aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/advansys.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/advansys.c')
-rw-r--r--drivers/scsi/advansys.c18237
1 files changed, 18237 insertions, 0 deletions
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
new file mode 100644
index 00000000000..9962c51dc2a
--- /dev/null
+++ b/drivers/scsi/advansys.c
@@ -0,0 +1,18237 @@
+#define ASC_VERSION "3.3K" /* AdvanSys Driver Version */
+
+/*
+ * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
+ *
+ * Copyright (c) 1995-2000 Advanced System Products, Inc.
+ * Copyright (c) 2000-2001 ConnectCom Solutions, Inc.
+ * All Rights Reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that redistributions of source
+ * code retain the above copyright notice and this comment without
+ * modification.
+ *
+ * As of March 8, 2000 Advanced System Products, Inc. (AdvanSys)
+ * changed its name to ConnectCom Solutions, Inc.
+ *
+ */
+
+/*
+
+ Documentation for the AdvanSys Driver
+
+ A. Linux Kernels Supported by this Driver
+ B. Adapters Supported by this Driver
+ C. Linux source files modified by AdvanSys Driver
+ D. Source Comments
+ E. Driver Compile Time Options and Debugging
+ F. Driver LILO Option
+ G. Tests to run before releasing new driver
+ H. Release History
+ I. Known Problems/Fix List
+ J. Credits (Chronological Order)
+
+ A. Linux Kernels Supported by this Driver
+
+ This driver has been tested in the following Linux kernels: v2.2.18
+ v2.4.0. The driver is supported on v2.2 and v2.4 kernels and on x86,
+ alpha, and PowerPC platforms.
+
+ B. Adapters Supported by this Driver
+
+ AdvanSys (Advanced System Products, Inc.) manufactures the following
+ RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
+ (8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
+ buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
+ transfer) SCSI Host Adapters for the PCI bus.
+
+ The CDB counts below indicate the number of SCSI CDB (Command
+ Descriptor Block) requests that can be stored in the RISC chip
+ cache and board LRAM. A CDB is a single SCSI command. The driver
+ detect routine will display the number of CDBs available for each
+ adapter detected. The number of CDBs used by the driver can be
+ lowered in the BIOS by changing the 'Host Queue Size' adapter setting.
+
+ Laptop Products:
+ ABP-480 - Bus-Master CardBus (16 CDB) (2.4 kernel and greater)
+
+ Connectivity Products:
+ ABP510/5150 - Bus-Master ISA (240 CDB)
+ ABP5140 - Bus-Master ISA PnP (16 CDB)
+ ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
+ ABP902/3902 - Bus-Master PCI (16 CDB)
+ ABP3905 - Bus-Master PCI (16 CDB)
+ ABP915 - Bus-Master PCI (16 CDB)
+ ABP920 - Bus-Master PCI (16 CDB)
+ ABP3922 - Bus-Master PCI (16 CDB)
+ ABP3925 - Bus-Master PCI (16 CDB)
+ ABP930 - Bus-Master PCI (16 CDB)
+ ABP930U - Bus-Master PCI Ultra (16 CDB)
+ ABP930UA - Bus-Master PCI Ultra (16 CDB)
+ ABP960 - Bus-Master PCI MAC/PC (16 CDB)
+ ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB)
+
+ Single Channel Products:
+ ABP542 - Bus-Master ISA with floppy (240 CDB)
+ ABP742 - Bus-Master EISA (240 CDB)
+ ABP842 - Bus-Master VL (240 CDB)
+ ABP940 - Bus-Master PCI (240 CDB)
+ ABP940U - Bus-Master PCI Ultra (240 CDB)
+ ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB)
+ ABP970 - Bus-Master PCI MAC/PC (240 CDB)
+ ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB)
+ ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB)
+ ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB)
+ ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB)
+ ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB)
+
+ Multi-Channel Products:
+ ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel)
+ ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
+ ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel)
+ ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel)
+ ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel)
+ ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel)
+ ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.)
+ ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
+ ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB)
+
+ C. Linux source files modified by AdvanSys Driver
+
+ This section for historical purposes documents the changes
+ originally made to the Linux kernel source to add the advansys
+ driver. As Linux has changed some of these files have also
+ been modified.
+
+ 1. linux/arch/i386/config.in:
+
+ bool 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS y
+
+ 2. linux/drivers/scsi/hosts.c:
+
+ #ifdef CONFIG_SCSI_ADVANSYS
+ #include "advansys.h"
+ #endif
+
+ and after "static Scsi_Host_Template builtin_scsi_hosts[] =":
+
+ #ifdef CONFIG_SCSI_ADVANSYS
+ ADVANSYS,
+ #endif
+
+ 3. linux/drivers/scsi/Makefile:
+
+ ifdef CONFIG_SCSI_ADVANSYS
+ SCSI_SRCS := $(SCSI_SRCS) advansys.c
+ SCSI_OBJS := $(SCSI_OBJS) advansys.o
+ else
+ SCSI_MODULE_OBJS := $(SCSI_MODULE_OBJS) advansys.o
+ endif
+
+ 4. linux/init/main.c:
+
+ extern void advansys_setup(char *str, int *ints);
+
+ and add the following lines to the bootsetups[] array.
+
+ #ifdef CONFIG_SCSI_ADVANSYS
+ { "advansys=", advansys_setup },
+ #endif
+
+ D. Source Comments
+
+ 1. Use tab stops set to 4 for the source files. For vi use 'se tabstops=4'.
+
+ 2. This driver should be maintained in multiple files. But to make
+ it easier to include with Linux and to follow Linux conventions,
+ the whole driver is maintained in the source files advansys.h and
+ advansys.c. In this file logical sections of the driver begin with
+ a comment that contains '---'. The following are the logical sections
+ of the driver below.
+
+ --- Linux Version
+ --- Linux Include File
+ --- Driver Options
+ --- Debugging Header
+ --- Asc Library Constants and Macros
+ --- Adv Library Constants and Macros
+ --- Driver Constants and Macros
+ --- Driver Structures
+ --- Driver Data
+ --- Driver Function Prototypes
+ --- Linux 'Scsi_Host_Template' and advansys_setup() Functions
+ --- Loadable Driver Support
+ --- Miscellaneous Driver Functions
+ --- Functions Required by the Asc Library
+ --- Functions Required by the Adv Library
+ --- Tracing and Debugging Functions
+ --- Asc Library Functions
+ --- Adv Library Functions
+
+ 3. The string 'XXX' is used to flag code that needs to be re-written
+ or that contains a problem that needs to be addressed.
+
+ 4. I have stripped comments from and reformatted the source for the
+ Asc Library and Adv Library to reduce the size of this file. This
+ source can be found under the following headings. The Asc Library
+ is used to support Narrow Boards. The Adv Library is used to
+ support Wide Boards.
+
+ --- Asc Library Constants and Macros
+ --- Adv Library Constants and Macros
+ --- Asc Library Functions
+ --- Adv Library Functions
+
+ E. Driver Compile Time Options and Debugging
+
+ In this source file the following constants can be defined. They are
+ defined in the source below. Both of these options are enabled by
+ default.
+
+ 1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled)
+
+ Enabling this option adds assertion logic statements to the
+ driver. If an assertion fails a message will be displayed to
+ the console, but the system will continue to operate. Any
+ assertions encountered should be reported to the person
+ responsible for the driver. Assertion statements may proactively
+ detect problems with the driver and facilitate fixing these
+ problems. Enabling assertions will add a small overhead to the
+ execution of the driver.
+
+ 2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled)
+
+ Enabling this option adds tracing functions to the driver and
+ the ability to set a driver tracing level at boot time. This
+ option will also export symbols not required outside the driver to
+ the kernel name space. This option is very useful for debugging
+ the driver, but it will add to the size of the driver execution
+ image and add overhead to the execution of the driver.
+
+ The amount of debugging output can be controlled with the global
+ variable 'asc_dbglvl'. The higher the number the more output. By
+ default the debug level is 0.
+
+ If the driver is loaded at boot time and the LILO Driver Option
+ is included in the system, the debug level can be changed by
+ specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The
+ first three hex digits of the pseudo I/O Port must be set to
+ 'deb' and the fourth hex digit specifies the debug level: 0 - F.
+ The following command line will look for an adapter at 0x330
+ and set the debug level to 2.
+
+ linux advansys=0x330,0,0,0,0xdeb2
+
+ If the driver is built as a loadable module this variable can be
+ defined when the driver is loaded. The following insmod command
+ will set the debug level to one.
+
+ insmod advansys.o asc_dbglvl=1
+
+ Debugging Message Levels:
+ 0: Errors Only
+ 1: High-Level Tracing
+ 2-N: Verbose Tracing
+
+ To enable debug output to console, please make sure that:
+
+ a. System and kernel logging is enabled (syslogd, klogd running).
+ b. Kernel messages are routed to console output. Check
+ /etc/syslog.conf for an entry similar to this:
+
+ kern.* /dev/console
+
+ c. klogd is started with the appropriate -c parameter
+ (e.g. klogd -c 8)
+
+ This will cause printk() messages to be be displayed on the
+ current console. Refer to the klogd(8) and syslogd(8) man pages
+ for details.
+
+ Alternatively you can enable printk() to console with this
+ program. However, this is not the 'official' way to do this.
+ Debug output is logged in /var/log/messages.
+
+ main()
+ {
+ syscall(103, 7, 0, 0);
+ }
+
+ Increasing LOG_BUF_LEN in kernel/printk.c to something like
+ 40960 allows more debug messages to be buffered in the kernel
+ and written to the console or log file.
+
+ 3. ADVANSYS_STATS - Enable statistics (Def: Enabled >= v1.3.0)
+
+ Enabling this option adds statistics collection and display
+ through /proc to the driver. The information is useful for
+ monitoring driver and device performance. It will add to the
+ size of the driver execution image and add minor overhead to
+ the execution of the driver.
+
+ Statistics are maintained on a per adapter basis. Driver entry
+ point call counts and transfer size counts are maintained.
+ Statistics are only available for kernels greater than or equal
+ to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured.
+
+ AdvanSys SCSI adapter files have the following path name format:
+
+ /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)]
+
+ This information can be displayed with cat. For example:
+
+ cat /proc/scsi/advansys/0
+
+ When ADVANSYS_STATS is not defined the AdvanSys /proc files only
+ contain adapter and device configuration information.
+
+ F. Driver LILO Option
+
+ If init/main.c is modified as described in the 'Directions for Adding
+ the AdvanSys Driver to Linux' section (B.4.) above, the driver will
+ recognize the 'advansys' LILO command line and /etc/lilo.conf option.
+ This option can be used to either disable I/O port scanning or to limit
+ scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
+ PCI boards will still be searched for and detected. This option only
+ affects searching for ISA and VL boards.
+
+ Examples:
+ 1. Eliminate I/O port scanning:
+ boot: linux advansys=
+ or
+ boot: linux advansys=0x0
+ 2. Limit I/O port scanning to one I/O port:
+ boot: linux advansys=0x110
+ 3. Limit I/O port scanning to four I/O ports:
+ boot: linux advansys=0x110,0x210,0x230,0x330
+
+ For a loadable module the same effect can be achieved by setting
+ the 'asc_iopflag' variable and 'asc_ioport' array when loading
+ the driver, e.g.
+
+ insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330
+
+ If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1)
+ I/O Port may be added to specify the driver debug level. Refer to
+ the 'Driver Compile Time Options and Debugging' section above for
+ more information.
+
+ G. Tests to run before releasing new driver
+
+ 1. In the supported kernels verify there are no warning or compile
+ errors when the kernel is built as both a driver and as a module
+ and with the following options:
+
+ ADVANSYS_DEBUG - enabled and disabled
+ CONFIG_SMP - enabled and disabled
+ CONFIG_PROC_FS - enabled and disabled
+
+ 2. Run tests on an x86, alpha, and PowerPC with at least one narrow
+ card and one wide card attached to a hard disk and CD-ROM drive:
+ fdisk, mkfs, fsck, bonnie, copy/compare test from the
+ CD-ROM to the hard drive.
+
+ H. Release History
+
+ BETA-1.0 (12/23/95):
+ First Release
+
+ BETA-1.1 (12/28/95):
+ 1. Prevent advansys_detect() from being called twice.
+ 2. Add LILO 0xdeb[0-f] option to set 'asc_dbglvl'.
+
+ 1.2 (1/12/96):
+ 1. Prevent re-entrancy in the interrupt handler which
+ resulted in the driver hanging Linux.
+ 2. Fix problem that prevented ABP-940 cards from being
+ recognized on some PCI motherboards.
+ 3. Add support for the ABP-5140 PnP ISA card.
+ 4. Fix check condition return status.
+ 5. Add conditionally compiled code for Linux v1.3.X.
+
+ 1.3 (2/23/96):
+ 1. Fix problem in advansys_biosparam() that resulted in the
+ wrong drive geometry being returned for drives > 1GB with
+ extended translation enabled.
+ 2. Add additional tracing during device initialization.
+ 3. Change code that only applies to ISA PnP adapter.
+ 4. Eliminate 'make dep' warning.
+ 5. Try to fix problem with handling resets by increasing their
+ timeout value.
+
+ 1.4 (5/8/96):
+ 1. Change definitions to eliminate conflicts with other subsystems.
+ 2. Add versioning code for the shared interrupt changes.
+ 3. Eliminate problem in asc_rmqueue() with iterating after removing
+ a request.
+ 4. Remove reset request loop problem from the "Known Problems or
+ Issues" section. This problem was isolated and fixed in the
+ mid-level SCSI driver.
+
+ 1.5 (8/8/96):
+ 1. Add support for ABP-940U (PCI Ultra) adapter.
+ 2. Add support for IRQ sharing by setting the SA_SHIRQ flag for
+ request_irq and supplying a dev_id pointer to both request_irq()
+ and free_irq().
+ 3. In AscSearchIOPortAddr11() restore a call to check_region() which
+ should be used before I/O port probing.
+ 4. Fix bug in asc_prt_hex() which resulted in the displaying
+ the wrong data.
+ 5. Incorporate miscellaneous Asc Library bug fixes and new microcode.
+ 6. Change driver versioning to be specific to each Linux sub-level.
+ 7. Change statistics gathering to be per adapter instead of global
+ to the driver.
+ 8. Add more information and statistics to the adapter /proc file:
+ /proc/scsi/advansys[0...].
+ 9. Remove 'cmd_per_lun' from the "Known Problems or Issues" list.
+ This problem has been addressed with the SCSI mid-level changes
+ made in v1.3.89. The advansys_select_queue_depths() function
+ was added for the v1.3.89 changes.
+
+ 1.6 (9/10/96):
+ 1. Incorporate miscellaneous Asc Library bug fixes and new microcode.
+
+ 1.7 (9/25/96):
+ 1. Enable clustering and optimize the setting of the maximum number
+ of scatter gather elements for any particular board. Clustering
+ increases CPU utilization, but results in a relatively larger
+ increase in I/O throughput.
+ 2. Improve the performance of the request queuing functions by
+ adding a last pointer to the queue structure.
+ 3. Correct problems with reset and abort request handling that
+ could have hung or crashed Linux.
+ 4. Add more information to the adapter /proc file:
+ /proc/scsi/advansys[0...].
+ 5. Remove the request timeout issue form the driver issues list.
+ 6. Miscellaneous documentation additions and changes.
+
+ 1.8 (10/4/96):
+ 1. Make changes to handle the new v2.1.0 kernel memory mapping
+ in which a kernel virtual address may not be equivalent to its
+ bus or DMA memory address.
+ 2. Change abort and reset request handling to make it yet even
+ more robust.
+ 3. Try to mitigate request starvation by sending ordered requests
+ to heavily loaded, tag queuing enabled devices.
+ 4. Maintain statistics on request response time.
+ 5. Add request response time statistics and other information to
+ the adapter /proc file: /proc/scsi/advansys[0...].
+
+ 1.9 (10/21/96):
+ 1. Add conditionally compiled code (ASC_QUEUE_FLOW_CONTROL) to
+ make use of mid-level SCSI driver device queue depth flow
+ control mechanism. This will eliminate aborts caused by a
+ device being unable to keep up with requests and eliminate
+ repeat busy or QUEUE FULL status returned by a device.
+ 2. Incorporate miscellaneous Asc Library bug fixes.
+ 3. To allow the driver to work in kernels with broken module
+ support set 'cmd_per_lun' if the driver is compiled as a
+ module. This change affects kernels v1.3.89 to present.
+ 4. Remove PCI BIOS address from the driver banner. The PCI BIOS
+ is relocated by the motherboard BIOS and its new address can
+ not be determined by the driver.
+ 5. Add mid-level SCSI queue depth information to the adapter
+ /proc file: /proc/scsi/advansys[0...].
+
+ 2.0 (11/14/96):
+ 1. Change allocation of global structures used for device
+ initialization to guarantee they are in DMA-able memory.
+ Previously when the driver was loaded as a module these
+ structures might not have been in DMA-able memory, causing
+ device initialization to fail.
+
+ 2.1 (12/30/96):
+ 1. In advansys_reset(), if the request is a synchronous reset
+ request, even if the request serial number has changed, then
+ complete the request.
+ 2. Add Asc Library bug fixes including new microcode.
+ 3. Clear inquiry buffer before using it.
+ 4. Correct ifdef typo.
+
+ 2.2 (1/15/97):
+ 1. Add Asc Library bug fixes including new microcode.
+ 2. Add synchronous data transfer rate information to the
+ adapter /proc file: /proc/scsi/advansys[0...].
+ 3. Change ADVANSYS_DEBUG to be disabled by default. This
+ will reduce the size of the driver image, eliminate execution
+ overhead, and remove unneeded symbols from the kernel symbol
+ space that were previously added by the driver.
+ 4. Add new compile-time option ADVANSYS_ASSERT for assertion
+ code that used to be defined within ADVANSYS_DEBUG. This
+ option is enabled by default.
+
+ 2.8 (5/26/97):
+ 1. Change version number to 2.8 to synchronize the Linux driver
+ version numbering with other AdvanSys drivers.
+ 2. Reformat source files without tabs to present the same view
+ of the file to everyone regardless of the editor tab setting
+ being used.
+ 3. Add Asc Library bug fixes.
+
+ 3.1A (1/8/98):
+ 1. Change version number to 3.1 to indicate that support for
+ Ultra-Wide adapters (ABP-940UW) is included in this release.
+ 2. Add Asc Library (Narrow Board) bug fixes.
+ 3. Report an underrun condition with the host status byte set
+ to DID_UNDERRUN. Currently DID_UNDERRUN is defined to 0 which
+ causes the underrun condition to be ignored. When Linux defines
+ its own DID_UNDERRUN the constant defined in this file can be
+ removed.
+ 4. Add patch to AscWaitTixISRDone().
+ 5. Add support for up to 16 different AdvanSys host adapter SCSI
+ channels in one system. This allows four cards with four channels
+ to be used in one system.
+
+ 3.1B (1/9/98):
+ 1. Handle that PCI register base addresses are not always page
+ aligned even though ioremap() requires that the address argument
+ be page aligned.
+
+ 3.1C (1/10/98):
+ 1. Update latest BIOS version checked for from the /proc file.
+ 2. Don't set microcode SDTR variable at initialization. Instead
+ wait until device capabilities have been detected from an Inquiry
+ command.
+
+ 3.1D (1/21/98):
+ 1. Improve performance when the driver is compiled as module by
+ allowing up to 64 scatter-gather elements instead of 8.
+
+ 3.1E (5/1/98):
+ 1. Set time delay in AscWaitTixISRDone() to 1000 ms.
+ 2. Include SMP locking changes.
+ 3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS
+ access functions.
+ 4. Update board serial number printing.
+ 5. Try allocating an IRQ both with and without the SA_INTERRUPT
+ flag set to allow IRQ sharing with drivers that do not set
+ the SA_INTERRUPT flag. Also display a more descriptive error
+ message if request_irq() fails.
+ 6. Update to latest Asc and Adv Libraries.
+
+ 3.2A (7/22/99):
+ 1. Update Adv Library to 4.16 which includes support for
+ the ASC38C0800 (Ultra2/LVD) IC.
+
+ 3.2B (8/23/99):
+ 1. Correct PCI compile time option for v2.1.93 and greater
+ kernels, advansys_info() string, and debug compile time
+ option.
+ 2. Correct DvcSleepMilliSecond() for v2.1.0 and greater
+ kernels. This caused an LVD detection/BIST problem problem
+ among other things.
+ 3. Sort PCI cards by PCI Bus, Slot, Function ascending order
+ to be consistent with the BIOS.
+ 4. Update to Asc Library S121 and Adv Library 5.2.
+
+ 3.2C (8/24/99):
+ 1. Correct PCI card detection bug introduced in 3.2B that
+ prevented PCI cards from being detected in kernels older
+ than v2.1.93.
+
+ 3.2D (8/26/99):
+ 1. Correct /proc device synchronous speed information display.
+ Also when re-negotiation is pending for a target device
+ note this condition with an * and footnote.
+ 2. Correct initialization problem with Ultra-Wide cards that
+ have a pre-3.2 BIOS. A microcode variable changed locations
+ in 3.2 and greater BIOSes which caused WDTR to be attempted
+ erroneously with drives that don't support WDTR.
+
+ 3.2E (8/30/99):
+ 1. Fix compile error caused by v2.3.13 PCI structure change.
+ 2. Remove field from ASCEEP_CONFIG that resulted in an EEPROM
+ checksum error for ISA cards.
+ 3. Remove ASC_QUEUE_FLOW_CONTROL conditional code. The mid-level
+ SCSI changes that it depended on were never included in Linux.
+
+ 3.2F (9/3/99):
+ 1. Handle new initial function code added in v2.3.16 for all
+ driver versions.
+
+ 3.2G (9/8/99):
+ 1. Fix PCI board detection in v2.3.13 and greater kernels.
+ 2. Fix comiple errors in v2.3.X with debugging enabled.
+
+ 3.2H (9/13/99):
+ 1. Add 64-bit address, long support for Alpha and UltraSPARC.
+ The driver has been verified to work on an Alpha system.
+ 2. Add partial byte order handling support for Power PC and
+ other big-endian platforms. This support has not yet been
+ completed or verified.
+ 3. For wide boards replace block zeroing of request and
+ scatter-gather structures with individual field initialization
+ to improve performance.
+ 4. Correct and clarify ROM BIOS version detection.
+
+ 3.2I (10/8/99):
+ 1. Update to Adv Library 5.4.
+ 2. Add v2.3.19 underrun reporting to asc_isr_callback() and
+ adv_isr_callback(). Remove DID_UNDERRUN constant and other
+ no longer needed code that previously documented the lack
+ of underrun handling.
+
+ 3.2J (10/14/99):
+ 1. Eliminate compile errors for v2.0 and earlier kernels.
+
+ 3.2K (11/15/99):
+ 1. Correct debug compile error in asc_prt_adv_scsi_req_q().
+ 2. Update Adv Library to 5.5.
+ 3. Add ifdef handling for /proc changes added in v2.3.28.
+ 4. Increase Wide board scatter-gather list maximum length to
+ 255 when the driver is compiled into the kernel.
+
+ 3.2L (11/18/99):
+ 1. Fix bug in adv_get_sglist() that caused an assertion failure
+ at line 7475. The reqp->sgblkp pointer must be initialized
+ to NULL in adv_get_sglist().
+
+ 3.2M (11/29/99):
+ 1. Really fix bug in adv_get_sglist().
+ 2. Incorporate v2.3.29 changes into driver.
+
+ 3.2N (4/1/00):
+ 1. Add CONFIG_ISA ifdef code.
+ 2. Include advansys_interrupts_enabled name change patch.
+ 3. For >= v2.3.28 use new SCSI error handling with new function
+ advansys_eh_bus_reset(). Don't include an abort function
+ because of base library limitations.
+ 4. For >= v2.3.28 use per board lock instead of io_request_lock.
+ 5. For >= v2.3.28 eliminate advansys_command() and
+ advansys_command_done().
+ 6. Add some changes for PowerPC (Big Endian) support, but it isn't
+ working yet.
+ 7. Fix "nonexistent resource free" problem that occurred on a module
+ unload for boards with an I/O space >= 255. The 'n_io_port' field
+ is only one byte and can not be used to hold an ioport length more
+ than 255.
+
+ 3.3A (4/4/00):
+ 1. Update to Adv Library 5.8.
+ 2. For wide cards add support for CDBs up to 16 bytes.
+ 3. Eliminate warnings when CONFIG_PROC_FS is not defined.
+
+ 3.3B (5/1/00):
+ 1. Support for PowerPC (Big Endian) wide cards. Narrow cards
+ still need work.
+ 2. Change bitfields to shift and mask access for endian
+ portability.
+
+ 3.3C (10/13/00):
+ 1. Update for latest 2.4 kernel.
+ 2. Test ABP-480 CardBus support in 2.4 kernel - works!
+ 3. Update to Asc Library S123.
+ 4. Update to Adv Library 5.12.
+
+ 3.3D (11/22/00):
+ 1. Update for latest 2.4 kernel.
+ 2. Create patches for 2.2 and 2.4 kernels.
+
+ 3.3E (1/9/01):
+ 1. Now that 2.4 is released remove ifdef code for kernel versions
+ less than 2.2. The driver is now only supported in kernels 2.2,
+ 2.4, and greater.
+ 2. Add code to release and acquire the io_request_lock in
+ the driver entrypoint functions: advansys_detect and
+ advansys_queuecommand. In kernel 2.4 the SCSI mid-level driver
+ still holds the io_request_lock on entry to SCSI low-level drivers.
+ This was supposed to be removed before 2.4 was released but never
+ happened. When the mid-level SCSI driver is changed all references
+ to the io_request_lock should be removed from the driver.
+ 3. Simplify error handling by removing advansys_abort(),
+ AscAbortSRB(), AscResetDevice(). SCSI bus reset requests are
+ now handled by resetting the SCSI bus and fully re-initializing
+ the chip. This simple method of error recovery has proven to work
+ most reliably after attempts at different methods. Also now only
+ support the "new" error handling method and remove the obsolete
+ error handling interface.
+ 4. Fix debug build errors.
+
+ 3.3F (1/24/01):
+ 1. Merge with ConnectCom version from Andy Kellner which
+ updates Adv Library to 5.14.
+ 2. Make PowerPC (Big Endian) work for narrow cards and
+ fix problems writing EEPROM for wide cards.
+ 3. Remove interrupts_enabled assertion function.
+
+ 3.3G (2/16/01):
+ 1. Return an error from narrow boards if passed a 16 byte
+ CDB. The wide board can already handle 16 byte CDBs.
+
+ 3.3GJ (4/15/02):
+ 1. hacks for lk 2.5 series (D. Gilbert)
+
+ 3.3GJD (10/14/02):
+ 1. change select_queue_depths to slave_configure
+ 2. make cmd_per_lun be sane again
+
+ 3.3K [2004/06/24]:
+ 1. continuing cleanup for lk 2.6 series
+ 2. Fix problem in lk 2.6.7-bk2 that broke PCI wide cards
+ 3. Fix problem that oopsed ISA cards
+
+ I. Known Problems/Fix List (XXX)
+
+ 1. Need to add memory mapping workaround. Test the memory mapping.
+ If it doesn't work revert to I/O port access. Can a test be done
+ safely?
+ 2. Handle an interrupt not working. Keep an interrupt counter in
+ the interrupt handler. In the timeout function if the interrupt
+ has not occurred then print a message and run in polled mode.
+ 3. Allow bus type scanning order to be changed.
+ 4. Need to add support for target mode commands, cf. CAM XPT.
+
+ J. Credits (Chronological Order)
+
+ Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver
+ and maintained it up to 3.3F. He continues to answer questions
+ and help maintain the driver.
+
+ Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
+ basis for the Linux v1.3.X changes which were included in the
+ 1.2 release.
+
+ Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug
+ in advansys_biosparam() which was fixed in the 1.3 release.
+
+ Erik Ratcliffe <erik@caldera.com> has done testing of the
+ AdvanSys driver in the Caldera releases.
+
+ Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to
+ AscWaitTixISRDone() which he found necessary to make the
+ driver work with a SCSI-1 disk.
+
+ Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide
+ support in the 3.1A driver.
+
+ Doug Gilbert <dgilbert@interlog.com> has made changes and
+ suggestions to improve the driver and done a lot of testing.
+
+ Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed
+ in 3.2K.
+
+ Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA
+ patch and helped with PowerPC wide and narrow board support.
+
+ Philip Blundell <philb@gnu.org> provided an
+ advansys_interrupts_enabled patch.
+
+ Dave Jones <dave@denial.force9.co.uk> reported the compiler
+ warnings generated when CONFIG_PROC_FS was not defined in
+ the 3.2M driver.
+
+ Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian
+ problems) for wide cards.
+
+ Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow
+ card error handling.
+
+ Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow
+ board support and fixed a bug in AscGetEEPConfig().
+
+ Arnaldo Carvalho de Melo <acme@conectiva.com.br> made
+ save_flags/restore_flags changes.
+
+ Andy Kellner <AKellner@connectcom.net> continues the Advansys SCSI
+ driver development for ConnectCom (Version > 3.3F).
+
+ K. ConnectCom (AdvanSys) Contact Information
+
+ Mail: ConnectCom Solutions, Inc.
+ 1150 Ringwood Court
+ San Jose, CA 95131
+ Operator/Sales: 1-408-383-9400
+ FAX: 1-408-383-9612
+ Tech Support: 1-408-467-2930
+ Tech Support E-Mail: linux@connectcom.net
+ FTP Site: ftp.connectcom.net (login: anonymous)
+ Web Site: http://www.connectcom.net
+
+*/
+
+/*
+ * --- Linux Include Files
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#if defined(CONFIG_X86) && !defined(CONFIG_ISA)
+#define CONFIG_ISA
+#endif /* CONFIG_X86 && !CONFIG_ISA */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/stat.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+
+/* FIXME: (by jejb@steeleye.com) This warning is present for two
+ * reasons:
+ *
+ * 1) This driver badly needs converting to the correct driver model
+ * probing API
+ *
+ * 2) Although all of the necessary command mapping places have the
+ * appropriate dma_map.. APIs, the driver still processes its internal
+ * queue using bus_to_virt() and virt_to_bus() which are illegal under
+ * the API. The entire queue processing structure will need to be
+ * altered to fix this.
+ */
+#warning this driver is still not properly converted to the DMA API
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include "advansys.h"
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif /* CONFIG_PCI */
+
+
+/*
+ * --- Driver Options
+ */
+
+/* Enable driver assertions. */
+#define ADVANSYS_ASSERT
+
+/* Enable driver /proc statistics. */
+#define ADVANSYS_STATS
+
+/* Enable driver tracing. */
+/* #define ADVANSYS_DEBUG */
+
+
+/*
+ * --- Debugging Header
+ */
+
+#ifdef ADVANSYS_DEBUG
+#define STATIC
+#else /* ADVANSYS_DEBUG */
+#define STATIC static
+#endif /* ADVANSYS_DEBUG */
+
+
+/*
+ * --- Asc Library Constants and Macros
+ */
+
+#define ASC_LIB_VERSION_MAJOR 1
+#define ASC_LIB_VERSION_MINOR 24
+#define ASC_LIB_SERIAL_NUMBER 123
+
+/*
+ * Portable Data Types
+ *
+ * Any instance where a 32-bit long or pointer type is assumed
+ * for precision or HW defined structures, the following define
+ * types must be used. In Linux the char, short, and int types
+ * are all consistent at 8, 16, and 32 bits respectively. Pointers
+ * and long types are 64 bits on Alpha and UltraSPARC.
+ */
+#define ASC_PADDR __u32 /* Physical/Bus address data type. */
+#define ASC_VADDR __u32 /* Virtual address data type. */
+#define ASC_DCNT __u32 /* Unsigned Data count type. */
+#define ASC_SDCNT __s32 /* Signed Data count type. */
+
+/*
+ * These macros are used to convert a virtual address to a
+ * 32-bit value. This currently can be used on Linux Alpha
+ * which uses 64-bit virtual address but a 32-bit bus address.
+ * This is likely to break in the future, but doing this now
+ * will give us time to change the HW and FW to handle 64-bit
+ * addresses.
+ */
+#define ASC_VADDR_TO_U32 virt_to_bus
+#define ASC_U32_TO_VADDR bus_to_virt
+
+typedef unsigned char uchar;
+
+#ifndef TRUE
+#define TRUE (1)
+#endif
+#ifndef FALSE
+#define FALSE (0)
+#endif
+
+#define EOF (-1)
+#define ERR (-1)
+#define UW_ERR (uint)(0xFFFF)
+#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
+#define AscPCIConfigVendorIDRegister 0x0000
+#define AscPCIConfigDeviceIDRegister 0x0002
+#define AscPCIConfigCommandRegister 0x0004
+#define AscPCIConfigStatusRegister 0x0006
+#define AscPCIConfigRevisionIDRegister 0x0008
+#define AscPCIConfigCacheSize 0x000C
+#define AscPCIConfigLatencyTimer 0x000D
+#define AscPCIIOBaseRegister 0x0010
+#define AscPCICmdRegBits_IOMemBusMaster 0x0007
+#define ASC_PCI_ID2BUS(id) ((id) & 0xFF)
+#define ASC_PCI_ID2DEV(id) (((id) >> 11) & 0x1F)
+#define ASC_PCI_ID2FUNC(id) (((id) >> 8) & 0x7)
+#define ASC_PCI_MKID(bus, dev, func) ((((dev) & 0x1F) << 11) | (((func) & 0x7) << 8) | ((bus) & 0xFF))
+#define ASC_PCI_VENDORID 0x10CD
+#define ASC_PCI_DEVICEID_1200A 0x1100
+#define ASC_PCI_DEVICEID_1200B 0x1200
+#define ASC_PCI_DEVICEID_ULTRA 0x1300
+#define ASC_PCI_REVISION_3150 0x02
+#define ASC_PCI_REVISION_3050 0x03
+
+#define ASC_DVCLIB_CALL_DONE (1)
+#define ASC_DVCLIB_CALL_FAILED (0)
+#define ASC_DVCLIB_CALL_ERROR (-1)
+
+/*
+ * Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists.
+ * The SRB structure will have to be changed and the ASC_SRB2SCSIQ()
+ * macro re-defined to be able to obtain a ASC_SCSI_Q pointer from the
+ * SRB structure.
+ */
+#define CC_VERY_LONG_SG_LIST 0
+#define ASC_SRB2SCSIQ(srb_ptr) (srb_ptr)
+
+#define PortAddr unsigned short /* port address size */
+#define inp(port) inb(port)
+#define outp(port, byte) outb((byte), (port))
+
+#define inpw(port) inw(port)
+#define outpw(port, word) outw((word), (port))
+
+#define ASC_MAX_SG_QUEUE 7
+#define ASC_MAX_SG_LIST 255
+
+#define ASC_CS_TYPE unsigned short
+
+#define ASC_IS_ISA (0x0001)
+#define ASC_IS_ISAPNP (0x0081)
+#define ASC_IS_EISA (0x0002)
+#define ASC_IS_PCI (0x0004)
+#define ASC_IS_PCI_ULTRA (0x0104)
+#define ASC_IS_PCMCIA (0x0008)
+#define ASC_IS_MCA (0x0020)
+#define ASC_IS_VL (0x0040)
+#define ASC_ISA_PNP_PORT_ADDR (0x279)
+#define ASC_ISA_PNP_PORT_WRITE (ASC_ISA_PNP_PORT_ADDR+0x800)
+#define ASC_IS_WIDESCSI_16 (0x0100)
+#define ASC_IS_WIDESCSI_32 (0x0200)
+#define ASC_IS_BIG_ENDIAN (0x8000)
+#define ASC_CHIP_MIN_VER_VL (0x01)
+#define ASC_CHIP_MAX_VER_VL (0x07)
+#define ASC_CHIP_MIN_VER_PCI (0x09)
+#define ASC_CHIP_MAX_VER_PCI (0x0F)
+#define ASC_CHIP_VER_PCI_BIT (0x08)
+#define ASC_CHIP_MIN_VER_ISA (0x11)
+#define ASC_CHIP_MIN_VER_ISA_PNP (0x21)
+#define ASC_CHIP_MAX_VER_ISA (0x27)
+#define ASC_CHIP_VER_ISA_BIT (0x30)
+#define ASC_CHIP_VER_ISAPNP_BIT (0x20)
+#define ASC_CHIP_VER_ASYN_BUG (0x21)
+#define ASC_CHIP_VER_PCI 0x08
+#define ASC_CHIP_VER_PCI_ULTRA_3150 (ASC_CHIP_VER_PCI | 0x02)
+#define ASC_CHIP_VER_PCI_ULTRA_3050 (ASC_CHIP_VER_PCI | 0x03)
+#define ASC_CHIP_MIN_VER_EISA (0x41)
+#define ASC_CHIP_MAX_VER_EISA (0x47)
+#define ASC_CHIP_VER_EISA_BIT (0x40)
+#define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3)
+#define ASC_MAX_LIB_SUPPORTED_ISA_CHIP_VER 0x21
+#define ASC_MAX_LIB_SUPPORTED_PCI_CHIP_VER 0x0A
+#define ASC_MAX_VL_DMA_ADDR (0x07FFFFFFL)
+#define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL)
+#define ASC_MAX_PCI_DMA_ADDR (0xFFFFFFFFL)
+#define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL)
+#define ASC_MAX_ISA_DMA_ADDR (0x00FFFFFFL)
+#define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL)
+#define ASC_MAX_EISA_DMA_ADDR (0x07FFFFFFL)
+#define ASC_MAX_EISA_DMA_COUNT (0x07FFFFFFL)
+
+#define ASC_SCSI_ID_BITS 3
+#define ASC_SCSI_TIX_TYPE uchar
+#define ASC_ALL_DEVICE_BIT_SET 0xFF
+#define ASC_SCSI_BIT_ID_TYPE uchar
+#define ASC_MAX_TID 7
+#define ASC_MAX_LUN 7
+#define ASC_SCSI_WIDTH_BIT_SET 0xFF
+#define ASC_MAX_SENSE_LEN 32
+#define ASC_MIN_SENSE_LEN 14
+#define ASC_MAX_CDB_LEN 12
+#define ASC_SCSI_RESET_HOLD_TIME_US 60
+
+#define ADV_INQ_CLOCKING_ST_ONLY 0x0
+#define ADV_INQ_CLOCKING_DT_ONLY 0x1
+#define ADV_INQ_CLOCKING_ST_AND_DT 0x3
+
+/*
+ * Inquiry SPC-2 SPI Byte 1 EVPD (Enable Vital Product Data)
+ * and CmdDt (Command Support Data) field bit definitions.
+ */
+#define ADV_INQ_RTN_VPD_AND_CMDDT 0x3
+#define ADV_INQ_RTN_CMDDT_FOR_OP_CODE 0x2
+#define ADV_INQ_RTN_VPD_FOR_PG_CODE 0x1
+#define ADV_INQ_RTN_STD_INQUIRY_DATA 0x0
+
+#define ASC_SCSIDIR_NOCHK 0x00
+#define ASC_SCSIDIR_T2H 0x08
+#define ASC_SCSIDIR_H2T 0x10
+#define ASC_SCSIDIR_NODATA 0x18
+#define SCSI_ASC_NOMEDIA 0x3A
+#define ASC_SRB_HOST(x) ((uchar)((uchar)(x) >> 4))
+#define ASC_SRB_TID(x) ((uchar)((uchar)(x) & (uchar)0x0F))
+#define ASC_SRB_LUN(x) ((uchar)((uint)(x) >> 13))
+#define PUT_CDB1(x) ((uchar)((uint)(x) >> 8))
+#define MS_CMD_DONE 0x00
+#define MS_EXTEND 0x01
+#define MS_SDTR_LEN 0x03
+#define MS_SDTR_CODE 0x01
+#define MS_WDTR_LEN 0x02
+#define MS_WDTR_CODE 0x03
+#define MS_MDP_LEN 0x05
+#define MS_MDP_CODE 0x00
+
+/*
+ * Inquiry data structure and bitfield macros
+ *
+ * Only quantities of more than 1 bit are shifted, since the others are
+ * just tested for true or false. C bitfields aren't portable between big
+ * and little-endian platforms so they are not used.
