aboutsummaryrefslogtreecommitdiff
path: root/drivers/sbus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sbus')
-rw-r--r--drivers/sbus/Makefile4
-rw-r--r--drivers/sbus/char/Kconfig29
-rw-r--r--drivers/sbus/char/Makefile6
-rw-r--r--drivers/sbus/char/bbc_envctrl.c121
-rw-r--r--drivers/sbus/char/bbc_i2c.c267
-rw-r--r--drivers/sbus/char/bbc_i2c.h75
-rw-r--r--drivers/sbus/char/bpp.c1055
-rw-r--r--drivers/sbus/char/cpwatchdog.c858
-rw-r--r--drivers/sbus/char/display7seg.c251
-rw-r--r--drivers/sbus/char/envctrl.c147
-rw-r--r--drivers/sbus/char/flash.c130
-rw-r--r--drivers/sbus/char/riowatchdog.c295
-rw-r--r--drivers/sbus/char/rtc.c275
-rw-r--r--drivers/sbus/char/uctrl.c216
-rw-r--r--drivers/sbus/char/vfc.h171
-rw-r--r--drivers/sbus/char/vfc_dev.c736
-rw-r--r--drivers/sbus/char/vfc_i2c.c335
-rw-r--r--drivers/sbus/char/vfc_i2c.h44
-rw-r--r--drivers/sbus/dvma.c136
-rw-r--r--drivers/sbus/sbus.c316
20 files changed, 610 insertions, 4857 deletions
diff --git a/drivers/sbus/Makefile b/drivers/sbus/Makefile
index 7b1d24d9530..e94dc25805f 100644
--- a/drivers/sbus/Makefile
+++ b/drivers/sbus/Makefile
@@ -2,8 +2,4 @@
# Makefile for the linux kernel.
#
-ifneq ($(ARCH),m68k)
-obj-y := sbus.o dvma.o
-endif
-
obj-$(CONFIG_SBUSCHAR) += char/
diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig
index 400c65bfb8c..73cde85d04d 100644
--- a/drivers/sbus/char/Kconfig
+++ b/drivers/sbus/char/Kconfig
@@ -13,16 +13,6 @@ config SUN_OPENPROMIO
If unsure, say Y.
-config SUN_MOSTEK_RTC
- tristate "Mostek real time clock support"
- depends on SPARC32
- help
- The Mostek RTC chip is used on all known Sun computers except
- some JavaStations. For a JavaStation you need to say Y both here
- and to "Enhanced Real Time Clock Support".
-
- Say Y here unless you are building a special purpose kernel.
-
config OBP_FLASH
tristate "OBP Flash Device support"
depends on SPARC64
@@ -30,26 +20,9 @@ config OBP_FLASH
The OpenBoot PROM on Ultra systems is flashable. If you want to be
able to upgrade the OBP firmware, say Y here.
-config SUN_BPP
- tristate "Bidirectional parallel port support (OBSOLETE)"
- depends on EXPERIMENTAL
- help
- Say Y here to support Sun's obsolete variant of IEEE1284
- bidirectional parallel port protocol as /dev/bppX. Can be built on
- x86 machines.
-
-config SUN_VIDEOPIX
- tristate "Videopix Frame Grabber (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (BROKEN || !64BIT)
- help
- Say Y here to support the Videopix Frame Grabber from Sun
- Microsystems, commonly found on SPARCstations. This card, which is
- based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and
- SVIDEO signals.
-
config TADPOLE_TS102_UCTRL
tristate "Tadpole TS102 Microcontroller support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SPARC32
+ depends on EXPERIMENTAL
help
Say Y here to directly support the TS102 Microcontroller interface
on the Tadpole Sparcbook 3. This device handles power-management
diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile
index 7ab060e9a5f..78b6183c986 100644
--- a/drivers/sbus/char/Makefile
+++ b/drivers/sbus/char/Makefile
@@ -7,18 +7,12 @@
# Rewritten to use lists instead of if-statements.
#
-vfc-objs := vfc_dev.o vfc_i2c.o
bbc-objs := bbc_i2c.o bbc_envctrl.o
obj-$(CONFIG_ENVCTRL) += envctrl.o
obj-$(CONFIG_DISPLAY7SEG) += display7seg.o
-obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwatchdog.o
-obj-$(CONFIG_WATCHDOG_RIO) += riowatchdog.o
obj-$(CONFIG_OBP_FLASH) += flash.o
obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o
-obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o
-obj-$(CONFIG_SUN_BPP) += bpp.o
-obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o
obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o
obj-$(CONFIG_SUN_JSFLASH) += jsflash.o
obj-$(CONFIG_BBC_I2C) += bbc.o
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index 0bde26989a2..15dab96d05e 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -1,15 +1,15 @@
-/* $Id: bbc_envctrl.c,v 1.4 2001/04/06 16:48:08 davem Exp $
- * bbc_envctrl.c: UltraSPARC-III environment control driver.
+/* bbc_envctrl.c: UltraSPARC-III environment control driver.
*
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/kmod.h>
#include <linux/reboot.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/oplib.h>
-#include <asm/ebus.h>
#include "bbc_i2c.h"
#include "max1617.h"
@@ -75,43 +75,8 @@ static struct temp_limits amb_temp_limits[2] = {
{ 65, 55, 40, 5, -5, -10 },
};
-enum fan_action { FAN_SLOWER, FAN_SAME, FAN_FASTER, FAN_FULLBLAST, FAN_STATE_MAX };
-
-struct bbc_cpu_temperature {
- struct bbc_cpu_temperature *next;
-
- struct bbc_i2c_client *client;
- int index;
-
- /* Current readings, and history. */
- s8 curr_cpu_temp;
- s8 curr_amb_temp;
- s8 prev_cpu_temp;
- s8 prev_amb_temp;
- s8 avg_cpu_temp;
- s8 avg_amb_temp;
-
- int sample_tick;
-
- enum fan_action fan_todo[2];
-#define FAN_AMBIENT 0
-#define FAN_CPU 1
-};
-
-struct bbc_cpu_temperature *all_bbc_temps;
-
-struct bbc_fan_control {
- struct bbc_fan_control *next;
-
- struct bbc_i2c_client *client;
- int index;
-
- int psupply_fan_on;
- int cpu_fan_speed;
- int system_fan_speed;
-};
-
-struct bbc_fan_control *all_bbc_fans;
+static LIST_HEAD(all_temps);
+static LIST_HEAD(all_fans);
#define CPU_FAN_REG 0xf0
#define SYS_FAN_REG 0xf2
@@ -330,7 +295,7 @@ static enum fan_action prioritize_fan_action(int which_fan)
* recommend we do, and perform that action on all the
* fans.
*/
- for (tp = all_bbc_temps; tp; tp = tp->next) {
+ list_for_each_entry(tp, &all_temps, glob_list) {
if (tp->fan_todo[which_fan] == FAN_FULLBLAST) {
decision = FAN_FULLBLAST;
break;
@@ -439,7 +404,7 @@ static void fans_full_blast(void)
/* Since we will not be monitoring things anymore, put
* the fans on full blast.
*/
- for (fp = all_bbc_fans; fp; fp = fp->next) {
+ list_for_each_entry(fp, &all_fans, glob_list) {
fp->cpu_fan_speed = FAN_SPEED_MAX;
fp->system_fan_speed = FAN_SPEED_MAX;
fp->psupply_fan_on = 1;
@@ -463,11 +428,11 @@ static int kenvctrld(void *__unused)
if (kthread_should_stop())
break;
- for (tp = all_bbc_temps; tp; tp = tp->next) {
+ list_for_each_entry(tp, &all_temps, glob_list) {
get_current_temps(tp);
analyze_temps(tp, &last_warning_jiffies);
}
- for (fp = all_bbc_fans; fp; fp = fp->next)
+ list_for_each_entry(fp, &all_fans, glob_list)
maybe_new_fan_speeds(fp);
}
printk(KERN_INFO "bbc_envctrl: kenvctrld exiting...\n");
@@ -477,7 +442,8 @@ static int kenvctrld(void *__unused)
return 0;
}
-static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
+static void attach_one_temp(struct bbc_i2c_bus *bp, struct of_device *op,
+ int temp_idx)
{
struct bbc_cpu_temperature *tp;
@@ -485,20 +451,17 @@ static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
if (!tp)
return;
- tp->client = bbc_i2c_attach(echild);
+ tp->client = bbc_i2c_attach(bp, op);
if (!tp->client) {
kfree(tp);
return;
}
+
tp->index = temp_idx;
- {
- struct bbc_cpu_temperature **tpp = &all_bbc_temps;
- while (*tpp)
- tpp = &((*tpp)->next);
- tp->next = NULL;
- *tpp = tp;
- }
+
+ list_add(&tp->glob_list, &all_temps);
+ list_add(&tp->bp_list, &bp->temps);
/* Tell it to convert once every 5 seconds, clear all cfg
* bits.
@@ -524,7 +487,8 @@ static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
tp->fan_todo[FAN_CPU] = FAN_SAME;
}
-static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
+static void attach_one_fan(struct bbc_i2c_bus *bp, struct of_device *op,
+ int fan_idx)
{
struct bbc_fan_control *fp;
@@ -532,7 +496,7 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
if (!fp)
return;
- fp->client = bbc_i2c_attach(echild);
+ fp->client = bbc_i2c_attach(bp, op);
if (!fp->client) {
kfree(fp);
return;
@@ -540,13 +504,8 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
fp->index = fan_idx;
- {
- struct bbc_fan_control **fpp = &all_bbc_fans;
- while (*fpp)
- fpp = &((*fpp)->next);
- fp->next = NULL;
- *fpp = fp;
- }
+ list_add(&fp->glob_list, &all_fans);
+ list_add(&fp->bp_list, &bp->fans);
/* The i2c device controlling the fans is write-only.
* So the only way to keep track of the current power
@@ -563,18 +522,18 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
set_fan_speeds(fp);
}
-int bbc_envctrl_init(void)
+int bbc_envctrl_init(struct bbc_i2c_bus *bp)
{
- struct linux_ebus_child *echild;
+ struct of_device *op;
int temp_index = 0;
int fan_index = 0;
int devidx = 0;
- while ((echild = bbc_i2c_getdev(devidx++)) != NULL) {
- if (!strcmp(echild->prom_node->name, "temperature"))
- attach_one_temp(echild, temp_index++);
- if (!strcmp(echild->prom_node->name, "fan-control"))
- attach_one_fan(echild, fan_index++);
+ while ((op = bbc_i2c_getdev(bp, devidx++)) != NULL) {
+ if (!strcmp(op->node->name, "temperature"))
+ attach_one_temp(bp, op, temp_index++);
+ if (!strcmp(op->node->name, "fan-control"))
+ attach_one_fan(bp, op, fan_index++);
}
if (temp_index != 0 && fan_index != 0) {
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
@@ -597,26 +556,22 @@ static void destroy_one_fan(struct bbc_fan_control *fp)
kfree(fp);
}
-void bbc_envctrl_cleanup(void)
+void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp)
{
- struct bbc_cpu_temperature *tp;
- struct bbc_fan_control *fp;
+ struct bbc_cpu_temperature *tp, *tpos;
+ struct bbc_fan_control *fp, *fpos;
kthread_stop(kenvctrld_task);
- tp = all_bbc_temps;
- while (tp != NULL) {
- struct bbc_cpu_temperature *next = tp->next;
+ list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
+ list_del(&tp->bp_list);
+ list_del(&tp->glob_list);
destroy_one_temp(tp);
- tp = next;
}
- all_bbc_temps = NULL;
- fp = all_bbc_fans;
- while (fp != NULL) {
- struct bbc_fan_control *next = fp->next;
+ list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) {
+ list_del(&fp->bp_list);
+ list_del(&fp->glob_list);
destroy_one_fan(fp);
- fp = next;
}
- all_bbc_fans = NULL;
}
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index ac8ef2ce07f..f08e169ba1b 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -1,8 +1,7 @@
-/* $Id: bbc_i2c.c,v 1.2 2001/04/02 09:59:08 davem Exp $
- * bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
+/* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
* platforms.
*
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
@@ -14,9 +13,8 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/oplib.h>
-#include <asm/ebus.h>
-#include <asm/spitfire.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/bbc.h>
#include <asm/io.h>
@@ -53,54 +51,12 @@
* The second controller also connects to the smartcard reader, if present.
*/
-#define NUM_CHILDREN 8
-struct bbc_i2c_bus {
- struct bbc_i2c_bus *next;
- int index;
- spinlock_t lock;
- void __iomem *i2c_bussel_reg;
- void __iomem *i2c_control_regs;
- unsigned char own, clock;
-
- wait_queue_head_t wq;
- volatile int waiting;
-
- struct linux_ebus_device *bus_edev;
- struct {
- struct linux_ebus_child *device;
- int client_claimed;
- } devs[NUM_CHILDREN];
-};
-
-static struct bbc_i2c_bus *all_bbc_i2c;
-
-struct bbc_i2c_client {
- struct bbc_i2c_bus *bp;
- struct linux_ebus_child *echild;
- int bus;
- int address;
-};
-
-static int find_device(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild)
+static void set_device_claimage(struct bbc_i2c_bus *bp, struct of_device *op, int val)
{
int i;
for (i = 0; i < NUM_CHILDREN; i++) {
- if (bp->devs[i].device == echild) {
- if (bp->devs[i].client_claimed)
- return 0;
- return 1;
- }
- }
- return 0;
-}
-
-static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild, int val)
-{
- int i;
-
- for (i = 0; i < NUM_CHILDREN; i++) {
- if (bp->devs[i].device == echild) {
+ if (bp->devs[i].device == op) {
bp->devs[i].client_claimed = val;
return;
}
@@ -110,61 +66,47 @@ static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child
#define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1)
#define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0)
-static struct bbc_i2c_bus *find_bus_for_device(struct linux_ebus_child *echild)
+struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
{
- struct bbc_i2c_bus *bp = all_bbc_i2c;
+ struct of_device *op = NULL;
+ int curidx = 0, i;
- while (bp != NULL) {
- if (find_device(bp, echild) != 0)
+ for (i = 0; i < NUM_CHILDREN; i++) {
+ if (!(op = bp->devs[i].device))
break;
- bp = bp->next;
+ if (curidx == index)
+ goto out;
+ op = NULL;
+ curidx++;
}
- return bp;
-}
-
-struct linux_ebus_child *bbc_i2c_getdev(int index)
-{
- struct bbc_i2c_bus *bp = all_bbc_i2c;
- struct linux_ebus_child *echild = NULL;
- int curidx = 0;
-
- while (bp != NULL) {
- struct bbc_i2c_bus *next = bp->next;
- int i;
-
- for (i = 0; i < NUM_CHILDREN; i++) {
- if (!(echild = bp->devs[i].device))
- break;
- if (curidx == index)
- goto out;
- echild = NULL;
- curidx++;
- }
- bp = next;
- }
out:
if (curidx == index)
- return echild;
+ return op;
return NULL;
}
-struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild)
+struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *op)
{
- struct bbc_i2c_bus *bp = find_bus_for_device(echild);
struct bbc_i2c_client *client;
+ const u32 *reg;
- if (!bp)
- return NULL;
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (!client)
return NULL;
client->bp = bp;
- client->echild = echild;
- client->bus = echild->resource[0].start;
- client->address = echild->resource[1].start;
+ client->op = op;
+
+ reg = of_get_property(op->node, "reg", NULL);
+ if (!reg) {
+ kfree(client);
+ return NULL;
+ }
- claim_device(bp, echild);
+ client->bus = reg[0];
+ client->address = reg[1];
+
+ claim_device(bp, op);
return client;
}
@@ -172,9 +114,9 @@ struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild)
void bbc_i2c_detach(struct bbc_i2c_client *client)
{
struct bbc_i2c_bus *bp = client->bp;
- struct linux_ebus_child *echild = client->echild;
+ struct of_device *op = client->op;
- release_device(bp, echild);
+ release_device(bp, op);
kfree(client);
}
@@ -355,44 +297,43 @@ static void __init reset_one_i2c(struct bbc_i2c_bus *bp)
writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
}
-static int __init attach_one_i2c(struct linux_ebus_device *edev, int index)
+static struct bbc_i2c_bus * __init attach_one_i2c(struct of_device *op, int index)
{
struct bbc_i2c_bus *bp;
- struct linux_ebus_child *echild;
+ struct device_node *dp;
int entry;
bp = kzalloc(sizeof(*bp), GFP_KERNEL);
if (!bp)
- return -ENOMEM;
+ return NULL;
- bp->i2c_control_regs = ioremap(edev->resource[0].start, 0x2);
+ bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs");
if (!bp->i2c_control_regs)
goto fail;
- if (edev->num_addrs == 2) {
- bp->i2c_bussel_reg = ioremap(edev->resource[1].start, 0x1);
- if (!bp->i2c_bussel_reg)
- goto fail;
- }
+ bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel");
+ if (!bp->i2c_bussel_reg)
+ goto fail;
bp->waiting = 0;
init_waitqueue_head(&bp->wq);
- if (request_irq(edev->irqs[0], bbc_i2c_interrupt,
+ if (request_irq(op->irqs[0], bbc_i2c_interrupt,
IRQF_SHARED, "bbc_i2c", bp))
goto fail;
bp->index = index;
- bp->bus_edev = edev;
+ bp->op = op;
spin_lock_init(&bp->lock);
- bp->next = all_bbc_i2c;
- all_bbc_i2c = bp;
entry = 0;
- for (echild = edev->children;
- echild && entry < 8;
- echild = echild->next, entry++) {
- bp->devs[entry].device = echild;
+ for (dp = op->node->child;
+ dp && entry < 8;
+ dp = dp->sibling, entry++) {
+ struct of_device *child_op;
+
+ child_op = of_find_device_by_node(dp);
+ bp->devs[entry].device = child_op;
bp->devs[entry].client_claimed = 0;
}
@@ -406,86 +347,90 @@ static int __init attach_one_i2c(struct linux_ebus_device *edev, int index)
reset_one_i2c(bp);
- return 0;
+ return bp;
fail:
if (bp->i2c_bussel_reg)
- iounmap(bp->i2c_bussel_reg);
+ of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1);
if (bp->i2c_control_regs)
- iounmap(bp->i2c_control_regs);
+ of_iounmap(&op->resource[0], bp->i2c_control_regs, 2);
kfree(bp);
- return -EINVAL;
-}
-
-static int __init bbc_present(void)
-{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, "bbc"))
- return 1;
- }
- }
- return 0;
+ return NULL;
}
-extern int bbc_envctrl_init(void);
-extern void bbc_envctrl_cleanup(void);
-static void bbc_i2c_cleanup(void);
+extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
+extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
-static int __init bbc_i2c_init(void)
+static int __devinit bbc_i2c_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
+ struct bbc_i2c_bus *bp;
int err, index = 0;
- if ((tlb_type != cheetah && tlb_type != cheetah_plus) ||
- !bbc_present())
- return -ENODEV;
+ bp = attach_one_i2c(op, index);
+ if (!bp)
+ return -EINVAL;
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, "i2c")) {
- if (!attach_one_i2c(edev, index))
- index++;
- }
- }
+ err = bbc_envctrl_init(bp);
+ if (err) {
+ free_irq(op->irqs[0], bp);
+ if (bp->i2c_bussel_reg)
+ of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
+ if (bp->i2c_control_regs)
+ of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
+ kfree(bp);
+ } else {
+ dev_set_drvdata(&op->dev, bp);
}
- if (!index)
- return -ENODEV;
-
- err = bbc_envctrl_init();
- if (err)
- bbc_i2c_cleanup();
return err;
}
-static void bbc_i2c_cleanup(void)
+static int __devexit bbc_i2c_remove(struct of_device *op)
{
- struct bbc_i2c_bus *bp = all_bbc_i2c;
+ struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
+
+ bbc_envctrl_cleanup(bp);
+
+ free_irq(op->irqs[0], bp);
- bbc_envctrl_cleanup();
+ if (bp->i2c_bussel_reg)
+ of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
+ if (bp->i2c_control_regs)
+ of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
- while (bp != NULL) {
- struct bbc_i2c_bus *next = bp->next;
+ kfree(bp);
- free_irq(bp->bus_edev->irqs[0], bp);
+ return 0;
+}
- if (bp->i2c_bussel_reg)
- iounmap(bp->i2c_bussel_reg);
- if (bp->i2c_control_regs)
- iounmap(bp->i2c_control_regs);
+static const struct of_device_id bbc_i2c_match[] = {
+ {
+ .name = "i2c",
+ .compatible = "SUNW,bbc-i2c",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bbc_i2c_match);
- kfree(bp);
+static struct of_platform_driver bbc_i2c_driver = {
+ .name = "bbc_i2c",
+ .match_table = bbc_i2c_match,
+ .probe = bbc_i2c_probe,
+ .remove = __devexit_p(bbc_i2c_remove),
+};
- bp = next;
- }
- all_bbc_i2c = NULL;
+static int __init bbc_i2c_init(void)
+{
+ return of_register_driver(&bbc_i2c_driver, &of_bus_type);
+}
+
+static void __exit bbc_i2c_exit(void)
+{
+ of_unregister_driver(&bbc_i2c_driver);
}
module_init(bbc_i2c_init);
-module_exit(bbc_i2c_cleanup);
+module_exit(bbc_i2c_exit);
+
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/bbc_i2c.h b/drivers/sbus/char/bbc_i2c.h
index fb01bd17704..83c4811b7b5 100644
--- a/drivers/sbus/char/bbc_i2c.h
+++ b/drivers/sbus/char/bbc_i2c.h
@@ -1,14 +1,79 @@
-/* $Id: bbc_i2c.h,v 1.2 2001/04/02 09:59:25 davem Exp $ */
#ifndef _BBC_I2C_H
#define _BBC_I2C_H
-#include <asm/ebus.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
-struct bbc_i2c_client;
+struct bbc_i2c_client {
+ struct bbc_i2c_bus *bp;
+ struct of_device *op;
+ int bus;
+ int address;
+};
+
+enum fan_action { FAN_SLOWER, FAN_SAME, FAN_FASTER, FAN_FULLBLAST, FAN_STATE_MAX };
+
+struct bbc_cpu_temperature {
+ struct list_head bp_list;
+ struct list_head glob_list;
+
+ struct bbc_i2c_client *client;
+ int index;
+
+ /* Current readings, and history. */
+ s8 curr_cpu_temp;
+ s8 curr_amb_temp;
+ s8 prev_cpu_temp;
+ s8 prev_amb_temp;
+ s8 avg_cpu_temp;
+ s8 avg_amb_temp;
+
+ int sample_tick;
+
+ enum fan_action fan_todo[2];
+#define FAN_AMBIENT 0
+#define FAN_CPU 1
+};
+
+struct bbc_fan_control {
+ struct list_head bp_list;
+ struct list_head glob_list;
+
+ struct bbc_i2c_client *client;
+ int index;
+
+ int psupply_fan_on;
+ int cpu_fan_speed;
+ int system_fan_speed;
+};
+
+#define NUM_CHILDREN 8
+
+struct bbc_i2c_bus {
+ struct bbc_i2c_bus *next;
+ int index;
+ spinlock_t lock;
+ void __iomem *i2c_bussel_reg;
+ void __iomem *i2c_control_regs;
+ unsigned char own, clock;
+
+ wait_queue_head_t wq;
+ volatile int waiting;
+
+ struct list_head temps;
+ struct list_head fans;
+
+ struct of_device *op;
+ struct {
+ struct of_device *device;
+ int client_claimed;
+ } devs[NUM_CHILDREN];
+};
/* Probing and attachment. */
-extern struct linux_ebus_child *bbc_i2c_getdev(int);
-extern struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *);
+extern struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *, int);
+extern struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *);
extern void bbc_i2c_detach(struct bbc_i2c_client *);
/* Register read/write. NOTE: Blocking! */
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
deleted file mode 100644
index bba21e053a1..00000000000
--- a/drivers/sbus/char/bpp.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/*
- * drivers/sbus/char/bpp.c
- *
- * Copyright (c) 1995 Picture Elements
- * Stephen Williams (steve@icarus.com)
- * Gus Baldauf (gbaldauf@ix.netcom.com)
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/smp_lock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#if defined(__i386__)
-# include <asm/system.h>
-#endif
-
-#if defined(__sparc__)
-# include <linux/init.h>
-# include <linux/delay.h> /* udelay() */
-
-# include <asm/oplib.h> /* OpenProm Library */
-# include <asm/sbus.h>
-#endif
-
-#include <asm/bpp.h>
-
-#define BPP_PROBE_CODE 0x55
-#define BPP_DELAY 100
-
-static const unsigned BPP_MAJOR = LP_MAJOR;
-static const char *bpp_dev_name = "bpp";
-
-/* When switching from compatibility to a mode where I can read, try
- the following mode first. */
-
-/* const unsigned char DEFAULT_ECP = 0x10; */
-static const unsigned char DEFAULT_ECP = 0x30;
-static const unsigned char DEFAULT_NIBBLE = 0x00;
-
-/*
- * These are 1284 time constraints, in units of jiffies.
