin_lock_irqsave(&local->lock, flags); + local->last_scan_type = PRISM2_SCAN; + prev = local->last_scan_results; + local->last_scan_results = results; + local->last_scan_results_count = new_count; + spin_unlock_irqrestore(&local->lock, flags); + kfree(prev); + + hostap_report_scan_complete(local); + + /* Perform rest of ScanResults handling later in scheduled task */ + set_bit(PRISM2_INFO_PENDING_SCANRESULTS, &local->pending_info); + schedule_work(&local->info_queue); +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_hostscanresults(local_info_t *local, + unsigned char *buf, int left) +{ + int i, result_size, copy_len, new_count; + struct hfa384x_hostscan_result *results, *prev; + unsigned long flags; + u16 *pos; + u8 *ptr; + + wake_up_interruptible(&local->hostscan_wq); + + if (left < 4) { + printk(KERN_DEBUG "%s: invalid hostscanresult info frame " + "length %d\n", local->dev->name, left); + return; + } + + pos = (u16 *) buf; + copy_len = result_size = le16_to_cpu(*pos); + if (result_size == 0) { + printk(KERN_DEBUG "%s: invalid result_size (0) in " + "hostscanresults\n", local->dev->name); + return; + } + if (copy_len > sizeof(struct hfa384x_hostscan_result)) + copy_len = sizeof(struct hfa384x_hostscan_result); + + pos++; + pos++; + left -= 4; + ptr = (u8 *) pos; + + new_count = left / result_size; + results = kmalloc(new_count * sizeof(struct hfa384x_hostscan_result), + GFP_ATOMIC); + if (results == NULL) + return; + memset(results, 0, new_count * sizeof(struct hfa384x_hostscan_result)); + + for (i = 0; i < new_count; i++) { + memcpy(&results[i], ptr, copy_len); + ptr += result_size; + left -= result_size; + } + + if (left) { + printk(KERN_DEBUG "%s: short HostScan result entry (%d/%d)\n", + local->dev->name, left, result_size); + } + + spin_lock_irqsave(&local->lock, flags); + local->last_scan_type = PRISM2_HOSTSCAN; + prev = local->last_scan_results; + local->last_scan_results = results; + local->last_scan_results_count = new_count; + spin_unlock_irqrestore(&local->lock, flags); + kfree(prev); + + hostap_report_scan_complete(local); +} +#endif /* PRISM2_NO_STATION_MODES */ + + +/* Called only as a tasklet (software IRQ) */ +void hostap_info_process(local_info_t *local, struct sk_buff *skb) +{ + struct hfa384x_info_frame *info; + unsigned char *buf; + int left; +#ifndef PRISM2_NO_DEBUG + int i; +#endif /* PRISM2_NO_DEBUG */ + + info = (struct hfa384x_info_frame *) skb->data; + buf = skb->data + sizeof(*info); + left = skb->len - sizeof(*info); + + switch (info->type) { + case HFA384X_INFO_COMMTALLIES: + prism2_info_commtallies(local, buf, left); + break; + +#ifndef PRISM2_NO_STATION_MODES + case HFA384X_INFO_LINKSTATUS: + prism2_info_linkstatus(local, buf, left); + break; + + case HFA384X_INFO_SCANRESULTS: + prism2_info_scanresults(local, buf, left); + break; + + case HFA384X_INFO_HOSTSCANRESULTS: + prism2_info_hostscanresults(local, buf, left); + break; +#endif /* PRISM2_NO_STATION_MODES */ + +#ifndef PRISM2_NO_DEBUG + default: + PDEBUG(DEBUG_EXTRA, "%s: INFO - len=%d type=0x%04x\n", + local->dev->name, info->len, info->type); + PDEBUG(DEBUG_EXTRA, "Unknown info frame:"); + for (i = 0; i < (left < 100 ? left : 100); i++) + PDEBUG2(DEBUG_EXTRA, " %02x", buf[i]); + PDEBUG2(DEBUG_EXTRA, "\n"); + break; +#endif /* PRISM2_NO_DEBUG */ + } +} + + +#ifndef PRISM2_NO_STATION_MODES +static void handle_info_queue_linkstatus(local_info_t *local) +{ + int val = local->prev_link_status; + int connected; + union iwreq_data wrqu; + + connected = + val == HFA384X_LINKSTATUS_CONNECTED || + val == HFA384X_LINKSTATUS_AP_CHANGE || + val == HFA384X_LINKSTATUS_AP_IN_RANGE; + + if (local->func->get_rid(local->dev, HFA384X_RID_CURRENTBSSID, + local->bssid, ETH_ALEN, 1) < 0) { + printk(KERN_DEBUG "%s: could not read CURRENTBSSID after " + "LinkStatus event\n", local->dev->name); + } else { + PDEBUG(DEBUG_EXTRA, "%s: LinkStatus: BSSID=" MACSTR "\n", + local->dev->name, + MAC2STR((unsigned char *) local->bssid)); + if (local->wds_type & HOSTAP_WDS_AP_CLIENT) + hostap_add_sta(local->ap, local->bssid); + } + + /* Get BSSID if we have a valid AP address */ + if (connected) { + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + memcpy(wrqu.ap_addr.sa_data, local->bssid, ETH_ALEN); + } else { + netif_carrier_off(local->dev); + netif_carrier_off(local->ddev); + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + } + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* + * Filter out sequential disconnect events in order not to cause a + * flood of SIOCGIWAP events that have a race condition with EAPOL + * frames and can confuse wpa_supplicant about the current association + * status. + */ + if (connected || local->prev_linkstatus_connected) + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + local->prev_linkstatus_connected = connected; +} + + +static void handle_info_queue_scanresults(local_info_t *local) +{ + if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) + prism2_host_roaming(local); + + if (local->host_roaming == 2 && local->iw_mode == IW_MODE_INFRA && + memcmp(local->preferred_ap, "\x00\x00\x00\x00\x00\x00", + ETH_ALEN) != 0) { + /* + * Firmware seems to be getting into odd state in host_roaming + * mode 2 when hostscan is used without join command, so try + * to fix this by re-joining the current AP. This does not + * actually trigger a new association if the current AP is + * still in the scan results. + */ + prism2_host_roaming(local); + } +} + + +/* Called only as scheduled task after receiving info frames (used to avoid + * pending too much time in HW IRQ handler). */ +static void handle_info_queue(void *data) +{ + local_info_t *local = (local_info_t *) data; + + if (test_and_clear_bit(PRISM2_INFO_PENDING_LINKSTATUS, + &local->pending_info)) + handle_info_queue_linkstatus(local); + + if (test_and_clear_bit(PRISM2_INFO_PENDING_SCANRESULTS, + &local->pending_info)) + handle_info_queue_scanresults(local); +} +#endif /* PRISM2_NO_STATION_MODES */ + + +void hostap_info_init(local_info_t *local) +{ + skb_queue_head_init(&local->info_list); +#ifndef PRISM2_NO_STATION_MODES + INIT_WORK(&local->info_queue, handle_info_queue, local); +#endif /* PRISM2_NO_STATION_MODES */ +} + + +EXPORT_SYMBOL(hostap_info_init); +EXPORT_SYMBOL(hostap_info_process); diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c new file mode 100644 index 00000000000..e720369a351 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -0,0 +1,4102 @@ +/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ + +#ifdef in_atomic +/* Get kernel_locked() for in_atomic() */ +#include <linux/smp_lock.h> +#endif +#include <linux/ethtool.h> + + +static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct iw_statistics *wstats; + + iface = netdev_priv(dev); + local = iface->local; + + /* Why are we doing that ? Jean II */ + if (iface->type != HOSTAP_INTERFACE_MAIN) + return NULL; + + wstats = &local->wstats; + + wstats->status = 0; + wstats->discard.code = + local->comm_tallies.rx_discards_wep_undecryptable; + wstats->discard.misc = + local->comm_tallies.rx_fcs_errors + + local->comm_tallies.rx_discards_no_buffer + + local->comm_tallies.tx_discards_wrong_sa; + + wstats->discard.retries = + local->comm_tallies.tx_retry_limit_exceeded; + wstats->discard.fragment = + local->comm_tallies.rx_message_in_bad_msg_fragments; + + if (local->iw_mode != IW_MODE_MASTER && + local->iw_mode != IW_MODE_REPEAT) { + int update = 1; +#ifdef in_atomic + /* RID reading might sleep and it must not be called in + * interrupt context or while atomic. However, this + * function seems to be called while atomic (at least in Linux + * 2.5.59). Update signal quality values only if in suitable + * context. Otherwise, previous values read from tick timer + * will be used. */ + if (in_atomic()) + update = 0; +#endif /* in_atomic */ + + if (update && prism2_update_comms_qual(dev) == 0) + wstats->qual.updated = 7; + + wstats->qual.qual = local->comms_qual; + wstats->qual.level = local->avg_signal; + wstats->qual.noise = local->avg_noise; + } else { + wstats->qual.qual = 0; + wstats->qual.level = 0; + wstats->qual.noise = 0; + wstats->qual.updated = 0; + } + + return wstats; +} + + +static int prism2_get_datarates(struct net_device *dev, u8 *rates) +{ + struct hostap_interface *iface; + local_info_t *local; + u8 buf[12]; + int len; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf, + sizeof(buf), 0); + if (len < 2) + return 0; + + val = le16_to_cpu(*(u16 *) buf); /* string length */ + + if (len - 2 < val || val > 10) + return 0; + + memcpy(rates, buf + 2, val); + return val; +} + + +static int prism2_get_name(struct net_device *dev, + struct iw_request_info *info, + char *name, char *extra) +{ + u8 rates[10]; + int len, i, over2 = 0; + + len = prism2_get_datarates(dev, rates); + + for (i = 0; i < len; i++) { + if (rates[i] == 0x0b || rates[i] == 0x16) { + over2 = 1; + break; + } + } + + strcpy(name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS"); + + return 0; +} + + +static void prism2_crypt_delayed_deinit(local_info_t *local, + struct ieee80211_crypt_data **crypt) +{ + struct ieee80211_crypt_data *tmp; + unsigned long flags; + + tmp = *crypt; + *crypt = NULL; + + if (tmp == NULL) + return; + + /* must not run ops->deinit() while there may be pending encrypt or + * decrypt operations. Use a list of delayed deinits to avoid needing + * locking. */ + + spin_lock_irqsave(&local->lock, flags); + list_add(&tmp->list, &local->crypt_deinit_list); + if (!timer_pending(&local->crypt_deinit_timer)) { + local->crypt_deinit_timer.expires = jiffies + HZ; + add_timer(&local->crypt_deinit_timer); + } + spin_unlock_irqrestore(&local->lock, flags); +} + + +static int prism2_ioctl_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf) +{ + struct hostap_interface *iface; + local_info_t *local; + int i; + struct ieee80211_crypt_data **crypt; + + iface = netdev_priv(dev); + local = iface->local; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > 4) + i = local->tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + crypt = &local->crypt[i]; + + if (erq->flags & IW_ENCODE_DISABLED) { + if (*crypt) + prism2_crypt_delayed_deinit(local, crypt); + goto done; + } + + if (*crypt != NULL && (*crypt)->ops != NULL && + strcmp((*crypt)->ops->name, "WEP") != 0) { + /* changing to use WEP; deinit previously used algorithm */ + prism2_crypt_delayed_deinit(local, crypt); + } + + if (*crypt == NULL) { + struct ieee80211_crypt_data *new_crypt; + + /* take WEP into use */ + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(struct ieee80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) + return -ENOMEM; + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ieee80211_get_crypto_ops("WEP"); + if (!new_crypt->ops) { + request_module("ieee80211_crypt_wep"); + new_crypt->ops = ieee80211_get_crypto_ops("WEP"); + } + if (new_crypt->ops) + new_crypt->priv = new_crypt->ops->init(i); + if (!new_crypt->ops || !new_crypt->priv) { + kfree(new_crypt); + new_crypt = NULL; + + printk(KERN_WARNING "%s: could not initialize WEP: " + "load module hostap_crypt_wep.o\n", + dev->name); + return -EOPNOTSUPP; + } + *crypt = new_crypt; + } + + if (erq->length > 0) { + int len = erq->length <= 5 ? 5 : 13; + int first = 1, j; + if (len > erq->length) + memset(keybuf + erq->length, 0, len - erq->length); + (*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv); + for (j = 0; j < WEP_KEYS; j++) { + if (j != i && local->crypt[j]) { + first = 0; + break; + } + } + if (first) + local->tx_keyidx = i; + } else { + /* No key data - just set the default TX key index */ + local->tx_keyidx = i; + } + + done: + local->open_wep = erq->flags & IW_ENCODE_OPEN; + + if (hostap_set_encryption(local)) { + printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); + return -EINVAL; + } + + /* Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. */ + if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) { + printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); + return -EINVAL; + } + + return 0; +} + + +static int prism2_ioctl_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *key) +{ + struct hostap_interface *iface; + local_info_t *local; + int i, len; + u16 val; + struct ieee80211_crypt_data *crypt; + + iface = netdev_priv(dev); + local = iface->local; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > 4) + i = local->tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + crypt = local->crypt[i]; + erq->flags = i + 1; + + if (crypt == NULL || crypt->ops == NULL) { + erq->length = 0; + erq->flags |= IW_ENCODE_DISABLED; + return 0; + } + + if (strcmp(crypt->ops->name, "WEP") != 0) { + /* only WEP is supported with wireless extensions, so just + * report that encryption is used */ + erq->length = 0; + erq->flags |= IW_ENCODE_ENABLED; + return 0; + } + + /* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show + * the keys from driver buffer */ + len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv); + erq->length = (len >= 0 ? len : 0); + + if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0) + { + printk("CNFWEPFLAGS reading failed\n"); + return -EOPNOTSUPP; + } + le16_to_cpus(&val); + if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED) + erq->flags |= IW_ENCODE_ENABLED; + else + erq->flags |= IW_ENCODE_DISABLED; + if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + return 0; +} + + +static int hostap_set_rate(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret, basic_rates; + + iface = netdev_priv(dev); + local = iface->local; + + basic_rates = local->basic_rates & local->tx_rate_control; + if (!basic_rates || basic_rates != local->basic_rates) { + printk(KERN_INFO "%s: updating basic rate set automatically " + "to match with the new supported rate set\n", + dev->name); + if (!basic_rates) + basic_rates = local->tx_rate_control; + + local->basic_rates = basic_rates; + if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + basic_rates)) + printk(KERN_WARNING "%s: failed to set " + "cnfBasicRates\n", dev->name); + } + + ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, + local->tx_rate_control) || + hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, + local->tx_rate_control) || + local->func->reset_port(dev)); + + if (ret) { + printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " + "setting to 0x%x failed\n", + dev->name, local->tx_rate_control); + } + + /* Update TX rate configuration for all STAs based on new operational + * rate set. */ + hostap_update_rates(local); + + return ret; +} + + +static int prism2_ioctl_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->fixed) { + switch (rrq->value) { + case 11000000: + local->tx_rate_control = HFA384X_RATES_11MBPS; + break; + case 5500000: + local->tx_rate_control = HFA384X_RATES_5MBPS; + break; + case 2000000: + local->tx_rate_control = HFA384X_RATES_2MBPS; + break; + case 1000000: + local->tx_rate_control = HFA384X_RATES_1MBPS; + break; + default: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + } + } else { + switch (rrq->value) { + case 11000000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + case 5500000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS; + break; + case 2000000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS; + break; + case 1000000: + local->tx_rate_control = HFA384X_RATES_1MBPS; + break; + default: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + } + } + + return hostap_set_rate(dev); +} + + +static int prism2_ioctl_giwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + u16 val; + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) < + 0) + return -EINVAL; + + if ((val & 0x1) && (val > 1)) + rrq->fixed = 0; + else + rrq->fixed = 1; + + if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL && + !local->fw_tx_rate_control) { + /* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in + * Host AP mode, so use the recorded TX rate of the last sent + * frame */ + rrq->value = local->ap->last_tx_rate > 0 ? + local->ap->last_tx_rate * 100000 : 11000000; + return 0; + } + + if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) < + 0) + return -EINVAL; + + switch (val) { + case HFA384X_RATES_1MBPS: + rrq->value = 1000000; + break; + case HFA384X_RATES_2MBPS: + rrq->value = 2000000; + break; + case HFA384X_RATES_5MBPS: + rrq->value = 5500000; + break; + case HFA384X_RATES_11MBPS: + rrq->value = 11000000; + break; + default: + /* should not happen */ + rrq->value = 11000000; + ret = -EINVAL; + break; + } + + return ret; +} + + +static int prism2_ioctl_siwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* Set the desired AP density */ + if (sens->value < 1 || sens->value > 3) + return -EINVAL; + + if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + /* Get the current AP density */ + if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) < + 0) + return -EINVAL; + + sens->value = __le16_to_cpu(val); + sens->fixed = 1; + + return 0; +} + + +/* Deprecated in new wireless extension API */ +static int prism2_ioctl_giwaplist(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + struct sockaddr *addr; + struct iw_quality *qual; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->iw_mode != IW_MODE_MASTER) { + printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " + "in Host AP mode\n"); + data->length = 0; + return -EOPNOTSUPP; + } + + addr = kmalloc(sizeof(struct sockaddr) * IW_MAX_AP, GFP_KERNEL); + qual = kmalloc(sizeof(struct iw_quality) * IW_MAX_AP, GFP_KERNEL); + if (addr == NULL || qual == NULL) { + kfree(addr); + kfree(qual); + data->length = 0; + return -ENOMEM; + } + + data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); + + memcpy(extra, &addr, sizeof(struct sockaddr) * data->length); + data->flags = 1; /* has quality information */ + memcpy(extra + sizeof(struct sockaddr) * data->length, &qual, + sizeof(struct iw_quality) * data->length); + + kfree(addr); + kfree(qual); + + return 0; +} + + +static int prism2_ioctl_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (rts->disabled) + val = __constant_cpu_to_le16(2347); + else if (rts->value < 0 || rts->value > 2347) + return -EINVAL; + else + val = __cpu_to_le16(rts->value); + + if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) || + local->func->reset_port(dev)) + return -EINVAL; + + local->rts_threshold = rts->value; + + return 0; +} + +static int prism2_ioctl_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) < + 0) + return -EINVAL; + + rts->value = __le16_to_cpu(val); + rts->disabled = (rts->value == 2347); + rts->fixed = 1; + + return 0; +} + + +static int prism2_ioctl_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (rts->disabled) + val = __constant_cpu_to_le16(2346); + else if (rts->value < 256 || rts->value > 2346) + return -EINVAL; + else + val = __cpu_to_le16(rts->value & ~0x1); /* even numbers only */ + + local->fragm_threshold = rts->value & ~0x1; + if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val, + 2) + || local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + &val, 2, 1) < 0) + return -EINVAL; + + rts->value = __le16_to_cpu(val); + rts->disabled = (rts->value == 2346); + rts->fixed = 1; + + return 0; +} + + +#ifndef PRISM2_NO_STATION_MODES +static int hostap_join_ap(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_join_request req; + unsigned long flags; + int i; + struct hfa384x_hostscan_result *entry; + + iface = netdev_priv(dev); + local = iface->local; + + memcpy(req.bssid, local->preferred_ap, ETH_ALEN); + req.channel = 0; + + spin_lock_irqsave(&local->lock, flags); + for (i = 0; i < local->last_scan_results_count; i++) { + if (!local->last_scan_results) + break; + entry = &local->last_scan_results[i]; + if (memcmp(local->preferred_ap, entry->bssid, ETH_ALEN) == 0) { + req.channel = entry->chid; + break; + } + } + spin_unlock_irqrestore(&local->lock, flags); + + if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, + sizeof(req))) { + printk(KERN_DEBUG "%s: JoinRequest " MACSTR + " failed\n", + dev->name, MAC2STR(local->preferred_ap)); + return -1; + } + + printk(KERN_DEBUG "%s: Trying to join BSSID " MACSTR "\n", + dev->name, MAC2STR(local->preferred_ap)); + + return 0; +} +#endif /* PRISM2_NO_STATION_MODES */ + + +static int prism2_ioctl_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN); + + if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) { + struct hfa384x_scan_request scan_req; + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = __constant_cpu_to_le16(0x3fff); + scan_req.txrate = __constant_cpu_to_le16(HFA384X_RATES_1MBPS); + if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, + &scan_req, sizeof(scan_req))) { + printk(KERN_DEBUG "%s: ScanResults request failed - " + "preferred AP delayed to next unsolicited " + "scan\n", dev->name); + } + } else if (local->host_roaming == 2 && + local->iw_mode == IW_MODE_INFRA) { + if (hostap_join_ap(dev)) + return -EINVAL; + } else { + printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " + "in Managed mode when host_roaming is enabled\n", + dev->name); + } + + return 0; +#endif /* PRISM2_NO_STATION_MODES */ +} + +static int prism2_ioctl_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + ap_addr->sa_family = ARPHRD_ETHER; + switch (iface->type) { + case HOSTAP_INTERFACE_AP: + memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN); + break; + case HOSTAP_INTERFACE_STA: + memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN); + break; + case HOSTAP_INTERFACE_WDS: + memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN); + break; + default: + if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID, + &ap_addr->sa_data, ETH_ALEN, 1) < 0) + return -EOPNOTSUPP; + + /* local->bssid is also updated in LinkStatus handler when in + * station mode */ + memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN); + break; + } + + return 0; +} + + +static int prism2_ioctl_siwnickn(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *nickname) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + memset(local->name, 0, sizeof(local->name)); + memcpy(local->name, nickname, data->length); + local->name_set = 1; + + if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwnickn(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *nickname) +{ + struct hostap_interface *iface; + local_info_t *local; + int len; + char name[MAX_NAME_LEN + 3]; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME, + &name, MAX_NAME_LEN + 2, 0); + val = __le16_to_cpu(*(u16 *) name); + if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN) + return -EOPNOTSUPP; + + name[val + 2] = '\0'; + data->length = val + 1; + memcpy(nickname, name + 2, val + 1); + + return 0; +} + + +static int prism2_ioctl_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* freq => chan. */ + if (freq->e == 1 && + freq->m / 100000 >= freq_list[0] && + freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) { + int ch; + int fr = freq->m / 100000; + for (ch = 0; ch < FREQ_COUNT; ch++) { + if (fr == freq_list[ch]) { + freq->e = 0; + freq->m = ch + 1; + break; + } + } + } + + if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT || + !(local->channel_mask & (1 << (freq->m - 1)))) + return -EINVAL; + + local->channel = freq->m; /* channel is used in prism2_setup_rids() */ + if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) < + 0) + return -EINVAL; + + le16_to_cpus(&val); + if (val < 1 || val > FREQ_COUNT) + return -EINVAL; + + freq->m = freq_list[val - 1] * 100000; + freq->e = 1; + + return 0; +} + + +static void hostap_monitor_set_type(local_info_t *local) +{ + struct net_device *dev = local->ddev; + + if (dev == NULL) + return; + + if (local->monitor_type == PRISM2_MONITOR_PRISM || + local->monitor_type == PRISM2_MONITOR_CAPHDR) { + dev->type = ARPHRD_IEEE80211_PRISM; + dev->hard_header_parse = + hostap_80211_prism_header_parse; + } else { + dev->type = ARPHRD_IEEE80211; + dev->hard_header_parse = hostap_80211_header_parse; + } +} + + +static int prism2_ioctl_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (iface->type == HOSTAP_INTERFACE_WDS) + return -EOPNOTSUPP; + + if (data->flags == 0) + ssid[0] = '\0'; /* ANY */ + + if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') { + /* Setting SSID to empty string seems to kill the card in + * Host AP mode */ + printk(KERN_DEBUG "%s: Host AP mode does not support " + "'Any' essid\n", dev->name); + return -EINVAL; + } + + memcpy(local->essid, ssid, data->length); + local->essid[data->length] = '\0'; + + if ((!local->fw_ap && + hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid)) + || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *essid) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (iface->type == HOSTAP_INTERFACE_WDS) + return -EOPNOTSUPP; + + data->flags = 1; /* active */ + if (local->iw_mode == IW_MODE_MASTER) { + data->length = strlen(local->essid); + memcpy(essid, local->essid, IW_ESSID_MAX_SIZE); + } else { + int len; + char ssid[MAX_SSID_LEN + 2]; + memset(ssid, 0, sizeof(ssid)); + len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID, + &ssid, MAX_SSID_LEN + 2, 0); + val = __le16_to_cpu(*(u16 *) ssid); + if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) { + return -EOPNOTSUPP; + } + data->length = val; + memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE); + } + + return 0; +} + + +static int prism2_ioctl_giwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + struct iw_range *range = (struct iw_range *) extra; + u8 rates[10]; + u16 val; + int i, len, over2; + + iface = netdev_priv(dev); + local = iface->local; + + data->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + /* TODO: could fill num_txpower and txpower array with + * something; however, there are 128 different values.. */ + + range->txpower_capa = IW_TXPOW_DBM; + + if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC) + { + range->min_pmp = 1 * 1024; + range->max_pmp = 65535 * 1024; + range->min_pmt = 1 * 1024; + range->max_pmt = 1000 * 1024; + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | + IW_POWER_UNICAST_R | IW_POWER_ALL_R; + } + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 18; + + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->min_retry = 0; + range->max_retry = 255; + + range->num_channels = FREQ_COUNT; + + val = 0; + for (i = 0; i < FREQ_COUNT; i++) { + if (local->channel_mask & (1 << i)) { + range->freq[val].i = i + 1; + range->freq[val].m = freq_list[i] * 100000; + range->freq[val].e = 1; + val++; + } + if (val == IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = val; + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { + range->max_qual.qual = 70; /* what is correct max? This was not + * documented exactly. At least + * 69 has been observed. */ + range->max_qual.level = 0; /* dB */ + range->max_qual.noise = 0; /* dB */ + + /* What would be suitable values for "average/typical" qual? */ + range->avg_qual.qual = 20; + range->avg_qual.level = -60; + range->avg_qual.noise = -95; + } else { + range->max_qual.qual = 92; /* 0 .. 92 */ + range->max_qual.level = 154; /* 27 .. 154 */ + range->max_qual.noise = 154; /* 27 .. 154 */ + } + range->sensitivity = 3; + + range->max_encoding_tokens = WEP_KEYS; + range->num_encoding_sizes = 2; + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; + + over2 = 0; + len = prism2_get_datarates(dev, rates); + range->num_bitrates = 0; + for (i = 0; i < len; i++) { + if (range->num_bitrates < IW_MAX_BITRATES) { + range->bitrate[range->num_bitrates] = + rates[i] * 500000; + range->num_bitrates++; + } + if (rates[i] == 0x0b || rates[i] == 0x16) + over2 = 1; + } + /* estimated maximum TCP throughput values (bps) */ + range->throughput = over2 ? 5500000 : 1500000; + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | + IW_EVENT_CAPA_MASK(SIOCGIWAP) | + IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) | + IW_EVENT_CAPA_MASK(IWEVCUSTOM) | + IW_EVENT_CAPA_MASK(IWEVREGISTERED) | + IW_EVENT_CAPA_MASK(IWEVEXPIRED)); + + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | + IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; + + return 0; +} + + +static int hostap_monitor_mode_enable(local_info_t *local) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "Enabling monitor mode\n"); + hostap_monitor_set_type(local); + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_PSEUDO_IBSS)) { + printk(KERN_DEBUG "Port type setting for monitor mode " + "failed\n"); + return -EOPNOTSUPP; + } + + /* Host decrypt is needed to get the IV and ICV fields; + * however, monitor mode seems to remove WEP flag from frame + * control field */ + if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, + HFA384X_WEPFLAGS_HOSTENCRYPT | + HFA384X_WEPFLAGS_HOSTDECRYPT)) { + printk(KERN_DEBUG "WEP flags setting failed\n"); + return -EOPNOTSUPP; + } + + if (local->func->reset_port(dev) || + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_MONITOR << 8), + 0, NULL, NULL)) { + printk(KERN_DEBUG "Setting monitor mode failed\n"); + return -EOPNOTSUPP; + } + + return 0; +} + + +static int hostap_monitor_mode_disable(local_info_t *local) +{ + struct net_device *dev = local->ddev; + + if (dev == NULL) + return -1; + + printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); + dev->type = ARPHRD_ETHER; + dev->hard_header_parse = local->saved_eth_header_parse; + if (local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_STOP << 8), + 0, NULL, NULL)) + return -1; + return hostap_set_encryption(local); +} + + +static int prism2_ioctl_siwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int double_reset = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA && + *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT && + *mode != IW_MODE_MONITOR) + return -EOPNOTSUPP; + +#ifdef PRISM2_NO_STATION_MODES + if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA) + return -EOPNOTSUPP; +#endif /* PRISM2_NO_STATION_MODES */ + + if (*mode == local->iw_mode) + return 0; + + if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') { + printk(KERN_WARNING "%s: empty SSID not allowed in Master " + "mode\n", dev->name); + return -EINVAL; + } + + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_mode_disable(local); + + if ((local->iw_mode == IW_MODE_ADHOC || + local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) { + /* There seems to be a firmware bug in at least STA f/w v1.5.6 + * that leaves beacon frames to use IBSS type when moving from + * IBSS to Host AP mode. Doing double Port0 reset seems to be + * enough to workaround this. */ + double_reset = 1; + } + + printk(KERN_DEBUG "prism2: %s: operating mode changed " + "%d -> %d\n", dev->name, local->iw_mode, *mode); + local->iw_mode = *mode; + + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_mode_enable(local); + else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " + "a workaround for firmware bug in Host AP mode WEP\n", + dev->name); + local->host_encrypt = 1; + } + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + hostap_get_porttype(local))) + return -EOPNOTSUPP; + + if (local->func->reset_port(dev)) + return -EINVAL; + if (double_reset && local->func->reset_port(dev)) + return -EINVAL; + + if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC) + { + /* netif_carrier is used only in client modes for now, so make + * sure carrier is on when moving to non-client modes. */ + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + } + return 0; +} + + +static int prism2_ioctl_giwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + switch (iface->type) { + case HOSTAP_INTERFACE_STA: + *mode = IW_MODE_INFRA; + break; + case HOSTAP_INTERFACE_WDS: + *mode = IW_MODE_REPEAT; + break; + default: + *mode = local->iw_mode; + break; + } + return 0; +} + + +static int prism2_ioctl_siwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + int ret = 0; + + if (wrq->disabled) + return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0); + + switch (wrq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + break; + case IW_POWER_ALL_R: + ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + break; + case IW_POWER_ON: + break; + default: + return -EINVAL; + } + + if (wrq->flags & IW_POWER_TIMEOUT) { + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION, + wrq->value / 1024); + if (ret) + return ret; + } + if (wrq->flags & IW_POWER_PERIOD) { + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION, + wrq->value / 1024); + if (ret) + return ret; + } + + return ret; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_giwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + u16 enable, mcast; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1) + < 0) + return -EINVAL; + + if (!__le16_to_cpu(enable)) { + rrq->disabled = 1; + return 0; + } + + rrq->disabled = 0; + + if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + u16 timeout; + if (local->func->get_rid(dev, + HFA384X_RID_CNFPMHOLDOVERDURATION, + &timeout, 2, 1) < 0) + return -EINVAL; + + rrq->flags = IW_POWER_TIMEOUT; + rrq->value = __le16_to_cpu(timeout) * 1024; + } else { + u16 period; + if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION, + &period, 2, 1) < 0) + return -EINVAL; + + rrq->flags = IW_POWER_PERIOD; + rrq->value = __le16_to_cpu(period) * 1024; + } + + if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast, + 2, 1) < 0) + return -EINVAL; + + if (__le16_to_cpu(mcast)) + rrq->flags |= IW_POWER_ALL_R; + else + rrq->flags |= IW_POWER_UNICAST_R; + + return 0; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->disabled) + return -EINVAL; + + /* setting retry limits is not supported with the current station + * firmware code; simulate this with alternative retry count for now */ + if (rrq->flags == IW_RETRY_LIMIT) { + if (rrq->value < 0) { + /* disable manual retry count setting and use firmware + * defaults */ + local->manual_retry_count = -1; + local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY; + } else { + if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, + rrq->value)) { + printk(KERN_DEBUG "%s: Alternate retry count " + "setting to %d failed\n", + dev->name, rrq->value); + return -EOPNOTSUPP; + } + + local->manual_retry_count = rrq->value; + local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY; + } + return 0; + } + + return -EOPNOTSUPP; + +#if 0 + /* what could be done, if firmware would support this.. */ + + if (rrq->flags & IW_RETRY_LIMIT) { + if (rrq->flags & IW_RETRY_MAX) + HFA384X_RID_LONGRETRYLIMIT = rrq->value; + else if (rrq->flags & IW_RETRY_MIN) + HFA384X_RID_SHORTRETRYLIMIT = rrq->value; + else { + HFA384X_RID_LONGRETRYLIMIT = rrq->value; + HFA384X_RID_SHORTRETRYLIMIT = rrq->value; + } + + } + + if (rrq->flags & IW_RETRY_LIFETIME) { + HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024; + } + + return 0; +#endif /* 0 */ +} + +static int prism2_ioctl_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 shortretry, longretry, lifetime, altretry; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry, + 2, 1) < 0 || + local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry, + 2, 1) < 0 || + local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME, + &lifetime, 2, 1) < 0) + return -EINVAL; + + le16_to_cpus(&shortretry); + le16_to_cpus(&longretry); + le16_to_cpus(&lifetime); + + rrq->disabled = 0; + + if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + rrq->flags = IW_RETRY_LIFETIME; + rrq->value = lifetime * 1024; + } else { + if (local->manual_retry_count >= 0) { + rrq->flags = IW_RETRY_LIMIT; + if (local->func->get_rid(dev, + HFA384X_RID_CNFALTRETRYCOUNT, + &altretry, 2, 1) >= 0) + rrq->value = le16_to_cpu(altretry); + else + rrq->value = local->manual_retry_count; + } else if ((rrq->flags & IW_RETRY_MAX)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + rrq->value = longretry; + } else { + rrq->flags = IW_RETRY_LIMIT; + rrq->value = shortretry; + if (shortretry != longretry) + rrq->flags |= IW_RETRY_MIN; + } + } + return 0; +} + + +/* Note! This TX power controlling is experimental and should not be used in + * production use. It just sets raw power register and does not use any kind of + * feedback information from the measured TX power (CR58). This is now + * commented out to make sure that it is not used by accident. TX power + * configuration will be enabled again after proper algorithm using feedback + * has been implemented. */ + +#ifdef RAW_TXPOWER_SETTING +/* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping.. + * This version assumes following mapping: + * CR31 is 7-bit value with -64 to +63 range. + * -64 is mapped into +20dBm and +63 into -43dBm. + * This is certainly not an exact mapping for every card, but at least + * increasing dBm value should correspond to increasing TX power. + */ + +static int prism2_txpower_hfa386x_to_dBm(u16 val) +{ + signed char tmp; + + if (val > 255) + val = 255; + + tmp = val; + tmp >>= 2; + + return -12 - tmp; +} + +static u16 prism2_txpower_dBm_to_hfa386x(int val) +{ + signed char tmp; + + if (val > 20) + return 128; + else if (val < -43) + return 127; + + tmp = val; + tmp = -12 - tmp; + tmp <<= 2; + + return (unsigned char) tmp; +} +#endif /* RAW_TXPOWER_SETTING */ + + +static int prism2_ioctl_siwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; +#ifdef RAW_TXPOWER_SETTING + char *tmp; +#endif + u16 val; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->disabled) { + if (local->txpower_type != PRISM2_TXPOWER_OFF) { + val = 0xff; /* use all standby and sleep modes */ + ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_A_D_TEST_MODES2, + &val, NULL); + printk(KERN_DEBUG "%s: Turning radio off: %s\n", + dev->name, ret ? "failed" : "OK"); + local->txpower_type = PRISM2_TXPOWER_OFF; + } + return (ret ? -EOPNOTSUPP : 0); + } + + if (local->txpower_type == PRISM2_TXPOWER_OFF) { + val = 0; /* disable all standby and sleep modes */ + ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_A_D_TEST_MODES2, &val, NULL); + printk(KERN_DEBUG "%s: Turning radio on: %s\n", + dev->name, ret ? "failed" : "OK"); + local->txpower_type = PRISM2_TXPOWER_UNKNOWN; + } + +#ifdef RAW_TXPOWER_SETTING + if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) { + printk(KERN_DEBUG "Setting ALC on\n"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL); + local->txpower_type = PRISM2_TXPOWER_AUTO; + return 0; + } + + if (local->txpower_type != PRISM2_TXPOWER_FIXED) { + printk(KERN_DEBUG "Setting ALC off\n"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); + local->txpower_type = PRISM2_TXPOWER_FIXED; + } + + if (rrq->flags == IW_TXPOW_DBM) + tmp = "dBm"; + else if (rrq->flags == IW_TXPOW_MWATT) + tmp = "mW"; + else + tmp = "UNKNOWN"; + printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); + + if (rrq->flags != IW_TXPOW_DBM) { + printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); + return -EOPNOTSUPP; + } + + local->txpower = rrq->value; + val = prism2_txpower_dBm_to_hfa386x(local->txpower); + if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_MANUAL_TX_POWER, &val, NULL)) + ret = -EOPNOTSUPP; +#else /* RAW_TXPOWER_SETTING */ + if (rrq->fixed) + ret = -EOPNOTSUPP; +#endif /* RAW_TXPOWER_SETTING */ + + return ret; +} + +static int prism2_ioctl_giwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ +#ifdef RAW_TXPOWER_SETTING + struct hostap_interface *iface; + local_info_t *local; + u16 resp0; + + iface = netdev_priv(dev); + local = iface->local; + + rrq->flags = IW_TXPOW_DBM; + rrq->disabled = 0; + rrq->fixed = 0; + + if (local->txpower_type == PRISM2_TXPOWER_AUTO) { + if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_MANUAL_TX_POWER, + NULL, &resp0) == 0) { + rrq->value = prism2_txpower_hfa386x_to_dBm(resp0); + } else { + /* Could not get real txpower; guess 15 dBm */ + rrq->value = 15; + } + } else if (local->txpower_type == PRISM2_TXPOWER_OFF) { + rrq->value = 0; + rrq->disabled = 1; + } else if (local->txpower_type == PRISM2_TXPOWER_FIXED) { + rrq->value = local->txpower; + rrq->fixed = 1; + } else { + printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", + local->txpower_type); + } + return 0; +#else /* RAW_TXPOWER_SETTING */ + return -EOPNOTSUPP; +#endif /* RAW_TXPOWER_SETTING */ +} + + +#ifndef PRISM2_NO_STATION_MODES + +/* HostScan request works with and without host_roaming mode. In addition, it + * does not break current association. However, it requires newer station + * firmware version (>= 1.3.1) than scan request. */ +static int prism2_request_hostscan(struct net_device *dev, + u8 *ssid, u8 ssid_len) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_hostscan_request scan_req; + + iface = netdev_priv(dev); + local = iface->local; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(local->channel_mask & + local->scan_channel_mask); + scan_req.txrate = __constant_cpu_to_le16(HFA384X_RATES_1MBPS); + if (ssid) { + if (ssid_len > 32) + return -EINVAL; + scan_req.target_ssid_len = cpu_to_le16(ssid_len); + memcpy(scan_req.target_ssid, ssid, ssid_len); + } + + if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); + return -EINVAL; + } + return 0; +} + + +static int prism2_request_scan(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_scan_request scan_req; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(local->channel_mask & + local->scan_channel_mask); + scan_req.txrate = __constant_cpu_to_le16(HFA384X_RATES_1MBPS); + + /* FIX: + * It seems to be enough to set roaming mode for a short moment to + * host-based and then setup scanrequest data and return the mode to + * firmware-based. + * + * Master mode would need to drop to Managed mode for a short while + * to make scanning work.. Or sweep through the different channels and + * use passive scan based on beacons. */ + + if (!local->host_roaming) + hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, + HFA384X_ROAMING_HOST); + + if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "SCANREQUEST failed\n"); + ret = -EINVAL; + } + + if (!local->host_roaming) + hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, + HFA384X_ROAMING_FIRMWARE); + + return 0; +} + +#else /* !PRISM2_NO_STATION_MODES */ + +static inline int prism2_request_hostscan(struct net_device *dev, + u8 *ssid, u8 ssid_len) +{ + return -EOPNOTSUPP; +} + + +static inline int prism2_request_scan(struct net_device *dev) +{ + return -EOPNOTSUPP; +} + +#endif /* !PRISM2_NO_STATION_MODES */ + + +static int prism2_ioctl_siwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret; + u8 *ssid = NULL, ssid_len = 0; + struct iw_scan_req *req = (struct iw_scan_req *) extra; + + iface = netdev_priv(dev); + local = iface->local; + + if (data->length < sizeof(struct iw_scan_req)) + req = NULL; + + if (local->iw_mode == IW_MODE_MASTER) { + /* In master mode, we just return the results of our local + * tables, so we don't need to start anything... + * Jean II */ + data->length = 0; + return 0; + } + + if (!local->dev_enabled) + return -ENETDOWN; + + if (req && data->flags & IW_SCAN_THIS_ESSID) { + ssid = req->essid; + ssid_len = req->essid_len; + + if (ssid_len && + ((local->iw_mode != IW_MODE_INFRA && + local->iw_mode != IW_MODE_ADHOC) || + (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))) + return -EOPNOTSUPP; + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) + ret = prism2_request_hostscan(dev, ssid, ssid_len); + else + ret = prism2_request_scan(dev); + + if (ret == 0) + local->scan_timestamp = jiffies; + + /* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */ + + return ret; +} + + +#ifndef PRISM2_NO_STATION_MODES +static char * __prism2_translate_scan(local_info_t *local, + struct hfa384x_hostscan_result *scan, + struct hostap_bss_info *bss, + char *current_ev, char *end_buf) +{ + int i, chan; + struct iw_event iwe; + char *current_val; + u16 capabilities; + u8 *pos; + u8 *ssid, *bssid; + size_t ssid_len; + char *buf; + + if (bss) { + ssid = bss->ssid; + ssid_len = bss->ssid_len; + bssid = bss->bssid; + } else { + ssid = scan->ssid; + ssid_len = le16_to_cpu(scan->ssid_len); + bssid = scan->bssid; + } + if (ssid_len > 32) + ssid_len = 32; + + /* First entry *MUST* be the AP MAC address */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); + /* FIX: + * I do not know how this is possible, but iwe_stream_add_event + * seems to re-order memcpy execution so that len is set only + * after copying.. Pre-setting len here "fixes" this, but real + * problems should be solved (after which these iwe.len + * settings could be removed from this function). */ + iwe.len = IW_EV_ADDR_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.length = ssid_len; + iwe.u.data.flags = 1; + iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWMODE; + if (bss) { + capabilities = bss->capab_info; + } else { + capabilities = le16_to_cpu(scan->capability); + } + if (capabilities & (WLAN_CAPABILITY_ESS | + WLAN_CAPABILITY_IBSS)) { + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + iwe.len = IW_EV_UINT_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_UINT_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWFREQ; + if (scan) { + chan = scan->chid; + } else if (bss) { + chan = bss->chan; + } else { + chan = 0; + } + + if (chan > 0) { + iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000; + iwe.u.freq.e = 1; + iwe.len = IW_EV_FREQ_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_FREQ_LEN); + } + + if (scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVQUAL; + if (local->last_scan_type == PRISM2_HOSTSCAN) { + iwe.u.qual.level = le16_to_cpu(scan->sl); + iwe.u.qual.noise = le16_to_cpu(scan->anl); + } else { + iwe.u.qual.level = + HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl)); + iwe.u.qual.noise = + HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); + } + iwe.len = IW_EV_QUAL_LEN; + current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, + IW_EV_QUAL_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); + + /* TODO: add SuppRates into BSS table */ + if (scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWRATE; + current_val = current_ev + IW_EV_LCP_LEN; + pos = scan->sup_rates; + for (i = 0; i < sizeof(scan->sup_rates); i++) { + if (pos[i] == 0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); + current_val = iwe_stream_add_value( + current_ev, current_val, end_buf, &iwe, + IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if ((current_val - current_ev) > IW_EV_LCP_LEN) + current_ev = current_val; + } + + /* TODO: add BeaconInt,resp_rate,atim into BSS table */ + buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_KERNEL); + if (buf && scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, + buf); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, + buf); + + if (local->last_scan_type == PRISM2_HOSTSCAN && + (capabilities & WLAN_CAPABILITY_IBSS)) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(current_ev, end_buf, + &iwe, buf); + } + } + kfree(buf); + + if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = bss->wpa_ie_len; + current_ev = iwe_stream_add_point( + current_ev, end_buf, &iwe, bss->wpa_ie); + } + + if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = bss->rsn_ie_len; + current_ev = iwe_stream_add_point( + current_ev, end_buf, &iwe, bss->rsn_ie); + } + + return current_ev; +} + + +/* Translate scan data returned from the card to a card independant + * format that the Wireless Tools will understand - Jean II */ +static inline int prism2_translate_scan(local_info_t *local, + char *buffer, int buflen) +{ + struct hfa384x_hostscan_result *scan; + int entry, hostscan; + char *current_ev = buffer; + char *end_buf = buffer + buflen; + struct list_head *ptr; + + spin_lock_bh(&local->lock); + + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + bss->included = 0; + } + + hostscan = local->last_scan_type == PRISM2_HOSTSCAN; + for (entry = 0; entry < local->last_scan_results_count; entry++) { + int found = 0; + scan = &local->last_scan_results[entry]; + + /* Report every SSID if the AP is using multiple SSIDs. If no + * BSS record is found (e.g., when WPA mode is disabled), + * report the AP once. */ + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + if (memcmp(bss->bssid, scan->bssid, ETH_ALEN) == 0) { + bss->included = 1; + current_ev = __prism2_translate_scan( + local, scan, bss, current_ev, end_buf); + found++; + } + } + if (!found) { + current_ev = __prism2_translate_scan( + local, scan, NULL, current_ev, end_buf); + } + /* Check if there is space for one more entry */ + if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + spin_unlock_bh(&local->lock); + return -E2BIG; + } + } + + /* Prism2 firmware has limits (32 at least in some versions) for number + * of BSSes in scan results. Extend this limit by using local BSS list. + */ + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + if (bss->included) + continue; + current_ev = __prism2_translate_scan(local, NULL, bss, + current_ev, end_buf); + /* Check if there is space for one more entry */ + if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + spin_unlock_bh(&local->lock); + return -E2BIG; + } + } + + spin_unlock_bh(&local->lock); + + return current_ev - buffer; +} +#endif /* PRISM2_NO_STATION_MODES */ + + +static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + /* Wait until the scan is finished. We can probably do better + * than that - Jean II */ + if (local->scan_timestamp && + time_before(jiffies, local->scan_timestamp + 3 * HZ)) { + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy + * (there may be multiple simultaneous callers). + * Second, we grab some rtnetlink lock before comming + * here (in dev_ioctl()). + * Third, the caller can wait on the Wireless Event + * - Jean II */ + return -EAGAIN; + } + local->scan_timestamp = 0; + + res = prism2_translate_scan(local, extra, data->length); + + if (res >= 0) { + data->length = res; + return 0; + } else { + data->length = 0; + return res; + } +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_giwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->iw_mode == IW_MODE_MASTER) { + /* In MASTER mode, it doesn't make sense to go around + * scanning the frequencies and make the stations we serve + * wait when what the user is really interested about is the + * list of stations and access points we are talking to. + * So, just extract results from our cache... + * Jean II */ + + /* Translate to WE format */ + res = prism2_ap_translate_scan(dev, extra); + if (res >= 0) { + printk(KERN_DEBUG "Scan result translation succeeded " + "(length=%d)\n", res); + data->length = res; + return 0; + } else { + printk(KERN_DEBUG + "Scan result translation failed (res=%d)\n", + res); + data->length = 0; + return res; + } + } else { + /* Station mode */ + return prism2_ioctl_giwscan_sta(dev, info, data, extra); + } +} + + +static const struct iw_priv_args prism2_priv[] = { + { PRISM2_IOCTL_MONITOR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" }, + { PRISM2_IOCTL_READMIF, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" }, + { PRISM2_IOCTL_WRITEMIF, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" }, + { PRISM2_IOCTL_RESET, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" }, + { PRISM2_IOCTL_INQUIRE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" }, + { PRISM2_IOCTL_SET_RID_WORD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" }, + { PRISM2_IOCTL_MACCMD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" }, + { PRISM2_IOCTL_WDS_ADD, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" }, + { PRISM2_IOCTL_WDS_DEL, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" }, + { PRISM2_IOCTL_ADDMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" }, + { PRISM2_IOCTL_DELMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" }, + { PRISM2_IOCTL_KICKMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" }, + /* --- raw access to sub-ioctls --- */ + { PRISM2_IOCTL_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" }, + { PRISM2_IOCTL_GET_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" }, + /* --- sub-ioctls handlers --- */ + { PRISM2_IOCTL_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" }, + { PRISM2_IOCTL_GET_PRISM2_PARAM, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" }, + /* --- sub-ioctls definitions --- */ + { PRISM2_PARAM_TXRATECTRL, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" }, + { PRISM2_PARAM_TXRATECTRL, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" }, + { PRISM2_PARAM_BEACON_INT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" }, + { PRISM2_PARAM_BEACON_INT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" }, +#ifndef PRISM2_NO_STATION_MODES + { PRISM2_PARAM_PSEUDO_IBSS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" }, + { PRISM2_PARAM_PSEUDO_IBSS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" }, +#endif /* PRISM2_NO_STATION_MODES */ + { PRISM2_PARAM_ALC, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" }, + { PRISM2_PARAM_ALC, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" }, + { PRISM2_PARAM_DUMP, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" }, + { PRISM2_PARAM_DUMP, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" }, + { PRISM2_PARAM_OTHER_AP_POLICY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" }, + { PRISM2_PARAM_OTHER_AP_POLICY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" }, + { PRISM2_PARAM_AP_MAX_INACTIVITY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" }, + { PRISM2_PARAM_AP_MAX_INACTIVITY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" }, + { PRISM2_PARAM_AP_BRIDGE_PACKETS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" }, + { PRISM2_PARAM_AP_BRIDGE_PACKETS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" }, + { PRISM2_PARAM_DTIM_PERIOD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" }, + { PRISM2_PARAM_DTIM_PERIOD, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" }, + { PRISM2_PARAM_AP_NULLFUNC_ACK, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" }, + { PRISM2_PARAM_AP_NULLFUNC_ACK, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" }, + { PRISM2_PARAM_MAX_WDS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" }, + { PRISM2_PARAM_MAX_WDS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" }, + { PRISM2_PARAM_AP_AUTOM_AP_WDS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" }, + { PRISM2_PARAM_AP_AUTOM_AP_WDS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" }, + { PRISM2_PARAM_AP_AUTH_ALGS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" }, + { PRISM2_PARAM_AP_AUTH_ALGS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" }, + { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" }, + { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" }, + { PRISM2_PARAM_HOST_ENCRYPT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" }, + { PRISM2_PARAM_HOST_ENCRYPT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" }, + { PRISM2_PARAM_HOST_DECRYPT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" }, + { PRISM2_PARAM_HOST_DECRYPT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" }, +#ifndef PRISM2_NO_STATION_MODES + { PRISM2_PARAM_HOST_ROAMING, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" }, + { PRISM2_PARAM_HOST_ROAMING, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" }, +#endif /* PRISM2_NO_STATION_MODES */ + { PRISM2_PARAM_BCRX_STA_KEY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" }, + { PRISM2_PARAM_BCRX_STA_KEY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" }, + { PRISM2_PARAM_IEEE_802_1X, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" }, + { PRISM2_PARAM_IEEE_802_1X, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" }, + { PRISM2_PARAM_ANTSEL_TX, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" }, + { PRISM2_PARAM_ANTSEL_TX, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" }, + { PRISM2_PARAM_ANTSEL_RX, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" }, + { PRISM2_PARAM_ANTSEL_RX, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" }, + { PRISM2_PARAM_MONITOR_TYPE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" }, + { PRISM2_PARAM_MONITOR_TYPE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" }, + { PRISM2_PARAM_WDS_TYPE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" }, + { PRISM2_PARAM_WDS_TYPE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" }, + { PRISM2_PARAM_HOSTSCAN, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" }, + { PRISM2_PARAM_HOSTSCAN, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" }, + { PRISM2_PARAM_AP_SCAN, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" }, + { PRISM2_PARAM_AP_SCAN, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" }, + { PRISM2_PARAM_ENH_SEC, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" }, + { PRISM2_PARAM_ENH_SEC, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" }, +#ifdef PRISM2_IO_DEBUG + { PRISM2_PARAM_IO_DEBUG, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" }, + { PRISM2_PARAM_IO_DEBUG, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" }, +#endif /* PRISM2_IO_DEBUG */ + { PRISM2_PARAM_BASIC_RATES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" }, + { PRISM2_PARAM_BASIC_RATES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" }, + { PRISM2_PARAM_OPER_RATES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" }, + { PRISM2_PARAM_OPER_RATES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" }, + { PRISM2_PARAM_HOSTAPD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" }, + { PRISM2_PARAM_HOSTAPD, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" }, + { PRISM2_PARAM_HOSTAPD_STA, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" }, + { PRISM2_PARAM_HOSTAPD_STA, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" }, + { PRISM2_PARAM_WPA, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" }, + { PRISM2_PARAM_WPA, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" }, + { PRISM2_PARAM_PRIVACY_INVOKED, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" }, + { PRISM2_PARAM_PRIVACY_INVOKED, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" }, + { PRISM2_PARAM_TKIP_COUNTERMEASURES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" }, + { PRISM2_PARAM_TKIP_COUNTERMEASURES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" }, + { PRISM2_PARAM_DROP_UNENCRYPTED, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" }, + { PRISM2_PARAM_DROP_UNENCRYPTED, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" }, + { PRISM2_PARAM_SCAN_CHANNEL_MASK, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" }, + { PRISM2_PARAM_SCAN_CHANNEL_MASK, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" }, +}; + + +static int prism2_ioctl_priv_inquire(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->cmd(dev, HFA384X_CMDCODE_INQUIRE, *i, NULL, NULL)) + return -EOPNOTSUPP; + + return 0; +} + + +static int prism2_ioctl_priv_prism2_param(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int *i = (int *) extra; + int param = *i; + int value = *(i + 1); + int ret = 0; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + switch (param) { + case PRISM2_PARAM_TXRATECTRL: + local->fw_tx_rate_control = value; + break; + + case PRISM2_PARAM_BEACON_INT: + if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) || + local->func->reset_port(dev)) + ret = -EINVAL; + else + local->beacon_int = value; + break; + +#ifndef PRISM2_NO_STATION_MODES + case PRISM2_PARAM_PSEUDO_IBSS: + if (value == local->pseudo_adhoc) + break; + + if (value != 0 && value != 1) { + ret = -EINVAL; + break; + } + + printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", + dev->name, local->pseudo_adhoc, value); + local->pseudo_adhoc = value; + if (local->iw_mode != IW_MODE_ADHOC) + break; + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + hostap_get_porttype(local))) { + ret = -EOPNOTSUPP; + break; + } + + if (local->func->reset_port(dev)) + ret = -EINVAL; + break; +#endif /* PRISM2_NO_STATION_MODES */ + + case PRISM2_PARAM_ALC: + printk(KERN_DEBUG "%s: %s ALC\n", dev->name, + value == 0 ? "Disabling" : "Enabling"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), + value == 0 ? 0 : 1, &val, NULL); + break; + + case PRISM2_PARAM_DUMP: + local->frame_dump = value; + break; + + case PRISM2_PARAM_OTHER_AP_POLICY: + if (value < 0 || value > 3) { + ret = -EINVAL; + break; + } + if (local->ap != NULL) + local->ap->ap_policy = value; + break; + + case PRISM2_PARAM_AP_MAX_INACTIVITY: + if (value < 0 || value > 7 * 24 * 60 * 60) { + ret = -EINVAL; + break; + } + if (local->ap != NULL) + local->ap->max_inactivity = value * HZ; + break; + + case PRISM2_PARAM_AP_BRIDGE_PACKETS: + if (local->ap != NULL) + local->ap->bridge_packets = value; + break; + + case PRISM2_PARAM_DTIM_PERIOD: + if (value < 0 || value > 65535) { + ret = -EINVAL; + break; + } + if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value) + || local->func->reset_port(dev)) + ret = -EINVAL; + else + local->dtim_period = value; + break; + + case PRISM2_PARAM_AP_NULLFUNC_ACK: + if (local->ap != NULL) + local->ap->nullfunc_ack = value; + break; + + case PRISM2_PARAM_MAX_WDS: + local->wds_max_connections = value; + break; + + case PRISM2_PARAM_AP_AUTOM_AP_WDS: + if (local->ap != NULL) { + if (!local->ap->autom_ap_wds && value) { + /* add WDS link to all APs in STA table */ + hostap_add_wds_links(local); + } + local->ap->autom_ap_wds = value; + } + break; + + case PRISM2_PARAM_AP_AUTH_ALGS: + local->auth_algs = value; + if (hostap_set_auth_algs(local)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: + local->monitor_allow_fcserr = value; + break; + + case PRISM2_PARAM_HOST_ENCRYPT: + local->host_encrypt = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_HOST_DECRYPT: + local->host_decrypt = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + +#ifndef PRISM2_NO_STATION_MODES + case PRISM2_PARAM_HOST_ROAMING: + if (value < 0 || value > 2) { + ret = -EINVAL; + break; + } + local->host_roaming = value; + if (hostap_set_roaming(local) || local->func->reset_port(dev)) + ret = -EINVAL; + break; +#endif /* PRISM2_NO_STATION_MODES */ + + case PRISM2_PARAM_BCRX_STA_KEY: + local->bcrx_sta_key = value; + break; + + case PRISM2_PARAM_IEEE_802_1X: + local->ieee_802_1x = value; + break; + + case PRISM2_PARAM_ANTSEL_TX: + if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { + ret = -EINVAL; + break; + } + local->antsel_tx = value; + hostap_set_antsel(local); + break; + + case PRISM2_PARAM_ANTSEL_RX: + if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { + ret = -EINVAL; + break; + } + local->antsel_rx = value; + hostap_set_antsel(local); + break; + + case PRISM2_PARAM_MONITOR_TYPE: + if (value != PRISM2_MONITOR_80211 && + value != PRISM2_MONITOR_CAPHDR && + value != PRISM2_MONITOR_PRISM) { + ret = -EINVAL; + break; + } + local->monitor_type = value; + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_set_type(local); + break; + + case PRISM2_PARAM_WDS_TYPE: + local->wds_type = value; + break; + + case PRISM2_PARAM_HOSTSCAN: + { + struct hfa384x_hostscan_request scan_req; + u16 rate; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = __constant_cpu_to_le16(0x3fff); + switch (value) { + case 1: rate = HFA384X_RATES_1MBPS; break; + case 2: rate = HFA384X_RATES_2MBPS; break; + case 3: rate = HFA384X_RATES_5MBPS; break; + case 4: rate = HFA384X_RATES_11MBPS; break; + default: rate = HFA384X_RATES_1MBPS; break; + } + scan_req.txrate = cpu_to_le16(rate); + /* leave SSID empty to accept all SSIDs */ + + if (local->iw_mode == IW_MODE_MASTER) { + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_BSS) || + local->func->reset_port(dev)) + printk(KERN_DEBUG "Leaving Host AP mode " + "for HostScan failed\n"); + } + + if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "HOSTSCAN failed\n"); + ret = -EINVAL; + } + if (local->iw_mode == IW_MODE_MASTER) { + wait_queue_t __wait; + init_waitqueue_entry(&__wait, current); + add_wait_queue(&local->hostscan_wq, &__wait); + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + if (signal_pending(current)) + ret = -EINTR; + set_current_state(TASK_RUNNING); + remove_wait_queue(&local->hostscan_wq, &__wait); + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_HOSTAP) || + local->func->reset_port(dev)) + printk(KERN_DEBUG "Returning to Host AP mode " + "after HostScan failed\n"); + } + break; + } + + case PRISM2_PARAM_AP_SCAN: + local->passive_scan_interval = value; + if (timer_pending(&local->passive_scan_timer)) + del_timer(&local->passive_scan_timer); + if (value > 0) { + local->passive_scan_timer.expires = jiffies + + local->passive_scan_interval * HZ; + add_timer(&local->passive_scan_timer); + } + break; + + case PRISM2_PARAM_ENH_SEC: + if (value < 0 || value > 3) { + ret = -EINVAL; + break; + } + local->enh_sec = value; + if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, + local->enh_sec) || + local->func->reset_port(dev)) { + printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " + "1.6.3 or newer\n", dev->name); + ret = -EOPNOTSUPP; + } + break; + +#ifdef PRISM2_IO_DEBUG + case PRISM2_PARAM_IO_DEBUG: + local->io_debug_enabled = value; + break; +#endif /* PRISM2_IO_DEBUG */ + + case PRISM2_PARAM_BASIC_RATES: + if ((value & local->tx_rate_control) != value || value == 0) { + printk(KERN_INFO "%s: invalid basic rate set - basic " + "rates must be in supported rate set\n", + dev->name); + ret = -EINVAL; + break; + } + local->basic_rates = value; + if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + local->basic_rates) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_OPER_RATES: + local->tx_rate_control = value; + if (hostap_set_rate(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_HOSTAPD: + ret = hostap_set_hostapd(local, value, 1); + break; + + case PRISM2_PARAM_HOSTAPD_STA: + ret = hostap_set_hostapd_sta(local, value, 1); + break; + + case PRISM2_PARAM_WPA: + local->wpa = value; + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + ret = -EOPNOTSUPP; + else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, + value ? 1 : 0)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_PRIVACY_INVOKED: + local->privacy_invoked = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_TKIP_COUNTERMEASURES: + local->tkip_countermeasures = value; + break; + + case PRISM2_PARAM_DROP_UNENCRYPTED: + local->drop_unencrypted = value; + break; + + case PRISM2_PARAM_SCAN_CHANNEL_MASK: + local->scan_channel_mask = value; + break; + + default: + printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", + dev->name, param); + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + + +static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int *param = (int *) extra; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + switch (*param) { + case PRISM2_PARAM_TXRATECTRL: + *param = local->fw_tx_rate_control; + break; + + case PRISM2_PARAM_BEACON_INT: + *param = local->beacon_int; + break; + + case PRISM2_PARAM_PSEUDO_IBSS: + *param = local->pseudo_adhoc; + break; + + case PRISM2_PARAM_ALC: + ret = -EOPNOTSUPP; /* FIX */ + break; + + case PRISM2_PARAM_DUMP: + *param = local->frame_dump; + break; + + case PRISM2_PARAM_OTHER_AP_POLICY: + if (local->ap != NULL) + *param = local->ap->ap_policy; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_MAX_INACTIVITY: + if (local->ap != NULL) + *param = local->ap->max_inactivity / HZ; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_BRIDGE_PACKETS: + if (local->ap != NULL) + *param = local->ap->bridge_packets; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_DTIM_PERIOD: + *param = local->dtim_period; + break; + + case PRISM2_PARAM_AP_NULLFUNC_ACK: + if (local->ap != NULL) + *param = local->ap->nullfunc_ack; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_MAX_WDS: + *param = local->wds_max_connections; + break; + + case PRISM2_PARAM_AP_AUTOM_AP_WDS: + if (local->ap != NULL) + *param = local->ap->autom_ap_wds; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_AUTH_ALGS: + *param = local->auth_algs; + break; + + case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: + *param = local->monitor_allow_fcserr; + break; + + case PRISM2_PARAM_HOST_ENCRYPT: + *param = local->host_encrypt; + break; + + case PRISM2_PARAM_HOST_DECRYPT: + *param = local->host_decrypt; + break; + + case PRISM2_PARAM_HOST_ROAMING: + *param = local->host_roaming; + break; + + case PRISM2_PARAM_BCRX_STA_KEY: + *param = local->bcrx_sta_key; + break; + + case PRISM2_PARAM_IEEE_802_1X: + *param = local->ieee_802_1x; + break; + + case PRISM2_PARAM_ANTSEL_TX: + *param = local->antsel_tx; + break; + + case PRISM2_PARAM_ANTSEL_RX: + *param = local->antsel_rx; + break; + + case PRISM2_PARAM_MONITOR_TYPE: + *param = local->monitor_type; + break; + + case PRISM2_PARAM_WDS_TYPE: + *param = local->wds_type; + break; + + case PRISM2_PARAM_HOSTSCAN: + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_SCAN: + *param = local->passive_scan_interval; + break; + + case PRISM2_PARAM_ENH_SEC: + *param = local->enh_sec; + break; + +#ifdef PRISM2_IO_DEBUG + case PRISM2_PARAM_IO_DEBUG: + *param = local->io_debug_enabled; + break; +#endif /* PRISM2_IO_DEBUG */ + + case PRISM2_PARAM_BASIC_RATES: + *param = local->basic_rates; + break; + + case PRISM2_PARAM_OPER_RATES: + *param = local->tx_rate_control; + break; + + case PRISM2_PARAM_HOSTAPD: + *param = local->hostapd; + break; + + case PRISM2_PARAM_HOSTAPD_STA: + *param = local->hostapd_sta; + break; + + case PRISM2_PARAM_WPA: + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + ret = -EOPNOTSUPP; + *param = local->wpa; + break; + + case PRISM2_PARAM_PRIVACY_INVOKED: + *param = local->privacy_invoked; + break; + + case PRISM2_PARAM_TKIP_COUNTERMEASURES: + *param = local->tkip_countermeasures; + break; + + case PRISM2_PARAM_DROP_UNENCRYPTED: + *param = local->drop_unencrypted; + break; + + case PRISM2_PARAM_SCAN_CHANNEL_MASK: + *param = local->scan_channel_mask; + break; + + default: + printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", + dev->name, *param); + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + + +static int prism2_ioctl_priv_readmif(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 resp0; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL, + &resp0)) + return -EOPNOTSUPP; + else + *extra = resp0; + + return 0; +} + + +static int prism2_ioctl_priv_writemif(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 cr, val; + + iface = netdev_priv(dev); + local = iface->local; + + cr = *extra; + val = *(extra + 1); + if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL)) + return -EOPNOTSUPP; + + return 0; +} + + +static int prism2_ioctl_priv_monitor(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + u32 mode; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_DEBUG "%s: process %d (%s) used deprecated iwpriv monitor " + "- update software to use iwconfig mode monitor\n", + dev->name, current->pid, current->comm); + + /* Backward compatibility code - this can be removed at some point */ + + if (*i == 0) { + /* Disable monitor mode - old mode was not saved, so go to + * Master mode */ + mode = IW_MODE_MASTER; + ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); + } else if (*i == 1) { + /* netlink socket mode is not supported anymore since it did + * not separate different devices from each other and was not + * best method for delivering large amount of packets to + * user space */ + ret = -EOPNOTSUPP; + } else if (*i == 2 || *i == 3) { + switch (*i) { + case 2: + local->monitor_type = PRISM2_MONITOR_80211; + break; + case 3: + local->monitor_type = PRISM2_MONITOR_PRISM; + break; + } + mode = IW_MODE_MONITOR; + ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); + hostap_monitor_mode_enable(local); + } else + ret = -EINVAL; + + return ret; +} + + +static int prism2_ioctl_priv_reset(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_DEBUG "%s: manual reset request(%d)\n", dev->name, *i); + switch (*i) { + case 0: + /* Disable and enable card */ + local->func->hw_shutdown(dev, 1); + local->func->hw_config(dev, 0); + break; + + case 1: + /* COR sreset */ + local->func->hw_reset(dev); + break; + + case 2: + /* Disable and enable port 0 */ + local->func->reset_port(dev); + break; + + case 3: + prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); + if (local->func->cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, + NULL)) + return -EINVAL; + break; + + case 4: + if (local->func->cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, + NULL)) + return -EINVAL; + break; + + default: + printk(KERN_DEBUG "Unknown reset request %d\n", *i); + return -EOPNOTSUPP; + } + + return 0; +} + + +static int prism2_ioctl_priv_set_rid_word(struct net_device *dev, int *i) +{ + int rid = *i; + int value = *(i + 1); + + printk(KERN_DEBUG "%s: Set RID[0x%X] = %d\n", dev->name, rid, value); + + if (hostap_set_word(dev, rid, value)) + return -EINVAL; + + return 0; +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static int ap_mac_cmd_ioctl(local_info_t *local, int *cmd) +{ + int ret = 0; + + switch (*cmd) { + case AP_MAC_CMD_POLICY_OPEN: + local->ap->mac_restrictions.policy = MAC_POLICY_OPEN; + break; + case AP_MAC_CMD_POLICY_ALLOW: + local->ap->mac_restrictions.policy = MAC_POLICY_ALLOW; + break; + case AP_MAC_CMD_POLICY_DENY: + local->ap->mac_restrictions.policy = MAC_POLICY_DENY; + break; + case AP_MAC_CMD_FLUSH: + ap_control_flush_macs(&local->ap->mac_restrictions); + break; + case AP_MAC_CMD_KICKALL: + ap_control_kickall(local->ap); + hostap_deauth_all_stas(local->dev, local->ap, 0); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +#ifdef PRISM2_DOWNLOAD_SUPPORT +static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) +{ + struct prism2_download_param *param; + int ret = 0; + + if (p->length < sizeof(struct prism2_download_param) || + p->length > 1024 || !p->pointer) + return -EINVAL; + + param = (struct prism2_download_param *) + kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)) { + ret = -EFAULT; + goto out; + } + + if (p->length < sizeof(struct prism2_download_param) + + param->num_areas * sizeof(struct prism2_download_area)) { + ret = -EINVAL; + goto out; + } + + ret = local->func->download(local, param); + + out: + if (param != NULL) + kfree(param); + + return ret; +} +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + +static int prism2_set_genericelement(struct net_device *dev, u8 *elem, + size_t len) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + u8 *buf; + + /* + * Add 16-bit length in the beginning of the buffer because Prism2 RID + * includes it. + */ + buf = kmalloc(len + 2, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + *((u16 *) buf) = cpu_to_le16(len); + memcpy(buf + 2, elem, len); + + kfree(local->generic_elem); + local->generic_elem = buf; + local->generic_elem_len = len + 2; + + return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT, + buf, len + 2); +} + + +static int prism2_ioctl_siwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + + switch (data->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + /* + * Host AP driver does not use these parameters and allows + * wpa_supplicant to control them internally. + */ + break; + case IW_AUTH_TKIP_COUNTERMEASURES: + local->tkip_countermeasures = data->value; + break; + case IW_AUTH_DROP_UNENCRYPTED: + local->drop_unencrypted = data->value; + break; + case IW_AUTH_80211_AUTH_ALG: + local->auth_algs = data->value; + break; + case IW_AUTH_WPA_ENABLED: + if (data->value == 0) { + local->wpa = 0; + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + break; + prism2_set_genericelement(dev, "", 0); + local->host_roaming = 0; + local->privacy_invoked = 0; + if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, + 0) || + hostap_set_roaming(local) || + hostap_set_encryption(local) || + local->func->reset_port(dev)) + return -EINVAL; + break; + } + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + return -EOPNOTSUPP; + local->host_roaming = 2; + local->privacy_invoked = 1; + local->wpa = 1; + if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) || + hostap_set_roaming(local) || + hostap_set_encryption(local) || + local->func->reset_port(dev)) + return -EINVAL; + break; + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + local->ieee_802_1x = data->value; + break; + case IW_AUTH_PRIVACY_INVOKED: + local->privacy_invoked = data->value; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + + +static int prism2_ioctl_giwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + + switch (data->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + /* + * Host AP driver does not use these parameters and allows + * wpa_supplicant to control them internally. + */ + return -EOPNOTSUPP; + case IW_AUTH_TKIP_COUNTERMEASURES: + data->value = local->tkip_countermeasures; + break; + case IW_AUTH_DROP_UNENCRYPTED: + data->value = local->drop_unencrypted; + break; + case IW_AUTH_80211_AUTH_ALG: + data->value = local->auth_algs; + break; + case IW_AUTH_WPA_ENABLED: + data->value = local->wpa; + break; + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + data->value = local->ieee_802_1x; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + + +static int prism2_ioctl_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; + int i, ret = 0; + struct ieee80211_crypto_ops *ops; + struct ieee80211_crypt_data **crypt; + void *sta_ptr; + u8 *addr; + const char *alg, *module; + + i = erq->flags & IW_ENCODE_INDEX; + if (i > WEP_KEYS) + return -EINVAL; + if (i < 1 || i > WEP_KEYS) + i = local->tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + addr = ext->addr.sa_data; + if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff && + addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) { + sta_ptr = NULL; + crypt = &local->crypt[i]; + } else { + if (i != 0) + return -EINVAL; + sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); + if (sta_ptr == NULL) { + if (local->iw_mode == IW_MODE_INFRA) { + /* + * TODO: add STA entry for the current AP so + * that unicast key can be used. For now, this + * is emulated by using default key idx 0. + */ + i = 0; + crypt = &local->crypt[i]; + } else + return -EINVAL; + } + } + + if ((erq->flags & IW_ENCODE_DISABLED) || + ext->alg == IW_ENCODE_ALG_NONE) { + if (*crypt) + prism2_crypt_delayed_deinit(local, crypt); + goto done; + } + + switch (ext->alg) { + case IW_ENCODE_ALG_WEP: + alg = "WEP"; + module = "ieee80211_crypt_wep"; + break; + case IW_ENCODE_ALG_TKIP: + alg = "TKIP"; + module = "ieee80211_crypt_tkip"; + break; + case IW_ENCODE_ALG_CCMP: + alg = "CCMP"; + module = "ieee80211_crypt_ccmp"; + break; + default: + printk(KERN_DEBUG "%s: unsupported algorithm %d\n", + local->dev->name, ext->alg); + ret = -EOPNOTSUPP; + goto done; + } + + ops = ieee80211_get_crypto_ops(alg); + if (ops == NULL) { + request_module(module); + ops = ieee80211_get_crypto_ops(alg); + } + if (ops == NULL) { + printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", + local->dev->name, alg); + ret = -EOPNOTSUPP; + goto done; + } + + if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) { + /* + * Per station encryption and other than WEP algorithms + * require host-based encryption, so force them on + * automatically. + */ + local->host_decrypt = local->host_encrypt = 1; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct ieee80211_crypt_data *new_crypt; + + prism2_crypt_delayed_deinit(local, crypt); + + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(struct ieee80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ops; + new_crypt->priv = new_crypt->ops->init(i); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + /* + * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the + * existing seq# should not be changed. + * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq# + * should be changed to something else than zero. + */ + if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0) + && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, + (*crypt)->priv) < 0) { + printk(KERN_DEBUG "%s: key setting failed\n", + local->dev->name); + ret = -EINVAL; + goto done; + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + if (!sta_ptr) + local->tx_keyidx = i; + else if (i) { + ret = -EINVAL; + goto done; + } + } + + + if (sta_ptr == NULL && ext->key_len > 0) { + int first = 1, j; + for (j = 0; j < WEP_KEYS; j++) { + if (j != i && local->crypt[j]) { + first = 0; + break; + } + } + if (first) + local->tx_keyidx = i; + } + + done: + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + local->open_wep = erq->flags & IW_ENCODE_OPEN; + + /* + * Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. + */ + if (ret == 0 && + (hostap_set_encryption(local) || + (local->iw_mode != IW_MODE_INFRA && + local->func->reset_port(local->dev)))) + ret = -EINVAL; + + return ret; +} + + +static int prism2_ioctl_giwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + struct ieee80211_crypt_data **crypt; + void *sta_ptr; + int max_key_len, i; + struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; + u8 *addr; + + max_key_len = erq->length - sizeof(*ext); + if (max_key_len < 0) + return -EINVAL; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > WEP_KEYS) + i = local->tx_keyidx; + else + i--; + + addr = ext->addr.sa_data; + if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff && + addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) { + sta_ptr = NULL; + crypt = &local->crypt[i]; + } else { + i = 0; + sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); + if (sta_ptr == NULL) + return -EINVAL; + } + erq->flags = i + 1; + memset(ext, 0, sizeof(*ext)); + + if (*crypt == NULL || (*crypt)->ops == NULL) { + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + erq->flags |= IW_ENCODE_DISABLED; + } else { + if (strcmp((*crypt)->ops->name, "WEP") == 0) + ext->alg = IW_ENCODE_ALG_WEP; + else if (strcmp((*crypt)->ops->name, "TKIP") == 0) + ext->alg = IW_ENCODE_ALG_TKIP; + else if (strcmp((*crypt)->ops->name, "CCMP") == 0) + ext->alg = IW_ENCODE_ALG_CCMP; + else + return -EINVAL; + + if ((*crypt)->ops->get_key) { + ext->key_len = + (*crypt)->ops->get_key(ext->key, + max_key_len, + ext->tx_seq, + (*crypt)->priv); + if (ext->key_len && + (ext->alg == IW_ENCODE_ALG_TKIP || + ext->alg == IW_ENCODE_ALG_CCMP)) + ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; + } + } + + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + return 0; +} + + +static int prism2_ioctl_set_encryption(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int ret = 0; + struct ieee80211_crypto_ops *ops; + struct ieee80211_crypt_data **crypt; + void *sta_ptr; + + param->u.crypt.err = 0; + param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0'; + + if (param_len != + (int) ((char *) param->u.crypt.key - (char *) param) + + param->u.crypt.key_len) + return -EINVAL; + + if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && + param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && + param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { + if (param->u.crypt.idx >= WEP_KEYS) + return -EINVAL; + sta_ptr = NULL; + crypt = &local->crypt[param->u.crypt.idx]; + } else { + if (param->u.crypt.idx) + return -EINVAL; + sta_ptr = ap_crypt_get_ptrs( + local->ap, param->sta_addr, + (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT), + &crypt); + + if (sta_ptr == NULL) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; + return -EINVAL; + } + } + + if (strcmp(param->u.crypt.alg, "none") == 0) { + if (crypt) + prism2_crypt_delayed_deinit(local, crypt); + goto done; + } + + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { + request_module("ieee80211_crypt_wep"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { + request_module("ieee80211_crypt_tkip"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { + request_module("ieee80211_crypt_ccmp"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } + if (ops == NULL) { + printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", + local->dev->name, param->u.crypt.alg); + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG; + ret = -EINVAL; + goto done; + } + + /* station based encryption and other than WEP algorithms require + * host-based encryption, so force them on automatically */ + local->host_decrypt = local->host_encrypt = 1; + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct ieee80211_crypt_data *new_crypt; + + prism2_crypt_delayed_deinit(local, crypt); + + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(struct ieee80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ops; + new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + param->u.crypt.err = + HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED; + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) || + param->u.crypt.key_len > 0) && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(param->u.crypt.key, + param->u.crypt.key_len, param->u.crypt.seq, + (*crypt)->priv) < 0) { + printk(KERN_DEBUG "%s: key setting failed\n", + local->dev->name); + param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + + if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) { + if (!sta_ptr) + local->tx_keyidx = param->u.crypt.idx; + else if (param->u.crypt.idx) { + printk(KERN_DEBUG "%s: TX key idx setting failed\n", + local->dev->name); + param->u.crypt.err = + HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + } + + done: + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + /* Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. */ + if (ret == 0 && + (hostap_set_encryption(local) || + (local->iw_mode != IW_MODE_INFRA && + local->func->reset_port(local->dev)))) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED; + return -EINVAL; + } + + return ret; +} + + +static int prism2_ioctl_get_encryption(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + struct ieee80211_crypt_data **crypt; + void *sta_ptr; + int max_key_len; + + param->u.crypt.err = 0; + + max_key_len = param_len - + (int) ((char *) param->u.crypt.key - (char *) param); + if (max_key_len < 0) + return -EINVAL; + + if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && + param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && + param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { + sta_ptr = NULL; + if (param->u.crypt.idx >= WEP_KEYS) + param->u.crypt.idx = local->tx_keyidx; + crypt = &local->crypt[param->u.crypt.idx]; + } else { + param->u.crypt.idx = 0; + sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0, + &crypt); + + if (sta_ptr == NULL) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; + return -EINVAL; + } + } + + if (*crypt == NULL || (*crypt)->ops == NULL) { + memcpy(param->u.crypt.alg, "none", 5); + param->u.crypt.key_len = 0; + param->u.crypt.idx = 0xff; + } else { + strncpy(param->u.crypt.alg, (*crypt)->ops->name, + HOSTAP_CRYPT_ALG_NAME_LEN); + param->u.crypt.key_len = 0; + + memset(param->u.crypt.seq, 0, 8); + if ((*crypt)->ops->get_key) { + param->u.crypt.key_len = + (*crypt)->ops->get_key(param->u.crypt.key, + max_key_len, + param->u.crypt.seq, + (*crypt)->priv); + } + } + + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + return 0; +} + + +static int prism2_ioctl_get_rid(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len, res; + + max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; + if (max_len < 0) + return -EINVAL; + + res = local->func->get_rid(local->dev, param->u.rid.rid, + param->u.rid.data, param->u.rid.len, 0); + if (res >= 0) { + param->u.rid.len = res; + return 0; + } + + return res; +} + + +static int prism2_ioctl_set_rid(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len; + + max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; + if (max_len < 0 || max_len < param->u.rid.len) + return -EINVAL; + + return local->func->set_rid(local->dev, param->u.rid.rid, + param->u.rid.data, param->u.rid.len); +} + + +static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + printk(KERN_DEBUG "%ssta: associated as client with AP " MACSTR "\n", + local->dev->name, MAC2STR(param->sta_addr)); + memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN); + return 0; +} + + +static int prism2_ioctl_siwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + return prism2_set_genericelement(dev, extra, data->length); +} + + +static int prism2_ioctl_giwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + int len = local->generic_elem_len - 2; + + if (len <= 0 || local->generic_elem == NULL) { + data->length = 0; + return 0; + } + + if (data->length < len) + return -E2BIG; + + data->length = len; + memcpy(extra, local->generic_elem + 2, len); + + return 0; +} + + +static int prism2_ioctl_set_generic_element(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len, len; + + len = param->u.generic_elem.len; + max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; + if (max_len < 0 || max_len < len) + return -EINVAL; + + return prism2_set_genericelement(local->dev, + param->u.generic_elem.data, len); +} + + +static int prism2_ioctl_siwmlme(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface = dev->priv; + local_info_t *local = iface->local; + struct iw_mlme *mlme = (struct iw_mlme *) extra; + u16 reason; + + reason = cpu_to_le16(mlme->reason_code); + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + return prism2_sta_send_mgmt(local, mlme->addr.sa_data, + IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + case IW_MLME_DISASSOC: + return prism2_sta_send_mgmt(local, mlme->addr.sa_data, + IEEE80211_STYPE_DISASSOC, + (u8 *) &reason, 2); + default: + return -EOPNOTSUPP; + } +} + + +static int prism2_ioctl_mlme(local_info_t *local, + struct prism2_hostapd_param *param) +{ + u16 reason; + + reason = cpu_to_le16(param->u.mlme.reason_code); + switch (param->u.mlme.cmd) { + case MLME_STA_DEAUTH: + return prism2_sta_send_mgmt(local, param->sta_addr, + IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + case MLME_STA_DISASSOC: + return prism2_sta_send_mgmt(local, param->sta_addr, + IEEE80211_STYPE_DISASSOC, + (u8 *) &reason, 2); + default: + return -EOPNOTSUPP; + } +} + + +static int prism2_ioctl_scan_req(local_info_t *local, + struct prism2_hostapd_param *param) +{ +#ifndef PRISM2_NO_STATION_MODES + if ((local->iw_mode != IW_MODE_INFRA && + local->iw_mode != IW_MODE_ADHOC) || + (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))) + return -EOPNOTSUPP; + + if (!local->dev_enabled) + return -ENETDOWN; + + return prism2_request_hostscan(local->dev, param->u.scan_req.ssid, + param->u.scan_req.ssid_len); +#else /* PRISM2_NO_STATION_MODES */ + return -EOPNOTSUPP; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) +{ + struct prism2_hostapd_param *param; + int ret = 0; + int ap_ioctl = 0; + + if (p->length < sizeof(struct prism2_hostapd_param) || + p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) + return -EINVAL; + + param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)) { + ret = -EFAULT; + goto out; + } + + switch (param->cmd) { + case PRISM2_SET_ENCRYPTION: + ret = prism2_ioctl_set_encryption(local, param, p->length); + break; + case PRISM2_GET_ENCRYPTION: + ret = prism2_ioctl_get_encryption(local, param, p->length); + break; + case PRISM2_HOSTAPD_GET_RID: + ret = prism2_ioctl_get_rid(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_RID: + ret = prism2_ioctl_set_rid(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR: + ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: + ret = prism2_ioctl_set_generic_element(local, param, + p->length); + break; + case PRISM2_HOSTAPD_MLME: + ret = prism2_ioctl_mlme(local, param); + break; + case PRISM2_HOSTAPD_SCAN_REQ: + ret = prism2_ioctl_scan_req(local, param); + break; + default: + ret = prism2_hostapd(local->ap, param); + ap_ioctl = 1; + break; + } + + if (ret == 1 || !ap_ioctl) { + if (copy_to_user(p->pointer, param, p->length)) { + ret = -EFAULT; + goto out; + } else if (ap_ioctl) + ret = 0; + } + + out: + if (param != NULL) + kfree(param); + + return ret; +} + + +static void prism2_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + strncpy(info->driver, "hostap", sizeof(info->driver) - 1); + strncpy(info->version, PRISM2_VERSION, + sizeof(info->version) - 1); + snprintf(info->fw_version, sizeof(info->fw_version) - 1, + "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff, + (local->sta_fw_ver >> 8) & 0xff, + local->sta_fw_ver & 0xff); +} + +static struct ethtool_ops prism2_ethtool_ops = { + .get_drvinfo = prism2_get_drvinfo +}; + + +/* Structures to export the Wireless Handlers */ + +static const iw_handler prism2_handler[] = +{ + (iw_handler) NULL, /* SIOCSIWCOMMIT */ + (iw_handler) prism2_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) prism2_ioctl_siwfreq, /* SIOCSIWFREQ */ + (iw_handler) prism2_ioctl_giwfreq, /* SIOCGIWFREQ */ + (iw_handler) prism2_ioctl_siwmode, /* SIOCSIWMODE */ + (iw_handler) prism2_ioctl_giwmode, /* SIOCGIWMODE */ + (iw_handler) prism2_ioctl_siwsens, /* SIOCSIWSENS */ + (iw_handler) prism2_ioctl_giwsens, /* SIOCGIWSENS */ + (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */ + (iw_handler) prism2_ioctl_giwrange, /* SIOCGIWRANGE */ + (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ + (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ + iw_handler_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + (iw_handler) prism2_ioctl_siwap, /* SIOCSIWAP */ + (iw_handler) prism2_ioctl_giwap, /* SIOCGIWAP */ + (iw_handler) prism2_ioctl_siwmlme, /* SIOCSIWMLME */ + (iw_handler) prism2_ioctl_giwaplist, /* SIOCGIWAPLIST */ + (iw_handler) prism2_ioctl_siwscan, /* SIOCSIWSCAN */ + (iw_handler) prism2_ioctl_giwscan, /* SIOCGIWSCAN */ + (iw_handler) prism2_ioctl_siwessid, /* SIOCSIWESSID */ + (iw_handler) prism2_ioctl_giwessid, /* SIOCGIWESSID */ + (iw_handler) prism2_ioctl_siwnickn, /* SIOCSIWNICKN */ + (iw_handler) prism2_ioctl_giwnickn, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism2_ioctl_siwrate, /* SIOCSIWRATE */ + (iw_handler) prism2_ioctl_giwrate, /* SIOCGIWRATE */ + (iw_handler) prism2_ioctl_siwrts, /* SIOCSIWRTS */ + (iw_handler) prism2_ioctl_giwrts, /* SIOCGIWRTS */ + (iw_handler) prism2_ioctl_siwfrag, /* SIOCSIWFRAG */ + (iw_handler) prism2_ioctl_giwfrag, /* SIOCGIWFRAG */ + (iw_handler) prism2_ioctl_siwtxpow, /* SIOCSIWTXPOW */ + (iw_handler) prism2_ioctl_giwtxpow, /* SIOCGIWTXPOW */ + (iw_handler) prism2_ioctl_siwretry, /* SIOCSIWRETRY */ + (iw_handler) prism2_ioctl_giwretry, /* SIOCGIWRETRY */ + (iw_handler) prism2_ioctl_siwencode, /* SIOCSIWENCODE */ + (iw_handler) prism2_ioctl_giwencode, /* SIOCGIWENCODE */ + (iw_handler) prism2_ioctl_siwpower, /* SIOCSIWPOWER */ + (iw_handler) prism2_ioctl_giwpower, /* SIOCGIWPOWER */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism2_ioctl_siwgenie, /* SIOCSIWGENIE */ + (iw_handler) prism2_ioctl_giwgenie, /* SIOCGIWGENIE */ + (iw_handler) prism2_ioctl_siwauth, /* SIOCSIWAUTH */ + (iw_handler) prism2_ioctl_giwauth, /* SIOCGIWAUTH */ + (iw_handler) prism2_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */ + (iw_handler) prism2_ioctl_giwencodeext, /* SIOCGIWENCODEEXT */ + (iw_handler) NULL, /* SIOCSIWPMKSA */ + (iw_handler) NULL, /* -- hole -- */ +}; + +static const iw_handler prism2_private_handler[] = +{ /* SIOCIWFIRSTPRIV + */ + (iw_handler) prism2_ioctl_priv_prism2_param, /* 0 */ + (iw_handler) prism2_ioctl_priv_get_prism2_param, /* 1 */ + (iw_handler) prism2_ioctl_priv_writemif, /* 2 */ + (iw_handler) prism2_ioctl_priv_readmif, /* 3 */ +}; + +static const struct iw_handler_def hostap_iw_handler_def = +{ + .num_standard = sizeof(prism2_handler) / sizeof(iw_handler), + .num_private = sizeof(prism2_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(prism2_priv) / sizeof(struct iw_priv_args), + .standard = (iw_handler *) prism2_handler, + .private = (iw_handler *) prism2_private_handler, + .private_args = (struct iw_priv_args *) prism2_priv, + .get_wireless_stats = hostap_get_wireless_stats, +}; + + +int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct iwreq *wrq = (struct iwreq *) ifr; + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + switch (cmd) { + /* Private ioctls (iwpriv) that have not yet been converted + * into new wireless extensions API */ + + case PRISM2_IOCTL_INQUIRE: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_inquire(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_MONITOR: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_monitor(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_RESET: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_reset(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_WDS_ADD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_wds_add(local, wrq->u.ap_addr.sa_data, 1); + break; + + case PRISM2_IOCTL_WDS_DEL: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_wds_del(local, wrq->u.ap_addr.sa_data, 1, 0); + break; + + case PRISM2_IOCTL_SET_RID_WORD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_set_rid_word(dev, + (int *) wrq->u.name); + break; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + case PRISM2_IOCTL_MACCMD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_mac_cmd_ioctl(local, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_ADDMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_add_mac(&local->ap->mac_restrictions, + wrq->u.ap_addr.sa_data); + break; + case PRISM2_IOCTL_DELMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_del_mac(&local->ap->mac_restrictions, + wrq->u.ap_addr.sa_data); + break; + case PRISM2_IOCTL_KICKMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_kick_mac(local->ap, local->dev, + wrq->u.ap_addr.sa_data); + break; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + + /* Private ioctls that are not used with iwpriv; + * in SIOCDEVPRIVATE range */ + +#ifdef PRISM2_DOWNLOAD_SUPPORT + case PRISM2_IOCTL_DOWNLOAD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_download(local, &wrq->u.data); + break; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + case PRISM2_IOCTL_HOSTAPD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data); + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c new file mode 100644 index 00000000000..025f8cdb556 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -0,0 +1,473 @@ +#define PRISM2_PCI + +/* Host AP driver's support for Intersil Prism2.5 PCI cards is based on + * driver patches from Reyk Floeter <reyk@vantronix.net> and + * Andy Warner <andyw@pobox.com> */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/if.