+ */
+
+#define ASC_INQ_DVC_TYPE(inq) ((inq)->periph & 0x1f)
+#define ASC_INQ_QUALIFIER(inq) (((inq)->periph & 0xe0) >> 5)
+#define ASC_INQ_DVC_TYPE_MOD(inq) ((inq)->devtype & 0x7f)
+#define ASC_INQ_REMOVABLE(inq) ((inq)->devtype & 0x80)
+#define ASC_INQ_ANSI_VER(inq) ((inq)->ver & 0x07)
+#define ASC_INQ_ECMA_VER(inq) (((inq)->ver & 0x38) >> 3)
+#define ASC_INQ_ISO_VER(inq) (((inq)->ver & 0xc0) >> 6)
+#define ASC_INQ_RESPONSE_FMT(inq) ((inq)->byte3 & 0x0f)
+#define ASC_INQ_TERM_IO(inq) ((inq)->byte3 & 0x40)
+#define ASC_INQ_ASYNC_NOTIF(inq) ((inq)->byte3 & 0x80)
+#define ASC_INQ_SOFT_RESET(inq) ((inq)->flags & 0x01)
+#define ASC_INQ_CMD_QUEUE(inq) ((inq)->flags & 0x02)
+#define ASC_INQ_LINK_CMD(inq) ((inq)->flags & 0x08)
+#define ASC_INQ_SYNC(inq) ((inq)->flags & 0x10)
+#define ASC_INQ_WIDE16(inq) ((inq)->flags & 0x20)
+#define ASC_INQ_WIDE32(inq) ((inq)->flags & 0x40)
+#define ASC_INQ_REL_ADDR(inq) ((inq)->flags & 0x80)
+#define ASC_INQ_INFO_UNIT(inq) ((inq)->info & 0x01)
+#define ASC_INQ_QUICK_ARB(inq) ((inq)->info & 0x02)
+#define ASC_INQ_CLOCKING(inq) (((inq)->info & 0x0c) >> 2)
+
+typedef struct {
+ uchar periph;
+ uchar devtype;
+ uchar ver;
+ uchar byte3;
+ uchar add_len;
+ uchar res1;
+ uchar res2;
+ uchar flags;
+ uchar vendor_id[8];
+ uchar product_id[16];
+ uchar product_rev_level[4];
+} ASC_SCSI_INQUIRY;
+
+#define ASC_SG_LIST_PER_Q 7
+#define QS_FREE 0x00
+#define QS_READY 0x01
+#define QS_DISC1 0x02
+#define QS_DISC2 0x04
+#define QS_BUSY 0x08
+#define QS_ABORTED 0x40
+#define QS_DONE 0x80
+#define QC_NO_CALLBACK 0x01
+#define QC_SG_SWAP_QUEUE 0x02
+#define QC_SG_HEAD 0x04
+#define QC_DATA_IN 0x08
+#define QC_DATA_OUT 0x10
+#define QC_URGENT 0x20
+#define QC_MSG_OUT 0x40
+#define QC_REQ_SENSE 0x80
+#define QCSG_SG_XFER_LIST 0x02
+#define QCSG_SG_XFER_MORE 0x04
+#define QCSG_SG_XFER_END 0x08
+#define QD_IN_PROGRESS 0x00
+#define QD_NO_ERROR 0x01
+#define QD_ABORTED_BY_HOST 0x02
+#define QD_WITH_ERROR 0x04
+#define QD_INVALID_REQUEST 0x80
+#define QD_INVALID_HOST_NUM 0x81
+#define QD_INVALID_DEVICE 0x82
+#define QD_ERR_INTERNAL 0xFF
+#define QHSTA_NO_ERROR 0x00
+#define QHSTA_M_SEL_TIMEOUT 0x11
+#define QHSTA_M_DATA_OVER_RUN 0x12
+#define QHSTA_M_DATA_UNDER_RUN 0x12
+#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13
+#define QHSTA_M_BAD_BUS_PHASE_SEQ 0x14
+#define QHSTA_D_QDONE_SG_LIST_CORRUPTED 0x21
+#define QHSTA_D_ASC_DVC_ERROR_CODE_SET 0x22
+#define QHSTA_D_HOST_ABORT_FAILED 0x23
+#define QHSTA_D_EXE_SCSI_Q_FAILED 0x24
+#define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT 0x25
+#define QHSTA_D_ASPI_NO_BUF_POOL 0x26
+#define QHSTA_M_WTM_TIMEOUT 0x41
+#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42
+#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43
+#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44
+#define QHSTA_M_TARGET_STATUS_BUSY 0x45
+#define QHSTA_M_BAD_TAG_CODE 0x46
+#define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY 0x47
+#define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET 0x48
+#define QHSTA_D_LRAM_CMP_ERROR 0x81
+#define QHSTA_M_MICRO_CODE_ERROR_HALT 0xA1
+#define ASC_FLAG_SCSIQ_REQ 0x01
+#define ASC_FLAG_BIOS_SCSIQ_REQ 0x02
+#define ASC_FLAG_BIOS_ASYNC_IO 0x04
+#define ASC_FLAG_SRB_LINEAR_ADDR 0x08
+#define ASC_FLAG_WIN16 0x10
+#define ASC_FLAG_WIN32 0x20
+#define ASC_FLAG_ISA_OVER_16MB 0x40
+#define ASC_FLAG_DOS_VM_CALLBACK 0x80
+#define ASC_TAG_FLAG_EXTRA_BYTES 0x10
+#define ASC_TAG_FLAG_DISABLE_DISCONNECT 0x04
+#define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX 0x08
+#define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST 0x40
+#define ASC_SCSIQ_CPY_BEG 4
+#define ASC_SCSIQ_SGHD_CPY_BEG 2
+#define ASC_SCSIQ_B_FWD 0
+#define ASC_SCSIQ_B_BWD 1
+#define ASC_SCSIQ_B_STATUS 2
+#define ASC_SCSIQ_B_QNO 3
+#define ASC_SCSIQ_B_CNTL 4
+#define ASC_SCSIQ_B_SG_QUEUE_CNT 5
+#define ASC_SCSIQ_D_DATA_ADDR 8
+#define ASC_SCSIQ_D_DATA_CNT 12
+#define ASC_SCSIQ_B_SENSE_LEN 20
+#define ASC_SCSIQ_DONE_INFO_BEG 22
+#define ASC_SCSIQ_D_SRBPTR 22
+#define ASC_SCSIQ_B_TARGET_IX 26
+#define ASC_SCSIQ_B_CDB_LEN 28
+#define ASC_SCSIQ_B_TAG_CODE 29
+#define ASC_SCSIQ_W_VM_ID 30
+#define ASC_SCSIQ_DONE_STATUS 32
+#define ASC_SCSIQ_HOST_STATUS 33
+#define ASC_SCSIQ_SCSI_STATUS 34
+#define ASC_SCSIQ_CDB_BEG 36
+#define ASC_SCSIQ_DW_REMAIN_XFER_ADDR 56
+#define ASC_SCSIQ_DW_REMAIN_XFER_CNT 60
+#define ASC_SCSIQ_B_FIRST_SG_WK_QP 48
+#define ASC_SCSIQ_B_SG_WK_QP 49
+#define ASC_SCSIQ_B_SG_WK_IX 50
+#define ASC_SCSIQ_W_ALT_DC1 52
+#define ASC_SCSIQ_B_LIST_CNT 6
+#define ASC_SCSIQ_B_CUR_LIST_CNT 7
+#define ASC_SGQ_B_SG_CNTL 4
+#define ASC_SGQ_B_SG_HEAD_QP 5
+#define ASC_SGQ_B_SG_LIST_CNT 6
+#define ASC_SGQ_B_SG_CUR_LIST_CNT 7
+#define ASC_SGQ_LIST_BEG 8
+#define ASC_DEF_SCSI1_QNG 4
+#define ASC_MAX_SCSI1_QNG 4
+#define ASC_DEF_SCSI2_QNG 16
+#define ASC_MAX_SCSI2_QNG 32
+#define ASC_TAG_CODE_MASK 0x23
+#define ASC_STOP_REQ_RISC_STOP 0x01
+#define ASC_STOP_ACK_RISC_STOP 0x03
+#define ASC_STOP_CLEAN_UP_BUSY_Q 0x10
+#define ASC_STOP_CLEAN_UP_DISC_Q 0x20
+#define ASC_STOP_HOST_REQ_RISC_HALT 0x40
+#define ASC_TIDLUN_TO_IX(tid, lun) (ASC_SCSI_TIX_TYPE)((tid) + ((lun)<<ASC_SCSI_ID_BITS))
+#define ASC_TID_TO_TARGET_ID(tid) (ASC_SCSI_BIT_ID_TYPE)(0x01 << (tid))
+#define ASC_TIX_TO_TARGET_ID(tix) (0x01 << ((tix) & ASC_MAX_TID))
+#define ASC_TIX_TO_TID(tix) ((tix) & ASC_MAX_TID)
+#define ASC_TID_TO_TIX(tid) ((tid) & ASC_MAX_TID)
+#define ASC_TIX_TO_LUN(tix) (((tix) >> ASC_SCSI_ID_BITS) & ASC_MAX_LUN)
+#define ASC_QNO_TO_QADDR(q_no) ((ASC_QADR_BEG)+((int)(q_no) << 6))
+
+typedef struct asc_scsiq_1 {
+ uchar status;
+ uchar q_no;
+ uchar cntl;
+ uchar sg_queue_cnt;
+ uchar target_id;
+ uchar target_lun;
+ ASC_PADDR data_addr;
+ ASC_DCNT data_cnt;
+ ASC_PADDR sense_addr;
+ uchar sense_len;
+ uchar extra_bytes;
+} ASC_SCSIQ_1;
+
+typedef struct asc_scsiq_2 {
+ ASC_VADDR srb_ptr;
+ uchar target_ix;
+ uchar flag;
+ uchar cdb_len;
+ uchar tag_code;
+ ushort vm_id;
+} ASC_SCSIQ_2;
+
+typedef struct asc_scsiq_3 {
+ uchar done_stat;
+ uchar host_stat;
+ uchar scsi_stat;
+ uchar scsi_msg;
+} ASC_SCSIQ_3;
+
+typedef struct asc_scsiq_4 {
+ uchar cdb[ASC_MAX_CDB_LEN];
+ uchar y_first_sg_list_qp;
+ uchar y_working_sg_qp;
+ uchar y_working_sg_ix;
+ uchar y_res;
+ ushort x_req_count;
+ ushort x_reconnect_rtn;
+ ASC_PADDR x_saved_data_addr;
+ ASC_DCNT x_saved_data_cnt;
+} ASC_SCSIQ_4;
+
+typedef struct asc_q_done_info {
+ ASC_SCSIQ_2 d2;
+ ASC_SCSIQ_3 d3;
+ uchar q_status;
+ uchar q_no;
+ uchar cntl;
+ uchar sense_len;
+ uchar extra_bytes;
+ uchar res;
+ ASC_DCNT remain_bytes;
+} ASC_QDONE_INFO;
+
+typedef struct asc_sg_list {
+ ASC_PADDR addr;
+ ASC_DCNT bytes;
+} ASC_SG_LIST;
+
+typedef struct asc_sg_head {
+ ushort entry_cnt;
+ ushort queue_cnt;
+ ushort entry_to_copy;
+ ushort res;
+ ASC_SG_LIST sg_list[ASC_MAX_SG_LIST];
+} ASC_SG_HEAD;
+
+#define ASC_MIN_SG_LIST 2
+
+typedef struct asc_min_sg_head {
+ ushort entry_cnt;
+ ushort queue_cnt;
+ ushort entry_to_copy;
+ ushort res;
+ ASC_SG_LIST sg_list[ASC_MIN_SG_LIST];
+} ASC_MIN_SG_HEAD;
+
+#define QCX_SORT (0x0001)
+#define QCX_COALEASE (0x0002)
+
+typedef struct asc_scsi_q {
+ ASC_SCSIQ_1 q1;
+ ASC_SCSIQ_2 q2;
+ uchar *cdbptr;
+ ASC_SG_HEAD *sg_head;
+ ushort remain_sg_entry_cnt;
+ ushort next_sg_index;
+} ASC_SCSI_Q;
+
+typedef struct asc_scsi_req_q {
+ ASC_SCSIQ_1 r1;
+ ASC_SCSIQ_2 r2;
+ uchar *cdbptr;
+ ASC_SG_HEAD *sg_head;
+ uchar *sense_ptr;
+ ASC_SCSIQ_3 r3;
+ uchar cdb[ASC_MAX_CDB_LEN];
+ uchar sense[ASC_MIN_SENSE_LEN];
+} ASC_SCSI_REQ_Q;
+
+typedef struct asc_scsi_bios_req_q {
+ ASC_SCSIQ_1 r1;
+ ASC_SCSIQ_2 r2;
+ uchar *cdbptr;
+ ASC_SG_HEAD *sg_head;
+ uchar *sense_ptr;
+ ASC_SCSIQ_3 r3;
+ uchar cdb[ASC_MAX_CDB_LEN];
+ uchar sense[ASC_MIN_SENSE_LEN];
+} ASC_SCSI_BIOS_REQ_Q;
+
+typedef struct asc_risc_q {
+ uchar fwd;
+ uchar bwd;
+ ASC_SCSIQ_1 i1;
+ ASC_SCSIQ_2 i2;
+ ASC_SCSIQ_3 i3;
+ ASC_SCSIQ_4 i4;
+} ASC_RISC_Q;
+
+typedef struct asc_sg_list_q {
+ uchar seq_no;
+ uchar q_no;
+ uchar cntl;
+ uchar sg_head_qp;
+ uchar sg_list_cnt;
+ uchar sg_cur_list_cnt;
+} ASC_SG_LIST_Q;
+
+typedef struct asc_risc_sg_list_q {
+ uchar fwd;
+ uchar bwd;
+ ASC_SG_LIST_Q sg;
+ ASC_SG_LIST sg_list[7];
+} ASC_RISC_SG_LIST_Q;
+
+#define ASC_EXE_SCSI_IO_MAX_IDLE_LOOP 0x1000000UL
+#define ASC_EXE_SCSI_IO_MAX_WAIT_LOOP 1024
+#define ASCQ_ERR_NO_ERROR 0
+#define ASCQ_ERR_IO_NOT_FOUND 1
+#define ASCQ_ERR_LOCAL_MEM 2
+#define ASCQ_ERR_CHKSUM 3
+#define ASCQ_ERR_START_CHIP 4
+#define ASCQ_ERR_INT_TARGET_ID 5
+#define ASCQ_ERR_INT_LOCAL_MEM 6
+#define ASCQ_ERR_HALT_RISC 7
+#define ASCQ_ERR_GET_ASPI_ENTRY 8
+#define ASCQ_ERR_CLOSE_ASPI 9
+#define ASCQ_ERR_HOST_INQUIRY 0x0A
+#define ASCQ_ERR_SAVED_SRB_BAD 0x0B
+#define ASCQ_ERR_QCNTL_SG_LIST 0x0C
+#define ASCQ_ERR_Q_STATUS 0x0D
+#define ASCQ_ERR_WR_SCSIQ 0x0E
+#define ASCQ_ERR_PC_ADDR 0x0F
+#define ASCQ_ERR_SYN_OFFSET 0x10
+#define ASCQ_ERR_SYN_XFER_TIME 0x11
+#define ASCQ_ERR_LOCK_DMA 0x12
+#define ASCQ_ERR_UNLOCK_DMA 0x13
+#define ASCQ_ERR_VDS_CHK_INSTALL 0x14
+#define ASCQ_ERR_MICRO_CODE_HALT 0x15
+#define ASCQ_ERR_SET_LRAM_ADDR 0x16
+#define ASCQ_ERR_CUR_QNG 0x17
+#define ASCQ_ERR_SG_Q_LINKS 0x18
+#define ASCQ_ERR_SCSIQ_PTR 0x19
+#define ASCQ_ERR_ISR_RE_ENTRY 0x1A
+#define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B
+#define ASCQ_ERR_ISR_ON_CRITICAL 0x1C
+#define ASCQ_ERR_SG_LIST_ODD_ADDRESS 0x1D
+#define ASCQ_ERR_XFER_ADDRESS_TOO_BIG 0x1E
+#define ASCQ_ERR_SCSIQ_NULL_PTR 0x1F
+#define ASCQ_ERR_SCSIQ_BAD_NEXT_PTR 0x20
+#define ASCQ_ERR_GET_NUM_OF_FREE_Q 0x21
+#define ASCQ_ERR_SEND_SCSI_Q 0x22
+#define ASCQ_ERR_HOST_REQ_RISC_HALT 0x23
+#define ASCQ_ERR_RESET_SDTR 0x24
+
+/*
+ * Warning code values are set in ASC_DVC_VAR 'warn_code'.
+ */
+#define ASC_WARN_NO_ERROR 0x0000
+#define ASC_WARN_IO_PORT_ROTATE 0x0001
+#define ASC_WARN_EEPROM_CHKSUM 0x0002
+#define ASC_WARN_IRQ_MODIFIED 0x0004
+#define ASC_WARN_AUTO_CONFIG 0x0008
+#define ASC_WARN_CMD_QNG_CONFLICT 0x0010
+#define ASC_WARN_EEPROM_RECOVER 0x0020
+#define ASC_WARN_CFG_MSW_RECOVER 0x0040
+#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080
+
+/*
+ * Error code values are set in ASC_DVC_VAR 'err_code'.
+ */
+#define ASC_IERR_WRITE_EEPROM 0x0001
+#define ASC_IERR_MCODE_CHKSUM 0x0002
+#define ASC_IERR_SET_PC_ADDR 0x0004
+#define ASC_IERR_START_STOP_CHIP 0x0008
+#define ASC_IERR_IRQ_NO 0x0010
+#define ASC_IERR_SET_IRQ_NO 0x0020
+#define ASC_IERR_CHIP_VERSION 0x0040
+#define ASC_IERR_SET_SCSI_ID 0x0080
+#define ASC_IERR_GET_PHY_ADDR 0x0100
+#define ASC_IERR_BAD_SIGNATURE 0x0200
+#define ASC_IERR_NO_BUS_TYPE 0x0400
+#define ASC_IERR_SCAM 0x0800
+#define ASC_IERR_SET_SDTR 0x1000
+#define ASC_IERR_RW_LRAM 0x8000
+
+#define ASC_DEF_IRQ_NO 10
+#define ASC_MAX_IRQ_NO 15
+#define ASC_MIN_IRQ_NO 10
+#define ASC_MIN_REMAIN_Q (0x02)
+#define ASC_DEF_MAX_TOTAL_QNG (0xF0)
+#define ASC_MIN_TAG_Q_PER_DVC (0x04)
+#define ASC_DEF_TAG_Q_PER_DVC (0x04)
+#define ASC_MIN_FREE_Q ASC_MIN_REMAIN_Q
+#define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q))
+#define ASC_MAX_TOTAL_QNG 240
+#define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16
+#define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8
+#define ASC_MAX_PCI_INRAM_TOTAL_QNG 20
+#define ASC_MAX_INRAM_TAG_QNG 16
+#define ASC_IOADR_TABLE_MAX_IX 11
+#define ASC_IOADR_GAP 0x10
+#define ASC_SEARCH_IOP_GAP 0x10
+#define ASC_MIN_IOP_ADDR (PortAddr)0x0100
+#define ASC_MAX_IOP_ADDR (PortAddr)0x3F0
+#define ASC_IOADR_1 (PortAddr)0x0110
+#define ASC_IOADR_2 (PortAddr)0x0130
+#define ASC_IOADR_3 (PortAddr)0x0150
+#define ASC_IOADR_4 (PortAddr)0x0190
+#define ASC_IOADR_5 (PortAddr)0x0210
+#define ASC_IOADR_6 (PortAddr)0x0230
+#define ASC_IOADR_7 (PortAddr)0x0250
+#define ASC_IOADR_8 (PortAddr)0x0330
+#define ASC_IOADR_DEF ASC_IOADR_8
+#define ASC_LIB_SCSIQ_WK_SP 256
+#define ASC_MAX_SYN_XFER_NO 16
+#define ASC_SYN_MAX_OFFSET 0x0F
+#define ASC_DEF_SDTR_OFFSET 0x0F
+#define ASC_DEF_SDTR_INDEX 0x00
+#define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02
+#define SYN_XFER_NS_0 25
+#define SYN_XFER_NS_1 30
+#define SYN_XFER_NS_2 35
+#define SYN_XFER_NS_3 40
+#define SYN_XFER_NS_4 50
+#define SYN_XFER_NS_5 60
+#define SYN_XFER_NS_6 70
+#define SYN_XFER_NS_7 85
+#define SYN_ULTRA_XFER_NS_0 12
+#define SYN_ULTRA_XFER_NS_1 19
+#define SYN_ULTRA_XFER_NS_2 25
+#define SYN_ULTRA_XFER_NS_3 32
+#define SYN_ULTRA_XFER_NS_4 38
+#define SYN_ULTRA_XFER_NS_5 44
+#define SYN_ULTRA_XFER_NS_6 50
+#define SYN_ULTRA_XFER_NS_7 57
+#define SYN_ULTRA_XFER_NS_8 63
+#define SYN_ULTRA_XFER_NS_9 69
+#define SYN_ULTRA_XFER_NS_10 75
+#define SYN_ULTRA_XFER_NS_11 82
+#define SYN_ULTRA_XFER_NS_12 88
+#define SYN_ULTRA_XFER_NS_13 94
+#define SYN_ULTRA_XFER_NS_14 100
+#define SYN_ULTRA_XFER_NS_15 107
+
+typedef struct ext_msg {
+ uchar msg_type;
+ uchar msg_len;
+ uchar msg_req;
+ union {
+ struct {
+ uchar sdtr_xfer_period;
+ uchar sdtr_req_ack_offset;
+ } sdtr;
+ struct {
+ uchar wdtr_width;
+ } wdtr;
+ struct {
+ uchar mdp_b3;
+ uchar mdp_b2;
+ uchar mdp_b1;
+ uchar mdp_b0;
+ } mdp;
+ } u_ext_msg;
+ uchar res;
+} EXT_MSG;
+
+#define xfer_period u_ext_msg.sdtr.sdtr_xfer_period
+#define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset
+#define wdtr_width u_ext_msg.wdtr.wdtr_width
+#define mdp_b3 u_ext_msg.mdp_b3
+#define mdp_b2 u_ext_msg.mdp_b2
+#define mdp_b1 u_ext_msg.mdp_b1
+#define mdp_b0 u_ext_msg.mdp_b0
+
+typedef struct asc_dvc_cfg {
+ ASC_SCSI_BIT_ID_TYPE can_tagged_qng;
+ ASC_SCSI_BIT_ID_TYPE cmd_qng_enabled;
+ ASC_SCSI_BIT_ID_TYPE disc_enable;
+ ASC_SCSI_BIT_ID_TYPE sdtr_enable;
+ uchar chip_scsi_id;
+ uchar isa_dma_speed;
+ uchar isa_dma_channel;
+ uchar chip_version;
+ ushort lib_serial_no;
+ ushort lib_version;
+ ushort mcode_date;
+ ushort mcode_version;
+ uchar max_tag_qng[ASC_MAX_TID + 1];
+ uchar *overrun_buf;
+ uchar sdtr_period_offset[ASC_MAX_TID + 1];
+ ushort pci_slot_info;
+ uchar adapter_info[6];
+ struct device *dev;
+} ASC_DVC_CFG;
+
+#define ASC_DEF_DVC_CNTL 0xFFFF
+#define ASC_DEF_CHIP_SCSI_ID 7
+#define ASC_DEF_ISA_DMA_SPEED 4
+#define ASC_INIT_STATE_NULL 0x0000
+#define ASC_INIT_STATE_BEG_GET_CFG 0x0001
+#define ASC_INIT_STATE_END_GET_CFG 0x0002
+#define ASC_INIT_STATE_BEG_SET_CFG 0x0004
+#define ASC_INIT_STATE_END_SET_CFG 0x0008
+#define ASC_INIT_STATE_BEG_LOAD_MC 0x0010
+#define ASC_INIT_STATE_END_LOAD_MC 0x0020
+#define ASC_INIT_STATE_BEG_INQUIRY 0x0040
+#define ASC_INIT_STATE_END_INQUIRY 0x0080
+#define ASC_INIT_RESET_SCSI_DONE 0x0100
+#define ASC_INIT_STATE_WITHOUT_EEP 0x8000
+#define ASC_PCI_DEVICE_ID_REV_A 0x1100
+#define ASC_PCI_DEVICE_ID_REV_B 0x1200
+#define ASC_BUG_FIX_IF_NOT_DWB 0x0001
+#define ASC_BUG_FIX_ASYN_USE_SYN 0x0002
+#define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41
+#define ASC_MIN_TAGGED_CMD 7
+#define ASC_MAX_SCSI_RESET_WAIT 30
+
+struct asc_dvc_var; /* Forward Declaration. */
+
+typedef void (* ASC_ISR_CALLBACK)(struct asc_dvc_var *, ASC_QDONE_INFO *);
+typedef int (* ASC_EXE_CALLBACK)(struct asc_dvc_var *, ASC_SCSI_Q *);
+
+typedef struct asc_dvc_var {
+ PortAddr iop_base;
+ ushort err_code;
+ ushort dvc_cntl;
+ ushort bug_fix_cntl;
+ ushort bus_type;
+ ASC_ISR_CALLBACK isr_callback;
+ ASC_EXE_CALLBACK exe_callback;
+ ASC_SCSI_BIT_ID_TYPE init_sdtr;
+ ASC_SCSI_BIT_ID_TYPE sdtr_done;
+ ASC_SCSI_BIT_ID_TYPE use_tagged_qng;
+ ASC_SCSI_BIT_ID_TYPE unit_not_ready;
+ ASC_SCSI_BIT_ID_TYPE queue_full_or_busy;
+ ASC_SCSI_BIT_ID_TYPE start_motor;
+ uchar scsi_reset_wait;
+ uchar chip_no;
+ char is_in_int;
+ uchar max_total_qng;
+ uchar cur_total_qng;
+ uchar in_critical_cnt;
+ uchar irq_no;
+ uchar last_q_shortage;
+ ushort init_state;
+ uchar cur_dvc_qng[ASC_MAX_TID + 1];
+ uchar max_dvc_qng[ASC_MAX_TID + 1];
+ ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID + 1];
+ ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID + 1];
+ uchar sdtr_period_tbl[ASC_MAX_SYN_XFER_NO];
+ ASC_DVC_CFG *cfg;
+ ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer_always;
+ char redo_scam;
+ ushort res2;
+ uchar dos_int13_table[ASC_MAX_TID + 1];
+ ASC_DCNT max_dma_count;
+ ASC_SCSI_BIT_ID_TYPE no_scam;
+ ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer;
+ uchar max_sdtr_index;
+ uchar host_init_sdtr_index;
+ struct asc_board *drv_ptr;
+ ASC_DCNT uc_break;
+} ASC_DVC_VAR;
+
+typedef struct asc_dvc_inq_info {
+ uchar type[ASC_MAX_TID + 1][ASC_MAX_LUN + 1];
+} ASC_DVC_INQ_INFO;
+
+typedef struct asc_cap_info {
+ ASC_DCNT lba;
+ ASC_DCNT blk_size;
+} ASC_CAP_INFO;
+
+typedef struct asc_cap_info_array {
+ ASC_CAP_INFO cap_info[ASC_MAX_TID + 1][ASC_MAX_LUN + 1];
+} ASC_CAP_INFO_ARRAY;
+
+#define ASC_MCNTL_NO_SEL_TIMEOUT (ushort)0x0001
+#define ASC_MCNTL_NULL_TARGET (ushort)0x0002
+#define ASC_CNTL_INITIATOR (ushort)0x0001
+#define ASC_CNTL_BIOS_GT_1GB (ushort)0x0002
+#define ASC_CNTL_BIOS_GT_2_DISK (ushort)0x0004
+#define ASC_CNTL_BIOS_REMOVABLE (ushort)0x0008
+#define ASC_CNTL_NO_SCAM (ushort)0x0010
+#define ASC_CNTL_INT_MULTI_Q (ushort)0x0080
+#define ASC_CNTL_NO_LUN_SUPPORT (ushort)0x0040
+#define ASC_CNTL_NO_VERIFY_COPY (ushort)0x0100
+#define ASC_CNTL_RESET_SCSI (ushort)0x0200
+#define ASC_CNTL_INIT_INQUIRY (ushort)0x0400
+#define ASC_CNTL_INIT_VERBOSE (ushort)0x0800
+#define ASC_CNTL_SCSI_PARITY (ushort)0x1000
+#define ASC_CNTL_BURST_MODE (ushort)0x2000
+#define ASC_CNTL_SDTR_ENABLE_ULTRA (ushort)0x4000
+#define ASC_EEP_DVC_CFG_BEG_VL 2
+#define ASC_EEP_MAX_DVC_ADDR_VL 15
+#define ASC_EEP_DVC_CFG_BEG 32
+#define ASC_EEP_MAX_DVC_ADDR 45
+#define ASC_EEP_DEFINED_WORDS 10
+#define ASC_EEP_MAX_ADDR 63
+#define ASC_EEP_RES_WORDS 0
+#define ASC_EEP_MAX_RETRY 20
+#define ASC_MAX_INIT_BUSY_RETRY 8
+#define ASC_EEP_ISA_PNP_WSIZE 16
+
+/*
+ * These macros keep the chip SCSI id and ISA DMA speed
+ * bitfields in board order. C bitfields aren't portable
+ * between big and little-endian platforms so they are
+ * not used.
