aboutsummaryrefslogtreecommitdiff
path: root/drivers/platform
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform')
-rw-r--r--drivers/platform/x86/Kconfig17
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/acerhdf.c602
-rw-r--r--drivers/platform/x86/dell-wmi.c56
-rw-r--r--drivers/platform/x86/hp-wmi.c87
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c411
6 files changed, 1098 insertions, 76 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac53641..5613483db14 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,6 +34,23 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd1b87..641b8bfa553 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 00000000000..bdfee177eef
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 2fab9416214..0f900cc9fa7 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -46,10 +46,53 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
static struct key_entry dell_wmi_keymap[] = {
{KE_KEY, 0xe045, KEY_PROG1},
+ {KE_KEY, 0xe009, KEY_EJECTCD},
+
+ /* These also contain the brightness level at offset 6 */
+ {KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+ {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+ /* Battery health status button */
+ {KE_KEY, 0xe007, KEY_BATTERY},
+
+ /* This is actually for all radios. Although physically a
+ * switch, the notification does not provide an indication of
+ * state and so it should be reported as a key */
+ {KE_KEY, 0xe008, KEY_WLAN},
+
+ /* The next device is at offset 6, the active devices are at
+ offset 8 and the attached devices at offset 10 */
+ {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+ {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+ /* BIOS error detected */
+ {KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+ /* Wifi Catcher */
+ {KE_KEY, 0xe011, KEY_PROG2},
+
+ /* Ambient light sensor toggle */
+ {KE_IGNORE, 0xe013, KEY_RESERVED},
+
+ {KE_IGNORE, 0xe020, KEY_MUTE},
+ {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+ {KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+ {KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+ {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+ {KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+ {KE_IGNORE, 0xe045, KEY_NUMLOCK},
+ {KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
{KE_END, 0}
};
@@ -122,15 +165,20 @@ static void dell_wmi_notify(u32 value, void *context)
if (obj && obj->type == ACPI_TYPE_BUFFER) {
int *buffer = (int *)obj->buffer.pointer;
- key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ /*
+ * The upper bytes of the event may contain
+ * additional information, so mask them off for the
+ * scancode lookup
+ */
+ key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
if (key) {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
input_report_key(dell_wmi_input_dev, key->keycode, 0);
input_sync(dell_wmi_input_dev);
- } else
+ } else if (buffer[1] & 0xFFFF)
printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- buffer[1]);
+ buffer[1] & 0xFFFF);
}
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 16fffe44e33..4ac2311c00a 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -47,7 +47,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
@@ -75,10 +75,9 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
- {KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@ static int hp_wmi_als_state(void)
static int hp_wmi_dock_state(void)
{
- return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return (ret & 0x4) ? 1 : 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@ static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%d\n", value);
}
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int value = hp_wmi_tablet_state();
+ if (value < 0)
+ return -EINVAL;
+ return sprintf(buf, "%d\n", value);
+}
+
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -244,6 +267,7 @@ static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
{
@@ -326,13 +350,13 @@ static void hp_wmi_notify(u32 value, void *context)
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
- case KE_SW:
- input_report_switch(hp_wmi_input_dev,
- key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
+ } else if (eventcode == 0x1) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
} else if (eventcode == 0x5) {
if (wifi_rfkill)
rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@ static int __init hp_wmi_input_setup(void)
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
- case KE_SW:
- set_bit(EV_SW, hp_wmi_input_dev->evbit);
- set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
- /* Set initial dock state */
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
}
+ set_bit(EV_SW, hp_wmi_input_dev->evbit);
+ set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+ set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+ /* Set initial hardware state */
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+
err = input_register_device(hp_wmi_input_dev);
if (err) {
@@ -397,6 +422,7 @@ static void cleanup_sysfs(struct platform_device *device)
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
+ device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -416,6 +442,9 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
+ err = device_create_file(&device->dev, &dev_attr_tablet);
+ if (err)
+ goto add_sysfs_error;
if (wireless & 0x1) {
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
@@ -485,23 +514,17 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
static int hp_wmi_resume_handler(struct platform_device *device)
{
- struct key_entry *key;
-
/*
- * Docking state may have changed while suspended, so trigger
- * an input event for the current state. As this is a switch,
+ * Hardware state may have changed while suspended, so trigger
+ * input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
- for (key = hp_wmi_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_SW:
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
- }
- }
+
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 40d64c03278..a463fd72c49 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
@@ -257,6 +257,8 @@ static struct {
u32 wan:1;
u32 uwb:1;
u32 fan_ctrl_status_undef:1;
+ u32 second_fan:1;
+ u32 beep_needs_two_args:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@ struct thinkpad_id_data {
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
- u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 bios_model; /* 1Y = 0x5931, 0 = unknown */
u16 ec_model;
+ u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */
+ u16 ec_release;
char *model_str; /* ThinkPad T43 */
char *nummodel_str; /* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@ static void tpacpi_log_usertask(const char * const what)
} \
} while (0)