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)"; +static char *dev_info = "hostap_pci"; + + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN " + "PCI cards."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + + +/* struct local_info::hw_priv */ +struct hostap_pci_priv { + void __iomem *mem_start; +}; + + +/* FIX: do we need mb/wmb/rmb with memory operations? */ + + +static struct pci_device_id prism2_pci_id_table[] __devinitdata = { + /* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */ + { 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, + /* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */ + { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, + /* Samsung MagicLAN SWL-2210P */ + { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, + { 0 } +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + writeb(v, hw_priv->mem_start + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = readb(hw_priv->mem_start + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + writew(v, hw_priv->mem_start + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = readw(hw_priv->mem_start + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTW_DATA(v,a) hfa384x_outw_debug(dev, (a), cpu_to_le16((v))) +#define HFA384X_INW_DATA(a) (u16) le16_to_cpu(hfa384x_inw_debug(dev, (a))) + +#else /* PRISM2_IO_DEBUG */ + +static inline void hfa384x_outb(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + writeb(v, hw_priv->mem_start + a); +} + +static inline u8 hfa384x_inb(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + return readb(hw_priv->mem_start + a); +} + +static inline void hfa384x_outw(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + writew(v, hw_priv->mem_start + a); +} + +static inline u16 hfa384x_inw(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + return readw(hw_priv->mem_start + a); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw(dev, (a)) +#define HFA384X_OUTW_DATA(v,a) hfa384x_outw(dev, (a), cpu_to_le16((v))) +#define HFA384X_INW_DATA(a) (u16) le16_to_cpu(hfa384x_inw(dev, (a))) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + for ( ; len > 1; len -= 2) + *pos++ = HFA384X_INW_DATA(d_off); + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + for ( ; len > 1; len -= 2) + HFA384X_OUTW_DATA(*pos++, d_off); + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + +static void prism2_pci_cor_sreset(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 reg; + + reg = HFA384X_INB(HFA384X_PCICOR_OFF); + printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg); + + /* linux-wlan-ng uses extremely long hold and settle times for + * COR sreset. A comment in the driver code mentions that the long + * delays appear to be necessary. However, at least IBM 22P6901 seems + * to work fine with shorter delays. + * + * Longer delays can be configured by uncommenting following line: */ +/* #define PRISM2_PCI_USE_LONG_DELAYS */ + +#ifdef PRISM2_PCI_USE_LONG_DELAYS + int i; + + HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); + mdelay(250); + + HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); + mdelay(500); + + /* Wait for f/w to complete initialization (CMD:BUSY == 0) */ + i = 2000000 / 10; + while ((HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) && --i) + udelay(10); + +#else /* PRISM2_PCI_USE_LONG_DELAYS */ + + HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); + mdelay(2); + HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); + mdelay(2); + +#endif /* PRISM2_PCI_USE_LONG_DELAYS */ + + if (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) { + printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name); + } +} + + +static void prism2_pci_genesis_reset(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + + HFA384X_OUTW(0x00C5, HFA384X_PCICOR_OFF); + mdelay(10); + HFA384X_OUTW(hcr, HFA384X_PCIHCR_OFF); + mdelay(10); + HFA384X_OUTW(0x0045, HFA384X_PCICOR_OFF); + mdelay(10); +} + + +static struct prism2_helper_functions prism2_pci_funcs = +{ + .card_present = NULL, + .cor_sreset = prism2_pci_cor_sreset, + .dev_open = NULL, + .dev_close = NULL, + .genesis_reset = prism2_pci_genesis_reset, + .hw_type = HOSTAP_HW_PCI, +}; + + +static int prism2_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned long phymem; + void __iomem *mem = NULL; + local_info_t *local = NULL; + struct net_device *dev = NULL; + static int cards_found /* = 0 */; + int irq_registered = 0; + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + + hw_priv = kmalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) + return -ENOMEM; + memset(hw_priv, 0, sizeof(*hw_priv)); + + if (pci_enable_device(pdev)) + return -EIO; + + phymem = pci_resource_start(pdev, 0); + + if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) { + printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n"); + goto err_out_disable; + } + + mem = ioremap(phymem, pci_resource_len(pdev, 0)); + if (mem == NULL) { + printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ; + goto fail; + } + + dev = prism2_init_local_data(&prism2_pci_funcs, cards_found, + &pdev->dev); + if (dev == NULL) + goto fail; + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + cards_found++; + + dev->irq = pdev->irq; + hw_priv->mem_start = mem; + + prism2_pci_cor_sreset(local); + + pci_set_drvdata(pdev, dev); + + if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name, + dev)) { + printk(KERN_WARNING "%s: request_irq failed\n", dev->name); + goto fail; + } else + irq_registered = 1; + + if (!local->pri_only && prism2_hw_config(dev, 1)) { + printk(KERN_DEBUG "%s: hardware initialization failed\n", + dev_info); + goto fail; + } + + printk(KERN_INFO "%s: Intersil Prism2.5 PCI: " + "mem=0x%lx, irq=%d\n", dev->name, phymem, dev->irq); + + return hostap_hw_ready(dev); + + fail: + kfree(hw_priv); + + if (irq_registered && dev) + free_irq(dev->irq, dev); + + if (mem) + iounmap(mem); + + release_mem_region(phymem, pci_resource_len(pdev, 0)); + + err_out_disable: + pci_disable_device(pdev); + kfree(hw_priv); + if (local) + local->hw_priv = NULL; + prism2_free_local_data(dev); + + return -ENODEV; +} + + +static void prism2_pci_remove(struct pci_dev *pdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + void __iomem *mem_start; + struct hostap_pci_priv *hw_priv; + + dev = pci_get_drvdata(pdev); + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + + /* Reset the hardware, and ensure interrupts are disabled. */ + prism2_pci_cor_sreset(iface->local); + hfa384x_disable_interrupts(dev); + + if (dev->irq) + free_irq(dev->irq, dev); + + mem_start = hw_priv->mem_start; + kfree(hw_priv); + iface->local->hw_priv = NULL; + prism2_free_local_data(dev); + + iounmap(mem_start); + + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); +} + + +#ifdef CONFIG_PM +static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (netif_running(dev)) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + prism2_suspend(dev); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int prism2_pci_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + pci_enable_device(pdev); + pci_restore_state(pdev); + prism2_hw_config(dev, 0); + if (netif_running(dev)) { + netif_device_attach(dev); + netif_start_queue(dev); + } + + return 0; +} +#endif /* CONFIG_PM */ + + +MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); + +static struct pci_driver prism2_pci_drv_id = { + .name = "prism2_pci", + .id_table = prism2_pci_id_table, + .probe = prism2_pci_probe, + .remove = prism2_pci_remove, +#ifdef CONFIG_PM + .suspend = prism2_pci_suspend, + .resume = prism2_pci_resume, +#endif /* CONFIG_PM */ + /* Linux 2.4.6 added save_state and enable_wake that are not used here + */ +}; + + +static int __init init_prism2_pci(void) +{ + printk(KERN_INFO "%s: %s\n", dev_info, version); + + return pci_register_driver(&prism2_pci_drv_id); +} + + +static void __exit exit_prism2_pci(void) +{ + pci_unregister_driver(&prism2_pci_drv_id); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); +} + + +module_init(init_prism2_pci); +module_exit(exit_prism2_pci); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c new file mode 100644 index 00000000000..474ef83d813 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -0,0 +1,645 @@ +#define PRISM2_PLX + +/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is + * based on: + * - Host AP driver patch from james@madingley.org + * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc. + */ + + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/if.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)"; +static char *dev_info = "hostap_plx"; + + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " + "cards (PLX)."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + + +static int ignore_cis; +module_param(ignore_cis, int, 0444); +MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS"); + + +/* struct local_info::hw_priv */ +struct hostap_plx_priv { + void __iomem *attr_mem; + unsigned int cor_offset; +}; + + +#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */ +#define COR_SRESET 0x80 +#define COR_LEVLREQ 0x40 +#define COR_ENABLE_FUNC 0x01 +/* PCI Configuration Registers */ +#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */ +/* Local Configuration Registers */ +#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */ +#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */ +#define PLX_CNTRL 0x50 +#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28) + + +#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID } + +static struct pci_device_id prism2_plx_id_table[] __devinitdata = { + PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), + PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), + PLXDEV(0x126c, 0x8030, "Nortel emobility"), + PLXDEV(0x1385, 0x4100, "Netgear MA301"), + PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), + PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), + PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), + PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), + PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), + PLXDEV(0x16ab, 0x1103, "Longshine 8031"), + PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"), + PLXDEV(0xec80, 0xec00, "Belkin F5D6000"), + { 0 } +}; + + +/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid + * is not listed here, you will need to add it here to get the driver + * initialized. */ +static struct prism2_plx_manfid { + u16 manfid1, manfid2; +} prism2_plx_known_manfids[] = { + { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */, + { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */, + { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */, + { 0x0126, 0x8000 } /* Proxim RangeLAN */, + { 0x0138, 0x0002 } /* Compaq WL100 */, + { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */, + { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */, + { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */, + { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */, + { 0x028a, 0x0002 } /* D-Link DRC-650 */, + { 0x0250, 0x0002 } /* Samsung SWL2000-N */, + { 0xc250, 0x0002 } /* EMTAC A2424i */, + { 0xd601, 0x0002 } /* Z-Com XI300 */, + { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, + { 0, 0} +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + outb(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inb(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + outw(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inw(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outsw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); + outsw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline void hfa384x_insw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); + insw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) +#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) + +#else /* PRISM2_IO_DEBUG */ + +#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) +#define HFA384X_INB(a) inb(dev->base_addr + (a)) +#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) +#define HFA384X_INW(a) inw(dev->base_addr + (a)) +#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) +#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_INSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_OUTSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + + +static void prism2_plx_cor_sreset(local_info_t *local) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n", + dev_info); + + /* Set sreset bit of COR and clear it after hold time */ + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(2); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(2); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + } +} + + +static void prism2_plx_genesis_reset(local_info_t *local, int hcr) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(10); + outb(hcr, hw_priv->cor_offset + 2); + mdelay(10); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(10); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2); + mdelay(10); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + } +} + + +static struct prism2_helper_functions prism2_plx_funcs = +{ + .card_present = NULL, + .cor_sreset = prism2_plx_cor_sreset, + .dev_open = NULL, + .dev_close = NULL, + .genesis_reset = prism2_plx_genesis_reset, + .hw_type = HOSTAP_HW_PLX, +}; + + +static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, + unsigned int *cor_offset, + unsigned int *cor_index) +{ +#define CISTPL_CONFIG 0x1A +#define CISTPL_MANFID 0x20 +#define CISTPL_END 0xFF +#define CIS_MAX_LEN 256 + u8 *cis; + int i, pos; + unsigned int rmsz, rasz, manfid1, manfid2; + struct prism2_plx_manfid *manfid; + + cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL); + if (cis == NULL) + return -ENOMEM; + + /* read CIS; it is in even offsets in the beginning of attr_mem */ + for (i = 0; i < CIS_MAX_LEN; i++) + cis[i] = readb(attr_mem + 2 * i); + printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n", + dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]); + + /* set reasonable defaults for Prism2 cards just in case CIS parsing + * fails */ + *cor_offset = 0x3e0; + *cor_index = 0x01; + manfid1 = manfid2 = 0; + + pos = 0; + while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { + if (pos + cis[pos + 1] >= CIS_MAX_LEN) + goto cis_error; + + switch (cis[pos]) { + case CISTPL_CONFIG: + if (cis[pos + 1] < 1) + goto cis_error; + rmsz = (cis[pos + 2] & 0x3c) >> 2; + rasz = cis[pos + 2] & 0x03; + if (4 + rasz + rmsz > cis[pos + 1]) + goto cis_error; + *cor_index = cis[pos + 3] & 0x3F; + *cor_offset = 0; + for (i = 0; i <= rasz; i++) + *cor_offset += cis[pos + 4 + i] << (8 * i); + printk(KERN_DEBUG "%s: cor_index=0x%x " + "cor_offset=0x%x\n", dev_info, + *cor_index, *cor_offset); + if (*cor_offset > attr_len) { + printk(KERN_ERR "%s: COR offset not within " + "attr_mem\n", dev_info); + kfree(cis); + return -1; + } + break; + + case CISTPL_MANFID: + if (cis[pos + 1] < 4) + goto cis_error; + manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); + manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); + printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n", + dev_info, manfid1, manfid2); + break; + } + + pos += cis[pos + 1] + 2; + } + + if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END) + goto cis_error; + + for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++) + if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) { + kfree(cis); + return 0; + } + + printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is" + " not supported card\n", dev_info, manfid1, manfid2); + goto fail; + + cis_error: + printk(KERN_WARNING "%s: invalid CIS data\n", dev_info); + + fail: + kfree(cis); + if (ignore_cis) { + printk(KERN_INFO "%s: ignore_cis parameter set - ignoring " + "errors during CIS verification\n", dev_info); + return 0; + } + return -1; +} + + +static int prism2_plx_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned int pccard_ioaddr, plx_ioaddr; + unsigned long pccard_attr_mem; + unsigned int pccard_attr_len; + void __iomem *attr_mem = NULL; + unsigned int cor_offset, cor_index; + u32 reg; + local_info_t *local = NULL; + struct net_device *dev = NULL; + struct hostap_interface *iface; + static int cards_found /* = 0 */; + int irq_registered = 0; + int tmd7160; + struct hostap_plx_priv *hw_priv; + + hw_priv = kmalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) + return -ENOMEM; + memset(hw_priv, 0, sizeof(*hw_priv)); + + if (pci_enable_device(pdev)) + return -EIO; + + /* National Datacomm NCP130 based on TMD7160, not PLX9052. */ + tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131); + + plx_ioaddr = pci_resource_start(pdev, 1); + pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3); + + if (tmd7160) { + /* TMD7160 */ + attr_mem = NULL; /* no access to PC Card attribute memory */ + + printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, " + "irq=%d, pccard_io=0x%x\n", + plx_ioaddr, pdev->irq, pccard_ioaddr); + + cor_offset = plx_ioaddr; + cor_index = 0x04; + + outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr); + mdelay(1); + reg = inb(plx_ioaddr); + if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) { + printk(KERN_ERR "%s: Error setting COR (expected=" + "0x%02x, was=0x%02x)\n", dev_info, + cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg); + goto fail; + } + } else { + /* PLX9052 */ + pccard_attr_mem = pci_resource_start(pdev, 2); + pccard_attr_len = pci_resource_len(pdev, 2); + if (pccard_attr_len < PLX_MIN_ATTR_LEN) + goto fail; + + + attr_mem = ioremap(pccard_attr_mem, pccard_attr_len); + if (attr_mem == NULL) { + printk(KERN_ERR "%s: cannot remap attr_mem\n", + dev_info); + goto fail; + } + + printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: " + "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n", + pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr); + + if (prism2_plx_check_cis(attr_mem, pccard_attr_len, + &cor_offset, &cor_index)) { + printk(KERN_INFO "Unknown PC Card CIS - not a " + "Prism2/2.5 card?\n"); + goto fail; + } + + printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 " + "adapter\n"); + + /* Write COR to enable PC Card */ + writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, + attr_mem + cor_offset); + + /* Enable PCI interrupts if they are not already enabled */ + reg = inl(plx_ioaddr + PLX_INTCSR); + printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg); + if (!(reg & PLX_INTCSR_PCI_INTEN)) { + outl(reg | PLX_INTCSR_PCI_INTEN, + plx_ioaddr + PLX_INTCSR); + if (!(inl(plx_ioaddr + PLX_INTCSR) & + PLX_INTCSR_PCI_INTEN)) { + printk(KERN_WARNING "%s: Could not enable " + "Local Interrupts\n", dev_info); + goto fail; + } + } + + reg = inl(plx_ioaddr + PLX_CNTRL); + printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM " + "present=%d)\n", + reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0); + /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is + * not present; but are there really such cards in use(?) */ + } + + dev = prism2_init_local_data(&prism2_plx_funcs, cards_found, + &pdev->dev); + if (dev == NULL) + goto fail; + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + cards_found++; + + dev->irq = pdev->irq; + dev->base_addr = pccard_ioaddr; + hw_priv->attr_mem = attr_mem; + hw_priv->cor_offset = cor_offset; + + pci_set_drvdata(pdev, dev); + + if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name, + dev)) { + printk(KERN_WARNING "%s: request_irq failed\n", dev->name); + goto fail; + } else + irq_registered = 1; + + if (prism2_hw_config(dev, 1)) { + printk(KERN_DEBUG "%s: hardware initialization failed\n", + dev_info); + goto fail; + } + + return hostap_hw_ready(dev); + + fail: + kfree(hw_priv); + if (local) + local->hw_priv = NULL; + prism2_free_local_data(dev); + + if (irq_registered && dev) + free_irq(dev->irq, dev); + + if (attr_mem) + iounmap(attr_mem); + + pci_disable_device(pdev); + + return -ENODEV; +} + + +static void prism2_plx_remove(struct pci_dev *pdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct hostap_plx_priv *hw_priv; + + dev = pci_get_drvdata(pdev); + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + + /* Reset the hardware, and ensure interrupts are disabled. */ + prism2_plx_cor_sreset(iface->local); + hfa384x_disable_interrupts(dev); + + if (hw_priv->attr_mem) + iounmap(hw_priv->attr_mem); + if (dev->irq) + free_irq(dev->irq, dev); + + kfree(iface->local->hw_priv); + iface->local->hw_priv = NULL; + prism2_free_local_data(dev); + pci_disable_device(pdev); +} + + +MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); + +static struct pci_driver prism2_plx_drv_id = { + .name = "prism2_plx", + .id_table = prism2_plx_id_table, + .probe = prism2_plx_probe, + .remove = prism2_plx_remove, + .suspend = NULL, + .resume = NULL, + .enable_wake = NULL +}; + + +static int __init init_prism2_plx(void) +{ + printk(KERN_INFO "%s: %s\n", dev_info, version); + + return pci_register_driver(&prism2_plx_drv_id); +} + + +static void __exit exit_prism2_plx(void) +{ + pci_unregister_driver(&prism2_plx_drv_id); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); +} + + +module_init(init_prism2_plx); +module_exit(exit_prism2_plx); diff --git a/drivers/net/wireless/hostap/hostap_proc.c b/drivers/net/wireless/hostap/hostap_proc.c new file mode 100644 index 00000000000..a0a4cbd4937 --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_proc.c @@ -0,0 +1,448 @@ +/* /proc routines for Host AP driver */ + +#define PROC_LIMIT (PAGE_SIZE - 80) + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int prism2_debug_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + int i; + + if (off != 0) { + *eof = 1; + return 0; + } + + p += sprintf(p, "next_txfid=%d next_alloc=%d\n", + local->next_txfid, local->next_alloc); + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + p += sprintf(p, "FID: tx=%04X intransmit=%04X\n", + local->txfid[i], local->intransmitfid[i]); + p += sprintf(p, "FW TX rate control: %d\n", local->fw_tx_rate_control); + p += sprintf(p, "beacon_int=%d\n", local->beacon_int); + p += sprintf(p, "dtim_period=%d\n", local->dtim_period); + p += sprintf(p, "wds_max_connections=%d\n", + local->wds_max_connections); + p += sprintf(p, "dev_enabled=%d\n", local->dev_enabled); + p += sprintf(p, "sw_tick_stuck=%d\n", local->sw_tick_stuck); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt[i] && local->crypt[i]->ops) { + p += sprintf(p, "crypt[%d]=%s\n", + i, local->crypt[i]->ops->name); + } + } + p += sprintf(p, "pri_only=%d\n", local->pri_only); + p += sprintf(p, "pci=%d\n", local->func->hw_type == HOSTAP_HW_PCI); + p += sprintf(p, "sram_type=%d\n", local->sram_type); + p += sprintf(p, "no_pri=%d\n", local->no_pri); + + return (p - page); +} +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +static int prism2_stats_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + struct comm_tallies_sums *sums = (struct comm_tallies_sums *) + &local->comm_tallies; + + if (off != 0) { + *eof = 1; + return 0; + } + + p += sprintf(p, "TxUnicastFrames=%u\n", sums->tx_unicast_frames); + p += sprintf(p, "TxMulticastframes=%u\n", sums->tx_multicast_frames); + p += sprintf(p, "TxFragments=%u\n", sums->tx_fragments); + p += sprintf(p, "TxUnicastOctets=%u\n", sums->tx_unicast_octets); + p += sprintf(p, "TxMulticastOctets=%u\n", sums->tx_multicast_octets); + p += sprintf(p, "TxDeferredTransmissions=%u\n", + sums->tx_deferred_transmissions); + p += sprintf(p, "TxSingleRetryFrames=%u\n", + sums->tx_single_retry_frames); + p += sprintf(p, "TxMultipleRetryFrames=%u\n", + sums->tx_multiple_retry_frames); + p += sprintf(p, "TxRetryLimitExceeded=%u\n", + sums->tx_retry_limit_exceeded); + p += sprintf(p, "TxDiscards=%u\n", sums->tx_discards); + p += sprintf(p, "RxUnicastFrames=%u\n", sums->rx_unicast_frames); + p += sprintf(p, "RxMulticastFrames=%u\n", sums->rx_multicast_frames); + p += sprintf(p, "RxFragments=%u\n", sums->rx_fragments); + p += sprintf(p, "RxUnicastOctets=%u\n", sums->rx_unicast_octets); + p += sprintf(p, "RxMulticastOctets=%u\n", sums->rx_multicast_octets); + p += sprintf(p, "RxFCSErrors=%u\n", sums->rx_fcs_errors); + p += sprintf(p, "RxDiscardsNoBuffer=%u\n", + sums->rx_discards_no_buffer); + p += sprintf(p, "TxDiscardsWrongSA=%u\n", sums->tx_discards_wrong_sa); + p += sprintf(p, "RxDiscardsWEPUndecryptable=%u\n", + sums->rx_discards_wep_undecryptable); + p += sprintf(p, "RxMessageInMsgFragments=%u\n", + sums->rx_message_in_msg_fragments); + p += sprintf(p, "RxMessageInBadMsgFragments=%u\n", + sums->rx_message_in_bad_msg_fragments); + /* FIX: this may grow too long for one page(?) */ + + return (p - page); +} + + +static int prism2_wds_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + struct list_head *ptr; + struct hostap_interface *iface; + + if (off > PROC_LIMIT) { + *eof = 1; + return 0; + } + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + p += sprintf(p, "%s\t" MACSTR "\n", + iface->dev->name, + MAC2STR(iface->u.wds.remote_addr)); + if ((p - page) > PROC_LIMIT) { + printk(KERN_DEBUG "%s: wds proc did not fit\n", + local->dev->name); + break; + } + } + read_unlock_bh(&local->iface_lock); + + if ((p - page) <= off) { + *eof = 1; + return 0; + } + + *start = page + off; + + return (p - page - off); +} + + +static int prism2_bss_list_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + struct list_head *ptr; + struct hostap_bss_info *bss; + int i; + + if (off > PROC_LIMIT) { + *eof = 1; + return 0; + } + + p += sprintf(p, "#BSSID\tlast_update\tcount\tcapab_info\tSSID(txt)\t" + "SSID(hex)\tWPA IE\n"); + spin_lock_bh(&local->lock); + list_for_each(ptr, &local->bss_list) { + bss = list_entry(ptr, struct hostap_bss_info, list); + p += sprintf(p, MACSTR "\t%lu\t%u\t0x%x\t", + MAC2STR(bss->bssid), bss->last_update, + bss->count, bss->capab_info); + for (i = 0; i < bss->ssid_len; i++) { + p += sprintf(p, "%c", + bss->ssid[i] >= 32 && bss->ssid[i] < 127 ? + bss->ssid[i] : '_'); + } + p += sprintf(p, "\t"); + for (i = 0; i < bss->ssid_len; i++) { + p += sprintf(p, "%02x", bss->ssid[i]); + } + p += sprintf(p, "\t"); + for (i = 0; i < bss->wpa_ie_len; i++) { + p += sprintf(p, "%02x", bss->wpa_ie[i]); + } + p += sprintf(p, "\n"); + if ((p - page) > PROC_LIMIT) { + printk(KERN_DEBUG "%s: BSS proc did not fit\n", + local->dev->name); + break; + } + } + spin_unlock_bh(&local->lock); + + if ((p - page) <= off) { + *eof = 1; + return 0; + } + + *start = page + off; + + return (p - page - off); +} + + +static int prism2_crypt_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + int i; + + if (off > PROC_LIMIT) { + *eof = 1; + return 0; + } + + p += sprintf(p, "tx_keyidx=%d\n", local->tx_keyidx); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt[i] && local->crypt[i]->ops && + local->crypt[i]->ops->print_stats) { + p = local->crypt[i]->ops->print_stats( + p, local->crypt[i]->priv); + } + } + + if ((p - page) <= off) { + *eof = 1; + return 0; + } + + *start = page + off; + + return (p - page - off); +} + + +static int prism2_pda_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + local_info_t *local = (local_info_t *) data; + + if (local->pda == NULL || off >= PRISM2_PDA_SIZE) { + *eof = 1; + return 0; + } + + if (off + count > PRISM2_PDA_SIZE) + count = PRISM2_PDA_SIZE - off; + + memcpy(page, local->pda + off, count); + return count; +} + + +static int prism2_aux_dump_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + local_info_t *local = (local_info_t *) data; + + if (local->func->read_aux == NULL) { + *eof = 1; + return 0; + } + + if (local->func->read_aux(local->dev, off, count, page)) { + *eof = 1; + return 0; + } + *start = page; + + return count; +} + + +#ifdef PRISM2_IO_DEBUG +static int prism2_io_debug_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + local_info_t *local = (local_info_t *) data; + int head = local->io_debug_head; + int start_bytes, left, copy, copied; + + if (off + count > PRISM2_IO_DEBUG_SIZE * 4) { + *eof = 1; + if (off >= PRISM2_IO_DEBUG_SIZE * 4) + return 0; + count = PRISM2_IO_DEBUG_SIZE * 4 - off; + } + + copied = 0; + start_bytes = (PRISM2_IO_DEBUG_SIZE - head) * 4; + left = count; + + if (off < start_bytes) { + copy = start_bytes - off; + if (copy > count) + copy = count; + memcpy(page, ((u8 *) &local->io_debug[head]) + off, copy); + left -= copy; + if (left > 0) + memcpy(&page[copy], local->io_debug, left); + } else { + memcpy(page, ((u8 *) local->io_debug) + (off - start_bytes), + left); + } + + *start = page; + + return count; +} +#endif /* PRISM2_IO_DEBUG */ + + +#ifndef PRISM2_NO_STATION_MODES +static int prism2_scan_results_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + int entry, i, len, total = 0; + struct hfa384x_hostscan_result *scanres; + u8 *pos; + + p += sprintf(p, "CHID ANL SL BcnInt Capab Rate BSSID ATIM SupRates " + "SSID\n"); + + spin_lock_bh(&local->lock); + for (entry = 0; entry < local->last_scan_results_count; entry++) { + scanres = &local->last_scan_results[entry]; + + if (total + (p - page) <= off) { + total += p - page; + p = page; + } + if (total + (p - page) > off + count) + break; + if ((p - page) > (PAGE_SIZE - 200)) + break; + + p += sprintf(p, "%d %d %d %d 0x%02x %d " MACSTR " %d ", + le16_to_cpu(scanres->chid), + (s16) le16_to_cpu(scanres->anl), + (s16) le16_to_cpu(scanres->sl), + le16_to_cpu(scanres->beacon_interval), + le16_to_cpu(scanres->capability), + le16_to_cpu(scanres->rate), + MAC2STR(scanres->bssid), + le16_to_cpu(scanres->atim)); + + pos = scanres->sup_rates; + for (i = 0; i < sizeof(scanres->sup_rates); i++) { + if (pos[i] == 0) + break; + p += sprintf(p, "<%02x>", pos[i]); + } + p += sprintf(p, " "); + + pos = scanres->ssid; + len = le16_to_cpu(scanres->ssid_len); + if (len > 32) + len = 32; + for (i = 0; i < len; i++) { + unsigned char c = pos[i]; + if (c >= 32 && c < 127) + p += sprintf(p, "%c", c); + else + p += sprintf(p, "<%02x>", c); + } + p += sprintf(p, "\n"); + } + spin_unlock_bh(&local->lock); + + total += (p - page); + if (total >= off + count) + *eof = 1; + + if (total < off) { + *eof = 1; + return 0; + } + + len = total - off; + if (len > (p - page)) + len = p - page; + *start = p - len; + if (len > count) + len = count; + + return len; +} +#endif /* PRISM2_NO_STATION_MODES */ + + +void hostap_init_proc(local_info_t *local) +{ + local->proc = NULL; + + if (hostap_proc == NULL) { + printk(KERN_WARNING "%s: hostap proc directory not created\n", + local->dev->name); + return; + } + + local->proc = proc_mkdir(local->ddev->name, hostap_proc); + if (local->proc == NULL) { + printk(KERN_INFO "/proc/net/hostap/%s creation failed\n", + local->ddev->name); + return; + } + +#ifndef PRISM2_NO_PROCFS_DEBUG + create_proc_read_entry("debug", 0, local->proc, + prism2_debug_proc_read, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + create_proc_read_entry("stats", 0, local->proc, + prism2_stats_proc_read, local); + create_proc_read_entry("wds", 0, local->proc, + prism2_wds_proc_read, local); + create_proc_read_entry("pda", 0, local->proc, + prism2_pda_proc_read, local); + create_proc_read_entry("aux_dump", 0, local->proc, + prism2_aux_dump_proc_read, local); + create_proc_read_entry("bss_list", 0, local->proc, + prism2_bss_list_proc_read, local); + create_proc_read_entry("crypt", 0, local->proc, + prism2_crypt_proc_read, local); +#ifdef PRISM2_IO_DEBUG + create_proc_read_entry("io_debug", 0, local->proc, + prism2_io_debug_proc_read, local); +#endif /* PRISM2_IO_DEBUG */ +#ifndef PRISM2_NO_STATION_MODES + create_proc_read_entry("scan_results", 0, local->proc, + prism2_scan_results_proc_read, local); +#endif /* PRISM2_NO_STATION_MODES */ +} + + +void hostap_remove_proc(local_info_t *local) +{ + if (local->proc != NULL) { +#ifndef PRISM2_NO_STATION_MODES + remove_proc_entry("scan_results", local->proc); +#endif /* PRISM2_NO_STATION_MODES */ +#ifdef PRISM2_IO_DEBUG + remove_proc_entry("io_debug", local->proc); +#endif /* PRISM2_IO_DEBUG */ + remove_proc_entry("pda", local->proc); + remove_proc_entry("aux_dump", local->proc); + remove_proc_entry("wds", local->proc); + remove_proc_entry("stats", local->proc); + remove_proc_entry("bss_list", local->proc); + remove_proc_entry("crypt", local->proc); +#ifndef PRISM2_NO_PROCFS_DEBUG + remove_proc_entry("debug", local->proc); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + if (hostap_proc != NULL) + remove_proc_entry(local->proc->name, hostap_proc); + } +} + + +EXPORT_SYMBOL(hostap_init_proc); +EXPORT_SYMBOL(hostap_remove_proc); diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h new file mode 100644 index 00000000000..cc061e1560d --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -0,0 +1,1033 @@ +#ifndef HOSTAP_WLAN_H +#define HOSTAP_WLAN_H + +#include "hostap_config.h" +#include "hostap_common.h" + +#define MAX_PARM_DEVICES 8 +#define PARM_MIN_MAX "1-" __MODULE_STRING(MAX_PARM_DEVICES) +#define DEF_INTS -1, -1, -1, -1, -1, -1, -1 +#define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx] + + +/* Specific skb->protocol value that indicates that the packet already contains + * txdesc header. + * FIX: This might need own value that would be allocated especially for Prism2 + * txdesc; ETH_P_CONTROL is commented as "Card specific control frames". + * However, these skb's should have only minimal path in the kernel side since + * prism2_send_mgmt() sends these with dev_queue_xmit() to prism2_tx(). */ +#define ETH_P_HOSTAP ETH_P_CONTROL + +/* ARPHRD_IEEE80211_PRISM uses a bloated version of Prism2 RX frame header + * (from linux-wlan-ng) */ +struct linux_wlan_ng_val { + u32 did; + u16 status, len; + u32 data; +} __attribute__ ((packed)); + +struct linux_wlan_ng_prism_hdr { + u32 msgcode, msglen; + char devname[16]; + struct linux_wlan_ng_val hosttime, mactime, channel, rssi, sq, signal, + noise, rate, istx, frmlen; +} __attribute__ ((packed)); + +struct linux_wlan_ng_cap_hdr { + u32 version; + u32 length; + u64 mactime; + u64 hosttime; + u32 phytype; + u32 channel; + u32 datarate; + u32 antenna; + u32 priority; + u32 ssi_type; + s32 ssi_signal; + s32 ssi_noise; + u32 preamble; + u32 encoding; +} __attribute__ ((packed)); + +#define LWNG_CAP_DID_BASE (4 | (1 << 6)) /* section 4, group 1 */ +#define LWNG_CAPHDR_VERSION 0x80211001 + +struct hfa384x_rx_frame { + /* HFA384X RX frame descriptor */ + u16 status; /* HFA384X_RX_STATUS_ flags */ + u32 time; /* timestamp, 1 microsecond resolution */ + u8 silence; /* 27 .. 154; seems to be 0 */ + u8 signal; /* 27 .. 154 */ + u8 rate; /* 10, 20, 55, or 110 */ + u8 rxflow; + u32 reserved; + + /* 802.11 */ + u16 frame_control; + u16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + u16 seq_ctrl; + u8 addr4[6]; + u16 data_len; + + /* 802.3 */ + u8 dst_addr[6]; + u8 src_addr[6]; + u16 len; + + /* followed by frame data; max 2304 bytes */ +} __attribute__ ((packed)); + + +struct hfa384x_tx_frame { + /* HFA384X TX frame descriptor */ + u16 status; /* HFA384X_TX_STATUS_ flags */ + u16 reserved1; + u16 reserved2; + u32 sw_support; + u8 retry_count; /* not yet implemented */ + u8 tx_rate; /* Host AP only; 0 = firmware, or 10, 20, 55, 110 */ + u16 tx_control; /* HFA384X_TX_CTRL_ flags */ + + /* 802.11 */ + u16 frame_control; /* parts not used */ + u16 duration_id; + u8 addr1[6]; + u8 addr2[6]; /* filled by firmware */ + u8 addr3[6]; + u16 seq_ctrl; /* filled by firmware */ + u8 addr4[6]; + u16 data_len; + + /* 802.3 */ + u8 dst_addr[6]; + u8 src_addr[6]; + u16 len; + + /* followed by frame data; max 2304 bytes */ +} __attribute__ ((packed)); + + +struct hfa384x_rid_hdr +{ + u16 len; + u16 rid; +} __attribute__ ((packed)); + + +/* Macro for converting signal levels (range 27 .. 154) to wireless ext + * dBm value with some accuracy */ +#define HFA384X_LEVEL_TO_dBm(v) 0x100 + (v) * 100 / 255 - 100 + +#define HFA384X_LEVEL_TO_dBm_sign(v) (v) * 100 / 255 - 100 + +struct hfa384x_scan_request { + u16 channel_list; + u16 txrate; /* HFA384X_RATES_* */ +} __attribute__ ((packed)); + +struct hfa384x_hostscan_request { + u16 channel_list; + u16 txrate; + u16 target_ssid_len; + u8 target_ssid[32]; +} __attribute__ ((packed)); + +struct hfa384x_join_request { + u8 bssid[6]; + u16 channel; +} __attribute__ ((packed)); + +struct hfa384x_info_frame { + u16 len; + u16 type; +} __attribute__ ((packed)); + +struct hfa384x_comm_tallies { + u16 tx_unicast_frames; + u16 tx_multicast_frames; + u16 tx_fragments; + u16 tx_unicast_octets; + u16 tx_multicast_octets; + u16 tx_deferred_transmissions; + u16 tx_single_retry_frames; + u16 tx_multiple_retry_frames; + u16 tx_retry_limit_exceeded; + u16 tx_discards; + u16 rx_unicast_frames; + u16 rx_multicast_frames; + u16 rx_fragments; + u16 rx_unicast_octets; + u16 rx_multicast_octets; + u16 rx_fcs_errors; + u16 rx_discards_no_buffer; + u16 tx_discards_wrong_sa; + u16 rx_discards_wep_undecryptable; + u16 rx_message_in_msg_fragments; + u16 rx_message_in_bad_msg_fragments; +} __attribute__ ((packed)); + +struct hfa384x_comm_tallies32 { + u32 tx_unicast_frames; + u32 tx_multicast_frames; + u32 tx_fragments; + u32 tx_unicast_octets; + u32 tx_multicast_octets; + u32 tx_deferred_transmissions; + u32 tx_single_retry_frames; + u32 tx_multiple_retry_frames; + u32 tx_retry_limit_exceeded; + u32 tx_discards; + u32 rx_unicast_frames; + u32 rx_multicast_frames; + u32 rx_fragments; + u32 rx_unicast_octets; + u32 rx_multicast_octets; + u32 rx_fcs_errors; + u32 rx_discards_no_buffer; + u32 tx_discards_wrong_sa; + u32 rx_discards_wep_undecryptable; + u32 rx_message_in_msg_fragments; + u32 rx_message_in_bad_msg_fragments; +} __attribute__ ((packed)); + +struct hfa384x_scan_result_hdr { + u16 reserved; + u16 scan_reason; +#define HFA384X_SCAN_IN_PROGRESS 0 /* no results available yet */ +#define HFA384X_SCAN_HOST_INITIATED 1 +#define HFA384X_SCAN_FIRMWARE_INITIATED 2 +#define HFA384X_SCAN_INQUIRY_FROM_HOST 3 +} __attribute__ ((packed)); + +#define HFA384X_SCAN_MAX_RESULTS 32 + +struct hfa384x_scan_result { + u16 chid; + u16 anl; + u16 sl; + u8 bssid[6]; + u16 beacon_interval; + u16 capability; + u16 ssid_len; + u8 ssid[32]; + u8 sup_rates[10]; + u16 rate; +} __attribute__ ((packed)); + +struct hfa384x_hostscan_result { + u16 chid; + u16 anl; + u16 sl; + u8 bssid[6]; + u16 beacon_interval; + u16 capability; + u16 ssid_len; + u8 ssid[32]; + u8 sup_rates[10]; + u16 rate; + u16 atim; +} __attribute__ ((packed)); + +struct comm_tallies_sums { + unsigned int tx_unicast_frames; + unsigned int tx_multicast_frames; + unsigned int tx_fragments; + unsigned int tx_unicast_octets; + unsigned int tx_multicast_octets; + unsigned int tx_deferred_transmissions; + unsigned int tx_single_retry_frames; + unsigned int tx_multiple_retry_frames; + unsigned int tx_retry_limit_exceeded; + unsigned int tx_discards; + unsigned int rx_unicast_frames; + unsigned int rx_multicast_frames; + unsigned int rx_fragments; + unsigned int rx_unicast_octets; + unsigned int rx_multicast_octets; + unsigned int rx_fcs_errors; + unsigned int rx_discards_no_buffer; + unsigned int tx_discards_wrong_sa; + unsigned int rx_discards_wep_undecryptable; + unsigned int rx_message_in_msg_fragments; + unsigned int rx_message_in_bad_msg_fragments; +}; + + +struct hfa384x_regs { + u16 cmd; + u16 evstat; + u16 offset0; + u16 offset1; + u16 swsupport0; +}; + + +#if defined(PRISM2_PCCARD) || defined(PRISM2_PLX) +/* I/O ports for HFA384X Controller access */ +#define HFA384X_CMD_OFF 0x00 +#define HFA384X_PARAM0_OFF 0x02 +#define HFA384X_PARAM1_OFF 0x04 +#define HFA384X_PARAM2_OFF 0x06 +#define HFA384X_STATUS_OFF 0x08 +#define HFA384X_RESP0_OFF 0x0A +#define HFA384X_RESP1_OFF 0x0C +#define HFA384X_RESP2_OFF 0x0E +#define HFA384X_INFOFID_OFF 0x10 +#define HFA384X_CONTROL_OFF 0x14 +#define HFA384X_SELECT0_OFF 0x18 +#define HFA384X_SELECT1_OFF 0x1A +#define HFA384X_OFFSET0_OFF 0x1C +#define HFA384X_OFFSET1_OFF 0x1E +#define HFA384X_RXFID_OFF 0x20 +#define HFA384X_ALLOCFID_OFF 0x22 +#define HFA384X_TXCOMPLFID_OFF 0x24 +#define HFA384X_SWSUPPORT0_OFF 0x28 +#define HFA384X_SWSUPPORT1_OFF 0x2A +#define HFA384X_SWSUPPORT2_OFF 0x2C +#define HFA384X_EVSTAT_OFF 0x30 +#define HFA384X_INTEN_OFF 0x32 +#define HFA384X_EVACK_OFF 0x34 +#define HFA384X_DATA0_OFF 0x36 +#define HFA384X_DATA1_OFF 0x38 +#define HFA384X_AUXPAGE_OFF 0x3A +#define HFA384X_AUXOFFSET_OFF 0x3C +#define HFA384X_AUXDATA_OFF 0x3E +#endif /* PRISM2_PCCARD || PRISM2_PLX */ + +#ifdef PRISM2_PCI +/* Memory addresses for ISL3874 controller access */ +#define HFA384X_CMD_OFF 0x00 +#define HFA384X_PARAM0_OFF 0x04 +#define HFA384X_PARAM1_OFF 0x08 +#define HFA384X_PARAM2_OFF 0x0C +#define HFA384X_STATUS_OFF 0x10 +#define HFA384X_RESP0_OFF 0x14 +#define HFA384X_RESP1_OFF 0x18 +#define HFA384X_RESP2_OFF 0x1C +#define HFA384X_INFOFID_OFF 0x20 +#define HFA384X_CONTROL_OFF 0x28 +#define HFA384X_SELECT0_OFF 0x30 +#define HFA384X_SELECT1_OFF 0x34 +#define HFA384X_OFFSET0_OFF 0x38 +#define HFA384X_OFFSET1_OFF 0x3C +#define HFA384X_RXFID_OFF 0x40 +#define HFA384X_ALLOCFID_OFF 0x44 +#define HFA384X_TXCOMPLFID_OFF 0x48 +#define HFA384X_PCICOR_OFF 0x4C +#define HFA384X_SWSUPPORT0_OFF 0x50 +#define HFA384X_SWSUPPORT1_OFF 0x54 +#define HFA384X_SWSUPPORT2_OFF 0x58 +#define HFA384X_PCIHCR_OFF 0x5C +#define HFA384X_EVSTAT_OFF 0x60 +#define HFA384X_INTEN_OFF 0x64 +#define HFA384X_EVACK_OFF 0x68 +#define HFA384X_DATA0_OFF 0x6C +#define HFA384X_DATA1_OFF 0x70 +#define HFA384X_AUXPAGE_OFF 0x74 +#define HFA384X_AUXOFFSET_OFF 0x78 +#define HFA384X_AUXDATA_OFF 0x7C +#define HFA384X_PCI_M0_ADDRH_OFF 0x80 +#define HFA384X_PCI_M0_ADDRL_OFF 0x84 +#define HFA384X_PCI_M0_LEN_OFF 0x88 +#define HFA384X_PCI_M0_CTL_OFF 0x8C +#define HFA384X_PCI_STATUS_OFF 0x98 +#define HFA384X_PCI_M1_ADDRH_OFF 0xA0 +#define HFA384X_PCI_M1_ADDRL_OFF 0xA4 +#define HFA384X_PCI_M1_LEN_OFF 0xA8 +#define HFA384X_PCI_M1_CTL_OFF 0xAC + +/* PCI bus master control bits (these are undocumented; based on guessing and + * experimenting..) */ +#define HFA384X_PCI_CTL_FROM_BAP (BIT(5) | BIT(1) | BIT(0)) +#define HFA384X_PCI_CTL_TO_BAP (BIT(5) | BIT(0)) + +#endif /* PRISM2_PCI */ + + +/* Command codes for CMD reg. */ +#define HFA384X_CMDCODE_INIT 0x00 +#define HFA384X_CMDCODE_ENABLE 0x01 +#define HFA384X_CMDCODE_DISABLE 0x02 +#define HFA384X_CMDCODE_ALLOC 0x0A +#define HFA384X_CMDCODE_TRANSMIT 0x0B +#define HFA384X_CMDCODE_INQUIRE 0x11 +#define HFA384X_CMDCODE_ACCESS 0x21 +#define HFA384X_CMDCODE_ACCESS_WRITE (0x21 | BIT(8)) +#define HFA384X_CMDCODE_DOWNLOAD 0x22 +#define HFA384X_CMDCODE_READMIF 0x30 +#define HFA384X_CMDCODE_WRITEMIF 0x31 +#define HFA384X_CMDCODE_TEST 0x38 + +#define HFA384X_CMDCODE_MASK 0x3F + +/* Test mode operations */ +#define HFA384X_TEST_CHANGE_CHANNEL 0x08 +#define HFA384X_TEST_MONITOR 0x0B +#define HFA384X_TEST_STOP 0x0F +#define HFA384X_TEST_CFG_BITS 0x15 +#define HFA384X_TEST_CFG_BIT_ALC BIT(3) + +#define HFA384X_CMD_BUSY BIT(15) + +#define HFA384X_CMD_TX_RECLAIM BIT(8) + +#define HFA384X_OFFSET_ERR BIT(14) +#define HFA384X_OFFSET_BUSY BIT(15) + + +/* ProgMode for download command */ +#define HFA384X_PROGMODE_DISABLE 0 +#define HFA384X_PROGMODE_ENABLE_VOLATILE 1 +#define HFA384X_PROGMODE_ENABLE_NON_VOLATILE 2 +#define HFA384X_PROGMODE_PROGRAM_NON_VOLATILE 3 + +#define HFA384X_AUX_MAGIC0 0xfe01 +#define HFA384X_AUX_MAGIC1 0xdc23 +#define HFA384X_AUX_MAGIC2 0xba45 + +#define HFA384X_AUX_PORT_DISABLED 0 +#define HFA384X_AUX_PORT_DISABLE BIT(14) +#define HFA384X_AUX_PORT_ENABLE BIT(15) +#define HFA384X_AUX_PORT_ENABLED (BIT(14) | BIT(15)) +#define HFA384X_AUX_PORT_MASK (BIT(14) | BIT(15)) + +#define PRISM2_PDA_SIZE 1024 + + +/* Events; EvStat, Interrupt mask (IntEn), and acknowledge bits (EvAck) */ +#define HFA384X_EV_TICK BIT(15) +#define HFA384X_EV_WTERR BIT(14) +#define HFA384X_EV_INFDROP BIT(13) +#ifdef PRISM2_PCI +#define HFA384X_EV_PCI_M1 BIT(9) +#define HFA384X_EV_PCI_M0 BIT(8) +#endif /* PRISM2_PCI */ +#define HFA384X_EV_INFO BIT(7) +#define HFA384X_EV_DTIM BIT(5) +#define HFA384X_EV_CMD BIT(4) +#define HFA384X_EV_ALLOC BIT(3) +#define HFA384X_EV_TXEXC BIT(2) +#define HFA384X_EV_TX BIT(1) +#define HFA384X_EV_RX BIT(0) + + +/* HFA384X Information frames */ +#define HFA384X_INFO_HANDOVERADDR 0xF000 /* AP f/w ? */ +#define HFA384X_INFO_HANDOVERDEAUTHADDR 0xF001 /* AP f/w 1.3.7 */ +#define HFA384X_INFO_COMMTALLIES 0xF100 +#define HFA384X_INFO_SCANRESULTS 0xF101 +#define HFA384X_INFO_CHANNELINFORESULTS 0xF102 /* AP f/w only */ +#define HFA384X_INFO_HOSTSCANRESULTS 0xF103 +#define HFA384X_INFO_LINKSTATUS 0xF200 +#define HFA384X_INFO_ASSOCSTATUS 0xF201 /* ? */ +#define HFA384X_INFO_AUTHREQ 0xF202 /* ? */ +#define HFA384X_INFO_PSUSERCNT 0xF203 /* ? */ +#define HFA384X_INFO_KEYIDCHANGED 0xF204 /* ? */ + +enum { HFA384X_LINKSTATUS_CONNECTED = 1, + HFA384X_LINKSTATUS_DISCONNECTED = 2, + HFA384X_LINKSTATUS_AP_CHANGE = 3, + HFA384X_LINKSTATUS_AP_OUT_OF_RANGE = 4, + HFA384X_LINKSTATUS_AP_IN_RANGE = 5, + HFA384X_LINKSTATUS_ASSOC_FAILED = 6 }; + +enum { HFA384X_PORTTYPE_BSS = 1, HFA384X_PORTTYPE_WDS = 2, + HFA384X_PORTTYPE_PSEUDO_IBSS = 3, HFA384X_PORTTYPE_IBSS = 0, + HFA384X_PORTTYPE_HOSTAP = 6 }; + +#define HFA384X_RATES_1MBPS BIT(0) +#define HFA384X_RATES_2MBPS BIT(1) +#define HFA384X_RATES_5MBPS BIT(2) +#define HFA384X_RATES_11MBPS BIT(3) + +#define HFA384X_ROAMING_FIRMWARE 1 +#define HFA384X_ROAMING_HOST 2 +#define HFA384X_ROAMING_DISABLED 3 + +#define HFA384X_WEPFLAGS_PRIVACYINVOKED BIT(0) +#define HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED BIT(1) +#define HFA384X_WEPFLAGS_HOSTENCRYPT BIT(4) +#define HFA384X_WEPFLAGS_HOSTDECRYPT BIT(7) + +#define HFA384X_RX_STATUS_MSGTYPE (BIT(15) | BIT(14) | BIT(13)) +#define HFA384X_RX_STATUS_PCF BIT(12) +#define HFA384X_RX_STATUS_MACPORT (BIT(10) | BIT(9) | BIT(8)) +#define HFA384X_RX_STATUS_UNDECR BIT(1) +#define HFA384X_RX_STATUS_FCSERR BIT(0) + +#define HFA384X_RX_STATUS_GET_MSGTYPE(s) \ +(((s) & HFA384X_RX_STATUS_MSGTYPE) >> 13) +#define HFA384X_RX_STATUS_GET_MACPORT(s) \ +(((s) & HFA384X_RX_STATUS_MACPORT) >> 8) + +enum { HFA384X_RX_MSGTYPE_NORMAL = 0, HFA384X_RX_MSGTYPE_RFC1042 = 1, + HFA384X_RX_MSGTYPE_BRIDGETUNNEL = 2, HFA384X_RX_MSGTYPE_MGMT = 4 }; + + +#define HFA384X_TX_CTRL_ALT_RTRY BIT(5) +#define HFA384X_TX_CTRL_802_11 BIT(3) +#define HFA384X_TX_CTRL_802_3 0 +#define HFA384X_TX_CTRL_TX_EX BIT(2) +#define HFA384X_TX_CTRL_TX_OK BIT(1) + +#define HFA384X_TX_STATUS_RETRYERR BIT(0) +#define HFA384X_TX_STATUS_AGEDERR BIT(1) +#define HFA384X_TX_STATUS_DISCON BIT(2) +#define HFA384X_TX_STATUS_FORMERR BIT(3) + +/* HFA3861/3863 (BBP) Control Registers */ +#define HFA386X_CR_TX_CONFIGURE 0x12 /* CR9 */ +#define HFA386X_CR_RX_CONFIGURE 0x14 /* CR10 */ +#define HFA386X_CR_A_D_TEST_MODES2 0x1A /* CR13 */ +#define HFA386X_CR_MANUAL_TX_POWER 0x3E /* CR31 */ +#define HFA386X_CR_MEASURED_TX_POWER 0x74 /* CR58 */ + + +#ifdef __KERNEL__ + +#define PRISM2_TXFID_COUNT 8 +#define PRISM2_DATA_MAXLEN 2304 +#define PRISM2_TXFID_LEN (PRISM2_DATA_MAXLEN + sizeof(struct hfa384x_tx_frame)) +#define PRISM2_TXFID_EMPTY 0xffff +#define PRISM2_TXFID_RESERVED 0xfffe +#define PRISM2_DUMMY_FID 0xffff +#define MAX_SSID_LEN 32 +#define MAX_NAME_LEN 32 /* this is assumed to be equal to MAX_SSID_LEN */ + +#define PRISM2_DUMP_RX_HDR BIT(0) +#define PRISM2_DUMP_TX_HDR BIT(1) +#define PRISM2_DUMP_TXEXC_HDR BIT(2) + +struct hostap_tx_callback_info { + u16 idx; + void (*func)(struct sk_buff *, int ok, void *); + void *data; + struct hostap_tx_callback_info *next; +}; + + +/* IEEE 802.11 requires that STA supports concurrent reception of at least + * three fragmented frames. This define can be increased to support more + * concurrent frames, but it should be noted that each entry can consume about + * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ +#define PRISM2_FRAG_CACHE_LEN 4 + +struct prism2_frag_entry { + unsigned long first_frag_time; + unsigned int seq; + unsigned int last_frag; + struct sk_buff *skb; + u8 src_addr[ETH_ALEN]; + u8 dst_addr[ETH_ALEN]; +}; + + +struct hostap_cmd_queue { + struct list_head list; + wait_queue_head_t compl; + volatile enum { CMD_SLEEP, CMD_CALLBACK, CMD_COMPLETED } type; + void (*callback)(struct net_device *dev, long context, u16 resp0, + u16 res); + long context; + u16 cmd, param0, param1; + u16 resp0, res; + volatile int issued, issuing; + + atomic_t usecnt; + int del_req; +}; + +/* options for hw_shutdown */ +#define HOSTAP_HW_NO_DISABLE BIT(0) +#define HOSTAP_HW_ENABLE_CMDCOMPL BIT(1) + +typedef struct local_info local_info_t; + +struct prism2_helper_functions { + /* these functions are defined in hardware model specific files + * (hostap_{cs,plx,pci}.c */ + int (*card_present)(local_info_t *local); + void (*cor_sreset)(local_info_t *local); + int (*dev_open)(local_info_t *local); + int (*dev_close)(local_info_t *local); + void (*genesis_reset)(local_info_t *local, int hcr); + + /* the following functions are from hostap_hw.c, but they may have some + * hardware model specific code */ + + /* FIX: low-level commands like cmd might disappear at some point to + * make it easier to change them if needed (e.g., cmd would be replaced + * with write_mif/read_mif/testcmd/inquire); at least get_rid and + * set_rid might move to hostap_{cs,plx,pci}.c */ + int (*cmd)(struct net_device *dev, u16 cmd, u16 param0, u16 *param1, + u16 *resp0); + void (*read_regs)(struct net_device *dev, struct hfa384x_regs *regs); + int (*get_rid)(struct net_device *dev, u16 rid, void *buf, int len, + int exact_len); + int (*set_rid)(struct net_device *dev, u16 rid, void *buf, int len); + int (*hw_enable)(struct net_device *dev, int initial); + int (*hw_config)(struct net_device *dev, int initial); + void (*hw_reset)(struct net_device *dev); + void (*hw_shutdown)(struct net_device *dev, int no_disable); + int (*reset_port)(struct net_device *dev); + void (*schedule_reset)(local_info_t *local); + int (*download)(local_info_t *local, + struct prism2_download_param *param); + int (*tx)(struct sk_buff *skb, struct net_device *dev); + int (*set_tim)(struct net_device *dev, int aid, int set); + int (*read_aux)(struct net_device *dev, unsigned addr, int len, + u8 *buf); + + int need_tx_headroom; /* number of bytes of headroom needed before + * IEEE 802.11 header */ + enum { HOSTAP_HW_PCCARD, HOSTAP_HW_PLX, HOSTAP_HW_PCI } hw_type; +}; + + +struct prism2_download_data { + u32 dl_cmd; + u32 start_addr; + u32 num_areas; + struct prism2_download_data_area { + u32 addr; /* wlan card address */ + u32 len; + u8 *data; /* allocated data */ + } data[0]; +}; + + +#define HOSTAP_MAX_BSS_COUNT 64 +#define MAX_WPA_IE_LEN 64 + +struct hostap_bss_info { + struct list_head list; + unsigned long last_update; + unsigned int count; + u8 bssid[ETH_ALEN]; + u16 capab_info; + u8 ssid[32]; + size_t ssid_len; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + u8 rsn_ie[MAX_WPA_IE_LEN]; + size_t rsn_ie_len; + int chan; + int included; +}; + + +/* Per radio private Host AP data - shared by all net devices interfaces used + * by each radio (wlan#, wlan#ap, wlan#sta, WDS). + * ((struct hostap_interface *) netdev_priv(dev))->local points to this + * structure. */ +struct local_info { + struct module *hw_module; + int card_idx; + int dev_enabled; + int master_dev_auto_open; /* was master device opened automatically */ + int num_dev_open; /* number of open devices */ + struct net_device *dev; /* master radio device */ + struct net_device *ddev; /* main data device */ + struct list_head hostap_interfaces; /* Host AP interface list (contains + * struct hostap_interface entries) + */ + rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock + * when removing entries from the list. + * TX and RX paths can use read lock. */ + spinlock_t cmdlock, baplock, lock; + struct semaphore rid_bap_sem; + u16 infofid; /* MAC buffer id for info frame */ + /* txfid, intransmitfid, next_txtid, and next_alloc are protected by + * txfidlock */ + spinlock_t txfidlock; + int txfid_len; /* length of allocated TX buffers */ + u16 txfid[PRISM2_TXFID_COUNT]; /* buffer IDs for TX frames */ + /* buffer IDs for intransmit frames or PRISM2_TXFID_EMPTY if + * corresponding txfid is free for next TX frame */ + u16 intransmitfid[PRISM2_TXFID_COUNT]; + int next_txfid; /* index to the next txfid to be checked for + * availability */ + int next_alloc; /* index to the next intransmitfid to be checked for + * allocation events */ + + /* bitfield for atomic bitops */ +#define HOSTAP_BITS_TRANSMIT 0 +#define HOSTAP_BITS_BAP_TASKLET 1 +#define HOSTAP_BITS_BAP_TASKLET2 2 + long bits; + + struct ap_data *ap; + + char essid[MAX_SSID_LEN + 1]; + char name[MAX_NAME_LEN + 1]; + int name_set; + u16 channel_mask; /* mask of allowed channels */ + u16 scan_channel_mask; /* mask of channels to be scanned */ + struct comm_tallies_sums comm_tallies; + struct net_device_stats stats; + struct proc_dir_entry *proc; + int iw_mode; /* operating mode (IW_MODE_*) */ + int pseudo_adhoc; /* 0: IW_MODE_ADHOC is real 802.11 compliant IBSS + * 1: IW_MODE_ADHOC is "pseudo IBSS" */ + char bssid[ETH_ALEN]; + int channel; + int beacon_int; + int dtim_period; + int mtu; + int frame_dump; /* dump RX/TX frame headers, PRISM2_DUMP_ flags */ + int fw_tx_rate_control; + u16 tx_rate_control; + u16 basic_rates; + int hw_resetting; + int hw_ready; + int hw_reset_tries; /* how many times reset has been tried */ + int hw_downloading; + int shutdown; + int pri_only; + int no_pri; /* no PRI f/w present */ + int sram_type; /* 8 = x8 SRAM, 16 = x16 SRAM, -1 = unknown */ + + enum { + PRISM2_TXPOWER_AUTO = 0, PRISM2_TXPOWER_OFF, + PRISM2_TXPOWER_FIXED, PRISM2_TXPOWER_UNKNOWN + } txpower_type; + int txpower; /* if txpower_type == PRISM2_TXPOWER_FIXED */ + + /* command queue for hfa384x_cmd(); protected with cmdlock */ + struct list_head cmd_queue; + /* max_len for cmd_queue; in addition, cmd_callback can use two + * additional entries to prevent sleeping commands from stopping + * transmits */ +#define HOSTAP_CMD_QUEUE_MAX_LEN 16 + int cmd_queue_len; /* number of entries in cmd_queue */ + + /* if card timeout is detected in interrupt context, reset_queue is + * used to schedule card reseting to be done in user context */ + struct work_struct reset_queue; + + /* For scheduling a change of the promiscuous mode RID */ + int is_promisc; + struct work_struct set_multicast_list_queue; + + struct work_struct set_tim_queue; + struct list_head set_tim_list; + spinlock_t set_tim_lock; + + int wds_max_connections; + int wds_connections; +#define HOSTAP_WDS_BROADCAST_RA BIT(0) +#define HOSTAP_WDS_AP_CLIENT BIT(1) +#define HOSTAP_WDS_STANDARD_FRAME BIT(2) + u32 wds_type; + u16 tx_control; /* flags to be used in TX description */ + int manual_retry_count; /* -1 = use f/w default; otherwise retry count + * to be used with all frames */ + + struct iw_statistics wstats; + unsigned long scan_timestamp; /* Time started to scan */ + enum { + PRISM2_MONITOR_80211 = 0, PRISM2_MONITOR_PRISM = 1, + PRISM2_MONITOR_CAPHDR = 2 + } monitor_type; + int (*saved_eth_header_parse)(struct sk_buff *skb, + unsigned char *haddr); + int monitor_allow_fcserr; + + int hostapd; /* whether user space daemon, hostapd, is used for AP + * management */ + int hostapd_sta; /* whether hostapd is used with an extra STA interface + */ + struct net_device *apdev; + struct net_device_stats apdevstats; + + char assoc_ap_addr[ETH_ALEN]; + struct net_device *stadev; + struct net_device_stats stadevstats; + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 + struct ieee80211_crypt_data *crypt[WEP_KEYS]; + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + struct timer_list crypt_deinit_timer; + struct list_head crypt_deinit_list; + + int open_wep; /* allow unencrypted frames */ + int host_encrypt; + int host_decrypt; + int privacy_invoked; /* force privacy invoked flag even if no keys are + * configured */ + int fw_encrypt_ok; /* whether firmware-based WEP encrypt is working + * in Host AP mode (STA f/w 1.4.9 or newer) */ + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ + + struct prism2_frag_entry frag_cache[PRISM2_FRAG_CACHE_LEN]; + unsigned int frag_next_idx; + + int ieee_802_1x; /* is IEEE 802.1X used */ + + int antsel_tx, antsel_rx; + int rts_threshold; /* dot11RTSThreshold */ + int fragm_threshold; /* dot11FragmentationThreshold */ + int auth_algs; /* PRISM2_AUTH_ flags */ + + int enh_sec; /* cnfEnhSecurity options (broadcast SSID hide/ignore) */ + int tallies32; /* 32-bit tallies in use */ + + struct prism2_helper_functions *func; + + u8 *pda; + int fw_ap; +#define PRISM2_FW_VER(major, minor, variant) \ +(((major) << 16) | ((minor) << 8) | variant) + u32 sta_fw_ver; + + /* Tasklets for handling hardware IRQ related operations outside hw IRQ + * handler */ + struct tasklet_struct bap_tasklet; + + struct tasklet_struct info_tasklet; + struct sk_buff_head info_list; /* info frames as skb's for + * info_tasklet */ + + struct hostap_tx_callback_info *tx_callback; /* registered TX callbacks + */ + + struct tasklet_struct rx_tasklet; + struct sk_buff_head rx_list; + + struct tasklet_struct sta_tx_exc_tasklet; + struct sk_buff_head sta_tx_exc_list; + + int host_roaming; + unsigned long last_join_time; /* time of last JoinRequest */ + struct hfa384x_hostscan_result *last_scan_results; + int last_scan_results_count; + enum { PRISM2_SCAN, PRISM2_HOSTSCAN } last_scan_type; + struct work_struct info_queue; + long pending_info; /* bit field of pending info_queue items */ +#define PRISM2_INFO_PENDING_LINKSTATUS 0 +#define PRISM2_INFO_PENDING_SCANRESULTS 1 + int prev_link_status; /* previous received LinkStatus info */ + int prev_linkstatus_connected; + u8 preferred_ap[6]; /* use this AP if possible */ + +#ifdef PRISM2_CALLBACK + void *callback_data; /* Can be used in callbacks; e.g., allocate + * on enable event and free on disable event. + * Host AP driver code does not touch this. */ +#endif /* PRISM2_CALLBACK */ + + wait_queue_head_t hostscan_wq; + + /* Passive scan in Host AP mode */ + struct timer_list passive_scan_timer; + int passive_scan_interval; /* in seconds, 0 = disabled */ + int passive_scan_channel; + enum { PASSIVE_SCAN_WAIT, PASSIVE_SCAN_LISTEN } passive_scan_state; + + struct timer_list tick_timer; + unsigned long last_tick_timer; + unsigned int sw_tick_stuck; + + /* commsQuality / dBmCommsQuality data from periodic polling; only + * valid for Managed and Ad-hoc modes */ + unsigned long last_comms_qual_update; + int comms_qual; /* in some odd unit.. */ + int avg_signal; /* in dB (note: negative) */ + int avg_noise; /* in dB (note: negative) */ + struct work_struct comms_qual_update; + + /* RSSI to dBm adjustment (for RX descriptor fields) */ + int rssi_to_dBm; /* substract from RSSI to get approximate dBm value */ + + /* BSS list / protected by local->lock */ + struct list_head bss_list; + int num_bss_info; + int wpa; /* WPA support enabled */ + int tkip_countermeasures; + int drop_unencrypted; + /* Generic IEEE 802.11 info element to be added to + * ProbeResp/Beacon/(Re)AssocReq */ + u8 *generic_elem; + size_t generic_elem_len; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + /* Persistent volatile download data */ + struct prism2_download_data *dl_pri; + struct prism2_download_data *dl_sec; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +#ifdef PRISM2_IO_DEBUG +#define PRISM2_IO_DEBUG_SIZE 10000 + u32 io_debug[PRISM2_IO_DEBUG_SIZE]; + int io_debug_head; + int io_debug_enabled; +#endif /* PRISM2_IO_DEBUG */ + + /* Pointer to hardware model specific (cs,pci,plx) private data. */ + void *hw_priv; +}; + + +/* Per interface private Host AP data + * Allocated for each net device that Host AP uses (wlan#, wlan#ap, wlan#sta, + * WDS) and netdev_priv(dev) points to this structure. */ +struct hostap_interface { + struct list_head list; /* list entry in Host AP interface list */ + struct net_device *dev; /* pointer to this device */ + struct local_info *local; /* pointer to shared private data */ + struct net_device_stats stats; + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; + + enum { + HOSTAP_INTERFACE_MASTER, + HOSTAP_INTERFACE_MAIN, + HOSTAP_INTERFACE_AP, + HOSTAP_INTERFACE_STA, + HOSTAP_INTERFACE_WDS, + } type; + + union { + struct hostap_interface_wds { + u8 remote_addr[ETH_ALEN]; + } wds; + } u; +}; + + +#define HOSTAP_SKB_TX_DATA_MAGIC 0xf08a36a2 + +/* + * TX meta data - stored in skb->cb buffer, so this must not be increased over + * the 40-byte limit + */ +struct hostap_skb_tx_data { + u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ + u8 rate; /* transmit rate */ +#define HOSTAP_TX_FLAGS_WDS BIT(0) +#define HOSTAP_TX_FLAGS_BUFFERED_FRAME BIT(1) +#define HOSTAP_TX_FLAGS_ADD_MOREDATA BIT(2) + u8 flags; /* HOSTAP_TX_FLAGS_* */ + u16 tx_cb_idx; + struct hostap_interface *iface; + unsigned long jiffies; /* queueing timestamp */ + unsigned short ethertype; +}; + + +#ifndef PRISM2_NO_DEBUG + +#define DEBUG_FID BIT(0) +#define DEBUG_PS BIT(1) +#define DEBUG_FLOW BIT(2) +#define DEBUG_AP BIT(3) +#define DEBUG_HW BIT(4) +#define DEBUG_EXTRA BIT(5) +#define DEBUG_EXTRA2 BIT(6) +#define DEBUG_PS2 BIT(7) +#define DEBUG_MASK (DEBUG_PS | DEBUG_AP | DEBUG_HW | DEBUG_EXTRA) +#define PDEBUG(n, args...) \ +do { if ((n) & DEBUG_MASK) printk(KERN_DEBUG args); } while (0) +#define PDEBUG2(n, args...) \ +do { if ((n) & DEBUG_MASK) printk(args); } while (0) + +#else /* PRISM2_NO_DEBUG */ + +#define PDEBUG(n, args...) +#define PDEBUG2(n, args...) + +#endif /* PRISM2_NO_DEBUG */ + +enum { BAP0 = 0, BAP1 = 1 }; + +#define PRISM2_IO_DEBUG_CMD_INB 0 +#define PRISM2_IO_DEBUG_CMD_INW 1 +#define PRISM2_IO_DEBUG_CMD_INSW 2 +#define PRISM2_IO_DEBUG_CMD_OUTB 3 +#define PRISM2_IO_DEBUG_CMD_OUTW 4 +#define PRISM2_IO_DEBUG_CMD_OUTSW 5 +#define PRISM2_IO_DEBUG_CMD_ERROR 6 +#define PRISM2_IO_DEBUG_CMD_INTERRUPT 7 + +#ifdef PRISM2_IO_DEBUG + +#define PRISM2_IO_DEBUG_ENTRY(cmd, reg, value) \ +(((cmd) << 24) | ((reg) << 16) | value) + +static inline void prism2_io_debug_add(struct net_device *dev, int cmd, + int reg, int value) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + + if (!local->io_debug_enabled) + return; + + local->io_debug[local->io_debug_head] = jiffies & 0xffffffff; + if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) + local->io_debug_head = 0; + local->io_debug[local->io_debug_head] = + PRISM2_IO_DEBUG_ENTRY(cmd, reg, value); + if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) + local->io_debug_head = 0; +} + + +static inline void prism2_io_debug_error(struct net_device *dev, int err) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + unsigned long flags; + + if (!local->io_debug_enabled) + return; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_ERROR, 0, err); + if (local->io_debug_enabled == 1) { + local->io_debug_enabled = 0; + printk(KERN_DEBUG "%s: I/O debug stopped\n", dev->name); + } + spin_unlock_irqrestore(&local->lock, flags); +} + +#else /* PRISM2_IO_DEBUG */ + +static inline void prism2_io_debug_add(struct net_device *dev, int cmd, + int reg, int value) +{ +} + +static inline void prism2_io_debug_error(struct net_device *dev, int err) +{ +} + +#endif /* PRISM2_IO_DEBUG */ + + +#ifdef PRISM2_CALLBACK +enum { + /* Called when card is enabled */ + PRISM2_CALLBACK_ENABLE, + + /* Called when card is disabled */ + PRISM2_CALLBACK_DISABLE, + + /* Called when RX/TX starts/ends */ + PRISM2_CALLBACK_RX_START, PRISM2_CALLBACK_RX_END, + PRISM2_CALLBACK_TX_START, PRISM2_CALLBACK_TX_END +}; +void prism2_callback(local_info_t *local, int event); +#else /* PRISM2_CALLBACK */ +#define prism2_callback(d, e) do { } while (0) +#endif /* PRISM2_CALLBACK */ + +#endif /* __KERNEL__ */ + +#endif /* HOSTAP_WLAN_H */ diff --git a/drivers/net/wireless/ieee802_11.h b/drivers/net/wireless/ieee802_11.h deleted file mode 100644 index 53dd5248f9f..00000000000 --- a/drivers/net/wireless/ieee802_11.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _IEEE802_11_H -#define _IEEE802_11_H - -#define IEEE802_11_DATA_LEN 2304 -/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. - - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - - -#define IEEE802_11_HLEN 30 -#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN) - -struct ieee802_11_hdr { - u16 frame_ctl; - u16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - u16 seq_ctl; - u8 addr4[ETH_ALEN]; -} __attribute__ ((packed)); - -/* Frame control field constants */ -#define IEEE802_11_FCTL_VERS 0x0002 -#define IEEE802_11_FCTL_FTYPE 0x000c -#define IEEE802_11_FCTL_STYPE 0x00f0 -#define IEEE802_11_FCTL_TODS 0x0100 -#define IEEE802_11_FCTL_FROMDS 0x0200 -#define IEEE802_11_FCTL_MOREFRAGS 0x0400 -#define IEEE802_11_FCTL_RETRY 0x0800 -#define IEEE802_11_FCTL_PM 0x1000 -#define IEEE802_11_FCTL_MOREDATA 0x2000 -#define IEEE802_11_FCTL_WEP 0x4000 -#define IEEE802_11_FCTL_ORDER 0x8000 - -#define IEEE802_11_FTYPE_MGMT 0x0000 -#define IEEE802_11_FTYPE_CTL 0x0004 -#define IEEE802_11_FTYPE_DATA 0x0008 - -/* management */ -#define IEEE802_11_STYPE_ASSOC_REQ 0x0000 -#define IEEE802_11_STYPE_ASSOC_RESP 0x0010 -#define IEEE802_11_STYPE_REASSOC_REQ 0x0020 -#define IEEE802_11_STYPE_REASSOC_RESP 0x0030 -#define IEEE802_11_STYPE_PROBE_REQ 0x0040 -#define IEEE802_11_STYPE_PROBE_RESP 0x0050 -#define IEEE802_11_STYPE_BEACON 0x0080 -#define IEEE802_11_STYPE_ATIM 0x0090 -#define IEEE802_11_STYPE_DISASSOC 0x00A0 -#define IEEE802_11_STYPE_AUTH 0x00B0 -#define IEEE802_11_STYPE_DEAUTH 0x00C0 - -/* control */ -#define IEEE802_11_STYPE_PSPOLL 0x00A0 -#define IEEE802_11_STYPE_RTS 0x00B0 -#define IEEE802_11_STYPE_CTS 0x00C0 -#define IEEE802_11_STYPE_ACK 0x00D0 -#define IEEE802_11_STYPE_CFEND 0x00E0 -#define IEEE802_11_STYPE_CFENDACK 0x00F0 - -/* data */ -#define IEEE802_11_STYPE_DATA 0x0000 -#define IEEE802_11_STYPE_DATA_CFACK 0x0010 -#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020 -#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030 -#define IEEE802_11_STYPE_NULLFUNC 0x0040 -#define IEEE802_11_STYPE_CFACK 0x0050 -#define IEEE802_11_STYPE_CFPOLL 0x0060 -#define IEEE802_11_STYPE_CFACKPOLL 0x0070 - -#define IEEE802_11_SCTL_FRAG 0x000F -#define IEEE802_11_SCTL_SEQ 0xFFF0 - -#endif /* _IEEE802_11_H */ diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c new file mode 100644 index 00000000000..2414e6493aa --- /dev/null +++ b/drivers/net/wireless/ipw2100.c @@ -0,0 +1,8680 @@ +/****************************************************************************** + + Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + + Portions of this file are based on the sample_* files provided by Wireless + Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes + <jt@hpl.hp.com> + + Portions of this file are based on the Host AP project, + Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + <jkmaline@cc.hut.fi> + Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + + Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and + ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c + available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox + +******************************************************************************/ +/* + + Initial driver on which this is based was developed by Janusz Gorycki, + Maciej Urbaniak, and Maciej Sosnowski. + + Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak. + +Theory of Operation + +Tx - Commands and Data + +Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs) +Each TBD contains a pointer to the physical (dma_addr_t) address of data being +sent to the firmware as well as the length of the data. + +The host writes to the TBD queue at the WRITE index. The WRITE index points +to the _next_ packet to be written and is advanced when after the TBD has been +filled. + +The firmware pulls from the TBD queue at the READ index. The READ index points +to the currently being read entry, and is advanced once the firmware is +done with a packet. + +When data is sent to the firmware, the first TBD is used to indicate to the +firmware if a Command or Data is being sent. If it is Command, all of the +command information is contained within the physical address referred to by the +TBD. If it is Data, the first TBD indicates the type of data packet, number +of fragments, etc. The next TBD then referrs to the actual packet location. + +The Tx flow cycle is as follows: + +1) ipw2100_tx() is called by kernel with SKB to transmit +2) Packet is move from the tx_free_list and appended to the transmit pending + list (tx_pend_list) +3) work is scheduled to move pending packets into the shared circular queue. +4) when placing packet in the circular queue, the incoming SKB is DMA mapped + to a physical address. That address is entered into a TBD. Two TBDs are + filled out. The first indicating a data packet, the second referring to the + actual payload data. +5) the packet is removed from tx_pend_list and placed on the end of the + firmware pending list (fw_pend_list) +6) firmware is notified that the WRITE index has +7) Once the firmware has processed the TBD, INTA is triggered. +8) For each Tx interrupt received from the firmware, the READ index is checked + to see which TBDs are done being processed. +9) For each TBD that has been processed, the ISR pulls the oldest packet + from the fw_pend_list. +10)The packet structure contained in the fw_pend_list is then used + to unmap the DMA address and to free the SKB originally passed to the driver + from the kernel. +11)The packet structure is placed onto the tx_free_list + +The above steps are the same for commands, only the msg_free_list/msg_pend_list +are used instead of tx_free_list/tx_pend_list + +... + +Critical Sections / Locking : + +There are two locks utilized. The first is the low level lock (priv->low_lock) +that protects the following: + +- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows: + + tx_free_list : Holds pre-allocated Tx buffers. + TAIL modified in __ipw2100_tx_process() + HEAD modified in ipw2100_tx() + + tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring + TAIL modified ipw2100_tx() + HEAD modified by ipw2100_tx_send_data() + + msg_free_list : Holds pre-allocated Msg (Command) buffers + TAIL modified in __ipw2100_tx_process() + HEAD modified in ipw2100_hw_send_command() + + msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring + TAIL modified in ipw2100_hw_send_command() + HEAD modified in ipw2100_tx_send_commands() + + The flow of data on the TX side is as follows: + + MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST + TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST + + The methods that work on the TBD ring are protected via priv->low_lock. + +- The internal data state of the device itself +- Access to the firmware read/write indexes for the BD queues + and associated logic + +All external entry functions are locked with the priv->action_lock to ensure +that only one external action is invoked at a time. + + +*/ + +#include <linux/compiler.h> +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/if_arp.h> +#include <linux/in6.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/proc_fs.h> +#include <linux/skbuff.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#define __KERNEL_SYSCALLS__ +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/unistd.h> +#include <linux/stringify.h> +#include <linux/tcp.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/time.h> +#include <linux/firmware.h> +#include <linux/acpi.h> +#include <linux/ctype.h> + +#include "ipw2100.h" + +#define IPW2100_VERSION "1.1.0" + +#define DRV_NAME "ipw2100" +#define DRV_VERSION IPW2100_VERSION +#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver" +#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation" + + +/* Debugging stuff */ +#ifdef CONFIG_IPW_DEBUG +#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */ +#endif + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); + +static int debug = 0; +static int mode = 0; +static int channel = 0; +static int associate = 1; +static int disable = 0; +#ifdef CONFIG_PM +static struct ipw2100_fw ipw2100_firmware; +#endif + +#include <linux/moduleparam.h> +module_param(debug, int, 0444); +module_param(mode, int, 0444); +module_param(channel, int, 0444); +module_param(associate, int, 0444); +module_param(disable, int, 0444); + +MODULE_PARM_DESC(debug, "debug level"); +MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); +MODULE_PARM_DESC(channel, "channel"); +MODULE_PARM_DESC(associate, "auto associate when scanning (default on)"); +MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); + +static u32 ipw2100_debug_level = IPW_DL_NONE; + +#ifdef CONFIG_IPW_DEBUG +#define IPW_DEBUG(level, message...) \ +do { \ + if (ipw2100_debug_level & (level)) { \ + printk(KERN_DEBUG "ipw2100: %c %s ", \ + in_interrupt() ? 'I' : 'U', __FUNCTION__); \ + printk(message); \ + } \ +} while (0) +#else +#define IPW_DEBUG(level, message...) do {} while (0) +#endif /* CONFIG_IPW_DEBUG */ + +#ifdef CONFIG_IPW_DEBUG +static const char *command_types[] = { + "undefined", + "unused", /* HOST_ATTENTION */ + "HOST_COMPLETE", + "unused", /* SLEEP */ + "unused", /* HOST_POWER_DOWN */ + "unused", + "SYSTEM_CONFIG", + "unused", /* SET_IMR */ + "SSID", + "MANDATORY_BSSID", + "AUTHENTICATION_TYPE", + "ADAPTER_ADDRESS", + "PORT_TYPE", + "INTERNATIONAL_MODE", + "CHANNEL", + "RTS_THRESHOLD", + "FRAG_THRESHOLD", + "POWER_MODE", + "TX_RATES", + "BASIC_TX_RATES", + "WEP_KEY_INFO", + "unused", + "unused", + "unused", + "unused", + "WEP_KEY_INDEX", + "WEP_FLAGS", + "ADD_MULTICAST", + "CLEAR_ALL_MULTICAST", + "BEACON_INTERVAL", + "ATIM_WINDOW", + "CLEAR_STATISTICS", + "undefined", + "undefined", + "undefined", + "undefined", + "TX_POWER_INDEX", + "undefined", + "undefined", + "undefined", + "undefined", + "undefined", + "undefined", + "BROADCAST_SCAN", + "CARD_DISABLE", + "PREFERRED_BSSID", + "SET_SCAN_OPTIONS", + "SCAN_DWELL_TIME", + "SWEEP_TABLE", + "AP_OR_STATION_TABLE", + "GROUP_ORDINALS", + "SHORT_RETRY_LIMIT", + "LONG_RETRY_LIMIT", + "unused", /* SAVE_CALIBRATION */ + "unused", /* RESTORE_CALIBRATION */ + "undefined", + "undefined", + "undefined", + "HOST_PRE_POWER_DOWN", + "unused", /* HOST_INTERRUPT_COALESCING */ + "undefined", + "CARD_DISABLE_PHY_OFF", + "MSDU_TX_RATES" + "undefined", + "undefined", + "SET_STATION_STAT_BITS", + "CLEAR_STATIONS_STAT_BITS", + "LEAP_ROGUE_MODE", + "SET_SECURITY_INFORMATION", + "DISASSOCIATION_BSSID", + "SET_WPA_ASS_IE" +}; +#endif + + +/* Pre-decl until we get the code solid and then we can clean it up */ +static void ipw2100_tx_send_commands(struct ipw2100_priv *priv); +static void ipw2100_tx_send_data(struct ipw2100_priv *priv); +static int ipw2100_adapter_setup(struct ipw2100_priv *priv); + +static void ipw2100_queues_initialize(struct ipw2100_priv *priv); +static void ipw2100_queues_free(struct ipw2100_priv *priv); +static int ipw2100_queues_allocate(struct ipw2100_priv *priv); + +static int ipw2100_fw_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_get_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, + size_t max); +static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, + size_t max); +static void ipw2100_release_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static int ipw2100_ucode_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw); +static void ipw2100_wx_event_work(struct ipw2100_priv *priv); +static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev); +static struct iw_handler_def ipw2100_wx_handler_def; + + +static inline void read_register(struct net_device *dev, u32 reg, u32 *val) +{ + *val = readl((void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val); +} + +static inline void write_register(struct net_device *dev, u32 reg, u32 val) +{ + writel(val, (void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val); +} + +static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val) +{ + *val = readw((void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val); +} + +static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val) +{ + *val = readb((void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val); +} + +static inline void write_register_word(struct net_device *dev, u32 reg, u16 val) +{ + writew(val, (void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val); +} + + +static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val) +{ + writeb(val, (void __iomem *)(dev->base_addr + reg)); + IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val); +} + +static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val) +{ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); + write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); +} + +static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr) +{ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + addr & IPW_REG_INDIRECT_ADDR_MASK); +} + +static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val) +{ + write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val); +} + +static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len, + const u8 *buf) +{ + u32 aligned_addr; + u32 aligned_len; + u32 dif_len; + u32 i; + + /* read first nibble byte by byte */ + aligned_addr = addr & (~0x3); + dif_len = addr - aligned_addr; + if (dif_len) { + /* Start reading at aligned_addr + dif_len */ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + write_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, + *buf); + + len -= dif_len; + aligned_addr += 4; + } + + /* read DWs through autoincrement registers */ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + aligned_addr); + aligned_len = len & (~0x3); + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + write_register( + dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf); + + /* copy the last nibble */ + dif_len = len - aligned_len; + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + write_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf); +} + +static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len, + u8 *buf) +{ + u32 aligned_addr; + u32 aligned_len; + u32 dif_len; + u32 i; + + /* read first nibble byte by byte */ + aligned_addr = addr & (~0x3); + dif_len = addr - aligned_addr; + if (dif_len) { + /* Start reading at aligned_addr + dif_len */ + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + read_register_byte( + dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf); + + len -= dif_len; + aligned_addr += 4; + } + + /* read DWs through autoincrement registers */ + write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, + aligned_addr); + aligned_len = len & (~0x3); + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + read_register(dev, IPW_REG_AUTOINCREMENT_DATA, + (u32 *)buf); + + /* copy the last nibble */ + dif_len = len - aligned_len; + write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, + aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + + i, buf); +} + +static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev) +{ + return (dev->base_addr && + (readl((void __iomem *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START)) + == IPW_DATA_DOA_DEBUG_VALUE)); +} + +static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, + void *val, u32 *len) +{ + struct ipw2100_ordinals *ordinals = &priv->ordinals; + u32 addr; + u32 field_info; + u16 field_len; + u16 field_count; + u32 total_length; + + if (ordinals->table1_addr == 0) { + printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " + "before they have been loaded.\n"); + return -EINVAL; + } + + if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { + if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + printk(KERN_WARNING DRV_NAME + ": ordinal buffer length too small, need %zd\n", + IPW_ORD_TAB_1_ENTRY_SIZE); + + return -EINVAL; + } + + read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2), + &addr); + read_nic_dword(priv->net_dev, addr, val); + + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + return 0; + } + + if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) { + + ord -= IPW_START_ORD_TAB_2; + + /* get the address of statistic */ + read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3), + &addr); + + /* get the second DW of statistics ; + * two 16-bit words - first is length, second is count */ + read_nic_dword(priv->net_dev, + ordinals->table2_addr + (ord << 3) + sizeof(u32), + &field_info); + + /* get each entry length */ + field_len = *((u16 *)&field_info); + + /* get number of entries */ + field_count = *(((u16 *)&field_info) + 1); + + /* abort if no enought memory */ + total_length = field_len * field_count; + if (total_length > *len) { + *len = total_length; + return -EINVAL; + } + + *len = total_length; + if (!total_length) + return 0; + + /* read the ordinal data from the SRAM */ + read_nic_memory(priv->net_dev, addr, total_length, val); + + return 0; + } + + printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " + "in table 2\n", ord); + + return -EINVAL; +} + +static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val, + u32 *len) +{ + struct ipw2100_ordinals *ordinals = &priv->ordinals; + u32 addr; + + if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { + if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) { + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + IPW_DEBUG_INFO("wrong size\n"); + return -EINVAL; + } + + read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2), + &addr); + + write_nic_dword(priv->net_dev, addr, *val); + + *len = IPW_ORD_TAB_1_ENTRY_SIZE; + + return 0; + } + + IPW_DEBUG_INFO("wrong table\n"); + if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) + return -EINVAL; + + return -EINVAL; +} + +static char *snprint_line(char *buf, size_t count, + const u8 *data, u32 len, u32 ofs) +{ + int out, i, j, l; + char c; + + out = snprintf(buf, count, "%08X", ofs); + + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) + out += snprintf(buf + out, count - out, "%02X ", + data[(i * 8 + j)]); + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + out += snprintf(buf + out, count - out, " "); + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) { + c = data[(i * 8 + j)]; + if (!isascii(c) || !isprint(c)) + c = '.'; + + out += snprintf(buf + out, count - out, "%c", c); + } + + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + return buf; +} + +static void printk_buf(int level, const u8 *data, u32 len) +{ + char line[81]; + u32 ofs = 0; + if (!