+ */
+
+#define ASC_EEP_GET_CHIP_ID(cfg) ((cfg)->id_speed & 0x0f)
+#define ASC_EEP_GET_DMA_SPD(cfg) (((cfg)->id_speed & 0xf0) >> 4)
+#define ASC_EEP_SET_CHIP_ID(cfg, sid) \
+ ((cfg)->id_speed = ((cfg)->id_speed & 0xf0) | ((sid) & ASC_MAX_TID))
+#define ASC_EEP_SET_DMA_SPD(cfg, spd) \
+ ((cfg)->id_speed = ((cfg)->id_speed & 0x0f) | ((spd) & 0x0f) << 4)
+
+typedef struct asceep_config {
+ ushort cfg_lsw;
+ ushort cfg_msw;
+ uchar init_sdtr;
+ uchar disc_enable;
+ uchar use_cmd_qng;
+ uchar start_motor;
+ uchar max_total_qng;
+ uchar max_tag_qng;
+ uchar bios_scan;
+ uchar power_up_wait;
+ uchar no_scam;
+ uchar id_speed; /* low order 4 bits is chip scsi id */
+ /* high order 4 bits is isa dma speed */
+ uchar dos_int13_table[ASC_MAX_TID + 1];
+ uchar adapter_info[6];
+ ushort cntl;
+ ushort chksum;
+} ASCEEP_CONFIG;
+
+#define ASC_PCI_CFG_LSW_SCSI_PARITY 0x0800
+#define ASC_PCI_CFG_LSW_BURST_MODE 0x0080
+#define ASC_PCI_CFG_LSW_INTR_ABLE 0x0020
+
+#define ASC_EEP_CMD_READ 0x80
+#define ASC_EEP_CMD_WRITE 0x40
+#define ASC_EEP_CMD_WRITE_ABLE 0x30
+#define ASC_EEP_CMD_WRITE_DISABLE 0x00
+#define ASC_OVERRUN_BSIZE 0x00000048UL
+#define ASC_CTRL_BREAK_ONCE 0x0001
+#define ASC_CTRL_BREAK_STAY_IDLE 0x0002
+#define ASCV_MSGOUT_BEG 0x0000
+#define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3)
+#define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4)
+#define ASCV_BREAK_SAVED_CODE (ushort)0x0006
+#define ASCV_MSGIN_BEG (ASCV_MSGOUT_BEG+8)
+#define ASCV_MSGIN_SDTR_PERIOD (ASCV_MSGIN_BEG+3)
+#define ASCV_MSGIN_SDTR_OFFSET (ASCV_MSGIN_BEG+4)
+#define ASCV_SDTR_DATA_BEG (ASCV_MSGIN_BEG+8)
+#define ASCV_SDTR_DONE_BEG (ASCV_SDTR_DATA_BEG+8)
+#define ASCV_MAX_DVC_QNG_BEG (ushort)0x0020
+#define ASCV_BREAK_ADDR (ushort)0x0028
+#define ASCV_BREAK_NOTIFY_COUNT (ushort)0x002A
+#define ASCV_BREAK_CONTROL (ushort)0x002C
+#define ASCV_BREAK_HIT_COUNT (ushort)0x002E
+
+#define ASCV_ASCDVC_ERR_CODE_W (ushort)0x0030
+#define ASCV_MCODE_CHKSUM_W (ushort)0x0032
+#define ASCV_MCODE_SIZE_W (ushort)0x0034
+#define ASCV_STOP_CODE_B (ushort)0x0036
+#define ASCV_DVC_ERR_CODE_B (ushort)0x0037
+#define ASCV_OVERRUN_PADDR_D (ushort)0x0038
+#define ASCV_OVERRUN_BSIZE_D (ushort)0x003C
+#define ASCV_HALTCODE_W (ushort)0x0040
+#define ASCV_CHKSUM_W (ushort)0x0042
+#define ASCV_MC_DATE_W (ushort)0x0044
+#define ASCV_MC_VER_W (ushort)0x0046
+#define ASCV_NEXTRDY_B (ushort)0x0048
+#define ASCV_DONENEXT_B (ushort)0x0049
+#define ASCV_USE_TAGGED_QNG_B (ushort)0x004A
+#define ASCV_SCSIBUSY_B (ushort)0x004B
+#define ASCV_Q_DONE_IN_PROGRESS_B (ushort)0x004C
+#define ASCV_CURCDB_B (ushort)0x004D
+#define ASCV_RCLUN_B (ushort)0x004E
+#define ASCV_BUSY_QHEAD_B (ushort)0x004F
+#define ASCV_DISC1_QHEAD_B (ushort)0x0050
+#define ASCV_DISC_ENABLE_B (ushort)0x0052
+#define ASCV_CAN_TAGGED_QNG_B (ushort)0x0053
+#define ASCV_HOSTSCSI_ID_B (ushort)0x0055
+#define ASCV_MCODE_CNTL_B (ushort)0x0056
+#define ASCV_NULL_TARGET_B (ushort)0x0057
+#define ASCV_FREE_Q_HEAD_W (ushort)0x0058
+#define ASCV_DONE_Q_TAIL_W (ushort)0x005A
+#define ASCV_FREE_Q_HEAD_B (ushort)(ASCV_FREE_Q_HEAD_W+1)
+#define ASCV_DONE_Q_TAIL_B (ushort)(ASCV_DONE_Q_TAIL_W+1)
+#define ASCV_HOST_FLAG_B (ushort)0x005D
+#define ASCV_TOTAL_READY_Q_B (ushort)0x0064
+#define ASCV_VER_SERIAL_B (ushort)0x0065
+#define ASCV_HALTCODE_SAVED_W (ushort)0x0066
+#define ASCV_WTM_FLAG_B (ushort)0x0068
+#define ASCV_RISC_FLAG_B (ushort)0x006A
+#define ASCV_REQ_SG_LIST_QP (ushort)0x006B
+#define ASC_HOST_FLAG_IN_ISR 0x01
+#define ASC_HOST_FLAG_ACK_INT 0x02
+#define ASC_RISC_FLAG_GEN_INT 0x01
+#define ASC_RISC_FLAG_REQ_SG_LIST 0x02
+#define IOP_CTRL (0x0F)
+#define IOP_STATUS (0x0E)
+#define IOP_INT_ACK IOP_STATUS
+#define IOP_REG_IFC (0x0D)
+#define IOP_SYN_OFFSET (0x0B)
+#define IOP_EXTRA_CONTROL (0x0D)
+#define IOP_REG_PC (0x0C)
+#define IOP_RAM_ADDR (0x0A)
+#define IOP_RAM_DATA (0x08)
+#define IOP_EEP_DATA (0x06)
+#define IOP_EEP_CMD (0x07)
+#define IOP_VERSION (0x03)
+#define IOP_CONFIG_HIGH (0x04)
+#define IOP_CONFIG_LOW (0x02)
+#define IOP_SIG_BYTE (0x01)
+#define IOP_SIG_WORD (0x00)
+#define IOP_REG_DC1 (0x0E)
+#define IOP_REG_DC0 (0x0C)
+#define IOP_REG_SB (0x0B)
+#define IOP_REG_DA1 (0x0A)
+#define IOP_REG_DA0 (0x08)
+#define IOP_REG_SC (0x09)
+#define IOP_DMA_SPEED (0x07)
+#define IOP_REG_FLAG (0x07)
+#define IOP_FIFO_H (0x06)
+#define IOP_FIFO_L (0x04)
+#define IOP_REG_ID (0x05)
+#define IOP_REG_QP (0x03)
+#define IOP_REG_IH (0x02)
+#define IOP_REG_IX (0x01)
+#define IOP_REG_AX (0x00)
+#define IFC_REG_LOCK (0x00)
+#define IFC_REG_UNLOCK (0x09)
+#define IFC_WR_EN_FILTER (0x10)
+#define IFC_RD_NO_EEPROM (0x10)
+#define IFC_SLEW_RATE (0x20)
+#define IFC_ACT_NEG (0x40)
+#define IFC_INP_FILTER (0x80)
+#define IFC_INIT_DEFAULT (IFC_ACT_NEG | IFC_REG_UNLOCK)
+#define SC_SEL (uchar)(0x80)
+#define SC_BSY (uchar)(0x40)
+#define SC_ACK (uchar)(0x20)
+#define SC_REQ (uchar)(0x10)
+#define SC_ATN (uchar)(0x08)
+#define SC_IO (uchar)(0x04)
+#define SC_CD (uchar)(0x02)
+#define SC_MSG (uchar)(0x01)
+#define SEC_SCSI_CTL (uchar)(0x80)
+#define SEC_ACTIVE_NEGATE (uchar)(0x40)
+#define SEC_SLEW_RATE (uchar)(0x20)
+#define SEC_ENABLE_FILTER (uchar)(0x10)
+#define ASC_HALT_EXTMSG_IN (ushort)0x8000
+#define ASC_HALT_CHK_CONDITION (ushort)0x8100
+#define ASC_HALT_SS_QUEUE_FULL (ushort)0x8200
+#define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX (ushort)0x8300
+#define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX (ushort)0x8400
+#define ASC_HALT_SDTR_REJECTED (ushort)0x4000
+#define ASC_HALT_HOST_COPY_SG_LIST_TO_RISC ( ushort )0x2000
+#define ASC_MAX_QNO 0xF8
+#define ASC_DATA_SEC_BEG (ushort)0x0080
+#define ASC_DATA_SEC_END (ushort)0x0080
+#define ASC_CODE_SEC_BEG (ushort)0x0080
+#define ASC_CODE_SEC_END (ushort)0x0080
+#define ASC_QADR_BEG (0x4000)
+#define ASC_QADR_USED (ushort)(ASC_MAX_QNO * 64)
+#define ASC_QADR_END (ushort)0x7FFF
+#define ASC_QLAST_ADR (ushort)0x7FC0
+#define ASC_QBLK_SIZE 0x40
+#define ASC_BIOS_DATA_QBEG 0xF8
+#define ASC_MIN_ACTIVE_QNO 0x01
+#define ASC_QLINK_END 0xFF
+#define ASC_EEPROM_WORDS 0x10
+#define ASC_MAX_MGS_LEN 0x10
+#define ASC_BIOS_ADDR_DEF 0xDC00
+#define ASC_BIOS_SIZE 0x3800
+#define ASC_BIOS_RAM_OFF 0x3800
+#define ASC_BIOS_RAM_SIZE 0x800
+#define ASC_BIOS_MIN_ADDR 0xC000
+#define ASC_BIOS_MAX_ADDR 0xEC00
+#define ASC_BIOS_BANK_SIZE 0x0400
+#define ASC_MCODE_START_ADDR 0x0080
+#define ASC_CFG0_HOST_INT_ON 0x0020
+#define ASC_CFG0_BIOS_ON 0x0040
+#define ASC_CFG0_VERA_BURST_ON 0x0080
+#define ASC_CFG0_SCSI_PARITY_ON 0x0800
+#define ASC_CFG1_SCSI_TARGET_ON 0x0080
+#define ASC_CFG1_LRAM_8BITS_ON 0x0800
+#define ASC_CFG_MSW_CLR_MASK 0x3080
+#define CSW_TEST1 (ASC_CS_TYPE)0x8000
+#define CSW_AUTO_CONFIG (ASC_CS_TYPE)0x4000
+#define CSW_RESERVED1 (ASC_CS_TYPE)0x2000
+#define CSW_IRQ_WRITTEN (ASC_CS_TYPE)0x1000
+#define CSW_33MHZ_SELECTED (ASC_CS_TYPE)0x0800
+#define CSW_TEST2 (ASC_CS_TYPE)0x0400
+#define CSW_TEST3 (ASC_CS_TYPE)0x0200
+#define CSW_RESERVED2 (ASC_CS_TYPE)0x0100
+#define CSW_DMA_DONE (ASC_CS_TYPE)0x0080
+#define CSW_FIFO_RDY (ASC_CS_TYPE)0x0040
+#define CSW_EEP_READ_DONE (ASC_CS_TYPE)0x0020
+#define CSW_HALTED (ASC_CS_TYPE)0x0010
+#define CSW_SCSI_RESET_ACTIVE (ASC_CS_TYPE)0x0008
+#define CSW_PARITY_ERR (ASC_CS_TYPE)0x0004
+#define CSW_SCSI_RESET_LATCH (ASC_CS_TYPE)0x0002
+#define CSW_INT_PENDING (ASC_CS_TYPE)0x0001
+#define CIW_CLR_SCSI_RESET_INT (ASC_CS_TYPE)0x1000
+#define CIW_INT_ACK (ASC_CS_TYPE)0x0100
+#define CIW_TEST1 (ASC_CS_TYPE)0x0200
+#define CIW_TEST2 (ASC_CS_TYPE)0x0400
+#define CIW_SEL_33MHZ (ASC_CS_TYPE)0x0800
+#define CIW_IRQ_ACT (ASC_CS_TYPE)0x1000
+#define CC_CHIP_RESET (uchar)0x80
+#define CC_SCSI_RESET (uchar)0x40
+#define CC_HALT (uchar)0x20
+#define CC_SINGLE_STEP (uchar)0x10
+#define CC_DMA_ABLE (uchar)0x08
+#define CC_TEST (uchar)0x04
+#define CC_BANK_ONE (uchar)0x02
+#define CC_DIAG (uchar)0x01
+#define ASC_1000_ID0W 0x04C1
+#define ASC_1000_ID0W_FIX 0x00C1
+#define ASC_1000_ID1B 0x25
+#define ASC_EISA_BIG_IOP_GAP (0x1C30-0x0C50)
+#define ASC_EISA_SMALL_IOP_GAP (0x0020)
+#define ASC_EISA_MIN_IOP_ADDR (0x0C30)
+#define ASC_EISA_MAX_IOP_ADDR (0xFC50)
+#define ASC_EISA_REV_IOP_MASK (0x0C83)
+#define ASC_EISA_PID_IOP_MASK (0x0C80)
+#define ASC_EISA_CFG_IOP_MASK (0x0C86)
+#define ASC_GET_EISA_SLOT(iop) (PortAddr)((iop) & 0xF000)
+#define ASC_EISA_ID_740 0x01745004UL
+#define ASC_EISA_ID_750 0x01755004UL
+#define INS_HALTINT (ushort)0x6281
+#define INS_HALT (ushort)0x6280
+#define INS_SINT (ushort)0x6200
+#define INS_RFLAG_WTM (ushort)0x7380
+#define ASC_MC_SAVE_CODE_WSIZE 0x500
+#define ASC_MC_SAVE_DATA_WSIZE 0x40
+
+typedef struct asc_mc_saved {
+ ushort data[ASC_MC_SAVE_DATA_WSIZE];
+ ushort code[ASC_MC_SAVE_CODE_WSIZE];
+} ASC_MC_SAVED;
+
+#define AscGetQDoneInProgress(port) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B)
+#define AscPutQDoneInProgress(port, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B, val)
+#define AscGetVarFreeQHead(port) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W)
+#define AscGetVarDoneQTail(port) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W)
+#define AscPutVarFreeQHead(port, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W, val)
+#define AscPutVarDoneQTail(port, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W, val)
+#define AscGetRiscVarFreeQHead(port) AscReadLramByte((port), ASCV_NEXTRDY_B)
+#define AscGetRiscVarDoneQTail(port) AscReadLramByte((port), ASCV_DONENEXT_B)
+#define AscPutRiscVarFreeQHead(port, val) AscWriteLramByte((port), ASCV_NEXTRDY_B, val)
+#define AscPutRiscVarDoneQTail(port, val) AscWriteLramByte((port), ASCV_DONENEXT_B, val)
+#define AscPutMCodeSDTRDoneAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id), (data));
+#define AscGetMCodeSDTRDoneAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id));
+#define AscPutMCodeInitSDTRAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id), data);
+#define AscGetMCodeInitSDTRAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id));
+#define AscSynIndexToPeriod(index) (uchar)(asc_dvc->sdtr_period_tbl[ (index) ])
+#define AscGetChipSignatureByte(port) (uchar)inp((port)+IOP_SIG_BYTE)
+#define AscGetChipSignatureWord(port) (ushort)inpw((port)+IOP_SIG_WORD)
+#define AscGetChipVerNo(port) (uchar)inp((port)+IOP_VERSION)
+#define AscGetChipCfgLsw(port) (ushort)inpw((port)+IOP_CONFIG_LOW)
+#define AscGetChipCfgMsw(port) (ushort)inpw((port)+IOP_CONFIG_HIGH)
+#define AscSetChipCfgLsw(port, data) outpw((port)+IOP_CONFIG_LOW, data)
+#define AscSetChipCfgMsw(port, data) outpw((port)+IOP_CONFIG_HIGH, data)
+#define AscGetChipEEPCmd(port) (uchar)inp((port)+IOP_EEP_CMD)
+#define AscSetChipEEPCmd(port, data) outp((port)+IOP_EEP_CMD, data)
+#define AscGetChipEEPData(port) (ushort)inpw((port)+IOP_EEP_DATA)
+#define AscSetChipEEPData(port, data) outpw((port)+IOP_EEP_DATA, data)
+#define AscGetChipLramAddr(port) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR))
+#define AscSetChipLramAddr(port, addr) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr)
+#define AscGetChipLramData(port) (ushort)inpw((port)+IOP_RAM_DATA)
+#define AscSetChipLramData(port, data) outpw((port)+IOP_RAM_DATA, data)
+#define AscGetChipIFC(port) (uchar)inp((port)+IOP_REG_IFC)
+#define AscSetChipIFC(port, data) outp((port)+IOP_REG_IFC, data)
+#define AscGetChipStatus(port) (ASC_CS_TYPE)inpw((port)+IOP_STATUS)
+#define AscSetChipStatus(port, cs_val) outpw((port)+IOP_STATUS, cs_val)
+#define AscGetChipControl(port) (uchar)inp((port)+IOP_CTRL)
+#define AscSetChipControl(port, cc_val) outp((port)+IOP_CTRL, cc_val)
+#define AscGetChipSyn(port) (uchar)inp((port)+IOP_SYN_OFFSET)
+#define AscSetChipSyn(port, data) outp((port)+IOP_SYN_OFFSET, data)
+#define AscSetPCAddr(port, data) outpw((port)+IOP_REG_PC, data)
+#define AscGetPCAddr(port) (ushort)inpw((port)+IOP_REG_PC)
+#define AscIsIntPending(port) (AscGetChipStatus(port) & (CSW_INT_PENDING | CSW_SCSI_RESET_LATCH))
+#define AscGetChipScsiID(port) ((AscGetChipCfgLsw(port) >> 8) & ASC_MAX_TID)
+#define AscGetExtraControl(port) (uchar)inp((port)+IOP_EXTRA_CONTROL)
+#define AscSetExtraControl(port, data) outp((port)+IOP_EXTRA_CONTROL, data)
+#define AscReadChipAX(port) (ushort)inpw((port)+IOP_REG_AX)
+#define AscWriteChipAX(port, data) outpw((port)+IOP_REG_AX, data)
+#define AscReadChipIX(port) (uchar)inp((port)+IOP_REG_IX)
+#define AscWriteChipIX(port, data) outp((port)+IOP_REG_IX, data)
+#define AscReadChipIH(port) (ushort)inpw((port)+IOP_REG_IH)
+#define AscWriteChipIH(port, data) outpw((port)+IOP_REG_IH, data)
+#define AscReadChipQP(port) (uchar)inp((port)+IOP_REG_QP)
+#define AscWriteChipQP(port, data) outp((port)+IOP_REG_QP, data)
+#define AscReadChipFIFO_L(port) (ushort)inpw((port)+IOP_REG_FIFO_L)
+#define AscWriteChipFIFO_L(port, data) outpw((port)+IOP_REG_FIFO_L, data)
+#define AscReadChipFIFO_H(port) (ushort)inpw((port)+IOP_REG_FIFO_H)
+#define AscWriteChipFIFO_H(port, data) outpw((port)+IOP_REG_FIFO_H, data)
+#define AscReadChipDmaSpeed(port) (uchar)inp((port)+IOP_DMA_SPEED)
+#define AscWriteChipDmaSpeed(port, data) outp((port)+IOP_DMA_SPEED, data)
+#define AscReadChipDA0(port) (ushort)inpw((port)+IOP_REG_DA0)
+#define AscWriteChipDA0(port) outpw((port)+IOP_REG_DA0, data)
+#define AscReadChipDA1(port) (ushort)inpw((port)+IOP_REG_DA1)
+#define AscWriteChipDA1(port) outpw((port)+IOP_REG_DA1, data)
+#define AscReadChipDC0(port) (ushort)inpw((port)+IOP_REG_DC0)
+#define AscWriteChipDC0(port) outpw((port)+IOP_REG_DC0, data)
+#define AscReadChipDC1(port) (ushort)inpw((port)+IOP_REG_DC1)
+#define AscWriteChipDC1(port) outpw((port)+IOP_REG_DC1, data)
+#define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID)
+#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data)
+
+STATIC int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg);
+STATIC int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg);
+STATIC void AscWaitEEPRead(void);
+STATIC void AscWaitEEPWrite(void);
+STATIC ushort AscReadEEPWord(PortAddr, uchar);
+STATIC ushort AscWriteEEPWord(PortAddr, uchar, ushort);
+STATIC ushort AscGetEEPConfig(PortAddr, ASCEEP_CONFIG *, ushort);
+STATIC int AscSetEEPConfigOnce(PortAddr, ASCEEP_CONFIG *, ushort);
+STATIC int AscSetEEPConfig(PortAddr, ASCEEP_CONFIG *, ushort);
+STATIC int AscStartChip(PortAddr);
+STATIC int AscStopChip(PortAddr);
+STATIC void AscSetChipIH(PortAddr, ushort);
+STATIC int AscIsChipHalted(PortAddr);
+STATIC void AscAckInterrupt(PortAddr);
+STATIC void AscDisableInterrupt(PortAddr);
+STATIC void AscEnableInterrupt(PortAddr);
+STATIC void AscSetBank(PortAddr, uchar);
+STATIC int AscResetChipAndScsiBus(ASC_DVC_VAR *);
+#ifdef CONFIG_ISA
+STATIC ushort AscGetIsaDmaChannel(PortAddr);
+STATIC ushort AscSetIsaDmaChannel(PortAddr, ushort);
+STATIC uchar AscSetIsaDmaSpeed(PortAddr, uchar);
+STATIC uchar AscGetIsaDmaSpeed(PortAddr);
+#endif /* CONFIG_ISA */
+STATIC uchar AscReadLramByte(PortAddr, ushort);
+STATIC ushort AscReadLramWord(PortAddr, ushort);
+#if CC_VERY_LONG_SG_LIST
+STATIC ASC_DCNT AscReadLramDWord(PortAddr, ushort);
+#endif /* CC_VERY_LONG_SG_LIST */
+STATIC void AscWriteLramWord(PortAddr, ushort, ushort);
+STATIC void AscWriteLramByte(PortAddr, ushort, uchar);
+STATIC ASC_DCNT AscMemSumLramWord(PortAddr, ushort, int);
+STATIC void AscMemWordSetLram(PortAddr, ushort, ushort, int);
+STATIC void AscMemWordCopyPtrToLram(PortAddr, ushort, uchar *, int);
+STATIC void AscMemDWordCopyPtrToLram(PortAddr, ushort, uchar *, int);
+STATIC void AscMemWordCopyPtrFromLram(PortAddr, ushort, uchar *, int);
+STATIC ushort AscInitAscDvcVar(ASC_DVC_VAR *);
+STATIC ushort AscInitFromEEP(ASC_DVC_VAR *);
+STATIC ushort AscInitFromAscDvcVar(ASC_DVC_VAR *);
+STATIC ushort AscInitMicroCodeVar(ASC_DVC_VAR *);
+STATIC int AscTestExternalLram(ASC_DVC_VAR *);
+STATIC uchar AscMsgOutSDTR(ASC_DVC_VAR *, uchar, uchar);
+STATIC uchar AscCalSDTRData(ASC_DVC_VAR *, uchar, uchar);
+STATIC void AscSetChipSDTR(PortAddr, uchar, uchar);
+STATIC uchar AscGetSynPeriodIndex(ASC_DVC_VAR *, uchar);
+STATIC uchar AscAllocFreeQueue(PortAddr, uchar);
+STATIC uchar AscAllocMultipleFreeQueue(PortAddr, uchar, uchar);
+STATIC int AscHostReqRiscHalt(PortAddr);
+STATIC int AscStopQueueExe(PortAddr);
+STATIC int AscSendScsiQueue(ASC_DVC_VAR *,
+ ASC_SCSI_Q * scsiq,
+ uchar n_q_required);
+STATIC int AscPutReadyQueue(ASC_DVC_VAR *,
+ ASC_SCSI_Q *, uchar);
+STATIC int AscPutReadySgListQueue(ASC_DVC_VAR *,
+ ASC_SCSI_Q *, uchar);
+STATIC int AscSetChipSynRegAtID(PortAddr, uchar, uchar);
+STATIC int AscSetRunChipSynRegAtID(PortAddr, uchar, uchar);
+STATIC ushort AscInitLram(ASC_DVC_VAR *);
+STATIC ushort AscInitQLinkVar(ASC_DVC_VAR *);
+STATIC int AscSetLibErrorCode(ASC_DVC_VAR *, ushort);
+STATIC int AscIsrChipHalted(ASC_DVC_VAR *);
+STATIC uchar _AscCopyLramScsiDoneQ(PortAddr, ushort,
+ ASC_QDONE_INFO *, ASC_DCNT);
+STATIC int AscIsrQDone(ASC_DVC_VAR *);
+STATIC int AscCompareString(uchar *, uchar *, int);
+#ifdef CONFIG_ISA
+STATIC ushort AscGetEisaChipCfg(PortAddr);
+STATIC ASC_DCNT AscGetEisaProductID(PortAddr);
+STATIC PortAddr AscSearchIOPortAddrEISA(PortAddr);
+STATIC PortAddr AscSearchIOPortAddr11(PortAddr);
+STATIC PortAddr AscSearchIOPortAddr(PortAddr, ushort);
+STATIC void AscSetISAPNPWaitForKey(void);
+#endif /* CONFIG_ISA */
+STATIC uchar AscGetChipScsiCtrl(PortAddr);
+STATIC uchar AscSetChipScsiID(PortAddr, uchar);
+STATIC uchar AscGetChipVersion(PortAddr, ushort);
+STATIC ushort AscGetChipBusType(PortAddr);
+STATIC ASC_DCNT AscLoadMicroCode(PortAddr, ushort, uchar *, ushort);
+STATIC int AscFindSignature(PortAddr);
+STATIC void AscToggleIRQAct(PortAddr);
+STATIC uchar AscGetChipIRQ(PortAddr, ushort);
+STATIC uchar AscSetChipIRQ(PortAddr, uchar, ushort);
+STATIC ushort AscGetChipBiosAddress(PortAddr, ushort);
+STATIC inline ulong DvcEnterCritical(void);
+STATIC inline void DvcLeaveCritical(ulong);
+#ifdef CONFIG_PCI
+STATIC uchar DvcReadPCIConfigByte(ASC_DVC_VAR *, ushort);
+STATIC void DvcWritePCIConfigByte(ASC_DVC_VAR *,
+ ushort, uchar);
+#endif /* CONFIG_PCI */
+STATIC ushort AscGetChipBiosAddress(PortAddr, ushort);
+STATIC void DvcSleepMilliSecond(ASC_DCNT);
+STATIC void DvcDelayNanoSecond(ASC_DVC_VAR *, ASC_DCNT);
+STATIC void DvcPutScsiQ(PortAddr, ushort, uchar *, int);
+STATIC void DvcGetQinfo(PortAddr, ushort, uchar *, int);
+STATIC ushort AscInitGetConfig(ASC_DVC_VAR *);
+STATIC ushort AscInitSetConfig(ASC_DVC_VAR *);
+STATIC ushort AscInitAsc1000Driver(ASC_DVC_VAR *);
+STATIC void AscAsyncFix(ASC_DVC_VAR *, uchar,
+ ASC_SCSI_INQUIRY *);
+STATIC int AscTagQueuingSafe(ASC_SCSI_INQUIRY *);
+STATIC void AscInquiryHandling(ASC_DVC_VAR *,
+ uchar, ASC_SCSI_INQUIRY *);
+STATIC int AscExeScsiQueue(ASC_DVC_VAR *, ASC_SCSI_Q *);
+STATIC int AscISR(ASC_DVC_VAR *);
+STATIC uint AscGetNumOfFreeQueue(ASC_DVC_VAR *, uchar,
+ uchar);
+STATIC int AscSgListToQueue(int);
+#ifdef CONFIG_ISA
+STATIC void AscEnableIsaDma(uchar);
+#endif /* CONFIG_ISA */
+STATIC ASC_DCNT AscGetMaxDmaCount(ushort);
+
+
+/*
+ * --- Adv Library Constants and Macros
+ */
+
+#define ADV_LIB_VERSION_MAJOR 5
+#define ADV_LIB_VERSION_MINOR 14
+
+/*
+ * Define Adv Library required special types.
+ */
+
+/*
+ * Portable Data Types
+ *
+ * Any instance where a 32-bit long or pointer type is assumed
+ * for precision or HW defined structures, the following define
+ * types must be used. In Linux the char, short, and int types
+ * are all consistent at 8, 16, and 32 bits respectively. Pointers
+ * and long types are 64 bits on Alpha and UltraSPARC.
+ */
+#define ADV_PADDR __u32 /* Physical address data type. */
+#define ADV_VADDR __u32 /* Virtual address data type. */
+#define ADV_DCNT __u32 /* Unsigned Data count type. */
+#define ADV_SDCNT __s32 /* Signed Data count type. */
+
+/*
+ * These macros are used to convert a virtual address to a
+ * 32-bit value. This currently can be used on Linux Alpha
+ * which uses 64-bit virtual address but a 32-bit bus address.
+ * This is likely to break in the future, but doing this now
+ * will give us time to change the HW and FW to handle 64-bit
+ * addresses.
+ */
+#define ADV_VADDR_TO_U32 virt_to_bus
+#define ADV_U32_TO_VADDR bus_to_virt
+
+#define AdvPortAddr ulong /* Virtual memory address size */
+
+/*
+ * Define Adv Library required memory access macros.
+ */
+#define ADV_MEM_READB(addr) readb(addr)
+#define ADV_MEM_READW(addr) readw(addr)
+#define ADV_MEM_WRITEB(addr, byte) writeb(byte, addr)
+#define ADV_MEM_WRITEW(addr, word) writew(word, addr)
+#define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr)
+
+#define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 15)
+
+/*
+ * For wide boards a CDB length maximum of 16 bytes
+ * is supported.
+ */
+#define ADV_MAX_CDB_LEN 16
+
+/*
+ * Define total number of simultaneous maximum element scatter-gather
+ * request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the
+ * maximum number of outstanding commands per wide host adapter. Each
+ * command uses one or more ADV_SG_BLOCK each with 15 scatter-gather
+ * elements. Allow each command to have at least one ADV_SG_BLOCK structure.
+ * This allows about 15 commands to have the maximum 17 ADV_SG_BLOCK
+ * structures or 255 scatter-gather elements.
+ *
+ */
+#define ADV_TOT_SG_BLOCK ASC_DEF_MAX_HOST_QNG
+
+/*
+ * Define Adv Library required maximum number of scatter-gather
+ * elements per request.
+ */
+#define ADV_MAX_SG_LIST 255
+
+/* Number of SG blocks needed. */
+#define ADV_NUM_SG_BLOCK \
+ ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)
+
+/* Total contiguous memory needed for SG blocks. */
+#define ADV_SG_TOTAL_MEM_SIZE \
+ (sizeof(ADV_SG_BLOCK) * ADV_NUM_SG_BLOCK)
+
+#define ADV_PAGE_SIZE PAGE_SIZE
+
+#define ADV_NUM_PAGE_CROSSING \
+ ((ADV_SG_TOTAL_MEM_SIZE + (ADV_PAGE_SIZE - 1))/ADV_PAGE_SIZE)
+
+/* a_condor.h */
+#define ADV_PCI_VENDOR_ID 0x10CD
+#define ADV_PCI_DEVICE_ID_REV_A 0x2300
+#define ADV_PCI_DEVID_38C0800_REV1 0x2500
+#define ADV_PCI_DEVID_38C1600_REV1 0x2700
+
+#define ADV_EEP_DVC_CFG_BEGIN (0x00)
+#define ADV_EEP_DVC_CFG_END (0x15)
+#define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */
+#define ADV_EEP_MAX_WORD_ADDR (0x1E)
+
+#define ADV_EEP_DELAY_MS 100
+
+#define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */
+#define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */
+/*
+ * For the ASC3550 Bit 13 is Termination Polarity control bit.
+ * For later ICs Bit 13 controls whether the CIS (Card Information
+ * Service Section) is loaded from EEPROM.
+ */
+#define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */
+#define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */
+/*
+ * ASC38C1600 Bit 11
+ *
+ * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify
+ * INT A in the PCI Configuration Space Int Pin field. If it is 1, then
+ * Function 0 will specify INT B.
+ *
+ * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify
+ * INT B in the PCI Configuration Space Int Pin field. If it is 1, then
+ * Function 1 will specify INT A.
+ */
+#define ADV_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */
+
+typedef struct adveep_3550_config
+{
+ /* Word Offset, Description */
+
+ ushort cfg_lsw; /* 00 power up initialization */
+ /* bit 13 set - Term Polarity Control */
+ /* bit 14 set - BIOS Enable */
+ /* bit 15 set - Big Endian Mode */
+ ushort cfg_msw; /* 01 unused */
+ ushort disc_enable; /* 02 disconnect enable */
+ ushort wdtr_able; /* 03 Wide DTR able */
+ ushort sdtr_able; /* 04 Synchronous DTR able */
+ ushort start_motor; /* 05 send start up motor */
+ ushort tagqng_able; /* 06 tag queuing able */
+ ushort bios_scan; /* 07 BIOS device control */
+ ushort scam_tolerant; /* 08 no scam */
+
+ uchar adapter_scsi_id; /* 09 Host Adapter ID */
+ uchar bios_boot_delay; /* power up wait */
+
+ uchar scsi_reset_delay; /* 10 reset delay */
+ uchar bios_id_lun; /* first boot device scsi id & lun */
+ /* high nibble is lun */
+ /* low nibble is scsi id */
+
+ uchar termination; /* 11 0 - automatic */
+ /* 1 - low off / high off */
+ /* 2 - low off / high on */
+ /* 3 - low on / high on */
+ /* There is no low on / high off */
+
+ uchar reserved1; /* reserved byte (not used) */
+
+ ushort bios_ctrl; /* 12 BIOS control bits */
+ /* bit 0 BIOS don't act as initiator. */
+ /* bit 1 BIOS > 1 GB support */
+ /* bit 2 BIOS > 2 Disk Support */
+ /* bit 3 BIOS don't support removables */
+ /* bit 4 BIOS support bootable CD */
+ /* bit 5 BIOS scan enabled */
+ /* bit 6 BIOS support multiple LUNs */
+ /* bit 7 BIOS display of message */
+ /* bit 8 SCAM disabled */
+ /* bit 9 Reset SCSI bus during init. */
+ /* bit 10 */
+ /* bit 11 No verbose initialization. */
+ /* bit 12 SCSI parity enabled */
+ /* bit 13 */
+ /* bit 14 */
+ /* bit 15 */
+ ushort ultra_able; /* 13 ULTRA speed able */
+ ushort reserved2; /* 14 reserved */
+ uchar max_host_qng; /* 15 maximum host queuing */
+ uchar max_dvc_qng; /* maximum per device queuing */
+ ushort dvc_cntl; /* 16 control bit for driver */
+ ushort bug_fix; /* 17 control bit for bug fix */
+ ushort serial_number_word1; /* 18 Board serial number word 1 */
+ ushort serial_number_word2; /* 19 Board serial number word 2 */
+ ushort serial_number_word3; /* 20 Board serial number word 3 */
+ ushort check_sum; /* 21 EEP check sum */
+ uchar oem_name[16]; /* 22 OEM name */
+ ushort dvc_err_code; /* 30 last device driver error code */
+ ushort adv_err_code; /* 31 last uc and Adv Lib error code */
+ ushort adv_err_addr; /* 32 last uc error address */
+ ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
+ ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
+ ushort saved_adv_err_addr; /* 35 saved last uc error address */
+ ushort num_of_err; /* 36 number of error */
+} ADVEEP_3550_CONFIG;
+
+typedef struct adveep_38C0800_config
+{
+ /* Word Offset, Description */
+
+ ushort cfg_lsw; /* 00 power up initialization */
+ /* bit 13 set - Load CIS */
+ /* bit 14 set - BIOS Enable */
+ /* bit 15 set - Big Endian Mode */
+ ushort cfg_msw; /* 01 unused */
+ ushort disc_enable; /* 02 disconnect enable */
+ ushort wdtr_able; /* 03 Wide DTR able */
+ ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */
+ ushort start_motor; /* 05 send start up motor */
+ ushort tagqng_able; /* 06 tag queuing able */
+ ushort bios_scan; /* 07 BIOS device control */
+ ushort scam_tolerant; /* 08 no scam */
+
+ uchar adapter_scsi_id; /* 09 Host Adapter ID */
+ uchar bios_boot_delay; /* power up wait */
+
+ uchar scsi_reset_delay; /* 10 reset delay */
+ uchar bios_id_lun; /* first boot device scsi id & lun */
+ /* high nibble is lun */
+ /* low nibble is scsi id */
+
+ uchar termination_se; /* 11 0 - automatic */
+ /* 1 - low off / high off */
+ /* 2 - low off / high on */
+ /* 3 - low on / high on */
+ /* There is no low on / high off */
+
+ uchar termination_lvd; /* 11 0 - automatic */
+ /* 1 - low off / high off */
+ /* 2 - low off / high on */
+ /* 3 - low on / high on */
+ /* There is no low on / high off */
+
+ ushort bios_ctrl; /* 12 BIOS control bits */
+ /* bit 0 BIOS don't act as initiator. */
+ /* bit 1 BIOS > 1 GB support */
+ /* bit 2 BIOS > 2 Disk Support */
+ /* bit 3 BIOS don't support removables */
+ /* bit 4 BIOS support bootable CD */
+ /* bit 5 BIOS scan enabled */
+ /* bit 6 BIOS support multiple LUNs */
+ /* bit 7 BIOS display of message */
+ /* bit 8 SCAM disabled */
+ /* bit 9 Reset SCSI bus during init. */
+ /* bit 10 */
+ /* bit 11 No verbose initialization. */
+ /* bit 12 SCSI parity enabled */
+ /* bit 13 */
+ /* bit 14 */
+ /* bit 15 */
+ ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */
+ ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */
+ uchar max_host_qng; /* 15 maximum host queueing */
+ uchar max_dvc_qng; /* maximum per device queuing */
+ ushort dvc_cntl; /* 16 control bit for driver */
+ ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */
+ ushort serial_number_word1; /* 18 Board serial number word 1 */
+ ushort serial_number_word2; /* 19 Board serial number word 2 */
+ ushort serial_number_word3; /* 20 Board serial number word 3 */
+ ushort check_sum; /* 21 EEP check sum */
+ uchar oem_name[16]; /* 22 OEM name */
+ ushort dvc_err_code; /* 30 last device driver error code */
+ ushort adv_err_code; /* 31 last uc and Adv Lib error code */
+ ushort adv_err_addr; /* 32 last uc error address */
+ ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
+ ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
+ ushort saved_adv_err_addr; /* 35 saved last uc error address */
+ ushort reserved36; /* 36 reserved */
+ ushort reserved37; /* 37 reserved */
+ ushort reserved38; /* 38 reserved */
+ ushort reserved39; /* 39 reserved */
+ ushort reserved40; /* 40 reserved */
+ ushort reserved41; /* 41 reserved */
+ ushort reserved42; /* 42 reserved */
+ ushort reserved43; /* 43 reserved */
+ ushort reserved44; /* 44 reserved */
+ ushort reserved45; /* 45 reserved */
+ ushort reserved46; /* 46 reserved */
+ ushort reserved47; /* 47 reserved */
+ ushort reserved48; /* 48 reserved */
+ ushort reserved49; /* 49 reserved */
+ ushort reserved50; /* 50 reserved */
+ ushort reserved51; /* 51 reserved */
+ ushort reserved52; /* 52 reserved */
+ ushort reserved53; /* 53 reserved */
+ ushort reserved54; /* 54 reserved */
+ ushort reserved55; /* 55 reserved */
+ ushort cisptr_lsw; /* 56 CIS PTR LSW */
+ ushort cisprt_msw; /* 57 CIS PTR MSW */
+ ushort subsysvid; /* 58 SubSystem Vendor ID */
+ ushort subsysid; /* 59 SubSystem ID */
+ ushort reserved60; /* 60 reserved */
+ ushort reserved61; /* 61 reserved */
+ ushort reserved62; /* 62 reserved */
+ ushort reserved63; /* 63 reserved */
+} ADVEEP_38C0800_CONFIG;
+
+typedef struct adveep_38C1600_config
+{
+ /* Word Offset, Description */
+
+ ushort cfg_lsw; /* 00 power up initialization */
+ /* bit 11 set - Func. 0 INTB, Func. 1 INTA */
+ /* clear - Func. 0 INTA, Func. 1 INTB */
+ /* bit 13 set - Load CIS */
+ /* bit 14 set - BIOS Enable */
+ /* bit 15 set - Big Endian Mode */
+ ushort cfg_msw; /* 01 unused */
+ ushort disc_enable; /* 02 disconnect enable */
+ ushort wdtr_able; /* 03 Wide DTR able */
+ ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */
+ ushort start_motor; /* 05 send start up motor */
+ ushort tagqng_able; /* 06 tag queuing able */
+ ushort bios_scan; /* 07 BIOS device control */
+ ushort scam_tolerant; /* 08 no scam */
+
+ uchar adapter_scsi_id; /* 09 Host Adapter ID */
+ uchar bios_boot_delay; /* power up wait */
+
+ uchar scsi_reset_delay; /* 10 reset delay */
+ uchar bios_id_lun; /* first boot device scsi id & lun */
+ /* high nibble is lun */
+ /* low nibble is scsi id */
+
+ uchar termination_se; /* 11 0 - automatic */
+ /* 1 - low off / high off */
+ /* 2 - low off / high on */
+ /* 3 - low on / high on */
+ /* There is no low on / high off */
+
+ uchar termination_lvd; /* 11 0 - automatic */
+ /* 1 - low off / high off */
+ /* 2 - low off / high on */
+ /* 3 - low on / high on */
+ /* There is no low on / high off */
+
+ ushort bios_ctrl; /* 12 BIOS control bits */
+ /* bit 0 BIOS don't act as initiator. */
+ /* bit 1 BIOS > 1 GB support */
+ /* bit 2 BIOS > 2 Disk Support */
+ /* bit 3 BIOS don't support removables */
+ /* bit 4 BIOS support bootable CD */
+ /* bit 5 BIOS scan enabled */
+ /* bit 6 BIOS support multiple LUNs */
+ /* bit 7 BIOS display of message */
+ /* bit 8 SCAM disabled */
+ /* bit 9 Reset SCSI bus during init. */
+ /* bit 10 Basic Integrity Checking disabled */
+ /* bit 11 No verbose initialization. */
+ /* bit 12 SCSI parity enabled */
+ /* bit 13 AIPP (Asyn. Info. Ph. Prot.) dis. */
+ /* bit 14 */
+ /* bit 15 */
+ ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */
+ ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */
+ uchar max_host_qng; /* 15 maximum host queueing */
+ uchar max_dvc_qng; /* maximum per device queuing */
+ ushort dvc_cntl; /* 16 control bit for driver */
+ ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */
+ ushort serial_number_word1; /* 18 Board serial number word 1 */
+ ushort serial_number_word2; /* 19 Board serial number word 2 */
+ ushort serial_number_word3; /* 20 Board serial number word 3 */
+ ushort check_sum; /* 21 EEP check sum */
+ uchar oem_name[16]; /* 22 OEM name */
+ ushort dvc_err_code; /* 30 last device driver error code */
+ ushort adv_err_code; /* 31 last uc and Adv Lib error code */
+ ushort adv_err_addr; /* 32 last uc error address */
+ ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */
+ ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */
+ ushort saved_adv_err_addr; /* 35 saved last uc error address */
+ ushort reserved36; /* 36 reserved */
+ ushort reserved37; /* 37 reserved */
+ ushort reserved38; /* 38 reserved */
+ ushort reserved39; /* 39 reserved */
+ ushort reserved40; /* 40 reserved */
+ ushort reserved41; /* 41 reserved */
+ ushort reserved42; /* 42 reserved */
+ ushort reserved43; /* 43 reserved */
+ ushort reserved44; /* 44 reserved */
+ ushort reserved45; /* 45 reserved */
+ ushort reserved46; /* 46 reserved */
+ ushort reserved47; /* 47 reserved */
+ ushort reserved48; /* 48 reserved */
+ ushort reserved49; /* 49 reserved */
+ ushort reserved50; /* 50 reserved */
+ ushort reserved51; /* 51 reserved */
+ ushort reserved52; /* 52 reserved */
+ ushort reserved53; /* 53 reserved */
+ ushort reserved54; /* 54 reserved */
+ ushort reserved55; /* 55 reserved */
+ ushort cisptr_lsw; /* 56 CIS PTR LSW */
+ ushort cisprt_msw; /* 57 CIS PTR MSW */
+ ushort subsysvid; /* 58 SubSystem Vendor ID */
+ ushort subsysid; /* 59 SubSystem ID */
+ ushort reserved60; /* 60 reserved */
+ ushort reserved61; /* 61 reserved */
+ ushort reserved62; /* 62 reserved */
+ ushort reserved63; /* 63 reserved */
+} ADVEEP_38C1600_CONFIG;
+
+/*
+ * EEPROM Commands
+ */
+#define ASC_EEP_CMD_DONE 0x0200
+#define ASC_EEP_CMD_DONE_ERR 0x0001
+
+/* cfg_word */
+#define EEP_CFG_WORD_BIG_ENDIAN 0x8000
+
+/* bios_ctrl */
+#define BIOS_CTRL_BIOS 0x0001
+#define BIOS_CTRL_EXTENDED_XLAT 0x0002
+#define BIOS_CTRL_GT_2_DISK 0x0004
+#define BIOS_CTRL_BIOS_REMOVABLE 0x0008
+#define BIOS_CTRL_BOOTABLE_CD 0x0010
+#define BIOS_CTRL_MULTIPLE_LUN 0x0040
+#define BIOS_CTRL_DISPLAY_MSG 0x0080
+#define BIOS_CTRL_NO_SCAM 0x0100
+#define BIOS_CTRL_RESET_SCSI_BUS 0x0200
+#define BIOS_CTRL_INIT_VERBOSE 0x0800
+#define BIOS_CTRL_SCSI_PARITY 0x1000
+#define BIOS_CTRL_AIPP_DIS 0x2000
+
+#define ADV_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */
+#define ADV_3550_IOLEN 0x40 /* I/O Port Range in bytes */
+
+#define ADV_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */
+#define ADV_38C0800_IOLEN 0x100 /* I/O Port Range in bytes */
+
+/*
+ * XXX - Since ASC38C1600 Rev.3 has a local RAM failure issue, there is
+ * a special 16K Adv Library and Microcode version. After the issue is
+ * resolved, should restore 32K support.
+ *
+ * #define ADV_38C1600_MEMSIZE 0x8000L * 32 KB Internal Memory *
+ */
+#define ADV_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */
+#define ADV_38C1600_IOLEN 0x100 /* I/O Port Range 256 bytes */
+#define ADV_38C1600_MEMLEN 0x1000 /* Memory Range 4KB bytes */
+
+/*
+ * Byte I/O register address from base of 'iop_base'.
+ */
+#define IOPB_INTR_STATUS_REG 0x00
+#define IOPB_CHIP_ID_1 0x01
+#define IOPB_INTR_ENABLES 0x02
+#define IOPB_CHIP_TYPE_REV 0x03
+#define IOPB_RES_ADDR_4 0x04
+#define IOPB_RES_ADDR_5 0x05
+#define IOPB_RAM_DATA 0x06
+#define IOPB_RES_ADDR_7 0x07
+#define IOPB_FLAG_REG 0x08
+#define IOPB_RES_ADDR_9 0x09
+#define IOPB_RISC_CSR 0x0A
+#define IOPB_RES_ADDR_B 0x0B
+#define IOPB_RES_ADDR_C 0x0C
+#define IOPB_RES_ADDR_D 0x0D
+#define IOPB_SOFT_OVER_WR 0x0E
+#define IOPB_RES_ADDR_F 0x0F
+#define IOPB_MEM_CFG 0x10
+#define IOPB_RES_ADDR_11 0x11
+#define IOPB_GPIO_DATA 0x12
+#define IOPB_RES_ADDR_13 0x13
+#define IOPB_FLASH_PAGE 0x14
+#define IOPB_RES_ADDR_15 0x15
+#define IOPB_GPIO_CNTL 0x16
+#define IOPB_RES_ADDR_17 0x17
+#define IOPB_FLASH_DATA 0x18
+#define IOPB_RES_ADDR_19 0x19
+#define IOPB_RES_ADDR_1A 0x1A
+#define IOPB_RES_ADDR_1B 0x1B
+#define IOPB_RES_ADDR_1C 0x1C
+#define IOPB_RES_ADDR_1D 0x1D
+#define IOPB_RES_ADDR_1E 0x1E
+#define IOPB_RES_ADDR_1F 0x1F
+#define IOPB_DMA_CFG0 0x20
+#define IOPB_DMA_CFG1 0x21
+#define IOPB_TICKLE 0x22
+#define IOPB_DMA_REG_WR 0x23
+#define IOPB_SDMA_STATUS 0x24
+#define IOPB_SCSI_BYTE_CNT 0x25
+#define IOPB_HOST_BYTE_CNT 0x26
+#define IOPB_BYTE_LEFT_TO_XFER 0x27
+#define IOPB_BYTE_TO_XFER_0 0x28
+#define IOPB_BYTE_TO_XFER_1 0x29
+#define IOPB_BYTE_TO_XFER_2 0x2A
+#define IOPB_BYTE_TO_XFER_3 0x2B
+#define IOPB_ACC_GRP 0x2C
+#define IOPB_RES_ADDR_2D 0x2D
+#define IOPB_DEV_ID 0x2E
+#define IOPB_RES_ADDR_2F 0x2F
+#define IOPB_SCSI_DATA 0x30
+#define IOPB_RES_ADDR_31 0x31
+#define IOPB_RES_ADDR_32 0x32
+#define IOPB_SCSI_DATA_HSHK 0x33
+#define IOPB_SCSI_CTRL 0x34
+#define IOPB_RES_ADDR_35 0x35
+#define IOPB_RES_ADDR_36 0x36
+#define IOPB_RES_ADDR_37 0x37
+#define IOPB_RAM_BIST 0x38
+#define IOPB_PLL_TEST 0x39
+#define IOPB_PCI_INT_CFG 0x3A
+#define IOPB_RES_ADDR_3B 0x3B
+#define IOPB_RFIFO_CNT 0x3C
+#define IOPB_RES_ADDR_3D 0x3D
+#define IOPB_RES_ADDR_3E 0x3E
+#define IOPB_RES_ADDR_3F 0x3F
+
+/*
+ * Word I/O register address from base of 'iop_base'.