- */
-
-static const unsigned long TIME_PSetup = 1;
-static const unsigned long TIME_PResponse = 6;
-static const unsigned long TIME_IDLE_LIMIT = 2000;
-
-/*
- * One instance per supported subdevice...
- */
-# define BPP_NO 3
-
-enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
-
-struct inst {
- unsigned present : 1; /* True if the hardware exists */
- unsigned enhanced : 1; /* True if the hardware in "enhanced" */
- unsigned opened : 1; /* True if the device is opened already */
- unsigned run_flag : 1; /* True if waiting for a repeate byte */
-
- unsigned char direction; /* 0 --> out, 0x20 --> IN */
- unsigned char pp_state; /* State of host controlled pins. */
- enum IEEE_Mode mode;
-
- unsigned char run_length;
- unsigned char repeat_byte;
-};
-
-static struct inst instances[BPP_NO];
-
-#if defined(__i386__)
-
-static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
-
-/*
- * These are for data access.
- * Control lines accesses are hidden in set_bits() and get_bits().
- * The exception is the probe procedure, which is system-dependent.
- */
-#define bpp_outb_p(data, base) outb_p((data), (base))
-#define bpp_inb(base) inb(base)
-#define bpp_inb_p(base) inb_p(base)
-
-/*
- * This method takes the pin values mask and sets the hardware pins to
- * the requested value: 1 == high voltage, 0 == low voltage. This
- * burries the annoying PC bit inversion and preserves the direction
- * flag.
- */
-static void set_pins(unsigned short pins, unsigned minor)
-{
- unsigned char bits = instances[minor].direction; /* == 0x20 */
-
- if (! (pins & BPP_PP_nStrobe)) bits |= 1;
- if (! (pins & BPP_PP_nAutoFd)) bits |= 2;
- if ( pins & BPP_PP_nInit) bits |= 4;
- if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
-
- instances[minor].pp_state = bits;
-
- outb_p(bits, base_addrs[minor]+2);
-}
-
-static unsigned short get_pins(unsigned minor)
-{
- unsigned short bits = 0;
-
- unsigned value = instances[minor].pp_state;
- if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
- if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
- if (value & 0x04) bits |= BPP_PP_nInit;
- if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
-
- value = inb_p(base_addrs[minor]+1);
- if (value & 0x08) bits |= BPP_GP_nFault;
- if (value & 0x10) bits |= BPP_GP_Select;
- if (value & 0x20) bits |= BPP_GP_PError;
- if (value & 0x40) bits |= BPP_GP_nAck;
- if (! (value & 0x80)) bits |= BPP_GP_Busy;
-
- return bits;
-}
-
-#endif /* __i386__ */
-
-#if defined(__sparc__)
-
-/*
- * Register block
- */
- /* DMA registers */
-#define BPP_CSR 0x00
-#define BPP_ADDR 0x04
-#define BPP_BCNT 0x08
-#define BPP_TST_CSR 0x0C
- /* Parallel Port registers */
-#define BPP_HCR 0x10
-#define BPP_OCR 0x12
-#define BPP_DR 0x14
-#define BPP_TCR 0x15
-#define BPP_OR 0x16
-#define BPP_IR 0x17
-#define BPP_ICR 0x18
-#define BPP_SIZE 0x1A
-
-/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */
-#define P_DEV_ID_MASK 0xf0000000 /* R */
-#define P_DEV_ID_ZEBRA 0x40000000
-#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */
-#define P_NA_LOADED 0x08000000 /* R NA wirtten but was not used */
-#define P_A_LOADED 0x04000000 /* R */
-#define P_DMA_ON 0x02000000 /* R DMA is not disabled */
-#define P_EN_NEXT 0x01000000 /* RW */
-#define P_TCI_DIS 0x00800000 /* RW TCI forbidden from interrupts */
-#define P_DIAG 0x00100000 /* RW Disables draining and resetting
- of P-FIFO on loading of P_ADDR*/
-#define P_BURST_SIZE 0x000c0000 /* RW SBus burst size */
-#define P_BURST_8 0x00000000
-#define P_BURST_4 0x00040000
-#define P_BURST_1 0x00080000 /* "No burst" write */
-#define P_TC 0x00004000 /* RW1 Term Count, can be cleared when
- P_EN_NEXT=1 */
-#define P_EN_CNT 0x00002000 /* RW */
-#define P_EN_DMA 0x00000200 /* RW */
-#define P_WRITE 0x00000100 /* R DMA dir, 1=to ram, 0=to port */
-#define P_RESET 0x00000080 /* RW */
-#define P_SLAVE_ERR 0x00000040 /* RW1 Access size error */
-#define P_INVALIDATE 0x00000020 /* W Drop P-FIFO */
-#define P_INT_EN 0x00000010 /* RW OK to P_INT_PEND||P_ERR_PEND */
-#define P_DRAINING 0x0000000c /* R P-FIFO is draining to memory */
-#define P_ERR_PEND 0x00000002 /* R */
-#define P_INT_PEND 0x00000001 /* R */
-
-/* BPP_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
-#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
-#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
-
-/* BPP_OCR. */
-#define P_OCR_MEM_CLR 0x8000
-#define P_OCR_DATA_SRC 0x4000 /* ) */
-#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
-#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
-#define P_OCR_ACK_DSEL 0x0800 /* ) */
-#define P_OCR_EN_DIAG 0x0400
-#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
-#define P_OCR_ACK_OP 0x0100 /* Ack operation */
-#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
-
-/* BPP_TCR */
-#define P_TCR_DIR 0x08
-#define P_TCR_BUSY 0x04
-#define P_TCR_ACK 0x02
-#define P_TCR_DS 0x01 /* Strobe */
-
-/* BPP_OR */
-#define P_OR_V3 0x20 /* ) */
-#define P_OR_V2 0x10 /* ) on Zebra only */
-#define P_OR_V1 0x08 /* ) */
-#define P_OR_INIT 0x04
-#define P_OR_AFXN 0x02 /* Auto Feed */
-#define P_OR_SLCT_IN 0x01
-
-/* BPP_IR */
-#define P_IR_PE 0x04
-#define P_IR_SLCT 0x02
-#define P_IR_ERR 0x01
-
-/* BPP_ICR */
-#define P_DS_IRQ 0x8000 /* RW1 */
-#define P_ACK_IRQ 0x4000 /* RW1 */
-#define P_BUSY_IRQ 0x2000 /* RW1 */
-#define P_PE_IRQ 0x1000 /* RW1 */
-#define P_SLCT_IRQ 0x0800 /* RW1 */
-#define P_ERR_IRQ 0x0400 /* RW1 */
-#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
-#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
-#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
-#define P_BUSY_IRQ_EN 0x0040 /* RW */
-#define P_PE_IRP 0x0020 /* RW 1= rising edge */
-#define P_PE_IRQ_EN 0x0010 /* RW */
-#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
-#define P_SLCT_IRQ_EN 0x0004 /* RW */
-#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
-#define P_ERR_IRQ_EN 0x0001 /* RW */
-
-static void __iomem *base_addrs[BPP_NO];
-
-#define bpp_outb_p(data, base) sbus_writeb(data, (base) + BPP_DR)
-#define bpp_inb_p(base) sbus_readb((base) + BPP_DR)
-#define bpp_inb(base) sbus_readb((base) + BPP_DR)
-
-static void set_pins(unsigned short pins, unsigned minor)
-{
- void __iomem *base = base_addrs[minor];
- unsigned char bits_tcr = 0, bits_or = 0;
-
- if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
- if ( pins & BPP_PP_nStrobe) bits_tcr |= P_TCR_DS;
-
- if ( pins & BPP_PP_nAutoFd) bits_or |= P_OR_AFXN;
- if (! (pins & BPP_PP_nInit)) bits_or |= P_OR_INIT;
- if (! (pins & BPP_PP_nSelectIn)) bits_or |= P_OR_SLCT_IN;
-
- sbus_writeb(bits_or, base + BPP_OR);
- sbus_writeb(bits_tcr, base + BPP_TCR);
-}
-
-/*
- * i386 people read output pins from a software image.
- * We may get them back from hardware.
- * Again, inversion of pins must he buried here.
- */
-static unsigned short get_pins(unsigned minor)
-{
- void __iomem *base = base_addrs[minor];
- unsigned short bits = 0;
- unsigned value_tcr = sbus_readb(base + BPP_TCR);
- unsigned value_ir = sbus_readb(base + BPP_IR);
- unsigned value_or = sbus_readb(base + BPP_OR);
-
- if (value_tcr & P_TCR_DS) bits |= BPP_PP_nStrobe;
- if (value_or & P_OR_AFXN) bits |= BPP_PP_nAutoFd;
- if (! (value_or & P_OR_INIT)) bits |= BPP_PP_nInit;
- if (! (value_or & P_OR_SLCT_IN)) bits |= BPP_PP_nSelectIn;
-
- if (value_ir & P_IR_ERR) bits |= BPP_GP_nFault;
- if (! (value_ir & P_IR_SLCT)) bits |= BPP_GP_Select;
- if (! (value_ir & P_IR_PE)) bits |= BPP_GP_PError;
- if (! (value_tcr & P_TCR_ACK)) bits |= BPP_GP_nAck;
- if (value_tcr & P_TCR_BUSY) bits |= BPP_GP_Busy;
-
- return bits;
-}
-
-#endif /* __sparc__ */
-
-static void snooze(unsigned long snooze_time, unsigned minor)
-{
- schedule_timeout_uninterruptible(snooze_time + 1);
-}
-
-static int wait_for(unsigned short set, unsigned short clr,
- unsigned long delay, unsigned minor)
-{
- unsigned short pins = get_pins(minor);
-
- unsigned long extime = 0;
-
- /*
- * Try a real fast scan for the first jiffy, in case the device
- * responds real good. The first while loop guesses an expire
- * time accounting for possible wraparound of jiffies.
- */
- while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
- while ( (time_before(jiffies, extime))
- && (((pins & set) != set) || ((pins & clr) != 0)) ) {
- pins = get_pins(minor);
- }
-
- delay -= 1;
-
- /*
- * If my delay expired or the pins are still not where I want
- * them, then resort to using the timer and greatly reduce my
- * sample rate. If the peripheral is going to be slow, this will
- * give the CPU up to some more worthy process.
- */
- while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-
- snooze(1, minor);
- pins = get_pins(minor);
- delay -= 1;
- }
-
- if (delay == 0) return -1;
- else return pins;
-}
-
-/*
- * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
- * errno means something broke, and I do not yet know how to fix it.
- */
-static int negotiate(unsigned char mode, unsigned minor)
-{
- int rc;
- unsigned short pins = get_pins(minor);
- if (pins & BPP_PP_nSelectIn) return -EIO;
-
-
- /* Event 0: Write the mode to the data lines */
- bpp_outb_p(mode, base_addrs[minor]);
-
- snooze(TIME_PSetup, minor);
-
- /* Event 1: Strobe the mode code into the peripheral */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Event 2: Peripheral responds as a 1284 device. */
- rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
- BPP_GP_nAck,
- TIME_PResponse,
- minor);
-
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 3: latch extensibility request */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
-
- /* ... quick nap while peripheral ponders the byte i'm sending...*/
- snooze(1, minor);
-
- /* Event 4: restore strobe, to ACK peripheral's response. */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Event 6: Peripheral latches response bits */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
- if (rc == -1) return -EIO;
-
- /* A 1284 device cannot refuse nibble mode */
- if (mode == DEFAULT_NIBBLE) return 0;
-
- if (pins & BPP_GP_Select) return 0;
-
- return -EPROTONOSUPPORT;
-}
-
-static int terminate(unsigned minor)
-{
- int rc;
-
- /* Event 22: Request termination of 1284 mode */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Wait for Events 23 and 24: ACK termination request. */
- rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
- BPP_GP_nAck,
- TIME_PSetup+TIME_PResponse,
- minor);
-
- instances[minor].direction = 0;
- instances[minor].mode = COMPATIBILITY;
-
- if (rc == -1) {
- return -EIO;
- }
-
- /* Event 25: Handshake by lowering nAutoFd */
- set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- /* Event 26: Peripheral wiggles lines... */
-
- /* Event 27: Peripheral sets nAck HIGH to ack handshake */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) {
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
- return -EIO;
- }
-
- /* Event 28: Finish phase by raising nAutoFd */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
- return 0;
-}
-
-static DEFINE_SPINLOCK(bpp_open_lock);
-
-/*
- * Allow only one process to open the device at a time.
- */
-static int bpp_open(struct inode *inode, struct file *f)
-{
- unsigned minor = iminor(inode);
- int ret;
-
- lock_kernel();
- spin_lock(&bpp_open_lock);
- ret = 0;
- if (minor >= BPP_NO) {
- ret = -ENODEV;
- } else {
- if (! instances[minor].present) {
- ret = -ENODEV;
- } else {
- if (instances[minor].opened)
- ret = -EBUSY;
- else
- instances[minor].opened = 1;
- }
- }
- spin_unlock(&bpp_open_lock);
- unlock_kernel();
-
- return ret;
-}
-
-/*
- * When the process closes the device, this method is called to clean
- * up and reset the hardware. Always leave the device in compatibility
- * mode as this is a reasonable place to clean up from messes made by
- * ioctls, or other mayhem.
- */
-static int bpp_release(struct inode *inode, struct file *f)
-{
- unsigned minor = iminor(inode);
-
- spin_lock(&bpp_open_lock);
- instances[minor].opened = 0;
-
- if (instances[minor].mode != COMPATIBILITY)
- terminate(minor);
-
- spin_unlock(&bpp_open_lock);
-
- return 0;
-}
-
-static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
-{
- unsigned long remaining = cnt;
- long rc;
-
- while (remaining > 0) {
- unsigned char byte = 0;
- int pins;
-
- /* Event 7: request nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
- /* Wait for event 9: Peripher strobes first nibble */
- pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
- if (pins == -1) return -ETIMEDOUT;
-
- /* Event 10: I handshake nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
- if (pins & BPP_GP_nFault) byte |= 0x01;
- if (pins & BPP_GP_Select) byte |= 0x02;
- if (pins & BPP_GP_PError) byte |= 0x04;
- if (pins & BPP_GP_Busy) byte |= 0x08;
-
- /* Wait for event 11: Peripheral handshakes nibble */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-
- /* Event 7: request nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
- /* Wait for event 9: Peripher strobes first nibble */
- pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 10: I handshake nibble */
- set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
- if (pins & BPP_GP_nFault) byte |= 0x10;
- if (pins & BPP_GP_Select) byte |= 0x20;
- if (pins & BPP_GP_PError) byte |= 0x40;
- if (pins & BPP_GP_Busy) byte |= 0x80;
-
- if (put_user(byte, c))
- return -EFAULT;
- c += 1;
- remaining -= 1;
-
- /* Wait for event 11: Peripheral handshakes nibble */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) return -EIO;
- }
-
- return cnt - remaining;
-}
-
-static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
-{
- unsigned long remaining;
- long rc;
-
- /* Turn ECP mode from forward to reverse if needed. */
- if (! instances[minor].direction) {
- unsigned short pins = get_pins(minor);
-
- /* Event 38: Turn the bus around */
- instances[minor].direction = 0x20;
- pins &= ~BPP_PP_nAutoFd;
- set_pins(pins, minor);
-
- /* Event 39: Set pins for reverse mode. */
- snooze(TIME_PSetup, minor);
- set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
- /* Wait for event 40: Peripheral ready to be strobed */
- rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
- }
-
- remaining = cnt;
-
- while (remaining > 0) {
-
- /* If there is a run length for a repeated byte, repeat */
- /* that byte a few times. */
- if (instances[minor].run_length && !instances[minor].run_flag) {
-
- char buffer[128];
- unsigned idx;
- unsigned repeat = remaining < instances[minor].run_length
- ? remaining
- : instances[minor].run_length;
-
- for (idx = 0 ; idx < repeat ; idx += 1)
- buffer[idx] = instances[minor].repeat_byte;
-
- if (copy_to_user(c, buffer, repeat))
- return -EFAULT;
- remaining -= repeat;
- c += repeat;
- instances[minor].run_length -= repeat;
- }
-
- if (remaining == 0) break;
-
-
- /* Wait for Event 43: Data active on the bus. */
- rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
- if (rc == -1) break;
-
- if (rc & BPP_GP_Busy) {
- /* OK, this is data. read it in. */
- unsigned char byte = bpp_inb(base_addrs[minor]);
- if (put_user(byte, c))
- return -EFAULT;
- c += 1;
- remaining -= 1;
-
- if (instances[minor].run_flag) {
- instances[minor].repeat_byte = byte;
- instances[minor].run_flag = 0;
- }
-
- } else {
- unsigned char byte = bpp_inb(base_addrs[minor]);
- if (byte & 0x80) {
- printk("bpp%d: "
- "Ignoring ECP channel %u from device.\n",
- minor, byte & 0x7f);
- } else {
- instances[minor].run_length = byte;
- instances[minor].run_flag = 1;
- }
- }
-
- /* Event 44: I got it. */
- set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
-
- /* Wait for event 45: peripheral handshake */
- rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- /* Event 46: Finish handshake */
- set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
- }
-
-
- return cnt - remaining;
-}
-
-static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
-{
- long rc;
- unsigned minor = iminor(f->f_path.dentry->d_inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
- switch (instances[minor].mode) {
-
- default:
- if (instances[minor].mode != COMPATIBILITY)
- terminate(minor);
-
- if (instances[minor].enhanced) {
- /* For now, do all reads with ECP-RLE mode */
- unsigned short pins;
-
- rc = negotiate(DEFAULT_ECP, minor);
- if (rc < 0) break;
-
- instances[minor].mode = ECP_RLE;
-
- /* Event 30: set nAutoFd low to setup for ECP mode */
- pins = get_pins(minor);
- pins &= ~BPP_PP_nAutoFd;
- set_pins(pins, minor);
-
- /* Wait for Event 31: peripheral ready */
- rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- rc = read_ecp(minor, c, cnt);
-
- } else {
- rc = negotiate(DEFAULT_NIBBLE, minor);
- if (rc < 0) break;
-
- instances[minor].mode = NIBBLE;
-
- rc = read_nibble(minor, c, cnt);
- }
- break;
-
- case NIBBLE:
- rc = read_nibble(minor, c, cnt);
- break;
-
- case ECP:
- case ECP_RLE:
- rc = read_ecp(minor, c, cnt);
- break;
-
- }
-
-
- return rc;
-}
-
-/*
- * Compatibility mode handshaking is a matter of writing data,
- * strobing it, and waiting for the printer to stop being busy.
- */
-static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
-{
- long rc;
- unsigned short pins = get_pins(minor);
-
- unsigned long remaining = cnt;
-
-
- while (remaining > 0) {
- unsigned char byte;
-
- if (get_user(byte, c))
- return -EFAULT;
- c += 1;
-
- rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- bpp_outb_p(byte, base_addrs[minor]);
- remaining -= 1;
- /* snooze(1, minor); */
-
- pins &= ~BPP_PP_nStrobe;
- set_pins(pins, minor);
-
- rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-
- pins |= BPP_PP_nStrobe;
- set_pins(pins, minor);
- }
-
- return cnt - remaining;
-}
-
-/*
- * Write data using ECP mode. Watch out that the port may be set up
- * for reading. If so, turn the port around.
- */
-static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
-{
- unsigned short pins = get_pins(minor);
- unsigned long remaining = cnt;
-
- if (instances[minor].direction) {
- int rc;
-
- /* Event 47 Request bus be turned around */
- pins |= BPP_PP_nInit;
- set_pins(pins, minor);
-
- /* Wait for Event 49: Peripheral relinquished bus */
- rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-
- pins |= BPP_PP_nAutoFd;
- instances[minor].direction = 0;
- set_pins(pins, minor);
- }
-
- while (remaining > 0) {
- unsigned char byte;
- int rc;
-
- if (get_user(byte, c))
- return -EFAULT;
-
- rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
- if (rc == -1) return -ETIMEDOUT;
-
- c += 1;
-
- bpp_outb_p(byte, base_addrs[minor]);
-
- pins &= ~BPP_PP_nStrobe;
- set_pins(pins, minor);
-
- pins |= BPP_PP_nStrobe;
- rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
- if (rc == -1) return -EIO;
-
- set_pins(pins, minor);
- }
-
- return cnt - remaining;
-}
-
-/*
- * Write to the peripheral. Be sensitive of the current mode. If I'm
- * in a mode that can be turned around (ECP) then just do
- * that. Otherwise, terminate and do my writing in compat mode. This
- * is the safest course as any device can handle it.
