diff options
Diffstat (limited to 'drivers/scsi/aacraid/rx.c')
| -rw-r--r-- | drivers/scsi/aacraid/rx.c | 157 |
1 files changed, 95 insertions, 62 deletions
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index a8459faf87c..da99046e539 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -49,40 +49,57 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs) { struct aac_dev *dev = dev_id; - unsigned long bellbits; - u8 intstat, mask; - intstat = rx_readb(dev, MUnit.OISR); - /* - * Read mask and invert because drawbridge is reversed. - * This allows us to only service interrupts that have - * been enabled. - */ - mask = ~(dev->OIMR); - /* Check to see if this is our interrupt. If it isn't just return */ - if (intstat & mask) - { - bellbits = rx_readl(dev, OutboundDoorbellReg); - if (bellbits & DoorBellPrintfReady) { - aac_printf(dev, rx_readl(dev, IndexRegs.Mailbox[5])); - rx_writel(dev, MUnit.ODR,DoorBellPrintfReady); - rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); - } - else if (bellbits & DoorBellAdapterNormCmdReady) { - rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); - aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); - } - else if (bellbits & DoorBellAdapterNormRespReady) { - aac_response_normal(&dev->queues->queue[HostNormRespQueue]); - rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); - } - else if (bellbits & DoorBellAdapterNormCmdNotFull) { - rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); + + dprintk((KERN_DEBUG "aac_rx_intr(%d,%p,%p)\n", irq, dev_id, regs)); + if (dev->new_comm_interface) { + u32 Index = rx_readl(dev, MUnit.OutboundQueue); + if (Index == 0xFFFFFFFFL) + Index = rx_readl(dev, MUnit.OutboundQueue); + if (Index != 0xFFFFFFFFL) { + do { + if (aac_intr_normal(dev, Index)) { + rx_writel(dev, MUnit.OutboundQueue, Index); + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady); + } + Index = rx_readl(dev, MUnit.OutboundQueue); + } while (Index != 0xFFFFFFFFL); + return IRQ_HANDLED; } - else if (bellbits & DoorBellAdapterNormRespNotFull) { - rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); - rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); + } else { + unsigned long bellbits; + u8 intstat; + intstat = rx_readb(dev, MUnit.OISR); + /* + * Read mask and invert because drawbridge is reversed. + * This allows us to only service interrupts that have + * been enabled. + * Check to see if this is our interrupt. If it isn't just return + */ + if (intstat & ~(dev->OIMR)) + { + bellbits = rx_readl(dev, OutboundDoorbellReg); + if (bellbits & DoorBellPrintfReady) { + aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5])); + rx_writel(dev, MUnit.ODR,DoorBellPrintfReady); + rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); + } + else if (bellbits & DoorBellAdapterNormCmdReady) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); + aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); + } + else if (bellbits & DoorBellAdapterNormRespReady) { + rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); + aac_response_normal(&dev->queues->queue[HostNormRespQueue]); + } + else if (bellbits & DoorBellAdapterNormCmdNotFull) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); + } + else if (bellbits & DoorBellAdapterNormRespNotFull) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); + } + return IRQ_HANDLED; } - return IRQ_HANDLED; } return IRQ_NONE; } @@ -173,7 +190,10 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, /* * Restore interrupt mask even though we timed out */ - rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb); + if (dev->new_comm_interface) + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); + else + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); return -ETIMEDOUT; } /* @@ -196,7 +216,10 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, /* * Restore interrupt mask */ - rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb); + if (dev->new_comm_interface) + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); + else + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); return 0; } @@ -267,15 +290,6 @@ static void aac_rx_start_adapter(struct aac_dev *dev) init = dev->init; init->HostElapsedSeconds = cpu_to_le32(get_seconds()); - /* - * First clear out all interrupts. Then enable the one's that we - * can handle. - */ - rx_writeb(dev, MUnit.OIMR, 0xff); - rx_writel(dev, MUnit.ODR, 0xffffffff); -// rx_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK); - rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); - // We can only use a 32 bit address here rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); @@ -349,6 +363,39 @@ static int aac_rx_check_health(struct aac_dev *dev) } /** + * aac_rx_send + * @fib: fib to issue + * + * Will send a fib, returning 0 if successful. + */ +static int aac_rx_send(struct fib * fib) +{ + u64 addr = fib->hw_fib_pa; + struct aac_dev *dev = fib->dev; + volatile void __iomem *device = dev->regs.rx; + u32 Index; + + dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr)); + Index = rx_readl(dev, MUnit.InboundQueue); + if (Index == 0xFFFFFFFFL) + Index = rx_readl(dev, MUnit.InboundQueue); + dprintk((KERN_DEBUG "Index = 0x%x\n", Index)); + if (Index == 0xFFFFFFFFL) + return Index; + device += Index; + dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff), + (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size))); + writel((u32)(addr & 0xffffffff), device); + device += sizeof(u32); + writel((u32)(addr >> 32), device); + device += sizeof(u32); + writel(le16_to_cpu(fib->hw_fib->header.Size), device); + rx_writel(dev, MUnit.InboundQueue, Index); + dprintk((KERN_DEBUG "aac_rx_send - return 0\n")); + return 0; +} + +/** * aac_rx_init - initialize an i960 based AAC card * @dev: device to configure * @@ -368,13 +415,8 @@ int aac_rx_init(struct aac_dev *dev) name = dev->name; /* - * Map in the registers from the adapter. + * Check to see if the board panic'd while booting. */ - if((dev->regs.rx = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL) - { - printk(KERN_WARNING "aacraid: unable to map i960.\n" ); - return -1; - } /* * Check to see if the board failed any self tests. */ @@ -426,6 +468,7 @@ int aac_rx_init(struct aac_dev *dev) dev->a_ops.adapter_notify = aac_rx_notify_adapter; dev->a_ops.adapter_sync_cmd = rx_sync_cmd; dev->a_ops.adapter_check_health = aac_rx_check_health; + dev->a_ops.adapter_send = aac_rx_send; /* * First clear out all interrupts. Then enable the one's that we @@ -437,15 +480,9 @@ int aac_rx_init(struct aac_dev *dev) if (aac_init_adapter(dev) == NULL) goto error_irq; - /* - * Start any kernel threads needed - */ - dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0); - if(dev->thread_pid < 0) - { - printk(KERN_ERR "aacraid: Unable to create rx thread.\n"); - goto error_kfree; - } + if (dev->new_comm_interface) + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); + /* * Tell the adapter that all is configured, and it can start * accepting requests @@ -453,15 +490,11 @@ int aac_rx_init(struct aac_dev *dev) aac_rx_start_adapter(dev); return 0; -error_kfree: - kfree(dev->queues); - error_irq: rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); free_irq(dev->scsi_host_ptr->irq, (void *)dev); error_iounmap: - iounmap(dev->regs.rx); return -1; } |