+ */
+#define IOPW_CHIP_ID_0 0x00 /* CID0 */
+#define IOPW_CTRL_REG 0x02 /* CC */
+#define IOPW_RAM_ADDR 0x04 /* LA */
+#define IOPW_RAM_DATA 0x06 /* LD */
+#define IOPW_RES_ADDR_08 0x08
+#define IOPW_RISC_CSR 0x0A /* CSR */
+#define IOPW_SCSI_CFG0 0x0C /* CFG0 */
+#define IOPW_SCSI_CFG1 0x0E /* CFG1 */
+#define IOPW_RES_ADDR_10 0x10
+#define IOPW_SEL_MASK 0x12 /* SM */
+#define IOPW_RES_ADDR_14 0x14
+#define IOPW_FLASH_ADDR 0x16 /* FA */
+#define IOPW_RES_ADDR_18 0x18
+#define IOPW_EE_CMD 0x1A /* EC */
+#define IOPW_EE_DATA 0x1C /* ED */
+#define IOPW_SFIFO_CNT 0x1E /* SFC */
+#define IOPW_RES_ADDR_20 0x20
+#define IOPW_Q_BASE 0x22 /* QB */
+#define IOPW_QP 0x24 /* QP */
+#define IOPW_IX 0x26 /* IX */
+#define IOPW_SP 0x28 /* SP */
+#define IOPW_PC 0x2A /* PC */
+#define IOPW_RES_ADDR_2C 0x2C
+#define IOPW_RES_ADDR_2E 0x2E
+#define IOPW_SCSI_DATA 0x30 /* SD */
+#define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */
+#define IOPW_SCSI_CTRL 0x34 /* SC */
+#define IOPW_HSHK_CFG 0x36 /* HCFG */
+#define IOPW_SXFR_STATUS 0x36 /* SXS */
+#define IOPW_SXFR_CNTL 0x38 /* SXL */
+#define IOPW_SXFR_CNTH 0x3A /* SXH */
+#define IOPW_RES_ADDR_3C 0x3C
+#define IOPW_RFIFO_DATA 0x3E /* RFD */
+
+/*
+ * Doubleword I/O register address from base of 'iop_base'.
+ */
+#define IOPDW_RES_ADDR_0 0x00
+#define IOPDW_RAM_DATA 0x04
+#define IOPDW_RES_ADDR_8 0x08
+#define IOPDW_RES_ADDR_C 0x0C
+#define IOPDW_RES_ADDR_10 0x10
+#define IOPDW_COMMA 0x14
+#define IOPDW_COMMB 0x18
+#define IOPDW_RES_ADDR_1C 0x1C
+#define IOPDW_SDMA_ADDR0 0x20
+#define IOPDW_SDMA_ADDR1 0x24
+#define IOPDW_SDMA_COUNT 0x28
+#define IOPDW_SDMA_ERROR 0x2C
+#define IOPDW_RDMA_ADDR0 0x30
+#define IOPDW_RDMA_ADDR1 0x34
+#define IOPDW_RDMA_COUNT 0x38
+#define IOPDW_RDMA_ERROR 0x3C
+
+#define ADV_CHIP_ID_BYTE 0x25
+#define ADV_CHIP_ID_WORD 0x04C1
+
+#define ADV_SC_SCSI_BUS_RESET 0x2000
+
+#define ADV_INTR_ENABLE_HOST_INTR 0x01
+#define ADV_INTR_ENABLE_SEL_INTR 0x02
+#define ADV_INTR_ENABLE_DPR_INTR 0x04
+#define ADV_INTR_ENABLE_RTA_INTR 0x08
+#define ADV_INTR_ENABLE_RMA_INTR 0x10
+#define ADV_INTR_ENABLE_RST_INTR 0x20
+#define ADV_INTR_ENABLE_DPE_INTR 0x40
+#define ADV_INTR_ENABLE_GLOBAL_INTR 0x80
+
+#define ADV_INTR_STATUS_INTRA 0x01
+#define ADV_INTR_STATUS_INTRB 0x02
+#define ADV_INTR_STATUS_INTRC 0x04
+
+#define ADV_RISC_CSR_STOP (0x0000)
+#define ADV_RISC_TEST_COND (0x2000)
+#define ADV_RISC_CSR_RUN (0x4000)
+#define ADV_RISC_CSR_SINGLE_STEP (0x8000)
+
+#define ADV_CTRL_REG_HOST_INTR 0x0100
+#define ADV_CTRL_REG_SEL_INTR 0x0200
+#define ADV_CTRL_REG_DPR_INTR 0x0400
+#define ADV_CTRL_REG_RTA_INTR 0x0800
+#define ADV_CTRL_REG_RMA_INTR 0x1000
+#define ADV_CTRL_REG_RES_BIT14 0x2000
+#define ADV_CTRL_REG_DPE_INTR 0x4000
+#define ADV_CTRL_REG_POWER_DONE 0x8000
+#define ADV_CTRL_REG_ANY_INTR 0xFF00
+
+#define ADV_CTRL_REG_CMD_RESET 0x00C6
+#define ADV_CTRL_REG_CMD_WR_IO_REG 0x00C5
+#define ADV_CTRL_REG_CMD_RD_IO_REG 0x00C4
+#define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3
+#define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2
+
+#define ADV_TICKLE_NOP 0x00
+#define ADV_TICKLE_A 0x01
+#define ADV_TICKLE_B 0x02
+#define ADV_TICKLE_C 0x03
+
+#define ADV_SCSI_CTRL_RSTOUT 0x2000
+
+#define AdvIsIntPending(port) \
+ (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR)
+
+/*
+ * SCSI_CFG0 Register bit definitions
+ */
+#define TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */
+#define PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */
+#define EVEN_PARITY 0x1000 /* Select Even Parity */
+#define WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */
+#define QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */
+#define PRIM_MODE 0x0100 /* Primitive SCSI mode */
+#define SCAM_EN 0x0080 /* Enable SCAM selection */
+#define SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */
+#define CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */
+#define OUR_ID_EN 0x0010 /* Enable OUR_ID bits */
+#define OUR_ID 0x000F /* SCSI ID */
+
+/*
+ * SCSI_CFG1 Register bit definitions
+ */
+#define BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */
+#define TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */
+#define SLEW_RATE 0x1000 /* SCSI output buffer slew rate */
+#define FILTER_SEL 0x0C00 /* Filter Period Selection */
+#define FLTR_DISABLE 0x0000 /* Input Filtering Disabled */
+#define FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */
+#define FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */
+#define ACTIVE_DBL 0x0200 /* Disable Active Negation */
+#define DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */
+#define DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */
+#define TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */
+#define TERM_CTL 0x0030 /* External SCSI Termination Bits */
+#define TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */
+#define TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */
+#define CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */
+
+/*
+ * Addendum for ASC-38C0800 Chip
+ *
+ * The ASC-38C1600 Chip uses the same definitions except that the
+ * bus mode override bits [12:10] have been moved to byte register
+ * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in
+ * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV)
+ * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only.
+ * Also each ASC-38C1600 function or channel uses only cable bits [5:4]
+ * and [1:0]. Bits [14], [7:6], [3:2] are unused.
+ */
+#define DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */
+#define HVD_LVD_SE 0x1C00 /* Device Detect Bits */
+#define HVD 0x1000 /* HVD Device Detect */
+#define LVD 0x0800 /* LVD Device Detect */
+#define SE 0x0400 /* SE Device Detect */
+#define TERM_LVD 0x00C0 /* LVD Termination Bits */
+#define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */
+#define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */
+#define TERM_SE 0x0030 /* SE Termination Bits */
+#define TERM_SE_HI 0x0020 /* Enable SE Upper Termination */
+#define TERM_SE_LO 0x0010 /* Enable SE Lower Termination */
+#define C_DET_LVD 0x000C /* LVD Cable Detect Bits */
+#define C_DET3 0x0008 /* Cable Detect for LVD External Wide */
+#define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */
+#define C_DET_SE 0x0003 /* SE Cable Detect Bits */
+#define C_DET1 0x0002 /* Cable Detect for SE Internal Wide */
+#define C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */
+
+
+#define CABLE_ILLEGAL_A 0x7
+ /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */
+
+#define CABLE_ILLEGAL_B 0xB
+ /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */
+
+/*
+ * MEM_CFG Register bit definitions
+ */
+#define BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */
+#define FAST_EE_CLK 0x20 /* Diagnostic Bit */
+#define RAM_SZ 0x1C /* Specify size of RAM to RISC */
+#define RAM_SZ_2KB 0x00 /* 2 KB */
+#define RAM_SZ_4KB 0x04 /* 4 KB */
+#define RAM_SZ_8KB 0x08 /* 8 KB */
+#define RAM_SZ_16KB 0x0C /* 16 KB */
+#define RAM_SZ_32KB 0x10 /* 32 KB */
+#define RAM_SZ_64KB 0x14 /* 64 KB */
+
+/*
+ * DMA_CFG0 Register bit definitions
+ *
+ * This register is only accessible to the host.
+ */
+#define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */
+#define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */
+#define FIFO_THRESH_16B 0x00 /* 16 bytes */
+#define FIFO_THRESH_32B 0x20 /* 32 bytes */
+#define FIFO_THRESH_48B 0x30 /* 48 bytes */
+#define FIFO_THRESH_64B 0x40 /* 64 bytes */
+#define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */
+#define FIFO_THRESH_96B 0x60 /* 96 bytes */
+#define FIFO_THRESH_112B 0x70 /* 112 bytes */
+#define START_CTL 0x0C /* DMA start conditions */
+#define START_CTL_TH 0x00 /* Wait threshold level (default) */
+#define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */
+#define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */
+#define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */
+#define READ_CMD 0x03 /* Memory Read Method */
+#define READ_CMD_MR 0x00 /* Memory Read */
+#define READ_CMD_MRL 0x02 /* Memory Read Long */
+#define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */
+
+/*
+ * ASC-38C0800 RAM BIST Register bit definitions
+ */
+#define RAM_TEST_MODE 0x80
+#define PRE_TEST_MODE 0x40
+#define NORMAL_MODE 0x00
+#define RAM_TEST_DONE 0x10
+#define RAM_TEST_STATUS 0x0F
+#define RAM_TEST_HOST_ERROR 0x08
+#define RAM_TEST_INTRAM_ERROR 0x04
+#define RAM_TEST_RISC_ERROR 0x02
+#define RAM_TEST_SCSI_ERROR 0x01
+#define RAM_TEST_SUCCESS 0x00
+#define PRE_TEST_VALUE 0x05
+#define NORMAL_VALUE 0x00
+
+/*
+ * ASC38C1600 Definitions
+ *
+ * IOPB_PCI_INT_CFG Bit Field Definitions
+ */
+
+#define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */
+
+/*
+ * Bit 1 can be set to change the interrupt for the Function to operate in
+ * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in
+ * Open Drain mode. Both functions of the ASC38C1600 must be set to the same
+ * mode, otherwise the operating mode is undefined.
+ */
+#define TOTEMPOLE 0x02
+
+/*
+ * Bit 0 can be used to change the Int Pin for the Function. The value is
+ * 0 by default for both Functions with Function 0 using INT A and Function
+ * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set,
+ * INT A is used.
+ *
+ * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin
+ * value specified in the PCI Configuration Space.
+ */
+#define INTAB 0x01
+
+/* a_advlib.h */
+
+/*
+ * Adv Library Status Definitions
+ */
+#define ADV_TRUE 1
+#define ADV_FALSE 0
+#define ADV_NOERROR 1
+#define ADV_SUCCESS 1
+#define ADV_BUSY 0
+#define ADV_ERROR (-1)
+
+
+/*
+ * ADV_DVC_VAR 'warn_code' values
+ */
+#define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */
+#define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */
+#define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */
+#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* PCI config space set error */
+#define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */
+
+#define ADV_MAX_TID 15 /* max. target identifier */
+#define ADV_MAX_LUN 7 /* max. logical unit number */
+
+/*
+ * Error code values are set in ADV_DVC_VAR 'err_code'.
+ */
+#define ASC_IERR_WRITE_EEPROM 0x0001 /* write EEPROM error */
+#define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */
+#define ASC_IERR_NO_CARRIER 0x0004 /* No more carrier memory. */
+#define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */
+#define ASC_IERR_CHIP_VERSION 0x0040 /* wrong chip version */
+#define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */
+#define ASC_IERR_HVD_DEVICE 0x0100 /* HVD attached to LVD connector. */
+#define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */
+#define ASC_IERR_ILLEGAL_CONNECTION 0x0400 /* Illegal cable connection */
+#define ASC_IERR_SINGLE_END_DEVICE 0x0800 /* Single-end used w/differential */
+#define ASC_IERR_REVERSED_CABLE 0x1000 /* Narrow flat cable reversed */
+#define ASC_IERR_BIST_PRE_TEST 0x2000 /* BIST pre-test error */
+#define ASC_IERR_BIST_RAM_TEST 0x4000 /* BIST RAM test error */
+#define ASC_IERR_BAD_CHIPTYPE 0x8000 /* Invalid 'chip_type' setting. */
+
+/*
+ * Fixed locations of microcode operating variables.
+ */
+#define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */
+#define ASC_MC_CODE_END_ADDR 0x002A /* microcode end address */
+#define ASC_MC_CODE_CHK_SUM 0x002C /* microcode code checksum */
+#define ASC_MC_VERSION_DATE 0x0038 /* microcode version */
+#define ASC_MC_VERSION_NUM 0x003A /* microcode number */
+#define ASC_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */
+#define ASC_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */
+#define ASC_MC_BIOS_SIGNATURE 0x0058 /* BIOS Signature 0x55AA */
+#define ASC_MC_BIOS_VERSION 0x005A /* BIOS Version (2 bytes) */
+#define ASC_MC_SDTR_SPEED1 0x0090 /* SDTR Speed for TID 0-3 */
+#define ASC_MC_SDTR_SPEED2 0x0092 /* SDTR Speed for TID 4-7 */
+#define ASC_MC_SDTR_SPEED3 0x0094 /* SDTR Speed for TID 8-11 */
+#define ASC_MC_SDTR_SPEED4 0x0096 /* SDTR Speed for TID 12-15 */
+#define ASC_MC_CHIP_TYPE 0x009A
+#define ASC_MC_INTRB_CODE 0x009B
+#define ASC_MC_WDTR_ABLE 0x009C
+#define ASC_MC_SDTR_ABLE 0x009E
+#define ASC_MC_TAGQNG_ABLE 0x00A0
+#define ASC_MC_DISC_ENABLE 0x00A2
+#define ASC_MC_IDLE_CMD_STATUS 0x00A4
+#define ASC_MC_IDLE_CMD 0x00A6
+#define ASC_MC_IDLE_CMD_PARAMETER 0x00A8
+#define ASC_MC_DEFAULT_SCSI_CFG0 0x00AC
+#define ASC_MC_DEFAULT_SCSI_CFG1 0x00AE
+#define ASC_MC_DEFAULT_MEM_CFG 0x00B0
+#define ASC_MC_DEFAULT_SEL_MASK 0x00B2
+#define ASC_MC_SDTR_DONE 0x00B6
+#define ASC_MC_NUMBER_OF_QUEUED_CMD 0x00C0
+#define ASC_MC_NUMBER_OF_MAX_CMD 0x00D0
+#define ASC_MC_DEVICE_HSHK_CFG_TABLE 0x0100
+#define ASC_MC_CONTROL_FLAG 0x0122 /* Microcode control flag. */
+#define ASC_MC_WDTR_DONE 0x0124
+#define ASC_MC_CAM_MODE_MASK 0x015E /* CAM mode TID bitmask. */
+#define ASC_MC_ICQ 0x0160
+#define ASC_MC_IRQ 0x0164
+#define ASC_MC_PPR_ABLE 0x017A
+
+/*
+ * BIOS LRAM variable absolute offsets.
+ */
+#define BIOS_CODESEG 0x54
+#define BIOS_CODELEN 0x56
+#define BIOS_SIGNATURE 0x58
+#define BIOS_VERSION 0x5A
+
+/*
+ * Microcode Control Flags
+ *
+ * Flags set by the Adv Library in RISC variable 'control_flag' (0x122)
+ * and handled by the microcode.
+ */
+#define CONTROL_FLAG_IGNORE_PERR 0x0001 /* Ignore DMA Parity Errors */
+#define CONTROL_FLAG_ENABLE_AIPP 0x0002 /* Enabled AIPP checking. */
+
+/*
+ * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format
+ */
+#define HSHK_CFG_WIDE_XFR 0x8000
+#define HSHK_CFG_RATE 0x0F00
+#define HSHK_CFG_OFFSET 0x001F
+
+#define ASC_DEF_MAX_HOST_QNG 0xFD /* Max. number of host commands (253) */
+#define ASC_DEF_MIN_HOST_QNG 0x10 /* Min. number of host commands (16) */
+#define ASC_DEF_MAX_DVC_QNG 0x3F /* Max. number commands per device (63) */
+#define ASC_DEF_MIN_DVC_QNG 0x04 /* Min. number commands per device (4) */
+
+#define ASC_QC_DATA_CHECK 0x01 /* Require ASC_QC_DATA_OUT set or clear. */
+#define ASC_QC_DATA_OUT 0x02 /* Data out DMA transfer. */
+#define ASC_QC_START_MOTOR 0x04 /* Send auto-start motor before request. */
+#define ASC_QC_NO_OVERRUN 0x08 /* Don't report overrun. */
+#define ASC_QC_FREEZE_TIDQ 0x10 /* Freeze TID queue after request. XXX TBD */
+
+#define ASC_QSC_NO_DISC 0x01 /* Don't allow disconnect for request. */
+#define ASC_QSC_NO_TAGMSG 0x02 /* Don't allow tag queuing for request. */
+#define ASC_QSC_NO_SYNC 0x04 /* Don't use Synch. transfer on request. */
+#define ASC_QSC_NO_WIDE 0x08 /* Don't use Wide transfer on request. */
+#define ASC_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR before request. */
+/*
+ * Note: If a Tag Message is to be sent and neither ASC_QSC_HEAD_TAG or
+ * ASC_QSC_ORDERED_TAG is set, then a Simple Tag Message (0x20) is used.
+ */
+#define ASC_QSC_HEAD_TAG 0x40 /* Use Head Tag Message (0x21). */
+#define ASC_QSC_ORDERED_TAG 0x80 /* Use Ordered Tag Message (0x22). */
+
+/*
+ * All fields here are accessed by the board microcode and need to be
+ * little-endian.
+ */
+typedef struct adv_carr_t
+{
+ ADV_VADDR carr_va; /* Carrier Virtual Address */
+ ADV_PADDR carr_pa; /* Carrier Physical Address */
+ ADV_VADDR areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */
+ /*
+ * next_vpa [31:4] Carrier Virtual or Physical Next Pointer
+ *
+ * next_vpa [3:1] Reserved Bits
+ * next_vpa [0] Done Flag set in Response Queue.
+ */
+ ADV_VADDR next_vpa;
+} ADV_CARR_T;
+
+/*
+ * Mask used to eliminate low 4 bits of carrier 'next_vpa' field.
+ */
+#define ASC_NEXT_VPA_MASK 0xFFFFFFF0
+
+#define ASC_RQ_DONE 0x00000001
+#define ASC_RQ_GOOD 0x00000002
+#define ASC_CQ_STOPPER 0x00000000
+
+#define ASC_GET_CARRP(carrp) ((carrp) & ASC_NEXT_VPA_MASK)
+
+#define ADV_CARRIER_NUM_PAGE_CROSSING \
+ (((ADV_CARRIER_COUNT * sizeof(ADV_CARR_T)) + \
+ (ADV_PAGE_SIZE - 1))/ADV_PAGE_SIZE)
+
+#define ADV_CARRIER_BUFSIZE \
+ ((ADV_CARRIER_COUNT + ADV_CARRIER_NUM_PAGE_CROSSING) * sizeof(ADV_CARR_T))
+
+/*
+ * ASC_SCSI_REQ_Q 'a_flag' definitions
+ *
+ * The Adv Library should limit use to the lower nibble (4 bits) of
+ * a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag.
+ */
+#define ADV_POLL_REQUEST 0x01 /* poll for request completion */
+#define ADV_SCSIQ_DONE 0x02 /* request done */
+#define ADV_DONT_RETRY 0x08 /* don't do retry */
+
+#define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */
+#define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */
+#define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */
+
+/*
+ * Adapter temporary configuration structure
+ *
+ * This structure can be discarded after initialization. Don't add
+ * fields here needed after initialization.
+ *
+ * Field naming convention:
+ *
+ * *_enable indicates the field enables or disables a feature. The
+ * value of the field is never reset.
+ */
+typedef struct adv_dvc_cfg {
+ ushort disc_enable; /* enable disconnection */
+ uchar chip_version; /* chip version */
+ uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */
+ ushort lib_version; /* Adv Library version number */
+ ushort control_flag; /* Microcode Control Flag */
+ ushort mcode_date; /* Microcode date */
+ ushort mcode_version; /* Microcode version */
+ ushort pci_slot_info; /* high byte device/function number */
+ /* bits 7-3 device num., bits 2-0 function num. */
+ /* low byte bus num. */
+ ushort serial1; /* EEPROM serial number word 1 */
+ ushort serial2; /* EEPROM serial number word 2 */
+ ushort serial3; /* EEPROM serial number word 3 */
+ struct device *dev; /* pointer to the pci dev structure for this board */
+} ADV_DVC_CFG;
+
+struct adv_dvc_var;
+struct adv_scsi_req_q;
+
+typedef void (* ADV_ISR_CALLBACK)
+ (struct adv_dvc_var *, struct adv_scsi_req_q *);
+
+typedef void (* ADV_ASYNC_CALLBACK)
+ (struct adv_dvc_var *, uchar);
+
+/*
+ * Adapter operation variable structure.
+ *
+ * One structure is required per host adapter.
+ *
+ * Field naming convention:
+ *
+ * *_able indicates both whether a feature should be enabled or disabled
+ * and whether a device isi capable of the feature. At initialization
+ * this field may be set, but later if a device is found to be incapable
+ * of the feature, the field is cleared.
+ */
+typedef struct adv_dvc_var {
+ AdvPortAddr iop_base; /* I/O port address */
+ ushort err_code; /* fatal error code */
+ ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */
+ ADV_ISR_CALLBACK isr_callback;
+ ADV_ASYNC_CALLBACK async_callback;
+ ushort wdtr_able; /* try WDTR for a device */
+ ushort sdtr_able; /* try SDTR for a device */
+ ushort ultra_able; /* try SDTR Ultra speed for a device */
+ ushort sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */
+ ushort sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */
+ ushort sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */
+ ushort sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */
+ ushort tagqng_able; /* try tagged queuing with a device */
+ ushort ppr_able; /* PPR message capable per TID bitmask. */
+ uchar max_dvc_qng; /* maximum number of tagged commands per device */
+ ushort start_motor; /* start motor command allowed */
+ uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */
+ uchar chip_no; /* should be assigned by caller */
+ uchar max_host_qng; /* maximum number of Q'ed command allowed */
+ uchar irq_no; /* IRQ number */
+ ushort no_scam; /* scam_tolerant of EEPROM */
+ struct asc_board *drv_ptr; /* driver pointer to private structure */
+ uchar chip_scsi_id; /* chip SCSI target ID */
+ uchar chip_type;
+ uchar bist_err_code;
+ ADV_CARR_T *carrier_buf;
+ ADV_CARR_T *carr_freelist; /* Carrier free list. */
+ ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */
+ ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */
+ ushort carr_pending_cnt; /* Count of pending carriers. */
+ /*
+ * Note: The following fields will not be used after initialization. The
+ * driver may discard the buffer after initialization is done.
+ */
+ ADV_DVC_CFG *cfg; /* temporary configuration structure */
+} ADV_DVC_VAR;
+
+#define NO_OF_SG_PER_BLOCK 15
+
+typedef struct asc_sg_block {
+ uchar reserved1;
+ uchar reserved2;
+ uchar reserved3;
+ uchar sg_cnt; /* Valid entries in block. */
+ ADV_PADDR sg_ptr; /* Pointer to next sg block. */
+ struct {
+ ADV_PADDR sg_addr; /* SG element address. */
+ ADV_DCNT sg_count; /* SG element count. */
+ } sg_list[NO_OF_SG_PER_BLOCK];
+} ADV_SG_BLOCK;
+
+/*
+ * ADV_SCSI_REQ_Q - microcode request structure
+ *
+ * All fields in this structure up to byte 60 are used by the microcode.
+ * The microcode makes assumptions about the size and ordering of fields
+ * in this structure. Do not change the structure definition here without
+ * coordinating the change with the microcode.
+ *
+ * All fields accessed by microcode must be maintained in little_endian
+ * order.
+ */
+typedef struct adv_scsi_req_q {
+ uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */
+ uchar target_cmd;
+ uchar target_id; /* Device target identifier. */
+ uchar target_lun; /* Device target logical unit number. */
+ ADV_PADDR data_addr; /* Data buffer physical address. */
+ ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */
+ ADV_PADDR sense_addr;
+ ADV_PADDR carr_pa;
+ uchar mflag;
+ uchar sense_len;
+ uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */
+ uchar scsi_cntl;
+ uchar done_status; /* Completion status. */
+ uchar scsi_status; /* SCSI status byte. */
+ uchar host_status; /* Ucode host status. */
+ uchar sg_working_ix;
+ uchar cdb[12]; /* SCSI CDB bytes 0-11. */
+ ADV_PADDR sg_real_addr; /* SG list physical address. */
+ ADV_PADDR scsiq_rptr;
+ uchar cdb16[4]; /* SCSI CDB bytes 12-15. */
+ ADV_VADDR scsiq_ptr;
+ ADV_VADDR carr_va;
+ /*
+ * End of microcode structure - 60 bytes. The rest of the structure
+ * is used by the Adv Library and ignored by the microcode.
+ */
+ ADV_VADDR srb_ptr;
+ ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
+ char *vdata_addr; /* Data buffer virtual address. */
+ uchar a_flag;
+ uchar pad[2]; /* Pad out to a word boundary. */
+} ADV_SCSI_REQ_Q;
+
+/*
+ * Microcode idle loop commands
+ */
+#define IDLE_CMD_COMPLETED 0
+#define IDLE_CMD_STOP_CHIP 0x0001
+#define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002
+#define IDLE_CMD_SEND_INT 0x0004
+#define IDLE_CMD_ABORT 0x0008
+#define IDLE_CMD_DEVICE_RESET 0x0010
+#define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */
+#define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */
+#define IDLE_CMD_SCSIREQ 0x0080
+
+#define IDLE_CMD_STATUS_SUCCESS 0x0001
+#define IDLE_CMD_STATUS_FAILURE 0x0002
+
+/*
+ * AdvSendIdleCmd() flag definitions.
+ */
+#define ADV_NOWAIT 0x01
+
+/*
+ * Wait loop time out values.
+ */
+#define SCSI_WAIT_10_SEC 10UL /* 10 seconds */
+#define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */
+#define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */
+#define SCSI_MS_PER_SEC 1000UL /* milliseconds per second */
+#define SCSI_MAX_RETRY 10 /* retry count */
+
+#define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */
+#define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */
+#define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */
+#define ADV_RDMA_IN_CARR_AND_Q_INVALID 0x04 /* RDMAed-in data invalid. */
+
+
+#define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */
+
+/*
+ * Device drivers must define the following functions.
+ */
+STATIC inline ulong DvcEnterCritical(void);
+STATIC inline void DvcLeaveCritical(ulong);
+STATIC void DvcSleepMilliSecond(ADV_DCNT);
+STATIC uchar DvcAdvReadPCIConfigByte(ADV_DVC_VAR *, ushort);
+STATIC void DvcAdvWritePCIConfigByte(ADV_DVC_VAR *, ushort, uchar);
+STATIC ADV_PADDR DvcGetPhyAddr(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *,
+ uchar *, ASC_SDCNT *, int);
+STATIC void DvcDelayMicroSecond(ADV_DVC_VAR *, ushort);
+
+/*
+ * Adv Library functions available to drivers.
+ */
+STATIC int AdvExeScsiQueue(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *);
+STATIC int AdvISR(ADV_DVC_VAR *);
+STATIC int AdvInitGetConfig(ADV_DVC_VAR *);
+STATIC int AdvInitAsc3550Driver(ADV_DVC_VAR *);
+STATIC int AdvInitAsc38C0800Driver(ADV_DVC_VAR *);
+STATIC int AdvInitAsc38C1600Driver(ADV_DVC_VAR *);
+STATIC int AdvResetChipAndSB(ADV_DVC_VAR *);
+STATIC int AdvResetSB(ADV_DVC_VAR *asc_dvc);
+
+/*
+ * Internal Adv Library functions.
+ */
+STATIC int AdvSendIdleCmd(ADV_DVC_VAR *, ushort, ADV_DCNT);
+STATIC void AdvInquiryHandling(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *);
+STATIC int AdvInitFrom3550EEP(ADV_DVC_VAR *);
+STATIC int AdvInitFrom38C0800EEP(ADV_DVC_VAR *);
+STATIC int AdvInitFrom38C1600EEP(ADV_DVC_VAR *);
+STATIC ushort AdvGet3550EEPConfig(AdvPortAddr, ADVEEP_3550_CONFIG *);
+STATIC void AdvSet3550EEPConfig(AdvPortAddr, ADVEEP_3550_CONFIG *);
+STATIC ushort AdvGet38C0800EEPConfig(AdvPortAddr, ADVEEP_38C0800_CONFIG *);
+STATIC void AdvSet38C0800EEPConfig(AdvPortAddr, ADVEEP_38C0800_CONFIG *);
+STATIC ushort AdvGet38C1600EEPConfig(AdvPortAddr, ADVEEP_38C1600_CONFIG *);
+STATIC void AdvSet38C1600EEPConfig(AdvPortAddr, ADVEEP_38C1600_CONFIG *);
+STATIC void AdvWaitEEPCmd(AdvPortAddr);
+STATIC ushort AdvReadEEPWord(AdvPortAddr, int);
+
+/*
+ * PCI Bus Definitions
+ */
+#define AscPCICmdRegBits_BusMastering 0x0007
+#define AscPCICmdRegBits_ParErrRespCtrl 0x0040
+
+/* Read byte from a register. */
+#define AdvReadByteRegister(iop_base, reg_off) \
+ (ADV_MEM_READB((iop_base) + (reg_off)))
+
+/* Write byte to a register. */
+#define AdvWriteByteRegister(iop_base, reg_off, byte) \
+ (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte)))
+
+/* Read word (2 bytes) from a register. */
+#define AdvReadWordRegister(iop_base, reg_off) \
+ (ADV_MEM_READW((iop_base) + (reg_off)))
+
+/* Write word (2 bytes) to a register. */
+#define AdvWriteWordRegister(iop_base, reg_off, word) \
+ (ADV_MEM_WRITEW((iop_base) + (reg_off), (word)))
+
+/* Write dword (4 bytes) to a register. */
+#define AdvWriteDWordRegister(iop_base, reg_off, dword) \
+ (ADV_MEM_WRITEDW((iop_base) + (reg_off), (dword)))
+
+/* Read byte from LRAM. */
+#define AdvReadByteLram(iop_base, addr, byte) \
+do { \
+ ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \
+ (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA); \
+} while (0)
+
+/* Write byte to LRAM. */
+#define AdvWriteByteLram(iop_base, addr, byte) \
+ (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
+ ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte)))
+
+/* Read word (2 bytes) from LRAM. */
+#define AdvReadWordLram(iop_base, addr, word) \
+do { \
+ ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \
+ (word) = (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)); \
+} while (0)
+
+/* Write word (2 bytes) to LRAM. */
+#define AdvWriteWordLram(iop_base, addr, word) \
+ (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
+ ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word)))
+
+/* Write little-endian double word (4 bytes) to LRAM */
+/* Because of unspecified C language ordering don't use auto-increment. */
+#define AdvWriteDWordLramNoSwap(iop_base, addr, dword) \
+ ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \
+ ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \
+ cpu_to_le16((ushort) ((dword) & 0xFFFF)))), \
+ (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2), \
+ ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \
+ cpu_to_le16((ushort) ((dword >> 16) & 0xFFFF)))))
+
+/* Read word (2 bytes) from LRAM assuming that the address is already set. */
+#define AdvReadWordAutoIncLram(iop_base) \
+ (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA))
+
+/* Write word (2 bytes) to LRAM assuming that the address is already set. */
+#define AdvWriteWordAutoIncLram(iop_base, word) \
+ (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word)))
+
+
+/*
+ * Define macro to check for Condor signature.
+ *
+ * Evaluate to ADV_TRUE if a Condor chip is found the specified port
+ * address 'iop_base'. Otherwise evalue to ADV_FALSE.
+ */
+#define AdvFindSignature(iop_base) \
+ (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1) == \
+ ADV_CHIP_ID_BYTE) && \
+ (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0) == \
+ ADV_CHIP_ID_WORD)) ? ADV_TRUE : ADV_FALSE)
+
+/*
+ * Define macro to Return the version number of the chip at 'iop_base'.
+ *
+ * The second parameter 'bus_type' is currently unused.
+ */
+#define AdvGetChipVersion(iop_base, bus_type) \
+ AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV)
+
+/*
+ * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must
+ * match the ASC_SCSI_REQ_Q 'srb_ptr' field.
+ *
+ * If the request has not yet been sent to the device it will simply be
+ * aborted from RISC memory. If the request is disconnected it will be
+ * aborted on reselection by sending an Abort Message to the target ID.
+ *
+ * Return value:
+ * ADV_TRUE(1) - Queue was successfully aborted.
+ * ADV_FALSE(0) - Queue was not found on the active queue list.
+ */
+#define AdvAbortQueue(asc_dvc, scsiq) \
+ AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \
+ (ADV_DCNT) (scsiq))
+
+/*
+ * Send a Bus Device Reset Message to the specified target ID.
+ *
+ * All outstanding commands will be purged if sending the
+ * Bus Device Reset Message is successful.
+ *
+ * Return Value:
+ * ADV_TRUE(1) - All requests on the target are purged.
+ * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests
+ * are not purged.
+ */
+#define AdvResetDevice(asc_dvc, target_id) \
+ AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \
+ (ADV_DCNT) (target_id))
+
+/*
+ * SCSI Wide Type definition.
+ */
+#define ADV_SCSI_BIT_ID_TYPE ushort
+
+/*
+ * AdvInitScsiTarget() 'cntl_flag' options.
+ */
+#define ADV_SCAN_LUN 0x01
+#define ADV_CAPINFO_NOLUN 0x02
+
+/*
+ * Convert target id to target id bit mask.
+ */
+#define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID))
+
+/*
+ * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values.
+ */
+
+#define QD_NO_STATUS 0x00 /* Request not completed yet. */
+#define QD_NO_ERROR 0x01
+#define QD_ABORTED_BY_HOST 0x02
+#define QD_WITH_ERROR 0x04
+
+#define QHSTA_NO_ERROR 0x00
+#define QHSTA_M_SEL_TIMEOUT 0x11
+#define QHSTA_M_DATA_OVER_RUN 0x12
+#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13
+#define QHSTA_M_QUEUE_ABORTED 0x15
+#define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */
+#define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */
+#define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */
+#define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */
+#define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */
+#define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */
+#define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */
+/* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */
+#define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */
+#define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */
+#define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */
+#define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */
+#define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */
+#define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */
+#define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */
+#define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */
+#define QHSTA_M_WTM_TIMEOUT 0x41
+#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42
+#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43
+#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44
+#define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */
+#define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */
+#define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */
+
+
+/*
+ * Default EEPROM Configuration structure defined in a_init.c.
+ */
+static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config;
+static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config;
+static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config;
+
+/*
+ * DvcGetPhyAddr() flag arguments
+ */
+#define ADV_IS_SCSIQ_FLAG 0x01 /* 'addr' is ASC_SCSI_REQ_Q pointer */
+#define ADV_ASCGETSGLIST_VADDR 0x02 /* 'addr' is AscGetSGList() virtual addr */
+#define ADV_IS_SENSE_FLAG 0x04 /* 'addr' is sense virtual pointer */
+#define ADV_IS_DATA_FLAG 0x08 /* 'addr' is data virtual pointer */
+#define ADV_IS_SGLIST_FLAG 0x10 /* 'addr' is sglist virtual pointer */
+#define ADV_IS_CARRIER_FLAG 0x20 /* 'addr' is ADV_CARR_T pointer */
+
+/* Return the address that is aligned at the next doubleword >= to 'addr'. */
+#define ADV_8BALIGN(addr) (((ulong) (addr) + 0x7) & ~0x7)
+#define ADV_16BALIGN(addr) (((ulong) (addr) + 0xF) & ~0xF)
+#define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F)
+
+/*
+ * Total contiguous memory needed for driver SG blocks.
+ *
+ * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum
+ * number of scatter-gather elements the driver supports in a
+ * single request.
+ */
+
+#define ADV_SG_LIST_MAX_BYTE_SIZE \
+ (sizeof(ADV_SG_BLOCK) * \
+ ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK))
+
+/*
+ * Inquiry data structure and bitfield macros
+ *
+ * Using bitfields to access the subchar data isn't portable across
+ * endianness, so instead mask and shift. Only quantities of more
+ * than 1 bit are shifted, since the others are just tested for true
+ * or false.