- */
-static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
-{
- long errno = 0;
- unsigned minor = iminor(f->f_path.dentry->d_inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
- switch (instances[minor].mode) {
-
- case ECP:
- case ECP_RLE:
- errno = write_ecp(minor, c, cnt);
- break;
- case COMPATIBILITY:
- errno = write_compat(minor, c, cnt);
- break;
- default:
- terminate(minor);
- errno = write_compat(minor, c, cnt);
- }
-
- return errno;
-}
-
-static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
- unsigned long arg)
-{
- int errno = 0;
-
- unsigned minor = iminor(inode);
- if (minor >= BPP_NO) return -ENODEV;
- if (!instances[minor].present) return -ENODEV;
-
-
- switch (cmd) {
-
- case BPP_PUT_PINS:
- set_pins(arg, minor);
- break;
-
- case BPP_GET_PINS:
- errno = get_pins(minor);
- break;
-
- case BPP_PUT_DATA:
- bpp_outb_p(arg, base_addrs[minor]);
- break;
-
- case BPP_GET_DATA:
- errno = bpp_inb_p(base_addrs[minor]);
- break;
-
- case BPP_SET_INPUT:
- if (arg)
- if (instances[minor].enhanced) {
- unsigned short bits = get_pins(minor);
- instances[minor].direction = 0x20;
- set_pins(bits, minor);
- } else {
- errno = -ENOTTY;
- }
- else {
- unsigned short bits = get_pins(minor);
- instances[minor].direction = 0x00;
- set_pins(bits, minor);
- }
- break;
-
- default:
- errno = -EINVAL;
- }
-
- return errno;
-}
-
-static const struct file_operations bpp_fops = {
- .owner = THIS_MODULE,
- .read = bpp_read,
- .write = bpp_write,
- .ioctl = bpp_ioctl,
- .open = bpp_open,
- .release = bpp_release,
-};
-
-#if defined(__i386__)
-
-#define collectLptPorts() {}
-
-static void probeLptPort(unsigned idx)
-{
- unsigned int testvalue;
- const unsigned short lpAddr = base_addrs[idx];
-
- instances[idx].present = 0;
- instances[idx].enhanced = 0;
- instances[idx].direction = 0;
- instances[idx].mode = COMPATIBILITY;
- instances[idx].run_length = 0;
- instances[idx].run_flag = 0;
- if (!request_region(lpAddr,3, bpp_dev_name)) return;
-
- /*
- * First, make sure the instance exists. Do this by writing to
- * the data latch and reading the value back. If the port *is*
- * present, test to see if it supports extended-mode
- * operation. This will be required for IEEE1284 reverse
- * transfers.
- */
-
- outb_p(BPP_PROBE_CODE, lpAddr);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- testvalue = inb_p(lpAddr);
- if (testvalue == BPP_PROBE_CODE) {
- unsigned save;
- instances[idx].present = 1;
-
- save = inb_p(lpAddr+2);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- outb_p(save|0x20, lpAddr+2);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- outb_p(~BPP_PROBE_CODE, lpAddr);
- for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
- ;
- testvalue = inb_p(lpAddr);
- if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
- instances[idx].enhanced = 0;
- else
- instances[idx].enhanced = 1;
- outb_p(save, lpAddr+2);
- }
- else {
- release_region(lpAddr,3);
- }
- /*
- * Leave the port in compat idle mode.
- */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
- printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
- instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
-}
-
-static inline void freeLptPort(int idx)
-{
- release_region(base_addrs[idx], 3);
-}
-
-#endif
-
-#if defined(__sparc__)
-
-static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
-{
- return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
-}
-
-static int collectLptPorts(void)
-{
- struct sbus_bus *bus;
- struct sbus_dev *dev;
- int count;
-
- count = 0;
- for_all_sbusdev(dev, bus) {
- if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
- if (count >= BPP_NO) {
- printk(KERN_NOTICE
- "bpp: More than %d bpp ports,"
- " rest is ignored\n", BPP_NO);
- return count;
- }
- base_addrs[count] = map_bpp(dev, count);
- count++;
- }
- }
- return count;
-}
-
-static void probeLptPort(unsigned idx)
-{
- void __iomem *rp = base_addrs[idx];
- __u32 csr;
- char *brand;
-
- instances[idx].present = 0;
- instances[idx].enhanced = 0;
- instances[idx].direction = 0;
- instances[idx].mode = COMPATIBILITY;
- instances[idx].run_length = 0;
- instances[idx].run_flag = 0;
-
- if (!rp) return;
-
- instances[idx].present = 1;
- instances[idx].enhanced = 1; /* Sure */
-
- csr = sbus_readl(rp + BPP_CSR);
- if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
- udelay(20);
- csr = sbus_readl(rp + BPP_CSR);
- if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
- printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
- }
- }
- printk("bpp%d: reset with 0x%08x ..", idx, csr);
- sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
- udelay(500);
- sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
- csr = sbus_readl(rp + BPP_CSR);
- printk(" done with csr=0x%08x ocr=0x%04x\n",
- csr, sbus_readw(rp + BPP_OCR));
-
- switch (csr & P_DEV_ID_MASK) {
- case P_DEV_ID_ZEBRA:
- brand = "Zebra";
- break;
- case P_DEV_ID_L64854:
- brand = "DMA2";
- break;
- default:
- brand = "Unknown";
- }
- printk("bpp%d: %s at %p\n", idx, brand, rp);
-
- /*
- * Leave the port in compat idle mode.
- */
- set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
- return;
-}
-
-static inline void freeLptPort(int idx)
-{
- sbus_iounmap(base_addrs[idx], BPP_SIZE);
-}
-
-#endif
-
-static int __init bpp_init(void)
-{
- int rc;
- unsigned idx;
-
- rc = collectLptPorts();
- if (rc == 0)
- return -ENODEV;
-
- rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
- if (rc < 0)
- return rc;
-
- for (idx = 0; idx < BPP_NO; idx++) {
- instances[idx].opened = 0;
- probeLptPort(idx);
- }
-
- return 0;
-}
-
-static void __exit bpp_cleanup(void)
-{
- unsigned idx;
-
- unregister_chrdev(BPP_MAJOR, bpp_dev_name);
-
- for (idx = 0; idx < BPP_NO; idx++) {
- if (instances[idx].present)
- freeLptPort(idx);
- }
-}
-
-module_init(bpp_init);
-module_exit(bpp_cleanup);
-
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c
deleted file mode 100644
index 23abfdfb44f..00000000000
--- a/drivers/sbus/char/cpwatchdog.c
+++ /dev/null
@@ -1,858 +0,0 @@
-/* cpwatchdog.c - driver implementation for hardware watchdog
- * timers found on Sun Microsystems CP1400 and CP1500 boards.
- *
- * This device supports both the generic Linux watchdog
- * interface and Solaris-compatible ioctls as best it is
- * able.
- *
- * NOTE: CP1400 systems appear to have a defective intr_mask
- * register on the PLD, preventing the disabling of
- * timer interrupts. We use a timer to periodically
- * reset 'stopped' watchdogs on affected platforms.
- *
- * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/major.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/smp_lock.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/ebus.h>
-#include <asm/oplib.h>
-#include <asm/uaccess.h>
-
-#include <asm/watchdog.h>
-
-#define WD_OBPNAME "watchdog"
-#define WD_BADMODEL "SUNW,501-5336"
-#define WD_BTIMEOUT (jiffies + (HZ * 1000))
-#define WD_BLIMIT 0xFFFF
-
-#define WD0_DEVNAME "watchdog0"
-#define WD1_DEVNAME "watchdog1"
-#define WD2_DEVNAME "watchdog2"
-
-#define WD0_MINOR 212
-#define WD1_MINOR 213
-#define WD2_MINOR 214
-
-
-/* Internal driver definitions
- */
-#define WD0_ID 0 /* Watchdog0 */
-#define WD1_ID 1 /* Watchdog1 */
-#define WD2_ID 2 /* Watchdog2 */
-#define WD_NUMDEVS 3 /* Device contains 3 timers */
-
-#define WD_INTR_OFF 0 /* Interrupt disable value */
-#define WD_INTR_ON 1 /* Interrupt enable value */
-
-#define WD_STAT_INIT 0x01 /* Watchdog timer is initialized */
-#define WD_STAT_BSTOP 0x02 /* Watchdog timer is brokenstopped */
-#define WD_STAT_SVCD 0x04 /* Watchdog interrupt occurred */
-
-/* Register value definitions
- */
-#define WD0_INTR_MASK 0x01 /* Watchdog device interrupt masks */
-#define WD1_INTR_MASK 0x02
-#define WD2_INTR_MASK 0x04
-
-#define WD_S_RUNNING 0x01 /* Watchdog device status running */
-#define WD_S_EXPIRED 0x02 /* Watchdog device status expired */
-
-/* Sun uses Altera PLD EPF8820ATC144-4
- * providing three hardware watchdogs:
- *
- * 1) RIC - sends an interrupt when triggered
- * 2) XIR - asserts XIR_B_RESET when triggered, resets CPU
- * 3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board
- *
- *** Timer register block definition (struct wd_timer_regblk)
- *
- * dcntr and limit registers (halfword access):
- * -------------------
- * | 15 | ...| 1 | 0 |
- * -------------------
- * |- counter val -|
- * -------------------
- * dcntr - Current 16-bit downcounter value.
- * When downcounter reaches '0' watchdog expires.
- * Reading this register resets downcounter with 'limit' value.
- * limit - 16-bit countdown value in 1/10th second increments.
- * Writing this register begins countdown with input value.
- * Reading from this register does not affect counter.
- * NOTES: After watchdog reset, dcntr and limit contain '1'
- *
- * status register (byte access):
- * ---------------------------
- * | 7 | ... | 2 | 1 | 0 |
- * --------------+------------
- * |- UNUSED -| EXP | RUN |
- * ---------------------------
- * status- Bit 0 - Watchdog is running
- * Bit 1 - Watchdog has expired
- *
- *** PLD register block definition (struct wd_pld_regblk)
- *
- * intr_mask register (byte access):
- * ---------------------------------
- * | 7 | ... | 3 | 2 | 1 | 0 |
- * +-------------+------------------
- * |- UNUSED -| WD3 | WD2 | WD1 |
- * ---------------------------------
- * WD3 - 1 == Interrupt disabled for watchdog 3
- * WD2 - 1 == Interrupt disabled for watchdog 2
- * WD1 - 1 == Interrupt disabled for watchdog 1
- *
- * pld_status register (byte access):
- * UNKNOWN, MAGICAL MYSTERY REGISTER
- *
- */
-#define WD_TIMER_REGSZ 16
-#define WD0_OFF 0
-#define WD1_OFF (WD_TIMER_REGSZ * 1)
-#define WD2_OFF (WD_TIMER_REGSZ * 2)
-#define PLD_OFF (WD_TIMER_REGSZ * 3)
-
-#define WD_DCNTR 0x00
-#define WD_LIMIT 0x04
-#define WD_STATUS 0x08
-
-#define PLD_IMASK (PLD_OFF + 0x00)
-#define PLD_STATUS (PLD_OFF + 0x04)
-
-/* Individual timer structure
- */
-struct wd_timer {
- __u16 timeout;
- __u8 intr_mask;
- unsigned char runstatus;
- void __iomem *regs;
-};
-
-/* Device structure
- */
-struct wd_device {
- int irq;
- spinlock_t lock;
- unsigned char isbaddoggie; /* defective PLD */
- unsigned char opt_enable;
- unsigned char opt_reboot;
- unsigned short opt_timeout;
- unsigned char initialized;
- struct wd_timer watchdog[WD_NUMDEVS];
- void __iomem *regs;
-};
-
-static struct wd_device wd_dev = {
- 0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0,
-};
-
-static struct timer_list wd_timer;
-
-static int wd0_timeout = 0;
-static int wd1_timeout = 0;
-static int wd2_timeout = 0;
-
-#ifdef MODULE
-module_param (wd0_timeout, int, 0);
-MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");
-module_param (wd1_timeout, int, 0);
-MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs");
-module_param (wd2_timeout, int, 0);
-MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs");
-
-MODULE_AUTHOR
- ("Eric Brower <ebrower@usa.net>");
-MODULE_DESCRIPTION
- ("Hardware watchdog driver for Sun Microsystems CP1400/1500");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE
- ("watchdog");
-#endif /* ifdef MODULE */
-
-/* Forward declarations of internal methods
- */
-#ifdef WD_DEBUG
-static void wd_dumpregs(void);
-#endif
-static irqreturn_t wd_interrupt(int irq, void *dev_id);
-static void wd_toggleintr(struct wd_timer* pTimer, int enable);
-static void wd_pingtimer(struct wd_timer* pTimer);
-static void wd_starttimer(struct wd_timer* pTimer);
-static void wd_resetbrokentimer(struct wd_timer* pTimer);
-static void wd_stoptimer(struct wd_timer* pTimer);
-static void wd_brokentimer(unsigned long data);
-static int wd_getstatus(struct wd_timer* pTimer);
-
-/* PLD expects words to be written in LSB format,
- * so we must flip all words prior to writing them to regs
- */
-static inline unsigned short flip_word(unsigned short word)
-{
- return ((word & 0xff) << 8) | ((word >> 8) & 0xff);
-}
-
-#define wd_writew(val, addr) (writew(flip_word(val), addr))
-#define wd_readw(addr) (flip_word(readw(addr)))
-#define wd_writeb(val, addr) (writeb(val, addr))
-#define wd_readb(addr) (readb(addr))
-
-
-/* CP1400s seem to have broken PLD implementations--
- * the interrupt_mask register cannot be written, so
- * no timer interrupts can be masked within the PLD.
- */
-static inline int wd_isbroken(void)
-{
- /* we could test this by read/write/read/restore
- * on the interrupt mask register only if OBP
- * 'watchdog-enable?' == FALSE, but it seems
- * ubiquitous on CP1400s
- */
- char val[32];
- prom_getproperty(prom_root_node, "model", val, sizeof(val));
- return((!strcmp(val, WD_BADMODEL)) ? 1 : 0);
-}
-
-/* Retrieve watchdog-enable? option from OBP
- * Returns 0 if false, 1 if true
- */
-static inline int wd_opt_enable(void)
-{
- int opt_node;
-
- opt_node = prom_getchild(prom_root_node);
- opt_node = prom_searchsiblings(opt_node, "options");
- return((-1 == prom_getint(opt_node, "watchdog-enable?")) ? 0 : 1);
-}
-
-/* Retrieve watchdog-reboot? option from OBP
- * Returns 0 if false, 1 if true
- */
-static inline int wd_opt_reboot(void)
-{
- int opt_node;
-
- opt_node = prom_getchild(prom_root_node);
- opt_node = prom_searchsiblings(opt_node, "options");
- return((-1 == prom_getint(opt_node, "watchdog-reboot?")) ? 0 : 1);
-}
-
-/* Retrieve watchdog-timeout option from OBP
- * Returns OBP value, or 0 if not located
- */
-static inline int wd_opt_timeout(void)
-{
- int opt_node;
- char value[32];
- char *p = value;
-
- opt_node = prom_getchild(prom_root_node);
- opt_node = prom_searchsiblings(opt_node, "options");
- opt_node = prom_getproperty(opt_node,
- "watchdog-timeout",
- value,
- sizeof(value));
- if(-1 != opt_node) {
- /* atoi implementation */
- for(opt_node = 0; /* nop */; p++) {
- if(*p >= '0' && *p <= '9') {
- opt_node = (10*opt_node)+(*p-'0');
- }
- else {
- break;
- }
- }
- }
- return((-1 == opt_node) ? (0) : (opt_node));
-}
-
-static int wd_open(struct inode *inode, struct file *f)
-{
- lock_kernel();
- switch(iminor(inode))
- {
- case WD0_MINOR:
- f->private_data = &wd_dev.watchdog[WD0_ID];
- break;
- case WD1_MINOR:
- f->private_data = &wd_dev.watchdog[WD1_ID];
- break;
- case WD2_MINOR:
- f->private_data = &wd_dev.watchdog[WD2_ID];
- break;
- default:
- unlock_kernel();
- return(-ENODEV);
- }
-
- /* Register IRQ on first open of device */
- if(0 == wd_dev.initialized)
- {
- if (request_irq(wd_dev.irq,
- &wd_interrupt,
- IRQF_SHARED,
- WD_OBPNAME,
- (void *)wd_dev.regs)) {
- printk("%s: Cannot register IRQ %d\n",
- WD_OBPNAME, wd_dev.irq);
- unlock_kernel();
- return(-EBUSY);
- }
- wd_dev.initialized = 1;
- }
-
- unlock_kernel();
- return(nonseekable_open(inode, f));
-}
-
-static int wd_release(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int wd_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int setopt = 0;
- struct wd_timer* pTimer = (struct wd_timer*)file->private_data;
- void __user *argp = (void __user *)arg;
- struct watchdog_info info = {
- 0,
- 0,
- "Altera EPF8820ATC144-4"
- };
-
- if(NULL == pTimer) {
- return(-EINVAL);
- }
-
- switch(cmd)
- {
- /* Generic Linux IOCTLs */
- case WDIOC_GETSUPPORT:
- if(copy_to_user(argp, &info, sizeof(struct watchdog_info))) {
- return(-EFAULT);
- }
- break;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- if (put_user(0, (int __user *)argp))
- return -EFAULT;
- break;
- case WDIOC_KEEPALIVE:
- wd_pingtimer(pTimer);
- break;
- case WDIOC_SETOPTIONS:
- if(copy_from_user(&setopt, argp, sizeof(unsigned int))) {
- return -EFAULT;
- }
- if(setopt & WDIOS_DISABLECARD) {
- if(wd_dev.opt_enable) {
- printk(
- "%s: cannot disable watchdog in ENABLED mode\n",
- WD_OBPNAME);
- return(-EINVAL);
- }
- wd_stoptimer(pTimer);
- }
- else if(setopt & WDIOS_ENABLECARD) {
- wd_starttimer(pTimer);
- }
- else {
- return(-EINVAL);
- }
- break;
- /* Solaris-compatible IOCTLs */
- case WIOCGSTAT:
- setopt = wd_getstatus(pTimer);
- if(copy_to_user(argp, &setopt, sizeof(unsigned int))) {
- return(-EFAULT);
- }
- break;
- case WIOCSTART:
- wd_starttimer(pTimer);
- break;
- case WIOCSTOP:
- if(wd_dev.opt_enable) {
- printk("%s: cannot disable watchdog in ENABLED mode\n",
- WD_OBPNAME);
- return(-EINVAL);
- }
- wd_stoptimer(pTimer);
- break;
- default:
- return(-EINVAL);
- }
- return(0);
-}
-
-static long wd_compat_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int rval = -ENOIOCTLCMD;
-
- switch (cmd) {
- /* solaris ioctls are specific to this driver */
- case WIOCSTART:
- case WIOCSTOP:
- case WIOCGSTAT:
- lock_kernel();
- rval = wd_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
- unlock_kernel();
- break;
- /* everything else is handled by the generic compat layer */
- default:
- break;
- }
-
- return rval;
-}
-
-static ssize_t wd_write(struct file *file,
- const char __user *buf,
- size_t count,
- loff_t *ppos)
-{
- struct wd_timer* pTimer = (struct wd_timer*)file->private_data;
-
- if(NULL == pTimer) {
- return(-EINVAL);
- }
-
- if (count) {
- wd_pingtimer(pTimer);
- return 1;
- }
- return 0;
-}
-
-static ssize_t wd_read(struct file * file, char __user *buffer,
- size_t count, loff_t *ppos)
-{
-#ifdef WD_DEBUG
- wd_dumpregs();
- return(0);
-#else
- return(-EINVAL);
-#endif /* ifdef WD_DEBUG */
-}
-
-static irqreturn_t wd_interrupt(int irq, void *dev_id)
-{
- /* Only WD0 will interrupt-- others are NMI and we won't
- * see them here....
- */
- spin_lock_irq(&wd_dev.lock);
- if((unsigned long)wd_dev.regs == (unsigned long)dev_id)
- {
- wd_stoptimer(&wd_dev.watchdog[WD0_ID]);
- wd_dev.watchdog[WD0_ID].runstatus |= WD_STAT_SVCD;
- }
- spin_unlock_irq(&wd_dev.lock);
- return IRQ_HANDLED;
-}
-
-static const struct file_operations wd_fops = {
- .owner = THIS_MODULE,
- .ioctl = wd_ioctl,
- .compat_ioctl = wd_compat_ioctl,
- .open = wd_open,
- .write = wd_write,
- .read = wd_read,
- .release = wd_release,
-};
-
-static struct miscdevice wd0_miscdev = { WD0_MINOR, WD0_DEVNAME, &wd_fops };
-static struct miscdevice wd1_miscdev = { WD1_MINOR, WD1_DEVNAME, &wd_fops };
-static struct miscdevice wd2_miscdev = { WD2_MINOR, WD2_DEVNAME, &wd_fops };
-
-#ifdef WD_DEBUG
-static void wd_dumpregs(void)
-{
- /* Reading from downcounters initiates watchdog countdown--
- * Example is included below for illustration purposes.
- */
- int i;
- printk("%s: dumping register values\n", WD_OBPNAME);
- for(i = WD0_ID; i < WD_NUMDEVS; ++i) {
- /* printk("\t%s%i: dcntr at 0x%lx: 0x%x\n",
- * WD_OBPNAME,
- * i,
- * (unsigned long)(&wd_dev.watchdog[i].regs->dcntr),
- * readw(&wd_dev.watchdog[i].regs->dcntr));
- */
- printk("\t%s%i: limit at 0x%lx: 0x%x\n",
- WD_OBPNAME,
- i,
- (unsigned long)(&wd_dev.watchdog[i].regs->limit),
- readw(&wd_dev.watchdog[i].regs->limit));
- printk("\t%s%i: status at 0x%lx: 0x%x\n",
- WD_OBPNAME,
- i,
- (unsigned long)(&wd_dev.watchdog[i].regs->status),
- readb(&wd_dev.watchdog[i].regs->status));
- printk("\t%s%i: driver status: 0x%x\n",
- WD_OBPNAME,
- i,
- wd_getstatus(&wd_dev.watchdog[i]));
- }
- printk("\tintr_mask at %p: 0x%x\n",
- wd_dev.regs + PLD_IMASK,
- readb(wd_dev.regs + PLD_IMASK));
- printk("\tpld_status at %p: 0x%x\n",
- wd_dev.regs + PLD_STATUS,
- readb(wd_dev.regs + PLD_STATUS));
-}
-#endif
-
-/* Enable or disable watchdog interrupts
- * Because of the CP1400 defect this should only be
- * called during initialzation or by wd_[start|stop]timer()
- *
- * pTimer - pointer to timer device, or NULL to indicate all timers
- * enable - non-zero to enable interrupts, zero to disable
- */
-static void wd_toggleintr(struct wd_timer* pTimer, int enable)
-{
- unsigned char curregs = wd_readb(wd_dev.regs + PLD_IMASK);
- unsigned char setregs =
- (NULL == pTimer) ?