(ipw2100_debug_level & level)) + return; + + while (len) { + printk(KERN_DEBUG "%s\n", + snprint_line(line, sizeof(line), &data[ofs], + min(len, 16U), ofs)); + ofs += 16; + len -= min(len, 16U); + } +} + + + +#define MAX_RESET_BACKOFF 10 + +static inline void schedule_reset(struct ipw2100_priv *priv) +{ + unsigned long now = get_seconds(); + + /* If we haven't received a reset request within the backoff period, + * then we can reset the backoff interval so this reset occurs + * immediately */ + if (priv->reset_backoff && + (now - priv->last_reset > priv->reset_backoff)) + priv->reset_backoff = 0; + + priv->last_reset = get_seconds(); + + if (!(priv->status & STATUS_RESET_PENDING)) { + IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n", + priv->net_dev->name, priv->reset_backoff); + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + priv->status |= STATUS_RESET_PENDING; + if (priv->reset_backoff) + queue_delayed_work(priv->workqueue, &priv->reset_work, + priv->reset_backoff * HZ); + else + queue_work(priv->workqueue, &priv->reset_work); + + if (priv->reset_backoff < MAX_RESET_BACKOFF) + priv->reset_backoff++; + + wake_up_interruptible(&priv->wait_command_queue); + } else + IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n", + priv->net_dev->name); + +} + +#define HOST_COMPLETE_TIMEOUT (2 * HZ) +static int ipw2100_hw_send_command(struct ipw2100_priv *priv, + struct host_command * cmd) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + unsigned long flags; + int err = 0; + + IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n", + command_types[cmd->host_command], cmd->host_command, + cmd->host_command_length); + printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters, + cmd->host_command_length); + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->fatal_error) { + IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n"); + err = -EIO; + goto fail_unlock; + } + + if (!(priv->status & STATUS_RUNNING)) { + IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n"); + err = -EIO; + goto fail_unlock; + } + + if (priv->status & STATUS_CMD_ACTIVE) { + IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n"); + err = -EBUSY; + goto fail_unlock; + } + + if (list_empty(&priv->msg_free_list)) { + IPW_DEBUG_INFO("no available msg buffers\n"); + goto fail_unlock; + } + + priv->status |= STATUS_CMD_ACTIVE; + priv->messages_sent++; + + element = priv->msg_free_list.next; + + packet = list_entry(element, struct ipw2100_tx_packet, list); + packet->jiffy_start = jiffies; + + /* initialize the firmware command packet */ + packet->info.c_struct.cmd->host_command_reg = cmd->host_command; + packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1; + packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length; + packet->info.c_struct.cmd->sequence = cmd->host_command_sequence; + + memcpy(packet->info.c_struct.cmd->host_command_params_reg, + cmd->host_command_parameters, + sizeof(packet->info.c_struct.cmd->host_command_params_reg)); + + list_del(element); + DEC_STAT(&priv->msg_free_stat); + + list_add_tail(element, &priv->msg_pend_list); + INC_STAT(&priv->msg_pend_stat); + + ipw2100_tx_send_commands(priv); + ipw2100_tx_send_data(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + + /* + * We must wait for this command to complete before another + * command can be sent... but if we wait more than 3 seconds + * then there is a problem. + */ + + err = wait_event_interruptible_timeout( + priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE), + HOST_COMPLETE_TIMEOUT); + + if (err == 0) { + IPW_DEBUG_INFO("Command completion failed out after %dms.\n", + HOST_COMPLETE_TIMEOUT / (HZ / 100)); + priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT; + priv->status &= ~STATUS_CMD_ACTIVE; + schedule_reset(priv); + return -EIO; + } + + if (priv->fatal_error) { + printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", + priv->net_dev->name); + return -EIO; + } + + /* !!!!! HACK TEST !!!!! + * When lots of debug trace statements are enabled, the driver + * doesn't seem to have as many firmware restart cycles... + * + * As a test, we're sticking in a 1/100s delay here */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HZ / 100); + + return 0; + + fail_unlock: + spin_unlock_irqrestore(&priv->low_lock, flags); + + return err; +} + + +/* + * Verify the values and data access of the hardware + * No locks needed or used. No functions called. + */ +static int ipw2100_verify(struct ipw2100_priv *priv) +{ + u32 data1, data2; + u32 address; + + u32 val1 = 0x76543210; + u32 val2 = 0xFEDCBA98; + + /* Domain 0 check - all values should be DOA_DEBUG */ + for (address = IPW_REG_DOA_DEBUG_AREA_START; + address < IPW_REG_DOA_DEBUG_AREA_END; + address += sizeof(u32)) { + read_register(priv->net_dev, address, &data1); + if (data1 != IPW_DATA_DOA_DEBUG_VALUE) + return -EIO; + } + + /* Domain 1 check - use arbitrary read/write compare */ + for (address = 0; address < 5; address++) { + /* The memory area is not used now */ + write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, + val1); + write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, + val2); + read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, + &data1); + read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, + &data2); + if (val1 == data1 && val2 == data2) + return 0; + } + + return -EIO; +} + +/* + * + * Loop until the CARD_DISABLED bit is the same value as the + * supplied parameter + * + * TODO: See if it would be more efficient to do a wait/wake + * cycle and have the completion event trigger the wakeup + * + */ +#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli +static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state) +{ + int i; + u32 card_state; + u32 len = sizeof(card_state); + int err; + + for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) { + err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED, + &card_state, &len); + if (err) { + IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal " + "failed.\n"); + return 0; + } + + /* We'll break out if either the HW state says it is + * in the state we want, or if HOST_COMPLETE command + * finishes */ + if ((card_state == state) || + ((priv->status & STATUS_ENABLED) ? + IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) { + if (state == IPW_HW_STATE_ENABLED) + priv->status |= STATUS_ENABLED; + else + priv->status &= ~STATUS_ENABLED; + + return 0; + } + + udelay(50); + } + + IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n", + state ? "DISABLED" : "ENABLED"); + return -EIO; +} + + +/********************************************************************* + Procedure : sw_reset_and_clock + Purpose : Asserts s/w reset, asserts clock initialization + and waits for clock stabilization + ********************************************************************/ +static int sw_reset_and_clock(struct ipw2100_priv *priv) +{ + int i; + u32 r; + + // assert s/w reset + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + // wait for clock stabilization + for (i = 0; i < 1000; i++) { + udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY); + + // check clock ready bit + read_register(priv->net_dev, IPW_REG_RESET_REG, &r); + if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET) + break; + } + + if (i == 1000) + return -EIO; // TODO: better error value + + /* set "initialization complete" bit to move adapter to + * D0 state */ + write_register(priv->net_dev, IPW_REG_GP_CNTRL, + IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE); + + /* wait for clock stabilization */ + for (i = 0; i < 10000; i++) { + udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4); + + /* check clock ready bit */ + read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); + if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY) + break; + } + + if (i == 10000) + return -EIO; /* TODO: better error value */ + + /* set D0 standby bit */ + read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); + write_register(priv->net_dev, IPW_REG_GP_CNTRL, + r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); + + return 0; +} + +/********************************************************************* + Procedure : ipw2100_download_firmware + Purpose : Initiaze adapter after power on. + The sequence is: + 1. assert s/w reset first! + 2. awake clocks & wait for clock stabilization + 3. hold ARC (don't ask me why...) + 4. load Dino ucode and reset/clock init again + 5. zero-out shared mem + 6. download f/w + *******************************************************************/ +static int ipw2100_download_firmware(struct ipw2100_priv *priv) +{ + u32 address; + int err; + +#ifndef CONFIG_PM + /* Fetch the firmware and microcode */ + struct ipw2100_fw ipw2100_firmware; +#endif + + if (priv->fatal_error) { + IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after " + "fatal error %d. Interface must be brought down.\n", + priv->net_dev->name, priv->fatal_error); + return -EINVAL; + } + +#ifdef CONFIG_PM + if (!ipw2100_firmware.version) { + err = ipw2100_get_firmware(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", + priv->net_dev->name, err); + priv->fatal_error = IPW2100_ERR_FW_LOAD; + goto fail; + } + } +#else + err = ipw2100_get_firmware(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", + priv->net_dev->name, err); + priv->fatal_error = IPW2100_ERR_FW_LOAD; + goto fail; + } +#endif + priv->firmware_version = ipw2100_firmware.version; + + /* s/w reset and clock stabilization */ + err = sw_reset_and_clock(priv); + if (err) { + IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + err = ipw2100_verify(priv); + if (err) { + IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* Hold ARC */ + write_nic_dword(priv->net_dev, + IPW_INTERNAL_REGISTER_HALT_AND_RESET, + 0x80000000); + + /* allow ARC to run */ + write_register(priv->net_dev, IPW_REG_RESET_REG, 0); + + /* load microcode */ + err = ipw2100_ucode_download(priv, &ipw2100_firmware); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* release ARC */ + write_nic_dword(priv->net_dev, + IPW_INTERNAL_REGISTER_HALT_AND_RESET, + 0x00000000); + + /* s/w reset and clock stabilization (again!!!) */ + err = sw_reset_and_clock(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: sw_reset_and_clock failed: %d\n", + priv->net_dev->name, err); + goto fail; + } + + /* load f/w */ + err = ipw2100_fw_download(priv, &ipw2100_firmware); + if (err) { + IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n", + priv->net_dev->name, err); + goto fail; + } + +#ifndef CONFIG_PM + /* + * When the .resume method of the driver is called, the other + * part of the system, i.e. the ide driver could still stay in + * the suspend stage. This prevents us from loading the firmware + * from the disk. --YZ + */ + + /* free any storage allocated for firmware image */ + ipw2100_release_firmware(priv, &ipw2100_firmware); +#endif + + /* zero out Domain 1 area indirectly (Si requirement) */ + for (address = IPW_HOST_FW_SHARED_AREA0; + address < IPW_HOST_FW_SHARED_AREA0_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA1; + address < IPW_HOST_FW_SHARED_AREA1_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA2; + address < IPW_HOST_FW_SHARED_AREA2_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_SHARED_AREA3; + address < IPW_HOST_FW_SHARED_AREA3_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + for (address = IPW_HOST_FW_INTERRUPT_AREA; + address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4) + write_nic_dword(priv->net_dev, address, 0); + + return 0; + + fail: + ipw2100_release_firmware(priv, &ipw2100_firmware); + return err; +} + +static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv) +{ + if (priv->status & STATUS_INT_ENABLED) + return; + priv->status |= STATUS_INT_ENABLED; + write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK); +} + +static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv) +{ + if (!(priv->status & STATUS_INT_ENABLED)) + return; + priv->status &= ~STATUS_INT_ENABLED; + write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0); +} + + +static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv) +{ + struct ipw2100_ordinals *ord = &priv->ordinals; + + IPW_DEBUG_INFO("enter\n"); + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1, + &ord->table1_addr); + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2, + &ord->table2_addr); + + read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size); + read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size); + + ord->table2_size &= 0x0000FFFF; + + IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size); + IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size); + IPW_DEBUG_INFO("exit\n"); +} + +static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv) +{ + u32 reg = 0; + /* + * Set GPIO 3 writable by FW; GPIO 1 writable + * by driver and enable clock + */ + reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE | + IPW_BIT_GPIO_LED_OFF); + write_register(priv->net_dev, IPW_REG_GPIO, reg); +} + +static inline int rf_kill_active(struct ipw2100_priv *priv) +{ +#define MAX_RF_KILL_CHECKS 5 +#define RF_KILL_CHECK_DELAY 40 + + unsigned short value = 0; + u32 reg = 0; + int i; + + if (!(priv->hw_features & HW_FEATURE_RFKILL)) { + priv->status &= ~STATUS_RF_KILL_HW; + return 0; + } + + for (i = 0; i < MAX_RF_KILL_CHECKS; i++) { + udelay(RF_KILL_CHECK_DELAY); + read_register(priv->net_dev, IPW_REG_GPIO, ®); + value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1); + } + + if (value == 0) + priv->status |= STATUS_RF_KILL_HW; + else + priv->status &= ~STATUS_RF_KILL_HW; + + return (value == 0); +} + +static int ipw2100_get_hw_features(struct ipw2100_priv *priv) +{ + u32 addr, len; + u32 val; + + /* + * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1 + */ + len = sizeof(addr); + if (ipw2100_get_ordinal( + priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, + &addr, &len)) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return -EIO; + } + + IPW_DEBUG_INFO("EEPROM address: %08X\n", addr); + + /* + * EEPROM version is the byte at offset 0xfd in firmware + * We read 4 bytes, then shift out the byte we actually want */ + read_nic_dword(priv->net_dev, addr + 0xFC, &val); + priv->eeprom_version = (val >> 24) & 0xFF; + IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version); + + /* + * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware + * + * notice that the EEPROM bit is reverse polarity, i.e. + * bit = 0 signifies HW RF kill switch is supported + * bit = 1 signifies HW RF kill switch is NOT supported + */ + read_nic_dword(priv->net_dev, addr + 0x20, &val); + if (!((val >> 24) & 0x01)) + priv->hw_features |= HW_FEATURE_RFKILL; + + IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n", + (priv->hw_features & HW_FEATURE_RFKILL) ? + "" : "not "); + + return 0; +} + +/* + * Start firmware execution after power on and intialization + * The sequence is: + * 1. Release ARC + * 2. Wait for f/w initialization completes; + */ +static int ipw2100_start_adapter(struct ipw2100_priv *priv) +{ + int i; + u32 inta, inta_mask, gpio; + + IPW_DEBUG_INFO("enter\n"); + + if (priv->status & STATUS_RUNNING) + return 0; + + /* + * Initialize the hw - drive adapter to DO state by setting + * init_done bit. Wait for clk_ready bit and Download + * fw & dino ucode + */ + if (ipw2100_download_firmware(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to power on the adapter.\n", + priv->net_dev->name); + return -EIO; + } + + /* Clear the Tx, Rx and Msg queues and the r/w indexes + * in the firmware RBD and TBD ring queue */ + ipw2100_queues_initialize(priv); + + ipw2100_hw_set_gpio(priv); + + /* TODO -- Look at disabling interrupts here to make sure none + * get fired during FW initialization */ + + /* Release ARC - clear reset bit */ + write_register(priv->net_dev, IPW_REG_RESET_REG, 0); + + /* wait for f/w intialization complete */ + IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); + i = 5000; + do { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(40 * HZ / 1000); + /* Todo... wait for sync command ... */ + + read_register(priv->net_dev, IPW_REG_INTA, &inta); + + /* check "init done" bit */ + if (inta & IPW2100_INTA_FW_INIT_DONE) { + /* reset "init done" bit */ + write_register(priv->net_dev, IPW_REG_INTA, + IPW2100_INTA_FW_INIT_DONE); + break; + } + + /* check error conditions : we check these after the firmware + * check so that if there is an error, the interrupt handler + * will see it and the adapter will be reset */ + if (inta & + (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) { + /* clear error conditions */ + write_register(priv->net_dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR); + } + } while (i--); + + /* Clear out any pending INTAs since we aren't supposed to have + * interrupts enabled at this point... */ + read_register(priv->net_dev, IPW_REG_INTA, &inta); + read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); + inta &= IPW_INTERRUPT_MASK; + /* Clear out any pending interrupts */ + if (inta & inta_mask) + write_register(priv->net_dev, IPW_REG_INTA, inta); + + IPW_DEBUG_FW("f/w initialization complete: %s\n", + i ? "SUCCESS" : "FAILED"); + + if (!i) { + printk(KERN_WARNING DRV_NAME ": %s: Firmware did not initialize.\n", + priv->net_dev->name); + return -EIO; + } + + /* allow firmware to write to GPIO1 & GPIO3 */ + read_register(priv->net_dev, IPW_REG_GPIO, &gpio); + + gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK); + + write_register(priv->net_dev, IPW_REG_GPIO, gpio); + + /* Ready to receive commands */ + priv->status |= STATUS_RUNNING; + + /* The adapter has been reset; we are not associated */ + priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv) +{ + if (!priv->fatal_error) + return; + + priv->fatal_errors[priv->fatal_index++] = priv->fatal_error; + priv->fatal_index %= IPW2100_ERROR_QUEUE; + priv->fatal_error = 0; +} + + +/* NOTE: Our interrupt is disabled when this method is called */ +static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) +{ + u32 reg; + int i; + + IPW_DEBUG_INFO("Power cycling the hardware.\n"); + + ipw2100_hw_set_gpio(priv); + + /* Step 1. Stop Master Assert */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + + /* Step 2. Wait for stop Master Assert + * (not more then 50us, otherwise ret error */ + i = 5; + do { + udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } while(i--); + + priv->status &= ~STATUS_RESET_PENDING; + + if (!i) { + IPW_DEBUG_INFO("exit - waited too long for master assert stop\n"); + return -EIO; + } + + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + + /* Reset any fatal_error conditions */ + ipw2100_reset_fatalerror(priv); + + /* At this point, the adapter is now stopped and disabled */ + priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING | + STATUS_ASSOCIATED | STATUS_ENABLED); + + return 0; +} + +/* + * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it + * + * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. + * + * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of + * if STATUS_ASSN_LOST is sent. + */ +static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) +{ + +#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000) + + struct host_command cmd = { + .host_command = CARD_DISABLE_PHY_OFF, + .host_command_sequence = 0, + .host_command_length = 0, + }; + int err, i; + u32 val1, val2; + + IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n"); + + /* Turn off the radio */ + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + for (i = 0; i < 2500; i++) { + read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1); + read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2); + + if ((val1 & IPW2100_CONTROL_PHY_OFF) && + (val2 & IPW2100_COMMAND_PHY_OFF)) + return 0; + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HW_PHY_OFF_LOOP_DELAY); + } + + return -EIO; +} + + +static int ipw2100_enable_adapter(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = HOST_COMPLETE, + .host_command_sequence = 0, + .host_command_length = 0 + }; + int err = 0; + + IPW_DEBUG_HC("HOST_COMPLETE\n"); + + if (priv->status & STATUS_ENABLED) + return 0; + + down(&priv->adapter_sem); + + if (rf_kill_active(priv)) { + IPW_DEBUG_HC("Command aborted due to RF kill active.\n"); + goto fail_up; + } + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n"); + goto fail_up; + } + + err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED); + if (err) { + IPW_DEBUG_INFO( + "%s: card not responding to init command.\n", + priv->net_dev->name); + goto fail_up; + } + + if (priv->stop_hang_check) { + priv->stop_hang_check = 0; + queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2); + } + +fail_up: + up(&priv->adapter_sem); + return err; +} + +static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) +{ +#define HW_POWER_DOWN_DELAY (HZ / 10) + + struct host_command cmd = { + .host_command = HOST_PRE_POWER_DOWN, + .host_command_sequence = 0, + .host_command_length = 0, + }; + int err, i; + u32 reg; + + if (!(priv->status & STATUS_RUNNING)) + return 0; + + priv->status |= STATUS_STOPPING; + + /* We can only shut down the card if the firmware is operational. So, + * if we haven't reset since a fatal_error, then we can not send the + * shutdown commands. */ + if (!priv->fatal_error) { + /* First, make sure the adapter is enabled so that the PHY_OFF + * command can shut it down */ + ipw2100_enable_adapter(priv); + + err = ipw2100_hw_phy_off(priv); + if (err) + printk(KERN_WARNING DRV_NAME ": Error disabling radio %d\n", err); + + /* + * If in D0-standby mode going directly to D3 may cause a + * PCI bus violation. Therefore we must change out of the D0 + * state. + * + * Sending the PREPARE_FOR_POWER_DOWN will restrict the + * hardware from going into standby mode and will transition + * out of D0-standy if it is already in that state. + * + * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the + * driver upon completion. Once received, the driver can + * proceed to the D3 state. + * + * Prepare for power down command to fw. This command would + * take HW out of D0-standby and prepare it for D3 state. + * + * Currently FW does not support event notification for this + * event. Therefore, skip waiting for it. Just wait a fixed + * 100ms + */ + IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n"); + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + printk(KERN_WARNING DRV_NAME ": " + "%s: Power down command failed: Error %d\n", + priv->net_dev->name, err); + else { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HW_POWER_DOWN_DELAY); + } + } + + priv->status &= ~STATUS_ENABLED; + + /* + * Set GPIO 3 writable by FW; GPIO 1 writable + * by driver and enable clock + */ + ipw2100_hw_set_gpio(priv); + + /* + * Power down adapter. Sequence: + * 1. Stop master assert (RESET_REG[9]=1) + * 2. Wait for stop master (RESET_REG[8]==1) + * 3. S/w reset assert (RESET_REG[7] = 1) + */ + + /* Stop master assert */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + + /* wait stop master not more than 50 usec. + * Otherwise return error. */ + for (i = 5; i > 0; i--) { + udelay(10); + + /* Check master stop bit */ + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } + + if (i == 0) + printk(KERN_WARNING DRV_NAME + ": %s: Could now power down adapter.\n", + priv->net_dev->name); + + /* assert s/w reset */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_SW_RESET); + + priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING); + + return 0; +} + + +static int ipw2100_disable_adapter(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = CARD_DISABLE, + .host_command_sequence = 0, + .host_command_length = 0 + }; + int err = 0; + + IPW_DEBUG_HC("CARD_DISABLE\n"); + + if (!(priv->status & STATUS_ENABLED)) + return 0; + + /* Make sure we clear the associated state */ + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + + if (!priv->stop_hang_check) { + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + } + + down(&priv->adapter_sem); + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + printk(KERN_WARNING DRV_NAME ": exit - failed to send CARD_DISABLE command\n"); + goto fail_up; + } + + err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED); + if (err) { + printk(KERN_WARNING DRV_NAME ": exit - card failed to change to DISABLED\n"); + goto fail_up; + } + + IPW_DEBUG_INFO("TODO: implement scan state machine\n"); + +fail_up: + up(&priv->adapter_sem); + return err; +} + +static int ipw2100_set_scan_options(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = SET_SCAN_OPTIONS, + .host_command_sequence = 0, + .host_command_length = 8 + }; + int err; + + IPW_DEBUG_INFO("enter\n"); + + IPW_DEBUG_SCAN("setting scan options\n"); + + cmd.host_command_parameters[0] = 0; + + if (!(priv->config & CFG_ASSOCIATE)) + cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE; + if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled) + cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL; + if (priv->config & CFG_PASSIVE_SCAN) + cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE; + + cmd.host_command_parameters[1] = priv->channel_mask; + + err = ipw2100_hw_send_command(priv, &cmd); + + IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n", + cmd.host_command_parameters[0]); + + return err; +} + +static int ipw2100_start_scan(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = BROADCAST_SCAN, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + IPW_DEBUG_HC("START_SCAN\n"); + + cmd.host_command_parameters[0] = 0; + + /* No scanning if in monitor mode */ + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + return 1; + + if (priv->status & STATUS_SCANNING) { + IPW_DEBUG_SCAN("Scan requested while already in scan...\n"); + return 0; + } + + IPW_DEBUG_INFO("enter\n"); + + /* Not clearing here; doing so makes iwlist always return nothing... + * + * We should modify the table logic to use aging tables vs. clearing + * the table on each scan start. + */ + IPW_DEBUG_SCAN("starting scan\n"); + + priv->status |= STATUS_SCANNING; + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + priv->status &= ~STATUS_SCANNING; + + IPW_DEBUG_INFO("exit\n"); + + return err; +} + +static int ipw2100_up(struct ipw2100_priv *priv, int deferred) +{ + unsigned long flags; + int rc = 0; + u32 lock; + u32 ord_len = sizeof(lock); + + /* Quite if manually disabled. */ + if (priv->status & STATUS_RF_KILL_SW) { + IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable " + "switch\n", priv->net_dev->name); + return 0; + } + + /* If the interrupt is enabled, turn it off... */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + + /* Reset any fatal_error conditions */ + ipw2100_reset_fatalerror(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + + if (priv->status & STATUS_POWERED || + (priv->status & STATUS_RESET_PENDING)) { + /* Power cycle the card ... */ + if (ipw2100_power_cycle_adapter(priv)) { + printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + } else + priv->status |= STATUS_POWERED; + + /* Load the firmware, start the clocks, etc. */ + if (ipw2100_start_adapter(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + ipw2100_initialize_ordinals(priv); + + /* Determine capabilities of this particular HW configuration */ + if (ipw2100_get_hw_features(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + lock = LOCK_NONE; + if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + priv->status &= ~STATUS_SCANNING; + + if (rf_kill_active(priv)) { + printk(KERN_INFO "%s: Radio is disabled by RF switch.\n", + priv->net_dev->name); + + if (priv->stop_rf_kill) { + priv->stop_rf_kill = 0; + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); + } + + deferred = 1; + } + + /* Turn on the interrupt so that commands can be processed */ + ipw2100_enable_interrupts(priv); + + /* Send all of the commands that must be sent prior to + * HOST_COMPLETE */ + if (ipw2100_adapter_setup(priv)) { + printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", + priv->net_dev->name); + rc = 1; + goto exit; + } + + if (!deferred) { + /* Enable the adapter - sends HOST_COMPLETE */ + if (ipw2100_enable_adapter(priv)) { + printk(KERN_ERR DRV_NAME ": " + "%s: failed in call to enable adapter.\n", + priv->net_dev->name); + ipw2100_hw_stop_adapter(priv); + rc = 1; + goto exit; + } + + + /* Start a scan . . . */ + ipw2100_set_scan_options(priv); + ipw2100_start_scan(priv); + } + + exit: + return rc; +} + +/* Called by register_netdev() */ +static int ipw2100_net_init(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ipw2100_up(priv, 1); +} + +static void ipw2100_down(struct ipw2100_priv *priv) +{ + unsigned long flags; + union iwreq_data wrqu = { + .ap_addr = { + .sa_family = ARPHRD_ETHER + } + }; + int associated = priv->status & STATUS_ASSOCIATED; + + /* Kill the RF switch timer */ + if (!priv->stop_rf_kill) { + priv->stop_rf_kill = 1; + cancel_delayed_work(&priv->rf_kill); + } + + /* Kill the firmare hang check timer */ + if (!priv->stop_hang_check) { + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + } + + /* Kill any pending resets */ + if (priv->status & STATUS_RESET_PENDING) + cancel_delayed_work(&priv->reset_work); + + /* Make sure the interrupt is on so that FW commands will be + * processed correctly */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_enable_interrupts(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + + if (ipw2100_hw_stop_adapter(priv)) + printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", + priv->net_dev->name); + + /* Do not disable the interrupt until _after_ we disable + * the adaptor. Otherwise the CARD_DISABLE command will never + * be ack'd by the firmware */ + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->low_lock, flags); + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + if (priv->config & CFG_C3_DISABLED) { + IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n"); + acpi_set_cstate_limit(priv->cstate_limit); + priv->config &= ~CFG_C3_DISABLED; + } +#endif + + /* We have to signal any supplicant if we are disassociating */ + if (associated) + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); + + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); +} + +static void ipw2100_reset_adapter(struct ipw2100_priv *priv) +{ + unsigned long flags; + union iwreq_data wrqu = { + .ap_addr = { + .sa_family = ARPHRD_ETHER + } + }; + int associated = priv->status & STATUS_ASSOCIATED; + + spin_lock_irqsave(&priv->low_lock, flags); + IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n", + priv->net_dev->name); + priv->resets++; + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + priv->status |= STATUS_SECURITY_UPDATED; + + /* Force a power cycle even if interface hasn't been opened + * yet */ + cancel_delayed_work(&priv->reset_work); + priv->status |= STATUS_RESET_PENDING; + spin_unlock_irqrestore(&priv->low_lock, flags); + + down(&priv->action_sem); + /* stop timed checks so that they don't interfere with reset */ + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->hang_check); + + /* We have to signal any supplicant if we are disassociating */ + if (associated) + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); + + ipw2100_up(priv, 0); + up(&priv->action_sem); + +} + + +static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) +{ + +#define MAC_ASSOCIATION_READ_DELAY (HZ) + int ret, len, essid_len; + char essid[IW_ESSID_MAX_SIZE]; + u32 txrate; + u32 chan; + char *txratename; + u8 bssid[ETH_ALEN]; + + /* + * TBD: BSSID is usually 00:00:00:00:00:00 here and not + * an actual MAC of the AP. Seems like FW sets this + * address too late. Read it later and expose through + * /proc or schedule a later task to query and update + */ + + essid_len = IW_ESSID_MAX_SIZE; + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, + essid, &essid_len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + + len = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, + &txrate, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + + len = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + len = ETH_ALEN; + ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + if (ret) { + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + return; + } + memcpy(priv->ieee->bssid, bssid, ETH_ALEN); + + + switch (txrate) { + case TX_RATE_1_MBIT: + txratename = "1Mbps"; + break; + case TX_RATE_2_MBIT: + txratename = "2Mbsp"; + break; + case TX_RATE_5_5_MBIT: + txratename = "5.5Mbps"; + break; + case TX_RATE_11_MBIT: + txratename = "11Mbps"; + break; + default: + IPW_DEBUG_INFO("Unknown rate: %d\n", txrate); + txratename = "unknown rate"; + break; + } + + IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=" + MAC_FMT ")\n", + priv->net_dev->name, escape_essid(essid, essid_len), + txratename, chan, MAC_ARG(bssid)); + + /* now we copy read ssid into dev */ + if (!(priv->config & CFG_STATIC_ESSID)) { + priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE); + memcpy(priv->essid, essid, priv->essid_len); + } + priv->channel = chan; + memcpy(priv->bssid, bssid, ETH_ALEN); + + priv->status |= STATUS_ASSOCIATING; + priv->connect_start = get_seconds(); + + queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10); +} + + +static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid, + int length, int batch_mode) +{ + int ssid_len = min(length, IW_ESSID_MAX_SIZE); + struct host_command cmd = { + .host_command = SSID, + .host_command_sequence = 0, + .host_command_length = ssid_len + }; + int err; + + IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len)); + + if (ssid_len) + memcpy((char*)cmd.host_command_parameters, + essid, ssid_len); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to + * disable auto association -- so we cheat by setting a bogus SSID */ + if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) { + int i; + u8 *bogus = (u8*)cmd.host_command_parameters; + for (i = 0; i < IW_ESSID_MAX_SIZE; i++) + bogus[i] = 0x18 + i; + cmd.host_command_length = IW_ESSID_MAX_SIZE; + } + + /* NOTE: We always send the SSID command even if the provided ESSID is + * the same as what we currently think is set. */ + + err = ipw2100_hw_send_command(priv, &cmd); + if (!err) { + memset(priv->essid + ssid_len, 0, + IW_ESSID_MAX_SIZE - ssid_len); + memcpy(priv->essid, essid, ssid_len); + priv->essid_len = ssid_len; + } + + if (!batch_mode) { + if (ipw2100_enable_adapter(priv)) + err = -EIO; + } + + return err; +} + +static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC, + "disassociated: '%s' " MAC_FMT " \n", + escape_essid(priv->essid, priv->essid_len), + MAC_ARG(priv->bssid)); + + priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); + + if (priv->status & STATUS_STOPPING) { + IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n"); + return; + } + + memset(priv->bssid, 0, ETH_ALEN); + memset(priv->ieee->bssid, 0, ETH_ALEN); + + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + + if (!(priv->status & STATUS_RUNNING)) + return; + + if (priv->status & STATUS_SECURITY_UPDATED) + queue_work(priv->workqueue, &priv->security_work); + + queue_work(priv->workqueue, &priv->wx_event_work); +} + +static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n", + priv->net_dev->name); + + /* RF_KILL is now enabled (else we wouldn't be here) */ + priv->status |= STATUS_RF_KILL_HW; + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + if (priv->config & CFG_C3_DISABLED) { + IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n"); + acpi_set_cstate_limit(priv->cstate_limit); + priv->config &= ~CFG_C3_DISABLED; + } +#endif + + /* Make sure the RF Kill check timer is running */ + priv->stop_rf_kill = 0; + cancel_delayed_work(&priv->rf_kill); + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); +} + +static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_SCAN("scan complete\n"); + /* Age the scan results... */ + priv->ieee->scans++; + priv->status &= ~STATUS_SCANNING; +} + +#ifdef CONFIG_IPW_DEBUG +#define IPW2100_HANDLER(v, f) { v, f, # v } +struct ipw2100_status_indicator { + int status; + void (*cb)(struct ipw2100_priv *priv, u32 status); + char *name; +}; +#else +#define IPW2100_HANDLER(v, f) { v, f } +struct ipw2100_status_indicator { + int status; + void (*cb)(struct ipw2100_priv *priv, u32 status); +}; +#endif /* CONFIG_IPW_DEBUG */ + +static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) +{ + IPW_DEBUG_SCAN("Scanning...\n"); + priv->status |= STATUS_SCANNING; +} + +static const struct ipw2100_status_indicator status_handlers[] = { + IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL), + IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL), + IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated), + IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost), + IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL), + IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete), + IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL), + IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL), + IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill), + IPW2100_HANDLER(IPW_STATE_DISABLED, NULL), + IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL), + IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning), + IPW2100_HANDLER(-1, NULL) +}; + + +static void isr_status_change(struct ipw2100_priv *priv, int status) +{ + int i; + + if (status == IPW_STATE_SCANNING && + priv->status & STATUS_ASSOCIATED && + !(priv->status & STATUS_SCANNING)) { + IPW_DEBUG_INFO("Scan detected while associated, with " + "no scan request. Restarting firmware.\n"); + + /* Wake up any sleeping jobs */ + schedule_reset(priv); + } + + for (i = 0; status_handlers[i].status != -1; i++) { + if (status == status_handlers[i].status) { + IPW_DEBUG_NOTIF("Status change: %s\n", + status_handlers[i].name); + if (status_handlers[i].cb) + status_handlers[i].cb(priv, status); + priv->wstats.status = status; + return; + } + } + + IPW_DEBUG_NOTIF("unknown status received: %04x\n", status); +} + +static void isr_rx_complete_command( + struct ipw2100_priv *priv, + struct ipw2100_cmd_header *cmd) +{ +#ifdef CONFIG_IPW_DEBUG + if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { + IPW_DEBUG_HC("Command completed '%s (%d)'\n", + command_types[cmd->host_command_reg], + cmd->host_command_reg); + } +#endif + if (cmd->host_command_reg == HOST_COMPLETE) + priv->status |= STATUS_ENABLED; + + if (cmd->host_command_reg == CARD_DISABLE) + priv->status &= ~STATUS_ENABLED; + + priv->status &= ~STATUS_CMD_ACTIVE; + + wake_up_interruptible(&priv->wait_command_queue); +} + +#ifdef CONFIG_IPW_DEBUG +static const char *frame_types[] = { + "COMMAND_STATUS_VAL", + "STATUS_CHANGE_VAL", + "P80211_DATA_VAL", + "P8023_DATA_VAL", + "HOST_NOTIFICATION_VAL" +}; +#endif + + +static inline int ipw2100_alloc_skb( + struct ipw2100_priv *priv, + struct ipw2100_rx_packet *packet) +{ + packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx)); + if (!packet->skb) + return -ENOMEM; + + packet->rxp = (struct ipw2100_rx *)packet->skb->data; + packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + /* NOTE: pci_map_single does not return an error code, and 0 is a valid + * dma_addr */ + + return 0; +} + + +#define SEARCH_ERROR 0xffffffff +#define SEARCH_FAIL 0xfffffffe +#define SEARCH_SUCCESS 0xfffffff0 +#define SEARCH_DISCARD 0 +#define SEARCH_SNAPSHOT 1 + +#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff)) +static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv) +{ + int i; + if (priv->snapshot[0]) + return 1; + for (i = 0; i < 0x30; i++) { + priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC); + if (!priv->snapshot[i]) { + IPW_DEBUG_INFO("%s: Error allocating snapshot " + "buffer %d\n", priv->net_dev->name, i); + while (i > 0) + kfree(priv->snapshot[--i]); + priv->snapshot[0] = NULL; + return 0; + } + } + + return 1; +} + +static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv) +{ + int i; + if (!priv->snapshot[0]) + return; + for (i = 0; i < 0x30; i++) + kfree(priv->snapshot[i]); + priv->snapshot[0] = NULL; +} + +static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf, + size_t len, int mode) +{ + u32 i, j; + u32 tmp; + u8 *s, *d; + u32 ret; + + s = in_buf; + if (mode == SEARCH_SNAPSHOT) { + if (!ipw2100_snapshot_alloc(priv)) + mode = SEARCH_DISCARD; + } + + for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) { + read_nic_dword(priv->net_dev, i, &tmp); + if (mode == SEARCH_SNAPSHOT) + *(u32 *)SNAPSHOT_ADDR(i) = tmp; + if (ret == SEARCH_FAIL) { + d = (u8*)&tmp; + for (j = 0; j < 4; j++) { + if (*s != *d) { + s = in_buf; + continue; + } + + s++; + d++; + + if ((s - in_buf) == len) + ret = (i + j) - len + 1; + } + } else if (mode == SEARCH_DISCARD) + return ret; + } + + return ret; +} + +/* + * + * 0) Disconnect the SKB from the firmware (just unmap) + * 1) Pack the ETH header into the SKB + * 2) Pass the SKB to the network stack + * + * When packet is provided by the firmware, it contains the following: + * + * . ieee80211_hdr + * . ieee80211_snap_hdr + * + * The size of the constructed ethernet + * + */ +#ifdef CONFIG_IPW2100_RX_DEBUG +static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; +#endif + +static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, + int i) +{ +#ifdef CONFIG_IPW_DEBUG_C3 + struct ipw2100_status *status = &priv->status_queue.drv[i]; + u32 match, reg; + int j; +#endif +#ifdef ACPI_CSTATE_LIMIT_DEFINED + int limit; +#endif + + IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at " + "0x%04zX.\n", i * sizeof(struct ipw2100_status)); + +#ifdef ACPI_CSTATE_LIMIT_DEFINED + IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n"); + limit = acpi_get_cstate_limit(); + if (limit > 2) { + priv->cstate_limit = limit; + acpi_set_cstate_limit(2); + priv->config |= CFG_C3_DISABLED; + } +#endif + +#ifdef CONFIG_IPW_DEBUG_C3 + /* Halt the fimrware so we can get a good image */ + write_register(priv->net_dev, IPW_REG_RESET_REG, + IPW_AUX_HOST_RESET_REG_STOP_MASTER); + j = 5; + do { + udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); + read_register(priv->net_dev, IPW_REG_RESET_REG, ®); + + if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) + break; + } while (j--); + + match = ipw2100_match_buf(priv, (u8*)status, + sizeof(struct ipw2100_status), + SEARCH_SNAPSHOT); + if (match < SEARCH_SUCCESS) + IPW_DEBUG_INFO("%s: DMA status match in Firmware at " + "offset 0x%06X, length %d:\n", + priv->net_dev->name, match, + sizeof(struct ipw2100_status)); + else + IPW_DEBUG_INFO("%s: No DMA status match in " + "Firmware.\n", priv->net_dev->name); + + printk_buf((u8*)priv->status_queue.drv, + sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH); +#endif + + priv->fatal_error = IPW2100_ERR_C3_CORRUPTION; + priv->ieee->stats.rx_errors++; + schedule_reset(priv); +} + +static inline void isr_rx(struct ipw2100_priv *priv, int i, + struct ieee80211_rx_stats *stats) +{ + struct ipw2100_status *status = &priv->status_queue.drv[i]; + struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; + + IPW_DEBUG_RX("Handler...\n"); + + if (unlikely(status->frame_size > skb_tailroom(packet->skb))) { + IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" + " Dropping.\n", + priv->net_dev->name, + status->frame_size, skb_tailroom(packet->skb)); + priv->ieee->stats.rx_errors++; + return; + } + + if (unlikely(!netif_running(priv->net_dev))) { + priv->ieee->stats.rx_errors++; + priv->wstats.discard.misc++; + IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); + return; + } + + if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR && + status->flags & IPW_STATUS_FLAG_CRC_ERROR)) { + IPW_DEBUG_RX("CRC error in packet. Dropping.\n"); + priv->ieee->stats.rx_errors++; + return; + } + + if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR && + !(priv->status & STATUS_ASSOCIATED))) { + IPW_DEBUG_DROP("Dropping packet while not associated.\n"); + priv->wstats.discard.misc++; + return; + } + + + pci_unmap_single(priv->pci_dev, + packet->dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + + skb_put(packet->skb, status->frame_size); + +#ifdef CONFIG_IPW2100_RX_DEBUG + /* Make a copy of the frame so we can dump it to the logs if + * ieee80211_rx fails */ + memcpy(packet_data, packet->skb->data, + min_t(u32, status->frame_size, IPW_RX_NIC_BUFFER_LENGTH)); +#endif + + if (!ieee80211_rx(priv->ieee, packet->skb, stats)) { +#ifdef CONFIG_IPW2100_RX_DEBUG + IPW_DEBUG_DROP("%s: Non consumed packet:\n", + priv->net_dev->name); + printk_buf(IPW_DL_DROP, packet_data, status->frame_size); +#endif + priv->ieee->stats.rx_errors++; + + /* ieee80211_rx failed, so it didn't free the SKB */ + dev_kfree_skb_any(packet->skb); + packet->skb = NULL; + } + + /* We need to allocate a new SKB and attach it to the RDB. */ + if (unlikely(ipw2100_alloc_skb(priv, packet))) { + printk(KERN_WARNING DRV_NAME ": " + "%s: Unable to allocate SKB onto RBD ring - disabling " + "adapter.\n", priv->net_dev->name); + /* TODO: schedule adapter shutdown */ + IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); + } + + /* Update the RDB entry */ + priv->rx_queue.drv[i].host_addr = packet->dma_addr; +} + +static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i) +{ + struct ipw2100_status *status = &priv->status_queue.drv[i]; + struct ipw2100_rx *u = priv->rx_buffers[i].rxp; + u16 frame_type = status->status_fields & STATUS_TYPE_MASK; + + switch (frame_type) { + case COMMAND_STATUS_VAL: + return (status->frame_size != sizeof(u->rx_data.command)); + case STATUS_CHANGE_VAL: + return (status->frame_size != sizeof(u->rx_data.status)); + case HOST_NOTIFICATION_VAL: + return (status->frame_size < sizeof(u->rx_data.notification)); + case P80211_DATA_VAL: + case P8023_DATA_VAL: +#ifdef CONFIG_IPW2100_MONITOR + return 0; +#else + switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) { + case IEEE80211_FTYPE_MGMT: + case IEEE80211_FTYPE_CTL: + return 0; + case IEEE80211_FTYPE_DATA: + return (status->frame_size > + IPW_MAX_802_11_PAYLOAD_LENGTH); + } +#endif + } + + return 1; +} + +/* + * ipw2100 interrupts are disabled at this point, and the ISR + * is the only code that calls this method. So, we do not need + * to play with any locks. + * + * RX Queue works as follows: + * + * Read index - firmware places packet in entry identified by the + * Read index and advances Read index. In this manner, + * Read index will always point to the next packet to + * be filled--but not yet valid. + * + * Write index - driver fills this entry with an unused RBD entry. + * This entry has not filled by the firmware yet. + * + * In between the W and R indexes are the RBDs that have been received + * but not yet processed. + * + * The process of handling packets will start at WRITE + 1 and advance + * until it reaches the READ index. + * + * The WRITE index is cached in the variable 'priv->rx_queue.next'. + * + */ +static inline void __ipw2100_rx_process(struct ipw2100_priv *priv) +{ + struct ipw2100_bd_queue *rxq = &priv->rx_queue; + struct ipw2100_status_queue *sq = &priv->status_queue; + struct ipw2100_rx_packet *packet; + u16 frame_type; + u32 r, w, i, s; + struct ipw2100_rx *u; + struct ieee80211_rx_stats stats = { + .mac_time = jiffies, + }; + + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r); + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w); + + if (r >= rxq->entries) { + IPW_DEBUG_RX("exit - bad read index\n"); + return; + } + + i = (rxq->next + 1) % rxq->entries; + s = i; + while (i != r) { + /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n", + r, rxq->next, i); */ + + packet = &priv->rx_buffers[i]; + + /* Sync the DMA for the STATUS buffer so CPU is sure to get + * the correct values */ + pci_dma_sync_single_for_cpu( + priv->pci_dev, + sq->nic + sizeof(struct ipw2100_status) * i, + sizeof(struct ipw2100_status), + PCI_DMA_FROMDEVICE); + + /* Sync the DMA for the RX buffer so CPU is sure to get + * the correct values */ + pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + + if (unlikely(ipw2100_corruption_check(priv, i))) { + ipw2100_corruption_detected(priv, i); + goto increment; + } + + u = packet->rxp; + frame_type = sq->drv[i].status_fields & + STATUS_TYPE_MASK; + stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM; + stats.len = sq->drv[i].frame_size; + + stats.mask = 0; + if (stats.rssi != 0) + stats.mask |= IEEE80211_STATMASK_RSSI; + stats.freq = IEEE80211_24GHZ_BAND; + + IPW_DEBUG_RX( + "%s: '%s' frame type received (%d).\n", + priv->net_dev->name, frame_types[frame_type], + stats.len); + + switch (frame_type) { + case COMMAND_STATUS_VAL: + /* Reset Rx watchdog */ + isr_rx_complete_command( + priv, &u->rx_data.command); + break; + + case STATUS_CHANGE_VAL: + isr_status_change(priv, u->rx_data.status); + break; + + case P80211_DATA_VAL: + case P8023_DATA_VAL: +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + isr_rx(priv, i, &stats); + break; + } +#endif + if (stats.len < sizeof(u->rx_data.header)) + break; + switch (WLAN_FC_GET_TYPE(u->rx_data.header. + frame_ctl)) { + case IEEE80211_FTYPE_MGMT: + ieee80211_rx_mgt(priv->ieee, + &u->rx_data.header, + &stats); + break; + + case IEEE80211_FTYPE_CTL: + break; + + case IEEE80211_FTYPE_DATA: + isr_rx(priv, i, &stats); + break; + + } + break; + } + + increment: + /* clear status field associated with this RBD */ + rxq->drv[i].status.info.field = 0; + + i = (i + 1) % rxq->entries; + } + + if (i != s) { + /* backtrack one entry, wrapping to end if at 0 */ + rxq->next = (i ? i : rxq->entries) - 1; + + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, + rxq->next); + } +} + + +/* + * __ipw2100_tx_process + * + * This routine will determine whether the next packet on + * the fw_pend_list has been processed by the firmware yet. + * + * If not, then it does nothing and returns. + * + * If so, then it removes the item from the fw_pend_list, frees + * any associated storage, and places the item back on the + * free list of its source (either msg_free_list or tx_free_list) + * + * TX Queue works as follows: + * + * Read index - points to the next TBD that the firmware will + * process. The firmware will read the data, and once + * done processing, it will advance the Read index. + * + * Write index - driver fills this entry with an constructed TBD + * entry. The Write index is not advanced until the + * packet has been configured. + * + * In between the W and R indexes are the TBDs that have NOT been + * processed. Lagging behind the R index are packets that have + * been processed but have not been freed by the driver. + * + * In order to free old storage, an internal index will be maintained + * that points to the next packet to be freed. When all used + * packets have been freed, the oldest index will be the same as the + * firmware's read index. + * + * The OLDEST index is cached in the variable 'priv->tx_queue.oldest' + * + * Because the TBD structure can not contain arbitrary data, the + * driver must keep an internal queue of cached allocations such that + * it can put that data back into the tx_free_list and msg_free_list + * for use by future command and data packets. + * + */ +static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) +{ + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + struct list_head *element; + struct ipw2100_tx_packet *packet; + int descriptors_used; + int e, i; + u32 r, w, frag_num = 0; + + if (list_empty(&priv->fw_pend_list)) + return 0; + + element = priv->fw_pend_list.next; + + packet = list_entry(element, struct ipw2100_tx_packet, list); + tbd = &txq->drv[packet->index]; + + /* Determine how many TBD entries must be finished... */ + switch (packet->type) { + case COMMAND: + /* COMMAND uses only one slot; don't advance */ + descriptors_used = 1; + e = txq->oldest; + break; + + case DATA: + /* DATA uses two slots; advance and loop position. */ + descriptors_used = tbd->num_fragments; + frag_num = tbd->num_fragments - 1; + e = txq->oldest + frag_num; + e %= txq->entries; + break; + + default: + printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", + priv->net_dev->name); + return 0; + } + + /* if the last TBD is not done by NIC yet, then packet is + * not ready to be released. + * + */ + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, + &r); + read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + &w); + if (w != txq->next) + printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", + priv->net_dev->name); + + /* + * txq->next is the index of the last packet written txq->oldest is + * the index of the r is the index of the next packet to be read by + * firmware + */ + + + /* + * Quick graphic to help you visualize the following + * if / else statement + * + * ===>| s---->|=============== + * e>| + * | a | b | c | d | e | f | g | h | i | j | k | l + * r---->| + * w + * + * w - updated by driver + * r - updated by firmware + * s - start of oldest BD entry (txq->oldest) + * e - end of oldest BD entry + * + */ + if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) { + IPW_DEBUG_TX("exit - no processed packets ready to release.\n"); + return 0; + } + + list_del(element); + DEC_STAT(&priv->fw_pend_stat); + +#ifdef CONFIG_IPW_DEBUG + { + int i = txq->oldest; + IPW_DEBUG_TX( + "TX%d V=%p P=%04X T=%04X L=%d\n", i, + &txq->drv[i], + (u32)(txq->nic + i * sizeof(struct ipw2100_bd)), + txq->drv[i].host_addr, + txq->drv[i].buf_length); + + if (packet->type == DATA) { + i = (i + 1) % txq->entries; + + IPW_DEBUG_TX( + "TX%d V=%p P=%04X T=%04X L=%d\n", i, + &txq->drv[i], + (u32)(txq->nic + i * + sizeof(struct ipw2100_bd)), + (u32)txq->drv[i].host_addr, + txq->drv[i].buf_length); + } + } +#endif + + switch (packet->type) { + case DATA: + if (txq->drv[txq->oldest].status.info.fields.txType != 0) + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " + "Expecting DATA TBD but pulled " + "something else: ids %d=%d.\n", + priv->net_dev->name, txq->oldest, packet->index); + + /* DATA packet; we have to unmap and free the SKB */ + priv->ieee->stats.tx_packets++; + for (i = 0; i < frag_num; i++) { + tbd = &txq->drv[(packet->index + 1 + i) % + txq->entries]; + + IPW_DEBUG_TX( + "TX%d P=%08x L=%d\n", + (packet->index + 1 + i) % txq->entries, + tbd->host_addr, tbd->buf_length); + + pci_unmap_single(priv->pci_dev, + tbd->host_addr, + tbd->buf_length, + PCI_DMA_TODEVICE); + } + + priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size; + ieee80211_txb_free(packet->info.d_struct.txb); + packet->info.d_struct.txb = NULL; + + list_add_tail(element, &priv->tx_free_list); + INC_STAT(&priv->tx_free_stat); + + /* We have a free slot in the Tx queue, so wake up the + * transmit layer if it is stopped. */ + if (priv->status & STATUS_ASSOCIATED && + netif_queue_stopped(priv->net_dev)) { + IPW_DEBUG_INFO(KERN_INFO + "%s: Waking net queue.\n", + priv->net_dev->name); + netif_wake_queue(priv->net_dev); + } + + /* A packet was processed by the hardware, so update the + * watchdog */ + priv->net_dev->trans_start = jiffies; + + break; + + case COMMAND: + if (txq->drv[txq->oldest].status.info.fields.txType != 1) + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " + "Expecting COMMAND TBD but pulled " + "something else: ids %d=%d.\n", + priv->net_dev->name, txq->oldest, packet->index); + +#ifdef CONFIG_IPW_DEBUG + if (packet->info.c_struct.cmd->host_command_reg < + sizeof(command_types) / sizeof(*command_types)) + IPW_DEBUG_TX( + "Command '%s (%d)' processed: %d.\n", + command_types[packet->info.c_struct.cmd->host_command_reg], + packet->info.c_struct.cmd->host_command_reg, + packet->info.c_struct.cmd->cmd_status_reg); +#endif + + list_add_tail(element, &priv->msg_free_list); + INC_STAT(&priv->msg_free_stat); + break; + } + + /* advance oldest used TBD pointer to start of next entry */ + txq->oldest = (e + 1) % txq->entries; + /* increase available TBDs number */ + txq->available += descriptors_used; + SET_STAT(&priv->txq_stat, txq->available); + + IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n", + jiffies - packet->jiffy_start); + + return (!list_empty(&priv->fw_pend_list)); +} + + +static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv) +{ + int i = 0; + + while (__ipw2100_tx_process(priv) && i < 200) i++; + + if (i == 200) { + printk(KERN_WARNING DRV_NAME ": " + "%s: Driver is running slow (%d iters).\n", + priv->net_dev->name, i); + } +} + + +static void ipw2100_tx_send_commands(struct ipw2100_priv *priv) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + int next = txq->next; + + while (!list_empty(&priv->msg_pend_list)) { + /* if there isn't enough space in TBD queue, then + * don't stuff a new one in. + * NOTE: 3 are needed as a command will take one, + * and there is a minimum of 2 that must be + * maintained between the r and w indexes + */ + if (txq->available <= 3) { + IPW_DEBUG_TX("no room in tx_queue\n"); + break; + } + + element = priv->msg_pend_list.next; + list_del(element); + DEC_STAT(&priv->msg_pend_stat); + + packet = list_entry(element, + struct ipw2100_tx_packet, list); + + IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n", + &txq->drv[txq->next], + (void*)(txq->nic + txq->next * + sizeof(struct ipw2100_bd))); + + packet->index = txq->next; + + tbd = &txq->drv[txq->next]; + + /* initialize TBD */ + tbd->host_addr = packet->info.c_struct.cmd_phys; + tbd->buf_length = sizeof(struct ipw2100_cmd_header); + /* not marking number of fragments causes problems + * with f/w debug version */ + tbd->num_fragments = 1; + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_COMMAND | + IPW_BD_STATUS_TX_INTERRUPT_ENABLE; + + /* update TBD queue counters */ + txq->next++; + txq->next %= txq->entries; + txq->available--; + DEC_STAT(&priv->txq_stat); + + list_add_tail(element, &priv->fw_pend_list); + INC_STAT(&priv->fw_pend_stat); + } + + if (txq->next != next) { + /* kick off the DMA by notifying firmware the + * write index has moved; make sure TBD stores are sync'd */ + wmb(); + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + txq->next); + } +} + + +/* + * ipw2100_tx_send_data + * + */ +static void ipw2100_tx_send_data(struct ipw2100_priv *priv) +{ + struct list_head *element; + struct ipw2100_tx_packet *packet; + struct ipw2100_bd_queue *txq = &priv->tx_queue; + struct ipw2100_bd *tbd; + int next = txq->next; + int i = 0; + struct ipw2100_data_header *ipw_hdr; + struct ieee80211_hdr *hdr; + + while (!list_empty(&priv->tx_pend_list)) { + /* if there isn't enough space in TBD queue, then + * don't stuff a new one in. + * NOTE: 4 are needed as a data will take two, + * and there is a minimum of 2 that must be + * maintained between the r and w indexes + */ + element = priv->tx_pend_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + if (unlikely(1 + packet->info.d_struct.txb->nr_frags > + IPW_MAX_BDS)) { + /* TODO: Support merging buffers if more than + * IPW_MAX_BDS are used */ + IPW_DEBUG_INFO( + "%s: Maximum BD theshold exceeded. " + "Increase fragmentation level.\n", + priv->net_dev->name); + } + + if (txq->available <= 3 + + packet->info.d_struct.txb->nr_frags) { + IPW_DEBUG_TX("no room in tx_queue\n"); + break; + } + + list_del(element); + DEC_STAT(&priv->tx_pend_stat); + + tbd = &txq->drv[txq->next]; + + packet->index = txq->next; + + ipw_hdr = packet->info.d_struct.data; + hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb-> + fragments[0]->data; + + if (priv->ieee->iw_mode == IW_MODE_INFRA) { + /* To DS: Addr1 = BSSID, Addr2 = SA, + Addr3 = DA */ + memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); + memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN); + } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + /* not From/To DS: Addr1 = DA, Addr2 = SA, + Addr3 = BSSID */ + memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); + memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN); + } + + ipw_hdr->host_command_reg = SEND; + ipw_hdr->host_command_reg1 = 0; + + /* For now we only support host based encryption */ + ipw_hdr->needs_encryption = 0; + ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted; + if (packet->info.d_struct.txb->nr_frags > 1) + ipw_hdr->fragment_size = + packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN; + else + ipw_hdr->fragment_size = 0; + + tbd->host_addr = packet->info.d_struct.data_phys; + tbd->buf_length = sizeof(struct ipw2100_data_header); + tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags; + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; + txq->next++; + txq->next %= txq->entries; + + IPW_DEBUG_TX( + "data header tbd TX%d P=%08x L=%d\n", + packet->index, tbd->host_addr, + tbd->buf_length); +#ifdef CONFIG_IPW_DEBUG + if (packet->info.d_struct.txb->nr_frags > 1) + IPW_DEBUG_FRAG("fragment Tx: %d frames\n", + packet->info.d_struct.txb->nr_frags); +#endif + + for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) { + tbd = &txq->drv[txq->next]; + if (i == packet->info.d_struct.txb->nr_frags - 1) + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_INTERRUPT_ENABLE; + else + tbd->status.info.field = + IPW_BD_STATUS_TX_FRAME_802_3 | + IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; + + tbd->buf_length = packet->info.d_struct.txb-> + fragments[i]->len - IEEE80211_3ADDR_LEN; + + tbd->host_addr = pci_map_single( + priv->pci_dev, + packet->info.d_struct.txb->fragments[i]->data + + IEEE80211_3ADDR_LEN, + tbd->buf_length, + PCI_DMA_TODEVICE); + + IPW_DEBUG_TX( + "data frag tbd TX%d P=%08x L=%d\n", + txq->next, tbd->host_addr, tbd->buf_length); + + pci_dma_sync_single_for_device( + priv->pci_dev, tbd->host_addr, + tbd->buf_length, + PCI_DMA_TODEVICE); + + txq->next++; + txq->next %= txq->entries; + } + + txq->available -= 1 + packet->info.d_struct.txb->nr_frags; + SET_STAT(&priv->txq_stat, txq->available); + + list_add_tail(element, &priv->fw_pend_list); + INC_STAT(&priv->fw_pend_stat); + } + + if (txq->next != next) { + /* kick off the DMA by notifying firmware the + * write index has moved; make sure TBD stores are sync'd */ + write_register(priv->net_dev, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, + txq->next); + } + return; +} + +static void ipw2100_irq_tasklet(struct ipw2100_priv *priv) +{ + struct net_device *dev = priv->net_dev; + unsigned long flags; + u32 inta, tmp; + + spin_lock_irqsave(&priv->low_lock, flags); + ipw2100_disable_interrupts(priv); + + read_register(dev, IPW_REG_INTA, &inta); + + IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n", + (unsigned long)inta & IPW_INTERRUPT_MASK); + + priv->in_isr++; + priv->interrupts++; + + /* We do not loop and keep polling for more interrupts as this + * is frowned upon and doesn't play nicely with other potentially + * chained IRQs */ + IPW_DEBUG_ISR("INTA: 0x%08lX\n", + (unsigned long)inta & IPW_INTERRUPT_MASK); + + if (inta & IPW2100_INTA_FATAL_ERROR) { + printk(KERN_WARNING DRV_NAME + ": Fatal interrupt. Scheduling firmware restart.\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR); + + read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error); + IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n", + priv->net_dev->name, priv->fatal_error); + + read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp); + IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n", + priv->net_dev->name, tmp); + + /* Wake up any sleeping jobs */ + schedule_reset(priv); + } + + if (inta & IPW2100_INTA_PARITY_ERROR) { + printk(KERN_ERR DRV_NAME ": ***** PARITY ERROR INTERRUPT !!!! \n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_PARITY_ERROR); + } + + if (inta & IPW2100_INTA_RX_TRANSFER) { + IPW_DEBUG_ISR("RX interrupt\n"); + + priv->rx_interrupts++; + + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_RX_TRANSFER); + + __ipw2100_rx_process(priv); + __ipw2100_tx_complete(priv); + } + + if (inta & IPW2100_INTA_TX_TRANSFER) { + IPW_DEBUG_ISR("TX interrupt\n"); + + priv->tx_interrupts++; + + write_register(dev, IPW_REG_INTA, + IPW2100_INTA_TX_TRANSFER); + + __ipw2100_tx_complete(priv); + ipw2100_tx_send_commands(priv); + ipw2100_tx_send_data(priv); + } + + if (inta & IPW2100_INTA_TX_COMPLETE) { + IPW_DEBUG_ISR("TX complete\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_TX_COMPLETE); + + __ipw2100_tx_complete(priv); + } + + if (inta & IPW2100_INTA_EVENT_INTERRUPT) { + /* ipw2100_handle_event(dev); */ + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_EVENT_INTERRUPT); + } + + if (inta & IPW2100_INTA_FW_INIT_DONE) { + IPW_DEBUG_ISR("FW init done interrupt\n"); + priv->inta_other++; + + read_register(dev, IPW_REG_INTA, &tmp); + if (tmp & (IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR)) { + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_FATAL_ERROR | + IPW2100_INTA_PARITY_ERROR); + } + + write_register(dev, IPW_REG_INTA, + IPW2100_INTA_FW_INIT_DONE); + } + + if (inta & IPW2100_INTA_STATUS_CHANGE) { + IPW_DEBUG_ISR("Status change interrupt\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_STATUS_CHANGE); + } + + if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) { + IPW_DEBUG_ISR("slave host mode interrupt\n"); + priv->inta_other++; + write_register( + dev, IPW_REG_INTA, + IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE); + } + + priv->in_isr--; + ipw2100_enable_interrupts(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + + IPW_DEBUG_ISR("exit\n"); +} + + +static irqreturn_t ipw2100_interrupt(int irq, void *data, + struct pt_regs *regs) +{ + struct ipw2100_priv *priv = data; + u32 inta, inta_mask; + + if (!data) + return IRQ_NONE; + + spin_lock(&priv->low_lock); + + /* We check to see if we should be ignoring interrupts before + * we touch the hardware. During ucode load if we try and handle + * an interrupt we can cause keyboard problems as well as cause + * the ucode to fail to initialize */ + if (!(priv->status & STATUS_INT_ENABLED)) { + /* Shared IRQ */ + goto none; + } + + read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); + read_register(priv->net_dev, IPW_REG_INTA, &inta); + + if (inta == 0xFFFFFFFF) { + /* Hardware disappeared */ + printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); + goto none; + } + + inta &= IPW_INTERRUPT_MASK; + + if (!(inta & inta_mask)) { + /* Shared interrupt */ + goto none; + } + + /* We disable the hardware interrupt here just to prevent unneeded + * calls to be made. We disable this again within the actual + * work tasklet, so if another part of the code re-enables the + * interrupt, that is fine */ + ipw2100_disable_interrupts(priv); + + tasklet_schedule(&priv->irq_tasklet); + spin_unlock(&priv->low_lock); + + return IRQ_HANDLED; + none: + spin_unlock(&priv->low_lock); + return IRQ_NONE; +} + +static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct list_head *element; + struct ipw2100_tx_packet *packet; + unsigned long flags; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (!(priv->status & STATUS_ASSOCIATED)) { + IPW_DEBUG_INFO("Can not transmit when not connected.\n"); + priv->ieee->stats.tx_carrier_errors++; + netif_stop_queue(dev); + goto fail_unlock; + } + + if (list_empty(&priv->tx_free_list)) + goto fail_unlock; + + element = priv->tx_free_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + packet->info.d_struct.txb = txb; + + IPW_DEBUG_TX("Sending fragment (%d bytes):\n", + txb->fragments[0]->len); + printk_buf(IPW_DL_TX, txb->fragments[0]->data, + txb->fragments[0]->len); + + packet->jiffy_start = jiffies; + + list_del(element); + DEC_STAT(&priv->tx_free_stat); + + list_add_tail(element, &priv->tx_pend_list); + INC_STAT(&priv->tx_pend_stat); + + ipw2100_tx_send_data(priv); + + spin_unlock_irqrestore(&priv->low_lock, flags); + return 0; + + fail_unlock: + netif_stop_queue(dev); + spin_unlock_irqrestore(&priv->low_lock, flags); + return 1; +} + + +static int ipw2100_msg_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + void *v; + dma_addr_t p; + + priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc( + IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet), + GFP_KERNEL); + if (!priv->msg_buffers) { + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg " + "buffers.\n", priv->net_dev->name); + return -ENOMEM; + } + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { + v = pci_alloc_consistent( + priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + &p); + if (!v) { + printk(KERN_ERR DRV_NAME ": " + "%s: PCI alloc failed for msg " + "buffers.\n", + priv->net_dev->name); + err = -ENOMEM; + break; + } + + memset(v, 0, sizeof(struct ipw2100_cmd_header)); + + priv->msg_buffers[i].type = COMMAND; + priv->msg_buffers[i].info.c_struct.cmd = + (struct ipw2100_cmd_header*)v; + priv->msg_buffers[i].info.c_struct.cmd_phys = p; + } + + if (i == IPW_COMMAND_POOL_SIZE) + return 0; + + for (j = 0; j < i; j++) { + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + priv->msg_buffers[j].info.c_struct.cmd, + priv->msg_buffers[j].info.c_struct.cmd_phys); + } + + kfree(priv->msg_buffers); + priv->msg_buffers = NULL; + + return err; +} + +static int ipw2100_msg_initialize(struct ipw2100_priv *priv) +{ + int i; + + INIT_LIST_HEAD(&priv->msg_free_list); + INIT_LIST_HEAD(&priv->msg_pend_list); + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) + list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list); + SET_STAT(&priv->msg_free_stat, i); + + return 0; +} + +static void ipw2100_msg_free(struct ipw2100_priv *priv) +{ + int i; + + if (!priv->msg_buffers) + return; + + for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { + pci_free_consistent(priv->pci_dev, + sizeof(struct ipw2100_cmd_header), + priv->msg_buffers[i].info.c_struct.cmd, + priv->msg_buffers[i].info.c_struct.cmd_phys); + } + + kfree(priv->msg_buffers); + priv->msg_buffers = NULL; +} + +static ssize_t show_pci(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev); + char *out = buf; + int i, j; + u32 val; + + for (i = 0; i < 16; i++) { + out += sprintf(out, "[%08X] ", i * 16); + for (j = 0; j < 16; j += 4) { + pci_read_config_dword(pci_dev, i * 16 + j, &val); + out += sprintf(out, "%08X ", val); + } + out += sprintf(out, "\n"); + } + + return out - buf; +} +static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL); + +static ssize_t show_cfg(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->config); +} +static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); + +static ssize_t show_status(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_capability(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->capability); +} +static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL); + + +#define IPW2100_REG(x) { IPW_ ##x, #x } +static const struct { + u32 addr; + const char *name; +} hw_data[] = { + IPW2100_REG(REG_GP_CNTRL), + IPW2100_REG(REG_GPIO), + IPW2100_REG(REG_INTA), + IPW2100_REG(REG_INTA_MASK), + IPW2100_REG(REG_RESET_REG), +}; +#define IPW2100_NIC(x, s) { x, #x, s } +static const struct { + u32 addr; + const char *name; + size_t size; +} nic_data[] = { + IPW2100_NIC(IPW2100_CONTROL_REG, 2), + IPW2100_NIC(0x210014, 1), + IPW2100_NIC(0x210000, 1), +}; +#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d } +static const struct { + u8 index; + const char *name; + const char *desc; +} ord_data[] = { + IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_DIR_DATA, "successful Directed Tx's (MSDU)"), + IPW2100_ORD(STAT_TX_DIR_DATA1, "successful Directed Tx's (MSDU) @ 1MB"), + IPW2100_ORD(STAT_TX_DIR_DATA2, "successful Directed Tx's (MSDU) @ 2MB"), + IPW2100_ORD(STAT_TX_DIR_DATA5_5, "successful Directed Tx's (MSDU) @ 5_5MB"), + IPW2100_ORD(STAT_TX_DIR_DATA11, "successful Directed Tx's (MSDU) @ 11MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA1, "successful Non_Directed Tx's (MSDU) @ 1MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA2, "successful Non_Directed Tx's (MSDU) @ 2MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"), + IPW2100_ORD(STAT_TX_NODIR_DATA11, "successful Non_Directed Tx's (MSDU) @ 11MB"), + IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"), + IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"), + IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"), + IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"), + IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"), + IPW2100_ORD(STAT_TX_ASSN_RESP, "successful Association response Tx's"), + IPW2100_ORD(STAT_TX_REASSN, "successful Reassociation Tx's"), + IPW2100_ORD(STAT_TX_REASSN_RESP, "successful Reassociation response Tx's"), + IPW2100_ORD(STAT_TX_PROBE, "probes successfully transmitted"), + IPW2100_ORD(STAT_TX_PROBE_RESP, "probe responses successfully transmitted"), + IPW2100_ORD(STAT_TX_BEACON, "tx beacon"), + IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"), + IPW2100_ORD(STAT_TX_DISASSN, "successful Disassociation TX"), + IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"), + IPW2100_ORD(STAT_TX_DEAUTH, "successful Deauthentication TX"), + IPW2100_ORD(STAT_TX_TOTAL_BYTES, "Total successful Tx data bytes"), + IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"), + IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"), + IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"), + IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"), + IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"), + IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"), + IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"), + IPW2100_ORD(STAT_TX_DISASSN_FAIL, "times disassociation failed"), + IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"), + IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"), + IPW2100_ORD(STAT_RX_HOST, "packets passed to host"), + IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"), + IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"), + IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"), + IPW2100_ORD(STAT_RX_DIR_DATA5_5, "directed packets at 5.5MB"), + IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"), + IPW2100_ORD(STAT_RX_NODIR_DATA1, "nondirected packets at 1MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA2, "nondirected packets at 2MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA5_5, "nondirected packets at 5.5MB"), + IPW2100_ORD(STAT_RX_NODIR_DATA11, "nondirected packets at 11MB"), + IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"), + IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), + IPW2100_ORD(STAT_RX_CTS, "Rx CTS"), + IPW2100_ORD(STAT_RX_ACK, "Rx ACK"), + IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"), + IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"), + IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"), + IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"), + IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"), + IPW2100_ORD(STAT_RX_REASSN_RESP, "Reassociation response Rx's"), + IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"), + IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"), + IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"), + IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"), + IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"), + IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"), + IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"), + IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"), + IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"), + IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"), + IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"), + IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"), + IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"), + IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"), + IPW2100_ORD(STAT_RX_DUPLICATE2, "duplicate rx packets at 2MB"), + IPW2100_ORD(STAT_RX_DUPLICATE5_5, "duplicate rx packets at 5.5MB"), + IPW2100_ORD(STAT_RX_DUPLICATE11, "duplicate rx packets at 11MB"), + IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"), + IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"), + IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"), + IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"), + IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, "rx frames with invalid protocol"), + IPW2100_ORD(SYS_BOOT_TIME, "Boot time"), + IPW2100_ORD(STAT_RX_NO_BUFFER, "rx frames rejected due to no buffer"), + IPW2100_ORD(STAT_RX_MISSING_FRAG, "rx frames dropped due to missing fragment"), + IPW2100_ORD(STAT_RX_ORPHAN_FRAG, "rx frames dropped due to non-sequential fragment"), + IPW2100_ORD(STAT_RX_ORPHAN_FRAME, "rx frames dropped due to unmatched 1st frame"), + IPW2100_ORD(STAT_RX_FRAG_AGEOUT, "rx frames dropped due to uncompleted frame"), + IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"), + IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"), + IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"), + IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, "poll response timeouts"), + IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"), + IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"), + IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"), + IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"), + IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"), + IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"), + IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"), + IPW2100_ORD(ASSOCIATED_AP_PTR, "0 if not associated, else pointer to AP table entry"), + IPW2100_ORD(AVAILABLE_AP_CNT, "AP's decsribed in the AP table"), + IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"), + IPW2100_ORD(STAT_AP_ASSNS, "associations"), + IPW2100_ORD(STAT_ASSN_FAIL, "association failures"), + IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"), + IPW2100_ORD(STAT_FULL_SCANS, "full scans"), + IPW2100_ORD(CARD_DISABLED, "Card Disabled"), + IPW2100_ORD(STAT_ROAM_INHIBIT, "times roaming was inhibited due to activity"), + IPW2100_ORD(RSSI_AT_ASSN, "RSSI of associated AP at time of association"), + IPW2100_ORD(STAT_ASSN_CAUSE1, "reassociation: no probe response or TX on hop"), + IPW2100_ORD(STAT_ASSN_CAUSE2, "reassociation: poor tx/rx quality"), + IPW2100_ORD(STAT_ASSN_CAUSE3, "reassociation: tx/rx quality (excessive AP load"), + IPW2100_ORD(STAT_ASSN_CAUSE4, "reassociation: AP RSSI level"), + IPW2100_ORD(STAT_ASSN_CAUSE5, "reassociations due to load leveling"), + IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"), + IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"), + IPW2100_ORD(STATION_TABLE_CNT, "entries in association table"), + IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"), + IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"), + IPW2100_ORD(COUNTRY_CODE, "IEEE country code as recv'd from beacon"), + IPW2100_ORD(COUNTRY_CHANNELS, "channels suported by country"), + IPW2100_ORD(RESET_CNT, "adapter resets (warm)"), + IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"), + IPW2100_ORD(ANTENNA_DIVERSITY, "TRUE if antenna diversity is disabled"), + IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"), + IPW2100_ORD(OUR_FREQ, "current radio freq lower digits - channel ID"), + IPW2100_ORD(RTC_TIME, "current RTC time"), + IPW2100_ORD(PORT_TYPE, "operating mode"), + IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"), + IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"), + IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"), + IPW2100_ORD(BASIC_RATES, "basic tx rates"), + IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"), + IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"), + IPW2100_ORD(CAPABILITIES, "Management frame capability field"), + IPW2100_ORD(AUTH_TYPE, "Type of authentication"), + IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"), + IPW2100_ORD(RTS_THRESHOLD, "Min packet length for RTS handshaking"), + IPW2100_ORD(INT_MODE, "International mode"), + IPW2100_ORD(FRAGMENTATION_THRESHOLD, "protocol frag threshold"), + IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"), + IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, "EEPROM size in SRAM"), + IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"), + IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, "EEPROM IBSS 11b channel set"), + IPW2100_ORD(MAC_VERSION, "MAC Version"), + IPW2100_ORD(MAC_REVISION, "MAC Revision"), + IPW2100_ORD(RADIO_VERSION, "Radio Version"), + IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"), + IPW2100_ORD(UCODE_VERSION, "Ucode Version"), +}; + + +static ssize_t show_registers(struct device *d, struct device_attribute *attr, + char *buf) +{ + int i; + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char * out = buf; + u32 val = 0; + + out += sprintf(out, "%30s [Address ] : Hex\n", "Register"); + + for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) { + read_register(dev, hw_data[i].addr, &val); + out += sprintf(out, "%30s [%08X] : %08X\n", + hw_data[i].name, hw_data[i].addr, val); + } + + return out - buf; +} +static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); + + +static ssize_t show_hardware(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char * out = buf; + int i; + + out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry"); + + for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) { + u8 tmp8; + u16 tmp16; + u32 tmp32; + + switch (nic_data[i].size) { + case 1: + read_nic_byte(dev, nic_data[i].addr, &tmp8); + out += sprintf(out, "%30s [%08X] : %02X\n", + nic_data[i].name, nic_data[i].addr, + tmp8); + break; + case 2: + read_nic_word(dev, nic_data[i].addr, &tmp16); + out += sprintf(out, "%30s [%08X] : %04X\n", + nic_data[i].name, nic_data[i].addr, + tmp16); + break; + case 4: + read_nic_dword(dev, nic_data[i].addr, &tmp32); + out += sprintf(out, "%30s [%08X] : %08X\n", + nic_data[i].name, nic_data[i].addr, + tmp32); + break; + } + } + return out - buf; +} +static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL); + + +static ssize_t show_memory(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + static unsigned long loop = 0; + int len = 0; + u32 buffer[4]; + int i; + char line[81]; + + if (loop >= 0x30000) + loop = 0; + + /* sysfs provides us PAGE_SIZE buffer */ + while (len < PAGE_SIZE - 128 && loop < 0x30000) { + + if (priv->snapshot[0]) for (i = 0; i < 4; i++) + buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4); + else for (i = 0; i < 4; i++) + read_nic_dword(dev, loop + i * 4, &buffer[i]); + + if (priv->dump_raw) + len += sprintf(buf + len, + "%c%c%c%c" + "%c%c%c%c" + "%c%c%c%c" + "%c%c%c%c", + ((u8*)buffer)[0x0], + ((u8*)buffer)[0x1], + ((u8*)buffer)[0x2], + ((u8*)buffer)[0x3], + ((u8*)buffer)[0x4], + ((u8*)buffer)[0x5], + ((u8*)buffer)[0x6], + ((u8*)buffer)[0x7], + ((u8*)buffer)[0x8], + ((u8*)buffer)[0x9], + ((u8*)buffer)[0xa], + ((u8*)buffer)[0xb], + ((u8*)buffer)[0xc], + ((u8*)buffer)[0xd], + ((u8*)buffer)[0xe], + ((u8*)buffer)[0xf]); + else + len += sprintf(buf + len, "%s\n", + snprint_line(line, sizeof(line), + (u8*)buffer, 16, loop)); + loop += 16; + } + + return len; +} + +static ssize_t store_memory(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + const char *p = buf; + + if (count < 1) + return count; + + if (p[0] == '1' || + (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) { + IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n", + dev->name); + priv->dump_raw = 1; + + } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' && + tolower(p[1]) == 'f')) { + IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n", + dev->name); + priv->dump_raw = 0; + + } else if (tolower(p[0]) == 'r') { + IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", + dev->name); + ipw2100_snapshot_free(priv); + + } else + IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, " + "reset = clear memory snapshot\n", + dev->name); + + return count; +} +static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory); + + +static ssize_t show_ordinals(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + u32 val = 0; + int len = 0; + u32 val_len; + static int loop = 0; + + if (loop >= sizeof(ord_data) / sizeof(*ord_data)) + loop = 0; + + /* sysfs provides us PAGE_SIZE buffer */ + while (len < PAGE_SIZE - 128 && + loop < (sizeof(ord_data) / sizeof(*ord_data))) { + + val_len = sizeof(u32); + + if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val, + &val_len)) + len += sprintf(buf + len, "[0x%02X] = ERROR %s\n", + ord_data[loop].index, + ord_data[loop].desc); + else + len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n", + ord_data[loop].index, val, + ord_data[loop].desc); + loop++; + } + + return len; +} +static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL); + + +static ssize_t show_stats(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char * out = buf; + + out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n", + priv->interrupts, priv->tx_interrupts, + priv->rx_interrupts, priv->inta_other); + out += sprintf(out, "firmware resets: %d\n", priv->resets); + out += sprintf(out, "firmware hangs: %d\n", priv->hangs); +#ifdef CONFIG_IPW_DEBUG + out += sprintf(out, "packet mismatch image: %s\n", + priv->snapshot[0] ? "YES" : "NO"); +#endif + + return out - buf; +} +static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL); + + +static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode) +{ + int err; + + if (mode == priv->ieee->iw_mode) + return 0; + + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + + switch (mode) { + case IW_MODE_INFRA: + priv->net_dev->type = ARPHRD_ETHER; + break; + case IW_MODE_ADHOC: + priv->net_dev->type = ARPHRD_ETHER; + break; +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + priv->last_mode = priv->ieee->iw_mode; + priv->net_dev->type = ARPHRD_IEEE80211; + break; +#endif /* CONFIG_IPW2100_MONITOR */ + } + + priv->ieee->iw_mode = mode; + +#ifdef CONFIG_PM + /* Indicate ipw2100_download_firmware download firmware + * from disk instead of memory. */ + ipw2100_firmware.version = 0; +#endif + + printk(KERN_INFO "%s: Reseting on mode change.\n", + priv->net_dev->name); + priv->reset_backoff = 0; + schedule_reset(priv); + + return 0; +} + +static ssize_t show_internals(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + int len = 0; + +#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x) + + if (priv->status & STATUS_ASSOCIATED) + len += sprintf(buf + len, "connected: %lu\n", + get_seconds() - priv->connect_start); + else + len += sprintf(buf + len, "not connected\n"); + + DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p); + DUMP_VAR(status, 08lx); + DUMP_VAR(config, 08lx); + DUMP_VAR(capability, 08lx); + + len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc); + + DUMP_VAR(fatal_error, d); + DUMP_VAR(stop_hang_check, d); + DUMP_VAR(stop_rf_kill, d); + DUMP_VAR(messages_sent, d); + + DUMP_VAR(tx_pend_stat.value, d); + DUMP_VAR(tx_pend_stat.hi, d); + + DUMP_VAR(tx_free_stat.value, d); + DUMP_VAR(tx_free_stat.lo, d); + + DUMP_VAR(msg_free_stat.value, d); + DUMP_VAR(msg_free_stat.lo, d); + + DUMP_VAR(msg_pend_stat.value, d); + DUMP_VAR(msg_pend_stat.hi, d); + + DUMP_VAR(fw_pend_stat.value, d); + DUMP_VAR(fw_pend_stat.hi, d); + + DUMP_VAR(txq_stat.value, d); + DUMP_VAR(txq_stat.lo, d); + + DUMP_VAR(ieee->scans, d); + DUMP_VAR(reset_backoff, d); + + return len; +} +static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL); + + +static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char essid[IW_ESSID_MAX_SIZE + 1]; + u8 bssid[ETH_ALEN]; + u32 chan = 0; + char * out = buf; + int length; + int ret; + + memset(essid, 0, sizeof(essid)); + memset(bssid, 0, sizeof(bssid)); + + length = IW_ESSID_MAX_SIZE; + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + length = sizeof(bssid); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, + bssid, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + length = sizeof(u32); + ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length); + if (ret) + IPW_DEBUG_INFO("failed querying ordinals at line %d\n", + __LINE__); + + out += sprintf(out, "ESSID: %s\n", essid); + out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n", + bssid[0], bssid[1], bssid[2], + bssid[3], bssid[4], bssid[5]); + out += sprintf(out, "Channel: %d\n", chan); + + return out - buf; +} +static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL); + + +#ifdef CONFIG_IPW_DEBUG +static ssize_t show_debug_level(struct device_driver *d, char *buf) +{ + return sprintf(buf, "0x%08X\n", ipw2100_debug_level); +} + +static ssize_t store_debug_level(struct device_driver *d, const char *buf, + size_t count) +{ + char *p = (char *)buf; + u32 val; + + if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { + p++; + if (p[0] == 'x' || p[0] == 'X') + p++; + val = simple_strtoul(p, &p, 16); + } else + val = simple_strtoul(p, &p, 10); + if (p == buf) + IPW_DEBUG_INFO(DRV_NAME + ": %s is not in hex or decimal form.