+ */
+
+#define ADV_INQ_DVC_TYPE(inq) ((inq)->periph & 0x1f)
+#define ADV_INQ_QUALIFIER(inq) (((inq)->periph & 0xe0) >> 5)
+#define ADV_INQ_DVC_TYPE_MOD(inq) ((inq)->devtype & 0x7f)
+#define ADV_INQ_REMOVABLE(inq) ((inq)->devtype & 0x80)
+#define ADV_INQ_ANSI_VER(inq) ((inq)->ver & 0x07)
+#define ADV_INQ_ECMA_VER(inq) (((inq)->ver & 0x38) >> 3)
+#define ADV_INQ_ISO_VER(inq) (((inq)->ver & 0xc0) >> 6)
+#define ADV_INQ_RESPONSE_FMT(inq) ((inq)->byte3 & 0x0f)
+#define ADV_INQ_TERM_IO(inq) ((inq)->byte3 & 0x40)
+#define ADV_INQ_ASYNC_NOTIF(inq) ((inq)->byte3 & 0x80)
+#define ADV_INQ_SOFT_RESET(inq) ((inq)->flags & 0x01)
+#define ADV_INQ_CMD_QUEUE(inq) ((inq)->flags & 0x02)
+#define ADV_INQ_LINK_CMD(inq) ((inq)->flags & 0x08)
+#define ADV_INQ_SYNC(inq) ((inq)->flags & 0x10)
+#define ADV_INQ_WIDE16(inq) ((inq)->flags & 0x20)
+#define ADV_INQ_WIDE32(inq) ((inq)->flags & 0x40)
+#define ADV_INQ_REL_ADDR(inq) ((inq)->flags & 0x80)
+#define ADV_INQ_INFO_UNIT(inq) ((inq)->info & 0x01)
+#define ADV_INQ_QUICK_ARB(inq) ((inq)->info & 0x02)
+#define ADV_INQ_CLOCKING(inq) (((inq)->info & 0x0c) >> 2)
+
+typedef struct {
+ uchar periph; /* peripheral device type [0:4] */
+ /* peripheral qualifier [5:7] */
+ uchar devtype; /* device type modifier (for SCSI I) [0:6] */
+ /* RMB - removable medium bit [7] */
+ uchar ver; /* ANSI approved version [0:2] */
+ /* ECMA version [3:5] */
+ /* ISO version [6:7] */
+ uchar byte3; /* response data format [0:3] */
+ /* 0 SCSI 1 */
+ /* 1 CCS */
+ /* 2 SCSI-2 */
+ /* 3-F reserved */
+ /* reserved [4:5] */
+ /* terminate I/O process bit (see 5.6.22) [6] */
+ /* asynch. event notification (processor) [7] */
+ uchar add_len; /* additional length */
+ uchar res1; /* reserved */
+ uchar res2; /* reserved */
+ uchar flags; /* soft reset implemented [0] */
+ /* command queuing [1] */
+ /* reserved [2] */
+ /* linked command for this logical unit [3] */
+ /* synchronous data transfer [4] */
+ /* wide bus 16 bit data transfer [5] */
+ /* wide bus 32 bit data transfer [6] */
+ /* relative addressing mode [7] */
+ uchar vendor_id[8]; /* vendor identification */
+ uchar product_id[16]; /* product identification */
+ uchar product_rev_level[4]; /* product revision level */
+ uchar vendor_specific[20]; /* vendor specific */
+ uchar info; /* information unit supported [0] */
+ /* quick arbitrate supported [1] */
+ /* clocking field [2:3] */
+ /* reserved [4:7] */
+ uchar res3; /* reserved */
+} ADV_SCSI_INQUIRY; /* 58 bytes */
+
+
+/*
+ * --- Driver Constants and Macros
+ */
+
+#define ASC_NUM_BOARD_SUPPORTED 16
+#define ASC_NUM_IOPORT_PROBE 4
+#define ASC_NUM_BUS 4
+
+/* Reference Scsi_Host hostdata */
+#define ASC_BOARDP(host) ((asc_board_t *) &((host)->hostdata))
+
+/* asc_board_t flags */
+#define ASC_HOST_IN_RESET 0x01
+#define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */
+#define ASC_SELECT_QUEUE_DEPTHS 0x08
+
+#define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0)
+#define ASC_WIDE_BOARD(boardp) ((boardp)->flags & ASC_IS_WIDE_BOARD)
+
+#define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */
+
+#define ASC_INFO_SIZE 128 /* advansys_info() line size */
+
+#ifdef CONFIG_PROC_FS
+/* /proc/scsi/advansys/[0...] related definitions */
+#define ASC_PRTBUF_SIZE 2048
+#define ASC_PRTLINE_SIZE 160
+
+#define ASC_PRT_NEXT() \
+ if (cp) { \
+ totlen += len; \
+ leftlen -= len; \
+ if (leftlen == 0) { \
+ return totlen; \
+ } \
+ cp += len; \
+ }
+#endif /* CONFIG_PROC_FS */
+
+/* Asc Library return codes */
+#define ASC_TRUE 1
+#define ASC_FALSE 0
+#define ASC_NOERROR 1
+#define ASC_BUSY 0
+#define ASC_ERROR (-1)
+
+/* struct scsi_cmnd function return codes */
+#define STATUS_BYTE(byte) (byte)
+#define MSG_BYTE(byte) ((byte) << 8)
+#define HOST_BYTE(byte) ((byte) << 16)
+#define DRIVER_BYTE(byte) ((byte) << 24)
+
+/*
+ * The following definitions and macros are OS independent interfaces to
+ * the queue functions:
+ * REQ - SCSI request structure
+ * REQP - pointer to SCSI request structure
+ * REQPTID(reqp) - reqp's target id
+ * REQPNEXT(reqp) - reqp's next pointer
+ * REQPNEXTP(reqp) - pointer to reqp's next pointer
+ * REQPTIME(reqp) - reqp's time stamp value
+ * REQTIMESTAMP() - system time stamp value
+ */
+typedef struct scsi_cmnd REQ, *REQP;
+#define REQPNEXT(reqp) ((REQP) ((reqp)->host_scribble))
+#define REQPNEXTP(reqp) ((REQP *) &((reqp)->host_scribble))
+#define REQPTID(reqp) ((reqp)->device->id)
+#define REQPTIME(reqp) ((reqp)->SCp.this_residual)
+#define REQTIMESTAMP() (jiffies)
+
+#define REQTIMESTAT(function, ascq, reqp, tid) \
+{ \
+ /*
+ * If the request time stamp is less than the system time stamp, then \
+ * maybe the system time stamp wrapped. Set the request time to zero.\
+ */ \
+ if (REQPTIME(reqp) <= REQTIMESTAMP()) { \
+ REQPTIME(reqp) = REQTIMESTAMP() - REQPTIME(reqp); \
+ } else { \
+ /* Indicate an error occurred with the assertion. */ \
+ ASC_ASSERT(REQPTIME(reqp) <= REQTIMESTAMP()); \
+ REQPTIME(reqp) = 0; \
+ } \
+ /* Handle first minimum time case without external initialization. */ \
+ if (((ascq)->q_tot_cnt[tid] == 1) || \
+ (REQPTIME(reqp) < (ascq)->q_min_tim[tid])) { \
+ (ascq)->q_min_tim[tid] = REQPTIME(reqp); \
+ ASC_DBG3(1, "%s: new q_min_tim[%d] %u\n", \
+ (function), (tid), (ascq)->q_min_tim[tid]); \
+ } \
+ if (REQPTIME(reqp) > (ascq)->q_max_tim[tid]) { \
+ (ascq)->q_max_tim[tid] = REQPTIME(reqp); \
+ ASC_DBG3(1, "%s: new q_max_tim[%d] %u\n", \
+ (function), tid, (ascq)->q_max_tim[tid]); \
+ } \
+ (ascq)->q_tot_tim[tid] += REQPTIME(reqp); \
+ /* Reset the time stamp field. */ \
+ REQPTIME(reqp) = 0; \
+}
+
+/* asc_enqueue() flags */
+#define ASC_FRONT 1
+#define ASC_BACK 2
+
+/* asc_dequeue_list() argument */
+#define ASC_TID_ALL (-1)
+
+/* Return non-zero, if the queue is empty. */
+#define ASC_QUEUE_EMPTY(ascq) ((ascq)->q_tidmask == 0)
+
+#define PCI_MAX_SLOT 0x1F
+#define PCI_MAX_BUS 0xFF
+#define PCI_IOADDRESS_MASK 0xFFFE
+#define ASC_PCI_VENDORID 0x10CD
+#define ASC_PCI_DEVICE_ID_CNT 6 /* PCI Device ID count. */
+#define ASC_PCI_DEVICE_ID_1100 0x1100
+#define ASC_PCI_DEVICE_ID_1200 0x1200
+#define ASC_PCI_DEVICE_ID_1300 0x1300
+#define ASC_PCI_DEVICE_ID_2300 0x2300 /* ASC-3550 */
+#define ASC_PCI_DEVICE_ID_2500 0x2500 /* ASC-38C0800 */
+#define ASC_PCI_DEVICE_ID_2700 0x2700 /* ASC-38C1600 */
+
+#ifndef ADVANSYS_STATS
+#define ASC_STATS(shp, counter)
+#define ASC_STATS_ADD(shp, counter, count)
+#else /* ADVANSYS_STATS */
+#define ASC_STATS(shp, counter) \
+ (ASC_BOARDP(shp)->asc_stats.counter++)
+
+#define ASC_STATS_ADD(shp, counter, count) \
+ (ASC_BOARDP(shp)->asc_stats.counter += (count))
+#endif /* ADVANSYS_STATS */
+
+#define ASC_CEILING(val, unit) (((val) + ((unit) - 1))/(unit))
+
+/* If the result wraps when calculating tenths, return 0. */
+#define ASC_TENTHS(num, den) \
+ (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \
+ 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den)))))
+
+/*
+ * Display a message to the console.
+ */
+#define ASC_PRINT(s) \
+ { \
+ printk("advansys: "); \
+ printk(s); \
+ }
+
+#define ASC_PRINT1(s, a1) \
+ { \
+ printk("advansys: "); \
+ printk((s), (a1)); \
+ }
+
+#define ASC_PRINT2(s, a1, a2) \
+ { \
+ printk("advansys: "); \
+ printk((s), (a1), (a2)); \
+ }
+
+#define ASC_PRINT3(s, a1, a2, a3) \
+ { \
+ printk("advansys: "); \
+ printk((s), (a1), (a2), (a3)); \
+ }
+
+#define ASC_PRINT4(s, a1, a2, a3, a4) \
+ { \
+ printk("advansys: "); \
+ printk((s), (a1), (a2), (a3), (a4)); \
+ }
+
+
+#ifndef ADVANSYS_DEBUG
+
+#define ASC_DBG(lvl, s)
+#define ASC_DBG1(lvl, s, a1)
+#define ASC_DBG2(lvl, s, a1, a2)
+#define ASC_DBG3(lvl, s, a1, a2, a3)
+#define ASC_DBG4(lvl, s, a1, a2, a3, a4)
+#define ASC_DBG_PRT_SCSI_HOST(lvl, s)
+#define ASC_DBG_PRT_SCSI_CMND(lvl, s)
+#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp)
+#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp)
+#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone)
+#define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp)
+#define ASC_DBG_PRT_HEX(lvl, name, start, length)
+#define ASC_DBG_PRT_CDB(lvl, cdb, len)
+#define ASC_DBG_PRT_SENSE(lvl, sense, len)
+#define ASC_DBG_PRT_INQUIRY(lvl, inq, len)
+
+#else /* ADVANSYS_DEBUG */
+
+/*
+ * Debugging Message Levels:
+ * 0: Errors Only
+ * 1: High-Level Tracing
+ * 2-N: Verbose Tracing
+ */
+
+#define ASC_DBG(lvl, s) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ printk(s); \
+ } \
+ }
+
+#define ASC_DBG1(lvl, s, a1) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ printk((s), (a1)); \
+ } \
+ }
+
+#define ASC_DBG2(lvl, s, a1, a2) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ printk((s), (a1), (a2)); \
+ } \
+ }
+
+#define ASC_DBG3(lvl, s, a1, a2, a3) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ printk((s), (a1), (a2), (a3)); \
+ } \
+ }
+
+#define ASC_DBG4(lvl, s, a1, a2, a3, a4) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ printk((s), (a1), (a2), (a3), (a4)); \
+ } \
+ }
+
+#define ASC_DBG_PRT_SCSI_HOST(lvl, s) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_scsi_host(s); \
+ } \
+ }
+
+#define ASC_DBG_PRT_SCSI_CMND(lvl, s) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_scsi_cmnd(s); \
+ } \
+ }
+
+#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_asc_scsi_q(scsiqp); \
+ } \
+ }
+
+#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_asc_qdone_info(qdone); \
+ } \
+ }
+
+#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_adv_scsi_req_q(scsiqp); \
+ } \
+ }
+
+#define ASC_DBG_PRT_HEX(lvl, name, start, length) \
+ { \
+ if (asc_dbglvl >= (lvl)) { \
+ asc_prt_hex((name), (start), (length)); \
+ } \
+ }
+
+#define ASC_DBG_PRT_CDB(lvl, cdb, len) \
+ ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len));
+
+#define ASC_DBG_PRT_SENSE(lvl, sense, len) \
+ ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len));
+
+#define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \
+ ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len));
+#endif /* ADVANSYS_DEBUG */
+
+#ifndef ADVANSYS_ASSERT
+#define ASC_ASSERT(a)
+#else /* ADVANSYS_ASSERT */
+
+#define ASC_ASSERT(a) \
+ { \
+ if (!(a)) { \
+ printk("ASC_ASSERT() Failure: file %s, line %d\n", \
+ __FILE__, __LINE__); \
+ } \
+ }
+
+#endif /* ADVANSYS_ASSERT */
+
+
+/*
+ * --- Driver Structures
+ */
+
+#ifdef ADVANSYS_STATS
+
+/* Per board statistics structure */
+struct asc_stats {
+ /* Driver Entrypoint Statistics */
+ ADV_DCNT queuecommand; /* # calls to advansys_queuecommand() */
+ ADV_DCNT reset; /* # calls to advansys_eh_bus_reset() */
+ ADV_DCNT biosparam; /* # calls to advansys_biosparam() */
+ ADV_DCNT interrupt; /* # advansys_interrupt() calls */
+ ADV_DCNT callback; /* # calls to asc/adv_isr_callback() */
+ ADV_DCNT done; /* # calls to request's scsi_done function */
+ ADV_DCNT build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
+ ADV_DCNT adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
+ ADV_DCNT adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
+ /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */
+ ADV_DCNT exe_noerror; /* # ASC_NOERROR returns. */
+ ADV_DCNT exe_busy; /* # ASC_BUSY returns. */
+ ADV_DCNT exe_error; /* # ASC_ERROR returns. */
+ ADV_DCNT exe_unknown; /* # unknown returns. */
+ /* Data Transfer Statistics */
+ ADV_DCNT cont_cnt; /* # non-scatter-gather I/O requests received */
+ ADV_DCNT cont_xfer; /* # contiguous transfer 512-bytes */
+ ADV_DCNT sg_cnt; /* # scatter-gather I/O requests received */
+ ADV_DCNT sg_elem; /* # scatter-gather elements */
+ ADV_DCNT sg_xfer; /* # scatter-gather transfer 512-bytes */
+};
+#endif /* ADVANSYS_STATS */
+
+/*
+ * Request queuing structure
+ */
+typedef struct asc_queue {
+ ADV_SCSI_BIT_ID_TYPE q_tidmask; /* queue mask */
+ REQP q_first[ADV_MAX_TID+1]; /* first queued request */
+ REQP q_last[ADV_MAX_TID+1]; /* last queued request */
+#ifdef ADVANSYS_STATS
+ short q_cur_cnt[ADV_MAX_TID+1]; /* current queue count */
+ short q_max_cnt[ADV_MAX_TID+1]; /* maximum queue count */
+ ADV_DCNT q_tot_cnt[ADV_MAX_TID+1]; /* total enqueue count */
+ ADV_DCNT q_tot_tim[ADV_MAX_TID+1]; /* total time queued */
+ ushort q_max_tim[ADV_MAX_TID+1]; /* maximum time queued */
+ ushort q_min_tim[ADV_MAX_TID+1]; /* minimum time queued */
+#endif /* ADVANSYS_STATS */
+} asc_queue_t;
+
+/*
+ * Adv Library Request Structures
+ *
+ * The following two structures are used to process Wide Board requests.
+ *
+ * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library
+ * and microcode with the ADV_SCSI_REQ_Q field 'srb_ptr' pointing to the
+ * adv_req_t. The adv_req_t structure 'cmndp' field in turn points to the
+ * Mid-Level SCSI request structure.
+ *
+ * Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each
+ * ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux
+ * up to 255 scatter-gather elements may be used per request or
+ * ADV_SCSI_REQ_Q.
+ *
+ * Both structures must be 32 byte aligned.
+ */
+typedef struct adv_sgblk {
+ ADV_SG_BLOCK sg_block; /* Sgblock structure. */
+ uchar align[32]; /* Sgblock structure padding. */
+ struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */
+} adv_sgblk_t;
+
+typedef struct adv_req {
+ ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */
+ uchar align[32]; /* Request structure padding. */
+ struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */
+ adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */
+ struct adv_req *next_reqp; /* Next Request Structure. */
+} adv_req_t;
+
+/*
+ * Structure allocated for each board.
+ *
+ * This structure is allocated by scsi_register() at the end
+ * of the 'Scsi_Host' structure starting at the 'hostdata'
+ * field. It is guaranteed to be allocated from DMA-able memory.
+ */
+typedef struct asc_board {
+ int id; /* Board Id */
+ uint flags; /* Board flags */
+ union {
+ ASC_DVC_VAR asc_dvc_var; /* Narrow board */
+ ADV_DVC_VAR adv_dvc_var; /* Wide board */
+ } dvc_var;
+ union {
+ ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */
+ ADV_DVC_CFG adv_dvc_cfg; /* Wide board */
+ } dvc_cfg;
+ ushort asc_n_io_port; /* Number I/O ports. */
+ asc_queue_t active; /* Active command queue */
+ asc_queue_t waiting; /* Waiting command queue */
+ asc_queue_t done; /* Done command queue */
+ ADV_SCSI_BIT_ID_TYPE init_tidmask; /* Target init./valid mask */
+ struct scsi_device *device[ADV_MAX_TID+1]; /* Mid-Level Scsi Device */
+ ushort reqcnt[ADV_MAX_TID+1]; /* Starvation request count */
+ ADV_SCSI_BIT_ID_TYPE queue_full; /* Queue full mask */
+ ushort queue_full_cnt[ADV_MAX_TID+1]; /* Queue full count */
+ union {
+ ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */
+ ADVEEP_3550_CONFIG adv_3550_eep; /* 3550 EEPROM config. */
+ ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */
+ ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */
+ } eep_config;
+ ulong last_reset; /* Saved last reset time */
+ spinlock_t lock; /* Board spinlock */
+#ifdef CONFIG_PROC_FS
+ /* /proc/scsi/advansys/[0...] */
+ char *prtbuf; /* /proc print buffer */
+#endif /* CONFIG_PROC_FS */
+#ifdef ADVANSYS_STATS
+ struct asc_stats asc_stats; /* Board statistics */
+#endif /* ADVANSYS_STATS */
+ /*
+ * The following fields are used only for Narrow Boards.
+ */
+ /* The following three structures must be in DMA-able memory. */
+ ASC_SCSI_REQ_Q scsireqq;
+ ASC_CAP_INFO cap_info;
+ ASC_SCSI_INQUIRY inquiry;
+ uchar sdtr_data[ASC_MAX_TID+1]; /* SDTR information */
+ /*
+ * The following fields are used only for Wide Boards.
+ */
+ void *ioremap_addr; /* I/O Memory remap address. */
+ ushort ioport; /* I/O Port address. */
+ ADV_CARR_T *orig_carrp; /* ADV_CARR_T memory block. */
+ adv_req_t *orig_reqp; /* adv_req_t memory block. */
+ adv_req_t *adv_reqp; /* Request structures. */
+ adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */
+ ushort bios_signature; /* BIOS Signature. */
+ ushort bios_version; /* BIOS Version. */
+ ushort bios_codeseg; /* BIOS Code Segment. */
+ ushort bios_codelen; /* BIOS Code Segment Length. */
+} asc_board_t;
+
+/*
+ * PCI configuration structures
+ */
+typedef struct _PCI_DATA_
+{
+ uchar type;
+ uchar bus;
+ uchar slot;
+ uchar func;
+ uchar offset;
+} PCI_DATA;
+
+typedef struct _PCI_DEVICE_
+{
+ ushort vendorID;
+ ushort deviceID;
+ ushort slotNumber;
+ ushort slotFound;
+ uchar busNumber;
+ uchar maxBusNumber;
+ uchar devFunc;
+ ushort startSlot;
+ ushort endSlot;
+ uchar bridge;
+ uchar type;
+} PCI_DEVICE;
+
+typedef struct _PCI_CONFIG_SPACE_
+{
+ ushort vendorID;
+ ushort deviceID;
+ ushort command;
+ ushort status;
+ uchar revision;
+ uchar classCode[3];
+ uchar cacheSize;
+ uchar latencyTimer;
+ uchar headerType;
+ uchar bist;
+ ADV_PADDR baseAddress[6];
+ ushort reserved[4];
+ ADV_PADDR optionRomAddr;
+ ushort reserved2[4];
+ uchar irqLine;
+ uchar irqPin;
+ uchar minGnt;
+ uchar maxLatency;
+} PCI_CONFIG_SPACE;
+
+
+/*
+ * --- Driver Data
+ */
+
+/* Note: All driver global data should be initialized. */
+
+/* Number of boards detected in system. */
+STATIC int asc_board_count = 0;
+STATIC struct Scsi_Host *asc_host[ASC_NUM_BOARD_SUPPORTED] = { 0 };
+
+/* Overrun buffer used by all narrow boards. */
+STATIC uchar overrun_buf[ASC_OVERRUN_BSIZE] = { 0 };
+
+/*
+ * Global structures required to issue a command.
+ */
+STATIC ASC_SCSI_Q asc_scsi_q = { { 0 } };
+STATIC ASC_SG_HEAD asc_sg_head = { 0 };
+
+/* List of supported bus types. */
+STATIC ushort asc_bus[ASC_NUM_BUS] __initdata = {
+ ASC_IS_ISA,
+ ASC_IS_VL,
+ ASC_IS_EISA,
+ ASC_IS_PCI,
+};
+
+/*
+ * Used with the LILO 'advansys' option to eliminate or
+ * limit I/O port probing at boot time, cf. advansys_setup().
+ */
+STATIC int asc_iopflag = ASC_FALSE;
+STATIC int asc_ioport[ASC_NUM_IOPORT_PROBE] = { 0, 0, 0, 0 };
+
+#ifdef ADVANSYS_DEBUG
+STATIC char *
+asc_bus_name[ASC_NUM_BUS] = {
+ "ASC_IS_ISA",
+ "ASC_IS_VL",
+ "ASC_IS_EISA",
+ "ASC_IS_PCI",
+};
+
+STATIC int asc_dbglvl = 3;
+#endif /* ADVANSYS_DEBUG */
+
+/* Declaration for Asc Library internal data referenced by driver. */
+STATIC PortAddr _asc_def_iop_base[];
+
+
+/*
+ * --- Driver Function Prototypes
+ *
+ * advansys.h contains function prototypes for functions global to Linux.
+ */
+
+STATIC irqreturn_t advansys_interrupt(int, void *, struct pt_regs *);
+STATIC int advansys_slave_configure(struct scsi_device *);
+STATIC void asc_scsi_done_list(struct scsi_cmnd *);
+STATIC int asc_execute_scsi_cmnd(struct scsi_cmnd *);
+STATIC int asc_build_req(asc_board_t *, struct scsi_cmnd *);
+STATIC int adv_build_req(asc_board_t *, struct scsi_cmnd *, ADV_SCSI_REQ_Q **);
+STATIC int adv_get_sglist(asc_board_t *, adv_req_t *, struct scsi_cmnd *, int);
+STATIC void asc_isr_callback(ASC_DVC_VAR *, ASC_QDONE_INFO *);
+STATIC void adv_isr_callback(ADV_DVC_VAR *, ADV_SCSI_REQ_Q *);
+STATIC void adv_async_callback(ADV_DVC_VAR *, uchar);
+STATIC void asc_enqueue(asc_queue_t *, REQP, int);
+STATIC REQP asc_dequeue(asc_queue_t *, int);
+STATIC REQP asc_dequeue_list(asc_queue_t *, REQP *, int);
+STATIC int asc_rmqueue(asc_queue_t *, REQP);
+STATIC void asc_execute_queue(asc_queue_t *);
+#ifdef CONFIG_PROC_FS
+STATIC int asc_proc_copy(off_t, off_t, char *, int , char *, int);
+STATIC int asc_prt_board_devices(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_adv_bios(struct Scsi_Host *, char *, int);
+STATIC int asc_get_eeprom_string(ushort *serialnum, uchar *cp);
+STATIC int asc_prt_asc_board_eeprom(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_adv_board_eeprom(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_driver_conf(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_asc_board_info(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_adv_board_info(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_line(char *, int, char *fmt, ...);
+#endif /* CONFIG_PROC_FS */
+
+/* Declaration for Asc Library internal functions referenced by driver. */
+STATIC int AscFindSignature(PortAddr);
+STATIC ushort AscGetEEPConfig(PortAddr, ASCEEP_CONFIG *, ushort);
+
+/* Statistics function prototypes. */
+#ifdef ADVANSYS_STATS
+#ifdef CONFIG_PROC_FS
+STATIC int asc_prt_board_stats(struct Scsi_Host *, char *, int);
+STATIC int asc_prt_target_stats(struct Scsi_Host *, int, char *, int);
+#endif /* CONFIG_PROC_FS */
+#endif /* ADVANSYS_STATS */
+
+/* Debug function prototypes. */
+#ifdef ADVANSYS_DEBUG
+STATIC void asc_prt_scsi_host(struct Scsi_Host *);
+STATIC void asc_prt_scsi_cmnd(struct scsi_cmnd *);
+STATIC void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *);
+STATIC void asc_prt_asc_dvc_var(ASC_DVC_VAR *);
+STATIC void asc_prt_asc_scsi_q(ASC_SCSI_Q *);
+STATIC void asc_prt_asc_qdone_info(ASC_QDONE_INFO *);
+STATIC void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *);
+STATIC void asc_prt_adv_dvc_var(ADV_DVC_VAR *);
+STATIC void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *);
+STATIC void asc_prt_adv_sgblock(int, ADV_SG_BLOCK *);
+STATIC void asc_prt_hex(char *f, uchar *, int);
+#endif /* ADVANSYS_DEBUG */
+
+
+/*
+ * --- Linux 'Scsi_Host_Template' and advansys_setup() Functions
+ */
+
+#ifdef CONFIG_PROC_FS
+/*
+ * advansys_proc_info() - /proc/scsi/advansys/[0-(ASC_NUM_BOARD_SUPPORTED-1)]
+ *
+ * *buffer: I/O buffer
+ * **start: if inout == FALSE pointer into buffer where user read should start
+ * offset: current offset into a /proc/scsi/advansys/[0...] file
+ * length: length of buffer
+ * hostno: Scsi_Host host_no
+ * inout: TRUE - user is writing; FALSE - user is reading
+ *
+ * Return the number of bytes read from or written to a
+ * /proc/scsi/advansys/[0...] file.
+ *
+ * Note: This function uses the per board buffer 'prtbuf' which is
+ * allocated when the board is initialized in advansys_detect(). The
+ * buffer is ASC_PRTBUF_SIZE bytes. The function asc_proc_copy() is
+ * used to write to the buffer. The way asc_proc_copy() is written
+ * if 'prtbuf' is too small it will not be overwritten. Instead the
+ * user just won't get all the available statistics.
+ */
+int
+advansys_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
+ off_t offset, int length, int inout)
+{
+ struct Scsi_Host *shp;
+ asc_board_t *boardp;
+ int i;
+ char *cp;
+ int cplen;
+ int cnt;
+ int totcnt;
+ int leftlen;
+ char *curbuf;
+ off_t advoffset;
+#ifdef ADVANSYS_STATS
+ int tgt_id;
+#endif /* ADVANSYS_STATS */
+
+ ASC_DBG(1, "advansys_proc_info: begin\n");
+
+ /*
+ * User write not supported.
+ */
+ if (inout == TRUE) {
+ return(-ENOSYS);
+ }
+
+ /*
+ * User read of /proc/scsi/advansys/[0...] file.
+ */
+
+ /* Find the specified board. */
+ for (i = 0; i < asc_board_count; i++) {
+ if (asc_host[i]->host_no == shost->host_no) {
+ break;
+ }
+ }
+ if (i == asc_board_count) {
+ return(-ENOENT);
+ }
+
+ shp = asc_host[i];
+ boardp = ASC_BOARDP(shp);
+
+ /* Copy read data starting at the beginning of the buffer. */
+ *start = buffer;
+ curbuf = buffer;
+ advoffset = 0;
+ totcnt = 0;
+ leftlen = length;
+
+ /*
+ * Get board configuration information.
+ *
+ * advansys_info() returns the board string from its own static buffer.
+ */
+ cp = (char *) advansys_info(shp);
+ strcat(cp, "\n");
+ cplen = strlen(cp);
+ /* Copy board information. */
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+ /*
+ * Display Wide Board BIOS Information.
+ */
+ if (ASC_WIDE_BOARD(boardp)) {
+ cp = boardp->prtbuf;
+ cplen = asc_prt_adv_bios(shp, cp, ASC_PRTBUF_SIZE);
+ ASC_ASSERT(cplen < ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+ }
+
+ /*
+ * Display driver information for each device attached to the board.
+ */
+ cp = boardp->prtbuf;
+ cplen = asc_prt_board_devices(shp, cp, ASC_PRTBUF_SIZE);
+ ASC_ASSERT(cplen < ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+ /*
+ * Display EEPROM configuration for the board.
+ */
+ cp = boardp->prtbuf;
+ if (ASC_NARROW_BOARD(boardp)) {
+ cplen = asc_prt_asc_board_eeprom(shp, cp, ASC_PRTBUF_SIZE);
+ } else {
+ cplen = asc_prt_adv_board_eeprom(shp, cp, ASC_PRTBUF_SIZE);
+ }
+ ASC_ASSERT(cplen < ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+ /*
+ * Display driver configuration and information for the board.
+ */
+ cp = boardp->prtbuf;
+ cplen = asc_prt_driver_conf(shp, cp, ASC_PRTBUF_SIZE);
+ ASC_ASSERT(cplen < ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+#ifdef ADVANSYS_STATS
+ /*
+ * Display driver statistics for the board.
+ */
+ cp = boardp->prtbuf;
+ cplen = asc_prt_board_stats(shp, cp, ASC_PRTBUF_SIZE);
+ ASC_ASSERT(cplen <= ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+ /*
+ * Display driver statistics for each target.
+ */
+ for (tgt_id = 0; tgt_id <= ADV_MAX_TID; tgt_id++) {
+ cp = boardp->prtbuf;
+ cplen = asc_prt_target_stats(shp, tgt_id, cp, ASC_PRTBUF_SIZE);
+ ASC_ASSERT(cplen <= ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+ }
+#endif /* ADVANSYS_STATS */
+
+ /*
+ * Display Asc Library dynamic configuration information
+ * for the board.
+ */
+ cp = boardp->prtbuf;
+ if (ASC_NARROW_BOARD(boardp)) {
+ cplen = asc_prt_asc_board_info(shp, cp, ASC_PRTBUF_SIZE);
+ } else {
+ cplen = asc_prt_adv_board_info(shp, cp, ASC_PRTBUF_SIZE);
+ }
+ ASC_ASSERT(cplen < ASC_PRTBUF_SIZE);
+ cnt = asc_proc_copy(advoffset, offset, curbuf, leftlen, cp, cplen);
+ totcnt += cnt;
+ leftlen -= cnt;
+ if (leftlen == 0) {
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+ return totcnt;
+ }
+ advoffset += cplen;
+ curbuf += cnt;
+
+ ASC_DBG1(1, "advansys_proc_info: totcnt %d\n", totcnt);
+
+ return totcnt;
+}
+#endif /* CONFIG_PROC_FS */
+
+/*
+ * advansys_detect()
+ *
+ * Detect function for AdvanSys adapters.
+ *
+ * Argument is a pointer to the host driver's scsi_hosts entry.
+ *
+ * Return number of adapters found.
+ *
+ * Note: Because this function is called during system initialization
+ * it must not call SCSI mid-level functions including scsi_malloc()
+ * and scsi_free().
+ */
+int __init
+advansys_detect(struct scsi_host_template *tpnt)
+{
+ static int detect_called = ASC_FALSE;
+ int iop;
+ int bus;
+ struct Scsi_Host *shp = NULL;
+ asc_board_t *boardp = NULL;
+ ASC_DVC_VAR *asc_dvc_varp = NULL;
+ ADV_DVC_VAR *adv_dvc_varp = NULL;
+ adv_sgblk_t *sgp = NULL;
+ int ioport = 0;
+ int share_irq = FALSE;
+ int iolen = 0;
+ struct device *dev = NULL;
+#ifdef CONFIG_PCI
+ int pci_init_search = 0;
+ struct pci_dev *pci_devicep[ASC_NUM_BOARD_SUPPORTED];
+ int pci_card_cnt_max = 0;
+ int pci_card_cnt = 0;
+ struct pci_dev *pci_devp = NULL;
+ int pci_device_id_cnt = 0;
+ unsigned int pci_device_id[ASC_PCI_DEVICE_ID_CNT] = {
+ ASC_PCI_DEVICE_ID_1100,
+ ASC_PCI_DEVICE_ID_1200,
+ ASC_PCI_DEVICE_ID_1300,
+ ASC_PCI_DEVICE_ID_2300,
+ ASC_PCI_DEVICE_ID_2500,
+ ASC_PCI_DEVICE_ID_2700
+ };
+ ADV_PADDR pci_memory_address;
+#endif /* CONFIG_PCI */
+ int warn_code, err_code;
+ int ret;
+
+ if (detect_called == ASC_FALSE) {
+ detect_called = ASC_TRUE;
+ } else {
+ printk("AdvanSys SCSI: advansys_detect() multiple calls ignored\n");
+ return 0;
+ }
+
+ ASC_DBG(1, "advansys_detect: begin\n");
+
+ asc_board_count = 0;
+
+ /*
+ * If I/O port probing has been modified, then verify and
+ * clean-up the 'asc_ioport' list.
+ */
+ if (asc_iopflag == ASC_TRUE) {
+ for (ioport = 0; ioport < ASC_NUM_IOPORT_PROBE; ioport++) {
+ ASC_DBG2(1, "advansys_detect: asc_ioport[%d] 0x%x\n",
+ ioport, asc_ioport[ioport]);
+ if (asc_ioport[ioport] != 0) {
+ for (iop = 0; iop < ASC_IOADR_TABLE_MAX_IX; iop++) {
+ if (_asc_def_iop_base[iop] == asc_ioport[ioport]) {
+ break;
+ }
+ }
+ if (iop == ASC_IOADR_TABLE_MAX_IX) {
+ printk(
+"AdvanSys SCSI: specified I/O Port 0x%X is invalid\n",
+ asc_ioport[ioport]);
+ asc_ioport[ioport] = 0;
+ }
+ }
+ }
+ ioport = 0;
+ }
+
+ for (bus = 0; bus < ASC_NUM_BUS; bus++) {
+
+ ASC_DBG2(1, "advansys_detect: bus search type %d (%s)\n",
+ bus, asc_bus_name[bus]);
+ iop = 0;
+
+ while (asc_board_count < ASC_NUM_BOARD_SUPPORTED) {
+
+ ASC_DBG1(2, "advansys_detect: asc_board_count %d\n",
+ asc_board_count);
+
+ switch (asc_bus[bus]) {
+ case ASC_IS_ISA:
+ case ASC_IS_VL:
+#ifdef CONFIG_ISA
+ if (asc_iopflag == ASC_FALSE) {
+ iop = AscSearchIOPortAddr(iop, asc_bus[bus]);
+ } else {
+ /*
+ * ISA and VL I/O port scanning has either been
+ * eliminated or limited to selected ports on
+ * the LILO command line, /etc/lilo.conf, or
+ * by setting variables when the module was loaded.
+ */
+ ASC_DBG(1, "advansys_detect: I/O port scanning modified\n");
+ ioport_try_again:
+ iop = 0;
+ for (; ioport < ASC_NUM_IOPORT_PROBE; ioport++) {
+ if ((iop = asc_ioport[ioport]) != 0) {
+ break;
+ }
+ }
+ if (iop) {
+ ASC_DBG1(1,
+ "advansys_detect: probing I/O port 0x%x...\n",
+ iop);
+ if (check_region(iop, ASC_IOADR_GAP) != 0) {
+ printk(
+"AdvanSys SCSI: specified I/O Port 0x%X is busy\n", iop);
+ /* Don't try this I/O port twice. */
+ asc_ioport[ioport] = 0;
+ goto ioport_try_again;
+ } else if (AscFindSignature(iop) == ASC_FALSE) {
+ printk(
+"AdvanSys SCSI: specified I/O Port 0x%X has no adapter\n", iop);
+ /* Don't try this I/O port twice. */
+ asc_ioport[ioport] = 0;
+ goto ioport_try_again;
+ } else {
+ /*
+ * If this isn't an ISA board, then it must be
+ * a VL board. If currently looking an ISA
+ * board is being looked for then try for
+ * another ISA board in 'asc_ioport'.
+ */
+ if (asc_bus[bus] == ASC_IS_ISA &&
+ (AscGetChipVersion(iop, ASC_IS_ISA) &
+ ASC_CHIP_VER_ISA_BIT) == 0) {
+ /*
+ * Don't clear 'asc_ioport[ioport]'. Try
+ * this board again for VL. Increment
+ * 'ioport' past this board.
+ */
+ ioport++;
+ goto ioport_try_again;
+ }
+ }
+ /*
+ * This board appears good, don't try the I/O port
+ * again by clearing its value. Increment 'ioport'
+ * for the next iteration.
+ */
+ asc_ioport[ioport++] = 0;
+ }
+ }
+#endif /* CONFIG_ISA */
+ break;
+
+ case ASC_IS_EISA:
+#ifdef CONFIG_ISA
+ iop = AscSearchIOPortAddr(iop, asc_bus[bus]);
+#endif /* CONFIG_ISA */
+ break;
+
+ case ASC_IS_PCI:
+#ifdef CONFIG_PCI
+ if (pci_init_search == 0) {
+ int i, j;
+
+ pci_init_search = 1;
+
+ /* Find all PCI cards. */
+ while (pci_device_id_cnt < ASC_PCI_DEVICE_ID_CNT) {
+ if ((pci_devp = pci_find_device(ASC_PCI_VENDORID,
+ pci_device_id[pci_device_id_cnt], pci_devp)) ==
+ NULL) {
+ pci_device_id_cnt++;
+ } else {
+ if (pci_enable_device(pci_devp) == 0) {
+ pci_devicep[pci_card_cnt_max++] = pci_devp;
+ }
+ }
+ }
+
+ /*
+ * Sort PCI cards in ascending order by PCI Bus, Slot,
+ * and Device Number.
+ */
+ for (i = 0; i < pci_card_cnt_max - 1; i++)
+ {
+ for (j = i + 1; j < pci_card_cnt_max; j++) {
+ if ((pci_devicep[j]->bus->number <
+ pci_devicep[i]->bus->number) ||
+ ((pci_devicep[j]->bus->number ==
+ pci_devicep[i]->bus->number) &&
+ (pci_devicep[j]->devfn <
+ pci_devicep[i]->devfn))) {
+ pci_devp = pci_devicep[i];
+ pci_devicep[i] = pci_devicep[j];
+ pci_devicep[j] = pci_devp;
+ }
+ }
+ }
+
+ pci_card_cnt = 0;
+ } else {
+ pci_card_cnt++;
+ }
+
+ if (pci_card_cnt == pci_card_cnt_max) {
+ iop = 0;
+ } else {
+ pci_devp = pci_devicep[pci_card_cnt];
+
+ ASC_DBG2(2,
+ "advansys_detect: devfn %d, bus number %d\n",
+ pci_devp->devfn, pci_devp->bus->number);
+ iop = pci_resource_start(pci_devp, 0);
+ ASC_DBG2(1,
+ "advansys_detect: vendorID %X, deviceID %X\n",
+ pci_devp->vendor, pci_devp->device);
+ ASC_DBG2(2, "advansys_detect: iop %X, irqLine %d\n",
+ iop, pci_devp->irq);
+ }
+ if(pci_devp)
+ dev = &pci_devp->dev;
+
+#endif /* CONFIG_PCI */
+ break;
+
+ default:
+ ASC_PRINT1("advansys_detect: unknown bus type: %d\n",
+ asc_bus[bus]);
+ break;
+ }
+ ASC_DBG1(1, "advansys_detect: iop 0x%x\n", iop);
+
+ /*
+ * Adapter not found, try next bus type.
+ */
+ if (iop == 0) {
+ break;
+ }
+
+ /*
+ * Adapter found.
+ *
+ * Register the adapter, get its configuration, and
+ * initialize it.
+ */
+ ASC_DBG(2, "advansys_detect: scsi_register()\n");
+ shp = scsi_register(tpnt, sizeof(asc_board_t));
+
+ if (shp == NULL) {
+ continue;
+ }
+
+ scsi_set_device(shp, dev);
+
+ /* Save a pointer to the Scsi_Host of each board found. */
+ asc_host[asc_board_count++] = shp;
+
+ /* Initialize private per board data */
+ boardp = ASC_BOARDP(shp);
+ memset(boardp, 0, sizeof(asc_board_t));
+ boardp->id = asc_board_count - 1;
+
+ /* Initialize spinlock. */
+ spin_lock_init(&boardp->lock);
+
+ /*
+ * Handle both narrow and wide boards.
+ *
+ * If a Wide board was detected, set the board structure
+ * wide board flag. Set-up the board structure based on
+ * the board type.