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY 0xffffU
+#define TPACPI_MATCH_UNKNOWN 0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+ unsigned int vendor;
+ u16 bios;
+ u16 ec;
+ unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist: array of &struct tpacpi_quirk
+ * @qlist_size: number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+ const struct tpacpi_quirk *qlist,
+ unsigned int qlist_size)
+{
+ while (qlist_size) {
+ if ((qlist->vendor == thinkpad_id.vendor ||
+ qlist->vendor == TPACPI_MATCH_ANY) &&
+ (qlist->bios == thinkpad_id.bios_model ||
+ qlist->bios == TPACPI_MATCH_ANY) &&
+ (qlist->ec == thinkpad_id.ec_model ||
+ qlist->ec == TPACPI_MATCH_ANY))
+ return qlist->quirks;
+
+ qlist_size--;
+ qlist++;
+ }
+ return 0;
+}
+
+
/****************************************************************************
****************************************************************************
*
@@ -2880,7 +2951,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* update bright_acpimode... */
tpacpi_check_std_acpi_brightness_support();
- if (tp_features.bright_acpimode) {
+ if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
printk(TPACPI_INFO
"This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
+ "tpacpi::dock_status1",
+ "tpacpi::dock_status2",
+ "tpacpi::unknown_led2",
+ "tpacpi::unknown_led3",
+ "tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x0081U
+#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
- return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+ return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
@@ -4956,6 +5032,10 @@ static int __init tpacpi_init_led(unsigned int led)
tpacpi_leds[led].led = led;
+ /* LEDs with no name don't get registered */
+ if (!tpacpi_led_names[led])
+ return 0;
+
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@ static int __init tpacpi_init_led(unsigned int led)
return rc;
}
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+ TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+ TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+ TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+ TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+ TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+ TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+ TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+ TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+ TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+ TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+ TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+ TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+ TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+ TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+ TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+ TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+ TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+ TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+ TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+ TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+ /* (1) - may have excess leds enabled on MSB */
+
+ /* Defaults (order matters, keep last, don't reorder!) */
+ { /* Lenovo */
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x1fffU,
+ },
+ { /* IBM ThinkPads with no EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+ .quirks = 0x00ffU,
+ },
+ { /* IBM ThinkPads with EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x00bfU,
+ },
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
+ unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
@@ -4999,6 +5128,9 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ if (led_supported == TPACPI_LED_NONE)
+ return 1;
+
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@ static int __init led_init(struct ibm_init_struct *iibm)
return -ENOMEM;
}
+ useful_leds = tpacpi_check_quirks(led_useful_qtable,
+ ARRAY_SIZE(led_useful_qtable));
+
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
- if (!tpacpi_is_led_restricted(i)) {
+ if (!tpacpi_is_led_restricted(i) &&
+ test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
@@ -5017,12 +5153,11 @@ static int __init led_init(struct ibm_init_struct *iibm)
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- if (led_supported != TPACPI_LED_NONE)
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ printk(TPACPI_NOTICE
+ "warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
- return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+ return 0;
}
#define str_led_status(s) \
@@ -5052,7 +5187,7 @@ static int led_read(char *p)
}
len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+ "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
@@ -5067,7 +5202,7 @@ static int led_write(char *buf)
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@ static struct ibm_struct led_driver_data = {
TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+ TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+ TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
static int __init beep_init(struct ibm_init_struct *iibm)
{
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@ static int __init beep_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
str_supported(beep_handle != NULL));
+ quirks = tpacpi_check_quirks(beep_quirk_table,
+ ARRAY_SIZE(beep_quirk_table));
+
+ tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
return (beep_handle)? 0 : 1;
}
@@ -5141,8 +5290,15 @@ static int beep_write(char *buf)
/* beep_cmd set */
} else
return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
+ if (tp_features.beep_needs_two_args) {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+ beep_cmd, 0))
+ return -EIO;
+ } else {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+ beep_cmd))
+ return -EIO;
+ }
}
return 0;
@@ -5569,6 +5725,10 @@ static struct ibm_struct ecdump_driver_data = {
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
*/
enum {
@@ -5869,6 +6029,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
brightness_mode);
}
+ /* Safety */
+ if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+ (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+ brightness_mode == TPACPI_BRGHT_MODE_EC))
+ return -EINVAL;
+
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
@@ -6161,6 +6327,21 @@ static struct ibm_struct volume_driver_data = {
* For firmware bugs, refer to:
* http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
*
+ * ----
+ *
+ * ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ * When bit 0 of EC register 0x31 is zero, the tachometer registers
+ * show the speed of the main fan. When bit 0 of EC register 0x31
+ * is one, the tachometer registers show the speed of the auxiliary
+ * fan.
+ *
+ * Fan control seems to affect both fans, regardless of the state
+ * of this bit.