\n", buf); + else + ipw2100_debug_level = val; + + return strnlen(buf, count); +} +static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level, + store_debug_level); +#endif /* CONFIG_IPW_DEBUG */ + + +static ssize_t show_fatal_error(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + char *out = buf; + int i; + + if (priv->fatal_error) + out += sprintf(out, "0x%08X\n", + priv->fatal_error); + else + out += sprintf(out, "0\n"); + + for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) { + if (!priv->fatal_errors[(priv->fatal_index - i) % + IPW2100_ERROR_QUEUE]) + continue; + + out += sprintf(out, "%d. 0x%08X\n", i, + priv->fatal_errors[(priv->fatal_index - i) % + IPW2100_ERROR_QUEUE]); + } + + return out - buf; +} + +static ssize_t store_fatal_error(struct device *d, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + schedule_reset(priv); + return count; +} +static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error); + + +static ssize_t show_scan_age(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d\n", priv->ieee->scan_age); +} + +static ssize_t store_scan_age(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + struct net_device *dev = priv->net_dev; + char buffer[] = "00000000"; + unsigned long len = + (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1; + unsigned long val; + char *p = buffer; + + IPW_DEBUG_INFO("enter\n"); + + strncpy(buffer, buf, len); + buffer[len] = 0; + + if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { + p++; + if (p[0] == 'x' || p[0] == 'X') + p++; + val = simple_strtoul(p, &p, 16); + } else + val = simple_strtoul(p, &p, 10); + if (p == buffer) { + IPW_DEBUG_INFO("%s: user supplied invalid value.\n", + dev->name); + } else { + priv->ieee->scan_age = val; + IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age); + } + + IPW_DEBUG_INFO("exit\n"); + return len; +} +static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age); + + +static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, + char *buf) +{ + /* 0 - RF kill not enabled + 1 - SW based RF kill active (sysfs) + 2 - HW based RF kill active + 3 - Both HW and SW baed RF kill active */ + struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data; + int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | + (rf_kill_active(priv) ? 0x2 : 0x0); + return sprintf(buf, "%i\n", val); +} + +static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio) +{ + if ((disable_radio ? 1 : 0) == + (priv->status & STATUS_RF_KILL_SW ? 1 : 0)) + return 0 ; + + IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n", + disable_radio ? "OFF" : "ON"); + + down(&priv->action_sem); + + if (disable_radio) { + priv->status |= STATUS_RF_KILL_SW; + ipw2100_down(priv); + } else { + priv->status &= ~STATUS_RF_KILL_SW; + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by HW switch\n"); + /* Make sure the RF_KILL check timer is running */ + priv->stop_rf_kill = 0; + cancel_delayed_work(&priv->rf_kill); + queue_delayed_work(priv->workqueue, &priv->rf_kill, + HZ); + } else + schedule_reset(priv); + } + + up(&priv->action_sem); + return 1; +} + +static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw2100_priv *priv = dev_get_drvdata(d); + ipw_radio_kill_sw(priv, buf[0] == '1'); + return count; +} +static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill); + + +static struct attribute *ipw2100_sysfs_entries[] = { + &dev_attr_hardware.attr, + &dev_attr_registers.attr, + &dev_attr_ordinals.attr, + &dev_attr_pci.attr, + &dev_attr_stats.attr, + &dev_attr_internals.attr, + &dev_attr_bssinfo.attr, + &dev_attr_memory.attr, + &dev_attr_scan_age.attr, + &dev_attr_fatal_error.attr, + &dev_attr_rf_kill.attr, + &dev_attr_cfg.attr, + &dev_attr_status.attr, + &dev_attr_capability.attr, + NULL, +}; + +static struct attribute_group ipw2100_attribute_group = { + .attrs = ipw2100_sysfs_entries, +}; + + +static int status_queue_allocate(struct ipw2100_priv *priv, int entries) +{ + struct ipw2100_status_queue *q = &priv->status_queue; + + IPW_DEBUG_INFO("enter\n"); + + q->size = entries * sizeof(struct ipw2100_status); + q->drv = (struct ipw2100_status *)pci_alloc_consistent( + priv->pci_dev, q->size, &q->nic); + if (!q->drv) { + IPW_DEBUG_WARNING( + "Can not allocate status queue.\n"); + return -ENOMEM; + } + + memset(q->drv, 0, q->size); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static void status_queue_free(struct ipw2100_priv *priv) +{ + IPW_DEBUG_INFO("enter\n"); + + if (priv->status_queue.drv) { + pci_free_consistent( + priv->pci_dev, priv->status_queue.size, + priv->status_queue.drv, priv->status_queue.nic); + priv->status_queue.drv = NULL; + } + + IPW_DEBUG_INFO("exit\n"); +} + +static int bd_queue_allocate(struct ipw2100_priv *priv, + struct ipw2100_bd_queue *q, int entries) +{ + IPW_DEBUG_INFO("enter\n"); + + memset(q, 0, sizeof(struct ipw2100_bd_queue)); + + q->entries = entries; + q->size = entries * sizeof(struct ipw2100_bd); + q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic); + if (!q->drv) { + IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n"); + return -ENOMEM; + } + memset(q->drv, 0, q->size); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + +static void bd_queue_free(struct ipw2100_priv *priv, + struct ipw2100_bd_queue *q) +{ + IPW_DEBUG_INFO("enter\n"); + + if (!q) + return; + + if (q->drv) { + pci_free_consistent(priv->pci_dev, + q->size, q->drv, q->nic); + q->drv = NULL; + } + + IPW_DEBUG_INFO("exit\n"); +} + +static void bd_queue_initialize( + struct ipw2100_priv *priv, struct ipw2100_bd_queue * q, + u32 base, u32 size, u32 r, u32 w) +{ + IPW_DEBUG_INFO("enter\n"); + + IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, (u32)q->nic); + + write_register(priv->net_dev, base, q->nic); + write_register(priv->net_dev, size, q->entries); + write_register(priv->net_dev, r, q->oldest); + write_register(priv->net_dev, w, q->next); + + IPW_DEBUG_INFO("exit\n"); +} + +static void ipw2100_kill_workqueue(struct ipw2100_priv *priv) +{ + if (priv->workqueue) { + priv->stop_rf_kill = 1; + priv->stop_hang_check = 1; + cancel_delayed_work(&priv->reset_work); + cancel_delayed_work(&priv->security_work); + cancel_delayed_work(&priv->wx_event_work); + cancel_delayed_work(&priv->hang_check); + cancel_delayed_work(&priv->rf_kill); + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + } +} + +static int ipw2100_tx_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + void *v; + dma_addr_t p; + + IPW_DEBUG_INFO("enter\n"); + + err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n", + priv->net_dev->name); + return err; + } + + priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc( + TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet), + GFP_ATOMIC); + if (!priv->tx_buffers) { + printk(KERN_ERR DRV_NAME ": %s: alloc failed form tx buffers.\n", + priv->net_dev->name); + bd_queue_free(priv, &priv->tx_queue); + return -ENOMEM; + } + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + v = pci_alloc_consistent( + priv->pci_dev, sizeof(struct ipw2100_data_header), &p); + if (!v) { + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for tx " + "buffers.\n", priv->net_dev->name); + err = -ENOMEM; + break; + } + + priv->tx_buffers[i].type = DATA; + priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v; + priv->tx_buffers[i].info.d_struct.data_phys = p; + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + + if (i == TX_PENDED_QUEUE_LENGTH) + return 0; + + for (j = 0; j < i; j++) { + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_data_header), + priv->tx_buffers[j].info.d_struct.data, + priv->tx_buffers[j].info.d_struct.data_phys); + } + + kfree(priv->tx_buffers); + priv->tx_buffers = NULL; + + return err; +} + +static void ipw2100_tx_initialize(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + /* + * reinitialize packet info lists + */ + INIT_LIST_HEAD(&priv->fw_pend_list); + INIT_STAT(&priv->fw_pend_stat); + + /* + * reinitialize lists + */ + INIT_LIST_HEAD(&priv->tx_pend_list); + INIT_LIST_HEAD(&priv->tx_free_list); + INIT_STAT(&priv->tx_pend_stat); + INIT_STAT(&priv->tx_free_stat); + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + /* We simply drop any SKBs that have been queued for + * transmit */ + if (priv->tx_buffers[i].info.d_struct.txb) { + ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb); + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + + list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list); + } + + SET_STAT(&priv->tx_free_stat, i); + + priv->tx_queue.oldest = 0; + priv->tx_queue.available = priv->tx_queue.entries; + priv->tx_queue.next = 0; + INIT_STAT(&priv->txq_stat); + SET_STAT(&priv->txq_stat, priv->tx_queue.available); + + bd_queue_initialize(priv, &priv->tx_queue, + IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE, + IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE, + IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, + IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX); + + IPW_DEBUG_INFO("exit\n"); + +} + +static void ipw2100_tx_free(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + bd_queue_free(priv, &priv->tx_queue); + + if (!priv->tx_buffers) + return; + + for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { + if (priv->tx_buffers[i].info.d_struct.txb) { + ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb); + priv->tx_buffers[i].info.d_struct.txb = NULL; + } + if (priv->tx_buffers[i].info.d_struct.data) + pci_free_consistent( + priv->pci_dev, + sizeof(struct ipw2100_data_header), + priv->tx_buffers[i].info.d_struct.data, + priv->tx_buffers[i].info.d_struct.data_phys); + } + + kfree(priv->tx_buffers); + priv->tx_buffers = NULL; + + IPW_DEBUG_INFO("exit\n"); +} + + + +static int ipw2100_rx_allocate(struct ipw2100_priv *priv) +{ + int i, j, err = -EINVAL; + + IPW_DEBUG_INFO("enter\n"); + + err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_INFO("failed bd_queue_allocate\n"); + return err; + } + + err = status_queue_allocate(priv, RX_QUEUE_LENGTH); + if (err) { + IPW_DEBUG_INFO("failed status_queue_allocate\n"); + bd_queue_free(priv, &priv->rx_queue); + return err; + } + + /* + * allocate packets + */ + priv->rx_buffers = (struct ipw2100_rx_packet *) + kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet), + GFP_KERNEL); + if (!priv->rx_buffers) { + IPW_DEBUG_INFO("can't allocate rx packet buffer table\n"); + + bd_queue_free(priv, &priv->rx_queue); + + status_queue_free(priv); + + return -ENOMEM; + } + + for (i = 0; i < RX_QUEUE_LENGTH; i++) { + struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; + + err = ipw2100_alloc_skb(priv, packet); + if (unlikely(err)) { + err = -ENOMEM; + break; + } + + /* The BD holds the cache aligned address */ + priv->rx_queue.drv[i].host_addr = packet->dma_addr; + priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH; + priv->status_queue.drv[i].status_fields = 0; + } + + if (i == RX_QUEUE_LENGTH) + return 0; + + for (j = 0; j < i; j++) { + pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr, + sizeof(struct ipw2100_rx_packet), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->rx_buffers[j].skb); + } + + kfree(priv->rx_buffers); + priv->rx_buffers = NULL; + + bd_queue_free(priv, &priv->rx_queue); + + status_queue_free(priv); + + return err; +} + +static void ipw2100_rx_initialize(struct ipw2100_priv *priv) +{ + IPW_DEBUG_INFO("enter\n"); + + priv->rx_queue.oldest = 0; + priv->rx_queue.available = priv->rx_queue.entries - 1; + priv->rx_queue.next = priv->rx_queue.entries - 1; + + INIT_STAT(&priv->rxq_stat); + SET_STAT(&priv->rxq_stat, priv->rx_queue.available); + + bd_queue_initialize(priv, &priv->rx_queue, + IPW_MEM_HOST_SHARED_RX_BD_BASE, + IPW_MEM_HOST_SHARED_RX_BD_SIZE, + IPW_MEM_HOST_SHARED_RX_READ_INDEX, + IPW_MEM_HOST_SHARED_RX_WRITE_INDEX); + + /* set up the status queue */ + write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE, + priv->status_queue.nic); + + IPW_DEBUG_INFO("exit\n"); +} + +static void ipw2100_rx_free(struct ipw2100_priv *priv) +{ + int i; + + IPW_DEBUG_INFO("enter\n"); + + bd_queue_free(priv, &priv->rx_queue); + status_queue_free(priv); + + if (!priv->rx_buffers) + return; + + for (i = 0; i < RX_QUEUE_LENGTH; i++) { + if (priv->rx_buffers[i].rxp) { + pci_unmap_single(priv->pci_dev, + priv->rx_buffers[i].dma_addr, + sizeof(struct ipw2100_rx), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(priv->rx_buffers[i].skb); + } + } + + kfree(priv->rx_buffers); + priv->rx_buffers = NULL; + + IPW_DEBUG_INFO("exit\n"); +} + +static int ipw2100_read_mac_address(struct ipw2100_priv *priv) +{ + u32 length = ETH_ALEN; + u8 mac[ETH_ALEN]; + + int err; + + err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, + mac, &length); + if (err) { + IPW_DEBUG_INFO("MAC address read failed\n"); + return -EIO; + } + IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + + memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN); + + return 0; +} + +/******************************************************************** + * + * Firmware Commands + * + ********************************************************************/ + +static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode) +{ + struct host_command cmd = { + .host_command = ADAPTER_ADDRESS, + .host_command_sequence = 0, + .host_command_length = ETH_ALEN + }; + int err; + + IPW_DEBUG_HC("SET_MAC_ADDRESS\n"); + + IPW_DEBUG_INFO("enter\n"); + + if (priv->config & CFG_CUSTOM_MAC) { + memcpy(cmd.host_command_parameters, priv->mac_addr, + ETH_ALEN); + memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN); + } else + memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr, + ETH_ALEN); + + err = ipw2100_hw_send_command(priv, &cmd); + + IPW_DEBUG_INFO("exit\n"); + return err; +} + +static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type, + int batch_mode) +{ + struct host_command cmd = { + .host_command = PORT_TYPE, + .host_command_sequence = 0, + .host_command_length = sizeof(u32) + }; + int err; + + switch (port_type) { + case IW_MODE_INFRA: + cmd.host_command_parameters[0] = IPW_BSS; + break; + case IW_MODE_ADHOC: + cmd.host_command_parameters[0] = IPW_IBSS; + break; + } + + IPW_DEBUG_HC("PORT_TYPE: %s\n", + port_type == IPW_IBSS ? "Ad-Hoc" : "Managed"); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + + +static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, + int batch_mode) +{ + struct host_command cmd = { + .host_command = CHANNEL, + .host_command_sequence = 0, + .host_command_length = sizeof(u32) + }; + int err; + + cmd.host_command_parameters[0] = channel; + + IPW_DEBUG_HC("CHANNEL: %d\n", channel); + + /* If BSS then we don't support channel selection */ + if (priv->ieee->iw_mode == IW_MODE_INFRA) + return 0; + + if ((channel != 0) && + ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL))) + return -EINVAL; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) { + IPW_DEBUG_INFO("Failed to set channel to %d", + channel); + return err; + } + + if (channel) + priv->config |= CFG_STATIC_CHANNEL; + else + priv->config &= ~CFG_STATIC_CHANNEL; + + priv->channel = channel; + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + return 0; +} + +static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode) +{ + struct host_command cmd = { + .host_command = SYSTEM_CONFIG, + .host_command_sequence = 0, + .host_command_length = 12, + }; + u32 ibss_mask, len = sizeof(u32); + int err; + + /* Set system configuration */ + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) + cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START; + + cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK | + IPW_CFG_BSS_MASK | + IPW_CFG_802_1x_ENABLE; + + if (!(priv->config & CFG_LONG_PREAMBLE)) + cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO; + + err = ipw2100_get_ordinal(priv, + IPW_ORD_EEPROM_IBSS_11B_CHANNELS, + &ibss_mask, &len); + if (err) + ibss_mask = IPW_IBSS_11B_DEFAULT_MASK; + + cmd.host_command_parameters[1] = REG_CHANNEL_MASK; + cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask; + + /* 11b only */ + /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/ + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + +/* If IPv6 is configured in the kernel then we don't want to filter out all + * of the multicast packets as IPv6 needs some. */ +#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) + cmd.host_command = ADD_MULTICAST; + cmd.host_command_sequence = 0; + cmd.host_command_length = 0; + + ipw2100_hw_send_command(priv, &cmd); +#endif + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + return 0; +} + +static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, + int batch_mode) +{ + struct host_command cmd = { + .host_command = BASIC_TX_RATES, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = rate & TX_RATE_MASK; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + /* Set BASIC TX Rate first */ + ipw2100_hw_send_command(priv, &cmd); + + /* Set TX Rate */ + cmd.host_command = TX_RATES; + ipw2100_hw_send_command(priv, &cmd); + + /* Set MSDU TX Rate */ + cmd.host_command = MSDU_TX_RATES; + ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + + priv->tx_rates = rate; + + return 0; +} + +static int ipw2100_set_power_mode(struct ipw2100_priv *priv, + int power_level) +{ + struct host_command cmd = { + .host_command = POWER_MODE, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = power_level; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + if (power_level == IPW_POWER_MODE_CAM) + priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); + else + priv->power_mode = IPW_POWER_ENABLED | power_level; + +#ifdef CONFIG_IPW2100_TX_POWER + if (priv->port_type == IBSS && + priv->adhoc_power != DFTL_IBSS_TX_POWER) { + /* Set beacon interval */ + cmd.host_command = TX_POWER_INDEX; + cmd.host_command_parameters[0] = (u32)priv->adhoc_power; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + } +#endif + + return 0; +} + + +static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold) +{ + struct host_command cmd = { + .host_command = RTS_THRESHOLD, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + if (threshold & RTS_DISABLED) + cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD; + else + cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->rts_threshold = threshold; + + return 0; +} + +#if 0 +int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv, + u32 threshold, int batch_mode) +{ + struct host_command cmd = { + .host_command = FRAG_THRESHOLD, + .host_command_sequence = 0, + .host_command_length = 4, + .host_command_parameters[0] = 0, + }; + int err; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (threshold == 0) + threshold = DEFAULT_FRAG_THRESHOLD; + else { + threshold = max(threshold, MIN_FRAG_THRESHOLD); + threshold = min(threshold, MAX_FRAG_THRESHOLD); + } + + cmd.host_command_parameters[0] = threshold; + + IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold); + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + if (!err) + priv->frag_threshold = threshold; + + return err; +} +#endif + +static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry) +{ + struct host_command cmd = { + .host_command = SHORT_RETRY_LIMIT, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = retry; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->short_retry_limit = retry; + + return 0; +} + +static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry) +{ + struct host_command cmd = { + .host_command = LONG_RETRY_LIMIT, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = retry; + + err = ipw2100_hw_send_command(priv, &cmd); + if (err) + return err; + + priv->long_retry_limit = retry; + + return 0; +} + + +static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid, + int batch_mode) +{ + struct host_command cmd = { + .host_command = MANDATORY_BSSID, + .host_command_sequence = 0, + .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN + }; + int err; + +#ifdef CONFIG_IPW_DEBUG + if (bssid != NULL) + IPW_DEBUG_HC( + "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n", + bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], + bssid[5]); + else + IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n"); +#endif + /* if BSSID is empty then we disable mandatory bssid mode */ + if (bssid != NULL) + memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +#ifdef CONFIG_IEEE80211_WPA +static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv) +{ + struct host_command cmd = { + .host_command = DISASSOCIATION_BSSID, + .host_command_sequence = 0, + .host_command_length = ETH_ALEN + }; + int err; + int len; + + IPW_DEBUG_HC("DISASSOCIATION_BSSID\n"); + + len = ETH_ALEN; + /* The Firmware currently ignores the BSSID and just disassociates from + * the currently associated AP -- but in the off chance that a future + * firmware does use the BSSID provided here, we go ahead and try and + * set it to the currently associated AP's BSSID */ + memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN); + + err = ipw2100_hw_send_command(priv, &cmd); + + return err; +} +#endif + +/* + * Pseudo code for setting up wpa_frame: + */ +#if 0 +void x(struct ieee80211_assoc_frame *wpa_assoc) +{ + struct ipw2100_wpa_assoc_frame frame; + frame->fixed_ie_mask = IPW_WPA_CAPABILTIES | + IPW_WPA_LISTENINTERVAL | + IPW_WPA_AP_ADDRESS; + frame->capab_info = wpa_assoc->capab_info; + frame->lisen_interval = wpa_assoc->listent_interval; + memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN); + + /* UNKNOWN -- I'm not postivive about this part; don't have any WPA + * setup here to test it with. + * + * Walk the IEs in the wpa_assoc and figure out the total size of all + * that data. Stick that into frame->var_ie_len. Then memcpy() all of + * the IEs from wpa_frame into frame. + */ + frame->var_ie_len = calculate_ie_len(wpa_assoc); + memcpy(frame->var_ie, wpa_assoc->variable, frame->var_ie_len); + + ipw2100_set_wpa_ie(priv, &frame, 0); +} +#endif + + + + +static int ipw2100_set_wpa_ie(struct ipw2100_priv *, + struct ipw2100_wpa_assoc_frame *, int) +__attribute__ ((unused)); + +static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv, + struct ipw2100_wpa_assoc_frame *wpa_frame, + int batch_mode) +{ + struct host_command cmd = { + .host_command = SET_WPA_IE, + .host_command_sequence = 0, + .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame), + }; + int err; + + IPW_DEBUG_HC("SET_WPA_IE\n"); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + memcpy(cmd.host_command_parameters, wpa_frame, + sizeof(struct ipw2100_wpa_assoc_frame)); + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + if (ipw2100_enable_adapter(priv)) + err = -EIO; + } + + return err; +} + +struct security_info_params { + u32 allowed_ciphers; + u16 version; + u8 auth_mode; + u8 replay_counters_number; + u8 unicast_using_group; +} __attribute__ ((packed)); + +static int ipw2100_set_security_information(struct ipw2100_priv *priv, + int auth_mode, + int security_level, + int unicast_using_group, + int batch_mode) +{ + struct host_command cmd = { + .host_command = SET_SECURITY_INFORMATION, + .host_command_sequence = 0, + .host_command_length = sizeof(struct security_info_params) + }; + struct security_info_params *security = + (struct security_info_params *)&cmd.host_command_parameters; + int err; + memset(security, 0, sizeof(*security)); + + /* If shared key AP authentication is turned on, then we need to + * configure the firmware to try and use it. + * + * Actual data encryption/decryption is handled by the host. */ + security->auth_mode = auth_mode; + security->unicast_using_group = unicast_using_group; + + switch (security_level) { + default: + case SEC_LEVEL_0: + security->allowed_ciphers = IPW_NONE_CIPHER; + break; + case SEC_LEVEL_1: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER; + break; + case SEC_LEVEL_2: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_TKIP_CIPHER; + break; + case SEC_LEVEL_2_CKIP: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_CKIP_CIPHER; + break; + case SEC_LEVEL_3: + security->allowed_ciphers = IPW_WEP40_CIPHER | + IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER; + break; + } + + IPW_DEBUG_HC( + "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n", + security->auth_mode, security->allowed_ciphers, security_level); + + security->replay_counters_number = 0; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +static int ipw2100_set_tx_power(struct ipw2100_priv *priv, + u32 tx_power) +{ + struct host_command cmd = { + .host_command = TX_POWER_INDEX, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err = 0; + + cmd.host_command_parameters[0] = tx_power; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) + err = ipw2100_hw_send_command(priv, &cmd); + if (!err) + priv->tx_power = tx_power; + + return 0; +} + +static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv, + u32 interval, int batch_mode) +{ + struct host_command cmd = { + .host_command = BEACON_INTERVAL, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = interval; + + IPW_DEBUG_INFO("enter\n"); + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + err = ipw2100_enable_adapter(priv); + if (err) + return err; + } + } + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + +void ipw2100_queues_initialize(struct ipw2100_priv *priv) +{ + ipw2100_tx_initialize(priv); + ipw2100_rx_initialize(priv); + ipw2100_msg_initialize(priv); +} + +void ipw2100_queues_free(struct ipw2100_priv *priv) +{ + ipw2100_tx_free(priv); + ipw2100_rx_free(priv); + ipw2100_msg_free(priv); +} + +int ipw2100_queues_allocate(struct ipw2100_priv *priv) +{ + if (ipw2100_tx_allocate(priv) || + ipw2100_rx_allocate(priv) || + ipw2100_msg_allocate(priv)) + goto fail; + + return 0; + + fail: + ipw2100_tx_free(priv); + ipw2100_rx_free(priv); + ipw2100_msg_free(priv); + return -ENOMEM; +} + +#define IPW_PRIVACY_CAPABLE 0x0008 + +static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags, + int batch_mode) +{ + struct host_command cmd = { + .host_command = WEP_FLAGS, + .host_command_sequence = 0, + .host_command_length = 4 + }; + int err; + + cmd.host_command_parameters[0] = flags; + + IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +struct ipw2100_wep_key { + u8 idx; + u8 len; + u8 key[13]; +}; + +/* Macros to ease up priting WEP keys */ +#define WEP_FMT_64 "%02X%02X%02X%02X-%02X" +#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X" +#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4] +#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10] + + +/** + * Set a the wep key + * + * @priv: struct to work on + * @idx: index of the key we want to set + * @key: ptr to the key data to set + * @len: length of the buffer at @key + * @batch_mode: FIXME perform the operation in batch mode, not + * disabling the device. + * + * @returns 0 if OK, < 0 errno code on error. + * + * Fill out a command structure with the new wep key, length an + * index and send it down the wire. + */ +static int ipw2100_set_key(struct ipw2100_priv *priv, + int idx, char *key, int len, int batch_mode) +{ + int keylen = len ? (len <= 5 ? 5 : 13) : 0; + struct host_command cmd = { + .host_command = WEP_KEY_INFO, + .host_command_sequence = 0, + .host_command_length = sizeof(struct ipw2100_wep_key), + }; + struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters; + int err; + + IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n", + idx, keylen, len); + + /* NOTE: We don't check cached values in case the firmware was reset + * or some other problem is occuring. If the user is setting the key, + * then we push the change */ + + wep_key->idx = idx; + wep_key->len = keylen; + + if (keylen) { + memcpy(wep_key->key, key, len); + memset(wep_key->key + len, 0, keylen - len); + } + + /* Will be optimized out on debug not being configured in */ + if (keylen == 0) + IPW_DEBUG_WEP("%s: Clearing key %d\n", + priv->net_dev->name, wep_key->idx); + else if (keylen == 5) + IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n", + priv->net_dev->name, wep_key->idx, wep_key->len, + WEP_STR_64(wep_key->key)); + else + IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128 + "\n", + priv->net_dev->name, wep_key->idx, wep_key->len, + WEP_STR_128(wep_key->key)); + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) { + int err2 = ipw2100_enable_adapter(priv); + if (err == 0) + err = err2; + } + return err; +} + +static int ipw2100_set_key_index(struct ipw2100_priv *priv, + int idx, int batch_mode) +{ + struct host_command cmd = { + .host_command = WEP_KEY_INDEX, + .host_command_sequence = 0, + .host_command_length = 4, + .host_command_parameters = { idx }, + }; + int err; + + IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx); + + if (idx < 0 || idx > 3) + return -EINVAL; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) { + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", + priv->net_dev->name, err); + return err; + } + } + + /* send cmd to firmware */ + err = ipw2100_hw_send_command(priv, &cmd); + + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + + +static int ipw2100_configure_security(struct ipw2100_priv *priv, + int batch_mode) +{ + int i, err, auth_mode, sec_level, use_group; + + if (!(priv->status & STATUS_RUNNING)) + return 0; + + if (!batch_mode) { + err = ipw2100_disable_adapter(priv); + if (err) + return err; + } + + if (!priv->sec.enabled) { + err = ipw2100_set_security_information( + priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1); + } else { + auth_mode = IPW_AUTH_OPEN; + if ((priv->sec.flags & SEC_AUTH_MODE) && + (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY)) + auth_mode = IPW_AUTH_SHARED; + + sec_level = SEC_LEVEL_0; + if (priv->sec.flags & SEC_LEVEL) + sec_level = priv->sec.level; + + use_group = 0; + if (priv->sec.flags & SEC_UNICAST_GROUP) + use_group = priv->sec.unicast_uses_group; + + err = ipw2100_set_security_information( + priv, auth_mode, sec_level, use_group, 1); + } + + if (err) + goto exit; + + if (priv->sec.enabled) { + for (i = 0; i < 4; i++) { + if (!(priv->sec.flags & (1 << i))) { + memset(priv->sec.keys[i], 0, WEP_KEY_LEN); + priv->sec.key_sizes[i] = 0; + } else { + err = ipw2100_set_key(priv, i, + priv->sec.keys[i], + priv->sec.key_sizes[i], + 1); + if (err) + goto exit; + } + } + + ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1); + } + + /* Always enable privacy so the Host can filter WEP packets if + * encrypted data is sent up */ + err = ipw2100_set_wep_flags( + priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1); + if (err) + goto exit; + + priv->status &= ~STATUS_SECURITY_UPDATED; + + exit: + if (!batch_mode) + ipw2100_enable_adapter(priv); + + return err; +} + +static void ipw2100_security_work(struct ipw2100_priv *priv) +{ + /* If we happen to have reconnected before we get a chance to + * process this, then update the security settings--which causes + * a disassociation to occur */ + if (!(priv->status & STATUS_ASSOCIATED) && + priv->status & STATUS_SECURITY_UPDATED) + ipw2100_configure_security(priv, 0); +} + +static void shim__set_security(struct net_device *dev, + struct ieee80211_security *sec) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int i, force_update = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) + goto done; + + for (i = 0; i < 4; i++) { + if (sec->flags & (1 << i)) { + priv->sec.key_sizes[i] = sec->key_sizes[i]; + if (sec->key_sizes[i] == 0) + priv->sec.flags &= ~(1 << i); + else + memcpy(priv->sec.keys[i], sec->keys[i], + sec->key_sizes[i]); + priv->sec.flags |= (1 << i); + priv->status |= STATUS_SECURITY_UPDATED; + } + } + + if ((sec->flags & SEC_ACTIVE_KEY) && + priv->sec.active_key != sec->active_key) { + if (sec->active_key <= 3) { + priv->sec.active_key = sec->active_key; + priv->sec.flags |= SEC_ACTIVE_KEY; + } else + priv->sec.flags &= ~SEC_ACTIVE_KEY; + + priv->status |= STATUS_SECURITY_UPDATED; + } + + if ((sec->flags & SEC_AUTH_MODE) && + (priv->sec.auth_mode != sec->auth_mode)) { + priv->sec.auth_mode = sec->auth_mode; + priv->sec.flags |= SEC_AUTH_MODE; + priv->status |= STATUS_SECURITY_UPDATED; + } + + if (sec->flags & SEC_ENABLED && + priv->sec.enabled != sec->enabled) { + priv->sec.flags |= SEC_ENABLED; + priv->sec.enabled = sec->enabled; + priv->status |= STATUS_SECURITY_UPDATED; + force_update = 1; + } + + if (sec->flags & SEC_LEVEL && + priv->sec.level != sec->level) { + priv->sec.level = sec->level; + priv->sec.flags |= SEC_LEVEL; + priv->status |= STATUS_SECURITY_UPDATED; + } + + IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n", + priv->sec.flags & (1<<8) ? '1' : '0', + priv->sec.flags & (1<<7) ? '1' : '0', + priv->sec.flags & (1<<6) ? '1' : '0', + priv->sec.flags & (1<<5) ? '1' : '0', + priv->sec.flags & (1<<4) ? '1' : '0', + priv->sec.flags & (1<<3) ? '1' : '0', + priv->sec.flags & (1<<2) ? '1' : '0', + priv->sec.flags & (1<<1) ? '1' : '0', + priv->sec.flags & (1<<0) ? '1' : '0'); + +/* As a temporary work around to enable WPA until we figure out why + * wpa_supplicant toggles the security capability of the driver, which + * forces a disassocation with force_update... + * + * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ + if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) + ipw2100_configure_security(priv, 0); +done: + up(&priv->action_sem); +} + +static int ipw2100_adapter_setup(struct ipw2100_priv *priv) +{ + int err; + int batch_mode = 1; + u8 *bssid; + + IPW_DEBUG_INFO("enter\n"); + + err = ipw2100_disable_adapter(priv); + if (err) + return err; +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + err = ipw2100_set_channel(priv, priv->channel, batch_mode); + if (err) + return err; + + IPW_DEBUG_INFO("exit\n"); + + return 0; + } +#endif /* CONFIG_IPW2100_MONITOR */ + + err = ipw2100_read_mac_address(priv); + if (err) + return -EIO; + + err = ipw2100_set_mac_address(priv, batch_mode); + if (err) + return err; + + err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode); + if (err) + return err; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + err = ipw2100_set_channel(priv, priv->channel, batch_mode); + if (err) + return err; + } + + err = ipw2100_system_config(priv, batch_mode); + if (err) + return err; + + err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode); + if (err) + return err; + + /* Default to power mode OFF */ + err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); + if (err) + return err; + + err = ipw2100_set_rts_threshold(priv, priv->rts_threshold); + if (err) + return err; + + if (priv->config & CFG_STATIC_BSSID) + bssid = priv->bssid; + else + bssid = NULL; + err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode); + if (err) + return err; + + if (priv->config & CFG_STATIC_ESSID) + err = ipw2100_set_essid(priv, priv->essid, priv->essid_len, + batch_mode); + else + err = ipw2100_set_essid(priv, NULL, 0, batch_mode); + if (err) + return err; + + err = ipw2100_configure_security(priv, batch_mode); + if (err) + return err; + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + err = ipw2100_set_ibss_beacon_interval( + priv, priv->beacon_interval, batch_mode); + if (err) + return err; + + err = ipw2100_set_tx_power(priv, priv->tx_power); + if (err) + return err; + } + + /* + err = ipw2100_set_fragmentation_threshold( + priv, priv->frag_threshold, batch_mode); + if (err) + return err; + */ + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + +/************************************************************************* + * + * EXTERNALLY CALLED METHODS + * + *************************************************************************/ + +/* This method is called by the network layer -- not to be confused with + * ipw2100_set_mac_address() declared above called by this driver (and this + * method as well) to talk to the firmware */ +static int ipw2100_set_address(struct net_device *dev, void *p) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct sockaddr *addr = p; + int err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + down(&priv->action_sem); + + priv->config |= CFG_CUSTOM_MAC; + memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); + + err = ipw2100_set_mac_address(priv, 0); + if (err) + goto done; + + priv->reset_backoff = 0; + up(&priv->action_sem); + ipw2100_reset_adapter(priv); + return 0; + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_open(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + unsigned long flags; + IPW_DEBUG_INFO("dev->open\n"); + + spin_lock_irqsave(&priv->low_lock, flags); + if (priv->status & STATUS_ASSOCIATED) { + netif_carrier_on(dev); + netif_start_queue(dev); + } + spin_unlock_irqrestore(&priv->low_lock, flags); + + return 0; +} + +static int ipw2100_close(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + unsigned long flags; + struct list_head *element; + struct ipw2100_tx_packet *packet; + + IPW_DEBUG_INFO("enter\n"); + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->status & STATUS_ASSOCIATED) + netif_carrier_off(dev); + netif_stop_queue(dev); + + /* Flush the TX queue ... */ + while (!list_empty(&priv->tx_pend_list)) { + element = priv->tx_pend_list.next; + packet = list_entry(element, struct ipw2100_tx_packet, list); + + list_del(element); + DEC_STAT(&priv->tx_pend_stat); + + ieee80211_txb_free(packet->info.d_struct.txb); + packet->info.d_struct.txb = NULL; + + list_add_tail(element, &priv->tx_free_list); + INC_STAT(&priv->tx_free_stat); + } + spin_unlock_irqrestore(&priv->low_lock, flags); + + IPW_DEBUG_INFO("exit\n"); + + return 0; +} + + + +/* + * TODO: Fix this function... its just wrong + */ +static void ipw2100_tx_timeout(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + + priv->ieee->stats.tx_errors++; + +#ifdef CONFIG_IPW2100_MONITOR + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + return; +#endif + + IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n", + dev->name); + schedule_reset(priv); +} + + +/* + * TODO: reimplement it so that it reads statistics + * from the adapter using ordinal tables + * instead of/in addition to collecting them + * in the driver + */ +static struct net_device_stats *ipw2100_stats(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + + return &priv->ieee->stats; +} + +/* Support for wpa_supplicant. Will be replaced with WEXT once + * they get WPA support. */ +#ifdef CONFIG_IEEE80211_WPA + +/* following definitions must match definitions in driver_ipw2100.c */ + +#define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 + +#define IPW2100_CMD_SET_WPA_PARAM 1 +#define IPW2100_CMD_SET_WPA_IE 2 +#define IPW2100_CMD_SET_ENCRYPTION 3 +#define IPW2100_CMD_MLME 4 + +#define IPW2100_PARAM_WPA_ENABLED 1 +#define IPW2100_PARAM_TKIP_COUNTERMEASURES 2 +#define IPW2100_PARAM_DROP_UNENCRYPTED 3 +#define IPW2100_PARAM_PRIVACY_INVOKED 4 +#define IPW2100_PARAM_AUTH_ALGS 5 +#define IPW2100_PARAM_IEEE_802_1X 6 + +#define IPW2100_MLME_STA_DEAUTH 1 +#define IPW2100_MLME_STA_DISASSOC 2 + +#define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2 +#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3 +#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4 +#define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5 +#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6 +#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7 + +#define IPW2100_CRYPT_ALG_NAME_LEN 16 + +struct ipw2100_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u8 name; + u32 value; + } wpa_param; + struct { + u32 len; + u8 *data; + } wpa_ie; + struct{ + int command; + int reason_code; + } mlme; + struct { + u8 alg[IPW2100_CRYPT_ALG_NAME_LEN]; + u8 set_tx; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + + } u; +}; + +/* end of driver_ipw2100.c code */ + +static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){ + + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_security sec = { + .flags = SEC_LEVEL | SEC_ENABLED, + }; + int ret = 0; + + ieee->wpa_enabled = value; + + if (value){ + sec.level = SEC_LEVEL_3; + sec.enabled = 1; + } else { + sec.level = SEC_LEVEL_0; + sec.enabled = 0; + } + + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + else + ret = -EOPNOTSUPP; + + return ret; +} + +#define AUTH_ALG_OPEN_SYSTEM 0x1 +#define AUTH_ALG_SHARED_KEY 0x2 + +static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){ + + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_security sec = { + .flags = SEC_AUTH_MODE, + }; + int ret = 0; + + if (value & AUTH_ALG_SHARED_KEY){ + sec.auth_mode = WLAN_AUTH_SHARED_KEY; + ieee->open_wep = 0; + } else { + sec.auth_mode = WLAN_AUTH_OPEN; + ieee->open_wep = 1; + } + + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + else + ret = -EOPNOTSUPP; + + return ret; +} + + +static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int ret=0; + + switch(name){ + case IPW2100_PARAM_WPA_ENABLED: + ret = ipw2100_wpa_enable(priv, value); + break; + + case IPW2100_PARAM_TKIP_COUNTERMEASURES: + priv->ieee->tkip_countermeasures=value; + break; + + case IPW2100_PARAM_DROP_UNENCRYPTED: + priv->ieee->drop_unencrypted=value; + break; + + case IPW2100_PARAM_PRIVACY_INVOKED: + priv->ieee->privacy_invoked=value; + break; + + case IPW2100_PARAM_AUTH_ALGS: + ret = ipw2100_wpa_set_auth_algs(priv, value); + break; + + case IPW2100_PARAM_IEEE_802_1X: + priv->ieee->ieee802_1x=value; + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n", + dev->name, name); + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int ret=0; + + switch(command){ + case IPW2100_MLME_STA_DEAUTH: + // silently ignore + break; + + case IPW2100_MLME_STA_DISASSOC: + ipw2100_disassociate_bssid(priv); + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n", + dev->name, command); + ret = -EOPNOTSUPP; + } + + return ret; +} + + +void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv, + char *wpa_ie, int wpa_ie_len){ + + struct ipw2100_wpa_assoc_frame frame; + + frame.fixed_ie_mask = 0; + + /* copy WPA IE */ + memcpy(frame.var_ie, wpa_ie, wpa_ie_len); + frame.var_ie_len = wpa_ie_len; + + /* make sure WPA is enabled */ + ipw2100_wpa_enable(priv, 1); + ipw2100_set_wpa_ie(priv, &frame, 0); +} + + +static int ipw2100_wpa_set_wpa_ie(struct net_device *dev, + struct ipw2100_param *param, int plen){ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee; + u8 *buf; + + if (! ieee->wpa_enabled) + return -EOPNOTSUPP; + + if (param->u.wpa_ie.len > MAX_WPA_IE_LEN || + (param->u.wpa_ie.len && + param->u.wpa_ie.data==NULL)) + return -EINVAL; + + if (param->u.wpa_ie.len){ + buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len); + + kfree(ieee->wpa_ie); + ieee->wpa_ie = buf; + ieee->wpa_ie_len = param->u.wpa_ie.len; + + } else { + kfree(ieee->wpa_ie); + ieee->wpa_ie = NULL; + ieee->wpa_ie_len = 0; + } + + ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len); + + return 0; +} + +/* implementation borrowed from hostap driver */ + +static int ipw2100_wpa_set_encryption(struct net_device *dev, + struct ipw2100_param *param, int param_len){ + + int ret = 0; + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee; + struct ieee80211_crypto_ops *ops; + struct ieee80211_crypt_data **crypt; + + struct ieee80211_security sec = { + .flags = 0, + }; + + param->u.crypt.err = 0; + param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0'; + + if (param_len != + (int) ((char *) param->u.crypt.key - (char *) param) + + param->u.crypt.key_len){ + IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len); + return -EINVAL; + } + if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && + param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && + param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) { + if (param->u.crypt.idx >= WEP_KEYS) + return -EINVAL; + crypt = &ieee->crypt[param->u.crypt.idx]; + } else { + return -EINVAL; + } + + if (strcmp(param->u.crypt.alg, "none") == 0) { + if (crypt){ + sec.enabled = 0; + sec.level = SEC_LEVEL_0; + sec.flags |= SEC_ENABLED | SEC_LEVEL; + ieee80211_crypt_delayed_deinit(ieee, crypt); + } + goto done; + } + sec.enabled = 1; + sec.flags |= SEC_ENABLED; + + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { + request_module("ieee80211_crypt_wep"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { + request_module("ieee80211_crypt_tkip"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { + request_module("ieee80211_crypt_ccmp"); + ops = ieee80211_get_crypto_ops(param->u.crypt.alg); + } + if (ops == NULL) { + IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n", + dev->name, param->u.crypt.alg); + param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG; + ret = -EINVAL; + goto done; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct ieee80211_crypt_data *new_crypt; + + ieee80211_crypt_delayed_deinit(ieee, crypt); + + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ops; + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); + + if (new_crypt->priv == NULL) { + kfree(new_crypt); + param->u.crypt.err = + IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED; + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(param->u.crypt.key, + param->u.crypt.key_len, param->u.crypt.seq, + (*crypt)->priv) < 0) { + IPW_DEBUG_INFO("%s: key setting failed\n", + dev->name); + param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + + if (param->u.crypt.set_tx){ + ieee->tx_keyidx = param->u.crypt.idx; + sec.active_key = param->u.crypt.idx; + sec.flags |= SEC_ACTIVE_KEY; + } + + if (ops->name != NULL){ + + if (strcmp(ops->name, "WEP") == 0) { + memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len); + sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len; + sec.flags |= (1 << param->u.crypt.idx); + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_1; + } else if (strcmp(ops->name, "TKIP") == 0) { + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_2; + } else if (strcmp(ops->name, "CCMP") == 0) { + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_3; + } + } + done: + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + + /* Do not reset port if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. If your hardware requires a reset after WEP + * configuration (for example... Prism2), implement the reset_port in + * the callbacks structures used to initialize the 802.11 stack. */ + if (ieee->reset_on_keychange && + ieee->iw_mode != IW_MODE_INFRA && + ieee->reset_port && + ieee->reset_port(dev)) { + IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name); + param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED; + return -EINVAL; + } + + return ret; +} + + +static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){ + + struct ipw2100_param *param; + int ret=0; + + IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length); + + if (p->length < sizeof(struct ipw2100_param) || !p->pointer) + return -EINVAL; + + param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)){ + kfree(param); + return -EFAULT; + } + + switch (param->cmd){ + + case IPW2100_CMD_SET_WPA_PARAM: + ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name, + param->u.wpa_param.value); + break; + + case IPW2100_CMD_SET_WPA_IE: + ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length); + break; + + case IPW2100_CMD_SET_ENCRYPTION: + ret = ipw2100_wpa_set_encryption(dev, param, p->length); + break; + + case IPW2100_CMD_MLME: + ret = ipw2100_wpa_mlme(dev, param->u.mlme.command, + param->u.mlme.reason_code); + break; + + default: + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA supplicant request: %d\n", + dev->name, param->cmd); + ret = -EOPNOTSUPP; + + } + + if (ret == 0 && copy_to_user(p->pointer, param, p->length)) + ret = -EFAULT; + + kfree(param); + return ret; +} +#endif /* CONFIG_IEEE80211_WPA */ + +static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ +#ifdef CONFIG_IEEE80211_WPA + struct iwreq *wrq = (struct iwreq *) rq; + int ret=-1; + switch (cmd){ + case IPW2100_IOCTL_WPA_SUPPLICANT: + ret = ipw2100_wpa_supplicant(dev, &wrq->u.data); + return ret; + + default: + return -EOPNOTSUPP; + } + +#endif /* CONFIG_IEEE80211_WPA */ + + return -EOPNOTSUPP; +} + + +static void ipw_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + char fw_ver[64], ucode_ver[64]; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + + ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver)); + ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver)); + + snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", + fw_ver, priv->eeprom_version, ucode_ver); + + strcpy(info->bus_info, pci_name(priv->pci_dev)); +} + +static u32 ipw2100_ethtool_get_link(struct net_device *dev) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + return (priv->status & STATUS_ASSOCIATED) ? 1 : 0; +} + + +static struct ethtool_ops ipw2100_ethtool_ops = { + .get_link = ipw2100_ethtool_get_link, + .get_drvinfo = ipw_ethtool_get_drvinfo, +}; + +static void ipw2100_hang_check(void *adapter) +{ + struct ipw2100_priv *priv = adapter; + unsigned long flags; + u32 rtc = 0xa5a5a5a5; + u32 len = sizeof(rtc); + int restart = 0; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (priv->fatal_error != 0) { + /* If fatal_error is set then we need to restart */ + IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n", + priv->net_dev->name); + + restart = 1; + } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) || + (rtc == priv->last_rtc)) { + /* Check if firmware is hung */ + IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n", + priv->net_dev->name); + + restart = 1; + } + + if (restart) { + /* Kill timer */ + priv->stop_hang_check = 1; + priv->hangs++; + + /* Restart the NIC */ + schedule_reset(priv); + } + + priv->last_rtc = rtc; + + if (!priv->stop_hang_check) + queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2); + + spin_unlock_irqrestore(&priv->low_lock, flags); +} + + +static void ipw2100_rf_kill(void *adapter) +{ + struct ipw2100_priv *priv = adapter; + unsigned long flags; + + spin_lock_irqsave(&priv->low_lock, flags); + + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n"); + if (!priv->stop_rf_kill) + queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ); + goto exit_unlock; + } + + /* RF Kill is now disabled, so bring the device back up */ + + if (!(priv->status & STATUS_RF_KILL_MASK)) { + IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " + "device\n"); + schedule_reset(priv); + } else + IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " + "enabled\n"); + + exit_unlock: + spin_unlock_irqrestore(&priv->low_lock, flags); +} + +static void ipw2100_irq_tasklet(struct ipw2100_priv *priv); + +/* Look into using netdev destructor to shutdown ieee80211? */ + +static struct net_device *ipw2100_alloc_device( + struct pci_dev *pci_dev, + void __iomem *base_addr, + unsigned long mem_start, + unsigned long mem_len) +{ + struct ipw2100_priv *priv; + struct net_device *dev; + + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); + if (!dev) + return NULL; + priv = ieee80211_priv(dev); + priv->ieee = netdev_priv(dev); + priv->pci_dev = pci_dev; + priv->net_dev = dev; + + priv->ieee->hard_start_xmit = ipw2100_tx; + priv->ieee->set_security = shim__set_security; + + dev->open = ipw2100_open; + dev->stop = ipw2100_close; + dev->init = ipw2100_net_init; + dev->do_ioctl = ipw2100_ioctl; + dev->get_stats = ipw2100_stats; + dev->ethtool_ops = &ipw2100_ethtool_ops; + dev->tx_timeout = ipw2100_tx_timeout; + dev->wireless_handlers = &ipw2100_wx_handler_def; + dev->get_wireless_stats = ipw2100_wx_wireless_stats; + dev->set_mac_address = ipw2100_set_address; + dev->watchdog_timeo = 3*HZ; + dev->irq = 0; + + dev->base_addr = (unsigned long)base_addr; + dev->mem_start = mem_start; + dev->mem_end = dev->mem_start + mem_len - 1; + + /* NOTE: We don't use the wireless_handlers hook + * in dev as the system will start throwing WX requests + * to us before we're actually initialized and it just + * ends up causing problems. So, we just handle + * the WX extensions through the ipw2100_ioctl interface */ + + + /* memset() puts everything to 0, so we only have explicitely set + * those values that need to be something else */ + + /* If power management is turned on, default to AUTO mode */ + priv->power_mode = IPW_POWER_AUTO; + + + +#ifdef CONFIG_IEEE80211_WPA + priv->ieee->wpa_enabled = 0; + priv->ieee->tkip_countermeasures = 0; + priv->ieee->drop_unencrypted = 0; + priv->ieee->privacy_invoked = 0; + priv->ieee->ieee802_1x = 1; +#endif /* CONFIG_IEEE80211_WPA */ + + /* Set module parameters */ + switch (mode) { + case 1: + priv->ieee->iw_mode = IW_MODE_ADHOC; + break; +#ifdef CONFIG_IPW2100_MONITOR + case 2: + priv->ieee->iw_mode = IW_MODE_MONITOR; + break; +#endif + default: + case 0: + priv->ieee->iw_mode = IW_MODE_INFRA; + break; + } + + if (disable == 1) + priv->status |= STATUS_RF_KILL_SW; + + if (channel != 0 && + ((channel >= REG_MIN_CHANNEL) && + (channel <= REG_MAX_CHANNEL))) { + priv->config |= CFG_STATIC_CHANNEL; + priv->channel = channel; + } + + if (associate) + priv->config |= CFG_ASSOCIATE; + + priv->beacon_interval = DEFAULT_BEACON_INTERVAL; + priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT; + priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT; + priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED; + priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED; + priv->tx_power = IPW_TX_POWER_DEFAULT; + priv->tx_rates = DEFAULT_TX_RATES; + + strcpy(priv->nick, "ipw2100"); + + spin_lock_init(&priv->low_lock); + sema_init(&priv->action_sem, 1); + sema_init(&priv->adapter_sem, 1); + + init_waitqueue_head(&priv->wait_command_queue); + + netif_carrier_off(dev); + + INIT_LIST_HEAD(&priv->msg_free_list); + INIT_LIST_HEAD(&priv->msg_pend_list); + INIT_STAT(&priv->msg_free_stat); + INIT_STAT(&priv->msg_pend_stat); + + INIT_LIST_HEAD(&priv->tx_free_list); + INIT_LIST_HEAD(&priv->tx_pend_list); + INIT_STAT(&priv->tx_free_stat); + INIT_STAT(&priv->tx_pend_stat); + + INIT_LIST_HEAD(&priv->fw_pend_list); + INIT_STAT(&priv->fw_pend_stat); + + +#ifdef CONFIG_SOFTWARE_SUSPEND2 + priv->workqueue = create_workqueue(DRV_NAME, 0); +#else + priv->workqueue = create_workqueue(DRV_NAME); +#endif + INIT_WORK(&priv->reset_work, + (void (*)(void *))ipw2100_reset_adapter, priv); + INIT_WORK(&priv->security_work, + (void (*)(void *))ipw2100_security_work, priv); + INIT_WORK(&priv->wx_event_work, + (void (*)(void *))ipw2100_wx_event_work, priv); + INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv); + INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv); + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + ipw2100_irq_tasklet, (unsigned long)priv); + + /* NOTE: We do not start the deferred work for status checks yet */ + priv->stop_rf_kill = 1; + priv->stop_hang_check = 1; + + return dev; +} + +static int ipw2100_pci_init_one(struct pci_dev *pci_dev, + const struct pci_device_id *ent) +{ + unsigned long mem_start, mem_len, mem_flags; + void __iomem *base_addr = NULL; + struct net_device *dev = NULL; + struct ipw2100_priv *priv = NULL; + int err = 0; + int registered = 0; + u32 val; + + IPW_DEBUG_INFO("enter\n"); + + mem_start = pci_resource_start(pci_dev, 0); + mem_len = pci_resource_len(pci_dev, 0); + mem_flags = pci_resource_flags(pci_dev, 0); + + if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) { + IPW_DEBUG_INFO("weird - resource type is not memory\n"); + err = -ENODEV; + goto fail; + } + + base_addr = ioremap_nocache(mem_start, mem_len); + if (!base_addr) { + printk(KERN_WARNING DRV_NAME + "Error calling ioremap_nocache.\n"); + err = -EIO; + goto fail; + } + + /* allocate and initialize our net_device */ + dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len); + if (!dev) { + printk(KERN_WARNING DRV_NAME + "Error calling ipw2100_alloc_device.\n"); + err = -ENOMEM; + goto fail; + } + + /* set up PCI mappings for device */ + err = pci_enable_device(pci_dev); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_enable_device.\n"); + return err; + } + + priv = ieee80211_priv(dev); + + pci_set_master(pci_dev); + pci_set_drvdata(pci_dev, priv); + + err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_set_dma_mask.\n"); + pci_disable_device(pci_dev); + return err; + } + + err = pci_request_regions(pci_dev, DRV_NAME); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling pci_request_regions.\n"); + pci_disable_device(pci_dev); + return err; + } + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(pci_dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); + + pci_set_power_state(pci_dev, PCI_D0); + + if (!ipw2100_hw_is_adapter_in_system(dev)) { + printk(KERN_WARNING DRV_NAME + "Device not found via register read.\n"); + err = -ENODEV; + goto fail; + } + + SET_NETDEV_DEV(dev, &pci_dev->dev); + + /* Force interrupts to be shut off on the device */ + priv->status |= STATUS_INT_ENABLED; + ipw2100_disable_interrupts(priv); + + /* Allocate and initialize the Tx/Rx queues and lists */ + if (ipw2100_queues_allocate(priv)) { + printk(KERN_WARNING DRV_NAME + "Error calilng ipw2100_queues_allocate.\n"); + err = -ENOMEM; + goto fail; + } + ipw2100_queues_initialize(priv); + + err = request_irq(pci_dev->irq, + ipw2100_interrupt, SA_SHIRQ, + dev->name, priv); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling request_irq: %d.\n", + pci_dev->irq); + goto fail; + } + dev->irq = pci_dev->irq; + + IPW_DEBUG_INFO("Attempting to register device...\n"); + + SET_MODULE_OWNER(dev); + + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2100 Network Connection\n"); + + /* Bring up the interface. Pre 0.46, after we registered the + * network device we would call ipw2100_up. This introduced a race + * condition with newer hotplug configurations (network was coming + * up and making calls before the device was initialized). + * + * If we called ipw2100_up before we registered the device, then the + * device name wasn't registered. So, we instead use the net_dev->init + * member to call a function that then just turns and calls ipw2100_up. + * net_dev->init is called after name allocation but before the + * notifier chain is called */ + down(&priv->action_sem); + err = register_netdev(dev); + if (err) { + printk(KERN_WARNING DRV_NAME + "Error calling register_netdev.\n"); + goto fail_unlock; + } + registered = 1; + + IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); + + /* perform this after register_netdev so that dev->name is set */ + sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + netif_carrier_off(dev); + + /* If the RF Kill switch is disabled, go ahead and complete the + * startup sequence */ + if (!(priv->status & STATUS_RF_KILL_MASK)) { + /* Enable the adapter - sends HOST_COMPLETE */ + if (ipw2100_enable_adapter(priv)) { + printk(KERN_WARNING DRV_NAME + ": %s: failed in call to enable adapter.\n", + priv->net_dev->name); + ipw2100_hw_stop_adapter(priv); + err = -EIO; + goto fail_unlock; + } + + /* Start a scan . . . */ + ipw2100_set_scan_options(priv); + ipw2100_start_scan(priv); + } + + IPW_DEBUG_INFO("exit\n"); + + priv->status |= STATUS_INITIALIZED; + + up(&priv->action_sem); + + return 0; + + fail_unlock: + up(&priv->action_sem); + + fail: + if (dev) { + if (registered) + unregister_netdev(dev); + + ipw2100_hw_stop_adapter(priv); + + ipw2100_disable_interrupts(priv); + + if (dev->irq) + free_irq(dev->irq, priv); + + ipw2100_kill_workqueue(priv); + + /* These are safe to call even if they weren't allocated */ + ipw2100_queues_free(priv); + sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + + free_ieee80211(dev); + pci_set_drvdata(pci_dev, NULL); + } + + if (base_addr) + iounmap(base_addr); + + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + + return err; +} + +static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev; + + if (priv) { + down(&priv->action_sem); + + priv->status &= ~STATUS_INITIALIZED; + + dev = priv->net_dev; + sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + +#ifdef CONFIG_PM + if (ipw2100_firmware.version) + ipw2100_release_firmware(priv, &ipw2100_firmware); +#endif + /* Take down the hardware */ + ipw2100_down(priv); + + /* Release the semaphore so that the network subsystem can + * complete any needed calls into the driver... */ + up(&priv->action_sem); + + /* Unregister the device first - this results in close() + * being called if the device is open. If we free storage + * first, then close() will crash. */ + unregister_netdev(dev); + + /* ipw2100_down will ensure that there is no more pending work + * in the workqueue's, so we can safely remove them now. */ + ipw2100_kill_workqueue(priv); + + ipw2100_queues_free(priv); + + /* Free potential debugging firmware snapshot */ + ipw2100_snapshot_free(priv); + + if (dev->irq) + free_irq(dev->irq, priv); + + if (dev->base_addr) + iounmap((void __iomem *)dev->base_addr); + + free_ieee80211(dev); + } + + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + + IPW_DEBUG_INFO("exit\n"); +} + + +#ifdef CONFIG_PM +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) +static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state) +#else +static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state) +#endif +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev = priv->net_dev; + + IPW_DEBUG_INFO("%s: Going into suspend...\n", + dev->name); + + down(&priv->action_sem); + if (priv->status & STATUS_INITIALIZED) { + /* Take down the device; powers it off, etc. */ + ipw2100_down(priv); + } + + /* Remove the PRESENT state of the device */ + netif_device_detach(dev); + + pci_save_state(pci_dev); + pci_disable_device (pci_dev); + pci_set_power_state(pci_dev, PCI_D3hot); + + up(&priv->action_sem); + + return 0; +} + +static int ipw2100_resume(struct pci_dev *pci_dev) +{ + struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); + struct net_device *dev = priv->net_dev; + u32 val; + + if (IPW2100_PM_DISABLED) + return 0; + + down(&priv->action_sem); + + IPW_DEBUG_INFO("%s: Coming out of suspend...\n", + dev->name); + + pci_set_power_state(pci_dev, PCI_D0); + pci_enable_device(pci_dev); + pci_restore_state(pci_dev); + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries + * from interfering with C3 CPU state. pci_restore_state won't help + * here since it only restores the first 64 bytes pci config header. + */ + pci_read_config_dword(pci_dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); + + /* Set the device back into the PRESENT state; this will also wake + * the queue of needed */ + netif_device_attach(dev); + + /* Bring the device back up */ + if (!(priv->status & STATUS_RF_KILL_SW)) + ipw2100_up(priv, 0); + + up(&priv->action_sem); + + return 0; +} +#endif + + +#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x } + +static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = { + IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */ + IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */ + IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */ + IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */ + + IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */ + IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */ + IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */ + + IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */ + IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */ + IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */ + + IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table); + +static struct pci_driver ipw2100_pci_driver = { + .name = DRV_NAME, + .id_table = ipw2100_pci_id_table, + .probe = ipw2100_pci_init_one, + .remove = __devexit_p(ipw2100_pci_remove_one), +#ifdef CONFIG_PM + .suspend = ipw2100_suspend, + .resume = ipw2100_resume, +#endif +}; + + +/** + * Initialize the ipw2100 driver/module + * + * @returns 0 if ok, < 0 errno node con error. + * + * Note: we cannot init the /proc stuff until the PCI driver is there, + * or we risk an unlikely race condition on someone accessing + * uninitialized data in the PCI dev struct through /proc. + */ +static int __init ipw2100_init(void) +{ + int ret; + + printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); + +#ifdef CONFIG_IEEE80211_NOWEP + IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n"); +#endif + + ret = pci_module_init(&ipw2100_pci_driver); + +#ifdef CONFIG_IPW_DEBUG + ipw2100_debug_level = debug; + driver_create_file(&ipw2100_pci_driver.driver, + &driver_attr_debug_level); +#endif + + return ret; +} + + +/** + * Cleanup ipw2100 driver registration + */ +static void __exit ipw2100_exit(void) +{ + /* FIXME: IPG: check that we have no instances of the devices open */ +#ifdef CONFIG_IPW_DEBUG + driver_remove_file(&ipw2100_pci_driver.driver, + &driver_attr_debug_level); +#endif + pci_unregister_driver(&ipw2100_pci_driver); +} + +module_init(ipw2100_init); +module_exit(ipw2100_exit); + +#define WEXT_USECHANNELS 1 + +static const long ipw2100_frequencies[] = { + 2412, 2417, 2422, 2427, + 2432, 2437, 2442, 2447, + 2452, 2457, 2462, 2467, + 2472, 2484 +}; + +#define FREQ_COUNT (sizeof(ipw2100_frequencies) / \ + sizeof(ipw2100_frequencies[0])) + +static const long ipw2100_rates_11b[] = { + 1000000, + 2000000, + 5500000, + 11000000 +}; + +#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0])) + +static int ipw2100_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b"); + + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + return 0; +} + + +static int ipw2100_wx_set_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_freq *fwrq = &wrqu->freq; + int err = 0; + + if (priv->ieee->iw_mode == IW_MODE_INFRA) + return -EOPNOTSUPP; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + /* if setting by freq convert to channel */ + if (fwrq->e == 1) { + if ((fwrq->m >= (int) 2.412e8 && + fwrq->m <= (int) 2.487e8)) { + int f = fwrq->m / 100000; + int c = 0; + + while ((c < REG_MAX_CHANNEL) && + (f != ipw2100_frequencies[c])) + c++; + + /* hack to fall through */ + fwrq->e = 0; + fwrq->m = c + 1; + } + } + + if (fwrq->e > 0 || fwrq->m > 1000) + return -EOPNOTSUPP; + else { /* Set the channel */ + IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m); + err = ipw2100_set_channel(priv, fwrq->m, 0); + } + + done: + up(&priv->action_sem); + return err; +} + + +static int ipw2100_wx_get_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->freq.e = 0; + + /* If we are associated, trying to associate, or have a statically + * configured CHANNEL then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_CHANNEL || + priv->status & STATUS_ASSOCIATED) + wrqu->freq.m = priv->channel; + else + wrqu->freq.m = 0; + + IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel); + return 0; + +} + +static int ipw2100_wx_set_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode); + + if (wrqu->mode == priv->ieee->iw_mode) + return 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + switch (wrqu->mode) { +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); + break; +#endif /* CONFIG_IPW2100_MONITOR */ + case IW_MODE_ADHOC: + err = ipw2100_switch_mode(priv, IW_MODE_ADHOC); + break; + case IW_MODE_INFRA: + case IW_MODE_AUTO: + default: + err = ipw2100_switch_mode(priv, IW_MODE_INFRA); + break; + } + +done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->mode = priv->ieee->iw_mode; + IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode); + + return 0; +} + + +#define POWER_MODES 5 + +/* Values are in microsecond */ +static const s32 timeout_duration[POWER_MODES] = { + 350000, + 250000, + 75000, + 37000, + 25000, +}; + +static const s32 period_duration[POWER_MODES] = { + 400000, + 700000, + 1000000, + 1000000, + 1000000 +}; + +static int ipw2100_wx_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_range *range = (struct iw_range *)extra; + u16 val; + int i, level; + + wrqu->data.length = sizeof(*range); + memset(range, 0, sizeof(*range)); + + /* Let's try to keep this struct in the same order as in + * linux/include/wireless.h + */ + + /* TODO: See what values we can set, and remove the ones we can't + * set, or fill them with some default data. + */ + + /* ~5 Mb/s real (802.11b) */ + range->throughput = 5 * 1000 * 1000; + +// range->sensitivity; /* signal level threshold range */ + + range->max_qual.qual = 100; + /* TODO: Find real max RSSI and stick here */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + range->max_qual.updated = 7; /* Updated all three */ + + range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ + /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; + range->avg_qual.noise = 0; + range->avg_qual.updated = 7; /* Updated all three */ + + range->num_bitrates = RATE_COUNT; + + for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { + range->bitrate[i] = ipw2100_rates_11b[i]; + } + + range->min_rts = MIN_RTS_THRESHOLD; + range->max_rts = MAX_RTS_THRESHOLD; + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->min_pmp = period_duration[0]; /* Minimal PM period */ + range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */ + range->min_pmt = timeout_duration[POWER_MODES-1]; /* Minimal PM timeout */ + range->max_pmt = timeout_duration[0];/* Maximal PM timeout */ + + /* How to decode max/min PM period */ + range->pmp_flags = IW_POWER_PERIOD; + /* How to decode max/min PM period */ + range->pmt_flags = IW_POWER_TIMEOUT; + /* What PM options are supported */ + range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD; + + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; /* Different token sizes */ + range->num_encoding_sizes = 2; /* Number of entry in the list */ + range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */ +// range->encoding_login_index; /* token index for login token */ + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + range->txpower_capa = IW_TXPOW_DBM; + range->num_txpower = IW_MAX_TXPOWER; + for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER; + i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) / + (IW_MAX_TXPOWER - 1)) + range->txpower[i] = level / 16; + } else { + range->txpower_capa = 0; + range->num_txpower = 0; + } + + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 16; + +// range->retry_capa; /* What retry options are supported */ +// range->retry_flags; /* How to decode max/min retry limit */ +// range->r_time_flags; /* How to decode max/min retry life */ +// range->min_retry; /* Minimal number of retries */ +// range->max_retry; /* Maximal number of retries */ +// range->min_r_time; /* Minimal retry lifetime */ +// range->max_r_time; /* Maximal retry lifetime */ + + range->num_channels = FREQ_COUNT; + + val = 0; + for (i = 0; i < FREQ_COUNT; i++) { + // TODO: Include only legal frequencies for some countries +// if (local->channel_mask & (1 << i)) { + range->freq[val].i = i + 1; + range->freq[val].m = ipw2100_frequencies[i] * 100000; + range->freq[val].e = 1; + val++; +// } + if (val == IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = val; + + IPW_DEBUG_WX("GET Range\n"); + + return 0; +} + +static int ipw2100_wx_set_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + static const unsigned char any[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + static const unsigned char off[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + // sanity checks + if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) + return -EINVAL; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) || + !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) { + /* we disable mandatory BSSID association */ + IPW_DEBUG_WX("exit - disable mandatory BSSID\n"); + priv->config &= ~CFG_STATIC_BSSID; + err = ipw2100_set_mandatory_bssid(priv, NULL, 0); + goto done; + } + + priv->config |= CFG_STATIC_BSSID; + memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN); + + err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0); + + IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n", + wrqu->ap_addr.sa_data[0] & 0xff, + wrqu->ap_addr.sa_data[1] & 0xff, + wrqu->ap_addr.sa_data[2] & 0xff, + wrqu->ap_addr.sa_data[3] & 0xff, + wrqu->ap_addr.sa_data[4] & 0xff, + wrqu->ap_addr.sa_data[5] & 0xff); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + /* If we are associated, trying to associate, or have a statically + * configured BSSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_BSSID || + priv->status & STATUS_ASSOCIATED) { + wrqu->ap_addr.sa_family = ARPHRD_ETHER; + memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN); + } else + memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); + + IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n", + MAC_ARG(wrqu->ap_addr.sa_data)); + return 0; +} + +static int ipw2100_wx_set_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + char *essid = ""; /* ANY */ + int length = 0; + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->essid.flags && wrqu->essid.length) { + length = wrqu->essid.length - 1; + essid = extra; + } + + if (length == 0) { + IPW_DEBUG_WX("Setting ESSID to ANY\n"); + priv->config &= ~CFG_STATIC_ESSID; + err = ipw2100_set_essid(priv, NULL, 0, 0); + goto done; + } + + length = min(length, IW_ESSID_MAX_SIZE); + + priv->config |= CFG_STATIC_ESSID; + + if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) { + IPW_DEBUG_WX("ESSID set to current ESSID.\n"); + err = 0; + goto done; + } + + IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length), + length); + + priv->essid_len = length; + memcpy(priv->essid, essid, priv->essid_len); + + err = ipw2100_set_essid(priv, essid, length, 0); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + /* If we are associated, trying to associate, or have a statically + * configured ESSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_ESSID || + priv->status & STATUS_ASSOCIATED) { + IPW_DEBUG_WX("Getting essid: '%s'\n", + escape_essid(priv->essid, priv->essid_len)); + memcpy(extra, priv->essid, priv->essid_len); + wrqu->essid.length = priv->essid_len; + wrqu->essid.flags = 1; /* active */ + } else { + IPW_DEBUG_WX("Getting essid: ANY\n"); + wrqu->essid.length = 0; + wrqu->essid.flags = 0; /* active */ + } + + return 0; +} + +static int ipw2100_wx_set_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (wrqu->data.length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick)); + memset(priv->nick, 0, sizeof(priv->nick)); + memcpy(priv->nick, extra, wrqu->data.length); + + IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick); + + return 0; +} + +static int ipw2100_wx_get_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->data.length = strlen(priv->nick) + 1; + memcpy(extra, priv->nick, wrqu->data.length); + wrqu->data.flags = 1; /* active */ + + IPW_DEBUG_WX("GET Nickname -> %s \n", extra); + + return 0; +} + +static int ipw2100_wx_set_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + u32 target_rate = wrqu->bitrate.value; + u32 rate; + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + rate = 0; + + if (target_rate == 1000000 || + (!wrqu->bitrate.fixed && target_rate > 1000000)) + rate |= TX_RATE_1_MBIT; + if (target_rate == 2000000 || + (!wrqu->bitrate.fixed && target_rate > 2000000)) + rate |= TX_RATE_2_MBIT; + if (target_rate == 5500000 || + (!wrqu->bitrate.fixed && target_rate > 5500000)) + rate |= TX_RATE_5_5_MBIT; + if (target_rate == 11000000 || + (!wrqu->bitrate.fixed && target_rate > 11000000)) + rate |= TX_RATE_11_MBIT; + if (rate == 0) + rate = DEFAULT_TX_RATES; + + err = ipw2100_set_tx_rates(priv, rate, 0); + + IPW_DEBUG_WX("SET Rate -> %04X \n", rate); + done: + up(&priv->action_sem); + return err; +} + + +static int ipw2100_wx_get_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int val; + int len = sizeof(val); + int err = 0; + + if (!(priv->status & STATUS_ENABLED) || + priv->status & STATUS_RF_KILL_MASK || + !(priv->status & STATUS_ASSOCIATED)) { + wrqu->bitrate.value = 0; + return 0; + } + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); + if (err) { + IPW_DEBUG_WX("failed querying ordinals.\n"); + return err; + } + + switch (val & TX_RATE_MASK) { + case TX_RATE_1_MBIT: + wrqu->bitrate.value = 1000000; + break; + case TX_RATE_2_MBIT: + wrqu->bitrate.value = 2000000; + break; + case TX_RATE_5_5_MBIT: + wrqu->bitrate.value = 5500000; + break; + case TX_RATE_11_MBIT: + wrqu->bitrate.value = 11000000; + break; + default: + wrqu->bitrate.value = 0; + } + + IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_set_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int value, err; + + /* Auto RTS not yet supported */ + if (wrqu->rts.fixed == 0) + return -EINVAL; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->rts.disabled) + value = priv->rts_threshold | RTS_DISABLED; + else { + if (wrqu->rts.value < 1 || + wrqu->rts.value > 2304) { + err = -EINVAL; + goto done; + } + value = wrqu->rts.value; + } + + err = ipw2100_set_rts_threshold(priv, value); + + IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value); + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED; + wrqu->rts.fixed = 1; /* no auto select */ + + /* If RTS is set to the default value, then it is disabled */ + wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0; + + IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value); + + return 0; +} + +static int ipw2100_wx_set_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0, value; + + if (priv->ieee->iw_mode != IW_MODE_ADHOC) + return -EINVAL; + + if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0) + value = IPW_TX_POWER_DEFAULT; + else { + if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM || + wrqu->txpower.value > IPW_TX_POWER_MAX_DBM) + return -EINVAL; + + value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 / + (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM); + } + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + err = ipw2100_set_tx_power(priv, value); + + IPW_DEBUG_WX("SET TX Power -> %d \n", value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (priv->ieee->iw_mode != IW_MODE_ADHOC) { + wrqu->power.disabled = 1; + return 0; + } + + if (priv->tx_power == IPW_TX_POWER_DEFAULT) { + wrqu->power.fixed = 0; + wrqu->power.value = IPW_TX_POWER_MAX_DBM; + wrqu->power.disabled = 1; + } else { + wrqu->power.disabled = 0; + wrqu->power.fixed = 1; + wrqu->power.value = + (priv->tx_power * + (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) / + (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) + + IPW_TX_POWER_MIN_DBM; + } + + wrqu->power.flags = IW_TXPOW_DBM; + + IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value); + + return 0; +} + +static int ipw2100_wx_set_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (!wrqu->frag.fixed) + return -EINVAL; + + if (wrqu->frag.disabled) { + priv->frag_threshold |= FRAG_DISABLED; + priv->ieee->fts = DEFAULT_FTS; + } else { + if (wrqu->frag.value < MIN_FRAG_THRESHOLD || + wrqu->frag.value > MAX_FRAG_THRESHOLD) + return -EINVAL; + + priv->ieee->fts = wrqu->frag.value & ~0x1; + priv->frag_threshold = priv->ieee->fts; + } + + IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts); + + return 0; +} + +static int ipw2100_wx_get_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED; + wrqu->frag.fixed = 0; /* no auto select */ + wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0; + + IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value); + + return 0; +} + +static int ipw2100_wx_set_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + if (wrqu->retry.flags & IW_RETRY_LIFETIME || + wrqu->retry.disabled) + return -EINVAL; + + if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) + return 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->retry.flags & IW_RETRY_MIN) { + err = ipw2100_set_short_retry(priv, wrqu->retry.value); + IPW_DEBUG_WX("SET Short Retry Limit -> %d \n", + wrqu->retry.value); + goto done; + } + + if (wrqu->retry.flags & IW_RETRY_MAX) { + err = ipw2100_set_long_retry(priv, wrqu->retry.value); + IPW_DEBUG_WX("SET Long Retry Limit -> %d \n", + wrqu->retry.value); + goto done; + } + + err = ipw2100_set_short_retry(priv, wrqu->retry.value); + if (!err) + err = ipw2100_set_long_retry(priv, wrqu->retry.value); + + IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value); + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + wrqu->retry.disabled = 0; /* can't be disabled */ + + if ((wrqu->retry.flags & IW_RETRY_TYPE) == + IW_RETRY_LIFETIME) + return -EINVAL; + + if (wrqu->retry.flags & IW_RETRY_MAX) { + wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX; + wrqu->retry.value = priv->long_retry_limit; + } else { + wrqu->retry.flags = + (priv->short_retry_limit != + priv->long_retry_limit) ? + IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT; + + wrqu->retry.value = priv->short_retry_limit; + } + + IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value); + + return 0; +} + +static int ipw2100_wx_set_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + IPW_DEBUG_WX("Initiating scan...\n"); + if (ipw2100_set_scan_options(priv) || + ipw2100_start_scan(priv)) { + IPW_DEBUG_WX("Start scan failed.\n"); + + /* TODO: Mark a scan as pending so when hardware initialized + * a scan starts */ + } + + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra); +} + + +/* + * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c + */ +static int ipw2100_wx_set_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + /* + * No check of STATUS_INITIALIZED required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key); +} + +static int ipw2100_wx_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key); +} + +static int ipw2100_wx_set_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (wrqu->power.disabled) { + priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); + err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); + IPW_DEBUG_WX("SET Power Management Mode -> off\n"); + goto done; + } + + switch (wrqu->power.flags & IW_POWER_MODE) { + case IW_POWER_ON: /* If not specified */ + case IW_POWER_MODE: /* If set all mask */ + case IW_POWER_ALL_R: /* If explicitely state all */ + break; + default: /* Otherwise we don't support it */ + IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", + wrqu->power.flags); + err = -EOPNOTSUPP; + goto done; + } + + /* If the user hasn't specified a power management mode yet, default + * to BATTERY */ + priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; + err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); + + IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", + priv->power_mode); + + done: + up(&priv->action_sem); + return err; + +} + +static int ipw2100_wx_get_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (!(priv->power_mode & IPW_POWER_ENABLED)) { + wrqu->power.disabled = 1; + } else { + wrqu->power.disabled = 0; + wrqu->power.flags = 0; + } + + IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode); + + return 0; +} + + +/* + * + * IWPRIV handlers + * + */ +#ifdef CONFIG_IPW2100_MONITOR +static int ipw2100_wx_set_promisc(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int *parms = (int *)extra; + int enable = (parms[0] > 0); + int err = 0; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (enable) { + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + err = ipw2100_set_channel(priv, parms[1], 0); + goto done; + } + priv->channel = parms[1]; + err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); + } else { + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + err = ipw2100_switch_mode(priv, priv->last_mode); + } + done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_reset(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + if (priv->status & STATUS_INITIALIZED) + schedule_reset(priv); + return 0; +} + +#endif + +static int ipw2100_wx_set_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err = 0, mode = *(int *)extra; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if ((mode < 1) || (mode > POWER_MODES)) + mode = IPW_POWER_AUTO; + + if (priv->power_mode != mode) + err = ipw2100_set_power_mode(priv, mode); + done: + up(&priv->action_sem); + return err; +} + +#define MAX_POWER_STRING 80 +static int ipw2100_wx_get_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + int level = IPW_POWER_LEVEL(priv->power_mode); + s32 timeout, period; + + if (!(priv->power_mode & IPW_POWER_ENABLED)) { + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (Off)", level); + } else { + switch (level) { + case IPW_POWER_MODE_CAM: + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (None)", level); + break; + case IPW_POWER_AUTO: + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d (Auto)", 0); + break; + default: + timeout = timeout_duration[level - 1] / 1000; + period = period_duration[level - 1] / 1000; + snprintf(extra, MAX_POWER_STRING, + "Power save level: %d " + "(Timeout %dms, Period %dms)", + level, timeout, period); + } + } + + wrqu->data.length = strlen(extra) + 1; + + return 0; +} + + +static int ipw2100_wx_set_preamble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw2100_priv *priv = ieee80211_priv(dev); + int err, mode = *(int *)extra; + + down(&priv->action_sem); + if (!(priv->status & STATUS_INITIALIZED)) { + err = -EIO; + goto done; + } + + if (mode == 1) + priv->config |= CFG_LONG_PREAMBLE; + else if (mode == 0) + priv->config &= ~CFG_LONG_PREAMBLE; + else { + err = -EINVAL; + goto done; + } + + err = ipw2100_system_config(priv, 0); + +done: + up(&priv->action_sem); + return err; +} + +static int ipw2100_wx_get_preamble(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + /* + * This can be called at any time. No action lock required + */ + + struct ipw2100_priv *priv = ieee80211_priv(dev); + + if (priv->config & CFG_LONG_PREAMBLE) + snprintf(wrqu->name, IFNAMSIZ, "long (1)"); + else + snprintf(wrqu->name, IFNAMSIZ, "auto (0)"); + + return 0; +} + +static iw_handler ipw2100_wx_handlers[] = +{ + NULL, /* SIOCSIWCOMMIT */ + ipw2100_wx_get_name, /* SIOCGIWNAME */ + NULL, /* SIOCSIWNWID */ + NULL, /* SIOCGIWNWID */ + ipw2100_wx_set_freq, /* SIOCSIWFREQ */ + ipw2100_wx_get_freq, /* SIOCGIWFREQ */ + ipw2100_wx_set_mode, /* SIOCSIWMODE */ + ipw2100_wx_get_mode, /* SIOCGIWMODE */ + NULL, /* SIOCSIWSENS */ + NULL, /* SIOCGIWSENS */ + NULL, /* SIOCSIWRANGE */ + ipw2100_wx_get_range, /* SIOCGIWRANGE */ + NULL, /* SIOCSIWPRIV */ + NULL, /* SIOCGIWPRIV */ + NULL, /* SIOCSIWSTATS */ + NULL, /* SIOCGIWSTATS */ + NULL, /* SIOCSIWSPY */ + NULL, /* SIOCGIWSPY */ + NULL, /* SIOCGIWTHRSPY */ + NULL, /* SIOCWIWTHRSPY */ + ipw2100_wx_set_wap, /* SIOCSIWAP */ + ipw2100_wx_get_wap, /* SIOCGIWAP */ + NULL, /* -- hole -- */ + NULL, /* SIOCGIWAPLIST -- deprecated */ + ipw2100_wx_set_scan, /* SIOCSIWSCAN */ + ipw2100_wx_get_scan, /* SIOCGIWSCAN */ + ipw2100_wx_set_essid, /* SIOCSIWESSID */ + ipw2100_wx_get_essid, /* SIOCGIWESSID */ + ipw2100_wx_set_nick, /* SIOCSIWNICKN */ + ipw2100_wx_get_nick, /* SIOCGIWNICKN */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + ipw2100_wx_set_rate, /* SIOCSIWRATE */ + ipw2100_wx_get_rate, /* SIOCGIWRATE */ + ipw2100_wx_set_rts, /* SIOCSIWRTS */ + ipw2100_wx_get_rts, /* SIOCGIWRTS */ + ipw2100_wx_set_frag, /* SIOCSIWFRAG */ + ipw2100_wx_get_frag, /* SIOCGIWFRAG */ + ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */ + ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */ + ipw2100_wx_set_retry, /* SIOCSIWRETRY */ + ipw2100_wx_get_retry, /* SIOCGIWRETRY */ + ipw2100_wx_set_encode, /* SIOCSIWENCODE */ + ipw2100_wx_get_encode, /* SIOCGIWENCODE */ + ipw2100_wx_set_power, /* SIOCSIWPOWER */ + ipw2100_wx_get_power, /* SIOCGIWPOWER */ +}; + +#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV +#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1 +#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2 +#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3 +#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4 +#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5 + +static const struct iw_priv_args ipw2100_private_args[] = { + +#ifdef CONFIG_IPW2100_MONITOR + { + IPW2100_PRIV_SET_MONITOR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor" + }, + { + IPW2100_PRIV_RESET, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset" + }, +#endif /* CONFIG_IPW2100_MONITOR */ + + { + IPW2100_PRIV_SET_POWER, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power" + }, + { + IPW2100_PRIV_GET_POWER, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power" + }, + { + IPW2100_PRIV_SET_LONGPREAMBLE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble" + }, + { + IPW2100_PRIV_GET_LONGPREAMBLE, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble" + }, +}; + +static iw_handler ipw2100_private_handler[] = { +#ifdef CONFIG_IPW2100_MONITOR + ipw2100_wx_set_promisc, + ipw2100_wx_reset, +#else /* CONFIG_IPW2100_MONITOR */ + NULL, + NULL, +#endif /* CONFIG_IPW2100_MONITOR */ + ipw2100_wx_set_powermode, + ipw2100_wx_get_powermode, + ipw2100_wx_set_preamble, + ipw2100_wx_get_preamble, +}; + +static struct iw_handler_def ipw2100_wx_handler_def = +{ + .standard = ipw2100_wx_handlers, + .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler), + .