- (WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) :
- (pTimer->intr_mask);
-
- (WD_INTR_ON == enable) ?
- (curregs &= ~setregs):
- (curregs |= setregs);
-
- wd_writeb(curregs, wd_dev.regs + PLD_IMASK);
- return;
-}
-
-/* Reset countdown timer with 'limit' value and continue countdown.
- * This will not start a stopped timer.
- *
- * pTimer - pointer to timer device
- */
-static void wd_pingtimer(struct wd_timer* pTimer)
-{
- if (wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) {
- wd_readw(pTimer->regs + WD_DCNTR);
- }
-}
-
-/* Stop a running watchdog timer-- the timer actually keeps
- * running, but the interrupt is masked so that no action is
- * taken upon expiration.
- *
- * pTimer - pointer to timer device
- */
-static void wd_stoptimer(struct wd_timer* pTimer)
-{
- if(wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) {
- wd_toggleintr(pTimer, WD_INTR_OFF);
-
- if(wd_dev.isbaddoggie) {
- pTimer->runstatus |= WD_STAT_BSTOP;
- wd_brokentimer((unsigned long)&wd_dev);
- }
- }
-}
-
-/* Start a watchdog timer with the specified limit value
- * If the watchdog is running, it will be restarted with
- * the provided limit value.
- *
- * This function will enable interrupts on the specified
- * watchdog.
- *
- * pTimer - pointer to timer device
- * limit - limit (countdown) value in 1/10th seconds
- */
-static void wd_starttimer(struct wd_timer* pTimer)
-{
- if(wd_dev.isbaddoggie) {
- pTimer->runstatus &= ~WD_STAT_BSTOP;
- }
- pTimer->runstatus &= ~WD_STAT_SVCD;
-
- wd_writew(pTimer->timeout, pTimer->regs + WD_LIMIT);
- wd_toggleintr(pTimer, WD_INTR_ON);
-}
-
-/* Restarts timer with maximum limit value and
- * does not unset 'brokenstop' value.
- */
-static void wd_resetbrokentimer(struct wd_timer* pTimer)
-{
- wd_toggleintr(pTimer, WD_INTR_ON);
- wd_writew(WD_BLIMIT, pTimer->regs + WD_LIMIT);
-}
-
-/* Timer device initialization helper.
- * Returns 0 on success, other on failure
- */
-static int wd_inittimer(int whichdog)
-{
- struct miscdevice *whichmisc;
- void __iomem *whichregs;
- char whichident[8];
- int whichmask;
- __u16 whichlimit;
-
- switch(whichdog)
- {
- case WD0_ID:
- whichmisc = &wd0_miscdev;
- strcpy(whichident, "RIC");
- whichregs = wd_dev.regs + WD0_OFF;
- whichmask = WD0_INTR_MASK;
- whichlimit= (0 == wd0_timeout) ?
- (wd_dev.opt_timeout):
- (wd0_timeout);
- break;
- case WD1_ID:
- whichmisc = &wd1_miscdev;
- strcpy(whichident, "XIR");
- whichregs = wd_dev.regs + WD1_OFF;
- whichmask = WD1_INTR_MASK;
- whichlimit= (0 == wd1_timeout) ?
- (wd_dev.opt_timeout):
- (wd1_timeout);
- break;
- case WD2_ID:
- whichmisc = &wd2_miscdev;
- strcpy(whichident, "POR");
- whichregs = wd_dev.regs + WD2_OFF;
- whichmask = WD2_INTR_MASK;
- whichlimit= (0 == wd2_timeout) ?
- (wd_dev.opt_timeout):
- (wd2_timeout);
- break;
- default:
- printk("%s: %s: invalid watchdog id: %i\n",
- WD_OBPNAME, __func__, whichdog);
- return(1);
- }
- if(0 != misc_register(whichmisc))
- {
- return(1);
- }
- wd_dev.watchdog[whichdog].regs = whichregs;
- wd_dev.watchdog[whichdog].timeout = whichlimit;
- wd_dev.watchdog[whichdog].intr_mask = whichmask;
- wd_dev.watchdog[whichdog].runstatus &= ~WD_STAT_BSTOP;
- wd_dev.watchdog[whichdog].runstatus |= WD_STAT_INIT;
-
- printk("%s%i: %s hardware watchdog [%01i.%i sec] %s\n",
- WD_OBPNAME,
- whichdog,
- whichident,
- wd_dev.watchdog[whichdog].timeout / 10,
- wd_dev.watchdog[whichdog].timeout % 10,
- (0 != wd_dev.opt_enable) ? "in ENABLED mode" : "");
- return(0);
-}
-
-/* Timer method called to reset stopped watchdogs--
- * because of the PLD bug on CP1400, we cannot mask
- * interrupts within the PLD so me must continually
- * reset the timers ad infinitum.
- */
-static void wd_brokentimer(unsigned long data)
-{
- struct wd_device* pDev = (struct wd_device*)data;
- int id, tripped = 0;
-
- /* kill a running timer instance, in case we
- * were called directly instead of by kernel timer
- */
- if(timer_pending(&wd_timer)) {
- del_timer(&wd_timer);
- }
-
- for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
- if(pDev->watchdog[id].runstatus & WD_STAT_BSTOP) {
- ++tripped;
- wd_resetbrokentimer(&pDev->watchdog[id]);
- }
- }
-
- if(tripped) {
- /* there is at least one timer brokenstopped-- reschedule */
- init_timer(&wd_timer);
- wd_timer.expires = WD_BTIMEOUT;
- add_timer(&wd_timer);
- }
-}
-
-static int wd_getstatus(struct wd_timer* pTimer)
-{
- unsigned char stat = wd_readb(pTimer->regs + WD_STATUS);
- unsigned char intr = wd_readb(wd_dev.regs + PLD_IMASK);
- unsigned char ret = WD_STOPPED;
-
- /* determine STOPPED */
- if(0 == stat ) {
- return(ret);
- }
- /* determine EXPIRED vs FREERUN vs RUNNING */
- else if(WD_S_EXPIRED & stat) {
- ret = WD_EXPIRED;
- }
- else if(WD_S_RUNNING & stat) {
- if(intr & pTimer->intr_mask) {
- ret = WD_FREERUN;
- }
- else {
- /* Fudge WD_EXPIRED status for defective CP1400--
- * IF timer is running
- * AND brokenstop is set
- * AND an interrupt has been serviced
- * we are WD_EXPIRED.
- *
- * IF timer is running
- * AND brokenstop is set
- * AND no interrupt has been serviced
- * we are WD_FREERUN.
- */
- if(wd_dev.isbaddoggie && (pTimer->runstatus & WD_STAT_BSTOP)) {
- if(pTimer->runstatus & WD_STAT_SVCD) {
- ret = WD_EXPIRED;
- }
- else {
- /* we could as well pretend we are expired */
- ret = WD_FREERUN;
- }
- }
- else {
- ret = WD_RUNNING;
- }
- }
- }
-
- /* determine SERVICED */
- if(pTimer->runstatus & WD_STAT_SVCD) {
- ret |= WD_SERVICED;
- }
-
- return(ret);
-}
-
-static int __init wd_init(void)
-{
- int id;
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->ofdev.node->name, WD_OBPNAME))
- goto ebus_done;
- }
- }
-
-ebus_done:
- if(!edev) {
- printk("%s: unable to locate device\n", WD_OBPNAME);
- return -ENODEV;
- }
-
- wd_dev.regs =
- ioremap(edev->resource[0].start, 4 * WD_TIMER_REGSZ); /* ? */
-
- if(NULL == wd_dev.regs) {
- printk("%s: unable to map registers\n", WD_OBPNAME);
- return(-ENODEV);
- }
-
- /* initialize device structure from OBP parameters */
- wd_dev.irq = edev->irqs[0];
- wd_dev.opt_enable = wd_opt_enable();
- wd_dev.opt_reboot = wd_opt_reboot();
- wd_dev.opt_timeout = wd_opt_timeout();
- wd_dev.isbaddoggie = wd_isbroken();
-
- /* disable all interrupts unless watchdog-enabled? == true */
- if(! wd_dev.opt_enable) {
- wd_toggleintr(NULL, WD_INTR_OFF);
- }
-
- /* register miscellaneous devices */
- for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
- if(0 != wd_inittimer(id)) {
- printk("%s%i: unable to initialize\n", WD_OBPNAME, id);
- }
- }
-
- /* warn about possible defective PLD */
- if(wd_dev.isbaddoggie) {
- init_timer(&wd_timer);
- wd_timer.function = wd_brokentimer;
- wd_timer.data = (unsigned long)&wd_dev;
- wd_timer.expires = WD_BTIMEOUT;
-
- printk("%s: PLD defect workaround enabled for model %s\n",
- WD_OBPNAME, WD_BADMODEL);
- }
- return(0);
-}
-
-static void __exit wd_cleanup(void)
-{
- int id;
-
- /* if 'watchdog-enable?' == TRUE, timers are not stopped
- * when module is unloaded. All brokenstopped timers will
- * also now eventually trip.
- */
- for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
- if(WD_S_RUNNING == wd_readb(wd_dev.watchdog[id].regs + WD_STATUS)) {
- if(wd_dev.opt_enable) {
- printk(KERN_WARNING "%s%i: timer not stopped at release\n",
- WD_OBPNAME, id);
- }
- else {
- wd_stoptimer(&wd_dev.watchdog[id]);
- if(wd_dev.watchdog[id].runstatus & WD_STAT_BSTOP) {
- wd_resetbrokentimer(&wd_dev.watchdog[id]);
- printk(KERN_WARNING
- "%s%i: defect workaround disabled at release, "\
- "timer expires in ~%01i sec\n",
- WD_OBPNAME, id,
- wd_readw(wd_dev.watchdog[id].regs + WD_LIMIT) / 10);
- }
- }
- }
- }
-
- if(wd_dev.isbaddoggie && timer_pending(&wd_timer)) {
- del_timer(&wd_timer);
- }
- if(0 != (wd_dev.watchdog[WD0_ID].runstatus & WD_STAT_INIT)) {
- misc_deregister(&wd0_miscdev);
- }
- if(0 != (wd_dev.watchdog[WD1_ID].runstatus & WD_STAT_INIT)) {
- misc_deregister(&wd1_miscdev);
- }
- if(0 != (wd_dev.watchdog[WD2_ID].runstatus & WD_STAT_INIT)) {
- misc_deregister(&wd2_miscdev);
- }
- if(0 != wd_dev.initialized) {
- free_irq(wd_dev.irq, (void *)wd_dev.regs);
- }
- iounmap(wd_dev.regs);
-}
-
-module_init(wd_init);
-module_exit(wd_cleanup);
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index d8f5c0ca236..2550af4ae43 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -1,10 +1,7 @@
-/* $Id: display7seg.c,v 1.6 2002/01/08 16:00:16 davem Exp $
- *
- * display7seg - Driver implementation for the 7-segment display
- * present on Sun Microsystems CP1400 and CP1500
+/* display7seg.c - Driver implementation for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
*
* Copyright (c) 2000 Eric Brower (ebrower@usa.net)
- *
*/
#include <linux/kernel.h>
@@ -16,22 +13,20 @@
#include <linux/miscdevice.h>
#include <linux/ioport.h> /* request_region */
#include <linux/smp_lock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/atomic.h>
-#include <asm/ebus.h> /* EBus device */
-#include <asm/oplib.h> /* OpenProm Library */
#include <asm/uaccess.h> /* put_/get_user */
#include <asm/io.h>
#include <asm/display7seg.h>
#define D7S_MINOR 193
-#define D7S_OBPNAME "display7seg"
-#define D7S_DEVNAME "d7s"
+#define DRIVER_NAME "d7s"
+#define PFX DRIVER_NAME ": "
static int sol_compat = 0; /* Solaris compatibility mode */
-#ifdef MODULE
-
/* Solaris compatibility flag -
* The Solaris implementation omits support for several
* documented driver features (ref Sun doc 806-0180-03).
@@ -46,20 +41,20 @@ static int sol_compat = 0; /* Solaris compatibility mode */
* If you wish the device to operate as under Solaris,
* omitting above features, set this parameter to non-zero.
*/
-module_param
- (sol_compat, int, 0);
-MODULE_PARM_DESC
- (sol_compat,
- "Disables documented functionality omitted from Solaris driver");
-
-MODULE_AUTHOR
- ("Eric Brower <ebrower@usa.net>");
-MODULE_DESCRIPTION
- ("7-Segment Display driver for Sun Microsystems CP1400/1500");
+module_param(sol_compat, int, 0);
+MODULE_PARM_DESC(sol_compat,
+ "Disables documented functionality omitted from Solaris driver");
+
+MODULE_AUTHOR("Eric Brower <ebrower@usa.net>");
+MODULE_DESCRIPTION("7-Segment Display driver for Sun Microsystems CP1400/1500");
MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE
- ("d7s");
-#endif /* ifdef MODULE */
+MODULE_SUPPORTED_DEVICE("d7s");
+
+struct d7s {
+ void __iomem *regs;
+ bool flipped;
+};
+struct d7s *d7s_device;
/*
* Register block address- see header for details
@@ -72,22 +67,6 @@ MODULE_SUPPORTED_DEVICE
* FLIP - Inverts display for upside-down mounted board
* bits 0-4 - 7-segment display contents
*/
-static void __iomem* d7s_regs;
-
-static inline void d7s_free(void)
-{
- iounmap(d7s_regs);
-}
-
-static inline int d7s_obpflipped(void)
-{
- int opt_node;
-
- opt_node = prom_getchild(prom_root_node);
- opt_node = prom_searchsiblings(opt_node, "options");
- return ((-1 != prom_getintdefault(opt_node, "d7s-flipped?", -1)) ? 0 : 1);
-}
-
static atomic_t d7s_users = ATOMIC_INIT(0);
static int d7s_open(struct inode *inode, struct file *f)
@@ -106,12 +85,15 @@ static int d7s_release(struct inode *inode, struct file *f)
* are not operating in solaris-compat mode
*/
if (atomic_dec_and_test(&d7s_users) && !sol_compat) {
- int regval = 0;
-
- regval = readb(d7s_regs);
- (0 == d7s_obpflipped()) ?
- writeb(regval |= D7S_FLIP, d7s_regs):
- writeb(regval &= ~D7S_FLIP, d7s_regs);
+ struct d7s *p = d7s_device;
+ u8 regval = 0;
+
+ regval = readb(p->regs);
+ if (p->flipped)
+ regval |= D7S_FLIP;
+ else
+ regval &= ~D7S_FLIP;
+ writeb(regval, p->regs);
}
return 0;
@@ -119,9 +101,10 @@ static int d7s_release(struct inode *inode, struct file *f)
static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- __u8 regs = readb(d7s_regs);
- __u8 ireg = 0;
+ struct d7s *p = d7s_device;
+ u8 regs = readb(p->regs);
int error = 0;
+ u8 ireg = 0;
if (D7S_MINOR != iminor(file->f_path.dentry->d_inode))
return -ENODEV;
@@ -129,18 +112,20 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
lock_kernel();
switch (cmd) {
case D7SIOCWR:
- /* assign device register values
- * we mask-out D7S_FLIP if in sol_compat mode
+ /* assign device register values we mask-out D7S_FLIP
+ * if in sol_compat mode
*/
if (get_user(ireg, (int __user *) arg)) {
error = -EFAULT;
break;
}
- if (0 != sol_compat) {
- (regs & D7S_FLIP) ?
- (ireg |= D7S_FLIP) : (ireg &= ~D7S_FLIP);
+ if (sol_compat) {
+ if (regs & D7S_FLIP)
+ ireg |= D7S_FLIP;
+ else
+ ireg &= ~D7S_FLIP;
}
- writeb(ireg, d7s_regs);
+ writeb(ireg, p->regs);
break;
case D7SIOCRD:
@@ -158,9 +143,11 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case D7SIOCTM:
/* toggle device mode-- flip display orientation */
- (regs & D7S_FLIP) ?
- (regs &= ~D7S_FLIP) : (regs |= D7S_FLIP);
- writeb(regs, d7s_regs);
+ if (regs & D7S_FLIP)
+ regs &= ~D7S_FLIP;
+ else
+ regs |= D7S_FLIP;
+ writeb(regs, p->regs);
break;
};
unlock_kernel();
@@ -176,69 +163,123 @@ static const struct file_operations d7s_fops = {
.release = d7s_release,
};
-static struct miscdevice d7s_miscdev = { D7S_MINOR, D7S_DEVNAME, &d7s_fops };
+static struct miscdevice d7s_miscdev = {
+ .minor = D7S_MINOR,
+ .name = DRIVER_NAME,
+ .fops = &d7s_fops
+};
-static int __init d7s_init(void)
+static int __devinit d7s_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
- int iTmp = 0, regs = 0;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, D7S_OBPNAME))
- goto ebus_done;
- }
+ struct device_node *opts;
+ int err = -EINVAL;
+ struct d7s *p;
+ u8 regs;
+
+ if (d7s_device)
+ goto out;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ err = -ENOMEM;
+ if (!p)
+ goto out;
+
+ p->regs = of_ioremap(&op->resource[0], 0, sizeof(u8), "d7s");
+ if (!p->regs) {
+ printk(KERN_ERR PFX "Cannot map chip registers\n");
+ goto out_free;
}
-ebus_done:
- if(!edev) {
- printk("%s: unable to locate device\n", D7S_DEVNAME);
- return -ENODEV;
+ err = misc_register(&d7s_miscdev);
+ if (err) {
+ printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n",
+ D7S_MINOR);
+ goto out_iounmap;
}
- d7s_regs = ioremap(edev->resource[0].start, sizeof(__u8));
-
- iTmp = misc_register(&d7s_miscdev);
- if (0 != iTmp) {
- printk("%s: unable to acquire miscdevice minor %i\n",
- D7S_DEVNAME, D7S_MINOR);
- iounmap(d7s_regs);
- return iTmp;
- }
-
- /* OBP option "d7s-flipped?" is honored as default
- * for the device, and reset default when detached
+ /* OBP option "d7s-flipped?" is honored as default for the
+ * device, and reset default when detached
*/
- regs = readb(d7s_regs);
- iTmp = d7s_obpflipped();
- (0 == iTmp) ?
- writeb(regs |= D7S_FLIP, d7s_regs):
- writeb(regs &= ~D7S_FLIP, d7s_regs);
-
- printk("%s: 7-Segment Display%s at 0x%lx %s\n",
- D7S_DEVNAME,
- (0 == iTmp) ? (" (FLIPPED)") : (""),
- edev->resource[0].start,
- (0 != sol_compat) ? ("in sol_compat mode") : (""));
-
- return 0;
+ regs = readb(p->regs);
+ opts = of_find_node_by_path("/options");
+ if (opts &&
+ of_get_property(opts, "d7s-flipped?", NULL))
+ p->flipped = true;
+
+ if (p->flipped)
+ regs |= D7S_FLIP;
+ else
+ regs &= ~D7S_FLIP;
+
+ writeb(regs, p->regs);
+
+ printk(KERN_INFO PFX "7-Segment Display%s at [%s:0x%lx] %s\n",
+ op->node->full_name,
+ (regs & D7S_FLIP) ? " (FLIPPED)" : "",
+ op->resource[0].start,
+ sol_compat ? "in sol_compat mode" : "");
+
+ dev_set_drvdata(&op->dev, p);
+ d7s_device = p;
+ err = 0;
+
+out:
+ return err;
+
+out_iounmap:
+ of_iounmap(&op->resource[0], p->regs, sizeof(u8));
+
+out_free:
+ kfree(p);
+ goto out;
}
-static void __exit d7s_cleanup(void)
+static int __devexit d7s_remove(struct of_device *op)
{
- int regs = readb(d7s_regs);
+ struct d7s *p = dev_get_drvdata(&op->dev);
+ u8 regs = readb(p->regs);
/* Honor OBP d7s-flipped? unless operating in solaris-compat mode */
- if (0 == sol_compat) {
- (0 == d7s_obpflipped()) ?
- writeb(regs |= D7S_FLIP, d7s_regs):
- writeb(regs &= ~D7S_FLIP, d7s_regs);
+ if (sol_compat) {
+ if (p->flipped)
+ regs |= D7S_FLIP;
+ else
+ regs &= ~D7S_FLIP;
+ writeb(regs, p->regs);
}
misc_deregister(&d7s_miscdev);
- d7s_free();
+ of_iounmap(&op->resource[0], p->regs, sizeof(u8));
+ kfree(p);
+
+ return 0;
+}
+
+static const struct of_device_id d7s_match[] = {
+ {
+ .name = "display7seg",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, d7s_match);
+
+static struct of_platform_driver d7s_driver = {
+ .name = DRIVER_NAME,
+ .match_table = d7s_match,
+ .probe = d7s_probe,
+ .remove = __devexit_p(d7s_remove),
+};
+
+static int __init d7s_init(void)
+{
+ return of_register_driver(&d7s_driver, &of_bus_type);
+}
+
+static void __exit d7s_exit(void)
+{
+ of_unregister_driver(&d7s_driver);
}
module_init(d7s_init);
-module_exit(d7s_cleanup);
+module_exit(d7s_exit);
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index a408402426f..58e583b61e6 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -1,5 +1,4 @@
-/* $Id: envctrl.c,v 1.25 2002/01/15 09:01:26 davem Exp $
- * envctrl.c: Temperature and Fan monitoring on Machines providing it.
+/* envctrl.c: Temperature and Fan monitoring on Machines providing it.
*
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com)
@@ -28,12 +27,16 @@
#include <linux/kmod.h>
#include <linux/reboot.h>
#include <linux/smp_lock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
-#include <asm/ebus.h>
#include <asm/uaccess.h>
#include <asm/envctrl.h>
#include <asm/io.h>
+#define DRIVER_NAME "envctrl"
+#define PFX DRIVER_NAME ": "
+
#define ENVCTRL_MINOR 162
#define PCF8584_ADDRESS 0x55
@@ -193,7 +196,7 @@ static void envtrl_i2c_test_pin(void)
}
if (limit <= 0)
- printk(KERN_INFO "envctrl: Pin status will not clear.\n");
+ printk(KERN_INFO PFX "Pin status will not clear.\n");
}
/* Function Description: Test busy bit.