+ */
+#ifdef CONFIG_PCI
+ if (asc_bus[bus] == ASC_IS_PCI &&
+ (pci_devp->device == ASC_PCI_DEVICE_ID_2300 ||
+ pci_devp->device == ASC_PCI_DEVICE_ID_2500 ||
+ pci_devp->device == ASC_PCI_DEVICE_ID_2700))
+ {
+ boardp->flags |= ASC_IS_WIDE_BOARD;
+ }
+#endif /* CONFIG_PCI */
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ ASC_DBG(1, "advansys_detect: narrow board\n");
+ asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+ asc_dvc_varp->bus_type = asc_bus[bus];
+ asc_dvc_varp->drv_ptr = boardp;
+ asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg;
+ asc_dvc_varp->cfg->overrun_buf = &overrun_buf[0];
+ asc_dvc_varp->iop_base = iop;
+ asc_dvc_varp->isr_callback = asc_isr_callback;
+ } else {
+ ASC_DBG(1, "advansys_detect: wide board\n");
+ adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
+ adv_dvc_varp->drv_ptr = boardp;
+ adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg;
+ adv_dvc_varp->isr_callback = adv_isr_callback;
+ adv_dvc_varp->async_callback = adv_async_callback;
+#ifdef CONFIG_PCI
+ if (pci_devp->device == ASC_PCI_DEVICE_ID_2300)
+ {
+ ASC_DBG(1, "advansys_detect: ASC-3550\n");
+ adv_dvc_varp->chip_type = ADV_CHIP_ASC3550;
+ } else if (pci_devp->device == ASC_PCI_DEVICE_ID_2500)
+ {
+ ASC_DBG(1, "advansys_detect: ASC-38C0800\n");
+ adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800;
+ } else
+ {
+ ASC_DBG(1, "advansys_detect: ASC-38C1600\n");
+ adv_dvc_varp->chip_type = ADV_CHIP_ASC38C1600;
+ }
+#endif /* CONFIG_PCI */
+
+ /*
+ * Map the board's registers into virtual memory for
+ * PCI slave access. Only memory accesses are used to
+ * access the board's registers.
+ *
+ * Note: The PCI register base address is not always
+ * page aligned, but the address passed to ioremap()
+ * must be page aligned. It is guaranteed that the
+ * PCI register base address will not cross a page
+ * boundary.
+ */
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ iolen = ADV_3550_IOLEN;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ iolen = ADV_38C0800_IOLEN;
+ } else
+ {
+ iolen = ADV_38C1600_IOLEN;
+ }
+#ifdef CONFIG_PCI
+ pci_memory_address = pci_resource_start(pci_devp, 1);
+ ASC_DBG1(1, "advansys_detect: pci_memory_address: 0x%lx\n",
+ (ulong) pci_memory_address);
+ if ((boardp->ioremap_addr =
+ ioremap(pci_memory_address & PAGE_MASK,
+ PAGE_SIZE)) == 0) {
+ ASC_PRINT3(
+"advansys_detect: board %d: ioremap(%x, %d) returned NULL\n",
+ boardp->id, pci_memory_address, iolen);
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+ ASC_DBG1(1, "advansys_detect: ioremap_addr: 0x%lx\n",
+ (ulong) boardp->ioremap_addr);
+ adv_dvc_varp->iop_base = (AdvPortAddr)
+ (boardp->ioremap_addr +
+ (pci_memory_address - (pci_memory_address & PAGE_MASK)));
+ ASC_DBG1(1, "advansys_detect: iop_base: 0x%lx\n",
+ adv_dvc_varp->iop_base);
+#endif /* CONFIG_PCI */
+
+ /*
+ * Even though it isn't used to access wide boards, other
+ * than for the debug line below, save I/O Port address so
+ * that it can be reported.
+ */
+ boardp->ioport = iop;
+
+ ASC_DBG2(1,
+"advansys_detect: iopb_chip_id_1 0x%x, iopw_chip_id_0 0x%x\n",
+ (ushort) inp(iop + 1), (ushort) inpw(iop));
+ }
+
+#ifdef CONFIG_PROC_FS
+ /*
+ * Allocate buffer for printing information from
+ * /proc/scsi/advansys/[0...].
+ */
+ if ((boardp->prtbuf =
+ kmalloc(ASC_PRTBUF_SIZE, GFP_ATOMIC)) == NULL) {
+ ASC_PRINT3(
+"advansys_detect: board %d: kmalloc(%d, %d) returned NULL\n",
+ boardp->id, ASC_PRTBUF_SIZE, GFP_ATOMIC);
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+#endif /* CONFIG_PROC_FS */
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ asc_dvc_varp->cfg->dev = dev;
+ /*
+ * Set the board bus type and PCI IRQ before
+ * calling AscInitGetConfig().
+ */
+ switch (asc_dvc_varp->bus_type) {
+#ifdef CONFIG_ISA
+ case ASC_IS_ISA:
+ shp->unchecked_isa_dma = TRUE;
+ share_irq = FALSE;
+ break;
+ case ASC_IS_VL:
+ shp->unchecked_isa_dma = FALSE;
+ share_irq = FALSE;
+ break;
+ case ASC_IS_EISA:
+ shp->unchecked_isa_dma = FALSE;
+ share_irq = TRUE;
+ break;
+#endif /* CONFIG_ISA */
+#ifdef CONFIG_PCI
+ case ASC_IS_PCI:
+ shp->irq = asc_dvc_varp->irq_no = pci_devp->irq;
+ asc_dvc_varp->cfg->pci_slot_info =
+ ASC_PCI_MKID(pci_devp->bus->number,
+ PCI_SLOT(pci_devp->devfn),
+ PCI_FUNC(pci_devp->devfn));
+ shp->unchecked_isa_dma = FALSE;
+ share_irq = TRUE;
+ break;
+#endif /* CONFIG_PCI */
+ default:
+ ASC_PRINT2(
+"advansys_detect: board %d: unknown adapter type: %d\n",
+ boardp->id, asc_dvc_varp->bus_type);
+ shp->unchecked_isa_dma = TRUE;
+ share_irq = FALSE;
+ break;
+ }
+ } else {
+ adv_dvc_varp->cfg->dev = dev;
+ /*
+ * For Wide boards set PCI information before calling
+ * AdvInitGetConfig().
+ */
+#ifdef CONFIG_PCI
+ shp->irq = adv_dvc_varp->irq_no = pci_devp->irq;
+ adv_dvc_varp->cfg->pci_slot_info =
+ ASC_PCI_MKID(pci_devp->bus->number,
+ PCI_SLOT(pci_devp->devfn),
+ PCI_FUNC(pci_devp->devfn));
+ shp->unchecked_isa_dma = FALSE;
+ share_irq = TRUE;
+#endif /* CONFIG_PCI */
+ }
+
+ /*
+ * Read the board configuration.
+ */
+ if (ASC_NARROW_BOARD(boardp)) {
+ /*
+ * NOTE: AscInitGetConfig() may change the board's
+ * bus_type value. The asc_bus[bus] value should no
+ * longer be used. If the bus_type field must be
+ * referenced only use the bit-wise AND operator "&".
+ */
+ ASC_DBG(2, "advansys_detect: AscInitGetConfig()\n");
+ switch(ret = AscInitGetConfig(asc_dvc_varp)) {
+ case 0: /* No error */
+ break;
+ case ASC_WARN_IO_PORT_ROTATE:
+ ASC_PRINT1(
+"AscInitGetConfig: board %d: I/O port address modified\n",
+ boardp->id);
+ break;
+ case ASC_WARN_AUTO_CONFIG:
+ ASC_PRINT1(
+"AscInitGetConfig: board %d: I/O port increment switch enabled\n",
+ boardp->id);
+ break;
+ case ASC_WARN_EEPROM_CHKSUM:
+ ASC_PRINT1(
+"AscInitGetConfig: board %d: EEPROM checksum error\n",
+ boardp->id);
+ break;
+ case ASC_WARN_IRQ_MODIFIED:
+ ASC_PRINT1(
+"AscInitGetConfig: board %d: IRQ modified\n",
+ boardp->id);
+ break;
+ case ASC_WARN_CMD_QNG_CONFLICT:
+ ASC_PRINT1(
+"AscInitGetConfig: board %d: tag queuing enabled w/o disconnects\n",
+ boardp->id);
+ break;
+ default:
+ ASC_PRINT2(
+"AscInitGetConfig: board %d: unknown warning: 0x%x\n",
+ boardp->id, ret);
+ break;
+ }
+ if ((err_code = asc_dvc_varp->err_code) != 0) {
+ ASC_PRINT3(
+"AscInitGetConfig: board %d error: init_state 0x%x, err_code 0x%x\n",
+ boardp->id, asc_dvc_varp->init_state,
+ asc_dvc_varp->err_code);
+ }
+ } else {
+ ASC_DBG(2, "advansys_detect: AdvInitGetConfig()\n");
+ if ((ret = AdvInitGetConfig(adv_dvc_varp)) != 0) {
+ ASC_PRINT2("AdvInitGetConfig: board %d: warning: 0x%x\n",
+ boardp->id, ret);
+ }
+ if ((err_code = adv_dvc_varp->err_code) != 0) {
+ ASC_PRINT2(
+"AdvInitGetConfig: board %d error: err_code 0x%x\n",
+ boardp->id, adv_dvc_varp->err_code);
+ }
+ }
+
+ if (err_code != 0) {
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+
+ /*
+ * Save the EEPROM configuration so that it can be displayed
+ * from /proc/scsi/advansys/[0...].
+ */
+ if (ASC_NARROW_BOARD(boardp)) {
+
+ ASCEEP_CONFIG *ep;
+
+ /*
+ * Set the adapter's target id bit in the 'init_tidmask' field.
+ */
+ boardp->init_tidmask |=
+ ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id);
+
+ /*
+ * Save EEPROM settings for the board.
+ */
+ ep = &boardp->eep_config.asc_eep;
+
+ ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable;
+ ep->disc_enable = asc_dvc_varp->cfg->disc_enable;
+ ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled;
+ ASC_EEP_SET_DMA_SPD(ep, asc_dvc_varp->cfg->isa_dma_speed);
+ ep->start_motor = asc_dvc_varp->start_motor;
+ ep->cntl = asc_dvc_varp->dvc_cntl;
+ ep->no_scam = asc_dvc_varp->no_scam;
+ ep->max_total_qng = asc_dvc_varp->max_total_qng;
+ ASC_EEP_SET_CHIP_ID(ep, asc_dvc_varp->cfg->chip_scsi_id);
+ /* 'max_tag_qng' is set to the same value for every device. */
+ ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0];
+ ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0];
+ ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1];
+ ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2];
+ ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3];
+ ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4];
+ ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5];
+
+ /*
+ * Modify board configuration.
+ */
+ ASC_DBG(2, "advansys_detect: AscInitSetConfig()\n");
+ switch (ret = AscInitSetConfig(asc_dvc_varp)) {
+ case 0: /* No error. */
+ break;
+ case ASC_WARN_IO_PORT_ROTATE:
+ ASC_PRINT1(
+"AscInitSetConfig: board %d: I/O port address modified\n",
+ boardp->id);
+ break;
+ case ASC_WARN_AUTO_CONFIG:
+ ASC_PRINT1(
+"AscInitSetConfig: board %d: I/O port increment switch enabled\n",
+ boardp->id);
+ break;
+ case ASC_WARN_EEPROM_CHKSUM:
+ ASC_PRINT1(
+"AscInitSetConfig: board %d: EEPROM checksum error\n",
+ boardp->id);
+ break;
+ case ASC_WARN_IRQ_MODIFIED:
+ ASC_PRINT1(
+"AscInitSetConfig: board %d: IRQ modified\n",
+ boardp->id);
+ break;
+ case ASC_WARN_CMD_QNG_CONFLICT:
+ ASC_PRINT1(
+"AscInitSetConfig: board %d: tag queuing w/o disconnects\n",
+ boardp->id);
+ break;
+ default:
+ ASC_PRINT2(
+"AscInitSetConfig: board %d: unknown warning: 0x%x\n",
+ boardp->id, ret);
+ break;
+ }
+ if (asc_dvc_varp->err_code != 0) {
+ ASC_PRINT3(
+"AscInitSetConfig: board %d error: init_state 0x%x, err_code 0x%x\n",
+ boardp->id, asc_dvc_varp->init_state,
+ asc_dvc_varp->err_code);
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+
+ /*
+ * Finish initializing the 'Scsi_Host' structure.
+ */
+ /* AscInitSetConfig() will set the IRQ for non-PCI boards. */
+ if ((asc_dvc_varp->bus_type & ASC_IS_PCI) == 0) {
+ shp->irq = asc_dvc_varp->irq_no;
+ }
+ } else {
+ ADVEEP_3550_CONFIG *ep_3550;
+ ADVEEP_38C0800_CONFIG *ep_38C0800;
+ ADVEEP_38C1600_CONFIG *ep_38C1600;
+
+ /*
+ * Save Wide EEP Configuration Information.
+ */
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ ep_3550 = &boardp->eep_config.adv_3550_eep;
+
+ ep_3550->adapter_scsi_id = adv_dvc_varp->chip_scsi_id;
+ ep_3550->max_host_qng = adv_dvc_varp->max_host_qng;
+ ep_3550->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
+ ep_3550->termination = adv_dvc_varp->cfg->termination;
+ ep_3550->disc_enable = adv_dvc_varp->cfg->disc_enable;
+ ep_3550->bios_ctrl = adv_dvc_varp->bios_ctrl;
+ ep_3550->wdtr_able = adv_dvc_varp->wdtr_able;
+ ep_3550->sdtr_able = adv_dvc_varp->sdtr_able;
+ ep_3550->ultra_able = adv_dvc_varp->ultra_able;
+ ep_3550->tagqng_able = adv_dvc_varp->tagqng_able;
+ ep_3550->start_motor = adv_dvc_varp->start_motor;
+ ep_3550->scsi_reset_delay = adv_dvc_varp->scsi_reset_wait;
+ ep_3550->serial_number_word1 =
+ adv_dvc_varp->cfg->serial1;
+ ep_3550->serial_number_word2 =
+ adv_dvc_varp->cfg->serial2;
+ ep_3550->serial_number_word3 =
+ adv_dvc_varp->cfg->serial3;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ ep_38C0800 = &boardp->eep_config.adv_38C0800_eep;
+
+ ep_38C0800->adapter_scsi_id = adv_dvc_varp->chip_scsi_id;
+ ep_38C0800->max_host_qng = adv_dvc_varp->max_host_qng;
+ ep_38C0800->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
+ ep_38C0800->termination_lvd =
+ adv_dvc_varp->cfg->termination;
+ ep_38C0800->disc_enable = adv_dvc_varp->cfg->disc_enable;
+ ep_38C0800->bios_ctrl = adv_dvc_varp->bios_ctrl;
+ ep_38C0800->wdtr_able = adv_dvc_varp->wdtr_able;
+ ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able;
+ ep_38C0800->sdtr_speed1 = adv_dvc_varp->sdtr_speed1;
+ ep_38C0800->sdtr_speed2 = adv_dvc_varp->sdtr_speed2;
+ ep_38C0800->sdtr_speed3 = adv_dvc_varp->sdtr_speed3;
+ ep_38C0800->sdtr_speed4 = adv_dvc_varp->sdtr_speed4;
+ ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able;
+ ep_38C0800->start_motor = adv_dvc_varp->start_motor;
+ ep_38C0800->scsi_reset_delay =
+ adv_dvc_varp->scsi_reset_wait;
+ ep_38C0800->serial_number_word1 =
+ adv_dvc_varp->cfg->serial1;
+ ep_38C0800->serial_number_word2 =
+ adv_dvc_varp->cfg->serial2;
+ ep_38C0800->serial_number_word3 =
+ adv_dvc_varp->cfg->serial3;
+ } else
+ {
+ ep_38C1600 = &boardp->eep_config.adv_38C1600_eep;
+
+ ep_38C1600->adapter_scsi_id = adv_dvc_varp->chip_scsi_id;
+ ep_38C1600->max_host_qng = adv_dvc_varp->max_host_qng;
+ ep_38C1600->max_dvc_qng = adv_dvc_varp->max_dvc_qng;
+ ep_38C1600->termination_lvd =
+ adv_dvc_varp->cfg->termination;
+ ep_38C1600->disc_enable = adv_dvc_varp->cfg->disc_enable;
+ ep_38C1600->bios_ctrl = adv_dvc_varp->bios_ctrl;
+ ep_38C1600->wdtr_able = adv_dvc_varp->wdtr_able;
+ ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able;
+ ep_38C1600->sdtr_speed1 = adv_dvc_varp->sdtr_speed1;
+ ep_38C1600->sdtr_speed2 = adv_dvc_varp->sdtr_speed2;
+ ep_38C1600->sdtr_speed3 = adv_dvc_varp->sdtr_speed3;
+ ep_38C1600->sdtr_speed4 = adv_dvc_varp->sdtr_speed4;
+ ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able;
+ ep_38C1600->start_motor = adv_dvc_varp->start_motor;
+ ep_38C1600->scsi_reset_delay =
+ adv_dvc_varp->scsi_reset_wait;
+ ep_38C1600->serial_number_word1 =
+ adv_dvc_varp->cfg->serial1;
+ ep_38C1600->serial_number_word2 =
+ adv_dvc_varp->cfg->serial2;
+ ep_38C1600->serial_number_word3 =
+ adv_dvc_varp->cfg->serial3;
+ }
+
+ /*
+ * Set the adapter's target id bit in the 'init_tidmask' field.
+ */
+ boardp->init_tidmask |=
+ ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id);
+
+ /*
+ * Finish initializing the 'Scsi_Host' structure.
+ */
+ shp->irq = adv_dvc_varp->irq_no;
+ }
+
+ /*
+ * Channels are numbered beginning with 0. For AdvanSys one host
+ * structure supports one channel. Multi-channel boards have a
+ * separate host structure for each channel.
+ */
+ shp->max_channel = 0;
+ if (ASC_NARROW_BOARD(boardp)) {
+ shp->max_id = ASC_MAX_TID + 1;
+ shp->max_lun = ASC_MAX_LUN + 1;
+
+ shp->io_port = asc_dvc_varp->iop_base;
+ boardp->asc_n_io_port = ASC_IOADR_GAP;
+ shp->this_id = asc_dvc_varp->cfg->chip_scsi_id;
+
+ /* Set maximum number of queues the adapter can handle. */
+ shp->can_queue = asc_dvc_varp->max_total_qng;
+ } else {
+ shp->max_id = ADV_MAX_TID + 1;
+ shp->max_lun = ADV_MAX_LUN + 1;
+
+ /*
+ * Save the I/O Port address and length even though
+ * I/O ports are not used to access Wide boards.
+ * Instead the Wide boards are accessed with
+ * PCI Memory Mapped I/O.
+ */
+ shp->io_port = iop;
+ boardp->asc_n_io_port = iolen;
+
+ shp->this_id = adv_dvc_varp->chip_scsi_id;
+
+ /* Set maximum number of queues the adapter can handle. */
+ shp->can_queue = adv_dvc_varp->max_host_qng;
+ }
+
+ /*
+ * 'n_io_port' currently is one byte.
+ *
+ * Set a value to 'n_io_port', but never referenced it because
+ * it may be truncated.
+ */
+ shp->n_io_port = boardp->asc_n_io_port <= 255 ?
+ boardp->asc_n_io_port : 255;
+
+ /*
+ * Following v1.3.89, 'cmd_per_lun' is no longer needed
+ * and should be set to zero.
+ *
+ * But because of a bug introduced in v1.3.89 if the driver is
+ * compiled as a module and 'cmd_per_lun' is zero, the Mid-Level
+ * SCSI function 'allocate_device' will panic. To allow the driver
+ * to work as a module in these kernels set 'cmd_per_lun' to 1.
+ *
+ * Note: This is wrong. cmd_per_lun should be set to the depth
+ * you want on untagged devices always.
+#ifdef MODULE
+ */
+ shp->cmd_per_lun = 1;
+/* #else
+ shp->cmd_per_lun = 0;
+#endif */
+
+ /*
+ * Set the maximum number of scatter-gather elements the
+ * adapter can handle.
+ */
+ if (ASC_NARROW_BOARD(boardp)) {
+ /*
+ * Allow two commands with 'sg_tablesize' scatter-gather
+ * elements to be executed simultaneously. This value is
+ * the theoretical hardware limit. It may be decreased
+ * below.
+ */
+ shp->sg_tablesize =
+ (((asc_dvc_varp->max_total_qng - 2) / 2) *
+ ASC_SG_LIST_PER_Q) + 1;
+ } else {
+ shp->sg_tablesize = ADV_MAX_SG_LIST;
+ }
+
+ /*
+ * The value of 'sg_tablesize' can not exceed the SCSI
+ * mid-level driver definition of SG_ALL. SG_ALL also
+ * must not be exceeded, because it is used to define the
+ * size of the scatter-gather table in 'struct asc_sg_head'.
+ */
+ if (shp->sg_tablesize > SG_ALL) {
+ shp->sg_tablesize = SG_ALL;
+ }
+
+ ASC_DBG1(1, "advansys_detect: sg_tablesize: %d\n",
+ shp->sg_tablesize);
+
+ /* BIOS start address. */
+ if (ASC_NARROW_BOARD(boardp)) {
+ shp->base =
+ ((ulong) AscGetChipBiosAddress(
+ asc_dvc_varp->iop_base,
+ asc_dvc_varp->bus_type));
+ } else {
+ /*
+ * Fill-in BIOS board variables. The Wide BIOS saves
+ * information in LRAM that is used by the driver.
+ */
+ AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_SIGNATURE,
+ boardp->bios_signature);
+ AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_VERSION,
+ boardp->bios_version);
+ AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_CODESEG,
+ boardp->bios_codeseg);
+ AdvReadWordLram(adv_dvc_varp->iop_base, BIOS_CODELEN,
+ boardp->bios_codelen);
+
+ ASC_DBG2(1,
+ "advansys_detect: bios_signature 0x%x, bios_version 0x%x\n",
+ boardp->bios_signature, boardp->bios_version);
+
+ ASC_DBG2(1,
+ "advansys_detect: bios_codeseg 0x%x, bios_codelen 0x%x\n",
+ boardp->bios_codeseg, boardp->bios_codelen);
+
+ /*
+ * If the BIOS saved a valid signature, then fill in
+ * the BIOS code segment base address.
+ */
+ if (boardp->bios_signature == 0x55AA) {
+ /*
+ * Convert x86 realmode code segment to a linear
+ * address by shifting left 4.
+ */
+ shp->base = ((ulong) boardp->bios_codeseg << 4);
+ } else {
+ shp->base = 0;
+ }
+ }
+
+ /*
+ * Register Board Resources - I/O Port, DMA, IRQ
+ */
+
+ /*
+ * Register I/O port range.
+ *
+ * For Wide boards the I/O ports are not used to access
+ * the board, but request the region anyway.
+ *
+ * 'shp->n_io_port' is not referenced, because it may be truncated.
+ */
+ ASC_DBG2(2,
+ "advansys_detect: request_region port 0x%lx, len 0x%x\n",
+ (ulong) shp->io_port, boardp->asc_n_io_port);
+ if (request_region(shp->io_port, boardp->asc_n_io_port,
+ "advansys") == NULL) {
+ ASC_PRINT3(
+"advansys_detect: board %d: request_region() failed, port 0x%lx, len 0x%x\n",
+ boardp->id, (ulong) shp->io_port, boardp->asc_n_io_port);
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+
+ /* Register DMA Channel for Narrow boards. */
+ shp->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */
+#ifdef CONFIG_ISA
+ if (ASC_NARROW_BOARD(boardp)) {
+ /* Register DMA channel for ISA bus. */
+ if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
+ shp->dma_channel = asc_dvc_varp->cfg->isa_dma_channel;
+ if ((ret =
+ request_dma(shp->dma_channel, "advansys")) != 0) {
+ ASC_PRINT3(
+"advansys_detect: board %d: request_dma() %d failed %d\n",
+ boardp->id, shp->dma_channel, ret);
+ release_region(shp->io_port, boardp->asc_n_io_port);
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+ AscEnableIsaDma(shp->dma_channel);
+ }
+ }
+#endif /* CONFIG_ISA */
+
+ /* Register IRQ Number. */
+ ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq);
+ /*
+ * If request_irq() fails with the SA_INTERRUPT flag set,
+ * then try again without the SA_INTERRUPT flag set. This
+ * allows IRQ sharing to work even with other drivers that
+ * do not set the SA_INTERRUPT flag.
+ *
+ * If SA_INTERRUPT is not set, then interrupts are enabled
+ * before the driver interrupt function is called.
+ */
+ if (((ret = request_irq(shp->irq, advansys_interrupt,
+ SA_INTERRUPT | (share_irq == TRUE ? SA_SHIRQ : 0),
+ "advansys", boardp)) != 0) &&
+ ((ret = request_irq(shp->irq, advansys_interrupt,
+ (share_irq == TRUE ? SA_SHIRQ : 0),
+ "advansys", boardp)) != 0))
+ {
+ if (ret == -EBUSY) {
+ ASC_PRINT2(
+"advansys_detect: board %d: request_irq(): IRQ 0x%x already in use.\n",
+ boardp->id, shp->irq);
+ } else if (ret == -EINVAL) {
+ ASC_PRINT2(
+"advansys_detect: board %d: request_irq(): IRQ 0x%x not valid.\n",
+ boardp->id, shp->irq);
+ } else {
+ ASC_PRINT3(
+"advansys_detect: board %d: request_irq(): IRQ 0x%x failed with %d\n",
+ boardp->id, shp->irq, ret);
+ }
+ release_region(shp->io_port, boardp->asc_n_io_port);
+ iounmap(boardp->ioremap_addr);
+ if (shp->dma_channel != NO_ISA_DMA) {
+ free_dma(shp->dma_channel);
+ }
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+
+ /*
+ * Initialize board RISC chip and enable interrupts.
+ */
+ if (ASC_NARROW_BOARD(boardp)) {
+ ASC_DBG(2, "advansys_detect: AscInitAsc1000Driver()\n");
+ warn_code = AscInitAsc1000Driver(asc_dvc_varp);
+ err_code = asc_dvc_varp->err_code;
+
+ if (warn_code || err_code) {
+ ASC_PRINT4(
+"advansys_detect: board %d error: init_state 0x%x, warn 0x%x, error 0x%x\n",
+ boardp->id, asc_dvc_varp->init_state,
+ warn_code, err_code);
+ }
+ } else {
+ ADV_CARR_T *carrp;
+ int req_cnt = 0;
+ adv_req_t *reqp = NULL;
+ int sg_cnt = 0;
+
+ /*
+ * Allocate buffer carrier structures. The total size
+ * is about 4 KB, so allocate all at once.
+ */
+ carrp =
+ (ADV_CARR_T *) kmalloc(ADV_CARRIER_BUFSIZE, GFP_ATOMIC);
+ ASC_DBG1(1, "advansys_detect: carrp 0x%lx\n", (ulong) carrp);
+
+ if (carrp == NULL) {
+ goto kmalloc_error;
+ }
+
+ /*
+ * Allocate up to 'max_host_qng' request structures for
+ * the Wide board. The total size is about 16 KB, so
+ * allocate all at once. If the allocation fails decrement
+ * and try again.
+ */
+ for (req_cnt = adv_dvc_varp->max_host_qng;
+ req_cnt > 0; req_cnt--) {
+
+ reqp = (adv_req_t *)
+ kmalloc(sizeof(adv_req_t) * req_cnt, GFP_ATOMIC);
+
+ ASC_DBG3(1,
+ "advansys_detect: reqp 0x%lx, req_cnt %d, bytes %lu\n",
+ (ulong) reqp, req_cnt,
+ (ulong) sizeof(adv_req_t) * req_cnt);
+
+ if (reqp != NULL) {
+ break;
+ }
+ }
+ if (reqp == NULL)
+ {
+ goto kmalloc_error;
+ }
+
+ /*
+ * Allocate up to ADV_TOT_SG_BLOCK request structures for
+ * the Wide board. Each structure is about 136 bytes.
+ */
+ boardp->adv_sgblkp = NULL;
+ for (sg_cnt = 0; sg_cnt < ADV_TOT_SG_BLOCK; sg_cnt++) {
+
+ sgp = (adv_sgblk_t *)
+ kmalloc(sizeof(adv_sgblk_t), GFP_ATOMIC);
+
+ if (sgp == NULL) {
+ break;
+ }
+
+ sgp->next_sgblkp = boardp->adv_sgblkp;
+ boardp->adv_sgblkp = sgp;
+
+ }
+ ASC_DBG3(1,
+ "advansys_detect: sg_cnt %d * %u = %u bytes\n",
+ sg_cnt, sizeof(adv_sgblk_t),
+ (unsigned) (sizeof(adv_sgblk_t) * sg_cnt));
+
+ /*
+ * If no request structures or scatter-gather structures could
+ * be allocated, then return an error. Otherwise continue with
+ * initialization.
+ */
+ kmalloc_error:
+ if (carrp == NULL)
+ {
+ ASC_PRINT1(
+"advansys_detect: board %d error: failed to kmalloc() carrier buffer.\n",
+ boardp->id);
+ err_code = ADV_ERROR;
+ } else if (reqp == NULL) {
+ kfree(carrp);
+ ASC_PRINT1(
+"advansys_detect: board %d error: failed to kmalloc() adv_req_t buffer.\n",
+ boardp->id);
+ err_code = ADV_ERROR;
+ } else if (boardp->adv_sgblkp == NULL) {
+ kfree(carrp);
+ kfree(reqp);
+ ASC_PRINT1(
+"advansys_detect: board %d error: failed to kmalloc() adv_sgblk_t buffers.\n",
+ boardp->id);
+ err_code = ADV_ERROR;
+ } else {
+
+ /* Save carrier buffer pointer. */
+ boardp->orig_carrp = carrp;
+
+ /*
+ * Save original pointer for kfree() in case the
+ * driver is built as a module and can be unloaded.
+ */
+ boardp->orig_reqp = reqp;
+
+ adv_dvc_varp->carrier_buf = carrp;
+
+ /*
+ * Point 'adv_reqp' to the request structures and
+ * link them together.
+ */
+ req_cnt--;
+ reqp[req_cnt].next_reqp = NULL;
+ for (; req_cnt > 0; req_cnt--) {
+ reqp[req_cnt - 1].next_reqp = &reqp[req_cnt];
+ }
+ boardp->adv_reqp = &reqp[0];
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ ASC_DBG(2,
+ "advansys_detect: AdvInitAsc3550Driver()\n");
+ warn_code = AdvInitAsc3550Driver(adv_dvc_varp);
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) {
+ ASC_DBG(2,
+ "advansys_detect: AdvInitAsc38C0800Driver()\n");
+ warn_code = AdvInitAsc38C0800Driver(adv_dvc_varp);
+ } else {
+ ASC_DBG(2,
+ "advansys_detect: AdvInitAsc38C1600Driver()\n");
+ warn_code = AdvInitAsc38C1600Driver(adv_dvc_varp);
+ }
+ err_code = adv_dvc_varp->err_code;
+
+ if (warn_code || err_code) {
+ ASC_PRINT3(
+"advansys_detect: board %d error: warn 0x%x, error 0x%x\n",
+ boardp->id, warn_code, err_code);
+ }
+ }
+ }
+
+ if (err_code != 0) {
+ release_region(shp->io_port, boardp->asc_n_io_port);
+ if (ASC_WIDE_BOARD(boardp)) {
+ iounmap(boardp->ioremap_addr);
+ if (boardp->orig_carrp) {
+ kfree(boardp->orig_carrp);
+ boardp->orig_carrp = NULL;
+ }
+ if (boardp->orig_reqp) {
+ kfree(boardp->orig_reqp);
+ boardp->orig_reqp = boardp->adv_reqp = NULL;
+ }
+ while ((sgp = boardp->adv_sgblkp) != NULL)
+ {
+ boardp->adv_sgblkp = sgp->next_sgblkp;
+ kfree(sgp);
+ }
+ }
+ if (shp->dma_channel != NO_ISA_DMA) {
+ free_dma(shp->dma_channel);
+ }
+#ifdef CONFIG_PROC_FS
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ free_irq(shp->irq, boardp);
+ scsi_unregister(shp);
+ asc_board_count--;
+ continue;
+ }
+ ASC_DBG_PRT_SCSI_HOST(2, shp);
+ }
+ }
+
+ ASC_DBG1(1, "advansys_detect: done: asc_board_count %d\n", asc_board_count);
+ return asc_board_count;
+}
+
+/*
+ * advansys_release()
+ *
+ * Release resources allocated for a single AdvanSys adapter.
+ */
+int
+advansys_release(struct Scsi_Host *shp)
+{
+ asc_board_t *boardp;
+
+ ASC_DBG(1, "advansys_release: begin\n");
+ boardp = ASC_BOARDP(shp);
+ free_irq(shp->irq, boardp);
+ if (shp->dma_channel != NO_ISA_DMA) {
+ ASC_DBG(1, "advansys_release: free_dma()\n");
+ free_dma(shp->dma_channel);
+ }
+ release_region(shp->io_port, boardp->asc_n_io_port);
+ if (ASC_WIDE_BOARD(boardp)) {
+ adv_sgblk_t *sgp = NULL;
+
+ iounmap(boardp->ioremap_addr);
+ if (boardp->orig_carrp) {
+ kfree(boardp->orig_carrp);
+ boardp->orig_carrp = NULL;
+ }
+ if (boardp->orig_reqp) {
+ kfree(boardp->orig_reqp);
+ boardp->orig_reqp = boardp->adv_reqp = NULL;
+ }
+ while ((sgp = boardp->adv_sgblkp) != NULL)
+ {
+ boardp->adv_sgblkp = sgp->next_sgblkp;
+ kfree(sgp);
+ }
+ }
+#ifdef CONFIG_PROC_FS
+ ASC_ASSERT(boardp->prtbuf != NULL);
+ kfree(boardp->prtbuf);
+#endif /* CONFIG_PROC_FS */
+ scsi_unregister(shp);
+ ASC_DBG(1, "advansys_release: end\n");
+ return 0;
+}
+
+/*
+ * advansys_info()
+ *
+ * Return suitable for printing on the console with the argument
+ * adapter's configuration information.
+ *
+ * Note: The information line should not exceed ASC_INFO_SIZE bytes,
+ * otherwise the static 'info' array will be overrun.
+ */
+const char *
+advansys_info(struct Scsi_Host *shp)
+{
+ static char info[ASC_INFO_SIZE];
+ asc_board_t *boardp;
+ ASC_DVC_VAR *asc_dvc_varp;
+ ADV_DVC_VAR *adv_dvc_varp;
+ char *busname;
+ int iolen;
+ char *widename = NULL;
+
+ boardp = ASC_BOARDP(shp);
+ if (ASC_NARROW_BOARD(boardp)) {
+ asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+ ASC_DBG(1, "advansys_info: begin\n");
+ if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
+ if ((asc_dvc_varp->bus_type & ASC_IS_ISAPNP) == ASC_IS_ISAPNP) {
+ busname = "ISA PnP";
+ } else {
+ busname = "ISA";
+ }
+ /* Don't reference 'shp->n_io_port'; It may be truncated. */
+ sprintf(info,
+"AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X, DMA 0x%X",
+ ASC_VERSION, busname,
+ (ulong) shp->io_port,
+ (ulong) shp->io_port + boardp->asc_n_io_port - 1,
+ shp->irq, shp->dma_channel);
+ } else {
+ if (asc_dvc_varp->bus_type & ASC_IS_VL) {
+ busname = "VL";
+ } else if (asc_dvc_varp->bus_type & ASC_IS_EISA) {
+ busname = "EISA";
+ } else if (asc_dvc_varp->bus_type & ASC_IS_PCI) {
+ if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA)
+ == ASC_IS_PCI_ULTRA) {
+ busname = "PCI Ultra";
+ } else {
+ busname = "PCI";
+ }
+ } else {
+ busname = "?";
+ ASC_PRINT2( "advansys_info: board %d: unknown bus type %d\n",
+ boardp->id, asc_dvc_varp->bus_type);
+ }
+ /* Don't reference 'shp->n_io_port'; It may be truncated. */
+ sprintf(info,
+ "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X",
+ ASC_VERSION, busname,
+ (ulong) shp->io_port,
+ (ulong) shp->io_port + boardp->asc_n_io_port - 1,
+ shp->irq);
+ }
+ } else {
+ /*
+ * Wide Adapter Information
+ *
+ * Memory-mapped I/O is used instead of I/O space to access
+ * the adapter, but display the I/O Port range. The Memory
+ * I/O address is displayed through the driver /proc file.
+ */
+ adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ iolen = ADV_3550_IOLEN;
+ widename = "Ultra-Wide";
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ iolen = ADV_38C0800_IOLEN;
+ widename = "Ultra2-Wide";
+ } else
+ {
+ iolen = ADV_38C1600_IOLEN;
+ widename = "Ultra3-Wide";
+ }
+ sprintf(info, "AdvanSys SCSI %s: PCI %s: PCIMEM 0x%lX-0x%lX, IRQ 0x%X",
+ ASC_VERSION,
+ widename,
+ (ulong) adv_dvc_varp->iop_base,
+ (ulong) adv_dvc_varp->iop_base + iolen - 1,
+ shp->irq);
+ }
+ ASC_ASSERT(strlen(info) < ASC_INFO_SIZE);
+ ASC_DBG(1, "advansys_info: end\n");
+ return info;
+}
+
+/*
+ * advansys_queuecommand() - interrupt-driven I/O entrypoint.
+ *
+ * This function always returns 0. Command return status is saved
+ * in the 'scp' result field.
+ */
+int
+advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *shp;
+ asc_board_t *boardp;
+ ulong flags;
+ struct scsi_cmnd *done_scp;
+
+ shp = scp->device->host;
+ boardp = ASC_BOARDP(shp);
+ ASC_STATS(shp, queuecommand);
+
+ /* host_lock taken by mid-level prior to call but need to protect */
+ /* against own ISR */
+ spin_lock_irqsave(&boardp->lock, flags);
+
+ /*
+ * Block new commands while handling a reset or abort request.
+ */
+ if (boardp->flags & ASC_HOST_IN_RESET) {
+ ASC_DBG1(1,
+ "advansys_queuecommand: scp 0x%lx blocked for reset request\n",
+ (ulong) scp);
+ scp->result = HOST_BYTE(DID_RESET);
+
+ /*
+ * Add blocked requests to the board's 'done' queue. The queued
+ * requests will be completed at the end of the abort or reset
+ * handling.
+ */
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ spin_unlock_irqrestore(&boardp->lock, flags);
+ return 0;
+ }
+
+ /*
+ * Attempt to execute any waiting commands for the board.
+ */
+ if (!ASC_QUEUE_EMPTY(&boardp->waiting)) {
+ ASC_DBG(1,
+ "advansys_queuecommand: before asc_execute_queue() waiting\n");
+ asc_execute_queue(&boardp->waiting);
+ }
+
+ /*
+ * Save the function pointer to Linux mid-level 'done' function
+ * and attempt to execute the command.
+ *
+ * If ASC_NOERROR is returned the request has been added to the
+ * board's 'active' queue and will be completed by the interrupt
+ * handler.
+ *
+ * If ASC_BUSY is returned add the request to the board's per
+ * target waiting list. This is the first time the request has
+ * been tried. Add it to the back of the waiting list. It will be
+ * retried later.
+ *
+ * If an error occurred, the request will have been placed on the
+ * board's 'done' queue and must be completed before returning.
+ */
+ scp->scsi_done = done;
+ switch (asc_execute_scsi_cmnd(scp)) {
+ case ASC_NOERROR:
+ break;
+ case ASC_BUSY:
+ asc_enqueue(&boardp->waiting, scp, ASC_BACK);
+ break;
+ case ASC_ERROR:
+ default:
+ done_scp = asc_dequeue_list(&boardp->done, NULL, ASC_TID_ALL);
+ /* Interrupts could be enabled here. */
+ asc_scsi_done_list(done_scp);
+ break;
+ }
+ spin_unlock_irqrestore(&boardp->lock, flags);
+
+ return 0;
+}
+
+/*
+ * advansys_reset()
+ *
+ * Reset the bus associated with the command 'scp'.
+ *
+ * This function runs its own thread. Interrupts must be blocked but
+ * sleeping is allowed and no locking other than for host structures is
+ * required. Returns SUCCESS or FAILED.
+ */
+int
+advansys_reset(struct scsi_cmnd *scp)
+{
+ struct Scsi_Host *shp;
+ asc_board_t *boardp;
+ ASC_DVC_VAR *asc_dvc_varp;
+ ADV_DVC_VAR *adv_dvc_varp;
+ ulong flags;
+ struct scsi_cmnd *done_scp = NULL, *last_scp = NULL;
+ struct scsi_cmnd *tscp, *new_last_scp;
+ int status;
+ int ret = SUCCESS;
+
+ ASC_DBG1(1, "advansys_reset: 0x%lx\n", (ulong) scp);
+
+#ifdef ADVANSYS_STATS
+ if (scp->device->host != NULL) {
+ ASC_STATS(scp->device->host, reset);
+ }
+#endif /* ADVANSYS_STATS */
+
+ if ((shp = scp->device->host) == NULL) {
+ scp->result = HOST_BYTE(DID_ERROR);
+ return FAILED;
+ }
+
+ boardp = ASC_BOARDP(shp);
+
+ ASC_PRINT1("advansys_reset: board %d: SCSI bus reset started...\n",
+ boardp->id);
+ /*
+ * Check for re-entrancy.