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(ipw2100_private_args) / + sizeof(struct iw_priv_args), + .private = (iw_handler *)ipw2100_private_handler, + .private_args = (struct iw_priv_args *)ipw2100_private_args, +}; + +/* + * Get wireless statistics. + * Called by /proc/net/wireless + * Also called by SIOCGIWSTATS + */ +static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev) +{ + enum { + POOR = 30, + FAIR = 60, + GOOD = 80, + VERY_GOOD = 90, + EXCELLENT = 95, + PERFECT = 100 + }; + int rssi_qual; + int tx_qual; + int beacon_qual; + + struct ipw2100_priv *priv = ieee80211_priv(dev); + struct iw_statistics *wstats; + u32 rssi, quality, tx_retries, missed_beacons, tx_failures; + u32 ord_len = sizeof(u32); + + if (!priv) + return (struct iw_statistics *) NULL; + + wstats = &priv->wstats; + + /* if hw is disabled, then ipw2100_get_ordinal() can't be called. + * ipw2100_wx_wireless_stats seems to be called before fw is + * initialized. STATUS_ASSOCIATED will only be set if the hw is up + * and associated; if not associcated, the values are all meaningless + * anyway, so set them all to NULL and INVALID */ + if (!(priv->status & STATUS_ASSOCIATED)) { + wstats->miss.beacon = 0; + wstats->discard.retries = 0; + wstats->qual.qual = 0; + wstats->qual.level = 0; + wstats->qual.noise = 0; + wstats->qual.updated = 7; + wstats->qual.updated |= IW_QUAL_NOISE_INVALID | + IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; + return wstats; + } + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS, + &missed_beacons, &ord_len)) + goto fail_get_ordinal; + + /* If we don't have a connection the quality and level is 0*/ + if (!(priv->status & STATUS_ASSOCIATED)) { + wstats->qual.qual = 0; + wstats->qual.level = 0; + } else { + if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR, + &rssi, &ord_len)) + goto fail_get_ordinal; + wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; + if (rssi < 10) + rssi_qual = rssi * POOR / 10; + else if (rssi < 15) + rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR; + else if (rssi < 20) + rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR; + else if (rssi < 30) + rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) / + 10 + GOOD; + else + rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) / + 10 + VERY_GOOD; + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES, + &tx_retries, &ord_len)) + goto fail_get_ordinal; + + if (tx_retries > 75) + tx_qual = (90 - tx_retries) * POOR / 15; + else if (tx_retries > 70) + tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR; + else if (tx_retries > 65) + tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR; + else if (tx_retries > 50) + tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) / + 15 + GOOD; + else + tx_qual = (50 - tx_retries) * + (PERFECT - VERY_GOOD) / 50 + VERY_GOOD; + + if (missed_beacons > 50) + beacon_qual = (60 - missed_beacons) * POOR / 10; + else if (missed_beacons > 40) + beacon_qual = (50 - missed_beacons) * (FAIR - POOR) / + 10 + POOR; + else if (missed_beacons > 32) + beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) / + 18 + FAIR; + else if (missed_beacons > 20) + beacon_qual = (32 - missed_beacons) * + (VERY_GOOD - GOOD) / 20 + GOOD; + else + beacon_qual = (20 - missed_beacons) * + (PERFECT - VERY_GOOD) / 20 + VERY_GOOD; + + quality = min(beacon_qual, min(tx_qual, rssi_qual)); + +#ifdef CONFIG_IPW_DEBUG + if (beacon_qual == quality) + IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); + else if (tx_qual == quality) + IPW_DEBUG_WX("Quality clamped by Tx Retries\n"); + else if (quality != 100) + IPW_DEBUG_WX("Quality clamped by Signal Strength\n"); + else + IPW_DEBUG_WX("Quality not clamped.\n"); +#endif + + wstats->qual.qual = quality; + wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; + } + + wstats->qual.noise = 0; + wstats->qual.updated = 7; + wstats->qual.updated |= IW_QUAL_NOISE_INVALID; + + /* FIXME: this is percent and not a # */ + wstats->miss.beacon = missed_beacons; + + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES, + &tx_failures, &ord_len)) + goto fail_get_ordinal; + wstats->discard.retries = tx_failures; + + return wstats; + + fail_get_ordinal: + IPW_DEBUG_WX("failed querying ordinals.\n"); + + return (struct iw_statistics *) NULL; +} + +static void ipw2100_wx_event_work(struct ipw2100_priv *priv) +{ + union iwreq_data wrqu; + int len = ETH_ALEN; + + if (priv->status & STATUS_STOPPING) + return; + + down(&priv->action_sem); + + IPW_DEBUG_WX("enter\n"); + + up(&priv->action_sem); + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Fetch BSSID from the hardware */ + if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) || + priv->status & STATUS_RF_KILL_MASK || + ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, + &priv->bssid, &len)) { + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + } else { + /* We now have the BSSID, so can finish setting to the full + * associated state */ + memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); + memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN); + priv->status &= ~STATUS_ASSOCIATING; + priv->status |= STATUS_ASSOCIATED; + netif_carrier_on(priv->net_dev); + if (netif_queue_stopped(priv->net_dev)) { + IPW_DEBUG_INFO("Waking net queue.\n"); + netif_wake_queue(priv->net_dev); + } else { + IPW_DEBUG_INFO("Starting net queue.\n"); + netif_start_queue(priv->net_dev); + } + } + + if (!(priv->status & STATUS_ASSOCIATED)) { + IPW_DEBUG_WX("Configuring ESSID\n"); + down(&priv->action_sem); + /* This is a disassociation event, so kick the firmware to + * look for another AP */ + if (priv->config & CFG_STATIC_ESSID) + ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0); + else + ipw2100_set_essid(priv, NULL, 0, 0); + up(&priv->action_sem); + } + + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); +} + +#define IPW2100_FW_MAJOR_VERSION 1 +#define IPW2100_FW_MINOR_VERSION 3 + +#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8) +#define IPW2100_FW_MAJOR(x) (x & 0xff) + +#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \ + IPW2100_FW_MAJOR_VERSION) + +#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \ +"." __stringify(IPW2100_FW_MINOR_VERSION) + +#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw" + + +/* + +BINARY FIRMWARE HEADER FORMAT + +offset length desc +0 2 version +2 2 mode == 0:BSS,1:IBSS,2:MONITOR +4 4 fw_len +8 4 uc_len +C fw_len firmware data +12 + fw_len uc_len microcode data + +*/ + +struct ipw2100_fw_header { + short version; + short mode; + unsigned int fw_size; + unsigned int uc_size; +} __attribute__ ((packed)); + + + +static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw) +{ + struct ipw2100_fw_header *h = + (struct ipw2100_fw_header *)fw->fw_entry->data; + + if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { + printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " + "(detected version id of %u). " + "See Documentation/networking/README.ipw2100\n", + h->version); + return 1; + } + + fw->version = h->version; + fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header); + fw->fw.size = h->fw_size; + fw->uc.data = fw->fw.data + h->fw_size; + fw->uc.size = h->uc_size; + + return 0; +} + + +static int ipw2100_get_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + char *fw_name; + int rc; + + IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n", + priv->net_dev->name); + + switch (priv->ieee->iw_mode) { + case IW_MODE_ADHOC: + fw_name = IPW2100_FW_NAME("-i"); + break; +#ifdef CONFIG_IPW2100_MONITOR + case IW_MODE_MONITOR: + fw_name = IPW2100_FW_NAME("-p"); + break; +#endif + case IW_MODE_INFRA: + default: + fw_name = IPW2100_FW_NAME(""); + break; + } + + rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); + + if (rc < 0) { + printk(KERN_ERR DRV_NAME ": " + "%s: Firmware '%s' not available or load failed.\n", + priv->net_dev->name, fw_name); + return rc; + } + IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, + fw->fw_entry->size); + + ipw2100_mod_firmware_load(fw); + + return 0; +} + +static void ipw2100_release_firmware(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + fw->version = 0; + if (fw->fw_entry) + release_firmware(fw->fw_entry); + fw->fw_entry = NULL; +} + + +static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, + size_t max) +{ + char ver[MAX_FW_VERSION_LEN]; + u32 len = MAX_FW_VERSION_LEN; + u32 tmp; + int i; + /* firmware version is an ascii string (max len of 14) */ + if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, + ver, &len)) + return -EIO; + tmp = max; + if (len >= max) + len = max - 1; + for (i = 0; i < len; i++) + buf[i] = ver[i]; + buf[i] = '\0'; + return tmp; +} + +static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, + size_t max) +{ + u32 ver; + u32 len = sizeof(ver); + /* microcode version is a 32 bit integer */ + if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, + &ver, &len)) + return -EIO; + return snprintf(buf, max, "%08X", ver); +} + +/* + * On exit, the firmware will have been freed from the fw list + */ +static int ipw2100_fw_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + /* firmware is constructed of N contiguous entries, each entry is + * structured as: + * + * offset sie desc + * 0 4 address to write to + * 4 2 length of data run + * 6 length data + */ + unsigned int addr; + unsigned short len; + + const unsigned char *firmware_data = fw->fw.data; + unsigned int firmware_data_left = fw->fw.size; + + while (firmware_data_left > 0) { + addr = *(u32 *)(firmware_data); + firmware_data += 4; + firmware_data_left -= 4; + + len = *(u16 *)(firmware_data); + firmware_data += 2; + firmware_data_left -= 2; + + if (len > 32) { + printk(KERN_ERR DRV_NAME ": " + "Invalid firmware run-length of %d bytes\n", + len); + return -EINVAL; + } + + write_nic_memory(priv->net_dev, addr, len, firmware_data); + firmware_data += len; + firmware_data_left -= len; + } + + return 0; +} + +struct symbol_alive_response { + u8 cmd_id; + u8 seq_num; + u8 ucode_rev; + u8 eeprom_valid; + u16 valid_flags; + u8 IEEE_addr[6]; + u16 flags; + u16 pcb_rev; + u16 clock_settle_time; // 1us LSB + u16 powerup_settle_time; // 1us LSB + u16 hop_settle_time; // 1us LSB + u8 date[3]; // month, day, year + u8 time[2]; // hours, minutes + u8 ucode_valid; +}; + +static int ipw2100_ucode_download(struct ipw2100_priv *priv, + struct ipw2100_fw *fw) +{ + struct net_device *dev = priv->net_dev; + const unsigned char *microcode_data = fw->uc.data; + unsigned int microcode_data_left = fw->uc.size; + void __iomem *reg = (void __iomem *)dev->base_addr; + + struct symbol_alive_response response; + int i, j; + u8 data; + + /* Symbol control */ + write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); + readl(reg); + write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); + readl(reg); + + /* HW config */ + write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ + readl(reg); + write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ + readl(reg); + + /* EN_CS_ACCESS bit to reset control store pointer */ + write_nic_byte(dev, 0x210000, 0x40); + readl(reg); + write_nic_byte(dev, 0x210000, 0x0); + readl(reg); + write_nic_byte(dev, 0x210000, 0x40); + readl(reg); + + /* copy microcode from buffer into Symbol */ + + while (microcode_data_left > 0) { + write_nic_byte(dev, 0x210010, *microcode_data++); + write_nic_byte(dev, 0x210010, *microcode_data++); + microcode_data_left -= 2; + } + + /* EN_CS_ACCESS bit to reset the control store pointer */ + write_nic_byte(dev, 0x210000, 0x0); + readl(reg); + + /* Enable System (Reg 0) + * first enable causes garbage in RX FIFO */ + write_nic_byte(dev, 0x210000, 0x0); + readl(reg); + write_nic_byte(dev, 0x210000, 0x80); + readl(reg); + + /* Reset External Baseband Reg */ + write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); + readl(reg); + write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); + readl(reg); + + /* HW Config (Reg 5) */ + write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 + readl(reg); + write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 + readl(reg); + + /* Enable System (Reg 0) + * second enable should be OK */ + write_nic_byte(dev, 0x210000, 0x00); // clear enable system + readl(reg); + write_nic_byte(dev, 0x210000, 0x80); // set enable system + + /* check Symbol is enabled - upped this from 5 as it wasn't always + * catching the update */ + for (i = 0; i < 10; i++) { + udelay(10); + + /* check Dino is enabled bit */ + read_nic_byte(dev, 0x210000, &data); + if (data & 0x1) + break; + } + + if (i == 10) { + printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", + dev->name); + return -EIO; + } + + /* Get Symbol alive response */ + for (i = 0; i < 30; i++) { + /* Read alive response structure */ + for (j = 0; + j < (sizeof(struct symbol_alive_response) >> 1); + j++) + read_nic_word(dev, 0x210004, + ((u16 *)&response) + j); + + if ((response.cmd_id == 1) && + (response.ucode_valid == 0x1)) + break; + udelay(10); + } + + if (i == 30) { + printk(KERN_ERR DRV_NAME ": %s: No response from Symbol - hw not alive\n", + dev->name); + printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response)); + return -EIO; + } + + return 0; +} diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h new file mode 100644 index 00000000000..2a3cdbd5016 --- /dev/null +++ b/drivers/net/wireless/ipw2100.h @@ -0,0 +1,1167 @@ +/****************************************************************************** + + Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ +#ifndef _IPW2100_H +#define _IPW2100_H + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <asm/io.h> +#include <linux/socket.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/version.h> +#include <net/iw_handler.h> // new driver API + +#include <net/ieee80211.h> + +#include <linux/workqueue.h> + +struct ipw2100_priv; +struct ipw2100_tx_packet; +struct ipw2100_rx_packet; + +#define IPW_DL_UNINIT 0x80000000 +#define IPW_DL_NONE 0x00000000 +#define IPW_DL_ALL 0x7FFFFFFF + +/* + * To use the debug system; + * + * If you are defining a new debug classification, simply add it to the #define + * list here in the form of: + * + * #define IPW_DL_xxxx VALUE + * + * shifting value to the left one bit from the previous entry. xxxx should be + * the name of the classification (for example, WEP) + * + * You then need to either add a IPW2100_xxxx_DEBUG() macro definition for your + * classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want + * to send output to that classification. + * + * To add your debug level to the list of levels seen when you perform + * + * % cat /proc/net/ipw2100/debug_level + * + * you simply need to add your entry to the ipw2100_debug_levels array. + * + * If you do not see debug_level in /proc/net/ipw2100 then you do not have + * CONFIG_IPW_DEBUG defined in your kernel configuration + * + */ + +#define IPW_DL_ERROR (1<<0) +#define IPW_DL_WARNING (1<<1) +#define IPW_DL_INFO (1<<2) +#define IPW_DL_WX (1<<3) +#define IPW_DL_HC (1<<5) +#define IPW_DL_STATE (1<<6) + +#define IPW_DL_NOTIF (1<<10) +#define IPW_DL_SCAN (1<<11) +#define IPW_DL_ASSOC (1<<12) +#define IPW_DL_DROP (1<<13) + +#define IPW_DL_IOCTL (1<<14) +#define IPW_DL_RF_KILL (1<<17) + + +#define IPW_DL_MANAGE (1<<15) +#define IPW_DL_FW (1<<16) + +#define IPW_DL_FRAG (1<<21) +#define IPW_DL_WEP (1<<22) +#define IPW_DL_TX (1<<23) +#define IPW_DL_RX (1<<24) +#define IPW_DL_ISR (1<<25) +#define IPW_DL_IO (1<<26) +#define IPW_DL_TRACE (1<<28) + +#define IPW_DEBUG_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a) +#define IPW_DEBUG_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a) +#define IPW_DEBUG_INFO(f...) IPW_DEBUG(IPW_DL_INFO, ## f) +#define IPW_DEBUG_WX(f...) IPW_DEBUG(IPW_DL_WX, ## f) +#define IPW_DEBUG_SCAN(f...) IPW_DEBUG(IPW_DL_SCAN, ## f) +#define IPW_DEBUG_NOTIF(f...) IPW_DEBUG(IPW_DL_NOTIF, ## f) +#define IPW_DEBUG_TRACE(f...) IPW_DEBUG(IPW_DL_TRACE, ## f) +#define IPW_DEBUG_RX(f...) IPW_DEBUG(IPW_DL_RX, ## f) +#define IPW_DEBUG_TX(f...) IPW_DEBUG(IPW_DL_TX, ## f) +#define IPW_DEBUG_ISR(f...) IPW_DEBUG(IPW_DL_ISR, ## f) +#define IPW_DEBUG_MANAGEMENT(f...) IPW_DEBUG(IPW_DL_MANAGE, ## f) +#define IPW_DEBUG_WEP(f...) IPW_DEBUG(IPW_DL_WEP, ## f) +#define IPW_DEBUG_HC(f...) IPW_DEBUG(IPW_DL_HC, ## f) +#define IPW_DEBUG_FRAG(f...) IPW_DEBUG(IPW_DL_FRAG, ## f) +#define IPW_DEBUG_FW(f...) IPW_DEBUG(IPW_DL_FW, ## f) +#define IPW_DEBUG_RF_KILL(f...) IPW_DEBUG(IPW_DL_RF_KILL, ## f) +#define IPW_DEBUG_DROP(f...) IPW_DEBUG(IPW_DL_DROP, ## f) +#define IPW_DEBUG_IO(f...) IPW_DEBUG(IPW_DL_IO, ## f) +#define IPW_DEBUG_IOCTL(f...) IPW_DEBUG(IPW_DL_IOCTL, ## f) +#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a) +#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a) + +enum { + IPW_HW_STATE_DISABLED = 1, + IPW_HW_STATE_ENABLED = 0 +}; + +struct ssid_context { + char ssid[IW_ESSID_MAX_SIZE + 1]; + int ssid_len; + unsigned char bssid[ETH_ALEN]; + int port_type; + int channel; + +}; + +extern const char *port_type_str[]; +extern const char *band_str[]; + +#define NUMBER_OF_BD_PER_COMMAND_PACKET 1 +#define NUMBER_OF_BD_PER_DATA_PACKET 2 + +#define IPW_MAX_BDS 6 +#define NUMBER_OF_OVERHEAD_BDS_PER_PACKETR 2 +#define NUMBER_OF_BDS_TO_LEAVE_FOR_COMMANDS 1 + +#define REQUIRED_SPACE_IN_RING_FOR_COMMAND_PACKET \ + (IPW_BD_QUEUE_W_R_MIN_SPARE + NUMBER_OF_BD_PER_COMMAND_PACKET) + +struct bd_status { + union { + struct { u8 nlf:1, txType:2, intEnabled:1, reserved:4;} fields; + u8 field; + } info; +} __attribute__ ((packed)); + +struct ipw2100_bd { + u32 host_addr; + u32 buf_length; + struct bd_status status; + /* number of fragments for frame (should be set only for + * 1st TBD) */ + u8 num_fragments; + u8 reserved[6]; +} __attribute__ ((packed)); + +#define IPW_BD_QUEUE_LENGTH(n) (1<<n) +#define IPW_BD_ALIGNMENT(L) (L*sizeof(struct ipw2100_bd)) + +#define IPW_BD_STATUS_TX_FRAME_802_3 0x00 +#define IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT 0x01 +#define IPW_BD_STATUS_TX_FRAME_COMMAND 0x02 +#define IPW_BD_STATUS_TX_FRAME_802_11 0x04 +#define IPW_BD_STATUS_TX_INTERRUPT_ENABLE 0x08 + +struct ipw2100_bd_queue { + /* driver (virtual) pointer to queue */ + struct ipw2100_bd *drv; + + /* firmware (physical) pointer to queue */ + dma_addr_t nic; + + /* Length of phy memory allocated for BDs */ + u32 size; + + /* Number of BDs in queue (and in array) */ + u32 entries; + + /* Number of available BDs (invalid for NIC BDs) */ + u32 available; + + /* Offset of oldest used BD in array (next one to + * check for completion) */ + u32 oldest; + + /* Offset of next available (unused) BD */ + u32 next; +}; + +#define RX_QUEUE_LENGTH 256 +#define TX_QUEUE_LENGTH 256 +#define HW_QUEUE_LENGTH 256 + +#define TX_PENDED_QUEUE_LENGTH (TX_QUEUE_LENGTH / NUMBER_OF_BD_PER_DATA_PACKET) + +#define STATUS_TYPE_MASK 0x0000000f +#define COMMAND_STATUS_VAL 0 +#define STATUS_CHANGE_VAL 1 +#define P80211_DATA_VAL 2 +#define P8023_DATA_VAL 3 +#define HOST_NOTIFICATION_VAL 4 + +#define IPW2100_RSSI_TO_DBM (-98) + +struct ipw2100_status { + u32 frame_size; + u16 status_fields; + u8 flags; +#define IPW_STATUS_FLAG_DECRYPTED (1<<0) +#define IPW_STATUS_FLAG_WEP_ENCRYPTED (1<<1) +#define IPW_STATUS_FLAG_CRC_ERROR (1<<2) + u8 rssi; +} __attribute__ ((packed)); + +struct ipw2100_status_queue { + /* driver (virtual) pointer to queue */ + struct ipw2100_status *drv; + + /* firmware (physical) pointer to queue */ + dma_addr_t nic; + + /* Length of phy memory allocated for BDs */ + u32 size; +}; + +#define HOST_COMMAND_PARAMS_REG_LEN 100 +#define CMD_STATUS_PARAMS_REG_LEN 3 + +#define IPW_WPA_CAPABILITIES 0x1 +#define IPW_WPA_LISTENINTERVAL 0x2 +#define IPW_WPA_AP_ADDRESS 0x4 + +#define IPW_MAX_VAR_IE_LEN ((HOST_COMMAND_PARAMS_REG_LEN - 4) * sizeof(u32)) + +struct ipw2100_wpa_assoc_frame { + u16 fixed_ie_mask; + struct { + u16 capab_info; + u16 listen_interval; + u8 current_ap[ETH_ALEN]; + } fixed_ies; + u32 var_ie_len; + u8 var_ie[IPW_MAX_VAR_IE_LEN]; +}; + +#define IPW_BSS 1 +#define IPW_MONITOR 2 +#define IPW_IBSS 3 + +/** + * @struct _tx_cmd - HWCommand + * @brief H/W command structure. + */ +struct ipw2100_cmd_header { + u32 host_command_reg; + u32 host_command_reg1; + u32 sequence; + u32 host_command_len_reg; + u32 host_command_params_reg[HOST_COMMAND_PARAMS_REG_LEN]; + u32 cmd_status_reg; + u32 cmd_status_params_reg[CMD_STATUS_PARAMS_REG_LEN]; + u32 rxq_base_ptr; + u32 rxq_next_ptr; + u32 rxq_host_ptr; + u32 txq_base_ptr; + u32 txq_next_ptr; + u32 txq_host_ptr; + u32 tx_status_reg; + u32 reserved; + u32 status_change_reg; + u32 reserved1[3]; + u32 *ordinal1_ptr; + u32 *ordinal2_ptr; +} __attribute__ ((packed)); + +struct ipw2100_data_header { + u32 host_command_reg; + u32 host_command_reg1; + u8 encrypted; // BOOLEAN in win! TRUE if frame is enc by driver + u8 needs_encryption; // BOOLEAN in win! TRUE if frma need to be enc in NIC + u8 wep_index; // 0 no key, 1-4 key index, 0xff immediate key + u8 key_size; // 0 no imm key, 0x5 64bit encr, 0xd 128bit encr, 0x10 128bit encr and 128bit IV + u8 key[16]; + u8 reserved[10]; // f/w reserved + u8 src_addr[ETH_ALEN]; + u8 dst_addr[ETH_ALEN]; + u16 fragment_size; +} __attribute__ ((packed)); + +/* Host command data structure */ +struct host_command { + u32 host_command; // COMMAND ID + u32 host_command1; // COMMAND ID + u32 host_command_sequence; // UNIQUE COMMAND NUMBER (ID) + u32 host_command_length; // LENGTH + u32 host_command_parameters[HOST_COMMAND_PARAMS_REG_LEN]; // COMMAND PARAMETERS +} __attribute__ ((packed)); + + +typedef enum { + POWER_ON_RESET, + EXIT_POWER_DOWN_RESET, + SW_RESET, + EEPROM_RW, + SW_RE_INIT +} ipw2100_reset_event; + +enum { + COMMAND = 0xCAFE, + DATA, + RX +}; + + +struct ipw2100_tx_packet { + int type; + int index; + union { + struct { /* COMMAND */ + struct ipw2100_cmd_header* cmd; + dma_addr_t cmd_phys; + } c_struct; + struct { /* DATA */ + struct ipw2100_data_header* data; + dma_addr_t data_phys; + struct ieee80211_txb *txb; + } d_struct; + } info; + int jiffy_start; + + struct list_head list; +}; + + +struct ipw2100_rx_packet { + struct ipw2100_rx *rxp; + dma_addr_t dma_addr; + int jiffy_start; + struct sk_buff *skb; + struct list_head list; +}; + +#define FRAG_DISABLED (1<<31) +#define RTS_DISABLED (1<<31) +#define MAX_RTS_THRESHOLD 2304U +#define MIN_RTS_THRESHOLD 1U +#define DEFAULT_RTS_THRESHOLD 1000U + +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +struct ipw2100_ordinals { + u32 table1_addr; + u32 table2_addr; + u32 table1_size; + u32 table2_size; +}; + +/* Host Notification header */ +struct ipw2100_notification { + u32 hnhdr_subtype; /* type of host notification */ + u32 hnhdr_size; /* size in bytes of data + or number of entries, if table. + Does NOT include header */ +} __attribute__ ((packed)); + +#define MAX_KEY_SIZE 16 +#define MAX_KEYS 8 + +#define IPW2100_WEP_ENABLE (1<<1) +#define IPW2100_WEP_DROP_CLEAR (1<<2) + +#define IPW_NONE_CIPHER (1<<0) +#define IPW_WEP40_CIPHER (1<<1) +#define IPW_TKIP_CIPHER (1<<2) +#define IPW_CCMP_CIPHER (1<<4) +#define IPW_WEP104_CIPHER (1<<5) +#define IPW_CKIP_CIPHER (1<<6) + +#define IPW_AUTH_OPEN 0 +#define IPW_AUTH_SHARED 1 + +struct statistic { + int value; + int hi; + int lo; +}; + +#define INIT_STAT(x) do { \ + (x)->value = (x)->hi = 0; \ + (x)->lo = 0x7fffffff; \ +} while (0) +#define SET_STAT(x,y) do { \ + (x)->value = y; \ + if ((x)->value > (x)->hi) (x)->hi = (x)->value; \ + if ((x)->value < (x)->lo) (x)->lo = (x)->value; \ +} while (0) +#define INC_STAT(x) do { if (++(x)->value > (x)->hi) (x)->hi = (x)->value; } \ +while (0) +#define DEC_STAT(x) do { if (--(x)->value < (x)->lo) (x)->lo = (x)->value; } \ +while (0) + +#define IPW2100_ERROR_QUEUE 5 + +/* Power management code: enable or disable? */ +enum { +#ifdef CONFIG_PM + IPW2100_PM_DISABLED = 0, + PM_STATE_SIZE = 16, +#else + IPW2100_PM_DISABLED = 1, + PM_STATE_SIZE = 0, +#endif +}; + +#define STATUS_POWERED (1<<0) +#define STATUS_CMD_ACTIVE (1<<1) /**< host command in progress */ +#define STATUS_RUNNING (1<<2) /* Card initialized, but not enabled */ +#define STATUS_ENABLED (1<<3) /* Card enabled -- can scan,Tx,Rx */ +#define STATUS_STOPPING (1<<4) /* Card is in shutdown phase */ +#define STATUS_INITIALIZED (1<<5) /* Card is ready for external calls */ +#define STATUS_ASSOCIATING (1<<9) /* Associated, but no BSSID yet */ +#define STATUS_ASSOCIATED (1<<10) /* Associated and BSSID valid */ +#define STATUS_INT_ENABLED (1<<11) +#define STATUS_RF_KILL_HW (1<<12) +#define STATUS_RF_KILL_SW (1<<13) +#define STATUS_RF_KILL_MASK (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW) +#define STATUS_EXIT_PENDING (1<<14) + +#define STATUS_SCAN_PENDING (1<<23) +#define STATUS_SCANNING (1<<24) +#define STATUS_SCAN_ABORTING (1<<25) +#define STATUS_SCAN_COMPLETE (1<<26) +#define STATUS_WX_EVENT_PENDING (1<<27) +#define STATUS_RESET_PENDING (1<<29) +#define STATUS_SECURITY_UPDATED (1<<30) /* Security sync needed */ + + + +/* Internal NIC states */ +#define IPW_STATE_INITIALIZED (1<<0) +#define IPW_STATE_COUNTRY_FOUND (1<<1) +#define IPW_STATE_ASSOCIATED (1<<2) +#define IPW_STATE_ASSN_LOST (1<<3) +#define IPW_STATE_ASSN_CHANGED (1<<4) +#define IPW_STATE_SCAN_COMPLETE (1<<5) +#define IPW_STATE_ENTERED_PSP (1<<6) +#define IPW_STATE_LEFT_PSP (1<<7) +#define IPW_STATE_RF_KILL (1<<8) +#define IPW_STATE_DISABLED (1<<9) +#define IPW_STATE_POWER_DOWN (1<<10) +#define IPW_STATE_SCANNING (1<<11) + + + +#define CFG_STATIC_CHANNEL (1<<0) /* Restrict assoc. to single channel */ +#define CFG_STATIC_ESSID (1<<1) /* Restrict assoc. to single SSID */ +#define CFG_STATIC_BSSID (1<<2) /* Restrict assoc. to single BSSID */ +#define CFG_CUSTOM_MAC (1<<3) +#define CFG_LONG_PREAMBLE (1<<4) +#define CFG_ASSOCIATE (1<<6) +#define CFG_FIXED_RATE (1<<7) +#define CFG_ADHOC_CREATE (1<<8) +#define CFG_C3_DISABLED (1<<9) +#define CFG_PASSIVE_SCAN (1<<10) + +#define CAP_SHARED_KEY (1<<0) /* Off = OPEN */ +#define CAP_PRIVACY_ON (1<<1) /* Off = No privacy */ + +struct ipw2100_priv { + + int stop_hang_check; /* Set 1 when shutting down to kill hang_check */ + int stop_rf_kill; /* Set 1 when shutting down to kill rf_kill */ + + struct ieee80211_device *ieee; + unsigned long status; + unsigned long config; + unsigned long capability; + + /* Statistics */ + int resets; + int reset_backoff; + + /* Context */ + u8 essid[IW_ESSID_MAX_SIZE]; + u8 essid_len; + u8 bssid[ETH_ALEN]; + u8 channel; + int last_mode; + int cstate_limit; + + unsigned long connect_start; + unsigned long last_reset; + + u32 channel_mask; + u32 fatal_error; + u32 fatal_errors[IPW2100_ERROR_QUEUE]; + u32 fatal_index; + int eeprom_version; + int firmware_version; + unsigned long hw_features; + int hangs; + u32 last_rtc; + int dump_raw; /* 1 to dump raw bytes in /sys/.../memory */ + u8* snapshot[0x30]; + + u8 mandatory_bssid_mac[ETH_ALEN]; + u8 mac_addr[ETH_ALEN]; + + int power_mode; + + /* WEP data */ + struct ieee80211_security sec; + int messages_sent; + + + int short_retry_limit; + int long_retry_limit; + + u32 rts_threshold; + u32 frag_threshold; + + int in_isr; + + u32 tx_rates; + int tx_power; + u32 beacon_interval; + + char nick[IW_ESSID_MAX_SIZE + 1]; + + struct ipw2100_status_queue status_queue; + + struct statistic txq_stat; + struct statistic rxq_stat; + struct ipw2100_bd_queue rx_queue; + struct ipw2100_bd_queue tx_queue; + struct ipw2100_rx_packet *rx_buffers; + + struct statistic fw_pend_stat; + struct list_head fw_pend_list; + + struct statistic msg_free_stat; + struct statistic msg_pend_stat; + struct list_head msg_free_list; + struct list_head msg_pend_list; + struct ipw2100_tx_packet *msg_buffers; + + struct statistic tx_free_stat; + struct statistic tx_pend_stat; + struct list_head tx_free_list; + struct list_head tx_pend_list; + struct ipw2100_tx_packet *tx_buffers; + + struct ipw2100_ordinals ordinals; + + struct pci_dev *pci_dev; + + struct proc_dir_entry *dir_dev; + + struct net_device *net_dev; + struct iw_statistics wstats; + + struct tasklet_struct irq_tasklet; + + struct workqueue_struct *workqueue; + struct work_struct reset_work; + struct work_struct security_work; + struct work_struct wx_event_work; + struct work_struct hang_check; + struct work_struct rf_kill; + + u32 interrupts; + int tx_interrupts; + int rx_interrupts; + int inta_other; + + spinlock_t low_lock; + struct semaphore action_sem; + struct semaphore adapter_sem; + + wait_queue_head_t wait_command_queue; +}; + + +/********************************************************* + * Host Command -> From Driver to FW + *********************************************************/ + +/** + * Host command identifiers + */ +#define HOST_COMPLETE 2 +#define SYSTEM_CONFIG 6 +#define SSID 8 +#define MANDATORY_BSSID 9 +#define AUTHENTICATION_TYPE 10 +#define ADAPTER_ADDRESS 11 +#define PORT_TYPE 12 +#define INTERNATIONAL_MODE 13 +#define CHANNEL 14 +#define RTS_THRESHOLD 15 +#define FRAG_THRESHOLD 16 +#define POWER_MODE 17 +#define TX_RATES 18 +#define BASIC_TX_RATES 19 +#define WEP_KEY_INFO 20 +#define WEP_KEY_INDEX 25 +#define WEP_FLAGS 26 +#define ADD_MULTICAST 27 +#define CLEAR_ALL_MULTICAST 28 +#define BEACON_INTERVAL 29 +#define ATIM_WINDOW 30 +#define CLEAR_STATISTICS 31 +#define SEND 33 +#define TX_POWER_INDEX 36 +#define BROADCAST_SCAN 43 +#define CARD_DISABLE 44 +#define PREFERRED_BSSID 45 +#define SET_SCAN_OPTIONS 46 +#define SCAN_DWELL_TIME 47 +#define SWEEP_TABLE 48 +#define AP_OR_STATION_TABLE 49 +#define GROUP_ORDINALS 50 +#define SHORT_RETRY_LIMIT 51 +#define LONG_RETRY_LIMIT 52 + +#define HOST_PRE_POWER_DOWN 58 +#define CARD_DISABLE_PHY_OFF 61 +#define MSDU_TX_RATES 62 + + +/* Rogue AP Detection */ +#define SET_STATION_STAT_BITS 64 +#define CLEAR_STATIONS_STAT_BITS 65 +#define LEAP_ROGUE_MODE 66 //TODO tbw replaced by CFG_LEAP_ROGUE_AP +#define SET_SECURITY_INFORMATION 67 +#define DISASSOCIATION_BSSID 68 +#define SET_WPA_IE 69 + + + +/* system configuration bit mask: */ +#define IPW_CFG_MONITOR 0x00004 +#define IPW_CFG_PREAMBLE_AUTO 0x00010 +#define IPW_CFG_IBSS_AUTO_START 0x00020 +#define IPW_CFG_LOOPBACK 0x00100 +#define IPW_CFG_ANSWER_BCSSID_PROBE 0x00800 +#define IPW_CFG_BT_SIDEBAND_SIGNAL 0x02000 +#define IPW_CFG_802_1x_ENABLE 0x04000 +#define IPW_CFG_BSS_MASK 0x08000 +#define IPW_CFG_IBSS_MASK 0x10000 + +#define IPW_SCAN_NOASSOCIATE (1<<0) +#define IPW_SCAN_MIXED_CELL (1<<1) +/* RESERVED (1<<2) */ +#define IPW_SCAN_PASSIVE (1<<3) + +#define IPW_NIC_FATAL_ERROR 0x2A7F0 +#define IPW_ERROR_ADDR(x) (x & 0x3FFFF) +#define IPW_ERROR_CODE(x) ((x & 0xFF000000) >> 24) +#define IPW2100_ERR_C3_CORRUPTION (0x10 << 24) +#define IPW2100_ERR_MSG_TIMEOUT (0x11 << 24) +#define IPW2100_ERR_FW_LOAD (0x12 << 24) + +#define IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND 0x200 +#define IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0D80 + +#define IPW_MEM_HOST_SHARED_RX_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x40) +#define IPW_MEM_HOST_SHARED_RX_STATUS_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x44) +#define IPW_MEM_HOST_SHARED_RX_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x48) +#define IPW_MEM_HOST_SHARED_RX_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0xa0) + +#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x00) +#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x04) +#define IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x80) + +#define IPW_MEM_HOST_SHARED_RX_WRITE_INDEX \ + (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x20) + +#define IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX \ + (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND) + +#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1 (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x180) +#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2 (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x184) + +#define IPW2100_INTA_TX_TRANSFER (0x00000001) // Bit 0 (LSB) +#define IPW2100_INTA_RX_TRANSFER (0x00000002) // Bit 1 +#define IPW2100_INTA_TX_COMPLETE (0x00000004) // Bit 2 +#define IPW2100_INTA_EVENT_INTERRUPT (0x00000008) // Bit 3 +#define IPW2100_INTA_STATUS_CHANGE (0x00000010) // Bit 4 +#define IPW2100_INTA_BEACON_PERIOD_EXPIRED (0x00000020) // Bit 5 +#define IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE (0x00010000) // Bit 16 +#define IPW2100_INTA_FW_INIT_DONE (0x01000000) // Bit 24 +#define IPW2100_INTA_FW_CALIBRATION_CALC (0x02000000) // Bit 25 +#define IPW2100_INTA_FATAL_ERROR (0x40000000) // Bit 30 +#define IPW2100_INTA_PARITY_ERROR (0x80000000) // Bit 31 (MSB) + +#define IPW_AUX_HOST_RESET_REG_PRINCETON_RESET (0x00000001) +#define IPW_AUX_HOST_RESET_REG_FORCE_NMI (0x00000002) +#define IPW_AUX_HOST_RESET_REG_PCI_HOST_CLUSTER_FATAL_NMI (0x00000004) +#define IPW_AUX_HOST_RESET_REG_CORE_FATAL_NMI (0x00000008) +#define IPW_AUX_HOST_RESET_REG_SW_RESET (0x00000080) +#define IPW_AUX_HOST_RESET_REG_MASTER_DISABLED (0x00000100) +#define IPW_AUX_HOST_RESET_REG_STOP_MASTER (0x00000200) + +#define IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY (0x00000001) // Bit 0 (LSB) +#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY (0x00000002) // Bit 1 +#define IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE (0x00000004) // Bit 2 +#define IPW_AUX_HOST_GP_CNTRL_BITS_SYS_CONFIG (0x000007c0) // Bits 6-10 +#define IPW_AUX_HOST_GP_CNTRL_BIT_BUS_TYPE (0x00000200) // Bit 9 +#define IPW_AUX_HOST_GP_CNTRL_BIT_BAR0_BLOCK_SIZE (0x00000400) // Bit 10 +#define IPW_AUX_HOST_GP_CNTRL_BIT_USB_MODE (0x20000000) // Bit 29 +#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_FORCES_SYS_CLK (0x40000000) // Bit 30 +#define IPW_AUX_HOST_GP_CNTRL_BIT_FW_FORCES_SYS_CLK (0x80000000) // Bit 31 (MSB) + +#define IPW_BIT_GPIO_GPIO1_MASK 0x0000000C +#define IPW_BIT_GPIO_GPIO3_MASK 0x000000C0 +#define IPW_BIT_GPIO_GPIO1_ENABLE 0x00000008 +#define IPW_BIT_GPIO_RF_KILL 0x00010000 + +#define IPW_BIT_GPIO_LED_OFF 0x00002000 // Bit 13 = 1 + +#define IPW_REG_DOMAIN_0_OFFSET 0x0000 +#define IPW_REG_DOMAIN_1_OFFSET IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + +#define IPW_REG_INTA IPW_REG_DOMAIN_0_OFFSET + 0x0008 +#define IPW_REG_INTA_MASK IPW_REG_DOMAIN_0_OFFSET + 0x000C +#define IPW_REG_INDIRECT_ACCESS_ADDRESS IPW_REG_DOMAIN_0_OFFSET + 0x0010 +#define IPW_REG_INDIRECT_ACCESS_DATA IPW_REG_DOMAIN_0_OFFSET + 0x0014 +#define IPW_REG_AUTOINCREMENT_ADDRESS IPW_REG_DOMAIN_0_OFFSET + 0x0018 +#define IPW_REG_AUTOINCREMENT_DATA IPW_REG_DOMAIN_0_OFFSET + 0x001C +#define IPW_REG_RESET_REG IPW_REG_DOMAIN_0_OFFSET + 0x0020 +#define IPW_REG_GP_CNTRL IPW_REG_DOMAIN_0_OFFSET + 0x0024 +#define IPW_REG_GPIO IPW_REG_DOMAIN_0_OFFSET + 0x0030 +#define IPW_REG_FW_TYPE IPW_REG_DOMAIN_1_OFFSET + 0x0188 +#define IPW_REG_FW_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x018C +#define IPW_REG_FW_COMPATABILITY_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x0190 + +#define IPW_REG_INDIRECT_ADDR_MASK 0x00FFFFFC + +#define IPW_INTERRUPT_MASK 0xC1010013 + +#define IPW2100_CONTROL_REG 0x220000 +#define IPW2100_CONTROL_PHY_OFF 0x8 + +#define IPW2100_COMMAND 0x00300004 +#define IPW2100_COMMAND_PHY_ON 0x0 +#define IPW2100_COMMAND_PHY_OFF 0x1 + +/* in DEBUG_AREA, values of memory always 0xd55555d5 */ +#define IPW_REG_DOA_DEBUG_AREA_START IPW_REG_DOMAIN_0_OFFSET + 0x0090 +#define IPW_REG_DOA_DEBUG_AREA_END IPW_REG_DOMAIN_0_OFFSET + 0x00FF +#define IPW_DATA_DOA_DEBUG_VALUE 0xd55555d5 + +#define IPW_INTERNAL_REGISTER_HALT_AND_RESET 0x003000e0 + +#define IPW_WAIT_CLOCK_STABILIZATION_DELAY 50 // micro seconds +#define IPW_WAIT_RESET_ARC_COMPLETE_DELAY 10 // micro seconds +#define IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY 10 // micro seconds + +// BD ring queue read/write difference +#define IPW_BD_QUEUE_W_R_MIN_SPARE 2 + +#define IPW_CACHE_LINE_LENGTH_DEFAULT 0x80 + +#define IPW_CARD_DISABLE_PHY_OFF_COMPLETE_WAIT 100 // 100 milli +#define IPW_PREPARE_POWER_DOWN_COMPLETE_WAIT 100 // 100 milli + + + + +#define IPW_HEADER_802_11_SIZE sizeof(struct ieee80211_hdr_3addr) +#define IPW_MAX_80211_PAYLOAD_SIZE 2304U +#define IPW_MAX_802_11_PAYLOAD_LENGTH 2312 +#define IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH 1536 +#define IPW_MIN_ACCEPTABLE_RX_FRAME_LENGTH 60 +#define IPW_MAX_ACCEPTABLE_RX_FRAME_LENGTH \ + (IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH + IPW_HEADER_802_11_SIZE - \ + sizeof(struct ethhdr)) + +#define IPW_802_11_FCS_LENGTH 4 +#define IPW_RX_NIC_BUFFER_LENGTH \ + (IPW_MAX_802_11_PAYLOAD_LENGTH + IPW_HEADER_802_11_SIZE + \ + IPW_802_11_FCS_LENGTH) + +#define IPW_802_11_PAYLOAD_OFFSET \ + (sizeof(struct ieee80211_hdr_3addr) + \ + sizeof(struct ieee80211_snap_hdr)) + +struct ipw2100_rx { + union { + unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH]; + struct ieee80211_hdr header; + u32 status; + struct ipw2100_notification notification; + struct ipw2100_cmd_header command; + } rx_data; +} __attribute__ ((packed)); + +/* Bit 0-7 are for 802.11b tx rates - . Bit 5-7 are reserved */ +#define TX_RATE_1_MBIT 0x0001 +#define TX_RATE_2_MBIT 0x0002 +#define TX_RATE_5_5_MBIT 0x0004 +#define TX_RATE_11_MBIT 0x0008 +#define TX_RATE_MASK 0x000F +#define DEFAULT_TX_RATES 0x000F + +#define IPW_POWER_MODE_CAM 0x00 //(always on) +#define IPW_POWER_INDEX_1 0x01 +#define IPW_POWER_INDEX_2 0x02 +#define IPW_POWER_INDEX_3 0x03 +#define IPW_POWER_INDEX_4 0x04 +#define IPW_POWER_INDEX_5 0x05 +#define IPW_POWER_AUTO 0x06 +#define IPW_POWER_MASK 0x0F +#define IPW_POWER_ENABLED 0x10 +#define IPW_POWER_LEVEL(x) ((x) & IPW_POWER_MASK) + +#define IPW_TX_POWER_AUTO 0 +#define IPW_TX_POWER_ENHANCED 1 + +#define IPW_TX_POWER_DEFAULT 32 +#define IPW_TX_POWER_MIN 0 +#define IPW_TX_POWER_MAX 16 +#define IPW_TX_POWER_MIN_DBM (-12) +#define IPW_TX_POWER_MAX_DBM 16 + +#define FW_SCAN_DONOT_ASSOCIATE 0x0001 // Dont Attempt to Associate after Scan +#define FW_SCAN_PASSIVE 0x0008 // Force PASSSIVE Scan + +#define REG_MIN_CHANNEL 0 +#define REG_MAX_CHANNEL 14 + +#define REG_CHANNEL_MASK 0x00003FFF +#define IPW_IBSS_11B_DEFAULT_MASK 0x87ff + +#define DIVERSITY_EITHER 0 // Use both antennas +#define DIVERSITY_ANTENNA_A 1 // Use antenna A +#define DIVERSITY_ANTENNA_B 2 // Use antenna B + + +#define HOST_COMMAND_WAIT 0 +#define HOST_COMMAND_NO_WAIT 1 + +#define LOCK_NONE 0 +#define LOCK_DRIVER 1 +#define LOCK_FW 2 + +#define TYPE_SWEEP_ORD 0x000D +#define TYPE_IBSS_STTN_ORD 0x000E +#define TYPE_BSS_AP_ORD 0x000F +#define TYPE_RAW_BEACON_ENTRY 0x0010 +#define TYPE_CALIBRATION_DATA 0x0011 +#define TYPE_ROGUE_AP_DATA 0x0012 +#define TYPE_ASSOCIATION_REQUEST 0x0013 +#define TYPE_REASSOCIATION_REQUEST 0x0014 + + +#define HW_FEATURE_RFKILL (0x0001) +#define RF_KILLSWITCH_OFF (1) +#define RF_KILLSWITCH_ON (0) + +#define IPW_COMMAND_POOL_SIZE 40 + +#define IPW_START_ORD_TAB_1 1 +#define IPW_START_ORD_TAB_2 1000 + +#define IPW_ORD_TAB_1_ENTRY_SIZE sizeof(u32) + +#define IS_ORDINAL_TABLE_ONE(mgr,id) \ + ((id >= IPW_START_ORD_TAB_1) && (id < mgr->table1_size)) +#define IS_ORDINAL_TABLE_TWO(mgr,id) \ + ((id >= IPW_START_ORD_TAB_2) && (id < (mgr->table2_size + IPW_START_ORD_TAB_2))) + +#define BSS_ID_LENGTH 6 + +// Fixed size data: Ordinal Table 1 +typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW +// Transmit statistics + IPW_ORD_STAT_TX_HOST_REQUESTS = 1,// # of requested Host Tx's (MSDU) + IPW_ORD_STAT_TX_HOST_COMPLETE, // # of successful Host Tx's (MSDU) + IPW_ORD_STAT_TX_DIR_DATA, // # of successful Directed Tx's (MSDU) + + IPW_ORD_STAT_TX_DIR_DATA1 = 4, // # of successful Directed Tx's (MSDU) @ 1MB + IPW_ORD_STAT_TX_DIR_DATA2, // # of successful Directed Tx's (MSDU) @ 2MB + IPW_ORD_STAT_TX_DIR_DATA5_5, // # of successful Directed Tx's (MSDU) @ 5_5MB + IPW_ORD_STAT_TX_DIR_DATA11, // # of successful Directed Tx's (MSDU) @ 11MB + IPW_ORD_STAT_TX_DIR_DATA22, // # of successful Directed Tx's (MSDU) @ 22MB + + IPW_ORD_STAT_TX_NODIR_DATA1 = 13,// # of successful Non_Directed Tx's (MSDU) @ 1MB + IPW_ORD_STAT_TX_NODIR_DATA2, // # of successful Non_Directed Tx's (MSDU) @ 2MB + IPW_ORD_STAT_TX_NODIR_DATA5_5, // # of successful Non_Directed Tx's (MSDU) @ 5.5MB + IPW_ORD_STAT_TX_NODIR_DATA11, // # of successful Non_Directed Tx's (MSDU) @ 11MB + + IPW_ORD_STAT_NULL_DATA = 21, // # of successful NULL data Tx's + IPW_ORD_STAT_TX_RTS, // # of successful Tx RTS + IPW_ORD_STAT_TX_CTS, // # of successful Tx CTS + IPW_ORD_STAT_TX_ACK, // # of successful Tx ACK + IPW_ORD_STAT_TX_ASSN, // # of successful Association Tx's + IPW_ORD_STAT_TX_ASSN_RESP, // # of successful Association response Tx's + IPW_ORD_STAT_TX_REASSN, // # of successful Reassociation Tx's + IPW_ORD_STAT_TX_REASSN_RESP, // # of successful Reassociation response Tx's + IPW_ORD_STAT_TX_PROBE, // # of probes successfully transmitted + IPW_ORD_STAT_TX_PROBE_RESP, // # of probe responses successfully transmitted + IPW_ORD_STAT_TX_BEACON, // # of tx beacon + IPW_ORD_STAT_TX_ATIM, // # of Tx ATIM + IPW_ORD_STAT_TX_DISASSN, // # of successful Disassociation TX + IPW_ORD_STAT_TX_AUTH, // # of successful Authentication Tx + IPW_ORD_STAT_TX_DEAUTH, // # of successful Deauthentication TX + + IPW_ORD_STAT_TX_TOTAL_BYTES = 41,// Total successful Tx data bytes + IPW_ORD_STAT_TX_RETRIES, // # of Tx retries + IPW_ORD_STAT_TX_RETRY1, // # of Tx retries at 1MBPS + IPW_ORD_STAT_TX_RETRY2, // # of Tx retries at 2MBPS + IPW_ORD_STAT_TX_RETRY5_5, // # of Tx retries at 5.5MBPS + IPW_ORD_STAT_TX_RETRY11, // # of Tx retries at 11MBPS + + IPW_ORD_STAT_TX_FAILURES = 51, // # of Tx Failures + IPW_ORD_STAT_TX_ABORT_AT_HOP, //NS // # of Tx's aborted at hop time + IPW_ORD_STAT_TX_MAX_TRIES_IN_HOP,// # of times max tries in a hop failed + IPW_ORD_STAT_TX_ABORT_LATE_DMA, //NS // # of times tx aborted due to late dma setup + IPW_ORD_STAT_TX_ABORT_STX, //NS // # of times backoff aborted + IPW_ORD_STAT_TX_DISASSN_FAIL, // # of times disassociation failed + IPW_ORD_STAT_TX_ERR_CTS, // # of missed/bad CTS frames + IPW_ORD_STAT_TX_BPDU, //NS // # of spanning tree BPDUs sent + IPW_ORD_STAT_TX_ERR_ACK, // # of tx err due to acks + + // Receive statistics + IPW_ORD_STAT_RX_HOST = 61, // # of packets passed to host + IPW_ORD_STAT_RX_DIR_DATA, // # of directed packets + IPW_ORD_STAT_RX_DIR_DATA1, // # of directed packets at 1MB + IPW_ORD_STAT_RX_DIR_DATA2, // # of directed packets at 2MB + IPW_ORD_STAT_RX_DIR_DATA5_5, // # of directed packets at 5.5MB + IPW_ORD_STAT_RX_DIR_DATA11, // # of directed packets at 11MB + IPW_ORD_STAT_RX_DIR_DATA22, // # of directed packets at 22MB + + IPW_ORD_STAT_RX_NODIR_DATA = 71,// # of nondirected packets + IPW_ORD_STAT_RX_NODIR_DATA1, // # of nondirected packets at 1MB + IPW_ORD_STAT_RX_NODIR_DATA2, // # of nondirected packets at 2MB + IPW_ORD_STAT_RX_NODIR_DATA5_5, // # of nondirected packets at 5.5MB + IPW_ORD_STAT_RX_NODIR_DATA11, // # of nondirected packets at 11MB + + IPW_ORD_STAT_RX_NULL_DATA = 80, // # of null data rx's + IPW_ORD_STAT_RX_POLL, //NS // # of poll rx + IPW_ORD_STAT_RX_RTS, // # of Rx RTS + IPW_ORD_STAT_RX_CTS, // # of Rx CTS + IPW_ORD_STAT_RX_ACK, // # of Rx ACK + IPW_ORD_STAT_RX_CFEND, // # of Rx CF End + IPW_ORD_STAT_RX_CFEND_ACK, // # of Rx CF End + CF Ack + IPW_ORD_STAT_RX_ASSN, // # of Association Rx's + IPW_ORD_STAT_RX_ASSN_RESP, // # of Association response Rx's + IPW_ORD_STAT_RX_REASSN, // # of Reassociation Rx's + IPW_ORD_STAT_RX_REASSN_RESP, // # of Reassociation response Rx's + IPW_ORD_STAT_RX_PROBE, // # of probe Rx's + IPW_ORD_STAT_RX_PROBE_RESP, // # of probe response Rx's + IPW_ORD_STAT_RX_BEACON, // # of Rx beacon + IPW_ORD_STAT_RX_ATIM, // # of Rx ATIM + IPW_ORD_STAT_RX_DISASSN, // # of disassociation Rx + IPW_ORD_STAT_RX_AUTH, // # of authentication Rx + IPW_ORD_STAT_RX_DEAUTH, // # of deauthentication Rx + + IPW_ORD_STAT_RX_TOTAL_BYTES = 101,// Total rx data bytes received + IPW_ORD_STAT_RX_ERR_CRC, // # of packets with Rx CRC error + IPW_ORD_STAT_RX_ERR_CRC1, // # of Rx CRC errors at 1MB + IPW_ORD_STAT_RX_ERR_CRC2, // # of Rx CRC errors at 2MB + IPW_ORD_STAT_RX_ERR_CRC5_5, // # of Rx CRC errors at 5.5MB + IPW_ORD_STAT_RX_ERR_CRC11, // # of Rx CRC errors at 11MB + + IPW_ORD_STAT_RX_DUPLICATE1 = 112, // # of duplicate rx packets at 1MB + IPW_ORD_STAT_RX_DUPLICATE2, // # of duplicate rx packets at 2MB + IPW_ORD_STAT_RX_DUPLICATE5_5, // # of duplicate rx packets at 5.5MB + IPW_ORD_STAT_RX_DUPLICATE11, // # of duplicate rx packets at 11MB + IPW_ORD_STAT_RX_DUPLICATE = 119, // # of duplicate rx packets + + IPW_ORD_PERS_DB_LOCK = 120, // # locking fw permanent db + IPW_ORD_PERS_DB_SIZE, // # size of fw permanent db + IPW_ORD_PERS_DB_ADDR, // # address of fw permanent db + IPW_ORD_STAT_RX_INVALID_PROTOCOL, // # of rx frames with invalid protocol + IPW_ORD_SYS_BOOT_TIME, // # Boot time + IPW_ORD_STAT_RX_NO_BUFFER, // # of rx frames rejected due to no buffer + IPW_ORD_STAT_RX_ABORT_LATE_DMA, //NS // # of rx frames rejected due to dma setup too late + IPW_ORD_STAT_RX_ABORT_AT_HOP, //NS // # of rx frames aborted due to hop + IPW_ORD_STAT_RX_MISSING_FRAG, // # of rx frames dropped due to missing fragment + IPW_ORD_STAT_RX_ORPHAN_FRAG, // # of rx frames dropped due to non-sequential fragment + IPW_ORD_STAT_RX_ORPHAN_FRAME, // # of rx frames dropped due to unmatched 1st frame + IPW_ORD_STAT_RX_FRAG_AGEOUT, // # of rx frames dropped due to uncompleted frame + IPW_ORD_STAT_RX_BAD_SSID, //NS // Bad SSID (unused) + IPW_ORD_STAT_RX_ICV_ERRORS, // # of ICV errors during decryption + +// PSP Statistics + IPW_ORD_STAT_PSP_SUSPENSION = 137,// # of times adapter suspended + IPW_ORD_STAT_PSP_BCN_TIMEOUT, // # of beacon timeout + IPW_ORD_STAT_PSP_POLL_TIMEOUT, // # of poll response timeouts + IPW_ORD_STAT_PSP_NONDIR_TIMEOUT,// # of timeouts waiting for last broadcast/muticast pkt + IPW_ORD_STAT_PSP_RX_DTIMS, // # of PSP DTIMs received + IPW_ORD_STAT_PSP_RX_TIMS, // # of PSP TIMs received + IPW_ORD_STAT_PSP_STATION_ID, // PSP Station ID + +// Association and roaming + IPW_ORD_LAST_ASSN_TIME = 147, // RTC time of last association + IPW_ORD_STAT_PERCENT_MISSED_BCNS,// current calculation of % missed beacons + IPW_ORD_STAT_PERCENT_RETRIES, // current calculation of % missed tx retries + IPW_ORD_ASSOCIATED_AP_PTR, // If associated, this is ptr to the associated + // AP table entry. set to 0 if not associated + IPW_ORD_AVAILABLE_AP_CNT, // # of AP's decsribed in the AP table + IPW_ORD_AP_LIST_PTR, // Ptr to list of available APs + IPW_ORD_STAT_AP_ASSNS, // # of associations + IPW_ORD_STAT_ASSN_FAIL, // # of association failures + IPW_ORD_STAT_ASSN_RESP_FAIL, // # of failuresdue to response fail + IPW_ORD_STAT_FULL_SCANS, // # of full scans + + IPW_ORD_CARD_DISABLED, // # Card Disabled + IPW_ORD_STAT_ROAM_INHIBIT, // # of times roaming was inhibited due to ongoing activity + IPW_FILLER_40, + IPW_ORD_RSSI_AT_ASSN = 160, // RSSI of associated AP at time of association + IPW_ORD_STAT_ASSN_CAUSE1, // # of reassociations due to no tx from AP in last N + // hops or no prob_ responses in last 3 minutes + IPW_ORD_STAT_ASSN_CAUSE2, // # of reassociations due to poor tx/rx quality + IPW_ORD_STAT_ASSN_CAUSE3, // # of reassociations due to tx/rx quality with excessive + // load at the AP + IPW_ORD_STAT_ASSN_CAUSE4, // # of reassociations due to AP RSSI level fell below + // eligible group + IPW_ORD_STAT_ASSN_CAUSE5, // # of reassociations due to load leveling + IPW_ORD_STAT_ASSN_CAUSE6, //NS // # of reassociations due to dropped by Ap + IPW_FILLER_41, + IPW_FILLER_42, + IPW_FILLER_43, + IPW_ORD_STAT_AUTH_FAIL, // # of times authentication failed + IPW_ORD_STAT_AUTH_RESP_FAIL, // # of times authentication response failed + IPW_ORD_STATION_TABLE_CNT, // # of entries in association table + +// Other statistics + IPW_ORD_RSSI_AVG_CURR = 173, // Current avg RSSI + IPW_ORD_STEST_RESULTS_CURR, //NS // Current self test results word + IPW_ORD_STEST_RESULTS_CUM, //NS // Cummulative self test results word + IPW_ORD_SELF_TEST_STATUS, //NS // + IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP + IPW_ORD_POWER_MGMT_INDEX, //NS // + IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon + IPW_ORD_COUNTRY_CHANNELS, // channels suported by country +// IPW_ORD_COUNTRY_CHANNELS: +// For 11b the lower 2-byte are used for channels from 1-14 +// and the higher 2-byte are not used. + IPW_ORD_RESET_CNT, // # of adapter resets (warm) + IPW_ORD_BEACON_INTERVAL, // Beacon interval + + IPW_ORD_PRINCETON_VERSION = 184, //NS // Princeton Version + IPW_ORD_ANTENNA_DIVERSITY, // TRUE if antenna diversity is disabled + IPW_ORD_CCA_RSSI, //NS // CCA RSSI value (factory programmed) + IPW_ORD_STAT_EEPROM_UPDATE, //NS // # of times config EEPROM updated + IPW_ORD_DTIM_PERIOD, // # of beacon intervals between DTIMs + IPW_ORD_OUR_FREQ, // current radio freq lower digits - channel ID + + IPW_ORD_RTC_TIME = 190, // current RTC time + IPW_ORD_PORT_TYPE, // operating mode + IPW_ORD_CURRENT_TX_RATE, // current tx rate + IPW_ORD_SUPPORTED_RATES, // Bitmap of supported tx rates + IPW_ORD_ATIM_WINDOW, // current ATIM Window + IPW_ORD_BASIC_RATES, // bitmap of basic tx rates + IPW_ORD_NIC_HIGHEST_RATE, // bitmap of basic tx rates + IPW_ORD_AP_HIGHEST_RATE, // bitmap of basic tx rates + IPW_ORD_CAPABILITIES, // Management frame capability field + IPW_ORD_AUTH_TYPE, // Type of authentication + IPW_ORD_RADIO_TYPE, // Adapter card platform type + IPW_ORD_RTS_THRESHOLD = 201, // Min length of packet after which RTS handshaking is used + IPW_ORD_INT_MODE, // International mode + IPW_ORD_FRAGMENTATION_THRESHOLD, // protocol frag threshold + IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, // EEPROM offset in SRAM + IPW_ORD_EEPROM_SRAM_DB_BLOCK_SIZE, // EEPROM size in SRAM + IPW_ORD_EEPROM_SKU_CAPABILITY, // EEPROM SKU Capability 206 = + IPW_ORD_EEPROM_IBSS_11B_CHANNELS, // EEPROM IBSS 11b channel set + + IPW_ORD_MAC_VERSION = 209, // MAC Version + IPW_ORD_MAC_REVISION, // MAC Revision + IPW_ORD_RADIO_VERSION, // Radio Version + IPW_ORD_NIC_MANF_DATE_TIME, // MANF Date/Time STAMP + IPW_ORD_UCODE_VERSION, // Ucode Version + IPW_ORD_HW_RF_SWITCH_STATE = 214, // HW RF Kill Switch State +} ORDINALTABLE1; + +// ordinal table 2 +// Variable length data: +#define IPW_FIRST_VARIABLE_LENGTH_ORDINAL 1001 + +typedef enum _ORDINAL_TABLE_2 { // NS - means Not Supported by FW + IPW_ORD_STAT_BASE = 1000, // contains number of variable ORDs + IPW_ORD_STAT_ADAPTER_MAC = 1001, // 6 bytes: our adapter MAC address + IPW_ORD_STAT_PREFERRED_BSSID = 1002, // 6 bytes: BSSID of the preferred AP + IPW_ORD_STAT_MANDATORY_BSSID = 1003, // 6 bytes: BSSID of the mandatory AP + IPW_FILL_1, //NS // + IPW_ORD_STAT_COUNTRY_TEXT = 1005, // 36 bytes: Country name text, First two bytes are Country code + IPW_ORD_STAT_ASSN_SSID = 1006, // 32 bytes: ESSID String + IPW_ORD_STATION_TABLE = 1007, // ? bytes: Station/AP table (via Direct SSID Scans) + IPW_ORD_STAT_SWEEP_TABLE = 1008, // ? bytes: Sweep/Host Table table (via Broadcast Scans) + IPW_ORD_STAT_ROAM_LOG = 1009, // ? bytes: Roaming log + IPW_ORD_STAT_RATE_LOG = 1010, //NS // 0 bytes: Rate log + IPW_ORD_STAT_FIFO = 1011, //NS // 0 bytes: Fifo buffer data structures + IPW_ORD_STAT_FW_VER_NUM = 1012, // 14 bytes: fw version ID string as in (a.bb.ccc; "0.08.011") + IPW_ORD_STAT_FW_DATE = 1013, // 14 bytes: fw date string (mmm dd yyyy; "Mar 13 2002") + IPW_ORD_STAT_ASSN_AP_BSSID = 1014, // 6 bytes: MAC address of associated AP + IPW_ORD_STAT_DEBUG = 1015, //NS // ? bytes: + IPW_ORD_STAT_NIC_BPA_NUM = 1016, // 11 bytes: NIC BPA number in ASCII + IPW_ORD_STAT_UCODE_DATE = 1017, // 5 bytes: uCode date + IPW_ORD_SECURITY_NGOTIATION_RESULT = 1018, +} ORDINALTABLE2; // NS - means Not Supported by FW + +#define IPW_LAST_VARIABLE_LENGTH_ORDINAL 1018 + +#ifndef WIRELESS_SPY +#define WIRELESS_SPY // enable iwspy support +#endif + +#define IPW_HOST_FW_SHARED_AREA0 0x0002f200 +#define IPW_HOST_FW_SHARED_AREA0_END 0x0002f510 // 0x310 bytes + +#define IPW_HOST_FW_SHARED_AREA1 0x0002f610 +#define IPW_HOST_FW_SHARED_AREA1_END 0x0002f630 // 0x20 bytes + +#define IPW_HOST_FW_SHARED_AREA2 0x0002fa00 +#define IPW_HOST_FW_SHARED_AREA2_END 0x0002fa20 // 0x20 bytes + +#define IPW_HOST_FW_SHARED_AREA3 0x0002fc00 +#define IPW_HOST_FW_SHARED_AREA3_END 0x0002fc10 // 0x10 bytes + +#define IPW_HOST_FW_INTERRUPT_AREA 0x0002ff80 +#define IPW_HOST_FW_INTERRUPT_AREA_END 0x00030000 // 0x80 bytes + +struct ipw2100_fw_chunk { + unsigned char *buf; + long len; + long pos; + struct list_head list; +}; + +struct ipw2100_fw_chunk_set { + const void *data; + unsigned long size; +}; + +struct ipw2100_fw { + int version; + struct ipw2100_fw_chunk_set fw; + struct ipw2100_fw_chunk_set uc; + const struct firmware *fw_entry; +}; + +#define MAX_FW_VERSION_LEN 14 + +#endif /* _IPW2100_H */ diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c new file mode 100644 index 00000000000..b7f275c00de --- /dev/null +++ b/drivers/net/wireless/ipw2200.c @@ -0,0 +1,7383 @@ +/****************************************************************************** + + Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved. + + 802.11 status code portion of this file from ethereal-0.10.6: + Copyright 2000, Axis Communications AB + Ethereal - Network traffic analyzer + By Gerald Combs <gerald@ethereal.com> + Copyright 1998 Gerald Combs + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ + +#include "ipw2200.h" + +#define IPW2200_VERSION "1.0.0" +#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2200/2915 Network Driver" +#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation" +#define DRV_VERSION IPW2200_VERSION + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); + +static int debug = 0; +static int channel = 0; +static char *ifname; +static int mode = 0; + +static u32 ipw_debug_level; +static int associate = 1; +static int auto_create = 1; +static int disable = 0; +static const char ipw_modes[] = { + 'a', 'b', 'g', '?' +}; + +static void ipw_rx(struct ipw_priv *priv); +static int ipw_queue_tx_reclaim(struct ipw_priv *priv, + struct clx2_tx_queue *txq, int qindex); +static int ipw_queue_reset(struct ipw_priv *priv); + +static int ipw_queue_tx_hcmd(struct ipw_priv *priv, int hcmd, void *buf, + int len, int sync); + +static void ipw_tx_queue_free(struct ipw_priv *); + +static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *); +static void ipw_rx_queue_free(struct ipw_priv *, struct ipw_rx_queue *); +static void ipw_rx_queue_replenish(void *); + +static int ipw_up(struct ipw_priv *); +static void ipw_down(struct ipw_priv *); +static int ipw_config(struct ipw_priv *); +static int init_supported_rates(struct ipw_priv *priv, + struct ipw_supported_rates *prates); + +static u8 band_b_active_channel[MAX_B_CHANNELS] = { + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 0 +}; +static u8 band_a_active_channel[MAX_A_CHANNELS] = { + 36, 40, 44, 48, 149, 153, 157, 161, 165, 52, 56, 60, 64, 0 +}; + +static int is_valid_channel(int mode_mask, int channel) +{ + int i; + + if (!channel) + return 0; + + if (mode_mask & IEEE_A) + for (i = 0; i < MAX_A_CHANNELS; i++) + if (band_a_active_channel[i] == channel) + return IEEE_A; + + if (mode_mask & (IEEE_B | IEEE_G)) + for (i = 0; i < MAX_B_CHANNELS; i++) + if (band_b_active_channel[i] == channel) + return mode_mask & (IEEE_B | IEEE_G); + + return 0; +} + +static char *snprint_line(char *buf, size_t count, + const u8 * data, u32 len, u32 ofs) +{ + int out, i, j, l; + char c; + + out = snprintf(buf, count, "%08X", ofs); + + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) + out += snprintf(buf + out, count - out, "%02X ", + data[(i * 8 + j)]); + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + out += snprintf(buf + out, count - out, " "); + for (l = 0, i = 0; i < 2; i++) { + out += snprintf(buf + out, count - out, " "); + for (j = 0; j < 8 && l < len; j++, l++) { + c = data[(i * 8 + j)]; + if (!isascii(c) || !isprint(c)) + c = '.'; + + out += snprintf(buf + out, count - out, "%c", c); + } + + for (; j < 8; j++) + out += snprintf(buf + out, count - out, " "); + } + + return buf; +} + +static void printk_buf(int level, const u8 * data, u32 len) +{ + char line[81]; + u32 ofs = 0; + if (!(ipw_debug_level & level)) + return; + + while (len) { + printk(KERN_DEBUG "%s\n", + snprint_line(line, sizeof(line), &data[ofs], + min(len, 16U), ofs)); + ofs += 16; + len -= min(len, 16U); + } +} + +static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg); +#define ipw_read_reg32(a, b) _ipw_read_reg32(a, b) + +static u8 _ipw_read_reg8(struct ipw_priv *ipw, u32 reg); +#define ipw_read_reg8(a, b) _ipw_read_reg8(a, b) + +static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value); +static inline void ipw_write_reg8(struct ipw_priv *a, u32 b, u8 c) +{ + IPW_DEBUG_IO("%s %d: write_indirect8(0x%08X, 0x%08X)\n", __FILE__, + __LINE__, (u32) (b), (u32) (c)); + _ipw_write_reg8(a, b, c); +} + +static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg, u16 value); +static inline void ipw_write_reg16(struct ipw_priv *a, u32 b, u16 c) +{ + IPW_DEBUG_IO("%s %d: write_indirect16(0x%08X, 0x%08X)\n", __FILE__, + __LINE__, (u32) (b), (u32) (c)); + _ipw_write_reg16(a, b, c); +} + +static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg, u32 value); +static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c) +{ + IPW_DEBUG_IO("%s %d: write_indirect32(0x%08X, 0x%08X)\n", __FILE__, + __LINE__, (u32) (b), (u32) (c)); + _ipw_write_reg32(a, b, c); +} + +#define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs)) +#define ipw_write8(ipw, ofs, val) \ + IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \ + _ipw_write8(ipw, ofs, val) + +#define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs)) +#define ipw_write16(ipw, ofs, val) \ + IPW_DEBUG_IO("%s %d: write_direct16(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \ + _ipw_write16(ipw, ofs, val) + +#define _ipw_write32(ipw, ofs, val) writel((val), (ipw)->hw_base + (ofs)) +#define ipw_write32(ipw, ofs, val) \ + IPW_DEBUG_IO("%s %d: write_direct32(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \ + _ipw_write32(ipw, ofs, val) + +#define _ipw_read8(ipw, ofs) readb((ipw)->hw_base + (ofs)) +static inline u8 __ipw_read8(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) +{ + IPW_DEBUG_IO("%s %d: read_direct8(0x%08X)\n", f, l, (u32) (ofs)); + return _ipw_read8(ipw, ofs); +} + +#define ipw_read8(ipw, ofs) __ipw_read8(__FILE__, __LINE__, ipw, ofs) + +#define _ipw_read16(ipw, ofs) readw((ipw)->hw_base + (ofs)) +static inline u16 __ipw_read16(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) +{ + IPW_DEBUG_IO("%s %d: read_direct16(0x%08X)\n", f, l, (u32) (ofs)); + return _ipw_read16(ipw, ofs); +} + +#define ipw_read16(ipw, ofs) __ipw_read16(__FILE__, __LINE__, ipw, ofs) + +#define _ipw_read32(ipw, ofs) readl((ipw)->hw_base + (ofs)) +static inline u32 __ipw_read32(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) +{ + IPW_DEBUG_IO("%s %d: read_direct32(0x%08X)\n", f, l, (u32) (ofs)); + return _ipw_read32(ipw, ofs); +} + +#define ipw_read32(ipw, ofs) __ipw_read32(__FILE__, __LINE__, ipw, ofs) + +static void _ipw_read_indirect(struct ipw_priv *, u32, u8 *, int); +#define ipw_read_indirect(a, b, c, d) \ + IPW_DEBUG_IO("%s %d: read_inddirect(0x%08X) %d bytes\n", __FILE__, __LINE__, (u32)(b), d); \ + _ipw_read_indirect(a, b, c, d) + +static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 * data, + int num); +#define ipw_write_indirect(a, b, c, d) \ + IPW_DEBUG_IO("%s %d: write_indirect(0x%08X) %d bytes\n", __FILE__, __LINE__, (u32)(b), d); \ + _ipw_write_indirect(a, b, c, d) + +/* indirect write s */ +static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg, u32 value) +{ + IPW_DEBUG_IO(" %p : reg = 0x%8X : value = 0x%8X\n", priv, reg, value); + _ipw_write32(priv, CX2_INDIRECT_ADDR, reg); + _ipw_write32(priv, CX2_INDIRECT_DATA, value); +} + +static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value) +{ + IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value); + _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK); + _ipw_write8(priv, CX2_INDIRECT_DATA, value); + IPW_DEBUG_IO(" reg = 0x%8lX : value = 0x%8X\n", + (unsigned long)(priv->hw_base + CX2_INDIRECT_DATA), value); +} + +static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg, u16 value) +{ + IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value); + _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK); + _ipw_write16(priv, CX2_INDIRECT_DATA, value); +} + +/* indirect read s */ + +static u8 _ipw_read_reg8(struct ipw_priv *priv, u32 reg) +{ + u32 word; + _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK); + IPW_DEBUG_IO(" reg = 0x%8X : \n", reg); + word = _ipw_read32(priv, CX2_INDIRECT_DATA); + return (word >> ((reg & 0x3) * 8)) & 0xff; +} + +static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg) +{ + u32 value; + + IPW_DEBUG_IO("%p : reg = 0x%08x\n", priv, reg); + + _ipw_write32(priv, CX2_INDIRECT_ADDR, reg); + value = _ipw_read32(priv, CX2_INDIRECT_DATA); + IPW_DEBUG_IO(" reg = 0x%4X : value = 0x%4x \n", reg, value); + return value; +} + +/* iterative/auto-increment 32 bit reads and writes */ +static void _ipw_read_indirect(struct ipw_priv *priv, u32 addr, u8 * buf, + int num) +{ + u32 aligned_addr = addr & CX2_INDIRECT_ADDR_MASK; + u32 dif_len = addr - aligned_addr; + u32 aligned_len; + u32 i; + + IPW_DEBUG_IO("addr = %i, buf = %p, num = %i\n", addr, buf, num); + + /* Read the first nibble byte by byte */ + if (unlikely(dif_len)) { + /* Start reading at aligned_addr + dif_len */ + _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + *buf = _ipw_read8(priv, CX2_INDIRECT_DATA + i); + num -= dif_len; + aligned_addr += 4; + } + + /* Read DWs through autoinc register */ + _ipw_write32(priv, CX2_AUTOINC_ADDR, aligned_addr); + aligned_len = num & CX2_INDIRECT_ADDR_MASK; + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + *(u32 *) buf = ipw_read32(priv, CX2_AUTOINC_DATA); + + /* Copy the last nibble */ + dif_len = num - aligned_len; + _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + *buf = ipw_read8(priv, CX2_INDIRECT_DATA + i); +} + +static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 * buf, + int num) +{ + u32 aligned_addr = addr & CX2_INDIRECT_ADDR_MASK; + u32 dif_len = addr - aligned_addr; + u32 aligned_len; + u32 i; + + IPW_DEBUG_IO("addr = %i, buf = %p, num = %i\n", addr, buf, num); + + /* Write the first nibble byte by byte */ + if (unlikely(dif_len)) { + /* Start writing at aligned_addr + dif_len */ + _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr); + for (i = dif_len; i < 4; i++, buf++) + _ipw_write8(priv, CX2_INDIRECT_DATA + i, *buf); + num -= dif_len; + aligned_addr += 4; + } + + /* Write DWs through autoinc register */ + _ipw_write32(priv, CX2_AUTOINC_ADDR, aligned_addr); + aligned_len = num & CX2_INDIRECT_ADDR_MASK; + for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) + _ipw_write32(priv, CX2_AUTOINC_DATA, *(u32 *) buf); + + /* Copy the last nibble */ + dif_len = num - aligned_len; + _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr); + for (i = 0; i < dif_len; i++, buf++) + _ipw_write8(priv, CX2_INDIRECT_DATA + i, *buf); +} + +static void ipw_write_direct(struct ipw_priv *priv, u32 addr, void *buf, + int num) +{ + memcpy_toio((priv->hw_base + addr), buf, num); +} + +static inline void ipw_set_bit(struct ipw_priv *priv, u32 reg, u32 mask) +{ + ipw_write32(priv, reg, ipw_read32(priv, reg) | mask); +} + +static inline void ipw_clear_bit(struct ipw_priv *priv, u32 reg, u32 mask) +{ + ipw_write32(priv, reg, ipw_read32(priv, reg) & ~mask); +} + +static inline void ipw_enable_interrupts(struct ipw_priv *priv) +{ + if (priv->status & STATUS_INT_ENABLED) + return; + priv->status |= STATUS_INT_ENABLED; + ipw_write32(priv, CX2_INTA_MASK_R, CX2_INTA_MASK_ALL); +} + +static inline void ipw_disable_interrupts(struct ipw_priv *priv) +{ + if (!(priv->status & STATUS_INT_ENABLED)) + return; + priv->status &= ~STATUS_INT_ENABLED; + ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL); +} + +static char *ipw_error_desc(u32 val) +{ + switch (val) { + case IPW_FW_ERROR_OK: + return "ERROR_OK"; + case IPW_FW_ERROR_FAIL: + return "ERROR_FAIL"; + case IPW_FW_ERROR_MEMORY_UNDERFLOW: + return "MEMORY_UNDERFLOW"; + case IPW_FW_ERROR_MEMORY_OVERFLOW: + return "MEMORY_OVERFLOW"; + case IPW_FW_ERROR_BAD_PARAM: + return "ERROR_BAD_PARAM"; + case IPW_FW_ERROR_BAD_CHECKSUM: + return "ERROR_BAD_CHECKSUM"; + case IPW_FW_ERROR_NMI_INTERRUPT: + return "ERROR_NMI_INTERRUPT"; + case IPW_FW_ERROR_BAD_DATABASE: + return "ERROR_BAD_DATABASE"; + case IPW_FW_ERROR_ALLOC_FAIL: + return "ERROR_ALLOC_FAIL"; + case IPW_FW_ERROR_DMA_UNDERRUN: + return "ERROR_DMA_UNDERRUN"; + case IPW_FW_ERROR_DMA_STATUS: + return "ERROR_DMA_STATUS"; + case IPW_FW_ERROR_DINOSTATUS_ERROR: + return "ERROR_DINOSTATUS_ERROR"; + case IPW_FW_ERROR_EEPROMSTATUS_ERROR: + return "ERROR_EEPROMSTATUS_ERROR"; + case IPW_FW_ERROR_SYSASSERT: + return "ERROR_SYSASSERT"; + case IPW_FW_ERROR_FATAL_ERROR: + return "ERROR_FATALSTATUS_ERROR"; + default: + return "UNKNOWNSTATUS_ERROR"; + } +} + +static void ipw_dump_nic_error_log(struct ipw_priv *priv) +{ + u32 desc, time, blink1, blink2, ilink1, ilink2, idata, i, count, base; + + base = ipw_read32(priv, IPWSTATUS_ERROR_LOG); + count = ipw_read_reg32(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IPW_ERROR("Start IPW Error Log Dump:\n"); + IPW_ERROR("Status: 0x%08X, Config: %08X\n", + priv->status, priv->config); + } + + for (i = ERROR_START_OFFSET; + i <= count * ERROR_ELEM_SIZE; i += ERROR_ELEM_SIZE) { + desc = ipw_read_reg32(priv, base + i); + time = ipw_read_reg32(priv, base + i + 1 * sizeof(u32)); + blink1 = ipw_read_reg32(priv, base + i + 2 * sizeof(u32)); + blink2 = ipw_read_reg32(priv, base + i + 3 * sizeof(u32)); + ilink1 = ipw_read_reg32(priv, base + i + 4 * sizeof(u32)); + ilink2 = ipw_read_reg32(priv, base + i + 5 * sizeof(u32)); + idata = ipw_read_reg32(priv, base + i + 6 * sizeof(u32)); + + IPW_ERROR("%s %i 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", + ipw_error_desc(desc), time, blink1, blink2, + ilink1, ilink2, idata); + } +} + +static void ipw_dump_nic_event_log(struct ipw_priv *priv) +{ + u32 ev, time, data, i, count, base; + + base = ipw_read32(priv, IPW_EVENT_LOG); + count = ipw_read_reg32(priv, base); + + if (EVENT_START_OFFSET <= count * EVENT_ELEM_SIZE) + IPW_ERROR("Start IPW Event Log Dump:\n"); + + for (i = EVENT_START_OFFSET; + i <= count * EVENT_ELEM_SIZE; i += EVENT_ELEM_SIZE) { + ev = ipw_read_reg32(priv, base + i); + time = ipw_read_reg32(priv, base + i + 1 * sizeof(u32)); + data = ipw_read_reg32(priv, base + i + 2 * sizeof(u32)); + +#ifdef CONFIG_IPW_DEBUG + IPW_ERROR("%i\t0x%08x\t%i\n", time, data, ev); +#endif + } +} + +static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len) +{ + u32 addr, field_info, field_len, field_count, total_len; + + IPW_DEBUG_ORD("ordinal = %i\n", ord); + + if (!priv || !val || !len) { + IPW_DEBUG_ORD("Invalid argument\n"); + return -EINVAL; + } + + /* verify device ordinal tables have been initialized */ + if (!priv->table0_addr || !priv->table1_addr || !priv->table2_addr) { + IPW_DEBUG_ORD("Access ordinals before initialization\n"); + return -EINVAL; + } + + switch (IPW_ORD_TABLE_ID_MASK & ord) { + case IPW_ORD_TABLE_0_MASK: + /* + * TABLE 0: Direct access to a table of 32 bit values + * + * This is a very simple table with the data directly + * read from the table + */ + + /* remove the table id from the ordinal */ + ord &= IPW_ORD_TABLE_VALUE_MASK; + + /* boundary check */ + if (ord > priv->table0_len) { + IPW_DEBUG_ORD("ordinal value (%i) longer then " + "max (%i)\n", ord, priv->table0_len); + return -EINVAL; + } + + /* verify we have enough room to store the value */ + if (*len < sizeof(u32)) { + IPW_DEBUG_ORD("ordinal buffer length too small, " + "need %zd\n", sizeof(u32)); + return -EINVAL; + } + + IPW_DEBUG_ORD("Reading TABLE0[%i] from offset 0x%08x\n", + ord, priv->table0_addr + (ord << 2)); + + *len = sizeof(u32); + ord <<= 2; + *((u32 *) val) = ipw_read32(priv, priv->table0_addr + ord); + break; + + case IPW_ORD_TABLE_1_MASK: + /* + * TABLE 1: Indirect access to a table of 32 bit values + * + * This is a fairly large table of u32 values each + * representing starting addr for the data (which is + * also a u32) + */ + + /* remove the table id from the ordinal */ + ord &= IPW_ORD_TABLE_VALUE_MASK; + + /* boundary check */ + if (ord > priv->table1_len) { + IPW_DEBUG_ORD("ordinal value too long\n"); + return -EINVAL; + } + + /* verify we have enough room to store the value */ + if (*len < sizeof(u32)) { + IPW_DEBUG_ORD("ordinal buffer length too small, " + "need %zd\n", sizeof(u32)); + return -EINVAL; + } + + *((u32 *) val) = + ipw_read_reg32(priv, (priv->table1_addr + (ord << 2))); + *len = sizeof(u32); + break; + + case IPW_ORD_TABLE_2_MASK: + /* + * TABLE 2: Indirect access to a table of variable sized values + * + * This table consist of six values, each containing + * - dword containing the starting offset of the data + * - dword containing the lengh in the first 16bits + * and the count in the second 16bits + */ + + /* remove the table id from the ordinal */ + ord &= IPW_ORD_TABLE_VALUE_MASK; + + /* boundary check */ + if (ord > priv->table2_len) { + IPW_DEBUG_ORD("ordinal value too long\n"); + return -EINVAL; + } + + /* get the address of statistic */ + addr = ipw_read_reg32(priv, priv->table2_addr + (ord << 3)); + + /* get the second DW of statistics ; + * two 16-bit words - first is length, second is count */ + field_info = + ipw_read_reg32(priv, + priv->table2_addr + (ord << 3) + + sizeof(u32)); + + /* get each entry length */ + field_len = *((u16 *) & field_info); + + /* get number of entries */ + field_count = *(((u16 *) & field_info) + 1); + + /* abort if not enought memory */ + total_len = field_len * field_count; + if (total_len > *len) { + *len = total_len; + return -EINVAL; + } + + *len = total_len; + if (!total_len) + return 0; + + IPW_DEBUG_ORD("addr = 0x%08x, total_len = %i, " + "field_info = 0x%08x\n", + addr, total_len, field_info); + ipw_read_indirect(priv, addr, val, total_len); + break; + + default: + IPW_DEBUG_ORD("Invalid ordinal!\n"); + return -EINVAL; + + } + + return 0; +} + +static void ipw_init_ordinals(struct ipw_priv *priv) +{ + priv->table0_addr = IPW_ORDINALS_TABLE_LOWER; + priv->table0_len = ipw_read32(priv, priv->table0_addr); + + IPW_DEBUG_ORD("table 0 offset at 0x%08x, len = %i\n", + priv->table0_addr, priv->table0_len); + + priv->table1_addr = ipw_read32(priv, IPW_ORDINALS_TABLE_1); + priv->table1_len = ipw_read_reg32(priv, priv->table1_addr); + + IPW_DEBUG_ORD("table 1 offset at 0x%08x, len = %i\n", + priv->table1_addr, priv->table1_len); + + priv->table2_addr = ipw_read32(priv, IPW_ORDINALS_TABLE_2); + priv->table2_len = ipw_read_reg32(priv, priv->table2_addr); + priv->table2_len &= 0x0000ffff; /* use first two bytes */ + + IPW_DEBUG_ORD("table 2 offset at 0x%08x, len = %i\n", + priv->table2_addr, priv->table2_len); + +} + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/) + * used for controling the debug level. + * + * See the level definitions in ipw for details. + */ +static ssize_t show_debug_level(struct device_driver *d, char *buf) +{ + return sprintf(buf, "0x%08X\n", ipw_debug_level); +} +static ssize_t store_debug_level(struct device_driver *d, + const char *buf, size_t count) +{ + char *p = (char *)buf; + u32 val; + + if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { + p++; + if (p[0] == 'x' || p[0] == 'X') + p++; + val = simple_strtoul(p, &p, 16); + } else + val = simple_strtoul(p, &p, 10); + if (p == buf) + printk(KERN_INFO DRV_NAME + ": %s is not in hex or decimal form.\n", buf); + else + ipw_debug_level = val; + + return strnlen(buf, count); +} + +static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, + show_debug_level, store_debug_level); + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct ipw_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->status); +} + +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_cfg(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipw_priv *p = d->driver_data; + return sprintf(buf, "0x%08x\n", (int)p->config); +} + +static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); + +static ssize_t show_nic_type(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct ipw_priv *p = d->driver_data; + u8 type = p->eeprom[EEPROM_NIC_TYPE]; + + switch (type) { + case EEPROM_NIC_TYPE_STANDARD: + return sprintf(buf, "STANDARD\n"); + case EEPROM_NIC_TYPE_DELL: + return sprintf(buf, "DELL\n"); + case EEPROM_NIC_TYPE_FUJITSU: + return sprintf(buf, "FUJITSU\n"); + case EEPROM_NIC_TYPE_IBM: + return sprintf(buf, "IBM\n"); + case EEPROM_NIC_TYPE_HP: + return sprintf(buf, "HP\n"); + } + + return sprintf(buf, "UNKNOWN\n"); +} + +static DEVICE_ATTR(nic_type, S_IRUGO, show_nic_type, NULL); + +static ssize_t dump_error_log(struct device *d, + struct device_attribute *attr, const char *buf, + size_t count) +{ + char *p = (char *)buf; + + if (p[0] == '1') + ipw_dump_nic_error_log((struct ipw_priv *)d->driver_data); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); + +static ssize_t dump_event_log(struct device *d, + struct device_attribute *attr, const char *buf, + size_t count) +{ + char *p = (char *)buf; + + if (p[0] == '1') + ipw_dump_nic_event_log((struct ipw_priv *)d->driver_data); + + return strnlen(buf, count); +} + +static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); + +static ssize_t show_ucode_version(struct device *d, + struct device_attribute *attr, char *buf) +{ + u32 len = sizeof(u32), tmp = 0; + struct ipw_priv *p = d->driver_data; + + if (ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len)) + return 0; + + return sprintf(buf, "0x%08x\n", tmp); +} + +static DEVICE_ATTR(ucode_version, S_IWUSR | S_IRUGO, show_ucode_version, NULL); + +static ssize_t show_rtc(struct device *d, struct device_attribute *attr, + char *buf) +{ + u32 len = sizeof(u32), tmp = 0; + struct ipw_priv *p = d->driver_data; + + if (ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len)) + return 0; + + return sprintf(buf, "0x%08x\n", tmp); +} + +static DEVICE_ATTR(rtc, S_IWUSR | S_IRUGO, show_rtc, NULL); + +/* + * Add a device attribute to view/control the delay between eeprom + * operations. + */ +static ssize_t show_eeprom_delay(struct device *d, + struct device_attribute *attr, char *buf) +{ + int n = ((struct ipw_priv *)d->driver_data)->eeprom_delay; + return sprintf(buf, "%i\n", n); +} +static ssize_t store_eeprom_delay(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw_priv *p = d->driver_data; + sscanf(buf, "%i", &p->eeprom_delay); + return strnlen(buf, count); +} + +static DEVICE_ATTR(eeprom_delay, S_IWUSR | S_IRUGO, + show_eeprom_delay, store_eeprom_delay); + +static ssize_t show_command_event_reg(struct device *d, + struct device_attribute *attr, char *buf) +{ + u32 reg = 0; + struct ipw_priv *p = d->driver_data; + + reg = ipw_read_reg32(p, CX2_INTERNAL_CMD_EVENT); + return sprintf(buf, "0x%08x\n", reg); +} +static ssize_t store_command_event_reg(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 reg; + struct ipw_priv *p = d->driver_data; + + sscanf(buf, "%x", ®); + ipw_write_reg32(p, CX2_INTERNAL_CMD_EVENT, reg); + return strnlen(buf, count); +} + +static DEVICE_ATTR(command_event_reg, S_IWUSR | S_IRUGO, + show_command_event_reg, store_command_event_reg); + +static ssize_t show_mem_gpio_reg(struct device *d, + struct device_attribute *attr, char *buf) +{ + u32 reg = 0; + struct ipw_priv *p = d->driver_data; + + reg = ipw_read_reg32(p, 0x301100); + return sprintf(buf, "0x%08x\n", reg); +} +static ssize_t store_mem_gpio_reg(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 reg; + struct ipw_priv *p = d->driver_data; + + sscanf(buf, "%x", ®); + ipw_write_reg32(p, 0x301100, reg); + return strnlen(buf, count); +} + +static DEVICE_ATTR(mem_gpio_reg, S_IWUSR | S_IRUGO, + show_mem_gpio_reg, store_mem_gpio_reg); + +static ssize_t show_indirect_dword(struct device *d, + struct device_attribute *attr, char *buf) +{ + u32 reg = 0; + struct ipw_priv *priv = d->driver_data; + if (priv->status & STATUS_INDIRECT_DWORD) + reg = ipw_read_reg32(priv, priv->indirect_dword); + else + reg = 0; + + return sprintf(buf, "0x%08x\n", reg); +} +static ssize_t store_indirect_dword(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw_priv *priv = d->driver_data; + + sscanf(buf, "%x", &priv->indirect_dword); + priv->status |= STATUS_INDIRECT_DWORD; + return strnlen(buf, count); +} + +static DEVICE_ATTR(indirect_dword, S_IWUSR | S_IRUGO, + show_indirect_dword, store_indirect_dword); + +static ssize_t show_indirect_byte(struct device *d, + struct device_attribute *attr, char *buf) +{ + u8 reg = 0; + struct ipw_priv *priv = d->driver_data; + if (priv->status & STATUS_INDIRECT_BYTE) + reg = ipw_read_reg8(priv, priv->indirect_byte); + else + reg = 0; + + return sprintf(buf, "0x%02x\n", reg); +} +static ssize_t store_indirect_byte(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw_priv *priv = d->driver_data; + + sscanf(buf, "%x", &priv->indirect_byte); + priv->status |= STATUS_INDIRECT_BYTE; + return strnlen(buf, count); +} + +static DEVICE_ATTR(indirect_byte, S_IWUSR | S_IRUGO, + show_indirect_byte, store_indirect_byte); + +static ssize_t show_direct_dword(struct device *d, + struct device_attribute *attr, char *buf) +{ + u32 reg = 0; + struct ipw_priv *priv = d->driver_data; + + if (priv->status & STATUS_DIRECT_DWORD) + reg = ipw_read32(priv, priv->direct_dword); + else + reg = 0; + + return sprintf(buf, "0x%08x\n", reg); +} +static ssize_t store_direct_dword(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw_priv *priv = d->driver_data; + + sscanf(buf, "%x", &priv->direct_dword); + priv->status |= STATUS_DIRECT_DWORD; + return strnlen(buf, count); +} + +static DEVICE_ATTR(direct_dword, S_IWUSR | S_IRUGO, + show_direct_dword, store_direct_dword); + +static inline int rf_kill_active(struct ipw_priv *priv) +{ + if (0 == (ipw_read32(priv, 0x30) & 0x10000)) + priv->status |= STATUS_RF_KILL_HW; + else + priv->status &= ~STATUS_RF_KILL_HW; + + return (priv->status & STATUS_RF_KILL_HW) ? 1 : 0; +} + +static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, + char *buf) +{ + /* 0 - RF kill not enabled + 1 - SW based RF kill active (sysfs) + 2 - HW based RF kill active + 3 - Both HW and SW baed RF kill active */ + struct ipw_priv *priv = d->driver_data; + int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | + (rf_kill_active(priv) ? 0x2 : 0x0); + return sprintf(buf, "%i\n", val); +} + +static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio) +{ + if ((disable_radio ? 1 : 0) == + (priv->status & STATUS_RF_KILL_SW ? 1 : 0)) + return 0; + + IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n", + disable_radio ? "OFF" : "ON"); + + if (disable_radio) { + priv->status |= STATUS_RF_KILL_SW; + + if (priv->workqueue) { + cancel_delayed_work(&priv->request_scan); + } + wake_up_interruptible(&priv->wait_command_queue); + queue_work(priv->workqueue, &priv->down); + } else { + priv->status &= ~STATUS_RF_KILL_SW; + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by HW switch\n"); + /* Make sure the RF_KILL check timer is running */ + cancel_delayed_work(&priv->rf_kill); + queue_delayed_work(priv->workqueue, &priv->rf_kill, + 2 * HZ); + } else + queue_work(priv->workqueue, &priv->up); + } + + return 1; +} + +static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ipw_priv *priv = d->driver_data; + + ipw_radio_kill_sw(priv, buf[0] == '1'); + + return count; +} + +static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill); + +static void ipw_irq_tasklet(struct ipw_priv *priv) +{ + u32 inta, inta_mask, handled = 0; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&priv->lock, flags); + + inta = ipw_read32(priv, CX2_INTA_RW); + inta_mask = ipw_read32(priv, CX2_INTA_MASK_R); + inta &= (CX2_INTA_MASK_ALL & inta_mask); + + /* Add any cached INTA values that need to be handled */ + inta |= priv->isr_inta; + + /* handle all the justifications for the interrupt */ + if (inta & CX2_INTA_BIT_RX_TRANSFER) { + ipw_rx(priv); + handled |= CX2_INTA_BIT_RX_TRANSFER; + } + + if (inta & CX2_INTA_BIT_TX_CMD_QUEUE) { + IPW_DEBUG_HC("Command completed.\n"); + rc = ipw_queue_tx_reclaim(priv, &priv->txq_cmd, -1); + priv->status &= ~STATUS_HCMD_ACTIVE; + wake_up_interruptible(&priv->wait_command_queue); + handled |= CX2_INTA_BIT_TX_CMD_QUEUE; + } + + if (inta & CX2_INTA_BIT_TX_QUEUE_1) { + IPW_DEBUG_TX("TX_QUEUE_1\n"); + rc = ipw_queue_tx_reclaim(priv, &priv->txq[0], 0); + handled |= CX2_INTA_BIT_TX_QUEUE_1; + } + + if (inta & CX2_INTA_BIT_TX_QUEUE_2) { + IPW_DEBUG_TX("TX_QUEUE_2\n"); + rc = ipw_queue_tx_reclaim(priv, &priv->txq[1], 1); + handled |= CX2_INTA_BIT_TX_QUEUE_2; + } + + if (inta & CX2_INTA_BIT_TX_QUEUE_3) { + IPW_DEBUG_TX("TX_QUEUE_3\n"); + rc = ipw_queue_tx_reclaim(priv, &priv->txq[2], 2); + handled |= CX2_INTA_BIT_TX_QUEUE_3; + } + + if (inta & CX2_INTA_BIT_TX_QUEUE_4) { + IPW_DEBUG_TX("TX_QUEUE_4\n"); + rc = ipw_queue_tx_reclaim(priv, &priv->txq[3], 3); + handled |= CX2_INTA_BIT_TX_QUEUE_4; + } + + if (inta & CX2_INTA_BIT_STATUS_CHANGE) { + IPW_WARNING("STATUS_CHANGE\n"); + handled |= CX2_INTA_BIT_STATUS_CHANGE; + } + + if (inta & CX2_INTA_BIT_BEACON_PERIOD_EXPIRED) { + IPW_WARNING("TX_PERIOD_EXPIRED\n"); + handled |= CX2_INTA_BIT_BEACON_PERIOD_EXPIRED; + } + + if (inta & CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE) { + IPW_WARNING("HOST_CMD_DONE\n"); + handled |= CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE; + } + + if (inta & CX2_INTA_BIT_FW_INITIALIZATION_DONE) { + IPW_WARNING("FW_INITIALIZATION_DONE\n"); + handled |= CX2_INTA_BIT_FW_INITIALIZATION_DONE; + } + + if (inta & CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE) { + IPW_WARNING("PHY_OFF_DONE\n"); + handled |= CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE; + } + + if (inta & CX2_INTA_BIT_RF_KILL_DONE) { + IPW_DEBUG_RF_KILL("RF_KILL_DONE\n"); + priv->status |= STATUS_RF_KILL_HW; + wake_up_interruptible(&priv->wait_command_queue); + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + cancel_delayed_work(&priv->request_scan); + queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ); + handled |= CX2_INTA_BIT_RF_KILL_DONE; + } + + if (inta & CX2_INTA_BIT_FATAL_ERROR) { + IPW_ERROR("Firmware error detected. Restarting.\n"); +#ifdef CONFIG_IPW_DEBUG + if (ipw_debug_level & IPW_DL_FW_ERRORS) { + ipw_dump_nic_error_log(priv); + ipw_dump_nic_event_log(priv); + } +#endif + queue_work(priv->workqueue, &priv->adapter_restart); + handled |= CX2_INTA_BIT_FATAL_ERROR; + } + + if (inta & CX2_INTA_BIT_PARITY_ERROR) { + IPW_ERROR("Parity error\n"); + handled |= CX2_INTA_BIT_PARITY_ERROR; + } + + if (handled != inta) { + IPW_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); + } + + /* enable all interrupts */ + ipw_enable_interrupts(priv); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +#ifdef CONFIG_IPW_DEBUG +#define IPW_CMD(x) case IPW_CMD_ ## x : return #x +static char *get_cmd_string(u8 cmd) +{ + switch (cmd) { + IPW_CMD(HOST_COMPLETE); + IPW_CMD(POWER_DOWN); + IPW_CMD(SYSTEM_CONFIG); + IPW_CMD(MULTICAST_ADDRESS); + IPW_CMD(SSID); + IPW_CMD(ADAPTER_ADDRESS); + IPW_CMD(PORT_TYPE); + IPW_CMD(RTS_THRESHOLD); + IPW_CMD(FRAG_THRESHOLD); + IPW_CMD(POWER_MODE); + IPW_CMD(WEP_KEY); + IPW_CMD(TGI_TX_KEY); + IPW_CMD(SCAN_REQUEST); + IPW_CMD(SCAN_REQUEST_EXT); + IPW_CMD(ASSOCIATE); + IPW_CMD(SUPPORTED_RATES); + IPW_CMD(SCAN_ABORT); + IPW_CMD(TX_FLUSH); + IPW_CMD(QOS_PARAMETERS); + IPW_CMD(DINO_CONFIG); + IPW_CMD(RSN_CAPABILITIES); + IPW_CMD(RX_KEY); + IPW_CMD(CARD_DISABLE); + IPW_CMD(SEED_NUMBER); + IPW_CMD(TX_POWER); + IPW_CMD(COUNTRY_INFO); + IPW_CMD(AIRONET_INFO); + IPW_CMD(AP_TX_POWER); + IPW_CMD(CCKM_INFO); + IPW_CMD(CCX_VER_INFO); + IPW_CMD(SET_CALIBRATION); + IPW_CMD(SENSITIVITY_CALIB); + IPW_CMD(RETRY_LIMIT); + IPW_CMD(IPW_PRE_POWER_DOWN); + IPW_CMD(VAP_BEACON_TEMPLATE); + IPW_CMD(VAP_DTIM_PERIOD); + IPW_CMD(EXT_SUPPORTED_RATES); + IPW_CMD(VAP_LOCAL_TX_PWR_CONSTRAINT); + IPW_CMD(VAP_QUIET_INTERVALS); + IPW_CMD(VAP_CHANNEL_SWITCH); + IPW_CMD(VAP_MANDATORY_CHANNELS); + IPW_CMD(VAP_CELL_PWR_LIMIT); + IPW_CMD(VAP_CF_PARAM_SET); + IPW_CMD(VAP_SET_BEACONING_STATE); + IPW_CMD(MEASUREMENT); + IPW_CMD(POWER_CAPABILITY); + IPW_CMD(SUPPORTED_CHANNELS); + IPW_CMD(TPC_REPORT); + IPW_CMD(WME_INFO); + IPW_CMD(PRODUCTION_COMMAND); + default: + return "UNKNOWN"; + } +} +#endif /* CONFIG_IPW_DEBUG */ + +#define HOST_COMPLETE_TIMEOUT HZ +static int ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) +{ + int rc = 0; + + if (priv->status & STATUS_HCMD_ACTIVE) { + IPW_ERROR("Already sending a command\n"); + return -1; + } + + priv->status |= STATUS_HCMD_ACTIVE; + + IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n", + get_cmd_string(cmd->cmd), cmd->cmd, cmd->len); + printk_buf(IPW_DL_HOST_COMMAND, (u8 *) cmd->param, cmd->len); + + rc = ipw_queue_tx_hcmd(priv, cmd->cmd, &cmd->param, cmd->len, 0); + if (rc) + return rc; + + rc = wait_event_interruptible_timeout(priv->wait_command_queue, + !(priv-> + status & STATUS_HCMD_ACTIVE), + HOST_COMPLETE_TIMEOUT); + if (rc == 0) { + IPW_DEBUG_INFO("Command completion failed out after %dms.\n", + jiffies_to_msecs(HOST_COMPLETE_TIMEOUT)); + priv->status &= ~STATUS_HCMD_ACTIVE; + return -EIO; + } + if (priv->status & STATUS_RF_KILL_MASK) { + IPW_DEBUG_INFO("Command aborted due to RF Kill Switch\n"); + return -EIO; + } + + return 0; +} + +static int ipw_send_host_complete(struct ipw_priv *priv) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_HOST_COMPLETE, + .len = 0 + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send HOST_COMPLETE command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_system_config(struct ipw_priv *priv, + struct ipw_sys_config *config) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SYSTEM_CONFIG, + .len = sizeof(*config) + }; + + if (!priv || !config) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, config, sizeof(*config)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SYSTEM_CONFIG command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_ssid(struct ipw_priv *priv, u8 * ssid, int len) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SSID, + .len = min(len, IW_ESSID_MAX_SIZE) + }; + + if (!priv || !ssid) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, ssid, cmd.len); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SSID command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_adapter_address(struct ipw_priv *priv, u8 * mac) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_ADAPTER_ADDRESS, + .len = ETH_ALEN + }; + + if (!priv || !mac) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + IPW_DEBUG_INFO("%s: Setting MAC to " MAC_FMT "\n", + priv->net_dev->name, MAC_ARG(mac)); + + memcpy(&cmd.param, mac, ETH_ALEN); + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send ADAPTER_ADDRESS command\n"); + return -1; + } + + return 0; +} + +static void ipw_adapter_restart(void *adapter) +{ + struct ipw_priv *priv = adapter; + + if (priv->status & STATUS_RF_KILL_MASK) + return; + + ipw_down(priv); + if (ipw_up(priv)) { + IPW_ERROR("Failed to up device\n"); + return; + } +} + +#define IPW_SCAN_CHECK_WATCHDOG (5 * HZ) + +static void ipw_scan_check(void *data) +{ + struct ipw_priv *priv = data; + if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) { + IPW_DEBUG_SCAN("Scan completion watchdog resetting " + "adapter (%dms).