@@ -211,7 +214,7 @@ static void envctrl_i2c_test_bb(void)
}
if (limit <= 0)
- printk(KERN_INFO "envctrl: Busy bit will not clear.\n");
+ printk(KERN_INFO PFX "Busy bit will not clear.\n");
}
/* Function Description: Send the address for a read access.
@@ -858,11 +861,10 @@ static void envctrl_init_voltage_status(struct i2c_child_t *pchild)
/* Function Description: Initialize i2c child device.
* Return: None.
*/
-static void envctrl_init_i2c_child(struct linux_ebus_child *edev_child,
+static void envctrl_init_i2c_child(struct device_node *dp,
struct i2c_child_t *pchild)
{
int len, i, tbls_size = 0;
- struct device_node *dp = edev_child->prom_node;
const void *pval;
/* Get device address. */
@@ -882,12 +884,12 @@ static void envctrl_init_i2c_child(struct linux_ebus_child *edev_child,
pchild->tables = kmalloc(tbls_size, GFP_KERNEL);
if (pchild->tables == NULL){
- printk("envctrl: Failed to allocate table.\n");
+ printk(KERN_ERR PFX "Failed to allocate table.\n");
return;
}
pval = of_get_property(dp, "tables", &len);
if (!pval || len <= 0) {
- printk("envctrl: Failed to get table.\n");
+ printk(KERN_ERR PFX "Failed to get table.\n");
return;
}
memcpy(pchild->tables, pval, len);
@@ -993,14 +995,14 @@ static int kenvctrld(void *__unused)
struct i2c_child_t *cputemp;
if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) {
- printk(KERN_ERR
- "envctrl: kenvctrld unable to monitor CPU temp-- exiting\n");
+ printk(KERN_ERR PFX
+ "kenvctrld unable to monitor CPU temp-- exiting\n");
return -ENODEV;
}
poll_interval = 5000; /* TODO env_mon_interval */
- printk(KERN_INFO "envctrl: %s starting...\n", current->comm);
+ printk(KERN_INFO PFX "%s starting...\n", current->comm);
for (;;) {
msleep_interruptible(poll_interval);
@@ -1022,54 +1024,35 @@ static int kenvctrld(void *__unused)
}
}
}
- printk(KERN_INFO "envctrl: %s exiting...\n", current->comm);
+ printk(KERN_INFO PFX "%s exiting...\n", current->comm);
return 0;
}
-static int __init envctrl_init(void)
+static int __devinit envctrl_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
- struct linux_ebus_child *edev_child = NULL;
- int err, i = 0;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, "bbc")) {
- /* If we find a boot-bus controller node,
- * then this envctrl driver is not for us.
- */
- return -ENODEV;
- }
- }
- }
+ struct device_node *dp;
+ int index, err;
- /* Traverse through ebus and ebus device list for i2c device and
- * adc and gpio nodes.
- */
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, "i2c")) {
- i2c = ioremap(edev->resource[0].start, 0x2);
- for_each_edevchild(edev, edev_child) {
- if (!strcmp("gpio", edev_child->prom_node->name)) {
- i2c_childlist[i].i2ctype = I2C_GPIO;
- envctrl_init_i2c_child(edev_child, &(i2c_childlist[i++]));
- }
- if (!strcmp("adc", edev_child->prom_node->name)) {
- i2c_childlist[i].i2ctype = I2C_ADC;
- envctrl_init_i2c_child(edev_child, &(i2c_childlist[i++]));
- }
- }
- goto done;
- }
+ if (i2c)
+ return -EINVAL;
+
+ i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME);
+ if (!i2c)
+ return -ENOMEM;
+
+ index = 0;
+ dp = op->node->child;
+ while (dp) {
+ if (!strcmp(dp->name, "gpio")) {
+ i2c_childlist[index].i2ctype = I2C_GPIO;
+ envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
+ } else if (!strcmp(dp->name, "adc")) {
+ i2c_childlist[index].i2ctype = I2C_ADC;
+ envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
}
- }
-done:
- if (!edev) {
- printk("envctrl: I2C device not found.\n");
- return -ENODEV;
+ dp = dp->sibling;
}
/* Set device address. */
@@ -1087,7 +1070,7 @@ done:
/* Register the device as a minor miscellaneous device. */
err = misc_register(&envctrl_dev);
if (err) {
- printk("envctrl: Unable to get misc minor %d\n",
+ printk(KERN_ERR PFX "Unable to get misc minor %d\n",
envctrl_dev.minor);
goto out_iounmap;
}
@@ -1096,12 +1079,12 @@ done:
* a next child device, so we decrement before reverse-traversal of
* child devices.
*/
- printk("envctrl: initialized ");
- for (--i; i >= 0; --i) {
+ printk(KERN_INFO PFX "Initialized ");
+ for (--index; index >= 0; --index) {
printk("[%s 0x%lx]%s",
- (I2C_ADC == i2c_childlist[i].i2ctype) ? ("adc") :
- ((I2C_GPIO == i2c_childlist[i].i2ctype) ? ("gpio") : ("unknown")),
- i2c_childlist[i].addr, (0 == i) ? ("\n") : (" "));
+ (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" :
+ ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"),
+ i2c_childlist[index].addr, (0 == index) ? "\n" : " ");
}
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
@@ -1115,26 +1098,54 @@ done:
out_deregister:
misc_deregister(&envctrl_dev);
out_iounmap:
- iounmap(i2c);
- for (i = 0; i < ENVCTRL_MAX_CPU * 2; i++)
- kfree(i2c_childlist[i].tables);
+ of_iounmap(&op->resource[0], i2c, 0x2);
+ for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
+ kfree(i2c_childlist[index].tables);
return err;
}
-static void __exit envctrl_cleanup(void)
+static int __devexit envctrl_remove(struct of_device *op)
{
- int i;
+ int index;
kthread_stop(kenvctrld_task);
- iounmap(i2c);
+ of_iounmap(&op->resource[0], i2c, 0x2);
misc_deregister(&envctrl_dev);
- for (i = 0; i < ENVCTRL_MAX_CPU * 2; i++)
- kfree(i2c_childlist[i].tables);
+ for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
+ kfree(i2c_childlist[index].tables);
+
+ return 0;
+}
+
+static const struct of_device_id envctrl_match[] = {
+ {
+ .name = "i2c",
+ .compatible = "i2cpcf,8584",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, envctrl_match);
+
+static struct of_platform_driver envctrl_driver = {
+ .name = DRIVER_NAME,
+ .match_table = envctrl_match,
+ .probe = envctrl_probe,
+ .remove = __devexit_p(envctrl_remove),
+};
+
+static int __init envctrl_init(void)
+{
+ return of_register_driver(&envctrl_driver, &of_bus_type);
+}
+
+static void __exit envctrl_exit(void)
+{
+ of_unregister_driver(&envctrl_driver);
}
module_init(envctrl_init);
-module_exit(envctrl_cleanup);
+module_exit(envctrl_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 7d95e151513..41083472ff4 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -1,5 +1,4 @@
-/* $Id: flash.c,v 1.25 2001/12/21 04:56:16 davem Exp $
- * flash.c: Allow mmap access to the OBP Flash, for OBP updates.
+/* flash.c: Allow mmap access to the OBP Flash, for OBP updates.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
*/
@@ -15,13 +14,13 @@
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/sbus.h>
-#include <asm/ebus.h>
#include <asm/upa.h>
static DEFINE_SPINLOCK(flash_lock);
@@ -161,97 +160,68 @@ static const struct file_operations flash_fops = {
static struct miscdevice flash_dev = { FLASH_MINOR, "flash", &flash_fops };
-static int __init flash_init(void)
+static int __devinit flash_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- struct sbus_bus *sbus;
- struct sbus_dev *sdev = NULL;
-#ifdef CONFIG_PCI
- struct linux_ebus *ebus;
- struct linux_ebus_device *edev = NULL;
- struct linux_prom_registers regs[2];
- int len, nregs;
-#endif
- int err;
-
- for_all_sbusdev(sdev, sbus) {
- if (!strcmp(sdev->prom_name, "flashprom")) {
- if (sdev->reg_addrs[0].phys_addr == sdev->reg_addrs[1].phys_addr) {
- flash.read_base = ((unsigned long)sdev->reg_addrs[0].phys_addr) |
- (((unsigned long)sdev->reg_addrs[0].which_io)<<32UL);
- flash.read_size = sdev->reg_addrs[0].reg_size;
- flash.write_base = flash.read_base;
- flash.write_size = flash.read_size;
- } else {
- flash.read_base = ((unsigned long)sdev->reg_addrs[0].phys_addr) |
- (((unsigned long)sdev->reg_addrs[0].which_io)<<32UL);
- flash.read_size = sdev->reg_addrs[0].reg_size;
- flash.write_base = ((unsigned long)sdev->reg_addrs[1].phys_addr) |
- (((unsigned long)sdev->reg_addrs[1].which_io)<<32UL);
- flash.write_size = sdev->reg_addrs[1].reg_size;
- }
- flash.busy = 0;
- break;
- }
- }
- if (!sdev) {
-#ifdef CONFIG_PCI
- const struct linux_prom_registers *ebus_regs;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->prom_node->name, "flashprom"))
- goto ebus_done;
- }
- }
- ebus_done:
- if (!edev)
- return -ENODEV;
-
- ebus_regs = of_get_property(edev->prom_node, "reg", &len);
- if (!ebus_regs || (len % sizeof(regs[0])) != 0) {
- printk("flash: Strange reg property size %d\n", len);
- return -ENODEV;
- }
-
- nregs = len / sizeof(ebus_regs[0]);
+ struct device_node *dp = op->node;
+ struct device_node *parent;
- flash.read_base = edev->resource[0].start;
- flash.read_size = ebus_regs[0].reg_size;
+ parent = dp->parent;
- if (nregs == 1) {
- flash.write_base = edev->resource[0].start;
- flash.write_size = ebus_regs[0].reg_size;
- } else if (nregs == 2) {
- flash.write_base = edev->resource[1].start;
- flash.write_size = ebus_regs[1].reg_size;
- } else {
- printk("flash: Strange number of regs %d\n", nregs);
- return -ENODEV;
- }
-
- flash.busy = 0;
-
-#else
+ if (strcmp(parent->name, "sbus") &&
+ strcmp(parent->name, "sbi") &&
+ strcmp(parent->name, "ebus"))
return -ENODEV;
-#endif
+
+ flash.read_base = op->resource[0].start;
+ flash.read_size = resource_size(&op->resource[0]);
+ if (op->resource[1].flags) {
+ flash.write_base = op->resource[1].start;
+ flash.write_size = resource_size(&op->resource[1]);
+ } else {
+ flash.write_base = op->resource[0].start;
+ flash.write_size = resource_size(&op->resource[0]);
}
+ flash.busy = 0;
- printk("OBP Flash: RD %lx[%lx] WR %lx[%lx]\n",
+ printk(KERN_INFO "%s: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n",
+ op->node->full_name,
flash.read_base, flash.read_size,
flash.write_base, flash.write_size);
- err = misc_register(&flash_dev);
- if (err) {
- printk(KERN_ERR "flash: unable to get misc minor\n");
- return err;
- }
+ return misc_register(&flash_dev);
+}
+
+static int __devexit flash_remove(struct of_device *op)
+{
+ misc_deregister(&flash_dev);
return 0;
}
+static const struct of_device_id flash_match[] = {
+ {
+ .name = "flashprom",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, flash_match);
+
+static struct of_platform_driver flash_driver = {
+ .name = "flash",
+ .match_table = flash_match,
+ .probe = flash_probe,
+ .remove = __devexit_p(flash_remove),
+};
+
+static int __init flash_init(void)
+{
+ return of_register_driver(&flash_driver, &of_bus_type);
+}
+
static void __exit flash_cleanup(void)
{
- misc_deregister(&flash_dev);
+ of_unregister_driver(&flash_driver);
}
module_init(flash_init);
diff --git a/drivers/sbus/char/riowatchdog.c b/drivers/sbus/char/riowatchdog.c
deleted file mode 100644
index 88c0fc6395e..00000000000
--- a/drivers/sbus/char/riowatchdog.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/* $Id: riowatchdog.c,v 1.3.2.2 2002/01/23 18:48:02 davem Exp $
- * riowatchdog.c - driver for hw watchdog inside Super I/O of RIO
- *
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-#include <asm/io.h>
-#include <asm/ebus.h>
-#include <asm/bbc.h>
-#include <asm/oplib.h>
-#include <asm/uaccess.h>
-
-#include <asm/watchdog.h>
-
-/* RIO uses the NatSemi Super I/O power management logical device
- * as its' watchdog.
- *
- * When the watchdog triggers, it asserts a line to the BBC (Boot Bus
- * Controller) of the machine. The BBC can only be configured to
- * trigger a power-on reset when the signal is asserted. The BBC
- * can be configured to ignore the signal entirely as well.
- *
- * The only Super I/O device register we care about is at index
- * 0x05 (WDTO_INDEX) which is the watchdog time-out in minutes (1-255).
- * If set to zero, this disables the watchdog. When set, the system
- * must periodically (before watchdog expires) clear (set to zero) and
- * re-set the watchdog else it will trigger.
- *
- * There are two other indexed watchdog registers inside this Super I/O
- * logical device, but they are unused. The first, at index 0x06 is
- * the watchdog control and can be used to make the watchdog timer re-set
- * when the PS/2 mouse or serial lines show activity. The second, at
- * index 0x07 is merely a sampling of the line from the watchdog to the
- * BBC.
- *
- * The watchdog device generates no interrupts.
- */
-
-MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("Hardware watchdog driver for Sun RIO");
-MODULE_SUPPORTED_DEVICE("watchdog");
-MODULE_LICENSE("GPL");
-
-#define RIOWD_NAME "pmc"
-#define RIOWD_MINOR 215
-
-static DEFINE_SPINLOCK(riowd_lock);
-
-static void __iomem *bbc_regs;
-static void __iomem *riowd_regs;
-#define WDTO_INDEX 0x05
-
-static int riowd_timeout = 1; /* in minutes */
-module_param(riowd_timeout, int, 0);
-MODULE_PARM_DESC(riowd_timeout, "Watchdog timeout in minutes");
-
-#if 0 /* Currently unused. */
-static u8 riowd_readreg(int index)
-{
- unsigned long flags;
- u8 ret;
-
- spin_lock_irqsave(&riowd_lock, flags);
- writeb(index, riowd_regs + 0);
- ret = readb(riowd_regs + 1);
- spin_unlock_irqrestore(&riowd_lock, flags);
-
- return ret;
-}
-#endif
-
-static void riowd_writereg(u8 val, int index)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&riowd_lock, flags);
- writeb(index, riowd_regs + 0);
- writeb(val, riowd_regs + 1);
- spin_unlock_irqrestore(&riowd_lock, flags);
-}
-
-static void riowd_pingtimer(void)
-{
- riowd_writereg(riowd_timeout, WDTO_INDEX);
-}
-
-static void riowd_stoptimer(void)
-{
- u8 val;
-
- riowd_writereg(0, WDTO_INDEX);
-
- val = readb(bbc_regs + BBC_WDACTION);
- val &= ~BBC_WDACTION_RST;
- writeb(val, bbc_regs + BBC_WDACTION);
-}
-
-static void riowd_starttimer(void)
-{
- u8 val;
-
- riowd_writereg(riowd_timeout, WDTO_INDEX);
-
- val = readb(bbc_regs + BBC_WDACTION);
- val |= BBC_WDACTION_RST;
- writeb(val, bbc_regs + BBC_WDACTION);
-}
-
-static int riowd_open(struct inode *inode, struct file *filp)
-{
- cycle_kernel_lock();
- nonseekable_open(inode, filp);
- return 0;
-}
-
-static int riowd_release(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-static int riowd_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- static struct watchdog_info info = {
- WDIOF_SETTIMEOUT, 0, "Natl. Semiconductor PC97317"
- };
- void __user *argp = (void __user *)arg;
- unsigned int options;
- int new_margin;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &info, sizeof(info)))
- return -EFAULT;
- break;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- if (put_user(0, (int __user *)argp))
- return -EFAULT;
- break;
-
- case WDIOC_KEEPALIVE:
- riowd_pingtimer();
- break;
-
- case WDIOC_SETOPTIONS:
- if (copy_from_user(&options, argp, sizeof(options)))
- return -EFAULT;
-
- if (options & WDIOS_DISABLECARD)
- riowd_stoptimer();
- else if (options & WDIOS_ENABLECARD)
- riowd_starttimer();
- else
- return -EINVAL;
-
- break;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, (int __user *)argp))
- return -EFAULT;
- if ((new_margin < 60) || (new_margin > (255 * 60)))
- return -EINVAL;
- riowd_timeout = (new_margin + 59) / 60;
- riowd_pingtimer();
- /* Fall */
-
- case WDIOC_GETTIMEOUT:
- return put_user(riowd_timeout * 60, (int __user *)argp);
-
- default:
- return -EINVAL;
- };
-
- return 0;
-}
-
-static ssize_t riowd_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
-{
- if (count) {
- riowd_pingtimer();
- return 1;
- }
-
- return 0;
-}
-
-static const struct file_operations riowd_fops = {
- .owner = THIS_MODULE,
- .ioctl = riowd_ioctl,
- .open = riowd_open,
- .write = riowd_write,
- .release = riowd_release,
-};
-
-static struct miscdevice riowd_miscdev = { RIOWD_MINOR, RIOWD_NAME, &riowd_fops };
-
-static int __init riowd_bbc_init(void)
-{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
- u8 val;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->ofdev.node->name, "bbc"))
- goto found_bbc;
- }
- }
-
-found_bbc:
- if (!edev)
- return -ENODEV;
- bbc_regs = ioremap(edev->resource[0].start, BBC_REGS_SIZE);
- if (!bbc_regs)
- return -ENODEV;
-
- /* Turn it off. */
- val = readb(bbc_regs + BBC_WDACTION);
- val &= ~BBC_WDACTION_RST;
- writeb(val, bbc_regs + BBC_WDACTION);
-
- return 0;
-}
-
-static int __init riowd_init(void)
-{
- struct linux_ebus *ebus = NULL;
- struct linux_ebus_device *edev = NULL;
-
- for_each_ebus(ebus) {
- for_each_ebusdev(edev, ebus) {
- if (!strcmp(edev->ofdev.node->name, RIOWD_NAME))
- goto ebus_done;
- }
- }
-
-ebus_done:
- if (!edev)
- goto fail;
-
- riowd_regs = ioremap(edev->resource[0].start, 2);
- if (riowd_regs == NULL) {
- printk(KERN_ERR "pmc: Cannot map registers.\n");
- return -ENODEV;
- }
-
- if (riowd_bbc_init()) {
- printk(KERN_ERR "pmc: Failure initializing BBC config.\n");
- goto fail;
- }
-
- if (misc_register(&riowd_miscdev)) {
- printk(KERN_ERR "pmc: Cannot register watchdog misc device.\n");
- goto fail;
- }
-
- printk(KERN_INFO "pmc: Hardware watchdog [%i minutes], "
- "regs at %p\n", riowd_timeout, riowd_regs);
-
- return 0;
-
-fail:
- if (riowd_regs) {
- iounmap(riowd_regs);
- riowd_regs = NULL;
- }
- if (bbc_regs) {
- iounmap(bbc_regs);
- bbc_regs = NULL;
- }
- return -ENODEV;
-}
-
-static void __exit riowd_cleanup(void)
-{
- misc_deregister(&riowd_miscdev);
- iounmap(riowd_regs);
- riowd_regs = NULL;
- iounmap(bbc_regs);
- bbc_regs = NULL;
-}
-
-module_init(riowd_init);
-module_exit(riowd_cleanup);
diff --git a/drivers/sbus/char/rtc.c b/drivers/sbus/char/rtc.c
deleted file mode 100644
index b0429917154..00000000000
--- a/drivers/sbus/char/rtc.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* $Id: rtc.c,v 1.28 2001/10/08 22:19:51 davem Exp $
- *
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * This is a little driver that lets a user-level program access
- * the SPARC Mostek real time clock chip. It is no use unless you
- * use the modified clock utility.
- *
- * Get the modified clock utility from:
- * ftp://vger.kernel.org/pub/linux/Sparc/userland/clock.c
- */
-
-#include <linux/module.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/fcntl.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mostek.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-static int rtc_busy = 0;
-
-/* This is the structure layout used by drivers/char/rtc.c, we
- * support that driver's ioctls so that things are less messy in
- * userspace.
