diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/qlge/qlge.h | 7 | ||||
| -rw-r--r-- | drivers/net/qlge/qlge_main.c | 266 |
2 files changed, 137 insertions, 136 deletions
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index ed5dbca01bd..a9845a2f243 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -1292,7 +1292,6 @@ struct rx_ring { u32 cpu; /* Which CPU this should run on. */ char name[IFNAMSIZ + 5]; struct napi_struct napi; - struct delayed_work rx_work; u8 reserved; struct ql_adapter *qdev; }; @@ -1366,6 +1365,7 @@ struct nic_stats { struct intr_context { struct ql_adapter *qdev; u32 intr; + u32 irq_mask; /* Mask of which rings the vector services. */ u32 hooked; u32 intr_en_mask; /* value/mask used to enable this intr */ u32 intr_dis_mask; /* value/mask used to disable this intr */ @@ -1486,11 +1486,11 @@ struct ql_adapter { struct intr_context intr_context[MAX_RX_RINGS]; int tx_ring_count; /* One per online CPU. */ - u32 rss_ring_count; /* One per online CPU. */ + u32 rss_ring_count; /* One per irq vector. */ /* * rx_ring_count = * (CPU count * outbound completion rx_ring) + - * (CPU count * inbound (RSS) completion rx_ring) + * (irq_vector_cnt * inbound (RSS) completion rx_ring) */ int rx_ring_count; int ring_mem_size; @@ -1517,7 +1517,6 @@ struct ql_adapter { union flash_params flash; struct net_device_stats stats; - struct workqueue_struct *q_workqueue; struct workqueue_struct *workqueue; struct delayed_work asic_reset_work; struct delayed_work mpi_reset_work; diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 0cbda4d47dc..8dd266befdc 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -1859,11 +1859,41 @@ static int ql_napi_poll_msix(struct napi_struct *napi, int budget) { struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi); struct ql_adapter *qdev = rx_ring->qdev; - int work_done = ql_clean_inbound_rx_ring(rx_ring, budget); + struct rx_ring *trx_ring; + int i, work_done = 0; + struct intr_context *ctx = &qdev->intr_context[rx_ring->cq_id]; QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n", rx_ring->cq_id); + /* Service the TX rings first. They start + * right after the RSS rings. */ + for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) { + trx_ring = &qdev->rx_ring[i]; + /* If this TX completion ring belongs to this vector and + * it's not empty then service it. + */ + if ((ctx->irq_mask & (1 << trx_ring->cq_id)) && + (ql_read_sh_reg(trx_ring->prod_idx_sh_reg) != + trx_ring->cnsmr_idx)) { + QPRINTK(qdev, INTR, DEBUG, + "%s: Servicing TX completion ring %d.\n", + __func__, trx_ring->cq_id); + ql_clean_outbound_rx_ring(trx_ring); + } + } + + /* + * Now service the RSS ring if it's active. + */ + if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != + rx_ring->cnsmr_idx) { + QPRINTK(qdev, INTR, DEBUG, + "%s: Servicing RX completion ring %d.\n", + __func__, rx_ring->cq_id); + work_done = ql_clean_inbound_rx_ring(rx_ring, budget); + } + if (work_done < budget) { napi_complete(napi); ql_enable_completion_interrupt(qdev, rx_ring->irq); @@ -1925,38 +1955,6 @@ static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) } -/* Worker thread to process a given rx_ring that is dedicated - * to outbound completions. - */ -static void ql_tx_clean(struct work_struct *work) -{ - struct rx_ring *rx_ring = - container_of(work, struct rx_ring, rx_work.work); - ql_clean_outbound_rx_ring(rx_ring); - ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); - -} - -/* Worker thread to process a given rx_ring that is dedicated - * to inbound completions. - */ -static void ql_rx_clean(struct work_struct *work) -{ - struct rx_ring *rx_ring = - container_of(work, struct rx_ring, rx_work.work); - ql_clean_inbound_rx_ring(rx_ring, 64); - ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); -} - -/* MSI-X Multiple Vector Interrupt Handler for outbound completions. */ -static irqreturn_t qlge_msix_tx_isr(int irq, void *dev_id) -{ - struct rx_ring *rx_ring = dev_id; - queue_delayed_work_on(rx_ring->cpu, rx_ring->qdev->q_workqueue, - &rx_ring->rx_work, 0); - return IRQ_HANDLED; -} - /* MSI-X Multiple Vector Interrupt Handler for inbound completions. */ static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id) { @@ -1976,7 +1974,6 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) struct ql_adapter *qdev = rx_ring->qdev; struct intr_context *intr_context = &qdev->intr_context[0]; u32 var; - int i; int work_done = 0; spin_lock(&qdev->hw_lock); @@ -2017,41 +2014,18 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) } /* - * Check the default queue and wake handler if active. + * Get the bit-mask that shows the active queues for this + * pass. Compare it to the queues that this irq services + * and call napi if there's a match. */ - rx_ring = &qdev->rx_ring[0]; - if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) { - QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n"); - ql_disable_completion_interrupt(qdev, intr_context->intr); - queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue, - &rx_ring->rx_work, 0); - work_done++; - } - - if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) { - /* - * Start the DPC for each active queue. - */ - for (i = 1; i < qdev->rx_ring_count; i++) { - rx_ring = &qdev->rx_ring[i]; - if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != - rx_ring->cnsmr_idx) { + var = ql_read32(qdev, ISR1); + if (var & intr_context->irq_mask) { QPRINTK(qdev, INTR, INFO, - "Waking handler for rx_ring[%d].\n", i); - ql_disable_completion_interrupt(qdev, - intr_context-> - intr); - if (i >= qdev->rss_ring_count) - queue_delayed_work_on(rx_ring->cpu, - qdev->q_workqueue, - &rx_ring->rx_work, - 0); - else + "Waking handler for rx_ring[0].\n"); + ql_disable_completion_interrupt(qdev, intr_context->intr); napi_schedule(&rx_ring->napi); work_done++; } - } - } ql_enable_completion_interrupt(qdev, intr_context->intr); return work_done ? IRQ_HANDLED : IRQ_NONE; } @@ -2703,35 +2677,9 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring) } switch (rx_ring->type) { case TX_Q: - /* If there's only one interrupt, then we use - * worker threads to process the outbound - * completion handling rx_rings. We do this so - * they can be run on multiple CPUs. There is - * room to play with this more where we would only - * run in a worker if there are more than x number - * of outbound completions on the queue and more - * than one queue active. Some threshold that - * would indicate a benefit in spite of the cost - * of a context switch. - * If there's more than one interrupt, then the - * outbound completions are processed in the ISR. - */ - if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) - INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); - else { - /* With all debug warnings on we see a WARN_ON message - * when we free the skb in the interrupt context. - */ - INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); - } cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs); cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames); break; - case DEFAULT_Q: - INIT_DELAYED_WORK(&rx_ring->rx_work, ql_rx_clean); - cqicb->irq_delay = 0; - cqicb->pkt_delay = 0; - break; case RX_Q: /* Inbound completion handling rx_rings run in * separate NAPI contexts. @@ -2878,6 +2826,71 @@ msi: QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n"); } +/* Each vector services 1 RSS ring and and 1 or more + * TX completion rings. This function loops through + * the TX completion rings and assigns the vector that + * will service it. An example would be if there are + * 2 vectors (so 2 RSS rings) and 8 TX completion rings. + * This would mean that vector 0 would service RSS ring 0 + * and TX competion rings 0,1,2 and 3. Vector 1 would + * service RSS ring 1 and TX completion rings 4,5,6 and 7. + */ +static void ql_set_tx_vect(struct ql_adapter *qdev) +{ + int i, j, vect; + u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count; + + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) { + /* Assign irq vectors to TX rx_rings.*/ + for (vect = 0, j = 0, i = qdev->rss_ring_count; + i < qdev->rx_ring_count; i++) { + if (j == tx_rings_per_vector) { + vect++; + j = 0; + } + qdev->rx_ring[i].irq = vect; + j++; + } + } else { + /* For single vector all rings have an irq + * of zero. + */ + for (i = 0; i < qdev->rx_ring_count; i++) + qdev->rx_ring[i].irq = 0; + } +} + +/* Set the interrupt mask for this vector. Each vector + * will service 1 RSS ring and 1 or more TX completion + * rings. This function sets up a bit mask per vector + * that indicates which rings it services. + */ +static void ql_set_irq_mask(struct ql_adapter *qdev, struct intr_context *ctx) +{ + int j, vect = ctx->intr; + u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count; + + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) { + /* Add the RSS ring serviced by this vector + * to the mask. + */ + ctx->irq_mask = (1 << qdev->rx_ring[vect].cq_id); + /* Add the TX ring(s) serviced by this vector + * to the mask. */ + for (j = 0; j < tx_rings_per_vector; j++) { + ctx->irq_mask |= + (1 << qdev->rx_ring[qdev->rss_ring_count + + (vect * tx_rings_per_vector) + j].cq_id); + } + } else { + /* For single vector we just shift each queue's + * ID into the mask. + */ + for (j = 0; j < qdev->rx_ring_count; j++) + ctx->irq_mask |= (1 << qdev->rx_ring[j].cq_id); + } +} + /* * Here we build the