+ *
+ * So far, only the firmware for the X60/X61 non-tablet versions
+ * seem to support this (firmware TP-7M).
+ *
* TPACPI_FAN_WR_ACPI_FANS:
* ThinkPad X31, X40, X41. Not available in the X60.
*
@@ -6187,6 +6368,8 @@ enum { /* Fan control constants */
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
+ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M)
+ bit 0 selects which fan is active */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */
* We assume 0x07 really means auto mode while this quirk is active,
* as this is far more likely than the ThinkPad being in level 7,
* which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
*/
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
{
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the HFSP register, and it ends up
- * being initially set to 0x07 when it *could* be
- * either 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -6292,6 +6463,38 @@ static void fan_quirk1_handle(u8 *fan_status)
}
}
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+ if (tp_features.second_fan) {
+ u8 val;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val &= 0xFEU;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+ }
+ return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+ u8 val;
+
+ if (!tp_features.second_fan)
+ return false;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val |= 0x01U;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+
+ return true;
+}
+
/*
* Call with fan_mutex held
*/
@@ -6369,6 +6572,8 @@ static int fan_get_speed(unsigned int *speed)
switch (fan_status_access_mode) {
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan1()))
+ return -EIO;
if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
!acpi_ec_read(fan_rpm_offset + 1, &hi)))
return -EIO;
@@ -6385,6 +6590,34 @@ static int fan_get_speed(unsigned int *speed)
return 0;
}
+static int fan2_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+ bool rc;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan2()))
+ return -EIO;
+ rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi);
+ fan_select_fan1(); /* play it safe */
+ if (rc)
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
static int fan_set_level(int level)
{
if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@ static struct device_attribute dev_attr_fan_fan1_input =
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan2_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+ __ATTR(fan2_input, S_IRUGO,
+ fan_fan2_input_show, NULL);
+
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
@@ -6823,6 +7075,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
static struct attribute *fan_attributes[] = {
&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
&dev_attr_fan_fan1_input.attr,
+ NULL, /* for fan2_input */
NULL
};
@@ -6830,9 +7083,36 @@ static const struct attribute_group fan_attr_group = {
.attrs = fan_attributes,
};
+#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */
+#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+ TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+ TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
static int __init fan_init(struct ibm_init_struct *iibm)
{
int rc;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@ static int __init fan_init(struct ibm_init_struct *iibm)
fan_control_commands = 0;
fan_watchdog_maxinterval = 0;
tp_features.fan_ctrl_status_undef = 0;
+ tp_features.second_fan = 0;
fan_control_desired_level = 7;
TPACPI_ACPIHANDLE_INIT(fans);
TPACPI_ACPIHANDLE_INIT(gfan);
TPACPI_ACPIHANDLE_INIT(sfan);
+ quirks = tpacpi_check_quirks(fan_quirk_table,
+ ARRAY_SIZE(fan_quirk_table));
+
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
- fan_quirk1_detect();
+ if (quirks & TPACPI_FAN_Q1)
+ fan_quirk1_setup();
+ if (quirks & TPACPI_FAN_2FAN) {
+ tp_features.second_fan = 1;
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+ "secondary fan support enabled\n");
+ }
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ if (tp_features.second_fan) {
+ /* attach second fan tachometer */
+ fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+ &dev_attr_fan_fan2_input.attr;
+ }
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (rc < 0)
@@ -7385,6 +7680,24 @@ err_out:
/* Probing */
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+ return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+ const char t)
+{
+ return s && strlen(s) >= 8 &&
+ tpacpi_is_fw_digit(s[0]) &&
+ tpacpi_is_fw_digit(s[1]) &&
+ s[2] == t && s[3] == 'T' &&
+ tpacpi_is_fw_digit(s[4]) &&
+ tpacpi_is_fw_digit(s[5]) &&
+ s[6] == 'W' && s[7] == 'W';
+}
+
/* returns 0 - probe ok, or < 0 - probe error.
* Probe ok doesn't mean thinkpad found.
* On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@ static int __must_check __init get_thinkpad_model_data(
tp->bios_version_str = kstrdup(s, GFP_KERNEL);
if (s && !tp->bios_version_str)
return -ENOMEM;
- if (!tp->bios_version_str)
+
+ /* Really ancient ThinkPad 240X will fail this, which is fine */
+ if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
return 0;
+
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
+ tp->bios_release = (tp->bios_version_str[4] << 8)
+ | tp->bios_version_str[5];
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@ static int __must_check __init get_thinkpad_model_data(
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
if (!tp->ec_version_str)
return -ENOMEM;
- tp->ec_model = ec_fw_string[0]
- | (ec_fw_string[1] << 8);
+
+ if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ tp->ec_release = (ec_fw_string[4] << 8)
+ | ec_fw_string[5];
+ } else {
+ printk(TPACPI_NOTICE
+ "ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ printk(TPACPI_NOTICE
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ }
break;
}
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 21:44:22 +0000