- */
-struct rtc_time_generic {
- int tm_sec;
- int tm_min;
- int tm_hour;
- int tm_mday;
- int tm_mon;
- int tm_year;
- int tm_wday;
- int tm_yday;
- int tm_isdst;
-};
-#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
-#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
-#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
-#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
-#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
-#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
-#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
-#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
-#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time_generic) /* Read RTC time */
-#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time_generic) /* Set RTC time */
-#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
-#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
-#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
-#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
-#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
-#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
-#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-/* Retrieve the current date and time from the real time clock. */
-static void get_rtc_time(struct rtc_time *t)
-{
- void __iomem *regs = mstk48t02_regs;
- u8 tmp;
-
- spin_lock_irq(&mostek_lock);
-
- tmp = mostek_read(regs + MOSTEK_CREG);
- tmp |= MSTK_CREG_READ;
- mostek_write(regs + MOSTEK_CREG, tmp);
-
- t->sec = MSTK_REG_SEC(regs);
- t->min = MSTK_REG_MIN(regs);
- t->hour = MSTK_REG_HOUR(regs);
- t->dow = MSTK_REG_DOW(regs);
- t->dom = MSTK_REG_DOM(regs);
- t->month = MSTK_REG_MONTH(regs);
- t->year = MSTK_CVT_YEAR( MSTK_REG_YEAR(regs) );
-
- tmp = mostek_read(regs + MOSTEK_CREG);
- tmp &= ~MSTK_CREG_READ;
- mostek_write(regs + MOSTEK_CREG, tmp);
-
- spin_unlock_irq(&mostek_lock);
-}
-
-/* Set the current date and time inthe real time clock. */
-void set_rtc_time(struct rtc_time *t)
-{
- void __iomem *regs = mstk48t02_regs;
- u8 tmp;
-
- spin_lock_irq(&mostek_lock);
-
- tmp = mostek_read(regs + MOSTEK_CREG);
- tmp |= MSTK_CREG_WRITE;
- mostek_write(regs + MOSTEK_CREG, tmp);
-
- MSTK_SET_REG_SEC(regs,t->sec);
- MSTK_SET_REG_MIN(regs,t->min);
- MSTK_SET_REG_HOUR(regs,t->hour);
- MSTK_SET_REG_DOW(regs,t->dow);
- MSTK_SET_REG_DOM(regs,t->dom);
- MSTK_SET_REG_MONTH(regs,t->month);
- MSTK_SET_REG_YEAR(regs,t->year - MSTK_YEAR_ZERO);
-
- tmp = mostek_read(regs + MOSTEK_CREG);
- tmp &= ~MSTK_CREG_WRITE;
- mostek_write(regs + MOSTEK_CREG, tmp);
-
- spin_unlock_irq(&mostek_lock);
-}
-
-static int put_rtc_time_generic(void __user *argp, struct rtc_time *tm)
-{
- struct rtc_time_generic __user *utm = argp;
-
- if (__put_user(tm->sec, &utm->tm_sec) ||
- __put_user(tm->min, &utm->tm_min) ||
- __put_user(tm->hour, &utm->tm_hour) ||
- __put_user(tm->dom, &utm->tm_mday) ||
- __put_user(tm->month, &utm->tm_mon) ||
- __put_user(tm->year, &utm->tm_year) ||
- __put_user(tm->dow, &utm->tm_wday) ||
- __put_user(0, &utm->tm_yday) ||
- __put_user(0, &utm->tm_isdst))
- return -EFAULT;
-
- return 0;
-}
-
-static int get_rtc_time_generic(struct rtc_time *tm, void __user *argp)
-{
- struct rtc_time_generic __user *utm = argp;
-
- if (__get_user(tm->sec, &utm->tm_sec) ||
- __get_user(tm->min, &utm->tm_min) ||
- __get_user(tm->hour, &utm->tm_hour) ||
- __get_user(tm->dom, &utm->tm_mday) ||
- __get_user(tm->month, &utm->tm_mon) ||
- __get_user(tm->year, &utm->tm_year) ||
- __get_user(tm->dow, &utm->tm_wday))
- return -EFAULT;
-
- return 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- struct rtc_time rtc_tm;
- void __user *argp = (void __user *)arg;
-
- switch (cmd) {
- /* No interrupt support, return an error
- * compatible with drivers/char/rtc.c
- */
- case RTC_AIE_OFF:
- case RTC_AIE_ON:
- case RTC_PIE_OFF:
- case RTC_PIE_ON:
- case RTC_UIE_OFF:
- case RTC_UIE_ON:
- case RTC_IRQP_READ:
- case RTC_IRQP_SET:
- case RTC_EPOCH_SET:
- case RTC_EPOCH_READ:
- return -EINVAL;
-
- case RTCGET:
- case RTC_RD_TIME:
- memset(&rtc_tm, 0, sizeof(struct rtc_time));
- get_rtc_time(&rtc_tm);
-
- if (cmd == RTCGET) {
- if (copy_to_user(argp, &rtc_tm,
- sizeof(struct rtc_time)))
- return -EFAULT;
- } else if (put_rtc_time_generic(argp, &rtc_tm))
- return -EFAULT;
-
- return 0;
-
-
- case RTCSET:
- case RTC_SET_TIME:
- if (!capable(CAP_SYS_TIME))
- return -EPERM;
-
- if (cmd == RTCSET) {
- if (copy_from_user(&rtc_tm, argp,
- sizeof(struct rtc_time)))
- return -EFAULT;
- } else if (get_rtc_time_generic(&rtc_tm, argp))
- return -EFAULT;
-
- set_rtc_time(&rtc_tm);
-
- return 0;
-
- default:
- return -EINVAL;
- }
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
- int ret;
-
- lock_kernel();
- spin_lock_irq(&mostek_lock);
- if (rtc_busy) {
- ret = -EBUSY;
- } else {
- rtc_busy = 1;
- ret = 0;
- }
- spin_unlock_irq(&mostek_lock);
- unlock_kernel();
-
- return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
- rtc_busy = 0;
-
- return 0;
-}
-
-static const struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .ioctl = rtc_ioctl,
- .open = rtc_open,
- .release = rtc_release,
-};
-
-static struct miscdevice rtc_dev = { RTC_MINOR, "rtc", &rtc_fops };
-
-static int __init rtc_sun_init(void)
-{
- int error;
-
- /* It is possible we are being driven by some other RTC chip
- * and thus another RTC driver is handling things.
- */
- if (!mstk48t02_regs)
- return -ENODEV;
-
- error = misc_register(&rtc_dev);
- if (error) {
- printk(KERN_ERR "rtc: unable to get misc minor for Mostek\n");
- return error;
- }
- printk("rtc_sun_init: Registered Mostek RTC driver.\n");
-
- return 0;
-}
-
-static void __exit rtc_sun_cleanup(void)
-{
- misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_sun_init);
-module_exit(rtc_sun_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 777637594ac..27993c37775 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -1,7 +1,7 @@
-/* $Id: uctrl.c,v 1.12 2001/10/08 22:19:51 davem Exp $
- * uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
+/* uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
*
* Copyright 1999 Derrick J Brashear (shadow@dementia.org)
+ * Copyright 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
@@ -14,6 +14,8 @@
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
@@ -21,7 +23,6 @@
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/pgtable.h>
-#include <asm/sbus.h>
#define UCTRL_MINOR 174
@@ -33,26 +34,26 @@
#endif
struct uctrl_regs {
- volatile u32 uctrl_intr;
- volatile u32 uctrl_data;
- volatile u32 uctrl_stat;
- volatile u32 uctrl_xxx[5];
+ u32 uctrl_intr;
+ u32 uctrl_data;
+ u32 uctrl_stat;
+ u32 uctrl_xxx[5];
};
struct ts102_regs {
- volatile u32 card_a_intr;
- volatile u32 card_a_stat;
- volatile u32 card_a_ctrl;
- volatile u32 card_a_xxx;
- volatile u32 card_b_intr;
- volatile u32 card_b_stat;
- volatile u32 card_b_ctrl;
- volatile u32 card_b_xxx;
- volatile u32 uctrl_intr;
- volatile u32 uctrl_data;
- volatile u32 uctrl_stat;
- volatile u32 uctrl_xxx;
- volatile u32 ts102_xxx[4];
+ u32 card_a_intr;
+ u32 card_a_stat;
+ u32 card_a_ctrl;
+ u32 card_a_xxx;
+ u32 card_b_intr;
+ u32 card_b_stat;
+ u32 card_b_ctrl;
+ u32 card_b_xxx;
+ u32 uctrl_intr;
+ u32 uctrl_data;
+ u32 uctrl_stat;
+ u32 uctrl_xxx;
+ u32 ts102_xxx[4];
};
/* Bits for uctrl_intr register */
@@ -186,17 +187,15 @@ enum uctrl_opcode {
POWER_RESTART=0x83,
};
-struct uctrl_driver {
- struct uctrl_regs *regs;
+static struct uctrl_driver {
+ struct uctrl_regs __iomem *regs;
int irq;
int pending;
struct uctrl_status status;
-};
-
-static struct uctrl_driver drv;
+} *global_driver;
-static void uctrl_get_event_status(void);
-static void uctrl_get_external_status(void);
+static void uctrl_get_event_status(struct uctrl_driver *);
+static void uctrl_get_external_status(struct uctrl_driver *);
static int
uctrl_ioctl(struct inode *inode, struct file *file,
@@ -213,16 +212,14 @@ static int
uctrl_open(struct inode *inode, struct file *file)
{
lock_kernel();
- uctrl_get_event_status();
- uctrl_get_external_status();
+ uctrl_get_event_status(global_driver);
+ uctrl_get_external_status(global_driver);
unlock_kernel();
return 0;
}
static irqreturn_t uctrl_interrupt(int irq, void *dev_id)
{
- struct uctrl_driver *driver = (struct uctrl_driver *)dev_id;
- printk("in uctrl_interrupt\n");
return IRQ_HANDLED;
}
@@ -244,11 +241,11 @@ static struct miscdevice uctrl_dev = {
{ \
unsigned int i; \
for (i = 0; i < 10000; i++) { \
- if (UCTRL_STAT_TXNF_STA & driver->regs->uctrl_stat) \
+ if (UCTRL_STAT_TXNF_STA & sbus_readl(&driver->regs->uctrl_stat)) \
break; \
} \
dprintk(("write data 0x%02x\n", value)); \
- driver->regs->uctrl_data = value; \
+ sbus_writel(value, &driver->regs->uctrl_data); \
}
/* Wait for something to read, read it, then clear the bit */
@@ -257,24 +254,23 @@ static struct miscdevice uctrl_dev = {
unsigned int i; \
value = 0; \
for (i = 0; i < 10000; i++) { \
- if ((UCTRL_STAT_RXNE_STA & driver->regs->uctrl_stat) == 0) \
+ if ((UCTRL_STAT_RXNE_STA & sbus_readl(&driver->regs->uctrl_stat)) == 0) \
break; \
udelay(1); \
} \
- value = driver->regs->uctrl_data; \
+ value = sbus_readl(&driver->regs->uctrl_data); \
dprintk(("read data 0x%02x\n", value)); \
- driver->regs->uctrl_stat = UCTRL_STAT_RXNE_STA; \
+ sbus_writel(UCTRL_STAT_RXNE_STA, &driver->regs->uctrl_stat); \
}
-static void uctrl_do_txn(struct uctrl_txn *txn)
+static void uctrl_do_txn(struct uctrl_driver *driver, struct uctrl_txn *txn)
{
- struct uctrl_driver *driver = &drv;
int stat, incnt, outcnt, bytecnt, intr;
u32 byte;
- stat = driver->regs->uctrl_stat;
- intr = driver->regs->uctrl_intr;
- driver->regs->uctrl_stat = stat;
+ stat = sbus_readl(&driver->regs->uctrl_stat);
+ intr = sbus_readl(&driver->regs->uctrl_intr);
+ sbus_writel(stat, &driver->regs->uctrl_stat);
dprintk(("interrupt stat 0x%x int 0x%x\n", stat, intr));
@@ -305,9 +301,8 @@ static void uctrl_do_txn(struct uctrl_txn *txn)
}
}
-static void uctrl_get_event_status(void)
+static void uctrl_get_event_status(struct uctrl_driver *driver)
{
- struct uctrl_driver *driver = &drv;
struct uctrl_txn txn;
u8 outbits[2];
@@ -317,7 +312,7 @@ static void uctrl_get_event_status(void)
txn.inbuf = NULL;
txn.outbuf = outbits;
- uctrl_do_txn(&txn);
+ uctrl_do_txn(driver, &txn);
dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
driver->status.event_status =
@@ -325,9 +320,8 @@ static void uctrl_get_event_status(void)
dprintk(("ev is %x\n", driver->status.event_status));
}
-static void uctrl_get_external_status(void)
+static void uctrl_get_external_status(struct uctrl_driver *driver)
{
- struct uctrl_driver *driver = &drv;
struct uctrl_txn txn;
u8 outbits[2];
int i, v;
@@ -338,7 +332,7 @@ static void uctrl_get_external_status(void)
txn.inbuf = NULL;
txn.outbuf = outbits;
- uctrl_do_txn(&txn);
+ uctrl_do_txn(driver, &txn);
dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
driver->status.external_status =
@@ -354,71 +348,101 @@ static void uctrl_get_external_status(void)
}
-static int __init ts102_uctrl_init(void)
+static int __devinit uctrl_probe(struct of_device *op,
+ const struct of_device_id *match)
{
- struct uctrl_driver *driver = &drv;
- int len;
- struct linux_prom_irqs tmp_irq[2];
- unsigned int vaddr[2] = { 0, 0 };
- int tmpnode, uctrlnode = prom_getchild(prom_root_node);
- int err;
+ struct uctrl_driver *p;
+ int err = -ENOMEM;
- tmpnode = prom_searchsiblings(uctrlnode, "obio");
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ printk(KERN_ERR "uctrl: Unable to allocate device struct.\n");
+ goto out;
+ }
- if (tmpnode)
- uctrlnode = prom_getchild(tmpnode);
+ p->regs = of_ioremap(&op->resource[0], 0,
+ resource_size(&op->resource[0]),
+ "uctrl");
+ if (!p->regs) {
+ printk(KERN_ERR "uctrl: Unable to map registers.\n");
+ goto out_free;
+ }
- uctrlnode = prom_searchsiblings(uctrlnode, "uctrl");
+ p->irq = op->irqs[0];
+ err = request_irq(p->irq, uctrl_interrupt, 0, "uctrl", p);
+ if (err) {
+ printk(KERN_ERR "uctrl: Unable to register irq.\n");
+ goto out_iounmap;
+ }
- if (!uctrlnode)
- return -ENODEV;
+ err = misc_register(&uctrl_dev);
+ if (err) {
+ printk(KERN_ERR "uctrl: Unable to register misc device.\n");
+ goto out_free_irq;
+ }
- /* the prom mapped it for us */
- len = prom_getproperty(uctrlnode, "address", (void *) vaddr,
- sizeof(vaddr));
- driver->regs = (struct uctrl_regs *)vaddr[0];
+ sbus_writel(UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK, &p->regs->uctrl_intr);
+ printk(KERN_INFO "%s: uctrl regs[0x%p] (irq %d)\n",
+ op->node->full_name, p->regs, p->irq);
+ uctrl_get_event_status(p);
+ uctrl_get_external_status(p);
- len = prom_getproperty(uctrlnode, "intr", (char *) tmp_irq,
- sizeof(tmp_irq));
+ dev_set_drvdata(&op->dev, p);
+ global_driver = p;
- /* Flush device */
- READUCTLDATA(len);
+out:
+ return err;
- if(!driver->irq)
- driver->irq = tmp_irq[0].pri;
+out_free_irq:
+ free_irq(p->irq, p);
- err = request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver);
- if (err) {
- printk("%s: unable to register irq %d\n",
- __func__, driver->irq);
- return err;
- }
+out_iounmap:
+ of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
- if (misc_register(&uctrl_dev)) {
- printk("%s: unable to get misc minor %d\n",
- __func__, uctrl_dev.minor);
- free_irq(driver->irq, driver);
- return -ENODEV;
- }
+out_free:
+ kfree(p);
+ goto out;
+}
- driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
- printk("uctrl: 0x%p (irq %d)\n", driver->regs, driver->irq);
- uctrl_get_event_status();
- uctrl_get_external_status();
- return 0;
+static int __devexit uctrl_remove(struct of_device *op)
+{
+ struct uctrl_driver *p = dev_get_drvdata(&op->dev);
+
+ if (p) {
+ misc_deregister(&uctrl_dev);
+ free_irq(p->irq, p);
+ of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
+ kfree(p);
+ }
+ return 0;
}
-static void __exit ts102_uctrl_cleanup(void)
+static const struct of_device_id uctrl_match[] = {
+ {
+ .name = "uctrl",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, uctrl_match);
+
+static struct of_platform_driver uctrl_driver = {
+ .name = "uctrl",
+ .match_table = uctrl_match,
+ .probe = uctrl_probe,
+ .remove = __devexit_p(uctrl_remove),
+};
+
+
+static int __init uctrl_init(void)
{
- struct uctrl_driver *driver = &drv;
+ return of_register_driver(&uctrl_driver, &of_bus_type);
+}
- misc_deregister(&uctrl_dev);
- if (driver->irq)
- free_irq(driver->irq, driver);
- if (driver->regs)
- driver->regs = NULL;
+static void __exit uctrl_exit(void)
+{
+ of_unregister_driver(&uctrl_driver);
}
-module_init(ts102_uctrl_init);
-module_exit(ts102_uctrl_cleanup);
+module_init(uctrl_init);
+module_exit(uctrl_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h
deleted file mode 100644
index a5240c52aa0..00000000000
--- a/drivers/sbus/char/vfc.h
+++ /dev/null
@@ -1,171 +0,0 @@
-#ifndef _LINUX_VFC_H_
-#define _LINUX_VFC_H_
-
-/*
- * The control register for the vfc is at offset 0x4000
- * The first field ram bank is located at offset 0x5000
- * The second field ram bank is at offset 0x7000
- * i2c_reg address the Phillips PCF8584(see notes in vfc_i2c.c)
- * data and transmit register.
- * i2c_s1 controls register s1 of the PCF8584
- * i2c_write seems to be similar to i2c_write but I am not
- * quite sure why sun uses it
- *
- * I am also not sure whether or not you can read the fram bank as a
- * whole or whether you must read each word individually from offset
- * 0x5000 as soon as I figure it out I will update this file */
-
-struct vfc_regs {
- char pad1[0x4000];
- unsigned int control; /* Offset 0x4000 */
- char pad2[0xffb]; /* from offset 0x4004 to 0x5000 */
- unsigned int fram_bank1; /* Offset 0x5000 */
- char pad3[0xffb]; /* from offset 0x5004 to 0x6000 */
- unsigned int i2c_reg; /* Offset 0x6000 */
- unsigned int i2c_magic2; /* Offset 0x6004 */
- unsigned int i2c_s1; /* Offset 0x6008 */
- unsigned int i2c_write; /* Offset 0x600c */
- char pad4[0xff0]; /* from offset 0x6010 to 0x7000 */
- unsigned int fram_bank2; /* Offset 0x7000 */
- char pad5[0x1000];
-};
-
-#define VFC_SAA9051_NR (13)
-#define VFC_SAA9051_ADDR (0x8a)
- /* The saa9051 returns the following for its status
- * bit 0 - 0
- * bit 1 - SECAM color detected (1=found,0=not found)
- * bit 2 - COLOR detected (1=found,0=not found)
- * bit 3 - 0
- * bit 4 - Field frequency bit (1=60Hz (NTSC), 0=50Hz (PAL))
- * bit 5 - 1
- * bit 6 - horizontal frequency lock (1=transmitter found,
- * 0=no transmitter)
- * bit 7 - Power on reset bit (1=reset,0=at least one successful
- * read of the status byte)
- */
-
-#define VFC_SAA9051_PONRES (0x80)
-#define VFC_SAA9051_HLOCK (0x40)
-#define VFC_SAA9051_FD (0x10)
-#define VFC_SAA9051_CD (0x04)
-#define VFC_SAA9051_CS (0x02)
-
-
-/* The various saa9051 sub addresses */
-
-#define VFC_SAA9051_IDEL (0)
-#define VFC_SAA9051_HSY_START (1)
-#define VFC_SAA9051_HSY_STOP (2)
-#define VFC_SAA9051_HC_START (3)
-#define VFC_SAA9051_HC_STOP (4)
-#define VFC_SAA9051_HS_START (5)
-#define VFC_SAA9051_HORIZ_PEAK (6)
-#define VFC_SAA9051_HUE (7)
-#define VFC_SAA9051_C1 (8)
-#define VFC_SAA9051_C2 (9)
-#define VFC_SAA9051_C3 (0xa)
-#define VFC_SAA9051_SECAM_DELAY (0xb)
-
-
-/* Bit settings for saa9051 sub address 0x06 */
-
-#define VFC_SAA9051_AP1 (0x01)
-#define VFC_SAA9051_AP2 (0x02)
-#define VFC_SAA9051_COR1 (0x04)
-#define VFC_SAA9051_COR2 (0x08)
-#define VFC_SAA9051_BP1 (0x10)
-#define VFC_SAA9051_BP2 (0x20)
-#define VFC_SAA9051_PF (0x40)
-#define VFC_SAA9051_BY (0x80)
-
-
-/* Bit settings for saa9051 sub address 0x08 */
-
-#define VFC_SAA9051_CCFR0 (0x01)
-#define VFC_SAA9051_CCFR1 (0x02)
-#define VFC_SAA9051_YPN (0x04)
-#define VFC_SAA9051_ALT (0x08)
-#define VFC_SAA9051_CO (0x10)
-#define VFC_SAA9051_VTR (0x20)
-#define VFC_SAA9051_FS (0x40)
-#define VFC_SAA9051_HPLL (0x80)
-
-
-/* Bit settings for saa9051 sub address 9 */
-
-#define VFC_SAA9051_SS0 (0x01)
-#define VFC_SAA9051_SS1 (0x02)
-#define VFC_SAA9051_AFCC (0x04)
-#define VFC_SAA9051_CI (0x08)
-#define VFC_SAA9051_SA9D4 (0x10) /* Don't care bit */
-#define VFC_SAA9051_OEC (0x20)
-#define VFC_SAA9051_OEY (0x40)
-#define VFC_SAA9051_VNL (0x80)
-
-
-/* Bit settings for saa9051 sub address 0x0A */
-
-#define VFC_SAA9051_YDL0 (0x01)
-#define VFC_SAA9051_YDL1 (0x02)
-#define VFC_SAA9051_YDL2 (0x04)
-#define VFC_SAA9051_SS2 (0x08)
-#define VFC_SAA9051_SS3 (0x10)
-#define VFC_SAA9051_YC (0x20)
-#define VFC_SAA9051_CT (0x40)
-#define VFC_SAA9051_SYC (0x80)
-
-
-#define VFC_SAA9051_SA(a,b) ((a)->saa9051_state_array[(b)+1])
-#define vfc_update_saa9051(a) (vfc_i2c_sendbuf((a),VFC_SAA9051_ADDR,\
- (a)->saa9051_state_array,\
- VFC_SAA9051_NR))
-
-
-struct vfc_dev {
- volatile struct vfc_regs __iomem *regs;
- struct vfc_regs *phys_regs;
- unsigned int control_reg;
- struct mutex device_lock_mtx;
- int instance;
- int busy;
- unsigned long which_io;
- unsigned char saa9051_state_array[VFC_SAA9051_NR];
-};
-
-void captstat_reset(struct vfc_dev *);
-void memptr_reset(struct vfc_dev *);
-
-int vfc_pcf8584_init(struct vfc_dev *);
-void vfc_i2c_delay_no_busy(struct vfc_dev *, unsigned long);
-void vfc_i2c_delay(struct vfc_dev *);
-int vfc_i2c_sendbuf(struct vfc_dev *, unsigned char, char *, int) ;
-int vfc_i2c_recvbuf(struct vfc_dev *, unsigned char, char *, int) ;
-int vfc_i2c_reset_bus(struct vfc_dev *);
-int vfc_init_i2c_bus(struct vfc_dev *);
-
-#define VFC_CONTROL_DIAGMODE 0x10000000
-#define VFC_CONTROL_MEMPTR 0x20000000
-#define VFC_CONTROL_CAPTURE 0x02000000
-#define VFC_CONTROL_CAPTRESET 0x04000000
-
-#define VFC_STATUS_CAPTURE 0x08000000
-
-#ifdef VFC_IOCTL_DEBUG
-#define VFC_IOCTL_DEBUG_PRINTK(a) printk a
-#else
-#define VFC_IOCTL_DEBUG_PRINTK(a)
-#endif
-
-#ifdef VFC_I2C_DEBUG
-#define VFC_I2C_DEBUG_PRINTK(a) printk a
-#else
-#define VFC_I2C_DEBUG_PRINTK(a)
-#endif
-
-#endif /* _LINUX_VFC_H_ */
-
-
-
-
-
diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c
deleted file mode 100644
index 25181bb7d62..00000000000
--- a/drivers/sbus/char/vfc_dev.c
+++ /dev/null
@@ -1,736 +0,0 @@
-/*
- * drivers/sbus/char/vfc_dev.c
- *
- * Driver for the Videopix Frame Grabber.