intr_context structures based on * our rx_ring count and intr vector count. @@ -2893,12 +2906,15 @@ static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev) /* Each rx_ring has it's * own intr_context since we have separate * vectors for each queue. - * This only true when MSI-X is enabled. */ for (i = 0; i < qdev->intr_count; i++, intr_context++) { qdev->rx_ring[i].irq = i; intr_context->intr = i; intr_context->qdev = qdev; + /* Set up this vector's bit-mask that indicates + * which queues it services. + */ + ql_set_irq_mask(qdev, intr_context); /* * We set up each vectors enable/disable/read bits so * there's no bit/mask calculations in the critical path. @@ -2915,20 +2931,21 @@ static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev) INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD | i; - - if (i < qdev->rss_ring_count) { - /* - * Inbound queues handle unicast frames only. + if (i == 0) { + /* The first vector/queue handles + * broadcast/multicast, fatal errors, + * and firmware events. This in addition + * to normal inbound NAPI processing. */ - intr_context->handler = qlge_msix_rx_isr; + intr_context->handler = qlge_isr; sprintf(intr_context->name, "%s-rx-%d", qdev->ndev->name, i); } else { /* - * Outbound queue is for outbound completions only. + * Inbound queues handle unicast frames only. */ - intr_context->handler = qlge_msix_tx_isr; - sprintf(intr_context->name, "%s-tx-%d", + intr_context->handler = qlge_msix_rx_isr; + sprintf(intr_context->name, "%s-rx-%d", qdev->ndev->name, i); } } @@ -2955,9 +2972,17 @@ static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev) */ intr_context->handler = qlge_isr; sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name); - for (i = 0; i < qdev->rx_ring_count; i++) - qdev->rx_ring[i].irq = 0; + /* Set up this vector's bit-mask that indicates + * which queues it services. In this case there is + * a single vector so it will service all RSS and + * TX completion rings. + */ + ql_set_irq_mask(qdev, intr_context); } + /* Tell the TX completion rings which MSIx vector + * they will be using. + */ + ql_set_tx_vect(qdev); } static void ql_free_irq(struct ql_adapter *qdev) @@ -3326,7 +3351,6 @@ static void ql_display_dev_info(struct net_device *ndev) static int ql_adapter_down(struct ql_adapter *qdev) { int i, status = 0; - struct rx_ring *rx_ring; ql_link_off(qdev); @@ -3340,27 +3364,8 @@ static int ql_adapter_down(struct ql_adapter *qdev) cancel_delayed_work_sync(&qdev->mpi_idc_work); cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); - /* The default queue at index 0 is always processed in - * a workqueue. - */ - cancel_delayed_work_sync(&qdev->rx_ring[0].rx_work); - - /* The rest of the rx_rings are processed in - * a workqueue only if it's a single interrupt - * environment (MSI/Legacy). - */ - for (i = 1; i < qdev->rx_ring_count; i++) { - rx_ring = &qdev->rx_ring[i]; - /* Only the RSS rings use NAPI on multi irq - * environment. Outbound completion processing - * is done in interrupt context. - */ - if (i <= qdev->rss_ring_count) { - napi_disable(&rx_ring->napi); - } else { - cancel_delayed_work_sync(&rx_ring->rx_work); - } - } + for (i = 0; i < qdev->rss_ring_count; i++) + napi_disable(&qdev->rx_ring[i].napi); clear_bit(QL_ADAPTER_UP, &qdev->flags); @@ -3476,9 +3481,9 @@ static int ql_configure_rings(struct ql_adapter *qdev) /* * The completion queue ID for the tx rings start - * immediately after the default Q ID, which is zero. + * immediately after the rss rings. */ - tx_ring->cq_id = i + qdev->rss_ring_count; + tx_ring->cq_id = qdev->rss_ring_count + i; } for (i = 0; i < qdev->rx_ring_count; i++) { @@ -3488,7 +3493,9 @@ static int ql_configure_rings(struct ql_adapter *qdev) rx_ring->cq_id = i; rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */ if (i < qdev->rss_ring_count) { - /* Inbound completions (RSS) queues */ + /* + * Inbound (RSS) queues. + */ rx_ring->cq_len = qdev->rx_ring_size; rx_ring->cq_size = rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); @@ -3804,10 +3811,7 @@ static void ql_release_all(struct pci_dev *pdev) destroy_workqueue(qdev->workqueue); qdev->workqueue = NULL; } - if (qdev->q_workqueue) { - destroy_workqueue(qdev->q_workqueue); - qdev->q_workqueue = NULL; - } + if (qdev->reg_base) iounmap(qdev->reg_base); if (qdev->doorbell_area) @@ -3920,8 +3924,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev, * Set up the operating parameters. */ qdev->rx_csum = 1; - - qdev->q_workqueue = create_workqueue(ndev->name); qdev->workqueue = create_singlethread_workqueue(ndev->name); INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work); INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work); |