\n", + IPW_SCAN_CHECK_WATCHDOG / 100); + ipw_adapter_restart(priv); + } +} + +static int ipw_send_scan_request_ext(struct ipw_priv *priv, + struct ipw_scan_request_ext *request) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SCAN_REQUEST_EXT, + .len = sizeof(*request) + }; + + if (!priv || !request) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, request, sizeof(*request)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SCAN_REQUEST_EXT command\n"); + return -1; + } + + queue_delayed_work(priv->workqueue, &priv->scan_check, + IPW_SCAN_CHECK_WATCHDOG); + return 0; +} + +static int ipw_send_scan_abort(struct ipw_priv *priv) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SCAN_ABORT, + .len = 0 + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SCAN_ABORT command\n"); + return -1; + } + + return 0; +} + +static int ipw_set_sensitivity(struct ipw_priv *priv, u16 sens) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SENSITIVITY_CALIB, + .len = sizeof(struct ipw_sensitivity_calib) + }; + struct ipw_sensitivity_calib *calib = (struct ipw_sensitivity_calib *) + &cmd.param; + calib->beacon_rssi_raw = sens; + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SENSITIVITY CALIB command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_associate(struct ipw_priv *priv, + struct ipw_associate *associate) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_ASSOCIATE, + .len = sizeof(*associate) + }; + + if (!priv || !associate) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, associate, sizeof(*associate)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send ASSOCIATE command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_supported_rates(struct ipw_priv *priv, + struct ipw_supported_rates *rates) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SUPPORTED_RATES, + .len = sizeof(*rates) + }; + + if (!priv || !rates) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, rates, sizeof(*rates)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SUPPORTED_RATES command\n"); + return -1; + } + + return 0; +} + +static int ipw_set_random_seed(struct ipw_priv *priv) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_SEED_NUMBER, + .len = sizeof(u32) + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + get_random_bytes(&cmd.param, sizeof(u32)); + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send SEED_NUMBER command\n"); + return -1; + } + + return 0; +} + +#if 0 +static int ipw_send_card_disable(struct ipw_priv *priv, u32 phy_off) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_CARD_DISABLE, + .len = sizeof(u32) + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + *((u32 *) & cmd.param) = phy_off; + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send CARD_DISABLE command\n"); + return -1; + } + + return 0; +} +#endif + +static int ipw_send_tx_power(struct ipw_priv *priv, struct ipw_tx_power *power) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_TX_POWER, + .len = sizeof(*power) + }; + + if (!priv || !power) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, power, sizeof(*power)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send TX_POWER command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_rts_threshold(struct ipw_priv *priv, u16 rts) +{ + struct ipw_rts_threshold rts_threshold = { + .rts_threshold = rts, + }; + struct host_cmd cmd = { + .cmd = IPW_CMD_RTS_THRESHOLD, + .len = sizeof(rts_threshold) + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, &rts_threshold, sizeof(rts_threshold)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send RTS_THRESHOLD command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_frag_threshold(struct ipw_priv *priv, u16 frag) +{ + struct ipw_frag_threshold frag_threshold = { + .frag_threshold = frag, + }; + struct host_cmd cmd = { + .cmd = IPW_CMD_FRAG_THRESHOLD, + .len = sizeof(frag_threshold) + }; + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + memcpy(&cmd.param, &frag_threshold, sizeof(frag_threshold)); + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send FRAG_THRESHOLD command\n"); + return -1; + } + + return 0; +} + +static int ipw_send_power_mode(struct ipw_priv *priv, u32 mode) +{ + struct host_cmd cmd = { + .cmd = IPW_CMD_POWER_MODE, + .len = sizeof(u32) + }; + u32 *param = (u32 *) (&cmd.param); + + if (!priv) { + IPW_ERROR("Invalid args\n"); + return -1; + } + + /* If on battery, set to 3, if AC set to CAM, else user + * level */ + switch (mode) { + case IPW_POWER_BATTERY: + *param = IPW_POWER_INDEX_3; + break; + case IPW_POWER_AC: + *param = IPW_POWER_MODE_CAM; + break; + default: + *param = mode; + break; + } + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send POWER_MODE command\n"); + return -1; + } + + return 0; +} + +/* + * The IPW device contains a Microwire compatible EEPROM that stores + * various data like the MAC address. Usually the firmware has exclusive + * access to the eeprom, but during device initialization (before the + * device driver has sent the HostComplete command to the firmware) the + * device driver has read access to the EEPROM by way of indirect addressing + * through a couple of memory mapped registers. + * + * The following is a simplified implementation for pulling data out of the + * the eeprom, along with some helper functions to find information in + * the per device private data's copy of the eeprom. + * + * NOTE: To better understand how these functions work (i.e what is a chip + * select and why do have to keep driving the eeprom clock?), read + * just about any data sheet for a Microwire compatible EEPROM. + */ + +/* write a 32 bit value into the indirect accessor register */ +static inline void eeprom_write_reg(struct ipw_priv *p, u32 data) +{ + ipw_write_reg32(p, FW_MEM_REG_EEPROM_ACCESS, data); + + /* the eeprom requires some time to complete the operation */ + udelay(p->eeprom_delay); + + return; +} + +/* perform a chip select operation */ +static inline void eeprom_cs(struct ipw_priv *priv) +{ + eeprom_write_reg(priv, 0); + eeprom_write_reg(priv, EEPROM_BIT_CS); + eeprom_write_reg(priv, EEPROM_BIT_CS | EEPROM_BIT_SK); + eeprom_write_reg(priv, EEPROM_BIT_CS); +} + +/* perform a chip select operation */ +static inline void eeprom_disable_cs(struct ipw_priv *priv) +{ + eeprom_write_reg(priv, EEPROM_BIT_CS); + eeprom_write_reg(priv, 0); + eeprom_write_reg(priv, EEPROM_BIT_SK); +} + +/* push a single bit down to the eeprom */ +static inline void eeprom_write_bit(struct ipw_priv *p, u8 bit) +{ + int d = (bit ? EEPROM_BIT_DI : 0); + eeprom_write_reg(p, EEPROM_BIT_CS | d); + eeprom_write_reg(p, EEPROM_BIT_CS | d | EEPROM_BIT_SK); +} + +/* push an opcode followed by an address down to the eeprom */ +static void eeprom_op(struct ipw_priv *priv, u8 op, u8 addr) +{ + int i; + + eeprom_cs(priv); + eeprom_write_bit(priv, 1); + eeprom_write_bit(priv, op & 2); + eeprom_write_bit(priv, op & 1); + for (i = 7; i >= 0; i--) { + eeprom_write_bit(priv, addr & (1 << i)); + } +} + +/* pull 16 bits off the eeprom, one bit at a time */ +static u16 eeprom_read_u16(struct ipw_priv *priv, u8 addr) +{ + int i; + u16 r = 0; + + /* Send READ Opcode */ + eeprom_op(priv, EEPROM_CMD_READ, addr); + + /* Send dummy bit */ + eeprom_write_reg(priv, EEPROM_BIT_CS); + + /* Read the byte off the eeprom one bit at a time */ + for (i = 0; i < 16; i++) { + u32 data = 0; + eeprom_write_reg(priv, EEPROM_BIT_CS | EEPROM_BIT_SK); + eeprom_write_reg(priv, EEPROM_BIT_CS); + data = ipw_read_reg32(priv, FW_MEM_REG_EEPROM_ACCESS); + r = (r << 1) | ((data & EEPROM_BIT_DO) ? 1 : 0); + } + + /* Send another dummy bit */ + eeprom_write_reg(priv, 0); + eeprom_disable_cs(priv); + + return r; +} + +/* helper function for pulling the mac address out of the private */ +/* data's copy of the eeprom data */ +static void eeprom_parse_mac(struct ipw_priv *priv, u8 * mac) +{ + u8 *ee = (u8 *) priv->eeprom; + memcpy(mac, &ee[EEPROM_MAC_ADDRESS], 6); +} + +/* + * Either the device driver (i.e. the host) or the firmware can + * load eeprom data into the designated region in SRAM. If neither + * happens then the FW will shutdown with a fatal error. + * + * In order to signal the FW to load the EEPROM, the EEPROM_LOAD_DISABLE + * bit needs region of shared SRAM needs to be non-zero. + */ +static void ipw_eeprom_init_sram(struct ipw_priv *priv) +{ + int i; + u16 *eeprom = (u16 *) priv->eeprom; + + IPW_DEBUG_TRACE(">>\n"); + + /* read entire contents of eeprom into private buffer */ + for (i = 0; i < 128; i++) + eeprom[i] = eeprom_read_u16(priv, (u8) i); + + /* + If the data looks correct, then copy it to our private + copy. Otherwise let the firmware know to perform the operation + on it's own + */ + if ((priv->eeprom + EEPROM_VERSION) != 0) { + IPW_DEBUG_INFO("Writing EEPROM data into SRAM\n"); + + /* write the eeprom data to sram */ + for (i = 0; i < CX2_EEPROM_IMAGE_SIZE; i++) + ipw_write8(priv, IPW_EEPROM_DATA + i, priv->eeprom[i]); + + /* Do not load eeprom data on fatal error or suspend */ + ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 0); + } else { + IPW_DEBUG_INFO("Enabling FW initializationg of SRAM\n"); + + /* Load eeprom data on fatal error or suspend */ + ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 1); + } + + IPW_DEBUG_TRACE("<<\n"); +} + +static inline void ipw_zero_memory(struct ipw_priv *priv, u32 start, u32 count) +{ + count >>= 2; + if (!count) + return; + _ipw_write32(priv, CX2_AUTOINC_ADDR, start); + while (count--) + _ipw_write32(priv, CX2_AUTOINC_DATA, 0); +} + +static inline void ipw_fw_dma_reset_command_blocks(struct ipw_priv *priv) +{ + ipw_zero_memory(priv, CX2_SHARED_SRAM_DMA_CONTROL, + CB_NUMBER_OF_ELEMENTS_SMALL * + sizeof(struct command_block)); +} + +static int ipw_fw_dma_enable(struct ipw_priv *priv) +{ /* start dma engine but no transfers yet */ + + IPW_DEBUG_FW(">> : \n"); + + /* Start the dma */ + ipw_fw_dma_reset_command_blocks(priv); + + /* Write CB base address */ + ipw_write_reg32(priv, CX2_DMA_I_CB_BASE, CX2_SHARED_SRAM_DMA_CONTROL); + + IPW_DEBUG_FW("<< : \n"); + return 0; +} + +static void ipw_fw_dma_abort(struct ipw_priv *priv) +{ + u32 control = 0; + + IPW_DEBUG_FW(">> :\n"); + + //set the Stop and Abort bit + control = DMA_CONTROL_SMALL_CB_CONST_VALUE | DMA_CB_STOP_AND_ABORT; + ipw_write_reg32(priv, CX2_DMA_I_DMA_CONTROL, control); + priv->sram_desc.last_cb_index = 0; + + IPW_DEBUG_FW("<< \n"); +} + +static int ipw_fw_dma_write_command_block(struct ipw_priv *priv, int index, + struct command_block *cb) +{ + u32 address = + CX2_SHARED_SRAM_DMA_CONTROL + + (sizeof(struct command_block) * index); + IPW_DEBUG_FW(">> :\n"); + + ipw_write_indirect(priv, address, (u8 *) cb, + (int)sizeof(struct command_block)); + + IPW_DEBUG_FW("<< :\n"); + return 0; + +} + +static int ipw_fw_dma_kick(struct ipw_priv *priv) +{ + u32 control = 0; + u32 index = 0; + + IPW_DEBUG_FW(">> :\n"); + + for (index = 0; index < priv->sram_desc.last_cb_index; index++) + ipw_fw_dma_write_command_block(priv, index, + &priv->sram_desc.cb_list[index]); + + /* Enable the DMA in the CSR register */ + ipw_clear_bit(priv, CX2_RESET_REG, + CX2_RESET_REG_MASTER_DISABLED | + CX2_RESET_REG_STOP_MASTER); + + /* Set the Start bit. */ + control = DMA_CONTROL_SMALL_CB_CONST_VALUE | DMA_CB_START; + ipw_write_reg32(priv, CX2_DMA_I_DMA_CONTROL, control); + + IPW_DEBUG_FW("<< :\n"); + return 0; +} + +static void ipw_fw_dma_dump_command_block(struct ipw_priv *priv) +{ + u32 address; + u32 register_value = 0; + u32 cb_fields_address = 0; + + IPW_DEBUG_FW(">> :\n"); + address = ipw_read_reg32(priv, CX2_DMA_I_CURRENT_CB); + IPW_DEBUG_FW_INFO("Current CB is 0x%x \n", address); + + /* Read the DMA Controlor register */ + register_value = ipw_read_reg32(priv, CX2_DMA_I_DMA_CONTROL); + IPW_DEBUG_FW_INFO("CX2_DMA_I_DMA_CONTROL is 0x%x \n", register_value); + + /* Print the CB values */ + cb_fields_address = address; + register_value = ipw_read_reg32(priv, cb_fields_address); + IPW_DEBUG_FW_INFO("Current CB ControlField is 0x%x \n", register_value); + + cb_fields_address += sizeof(u32); + register_value = ipw_read_reg32(priv, cb_fields_address); + IPW_DEBUG_FW_INFO("Current CB Source Field is 0x%x \n", register_value); + + cb_fields_address += sizeof(u32); + register_value = ipw_read_reg32(priv, cb_fields_address); + IPW_DEBUG_FW_INFO("Current CB Destination Field is 0x%x \n", + register_value); + + cb_fields_address += sizeof(u32); + register_value = ipw_read_reg32(priv, cb_fields_address); + IPW_DEBUG_FW_INFO("Current CB Status Field is 0x%x \n", register_value); + + IPW_DEBUG_FW(">> :\n"); +} + +static int ipw_fw_dma_command_block_index(struct ipw_priv *priv) +{ + u32 current_cb_address = 0; + u32 current_cb_index = 0; + + IPW_DEBUG_FW("<< :\n"); + current_cb_address = ipw_read_reg32(priv, CX2_DMA_I_CURRENT_CB); + + current_cb_index = (current_cb_address - CX2_SHARED_SRAM_DMA_CONTROL) / + sizeof(struct command_block); + + IPW_DEBUG_FW_INFO("Current CB index 0x%x address = 0x%X \n", + current_cb_index, current_cb_address); + + IPW_DEBUG_FW(">> :\n"); + return current_cb_index; + +} + +static int ipw_fw_dma_add_command_block(struct ipw_priv *priv, + u32 src_address, + u32 dest_address, + u32 length, + int interrupt_enabled, int is_last) +{ + + u32 control = CB_VALID | CB_SRC_LE | CB_DEST_LE | CB_SRC_AUTOINC | + CB_SRC_IO_GATED | CB_DEST_AUTOINC | CB_SRC_SIZE_LONG | + CB_DEST_SIZE_LONG; + struct command_block *cb; + u32 last_cb_element = 0; + + IPW_DEBUG_FW_INFO("src_address=0x%x dest_address=0x%x length=0x%x\n", + src_address, dest_address, length); + + if (priv->sram_desc.last_cb_index >= CB_NUMBER_OF_ELEMENTS_SMALL) + return -1; + + last_cb_element = priv->sram_desc.last_cb_index; + cb = &priv->sram_desc.cb_list[last_cb_element]; + priv->sram_desc.last_cb_index++; + + /* Calculate the new CB control word */ + if (interrupt_enabled) + control |= CB_INT_ENABLED; + + if (is_last) + control |= CB_LAST_VALID; + + control |= length; + + /* Calculate the CB Element's checksum value */ + cb->status = control ^ src_address ^ dest_address; + + /* Copy the Source and Destination addresses */ + cb->dest_addr = dest_address; + cb->source_addr = src_address; + + /* Copy the Control Word last */ + cb->control = control; + + return 0; +} + +static int ipw_fw_dma_add_buffer(struct ipw_priv *priv, + u32 src_phys, u32 dest_address, u32 length) +{ + u32 bytes_left = length; + u32 src_offset = 0; + u32 dest_offset = 0; + int status = 0; + IPW_DEBUG_FW(">> \n"); + IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n", + src_phys, dest_address, length); + while (bytes_left > CB_MAX_LENGTH) { + status = ipw_fw_dma_add_command_block(priv, + src_phys + src_offset, + dest_address + + dest_offset, + CB_MAX_LENGTH, 0, 0); + if (status) { + IPW_DEBUG_FW_INFO(": Failed\n"); + return -1; + } else + IPW_DEBUG_FW_INFO(": Added new cb\n"); + + src_offset += CB_MAX_LENGTH; + dest_offset += CB_MAX_LENGTH; + bytes_left -= CB_MAX_LENGTH; + } + + /* add the buffer tail */ + if (bytes_left > 0) { + status = + ipw_fw_dma_add_command_block(priv, src_phys + src_offset, + dest_address + dest_offset, + bytes_left, 0, 0); + if (status) { + IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n"); + return -1; + } else + IPW_DEBUG_FW_INFO + (": Adding new cb - the buffer tail\n"); + } + + IPW_DEBUG_FW("<< \n"); + return 0; +} + +static int ipw_fw_dma_wait(struct ipw_priv *priv) +{ + u32 current_index = 0; + u32 watchdog = 0; + + IPW_DEBUG_FW(">> : \n"); + + current_index = ipw_fw_dma_command_block_index(priv); + IPW_DEBUG_FW_INFO("sram_desc.last_cb_index:0x%8X\n", + (int)priv->sram_desc.last_cb_index); + + while (current_index < priv->sram_desc.last_cb_index) { + udelay(50); + current_index = ipw_fw_dma_command_block_index(priv); + + watchdog++; + + if (watchdog > 400) { + IPW_DEBUG_FW_INFO("Timeout\n"); + ipw_fw_dma_dump_command_block(priv); + ipw_fw_dma_abort(priv); + return -1; + } + } + + ipw_fw_dma_abort(priv); + + /*Disable the DMA in the CSR register */ + ipw_set_bit(priv, CX2_RESET_REG, + CX2_RESET_REG_MASTER_DISABLED | CX2_RESET_REG_STOP_MASTER); + + IPW_DEBUG_FW("<< dmaWaitSync \n"); + return 0; +} + +static void ipw_remove_current_network(struct ipw_priv *priv) +{ + struct list_head *element, *safe; + struct ieee80211_network *network = NULL; + list_for_each_safe(element, safe, &priv->ieee->network_list) { + network = list_entry(element, struct ieee80211_network, list); + if (!memcmp(network->bssid, priv->bssid, ETH_ALEN)) { + list_del(element); + list_add_tail(&network->list, + &priv->ieee->network_free_list); + } + } +} + +/** + * Check that card is still alive. + * Reads debug register from domain0. + * If card is present, pre-defined value should + * be found there. + * + * @param priv + * @return 1 if card is present, 0 otherwise + */ +static inline int ipw_alive(struct ipw_priv *priv) +{ + return ipw_read32(priv, 0x90) == 0xd55555d5; +} + +static inline int ipw_poll_bit(struct ipw_priv *priv, u32 addr, u32 mask, + int timeout) +{ + int i = 0; + + do { + if ((ipw_read32(priv, addr) & mask) == mask) + return i; + mdelay(10); + i += 10; + } while (i < timeout); + + return -ETIME; +} + +/* These functions load the firmware and micro code for the operation of + * the ipw hardware. It assumes the buffer has all the bits for the + * image and the caller is handling the memory allocation and clean up. + */ + +static int ipw_stop_master(struct ipw_priv *priv) +{ + int rc; + + IPW_DEBUG_TRACE(">> \n"); + /* stop master. typical delay - 0 */ + ipw_set_bit(priv, CX2_RESET_REG, CX2_RESET_REG_STOP_MASTER); + + rc = ipw_poll_bit(priv, CX2_RESET_REG, + CX2_RESET_REG_MASTER_DISABLED, 100); + if (rc < 0) { + IPW_ERROR("stop master failed in 10ms\n"); + return -1; + } + + IPW_DEBUG_INFO("stop master %dms\n", rc); + + return rc; +} + +static void ipw_arc_release(struct ipw_priv *priv) +{ + IPW_DEBUG_TRACE(">> \n"); + mdelay(5); + + ipw_clear_bit(priv, CX2_RESET_REG, CBD_RESET_REG_PRINCETON_RESET); + + /* no one knows timing, for safety add some delay */ + mdelay(5); +} + +struct fw_header { + u32 version; + u32 mode; +}; + +struct fw_chunk { + u32 address; + u32 length; +}; + +#define IPW_FW_MAJOR_VERSION 2 +#define IPW_FW_MINOR_VERSION 2 + +#define IPW_FW_MINOR(x) ((x & 0xff) >> 8) +#define IPW_FW_MAJOR(x) (x & 0xff) + +#define IPW_FW_VERSION ((IPW_FW_MINOR_VERSION << 8) | \ + IPW_FW_MAJOR_VERSION) + +#define IPW_FW_PREFIX "ipw-" __stringify(IPW_FW_MAJOR_VERSION) \ +"." __stringify(IPW_FW_MINOR_VERSION) "-" + +#if IPW_FW_MAJOR_VERSION >= 2 && IPW_FW_MINOR_VERSION > 0 +#define IPW_FW_NAME(x) IPW_FW_PREFIX "" x ".fw" +#else +#define IPW_FW_NAME(x) "ipw2200_" x ".fw" +#endif + +static int ipw_load_ucode(struct ipw_priv *priv, u8 * data, size_t len) +{ + int rc = 0, i, addr; + u8 cr = 0; + u16 *image; + + image = (u16 *) data; + + IPW_DEBUG_TRACE(">> \n"); + + rc = ipw_stop_master(priv); + + if (rc < 0) + return rc; + +// spin_lock_irqsave(&priv->lock, flags); + + for (addr = CX2_SHARED_LOWER_BOUND; + addr < CX2_REGISTER_DOMAIN1_END; addr += 4) { + ipw_write32(priv, addr, 0); + } + + /* no ucode (yet) */ + memset(&priv->dino_alive, 0, sizeof(priv->dino_alive)); + /* destroy DMA queues */ + /* reset sequence */ + + ipw_write_reg32(priv, CX2_MEM_HALT_AND_RESET, CX2_BIT_HALT_RESET_ON); + ipw_arc_release(priv); + ipw_write_reg32(priv, CX2_MEM_HALT_AND_RESET, CX2_BIT_HALT_RESET_OFF); + mdelay(1); + + /* reset PHY */ + ipw_write_reg32(priv, CX2_INTERNAL_CMD_EVENT, CX2_BASEBAND_POWER_DOWN); + mdelay(1); + + ipw_write_reg32(priv, CX2_INTERNAL_CMD_EVENT, 0); + mdelay(1); + + /* enable ucode store */ + ipw_write_reg8(priv, DINO_CONTROL_REG, 0x0); + ipw_write_reg8(priv, DINO_CONTROL_REG, DINO_ENABLE_CS); + mdelay(1); + + /* write ucode */ + /** + * @bug + * Do NOT set indirect address register once and then + * store data to indirect data register in the loop. + * It seems very reasonable, but in this case DINO do not + * accept ucode. It is essential to set address each time. + */ + /* load new ipw uCode */ + for (i = 0; i < len / 2; i++) + ipw_write_reg16(priv, CX2_BASEBAND_CONTROL_STORE, image[i]); + + /* enable DINO */ + ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS, 0); + ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS, DINO_ENABLE_SYSTEM); + + /* this is where the igx / win driver deveates from the VAP driver. */ + + /* wait for alive response */ + for (i = 0; i < 100; i++) { + /* poll for incoming data */ + cr = ipw_read_reg8(priv, CX2_BASEBAND_CONTROL_STATUS); + if (cr & DINO_RXFIFO_DATA) + break; + mdelay(1); + } + + if (cr & DINO_RXFIFO_DATA) { + /* alive_command_responce size is NOT multiple of 4 */ + u32 response_buffer[(sizeof(priv->dino_alive) + 3) / 4]; + + for (i = 0; i < ARRAY_SIZE(response_buffer); i++) + response_buffer[i] = + ipw_read_reg32(priv, CX2_BASEBAND_RX_FIFO_READ); + memcpy(&priv->dino_alive, response_buffer, + sizeof(priv->dino_alive)); + if (priv->dino_alive.alive_command == 1 + && priv->dino_alive.ucode_valid == 1) { + rc = 0; + IPW_DEBUG_INFO + ("Microcode OK, rev. %d (0x%x) dev. %d (0x%x) " + "of %02d/%02d/%02d %02d:%02d\n", + priv->dino_alive.software_revision, + priv->dino_alive.software_revision, + priv->dino_alive.device_identifier, + priv->dino_alive.device_identifier, + priv->dino_alive.time_stamp[0], + priv->dino_alive.time_stamp[1], + priv->dino_alive.time_stamp[2], + priv->dino_alive.time_stamp[3], + priv->dino_alive.time_stamp[4]); + } else { + IPW_DEBUG_INFO("Microcode is not alive\n"); + rc = -EINVAL; + } + } else { + IPW_DEBUG_INFO("No alive response from DINO\n"); + rc = -ETIME; + } + + /* disable DINO, otherwise for some reason + firmware have problem getting alive resp. */ + ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS, 0); + +// spin_unlock_irqrestore(&priv->lock, flags); + + return rc; +} + +static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len) +{ + int rc = -1; + int offset = 0; + struct fw_chunk *chunk; + dma_addr_t shared_phys; + u8 *shared_virt; + + IPW_DEBUG_TRACE("<< : \n"); + shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys); + + if (!shared_virt) + return -ENOMEM; + + memmove(shared_virt, data, len); + + /* Start the Dma */ + rc = ipw_fw_dma_enable(priv); + + if (priv->sram_desc.last_cb_index > 0) { + /* the DMA is already ready this would be a bug. */ + BUG(); + goto out; + } + + do { + chunk = (struct fw_chunk *)(data + offset); + offset += sizeof(struct fw_chunk); + /* build DMA packet and queue up for sending */ + /* dma to chunk->address, the chunk->length bytes from data + + * offeset*/ + /* Dma loading */ + rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset, + chunk->address, chunk->length); + if (rc) { + IPW_DEBUG_INFO("dmaAddBuffer Failed\n"); + goto out; + } + + offset += chunk->length; + } while (offset < len); + + /* Run the DMA and wait for the answer */ + rc = ipw_fw_dma_kick(priv); + if (rc) { + IPW_ERROR("dmaKick Failed\n"); + goto out; + } + + rc = ipw_fw_dma_wait(priv); + if (rc) { + IPW_ERROR("dmaWaitSync Failed\n"); + goto out; + } + out: + pci_free_consistent(priv->pci_dev, len, shared_virt, shared_phys); + return rc; +} + +/* stop nic */ +static int ipw_stop_nic(struct ipw_priv *priv) +{ + int rc = 0; + + /* stop */ + ipw_write32(priv, CX2_RESET_REG, CX2_RESET_REG_STOP_MASTER); + + rc = ipw_poll_bit(priv, CX2_RESET_REG, + CX2_RESET_REG_MASTER_DISABLED, 500); + if (rc < 0) { + IPW_ERROR("wait for reg master disabled failed\n"); + return rc; + } + + ipw_set_bit(priv, CX2_RESET_REG, CBD_RESET_REG_PRINCETON_RESET); + + return rc; +} + +static void ipw_start_nic(struct ipw_priv *priv) +{ + IPW_DEBUG_TRACE(">>\n"); + + /* prvHwStartNic release ARC */ + ipw_clear_bit(priv, CX2_RESET_REG, + CX2_RESET_REG_MASTER_DISABLED | + CX2_RESET_REG_STOP_MASTER | + CBD_RESET_REG_PRINCETON_RESET); + + /* enable power management */ + ipw_set_bit(priv, CX2_GP_CNTRL_RW, + CX2_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); + + IPW_DEBUG_TRACE("<<\n"); +} + +static int ipw_init_nic(struct ipw_priv *priv) +{ + int rc; + + IPW_DEBUG_TRACE(">>\n"); + /* reset */ + /*prvHwInitNic */ + /* set "initialization complete" bit to move adapter to D0 state */ + ipw_set_bit(priv, CX2_GP_CNTRL_RW, CX2_GP_CNTRL_BIT_INIT_DONE); + + /* low-level PLL activation */ + ipw_write32(priv, CX2_READ_INT_REGISTER, + CX2_BIT_INT_HOST_SRAM_READ_INT_REGISTER); + + /* wait for clock stabilization */ + rc = ipw_poll_bit(priv, CX2_GP_CNTRL_RW, + CX2_GP_CNTRL_BIT_CLOCK_READY, 250); + if (rc < 0) + IPW_DEBUG_INFO("FAILED wait for clock stablization\n"); + + /* assert SW reset */ + ipw_set_bit(priv, CX2_RESET_REG, CX2_RESET_REG_SW_RESET); + + udelay(10); + + /* set "initialization complete" bit to move adapter to D0 state */ + ipw_set_bit(priv, CX2_GP_CNTRL_RW, CX2_GP_CNTRL_BIT_INIT_DONE); + + IPW_DEBUG_TRACE(">>\n"); + return 0; +} + +/* Call this function from process context, it will sleep in request_firmware. + * Probe is an ok place to call this from. + */ +static int ipw_reset_nic(struct ipw_priv *priv) +{ + int rc = 0; + + IPW_DEBUG_TRACE(">>\n"); + + rc = ipw_init_nic(priv); + + /* Clear the 'host command active' bit... */ + priv->status &= ~STATUS_HCMD_ACTIVE; + wake_up_interruptible(&priv->wait_command_queue); + + IPW_DEBUG_TRACE("<<\n"); + return rc; +} + +static int ipw_get_fw(struct ipw_priv *priv, + const struct firmware **fw, const char *name) +{ + struct fw_header *header; + int rc; + + /* ask firmware_class module to get the boot firmware off disk */ + rc = request_firmware(fw, name, &priv->pci_dev->dev); + if (rc < 0) { + IPW_ERROR("%s load failed: Reason %d\n", name, rc); + return rc; + } + + header = (struct fw_header *)(*fw)->data; + if (IPW_FW_MAJOR(header->version) != IPW_FW_MAJOR_VERSION) { + IPW_ERROR("'%s' firmware version not compatible (%d != %d)\n", + name, + IPW_FW_MAJOR(header->version), IPW_FW_MAJOR_VERSION); + return -EINVAL; + } + + IPW_DEBUG_INFO("Loading firmware '%s' file v%d.%d (%zd bytes)\n", + name, + IPW_FW_MAJOR(header->version), + IPW_FW_MINOR(header->version), + (*fw)->size - sizeof(struct fw_header)); + return 0; +} + +#define CX2_RX_BUF_SIZE (3000) + +static inline void ipw_rx_queue_reset(struct ipw_priv *priv, + struct ipw_rx_queue *rxq) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&rxq->lock, flags); + + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, rxq->pool[i].dma_addr, + CX2_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->processed = RX_QUEUE_SIZE - 1; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} + +#ifdef CONFIG_PM +static int fw_loaded = 0; +static const struct firmware *bootfw = NULL; +static const struct firmware *firmware = NULL; +static const struct firmware *ucode = NULL; +#endif + +static int ipw_load(struct ipw_priv *priv) +{ +#ifndef CONFIG_PM + const struct firmware *bootfw = NULL; + const struct firmware *firmware = NULL; + const struct firmware *ucode = NULL; +#endif + int rc = 0, retries = 3; + +#ifdef CONFIG_PM + if (!fw_loaded) { +#endif + rc = ipw_get_fw(priv, &bootfw, IPW_FW_NAME("boot")); + if (rc) + goto error; + + switch (priv->ieee->iw_mode) { + case IW_MODE_ADHOC: + rc = ipw_get_fw(priv, &ucode, + IPW_FW_NAME("ibss_ucode")); + if (rc) + goto error; + + rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("ibss")); + break; + +#ifdef CONFIG_IPW_PROMISC + case IW_MODE_MONITOR: + rc = ipw_get_fw(priv, &ucode, + IPW_FW_NAME("ibss_ucode")); + if (rc) + goto error; + + rc = ipw_get_fw(priv, &firmware, + IPW_FW_NAME("sniffer")); + break; +#endif + case IW_MODE_INFRA: + rc = ipw_get_fw(priv, &ucode, IPW_FW_NAME("bss_ucode")); + if (rc) + goto error; + + rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("bss")); + break; + + default: + rc = -EINVAL; + } + + if (rc) + goto error; + +#ifdef CONFIG_PM + fw_loaded = 1; + } +#endif + + if (!priv->rxq) + priv->rxq = ipw_rx_queue_alloc(priv); + else + ipw_rx_queue_reset(priv, priv->rxq); + if (!priv->rxq) { + IPW_ERROR("Unable to initialize Rx queue\n"); + goto error; + } + + retry: + /* Ensure interrupts are disabled */ + ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL); + priv->status &= ~STATUS_INT_ENABLED; + + /* ack pending interrupts */ + ipw_write32(priv, CX2_INTA_RW, CX2_INTA_MASK_ALL); + + ipw_stop_nic(priv); + + rc = ipw_reset_nic(priv); + if (rc) { + IPW_ERROR("Unable to reset NIC\n"); + goto error; + } + + ipw_zero_memory(priv, CX2_NIC_SRAM_LOWER_BOUND, + CX2_NIC_SRAM_UPPER_BOUND - CX2_NIC_SRAM_LOWER_BOUND); + + /* DMA the initial boot firmware into the device */ + rc = ipw_load_firmware(priv, bootfw->data + sizeof(struct fw_header), + bootfw->size - sizeof(struct fw_header)); + if (rc < 0) { + IPW_ERROR("Unable to load boot firmware\n"); + goto error; + } + + /* kick start the device */ + ipw_start_nic(priv); + + /* wait for the device to finish it's initial startup sequence */ + rc = ipw_poll_bit(priv, CX2_INTA_RW, + CX2_INTA_BIT_FW_INITIALIZATION_DONE, 500); + if (rc < 0) { + IPW_ERROR("device failed to boot initial fw image\n"); + goto error; + } + IPW_DEBUG_INFO("initial device response after %dms\n", rc); + + /* ack fw init done interrupt */ + ipw_write32(priv, CX2_INTA_RW, CX2_INTA_BIT_FW_INITIALIZATION_DONE); + + /* DMA the ucode into the device */ + rc = ipw_load_ucode(priv, ucode->data + sizeof(struct fw_header), + ucode->size - sizeof(struct fw_header)); + if (rc < 0) { + IPW_ERROR("Unable to load ucode\n"); + goto error; + } + + /* stop nic */ + ipw_stop_nic(priv); + + /* DMA bss firmware into the device */ + rc = ipw_load_firmware(priv, firmware->data + + sizeof(struct fw_header), + firmware->size - sizeof(struct fw_header)); + if (rc < 0) { + IPW_ERROR("Unable to load firmware\n"); + goto error; + } + + ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 0); + + rc = ipw_queue_reset(priv); + if (rc) { + IPW_ERROR("Unable to initialize queues\n"); + goto error; + } + + /* Ensure interrupts are disabled */ + ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL); + + /* kick start the device */ + ipw_start_nic(priv); + + if (ipw_read32(priv, CX2_INTA_RW) & CX2_INTA_BIT_PARITY_ERROR) { + if (retries > 0) { + IPW_WARNING("Parity error. Retrying init.\n"); + retries--; + goto retry; + } + + IPW_ERROR("TODO: Handle parity error -- schedule restart?\n"); + rc = -EIO; + goto error; + } + + /* wait for the device */ + rc = ipw_poll_bit(priv, CX2_INTA_RW, + CX2_INTA_BIT_FW_INITIALIZATION_DONE, 500); + if (rc < 0) { + IPW_ERROR("device failed to start after 500ms\n"); + goto error; + } + IPW_DEBUG_INFO("device response after %dms\n", rc); + + /* ack fw init done interrupt */ + ipw_write32(priv, CX2_INTA_RW, CX2_INTA_BIT_FW_INITIALIZATION_DONE); + + /* read eeprom data and initialize the eeprom region of sram */ + priv->eeprom_delay = 1; + ipw_eeprom_init_sram(priv); + + /* enable interrupts */ + ipw_enable_interrupts(priv); + + /* Ensure our queue has valid packets */ + ipw_rx_queue_replenish(priv); + + ipw_write32(priv, CX2_RX_READ_INDEX, priv->rxq->read); + + /* ack pending interrupts */ + ipw_write32(priv, CX2_INTA_RW, CX2_INTA_MASK_ALL); + +#ifndef CONFIG_PM + release_firmware(bootfw); + release_firmware(ucode); + release_firmware(firmware); +#endif + return 0; + + error: + if (priv->rxq) { + ipw_rx_queue_free(priv, priv->rxq); + priv->rxq = NULL; + } + ipw_tx_queue_free(priv); + if (bootfw) + release_firmware(bootfw); + if (ucode) + release_firmware(ucode); + if (firmware) + release_firmware(firmware); +#ifdef CONFIG_PM + fw_loaded = 0; + bootfw = ucode = firmware = NULL; +#endif + + return rc; +} + +/** + * DMA services + * + * Theory of operation + * + * A queue is a circular buffers with 'Read' and 'Write' pointers. + * 2 empty entries always kept in the buffer to protect from overflow. + * + * For Tx queue, there are low mark and high mark limits. If, after queuing + * the packet for Tx, free space become < low mark, Tx queue stopped. When + * reclaiming packets (on 'tx done IRQ), if free space become > high mark, + * Tx queue resumed. + * + * The IPW operates with six queues, one receive queue in the device's + * sram, one transmit queue for sending commands to the device firmware, + * and four transmit queues for data. + * + * The four transmit queues allow for performing quality of service (qos) + * transmissions as per the 802.11 protocol. Currently Linux does not + * provide a mechanism to the user for utilizing prioritized queues, so + * we only utilize the first data transmit queue (queue1). + */ + +/** + * Driver allocates buffers of this size for Rx + */ + +static inline int ipw_queue_space(const struct clx2_queue *q) +{ + int s = q->last_used - q->first_empty; + if (s <= 0) + s += q->n_bd; + s -= 2; /* keep some reserve to not confuse empty and full situations */ + if (s < 0) + s = 0; + return s; +} + +static inline int ipw_queue_inc_wrap(int index, int n_bd) +{ + return (++index == n_bd) ? 0 : index; +} + +/** + * Initialize common DMA queue structure + * + * @param q queue to init + * @param count Number of BD's to allocate. Should be power of 2 + * @param read_register Address for 'read' register + * (not offset within BAR, full address) + * @param write_register Address for 'write' register + * (not offset within BAR, full address) + * @param base_register Address for 'base' register + * (not offset within BAR, full address) + * @param size Address for 'size' register + * (not offset within BAR, full address) + */ +static void ipw_queue_init(struct ipw_priv *priv, struct clx2_queue *q, + int count, u32 read, u32 write, u32 base, u32 size) +{ + q->n_bd = count; + + q->low_mark = q->n_bd / 4; + if (q->low_mark < 4) + q->low_mark = 4; + + q->high_mark = q->n_bd / 8; + if (q->high_mark < 2) + q->high_mark = 2; + + q->first_empty = q->last_used = 0; + q->reg_r = read; + q->reg_w = write; + + ipw_write32(priv, base, q->dma_addr); + ipw_write32(priv, size, count); + ipw_write32(priv, read, 0); + ipw_write32(priv, write, 0); + + _ipw_read32(priv, 0x90); +} + +static int ipw_queue_tx_init(struct ipw_priv *priv, + struct clx2_tx_queue *q, + int count, u32 read, u32 write, u32 base, u32 size) +{ + struct pci_dev *dev = priv->pci_dev; + + q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL); + if (!q->txb) { + IPW_ERROR("vmalloc for auxilary BD structures failed\n"); + return -ENOMEM; + } + + q->bd = + pci_alloc_consistent(dev, sizeof(q->bd[0]) * count, &q->q.dma_addr); + if (!q->bd) { + IPW_ERROR("pci_alloc_consistent(%zd) failed\n", + sizeof(q->bd[0]) * count); + kfree(q->txb); + q->txb = NULL; + return -ENOMEM; + } + + ipw_queue_init(priv, &q->q, count, read, write, base, size); + return 0; +} + +/** + * Free one TFD, those at index [txq->q.last_used]. + * Do NOT advance any indexes + * + * @param dev + * @param txq + */ +static void ipw_queue_tx_free_tfd(struct ipw_priv *priv, + struct clx2_tx_queue *txq) +{ + struct tfd_frame *bd = &txq->bd[txq->q.last_used]; + struct pci_dev *dev = priv->pci_dev; + int i; + + /* classify bd */ + if (bd->control_flags.message_type == TX_HOST_COMMAND_TYPE) + /* nothing to cleanup after for host commands */ + return; + + /* sanity check */ + if (bd->u.data.num_chunks > NUM_TFD_CHUNKS) { + IPW_ERROR("Too many chunks: %i\n", bd->u.data.num_chunks); + /** @todo issue fatal error, it is quite serious situation */ + return; + } + + /* unmap chunks if any */ + for (i = 0; i < bd->u.data.num_chunks; i++) { + pci_unmap_single(dev, bd->u.data.chunk_ptr[i], + bd->u.data.chunk_len[i], PCI_DMA_TODEVICE); + if (txq->txb[txq->q.last_used]) { + ieee80211_txb_free(txq->txb[txq->q.last_used]); + txq->txb[txq->q.last_used] = NULL; + } + } +} + +/** + * Deallocate DMA queue. + * + * Empty queue by removing and destroying all BD's. + * Free all buffers. + * + * @param dev + * @param q + */ +static void ipw_queue_tx_free(struct ipw_priv *priv, struct clx2_tx_queue *txq) +{ + struct clx2_queue *q = &txq->q; + struct pci_dev *dev = priv->pci_dev; + + if (q->n_bd == 0) + return; + + /* first, empty all BD's */ + for (; q->first_empty != q->last_used; + q->last_used = ipw_queue_inc_wrap(q->last_used, q->n_bd)) { + ipw_queue_tx_free_tfd(priv, txq); + } + + /* free buffers belonging to queue itself */ + pci_free_consistent(dev, sizeof(txq->bd[0]) * q->n_bd, txq->bd, + q->dma_addr); + kfree(txq->txb); + + /* 0 fill whole structure */ + memset(txq, 0, sizeof(*txq)); +} + +/** + * Destroy all DMA queues and structures + * + * @param priv + */ +static void ipw_tx_queue_free(struct ipw_priv *priv) +{ + /* Tx CMD queue */ + ipw_queue_tx_free(priv, &priv->txq_cmd); + + /* Tx queues */ + ipw_queue_tx_free(priv, &priv->txq[0]); + ipw_queue_tx_free(priv, &priv->txq[1]); + ipw_queue_tx_free(priv, &priv->txq[2]); + ipw_queue_tx_free(priv, &priv->txq[3]); +} + +static void inline __maybe_wake_tx(struct ipw_priv *priv) +{ + if (netif_running(priv->net_dev)) { + switch (priv->port_type) { + case DCR_TYPE_MU_BSS: + case DCR_TYPE_MU_IBSS: + if (!(priv->status & STATUS_ASSOCIATED)) { + return; + } + } + netif_wake_queue(priv->net_dev); + } + +} + +static inline void ipw_create_bssid(struct ipw_priv *priv, u8 * bssid) +{ + /* First 3 bytes are manufacturer */ + bssid[0] = priv->mac_addr[0]; + bssid[1] = priv->mac_addr[1]; + bssid[2] = priv->mac_addr[2]; + + /* Last bytes are random */ + get_random_bytes(&bssid[3], ETH_ALEN - 3); + + bssid[0] &= 0xfe; /* clear multicast bit */ + bssid[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + +static inline u8 ipw_add_station(struct ipw_priv *priv, u8 * bssid) +{ + struct ipw_station_entry entry; + int i; + + for (i = 0; i < priv->num_stations; i++) { + if (!memcmp(priv->stations[i], bssid, ETH_ALEN)) { + /* Another node is active in network */ + priv->missed_adhoc_beacons = 0; + if (!(priv->config & CFG_STATIC_CHANNEL)) + /* when other nodes drop out, we drop out */ + priv->config &= ~CFG_ADHOC_PERSIST; + + return i; + } + } + + if (i == MAX_STATIONS) + return IPW_INVALID_STATION; + + IPW_DEBUG_SCAN("Adding AdHoc station: " MAC_FMT "\n", MAC_ARG(bssid)); + + entry.reserved = 0; + entry.support_mode = 0; + memcpy(entry.mac_addr, bssid, ETH_ALEN); + memcpy(priv->stations[i], bssid, ETH_ALEN); + ipw_write_direct(priv, IPW_STATION_TABLE_LOWER + i * sizeof(entry), + &entry, sizeof(entry)); + priv->num_stations++; + + return i; +} + +static inline u8 ipw_find_station(struct ipw_priv *priv, u8 * bssid) +{ + int i; + + for (i = 0; i < priv->num_stations; i++) + if (!memcmp(priv->stations[i], bssid, ETH_ALEN)) + return i; + + return IPW_INVALID_STATION; +} + +static void ipw_send_disassociate(struct ipw_priv *priv, int quiet) +{ + int err; + + if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED))) { + IPW_DEBUG_ASSOC("Disassociating while not associated.\n"); + return; + } + + IPW_DEBUG_ASSOC("Disassocation attempt from " MAC_FMT " " + "on channel %d.\n", + MAC_ARG(priv->assoc_request.bssid), + priv->assoc_request.channel); + + priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); + priv->status |= STATUS_DISASSOCIATING; + + if (quiet) + priv->assoc_request.assoc_type = HC_DISASSOC_QUIET; + else + priv->assoc_request.assoc_type = HC_DISASSOCIATE; + err = ipw_send_associate(priv, &priv->assoc_request); + if (err) { + IPW_DEBUG_HC("Attempt to send [dis]associate command " + "failed.\n"); + return; + } + +} + +static void ipw_disassociate(void *data) +{ + ipw_send_disassociate(data, 0); +} + +static void notify_wx_assoc_event(struct ipw_priv *priv) +{ + union iwreq_data wrqu; + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + if (priv->status & STATUS_ASSOCIATED) + memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); + else + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); +} + +struct ipw_status_code { + u16 status; + const char *reason; +}; + +static const struct ipw_status_code ipw_status_codes[] = { + {0x00, "Successful"}, + {0x01, "Unspecified failure"}, + {0x0A, "Cannot support all requested capabilities in the " + "Capability information field"}, + {0x0B, "Reassociation denied due to inability to confirm that " + "association exists"}, + {0x0C, "Association denied due to reason outside the scope of this " + "standard"}, + {0x0D, + "Responding station does not support the specified authentication " + "algorithm"}, + {0x0E, + "Received an Authentication frame with authentication sequence " + "transaction sequence number out of expected sequence"}, + {0x0F, "Authentication rejected because of challenge failure"}, + {0x10, "Authentication rejected due to timeout waiting for next " + "frame in sequence"}, + {0x11, "Association denied because AP is unable to handle additional " + "associated stations"}, + {0x12, + "Association denied due to requesting station not supporting all " + "of the datarates in the BSSBasicServiceSet Parameter"}, + {0x13, + "Association denied due to requesting station not supporting " + "short preamble operation"}, + {0x14, + "Association denied due to requesting station not supporting " + "PBCC encoding"}, + {0x15, + "Association denied due to requesting station not supporting " + "channel agility"}, + {0x19, + "Association denied due to requesting station not supporting " + "short slot operation"}, + {0x1A, + "Association denied due to requesting station not supporting " + "DSSS-OFDM operation"}, + {0x28, "Invalid Information Element"}, + {0x29, "Group Cipher is not valid"}, + {0x2A, "Pairwise Cipher is not valid"}, + {0x2B, "AKMP is not valid"}, + {0x2C, "Unsupported RSN IE version"}, + {0x2D, "Invalid RSN IE Capabilities"}, + {0x2E, "Cipher suite is rejected per security policy"}, +}; + +#ifdef CONFIG_IPW_DEBUG +static const char *ipw_get_status_code(u16 status) +{ + int i; + for (i = 0; i < ARRAY_SIZE(ipw_status_codes); i++) + if (ipw_status_codes[i].status == status) + return ipw_status_codes[i].reason; + return "Unknown status value."; +} +#endif + +static void inline average_init(struct average *avg) +{ + memset(avg, 0, sizeof(*avg)); +} + +static void inline average_add(struct average *avg, s16 val) +{ + avg->sum -= avg->entries[avg->pos]; + avg->sum += val; + avg->entries[avg->pos++] = val; + if (unlikely(avg->pos == AVG_ENTRIES)) { + avg->init = 1; + avg->pos = 0; + } +} + +static s16 inline average_value(struct average *avg) +{ + if (!unlikely(avg->init)) { + if (avg->pos) + return avg->sum / avg->pos; + return 0; + } + + return avg->sum / AVG_ENTRIES; +} + +static void ipw_reset_stats(struct ipw_priv *priv) +{ + u32 len = sizeof(u32); + + priv->quality = 0; + + average_init(&priv->average_missed_beacons); + average_init(&priv->average_rssi); + average_init(&priv->average_noise); + + priv->last_rate = 0; + priv->last_missed_beacons = 0; + priv->last_rx_packets = 0; + priv->last_tx_packets = 0; + priv->last_tx_failures = 0; + + /* Firmware managed, reset only when NIC is restarted, so we have to + * normalize on the current value */ + ipw_get_ordinal(priv, IPW_ORD_STAT_RX_ERR_CRC, + &priv->last_rx_err, &len); + ipw_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURE, + &priv->last_tx_failures, &len); + + /* Driver managed, reset with each association */ + priv->missed_adhoc_beacons = 0; + priv->missed_beacons = 0; + priv->tx_packets = 0; + priv->rx_packets = 0; + +} + +static inline u32 ipw_get_max_rate(struct ipw_priv *priv) +{ + u32 i = 0x80000000; + u32 mask = priv->rates_mask; + /* If currently associated in B mode, restrict the maximum + * rate match to B rates */ + if (priv->assoc_request.ieee_mode == IPW_B_MODE) + mask &= IEEE80211_CCK_RATES_MASK; + + /* TODO: Verify that the rate is supported by the current rates + * list. */ + + while (i && !(mask & i)) + i >>= 1; + switch (i) { + case IEEE80211_CCK_RATE_1MB_MASK: return 1000000; + case IEEE80211_CCK_RATE_2MB_MASK: return 2000000; + case IEEE80211_CCK_RATE_5MB_MASK: return 5500000; + case IEEE80211_OFDM_RATE_6MB_MASK: return 6000000; + case IEEE80211_OFDM_RATE_9MB_MASK: return 9000000; + case IEEE80211_CCK_RATE_11MB_MASK: return 11000000; + case IEEE80211_OFDM_RATE_12MB_MASK: return 12000000; + case IEEE80211_OFDM_RATE_18MB_MASK: return 18000000; + case IEEE80211_OFDM_RATE_24MB_MASK: return 24000000; + case IEEE80211_OFDM_RATE_36MB_MASK: return 36000000; + case IEEE80211_OFDM_RATE_48MB_MASK: return 48000000; + case IEEE80211_OFDM_RATE_54MB_MASK: return 54000000; + } + + if (priv->ieee->mode == IEEE_B) + return 11000000; + else + return 54000000; +} + +static u32 ipw_get_current_rate(struct ipw_priv *priv) +{ + u32 rate, len = sizeof(rate); + int err; + + if (!(priv->status & STATUS_ASSOCIATED)) + return 0; + + if (priv->tx_packets > IPW_REAL_RATE_RX_PACKET_THRESHOLD) { + err = ipw_get_ordinal(priv, IPW_ORD_STAT_TX_CURR_RATE, &rate, + &len); + if (err) { + IPW_DEBUG_INFO("failed querying ordinals.\n"); + return 0; + } + } else + return ipw_get_max_rate(priv); + + switch (rate) { + case IPW_TX_RATE_1MB: return 1000000; + case IPW_TX_RATE_2MB: return 2000000; + case IPW_TX_RATE_5MB: return 5500000; + case IPW_TX_RATE_6MB: return 6000000; + case IPW_TX_RATE_9MB: return 9000000; + case IPW_TX_RATE_11MB: return 11000000; + case IPW_TX_RATE_12MB: return 12000000; + case IPW_TX_RATE_18MB: return 18000000; + case IPW_TX_RATE_24MB: return 24000000; + case IPW_TX_RATE_36MB: return 36000000; + case IPW_TX_RATE_48MB: return 48000000; + case IPW_TX_RATE_54MB: return 54000000; + } + + return 0; +} + +#define PERFECT_RSSI (-50) +#define WORST_RSSI (-85) +#define IPW_STATS_INTERVAL (2 * HZ) +static void ipw_gather_stats(struct ipw_priv *priv) +{ + u32 rx_err, rx_err_delta, rx_packets_delta; + u32 tx_failures, tx_failures_delta, tx_packets_delta; + u32 missed_beacons_percent, missed_beacons_delta; + u32 quality = 0; + u32 len = sizeof(u32); + s16 rssi; + u32 beacon_quality, signal_quality, tx_quality, rx_quality, + rate_quality; + + if (!(priv->status & STATUS_ASSOCIATED)) { + priv->quality = 0; + return; + } + + /* Update the statistics */ + ipw_get_ordinal(priv, IPW_ORD_STAT_MISSED_BEACONS, + &priv->missed_beacons, &len); + missed_beacons_delta = priv->missed_beacons - priv->last_missed_beacons; + priv->last_missed_beacons = priv->missed_beacons; + if (priv->assoc_request.beacon_interval) { + missed_beacons_percent = missed_beacons_delta * + (HZ * priv->assoc_request.beacon_interval) / + (IPW_STATS_INTERVAL * 10); + } else { + missed_beacons_percent = 0; + } + average_add(&priv->average_missed_beacons, missed_beacons_percent); + + ipw_get_ordinal(priv, IPW_ORD_STAT_RX_ERR_CRC, &rx_err, &len); + rx_err_delta = rx_err - priv->last_rx_err; + priv->last_rx_err = rx_err; + + ipw_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURE, &tx_failures, &len); + tx_failures_delta = tx_failures - priv->last_tx_failures; + priv->last_tx_failures = tx_failures; + + rx_packets_delta = priv->rx_packets - priv->last_rx_packets; + priv->last_rx_packets = priv->rx_packets; + + tx_packets_delta = priv->tx_packets - priv->last_tx_packets; + priv->last_tx_packets = priv->tx_packets; + + /* Calculate quality based on the following: + * + * Missed beacon: 100% = 0, 0% = 70% missed + * Rate: 60% = 1Mbs, 100% = Max + * Rx and Tx errors represent a straight % of total Rx/Tx + * RSSI: 100% = > -50, 0% = < -80 + * Rx errors: 100% = 0, 0% = 50% missed + * + * The lowest computed quality is used. + * + */ +#define BEACON_THRESHOLD 5 + beacon_quality = 100 - missed_beacons_percent; + if (beacon_quality < BEACON_THRESHOLD) + beacon_quality = 0; + else + beacon_quality = (beacon_quality - BEACON_THRESHOLD) * 100 / + (100 - BEACON_THRESHOLD); + IPW_DEBUG_STATS("Missed beacon: %3d%% (%d%%)\n", + beacon_quality, missed_beacons_percent); + + priv->last_rate = ipw_get_current_rate(priv); + rate_quality = priv->last_rate * 40 / priv->last_rate + 60; + IPW_DEBUG_STATS("Rate quality : %3d%% (%dMbs)\n", + rate_quality, priv->last_rate / 1000000); + + if (rx_packets_delta > 100 && rx_packets_delta + rx_err_delta) + rx_quality = 100 - (rx_err_delta * 100) / + (rx_packets_delta + rx_err_delta); + else + rx_quality = 100; + IPW_DEBUG_STATS("Rx quality : %3d%% (%u errors, %u packets)\n", + rx_quality, rx_err_delta, rx_packets_delta); + + if (tx_packets_delta > 100 && tx_packets_delta + tx_failures_delta) + tx_quality = 100 - (tx_failures_delta * 100) / + (tx_packets_delta + tx_failures_delta); + else + tx_quality = 100; + IPW_DEBUG_STATS("Tx quality : %3d%% (%u errors, %u packets)\n", + tx_quality, tx_failures_delta, tx_packets_delta); + + rssi = average_value(&priv->average_rssi); + if (rssi > PERFECT_RSSI) + signal_quality = 100; + else if (rssi < WORST_RSSI) + signal_quality = 0; + else + signal_quality = (rssi - WORST_RSSI) * 100 / + (PERFECT_RSSI - WORST_RSSI); + IPW_DEBUG_STATS("Signal level : %3d%% (%d dBm)\n", + signal_quality, rssi); + + quality = min(beacon_quality, + min(rate_quality, + min(tx_quality, min(rx_quality, signal_quality)))); + if (quality == beacon_quality) + IPW_DEBUG_STATS("Quality (%d%%): Clamped to missed beacons.\n", + quality); + if (quality == rate_quality) + IPW_DEBUG_STATS("Quality (%d%%): Clamped to rate quality.\n", + quality); + if (quality == tx_quality) + IPW_DEBUG_STATS("Quality (%d%%): Clamped to Tx quality.\n", + quality); + if (quality == rx_quality) + IPW_DEBUG_STATS("Quality (%d%%): Clamped to Rx quality.\n", + quality); + if (quality == signal_quality) + IPW_DEBUG_STATS("Quality (%d%%): Clamped to signal quality.\n", + quality); + + priv->quality = quality; + + queue_delayed_work(priv->workqueue, &priv->gather_stats, + IPW_STATS_INTERVAL); +} + +/** + * Handle host notification packet. + * Called from interrupt routine + */ +static inline void ipw_rx_notification(struct ipw_priv *priv, + struct ipw_rx_notification *notif) +{ + IPW_DEBUG_NOTIF("type = %i (%d bytes)\n", notif->subtype, notif->size); + + switch (notif->subtype) { + case HOST_NOTIFICATION_STATUS_ASSOCIATED:{ + struct notif_association *assoc = ¬if->u.assoc; + + switch (assoc->state) { + case CMAS_ASSOCIATED:{ + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, + "associated: '%s' " MAC_FMT + " \n", + escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + + switch (priv->ieee->iw_mode) { + case IW_MODE_INFRA: + memcpy(priv->ieee->bssid, + priv->bssid, ETH_ALEN); + break; + + case IW_MODE_ADHOC: + memcpy(priv->ieee->bssid, + priv->bssid, ETH_ALEN); + + /* clear out the station table */ + priv->num_stations = 0; + + IPW_DEBUG_ASSOC + ("queueing adhoc check\n"); + queue_delayed_work(priv-> + workqueue, + &priv-> + adhoc_check, + priv-> + assoc_request. + beacon_interval); + break; + } + + priv->status &= ~STATUS_ASSOCIATING; + priv->status |= STATUS_ASSOCIATED; + + netif_carrier_on(priv->net_dev); + if (netif_queue_stopped(priv->net_dev)) { + IPW_DEBUG_NOTIF + ("waking queue\n"); + netif_wake_queue(priv->net_dev); + } else { + IPW_DEBUG_NOTIF + ("starting queue\n"); + netif_start_queue(priv-> + net_dev); + } + + ipw_reset_stats(priv); + /* Ensure the rate is updated immediately */ + priv->last_rate = + ipw_get_current_rate(priv); + schedule_work(&priv->gather_stats); + notify_wx_assoc_event(priv); + +/* queue_delayed_work(priv->workqueue, + &priv->request_scan, + SCAN_ASSOCIATED_INTERVAL); +*/ + break; + } + + case CMAS_AUTHENTICATED:{ + if (priv-> + status & (STATUS_ASSOCIATED | + STATUS_AUTH)) { +#ifdef CONFIG_IPW_DEBUG + struct notif_authenticate *auth + = ¬if->u.auth; + IPW_DEBUG(IPW_DL_NOTIF | + IPW_DL_STATE | + IPW_DL_ASSOC, + "deauthenticated: '%s' " + MAC_FMT + ": (0x%04X) - %s \n", + escape_essid(priv-> + essid, + priv-> + essid_len), + MAC_ARG(priv->bssid), + ntohs(auth->status), + ipw_get_status_code + (ntohs + (auth->status))); +#endif + + priv->status &= + ~(STATUS_ASSOCIATING | + STATUS_AUTH | + STATUS_ASSOCIATED); + + netif_carrier_off(priv-> + net_dev); + netif_stop_queue(priv->net_dev); + queue_work(priv->workqueue, + &priv->request_scan); + notify_wx_assoc_event(priv); + break; + } + + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, + "authenticated: '%s' " MAC_FMT + "\n", + escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + break; + } + + case CMAS_INIT:{ + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, + "disassociated: '%s' " MAC_FMT + " \n", + escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + + priv->status &= + ~(STATUS_DISASSOCIATING | + STATUS_ASSOCIATING | + STATUS_ASSOCIATED | STATUS_AUTH); + + netif_stop_queue(priv->net_dev); + if (!(priv->status & STATUS_ROAMING)) { + netif_carrier_off(priv-> + net_dev); + notify_wx_assoc_event(priv); + + /* Cancel any queued work ... */ + cancel_delayed_work(&priv-> + request_scan); + cancel_delayed_work(&priv-> + adhoc_check); + + /* Queue up another scan... */ + queue_work(priv->workqueue, + &priv->request_scan); + + cancel_delayed_work(&priv-> + gather_stats); + } else { + priv->status |= STATUS_ROAMING; + queue_work(priv->workqueue, + &priv->request_scan); + } + + ipw_reset_stats(priv); + break; + } + + default: + IPW_ERROR("assoc: unknown (%d)\n", + assoc->state); + break; + } + + break; + } + + case HOST_NOTIFICATION_STATUS_AUTHENTICATE:{ + struct notif_authenticate *auth = ¬if->u.auth; + switch (auth->state) { + case CMAS_AUTHENTICATED: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE, + "authenticated: '%s' " MAC_FMT " \n", + escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + priv->status |= STATUS_AUTH; + break; + + case CMAS_INIT: + if (priv->status & STATUS_AUTH) { + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, + "authentication failed (0x%04X): %s\n", + ntohs(auth->status), + ipw_get_status_code(ntohs + (auth-> + status))); + } + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, + "deauthenticated: '%s' " MAC_FMT "\n", + escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + + priv->status &= ~(STATUS_ASSOCIATING | + STATUS_AUTH | + STATUS_ASSOCIATED); + + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + queue_work(priv->workqueue, + &priv->request_scan); + notify_wx_assoc_event(priv); + break; + + case CMAS_TX_AUTH_SEQ_1: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_1\n"); + break; + case CMAS_RX_AUTH_SEQ_2: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_2\n"); + break; + case CMAS_AUTH_SEQ_1_PASS: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_1_PASS\n"); + break; + case CMAS_AUTH_SEQ_1_FAIL: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_1_FAIL\n"); + break; + case CMAS_TX_AUTH_SEQ_3: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_3\n"); + break; + case CMAS_RX_AUTH_SEQ_4: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "RX_AUTH_SEQ_4\n"); + break; + case CMAS_AUTH_SEQ_2_PASS: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUTH_SEQ_2_PASS\n"); + break; + case CMAS_AUTH_SEQ_2_FAIL: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "AUT_SEQ_2_FAIL\n"); + break; + case CMAS_TX_ASSOC: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "TX_ASSOC\n"); + break; + case CMAS_RX_ASSOC_RESP: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "RX_ASSOC_RESP\n"); + break; + case CMAS_ASSOCIATED: + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | + IPW_DL_ASSOC, "ASSOCIATED\n"); + break; + default: + IPW_DEBUG_NOTIF("auth: failure - %d\n", + auth->state); + break; + } + break; + } + + case HOST_NOTIFICATION_STATUS_SCAN_CHANNEL_RESULT:{ + struct notif_channel_result *x = + ¬if->u.channel_result; + + if (notif->size == sizeof(*x)) { + IPW_DEBUG_SCAN("Scan result for channel %d\n", + x->channel_num); + } else { + IPW_DEBUG_SCAN("Scan result of wrong size %d " + "(should be %zd)\n", + notif->size, sizeof(*x)); + } + break; + } + + case HOST_NOTIFICATION_STATUS_SCAN_COMPLETED:{ + struct notif_scan_complete *x = ¬if->u.scan_complete; + if (notif->size == sizeof(*x)) { + IPW_DEBUG_SCAN + ("Scan completed: type %d, %d channels, " + "%d status\n", x->scan_type, + x->num_channels, x->status); + } else { + IPW_ERROR("Scan completed of wrong size %d " + "(should be %zd)\n", + notif->size, sizeof(*x)); + } + + priv->status &= + ~(STATUS_SCANNING | STATUS_SCAN_ABORTING); + + cancel_delayed_work(&priv->scan_check); + + if (!(priv->status & (STATUS_ASSOCIATED | + STATUS_ASSOCIATING | + STATUS_ROAMING | + STATUS_DISASSOCIATING))) + queue_work(priv->workqueue, &priv->associate); + else if (priv->status & STATUS_ROAMING) { + /* If a scan completed and we are in roam mode, then + * the scan that completed was the one requested as a + * result of entering roam... so, schedule the + * roam work */ + queue_work(priv->workqueue, &priv->roam); + } else if (priv->status & STATUS_SCAN_PENDING) + queue_work(priv->workqueue, + &priv->request_scan); + + priv->ieee->scans++; + break; + } + + case HOST_NOTIFICATION_STATUS_FRAG_LENGTH:{ + struct notif_frag_length *x = ¬if->u.frag_len; + + if (notif->size == sizeof(*x)) { + IPW_ERROR("Frag length: %d\n", x->frag_length); + } else { + IPW_ERROR("Frag length of wrong size %d " + "(should be %zd)\n", + notif->size, sizeof(*x)); + } + break; + } + + case HOST_NOTIFICATION_STATUS_LINK_DETERIORATION:{ + struct notif_link_deterioration *x = + ¬if->u.link_deterioration; + if (notif->size == sizeof(*x)) { + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE, + "link deterioration: '%s' " MAC_FMT + " \n", escape_essid(priv->essid, + priv->essid_len), + MAC_ARG(priv->bssid)); + memcpy(&priv->last_link_deterioration, x, + sizeof(*x)); + } else { + IPW_ERROR("Link Deterioration of wrong size %d " + "(should be %zd)\n", + notif->size, sizeof(*x)); + } + break; + } + + case HOST_NOTIFICATION_DINO_CONFIG_RESPONSE:{ + IPW_ERROR("Dino config\n"); + if (priv->hcmd + && priv->hcmd->cmd == HOST_CMD_DINO_CONFIG) { + /* TODO: Do anything special? */ + } else { + IPW_ERROR("Unexpected DINO_CONFIG_RESPONSE\n"); + } + break; + } + + case HOST_NOTIFICATION_STATUS_BEACON_STATE:{ + struct notif_beacon_state *x = ¬if->u.beacon_state; + if (notif->size != sizeof(*x)) { + IPW_ERROR + ("Beacon state of wrong size %d (should " + "be %zd)\n", notif->size, sizeof(*x)); + break; + } + + if (x->state == HOST_NOTIFICATION_STATUS_BEACON_MISSING) { + if (priv->status & STATUS_SCANNING) { + /* Stop scan to keep fw from getting + * stuck... */ + queue_work(priv->workqueue, + &priv->abort_scan); + } + + if (x->number > priv->missed_beacon_threshold && + priv->status & STATUS_ASSOCIATED) { + IPW_DEBUG(IPW_DL_INFO | IPW_DL_NOTIF | + IPW_DL_STATE, + "Missed beacon: %d - disassociate\n", + x->number); + queue_work(priv->workqueue, + &priv->disassociate); + } else if (x->number > priv->roaming_threshold) { + IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE, + "Missed beacon: %d - initiate " + "roaming\n", x->number); + queue_work(priv->workqueue, + &priv->roam); + } else { + IPW_DEBUG_NOTIF("Missed beacon: %d\n", + x->number); + } + + priv->notif_missed_beacons = x->number; + + } + + break; + } + + case HOST_NOTIFICATION_STATUS_TGI_TX_KEY:{ + struct notif_tgi_tx_key *x = ¬if->u.tgi_tx_key; + if (notif->size == sizeof(*x)) { + IPW_ERROR("TGi Tx Key: state 0x%02x sec type " + "0x%02x station %d\n", + x->key_state, x->security_type, + x->station_index); + break; + } + + IPW_ERROR + ("TGi Tx Key of wrong size %d (should be %zd)\n", + notif->size, sizeof(*x)); + break; + } + + case HOST_NOTIFICATION_CALIB_KEEP_RESULTS:{ + struct notif_calibration *x = ¬if->u.calibration; + + if (notif->size == sizeof(*x)) { + memcpy(&priv->calib, x, sizeof(*x)); + IPW_DEBUG_INFO("TODO: Calibration\n"); + break; + } + + IPW_ERROR + ("Calibration of wrong size %d (should be %zd)\n", + notif->size, sizeof(*x)); + break; + } + + case HOST_NOTIFICATION_NOISE_STATS:{ + if (notif->size == sizeof(u32)) { + priv->last_noise = + (u8) (notif->u.noise.value & 0xff); + average_add(&priv->average_noise, + priv->last_noise); + break; + } + + IPW_ERROR + ("Noise stat is wrong size %d (should be %zd)\n", + notif->size, sizeof(u32)); + break; + } + + default: + IPW_ERROR("Unknown notification: " + "subtype=%d,flags=0x%2x,size=%d\n", + notif->subtype, notif->flags, notif->size); + } +} + +/** + * Destroys all DMA structures and initialise them again + * + * @param priv + * @return error code + */ +static int ipw_queue_reset(struct ipw_priv *priv) +{ + int rc = 0; + /** @todo customize queue sizes */ + int nTx = 64, nTxCmd = 8; + ipw_tx_queue_free(priv); + /* Tx CMD queue */ + rc = ipw_queue_tx_init(priv, &priv->txq_cmd, nTxCmd, + CX2_TX_CMD_QUEUE_READ_INDEX, + CX2_TX_CMD_QUEUE_WRITE_INDEX, + CX2_TX_CMD_QUEUE_BD_BASE, + CX2_TX_CMD_QUEUE_BD_SIZE); + if (rc) { + IPW_ERROR("Tx Cmd queue init failed\n"); + goto error; + } + /* Tx queue(s) */ + rc = ipw_queue_tx_init(priv, &priv->txq[0], nTx, + CX2_TX_QUEUE_0_READ_INDEX, + CX2_TX_QUEUE_0_WRITE_INDEX, + CX2_TX_QUEUE_0_BD_BASE, CX2_TX_QUEUE_0_BD_SIZE); + if (rc) { + IPW_ERROR("Tx 0 queue init failed\n"); + goto error; + } + rc = ipw_queue_tx_init(priv, &priv->txq[1], nTx, + CX2_TX_QUEUE_1_READ_INDEX, + CX2_TX_QUEUE_1_WRITE_INDEX, + CX2_TX_QUEUE_1_BD_BASE, CX2_TX_QUEUE_1_BD_SIZE); + if (rc) { + IPW_ERROR("Tx 1 queue init failed\n"); + goto error; + } + rc = ipw_queue_tx_init(priv, &priv->txq[2], nTx, + CX2_TX_QUEUE_2_READ_INDEX, + CX2_TX_QUEUE_2_WRITE_INDEX, + CX2_TX_QUEUE_2_BD_BASE, CX2_TX_QUEUE_2_BD_SIZE); + if (rc) { + IPW_ERROR("Tx 2 queue init failed\n"); + goto error; + } + rc = ipw_queue_tx_init(priv, &priv->txq[3], nTx, + CX2_TX_QUEUE_3_READ_INDEX, + CX2_TX_QUEUE_3_WRITE_INDEX, + CX2_TX_QUEUE_3_BD_BASE, CX2_TX_QUEUE_3_BD_SIZE); + if (rc) { + IPW_ERROR("Tx 3 queue init failed\n"); + goto error; + } + /* statistics */ + priv->rx_bufs_min = 0; + priv->rx_pend_max = 0; + return rc; + + error: + ipw_tx_queue_free(priv); + return rc; +} + +/** + * Reclaim Tx queue entries no more used by NIC. + * + * When FW adwances 'R' index, all entries between old and + * new 'R' index need to be reclaimed. As result, some free space + * forms. If there is enough free space (> low mark), wake Tx queue. + * + * @note Need to protect against garbage in 'R' index + * @param priv + * @param txq + * @param qindex + * @return Number of used entries remains in the queue + */ +static int ipw_queue_tx_reclaim(struct ipw_priv *priv, + struct clx2_tx_queue *txq, int qindex) +{ + u32 hw_tail; + int used; + struct clx2_queue *q = &txq->q; + + hw_tail = ipw_read32(priv, q->reg_r); + if (hw_tail >= q->n_bd) { + IPW_ERROR + ("Read index for DMA queue (%d) is out of range [0-%d)\n", + hw_tail, q->n_bd); + goto done; + } + for (; q->last_used != hw_tail; + q->last_used = ipw_queue_inc_wrap(q->last_used, q->n_bd)) { + ipw_queue_tx_free_tfd(priv, txq); + priv->tx_packets++; + } + done: + if (ipw_queue_space(q) > q->low_mark && qindex >= 0) { + __maybe_wake_tx(priv); + } + used = q->first_empty - q->last_used; + if (used < 0) + used += q->n_bd; + + return used; +} + +static int ipw_queue_tx_hcmd(struct ipw_priv *priv, int hcmd, void *buf, + int len, int sync) +{ + struct clx2_tx_queue *txq = &priv->txq_cmd; + struct clx2_queue *q = &txq->q; + struct tfd_frame *tfd; + + if (ipw_queue_space(q) < (sync ? 1 : 2)) { + IPW_ERROR("No space for Tx\n"); + return -EBUSY; + } + + tfd = &txq->bd[q->first_empty]; + txq->txb[q->first_empty] = NULL; + + memset(tfd, 0, sizeof(*tfd)); + tfd->control_flags.message_type = TX_HOST_COMMAND_TYPE; + tfd->control_flags.control_bits = TFD_NEED_IRQ_MASK; + priv->hcmd_seq++; + tfd->u.cmd.index = hcmd; + tfd->u.cmd.length = len; + memcpy(tfd->u.cmd.payload, buf, len); + q->first_empty = ipw_queue_inc_wrap(q->first_empty, q->n_bd); + ipw_write32(priv, q->reg_w, q->first_empty); + _ipw_read32(priv, 0x90); + + return 0; +} + +/* + * Rx theory of operation + * + * The host allocates 32 DMA target addresses and passes the host address + * to the firmware at register CX2_RFDS_TABLE_LOWER + N * RFD_SIZE where N is + * 0 to 31 + * + * Rx Queue Indexes + * The host/firmware share two index registers for managing the Rx buffers. + * + * The READ index maps to the first position that the firmware may be writing + * to -- the driver can read up to (but not including) this position and get + * good data. + * The READ index is managed by the firmware once the card is enabled. + * + * The WRITE index maps to the last position the driver has read from -- the + * position preceding WRITE is the last slot the firmware can place a packet. + * + * The queue is empty (no good data) if WRITE = READ - 1, and is full if + * WRITE = READ. + * + * During initialization the host sets up the READ queue position to the first + * INDEX position, and WRITE to the last (READ - 1 wrapped) + * + * When the firmware places a packet in a buffer it will advance the READ index + * and fire the RX interrupt. The driver can then query the READ index and + * process as many packets as possible, moving the WRITE index forward as it + * resets the Rx queue buffers with new memory. + * + * The management in the driver is as follows: + * + A list of pre-allocated SKBs is stored in ipw->rxq->rx_free. When + * ipw->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled + * to replensish the ipw->rxq->rx_free. + * + In ipw_rx_queue_replenish (scheduled) if 'processed' != 'read' then the + * ipw->rxq is replenished and the READ INDEX is updated (updating the + * 'processed' and 'read' driver indexes as well) + * + A received packet is processed and handed to the kernel network stack, + * detached from the ipw->rxq. The driver 'processed' index is updated. + * + The Host/Firmware ipw->rxq is replenished at tasklet time from the rx_free + * list. If there are no allocated buffers in ipw->rxq->rx_free, the READ + * INDEX is not incremented and ipw->status(RX_STALLED) is set. If there + * were enough free buffers and RX_STALLED is set it is cleared. + * + * + * Driver sequence: + * + * ipw_rx_queue_alloc() Allocates rx_free + * ipw_rx_queue_replenish() Replenishes rx_free list from rx_used, and calls + * ipw_rx_queue_restock + * ipw_rx_queue_restock() Moves available buffers from rx_free into Rx + * queue, updates firmware pointers, and updates + * the WRITE index. If insufficient rx_free buffers + * are available, schedules ipw_rx_queue_replenish + * + * -- enable interrupts -- + * ISR - ipw_rx() Detach ipw_rx_mem_buffers from pool up to the + * READ INDEX, detaching the SKB from the pool. + * Moves the packet buffer from queue to rx_used. + * Calls ipw_rx_queue_restock to refill any empty + * slots. + * ... + * + */ + +/* + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can pulling from rx_free. + * + * This moves the 'write' index forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +static void ipw_rx_queue_restock(struct ipw_priv *priv) +{ + struct ipw_rx_queue *rxq = priv->rxq; + struct list_head *element; + struct ipw_rx_mem_buffer *rxb; + unsigned long flags; + int write; + + spin_lock_irqsave(&rxq->lock, flags); + write = rxq->write; + while ((rxq->write != rxq->processed) && (rxq->free_count)) { + element = rxq->rx_free.next; + rxb = list_entry(element, struct ipw_rx_mem_buffer, list); + list_del(element); + + ipw_write32(priv, CX2_RFDS_TABLE_LOWER + rxq->write * RFD_SIZE, + rxb->dma_addr); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) % RX_QUEUE_SIZE; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(priv->workqueue, &priv->rx_replenish); + + /* If we've added more space for the firmware to place data, tell it */ + if (write != rxq->write) + ipw_write32(priv, CX2_RX_WRITE_INDEX, rxq->write); +} + +/* + * Move all used packet from rx_used to rx_free, allocating a new SKB for each. + * Also restock the Rx queue via ipw_rx_queue_restock. + * + * This is called as a scheduled work item (except for during intialization) + */ +static void ipw_rx_queue_replenish(void *data) +{ + struct ipw_priv *priv = data; + struct ipw_rx_queue *rxq = priv->rxq; + struct list_head *element; + struct ipw_rx_mem_buffer *rxb; + unsigned long flags; + + spin_lock_irqsave(&rxq->lock, flags); + while (!list_empty(&rxq->rx_used)) { + element = rxq->rx_used.next; + rxb = list_entry(element, struct ipw_rx_mem_buffer, list); + rxb->skb = alloc_skb(CX2_RX_BUF_SIZE, GFP_ATOMIC); + if (!rxb->skb) { + printk(KERN_CRIT "%s: Can not allocate SKB buffers.\n", + priv->net_dev->name); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + break; + } + list_del(element); + + rxb->rxb = (struct ipw_rx_buffer *)rxb->skb->data; + rxb->dma_addr = + pci_map_single(priv->pci_dev, rxb->skb->data, + CX2_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + ipw_rx_queue_restock(priv); +} + +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have it's SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +static void ipw_rx_queue_free(struct ipw_priv *priv, struct ipw_rx_queue *rxq) +{ + int i; + + if (!rxq) + return; + + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, rxq->pool[i].dma_addr, + CX2_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + } + + kfree(rxq); +} + +static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv) +{ + struct ipw_rx_queue *rxq; + int i; + + rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL); + memset(rxq, 0, sizeof(*rxq)); + spin_lock_init(&rxq->lock); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->processed = RX_QUEUE_SIZE - 1; + rxq->free_count = 0; + + return rxq; +} + +static int ipw_is_rate_in_mask(struct ipw_priv *priv, int ieee_mode, u8 rate) +{ + rate &= ~IEEE80211_BASIC_RATE_MASK; + if (ieee_mode == IEEE_A) { + switch (rate) { + case IEEE80211_OFDM_RATE_6MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ? + 1 : 0; + case IEEE80211_OFDM_RATE_9MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ? + 1 : 0; + case IEEE80211_OFDM_RATE_12MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_18MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_24MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_36MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_48MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_54MB: + return priv-> + rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ? 1 : 0; + default: + return 0; + } + } + + /* B and G mixed */ + switch (rate) { + case IEEE80211_CCK_RATE_1MB: + return priv->rates_mask & IEEE80211_CCK_RATE_1MB_MASK ? 1 : 0; + case IEEE80211_CCK_RATE_2MB: + return priv->rates_mask & IEEE80211_CCK_RATE_2MB_MASK ? 1 : 0; + case IEEE80211_CCK_RATE_5MB: + return priv->rates_mask & IEEE80211_CCK_RATE_5MB_MASK ? 1 : 0; + case IEEE80211_CCK_RATE_11MB: + return priv->rates_mask & IEEE80211_CCK_RATE_11MB_MASK ? 1 : 0; + } + + /* If we are limited to B modulations, bail at this point */ + if (ieee_mode == IEEE_B) + return 0; + + /* G */ + switch (rate) { + case IEEE80211_OFDM_RATE_6MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_9MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_12MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_18MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_24MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_36MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_48MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ? 1 : 0; + case IEEE80211_OFDM_RATE_54MB: + return priv->rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ? 1 : 0; + } + + return 0; +} + +static int ipw_compatible_rates(struct ipw_priv *priv, + const struct ieee80211_network *network, + struct ipw_supported_rates *rates) +{ + int num_rates, i; + + memset(rates, 0, sizeof(*rates)); + num_rates = min(network->rates_len, (u8) IPW_MAX_RATES); + rates->num_rates = 0; + for (i = 0; i < num_rates; i++) { + if (!ipw_is_rate_in_mask + (priv, network->mode, network->rates[i])) { + IPW_DEBUG_SCAN("Rate %02X masked : 0x%08X\n", + network->rates[i], priv->rates_mask); + continue; + } + + rates->supported_rates[rates->num_rates++] = network->rates[i]; + } + + num_rates = + min(network->rates_ex_len, (u8) (IPW_MAX_RATES - num_rates)); + for (i = 0; i < num_rates; i++) { + if (!ipw_is_rate_in_mask + (priv, network->mode, network->rates_ex[i])) { + IPW_DEBUG_SCAN("Rate %02X masked : 0x%08X\n", + network->rates_ex[i], priv->rates_mask); + continue; + } + + rates->supported_rates[rates->num_rates++] = + network->rates_ex[i]; + } + + return rates->num_rates; +} + +static inline void ipw_copy_rates(struct ipw_supported_rates *dest, + const struct ipw_supported_rates *src) +{ + u8 i; + for (i = 0; i < src->num_rates; i++) + dest->supported_rates[i] = src->supported_rates[i]; + dest->num_rates = src->num_rates; +} + +/* TODO: Look at sniffed packets in the air to determine if the basic rate + * mask should ever be used -- right now all callers to add the scan rates are + * set with the modulation = CCK, so BASIC_RATE_MASK is never set... */ +static void ipw_add_cck_scan_rates(struct ipw_supported_rates *rates, + u8 modulation, u32 rate_mask) +{ + u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ? + IEEE80211_BASIC_RATE_MASK : 0; + + if (rate_mask & IEEE80211_CCK_RATE_1MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB; + + if (rate_mask & IEEE80211_CCK_RATE_2MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB; + + if (rate_mask & IEEE80211_CCK_RATE_5MB_MASK) + rates->supported_rates[rates->num_rates++] = basic_mask | + IEEE80211_CCK_RATE_5MB; + + if (rate_mask & IEEE80211_CCK_RATE_11MB_MASK) + rates->supported_rates[rates->num_rates++] = basic_mask | + IEEE80211_CCK_RATE_11MB; +} + +static void ipw_add_ofdm_scan_rates(struct ipw_supported_rates *rates, + u8 modulation, u32 rate_mask) +{ + u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ? + IEEE80211_BASIC_RATE_MASK : 0; + + if (rate_mask & IEEE80211_OFDM_RATE_6MB_MASK) + rates->supported_rates[rates->num_rates++] = basic_mask | + IEEE80211_OFDM_RATE_6MB; + + if (rate_mask & IEEE80211_OFDM_RATE_9MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_OFDM_RATE_9MB; + + if (rate_mask & IEEE80211_OFDM_RATE_12MB_MASK) + rates->supported_rates[rates->num_rates++] = basic_mask | + IEEE80211_OFDM_RATE_12MB; + + if (rate_mask & IEEE80211_OFDM_RATE_18MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_OFDM_RATE_18MB; + + if (rate_mask & IEEE80211_OFDM_RATE_24MB_MASK) + rates->supported_rates[rates->num_rates++] = basic_mask | + IEEE80211_OFDM_RATE_24MB; + + if (rate_mask & IEEE80211_OFDM_RATE_36MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_OFDM_RATE_36MB; + + if (rate_mask & IEEE80211_OFDM_RATE_48MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_OFDM_RATE_48MB; + + if (rate_mask & IEEE80211_OFDM_RATE_54MB_MASK) + rates->supported_rates[rates->num_rates++] = + IEEE80211_OFDM_RATE_54MB; +} + +struct ipw_network_match { + struct ieee80211_network *network; + struct ipw_supported_rates rates; +}; + +static int ipw_best_network(struct ipw_priv *priv, + struct ipw_network_match *match, + struct ieee80211_network *network, int roaming) +{ + struct ipw_supported_rates rates; + + /* Verify that this network's capability is compatible with the + * current mode (AdHoc or Infrastructure) */ + if ((priv->ieee->iw_mode == IW_MODE_INFRA && + !(network->capability & WLAN_CAPABILITY_ESS)) || + (priv->ieee->iw_mode == IW_MODE_ADHOC && + !(network->capability & WLAN_CAPABILITY_IBSS))) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded due to " + "capability mismatch.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid)); + return 0; + } + + /* If we do not have an ESSID for this AP, we can not associate with + * it */ + if (network->flags & NETWORK_EMPTY_ESSID) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of hidden ESSID.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid)); + return 0; + } + + if (unlikely(roaming)) { + /* If we are roaming, then ensure check if this is a valid + * network to try and roam to */ + if ((network->ssid_len != match->network->ssid_len) || + memcmp(network->ssid, match->network->ssid, + network->ssid_len)) { + IPW_DEBUG_ASSOC("Netowrk '%s (" MAC_FMT ")' excluded " + "because of non-network ESSID.\n", + escape_essid(network->ssid, + network->ssid_len), + MAC_ARG(network->bssid)); + return 0; + } + } else { + /* If an ESSID has been configured then compare the broadcast + * ESSID to ours */ + if ((priv->config & CFG_STATIC_ESSID) && + ((network->ssid_len != priv->essid_len) || + memcmp(network->ssid, priv->essid, + min(network->ssid_len, priv->essid_len)))) { + char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + strncpy(escaped, + escape_essid(network->ssid, network->ssid_len), + sizeof(escaped)); + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of ESSID mismatch: '%s'.\n", + escaped, MAC_ARG(network->bssid), + escape_essid(priv->essid, + priv->essid_len)); + return 0; + } + } + + /* If the old network rate is better than this one, don't bother + * testing everything else. */ + if (match->network && match->network->stats.rssi > network->stats.rssi) { + char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + strncpy(escaped, + escape_essid(network->ssid, network->ssid_len), + sizeof(escaped)); + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded because " + "'%s (" MAC_FMT ")' has a stronger signal.\n", + escaped, MAC_ARG(network->bssid), + escape_essid(match->network->ssid, + match->network->ssid_len), + MAC_ARG(match->network->bssid)); + return 0; + } + + /* If this network has already had an association attempt within the + * last 3 seconds, do not try and associate again... */ + if (network->last_associate && + time_after(network->last_associate + (HZ * 5UL), jiffies)) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of storming (%lu since last " + "assoc attempt).\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid), + (jiffies - network->last_associate) / HZ); + return 0; + } + + /* Now go through and see if the requested network is valid... */ + if (priv->ieee->scan_age != 0 && + jiffies - network->last_scanned > priv->ieee->scan_age) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of age: %lums.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid), + (jiffies - network->last_scanned) / (HZ / 100)); + return 0; + } + + if ((priv->config & CFG_STATIC_CHANNEL) && + (network->channel != priv->channel)) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of channel mismatch: %d != %d.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid), + network->channel, priv->channel); + return 0; + } + + /* Verify privacy compatability */ + if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) != + ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of privacy mismatch: %s != %s.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid), + priv->capability & CAP_PRIVACY_ON ? "on" : + "off", + network->capability & + WLAN_CAPABILITY_PRIVACY ? "on" : "off"); + return 0; + } + + if ((priv->config & CFG_STATIC_BSSID) && + memcmp(network->bssid, priv->bssid, ETH_ALEN)) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of BSSID mismatch: " MAC_FMT ".\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid), MAC_ARG(priv->bssid)); + return 0; + } + + /* Filter out any incompatible freq / mode combinations */ + if (!ieee80211_is_valid_mode(priv->ieee, network->mode)) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of invalid frequency/mode " + "combination.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid)); + return 0; + } + + ipw_compatible_rates(priv, network, &rates); + if (rates.num_rates == 0) { + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " + "because of no compatible rates.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid)); + return 0; + } + + /* TODO: Perform any further minimal comparititive tests. We do not + * want to put too much policy logic here; intelligent scan selection + * should occur within a generic IEEE 802.11 user space tool. */ + + /* Set up 'new' AP to this network */ + ipw_copy_rates(&match->rates, &rates); + match->network = network; + + IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' is a viable match.\n", + escape_essid(network->ssid, network->ssid_len), + MAC_ARG(network->bssid)); + + return 1; +} + +static void ipw_adhoc_create(struct ipw_priv *priv, + struct ieee80211_network *network) +{ + /* + * For the purposes of scanning, we can set our wireless mode + * to trigger scans across combinations of bands, but when it + * comes to creating a new ad-hoc network, we have tell the FW + * exactly which band to use. + * + * We also have the possibility of an invalid channel for the + * chossen band. Attempting to create a new ad-hoc network + * with an invalid channel for wireless mode will trigger a + * FW fatal error. + */ + network->mode = is_valid_channel(priv->ieee->mode, priv->channel); + if (network->mode) { + network->channel = priv->channel; + } else { + IPW_WARNING("Overriding invalid channel\n"); + if (priv->ieee->mode & IEEE_A) { + network->mode = IEEE_A; + priv->channel = band_a_active_channel[0]; + } else if (priv->ieee->mode & IEEE_G) { + network->mode = IEEE_G; + priv->channel = band_b_active_channel[0]; + } else { + network->mode = IEEE_B; + priv->channel = band_b_active_channel[0]; + } + } + + network->channel = priv->channel; + priv->config |= CFG_ADHOC_PERSIST; + ipw_create_bssid(priv, network->bssid); + network->ssid_len = priv->essid_len; + memcpy(network->ssid, priv->essid, priv->essid_len); + memset(&network->stats, 0, sizeof(network->stats)); + network->capability = WLAN_CAPABILITY_IBSS; + if (priv->capability & CAP_PRIVACY_ON) + network->capability |= WLAN_CAPABILITY_PRIVACY; + network->rates_len = min(priv->rates.num_rates, MAX_RATES_LENGTH); + memcpy(network->rates, priv->rates.supported_rates, network->rates_len); + network->rates_ex_len = priv->rates.num_rates - network->rates_len; + memcpy(network->rates_ex, + &priv->rates.supported_rates[network->rates_len], + network->rates_ex_len); + network->last_scanned = 0; + network->flags = 0; + network->last_associate = 0; + network->time_stamp[0] = 0; + network->time_stamp[1] = 0; + network->beacon_interval = 100; /* Default */ + network->listen_interval = 10; /* Default */ + network->atim_window = 0; /* Default */ +#ifdef CONFIG_IEEE80211_WPA + network->wpa_ie_len = 0; + network->rsn_ie_len = 0; +#endif /* CONFIG_IEEE80211_WPA */ +} + +static void ipw_send_wep_keys(struct ipw_priv *priv) +{ + struct ipw_wep_key *key; + int i; + struct host_cmd cmd = { + .cmd = IPW_CMD_WEP_KEY, + .len = sizeof(*key) + }; + + key = (struct ipw_wep_key *)&cmd.param; + key->cmd_id = DINO_CMD_WEP_KEY; + key->seq_num = 0; + + for (i = 0; i < 4; i++) { + key->key_index = i; + if (!(priv->sec.flags & (1 << i))) { + key->key_size = 0; + } else { + key->key_size = priv->sec.key_sizes[i]; + memcpy(key->key, priv->sec.keys[i], key->key_size); + } + + if (ipw_send_cmd(priv, &cmd)) { + IPW_ERROR("failed to send WEP_KEY command\n"); + return; + } + } +} + +static void ipw_adhoc_check(void *data) +{ + struct ipw_priv *priv = data; + + if (priv->missed_adhoc_beacons++ > priv->missed_beacon_threshold && + !(priv->config & CFG_ADHOC_PERSIST)) { + IPW_DEBUG_SCAN("Disassociating due to missed beacons\n"); + ipw_remove_current_network(priv); + ipw_disassociate(priv); + return; + } + + queue_delayed_work(priv->workqueue, &priv->adhoc_check, + priv->assoc_request.beacon_interval); +} + +#ifdef CONFIG_IPW_DEBUG +static void ipw_debug_config(struct ipw_priv *priv) +{ + IPW_DEBUG_INFO("Scan completed, no valid APs matched " + "[CFG 0x%08X]\n", priv->config); + if (priv->config & CFG_STATIC_CHANNEL) + IPW_DEBUG_INFO("Channel locked to %d\n", priv->channel); + else + IPW_DEBUG_INFO("Channel unlocked.\n"); + if (priv->config & CFG_STATIC_ESSID) + IPW_DEBUG_INFO("ESSID locked to '%s'\n", + escape_essid(priv->essid, priv->essid_len)); + else + IPW_DEBUG_INFO("ESSID unlocked.\n"); + if (priv->config & CFG_STATIC_BSSID) + IPW_DEBUG_INFO("BSSID locked to %d\n", priv->channel); + else + IPW_DEBUG_INFO("BSSID unlocked.\n"); + if (priv->capability & CAP_PRIVACY_ON) + IPW_DEBUG_INFO("PRIVACY on\n"); + else + IPW_DEBUG_INFO("PRIVACY off\n"); + IPW_DEBUG_INFO("RATE MASK: 0x%08X\n", priv->rates_mask); +} +#else +#define ipw_debug_config(x) do {} while (0) +#endif + +static inline void ipw_set_fixed_rate(struct ipw_priv *priv, + struct ieee80211_network *network) +{ + /* TODO: Verify that this works... */ + struct ipw_fixed_rate fr = { + .tx_rates = priv->rates_mask + }; + u32 reg; + u16 mask = 0; + + /* Identify 'current FW band' and match it with the fixed + * Tx rates */ + + switch (priv->ieee->freq_band) { + case IEEE80211_52GHZ_BAND: /* A only */ + /* IEEE_A */ + if (priv->rates_mask & ~IEEE80211_OFDM_RATES_MASK) { + /* Invalid fixed rate mask */ + fr.tx_rates = 0; + break; + } + + fr.tx_rates >>= IEEE80211_OFDM_SHIFT_MASK_A; + break; + + default: /* 2.4Ghz or Mixed */ + /* IEEE_B */ + if (network->mode == IEEE_B) { + if (fr.tx_rates & ~IEEE80211_CCK_RATES_MASK) { + /* Invalid fixed rate mask */ + fr.tx_rates = 0; + } + break; + } + + /* IEEE_G */ + if (fr.tx_rates & ~(IEEE80211_CCK_RATES_MASK | + IEEE80211_OFDM_RATES_MASK)) { + /* Invalid fixed rate mask */ + fr.tx_rates = 0; + break; + } + + if (IEEE80211_OFDM_RATE_6MB_MASK & fr.tx_rates) { + mask |= (IEEE80211_OFDM_RATE_6MB_MASK >> 1); + fr.tx_rates &= ~IEEE80211_OFDM_RATE_6MB_MASK; + } + + if (IEEE80211_OFDM_RATE_9MB_MASK & fr.tx_rates) { + mask |= (IEEE80211_OFDM_RATE_9MB_MASK >> 1); + fr.tx_rates &= ~IEEE80211_OFDM_RATE_9MB_MASK; + } + + if (IEEE80211_OFDM_RATE_12MB_MASK & fr.tx_rates) { + mask |= (IEEE80211_OFDM_RATE_12MB_MASK >> 1); + fr.tx_rates &= ~IEEE80211_OFDM_RATE_12MB_MASK; + } + + fr.tx_rates |= mask; + break; + } + + reg = ipw_read32(priv, IPW_MEM_FIXED_OVERRIDE); + ipw_write_reg32(priv, reg, *(u32 *) & fr); +} + +static int ipw_associate_network(struct ipw_priv *priv, + struct ieee80211_network *network, + struct ipw_supported_rates *rates, int roaming) +{ + int err; + + if (priv->config & CFG_FIXED_RATE) + ipw_set_fixed_rate(priv, network); + + if (!(priv->config & CFG_STATIC_ESSID)) { + priv->essid_len = min(network->ssid_len, + (u8) IW_ESSID_MAX_SIZE); + memcpy(priv->essid, network->ssid, priv->essid_len); + } + + network->last_associate = jiffies; + + memset(&priv->assoc_request, 0, sizeof(priv->assoc_request)); + priv->assoc_request.channel = network->channel; + if ((priv->capability & CAP_PRIVACY_ON) && + (priv->capability & CAP_SHARED_KEY)) { + priv->assoc_request.auth_type = AUTH_SHARED_KEY; + priv->assoc_request.auth_key = priv->sec.active_key; + } else { + priv->assoc_request.auth_type = AUTH_OPEN; + priv->assoc_request.auth_key = 0; + } + + if (priv->capability & CAP_PRIVACY_ON) + ipw_send_wep_keys(priv); + + /* + * It is valid for our ieee device to support multiple modes, but + * when it comes to associating to a given network we have to choose + * just one mode. + */ + if (network->mode & priv->ieee->mode & IEEE_A) + priv->assoc_request.ieee_mode = IPW_A_MODE; + else if (network->mode & priv->ieee->mode & IEEE_G) + priv->assoc_request.ieee_mode = IPW_G_MODE; + else if (network->mode & priv->ieee->mode & IEEE_B) + priv->assoc_request.ieee_mode = IPW_B_MODE; + + IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, " + "802.11%c [%d], enc=%s%s%s%c%c\n", + roaming ? "Rea" : "A", + escape_essid(priv->essid, priv->essid_len), + network->channel, + ipw_modes[priv->assoc_request.ieee_mode], + rates->num_rates, + priv->capability & CAP_PRIVACY_ON ? "on " : "off", + priv->capability & CAP_PRIVACY_ON ? + (priv->capability & CAP_SHARED_KEY ? "(shared)" : + "(open)") : "", + priv->capability & CAP_PRIVACY_ON ? " key=" : "", + priv->capability & CAP_PRIVACY_ON ? + '1' + priv->sec.active_key : '.', + priv->capability & CAP_PRIVACY_ON ? '.' : ' '); + + priv->assoc_request.beacon_interval = network->beacon_interval; + if ((priv->ieee->iw_mode == IW_MODE_ADHOC) && + (network->time_stamp[0] == 0) && (network->time_stamp[1] == 0)) { + priv->assoc_request.assoc_type = HC_IBSS_START; + priv->assoc_request.assoc_tsf_msw = 0; + priv->assoc_request.assoc_tsf_lsw = 0; + } else { + if (unlikely(roaming)) + priv->assoc_request.assoc_type = HC_REASSOCIATE; + else + priv->assoc_request.assoc_type = HC_ASSOCIATE; + priv->assoc_request.assoc_tsf_msw = network->time_stamp[1]; + priv->assoc_request.assoc_tsf_lsw = network->time_stamp[0]; + } + + memcpy(&priv->assoc_request.bssid, network->bssid, ETH_ALEN); + + if (priv->ieee->iw_mode == IW_MODE_ADHOC) { + memset(&priv->assoc_request.dest, 0xFF, ETH_ALEN); + priv->assoc_request.atim_window = network->atim_window; + } else { + memcpy(&priv->assoc_request.dest, network->bssid, ETH_ALEN); + priv->assoc_request.atim_window = 0; + } + + priv->assoc_request.capability = network->capability; + priv->assoc_request.listen_interval = network->listen_interval; + + err = ipw_send_ssid(priv, priv->essid, priv->essid_len); + if (err) { + IPW_DEBUG_HC("Attempt to send SSID command failed.\n"); + return err; + } + + rates->ieee_mode = priv->assoc_request.ieee_mode; + rates->purpose = IPW_RATE_CONNECT; + ipw_send_supported_rates(priv, rates); + + if (priv->assoc_request.ieee_mode == IPW_G_MODE) + priv->sys_config.dot11g_auto_detection = 1; + else + priv->sys_config.dot11g_auto_detection = 0; + err = ipw_send_system_config(priv, &priv->sys_config); + if (err) { + IPW_DEBUG_HC("Attempt to send sys config command failed.\n"); + return err; + } + + IPW_DEBUG_ASSOC("Association sensitivity: %d\n", network->stats.rssi); + err = ipw_set_sensitivity(priv, network->stats.rssi); + if (err) { + IPW_DEBUG_HC("Attempt to send associate command failed.\n"); + return err; + } + + /* + * If preemption is enabled, it is possible for the association + * to complete before we return from ipw_send_associate. Therefore + * we have to be sure and update our priviate data first. + */ + priv->channel = network->channel; + memcpy(priv->bssid, network->bssid, ETH_ALEN); + priv->status |= STATUS_ASSOCIATING; + priv->status &= ~STATUS_SECURITY_UPDATED; + + priv->assoc_network = network; + + err = ipw_send_associate(priv, &priv->assoc_request); + if (err) { + IPW_DEBUG_HC("Attempt to send associate command failed.\n"); + return err; + } + + IPW_DEBUG(IPW_DL_STATE, "associating: '%s' " MAC_FMT " \n", + escape_essid(priv->essid, priv->essid_len), + MAC_ARG(priv->bssid)); + + return 0; +} + +static void ipw_roam(void *data) +{ + struct ipw_priv *priv = data; + struct ieee80211_network *network = NULL; + struct ipw_network_match match = { + .network = priv->assoc_network + }; + + /* The roaming process is as follows: + * + * 1. Missed beacon threshold triggers the roaming process by + * setting the status ROAM bit and requesting a scan. + * 2. When the scan completes, it schedules the ROAM work + * 3. The ROAM work looks at all of the known networks for one that + * is a better network than the currently associated. If none + * found, the ROAM process is over (ROAM bit cleared) + * 4. If a better network is found, a disassociation request is + * sent. + * 5. When the disassociation completes, the roam work is again + * scheduled. The second time through, the driver is no longer + * associated, and the newly selected network is sent an + * association request. + * 6. At this point ,the roaming process is complete and the ROAM + * status bit is cleared. + */ + + /* If we are no longer associated, and the roaming bit is no longer + * set, then we are not actively roaming, so just return */ + if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ROAMING))) + return; + + if (priv->status & STATUS_ASSOCIATED) { + /* First pass through ROAM process -- look for a better + * network */ + u8 rssi = priv->assoc_network->stats.rssi; + priv->assoc_network->stats.rssi = -128; + list_for_each_entry(network, &priv->ieee->network_list, list) { + if (network != priv->assoc_network) + ipw_best_network(priv, &match, network, 1); + } + priv->assoc_network->stats.rssi = rssi; + + if (match.network == priv->assoc_network) { + IPW_DEBUG_ASSOC("No better APs in this network to " + "roam to.\n"); + priv->status &= ~STATUS_ROAMING; + ipw_debug_config(priv); + return; + } + + ipw_send_disassociate(priv, 1); + priv->assoc_network = match.network; + + return; + } + + /* Second pass through ROAM process -- request association */ + ipw_compatible_rates(priv, priv->assoc_network, &match.rates); + ipw_associate_network(priv, priv->assoc_network, &match.rates, 1); + priv->status &= ~STATUS_ROAMING; +} + +static void ipw_associate(void *data) +{ + struct ipw_priv *priv = data; + + struct ieee80211_network *network = NULL; + struct ipw_network_match match = { + .network = NULL + }; + struct ipw_supported_rates *rates; + struct list_head *element; + + if (!(priv->config & CFG_ASSOCIATE) && + !