diff options
Diffstat (limited to 'drivers/platform')
-rw-r--r-- | drivers/platform/x86/acerhdf.c | 12 | ||||
-rw-r--r-- | drivers/platform/x86/eeepc-laptop.c | 30 | ||||
-rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 26 |
3 files changed, 35 insertions, 33 deletions
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 0a8f735f6c4..ab64522aaa6 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.17" +#define DRV_VER "0.5.18" /* * According to the Atom N270 datasheet, @@ -61,7 +61,7 @@ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, * assume 89°C is critical temperature. */ -#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_TEMP_CRIT 89000 #define ACERHDF_FAN_OFF 0 #define ACERHDF_FAN_AUTO 1 @@ -69,7 +69,7 @@ * No matter what value the user puts into the fanon variable, turn on the fan * at 80 degree Celsius to prevent hardware damage */ -#define ACERHDF_MAX_FANON 80 +#define ACERHDF_MAX_FANON 80000 /* * Maximum interval between two temperature checks is 15 seconds, as the die @@ -85,8 +85,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63; -static unsigned int fanoff = 58; +static unsigned int fanon = 63000; +static unsigned int fanoff = 58000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; @@ -171,7 +171,7 @@ static int acerhdf_get_temp(int *temp) if (ec_read(bios_cfg->tempreg, &read_temp)) return -EINVAL; - *temp = read_temp; + *temp = read_temp * 1000; return 0; } diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74a05d..4226e535273 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -367,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* @@ -654,13 +644,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +693,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +851,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +994,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1110,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 36db20a8f89..edb16908384 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1680,36 +1680,48 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) | (__bv1) << 8 | (__bv2) } #define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2, \ - __eid1, __eid2, __ev1, __ev2) \ + __eid, __ev1, __ev2) \ { .vendor = (__v), \ .bios = TPID(__bid1, __bid2), \ - .ec = TPID(__eid1, __eid2), \ + .ec = __eid, \ .quirks = (__ev1) << 24 | (__ev2) << 16 \ | (__bv1) << 8 | (__bv2) } #define TPV_QI0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) #define TPV_QL0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2) #define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2) #define TPV_QL2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2) static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = { /* Numeric models ------------------ */ @@ -6313,7 +6325,7 @@ static int brightness_write(char *buf) * Doing it this way makes the syscall restartable in case of EINTR */ rc = brightness_set(level); - return (rc == -EINTR)? ERESTARTSYS : rc; + return (rc == -EINTR)? -ERESTARTSYS : rc; } static struct ibm_struct brightness_driver_data = { |