+ */
+ spin_lock_irqsave(&boardp->lock, flags);
+ if (boardp->flags & ASC_HOST_IN_RESET) {
+ spin_unlock_irqrestore(&boardp->lock, flags);
+ return FAILED;
+ }
+ boardp->flags |= ASC_HOST_IN_RESET;
+ spin_unlock_irqrestore(&boardp->lock, flags);
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ /*
+ * Narrow Board
+ */
+ asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+
+ /*
+ * Reset the chip and SCSI bus.
+ */
+ ASC_DBG(1, "advansys_reset: before AscInitAsc1000Driver()\n");
+ status = AscInitAsc1000Driver(asc_dvc_varp);
+
+ /* Refer to ASC_IERR_* defintions for meaning of 'err_code'. */
+ if (asc_dvc_varp->err_code) {
+ ASC_PRINT2(
+ "advansys_reset: board %d: SCSI bus reset error: 0x%x\n",
+ boardp->id, asc_dvc_varp->err_code);
+ ret = FAILED;
+ } else if (status) {
+ ASC_PRINT2(
+ "advansys_reset: board %d: SCSI bus reset warning: 0x%x\n",
+ boardp->id, status);
+ } else {
+ ASC_PRINT1(
+ "advansys_reset: board %d: SCSI bus reset successful.\n",
+ boardp->id);
+ }
+
+ ASC_DBG(1, "advansys_reset: after AscInitAsc1000Driver()\n");
+ spin_lock_irqsave(&boardp->lock, flags);
+
+ } else {
+ /*
+ * Wide Board
+ *
+ * If the suggest reset bus flags are set, then reset the bus.
+ * Otherwise only reset the device.
+ */
+ adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
+
+ /*
+ * Reset the target's SCSI bus.
+ */
+ ASC_DBG(1, "advansys_reset: before AdvResetChipAndSB()\n");
+ switch (AdvResetChipAndSB(adv_dvc_varp)) {
+ case ASC_TRUE:
+ ASC_PRINT1("advansys_reset: board %d: SCSI bus reset successful.\n",
+ boardp->id);
+ break;
+ case ASC_FALSE:
+ default:
+ ASC_PRINT1("advansys_reset: board %d: SCSI bus reset error.\n",
+ boardp->id);
+ ret = FAILED;
+ break;
+ }
+ spin_lock_irqsave(&boardp->lock, flags);
+ (void) AdvISR(adv_dvc_varp);
+ }
+ /* Board lock is held. */
+
+ /*
+ * Dequeue all board 'done' requests. A pointer to the last request
+ * is returned in 'last_scp'.
+ */
+ done_scp = asc_dequeue_list(&boardp->done, &last_scp, ASC_TID_ALL);
+
+ /*
+ * Dequeue all board 'active' requests for all devices and set
+ * the request status to DID_RESET. A pointer to the last request
+ * is returned in 'last_scp'.
+ */
+ if (done_scp == NULL) {
+ done_scp = asc_dequeue_list(&boardp->active, &last_scp, ASC_TID_ALL);
+ for (tscp = done_scp; tscp; tscp = REQPNEXT(tscp)) {
+ tscp->result = HOST_BYTE(DID_RESET);
+ }
+ } else {
+ /* Append to 'done_scp' at the end with 'last_scp'. */
+ ASC_ASSERT(last_scp != NULL);
+ last_scp->host_scribble = (unsigned char *)asc_dequeue_list(
+ &boardp->active, &new_last_scp, ASC_TID_ALL);
+ if (new_last_scp != NULL) {
+ ASC_ASSERT(REQPNEXT(last_scp) != NULL);
+ for (tscp = REQPNEXT(last_scp); tscp; tscp = REQPNEXT(tscp)) {
+ tscp->result = HOST_BYTE(DID_RESET);
+ }
+ last_scp = new_last_scp;
+ }
+ }
+
+ /*
+ * Dequeue all 'waiting' requests and set the request status
+ * to DID_RESET.
+ */
+ if (done_scp == NULL) {
+ done_scp = asc_dequeue_list(&boardp->waiting, &last_scp, ASC_TID_ALL);
+ for (tscp = done_scp; tscp; tscp = REQPNEXT(tscp)) {
+ tscp->result = HOST_BYTE(DID_RESET);
+ }
+ } else {
+ /* Append to 'done_scp' at the end with 'last_scp'. */
+ ASC_ASSERT(last_scp != NULL);
+ last_scp->host_scribble = (unsigned char *)asc_dequeue_list(
+ &boardp->waiting, &new_last_scp, ASC_TID_ALL);
+ if (new_last_scp != NULL) {
+ ASC_ASSERT(REQPNEXT(last_scp) != NULL);
+ for (tscp = REQPNEXT(last_scp); tscp; tscp = REQPNEXT(tscp)) {
+ tscp->result = HOST_BYTE(DID_RESET);
+ }
+ last_scp = new_last_scp;
+ }
+ }
+
+ /* Save the time of the most recently completed reset. */
+ boardp->last_reset = jiffies;
+
+ /* Clear reset flag. */
+ boardp->flags &= ~ASC_HOST_IN_RESET;
+ spin_unlock_irqrestore(&boardp->lock, flags);
+
+ /*
+ * Complete all the 'done_scp' requests.
+ */
+ if (done_scp != NULL) {
+ asc_scsi_done_list(done_scp);
+ }
+
+ ASC_DBG1(1, "advansys_reset: ret %d\n", ret);
+
+ return ret;
+}
+
+/*
+ * advansys_biosparam()
+ *
+ * Translate disk drive geometry if the "BIOS greater than 1 GB"
+ * support is enabled for a drive.
+ *
+ * ip (information pointer) is an int array with the following definition:
+ * ip[0]: heads
+ * ip[1]: sectors
+ * ip[2]: cylinders
+ */
+int
+advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int ip[])
+{
+ asc_board_t *boardp;
+
+ ASC_DBG(1, "advansys_biosparam: begin\n");
+ ASC_STATS(sdev->host, biosparam);
+ boardp = ASC_BOARDP(sdev->host);
+ if (ASC_NARROW_BOARD(boardp)) {
+ if ((boardp->dvc_var.asc_dvc_var.dvc_cntl &
+ ASC_CNTL_BIOS_GT_1GB) && capacity > 0x200000) {
+ ip[0] = 255;
+ ip[1] = 63;
+ } else {
+ ip[0] = 64;
+ ip[1] = 32;
+ }
+ } else {
+ if ((boardp->dvc_var.adv_dvc_var.bios_ctrl &
+ BIOS_CTRL_EXTENDED_XLAT) && capacity > 0x200000) {
+ ip[0] = 255;
+ ip[1] = 63;
+ } else {
+ ip[0] = 64;
+ ip[1] = 32;
+ }
+ }
+ ip[2] = (unsigned long)capacity / (ip[0] * ip[1]);
+ ASC_DBG(1, "advansys_biosparam: end\n");
+ return 0;
+}
+
+/*
+ * advansys_setup()
+ *
+ * This function is called from init/main.c at boot time.
+ * It it passed LILO parameters that can be set from the
+ * LILO command line or in /etc/lilo.conf.
+ *
+ * It is used by the AdvanSys driver to either disable I/O
+ * port scanning or to limit scanning to 1 - 4 I/O ports.
+ * Regardless of the option setting EISA and PCI boards
+ * will still be searched for and detected. This option
+ * only affects searching for ISA and VL boards.
+ *
+ * If ADVANSYS_DEBUG is defined the driver debug level may
+ * be set using the 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port.
+ *
+ * Examples:
+ * 1. Eliminate I/O port scanning:
+ * boot: linux advansys=
+ * or
+ * boot: linux advansys=0x0
+ * 2. Limit I/O port scanning to one I/O port:
+ * boot: linux advansys=0x110
+ * 3. Limit I/O port scanning to four I/O ports:
+ * boot: linux advansys=0x110,0x210,0x230,0x330
+ * 4. If ADVANSYS_DEBUG, limit I/O port scanning to four I/O ports and
+ * set the driver debug level to 2.
+ * boot: linux advansys=0x110,0x210,0x230,0x330,0xdeb2
+ *
+ * ints[0] - number of arguments
+ * ints[1] - first argument
+ * ints[2] - second argument
+ * ...
+ */
+void __init
+advansys_setup(char *str, int *ints)
+{
+ int i;
+
+ if (asc_iopflag == ASC_TRUE) {
+ printk("AdvanSys SCSI: 'advansys' LILO option may appear only once\n");
+ return;
+ }
+
+ asc_iopflag = ASC_TRUE;
+
+ if (ints[0] > ASC_NUM_IOPORT_PROBE) {
+#ifdef ADVANSYS_DEBUG
+ if ((ints[0] == ASC_NUM_IOPORT_PROBE + 1) &&
+ (ints[ASC_NUM_IOPORT_PROBE + 1] >> 4 == 0xdeb)) {
+ asc_dbglvl = ints[ASC_NUM_IOPORT_PROBE + 1] & 0xf;
+ } else {
+#endif /* ADVANSYS_DEBUG */
+ printk("AdvanSys SCSI: only %d I/O ports accepted\n",
+ ASC_NUM_IOPORT_PROBE);
+#ifdef ADVANSYS_DEBUG
+ }
+#endif /* ADVANSYS_DEBUG */
+ }
+
+#ifdef ADVANSYS_DEBUG
+ ASC_DBG1(1, "advansys_setup: ints[0] %d\n", ints[0]);
+ for (i = 1; i < ints[0]; i++) {
+ ASC_DBG2(1, " ints[%d] 0x%x", i, ints[i]);
+ }
+ ASC_DBG(1, "\n");
+#endif /* ADVANSYS_DEBUG */
+
+ for (i = 1; i <= ints[0] && i <= ASC_NUM_IOPORT_PROBE; i++) {
+ asc_ioport[i-1] = ints[i];
+ ASC_DBG2(1, "advansys_setup: asc_ioport[%d] 0x%x\n",
+ i - 1, asc_ioport[i-1]);
+ }
+}
+
+
+/*
+ * --- Loadable Driver Support
+ */
+
+static struct scsi_host_template driver_template = {
+ .proc_name = "advansys",
+#ifdef CONFIG_PROC_FS
+ .proc_info = advansys_proc_info,
+#endif
+ .name = "advansys",
+ .detect = advansys_detect,
+ .release = advansys_release,
+ .info = advansys_info,
+ .queuecommand = advansys_queuecommand,
+ .eh_bus_reset_handler = advansys_reset,
+ .bios_param = advansys_biosparam,
+ .slave_configure = advansys_slave_configure,
+ /*
+ * Because the driver may control an ISA adapter 'unchecked_isa_dma'
+ * must be set. The flag will be cleared in advansys_detect for non-ISA
+ * adapters. Refer to the comment in scsi_module.c for more information.
+ */
+ .unchecked_isa_dma = 1,
+ /*
+ * All adapters controlled by this driver are capable of large
+ * scatter-gather lists. According to the mid-level SCSI documentation
+ * this obviates any performance gain provided by setting
+ * 'use_clustering'. But empirically while CPU utilization is increased
+ * by enabling clustering, I/O throughput increases as well.
+ */
+ .use_clustering = ENABLE_CLUSTERING,
+};
+#include "scsi_module.c"
+
+
+/*
+ * --- Miscellaneous Driver Functions
+ */
+
+/*
+ * First-level interrupt handler.
+ *
+ * 'dev_id' is a pointer to the interrupting adapter's asc_board_t. Because
+ * all boards are currently checked for interrupts on each interrupt, 'dev_id'
+ * is not referenced. 'dev_id' could be used to identify an interrupt passed
+ * to the AdvanSys driver which is for a device sharing an interrupt with
+ * an AdvanSys adapter.
+ */
+STATIC irqreturn_t
+advansys_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ ulong flags;
+ int i;
+ asc_board_t *boardp;
+ struct scsi_cmnd *done_scp = NULL, *last_scp = NULL;
+ struct scsi_cmnd *new_last_scp;
+ struct Scsi_Host *shp;
+
+ ASC_DBG(1, "advansys_interrupt: begin\n");
+
+ /*
+ * Check for interrupts on all boards.
+ * AscISR() will call asc_isr_callback().
+ */
+ for (i = 0; i < asc_board_count; i++) {
+ shp = asc_host[i];
+ boardp = ASC_BOARDP(shp);
+ ASC_DBG2(2, "advansys_interrupt: i %d, boardp 0x%lx\n",
+ i, (ulong) boardp);
+ spin_lock_irqsave(&boardp->lock, flags);
+ if (ASC_NARROW_BOARD(boardp)) {
+ /*
+ * Narrow Board
+ */
+ if (AscIsIntPending(shp->io_port)) {
+ ASC_STATS(shp, interrupt);
+ ASC_DBG(1, "advansys_interrupt: before AscISR()\n");
+ AscISR(&boardp->dvc_var.asc_dvc_var);
+ }
+ } else {
+ /*
+ * Wide Board
+ */
+ ASC_DBG(1, "advansys_interrupt: before AdvISR()\n");
+ if (AdvISR(&boardp->dvc_var.adv_dvc_var)) {
+ ASC_STATS(shp, interrupt);
+ }
+ }
+
+ /*
+ * Start waiting requests and create a list of completed requests.
+ *
+ * If a reset request is being performed for the board, the reset
+ * handler will complete pending requests after it has completed.
+ */
+ if ((boardp->flags & ASC_HOST_IN_RESET) == 0) {
+ ASC_DBG2(1, "advansys_interrupt: done_scp 0x%lx, last_scp 0x%lx\n",
+ (ulong) done_scp, (ulong) last_scp);
+
+ /* Start any waiting commands for the board. */
+ if (!ASC_QUEUE_EMPTY(&boardp->waiting)) {
+ ASC_DBG(1, "advansys_interrupt: before asc_execute_queue()\n");
+ asc_execute_queue(&boardp->waiting);
+ }
+
+ /*
+ * Add to the list of requests that must be completed.
+ *
+ * 'done_scp' will always be NULL on the first iteration
+ * of this loop. 'last_scp' is set at the same time as
+ * 'done_scp'.
+ */
+ if (done_scp == NULL) {
+ done_scp = asc_dequeue_list(&boardp->done, &last_scp,
+ ASC_TID_ALL);
+ } else {
+ ASC_ASSERT(last_scp != NULL);
+ last_scp->host_scribble = (unsigned char *)asc_dequeue_list(
+ &boardp->done, &new_last_scp, ASC_TID_ALL);
+ if (new_last_scp != NULL) {
+ ASC_ASSERT(REQPNEXT(last_scp) != NULL);
+ last_scp = new_last_scp;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&boardp->lock, flags);
+ }
+
+ /*
+ * If interrupts were enabled on entry, then they
+ * are now enabled here.
+ *
+ * Complete all requests on the done list.
+ */
+
+ asc_scsi_done_list(done_scp);
+
+ ASC_DBG(1, "advansys_interrupt: end\n");
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set the number of commands to queue per device for the
+ * specified host adapter.
+ */
+STATIC int
+advansys_slave_configure(struct scsi_device *device)
+{
+ asc_board_t *boardp;
+
+ boardp = ASC_BOARDP(device->host);
+ boardp->flags |= ASC_SELECT_QUEUE_DEPTHS;
+ /*
+ * Save a pointer to the device and set its initial/maximum
+ * queue depth. Only save the pointer for a lun0 dev though.
+ */
+ if(device->lun == 0)
+ boardp->device[device->id] = device;
+ if(device->tagged_supported) {
+ if (ASC_NARROW_BOARD(boardp)) {
+ scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
+ boardp->dvc_var.asc_dvc_var.max_dvc_qng[device->id]);
+ } else {
+ scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
+ boardp->dvc_var.adv_dvc_var.max_dvc_qng);
+ }
+ } else {
+ scsi_adjust_queue_depth(device, 0, device->host->cmd_per_lun);
+ }
+ ASC_DBG4(1, "advansys_slave_configure: device 0x%lx, boardp 0x%lx, id %d, depth %d\n",
+ (ulong) device, (ulong) boardp, device->id, device->queue_depth);
+ return 0;
+}
+
+/*
+ * Complete all requests on the singly linked list pointed
+ * to by 'scp'.
+ *
+ * Interrupts can be enabled on entry.
+ */
+STATIC void
+asc_scsi_done_list(struct scsi_cmnd *scp)
+{
+ struct scsi_cmnd *tscp;
+
+ ASC_DBG(2, "asc_scsi_done_list: begin\n");
+ while (scp != NULL) {
+ asc_board_t *boardp;
+ struct device *dev;
+
+ ASC_DBG1(3, "asc_scsi_done_list: scp 0x%lx\n", (ulong) scp);
+ tscp = REQPNEXT(scp);
+ scp->host_scribble = NULL;
+
+ boardp = ASC_BOARDP(scp->device->host);
+
+ if (ASC_NARROW_BOARD(boardp))
+ dev = boardp->dvc_cfg.asc_dvc_cfg.dev;
+ else
+ dev = boardp->dvc_cfg.adv_dvc_cfg.dev;
+
+ if (scp->use_sg)
+ dma_unmap_sg(dev, (struct scatterlist *)scp->request_buffer,
+ scp->use_sg, scp->sc_data_direction);
+ else if (scp->request_bufflen)
+ dma_unmap_single(dev, scp->SCp.dma_handle,
+ scp->request_bufflen, scp->sc_data_direction);
+
+ ASC_STATS(scp->device->host, done);
+ ASC_ASSERT(scp->scsi_done != NULL);
+
+ scp->scsi_done(scp);
+
+ scp = tscp;
+ }
+ ASC_DBG(2, "asc_scsi_done_list: done\n");
+ return;
+}
+
+/*
+ * Execute a single 'Scsi_Cmnd'.
+ *
+ * The function 'done' is called when the request has been completed.
+ *
+ * Scsi_Cmnd:
+ *
+ * host - board controlling device
+ * device - device to send command
+ * target - target of device
+ * lun - lun of device
+ * cmd_len - length of SCSI CDB
+ * cmnd - buffer for SCSI 8, 10, or 12 byte CDB
+ * use_sg - if non-zero indicates scatter-gather request with use_sg elements
+ *
+ * if (use_sg == 0) {
+ * request_buffer - buffer address for request
+ * request_bufflen - length of request buffer
+ * } else {
+ * request_buffer - pointer to scatterlist structure
+ * }
+ *
+ * sense_buffer - sense command buffer
+ *
+ * result (4 bytes of an int):
+ * Byte Meaning
+ * 0 SCSI Status Byte Code
+ * 1 SCSI One Byte Message Code
+ * 2 Host Error Code
+ * 3 Mid-Level Error Code
+ *
+ * host driver fields:
+ * SCp - Scsi_Pointer used for command processing status
+ * scsi_done - used to save caller's done function
+ * host_scribble - used for pointer to another struct scsi_cmnd
+ *
+ * If this function returns ASC_NOERROR the request has been enqueued
+ * on the board's 'active' queue and will be completed from the
+ * interrupt handler.
+ *
+ * If this function returns ASC_NOERROR the request has been enqueued
+ * on the board's 'done' queue and must be completed by the caller.
+ *
+ * If ASC_BUSY is returned the request will be enqueued by the
+ * caller on the target's waiting queue and re-tried later.
+ */
+STATIC int
+asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
+{
+ asc_board_t *boardp;
+ ASC_DVC_VAR *asc_dvc_varp;
+ ADV_DVC_VAR *adv_dvc_varp;
+ ADV_SCSI_REQ_Q *adv_scsiqp;
+ struct scsi_device *device;
+ int ret;
+
+ ASC_DBG2(1, "asc_execute_scsi_cmnd: scp 0x%lx, done 0x%lx\n",
+ (ulong) scp, (ulong) scp->scsi_done);
+
+ boardp = ASC_BOARDP(scp->device->host);
+ device = boardp->device[scp->device->id];
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ /*
+ * Build and execute Narrow Board request.
+ */
+
+ asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+
+ /*
+ * Build Asc Library request structure using the
+ * global structures 'asc_scsi_req' and 'asc_sg_head'.
+ *
+ * If an error is returned, then the request has been
+ * queued on the board done queue. It will be completed
+ * by the caller.
+ *
+ * asc_build_req() can not return ASC_BUSY.
+ */
+ if (asc_build_req(boardp, scp) == ASC_ERROR) {
+ ASC_STATS(scp->device->host, build_error);
+ return ASC_ERROR;
+ }
+
+ /*
+ * Execute the command. If there is no error, add the command
+ * to the active queue.
+ */
+ switch (ret = AscExeScsiQueue(asc_dvc_varp, &asc_scsi_q)) {
+ case ASC_NOERROR:
+ ASC_STATS(scp->device->host, exe_noerror);
+ /*
+ * Increment monotonically increasing per device successful
+ * request counter. Wrapping doesn't matter.
+ */
+ boardp->reqcnt[scp->device->id]++;
+ asc_enqueue(&boardp->active, scp, ASC_BACK);
+ ASC_DBG(1,
+ "asc_execute_scsi_cmnd: AscExeScsiQueue(), ASC_NOERROR\n");
+ break;
+ case ASC_BUSY:
+ /*
+ * Caller will enqueue request on the target's waiting queue
+ * and retry later.
+ */
+ ASC_STATS(scp->device->host, exe_busy);
+ break;
+ case ASC_ERROR:
+ ASC_PRINT2(
+"asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() ASC_ERROR, err_code 0x%x\n",
+ boardp->id, asc_dvc_varp->err_code);
+ ASC_STATS(scp->device->host, exe_error);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ break;
+ default:
+ ASC_PRINT2(
+"asc_execute_scsi_cmnd: board %d: AscExeScsiQueue() unknown, err_code 0x%x\n",
+ boardp->id, asc_dvc_varp->err_code);
+ ASC_STATS(scp->device->host, exe_unknown);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ break;
+ }
+ } else {
+ /*
+ * Build and execute Wide Board request.
+ */
+ adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
+
+ /*
+ * Build and get a pointer to an Adv Library request structure.
+ *
+ * If the request is successfully built then send it below,
+ * otherwise return with an error.
+ */
+ switch (adv_build_req(boardp, scp, &adv_scsiqp)) {
+ case ASC_NOERROR:
+ ASC_DBG(3, "asc_execute_scsi_cmnd: adv_build_req ASC_NOERROR\n");
+ break;
+ case ASC_BUSY:
+ ASC_DBG(1, "asc_execute_scsi_cmnd: adv_build_req ASC_BUSY\n");
+ /*
+ * If busy is returned the request has not been enqueued.
+ * It will be enqueued by the caller on the target's waiting
+ * queue and retried later.
+ *
+ * The asc_stats fields 'adv_build_noreq' and 'adv_build_nosg'
+ * count wide board busy conditions. They are updated in
+ * adv_build_req and adv_get_sglist, respectively.
+ */
+ return ASC_BUSY;
+ case ASC_ERROR:
+ /*
+ * If an error is returned, then the request has been
+ * queued on the board done queue. It will be completed
+ * by the caller.
+ */
+ default:
+ ASC_DBG(1, "asc_execute_scsi_cmnd: adv_build_req ASC_ERROR\n");
+ ASC_STATS(scp->device->host, build_error);
+ return ASC_ERROR;
+ }
+
+ /*
+ * Execute the command. If there is no error, add the command
+ * to the active queue.
+ */
+ switch (ret = AdvExeScsiQueue(adv_dvc_varp, adv_scsiqp)) {
+ case ASC_NOERROR:
+ ASC_STATS(scp->device->host, exe_noerror);
+ /*
+ * Increment monotonically increasing per device successful
+ * request counter. Wrapping doesn't matter.
+ */
+ boardp->reqcnt[scp->device->id]++;
+ asc_enqueue(&boardp->active, scp, ASC_BACK);
+ ASC_DBG(1,
+ "asc_execute_scsi_cmnd: AdvExeScsiQueue(), ASC_NOERROR\n");
+ break;
+ case ASC_BUSY:
+ /*
+ * Caller will enqueue request on the target's waiting queue
+ * and retry later.
+ */
+ ASC_STATS(scp->device->host, exe_busy);
+ break;
+ case ASC_ERROR:
+ ASC_PRINT2(
+"asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() ASC_ERROR, err_code 0x%x\n",
+ boardp->id, adv_dvc_varp->err_code);
+ ASC_STATS(scp->device->host, exe_error);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ break;
+ default:
+ ASC_PRINT2(
+"asc_execute_scsi_cmnd: board %d: AdvExeScsiQueue() unknown, err_code 0x%x\n",
+ boardp->id, adv_dvc_varp->err_code);
+ ASC_STATS(scp->device->host, exe_unknown);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ break;
+ }
+ }
+
+ ASC_DBG(1, "asc_execute_scsi_cmnd: end\n");
+ return ret;
+}
+
+/*
+ * Build a request structure for the Asc Library (Narrow Board).
+ *
+ * The global structures 'asc_scsi_q' and 'asc_sg_head' are
+ * used to build the request.
+ *
+ * If an error occurs, then queue the request on the board done
+ * queue and return ASC_ERROR.
+ */
+STATIC int
+asc_build_req(asc_board_t *boardp, struct scsi_cmnd *scp)
+{
+ struct device *dev = boardp->dvc_cfg.asc_dvc_cfg.dev;
+
+ /*
+ * Mutually exclusive access is required to 'asc_scsi_q' and
+ * 'asc_sg_head' until after the request is started.
+ */
+ memset(&asc_scsi_q, 0, sizeof(ASC_SCSI_Q));
+
+ /*
+ * Point the ASC_SCSI_Q to the 'struct scsi_cmnd'.
+ */
+ asc_scsi_q.q2.srb_ptr = ASC_VADDR_TO_U32(scp);
+
+ /*
+ * Build the ASC_SCSI_Q request.
+ *
+ * For narrow boards a CDB length maximum of 12 bytes
+ * is supported.
+ */
+ if (scp->cmd_len > ASC_MAX_CDB_LEN) {
+ ASC_PRINT3(
+"asc_build_req: board %d: cmd_len %d > ASC_MAX_CDB_LEN %d\n",
+ boardp->id, scp->cmd_len, ASC_MAX_CDB_LEN);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ return ASC_ERROR;
+ }
+ asc_scsi_q.cdbptr = &scp->cmnd[0];
+ asc_scsi_q.q2.cdb_len = scp->cmd_len;
+ asc_scsi_q.q1.target_id = ASC_TID_TO_TARGET_ID(scp->device->id);
+ asc_scsi_q.q1.target_lun = scp->device->lun;
+ asc_scsi_q.q2.target_ix = ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun);
+ asc_scsi_q.q1.sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0]));
+ asc_scsi_q.q1.sense_len = sizeof(scp->sense_buffer);
+
+ /*
+ * If there are any outstanding requests for the current target,
+ * then every 255th request send an ORDERED request. This heuristic
+ * tries to retain the benefit of request sorting while preventing
+ * request starvation. 255 is the max number of tags or pending commands
+ * a device may have outstanding.
+ *
+ * The request count is incremented below for every successfully
+ * started request.
+ *
+ */
+ if ((boardp->dvc_var.asc_dvc_var.cur_dvc_qng[scp->device->id] > 0) &&
+ (boardp->reqcnt[scp->device->id] % 255) == 0) {
+ asc_scsi_q.q2.tag_code = MSG_ORDERED_TAG;
+ } else {
+ asc_scsi_q.q2.tag_code = MSG_SIMPLE_TAG;
+ }
+
+ /*
+ * Build ASC_SCSI_Q for a contiguous buffer or a scatter-gather
+ * buffer command.
+ */
+ if (scp->use_sg == 0) {
+ /*
+ * CDB request of single contiguous buffer.
+ */
+ ASC_STATS(scp->device->host, cont_cnt);
+ scp->SCp.dma_handle = scp->request_bufflen ?
+ dma_map_single(dev, scp->request_buffer,
+ scp->request_bufflen, scp->sc_data_direction) : 0;
+ asc_scsi_q.q1.data_addr = cpu_to_le32(scp->SCp.dma_handle);
+ asc_scsi_q.q1.data_cnt = cpu_to_le32(scp->request_bufflen);
+ ASC_STATS_ADD(scp->device->host, cont_xfer,
+ ASC_CEILING(scp->request_bufflen, 512));
+ asc_scsi_q.q1.sg_queue_cnt = 0;
+ asc_scsi_q.sg_head = NULL;
+ } else {
+ /*
+ * CDB scatter-gather request list.
+ */
+ int sgcnt;
+ int use_sg;
+ struct scatterlist *slp;
+
+ slp = (struct scatterlist *)scp->request_buffer;
+ use_sg = dma_map_sg(dev, slp, scp->use_sg, scp->sc_data_direction);
+
+ if (use_sg > scp->device->host->sg_tablesize) {
+ ASC_PRINT3(
+"asc_build_req: board %d: use_sg %d > sg_tablesize %d\n",
+ boardp->id, use_sg, scp->device->host->sg_tablesize);
+ dma_unmap_sg(dev, slp, scp->use_sg, scp->sc_data_direction);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ return ASC_ERROR;
+ }
+
+ ASC_STATS(scp->device->host, sg_cnt);
+
+ /*
+ * Use global ASC_SG_HEAD structure and set the ASC_SCSI_Q
+ * structure to point to it.
+ */
+ memset(&asc_sg_head, 0, sizeof(ASC_SG_HEAD));
+
+ asc_scsi_q.q1.cntl |= QC_SG_HEAD;
+ asc_scsi_q.sg_head = &asc_sg_head;
+ asc_scsi_q.q1.data_cnt = 0;
+ asc_scsi_q.q1.data_addr = 0;
+ /* This is a byte value, otherwise it would need to be swapped. */
+ asc_sg_head.entry_cnt = asc_scsi_q.q1.sg_queue_cnt = use_sg;
+ ASC_STATS_ADD(scp->device->host, sg_elem, asc_sg_head.entry_cnt);
+
+ /*
+ * Convert scatter-gather list into ASC_SG_HEAD list.
+ */
+ for (sgcnt = 0; sgcnt < use_sg; sgcnt++, slp++) {
+ asc_sg_head.sg_list[sgcnt].addr = cpu_to_le32(sg_dma_address(slp));
+ asc_sg_head.sg_list[sgcnt].bytes = cpu_to_le32(sg_dma_len(slp));
+ ASC_STATS_ADD(scp->device->host, sg_xfer, ASC_CEILING(sg_dma_len(slp), 512));
+ }
+ }
+
+ ASC_DBG_PRT_ASC_SCSI_Q(2, &asc_scsi_q);
+ ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len);
+
+ return ASC_NOERROR;
+}
+
+/*
+ * Build a request structure for the Adv Library (Wide Board).
+ *
+ * If an adv_req_t can not be allocated to issue the request,
+ * then return ASC_BUSY. If an error occurs, then return ASC_ERROR.
+ *
+ * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the
+ * microcode for DMA addresses or math operations are byte swapped
+ * to little-endian order.
+ */
+STATIC int
+adv_build_req(asc_board_t *boardp, struct scsi_cmnd *scp,
+ ADV_SCSI_REQ_Q **adv_scsiqpp)
+{
+ adv_req_t *reqp;
+ ADV_SCSI_REQ_Q *scsiqp;
+ int i;
+ int ret;
+ struct device *dev = boardp->dvc_cfg.adv_dvc_cfg.dev;
+
+ /*
+ * Allocate an adv_req_t structure from the board to execute
+ * the command.
+ */
+ if (boardp->adv_reqp == NULL) {
+ ASC_DBG(1, "adv_build_req: no free adv_req_t\n");
+ ASC_STATS(scp->device->host, adv_build_noreq);
+ return ASC_BUSY;
+ } else {
+ reqp = boardp->adv_reqp;
+ boardp->adv_reqp = reqp->next_reqp;
+ reqp->next_reqp = NULL;
+ }
+
+ /*
+ * Get 32-byte aligned ADV_SCSI_REQ_Q and ADV_SG_BLOCK pointers.
+ */
+ scsiqp = (ADV_SCSI_REQ_Q *) ADV_32BALIGN(&reqp->scsi_req_q);
+
+ /*
+ * Initialize the structure.
+ */
+ scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0;
+
+ /*
+ * Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure.
+ */
+ scsiqp->srb_ptr = ASC_VADDR_TO_U32(reqp);
+
+ /*
+ * Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure.
+ */
+ reqp->cmndp = scp;
+
+ /*
+ * Build the ADV_SCSI_REQ_Q request.
+ */
+
+ /*
+ * Set CDB length and copy it to the request structure.
+ * For wide boards a CDB length maximum of 16 bytes
+ * is supported.
+ */
+ if (scp->cmd_len > ADV_MAX_CDB_LEN) {
+ ASC_PRINT3(
+"adv_build_req: board %d: cmd_len %d > ADV_MAX_CDB_LEN %d\n",
+ boardp->id, scp->cmd_len, ADV_MAX_CDB_LEN);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+ return ASC_ERROR;
+ }
+ scsiqp->cdb_len = scp->cmd_len;
+ /* Copy first 12 CDB bytes to cdb[]. */
+ for (i = 0; i < scp->cmd_len && i < 12; i++) {
+ scsiqp->cdb[i] = scp->cmnd[i];
+ }
+ /* Copy last 4 CDB bytes, if present, to cdb16[]. */
+ for (; i < scp->cmd_len; i++) {
+ scsiqp->cdb16[i - 12] = scp->cmnd[i];
+ }
+
+ scsiqp->target_id = scp->device->id;
+ scsiqp->target_lun = scp->device->lun;
+
+ scsiqp->sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0]));
+ scsiqp->sense_len = sizeof(scp->sense_buffer);
+
+ /*
+ * Build ADV_SCSI_REQ_Q for a contiguous buffer or a scatter-gather
+ * buffer command.
+ */
+
+ scsiqp->data_cnt = cpu_to_le32(scp->request_bufflen);
+ scsiqp->vdata_addr = scp->request_buffer;
+ scsiqp->data_addr = cpu_to_le32(virt_to_bus(scp->request_buffer));
+
+ if (scp->use_sg == 0) {
+ /*
+ * CDB request of single contiguous buffer.
+ */
+ reqp->sgblkp = NULL;
+ scsiqp->data_cnt = cpu_to_le32(scp->request_bufflen);
+ if (scp->request_bufflen) {
+ scsiqp->vdata_addr = scp->request_buffer;
+ scp->SCp.dma_handle =
+ dma_map_single(dev, scp->request_buffer,
+ scp->request_bufflen, scp->sc_data_direction);
+ } else {
+ scsiqp->vdata_addr = 0;
+ scp->SCp.dma_handle = 0;
+ }
+ scsiqp->data_addr = cpu_to_le32(scp->SCp.dma_handle);
+ scsiqp->sg_list_ptr = NULL;
+ scsiqp->sg_real_addr = 0;
+ ASC_STATS(scp->device->host, cont_cnt);
+ ASC_STATS_ADD(scp->device->host, cont_xfer,
+ ASC_CEILING(scp->request_bufflen, 512));
+ } else {
+ /*
+ * CDB scatter-gather request list.
+ */
+ struct scatterlist *slp;
+ int use_sg;
+
+ slp = (struct scatterlist *)scp->request_buffer;
+ use_sg = dma_map_sg(dev, slp, scp->use_sg, scp->sc_data_direction);
+
+ if (use_sg > ADV_MAX_SG_LIST) {
+ ASC_PRINT3(
+"adv_build_req: board %d: use_sg %d > ADV_MAX_SG_LIST %d\n",
+ boardp->id, use_sg, scp->device->host->sg_tablesize);
+ dma_unmap_sg(dev, slp, scp->use_sg, scp->sc_data_direction);
+ scp->result = HOST_BYTE(DID_ERROR);
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+
+ /*
+ * Free the 'adv_req_t' structure by adding it back to the
+ * board free list.
+ */
+ reqp->next_reqp = boardp->adv_reqp;
+ boardp->adv_reqp = reqp;
+
+ return ASC_ERROR;
+ }
+
+ if ((ret = adv_get_sglist(boardp, reqp, scp, use_sg)) != ADV_SUCCESS) {
+ /*
+ * Free the adv_req_t structure by adding it back to the
+ * board free list.
+ */
+ reqp->next_reqp = boardp->adv_reqp;
+ boardp->adv_reqp = reqp;
+
+ return ret;
+ }
+
+ ASC_STATS(scp->device->host, sg_cnt);
+ ASC_STATS_ADD(scp->device->host, sg_elem, use_sg);
+ }
+
+ ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
+ ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len);
+
+ *adv_scsiqpp = scsiqp;
+
+ return ASC_NOERROR;
+}
+
+/*
+ * Build scatter-gather list for Adv Library (Wide Board).
+ *
+ * Additional ADV_SG_BLOCK structures will need to be allocated
+ * if the total number of scatter-gather elements exceeds
+ * NO_OF_SG_PER_BLOCK (15). The ADV_SG_BLOCK structures are
+ * assumed to be physically contiguous.
+ *
+ * Return:
+ * ADV_SUCCESS(1) - SG List successfully created
+ * ADV_ERROR(-1) - SG List creation failed
+ */
+STATIC int
+adv_get_sglist(asc_board_t *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, int use_sg)
+{
+ adv_sgblk_t *sgblkp;
+ ADV_SCSI_REQ_Q *scsiqp;
+ struct scatterlist *slp;
+ int sg_elem_cnt;
+ ADV_SG_BLOCK *sg_block, *prev_sg_block;
+ ADV_PADDR sg_block_paddr;
+ int i;
+
+ scsiqp = (ADV_SCSI_REQ_Q *) ADV_32BALIGN(&reqp->scsi_req_q);
+ slp = (struct scatterlist *) scp->request_buffer;
+ sg_elem_cnt = use_sg;
+ prev_sg_block = NULL;
+ reqp->sgblkp = NULL;
+
+ do
+ {
+ /*
+ * Allocate a 'adv_sgblk_t' structure from the board free
+ * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK
+ * (15) scatter-gather elements.
+ */
+ if ((sgblkp = boardp->adv_sgblkp) == NULL) {
+ ASC_DBG(1, "adv_get_sglist: no free adv_sgblk_t\n");
+ ASC_STATS(scp->device->host, adv_build_nosg);
+
+ /*
+ * Allocation failed. Free 'adv_sgblk_t' structures already
+ * allocated for the request.
+ */
+ while ((sgblkp = reqp->sgblkp) != NULL)
+ {
+ /* Remove 'sgblkp' from the request list. */
+ reqp->sgblkp = sgblkp->next_sgblkp;
+
+ /* Add 'sgblkp' to the board free list. */
+ sgblkp->next_sgblkp = boardp->adv_sgblkp;
+ boardp->adv_sgblkp = sgblkp;
+ }
+ return ASC_BUSY;
+ } else {
+ /* Complete 'adv_sgblk_t' board allocation. */
+ boardp->adv_sgblkp = sgblkp->next_sgblkp;
+ sgblkp->next_sgblkp = NULL;
+
+ /*
+ * Get 8 byte aligned virtual and physical addresses for
+ * the allocated ADV_SG_BLOCK structure.
+ */
+ sg_block = (ADV_SG_BLOCK *) ADV_8BALIGN(&sgblkp->sg_block);
+ sg_block_paddr = virt_to_bus(sg_block);
+
+ /*
+ * Check if this is the first 'adv_sgblk_t' for the request.
+ */
+ if (reqp->sgblkp == NULL)
+ {
+ /* Request's first scatter-gather block. */
+ reqp->sgblkp = sgblkp;
+
+ /*
+ * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical
+ * address pointers.
+ */
+ scsiqp->sg_list_ptr = sg_block;
+ scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr);
+ } else
+ {
+ /* Request's second or later scatter-gather block. */
+ sgblkp->next_sgblkp = reqp->sgblkp;
+ reqp->sgblkp = sgblkp;
+
+ /*
+ * Point the previous ADV_SG_BLOCK structure to
+ * the newly allocated ADV_SG_BLOCK structure.