- *
- * In order to use the VFC you need to program the video controller
- * chip. This chip is the Phillips SAA9051. You need to call their
- * documentation ordering line to get the docs.
- *
- * There is very little documentation on the VFC itself. There is
- * some useful info that can be found in the manuals that come with
- * the card. I will hopefully write some better docs at a later date.
- *
- * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu)
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/smp_lock.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/sbus.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-
-#define VFC_MAJOR (60)
-
-#if 0
-#define VFC_IOCTL_DEBUG
-#endif
-
-#include "vfc.h"
-#include <asm/vfc_ioctls.h>
-
-static const struct file_operations vfc_fops;
-static struct vfc_dev **vfc_dev_lst;
-static char vfcstr[]="vfc";
-static unsigned char saa9051_init_array[VFC_SAA9051_NR] = {
- 0x00, 0x64, 0x72, 0x52,
- 0x36, 0x18, 0xff, 0x20,
- 0xfc, 0x77, 0xe3, 0x50,
- 0x3e
-};
-
-static void vfc_lock_device(struct vfc_dev *dev)
-{
- mutex_lock(&dev->device_lock_mtx);
-}
-
-static void vfc_unlock_device(struct vfc_dev *dev)
-{
- mutex_unlock(&dev->device_lock_mtx);
-}
-
-
-static void vfc_captstat_reset(struct vfc_dev *dev)
-{
- dev->control_reg |= VFC_CONTROL_CAPTRESET;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg &= ~VFC_CONTROL_CAPTRESET;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg |= VFC_CONTROL_CAPTRESET;
- sbus_writel(dev->control_reg, &dev->regs->control);
-}
-
-static void vfc_memptr_reset(struct vfc_dev *dev)
-{
- dev->control_reg |= VFC_CONTROL_MEMPTR;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg &= ~VFC_CONTROL_MEMPTR;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg |= VFC_CONTROL_MEMPTR;
- sbus_writel(dev->control_reg, &dev->regs->control);
-}
-
-static int vfc_csr_init(struct vfc_dev *dev)
-{
- dev->control_reg = 0x80000000;
- sbus_writel(dev->control_reg, &dev->regs->control);
- udelay(200);
- dev->control_reg &= ~0x80000000;
- sbus_writel(dev->control_reg, &dev->regs->control);
- udelay(100);
- sbus_writel(0x0f000000, &dev->regs->i2c_magic2);
-
- vfc_memptr_reset(dev);
-
- dev->control_reg &= ~VFC_CONTROL_DIAGMODE;
- dev->control_reg &= ~VFC_CONTROL_CAPTURE;
- dev->control_reg |= 0x40000000;
- sbus_writel(dev->control_reg, &dev->regs->control);
-
- vfc_captstat_reset(dev);
-
- return 0;
-}
-
-static int vfc_saa9051_init(struct vfc_dev *dev)
-{
- int i;
-
- for (i = 0; i < VFC_SAA9051_NR; i++)
- dev->saa9051_state_array[i] = saa9051_init_array[i];
-
- vfc_i2c_sendbuf(dev,VFC_SAA9051_ADDR,
- dev->saa9051_state_array, VFC_SAA9051_NR);
- return 0;
-}
-
-static int init_vfc_hw(struct vfc_dev *dev)
-{
- vfc_lock_device(dev);
- vfc_csr_init(dev);
-
- vfc_pcf8584_init(dev);
- vfc_init_i2c_bus(dev); /* hopefully this doesn't undo the magic
- sun code above*/
- vfc_saa9051_init(dev);
- vfc_unlock_device(dev);
- return 0;
-}
-
-static int init_vfc_devstruct(struct vfc_dev *dev, int instance)
-{
- dev->instance=instance;
- mutex_init(&dev->device_lock_mtx);
- dev->control_reg=0;
- dev->busy=0;
- return 0;
-}
-
-static int init_vfc_device(struct sbus_dev *sdev,struct vfc_dev *dev,
- int instance)
-{
- if(dev == NULL) {
- printk(KERN_ERR "VFC: Bogus pointer passed\n");
- return -ENOMEM;
- }
- printk("Initializing vfc%d\n",instance);
- dev->regs = NULL;
- dev->regs = (volatile struct vfc_regs __iomem *)
- sbus_ioremap(&sdev->resource[0], 0,
- sizeof(struct vfc_regs), vfcstr);
- dev->which_io = sdev->reg_addrs[0].which_io;
- dev->phys_regs = (struct vfc_regs *) sdev->reg_addrs[0].phys_addr;
- if (dev->regs == NULL)
- return -EIO;
-
- printk("vfc%d: registers mapped at phys_addr: 0x%lx\n virt_addr: 0x%lx\n",
- instance,(unsigned long)sdev->reg_addrs[0].phys_addr,(unsigned long)dev->regs);
-
- if (init_vfc_devstruct(dev, instance))
- return -EINVAL;
- if (init_vfc_hw(dev))
- return -EIO;
- return 0;
-}
-
-
-static struct vfc_dev *vfc_get_dev_ptr(int instance)
-{
- return vfc_dev_lst[instance];
-}
-
-static DEFINE_SPINLOCK(vfc_dev_lock);
-
-static int vfc_open(struct inode *inode, struct file *file)
-{
- struct vfc_dev *dev;
-
- lock_kernel();
- spin_lock(&vfc_dev_lock);
- dev = vfc_get_dev_ptr(iminor(inode));
- if (dev == NULL) {
- spin_unlock(&vfc_dev_lock);
- unlock_kernel();
- return -ENODEV;
- }
- if (dev->busy) {
- spin_unlock(&vfc_dev_lock);
- unlock_kernel();
- return -EBUSY;
- }
-
- dev->busy = 1;
- spin_unlock(&vfc_dev_lock);
-
- vfc_lock_device(dev);
-
- vfc_csr_init(dev);
- vfc_pcf8584_init(dev);
- vfc_init_i2c_bus(dev);
- vfc_saa9051_init(dev);
- vfc_memptr_reset(dev);
- vfc_captstat_reset(dev);
-
- vfc_unlock_device(dev);
- unlock_kernel();
- return 0;
-}
-
-static int vfc_release(struct inode *inode,struct file *file)
-{
- struct vfc_dev *dev;
-
- spin_lock(&vfc_dev_lock);
- dev = vfc_get_dev_ptr(iminor(inode));
- if (!dev || !dev->busy) {
- spin_unlock(&vfc_dev_lock);
- return -EINVAL;
- }
- dev->busy = 0;
- spin_unlock(&vfc_dev_lock);
- return 0;
-}
-
-static int vfc_debug(struct vfc_dev *dev, int cmd, void __user *argp)
-{
- struct vfc_debug_inout inout;
- unsigned char *buffer;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- switch(cmd) {
- case VFC_I2C_SEND:
- if(copy_from_user(&inout, argp, sizeof(inout)))
- return -EFAULT;
-
- buffer = kmalloc(inout.len, GFP_KERNEL);
- if (buffer == NULL)
- return -ENOMEM;
-
- if(copy_from_user(buffer, inout.buffer, inout.len)) {
- kfree(buffer);
- return -EFAULT;
- }
-
-
- vfc_lock_device(dev);
- inout.ret=
- vfc_i2c_sendbuf(dev,inout.addr & 0xff,
- buffer,inout.len);
-
- if (copy_to_user(argp,&inout,sizeof(inout))) {
- vfc_unlock_device(dev);
- kfree(buffer);
- return -EFAULT;
- }
- vfc_unlock_device(dev);
-
- break;
- case VFC_I2C_RECV:
- if (copy_from_user(&inout, argp, sizeof(inout)))
- return -EFAULT;
-
- buffer = kzalloc(inout.len, GFP_KERNEL);
- if (buffer == NULL)
- return -ENOMEM;
-
- vfc_lock_device(dev);
- inout.ret=
- vfc_i2c_recvbuf(dev,inout.addr & 0xff
- ,buffer,inout.len);
- vfc_unlock_device(dev);
-
- if (copy_to_user(inout.buffer, buffer, inout.len)) {
- kfree(buffer);
- return -EFAULT;
- }
- if (copy_to_user(argp,&inout,sizeof(inout))) {
- kfree(buffer);
- return -EFAULT;
- }
- kfree(buffer);
- break;
- default:
- return -EINVAL;
- };
-
- return 0;
-}
-
-static int vfc_capture_start(struct vfc_dev *dev)
-{
- vfc_captstat_reset(dev);
- dev->control_reg = sbus_readl(&dev->regs->control);
- if((dev->control_reg & VFC_STATUS_CAPTURE)) {
- printk(KERN_ERR "vfc%d: vfc capture status not reset\n",
- dev->instance);
- return -EIO;
- }
-
- vfc_lock_device(dev);
- dev->control_reg &= ~VFC_CONTROL_CAPTURE;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg |= VFC_CONTROL_CAPTURE;
- sbus_writel(dev->control_reg, &dev->regs->control);
- dev->control_reg &= ~VFC_CONTROL_CAPTURE;
- sbus_writel(dev->control_reg, &dev->regs->control);
- vfc_unlock_device(dev);
-
- return 0;
-}
-
-static int vfc_capture_poll(struct vfc_dev *dev)
-{
- int timeout = 1000;
-
- while (!timeout--) {
- if (sbus_readl(&dev->regs->control) & VFC_STATUS_CAPTURE)
- break;
- vfc_i2c_delay_no_busy(dev, 100);
- }
- if(!timeout) {
- printk(KERN_WARNING "vfc%d: capture timed out\n",
- dev->instance);
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-
-
-static int vfc_set_control_ioctl(struct inode *inode, struct file *file,
- struct vfc_dev *dev, unsigned long arg)
-{
- int setcmd, ret = 0;
-
- if (copy_from_user(&setcmd,(void __user *)arg,sizeof(unsigned int)))
- return -EFAULT;
-
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSCTRL) arg=0x%x\n",
- dev->instance,setcmd));
-
- switch(setcmd) {
- case MEMPRST:
- vfc_lock_device(dev);
- vfc_memptr_reset(dev);
- vfc_unlock_device(dev);
- ret=0;
- break;
- case CAPTRCMD:
- vfc_capture_start(dev);
- vfc_capture_poll(dev);
- break;
- case DIAGMODE:
- if(capable(CAP_SYS_ADMIN)) {
- vfc_lock_device(dev);
- dev->control_reg |= VFC_CONTROL_DIAGMODE;
- sbus_writel(dev->control_reg, &dev->regs->control);
- vfc_unlock_device(dev);
- ret = 0;
- } else {
- ret = -EPERM;
- }
- break;
- case NORMMODE:
- vfc_lock_device(dev);
- dev->control_reg &= ~VFC_CONTROL_DIAGMODE;
- sbus_writel(dev->control_reg, &dev->regs->control);
- vfc_unlock_device(dev);
- ret = 0;
- break;
- case CAPTRSTR:
- vfc_capture_start(dev);
- ret = 0;
- break;
- case CAPTRWAIT:
- vfc_capture_poll(dev);
- ret = 0;
- break;
- default:
- ret = -EINVAL;
- break;
- };
-
- return ret;
-}
-
-
-static int vfc_port_change_ioctl(struct inode *inode, struct file *file,
- struct vfc_dev *dev, unsigned long arg)
-{
- int ret = 0;
- int cmd;
-
- if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) {
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
- "vfc_port_change_ioctl\n",
- dev->instance));
- return -EFAULT;
- }
-
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCPORTCHG) arg=0x%x\n",
- dev->instance, cmd));
-
- switch(cmd) {
- case 1:
- case 2:
- VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x72;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x52;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0x36;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0x18;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) = VFC_SAA9051_BP2;
- VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_CT | VFC_SAA9051_SS3;
- VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0x3e;
- break;
- case 3:
- VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x3a;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x17;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0xfa;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0xde;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) =
- VFC_SAA9051_BY | VFC_SAA9051_PF | VFC_SAA9051_BP2;
- VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_YC;
- VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0;
- VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &=
- ~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
- break;
- default:
- ret = -EINVAL;
- return ret;
- break;
- }
-
- switch(cmd) {
- case 1:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |=
- (VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
- break;
- case 2:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &=
- ~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
- VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |= VFC_SAA9051_SS0;
- break;
- case 3:
- break;
- default:
- ret = -EINVAL;
- return ret;
- break;
- }
- VFC_SAA9051_SA(dev,VFC_SAA9051_C3) &= ~(VFC_SAA9051_SS2);
- ret=vfc_update_saa9051(dev);
- udelay(500);
- VFC_SAA9051_SA(dev,VFC_SAA9051_C3) |= (VFC_SAA9051_SS2);
- ret=vfc_update_saa9051(dev);
- return ret;
-}
-
-static int vfc_set_video_ioctl(struct inode *inode, struct file *file,
- struct vfc_dev *dev, unsigned long arg)
-{
- int ret = 0;
- int cmd;
-
- if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) {
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
- "vfc_set_video_ioctl\n",
- dev->instance));
- return ret;
- }
-
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSVID) arg=0x%x\n",
- dev->instance, cmd));
- switch(cmd) {
- case STD_NTSC:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~VFC_SAA9051_ALT;
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_YPN |
- VFC_SAA9051_CCFR0 | VFC_SAA9051_CCFR1 | VFC_SAA9051_FS;
- ret = vfc_update_saa9051(dev);
- break;
- case STD_PAL:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_YPN |
- VFC_SAA9051_CCFR1 |
- VFC_SAA9051_CCFR0 |
- VFC_SAA9051_FS);
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_ALT;
- ret = vfc_update_saa9051(dev);
- break;
-
- case COLOR_ON:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_CO;
- VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) &=
- ~(VFC_SAA9051_BY | VFC_SAA9051_PF);
- ret = vfc_update_saa9051(dev);
- break;
- case MONO:
- VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_CO);
- VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) |=
- (VFC_SAA9051_BY | VFC_SAA9051_PF);
- ret = vfc_update_saa9051(dev);
- break;
- default:
- ret = -EINVAL;
- break;
- };
-
- return ret;
-}
-
-static int vfc_get_video_ioctl(struct inode *inode, struct file *file,
- struct vfc_dev *dev, unsigned long arg)
-{
- int ret = 0;
- unsigned int status = NO_LOCK;
- unsigned char buf[1];
-
- if(vfc_i2c_recvbuf(dev, VFC_SAA9051_ADDR, buf, 1)) {
- printk(KERN_ERR "vfc%d: Unable to get status\n",
- dev->instance);
- return -EIO;
- }
-
- if(buf[0] & VFC_SAA9051_HLOCK) {
- status = NO_LOCK;
- } else if(buf[0] & VFC_SAA9051_FD) {
- if(buf[0] & VFC_SAA9051_CD)
- status = NTSC_COLOR;
- else
- status = NTSC_NOCOLOR;
- } else {
- if(buf[0] & VFC_SAA9051_CD)
- status = PAL_COLOR;
- else
- status = PAL_NOCOLOR;
- }
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGVID) returning status 0x%x; "
- "buf[0]=%x\n", dev->instance, status, buf[0]));
-
- if (copy_to_user((void __user *)arg,&status,sizeof(unsigned int))) {
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
- "vfc_get_video_ioctl\n",
- dev->instance));
- return ret;
- }
- return ret;
-}
-
-static int vfc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret = 0;
- unsigned int tmp;
- struct vfc_dev *dev;
- void __user *argp = (void __user *)arg;
-
- dev = vfc_get_dev_ptr(iminor(inode));
- if(dev == NULL)
- return -ENODEV;
-
- switch(cmd & 0x0000ffff) {
- case VFCGCTRL:
-#if 0
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGCTRL)\n", dev->instance));
-#endif
- tmp = sbus_readl(&dev->regs->control);
- if(copy_to_user(argp, &tmp, sizeof(unsigned int))) {
- ret = -EFAULT;
- break;
- }
- ret = 0;
- break;
- case VFCSCTRL:
- ret = vfc_set_control_ioctl(inode, file, dev, arg);
- break;
- case VFCGVID:
- ret = vfc_get_video_ioctl(inode, file, dev, arg);
- break;
- case VFCSVID:
- ret = vfc_set_video_ioctl(inode, file, dev, arg);
- break;
- case VFCHUE:
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCHUE)\n", dev->instance));
- if(copy_from_user(&tmp,argp,sizeof(unsigned int))) {
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer "
- "to IOCTL(VFCHUE)", dev->instance));
- ret = -EFAULT;
- } else {
- VFC_SAA9051_SA(dev,VFC_SAA9051_HUE) = tmp;
- vfc_update_saa9051(dev);
- ret = 0;
- }
- break;
- case VFCPORTCHG:
- ret = vfc_port_change_ioctl(inode, file, dev, arg);
- break;
- case VFCRDINFO:
- ret = -EINVAL;
- VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCRDINFO)\n", dev->instance));
- break;
- default:
- ret = vfc_debug(vfc_get_dev_ptr(iminor(inode)), cmd, argp);
- break;
- };
-
- return ret;
-}
-
-static int vfc_mmap(struct file *file, struct vm_area_struct *vma)
-{
- unsigned int map_size, ret, map_offset;
- struct vfc_dev *dev;
-
- dev = vfc_get_dev_ptr(iminor(file->f_path.dentry->d_inode));
- if(dev == NULL)
- return -ENODEV;
-
- map_size = vma->vm_end - vma->vm_start;
- if(map_size > sizeof(struct vfc_regs))
- map_size = sizeof(struct vfc_regs);
-
- vma->vm_flags |=
- (VM_MAYREAD | VM_MAYWRITE | VM_MAYSHARE);
- map_offset = (unsigned int) (long)dev->phys_regs;
- ret = io_remap_pfn_range(vma, vma->vm_start,
- MK_IOSPACE_PFN(dev->which_io,
- map_offset >> PAGE_SHIFT),
- map_size, vma->vm_page_prot);
-
- if(ret)
- return -EAGAIN;
-
- return 0;
-}
-
-
-static const struct file_operations vfc_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .ioctl = vfc_ioctl,
- .mmap = vfc_mmap,
- .open = vfc_open,
- .release = vfc_release,
-};
-
-static int vfc_probe(void)
-{
- struct sbus_bus *sbus;
- struct sbus_dev *sdev = NULL;
- int ret;
- int instance = 0, cards = 0;
-
- for_all_sbusdev(sdev, sbus) {
- if (strcmp(sdev->prom_name, "vfc") == 0) {
- cards++;
- continue;
- }
- }
-
- if (!cards)
- return -ENODEV;
-
- vfc_dev_lst = kcalloc(cards + 1, sizeof(struct vfc_dev*), GFP_KERNEL);
- if (vfc_dev_lst == NULL)
- return -ENOMEM;
- vfc_dev_lst[cards] = NULL;
-
- ret = register_chrdev(VFC_MAJOR, vfcstr, &vfc_fops);
- if(ret) {
- printk(KERN_ERR "Unable to get major number %d\n", VFC_MAJOR);
- kfree(vfc_dev_lst);
- return -EIO;
- }
- instance = 0;
- for_all_sbusdev(sdev, sbus) {
- if (strcmp(sdev->prom_name, "vfc") == 0) {
- vfc_dev_lst[instance]=(struct vfc_dev *)
- kmalloc(sizeof(struct vfc_dev), GFP_KERNEL);
- if (vfc_dev_lst[instance] == NULL)
- return -ENOMEM;
- ret = init_vfc_device(sdev,
- vfc_dev_lst[instance],
- instance);
- if(ret) {
- printk(KERN_ERR "Unable to initialize"
- " vfc%d device\n",
- instance);
- } else {
- }
-
- instance++;
- continue;
- }
- }
-
- return 0;
-}
-
-#ifdef MODULE
-int init_module(void)
-#else
-int vfc_init(void)
-#endif
-{
- return vfc_probe();
-}
-
-#ifdef MODULE
-static void deinit_vfc_device(struct vfc_dev *dev)
-{
- if(dev == NULL)
- return;
- sbus_iounmap(dev->regs, sizeof(struct vfc_regs));
- kfree(dev);
-}
-
-void cleanup_module(void)
-{
- struct vfc_dev **devp;
-
- unregister_chrdev(VFC_MAJOR,vfcstr);
-
- for (devp = vfc_dev_lst; *devp; devp++)
- deinit_vfc_device(*devp);
-
- kfree(vfc_dev_lst);
- return;
-}
-#endif
-
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c
deleted file mode 100644
index 32b986e0ed7..00000000000
--- a/drivers/sbus/char/vfc_i2c.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * drivers/sbus/char/vfc_i2c.c
- *
- * Driver for the Videopix Frame Grabber.
- *
- * Functions that support the Phillips i2c(I squared C) bus on the vfc
- * Documentation for the Phillips I2C bus can be found on the
- * phillips home page
- *
- * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu)
- *
- */
-
-/* NOTE: It seems to me that the documentation regarding the
-pcd8584t/pcf8584 does not show the correct way to address the i2c bus.
-Based on the information on the I2C bus itself and the remainder of
-the Phillips docs the following algorithms appear to be correct. I am
-fairly certain that the flowcharts in the phillips docs are wrong. */
-
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/sbus.h>
-
-#if 0
-#define VFC_I2C_DEBUG
-#endif
-
-#include "vfc.h"
-#include "vfc_i2c.h"
-
-#define WRITE_S1(__val) \
- sbus_writel(__val, &dev->regs->i2c_s1)
-#define WRITE_REG(__val) \
- sbus_writel(__val, &dev->regs->i2c_reg)
-
-#define VFC_I2C_READ (0x1)
-#define VFC_I2C_WRITE (0x0)
-
-/******
- The i2c bus controller chip on the VFC is a pcd8584t, but
- phillips claims it doesn't exist. As far as I can tell it is
- identical to the PCF8584 so I treat it like it is the pcf8584.