(priv->config & (CFG_STATIC_ESSID | + CFG_STATIC_CHANNEL | CFG_STATIC_BSSID))) { + IPW_DEBUG_ASSOC("Not attempting association (associate=0)\n"); + return; + } + + list_for_each_entry(network, &priv->ieee->network_list, list) + ipw_best_network(priv, &match, network, 0); + + network = match.network; + rates = &match.rates; + + if (network == NULL && + priv->ieee->iw_mode == IW_MODE_ADHOC && + priv->config & CFG_ADHOC_CREATE && + priv->config & CFG_STATIC_ESSID && + !list_empty(&priv->ieee->network_free_list)) { + element = priv->ieee->network_free_list.next; + network = list_entry(element, struct ieee80211_network, list); + ipw_adhoc_create(priv, network); + rates = &priv->rates; + list_del(element); + list_add_tail(&network->list, &priv->ieee->network_list); + } + + /* If we reached the end of the list, then we don't have any valid + * matching APs */ + if (!network) { + ipw_debug_config(priv); + + queue_delayed_work(priv->workqueue, &priv->request_scan, + SCAN_INTERVAL); + + return; + } + + ipw_associate_network(priv, network, rates, 0); +} + +static inline void ipw_handle_data_packet(struct ipw_priv *priv, + struct ipw_rx_mem_buffer *rxb, + struct ieee80211_rx_stats *stats) +{ + struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data; + + /* We received data from the HW, so stop the watchdog */ + priv->net_dev->trans_start = jiffies; + + /* We only process data packets if the + * interface is open */ + if (unlikely((pkt->u.frame.length + IPW_RX_FRAME_SIZE) > + skb_tailroom(rxb->skb))) { + priv->ieee->stats.rx_errors++; + priv->wstats.discard.misc++; + IPW_DEBUG_DROP("Corruption detected! Oh no!\n"); + return; + } else if (unlikely(!netif_running(priv->net_dev))) { + priv->ieee->stats.rx_dropped++; + priv->wstats.discard.misc++; + IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); + return; + } + + /* Advance skb->data to the start of the actual payload */ + skb_reserve(rxb->skb, offsetof(struct ipw_rx_packet, u.frame.data)); + + /* Set the size of the skb to the size of the frame */ + skb_put(rxb->skb, pkt->u.frame.length); + + IPW_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len); + + if (!ieee80211_rx(priv->ieee, rxb->skb, stats)) + priv->ieee->stats.rx_errors++; + else /* ieee80211_rx succeeded, so it now owns the SKB */ + rxb->skb = NULL; +} + +/* + * Main entry function for recieving a packet with 80211 headers. This + * should be called when ever the FW has notified us that there is a new + * skb in the recieve queue. + */ +static void ipw_rx(struct ipw_priv *priv) +{ + struct ipw_rx_mem_buffer *rxb; + struct ipw_rx_packet *pkt; + struct ieee80211_hdr *header; + u32 r, w, i; + u8 network_packet; + + r = ipw_read32(priv, CX2_RX_READ_INDEX); + w = ipw_read32(priv, CX2_RX_WRITE_INDEX); + i = (priv->rxq->processed + 1) % RX_QUEUE_SIZE; + + while (i != r) { + rxb = priv->rxq->queue[i]; +#ifdef CONFIG_IPW_DEBUG + if (unlikely(rxb == NULL)) { + printk(KERN_CRIT "Queue not allocated!\n"); + break; + } +#endif + priv->rxq->queue[i] = NULL; + + pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, + CX2_RX_BUF_SIZE, + PCI_DMA_FROMDEVICE); + + pkt = (struct ipw_rx_packet *)rxb->skb->data; + IPW_DEBUG_RX("Packet: type=%02X seq=%02X bits=%02X\n", + pkt->header.message_type, + pkt->header.rx_seq_num, pkt->header.control_bits); + + switch (pkt->header.message_type) { + case RX_FRAME_TYPE: /* 802.11 frame */ { + struct ieee80211_rx_stats stats = { + .rssi = pkt->u.frame.rssi_dbm - + IPW_RSSI_TO_DBM, + .signal = pkt->u.frame.signal, + .rate = pkt->u.frame.rate, + .mac_time = jiffies, + .received_channel = + pkt->u.frame.received_channel, + .freq = + (pkt->u.frame. + control & (1 << 0)) ? + IEEE80211_24GHZ_BAND : + IEEE80211_52GHZ_BAND, + .len = pkt->u.frame.length, + }; + + if (stats.rssi != 0) + stats.mask |= IEEE80211_STATMASK_RSSI; + if (stats.signal != 0) + stats.mask |= IEEE80211_STATMASK_SIGNAL; + if (stats.rate != 0) + stats.mask |= IEEE80211_STATMASK_RATE; + + priv->rx_packets++; + +#ifdef CONFIG_IPW_PROMISC + if (priv->ieee->iw_mode == IW_MODE_MONITOR) { + ipw_handle_data_packet(priv, rxb, + &stats); + break; + } +#endif + + header = + (struct ieee80211_hdr *)(rxb->skb->data + + IPW_RX_FRAME_SIZE); + /* TODO: Check Ad-Hoc dest/source and make sure + * that we are actually parsing these packets + * correctly -- we should probably use the + * frame control of the packet and disregard + * the current iw_mode */ + switch (priv->ieee->iw_mode) { + case IW_MODE_ADHOC: + network_packet = + !memcmp(header->addr1, + priv->net_dev->dev_addr, + ETH_ALEN) || + !memcmp(header->addr3, + priv->bssid, ETH_ALEN) || + is_broadcast_ether_addr(header-> + addr1) + || is_multicast_ether_addr(header-> + addr1); + break; + + case IW_MODE_INFRA: + default: + network_packet = + !memcmp(header->addr3, + priv->bssid, ETH_ALEN) || + !memcmp(header->addr1, + priv->net_dev->dev_addr, + ETH_ALEN) || + is_broadcast_ether_addr(header-> + addr1) + || is_multicast_ether_addr(header-> + addr1); + break; + } + + if (network_packet && priv->assoc_network) { + priv->assoc_network->stats.rssi = + stats.rssi; + average_add(&priv->average_rssi, + stats.rssi); + priv->last_rx_rssi = stats.rssi; + } + + IPW_DEBUG_RX("Frame: len=%u\n", + pkt->u.frame.length); + + if (pkt->u.frame.length < frame_hdr_len(header)) { + IPW_DEBUG_DROP + ("Received packet is too small. " + "Dropping.\n"); + priv->ieee->stats.rx_errors++; + priv->wstats.discard.misc++; + break; + } + + switch (WLAN_FC_GET_TYPE(header->frame_ctl)) { + case IEEE80211_FTYPE_MGMT: + ieee80211_rx_mgt(priv->ieee, header, + &stats); + if (priv->ieee->iw_mode == IW_MODE_ADHOC + && + ((WLAN_FC_GET_STYPE + (header->frame_ctl) == + IEEE80211_STYPE_PROBE_RESP) + || + (WLAN_FC_GET_STYPE + (header->frame_ctl) == + IEEE80211_STYPE_BEACON)) + && !memcmp(header->addr3, + priv->bssid, ETH_ALEN)) + ipw_add_station(priv, + header->addr2); + break; + + case IEEE80211_FTYPE_CTL: + break; + + case IEEE80211_FTYPE_DATA: + if (network_packet) + ipw_handle_data_packet(priv, + rxb, + &stats); + else + IPW_DEBUG_DROP("Dropping: " + MAC_FMT ", " + MAC_FMT ", " + MAC_FMT "\n", + MAC_ARG(header-> + addr1), + MAC_ARG(header-> + addr2), + MAC_ARG(header-> + addr3)); + break; + } + break; + } + + case RX_HOST_NOTIFICATION_TYPE:{ + IPW_DEBUG_RX + ("Notification: subtype=%02X flags=%02X size=%d\n", + pkt->u.notification.subtype, + pkt->u.notification.flags, + pkt->u.notification.size); + ipw_rx_notification(priv, &pkt->u.notification); + break; + } + + default: + IPW_DEBUG_RX("Bad Rx packet of type %d\n", + pkt->header.message_type); + break; + } + + /* For now we just don't re-use anything. We can tweak this + * later to try and re-use notification packets and SKBs that + * fail to Rx correctly */ + if (rxb->skb != NULL) { + dev_kfree_skb_any(rxb->skb); + rxb->skb = NULL; + } + + pci_unmap_single(priv->pci_dev, rxb->dma_addr, + CX2_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); + list_add_tail(&rxb->list, &priv->rxq->rx_used); + + i = (i + 1) % RX_QUEUE_SIZE; + } + + /* Backtrack one entry */ + priv->rxq->processed = (i ? i : RX_QUEUE_SIZE) - 1; + + ipw_rx_queue_restock(priv); +} + +static void ipw_abort_scan(struct ipw_priv *priv) +{ + int err; + + if (priv->status & STATUS_SCAN_ABORTING) { + IPW_DEBUG_HC("Ignoring concurrent scan abort request.\n"); + return; + } + priv->status |= STATUS_SCAN_ABORTING; + + err = ipw_send_scan_abort(priv); + if (err) + IPW_DEBUG_HC("Request to abort scan failed.\n"); +} + +static int ipw_request_scan(struct ipw_priv *priv) +{ + struct ipw_scan_request_ext scan; + int channel_index = 0; + int i, err, scan_type; + + if (priv->status & STATUS_EXIT_PENDING) { + IPW_DEBUG_SCAN("Aborting scan due to device shutdown\n"); + priv->status |= STATUS_SCAN_PENDING; + return 0; + } + + if (priv->status & STATUS_SCANNING) { + IPW_DEBUG_HC("Concurrent scan requested. Aborting first.\n"); + priv->status |= STATUS_SCAN_PENDING; + ipw_abort_scan(priv); + return 0; + } + + if (priv->status & STATUS_SCAN_ABORTING) { + IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n"); + priv->status |= STATUS_SCAN_PENDING; + return 0; + } + + if (priv->status & STATUS_RF_KILL_MASK) { + IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n"); + priv->status |= STATUS_SCAN_PENDING; + return 0; + } + + memset(&scan, 0, sizeof(scan)); + + scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = 20; + scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] = 20; + scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = 20; + + scan.full_scan_index = ieee80211_get_scans(priv->ieee); + /* If we are roaming, then make this a directed scan for the current + * network. Otherwise, ensure that every other scan is a fast + * channel hop scan */ + if ((priv->status & STATUS_ROAMING) + || (!(priv->status & STATUS_ASSOCIATED) + && (priv->config & CFG_STATIC_ESSID) + && (scan.full_scan_index % 2))) { + err = ipw_send_ssid(priv, priv->essid, priv->essid_len); + if (err) { + IPW_DEBUG_HC("Attempt to send SSID command failed.\n"); + return err; + } + + scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN; + } else { + scan_type = IPW_SCAN_ACTIVE_BROADCAST_SCAN; + } + + if (priv->ieee->freq_band & IEEE80211_52GHZ_BAND) { + int start = channel_index; + for (i = 0; i < MAX_A_CHANNELS; i++) { + if (band_a_active_channel[i] == 0) + break; + if ((priv->status & STATUS_ASSOCIATED) && + band_a_active_channel[i] == priv->channel) + continue; + channel_index++; + scan.channels_list[channel_index] = + band_a_active_channel[i]; + ipw_set_scan_type(&scan, channel_index, scan_type); + } + + if (start != channel_index) { + scan.channels_list[start] = (u8) (IPW_A_MODE << 6) | + (channel_index - start); + channel_index++; + } + } + + if (priv->ieee->freq_band & IEEE80211_24GHZ_BAND) { + int start = channel_index; + for (i = 0; i < MAX_B_CHANNELS; i++) { + if (band_b_active_channel[i] == 0) + break; + if ((priv->status & STATUS_ASSOCIATED) && + band_b_active_channel[i] == priv->channel) + continue; + channel_index++; + scan.channels_list[channel_index] = + band_b_active_channel[i]; + ipw_set_scan_type(&scan, channel_index, scan_type); + } + + if (start != channel_index) { + scan.channels_list[start] = (u8) (IPW_B_MODE << 6) | + (channel_index - start); + } + } + + err = ipw_send_scan_request_ext(priv, &scan); + if (err) { + IPW_DEBUG_HC("Sending scan command failed: %08X\n", err); + return -EIO; + } + + priv->status |= STATUS_SCANNING; + priv->status &= ~STATUS_SCAN_PENDING; + + return 0; +} + +/* + * This file defines the Wireless Extension handlers. It does not + * define any methods of hardware manipulation and relies on the + * functions defined in ipw_main to provide the HW interaction. + * + * The exception to this is the use of the ipw_get_ordinal() + * function used to poll the hardware vs. making unecessary calls. + * + */ + +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + return 0; +} + +static int ipw_set_channel(struct ipw_priv *priv, u8 channel) +{ + if (channel == 0) { + IPW_DEBUG_INFO("Setting channel to ANY (0)\n"); + priv->config &= ~CFG_STATIC_CHANNEL; + if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED | + STATUS_ASSOCIATING))) { + IPW_DEBUG_ASSOC("Attempting to associate with new " + "parameters.\n"); + ipw_associate(priv); + } + + return 0; + } + + priv->config |= CFG_STATIC_CHANNEL; + + if (priv->channel == channel) { + IPW_DEBUG_INFO("Request to set channel to current value (%d)\n", + channel); + return 0; + } + + IPW_DEBUG_INFO("Setting channel to %i\n", (int)channel); + priv->channel = channel; + + /* If we are currently associated, or trying to associate + * then see if this is a new channel (causing us to disassociate) */ + if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + IPW_DEBUG_ASSOC("Disassociating due to channel change.\n"); + ipw_disassociate(priv); + } else { + ipw_associate(priv); + } + + return 0; +} + +static int ipw_wx_set_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + struct iw_freq *fwrq = &wrqu->freq; + + /* if setting by freq convert to channel */ + if (fwrq->e == 1) { + if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) { + int f = fwrq->m / 100000; + int c = 0; + + while ((c < REG_MAX_CHANNEL) && + (f != ipw_frequencies[c])) + c++; + + /* hack to fall through */ + fwrq->e = 0; + fwrq->m = c + 1; + } + } + + if (fwrq->e > 0 || fwrq->m > 1000) + return -EOPNOTSUPP; + + IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m); + return ipw_set_channel(priv, (u8) fwrq->m); + + return 0; +} + +static int ipw_wx_get_freq(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + wrqu->freq.e = 0; + + /* If we are associated, trying to associate, or have a statically + * configured CHANNEL then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_CHANNEL || + priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) + wrqu->freq.m = priv->channel; + else + wrqu->freq.m = 0; + + IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel); + return 0; +} + +static int ipw_wx_set_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int err = 0; + + IPW_DEBUG_WX("Set MODE: %d\n", wrqu->mode); + + if (wrqu->mode == priv->ieee->iw_mode) + return 0; + + switch (wrqu->mode) { +#ifdef CONFIG_IPW_PROMISC + case IW_MODE_MONITOR: +#endif + case IW_MODE_ADHOC: + case IW_MODE_INFRA: + break; + case IW_MODE_AUTO: + wrqu->mode = IW_MODE_INFRA; + break; + default: + return -EINVAL; + } + +#ifdef CONFIG_IPW_PROMISC + if (priv->ieee->iw_mode == IW_MODE_MONITOR) + priv->net_dev->type = ARPHRD_ETHER; + + if (wrqu->mode == IW_MODE_MONITOR) + priv->net_dev->type = ARPHRD_IEEE80211; +#endif /* CONFIG_IPW_PROMISC */ + +#ifdef CONFIG_PM + /* Free the existing firmware and reset the fw_loaded + * flag so ipw_load() will bring in the new firmawre */ + if (fw_loaded) { + fw_loaded = 0; + } + + release_firmware(bootfw); + release_firmware(ucode); + release_firmware(firmware); + bootfw = ucode = firmware = NULL; +#endif + + priv->ieee->iw_mode = wrqu->mode; + ipw_adapter_restart(priv); + + return err; +} + +static int ipw_wx_get_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + wrqu->mode = priv->ieee->iw_mode; + IPW_DEBUG_WX("Get MODE -> %d\n", wrqu->mode); + + return 0; +} + +#define DEFAULT_RTS_THRESHOLD 2304U +#define MIN_RTS_THRESHOLD 1U +#define MAX_RTS_THRESHOLD 2304U +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +/* Values are in microsecond */ +static const s32 timeout_duration[] = { + 350000, + 250000, + 75000, + 37000, + 25000, +}; + +static const s32 period_duration[] = { + 400000, + 700000, + 1000000, + 1000000, + 1000000 +}; + +static int ipw_wx_get_range(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + struct iw_range *range = (struct iw_range *)extra; + u16 val; + int i; + + wrqu->data.length = sizeof(*range); + memset(range, 0, sizeof(*range)); + + /* 54Mbs == ~27 Mb/s real (802.11g) */ + range->throughput = 27 * 1000 * 1000; + + range->max_qual.qual = 100; + /* TODO: Find real max RSSI and stick here */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + range->max_qual.updated = 7; /* Updated all three */ + + range->avg_qual.qual = 70; + /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + range->avg_qual.level = 0; /* FIXME to real average level */ + range->avg_qual.noise = 0; + range->avg_qual.updated = 7; /* Updated all three */ + + range->num_bitrates = min(priv->rates.num_rates, (u8) IW_MAX_BITRATES); + + for (i = 0; i < range->num_bitrates; i++) + range->bitrate[i] = (priv->rates.supported_rates[i] & 0x7F) * + 500000; + + range->max_rts = DEFAULT_RTS_THRESHOLD; + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = WEP_KEYS; + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 16; + + range->num_channels = FREQ_COUNT; + + val = 0; + for (i = 0; i < FREQ_COUNT; i++) { + range->freq[val].i = i + 1; + range->freq[val].m = ipw_frequencies[i] * 100000; + range->freq[val].e = 1; + val++; + + if (val == IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = val; + + IPW_DEBUG_WX("GET Range\n"); + return 0; +} + +static int ipw_wx_set_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + static const unsigned char any[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + static const unsigned char off[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) + return -EINVAL; + + if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) || + !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) { + /* we disable mandatory BSSID association */ + IPW_DEBUG_WX("Setting AP BSSID to ANY\n"); + priv->config &= ~CFG_STATIC_BSSID; + if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED | + STATUS_ASSOCIATING))) { + IPW_DEBUG_ASSOC("Attempting to associate with new " + "parameters.\n"); + ipw_associate(priv); + } + + return 0; + } + + priv->config |= CFG_STATIC_BSSID; + if (!memcmp(priv->bssid, wrqu->ap_addr.sa_data, ETH_ALEN)) { + IPW_DEBUG_WX("BSSID set to current BSSID.\n"); + return 0; + } + + IPW_DEBUG_WX("Setting mandatory BSSID to " MAC_FMT "\n", + MAC_ARG(wrqu->ap_addr.sa_data)); + + memcpy(priv->bssid, wrqu->ap_addr.sa_data, ETH_ALEN); + + /* If we are currently associated, or trying to associate + * then see if this is a new BSSID (causing us to disassociate) */ + if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + IPW_DEBUG_ASSOC("Disassociating due to BSSID change.\n"); + ipw_disassociate(priv); + } else { + ipw_associate(priv); + } + + return 0; +} + +static int ipw_wx_get_wap(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + /* If we are associated, trying to associate, or have a statically + * configured BSSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_BSSID || + priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + wrqu->ap_addr.sa_family = ARPHRD_ETHER; + memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN); + } else + memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); + + IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n", + MAC_ARG(wrqu->ap_addr.sa_data)); + return 0; +} + +static int ipw_wx_set_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + char *essid = ""; /* ANY */ + int length = 0; + + if (wrqu->essid.flags && wrqu->essid.length) { + length = wrqu->essid.length - 1; + essid = extra; + } + if (length == 0) { + IPW_DEBUG_WX("Setting ESSID to ANY\n"); + priv->config &= ~CFG_STATIC_ESSID; + if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED | + STATUS_ASSOCIATING))) { + IPW_DEBUG_ASSOC("Attempting to associate with new " + "parameters.\n"); + ipw_associate(priv); + } + + return 0; + } + + length = min(length, IW_ESSID_MAX_SIZE); + + priv->config |= CFG_STATIC_ESSID; + + if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) { + IPW_DEBUG_WX("ESSID set to current ESSID.\n"); + return 0; + } + + IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length), + length); + + priv->essid_len = length; + memcpy(priv->essid, essid, priv->essid_len); + + /* If we are currently associated, or trying to associate + * then see if this is a new ESSID (causing us to disassociate) */ + if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + IPW_DEBUG_ASSOC("Disassociating due to ESSID change.\n"); + ipw_disassociate(priv); + } else { + ipw_associate(priv); + } + + return 0; +} + +static int ipw_wx_get_essid(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + /* If we are associated, trying to associate, or have a statically + * configured ESSID then return that; otherwise return ANY */ + if (priv->config & CFG_STATIC_ESSID || + priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + IPW_DEBUG_WX("Getting essid: '%s'\n", + escape_essid(priv->essid, priv->essid_len)); + memcpy(extra, priv->essid, priv->essid_len); + wrqu->essid.length = priv->essid_len; + wrqu->essid.flags = 1; /* active */ + } else { + IPW_DEBUG_WX("Getting essid: ANY\n"); + wrqu->essid.length = 0; + wrqu->essid.flags = 0; /* active */ + } + + return 0; +} + +static int ipw_wx_set_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + IPW_DEBUG_WX("Setting nick to '%s'\n", extra); + if (wrqu->data.length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick)); + memset(priv->nick, 0, sizeof(priv->nick)); + memcpy(priv->nick, extra, wrqu->data.length); + IPW_DEBUG_TRACE("<<\n"); + return 0; + +} + +static int ipw_wx_get_nick(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + IPW_DEBUG_WX("Getting nick\n"); + wrqu->data.length = strlen(priv->nick) + 1; + memcpy(extra, priv->nick, wrqu->data.length); + wrqu->data.flags = 1; /* active */ + return 0; +} + +static int ipw_wx_set_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu); + return -EOPNOTSUPP; +} + +static int ipw_wx_get_rate(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + wrqu->bitrate.value = priv->last_rate; + + IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value); + return 0; +} + +static int ipw_wx_set_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + if (wrqu->rts.disabled) + priv->rts_threshold = DEFAULT_RTS_THRESHOLD; + else { + if (wrqu->rts.value < MIN_RTS_THRESHOLD || + wrqu->rts.value > MAX_RTS_THRESHOLD) + return -EINVAL; + + priv->rts_threshold = wrqu->rts.value; + } + + ipw_send_rts_threshold(priv, priv->rts_threshold); + IPW_DEBUG_WX("SET RTS Threshold -> %d \n", priv->rts_threshold); + return 0; +} + +static int ipw_wx_get_rts(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + wrqu->rts.value = priv->rts_threshold; + wrqu->rts.fixed = 0; /* no auto select */ + wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD); + + IPW_DEBUG_WX("GET RTS Threshold -> %d \n", wrqu->rts.value); + return 0; +} + +static int ipw_wx_set_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + struct ipw_tx_power tx_power; + int i; + + if (ipw_radio_kill_sw(priv, wrqu->power.disabled)) + return -EINPROGRESS; + + if (wrqu->power.flags != IW_TXPOW_DBM) + return -EINVAL; + + if ((wrqu->power.value > 20) || (wrqu->power.value < -12)) + return -EINVAL; + + priv->tx_power = wrqu->power.value; + + memset(&tx_power, 0, sizeof(tx_power)); + + /* configure device for 'G' band */ + tx_power.ieee_mode = IPW_G_MODE; + tx_power.num_channels = 11; + for (i = 0; i < 11; i++) { + tx_power.channels_tx_power[i].channel_number = i + 1; + tx_power.channels_tx_power[i].tx_power = priv->tx_power; + } + if (ipw_send_tx_power(priv, &tx_power)) + goto error; + + /* configure device to also handle 'B' band */ + tx_power.ieee_mode = IPW_B_MODE; + if (ipw_send_tx_power(priv, &tx_power)) + goto error; + + return 0; + + error: + return -EIO; +} + +static int ipw_wx_get_txpow(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + wrqu->power.value = priv->tx_power; + wrqu->power.fixed = 1; + wrqu->power.flags = IW_TXPOW_DBM; + wrqu->power.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0; + + IPW_DEBUG_WX("GET TX Power -> %s %d \n", + wrqu->power.disabled ? "ON" : "OFF", wrqu->power.value); + + return 0; +} + +static int ipw_wx_set_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + if (wrqu->frag.disabled) + priv->ieee->fts = DEFAULT_FTS; + else { + if (wrqu->frag.value < MIN_FRAG_THRESHOLD || + wrqu->frag.value > MAX_FRAG_THRESHOLD) + return -EINVAL; + + priv->ieee->fts = wrqu->frag.value & ~0x1; + } + + ipw_send_frag_threshold(priv, wrqu->frag.value); + IPW_DEBUG_WX("SET Frag Threshold -> %d \n", wrqu->frag.value); + return 0; +} + +static int ipw_wx_get_frag(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + wrqu->frag.value = priv->ieee->fts; + wrqu->frag.fixed = 0; /* no auto select */ + wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FTS); + + IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value); + + return 0; +} + +static int ipw_wx_set_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu); + return -EOPNOTSUPP; +} + +static int ipw_wx_get_retry(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu); + return -EOPNOTSUPP; +} + +static int ipw_wx_set_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + IPW_DEBUG_WX("Start scan\n"); + if (ipw_request_scan(priv)) + return -EIO; + return 0; +} + +static int ipw_wx_get_scan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra); +} + +static int ipw_wx_set_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key); +} + +static int ipw_wx_get_encode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *key) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key); +} + +static int ipw_wx_set_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int err; + + if (wrqu->power.disabled) { + priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); + err = ipw_send_power_mode(priv, IPW_POWER_MODE_CAM); + if (err) { + IPW_DEBUG_WX("failed setting power mode.\n"); + return err; + } + + IPW_DEBUG_WX("SET Power Management Mode -> off\n"); + + return 0; + } + + switch (wrqu->power.flags & IW_POWER_MODE) { + case IW_POWER_ON: /* If not specified */ + case IW_POWER_MODE: /* If set all mask */ + case IW_POWER_ALL_R: /* If explicitely state all */ + break; + default: /* Otherwise we don't support it */ + IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", + wrqu->power.flags); + return -EOPNOTSUPP; + } + + /* If the user hasn't specified a power management mode yet, default + * to BATTERY */ + if (IPW_POWER_LEVEL(priv->power_mode) == IPW_POWER_AC) + priv->power_mode = IPW_POWER_ENABLED | IPW_POWER_BATTERY; + else + priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; + err = ipw_send_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); + if (err) { + IPW_DEBUG_WX("failed setting power mode.\n"); + return err; + } + + IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode); + + return 0; +} + +static int ipw_wx_get_power(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + if (!(priv->power_mode & IPW_POWER_ENABLED)) { + wrqu->power.disabled = 1; + } else { + wrqu->power.disabled = 0; + } + + IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode); + + return 0; +} + +static int ipw_wx_set_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int mode = *(int *)extra; + int err; + + if ((mode < 1) || (mode > IPW_POWER_LIMIT)) { + mode = IPW_POWER_AC; + priv->power_mode = mode; + } else { + priv->power_mode = IPW_POWER_ENABLED | mode; + } + + if (priv->power_mode != mode) { + err = ipw_send_power_mode(priv, mode); + + if (err) { + IPW_DEBUG_WX("failed setting power mode.\n"); + return err; + } + } + + return 0; +} + +#define MAX_WX_STRING 80 +static int ipw_wx_get_powermode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int level = IPW_POWER_LEVEL(priv->power_mode); + char *p = extra; + + p += snprintf(p, MAX_WX_STRING, "Power save level: %d ", level); + + switch (level) { + case IPW_POWER_AC: + p += snprintf(p, MAX_WX_STRING - (p - extra), "(AC)"); + break; + case IPW_POWER_BATTERY: + p += snprintf(p, MAX_WX_STRING - (p - extra), "(BATTERY)"); + break; + default: + p += snprintf(p, MAX_WX_STRING - (p - extra), + "(Timeout %dms, Period %dms)", + timeout_duration[level - 1] / 1000, + period_duration[level - 1] / 1000); + } + + if (!(priv->power_mode & IPW_POWER_ENABLED)) + p += snprintf(p, MAX_WX_STRING - (p - extra), " OFF"); + + wrqu->data.length = p - extra + 1; + + return 0; +} + +static int ipw_wx_set_wireless_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int mode = *(int *)extra; + u8 band = 0, modulation = 0; + + if (mode == 0 || mode & ~IEEE_MODE_MASK) { + IPW_WARNING("Attempt to set invalid wireless mode: %d\n", mode); + return -EINVAL; + } + + if (priv->adapter == IPW_2915ABG) { + priv->ieee->abg_ture = 1; + if (mode & IEEE_A) { + band |= IEEE80211_52GHZ_BAND; + modulation |= IEEE80211_OFDM_MODULATION; + } else + priv->ieee->abg_ture = 0; + } else { + if (mode & IEEE_A) { + IPW_WARNING("Attempt to set 2200BG into " + "802.11a mode\n"); + return -EINVAL; + } + + priv->ieee->abg_ture = 0; + } + + if (mode & IEEE_B) { + band |= IEEE80211_24GHZ_BAND; + modulation |= IEEE80211_CCK_MODULATION; + } else + priv->ieee->abg_ture = 0; + + if (mode & IEEE_G) { + band |= IEEE80211_24GHZ_BAND; + modulation |= IEEE80211_OFDM_MODULATION; + } else + priv->ieee->abg_ture = 0; + + priv->ieee->mode = mode; + priv->ieee->freq_band = band; + priv->ieee->modulation = modulation; + init_supported_rates(priv, &priv->rates); + + /* If we are currently associated, or trying to associate + * then see if this is a new configuration (causing us to + * disassociate) */ + if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) { + /* The resulting association will trigger + * the new rates to be sent to the device */ + IPW_DEBUG_ASSOC("Disassociating due to mode change.\n"); + ipw_disassociate(priv); + } else + ipw_send_supported_rates(priv, &priv->rates); + + IPW_DEBUG_WX("PRIV SET MODE: %c%c%c\n", + mode & IEEE_A ? 'a' : '.', + mode & IEEE_B ? 'b' : '.', mode & IEEE_G ? 'g' : '.'); + return 0; +} + +static int ipw_wx_get_wireless_mode(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + switch (priv->ieee->freq_band) { + case IEEE80211_24GHZ_BAND: + switch (priv->ieee->modulation) { + case IEEE80211_CCK_MODULATION: + strncpy(extra, "802.11b (2)", MAX_WX_STRING); + break; + case IEEE80211_OFDM_MODULATION: + strncpy(extra, "802.11g (4)", MAX_WX_STRING); + break; + default: + strncpy(extra, "802.11bg (6)", MAX_WX_STRING); + break; + } + break; + + case IEEE80211_52GHZ_BAND: + strncpy(extra, "802.11a (1)", MAX_WX_STRING); + break; + + default: /* Mixed Band */ + switch (priv->ieee->modulation) { + case IEEE80211_CCK_MODULATION: + strncpy(extra, "802.11ab (3)", MAX_WX_STRING); + break; + case IEEE80211_OFDM_MODULATION: + strncpy(extra, "802.11ag (5)", MAX_WX_STRING); + break; + default: + strncpy(extra, "802.11abg (7)", MAX_WX_STRING); + break; + } + break; + } + + IPW_DEBUG_WX("PRIV GET MODE: %s\n", extra); + + wrqu->data.length = strlen(extra) + 1; + + return 0; +} + +#ifdef CONFIG_IPW_PROMISC +static int ipw_wx_set_promisc(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int *parms = (int *)extra; + int enable = (parms[0] > 0); + + IPW_DEBUG_WX("SET PROMISC: %d %d\n", enable, parms[1]); + if (enable) { + if (priv->ieee->iw_mode != IW_MODE_MONITOR) { + priv->net_dev->type = ARPHRD_IEEE80211; + ipw_adapter_restart(priv); + } + + ipw_set_channel(priv, parms[1]); + } else { + if (priv->ieee->iw_mode != IW_MODE_MONITOR) + return 0; + priv->net_dev->type = ARPHRD_ETHER; + ipw_adapter_restart(priv); + } + return 0; +} + +static int ipw_wx_reset(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + IPW_DEBUG_WX("RESET\n"); + ipw_adapter_restart(priv); + return 0; +} +#endif // CONFIG_IPW_PROMISC + +/* Rebase the WE IOCTLs to zero for the handler array */ +#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] +static iw_handler ipw_wx_handlers[] = { + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, + IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, + IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, + IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, + IW_IOCTL(SIOCGIWMODE) = ipw_wx_get_mode, + IW_IOCTL(SIOCGIWRANGE) = ipw_wx_get_range, + IW_IOCTL(SIOCSIWAP) = ipw_wx_set_wap, + IW_IOCTL(SIOCGIWAP) = ipw_wx_get_wap, + IW_IOCTL(SIOCSIWSCAN) = ipw_wx_set_scan, + IW_IOCTL(SIOCGIWSCAN) = ipw_wx_get_scan, + IW_IOCTL(SIOCSIWESSID) = ipw_wx_set_essid, + IW_IOCTL(SIOCGIWESSID) = ipw_wx_get_essid, + IW_IOCTL(SIOCSIWNICKN) = ipw_wx_set_nick, + IW_IOCTL(SIOCGIWNICKN) = ipw_wx_get_nick, + IW_IOCTL(SIOCSIWRATE) = ipw_wx_set_rate, + IW_IOCTL(SIOCGIWRATE) = ipw_wx_get_rate, + IW_IOCTL(SIOCSIWRTS) = ipw_wx_set_rts, + IW_IOCTL(SIOCGIWRTS) = ipw_wx_get_rts, + IW_IOCTL(SIOCSIWFRAG) = ipw_wx_set_frag, + IW_IOCTL(SIOCGIWFRAG) = ipw_wx_get_frag, + IW_IOCTL(SIOCSIWTXPOW) = ipw_wx_set_txpow, + IW_IOCTL(SIOCGIWTXPOW) = ipw_wx_get_txpow, + IW_IOCTL(SIOCSIWRETRY) = ipw_wx_set_retry, + IW_IOCTL(SIOCGIWRETRY) = ipw_wx_get_retry, + IW_IOCTL(SIOCSIWENCODE) = ipw_wx_set_encode, + IW_IOCTL(SIOCGIWENCODE) = ipw_wx_get_encode, + IW_IOCTL(SIOCSIWPOWER) = ipw_wx_set_power, + IW_IOCTL(SIOCGIWPOWER) = ipw_wx_get_power, +}; + +#define IPW_PRIV_SET_POWER SIOCIWFIRSTPRIV +#define IPW_PRIV_GET_POWER SIOCIWFIRSTPRIV+1 +#define IPW_PRIV_SET_MODE SIOCIWFIRSTPRIV+2 +#define IPW_PRIV_GET_MODE SIOCIWFIRSTPRIV+3 +#define IPW_PRIV_SET_PROMISC SIOCIWFIRSTPRIV+4 +#define IPW_PRIV_RESET SIOCIWFIRSTPRIV+5 + +static struct iw_priv_args ipw_priv_args[] = { + { + .cmd = IPW_PRIV_SET_POWER, + .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + .name = "set_power"}, + { + .cmd = IPW_PRIV_GET_POWER, + .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING, + .name = "get_power"}, + { + .cmd = IPW_PRIV_SET_MODE, + .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + .name = "set_mode"}, + { + .cmd = IPW_PRIV_GET_MODE, + .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING, + .name = "get_mode"}, +#ifdef CONFIG_IPW_PROMISC + { + IPW_PRIV_SET_PROMISC, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"}, + { + IPW_PRIV_RESET, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"}, +#endif /* CONFIG_IPW_PROMISC */ +}; + +static iw_handler ipw_priv_handler[] = { + ipw_wx_set_powermode, + ipw_wx_get_powermode, + ipw_wx_set_wireless_mode, + ipw_wx_get_wireless_mode, +#ifdef CONFIG_IPW_PROMISC + ipw_wx_set_promisc, + ipw_wx_reset, +#endif +}; + +static struct iw_handler_def ipw_wx_handler_def = { + .standard = ipw_wx_handlers, + .num_standard = ARRAY_SIZE(ipw_wx_handlers), + .num_private = ARRAY_SIZE(ipw_priv_handler), + .num_private_args = ARRAY_SIZE(ipw_priv_args), + .private = ipw_priv_handler, + .private_args = ipw_priv_args, +}; + +/* + * Get wireless statistics. + * Called by /proc/net/wireless + * Also called by SIOCGIWSTATS + */ +static struct iw_statistics *ipw_get_wireless_stats(struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + struct iw_statistics *wstats; + + wstats = &priv->wstats; + + /* if hw is disabled, then ipw2100_get_ordinal() can't be called. + * ipw2100_wx_wireless_stats seems to be called before fw is + * initialized. STATUS_ASSOCIATED will only be set if the hw is up + * and associated; if not associcated, the values are all meaningless + * anyway, so set them all to NULL and INVALID */ + if (!(priv->status & STATUS_ASSOCIATED)) { + wstats->miss.beacon = 0; + wstats->discard.retries = 0; + wstats->qual.qual = 0; + wstats->qual.level = 0; + wstats->qual.noise = 0; + wstats->qual.updated = 7; + wstats->qual.updated |= IW_QUAL_NOISE_INVALID | + IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; + return wstats; + } + + wstats->qual.qual = priv->quality; + wstats->qual.level = average_value(&priv->average_rssi); + wstats->qual.noise = average_value(&priv->average_noise); + wstats->qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | + IW_QUAL_NOISE_UPDATED; + + wstats->miss.beacon = average_value(&priv->average_missed_beacons); + wstats->discard.retries = priv->last_tx_failures; + wstats->discard.code = priv->ieee->ieee_stats.rx_discards_undecryptable; + +/* if (ipw_get_ordinal(priv, IPW_ORD_STAT_TX_RETRY, &tx_retry, &len)) + goto fail_get_ordinal; + wstats->discard.retries += tx_retry; */ + + return wstats; +} + +/* net device stuff */ + +static inline void init_sys_config(struct ipw_sys_config *sys_config) +{ + memset(sys_config, 0, sizeof(struct ipw_sys_config)); + sys_config->bt_coexistence = 1; /* We may need to look into prvStaBtConfig */ + sys_config->answer_broadcast_ssid_probe = 0; + sys_config->accept_all_data_frames = 0; + sys_config->accept_non_directed_frames = 1; + sys_config->exclude_unicast_unencrypted = 0; + sys_config->disable_unicast_decryption = 1; + sys_config->exclude_multicast_unencrypted = 0; + sys_config->disable_multicast_decryption = 1; + sys_config->antenna_diversity = CFG_SYS_ANTENNA_BOTH; + sys_config->pass_crc_to_host = 0; /* TODO: See if 1 gives us FCS */ + sys_config->dot11g_auto_detection = 0; + sys_config->enable_cts_to_self = 0; + sys_config->bt_coexist_collision_thr = 0; + sys_config->pass_noise_stats_to_host = 1; +} + +static int ipw_net_open(struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + IPW_DEBUG_INFO("dev->open\n"); + /* we should be verifying the device is ready to be opened */ + if (!(priv->status & STATUS_RF_KILL_MASK) && + (priv->status & STATUS_ASSOCIATED)) + netif_start_queue(dev); + return 0; +} + +static int ipw_net_stop(struct net_device *dev) +{ + IPW_DEBUG_INFO("dev->close\n"); + netif_stop_queue(dev); + return 0; +} + +/* +todo: + +modify to send one tfd per fragment instead of using chunking. otherwise +we need to heavily modify the ieee80211_skb_to_txb. +*/ + +static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) + txb->fragments[0]->data; + int i = 0; + struct tfd_frame *tfd; + struct clx2_tx_queue *txq = &priv->txq[0]; + struct clx2_queue *q = &txq->q; + u8 id, hdr_len, unicast; + u16 remaining_bytes; + + switch (priv->ieee->iw_mode) { + case IW_MODE_ADHOC: + hdr_len = IEEE80211_3ADDR_LEN; + unicast = !is_broadcast_ether_addr(hdr->addr1) && + !is_multicast_ether_addr(hdr->addr1); + id = ipw_find_station(priv, hdr->addr1); + if (id == IPW_INVALID_STATION) { + id = ipw_add_station(priv, hdr->addr1); + if (id == IPW_INVALID_STATION) { + IPW_WARNING("Attempt to send data to " + "invalid cell: " MAC_FMT "\n", + MAC_ARG(hdr->addr1)); + goto drop; + } + } + break; + + case IW_MODE_INFRA: + default: + unicast = !is_broadcast_ether_addr(hdr->addr3) && + !is_multicast_ether_addr(hdr->addr3); + hdr_len = IEEE80211_3ADDR_LEN; + id = 0; + break; + } + + tfd = &txq->bd[q->first_empty]; + txq->txb[q->first_empty] = txb; + memset(tfd, 0, sizeof(*tfd)); + tfd->u.data.station_number = id; + + tfd->control_flags.message_type = TX_FRAME_TYPE; + tfd->control_flags.control_bits = TFD_NEED_IRQ_MASK; + + tfd->u.data.cmd_id = DINO_CMD_TX; + tfd->u.data.len = txb->payload_size; + remaining_bytes = txb->payload_size; + if (unlikely(!unicast)) + tfd->u.data.tx_flags = DCT_FLAG_NO_WEP; + else + tfd->u.data.tx_flags = DCT_FLAG_NO_WEP | DCT_FLAG_ACK_REQD; + + if (priv->assoc_request.ieee_mode == IPW_B_MODE) + tfd->u.data.tx_flags_ext = DCT_FLAG_EXT_MODE_CCK; + else + tfd->u.data.tx_flags_ext = DCT_FLAG_EXT_MODE_OFDM; + + if (priv->config & CFG_PREAMBLE) + tfd->u.data.tx_flags |= DCT_FLAG_SHORT_PREMBL; + + memcpy(&tfd->u.data.tfd.tfd_24.mchdr, hdr, hdr_len); + + /* payload */ + tfd->u.data.num_chunks = min((u8) (NUM_TFD_CHUNKS - 2), txb->nr_frags); + for (i = 0; i < tfd->u.data.num_chunks; i++) { + IPW_DEBUG_TX("Dumping TX packet frag %i of %i (%d bytes):\n", + i, tfd->u.data.num_chunks, + txb->fragments[i]->len - hdr_len); + printk_buf(IPW_DL_TX, txb->fragments[i]->data + hdr_len, + txb->fragments[i]->len - hdr_len); + + tfd->u.data.chunk_ptr[i] = + pci_map_single(priv->pci_dev, + txb->fragments[i]->data + hdr_len, + txb->fragments[i]->len - hdr_len, + PCI_DMA_TODEVICE); + tfd->u.data.chunk_len[i] = txb->fragments[i]->len - hdr_len; + } + + if (i != txb->nr_frags) { + struct sk_buff *skb; + u16 remaining_bytes = 0; + int j; + + for (j = i; j < txb->nr_frags; j++) + remaining_bytes += txb->fragments[j]->len - hdr_len; + + printk(KERN_INFO "Trying to reallocate for %d bytes\n", + remaining_bytes); + skb = alloc_skb(remaining_bytes, GFP_ATOMIC); + if (skb != NULL) { + tfd->u.data.chunk_len[i] = remaining_bytes; + for (j = i; j < txb->nr_frags; j++) { + int size = txb->fragments[j]->len - hdr_len; + printk(KERN_INFO "Adding frag %d %d...\n", + j, size); + memcpy(skb_put(skb, size), + txb->fragments[j]->data + hdr_len, size); + } + dev_kfree_skb_any(txb->fragments[i]); + txb->fragments[i] = skb; + tfd->u.data.chunk_ptr[i] = + pci_map_single(priv->pci_dev, skb->data, + tfd->u.data.chunk_len[i], + PCI_DMA_TODEVICE); + tfd->u.data.num_chunks++; + } + } + + /* kick DMA */ + q->first_empty = ipw_queue_inc_wrap(q->first_empty, q->n_bd); + ipw_write32(priv, q->reg_w, q->first_empty); + + if (ipw_queue_space(q) < q->high_mark) + netif_stop_queue(priv->net_dev); + + return; + + drop: + IPW_DEBUG_DROP("Silently dropping Tx packet.\n"); + ieee80211_txb_free(txb); +} + +static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb, + struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + unsigned long flags; + + IPW_DEBUG_TX("dev->xmit(%d bytes)\n", txb->payload_size); + + spin_lock_irqsave(&priv->lock, flags); + + if (!(priv->status & STATUS_ASSOCIATED)) { + IPW_DEBUG_INFO("Tx attempt while not associated.\n"); + priv->ieee->stats.tx_carrier_errors++; + netif_stop_queue(dev); + goto fail_unlock; + } + + ipw_tx_skb(priv, txb); + + spin_unlock_irqrestore(&priv->lock, flags); + return 0; + + fail_unlock: + spin_unlock_irqrestore(&priv->lock, flags); + return 1; +} + +static struct net_device_stats *ipw_net_get_stats(struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + priv->ieee->stats.tx_packets = priv->tx_packets; + priv->ieee->stats.rx_packets = priv->rx_packets; + return &priv->ieee->stats; +} + +static void ipw_net_set_multicast_list(struct net_device *dev) +{ + +} + +static int ipw_net_set_mac_address(struct net_device *dev, void *p) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + struct sockaddr *addr = p; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + priv->config |= CFG_CUSTOM_MAC; + memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); + printk(KERN_INFO "%s: Setting MAC to " MAC_FMT "\n", + priv->net_dev->name, MAC_ARG(priv->mac_addr)); + ipw_adapter_restart(priv); + return 0; +} + +static void ipw_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ipw_priv *p = ieee80211_priv(dev); + char vers[64]; + char date[32]; + u32 len; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + + len = sizeof(vers); + ipw_get_ordinal(p, IPW_ORD_STAT_FW_VERSION, vers, &len); + len = sizeof(date); + ipw_get_ordinal(p, IPW_ORD_STAT_FW_DATE, date, &len); + + snprintf(info->fw_version, sizeof(info->fw_version), "%s (%s)", + vers, date); + strcpy(info->bus_info, pci_name(p->pci_dev)); + info->eedump_len = CX2_EEPROM_IMAGE_SIZE; +} + +static u32 ipw_ethtool_get_link(struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + return (priv->status & STATUS_ASSOCIATED) != 0; +} + +static int ipw_ethtool_get_eeprom_len(struct net_device *dev) +{ + return CX2_EEPROM_IMAGE_SIZE; +} + +static int ipw_ethtool_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 * bytes) +{ + struct ipw_priv *p = ieee80211_priv(dev); + + if (eeprom->offset + eeprom->len > CX2_EEPROM_IMAGE_SIZE) + return -EINVAL; + + memcpy(bytes, &((u8 *) p->eeprom)[eeprom->offset], eeprom->len); + return 0; +} + +static int ipw_ethtool_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 * bytes) +{ + struct ipw_priv *p = ieee80211_priv(dev); + int i; + + if (eeprom->offset + eeprom->len > CX2_EEPROM_IMAGE_SIZE) + return -EINVAL; + + memcpy(&((u8 *) p->eeprom)[eeprom->offset], bytes, eeprom->len); + for (i = IPW_EEPROM_DATA; + i < IPW_EEPROM_DATA + CX2_EEPROM_IMAGE_SIZE; i++) + ipw_write8(p, i, p->eeprom[i]); + + return 0; +} + +static struct ethtool_ops ipw_ethtool_ops = { + .get_link = ipw_ethtool_get_link, + .get_drvinfo = ipw_ethtool_get_drvinfo, + .get_eeprom_len = ipw_ethtool_get_eeprom_len, + .get_eeprom = ipw_ethtool_get_eeprom, + .set_eeprom = ipw_ethtool_set_eeprom, +}; + +static irqreturn_t ipw_isr(int irq, void *data, struct pt_regs *regs) +{ + struct ipw_priv *priv = data; + u32 inta, inta_mask; + + if (!priv) + return IRQ_NONE; + + spin_lock(&priv->lock); + + if (!(priv->status & STATUS_INT_ENABLED)) { + /* Shared IRQ */ + goto none; + } + + inta = ipw_read32(priv, CX2_INTA_RW); + inta_mask = ipw_read32(priv, CX2_INTA_MASK_R); + + if (inta == 0xFFFFFFFF) { + /* Hardware disappeared */ + IPW_WARNING("IRQ INTA == 0xFFFFFFFF\n"); + goto none; + } + + if (!(inta & (CX2_INTA_MASK_ALL & inta_mask))) { + /* Shared interrupt */ + goto none; + } + + /* tell the device to stop sending interrupts */ + ipw_disable_interrupts(priv); + + /* ack current interrupts */ + inta &= (CX2_INTA_MASK_ALL & inta_mask); + ipw_write32(priv, CX2_INTA_RW, inta); + + /* Cache INTA value for our tasklet */ + priv->isr_inta = inta; + + tasklet_schedule(&priv->irq_tasklet); + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; + none: + spin_unlock(&priv->lock); + return IRQ_NONE; +} + +static void ipw_rf_kill(void *adapter) +{ + struct ipw_priv *priv = adapter; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (rf_kill_active(priv)) { + IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n"); + if (priv->workqueue) + queue_delayed_work(priv->workqueue, + &priv->rf_kill, 2 * HZ); + goto exit_unlock; + } + + /* RF Kill is now disabled, so bring the device back up */ + + if (!(priv->status & STATUS_RF_KILL_MASK)) { + IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " + "device\n"); + + /* we can not do an adapter restart while inside an irq lock */ + queue_work(priv->workqueue, &priv->adapter_restart); + } else + IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " + "enabled\n"); + + exit_unlock: + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int ipw_setup_deferred_work(struct ipw_priv *priv) +{ + int ret = 0; + + priv->workqueue = create_workqueue(DRV_NAME); + init_waitqueue_head(&priv->wait_command_queue); + + INIT_WORK(&priv->adhoc_check, ipw_adhoc_check, priv); + INIT_WORK(&priv->associate, ipw_associate, priv); + INIT_WORK(&priv->disassociate, ipw_disassociate, priv); + INIT_WORK(&priv->rx_replenish, ipw_rx_queue_replenish, priv); + INIT_WORK(&priv->adapter_restart, ipw_adapter_restart, priv); + INIT_WORK(&priv->rf_kill, ipw_rf_kill, priv); + INIT_WORK(&priv->up, (void (*)(void *))ipw_up, priv); + INIT_WORK(&priv->down, (void (*)(void *))ipw_down, priv); + INIT_WORK(&priv->request_scan, + (void (*)(void *))ipw_request_scan, priv); + INIT_WORK(&priv->gather_stats, + (void (*)(void *))ipw_gather_stats, priv); + INIT_WORK(&priv->abort_scan, (void (*)(void *))ipw_abort_scan, priv); + INIT_WORK(&priv->roam, ipw_roam, priv); + INIT_WORK(&priv->scan_check, ipw_scan_check, priv); + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + ipw_irq_tasklet, (unsigned long)priv); + + return ret; +} + +static void shim__set_security(struct net_device *dev, + struct ieee80211_security *sec) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + int i; + + for (i = 0; i < 4; i++) { + if (sec->flags & (1 << i)) { + priv->sec.key_sizes[i] = sec->key_sizes[i]; + if (sec->key_sizes[i] == 0) + priv->sec.flags &= ~(1 << i); + else + memcpy(priv->sec.keys[i], sec->keys[i], + sec->key_sizes[i]); + priv->sec.flags |= (1 << i); + priv->status |= STATUS_SECURITY_UPDATED; + } + } + + if ((sec->flags & SEC_ACTIVE_KEY) && + priv->sec.active_key != sec->active_key) { + if (sec->active_key <= 3) { + priv->sec.active_key = sec->active_key; + priv->sec.flags |= SEC_ACTIVE_KEY; + } else + priv->sec.flags &= ~SEC_ACTIVE_KEY; + priv->status |= STATUS_SECURITY_UPDATED; + } + + if ((sec->flags & SEC_AUTH_MODE) && + (priv->sec.auth_mode != sec->auth_mode)) { + priv->sec.auth_mode = sec->auth_mode; + priv->sec.flags |= SEC_AUTH_MODE; + if (sec->auth_mode == WLAN_AUTH_SHARED_KEY) + priv->capability |= CAP_SHARED_KEY; + else + priv->capability &= ~CAP_SHARED_KEY; + priv->status |= STATUS_SECURITY_UPDATED; + } + + if (sec->flags & SEC_ENABLED && priv->sec.enabled != sec->enabled) { + priv->sec.flags |= SEC_ENABLED; + priv->sec.enabled = sec->enabled; + priv->status |= STATUS_SECURITY_UPDATED; + if (sec->enabled) + priv->capability |= CAP_PRIVACY_ON; + else + priv->capability &= ~CAP_PRIVACY_ON; + } + + if (sec->flags & SEC_LEVEL && priv->sec.level != sec->level) { + priv->sec.level = sec->level; + priv->sec.flags |= SEC_LEVEL; + priv->status |= STATUS_SECURITY_UPDATED; + } + + /* To match current functionality of ipw2100 (which works well w/ + * various supplicants, we don't force a disassociate if the + * privacy capability changes ... */ +#if 0 + if ((priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) && + (((priv->assoc_request.capability & + WLAN_CAPABILITY_PRIVACY) && !sec->enabled) || + (!(priv->assoc_request.capability & + WLAN_CAPABILITY_PRIVACY) && sec->enabled))) { + IPW_DEBUG_ASSOC("Disassociating due to capability " + "change.\n"); + ipw_disassociate(priv); + } +#endif +} + +static int init_supported_rates(struct ipw_priv *priv, + struct ipw_supported_rates *rates) +{ + /* TODO: Mask out rates based on priv->rates_mask */ + + memset(rates, 0, sizeof(*rates)); + /* configure supported rates */ + switch (priv->ieee->freq_band) { + case IEEE80211_52GHZ_BAND: + rates->ieee_mode = IPW_A_MODE; + rates->purpose = IPW_RATE_CAPABILITIES; + ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION, + IEEE80211_OFDM_DEFAULT_RATES_MASK); + break; + + default: /* Mixed or 2.4Ghz */ + rates->ieee_mode = IPW_G_MODE; + rates->purpose = IPW_RATE_CAPABILITIES; + ipw_add_cck_scan_rates(rates, IEEE80211_CCK_MODULATION, + IEEE80211_CCK_DEFAULT_RATES_MASK); + if (priv->ieee->modulation & IEEE80211_OFDM_MODULATION) { + ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION, + IEEE80211_OFDM_DEFAULT_RATES_MASK); + } + break; + } + + return 0; +} + +static int ipw_config(struct ipw_priv *priv) +{ + int i; + struct ipw_tx_power tx_power; + + memset(&priv->sys_config, 0, sizeof(priv->sys_config)); + memset(&tx_power, 0, sizeof(tx_power)); + + /* This is only called from ipw_up, which resets/reloads the firmware + so, we don't need to first disable the card before we configure + it */ + + /* configure device for 'G' band */ + tx_power.ieee_mode = IPW_G_MODE; + tx_power.num_channels = 11; + for (i = 0; i < 11; i++) { + tx_power.channels_tx_power[i].channel_number = i + 1; + tx_power.channels_tx_power[i].tx_power = priv->tx_power; + } + if (ipw_send_tx_power(priv, &tx_power)) + goto error; + + /* configure device to also handle 'B' band */ + tx_power.ieee_mode = IPW_B_MODE; + if (ipw_send_tx_power(priv, &tx_power)) + goto error; + + /* initialize adapter address */ + if (ipw_send_adapter_address(priv, priv->net_dev->dev_addr)) + goto error; + + /* set basic system config settings */ + init_sys_config(&priv->sys_config); + if (ipw_send_system_config(priv, &priv->sys_config)) + goto error; + + init_supported_rates(priv, &priv->rates); + if (ipw_send_supported_rates(priv, &priv->rates)) + goto error; + + /* Set request-to-send threshold */ + if (priv->rts_threshold) { + if (ipw_send_rts_threshold(priv, priv->rts_threshold)) + goto error; + } + + if (ipw_set_random_seed(priv)) + goto error; + + /* final state transition to the RUN state */ + if (ipw_send_host_complete(priv)) + goto error; + + /* If configured to try and auto-associate, kick off a scan */ + if ((priv->config & CFG_ASSOCIATE) && ipw_request_scan(priv)) + goto error; + + return 0; + + error: + return -EIO; +} + +#define MAX_HW_RESTARTS 5 +static int ipw_up(struct ipw_priv *priv) +{ + int rc, i; + + if (priv->status & STATUS_EXIT_PENDING) + return -EIO; + + for (i = 0; i < MAX_HW_RESTARTS; i++) { + /* Load the microcode, firmware, and eeprom. + * Also start the clocks. */ + rc = ipw_load(priv); + if (rc) { + IPW_ERROR("Unable to load firmware: 0x%08X\n", rc); + return rc; + } + + ipw_init_ordinals(priv); + if (!(priv->config & CFG_CUSTOM_MAC)) + eeprom_parse_mac(priv, priv->mac_addr); + memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN); + + if (priv->status & STATUS_RF_KILL_MASK) + return 0; + + rc = ipw_config(priv); + if (!rc) { + IPW_DEBUG_INFO("Configured device on count %i\n", i); + priv->notif_missed_beacons = 0; + netif_start_queue(priv->net_dev); + return 0; + } else { + IPW_DEBUG_INFO("Device configuration failed: 0x%08X\n", + rc); + } + + IPW_DEBUG_INFO("Failed to config device on retry %d of %d\n", + i, MAX_HW_RESTARTS); + + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + ipw_down(priv); + } + + /* tried to restart and config the device for as long as our + * patience could withstand */ + IPW_ERROR("Unable to initialize device after %d attempts.\n", i); + return -EIO; +} + +static void ipw_down(struct ipw_priv *priv) +{ + /* Attempt to disable the card */ +#if 0 + ipw_send_card_disable(priv, 0); +#endif + + /* tell the device to stop sending interrupts */ + ipw_disable_interrupts(priv); + + /* Clear all bits but the RF Kill */ + priv->status &= STATUS_RF_KILL_MASK; + + netif_carrier_off(priv->net_dev); + netif_stop_queue(priv->net_dev); + + ipw_stop_nic(priv); +} + +/* Called by register_netdev() */ +static int ipw_net_init(struct net_device *dev) +{ + struct ipw_priv *priv = ieee80211_priv(dev); + + if (priv->status & STATUS_RF_KILL_SW) { + IPW_WARNING("Radio disabled by module parameter.\n"); + return 0; + } else if (rf_kill_active(priv)) { + IPW_WARNING("Radio Frequency Kill Switch is On:\n" + "Kill switch must be turned off for " + "wireless networking to work.\n"); + queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ); + return 0; + } + + if (ipw_up(priv)) + return -EIO; + + return 0; +} + +/* PCI driver stuff */ +static struct pci_device_id card_ids[] = { + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2701, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2702, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2711, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2712, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2721, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2722, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2731, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2732, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2741, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x103c, 0x2741, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2742, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2751, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2752, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2753, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2754, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2761, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2762, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x104f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_INTEL, 0x4220, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* BG */ + {PCI_VENDOR_ID_INTEL, 0x4221, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 2225BG */ + {PCI_VENDOR_ID_INTEL, 0x4223, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */ + {PCI_VENDOR_ID_INTEL, 0x4224, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */ + + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, card_ids); + +static struct attribute *ipw_sysfs_entries[] = { + &dev_attr_rf_kill.attr, + &dev_attr_direct_dword.attr, + &dev_attr_indirect_byte.attr, + &dev_attr_indirect_dword.attr, + &dev_attr_mem_gpio_reg.attr, + &dev_attr_command_event_reg.attr, + &dev_attr_nic_type.attr, + &dev_attr_status.attr, + &dev_attr_cfg.attr, + &dev_attr_dump_errors.attr, + &dev_attr_dump_events.attr, + &dev_attr_eeprom_delay.attr, + &dev_attr_ucode_version.attr, + &dev_attr_rtc.attr, + NULL +}; + +static struct attribute_group ipw_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = ipw_sysfs_entries, +}; + +static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = 0; + struct net_device *net_dev; + void __iomem *base; + u32 length, val; + struct ipw_priv *priv; + int band, modulation; + + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); + if (net_dev == NULL) { + err = -ENOMEM; + goto out; + } + + priv = ieee80211_priv(net_dev); + priv->ieee = netdev_priv(net_dev); + priv->net_dev = net_dev; + priv->pci_dev = pdev; +#ifdef CONFIG_IPW_DEBUG + ipw_debug_level = debug; +#endif + spin_lock_init(&priv->lock); + + if (pci_enable_device(pdev)) { + err = -ENODEV; + goto out_free_ieee80211; + } + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n"); + goto out_pci_disable_device; + } + + pci_set_drvdata(pdev, priv); + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto out_pci_disable_device; + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + length = pci_resource_len(pdev, 0); + priv->hw_len = length; + + base = ioremap_nocache(pci_resource_start(pdev, 0), length); + if (!base) { + err = -ENODEV; + goto out_pci_release_regions; + } + + priv->hw_base = base; + IPW_DEBUG_INFO("pci_resource_len = 0x%08x\n", length); + IPW_DEBUG_INFO("pci_resource_base = %p\n", base); + + err = ipw_setup_deferred_work(priv); + if (err) { + IPW_ERROR("Unable to setup deferred work\n"); + goto out_iounmap; + } + + /* Initialize module parameter values here */ + if (ifname) + strncpy(net_dev->name, ifname, IFNAMSIZ); + + if (associate) + priv->config |= CFG_ASSOCIATE; + else + IPW_DEBUG_INFO("Auto associate disabled.\n"); + + if (auto_create) + priv->config |= CFG_ADHOC_CREATE; + else + IPW_DEBUG_INFO("Auto adhoc creation disabled.\n"); + + if (disable) { + priv->status |= STATUS_RF_KILL_SW; + IPW_DEBUG_INFO("Radio disabled.\n"); + } + + if (channel != 0) { + priv->config |= CFG_STATIC_CHANNEL; + priv->channel = channel; + IPW_DEBUG_INFO("Bind to static channel %d\n", channel); + IPW_DEBUG_INFO("Bind to static channel %d\n", channel); + /* TODO: Validate that provided channel is in range */ + } + + switch (mode) { + case 1: + priv->ieee->iw_mode = IW_MODE_ADHOC; + break; +#ifdef CONFIG_IPW_PROMISC + case 2: + priv->ieee->iw_mode = IW_MODE_MONITOR; + break; +#endif + default: + case 0: + priv->ieee->iw_mode = IW_MODE_INFRA; + break; + } + + if ((priv->pci_dev->device == 0x4223) || + (priv->pci_dev->device == 0x4224)) { + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2915ABG Network " + "Connection\n"); + priv->ieee->abg_ture = 1; + band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND; + modulation = IEEE80211_OFDM_MODULATION | + IEEE80211_CCK_MODULATION; + priv->adapter = IPW_2915ABG; + priv->ieee->mode = IEEE_A | IEEE_G | IEEE_B; + } else { + if (priv->pci_dev->device == 0x4221) + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2225BG Network " + "Connection\n"); + else + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2200BG Network " + "Connection\n"); + + priv->ieee->abg_ture = 0; + band = IEEE80211_24GHZ_BAND; + modulation = IEEE80211_OFDM_MODULATION | + IEEE80211_CCK_MODULATION; + priv->adapter = IPW_2200BG; + priv->ieee->mode = IEEE_G | IEEE_B; + } + + priv->ieee->freq_band = band; + priv->ieee->modulation = modulation; + + priv->rates_mask = IEEE80211_DEFAULT_RATES_MASK; + + priv->missed_beacon_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT; + priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT; + + priv->rts_threshold = DEFAULT_RTS_THRESHOLD; + + /* If power management is turned on, default to AC mode */ + priv->power_mode = IPW_POWER_AC; + priv->tx_power = IPW_DEFAULT_TX_POWER; + + err = request_irq(pdev->irq, ipw_isr, SA_SHIRQ, DRV_NAME, priv); + if (err) { + IPW_ERROR("Error allocating IRQ %d\n", pdev->irq); + goto out_destroy_workqueue; + } + + SET_MODULE_OWNER(net_dev); + SET_NETDEV_DEV(net_dev, &pdev->dev); + + priv->ieee->hard_start_xmit = ipw_net_hard_start_xmit; + priv->ieee->set_security = shim__set_security; + + net_dev->open = ipw_net_open; + net_dev->stop = ipw_net_stop; + net_dev->init = ipw_net_init; + net_dev->get_stats = ipw_net_get_stats; + net_dev->set_multicast_list = ipw_net_set_multicast_list; + net_dev->set_mac_address = ipw_net_set_mac_address; + net_dev->get_wireless_stats = ipw_get_wireless_stats; + net_dev->wireless_handlers = &ipw_wx_handler_def; + net_dev->ethtool_ops = &ipw_ethtool_ops; + net_dev->irq = pdev->irq; + net_dev->base_addr = (unsigned long)priv->hw_base; + net_dev->mem_start = pci_resource_start(pdev, 0); + net_dev->mem_end = net_dev->mem_start + pci_resource_len(pdev, 0) - 1; + + err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group); + if (err) { + IPW_ERROR("failed to create sysfs device attributes\n"); + goto out_release_irq; + } + + err = register_netdev(net_dev); + if (err) { + IPW_ERROR("failed to register network device\n"); + goto out_remove_group; + } + + return 0; + + out_remove_group: + sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group); + out_release_irq: + free_irq(pdev->irq, priv); + out_destroy_workqueue: + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + out_iounmap: + iounmap(priv->hw_base); + out_pci_release_regions: + pci_release_regions(pdev); + out_pci_disable_device: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + out_free_ieee80211: + free_ieee80211(priv->net_dev); + out: + return err; +} + +static void ipw_pci_remove(struct pci_dev *pdev) +{ + struct ipw_priv *priv = pci_get_drvdata(pdev); + if (!priv) + return; + + priv->status |= STATUS_EXIT_PENDING; + + sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group); + + ipw_down(priv); + + unregister_netdev(priv->net_dev); + + if (priv->rxq) { + ipw_rx_queue_free(priv, priv->rxq); + priv->rxq = NULL; + } + ipw_tx_queue_free(priv); + + /* ipw_down will ensure that there is no more pending work + * in the workqueue's, so we can safely remove them now. */ + if (priv->workqueue) { + cancel_delayed_work(&priv->adhoc_check); + cancel_delayed_work(&priv->gather_stats); + cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->rf_kill); + cancel_delayed_work(&priv->scan_check); + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + } + + free_irq(pdev->irq, priv); + iounmap(priv->hw_base); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_ieee80211(priv->net_dev); + +#ifdef CONFIG_PM + if (fw_loaded) { + release_firmware(bootfw); + release_firmware(ucode); + release_firmware(firmware); + fw_loaded = 0; + } +#endif +} + +#ifdef CONFIG_PM +static int ipw_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ipw_priv *priv = pci_get_drvdata(pdev); + struct net_device *dev = priv->net_dev; + + printk(KERN_INFO "%s: Going into suspend...\n", dev->name); + + /* Take down the device; powers it off, etc. */ + ipw_down(priv); + + /* Remove the PRESENT state of the device */ + netif_device_detach(dev); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int ipw_pci_resume(struct pci_dev *pdev) +{ + struct ipw_priv *priv = pci_get_drvdata(pdev); + struct net_device *dev = priv->net_dev; + u32 val; + + printk(KERN_INFO "%s: Coming out of suspend...\n", dev->name); + + pci_set_power_state(pdev, 0); + pci_enable_device(pdev); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) + pci_restore_state(pdev, priv->pm_state); +#else + pci_restore_state(pdev); +#endif + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries + * from interfering with C3 CPU state. pci_restore_state won't help + * here since it only restores the first 64 bytes pci config header. + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + /* Set the device back into the PRESENT state; this will also wake + * the queue of needed */ + netif_device_attach(dev); + + /* Bring the device back up */ + queue_work(priv->workqueue, &priv->up); + + return 0; +} +#endif + +/* driver initialization stuff */ +static struct pci_driver ipw_driver = { + .name = DRV_NAME, + .id_table = card_ids, + .probe = ipw_pci_probe, + .remove = __devexit_p(ipw_pci_remove), +#ifdef CONFIG_PM + .suspend = ipw_pci_suspend, + .resume = ipw_pci_resume, +#endif +}; + +static int __init ipw_init(void) +{ + int ret; + + printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); + + ret = pci_module_init(&ipw_driver); + if (ret) { + IPW_ERROR("Unable to initialize PCI module\n"); + return ret; + } + + ret = driver_create_file(&ipw_driver.driver, &driver_attr_debug_level); + if (ret) { + IPW_ERROR("Unable to create driver sysfs file\n"); + pci_unregister_driver(&ipw_driver); + return ret; + } + + return ret; +} + +static void __exit ipw_exit(void) +{ + driver_remove_file(&ipw_driver.driver, &driver_attr_debug_level); + pci_unregister_driver(&ipw_driver); +} + +module_param(disable, int, 0444); +MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); + +module_param(associate, int, 0444); +MODULE_PARM_DESC(associate, "auto associate when scanning (default on)"); + +module_param(auto_create, int, 0444); +MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)"); + +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "debug output mask"); + +module_param(channel, int, 0444); +MODULE_PARM_DESC(channel, "channel to limit associate to (default 0 [ANY])"); + +module_param(ifname, charp, 0444); +MODULE_PARM_DESC(ifname, "network device name (default eth%d)"); + +#ifdef CONFIG_IPW_PROMISC +module_param(mode, int, 0444); +MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); +#else +module_param(mode, int, 0444); +MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS)"); +#endif + +module_exit(ipw_exit); +module_init(ipw_init); diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h new file mode 100644 index 00000000000..5b00882133f --- /dev/null +++ b/drivers/net/wireless/ipw2200.h @@ -0,0 +1,1680 @@ +/****************************************************************************** + + Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ + +#ifndef __ipw2200_h__ +#define __ipw2200_h__ + +#define WEXT_USECHANNELS 1 + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/config.h> +#include <linux/init.h> + +#include <linux/version.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/dma-mapping.h> + +#include <linux/firmware.h> +#include <linux/wireless.h> +#include <linux/dma-mapping.h> +#include <asm/io.h> + +#include <net/ieee80211.h> + +#define DRV_NAME "ipw2200" + +#include <linux/workqueue.h> + +/* Authentication and Association States */ +enum connection_manager_assoc_states { + CMAS_INIT = 0, + CMAS_TX_AUTH_SEQ_1, + CMAS_RX_AUTH_SEQ_2, + CMAS_AUTH_SEQ_1_PASS, + CMAS_AUTH_SEQ_1_FAIL, + CMAS_TX_AUTH_SEQ_3, + CMAS_RX_AUTH_SEQ_4, + CMAS_AUTH_SEQ_2_PASS, + CMAS_AUTH_SEQ_2_FAIL, + CMAS_AUTHENTICATED, + CMAS_TX_ASSOC, + CMAS_RX_ASSOC_RESP, + CMAS_ASSOCIATED, + CMAS_LAST +}; + +#define IPW_WAIT (1<<0) +#define IPW_QUIET (1<<1) +#define IPW_ROAMING (1<<2) + +#define IPW_POWER_MODE_CAM 0x00 //(always on) +#define IPW_POWER_INDEX_1 0x01 +#define IPW_POWER_INDEX_2 0x02 +#define IPW_POWER_INDEX_3 0x03 +#define IPW_POWER_INDEX_4 0x04 +#define IPW_POWER_INDEX_5 0x05 +#define IPW_POWER_AC 0x06 +#define IPW_POWER_BATTERY 0x07 +#define IPW_POWER_LIMIT 0x07 +#define IPW_POWER_MASK 0x0F +#define IPW_POWER_ENABLED 0x10 +#define IPW_POWER_LEVEL(x) ((x) & IPW_POWER_MASK) + +#define IPW_CMD_HOST_COMPLETE 2 +#define IPW_CMD_POWER_DOWN 4 +#define IPW_CMD_SYSTEM_CONFIG 6 +#define IPW_CMD_MULTICAST_ADDRESS 7 +#define IPW_CMD_SSID 8 +#define IPW_CMD_ADAPTER_ADDRESS 11 +#define IPW_CMD_PORT_TYPE 12 +#define IPW_CMD_RTS_THRESHOLD 15 +#define IPW_CMD_FRAG_THRESHOLD 16 +#define IPW_CMD_POWER_MODE 17 +#define IPW_CMD_WEP_KEY 18 +#define IPW_CMD_TGI_TX_KEY 19 +#define IPW_CMD_SCAN_REQUEST 20 +#define IPW_CMD_ASSOCIATE 21 +#define IPW_CMD_SUPPORTED_RATES 22 +#define IPW_CMD_SCAN_ABORT 23 +#define IPW_CMD_TX_FLUSH 24 +#define IPW_CMD_QOS_PARAMETERS 25 +#define IPW_CMD_SCAN_REQUEST_EXT 26 +#define IPW_CMD_DINO_CONFIG 30 +#define IPW_CMD_RSN_CAPABILITIES 31 +#define IPW_CMD_RX_KEY 32 +#define IPW_CMD_CARD_DISABLE 33 +#define IPW_CMD_SEED_NUMBER 34 +#define IPW_CMD_TX_POWER 35 +#define IPW_CMD_COUNTRY_INFO 36 +#define IPW_CMD_AIRONET_INFO 37 +#define IPW_CMD_AP_TX_POWER 38 +#define IPW_CMD_CCKM_INFO 39 +#define IPW_CMD_CCX_VER_INFO 40 +#define IPW_CMD_SET_CALIBRATION 41 +#define IPW_CMD_SENSITIVITY_CALIB 42 +#define IPW_CMD_RETRY_LIMIT 51 +#define IPW_CMD_IPW_PRE_POWER_DOWN 58 +#define IPW_CMD_VAP_BEACON_TEMPLATE 60 +#define IPW_CMD_VAP_DTIM_PERIOD 61 +#define IPW_CMD_EXT_SUPPORTED_RATES 62 +#define IPW_CMD_VAP_LOCAL_TX_PWR_CONSTRAINT 63 +#define IPW_CMD_VAP_QUIET_INTERVALS 64 +#define IPW_CMD_VAP_CHANNEL_SWITCH 65 +#define IPW_CMD_VAP_MANDATORY_CHANNELS 66 +#define IPW_CMD_VAP_CELL_PWR_LIMIT 67 +#define IPW_CMD_VAP_CF_PARAM_SET 68 +#define IPW_CMD_VAP_SET_BEACONING_STATE 69 +#define IPW_CMD_MEASUREMENT 80 +#define IPW_CMD_POWER_CAPABILITY 81 +#define IPW_CMD_SUPPORTED_CHANNELS 82 +#define IPW_CMD_TPC_REPORT 83 +#define IPW_CMD_WME_INFO 84 +#define IPW_CMD_PRODUCTION_COMMAND 85 +#define IPW_CMD_LINKSYS_EOU_INFO 90 + +#define RFD_SIZE 4 +#define NUM_TFD_CHUNKS 6 + +#define TX_QUEUE_SIZE 32 +#define RX_QUEUE_SIZE 32 + +#define DINO_CMD_WEP_KEY 0x08 +#define DINO_CMD_TX 0x0B +#define DCT_ANTENNA_A 0x01 +#define DCT_ANTENNA_B 0x02 + +#define IPW_A_MODE 0 +#define IPW_B_MODE 1 +#define IPW_G_MODE 2 + +/* + * TX Queue Flag Definitions + */ + +/* abort attempt if mgmt frame is rx'd */ +#define DCT_FLAG_ABORT_MGMT 0x01 + +/* require CTS */ +#define DCT_FLAG_CTS_REQUIRED 0x02 + +/* use short preamble */ +#define DCT_FLAG_SHORT_PREMBL 0x04 + +/* RTS/CTS first */ +#define DCT_FLAG_RTS_REQD 0x08 + +/* dont calculate duration field */ +#define DCT_FLAG_DUR_SET 0x10 + +/* even if MAC WEP set (allows pre-encrypt) */ +#define DCT_FLAG_NO_WEP 0x20 + +/* overwrite TSF field */ +#define DCT_FLAG_TSF_REQD 0x40 + +/* ACK rx is expected to follow */ +#define DCT_FLAG_ACK_REQD 0x80 + +#define DCT_FLAG_EXT_MODE_CCK 0x01 +#define DCT_FLAG_EXT_MODE_OFDM 0x00 + +#define TX_RX_TYPE_MASK 0xFF +#define TX_FRAME_TYPE 0x00 +#define TX_HOST_COMMAND_TYPE 0x01 +#define RX_FRAME_TYPE 0x09 +#define RX_HOST_NOTIFICATION_TYPE 0x03 +#define RX_HOST_CMD_RESPONSE_TYPE 0x04 +#define RX_TX_FRAME_RESPONSE_TYPE 0x05 +#define TFD_NEED_IRQ_MASK 0x04 + +#define HOST_CMD_DINO_CONFIG 30 + +#define HOST_NOTIFICATION_STATUS_ASSOCIATED 10 +#define HOST_NOTIFICATION_STATUS_AUTHENTICATE 11 +#define HOST_NOTIFICATION_STATUS_SCAN_CHANNEL_RESULT 12 +#define HOST_NOTIFICATION_STATUS_SCAN_COMPLETED 13 +#define HOST_NOTIFICATION_STATUS_FRAG_LENGTH 14 +#define HOST_NOTIFICATION_STATUS_LINK_DETERIORATION 15 +#define HOST_NOTIFICATION_DINO_CONFIG_RESPONSE 16 +#define HOST_NOTIFICATION_STATUS_BEACON_STATE 17 +#define HOST_NOTIFICATION_STATUS_TGI_TX_KEY 18 +#define HOST_NOTIFICATION_TX_STATUS 19 +#define HOST_NOTIFICATION_CALIB_KEEP_RESULTS 20 +#define HOST_NOTIFICATION_MEASUREMENT_STARTED 21 +#define HOST_NOTIFICATION_MEASUREMENT_ENDED 22 +#define HOST_NOTIFICATION_CHANNEL_SWITCHED 23 +#define HOST_NOTIFICATION_RX_DURING_QUIET_PERIOD 24 +#define HOST_NOTIFICATION_NOISE_STATS 25 +#define HOST_NOTIFICATION_S36_MEASUREMENT_ACCEPTED 30 +#define HOST_NOTIFICATION_S36_MEASUREMENT_REFUSED 31 + +#define HOST_NOTIFICATION_STATUS_BEACON_MISSING 1 +#define IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT 24 +#define IPW_MB_ROAMING_THRESHOLD_DEFAULT 8 +#define IPW_REAL_RATE_RX_PACKET_THRESHOLD 300 + +#define MACADRR_BYTE_LEN 6 + +#define DCR_TYPE_AP 0x01 +#define DCR_TYPE_WLAP 0x02 +#define DCR_TYPE_MU_ESS 0x03 +#define DCR_TYPE_MU_IBSS 0x04 +#define DCR_TYPE_MU_PIBSS 0x05 +#define DCR_TYPE_SNIFFER 0x06 +#define DCR_TYPE_MU_BSS DCR_TYPE_MU_ESS + +/** + * Generic queue structure + * + * Contains common data for Rx and Tx queues + */ +struct clx2_queue { + int n_bd; /**< number of BDs in this queue */ + int first_empty; /**< 1-st empty entry (index) */ + int last_used; /**< last used entry (index) */ + u32 reg_w; /**< 'write' reg (queue head), addr in domain 1 */ + u32 reg_r; /**< 'read' reg (queue tail), addr in domain 1 */ + dma_addr_t dma_addr; /**< physical addr for BD's */ + int low_mark; /**< low watermark, resume queue if free space more than this */ + int high_mark; /**< high watermark, stop queue if free space less than this */ +} __attribute__ ((packed)); + +struct machdr32 { + u16 frame_ctl; + u16 duration; // watch out for endians! + u8 addr1[MACADRR_BYTE_LEN]; + u8 addr2[MACADRR_BYTE_LEN]; + u8 addr3[MACADRR_BYTE_LEN]; + u16 seq_ctrl; // more endians! + u8 addr4[MACADRR_BYTE_LEN]; + u16 qos_ctrl; +} __attribute__ ((packed)); + +struct machdr30 { + u16 frame_ctl; + u16 duration; // watch out for endians! + u8 addr1[MACADRR_BYTE_LEN]; + u8 addr2[MACADRR_BYTE_LEN]; + u8 addr3[MACADRR_BYTE_LEN]; + u16 seq_ctrl; // more endians! + u8 addr4[MACADRR_BYTE_LEN]; +} __attribute__ ((packed)); + +struct machdr26 { + u16 frame_ctl; + u16 duration; // watch out for endians! + u8 addr1[MACADRR_BYTE_LEN]; + u8 addr2[MACADRR_BYTE_LEN]; + u8 addr3[MACADRR_BYTE_LEN]; + u16 seq_ctrl; // more endians! + u16 qos_ctrl; +} __attribute__ ((packed)); + +struct machdr24 { + u16 frame_ctl; + u16 duration; // watch out for endians! + u8 addr1[MACADRR_BYTE_LEN]; + u8 addr2[MACADRR_BYTE_LEN]; + u8 addr3[MACADRR_BYTE_LEN]; + u16 seq_ctrl; // more endians! +} __attribute__ ((packed)); + +// TX TFD with 32 byte MAC Header +struct tx_tfd_32 { + struct machdr32 mchdr; // 32 + u32 uivplaceholder[2]; // 8 +} __attribute__ ((packed)); + +// TX TFD with 30 byte MAC Header +struct tx_tfd_30 { + struct machdr30 mchdr; // 30 + u8 reserved[2]; // 2 + u32 uivplaceholder[2]; // 8 +} __attribute__ ((packed)); + +// tx tfd with 26 byte mac header +struct tx_tfd_26 { + struct machdr26 mchdr; // 26 + u8 reserved1[2]; // 2 + u32 uivplaceholder[2]; // 8 + u8 reserved2[4]; // 4 +} __attribute__ ((packed)); + +// tx tfd with 24 byte mac header +struct tx_tfd_24 { + struct machdr24 mchdr; // 24 + u32 uivplaceholder[2]; // 8 + u8 reserved[8]; // 8 +} __attribute__ ((packed)); + +#define DCT_WEP_KEY_FIELD_LENGTH 16 + +struct tfd_command { + u8 index; + u8 length; + u16 reserved; + u8 payload[0]; +} __attribute__ ((packed)); + +struct tfd_data { + /* Header */ + u32 work_area_ptr; + u8 station_number; /* 0 for BSS */ + u8 reserved1; + u16 reserved2; + + /* Tx Parameters */ + u8 cmd_id; + u8 seq_num; + u16 len; + u8 priority; + u8 tx_flags; + u8 tx_flags_ext; + u8 key_index; + u8 wepkey[DCT_WEP_KEY_FIELD_LENGTH]; + u8 rate; + u8 antenna; + u16 next_packet_duration; + u16 next_frag_len; + u16 back_off_counter; //////txop; + u8 retrylimit; + u16 cwcurrent; + u8 reserved3; + + /* 802.11 MAC Header */ + union { + struct tx_tfd_24 tfd_24; + struct tx_tfd_26 tfd_26; + struct tx_tfd_30 tfd_30; + struct tx_tfd_32 tfd_32; + } tfd; + + /* Payload DMA info */ + u32 num_chunks; + u32 chunk_ptr[NUM_TFD_CHUNKS]; + u16 chunk_len[NUM_TFD_CHUNKS]; +} __attribute__ ((packed)); + +struct txrx_control_flags { + u8 message_type; + u8 rx_seq_num; + u8 control_bits; + u8 reserved; +} __attribute__ ((packed)); + +#define TFD_SIZE 128 +#define TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH (TFD_SIZE - sizeof(struct txrx_control_flags)) + +struct tfd_frame { + struct txrx_control_flags control_flags; + union { + struct tfd_data data; + struct tfd_command cmd; + u8 raw[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH]; + } u; +} __attribute__ ((packed)); + +typedef void destructor_func(const void *); + +/** + * Tx Queue for DMA. Queue consists of circular buffer of + * BD's and required locking structures. + */ +struct clx2_tx_queue { + struct clx2_queue q; + struct tfd_frame *bd; + struct ieee80211_txb **txb; +}; + +/* + * RX related structures and functions + */ +#define RX_FREE_BUFFERS 32 +#define RX_LOW_WATERMARK 8 + +#define SUP_RATE_11A_MAX_NUM_CHANNELS (8) +#define SUP_RATE_11B_MAX_NUM_CHANNELS (4) +#define SUP_RATE_11G_MAX_NUM_CHANNELS (12) + +// Used for passing to driver number of successes and failures per rate +struct rate_histogram { + union { + u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } success; + union { + u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } failed; +} __attribute__ ((packed)); + +/* statistics command response */ +struct ipw_cmd_stats { + u8 cmd_id; + u8 seq_num; + u16 good_sfd; + u16 bad_plcp; + u16 wrong_bssid; + u16 valid_mpdu; + u16 bad_mac_header; + u16 reserved_frame_types; + u16 rx_ina; + u16 bad_crc32; + u16 invalid_cts; + u16 invalid_acks; + u16 long_distance_ina_fina; + u16 dsp_silence_unreachable; + u16 accumulated_rssi; + u16 rx_ovfl_frame_tossed; + u16 rssi_silence_threshold; + u16 rx_ovfl_frame_supplied; + u16 last_rx_frame_signal; + u16 last_rx_frame_noise; + u16 rx_autodetec_no_ofdm; + u16 rx_autodetec_no_barker; + u16 reserved; +} __attribute__ ((packed)); + +struct notif_channel_result { + u8 channel_num; + struct ipw_cmd_stats stats; + u8 uReserved; +} __attribute__ ((packed)); + +struct notif_scan_complete { + u8 scan_type; + u8 num_channels; + u8 status; + u8 reserved; +} __attribute__ ((packed)); + +struct notif_frag_length { + u16 frag_length; + u16 reserved; +} __attribute__ ((packed)); + +struct notif_beacon_state { + u32 state; + u32 number; +} __attribute__ ((packed)); + +struct notif_tgi_tx_key { + u8 key_state; + u8 security_type; + u8 station_index; + u8 reserved; +} __attribute__ ((packed)); + +struct notif_link_deterioration { + struct ipw_cmd_stats stats; + u8 rate; + u8 modulation; + struct rate_histogram histogram; + u8 reserved1; + u16 reserved2; +} __attribute__ ((packed)); + +struct notif_association { + u8 state; +} __attribute__ ((packed)); + +struct notif_authenticate { + u8 state; + struct machdr24 addr; + u16 status; +} __attribute__ ((packed)); + +struct notif_calibration { + u8 data[104]; +} __attribute__ ((packed)); + +struct notif_noise { + u32 value; +} __attribute__ ((packed)); + +struct ipw_rx_notification { + u8 reserved[8]; + u8 subtype; + u8 flags; + u16 size; + union { + struct notif_association assoc; + struct notif_authenticate auth; + struct notif_channel_result channel_result; + struct notif_scan_complete scan_complete; + struct notif_frag_length frag_len; + struct notif_beacon_state beacon_state; + struct notif_tgi_tx_key tgi_tx_key; + struct notif_link_deterioration link_deterioration; + struct notif_calibration calibration; + struct notif_noise noise; + u8 raw[0]; + } u; +} __attribute__ ((packed)); + +struct ipw_rx_frame { + u32 reserved1; + u8 parent_tsf[4]; // fw_use[0] is boolean for OUR_TSF_IS_GREATER + u8 received_channel; // The channel that this frame was received on. + // Note that for .11b this does not have to be + // the same as the channel that it was sent. + // Filled by LMAC + u8 frameStatus; + u8 rate; + u8 rssi; + u8 agc; + u8 rssi_dbm; + u16 signal; + u16 noise; + u8 antennaAndPhy; + u8 control; // control bit should be on in bg + u8 rtscts_rate; // rate of rts or cts (in rts cts sequence rate + // is identical) + u8 rtscts_seen; // 0x1 RTS seen ; 0x2 CTS seen + u16 length; + u8 data[0]; +} __attribute__ ((packed)); + +struct ipw_rx_header { + u8 message_type; + u8 rx_seq_num; + u8 control_bits; + u8 reserved; +} __attribute__ ((packed)); + +struct ipw_rx_packet { + struct ipw_rx_header header; + union { + struct ipw_rx_frame frame; + struct ipw_rx_notification notification; + } u; +} __attribute__ ((packed)); + +#define IPW_RX_NOTIFICATION_SIZE sizeof(struct ipw_rx_header) + 12 +#define IPW_RX_FRAME_SIZE sizeof(struct ipw_rx_header) + \ + sizeof(struct ipw_rx_frame) + +struct ipw_rx_mem_buffer { + dma_addr_t dma_addr; + struct ipw_rx_buffer *rxb; + struct sk_buff *skb; + struct list_head list; +}; /* Not transferred over network, so not __attribute__ ((packed)) */ + +struct ipw_rx_queue { + struct ipw_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; + struct ipw_rx_mem_buffer *queue[RX_QUEUE_SIZE]; + u32 processed; /* Internal index to last handled Rx packet */ + u32 read; /* Shared index to newest available Rx buffer */ + u32 write; /* Shared index to oldest written Rx packet */ + u32 free_count; /* Number of pre-allocated buffers in rx_free */ + /* Each of these lists is used as a FIFO for ipw_rx_mem_buffers */ + struct list_head rx_free; /* Own an SKBs */ + struct list_head rx_used; /* No SKB allocated */ + spinlock_t lock; +}; /* Not transferred over network, so not __attribute__ ((packed)) */ + +struct alive_command_responce { + u8 alive_command; + u8 sequence_number; + u16 software_revision; + u8 device_identifier; + u8 reserved1[5]; + u16 reserved2; + u16 reserved3; + u16 clock_settle_time; + u16 powerup_settle_time; + u16 reserved4; + u8 time_stamp[5]; /* month, day, year, hours, minutes */ + u8 ucode_valid; +} __attribute__ ((packed)); + +#define IPW_MAX_RATES 12 + +struct ipw_rates { + u8 num_rates; + u8 rates[IPW_MAX_RATES]; +} __attribute__ ((packed)); + +struct command_block { + unsigned int control; + u32 source_addr; + u32 dest_addr; + unsigned int status; +} __attribute__ ((packed)); + +#define CB_NUMBER_OF_ELEMENTS_SMALL 64 +struct fw_image_desc { + unsigned long last_cb_index; + unsigned long current_cb_index; + struct command_block cb_list[CB_NUMBER_OF_ELEMENTS_SMALL]; + void *v_addr; + unsigned long p_addr; + unsigned long len; +}; + +struct ipw_sys_config { + u8 bt_coexistence; + u8 reserved1; + u8 answer_broadcast_ssid_probe; + u8 accept_all_data_frames; + u8 accept_non_directed_frames; + u8 exclude_unicast_unencrypted; + u8 disable_unicast_decryption; + u8 exclude_multicast_unencrypted; + u8 disable_multicast_decryption; + u8 antenna_diversity; + u8 pass_crc_to_host; + u8 dot11g_auto_detection; + u8 enable_cts_to_self; + u8 enable_multicast_filtering; + u8 bt_coexist_collision_thr; + u8 reserved2; + u8 accept_all_mgmt_bcpr; + u8 accept_all_mgtm_frames; + u8 pass_noise_stats_to_host; + u8 reserved3; +} __attribute__ ((packed)); + +struct ipw_multicast_addr { + u8 num_of_multicast_addresses; + u8 reserved[3]; + u8 mac1[6]; + u8 mac2[6]; + u8 mac3[6]; + u8 mac4[6]; +} __attribute__ ((packed)); + +struct ipw_wep_key { + u8 cmd_id; + u8 seq_num; + u8 key_index; + u8 key_size; + u8 key[16]; +} __attribute__ ((packed)); + +struct ipw_tgi_tx_key { + u8 key_id; + u8 security_type; + u8 station_index; + u8 flags; + u8 key[16]; + u32 tx_counter[2]; +} __attribute__ ((packed)); + +#define IPW_SCAN_CHANNELS 54 + +struct ipw_scan_request { + u8 scan_type; + u16 dwell_time; + u8 channels_list[IPW_SCAN_CHANNELS]; + u8 channels_reserved[3]; +} __attribute__ ((packed)); + +enum { + IPW_SCAN_PASSIVE_TILL_FIRST_BEACON_SCAN = 0, + IPW_SCAN_PASSIVE_FULL_DWELL_SCAN, + IPW_SCAN_ACTIVE_DIRECT_SCAN, + IPW_SCAN_ACTIVE_BROADCAST_SCAN, + IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN, + IPW_SCAN_TYPES +}; + +struct ipw_scan_request_ext { + u32 full_scan_index; + u8 channels_list[IPW_SCAN_CHANNELS]; + u8 scan_type[IPW_SCAN_CHANNELS / 2]; + u8 reserved; + u16 dwell_time[IPW_SCAN_TYPES]; +} __attribute__ ((packed)); + +extern inline u8 ipw_get_scan_type(struct ipw_scan_request_ext *scan, u8 index) +{ + if (index % 2) + return scan->scan_type[index / 2] & 0x0F; + else + return (scan->scan_type[index / 2] & 0xF0) >> 4; +} + +extern inline void ipw_set_scan_type(struct ipw_scan_request_ext *scan, + u8 index, u8 scan_type) +{ + if (index % 2) + scan->scan_type[index / 2] = + (scan->scan_type[index / 2] & 0xF0) | (scan_type & 0x0F); + else + scan->scan_type[index / 2] = + (scan->scan_type[index / 2] & 0x0F) | + ((scan_type & 0x0F) << 4); +} + +struct ipw_associate { + u8 channel; + u8 auth_type:4, auth_key:4; + u8 assoc_type; + u8 reserved; + u16 policy_support; + u8 preamble_length; + u8 ieee_mode; + u8 bssid[ETH_ALEN]; + u32 assoc_tsf_msw; + u32 assoc_tsf_lsw; + u16 capability; + u16 listen_interval; + u16 beacon_interval; + u8 dest[ETH_ALEN]; + u16 atim_window; + u8 smr; + u8 reserved1; + u16 reserved2; +} __attribute__ ((packed)); + +struct ipw_supported_rates { + u8 ieee_mode; + u8 num_rates; + u8 purpose; + u8 reserved; + u8 supported_rates[IPW_MAX_RATES]; +} __attribute__ ((packed)); + +struct ipw_rts_threshold { + u16 rts_threshold; + u16 reserved; +} __attribute__ ((packed)); + +struct ipw_frag_threshold { + u16 frag_threshold; + u16 reserved; +} __attribute__ ((packed)); + +struct ipw_retry_limit { + u8 short_retry_limit; + u8 long_retry_limit; + u16 reserved; +} __attribute__ ((packed)); + +struct ipw_dino_config { + u32 dino_config_addr; + u16 dino_config_size; + u8 dino_response; + u8 reserved; +} __attribute__ ((packed)); + +struct ipw_aironet_info { + u8 id; + u8 length; + u16 reserved; +} __attribute__ ((packed)); + +struct ipw_rx_key { + u8 station_index; + u8 key_type; + u8 key_id; + u8 key_flag; + u8 key[16]; + u8 station_address[6]; + u8 key_index; + u8 reserved; +} __attribute__ ((packed)); + +struct ipw_country_channel_info { + u8 first_channel; + u8 no_channels; + s8 max_tx_power; +} __attribute__ ((packed)); + +struct ipw_country_info { + u8 id; + u8 length; + u8 country_str[3]; + struct ipw_country_channel_info groups[7]; +} __attribute__ ((packed)); + +struct ipw_channel_tx_power { + u8 channel_number; + s8 tx_power; +} __attribute__ ((packed)); + +#define SCAN_ASSOCIATED_INTERVAL (HZ) +#define SCAN_INTERVAL (HZ / 10) +#define MAX_A_CHANNELS 37 +#define MAX_B_CHANNELS 14 + +struct ipw_tx_power { + u8 num_channels; + u8 ieee_mode; + struct ipw_channel_tx_power channels_tx_power[MAX_A_CHANNELS]; +} __attribute__ ((packed)); + +struct ipw_qos_parameters { + u16 cw_min[4]; + u16 cw_max[4]; + u8 aifs[4]; + u8 flag[4]; + u16 tx_op_limit[4]; +} __attribute__ ((packed)); + +struct ipw_rsn_capabilities { + u8 id; + u8 length; + u16 version; +} __attribute__ ((packed)); + +struct ipw_sensitivity_calib { + u16 beacon_rssi_raw; + u16 reserved; +} __attribute__ ((packed)); + +/** + * Host command structure. + * + * On input, the following fields should be filled: + * - cmd + * - len + * - status_len + * - param (if needed) + * + * On output, + * - \a status contains status; + * - \a param filled with status parameters. + */ +struct ipw_cmd { + u32 cmd; /**< Host command */ + u32 status;/**< Status */ + u32 status_len; + /**< How many 32 bit parameters in the status */ + u32 len; /**< incoming parameters length, bytes */ + /** + * command parameters. + * There should be enough space for incoming and + * outcoming parameters. + * Incoming parameters listed 1-st, followed by outcoming params. + * nParams=(len+3)/4+status_len + */ + u32 param[0]; +} __attribute__ ((packed)); + +#define STATUS_HCMD_ACTIVE (1<<0) /**< host command in progress */ + +#define STATUS_INT_ENABLED (1<<1) +#define STATUS_RF_KILL_HW (1<<2) +#define STATUS_RF_KILL_SW (1<<3) +#define STATUS_RF_KILL_MASK (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW) + +#define STATUS_INIT (1<<5) +#define STATUS_AUTH (1<<6) +#define STATUS_ASSOCIATED (1<<7) +#define STATUS_STATE_MASK (STATUS_INIT | STATUS_AUTH | STATUS_ASSOCIATED) + +#define STATUS_ASSOCIATING (1<<8) +#define STATUS_DISASSOCIATING (1<<9) +#define STATUS_ROAMING (1<<10) +#define STATUS_EXIT_PENDING (1<<11) +#define STATUS_DISASSOC_PENDING (1<<12) +#define STATUS_STATE_PENDING (1<<13) + +#define STATUS_SCAN_PENDING (1<<20) +#define STATUS_SCANNING (1<<21) +#define STATUS_SCAN_ABORTING (1<<22) + +#define STATUS_INDIRECT_BYTE (1<<28) /* sysfs entry configured for access */ +#define STATUS_INDIRECT_DWORD (1<<29) /* sysfs entry configured for access */ +#define STATUS_DIRECT_DWORD (1<<30) /* sysfs entry configured for access */ + +#define STATUS_SECURITY_UPDATED (1<<31) /* Security sync needed */ + +#define CFG_STATIC_CHANNEL (1<<0) /* Restrict assoc. to single channel */ +#define CFG_STATIC_ESSID (1<<1) /* Restrict assoc. to single SSID */ +#define CFG_STATIC_BSSID (1<<2) /* Restrict assoc. to single BSSID */ +#define CFG_CUSTOM_MAC (1<<3) +#define CFG_PREAMBLE (1<<4) +#define CFG_ADHOC_PERSIST (1<<5) +#define CFG_ASSOCIATE (1<<6) +#define CFG_FIXED_RATE (1<<7) +#define CFG_ADHOC_CREATE (1<<8) + +#define CAP_SHARED_KEY (1<<0) /* Off = OPEN */ +#define CAP_PRIVACY_ON (1<<1) /* Off = No privacy */ + +#define MAX_STATIONS 32 +#define IPW_INVALID_STATION (0xff) + +struct ipw_station_entry { + u8 mac_addr[ETH_ALEN]; + u8 reserved; + u8 support_mode; +}; + +#define AVG_ENTRIES 8 +struct average { + s16 entries[AVG_ENTRIES]; + u8 pos; + u8 init; + s32 sum; +}; + +struct ipw_priv { + /* ieee device used by generic ieee processing code */ + struct ieee80211_device *ieee; + struct ieee80211_security sec; + + /* spinlock */ + spinlock_t lock; + + /* basic pci-network driver stuff */ + struct pci_dev *pci_dev; + struct net_device *net_dev; + + /* pci hardware address support */ + void __iomem *hw_base; + unsigned long hw_len; + + struct fw_image_desc sram_desc; + + /* result of ucode download */ + struct alive_command_responce dino_alive; + + wait_queue_head_t wait_command_queue; + wait_queue_head_t wait_state; + + /* Rx and Tx DMA processing queues */ + struct ipw_rx_queue *rxq; + struct clx2_tx_queue txq_cmd; + struct clx2_tx_queue txq[4]; + u32 status; + u32 config; + u32 capability; + + u8 last_rx_rssi; + u8 last_noise; + struct average average_missed_beacons; + struct average average_rssi; + struct average average_noise; + u32 port_type; + int rx_bufs_min; /**< minimum number of bufs in Rx queue */ + int rx_pend_max; /**< maximum pending buffers for one IRQ */ + u32 hcmd_seq; /**< sequence number for hcmd */ + u32 missed_beacon_threshold; + u32 roaming_threshold; + + struct ipw_associate assoc_request; + struct ieee80211_network *assoc_network; + + unsigned long ts_scan_abort; + struct ipw_supported_rates rates; + struct ipw_rates phy[3]; /**< PHY restrictions, per band */ + struct ipw_rates supp; /**< software defined */ + struct ipw_rates extended; /**< use for corresp. IE, AP only */ + + struct notif_link_deterioration last_link_deterioration; /** for statistics */ + struct ipw_cmd *hcmd; /**< host command currently executed */ + + wait_queue_head_t hcmd_wq; /**< host command waits for execution */ + u32 tsf_bcn[2]; /**< TSF from latest beacon */ + + struct notif_calibration calib; /**< last calibration */ + + /* ordinal interface with firmware */ + u32 table0_addr; + u32 table0_len; + u32 table1_addr; + u32 table1_len; + u32 table2_addr; + u32 table2_len; + + /* context information */ + u8 essid[IW_ESSID_MAX_SIZE]; + u8 essid_len; + u8 nick[IW_ESSID_MAX_SIZE]; + u16 rates_mask; + u8 channel; + struct ipw_sys_config sys_config; + u32 power_mode; + u8 bssid[ETH_ALEN]; + u16 rts_threshold; + u8 mac_addr[ETH_ALEN]; + u8 num_stations; + u8 stations[MAX_STATIONS][ETH_ALEN]; + + u32 notif_missed_beacons; + + /* Statistics and counters normalized with each association */ + u32 last_missed_beacons; + u32 last_tx_packets; + u32 last_rx_packets; + u32 last_tx_failures; + u32 last_rx_err; + u32 last_rate; + + u32 missed_adhoc_beacons; + u32 missed_beacons; + u32 rx_packets; + u32 tx_packets; + u32 quality; + + /* eeprom */ + u8 eeprom[0x100]; /* 256 bytes of eeprom */ + int eeprom_delay; + + struct iw_statistics