-
- NOTE: The pcf8584 only cares
- about the msb of the word you feed it
-*****/
-
-int vfc_pcf8584_init(struct vfc_dev *dev)
-{
- /* This will also choose register S0_OWN so we can set it. */
- WRITE_S1(RESET);
-
- /* The pcf8584 shifts this value left one bit and uses
- * it as its i2c bus address.
- */
- WRITE_REG(0x55000000);
-
- /* This will set the i2c bus at the same speed sun uses,
- * and set another magic bit.
- */
- WRITE_S1(SELECT(S2));
- WRITE_REG(0x14000000);
-
- /* Enable the serial port, idle the i2c bus and set
- * the data reg to s0.
- */
- WRITE_S1(CLEAR_I2C_BUS);
- udelay(100);
- return 0;
-}
-
-void vfc_i2c_delay_no_busy(struct vfc_dev *dev, unsigned long usecs)
-{
- schedule_timeout_uninterruptible(usecs_to_jiffies(usecs));
-}
-
-void inline vfc_i2c_delay(struct vfc_dev *dev)
-{
- vfc_i2c_delay_no_busy(dev, 100);
-}
-
-int vfc_init_i2c_bus(struct vfc_dev *dev)
-{
- WRITE_S1(ENABLE_SERIAL | SELECT(S0) | ACK);
- vfc_i2c_reset_bus(dev);
- return 0;
-}
-
-int vfc_i2c_reset_bus(struct vfc_dev *dev)
-{
- VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: Resetting the i2c bus\n",
- dev->instance));
- if(dev == NULL)
- return -EINVAL;
- if(dev->regs == NULL)
- return -EINVAL;
- WRITE_S1(SEND_I2C_STOP);
- WRITE_S1(SEND_I2C_STOP | ACK);
- vfc_i2c_delay(dev);
- WRITE_S1(CLEAR_I2C_BUS);
- VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: I2C status %x\n",
- dev->instance,
- sbus_readl(&dev->regs->i2c_s1)));
- return 0;
-}
-
-static int vfc_i2c_wait_for_bus(struct vfc_dev *dev)
-{
- int timeout = 1000;
-
- while(!(sbus_readl(&dev->regs->i2c_s1) & BB)) {
- if(!(timeout--))
- return -ETIMEDOUT;
- vfc_i2c_delay(dev);
- }
- return 0;
-}
-
-static int vfc_i2c_wait_for_pin(struct vfc_dev *dev, int ack)
-{
- int timeout = 1000;
- int s1;
-
- while ((s1 = sbus_readl(&dev->regs->i2c_s1)) & PIN) {
- if (!(timeout--))
- return -ETIMEDOUT;
- vfc_i2c_delay(dev);
- }
- if (ack == VFC_I2C_ACK_CHECK) {
- if(s1 & LRB)
- return -EIO;
- }
- return 0;
-}
-
-#define SHIFT(a) ((a) << 24)
-static int vfc_i2c_xmit_addr(struct vfc_dev *dev, unsigned char addr,
- char mode)
-{
- int ret, raddr;
-#if 1
- WRITE_S1(SEND_I2C_STOP | ACK);
- WRITE_S1(SELECT(S0) | ENABLE_SERIAL);
- vfc_i2c_delay(dev);
-#endif
-
- switch(mode) {
- case VFC_I2C_READ:
- raddr = SHIFT(((unsigned int)addr | 0x1));
- WRITE_REG(raddr);
- VFC_I2C_DEBUG_PRINTK(("vfc%d: receiving from i2c addr 0x%x\n",
- dev->instance, addr | 0x1));
- break;
- case VFC_I2C_WRITE:
- raddr = SHIFT((unsigned int)addr & ~0x1);
- WRITE_REG(raddr);
- VFC_I2C_DEBUG_PRINTK(("vfc%d: sending to i2c addr 0x%x\n",
- dev->instance, addr & ~0x1));
- break;
- default:
- return -EINVAL;
- };
-
- WRITE_S1(SEND_I2C_START);
- vfc_i2c_delay(dev);
- ret = vfc_i2c_wait_for_pin(dev,VFC_I2C_ACK_CHECK); /* We wait
- for the
- i2c send
- to finish
- here but
- Sun
- doesn't,
- hmm */
- if (ret) {
- printk(KERN_ERR "vfc%d: VFC xmit addr timed out or no ack\n",
- dev->instance);
- return ret;
- } else if (mode == VFC_I2C_READ) {
- if ((ret = sbus_readl(&dev->regs->i2c_reg) & 0xff000000) != raddr) {
- printk(KERN_WARNING
- "vfc%d: returned slave address "
- "mismatch(%x,%x)\n",
- dev->instance, raddr, ret);
- }
- }
- return 0;
-}
-
-static int vfc_i2c_xmit_byte(struct vfc_dev *dev,unsigned char *byte)
-{
- int ret;
- u32 val = SHIFT((unsigned int)*byte);
-
- WRITE_REG(val);
-
- ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_ACK_CHECK);
- switch(ret) {
- case -ETIMEDOUT:
- printk(KERN_ERR "vfc%d: VFC xmit byte timed out or no ack\n",
- dev->instance);
- break;
- case -EIO:
- ret = XMIT_LAST_BYTE;
- break;
- default:
- break;
- };
-
- return ret;
-}
-
-static int vfc_i2c_recv_byte(struct vfc_dev *dev, unsigned char *byte,
- int last)
-{
- int ret;
-
- if (last) {
- WRITE_REG(NEGATIVE_ACK);
- VFC_I2C_DEBUG_PRINTK(("vfc%d: sending negative ack\n",
- dev->instance));
- } else {
- WRITE_S1(ACK);
- }
-
- ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_NO_ACK_CHECK);
- if(ret) {
- printk(KERN_ERR "vfc%d: "
- "VFC recv byte timed out\n",
- dev->instance);
- }
- *byte = (sbus_readl(&dev->regs->i2c_reg)) >> 24;
- return ret;
-}
-
-int vfc_i2c_recvbuf(struct vfc_dev *dev, unsigned char addr,
- char *buf, int count)
-{
- int ret, last;
-
- if(!(count && buf && dev && dev->regs) )
- return -EINVAL;
-
- if ((ret = vfc_i2c_wait_for_bus(dev))) {
- printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance);
- return ret;
- }
-
- if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_READ))) {
- WRITE_S1(SEND_I2C_STOP);
- vfc_i2c_delay(dev);
- return ret;
- }
-
- last = 0;
- while (count--) {
- if (!count)
- last = 1;
- if ((ret = vfc_i2c_recv_byte(dev, buf, last))) {
- printk(KERN_ERR "vfc%d: "
- "VFC error while receiving byte\n",
- dev->instance);
- WRITE_S1(SEND_I2C_STOP);
- ret = -EINVAL;
- }
- buf++;
- }
- WRITE_S1(SEND_I2C_STOP | ACK);
- vfc_i2c_delay(dev);
- return ret;
-}
-
-int vfc_i2c_sendbuf(struct vfc_dev *dev, unsigned char addr,
- char *buf, int count)
-{
- int ret;
-
- if (!(buf && dev && dev->regs))
- return -EINVAL;
-
- if ((ret = vfc_i2c_wait_for_bus(dev))) {
- printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance);
- return ret;
- }
-
- if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_WRITE))) {
- WRITE_S1(SEND_I2C_STOP);
- vfc_i2c_delay(dev);
- return ret;
- }
-
- while(count--) {
- ret = vfc_i2c_xmit_byte(dev, buf);
- switch(ret) {
- case XMIT_LAST_BYTE:
- VFC_I2C_DEBUG_PRINTK(("vfc%d: "
- "Receiver ended transmission with "
- " %d bytes remaining\n",
- dev->instance, count));
- ret = 0;
- goto done;
- break;
- case 0:
- break;
- default:
- printk(KERN_ERR "vfc%d: "
- "VFC error while sending byte\n", dev->instance);
- break;
- };
-
- buf++;
- }
-done:
- WRITE_S1(SEND_I2C_STOP | ACK);
- vfc_i2c_delay(dev);
- return ret;
-}
-
-
-
-
-
-
-
-
-
diff --git a/drivers/sbus/char/vfc_i2c.h b/drivers/sbus/char/vfc_i2c.h
deleted file mode 100644
index a2e6973209d..00000000000
--- a/drivers/sbus/char/vfc_i2c.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_VFC_I2C_H_
-#define _LINUX_VFC_I2C_H_
-
-/* control bits */
-#define PIN (0x80000000)
-#define ESO (0x40000000)
-#define ES1 (0x20000000)
-#define ES2 (0x10000000)
-#define ENI (0x08000000)
-#define STA (0x04000000)
-#define STO (0x02000000)
-#define ACK (0x01000000)
-
-/* status bits */
-#define STS (0x20000000)
-#define BER (0x10000000)
-#define LRB (0x08000000)
-#define AAS (0x04000000)
-#define LAB (0x02000000)
-#define BB (0x01000000)
-
-#define SEND_I2C_START (PIN | ESO | STA)
-#define SEND_I2C_STOP (PIN | ESO | STO)
-#define CLEAR_I2C_BUS (PIN | ESO | ACK)
-#define NEGATIVE_ACK ((ESO) & ~ACK)
-
-#define SELECT(a) (a)
-#define S0 (PIN | ESO | ES1)
-#define S0_OWN (PIN)
-#define S2 (PIN | ES1)
-#define S3 (PIN | ES2)
-
-#define ENABLE_SERIAL (PIN | ESO)
-#define DISABLE_SERIAL (PIN)
-#define RESET (PIN)
-
-#define XMIT_LAST_BYTE (1)
-#define VFC_I2C_ACK_CHECK (1)
-#define VFC_I2C_NO_ACK_CHECK (0)
-
-#endif /* _LINUX_VFC_I2C_H_ */
-
-
-
diff --git a/drivers/sbus/dvma.c b/drivers/sbus/dvma.c
deleted file mode 100644
index ab0d2de3324..00000000000
--- a/drivers/sbus/dvma.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* dvma.c: Routines that are used to access DMA on the Sparc SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/sbus.h>
-
-struct sbus_dma *dma_chain;
-
-static void __init init_one_dvma(struct sbus_dma *dma, int num_dma)
-{
- printk("dma%d: ", num_dma);
-
- dma->next = NULL;
- dma->running = 0; /* No transfers going on as of yet */
- dma->allocated = 0; /* No one has allocated us yet */
- switch(sbus_readl(dma->regs + DMA_CSR)&DMA_DEVICE_ID) {
- case DMA_VERS0:
- dma->revision = dvmarev0;
- printk("Revision 0 ");
- break;
- case DMA_ESCV1:
- dma->revision = dvmaesc1;
- printk("ESC Revision 1 ");
- break;
- case DMA_VERS1:
- dma->revision = dvmarev1;
- printk("Revision 1 ");
- break;
- case DMA_VERS2:
- dma->revision = dvmarev2;
- printk("Revision 2 ");
- break;
- case DMA_VERHME:
- dma->revision = dvmahme;
- printk("HME DVMA gate array ");
- break;
- case DMA_VERSPLUS:
- dma->revision = dvmarevplus;
- printk("Revision 1 PLUS ");
- break;
- default:
- printk("unknown dma version %08x",
- sbus_readl(dma->regs + DMA_CSR) & DMA_DEVICE_ID);
- dma->allocated = 1;
- break;
- }
- printk("\n");
-}
-
-/* Probe this SBus DMA module(s) */
-void __init dvma_init(struct sbus_bus *sbus)
-{
- struct sbus_dev *this_dev;
- struct sbus_dma *dma;
- struct sbus_dma *dchain;
- static int num_dma = 0;
-
- for_each_sbusdev(this_dev, sbus) {
- char *name = this_dev->prom_name;
- int hme = 0;
-
- if(!strcmp(name, "SUNW,fas"))
- hme = 1;
- else if(strcmp(name, "dma") &&
- strcmp(name, "ledma") &&
- strcmp(name, "espdma"))
- continue;
-
- /* Found one... */
- dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
- dma->sdev = this_dev;
-
- /* Put at end of dma chain */
- dchain = dma_chain;
- if(dchain) {
- while(dchain->next)
- dchain = dchain->next;
- dchain->next = dma;
- } else {
- /* We're the first in line */
- dma_chain = dma;
- }
-
- dma->regs = sbus_ioremap(&dma->sdev->resource[0], 0,
- dma->sdev->resource[0].end - dma->sdev->resource[0].start + 1,
- "dma");
-
- dma->node = dma->sdev->prom_node;
-
- init_one_dvma(dma, num_dma++);
- }
-}
-
-#ifdef CONFIG_SUN4
-
-#include <asm/sun4paddr.h>
-
-void __init sun4_dvma_init(void)
-{
- struct sbus_dma *dma;
- struct resource r;
-
- if(sun4_dma_physaddr) {
- dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
- /* No SBUS */
- dma->sdev = NULL;
-
- /* Only one DMA device */
- dma_chain = dma;
-
- memset(&r, 0, sizeof(r));
- r.start = sun4_dma_physaddr;
- dma->regs = sbus_ioremap(&r, 0, PAGE_SIZE, "dma");
-
- /* No prom node */
- dma->node = 0x0;
-
- init_one_dvma(dma, 0);
- } else {
- dma_chain = NULL;
- }
-}
-
-#endif
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
deleted file mode 100644
index 9c129248466..00000000000
--- a/drivers/sbus/sbus.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/* sbus.c: SBus support routines.
- *
- * Copyright (C) 1995, 2006 David S. Miller (davem@davemloft.net)
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <asm/sbus.h>
-#include <asm/dma.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-#include <asm/irq.h>
-
-static ssize_t
-show_sbusobppath_attr(struct device * dev, struct device_attribute * attr, char * buf)
-{
- struct sbus_dev *sbus;
-
- sbus = to_sbus_device(dev);
-
- return snprintf (buf, PAGE_SIZE, "%s\n", sbus->ofdev.node->full_name);
-}
-
-static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_sbusobppath_attr, NULL);
-
-struct sbus_bus *sbus_root;
-
-static void __init fill_sbus_device(struct device_node *dp, struct sbus_dev *sdev)
-{
- struct dev_archdata *sd;
- unsigned long base;
- const void *pval;
- int len, err;
-
- sdev->prom_node = dp->node;
- strcpy(sdev->prom_name, dp->name);
-
- pval = of_get_property(dp, "reg", &len);
- sdev->num_registers = 0;
- if (pval) {
- memcpy(sdev->reg_addrs, pval, len);
-
- sdev->num_registers =
- len / sizeof(struct linux_prom_registers);
-
- base = (unsigned long) sdev->reg_addrs[0].phys_addr;
-
- /* Compute the slot number. */
- if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m)
- sdev->slot = sbus_dev_slot(base);
- else
- sdev->slot = sdev->reg_addrs[0].which_io;
- }
-
- pval = of_get_property(dp, "ranges", &len);
- sdev->num_device_ranges = 0;
- if (pval) {
- memcpy(sdev->device_ranges, pval, len);
- sdev->num_device_ranges =
- len / sizeof(struct linux_prom_ranges);
- }
-
- sbus_fill_device_irq(sdev);
-
- sd = &sdev->ofdev.dev.archdata;
- sd->prom_node = dp;
- sd->op = &sdev->ofdev;
-
- sdev->ofdev.node = dp;
- if (sdev->parent)
- sdev->ofdev.dev.parent = &sdev->parent->ofdev.dev;
- else
- sdev->ofdev.dev.parent = &sdev->bus->ofdev.dev;
- sdev->ofdev.dev.bus = &sbus_bus_type;
- dev_set_name(&sdev->ofdev.dev, "sbus[%08x]", dp->node);
-
- if (of_device_register(&sdev->ofdev) != 0)
- printk(KERN_DEBUG "sbus: device registration error for %s!\n",
- dp->path_component_name);
-
- /* WE HAVE BEEN INVADED BY ALIENS! */
- err = sysfs_create_file(&sdev->ofdev.dev.kobj, &dev_attr_obppath.attr);
-}
-
-static void __init sbus_bus_ranges_init(struct device_node *dp, struct sbus_bus *sbus)
-{
- const void *pval;
- int len;
-
- pval = of_get_property(dp, "ranges", &len);
- sbus->num_sbus_ranges = 0;
- if (pval) {
- memcpy(sbus->sbus_ranges, pval, len);
- sbus->num_sbus_ranges =
- len / sizeof(struct linux_prom_ranges);
-
- sbus_arch_bus_ranges_init(dp->parent, sbus);
- }
-}
-
-static void __init __apply_ranges_to_regs(struct linux_prom_ranges *ranges,
- int num_ranges,
- struct linux_prom_registers *regs,
- int num_regs)
-{
- if (num_ranges) {
- int regnum;
-
- for (regnum = 0; regnum < num_regs; regnum++) {
- int rngnum;
-
- for (rngnum = 0; rngnum < num_ranges; rngnum++) {
- if (regs[regnum].which_io == ranges[rngnum].ot_child_space)
- break;
- }
- if (rngnum == num_ranges) {
- /* We used to flag this as an error. Actually
- * some devices do not report the regs as we expect.
- * For example, see SUNW,pln device. In that case
- * the reg property is in a format internal to that
- * node, ie. it is not in the SBUS register space
- * per se. -DaveM
- */
- return;
- }
- regs[regnum].which_io = ranges[rngnum].ot_parent_space;
- regs[regnum].phys_addr -= ranges[rngnum].ot_child_base;
- regs[regnum].phys_addr += ranges[rngnum].ot_parent_base;
- }
- }
-}
-
-static void __init __fixup_regs_sdev(struct sbus_dev *sdev)
-{
- if (sdev->num_registers != 0) {
- struct sbus_dev *parent = sdev->parent;
- int i;
-
- while (parent != NULL) {
- __apply_ranges_to_regs(parent->device_ranges,
- parent->num_device_ranges,
- sdev->reg_addrs,
- sdev->num_registers);
-
- parent = parent->parent;
- }
-
- __apply_ranges_to_regs(sdev->bus->sbus_ranges,
- sdev->bus->num_sbus_ranges,
- sdev->reg_addrs,
- sdev->num_registers);
-
- for (i = 0; i < sdev->num_registers; i++) {
- struct resource *res = &sdev->resource[i];
-
- res->start = sdev->reg_addrs[i].phys_addr;
- res->end = (res->start +
- (unsigned long)sdev->reg_addrs[i].reg_size - 1UL);
- res->flags = IORESOURCE_IO |
- (sdev->reg_addrs[i].which_io & 0xff);
- }
- }
-}
-
-static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
-{
- struct sbus_dev *sdev;
-
- for (sdev = first_sdev; sdev; sdev = sdev->next) {
- if (sdev->child)
- sbus_fixup_all_regs(sdev->child);
- __fixup_regs_sdev(sdev);
- }
-}
-
-/* We preserve the "probe order" of these bus and device lists to give
- * the same ordering as the old code.
- */
-static void __init sbus_insert(struct sbus_bus *sbus, struct sbus_bus **root)
-{
- while (*root)
- root = &(*root)->next;
- *root = sbus;
- sbus->next = NULL;
-}
-
-static void __init sdev_insert(struct sbus_dev *sdev, struct sbus_dev **root)
-{
- while (*root)
- root = &(*root)->next;
- *root = sdev;
- sdev->next = NULL;
-}
-
-static void __init walk_children(struct device_node *dp, struct sbus_dev *parent, struct sbus_bus *sbus)
-{
- dp = dp->child;
- while (dp) {
- struct sbus_dev *sdev;
-
- sdev = kzalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
- if (sdev) {
- sdev_insert(sdev, &parent->child);
-
- sdev->bus = sbus;
- sdev->parent = parent;
- sdev->ofdev.dev.archdata.iommu =
- sbus->ofdev.dev.archdata.iommu;
- sdev->ofdev.dev.archdata.stc =
- sbus->ofdev.dev.archdata.stc;
-
- fill_sbus_device(dp, sdev);
-
- walk_children(dp, sdev, sbus);
- }
- dp = dp->sibling;
- }
-}
-
-static void __init build_one_sbus(struct device_node *dp, int num_sbus)
-{
- struct sbus_bus *sbus;
- unsigned int sbus_clock;
- struct device_node *dev_dp;
-
- sbus = kzalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
- if (!sbus)
- return;
-
- sbus_insert(sbus, &sbus_root);
- sbus->prom_node = dp->node;
-
- sbus_setup_iommu(sbus, dp);
-
- printk("sbus%d: ", num_sbus);
-
- sbus_clock = of_getintprop_default(dp, "clock-frequency",
- (25*1000*1000));
- sbus->clock_freq = sbus_clock;
-
- printk("Clock %d.%d MHz\n", (int) ((sbus_clock/1000)/1000),
- (int) (((sbus_clock/1000)%1000 != 0) ?
- (((sbus_clock/1000)%1000) + 1000) : 0));
-
- strcpy(sbus->prom_name, dp->name);
-
- sbus_setup_arch_props(sbus, dp);
-
- sbus_bus_ranges_init(dp, sbus);
-
- sbus->ofdev.node = dp;
- sbus->ofdev.dev.parent = NULL;
- sbus->ofdev.dev.bus = &sbus_bus_type;
- dev_set_name(&sbus->ofdev.dev, "sbus%d", num_sbus);
-
- if (of_device_register(&sbus->ofdev) != 0)
- printk(KERN_DEBUG "sbus: device registration error for %s!\n",
- dev_name(&sbus->ofdev.dev));
-
- dev_dp = dp->child;
- while (dev_dp) {
- struct sbus_dev *sdev;
-
- sdev = kzalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
- if (sdev) {
- sdev_insert(sdev, &sbus->devices);
-
- sdev->bus = sbus;
- sdev->parent = NULL;
- sdev->ofdev.dev.archdata.iommu =
- sbus->ofdev.dev.archdata.iommu;
- sdev->ofdev.dev.archdata.stc =
- sbus->ofdev.dev.archdata.stc;
-
- fill_sbus_device(dev_dp, sdev);
-
- walk_children(dev_dp, sdev, sbus);
- }
- dev_dp = dev_dp->sibling;
- }
-
- sbus_fixup_all_regs(sbus->devices);
-
- dvma_init(sbus);
-}
-
-static int __init sbus_init(void)
-{
- struct device_node *dp;
- const char *sbus_name = "sbus";
- int num_sbus = 0;
-
- if (sbus_arch_preinit())
- return 0;
-
- if (sparc_cpu_model == sun4d)
- sbus_name = "sbi";
-
- for_each_node_by_name(dp, sbus_name) {
- build_one_sbus(dp, num_sbus);
- num_sbus++;
-
- }
-
- sbus_arch_postinit();
-
- return 0;
-}
-
-subsys_initcall(sbus_init);