wstats; + + struct workqueue_struct *workqueue; + + struct work_struct adhoc_check; + struct work_struct associate; + struct work_struct disassociate; + struct work_struct rx_replenish; + struct work_struct request_scan; + struct work_struct adapter_restart; + struct work_struct rf_kill; + struct work_struct up; + struct work_struct down; + struct work_struct gather_stats; + struct work_struct abort_scan; + struct work_struct roam; + struct work_struct scan_check; + + struct tasklet_struct irq_tasklet; + +#define IPW_2200BG 1 +#define IPW_2915ABG 2 + u8 adapter; + +#define IPW_DEFAULT_TX_POWER 0x14 + u8 tx_power; + +#ifdef CONFIG_PM + u32 pm_state[16]; +#endif + + /* network state */ + + /* Used to pass the current INTA value from ISR to Tasklet */ + u32 isr_inta; + + /* debugging info */ + u32 indirect_dword; + u32 direct_dword; + u32 indirect_byte; +}; /*ipw_priv */ + +/* debug macros */ + +#ifdef CONFIG_IPW_DEBUG +#define IPW_DEBUG(level, fmt, args...) \ +do { if (ipw_debug_level & (level)) \ + printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) +#else +#define IPW_DEBUG(level, fmt, args...) do {} while (0) +#endif /* CONFIG_IPW_DEBUG */ + +/* + * To use the debug system; + * + * If you are defining a new debug classification, simply add it to the #define + * list here in the form of: + * + * #define IPW_DL_xxxx VALUE + * + * shifting value to the left one bit from the previous entry. xxxx should be + * the name of the classification (for example, WEP) + * + * You then need to either add a IPW_xxxx_DEBUG() macro definition for your + * classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want + * to send output to that classification. + * + * To add your debug level to the list of levels seen when you perform + * + * % cat /proc/net/ipw/debug_level + * + * you simply need to add your entry to the ipw_debug_levels array. + * + * If you do not see debug_level in /proc/net/ipw then you do not have + * CONFIG_IPW_DEBUG defined in your kernel configuration + * + */ + +#define IPW_DL_ERROR (1<<0) +#define IPW_DL_WARNING (1<<1) +#define IPW_DL_INFO (1<<2) +#define IPW_DL_WX (1<<3) +#define IPW_DL_HOST_COMMAND (1<<5) +#define IPW_DL_STATE (1<<6) + +#define IPW_DL_NOTIF (1<<10) +#define IPW_DL_SCAN (1<<11) +#define IPW_DL_ASSOC (1<<12) +#define IPW_DL_DROP (1<<13) +#define IPW_DL_IOCTL (1<<14) + +#define IPW_DL_MANAGE (1<<15) +#define IPW_DL_FW (1<<16) +#define IPW_DL_RF_KILL (1<<17) +#define IPW_DL_FW_ERRORS (1<<18) + +#define IPW_DL_ORD (1<<20) + +#define IPW_DL_FRAG (1<<21) +#define IPW_DL_WEP (1<<22) +#define IPW_DL_TX (1<<23) +#define IPW_DL_RX (1<<24) +#define IPW_DL_ISR (1<<25) +#define IPW_DL_FW_INFO (1<<26) +#define IPW_DL_IO (1<<27) +#define IPW_DL_TRACE (1<<28) + +#define IPW_DL_STATS (1<<29) + +#define IPW_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a) +#define IPW_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a) +#define IPW_DEBUG_INFO(f, a...) IPW_DEBUG(IPW_DL_INFO, f, ## a) + +#define IPW_DEBUG_WX(f, a...) IPW_DEBUG(IPW_DL_WX, f, ## a) +#define IPW_DEBUG_SCAN(f, a...) IPW_DEBUG(IPW_DL_SCAN, f, ## a) +#define IPW_DEBUG_STATUS(f, a...) IPW_DEBUG(IPW_DL_STATUS, f, ## a) +#define IPW_DEBUG_TRACE(f, a...) IPW_DEBUG(IPW_DL_TRACE, f, ## a) +#define IPW_DEBUG_RX(f, a...) IPW_DEBUG(IPW_DL_RX, f, ## a) +#define IPW_DEBUG_TX(f, a...) IPW_DEBUG(IPW_DL_TX, f, ## a) +#define IPW_DEBUG_ISR(f, a...) IPW_DEBUG(IPW_DL_ISR, f, ## a) +#define IPW_DEBUG_MANAGEMENT(f, a...) IPW_DEBUG(IPW_DL_MANAGE, f, ## a) +#define IPW_DEBUG_WEP(f, a...) IPW_DEBUG(IPW_DL_WEP, f, ## a) +#define IPW_DEBUG_HC(f, a...) IPW_DEBUG(IPW_DL_HOST_COMMAND, f, ## a) +#define IPW_DEBUG_FRAG(f, a...) IPW_DEBUG(IPW_DL_FRAG, f, ## a) +#define IPW_DEBUG_FW(f, a...) IPW_DEBUG(IPW_DL_FW, f, ## a) +#define IPW_DEBUG_RF_KILL(f, a...) IPW_DEBUG(IPW_DL_RF_KILL, f, ## a) +#define IPW_DEBUG_DROP(f, a...) IPW_DEBUG(IPW_DL_DROP, f, ## a) +#define IPW_DEBUG_IO(f, a...) IPW_DEBUG(IPW_DL_IO, f, ## a) +#define IPW_DEBUG_ORD(f, a...) IPW_DEBUG(IPW_DL_ORD, f, ## a) +#define IPW_DEBUG_FW_INFO(f, a...) IPW_DEBUG(IPW_DL_FW_INFO, f, ## a) +#define IPW_DEBUG_NOTIF(f, a...) IPW_DEBUG(IPW_DL_NOTIF, f, ## a) +#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a) +#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a) +#define IPW_DEBUG_STATS(f, a...) IPW_DEBUG(IPW_DL_STATS, f, ## a) + +#include <linux/ctype.h> + +/* +* Register bit definitions +*/ + +/* Dino control registers bits */ + +#define DINO_ENABLE_SYSTEM 0x80 +#define DINO_ENABLE_CS 0x40 +#define DINO_RXFIFO_DATA 0x01 +#define DINO_CONTROL_REG 0x00200000 + +#define CX2_INTA_RW 0x00000008 +#define CX2_INTA_MASK_R 0x0000000C +#define CX2_INDIRECT_ADDR 0x00000010 +#define CX2_INDIRECT_DATA 0x00000014 +#define CX2_AUTOINC_ADDR 0x00000018 +#define CX2_AUTOINC_DATA 0x0000001C +#define CX2_RESET_REG 0x00000020 +#define CX2_GP_CNTRL_RW 0x00000024 + +#define CX2_READ_INT_REGISTER 0xFF4 + +#define CX2_GP_CNTRL_BIT_INIT_DONE 0x00000004 + +#define CX2_REGISTER_DOMAIN1_END 0x00001000 +#define CX2_SRAM_READ_INT_REGISTER 0x00000ff4 + +#define CX2_SHARED_LOWER_BOUND 0x00000200 +#define CX2_INTERRUPT_AREA_LOWER_BOUND 0x00000f80 + +#define CX2_NIC_SRAM_LOWER_BOUND 0x00000000 +#define CX2_NIC_SRAM_UPPER_BOUND 0x00030000 + +#define CX2_BIT_INT_HOST_SRAM_READ_INT_REGISTER (1 << 29) +#define CX2_GP_CNTRL_BIT_CLOCK_READY 0x00000001 +#define CX2_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY 0x00000002 + +/* + * RESET Register Bit Indexes + */ +#define CBD_RESET_REG_PRINCETON_RESET 0x00000001 /* Bit 0 (LSB) */ +#define CX2_RESET_REG_SW_RESET 0x00000080 /* Bit 7 */ +#define CX2_RESET_REG_MASTER_DISABLED 0x00000100 /* Bit 8 */ +#define CX2_RESET_REG_STOP_MASTER 0x00000200 /* Bit 9 */ +#define CX2_ARC_KESHET_CONFIG 0x08000000 /* Bit 27 */ +#define CX2_START_STANDBY 0x00000004 /* Bit 2 */ + +#define CX2_CSR_CIS_UPPER_BOUND 0x00000200 +#define CX2_DOMAIN_0_END 0x1000 +#define CLX_MEM_BAR_SIZE 0x1000 + +#define CX2_BASEBAND_CONTROL_STATUS 0X00200000 +#define CX2_BASEBAND_TX_FIFO_WRITE 0X00200004 +#define CX2_BASEBAND_RX_FIFO_READ 0X00200004 +#define CX2_BASEBAND_CONTROL_STORE 0X00200010 + +#define CX2_INTERNAL_CMD_EVENT 0X00300004 +#define CX2_BASEBAND_POWER_DOWN 0x00000001 + +#define CX2_MEM_HALT_AND_RESET 0x003000e0 + +/* defgroup bits_halt_reset MEM_HALT_AND_RESET register bits */ +#define CX2_BIT_HALT_RESET_ON 0x80000000 +#define CX2_BIT_HALT_RESET_OFF 0x00000000 + +#define CB_LAST_VALID 0x20000000 +#define CB_INT_ENABLED 0x40000000 +#define CB_VALID 0x80000000 +#define CB_SRC_LE 0x08000000 +#define CB_DEST_LE 0x04000000 +#define CB_SRC_AUTOINC 0x00800000 +#define CB_SRC_IO_GATED 0x00400000 +#define CB_DEST_AUTOINC 0x00080000 +#define CB_SRC_SIZE_LONG 0x00200000 +#define CB_DEST_SIZE_LONG 0x00020000 + +/* DMA DEFINES */ + +#define DMA_CONTROL_SMALL_CB_CONST_VALUE 0x00540000 +#define DMA_CB_STOP_AND_ABORT 0x00000C00 +#define DMA_CB_START 0x00000100 + +#define CX2_SHARED_SRAM_SIZE 0x00030000 +#define CX2_SHARED_SRAM_DMA_CONTROL 0x00027000 +#define CB_MAX_LENGTH 0x1FFF + +#define CX2_HOST_EEPROM_DATA_SRAM_SIZE 0xA18 +#define CX2_EEPROM_IMAGE_SIZE 0x100 + +/* DMA defs */ +#define CX2_DMA_I_CURRENT_CB 0x003000D0 +#define CX2_DMA_O_CURRENT_CB 0x003000D4 +#define CX2_DMA_I_DMA_CONTROL 0x003000A4 +#define CX2_DMA_I_CB_BASE 0x003000A0 + +#define CX2_TX_CMD_QUEUE_BD_BASE (0x00000200) +#define CX2_TX_CMD_QUEUE_BD_SIZE (0x00000204) +#define CX2_TX_QUEUE_0_BD_BASE (0x00000208) +#define CX2_TX_QUEUE_0_BD_SIZE (0x0000020C) +#define CX2_TX_QUEUE_1_BD_BASE (0x00000210) +#define CX2_TX_QUEUE_1_BD_SIZE (0x00000214) +#define CX2_TX_QUEUE_2_BD_BASE (0x00000218) +#define CX2_TX_QUEUE_2_BD_SIZE (0x0000021C) +#define CX2_TX_QUEUE_3_BD_BASE (0x00000220) +#define CX2_TX_QUEUE_3_BD_SIZE (0x00000224) +#define CX2_RX_BD_BASE (0x00000240) +#define CX2_RX_BD_SIZE (0x00000244) +#define CX2_RFDS_TABLE_LOWER (0x00000500) + +#define CX2_TX_CMD_QUEUE_READ_INDEX (0x00000280) +#define CX2_TX_QUEUE_0_READ_INDEX (0x00000284) +#define CX2_TX_QUEUE_1_READ_INDEX (0x00000288) +#define CX2_TX_QUEUE_2_READ_INDEX (0x0000028C) +#define CX2_TX_QUEUE_3_READ_INDEX (0x00000290) +#define CX2_RX_READ_INDEX (0x000002A0) + +#define CX2_TX_CMD_QUEUE_WRITE_INDEX (0x00000F80) +#define CX2_TX_QUEUE_0_WRITE_INDEX (0x00000F84) +#define CX2_TX_QUEUE_1_WRITE_INDEX (0x00000F88) +#define CX2_TX_QUEUE_2_WRITE_INDEX (0x00000F8C) +#define CX2_TX_QUEUE_3_WRITE_INDEX (0x00000F90) +#define CX2_RX_WRITE_INDEX (0x00000FA0) + +/* + * EEPROM Related Definitions + */ + +#define IPW_EEPROM_DATA_SRAM_ADDRESS (CX2_SHARED_LOWER_BOUND + 0x814) +#define IPW_EEPROM_DATA_SRAM_SIZE (CX2_SHARED_LOWER_BOUND + 0x818) +#define IPW_EEPROM_LOAD_DISABLE (CX2_SHARED_LOWER_BOUND + 0x81C) +#define IPW_EEPROM_DATA (CX2_SHARED_LOWER_BOUND + 0x820) +#define IPW_EEPROM_UPPER_ADDRESS (CX2_SHARED_LOWER_BOUND + 0x9E0) + +#define IPW_STATION_TABLE_LOWER (CX2_SHARED_LOWER_BOUND + 0xA0C) +#define IPW_STATION_TABLE_UPPER (CX2_SHARED_LOWER_BOUND + 0xB0C) +#define IPW_REQUEST_ATIM (CX2_SHARED_LOWER_BOUND + 0xB0C) +#define IPW_ATIM_SENT (CX2_SHARED_LOWER_BOUND + 0xB10) +#define IPW_WHO_IS_AWAKE (CX2_SHARED_LOWER_BOUND + 0xB14) +#define IPW_DURING_ATIM_WINDOW (CX2_SHARED_LOWER_BOUND + 0xB18) + +#define MSB 1 +#define LSB 0 +#define WORD_TO_BYTE(_word) ((_word) * sizeof(u16)) + +#define GET_EEPROM_ADDR(_wordoffset,_byteoffset) \ + ( WORD_TO_BYTE(_wordoffset) + (_byteoffset) ) + +/* EEPROM access by BYTE */ +#define EEPROM_PME_CAPABILITY (GET_EEPROM_ADDR(0x09,MSB)) /* 1 byte */ +#define EEPROM_MAC_ADDRESS (GET_EEPROM_ADDR(0x21,LSB)) /* 6 byte */ +#define EEPROM_VERSION (GET_EEPROM_ADDR(0x24,MSB)) /* 1 byte */ +#define EEPROM_NIC_TYPE (GET_EEPROM_ADDR(0x25,LSB)) /* 1 byte */ +#define EEPROM_SKU_CAPABILITY (GET_EEPROM_ADDR(0x25,MSB)) /* 1 byte */ +#define EEPROM_COUNTRY_CODE (GET_EEPROM_ADDR(0x26,LSB)) /* 3 bytes */ +#define EEPROM_IBSS_CHANNELS_BG (GET_EEPROM_ADDR(0x28,LSB)) /* 2 bytes */ +#define EEPROM_IBSS_CHANNELS_A (GET_EEPROM_ADDR(0x29,MSB)) /* 5 bytes */ +#define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */ +#define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */ + +/* NIC type as found in the one byte EEPROM_NIC_TYPE offset*/ +#define EEPROM_NIC_TYPE_STANDARD 0 +#define EEPROM_NIC_TYPE_DELL 1 +#define EEPROM_NIC_TYPE_FUJITSU 2 +#define EEPROM_NIC_TYPE_IBM 3 +#define EEPROM_NIC_TYPE_HP 4 + +#define FW_MEM_REG_LOWER_BOUND 0x00300000 +#define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40) + +#define EEPROM_BIT_SK (1<<0) +#define EEPROM_BIT_CS (1<<1) +#define EEPROM_BIT_DI (1<<2) +#define EEPROM_BIT_DO (1<<4) + +#define EEPROM_CMD_READ 0x2 + +/* Interrupts masks */ +#define CX2_INTA_NONE 0x00000000 + +#define CX2_INTA_BIT_RX_TRANSFER 0x00000002 +#define CX2_INTA_BIT_STATUS_CHANGE 0x00000010 +#define CX2_INTA_BIT_BEACON_PERIOD_EXPIRED 0x00000020 + +//Inta Bits for CF +#define CX2_INTA_BIT_TX_CMD_QUEUE 0x00000800 +#define CX2_INTA_BIT_TX_QUEUE_1 0x00001000 +#define CX2_INTA_BIT_TX_QUEUE_2 0x00002000 +#define CX2_INTA_BIT_TX_QUEUE_3 0x00004000 +#define CX2_INTA_BIT_TX_QUEUE_4 0x00008000 + +#define CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE 0x00010000 + +#define CX2_INTA_BIT_PREPARE_FOR_POWER_DOWN 0x00100000 +#define CX2_INTA_BIT_POWER_DOWN 0x00200000 + +#define CX2_INTA_BIT_FW_INITIALIZATION_DONE 0x01000000 +#define CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE 0x02000000 +#define CX2_INTA_BIT_RF_KILL_DONE 0x04000000 +#define CX2_INTA_BIT_FATAL_ERROR 0x40000000 +#define CX2_INTA_BIT_PARITY_ERROR 0x80000000 + +/* Interrupts enabled at init time. */ +#define CX2_INTA_MASK_ALL \ + (CX2_INTA_BIT_TX_QUEUE_1 | \ + CX2_INTA_BIT_TX_QUEUE_2 | \ + CX2_INTA_BIT_TX_QUEUE_3 | \ + CX2_INTA_BIT_TX_QUEUE_4 | \ + CX2_INTA_BIT_TX_CMD_QUEUE | \ + CX2_INTA_BIT_RX_TRANSFER | \ + CX2_INTA_BIT_FATAL_ERROR | \ + CX2_INTA_BIT_PARITY_ERROR | \ + CX2_INTA_BIT_STATUS_CHANGE | \ + CX2_INTA_BIT_FW_INITIALIZATION_DONE | \ + CX2_INTA_BIT_BEACON_PERIOD_EXPIRED | \ + CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE | \ + CX2_INTA_BIT_PREPARE_FOR_POWER_DOWN | \ + CX2_INTA_BIT_POWER_DOWN | \ + CX2_INTA_BIT_RF_KILL_DONE ) + +#define IPWSTATUS_ERROR_LOG (CX2_SHARED_LOWER_BOUND + 0x410) +#define IPW_EVENT_LOG (CX2_SHARED_LOWER_BOUND + 0x414) + +/* FW event log definitions */ +#define EVENT_ELEM_SIZE (3 * sizeof(u32)) +#define EVENT_START_OFFSET (1 * sizeof(u32) + 2 * sizeof(u16)) + +/* FW error log definitions */ +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) +#define ERROR_START_OFFSET (1 * sizeof(u32)) + +enum { + IPW_FW_ERROR_OK = 0, + IPW_FW_ERROR_FAIL, + IPW_FW_ERROR_MEMORY_UNDERFLOW, + IPW_FW_ERROR_MEMORY_OVERFLOW, + IPW_FW_ERROR_BAD_PARAM, + IPW_FW_ERROR_BAD_CHECKSUM, + IPW_FW_ERROR_NMI_INTERRUPT, + IPW_FW_ERROR_BAD_DATABASE, + IPW_FW_ERROR_ALLOC_FAIL, + IPW_FW_ERROR_DMA_UNDERRUN, + IPW_FW_ERROR_DMA_STATUS, + IPW_FW_ERROR_DINOSTATUS_ERROR, + IPW_FW_ERROR_EEPROMSTATUS_ERROR, + IPW_FW_ERROR_SYSASSERT, + IPW_FW_ERROR_FATAL_ERROR +}; + +#define AUTH_OPEN 0 +#define AUTH_SHARED_KEY 1 +#define AUTH_IGNORE 3 + +#define HC_ASSOCIATE 0 +#define HC_REASSOCIATE 1 +#define HC_DISASSOCIATE 2 +#define HC_IBSS_START 3 +#define HC_IBSS_RECONF 4 +#define HC_DISASSOC_QUIET 5 + +#define IPW_RATE_CAPABILITIES 1 +#define IPW_RATE_CONNECT 0 + +/* + * Rate values and masks + */ +#define IPW_TX_RATE_1MB 0x0A +#define IPW_TX_RATE_2MB 0x14 +#define IPW_TX_RATE_5MB 0x37 +#define IPW_TX_RATE_6MB 0x0D +#define IPW_TX_RATE_9MB 0x0F +#define IPW_TX_RATE_11MB 0x6E +#define IPW_TX_RATE_12MB 0x05 +#define IPW_TX_RATE_18MB 0x07 +#define IPW_TX_RATE_24MB 0x09 +#define IPW_TX_RATE_36MB 0x0B +#define IPW_TX_RATE_48MB 0x01 +#define IPW_TX_RATE_54MB 0x03 + +#define IPW_ORD_TABLE_ID_MASK 0x0000FF00 +#define IPW_ORD_TABLE_VALUE_MASK 0x000000FF + +#define IPW_ORD_TABLE_0_MASK 0x0000F000 +#define IPW_ORD_TABLE_1_MASK 0x0000F100 +#define IPW_ORD_TABLE_2_MASK 0x0000F200 +#define IPW_ORD_TABLE_3_MASK 0x0000F300 +#define IPW_ORD_TABLE_4_MASK 0x0000F400 +#define IPW_ORD_TABLE_5_MASK 0x0000F500 +#define IPW_ORD_TABLE_6_MASK 0x0000F600 +#define IPW_ORD_TABLE_7_MASK 0x0000F700 + +/* + * Table 0 Entries (all entries are 32 bits) + */ +enum { + IPW_ORD_STAT_TX_CURR_RATE = IPW_ORD_TABLE_0_MASK + 1, + IPW_ORD_STAT_FRAG_TRESHOLD, + IPW_ORD_STAT_RTS_THRESHOLD, + IPW_ORD_STAT_TX_HOST_REQUESTS, + IPW_ORD_STAT_TX_HOST_COMPLETE, + IPW_ORD_STAT_TX_DIR_DATA, + IPW_ORD_STAT_TX_DIR_DATA_B_1, + IPW_ORD_STAT_TX_DIR_DATA_B_2, + IPW_ORD_STAT_TX_DIR_DATA_B_5_5, + IPW_ORD_STAT_TX_DIR_DATA_B_11, + /* Hole */ + + IPW_ORD_STAT_TX_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 19, + IPW_ORD_STAT_TX_DIR_DATA_G_2, + IPW_ORD_STAT_TX_DIR_DATA_G_5_5, + IPW_ORD_STAT_TX_DIR_DATA_G_6, + IPW_ORD_STAT_TX_DIR_DATA_G_9, + IPW_ORD_STAT_TX_DIR_DATA_G_11, + IPW_ORD_STAT_TX_DIR_DATA_G_12, + IPW_ORD_STAT_TX_DIR_DATA_G_18, + IPW_ORD_STAT_TX_DIR_DATA_G_24, + IPW_ORD_STAT_TX_DIR_DATA_G_36, + IPW_ORD_STAT_TX_DIR_DATA_G_48, + IPW_ORD_STAT_TX_DIR_DATA_G_54, + IPW_ORD_STAT_TX_NON_DIR_DATA, + IPW_ORD_STAT_TX_NON_DIR_DATA_B_1, + IPW_ORD_STAT_TX_NON_DIR_DATA_B_2, + IPW_ORD_STAT_TX_NON_DIR_DATA_B_5_5, + IPW_ORD_STAT_TX_NON_DIR_DATA_B_11, + /* Hole */ + + IPW_ORD_STAT_TX_NON_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 44, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_2, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_5_5, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_6, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_9, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_11, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_12, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_18, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_24, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_36, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_48, + IPW_ORD_STAT_TX_NON_DIR_DATA_G_54, + IPW_ORD_STAT_TX_RETRY, + IPW_ORD_STAT_TX_FAILURE, + IPW_ORD_STAT_RX_ERR_CRC, + IPW_ORD_STAT_RX_ERR_ICV, + IPW_ORD_STAT_RX_NO_BUFFER, + IPW_ORD_STAT_FULL_SCANS, + IPW_ORD_STAT_PARTIAL_SCANS, + IPW_ORD_STAT_TGH_ABORTED_SCANS, + IPW_ORD_STAT_TX_TOTAL_BYTES, + IPW_ORD_STAT_CURR_RSSI_RAW, + IPW_ORD_STAT_RX_BEACON, + IPW_ORD_STAT_MISSED_BEACONS, + IPW_ORD_TABLE_0_LAST +}; + +#define IPW_RSSI_TO_DBM 112 + +/* Table 1 Entries + */ +enum { + IPW_ORD_TABLE_1_LAST = IPW_ORD_TABLE_1_MASK | 1, +}; + +/* + * Table 2 Entries + * + * FW_VERSION: 16 byte string + * FW_DATE: 16 byte string (only 14 bytes used) + * UCODE_VERSION: 4 byte version code + * UCODE_DATE: 5 bytes code code + * ADDAPTER_MAC: 6 byte MAC address + * RTC: 4 byte clock + */ +enum { + IPW_ORD_STAT_FW_VERSION = IPW_ORD_TABLE_2_MASK | 1, + IPW_ORD_STAT_FW_DATE, + IPW_ORD_STAT_UCODE_VERSION, + IPW_ORD_STAT_UCODE_DATE, + IPW_ORD_STAT_ADAPTER_MAC, + IPW_ORD_STAT_RTC, + IPW_ORD_TABLE_2_LAST +}; + +/* Table 3 */ +enum { + IPW_ORD_STAT_TX_PACKET = IPW_ORD_TABLE_3_MASK | 0, + IPW_ORD_STAT_TX_PACKET_FAILURE, + IPW_ORD_STAT_TX_PACKET_SUCCESS, + IPW_ORD_STAT_TX_PACKET_ABORTED, + IPW_ORD_TABLE_3_LAST +}; + +/* Table 4 */ +enum { + IPW_ORD_TABLE_4_LAST = IPW_ORD_TABLE_4_MASK +}; + +/* Table 5 */ +enum { + IPW_ORD_STAT_AVAILABLE_AP_COUNT = IPW_ORD_TABLE_5_MASK, + IPW_ORD_STAT_AP_ASSNS, + IPW_ORD_STAT_ROAM, + IPW_ORD_STAT_ROAM_CAUSE_MISSED_BEACONS, + IPW_ORD_STAT_ROAM_CAUSE_UNASSOC, + IPW_ORD_STAT_ROAM_CAUSE_RSSI, + IPW_ORD_STAT_ROAM_CAUSE_LINK_QUALITY, + IPW_ORD_STAT_ROAM_CAUSE_AP_LOAD_BALANCE, + IPW_ORD_STAT_ROAM_CAUSE_AP_NO_TX, + IPW_ORD_STAT_LINK_UP, + IPW_ORD_STAT_LINK_DOWN, + IPW_ORD_ANTENNA_DIVERSITY, + IPW_ORD_CURR_FREQ, + IPW_ORD_TABLE_5_LAST +}; + +/* Table 6 */ +enum { + IPW_ORD_COUNTRY_CODE = IPW_ORD_TABLE_6_MASK, + IPW_ORD_CURR_BSSID, + IPW_ORD_CURR_SSID, + IPW_ORD_TABLE_6_LAST +}; + +/* Table 7 */ +enum { + IPW_ORD_STAT_PERCENT_MISSED_BEACONS = IPW_ORD_TABLE_7_MASK, + IPW_ORD_STAT_PERCENT_TX_RETRIES, + IPW_ORD_STAT_PERCENT_LINK_QUALITY, + IPW_ORD_STAT_CURR_RSSI_DBM, + IPW_ORD_TABLE_7_LAST +}; + +#define IPW_ORDINALS_TABLE_LOWER (CX2_SHARED_LOWER_BOUND + 0x500) +#define IPW_ORDINALS_TABLE_0 (CX2_SHARED_LOWER_BOUND + 0x180) +#define IPW_ORDINALS_TABLE_1 (CX2_SHARED_LOWER_BOUND + 0x184) +#define IPW_ORDINALS_TABLE_2 (CX2_SHARED_LOWER_BOUND + 0x188) +#define IPW_MEM_FIXED_OVERRIDE (CX2_SHARED_LOWER_BOUND + 0x41C) + +struct ipw_fixed_rate { + u16 tx_rates; + u16 reserved; +} __attribute__ ((packed)); + +#define CX2_INDIRECT_ADDR_MASK (~0x3ul) + +struct host_cmd { + u8 cmd; + u8 len; + u16 reserved; + u32 param[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH]; +} __attribute__ ((packed)); + +#define CFG_BT_COEXISTENCE_MIN 0x00 +#define CFG_BT_COEXISTENCE_DEFER 0x02 +#define CFG_BT_COEXISTENCE_KILL 0x04 +#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 +#define CFG_BT_COEXISTENCE_OOB 0x10 +#define CFG_BT_COEXISTENCE_MAX 0xFF +#define CFG_BT_COEXISTENCE_DEF 0x80 /* read Bt from EEPROM */ + +#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x0 +#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x1 +#define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN + +#define CFG_SYS_ANTENNA_BOTH 0x000 +#define CFG_SYS_ANTENNA_A 0x001 +#define CFG_SYS_ANTENNA_B 0x003 + +/* + * The definitions below were lifted off the ipw2100 driver, which only + * supports 'b' mode, so I'm sure these are not exactly correct. + * + * Somebody fix these!! + */ +#define REG_MIN_CHANNEL 0 +#define REG_MAX_CHANNEL 14 + +#define REG_CHANNEL_MASK 0x00003FFF +#define IPW_IBSS_11B_DEFAULT_MASK 0x87ff + +static const long ipw_frequencies[] = { + 2412, 2417, 2422, 2427, + 2432, 2437, 2442, 2447, + 2452, 2457, 2462, 2467, + 2472, 2484 +}; + +#define FREQ_COUNT ARRAY_SIZE(ipw_frequencies) + +#define IPW_MAX_CONFIG_RETRIES 10 + +static inline u32 frame_hdr_len(struct ieee80211_hdr *hdr) +{ + u32 retval; + u16 fc; + + retval = sizeof(struct ieee80211_hdr); + fc = le16_to_cpu(hdr->frame_ctl); + + /* + * Function ToDS FromDS + * IBSS 0 0 + * To AP 1 0 + * From AP 0 1 + * WDS (bridge) 1 1 + * + * Only WDS frames use Address4 among them. --YZ + */ + if (!(fc & IEEE80211_FCTL_TODS) || !(fc & IEEE80211_FCTL_FROMDS)) + retval -= ETH_ALEN; + + return retval; +} + +#endif /* __ipw2200_h__ */ diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index 5f507c49907..ca6c03c8992 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -471,12 +471,12 @@ static dev_link_t *netwave_attach(void) dev->get_stats = &netwave_get_stats; dev->set_multicast_list = &set_multicast_list; /* wireless extensions */ -#ifdef WIRELESS_EXT +#if WIRELESS_EXT <= 16 dev->get_wireless_stats = &netwave_get_wireless_stats; +#endif /* WIRELESS_EXT <= 16 */ #if WIRELESS_EXT > 12 dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def; #endif /* WIRELESS_EXT > 12 */ -#endif /* WIRELESS_EXT */ dev->do_ioctl = &netwave_ioctl; dev->tx_timeout = &netwave_watchdog; @@ -839,6 +839,9 @@ static const struct iw_handler_def netwave_handler_def = .standard = (iw_handler *) netwave_handler, .private = (iw_handler *) netwave_private_handler, .private_args = (struct iw_priv_args *) netwave_private_args, +#if WIRELESS_EXT > 16 + .get_wireless_stats = netwave_get_wireless_stats, +#endif /* WIRELESS_EXT > 16 */ }; #endif /* WIRELESS_EXT > 12 */ diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 9c2d07cde01..8de49fe5723 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -94,6 +94,8 @@ #include <net/iw_handler.h> #include <net/ieee80211.h> +#include <net/ieee80211.h> + #include <asm/uaccess.h> #include <asm/io.h> #include <asm/system.h> @@ -101,7 +103,6 @@ #include "hermes.h" #include "hermes_rid.h" #include "orinoco.h" -#include "ieee802_11.h" /********************************************************************/ /* Module information */ @@ -150,7 +151,7 @@ static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) #define ORINOCO_MIN_MTU 256 -#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) +#define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD) #define SYMBOL_MAX_VER_LEN (14) #define USER_BAP 0 @@ -442,7 +443,7 @@ static int orinoco_change_mtu(struct net_device *dev, int new_mtu) if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) return -EINVAL; - if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) > + if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) > (priv->nicbuf_size - ETH_HLEN) ) return -EINVAL; @@ -918,7 +919,7 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) data. */ return; } - if (length > IEEE802_11_DATA_LEN) { + if (length > IEEE80211_DATA_LEN) { printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", dev->name, length); stats->rx_length_errors++; @@ -1052,8 +1053,9 @@ static void orinoco_join_ap(struct net_device *dev) u16 channel; } __attribute__ ((packed)) req; const int atom_len = offsetof(struct prism2_scan_apinfo, atim); - struct prism2_scan_apinfo *atom; + struct prism2_scan_apinfo *atom = NULL; int offset = 4; + int found = 0; u8 *buf; u16 len; @@ -1088,15 +1090,18 @@ static void orinoco_join_ap(struct net_device *dev) * we were requested to join */ for (; offset + atom_len <= len; offset += atom_len) { atom = (struct prism2_scan_apinfo *) (buf + offset); - if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) - goto found; + if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { + found = 1; + break; + } } - DEBUG(1, "%s: Requested AP not found in scan results\n", - dev->name); - goto out; + if (! found) { + DEBUG(1, "%s: Requested AP not found in scan results\n", + dev->name); + goto out; + } - found: memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); req.channel = atom->channel; /* both are little-endian */ err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, @@ -1283,8 +1288,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) /* Read scan data */ err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, infofid, sizeof(info)); - if (err) + if (err) { + kfree(buf); break; + } #ifdef ORINOCO_DEBUG { @@ -2272,7 +2279,7 @@ static int orinoco_init(struct net_device *dev) /* No need to lock, the hw_unavailable flag is already set in * alloc_orinocodev() */ - priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; + priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ err = orinoco_reinit_firmware(dev); @@ -4020,7 +4027,8 @@ static int orinoco_ioctl_setscan(struct net_device *dev, } /* Translate scan data returned from the card to a card independant - * format that the Wireless Tools will understand - Jean II */ + * format that the Wireless Tools will understand - Jean II + * Return message length or -errno for fatal errors */ static inline int orinoco_translate_scan(struct net_device *dev, char *buffer, char *scan, @@ -4060,13 +4068,19 @@ static inline int orinoco_translate_scan(struct net_device *dev, break; case FIRMWARE_TYPE_INTERSIL: offset = 4; - if (priv->has_hostscan) - atom_len = scan[0] + (scan[1] << 8); - else + if (priv->has_hostscan) { + atom_len = le16_to_cpup((u16 *)scan); + /* Sanity check for atom_len */ + if (atom_len < sizeof(struct prism2_scan_apinfo)) { + printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n", + dev->name, atom_len); + return -EIO; + } + } else atom_len = offsetof(struct prism2_scan_apinfo, atim); break; default: - return 0; + return -EOPNOTSUPP; } /* Check that we got an whole number of atoms */ @@ -4074,7 +4088,7 @@ static inline int orinoco_translate_scan(struct net_device *dev, printk(KERN_ERR "%s: Unexpected scan data length %d, " "atom_len %d, offset %d\n", dev->name, scan_len, atom_len, offset); - return 0; + return -EIO; } /* Read the entries one by one */ @@ -4209,33 +4223,41 @@ static int orinoco_ioctl_getscan(struct net_device *dev, /* We have some results to push back to user space */ /* Translate to WE format */ - srq->length = orinoco_translate_scan(dev, extra, - priv->scan_result, - priv->scan_len); - - /* Return flags */ - srq->flags = (__u16) priv->scan_mode; + int ret = orinoco_translate_scan(dev, extra, + priv->scan_result, + priv->scan_len); + + if (ret < 0) { + err = ret; + kfree(priv->scan_result); + priv->scan_result = NULL; + } else { + srq->length = ret; - /* Results are here, so scan no longer in progress */ - priv->scan_inprogress = 0; + /* Return flags */ + srq->flags = (__u16) priv->scan_mode; - /* In any case, Scan results will be cleaned up in the - * reset function and when exiting the driver. - * The person triggering the scanning may never come to - * pick the results, so we need to do it in those places. - * Jean II */ + /* In any case, Scan results will be cleaned up in the + * reset function and when exiting the driver. + * The person triggering the scanning may never come to + * pick the results, so we need to do it in those places. + * Jean II */ #ifdef SCAN_SINGLE_READ - /* If you enable this option, only one client (the first - * one) will be able to read the result (and only one - * time). If there is multiple concurent clients that - * want to read scan results, this behavior is not - * advisable - Jean II */ - kfree(priv->scan_result); - priv->scan_result = NULL; + /* If you enable this option, only one client (the first + * one) will be able to read the result (and only one + * time). If there is multiple concurent clients that + * want to read scan results, this behavior is not + * advisable - Jean II */ + kfree(priv->scan_result); + priv->scan_result = NULL; #endif /* SCAN_SINGLE_READ */ - /* Here, if too much time has elapsed since last scan, - * we may want to clean up scan results... - Jean II */ + /* Here, if too much time has elapsed since last scan, + * we may want to clean up scan results... - Jean II */ + } + + /* Scan is no longer in progress */ + priv->scan_inprogress = 0; } orinoco_unlock(priv, &flags); diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1cc1492083c..d1fb1bab8aa 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -604,7 +604,6 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c new file mode 100644 index 00000000000..86fa58e5cfa --- /dev/null +++ b/drivers/net/wireless/orinoco_nortel.c @@ -0,0 +1,324 @@ +/* orinoco_nortel.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter. + * + * Copyright (C) 2002 Tobias Hoffmann + * (C) 2003 Christoph Jungegger <disdos@traum404.de> + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow + * Some of this code is borrowed from orinoco_pci.c + * Copyright (C) 2001 Jean Tourrilhes + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#define DRIVER_NAME "orinoco_nortel" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/fcntl.h> + +#include <pcmcia/cisreg.h> + +#include "hermes.h" +#include "orinoco.h" + +#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ + + +/* Nortel specific data */ +struct nortel_pci_card { + unsigned long iobase1; + unsigned long iobase2; +}; + +/* + * Do a soft reset of the PCI card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int nortel_pci_cor_reset(struct orinoco_private *priv) +{ + struct nortel_pci_card *card = priv->card; + + /* Assert the reset until the card notice */ + outw_p(8, card->iobase1 + 2); + inw(card->iobase2 + COR_OFFSET); + outw_p(0x80, card->iobase2 + COR_OFFSET); + mdelay(1); + + /* Give time for the card to recover from this hard effort */ + outw_p(0, card->iobase2 + COR_OFFSET); + outw_p(0, card->iobase2 + COR_OFFSET); + mdelay(1); + + /* set COR as usual */ + outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); + outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); + mdelay(1); + + outw_p(0x228, card->iobase1 + 2); + + return 0; +} + +int nortel_pci_hw_init(struct nortel_pci_card *card) +{ + int i; + u32 reg; + + /* setup bridge */ + if (inw(card->iobase1) & 1) { + printk(KERN_ERR PFX "brg1 answer1 wrong\n"); + return -EBUSY; + } + outw_p(0x118, card->iobase1 + 2); + outw_p(0x108, card->iobase1 + 2); + mdelay(30); + outw_p(0x8, card->iobase1 + 2); + for (i = 0; i < 30; i++) { + mdelay(30); + if (inw(card->iobase1) & 0x10) { + break; + } + } + if (i == 30) { + printk(KERN_ERR PFX "brg1 timed out\n"); + return -EBUSY; + } + if (inw(card->iobase2 + 0xe0) & 1) { + printk(KERN_ERR PFX "brg2 answer1 wrong\n"); + return -EBUSY; + } + if (inw(card->iobase2 + 0xe2) & 1) { + printk(KERN_ERR PFX "brg2 answer2 wrong\n"); + return -EBUSY; + } + if (inw(card->iobase2 + 0xe4) & 1) { + printk(KERN_ERR PFX "brg2 answer3 wrong\n"); + return -EBUSY; + } + + /* set the PCMCIA COR-Register */ + outw_p(COR_VALUE, card->iobase2 + COR_OFFSET); + mdelay(1); + reg = inw(card->iobase2 + COR_OFFSET); + if (reg != COR_VALUE) { + printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", + reg); + return -EBUSY; + } + + /* set leds */ + outw_p(1, card->iobase1 + 10); + return 0; +} + +static int nortel_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct nortel_pci_card *card; + struct net_device *dev; + void __iomem *iomem; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err != 0) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + iomem = pci_iomap(pdev, 3, 0); + if (!iomem) { + err = -ENOMEM; + goto fail_map_io; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), nortel_pci_cor_reset); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->iobase1 = pci_resource_start(pdev, 0); + card->iobase2 = pci_resource_start(pdev, 1); + dev->base_addr = pci_resource_start(pdev, 2); + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, iomem, HERMES_16BIT_REGSPACING); + + printk(KERN_DEBUG PFX "Detected Nortel PCI device at %s irq:%d, " + "io addr:0x%lx\n", pci_name(pdev), pdev->irq, dev->base_addr); + + err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + dev->irq = pdev->irq; + + err = nortel_pci_hw_init(card); + if (err) { + printk(KERN_ERR PFX "Hardware initialization failed\n"); + goto fail; + } + + err = nortel_pci_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, iomem); + + fail_map_io: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit nortel_pci_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct nortel_pci_card *card = priv->card; + + /* clear leds */ + outw_p(0, card->iobase1 + 10); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + + +static struct pci_device_id nortel_pci_id_table[] = { + /* Nortel emobility PCI */ + {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, nortel_pci_id_table); + +static struct pci_driver nortel_pci_driver = { + .name = DRIVER_NAME, + .id_table = nortel_pci_id_table, + .probe = nortel_pci_init_one, + .remove = __devexit_p(nortel_pci_remove_one), +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; +MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); +MODULE_DESCRIPTION + ("Driver for wireless LAN cards using the Nortel PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init nortel_pci_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_module_init(&nortel_pci_driver); +} + +static void __exit nortel_pci_exit(void) +{ + pci_unregister_driver(&nortel_pci_driver); + ssleep(1); +} + +module_init(nortel_pci_init); +module_exit(nortel_pci_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 7a6f52ea7fa..42e03438291 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -301,8 +301,6 @@ static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) unsigned long flags; int err; - printk(KERN_DEBUG "%s: Orinoco-PCI entering sleep mode (state=%d)\n", - dev->name, state); err = orinoco_lock(priv, &flags); if (err) { diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 0f29a9c7bc2..9a8790e3580 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -2727,6 +2727,9 @@ const struct iw_handler_def prism54_handler_def = { .standard = (iw_handler *) prism54_handler, .private = (iw_handler *) prism54_private_handler, .private_args = (struct iw_priv_args *) prism54_private_args, +#if WIRELESS_EXT > 16 + .get_wireless_stats = prism54_get_wireless_stats, +#endif /* WIRELESS_EXT > 16 */ #if WIRELESS_EXT == 16 .spy_offset = offsetof(islpci_private, spy_data), #endif /* WIRELESS_EXT == 16 */ diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index efab07e9e24..6f13d4a8e2d 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -815,7 +815,6 @@ islpci_setup(struct pci_dev *pdev) ndev->open = &islpci_open; ndev->stop = &islpci_close; ndev->get_stats = &islpci_statistics; - ndev->get_wireless_stats = &prism54_get_wireless_stats; ndev->do_ioctl = &prism54_ioctl; ndev->wireless_handlers = (struct iw_handler_def *) &prism54_handler_def; @@ -844,6 +843,8 @@ islpci_setup(struct pci_dev *pdev) /* Add pointers to enable iwspy support. */ priv->wireless_data.spy_data = &priv->spy_data; ndev->wireless_data = &priv->wireless_data; +#else /* WIRELESS_EXT > 16 */ + ndev->get_wireless_stats = &prism54_get_wireless_stats; #endif /* WIRELESS_EXT > 16 */ /* save the start and end address of the PCI memory area */ diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index c17391d947f..dc040caab7d 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -267,8 +267,6 @@ prism54_suspend(struct pci_dev *pdev, pm_message_t state) islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; BUG_ON(!priv); - printk(KERN_NOTICE "%s: got suspend request (state %d)\n", - ndev->name, state); pci_save_state(pdev); diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 0e0ba614259..e9c5ea0f553 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -53,6 +53,7 @@ #include <pcmcia/ds.h> #include <pcmcia/mem_op.h> +#include <net/ieee80211.h> #include <linux/wireless.h> #include <asm/io.h> @@ -64,7 +65,6 @@ #define WIRELESS_SPY /* Enable spying addresses */ /* Definitions we need for spy */ typedef struct iw_statistics iw_stats; -typedef struct iw_quality iw_qual; typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */ #include "rayctl.h" @@ -101,7 +101,6 @@ static int ray_dev_close(struct net_device *dev); static int ray_dev_config(struct net_device *dev, struct ifmap *map); static struct net_device_stats *ray_get_stats(struct net_device *dev); static int ray_dev_init(struct net_device *dev); -static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); static struct ethtool_ops netdev_ethtool_ops; @@ -114,9 +113,8 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type, unsigned char *data); static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len); -#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ static iw_stats * ray_get_wireless_stats(struct net_device * dev); -#endif /* WIRELESS_EXT > 7 */ +static const struct iw_handler_def ray_handler_def; /***** Prototypes for raylink functions **************************************/ static int asc_to_int(char a); @@ -373,11 +371,12 @@ static dev_link_t *ray_attach(void) dev->hard_start_xmit = &ray_dev_start_xmit; dev->set_config = &ray_dev_config; dev->get_stats = &ray_get_stats; - dev->do_ioctl = &ray_dev_ioctl; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); -#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ - dev->get_wireless_stats = ray_get_wireless_stats; -#endif + dev->wireless_handlers = &ray_handler_def; +#ifdef WIRELESS_SPY + local->wireless_data.spy_data = &local->spy_data; + dev->wireless_data = &local->wireless_data; +#endif /* WIRELESS_SPY */ dev->set_multicast_list = &set_multicast_list; @@ -1201,436 +1200,420 @@ static struct ethtool_ops netdev_ethtool_ops = { /*====================================================================*/ -static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get protocol name + */ +static int ray_get_name(struct net_device *dev, + struct iw_request_info *info, + char *cwrq, + char *extra) { - ray_dev_t *local = (ray_dev_t *)dev->priv; - dev_link_t *link = local->finder; - int err = 0; -#if WIRELESS_EXT > 7 - struct iwreq *wrq = (struct iwreq *) ifr; -#endif /* WIRELESS_EXT > 7 */ -#ifdef WIRELESS_SPY - struct sockaddr address[IW_MAX_SPY]; -#endif /* WIRELESS_SPY */ + strcpy(cwrq, "IEEE 802.11-FH"); + return 0; +} - if (!(link->state & DEV_PRESENT)) { - DEBUG(2,"ray_dev_ioctl - device not present\n"); - return -1; - } - DEBUG(2,"ray_cs IOCTL dev=%p, ifr=%p, cmd = 0x%x\n",dev,ifr,cmd); - /* Validate the command */ - switch (cmd) - { -#if WIRELESS_EXT > 7 - /* --------------- WIRELESS EXTENSIONS --------------- */ - /* Get name */ - case SIOCGIWNAME: - strcpy(wrq->u.name, "IEEE 802.11-FH"); - break; - - /* Get frequency/channel */ - case SIOCGIWFREQ: - wrq->u.freq.m = local->sparm.b5.a_hop_pattern; - wrq->u.freq.e = 0; - break; - - /* Set frequency/channel */ - case SIOCSIWFREQ: - /* Reject if card is already initialised */ - if(local->card_status != CARD_AWAITING_PARAM) - { - err = -EBUSY; - break; - } +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set frequency + */ +static int ray_set_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + int err = -EINPROGRESS; /* Call commit handler */ - /* Setting by channel number */ - if ((wrq->u.freq.m > USA_HOP_MOD) || (wrq->u.freq.e > 0)) - err = -EOPNOTSUPP; - else - local->sparm.b5.a_hop_pattern = wrq->u.freq.m; - break; + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; - /* Get current network name (ESSID) */ - case SIOCGIWESSID: - if (wrq->u.data.pointer) - { - char essid[IW_ESSID_MAX_SIZE + 1]; - /* Get the essid that was set */ - memcpy(essid, local->sparm.b5.a_current_ess_id, - IW_ESSID_MAX_SIZE); - essid[IW_ESSID_MAX_SIZE] = '\0'; - - /* Push it out ! */ - wrq->u.data.length = strlen(essid) + 1; - wrq->u.data.flags = 1; /* active */ - if (copy_to_user(wrq->u.data.pointer, essid, sizeof(essid))) - err = -EFAULT; - } - break; + /* Setting by channel number */ + if ((fwrq->m > USA_HOP_MOD) || (fwrq->e > 0)) + err = -EOPNOTSUPP; + else + local->sparm.b5.a_hop_pattern = fwrq->m; - /* Set desired network name (ESSID) */ - case SIOCSIWESSID: - /* Reject if card is already initialised */ - if(local->card_status != CARD_AWAITING_PARAM) - { - err = -EBUSY; - break; - } + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get frequency + */ +static int ray_get_freq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *fwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; - if (wrq->u.data.pointer) - { - char card_essid[IW_ESSID_MAX_SIZE + 1]; - - /* Check if we asked for `any' */ - if(wrq->u.data.flags == 0) - { + fwrq->m = local->sparm.b5.a_hop_pattern; + fwrq->e = 0; + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set ESSID + */ +static int ray_set_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; + + /* Check if we asked for `any' */ + if(dwrq->flags == 0) { /* Corey : can you do that ? */ - err = -EOPNOTSUPP; - } - else - { + return -EOPNOTSUPP; + } else { /* Check the size of the string */ - if(wrq->u.data.length > - IW_ESSID_MAX_SIZE + 1) - { - err = -E2BIG; - break; - } - if (copy_from_user(card_essid, - wrq->u.data.pointer, - wrq->u.data.length)) { - err = -EFAULT; - break; + if(dwrq->length > IW_ESSID_MAX_SIZE + 1) { + return -E2BIG; } - card_essid[IW_ESSID_MAX_SIZE] = '\0'; /* Set the ESSID in the card */ - memcpy(local->sparm.b5.a_current_ess_id, card_essid, - IW_ESSID_MAX_SIZE); - } + memset(local->sparm.b5.a_current_ess_id, 0, IW_ESSID_MAX_SIZE); + memcpy(local->sparm.b5.a_current_ess_id, extra, dwrq->length); } - break; - - /* Get current Access Point (BSSID in our case) */ - case SIOCGIWAP: - memcpy(wrq->u.ap_addr.sa_data, local->bss_id, ETH_ALEN); - wrq->u.ap_addr.sa_family = ARPHRD_ETHER; - break; - - /* Get the current bit-rate */ - case SIOCGIWRATE: - if(local->net_default_tx_rate == 3) - wrq->u.bitrate.value = 2000000; /* Hum... */ - else - wrq->u.bitrate.value = local->net_default_tx_rate * 500000; - wrq->u.bitrate.fixed = 0; /* We are in auto mode */ - break; - - /* Set the desired bit-rate */ - case SIOCSIWRATE: - /* Check if rate is in range */ - if((wrq->u.bitrate.value != 1000000) && - (wrq->u.bitrate.value != 2000000)) - { - err = -EINVAL; - break; - } - /* Hack for 1.5 Mb/s instead of 2 Mb/s */ - if((local->fw_ver == 0x55) && /* Please check */ - (wrq->u.bitrate.value == 2000000)) - local->net_default_tx_rate = 3; - else - local->net_default_tx_rate = wrq->u.bitrate.value/500000; - break; - - /* Get the current RTS threshold */ - case SIOCGIWRTS: - wrq->u.rts.value = (local->sparm.b5.a_rts_threshold[0] << 8) - + local->sparm.b5.a_rts_threshold[1]; -#if WIRELESS_EXT > 8 - wrq->u.rts.disabled = (wrq->u.rts.value == 32767); -#endif /* WIRELESS_EXT > 8 */ - wrq->u.rts.fixed = 1; - break; - - /* Set the desired RTS threshold */ - case SIOCSIWRTS: - { - int rthr = wrq->u.rts.value; - /* Reject if card is already initialised */ - if(local->card_status != CARD_AWAITING_PARAM) - { - err = -EBUSY; - break; - } + return -EINPROGRESS; /* Call commit handler */ +} - /* if(wrq->u.rts.fixed == 0) we should complain */ -#if WIRELESS_EXT > 8 - if(wrq->u.rts.disabled) - rthr = 32767; +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get ESSID + */ +static int ray_get_essid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + /* Get the essid that was set */ + memcpy(extra, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); + extra[IW_ESSID_MAX_SIZE] = '\0'; + + /* Push it out ! */ + dwrq->length = strlen(extra) + 1; + dwrq->flags = 1; /* active */ + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get AP address + */ +static int ray_get_wap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *awrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + memcpy(awrq->sa_data, local->bss_id, ETH_ALEN); + awrq->sa_family = ARPHRD_ETHER; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Bit-Rate + */ +static int ray_set_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; + + /* Check if rate is in range */ + if((vwrq->value != 1000000) && (vwrq->value != 2000000)) + return -EINVAL; + + /* Hack for 1.5 Mb/s instead of 2 Mb/s */ + if((local->fw_ver == 0x55) && /* Please check */ + (vwrq->value == 2000000)) + local->net_default_tx_rate = 3; else -#endif /* WIRELESS_EXT > 8 */ - if((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */ - { - err = -EINVAL; - break; - } + local->net_default_tx_rate = vwrq->value/500000; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Bit-Rate + */ +static int ray_get_rate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + if(local->net_default_tx_rate == 3) + vwrq->value = 2000000; /* Hum... */ + else + vwrq->value = local->net_default_tx_rate * 500000; + vwrq->fixed = 0; /* We are in auto mode */ + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set RTS threshold + */ +static int ray_set_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + int rthr = vwrq->value; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; + + /* if(wrq->u.rts.fixed == 0) we should complain */ + if(vwrq->disabled) + rthr = 32767; + else { + if((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */ + return -EINVAL; + } local->sparm.b5.a_rts_threshold[0] = (rthr >> 8) & 0xFF; local->sparm.b5.a_rts_threshold[1] = rthr & 0xFF; - } - break; - /* Get the current fragmentation threshold */ - case SIOCGIWFRAG: - wrq->u.frag.value = (local->sparm.b5.a_frag_threshold[0] << 8) - + local->sparm.b5.a_frag_threshold[1]; -#if WIRELESS_EXT > 8 - wrq->u.frag.disabled = (wrq->u.frag.value == 32767); -#endif /* WIRELESS_EXT > 8 */ - wrq->u.frag.fixed = 1; - break; + return -EINPROGRESS; /* Call commit handler */ +} - /* Set the desired fragmentation threshold */ - case SIOCSIWFRAG: - { - int fthr = wrq->u.frag.value; - /* Reject if card is already initialised */ - if(local->card_status != CARD_AWAITING_PARAM) - { - err = -EBUSY; - break; - } +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get RTS threshold + */ +static int ray_get_rts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + + vwrq->value = (local->sparm.b5.a_rts_threshold[0] << 8) + + local->sparm.b5.a_rts_threshold[1]; + vwrq->disabled = (vwrq->value == 32767); + vwrq->fixed = 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Fragmentation threshold + */ +static int ray_set_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + int fthr = vwrq->value; + + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; /* if(wrq->u.frag.fixed == 0) should complain */ -#if WIRELESS_EXT > 8 - if(wrq->u.frag.disabled) - fthr = 32767; - else -#endif /* WIRELESS_EXT > 8 */ - if((fthr < 256) || (fthr > 2347)) /* To check out ! */ - { - err = -EINVAL; - break; - } + if(vwrq->disabled) + fthr = 32767; + else { + if((fthr < 256) || (fthr > 2347)) /* To check out ! */ + return -EINVAL; + } local->sparm.b5.a_frag_threshold[0] = (fthr >> 8) & 0xFF; local->sparm.b5.a_frag_threshold[1] = fthr & 0xFF; - } - break; -#endif /* WIRELESS_EXT > 7 */ -#if WIRELESS_EXT > 8 + return -EINPROGRESS; /* Call commit handler */ +} - /* Get the current mode of operation */ - case SIOCGIWMODE: - if(local->sparm.b5.a_network_type) - wrq->u.mode = IW_MODE_INFRA; - else - wrq->u.mode = IW_MODE_ADHOC; - break; +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Fragmentation threshold + */ +static int ray_get_frag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *vwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; - /* Set the current mode of operation */ - case SIOCSIWMODE: - { + vwrq->value = (local->sparm.b5.a_frag_threshold[0] << 8) + + local->sparm.b5.a_frag_threshold[1]; + vwrq->disabled = (vwrq->value == 32767); + vwrq->fixed = 1; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : set Mode of Operation + */ +static int ray_set_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; + int err = -EINPROGRESS; /* Call commit handler */ char card_mode = 1; - - /* Reject if card is already initialised */ - if(local->card_status != CARD_AWAITING_PARAM) - { - err = -EBUSY; - break; - } - switch (wrq->u.mode) + /* Reject if card is already initialised */ + if(local->card_status != CARD_AWAITING_PARAM) + return -EBUSY; + + switch (*uwrq) { case IW_MODE_ADHOC: - card_mode = 0; - // Fall through + card_mode = 0; + // Fall through case IW_MODE_INFRA: - local->sparm.b5.a_network_type = card_mode; - break; + local->sparm.b5.a_network_type = card_mode; + break; default: - err = -EINVAL; + err = -EINVAL; } - } - break; -#endif /* WIRELESS_EXT > 8 */ -#if WIRELESS_EXT > 7 - /* ------------------ IWSPY SUPPORT ------------------ */ - /* Define the range (variations) of above parameters */ - case SIOCGIWRANGE: - /* Basic checking... */ - if(wrq->u.data.pointer != (caddr_t) 0) - { - struct iw_range range; - memset((char *) &range, 0, sizeof(struct iw_range)); - - /* Set the length (very important for backward compatibility) */ - wrq->u.data.length = sizeof(struct iw_range); - -#if WIRELESS_EXT > 10 - /* Set the Wireless Extension versions */ - range.we_version_compiled = WIRELESS_EXT; - range.we_version_source = 9; -#endif /* WIRELESS_EXT > 10 */ - - /* Set information in the range struct */ - range.throughput = 1.1 * 1000 * 1000; /* Put the right number here */ - range.num_channels = hop_pattern_length[(int)country]; - range.num_frequency = 0; - range.max_qual.qual = 0; - range.max_qual.level = 255; /* What's the correct value ? */ - range.max_qual.noise = 255; /* Idem */ - range.num_bitrates = 2; - range.bitrate[0] = 1000000; /* 1 Mb/s */ - range.bitrate[1] = 2000000; /* 2 Mb/s */ - - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, &range, - sizeof(struct iw_range))) - err = -EFAULT; - } - break; + return err; +} -#ifdef WIRELESS_SPY - /* Set addresses to spy */ - case SIOCSIWSPY: - /* Check the number of addresses */ - if(wrq->u.data.length > IW_MAX_SPY) - { - err = -E2BIG; - break; - } - local->spy_number = wrq->u.data.length; +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get Mode of Operation + */ +static int ray_get_mode(struct net_device *dev, + struct iw_request_info *info, + __u32 *uwrq, + char *extra) +{ + ray_dev_t *local = (ray_dev_t *)dev->priv; - /* If there is some addresses to copy */ - if(local->spy_number > 0) - { - int i; - - /* Copy addresses to the driver */ - if(copy_from_user(address, wrq->u.data.pointer, - sizeof(struct sockaddr) * local->spy_number)) - { - err = -EFAULT; - break; - } - - /* Copy addresses to the lp structure */ - for(i = 0; i < local->spy_number; i++) - memcpy(local->spy_address[i], address[i].sa_data, ETH_ALEN); - - /* Reset structure... */ - memset(local->spy_stat, 0x00, sizeof(iw_qual) * IW_MAX_SPY); - -#ifdef DEBUG_IOCTL_INFO - printk(KERN_DEBUG "SetSpy - Set of new addresses is :\n"); - for(i = 0; i < local->spy_number; i++) - printk(KERN_DEBUG "%02X:%02X:%02X:%02X:%02X:%02X\n", - local->spy_address[i][0], - local->spy_address[i][1], - local->spy_address[i][2], - local->spy_address[i][3], - local->spy_address[i][4], - local->spy_address[i][5]); -#endif /* DEBUG_IOCTL_INFO */ - } - break; + if(local->sparm.b5.a_network_type) + *uwrq = IW_MODE_INFRA; + else + *uwrq = IW_MODE_ADHOC; - /* Get the spy list and spy stats */ - case SIOCGIWSPY: - /* Set the number of addresses */ - wrq->u.data.length = local->spy_number; + return 0; +} - /* If the user want to have the addresses back... */ - if((local->spy_number > 0) && (wrq->u.data.pointer != (caddr_t) 0)) - { - int i; - - /* Copy addresses from the lp structure */ - for(i = 0; i < local->spy_number; i++) - { - memcpy(address[i].sa_data, local->spy_address[i], ETH_ALEN); - address[i].sa_family = ARPHRD_ETHER; - } - - /* Copy addresses to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, address, - sizeof(struct sockaddr) * local->spy_number)) - { - err = -EFAULT; - break; - } - - /* Copy stats to the user buffer (just after) */ - if(copy_to_user(wrq->u.data.pointer + - (sizeof(struct sockaddr) * local->spy_number), - local->spy_stat, sizeof(iw_qual) * local->spy_number)) - { - err = -EFAULT; - break; - } - - /* Reset updated flags */ - for(i = 0; i < local->spy_number; i++) - local->spy_stat[i].updated = 0x0; - } /* if(pointer != NULL) */ - - break; -#endif /* WIRELESS_SPY */ +/*------------------------------------------------------------------*/ +/* + * Wireless Handler : get range info + */ +static int ray_get_range(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + struct iw_range *range = (struct iw_range *) extra; + + memset((char *) range, 0, sizeof(struct iw_range)); + + /* Set the length (very important for backward compatibility) */ + dwrq->length = sizeof(struct iw_range); + + /* Set the Wireless Extension versions */ + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 9; + + /* Set information in the range struct */ + range->throughput = 1.1 * 1000 * 1000; /* Put the right number here */ + range->num_channels = hop_pattern_length[(int)country]; + range->num_frequency = 0; + range->max_qual.qual = 0; + range->max_qual.level = 255; /* What's the correct value ? */ + range->max_qual.noise = 255; /* Idem */ + range->num_bitrates = 2; + range->bitrate[0] = 1000000; /* 1 Mb/s */ + range->bitrate[1] = 2000000; /* 2 Mb/s */ + return 0; +} - /* ------------------ PRIVATE IOCTL ------------------ */ -#ifndef SIOCIWFIRSTPRIV -#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE -#endif /* SIOCIWFIRSTPRIV */ -#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ -#define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */ -#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ - case SIOCSIPFRAMING: - if(!capable(CAP_NET_ADMIN)) /* For private IOCTLs, we need to check permissions */ - { - err = -EPERM; - break; - } - translate = *(wrq->u.name); /* Set framing mode */ - break; - case SIOCGIPFRAMING: - *(wrq->u.name) = translate; - break; - case SIOCGIPCOUNTRY: - *(wrq->u.name) = country; - break; - case SIOCGIWPRIV: - /* Export our "private" intercace */ - if(wrq->u.data.pointer != (caddr_t) 0) - { - struct iw_priv_args priv[] = - { /* cmd, set_args, get_args, name */ - { SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "set_framing" }, - { SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_framing" }, - { SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_country" }, - }; - /* Set the number of ioctl available */ - wrq->u.data.length = 3; - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, (u_char *) priv, - sizeof(priv))) - err = -EFAULT; - } - break; -#endif /* WIRELESS_EXT > 7 */ +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : set framing mode + */ +static int ray_set_framing(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + translate = *(extra); /* Set framing mode */ + return 0; +} - default: - DEBUG(0,"ray_dev_ioctl cmd = 0x%x\n", cmd); - err = -EOPNOTSUPP; - } - return err; -} /* end ray_dev_ioctl */ -/*===========================================================================*/ -#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */ +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get framing mode + */ +static int ray_get_framing(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + *(extra) = translate; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Wireless Private Handler : get country + */ +static int ray_get_country(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + *(extra) = country; + + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Commit handler : called after a bunch of SET operations + */ +static int ray_commit(struct net_device *dev, + struct iw_request_info *info, /* NULL */ + void *zwrq, /* NULL */ + char *extra) /* NULL */ +{ + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Stats handler : return Wireless Stats + */ static iw_stats * ray_get_wireless_stats(struct net_device * dev) { ray_dev_t * local = (ray_dev_t *) dev->priv; @@ -1642,13 +1625,13 @@ static iw_stats * ray_get_wireless_stats(struct net_device * dev) local->wstats.status = local->card_status; #ifdef WIRELESS_SPY - if((local->spy_number > 0) && (local->sparm.b5.a_network_type == 0)) + if((local->spy_data.spy_number > 0) && (local->sparm.b5.a_network_type == 0)) { /* Get it from the first node in spy list */ - local->wstats.qual.qual = local->spy_stat[0].qual; - local->wstats.qual.level = local->spy_stat[0].level; - local->wstats.qual.noise = local->spy_stat[0].noise; - local->wstats.qual.updated = local->spy_stat[0].updated; + local->wstats.qual.qual = local->spy_data.spy_stat[0].qual; + local->wstats.qual.level = local->spy_data.spy_stat[0].level; + local->wstats.qual.noise = local->spy_data.spy_stat[0].noise; + local->wstats.qual.updated = local->spy_data.spy_stat[0].updated; } #endif /* WIRELESS_SPY */ @@ -1659,7 +1642,65 @@ static iw_stats * ray_get_wireless_stats(struct net_device * dev) return &local->wstats; } /* end ray_get_wireless_stats */ -#endif /* WIRELESS_EXT > 7 */ + +/*------------------------------------------------------------------*/ +/* + * Structures to export the Wireless Handlers + */ + +static const iw_handler ray_handler[] = { + [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) ray_commit, + [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) ray_get_name, + [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) ray_set_freq, + [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) ray_get_freq, + [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) ray_set_mode, + [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) ray_get_mode, + [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) ray_get_range, +#ifdef WIRELESS_SPY + [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_set_spy, + [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_get_spy, + [SIOCSIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_set_thrspy, + [SIOCGIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_get_thrspy, +#endif /* WIRELESS_SPY */ + [SIOCGIWAP -SIOCIWFIRST] (iw_handler) ray_get_wap, + [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) ray_set_essid, + [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) ray_get_essid, + [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) ray_set_rate, + [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) ray_get_rate, + [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) ray_set_rts, + [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) ray_get_rts, + [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) ray_set_frag, + [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) ray_get_frag, +}; + +#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ +#define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */ +#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ + +static const iw_handler ray_private_handler[] = { + [0] (iw_handler) ray_set_framing, + [1] (iw_handler) ray_get_framing, + [3] (iw_handler) ray_get_country, +}; + +static const struct iw_priv_args ray_private_args[] = { +/* cmd, set_args, get_args, name */ +{ SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "set_framing" }, +{ SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_framing" }, +{ SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_country" }, +}; + +static const struct iw_handler_def ray_handler_def = +{ + .num_standard = sizeof(ray_handler)/sizeof(iw_handler), + .num_private = sizeof(ray_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(ray_private_args)/sizeof(struct iw_priv_args), + .standard = ray_handler, + .private = ray_private_handler, + .private_args = ray_private_args, + .get_wireless_stats = ray_get_wireless_stats, +}; + /*===========================================================================*/ static int ray_open(struct net_device *dev) { @@ -2392,20 +2433,15 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned i /*local->wstats.qual.noise = none ? */ local->wstats.qual.updated = 0x2; } - /* Now, for the addresses in the spy list */ + /* Now, update the spy stuff */ { - int i; - /* Look all addresses */ - for(i = 0; i < local->spy_number; i++) - /* If match */ - if(!memcmp(linksrcaddr, local->spy_address[i], ETH_ALEN)) - { - /* Update statistics */ - /*local->spy_stat[i].qual = none ? */ - local->spy_stat[i].level = siglev; - /*local->spy_stat[i].noise = none ? */ - local->spy_stat[i].updated = 0x2; - } + struct iw_quality wstats; + wstats.level = siglev; + /* wstats.noise = none ? */ + /* wstats.qual = none ? */ + wstats.updated = 0x2; + /* Update spy records */ + wireless_spy_update(dev, linksrcaddr, &wstats); } #endif /* WIRELESS_SPY */ } /* end rx_data */ diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h index c77afa14fa8..42660fe64bf 100644 --- a/drivers/net/wireless/ray_cs.h +++ b/drivers/net/wireless/ray_cs.h @@ -63,13 +63,10 @@ typedef struct ray_dev_t { UCHAR last_rsl; int beacon_rxed; struct beacon_rx last_bcn; -#ifdef WIRELESS_EXT iw_stats wstats; /* Wireless specific stats */ -#endif #ifdef WIRELESS_SPY - int spy_number; /* Number of addresses to spy */ - mac_addr spy_address[IW_MAX_SPY + 1]; /* The addresses to spy */ - iw_qual spy_stat[IW_MAX_SPY + 1]; /* Statistics gathered */ + struct iw_spy_data spy_data; + struct iw_public_data wireless_data; #endif /* WIRELESS_SPY */ } ray_dev_t; diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c new file mode 100644 index 00000000000..39c6cdf7f3f --- /dev/null +++ b/drivers/net/wireless/spectrum_cs.c @@ -0,0 +1,1120 @@ +/* + * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as + * Symbol Wireless Networker LA4100, CompactFlash cards by Socket + * Communications and Intel PRO/Wireless 2011B. + * + * The driver implements Symbol firmware download. The rest is handled + * in hermes.c and orinoco.c. + * + * Utilities for downloading the Symbol firmware are available at + * http://sourceforge.net/projects/orinoco/ + * + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on orinoco_cs.c: + * Copyright (C) David Gibson, Linuxcare Australia + * Portions based on Spectrum24tDnld.c from original spectrum24 driver: + * Copyright (C) Symbol Technologies. + * + * See copyright notice in file orinoco.c. + */ + +#define DRIVER_NAME "spectrum_cs" +#define PFX DRIVER_NAME ": " + +#include <linux/config.h> +#ifdef __IN_PCMCIA_PACKAGE__ +#include <pcmcia/k_compat.h> +#endif /* __IN_PCMCIA_PACKAGE__ */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include "orinoco.h" + +/* + * If SPECTRUM_FW_INCLUDED is defined, the firmware is hardcoded into + * the driver. Use get_symbol_fw script to generate spectrum_fw.h and + * copy it to the same directory as spectrum_cs.c. + * + * If SPECTRUM_FW_INCLUDED is not defined, the firmware is loaded at the + * runtime using hotplug. Use the same get_symbol_fw script to generate + * files symbol_sp24t_prim_fw symbol_sp24t_sec_fw, copy them to the + * hotplug firmware directory (typically /usr/lib/hotplug/firmware) and + * make sure that you have hotplug installed and enabled in the kernel. + */ +/* #define SPECTRUM_FW_INCLUDED 1 */ + +#ifdef SPECTRUM_FW_INCLUDED +/* Header with the firmware */ +#include "spectrum_fw.h" +#else /* !SPECTRUM_FW_INCLUDED */ +#include <linux/firmware.h> +static unsigned char *primsym; +static unsigned char *secsym; +static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; +static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; +#endif /* !SPECTRUM_FW_INCLUDED */ + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); +MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Magic constants */ +/********************************************************************/ + +/* + * The dev_info variable is the "key" that is used to match up this + * device driver with appropriate cards, through the card + * configuration database. + */ +static dev_info_t dev_info = DRIVER_NAME; + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + dev_link_t link; + dev_node_t node; +}; + +/* + * A linked list of "instances" of the device. Each actual PCMCIA + * card corresponds to one device instance, and is described by one + * dev_link_t structure (defined in ds.h). + */ +static dev_link_t *dev_list; /* = NULL */ + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +/* device methods */ +static int spectrum_cs_hard_reset(struct orinoco_private *priv); + +/* PCMCIA gumpf */ +static void spectrum_cs_config(dev_link_t * link); +static void spectrum_cs_release(dev_link_t * link); +static int spectrum_cs_event(event_t event, int priority, + event_callback_args_t * args); + +static dev_link_t *spectrum_cs_attach(void); +static void spectrum_cs_detach(dev_link_t *); + +/********************************************************************/ +/* Firmware downloader */ +/********************************************************************/ + +/* Position of PDA in the adapter memory */ +#define EEPROM_ADDR 0x3000 +#define EEPROM_LEN 0x200 +#define PDA_OFFSET 0x100 + +#define PDA_ADDR (EEPROM_ADDR + PDA_OFFSET) +#define PDA_WORDS ((EEPROM_LEN - PDA_OFFSET) / 2) + +/* Constants for the CISREG_CCSR register */ +#define HCR_RUN 0x07 /* run firmware after reset */ +#define HCR_IDLE 0x0E /* don't run firmware after reset */ +#define HCR_MEM16 0x10 /* memory width bit, should be preserved */ + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* End markers */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + u32 _addr; /* adapter address where to write the block */ + u16 _len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __attribute__ ((packed)); + +/* + * Plug Data References are located in in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + u32 _id; /* record ID */ + u32 _addr; /* adapter address where to write the data */ + u32 _len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __attribute__ ((packed)); + + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + u16 _len; /* length of ID and data, in words */ + u16 _id; /* record ID */ + char data[0]; /* plug data */ +} __attribute__ ((packed));; + + +/* Functions for access to little-endian data */ +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->_addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->_len); +} + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->_id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->_addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->_len); +} + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->_id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->_len) - 1); +} + + +/* Set address of the auxiliary port */ +static inline void +spectrum_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + + +/* Open access to the auxiliary port */ +static int +spectrum_aux_open(hermes_t *hw) +{ + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + HERMES_AUX_ENABLED) + return 0; + } + + return -EBUSY; +} + + +#define CS_CHECK(fn, ret) \ + do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/* + * Reset the card using configuration registers COR and CCSR. + * If IDLE is 1, stop the firmware, so that it can be safely rewritten. + */ +static int +spectrum_reset(dev_link_t *link, int idle) +{ + int last_ret, last_fn; + conf_reg_t reg; + u_int save_cor; + + /* Doing it if hardware is gone is guaranteed crash */ + if (!(link->state & DEV_CONFIG)) + return -ENODEV; + + /* Save original COR value */ + reg.Function = 0; + reg.Action = CS_READ; + reg.Offset = CISREG_COR; + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link->handle, ®)); + save_cor = reg.Value; + + /* Soft-Reset card */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = (save_cor | COR_SOFT_RESET); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link->handle, ®)); + udelay(1000); + + /* Read CCSR */ + reg.Action = CS_READ; + reg.Offset = CISREG_CCSR; + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link->handle, ®)); + + /* + * Start or stop the firmware. Memory width bit should be + * preserved from the value we've just read. + */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_CCSR; + reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link->handle, ®)); + udelay(1000); + + /* Restore original COR configuration index */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = (save_cor & ~COR_SOFT_RESET); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link->handle, ®)); + udelay(1000); + return 0; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + return -ENODEV; +} + + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static struct pdr * +spectrum_find_pdr(struct pdr *first_pdr, u32 record_id) +{ + struct pdr *pdr = first_pdr; + + while (pdr_id(pdr) != PDI_END) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) +{ + struct pdr *pdr; + + /* Find the PDI corresponding to this PDR */ + pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi)); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + spectrum_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_words(hw, HERMES_AUXDATA, pdi->data, + pdi_len(pdi) / 2); + + return 0; +} + + +/* Read PDA from the adapter */ +static int +spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len) +{ + int ret; + int pda_size; + + /* Issue command to read EEPROM */ + ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + + /* Open auxiliary port */ + ret = spectrum_aux_open(hw); + if (ret) + return ret; + + /* read PDA from EEPROM */ + spectrum_aux_setaddr(hw, PDA_ADDR); + hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} + + +/* Parse PDA and write the records into the adapter */ +static int +spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, + u16 *pda) +{ + int ret; + struct pdi *pdi; + struct pdr *first_pdr; + const struct dblock *blk = first_block; + + /* Skip all blocks to locate Plug Data References */ + while (dblock_addr(blk) != BLOCK_END) + blk = (struct dblock *) &blk->data[dblock_len(blk)]; + + first_pdr = (struct pdr *) blk; + + /* Go through every PDI and plug them into the adapter */ + pdi = (struct pdi *) (pda + 2); + while (pdi_id(pdi) != PDI_END) { + ret = spectrum_plug_pdi(hw, first_pdr, pdi); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} + + +/* Load firmware blocks into the adapter */ +static int +spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; + + blk = first_block; + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while (dblock_addr(blk) != BLOCK_END) { + spectrum_aux_setaddr(hw, blkaddr); + hermes_write_words(hw, HERMES_AUXDATA, blk->data, + blklen / 2); + + blk = (struct dblock *) &blk->data[blklen]; + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return 0; +} + + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +spectrum_dl_image(hermes_t *hw, dev_link_t *link, + const unsigned char *image) +{ + int ret; + const unsigned char *ptr; + const struct dblock *first_block; + + /* Plug Data Area (PDA) */ + u16 pda[PDA_WORDS]; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = (const struct dblock *) ptr; + + /* Read the PDA */ + if (image != primsym) { + ret = spectrum_read_pda(hw, pda, sizeof(pda)); + if (ret) + return ret; + } + + /* Stop the firmware, so that it can be safely rewritten */ + ret = spectrum_reset(link, 1); + if (ret) + return ret; + + /* Program the adapter with new firmware */ + ret = spectrum_load_blocks(hw, first_block); + if (ret) + return ret; + + /* Write the PDA to the adapter */ + if (image != primsym) { + ret = spectrum_apply_pda(hw, first_block, pda); + if (ret) + return ret; + } + + /* Run the firmware */ + ret = spectrum_reset(link, 0); + if (ret) + return ret; + + /* Reset hermes chip and make sure it responds */ + ret = hermes_init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (image != primsym && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +spectrum_dl_firmware(hermes_t *hw, dev_link_t *link) +{ + int ret; + client_handle_t handle = link->handle; + +#ifndef SPECTRUM_FW_INCLUDED + const struct firmware *fw_entry; + + if (request_firmware(&fw_entry, primary_fw_name, + &handle_to_dev(handle)) == 0) { + primsym = fw_entry->data; + } else { + printk(KERN_ERR PFX "Cannot find firmware: %s\n", + primary_fw_name); + return -ENOENT; + } + + if (request_firmware(&fw_entry, secondary_fw_name, + &handle_to_dev(handle)) == 0) { + secsym = fw_entry->data; + } else { + printk(KERN_ERR PFX "Cannot find firmware: %s\n", + secondary_fw_name); + return -ENOENT; + } +#endif + + /* Load primary firmware */ + ret = spectrum_dl_image(hw, link, primsym); + if (ret) { + printk(KERN_ERR PFX "Primary firmware download failed\n"); + return ret; + } + + /* Load secondary firmware */ + ret = spectrum_dl_image(hw, link, secsym); + + if (ret) { + printk(KERN_ERR PFX "Secondary firmware download failed\n"); + } + + return ret; +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +spectrum_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + dev_link_t *link = &card->link; + int err; + + if (!hermes_present(&priv->hw)) { + /* The firmware needs to be reloaded */ + if (spectrum_dl_firmware(&priv->hw, &card->link) != 0) { + printk(KERN_ERR PFX "Firmware download failed\n"); + err = -ENODEV; + } + } else { + /* Soft reset using COR and HCR */ + spectrum_reset(link, 0); + } + + return 0; +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +/* + * This creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a card + * insertion event. */ +static dev_link_t * +spectrum_cs_attach(void) +{ + struct net_device *dev; + struct orinoco_private *priv; + struct orinoco_pccard *card; + dev_link_t *link; + client_reg_t client_reg; + int ret; + + dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset); + if (! dev) + return NULL; + priv = netdev_priv(dev); + card = priv->card; + + /* Link both structures together */ + link = &card->link; + link->priv = dev; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = orinoco_interrupt; + link->irq.Instance = dev; + + /* General socket configuration defaults can go here. In this + * client, we assume very little, and rely on the CIS for + * almost everything. In most clients, many details (i.e., + * number, sizes, and attributes of IO windows) are fixed by + * the nature of the device, and can be hard-wired here. */ + link->conf.Attributes = 0; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + /* FIXME: need a lock? */ + link->next = dev_list; + dev_list = link; + + client_reg.dev_info = &dev_info; + client_reg.Version = 0x0210; /* FIXME: what does this mean? */ + client_reg.event_callback_args.client_data = link; + + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + spectrum_cs_detach(link); + return NULL; + } + + return link; +} /* spectrum_cs_attach */ + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void spectrum_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + struct net_device *dev = link->priv; + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + + BUG_ON(*linkp == NULL); + + if (link->state & DEV_CONFIG) + spectrum_cs_release(link); + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev); + if (link->dev) { + DEBUG(0, PFX "About to unregister net device %p\n", + dev); + unregister_netdev(dev); + } + free_orinocodev(dev); +} /* spectrum_cs_detach */ + +/* + * spectrum_cs_config() is scheduled to run after a CARD_INSERTION + * event is received, to configure the PCMCIA socket, and to make the + * device available to the system. + */ + +static void +spectrum_cs_config(dev_link_t *link) +{ + struct net_device *dev = link->priv; + client_handle_t handle = link->handle; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + hermes_t *hw = &priv->hw; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cisinfo_t info; + tuple_t tuple; + cisparse_t parse; + void __iomem *mem; + + CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info)); + + /* + * This reads the card's CONFIG tuple to find its + * configuration registers. + */ + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + cistpl_cftable_entry_t dflt = { .index = 0 }; + + if ( (pcmcia_get_tuple_data(handle, &tuple) != 0) + || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0)) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + dflt = *cfg; + if (cfg->index == 0) + goto next_entry; + link->conf.ConfigIndex = cfg->index; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); + if(!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = + (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = + IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = + IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = + io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = + link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + + + /* If we got this far, we're cool! */ + + break; + + next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + if (last_ret == CS_NO_MORE_ITEMS) { + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + goto cs_failed; + } + } + + /* + * Allocate an interrupt line. Note that this does not assign + * a handler to the interrupt, unless the 'Handler' member of + * the irq structure is initialized. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + if (!mem) + goto cs_failed; + + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + /* Ok, we have the configuration, prepare to register the netdev */ + dev->base_addr = link->io.BasePort1; + dev->irq = link->irq.AssignedIRQ; + SET_MODULE_OWNER(dev); + card->node.major = card->node.minor = 0; + + /* Reset card and download firmware */ + if (spectrum_cs_hard_reset(priv) != 0) { + goto failed; + } + + SET_NETDEV_DEV(dev, &handle_to_dev(handle)); + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + + /* At this point, the dev_node_t structure(s) needs to be + * initialized and arranged in a linked list at link->dev. */ + strcpy(card->node.dev_name, dev->name); + link->dev = &card->node; /* link->dev being non-NULL is also + used to indicate that the + net_device has been registered */ + link->state &= ~DEV_CONFIG_PENDING; + + /* Finally, report what we've done */ + printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d", + dev->name, link->conf.ConfigIndex, + link->conf.Vcc / 10, link->conf.Vcc % 10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1 / 10, + link->conf.Vpp1 % 10); + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 - 1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2 + link->io.NumPorts2 - 1); + printk("\n"); + + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + + failed: + spectrum_cs_release(link); +} /* spectrum_cs_config */ + +/* + * After a card is removed, spectrum_cs_release() will unregister the + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void +spectrum_cs_release(dev_link_t *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + spin_lock_irqsave(&priv->lock, flags); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Don't bother checking to see if these succeed or not */ + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* spectrum_cs_release */ + +/* + * The card status event handler. Mostly, this schedules other stuff + * to run after an event is received. + */ +static int +spectrum_cs_event(event_t event, int priority, + event_callback_args_t * args) +{ + dev_link_t *link = args->client_data; + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + netif_device_detach(dev); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + } + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + spectrum_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + /* Mark the device as stopped, to block IO until later */ + if (link->state & DEV_CONFIG) { + /* This is probably racy, but I can't think of + a better way, short of rewriting the PCMCIA + layer to not suck :-( */ + spin_lock_irqsave(&priv->lock, flags); + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: %s: Error %d downing interface\n", + dev->name, + event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL", + err); + + netif_device_detach(dev); + priv->hw_unavailable++; + + spin_unlock_irqrestore(&priv->lock, flags); + + pcmcia_release_configuration(link->handle); + } + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + /* FIXME: should we double check that this is + * the same card as we had before */ + pcmcia_request_configuration(link->handle, &link->conf); + netif_device_attach(dev); + priv->hw_unavailable--; + schedule_work(&priv->reset_work); + } + break; + } + + return err; +} /* spectrum_cs_event */ + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin <proski@gnu.org>," + " David Gibson <hermes@gibson.dropbear.id.au>, et al)"; + +static struct pcmcia_device_id spectrum_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4100 */ + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), /* Intel PRO/Wireless 2011B */ + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRIVER_NAME, + }, + .attach = spectrum_cs_attach, + .event = spectrum_cs_event, + .detach = spectrum_cs_detach, + .id_table = spectrum_cs_ids, +}; + +static int __init +init_spectrum_cs(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return pcmcia_register_driver(&orinoco_driver); +} + +static void __exit +exit_spectrum_cs(void) +{ + pcmcia_unregister_driver(&orinoco_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_spectrum_cs); +module_exit(exit_spectrum_cs); diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 6c42b573a95..4b0acae22b0 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -209,7 +209,7 @@ enum { NoStructure = 0, /* Really old firmware */ StructuredMessages = 1, /* Parsable AT response msgs */ ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */ -} FirmwareLevel; +}; struct strip { int magic; diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index f6130a53b79..183c4732ef6 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -59,6 +59,12 @@ /* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */ #include "wavelan_cs.p.h" /* Private header */ +#ifdef WAVELAN_ROAMING +static void wl_cell_expiry(unsigned long data); +static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp); +static void wv_nwid_filter(unsigned char mode, net_local *lp); +#endif /* WAVELAN_ROAMING */ + /************************* MISC SUBROUTINES **************************/ /* * Subroutines which won't fit in one of the following category @@ -500,9 +506,9 @@ fee_write(u_long base, /* i/o port of the card */ #ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */ -unsigned char WAVELAN_BEACON_ADDRESS[]= {0x09,0x00,0x0e,0x20,0x03,0x00}; +static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00}; -void wv_roam_init(struct net_device *dev) +static void wv_roam_init(struct net_device *dev) { net_local *lp= netdev_priv(dev); @@ -531,7 +537,7 @@ void wv_roam_init(struct net_device *dev) printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name); } -void wv_roam_cleanup(struct net_device *dev) +static void wv_roam_cleanup(struct net_device *dev) { wavepoint_history *ptr,*old_ptr; net_local *lp= netdev_priv(dev); @@ -550,7 +556,7 @@ void wv_roam_cleanup(struct net_device *dev) } /* Enable/Disable NWID promiscuous mode on a given device */ -void wv_nwid_filter(unsigned char mode, net_local *lp) +static void wv_nwid_filter(unsigned char mode, net_local *lp) { mm_t m; unsigned long flags; @@ -575,7 +581,7 @@ void wv_nwid_filter(unsigned char mode, net_local *lp) } /* Find a record in the WavePoint table matching a given NWID */ -wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) +static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) { wavepoint_history *ptr=lp->wavepoint_table.head; @@ -588,7 +594,7 @@ wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) } /* Create a new wavepoint table entry */ -wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp) +static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp) { wavepoint_history *new_wavepoint; @@ -624,7 +630,7 @@ wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_ } /* Remove a wavepoint entry from WavePoint table */ -void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) +static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) { if(wavepoint==NULL) return; @@ -646,7 +652,7 @@ void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) } /* Timer callback function - checks WavePoint table for stale entries */ -void wl_cell_expiry(unsigned long data) +static void wl_cell_expiry(unsigned long data) { net_local *lp=(net_local *)data; wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point; @@ -686,7 +692,7 @@ void wl_cell_expiry(unsigned long data) } /* Update SNR history of a wavepoint */ -void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq) +static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq) { int i=0,num_missed=0,ptr=0; int average_fast=0,average_slow=0; @@ -723,7 +729,7 @@ void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsi } /* Perform a handover to a new WavePoint */ -void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) +static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) { kio_addr_t base = lp->dev->base_addr; mm_t m; diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h index 29cff6daf86..fabc63ee153 100644 --- a/drivers/net/wireless/wavelan_cs.h +++ b/drivers/net/wireless/wavelan_cs.h @@ -62,7 +62,7 @@ * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this * part to accommodate your hardware... */ -const unsigned char MAC_ADDRESSES[][3] = +static const unsigned char MAC_ADDRESSES[][3] = { { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */ { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */ @@ -79,14 +79,14 @@ const unsigned char MAC_ADDRESSES[][3] = * (as read in the offset register of the dac area). * Used to map channel numbers used by `wfreqsel' to frequencies */ -const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, +static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, 0xD0, 0xF0, 0xF8, 0x150 }; /* Frequencies of the 1.0 modem (fixed frequencies). * Use to map the PSA `subband' to a frequency * Note : all frequencies apart from the first one need to be multiplied by 10 */ -const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; +static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; /*************************** PC INTERFACE ****************************/ diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h index 677ff71883c..01d882be879 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -647,23 +647,6 @@ struct net_local void __iomem *mem; }; -/**************************** PROTOTYPES ****************************/ - -#ifdef WAVELAN_ROAMING -/* ---------------------- ROAMING SUBROUTINES -----------------------*/ - -wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp); -wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp); -void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp); -void wl_cell_expiry(unsigned long data); -wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp); -void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq); -void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp); -void wv_nwid_filter(unsigned char mode, net_local *lp); -void wv_roam_init(struct net_device *dev); -void wv_roam_cleanup(struct net_device *dev); -#endif /* WAVELAN_ROAMING */ - /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ static inline u_char /* data */ hasr_read(u_long); /* Read the host interface : base address */ diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h index 8636d930678..7fcbe589c3f 100644 --- a/drivers/net/wireless/wl3501.h +++ b/drivers/net/wireless/wl3501.h @@ -2,7 +2,7 @@ #define __WL3501_H__ #include <linux/spinlock.h> -#include "ieee802_11.h" +#include <net/ieee80211.h> /* define for WLA 2.0 */ #define WL3501_BLKSZ 256 @@ -548,7 +548,7 @@ struct wl3501_80211_tx_plcp_hdr { struct wl3501_80211_tx_hdr { struct wl3501_80211_tx_plcp_hdr pclp_hdr; - struct ieee802_11_hdr mac_hdr; + struct ieee80211_hdr mac_hdr; } __attribute__ ((packed)); /* @@ -609,6 +609,7 @@ struct wl3501_card { struct net_device_stats stats; struct iw_statistics wstats; struct iw_spy_data spy_data; + struct iw_public_data wireless_data; struct dev_node_t node; }; #endif diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index dd902126d01..3f8c27f0871 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -296,7 +296,8 @@ static int wl3501_get_flash_mac_addr(struct wl3501_card *this) * * Move 'size' bytes from PC to card. (Shouldn't be interrupted) */ -void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, int size) +static void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, + int size) { /* switch to SRAM Page 0 */ wl3501_switch_page(this, (dest & 0x8000) ? WL3501_BSS_SPAGE1 : @@ -317,8 +318,8 @@ void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, int size) * * Move 'size' bytes from card to PC. (Shouldn't be interrupted) */ -void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, - int size) +static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, + int size) { /* switch to SRAM Page 0 */ wl3501_switch_page(this, (src & 0x8000) ? WL3501_BSS_SPAGE1 : @@ -1438,14 +1439,14 @@ fail: goto out; } -struct net_device_stats *wl3501_get_stats(struct net_device *dev) +static struct net_device_stats *wl3501_get_stats(struct net_device *dev) { struct wl3501_card *this = dev->priv; return &this->stats; } -struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev) +static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev) { struct wl3501_card *this = dev->priv; struct iw_statistics *wstats = &this->wstats; @@ -1943,7 +1944,7 @@ static const iw_handler wl3501_handler[] = { static const struct iw_handler_def wl3501_handler_def = { .num_standard = sizeof(wl3501_handler) / sizeof(iw_handler), .standard = (iw_handler *)wl3501_handler, - .spy_offset = offsetof(struct wl3501_card, spy_data), + .get_wireless_stats = wl3501_get_wireless_stats, }; /** @@ -1960,6 +1961,7 @@ static dev_link_t *wl3501_attach(void) client_reg_t client_reg; dev_link_t *link; struct net_device *dev; + struct wl3501_card *this; int ret; /* Initialize the dev_link_t structure */ @@ -1994,7 +1996,9 @@ static dev_link_t *wl3501_attach(void) dev->tx_timeout = wl3501_tx_timeout; dev->watchdog_timeo = 5 * HZ; dev->get_stats = wl3501_get_stats; - dev->get_wireless_stats = wl3501_get_wireless_stats; + this = dev->priv; + this->wireless_data.spy_data = &this->spy_data; + dev->wireless_data = &this->wireless_data; dev->wireless_handlers = (struct iw_handler_def *)&wl3501_handler_def; SET_ETHTOOL_OPS(dev, &ops); netif_stop_queue(dev); |