+ */
+ ASC_ASSERT(prev_sg_block != NULL);
+ prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr);
+ }
+ }
+
+ for (i = 0; i < NO_OF_SG_PER_BLOCK; i++)
+ {
+ sg_block->sg_list[i].sg_addr = cpu_to_le32(sg_dma_address(slp));
+ sg_block->sg_list[i].sg_count = cpu_to_le32(sg_dma_len(slp));
+ ASC_STATS_ADD(scp->device->host, sg_xfer, ASC_CEILING(sg_dma_len(slp), 512));
+
+ if (--sg_elem_cnt == 0)
+ { /* Last ADV_SG_BLOCK and scatter-gather entry. */
+ sg_block->sg_cnt = i + 1;
+ sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
+ return ADV_SUCCESS;
+ }
+ slp++;
+ }
+ sg_block->sg_cnt = NO_OF_SG_PER_BLOCK;
+ prev_sg_block = sg_block;
+ }
+ while (1);
+ /* NOTREACHED */
+}
+
+/*
+ * asc_isr_callback() - Second Level Interrupt Handler called by AscISR().
+ *
+ * Interrupt callback function for the Narrow SCSI Asc Library.
+ */
+STATIC void
+asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)
+{
+ asc_board_t *boardp;
+ struct scsi_cmnd *scp;
+ struct Scsi_Host *shp;
+ int i;
+
+ ASC_DBG2(1, "asc_isr_callback: asc_dvc_varp 0x%lx, qdonep 0x%lx\n",
+ (ulong) asc_dvc_varp, (ulong) qdonep);
+ ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep);
+
+ /*
+ * Get the struct scsi_cmnd structure and Scsi_Host structure for the
+ * command that has been completed.
+ */
+ scp = (struct scsi_cmnd *) ASC_U32_TO_VADDR(qdonep->d2.srb_ptr);
+ ASC_DBG1(1, "asc_isr_callback: scp 0x%lx\n", (ulong) scp);
+
+ if (scp == NULL) {
+ ASC_PRINT("asc_isr_callback: scp is NULL\n");
+ return;
+ }
+ ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
+
+ /*
+ * If the request's host pointer is not valid, display a
+ * message and return.
+ */
+ shp = scp->device->host;
+ for (i = 0; i < asc_board_count; i++) {
+ if (asc_host[i] == shp) {
+ break;
+ }
+ }
+ if (i == asc_board_count) {
+ ASC_PRINT2(
+ "asc_isr_callback: scp 0x%lx has bad host pointer, host 0x%lx\n",
+ (ulong) scp, (ulong) shp);
+ return;
+ }
+
+ ASC_STATS(shp, callback);
+ ASC_DBG1(1, "asc_isr_callback: shp 0x%lx\n", (ulong) shp);
+
+ /*
+ * If the request isn't found on the active queue, it may
+ * have been removed to handle a reset request.
+ * Display a message and return.
+ */
+ boardp = ASC_BOARDP(shp);
+ ASC_ASSERT(asc_dvc_varp == &boardp->dvc_var.asc_dvc_var);
+ if (asc_rmqueue(&boardp->active, scp) == ASC_FALSE) {
+ ASC_PRINT2(
+ "asc_isr_callback: board %d: scp 0x%lx not on active queue\n",
+ boardp->id, (ulong) scp);
+ return;
+ }
+
+ /*
+ * 'qdonep' contains the command's ending status.
+ */
+ switch (qdonep->d3.done_stat) {
+ case QD_NO_ERROR:
+ ASC_DBG(2, "asc_isr_callback: QD_NO_ERROR\n");
+ scp->result = 0;
+
+ /*
+ * If an INQUIRY command completed successfully, then call
+ * the AscInquiryHandling() function to set-up the device.
+ */
+ if (scp->cmnd[0] == INQUIRY && scp->device->lun == 0 &&
+ (scp->request_bufflen - qdonep->remain_bytes) >= 8)
+ {
+ AscInquiryHandling(asc_dvc_varp, scp->device->id & 0x7,
+ (ASC_SCSI_INQUIRY *) scp->request_buffer);
+ }
+
+ /*
+ * Check for an underrun condition.
+ *
+ * If there was no error and an underrun condition, then
+ * then return the number of underrun bytes.
+ */
+ if (scp->request_bufflen != 0 && qdonep->remain_bytes != 0 &&
+ qdonep->remain_bytes <= scp->request_bufflen) {
+ ASC_DBG1(1, "asc_isr_callback: underrun condition %u bytes\n",
+ (unsigned) qdonep->remain_bytes);
+ scp->resid = qdonep->remain_bytes;
+ }
+ break;
+
+ case QD_WITH_ERROR:
+ ASC_DBG(2, "asc_isr_callback: QD_WITH_ERROR\n");
+ switch (qdonep->d3.host_stat) {
+ case QHSTA_NO_ERROR:
+ if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) {
+ ASC_DBG(2, "asc_isr_callback: SAM_STAT_CHECK_CONDITION\n");
+ ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
+ sizeof(scp->sense_buffer));
+ /*
+ * Note: The 'status_byte()' macro used by target drivers
+ * defined in scsi.h shifts the status byte returned by
+ * host drivers right by 1 bit. This is why target drivers
+ * also use right shifted status byte definitions. For
+ * instance target drivers use CHECK_CONDITION, defined to
+ * 0x1, instead of the SCSI defined check condition value
+ * of 0x2. Host drivers are supposed to return the status
+ * byte as it is defined by SCSI.
+ */
+ scp->result = DRIVER_BYTE(DRIVER_SENSE) |
+ STATUS_BYTE(qdonep->d3.scsi_stat);
+ } else {
+ scp->result = STATUS_BYTE(qdonep->d3.scsi_stat);
+ }
+ break;
+
+ default:
+ /* QHSTA error occurred */
+ ASC_DBG1(1, "asc_isr_callback: host_stat 0x%x\n",
+ qdonep->d3.host_stat);
+ scp->result = HOST_BYTE(DID_BAD_TARGET);
+ break;
+ }
+ break;
+
+ case QD_ABORTED_BY_HOST:
+ ASC_DBG(1, "asc_isr_callback: QD_ABORTED_BY_HOST\n");
+ scp->result = HOST_BYTE(DID_ABORT) | MSG_BYTE(qdonep->d3.scsi_msg) |
+ STATUS_BYTE(qdonep->d3.scsi_stat);
+ break;
+
+ default:
+ ASC_DBG1(1, "asc_isr_callback: done_stat 0x%x\n", qdonep->d3.done_stat);
+ scp->result = HOST_BYTE(DID_ERROR) | MSG_BYTE(qdonep->d3.scsi_msg) |
+ STATUS_BYTE(qdonep->d3.scsi_stat);
+ break;
+ }
+
+ /*
+ * If the 'init_tidmask' bit isn't already set for the target and the
+ * current request finished normally, then set the bit for the target
+ * to indicate that a device is present.
+ */
+ if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 &&
+ qdonep->d3.done_stat == QD_NO_ERROR &&
+ qdonep->d3.host_stat == QHSTA_NO_ERROR) {
+ boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id);
+ }
+
+ /*
+ * Because interrupts may be enabled by the 'struct scsi_cmnd' done
+ * function, add the command to the end of the board's done queue.
+ * The done function for the command will be called from
+ * advansys_interrupt().
+ */
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+
+ return;
+}
+
+/*
+ * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR().
+ *
+ * Callback function for the Wide SCSI Adv Library.
+ */
+STATIC void
+adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
+{
+ asc_board_t *boardp;
+ adv_req_t *reqp;
+ adv_sgblk_t *sgblkp;
+ struct scsi_cmnd *scp;
+ struct Scsi_Host *shp;
+ int i;
+ ADV_DCNT resid_cnt;
+
+
+ ASC_DBG2(1, "adv_isr_callback: adv_dvc_varp 0x%lx, scsiqp 0x%lx\n",
+ (ulong) adv_dvc_varp, (ulong) scsiqp);
+ ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
+
+ /*
+ * Get the adv_req_t structure for the command that has been
+ * completed. The adv_req_t structure actually contains the
+ * completed ADV_SCSI_REQ_Q structure.
+ */
+ reqp = (adv_req_t *) ADV_U32_TO_VADDR(scsiqp->srb_ptr);
+ ASC_DBG1(1, "adv_isr_callback: reqp 0x%lx\n", (ulong) reqp);
+ if (reqp == NULL) {
+ ASC_PRINT("adv_isr_callback: reqp is NULL\n");
+ return;
+ }
+
+ /*
+ * Get the struct scsi_cmnd structure and Scsi_Host structure for the
+ * command that has been completed.
+ *
+ * Note: The adv_req_t request structure and adv_sgblk_t structure,
+ * if any, are dropped, because a board structure pointer can not be
+ * determined.
+ */
+ scp = reqp->cmndp;
+ ASC_DBG1(1, "adv_isr_callback: scp 0x%lx\n", (ulong) scp);
+ if (scp == NULL) {
+ ASC_PRINT("adv_isr_callback: scp is NULL; adv_req_t dropped.\n");
+ return;
+ }
+ ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
+
+ /*
+ * If the request's host pointer is not valid, display a message
+ * and return.
+ */
+ shp = scp->device->host;
+ for (i = 0; i < asc_board_count; i++) {
+ if (asc_host[i] == shp) {
+ break;
+ }
+ }
+ /*
+ * Note: If the host structure is not found, the adv_req_t request
+ * structure and adv_sgblk_t structure, if any, is dropped.
+ */
+ if (i == asc_board_count) {
+ ASC_PRINT2(
+ "adv_isr_callback: scp 0x%lx has bad host pointer, host 0x%lx\n",
+ (ulong) scp, (ulong) shp);
+ return;
+ }
+
+ ASC_STATS(shp, callback);
+ ASC_DBG1(1, "adv_isr_callback: shp 0x%lx\n", (ulong) shp);
+
+ /*
+ * If the request isn't found on the active queue, it may have been
+ * removed to handle a reset request. Display a message and return.
+ *
+ * Note: Because the structure may still be in use don't attempt
+ * to free the adv_req_t and adv_sgblk_t, if any, structures.
+ */
+ boardp = ASC_BOARDP(shp);
+ ASC_ASSERT(adv_dvc_varp == &boardp->dvc_var.adv_dvc_var);
+ if (asc_rmqueue(&boardp->active, scp) == ASC_FALSE) {
+ ASC_PRINT2(
+ "adv_isr_callback: board %d: scp 0x%lx not on active queue\n",
+ boardp->id, (ulong) scp);
+ return;
+ }
+
+ /*
+ * 'done_status' contains the command's ending status.
+ */
+ switch (scsiqp->done_status) {
+ case QD_NO_ERROR:
+ ASC_DBG(2, "adv_isr_callback: QD_NO_ERROR\n");
+ scp->result = 0;
+
+ /*
+ * Check for an underrun condition.
+ *
+ * If there was no error and an underrun condition, then
+ * then return the number of underrun bytes.
+ */
+ resid_cnt = le32_to_cpu(scsiqp->data_cnt);
+ if (scp->request_bufflen != 0 && resid_cnt != 0 &&
+ resid_cnt <= scp->request_bufflen) {
+ ASC_DBG1(1, "adv_isr_callback: underrun condition %lu bytes\n",
+ (ulong) resid_cnt);
+ scp->resid = resid_cnt;
+ }
+ break;
+
+ case QD_WITH_ERROR:
+ ASC_DBG(2, "adv_isr_callback: QD_WITH_ERROR\n");
+ switch (scsiqp->host_status) {
+ case QHSTA_NO_ERROR:
+ if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) {
+ ASC_DBG(2, "adv_isr_callback: SAM_STAT_CHECK_CONDITION\n");
+ ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
+ sizeof(scp->sense_buffer));
+ /*
+ * Note: The 'status_byte()' macro used by target drivers
+ * defined in scsi.h shifts the status byte returned by
+ * host drivers right by 1 bit. This is why target drivers
+ * also use right shifted status byte definitions. For
+ * instance target drivers use CHECK_CONDITION, defined to
+ * 0x1, instead of the SCSI defined check condition value
+ * of 0x2. Host drivers are supposed to return the status
+ * byte as it is defined by SCSI.
+ */
+ scp->result = DRIVER_BYTE(DRIVER_SENSE) |
+ STATUS_BYTE(scsiqp->scsi_status);
+ } else {
+ scp->result = STATUS_BYTE(scsiqp->scsi_status);
+ }
+ break;
+
+ default:
+ /* Some other QHSTA error occurred. */
+ ASC_DBG1(1, "adv_isr_callback: host_status 0x%x\n",
+ scsiqp->host_status);
+ scp->result = HOST_BYTE(DID_BAD_TARGET);
+ break;
+ }
+ break;
+
+ case QD_ABORTED_BY_HOST:
+ ASC_DBG(1, "adv_isr_callback: QD_ABORTED_BY_HOST\n");
+ scp->result = HOST_BYTE(DID_ABORT) | STATUS_BYTE(scsiqp->scsi_status);
+ break;
+
+ default:
+ ASC_DBG1(1, "adv_isr_callback: done_status 0x%x\n", scsiqp->done_status);
+ scp->result = HOST_BYTE(DID_ERROR) | STATUS_BYTE(scsiqp->scsi_status);
+ break;
+ }
+
+ /*
+ * If the 'init_tidmask' bit isn't already set for the target and the
+ * current request finished normally, then set the bit for the target
+ * to indicate that a device is present.
+ */
+ if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 &&
+ scsiqp->done_status == QD_NO_ERROR &&
+ scsiqp->host_status == QHSTA_NO_ERROR) {
+ boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id);
+ }
+
+ /*
+ * Because interrupts may be enabled by the 'struct scsi_cmnd' done
+ * function, add the command to the end of the board's done queue.
+ * The done function for the command will be called from
+ * advansys_interrupt().
+ */
+ asc_enqueue(&boardp->done, scp, ASC_BACK);
+
+ /*
+ * Free all 'adv_sgblk_t' structures allocated for the request.
+ */
+ while ((sgblkp = reqp->sgblkp) != NULL)
+ {
+ /* Remove 'sgblkp' from the request list. */
+ reqp->sgblkp = sgblkp->next_sgblkp;
+
+ /* Add 'sgblkp' to the board free list. */
+ sgblkp->next_sgblkp = boardp->adv_sgblkp;
+ boardp->adv_sgblkp = sgblkp;
+ }
+
+ /*
+ * Free the adv_req_t structure used with the command by adding
+ * it back to the board free list.
+ */
+ reqp->next_reqp = boardp->adv_reqp;
+ boardp->adv_reqp = reqp;
+
+ ASC_DBG(1, "adv_isr_callback: done\n");
+
+ return;
+}
+
+/*
+ * adv_async_callback() - Adv Library asynchronous event callback function.
+ */
+STATIC void
+adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code)
+{
+ switch (code)
+ {
+ case ADV_ASYNC_SCSI_BUS_RESET_DET:
+ /*
+ * The firmware detected a SCSI Bus reset.
+ */
+ ASC_DBG(0, "adv_async_callback: ADV_ASYNC_SCSI_BUS_RESET_DET\n");
+ break;
+
+ case ADV_ASYNC_RDMA_FAILURE:
+ /*
+ * Handle RDMA failure by resetting the SCSI Bus and
+ * possibly the chip if it is unresponsive. Log the error
+ * with a unique code.
+ */
+ ASC_DBG(0, "adv_async_callback: ADV_ASYNC_RDMA_FAILURE\n");
+ AdvResetChipAndSB(adv_dvc_varp);
+ break;
+
+ case ADV_HOST_SCSI_BUS_RESET:
+ /*
+ * Host generated SCSI bus reset occurred.
+ */
+ ASC_DBG(0, "adv_async_callback: ADV_HOST_SCSI_BUS_RESET\n");
+ break;
+
+ default:
+ ASC_DBG1(0, "DvcAsyncCallBack: unknown code 0x%x\n", code);
+ break;
+ }
+}
+
+/*
+ * Add a 'REQP' to the end of specified queue. Set 'tidmask'
+ * to indicate a command is queued for the device.
+ *
+ * 'flag' may be either ASC_FRONT or ASC_BACK.
+ *
+ * 'REQPNEXT(reqp)' returns reqp's next pointer.
+ */
+STATIC void
+asc_enqueue(asc_queue_t *ascq, REQP reqp, int flag)
+{
+ int tid;
+
+ ASC_DBG3(3, "asc_enqueue: ascq 0x%lx, reqp 0x%lx, flag %d\n",
+ (ulong) ascq, (ulong) reqp, flag);
+ ASC_ASSERT(reqp != NULL);
+ ASC_ASSERT(flag == ASC_FRONT || flag == ASC_BACK);
+ tid = REQPTID(reqp);
+ ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID);
+ if (flag == ASC_FRONT) {
+ reqp->host_scribble = (unsigned char *)ascq->q_first[tid];
+ ascq->q_first[tid] = reqp;
+ /* If the queue was empty, set the last pointer. */
+ if (ascq->q_last[tid] == NULL) {
+ ascq->q_last[tid] = reqp;
+ }
+ } else { /* ASC_BACK */
+ if (ascq->q_last[tid] != NULL) {
+ ascq->q_last[tid]->host_scribble = (unsigned char *)reqp;
+ }
+ ascq->q_last[tid] = reqp;
+ reqp->host_scribble = NULL;
+ /* If the queue was empty, set the first pointer. */
+ if (ascq->q_first[tid] == NULL) {
+ ascq->q_first[tid] = reqp;
+ }
+ }
+ /* The queue has at least one entry, set its bit. */
+ ascq->q_tidmask |= ADV_TID_TO_TIDMASK(tid);
+#ifdef ADVANSYS_STATS
+ /* Maintain request queue statistics. */
+ ascq->q_tot_cnt[tid]++;
+ ascq->q_cur_cnt[tid]++;
+ if (ascq->q_cur_cnt[tid] > ascq->q_max_cnt[tid]) {
+ ascq->q_max_cnt[tid] = ascq->q_cur_cnt[tid];
+ ASC_DBG2(2, "asc_enqueue: new q_max_cnt[%d] %d\n",
+ tid, ascq->q_max_cnt[tid]);
+ }
+ REQPTIME(reqp) = REQTIMESTAMP();
+#endif /* ADVANSYS_STATS */
+ ASC_DBG1(3, "asc_enqueue: reqp 0x%lx\n", (ulong) reqp);
+ return;
+}
+
+/*
+ * Return first queued 'REQP' on the specified queue for
+ * the specified target device. Clear the 'tidmask' bit for
+ * the device if no more commands are left queued for it.
+ *
+ * 'REQPNEXT(reqp)' returns reqp's next pointer.
+ */
+STATIC REQP
+asc_dequeue(asc_queue_t *ascq, int tid)
+{
+ REQP reqp;
+
+ ASC_DBG2(3, "asc_dequeue: ascq 0x%lx, tid %d\n", (ulong) ascq, tid);
+ ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID);
+ if ((reqp = ascq->q_first[tid]) != NULL) {
+ ASC_ASSERT(ascq->q_tidmask & ADV_TID_TO_TIDMASK(tid));
+ ascq->q_first[tid] = REQPNEXT(reqp);
+ /* If the queue is empty, clear its bit and the last pointer. */
+ if (ascq->q_first[tid] == NULL) {
+ ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid);
+ ASC_ASSERT(ascq->q_last[tid] == reqp);
+ ascq->q_last[tid] = NULL;
+ }
+#ifdef ADVANSYS_STATS
+ /* Maintain request queue statistics. */
+ ascq->q_cur_cnt[tid]--;
+ ASC_ASSERT(ascq->q_cur_cnt[tid] >= 0);
+ REQTIMESTAT("asc_dequeue", ascq, reqp, tid);
+#endif /* ADVANSYS_STATS */
+ }
+ ASC_DBG1(3, "asc_dequeue: reqp 0x%lx\n", (ulong) reqp);
+ return reqp;
+}
+
+/*
+ * Return a pointer to a singly linked list of all the requests queued
+ * for 'tid' on the 'asc_queue_t' pointed to by 'ascq'.
+ *
+ * If 'lastpp' is not NULL, '*lastpp' will be set to point to the
+ * the last request returned in the singly linked list.
+ *
+ * 'tid' should either be a valid target id or if it is ASC_TID_ALL,
+ * then all queued requests are concatenated into one list and
+ * returned.
+ *
+ * Note: If 'lastpp' is used to append a new list to the end of
+ * an old list, only change the old list last pointer if '*lastpp'
+ * (or the function return value) is not NULL, i.e. use a temporary
+ * variable for 'lastpp' and check its value after the function return
+ * before assigning it to the list last pointer.
+ *
+ * Unfortunately collecting queuing time statistics adds overhead to
+ * the function that isn't inherent to the function's algorithm.
+ */
+STATIC REQP
+asc_dequeue_list(asc_queue_t *ascq, REQP *lastpp, int tid)
+{
+ REQP firstp, lastp;
+ int i;
+
+ ASC_DBG2(3, "asc_dequeue_list: ascq 0x%lx, tid %d\n", (ulong) ascq, tid);
+ ASC_ASSERT((tid == ASC_TID_ALL) || (tid >= 0 && tid <= ADV_MAX_TID));
+
+ /*
+ * If 'tid' is not ASC_TID_ALL, return requests only for
+ * the specified 'tid'. If 'tid' is ASC_TID_ALL, return all
+ * requests for all tids.
+ */
+ if (tid != ASC_TID_ALL) {
+ /* Return all requests for the specified 'tid'. */
+ if ((ascq->q_tidmask & ADV_TID_TO_TIDMASK(tid)) == 0) {
+ /* List is empty; Set first and last return pointers to NULL. */
+ firstp = lastp = NULL;
+ } else {
+ firstp = ascq->q_first[tid];
+ lastp = ascq->q_last[tid];
+ ascq->q_first[tid] = ascq->q_last[tid] = NULL;
+ ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid);
+#ifdef ADVANSYS_STATS
+ {
+ REQP reqp;
+ ascq->q_cur_cnt[tid] = 0;
+ for (reqp = firstp; reqp; reqp = REQPNEXT(reqp)) {
+ REQTIMESTAT("asc_dequeue_list", ascq, reqp, tid);
+ }
+ }
+#endif /* ADVANSYS_STATS */
+ }
+ } else {
+ /* Return all requests for all tids. */
+ firstp = lastp = NULL;
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if (ascq->q_tidmask & ADV_TID_TO_TIDMASK(i)) {
+ if (firstp == NULL) {
+ firstp = ascq->q_first[i];
+ lastp = ascq->q_last[i];
+ } else {
+ ASC_ASSERT(lastp != NULL);
+ lastp->host_scribble = (unsigned char *)ascq->q_first[i];
+ lastp = ascq->q_last[i];
+ }
+ ascq->q_first[i] = ascq->q_last[i] = NULL;
+ ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(i);
+#ifdef ADVANSYS_STATS
+ ascq->q_cur_cnt[i] = 0;
+#endif /* ADVANSYS_STATS */
+ }
+ }
+#ifdef ADVANSYS_STATS
+ {
+ REQP reqp;
+ for (reqp = firstp; reqp; reqp = REQPNEXT(reqp)) {
+ REQTIMESTAT("asc_dequeue_list", ascq, reqp, reqp->device->id);
+ }
+ }
+#endif /* ADVANSYS_STATS */
+ }
+ if (lastpp) {
+ *lastpp = lastp;
+ }
+ ASC_DBG1(3, "asc_dequeue_list: firstp 0x%lx\n", (ulong) firstp);
+ return firstp;
+}
+
+/*
+ * Remove the specified 'REQP' from the specified queue for
+ * the specified target device. Clear the 'tidmask' bit for the
+ * device if no more commands are left queued for it.
+ *
+ * 'REQPNEXT(reqp)' returns reqp's the next pointer.
+ *
+ * Return ASC_TRUE if the command was found and removed,
+ * otherwise return ASC_FALSE.
+ */
+STATIC int
+asc_rmqueue(asc_queue_t *ascq, REQP reqp)
+{
+ REQP currp, prevp;
+ int tid;
+ int ret = ASC_FALSE;
+
+ ASC_DBG2(3, "asc_rmqueue: ascq 0x%lx, reqp 0x%lx\n",
+ (ulong) ascq, (ulong) reqp);
+ ASC_ASSERT(reqp != NULL);
+
+ tid = REQPTID(reqp);
+ ASC_ASSERT(tid >= 0 && tid <= ADV_MAX_TID);
+
+ /*
+ * Handle the common case of 'reqp' being the first
+ * entry on the queue.
+ */
+ if (reqp == ascq->q_first[tid]) {
+ ret = ASC_TRUE;
+ ascq->q_first[tid] = REQPNEXT(reqp);
+ /* If the queue is now empty, clear its bit and the last pointer. */
+ if (ascq->q_first[tid] == NULL) {
+ ascq->q_tidmask &= ~ADV_TID_TO_TIDMASK(tid);
+ ASC_ASSERT(ascq->q_last[tid] == reqp);
+ ascq->q_last[tid] = NULL;
+ }
+ } else if (ascq->q_first[tid] != NULL) {
+ ASC_ASSERT(ascq->q_last[tid] != NULL);
+ /*
+ * Because the case of 'reqp' being the first entry has been
+ * handled above and it is known the queue is not empty, if
+ * 'reqp' is found on the queue it is guaranteed the queue will
+ * not become empty and that 'q_first[tid]' will not be changed.
+ *
+ * Set 'prevp' to the first entry, 'currp' to the second entry,
+ * and search for 'reqp'.
+ */
+ for (prevp = ascq->q_first[tid], currp = REQPNEXT(prevp);
+ currp; prevp = currp, currp = REQPNEXT(currp)) {
+ if (currp == reqp) {
+ ret = ASC_TRUE;
+ prevp->host_scribble = (unsigned char *)REQPNEXT(currp);
+ reqp->host_scribble = NULL;
+ if (ascq->q_last[tid] == reqp) {
+ ascq->q_last[tid] = prevp;
+ }
+ break;
+ }
+ }
+ }
+#ifdef ADVANSYS_STATS
+ /* Maintain request queue statistics. */
+ if (ret == ASC_TRUE) {
+ ascq->q_cur_cnt[tid]--;
+ REQTIMESTAT("asc_rmqueue", ascq, reqp, tid);
+ }
+ ASC_ASSERT(ascq->q_cur_cnt[tid] >= 0);
+#endif /* ADVANSYS_STATS */
+ ASC_DBG2(3, "asc_rmqueue: reqp 0x%lx, ret %d\n", (ulong) reqp, ret);
+ return ret;
+}
+
+/*
+ * Execute as many queued requests as possible for the specified queue.
+ *
+ * Calls asc_execute_scsi_cmnd() to execute a REQP/struct scsi_cmnd.
+ */
+STATIC void
+asc_execute_queue(asc_queue_t *ascq)
+{
+ ADV_SCSI_BIT_ID_TYPE scan_tidmask;
+ REQP reqp;
+ int i;
+
+ ASC_DBG1(1, "asc_execute_queue: ascq 0x%lx\n", (ulong) ascq);
+ /*
+ * Execute queued commands for devices attached to
+ * the current board in round-robin fashion.
+ */
+ scan_tidmask = ascq->q_tidmask;
+ do {
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if (scan_tidmask & ADV_TID_TO_TIDMASK(i)) {
+ if ((reqp = asc_dequeue(ascq, i)) == NULL) {
+ scan_tidmask &= ~ADV_TID_TO_TIDMASK(i);
+ } else if (asc_execute_scsi_cmnd((struct scsi_cmnd *) reqp)
+ == ASC_BUSY) {
+ scan_tidmask &= ~ADV_TID_TO_TIDMASK(i);
+ /*
+ * The request returned ASC_BUSY. Enqueue at the front of
+ * target's waiting list to maintain correct ordering.
+ */
+ asc_enqueue(ascq, reqp, ASC_FRONT);
+ }
+ }
+ }
+ } while (scan_tidmask);
+ return;
+}
+
+#ifdef CONFIG_PROC_FS
+/*
+ * asc_prt_board_devices()
+ *
+ * Print driver information for devices attached to the board.
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_board_devices(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ int leftlen;
+ int totlen;
+ int len;
+ int chip_scsi_id;
+ int i;
+
+ boardp = ASC_BOARDP(shp);
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nDevice Information for AdvanSys SCSI Host %d:\n", shp->host_no);
+ ASC_PRT_NEXT();
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
+ } else {
+ chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
+ }
+
+ len = asc_prt_line(cp, leftlen, "Target IDs Detected:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) {
+ len = asc_prt_line(cp, leftlen, " %X,", i);
+ ASC_PRT_NEXT();
+ }
+ }
+ len = asc_prt_line(cp, leftlen, " (%X=Host Adapter)\n", chip_scsi_id);
+ ASC_PRT_NEXT();
+
+ return totlen;
+}
+
+/*
+ * Display Wide Board BIOS Information.
+ */
+STATIC int
+asc_prt_adv_bios(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ int leftlen;
+ int totlen;
+ int len;
+ ushort major, minor, letter;
+
+ boardp = ASC_BOARDP(shp);
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen, "\nROM BIOS Version: ");
+ ASC_PRT_NEXT();
+
+ /*
+ * If the BIOS saved a valid signature, then fill in
+ * the BIOS code segment base address.
+ */
+ if (boardp->bios_signature != 0x55AA) {
+ len = asc_prt_line(cp, leftlen, "Disabled or Pre-3.1\n");
+ ASC_PRT_NEXT();
+ len = asc_prt_line(cp, leftlen,
+"BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n");
+ ASC_PRT_NEXT();
+ len = asc_prt_line(cp, leftlen,
+"can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
+ ASC_PRT_NEXT();
+ } else {
+ major = (boardp->bios_version >> 12) & 0xF;
+ minor = (boardp->bios_version >> 8) & 0xF;
+ letter = (boardp->bios_version & 0xFF);
+
+ len = asc_prt_line(cp, leftlen, "%d.%d%c\n",
+ major, minor, letter >= 26 ? '?' : letter + 'A');
+ ASC_PRT_NEXT();
+
+ /*
+ * Current available ROM BIOS release is 3.1I for UW
+ * and 3.2I for U2W. This code doesn't differentiate
+ * UW and U2W boards.
+ */
+ if (major < 3 || (major <= 3 && minor < 1) ||
+ (major <= 3 && minor <= 1 && letter < ('I'- 'A'))) {
+ len = asc_prt_line(cp, leftlen,
+"Newer version of ROM BIOS is available at the ConnectCom FTP site:\n");
+ ASC_PRT_NEXT();
+ len = asc_prt_line(cp, leftlen,
+"ftp://ftp.connectcom.net/pub\n");
+ ASC_PRT_NEXT();
+ }
+ }
+
+ return totlen;
+}
+
+/*
+ * Add serial number to information bar if signature AAh
+ * is found in at bit 15-9 (7 bits) of word 1.
+ *
+ * Serial Number consists fo 12 alpha-numeric digits.
+ *
+ * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits)
+ * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits)
+ * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits)
+ * 5 - Product revision (A-J) Word0: " "
+ *
+ * Signature Word1: 15-9 (7 bits)
+ * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit)
+ * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits)
+ *
+ * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits)
+ *
+ * Note 1: Only production cards will have a serial number.
+ *
+ * Note 2: Signature is most significant 7 bits (0xFE).
+ *
+ * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE.
+ */
+STATIC int
+asc_get_eeprom_string(ushort *serialnum, uchar *cp)
+{
+ ushort w, num;
+
+ if ((serialnum[1] & 0xFE00) != ((ushort) 0xAA << 8)) {
+ return ASC_FALSE;
+ } else {
+ /*
+ * First word - 6 digits.
+ */
+ w = serialnum[0];
+
+ /* Product type - 1st digit. */
+ if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') {
+ /* Product type is P=Prototype */
+ *cp += 0x8;
+ }
+ cp++;
+
+ /* Manufacturing location - 2nd digit. */
+ *cp++ = 'A' + ((w & 0x1C00) >> 10);
+
+ /* Product ID - 3rd, 4th digits. */
+ num = w & 0x3FF;
+ *cp++ = '0' + (num / 100);
+ num %= 100;
+ *cp++ = '0' + (num / 10);
+
+ /* Product revision - 5th digit. */
+ *cp++ = 'A' + (num % 10);
+
+ /*
+ * Second word
+ */
+ w = serialnum[1];
+
+ /*
+ * Year - 6th digit.
+ *
+ * If bit 15 of third word is set, then the
+ * last digit of the year is greater than 7.
+ */
+ if (serialnum[2] & 0x8000) {
+ *cp++ = '8' + ((w & 0x1C0) >> 6);
+ } else {
+ *cp++ = '0' + ((w & 0x1C0) >> 6);
+ }
+
+ /* Week of year - 7th, 8th digits. */
+ num = w & 0x003F;
+ *cp++ = '0' + num / 10;
+ num %= 10;
+ *cp++ = '0' + num;
+
+ /*
+ * Third word
+ */
+ w = serialnum[2] & 0x7FFF;
+
+ /* Serial number - 9th digit. */
+ *cp++ = 'A' + (w / 1000);
+
+ /* 10th, 11th, 12th digits. */
+ num = w % 1000;
+ *cp++ = '0' + num / 100;
+ num %= 100;
+ *cp++ = '0' + num / 10;
+ num %= 10;
+ *cp++ = '0' + num;
+
+ *cp = '\0'; /* Null Terminate the string. */
+ return ASC_TRUE;
+ }
+}
+
+/*
+ * asc_prt_asc_board_eeprom()
+ *
+ * Print board EEPROM configuration.
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_asc_board_eeprom(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ ASC_DVC_VAR *asc_dvc_varp;
+ int leftlen;
+ int totlen;
+ int len;
+ ASCEEP_CONFIG *ep;
+ int i;
+#ifdef CONFIG_ISA
+ int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 };
+#endif /* CONFIG_ISA */
+ uchar serialstr[13];
+
+ boardp = ASC_BOARDP(shp);
+ asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+ ep = &boardp->eep_config.asc_eep;
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nEEPROM Settings for AdvanSys SCSI Host %d:\n", shp->host_no);
+ ASC_PRT_NEXT();
+
+ if (asc_get_eeprom_string((ushort *) &ep->adapter_info[0], serialstr) ==
+ ASC_TRUE) {
+ len = asc_prt_line(cp, leftlen, " Serial Number: %s\n", serialstr);
+ ASC_PRT_NEXT();
+ } else {
+ if (ep->adapter_info[5] == 0xBB) {
+ len = asc_prt_line(cp, leftlen,
+ " Default Settings Used for EEPROM-less Adapter.\n");
+ ASC_PRT_NEXT();
+ } else {
+ len = asc_prt_line(cp, leftlen,
+ " Serial Number Signature Not Present.\n");
+ ASC_PRT_NEXT();
+ }
+ }
+
+ len = asc_prt_line(cp, leftlen,
+" Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
+ ASC_EEP_GET_CHIP_ID(ep), ep->max_total_qng, ep->max_tag_qng);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" cntl 0x%x, no_scam 0x%x\n",
+ ep->cntl, ep->no_scam);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Target ID: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %d", i);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Disconnects: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Command Queuing: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Start Motor: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Synchronous Transfer:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+#ifdef CONFIG_ISA
+ if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
+ len = asc_prt_line(cp, leftlen,
+" Host ISA DMA speed: %d MB/S\n",
+ isa_dma_speed[ASC_EEP_GET_DMA_SPD(ep)]);
+ ASC_PRT_NEXT();
+ }
+#endif /* CONFIG_ISA */
+
+ return totlen;
+}
+
+/*
+ * asc_prt_adv_board_eeprom()
+ *
+ * Print board EEPROM configuration.
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_adv_board_eeprom(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ ADV_DVC_VAR *adv_dvc_varp;
+ int leftlen;
+ int totlen;
+ int len;
+ int i;
+ char *termstr;
+ uchar serialstr[13];
+ ADVEEP_3550_CONFIG *ep_3550 = NULL;
+ ADVEEP_38C0800_CONFIG *ep_38C0800 = NULL;
+ ADVEEP_38C1600_CONFIG *ep_38C1600 = NULL;
+ ushort word;
+ ushort *wordp;
+ ushort sdtr_speed = 0;
+
+ boardp = ASC_BOARDP(shp);
+ adv_dvc_varp = &boardp->dvc_var.adv_dvc_var;
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ ep_3550 = &boardp->eep_config.adv_3550_eep;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ ep_38C0800 = &boardp->eep_config.adv_38C0800_eep;
+ } else
+ {
+ ep_38C1600 = &boardp->eep_config.adv_38C1600_eep;
+ }
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nEEPROM Settings for AdvanSys SCSI Host %d:\n", shp->host_no);
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ wordp = &ep_3550->serial_number_word1;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ wordp = &ep_38C0800->serial_number_word1;
+ } else
+ {
+ wordp = &ep_38C1600->serial_number_word1;
+ }
+
+ if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE) {
+ len = asc_prt_line(cp, leftlen, " Serial Number: %s\n", serialstr);
+ ASC_PRT_NEXT();
+ } else {
+ len = asc_prt_line(cp, leftlen,
+ " Serial Number Signature Not Present.\n");
+ ASC_PRT_NEXT();
+ }
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ len = asc_prt_line(cp, leftlen,
+" Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
+ ep_3550->adapter_scsi_id, ep_3550->max_host_qng,
+ ep_3550->max_dvc_qng);
+ ASC_PRT_NEXT();
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ len = asc_prt_line(cp, leftlen,
+" Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
+ ep_38C0800->adapter_scsi_id, ep_38C0800->max_host_qng,
+ ep_38C0800->max_dvc_qng);
+ ASC_PRT_NEXT();
+ } else
+ {
+ len = asc_prt_line(cp, leftlen,
+" Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
+ ep_38C1600->adapter_scsi_id, ep_38C1600->max_host_qng,
+ ep_38C1600->max_dvc_qng);
+ ASC_PRT_NEXT();
+ }
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ word = ep_3550->termination;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ word = ep_38C0800->termination_lvd;
+ } else
+ {
+ word = ep_38C1600->termination_lvd;
+ }
+ switch (word) {
+ case 1:
+ termstr = "Low Off/High Off";
+ break;
+ case 2:
+ termstr = "Low Off/High On";
+ break;
+ case 3:
+ termstr = "Low On/High On";
+ break;
+ default:
+ case 0:
+ termstr = "Automatic";
+ break;
+ }
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ len = asc_prt_line(cp, leftlen,
+" termination: %u (%s), bios_ctrl: 0x%x\n",
+ ep_3550->termination, termstr, ep_3550->bios_ctrl);
+ ASC_PRT_NEXT();
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ len = asc_prt_line(cp, leftlen,
+" termination: %u (%s), bios_ctrl: 0x%x\n",
+ ep_38C0800->termination_lvd, termstr, ep_38C0800->bios_ctrl);
+ ASC_PRT_NEXT();
+ } else
+ {
+ len = asc_prt_line(cp, leftlen,
+" termination: %u (%s), bios_ctrl: 0x%x\n",
+ ep_38C1600->termination_lvd, termstr, ep_38C1600->bios_ctrl);
+ ASC_PRT_NEXT();
+ }
+
+ len = asc_prt_line(cp, leftlen,
+" Target ID: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %X", i);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ word = ep_3550->disc_enable;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ word = ep_38C0800->disc_enable;
+ } else
+ {
+ word = ep_38C1600->disc_enable;
+ }
+ len = asc_prt_line(cp, leftlen,
+" Disconnects: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ word = ep_3550->tagqng_able;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ word = ep_38C0800->tagqng_able;
+ } else
+ {
+ word = ep_38C1600->tagqng_able;
+ }
+ len = asc_prt_line(cp, leftlen,
+" Command Queuing: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ word = ep_3550->start_motor;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ word = ep_38C0800->start_motor;
+ } else
+ {
+ word = ep_38C1600->start_motor;
+ }
+ len = asc_prt_line(cp, leftlen,
+" Start Motor: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ len = asc_prt_line(cp, leftlen,
+" Synchronous Transfer:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+ }
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ len = asc_prt_line(cp, leftlen,
+" Ultra Transfer: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+ }
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
+ {
+ word = ep_3550->wdtr_able;
+ } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ word = ep_38C0800->wdtr_able;
+ } else
+ {
+ word = ep_38C1600->wdtr_able;
+ }
+ len = asc_prt_line(cp, leftlen,
+" Wide Transfer: ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ len = asc_prt_line(cp, leftlen, " %c",
+ (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 ||
+ adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ len = asc_prt_line(cp, leftlen,
+" Synchronous Transfer Speed (Mhz):\n ");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ char *speed_str;
+
+ if (i == 0)
+ {
+ sdtr_speed = adv_dvc_varp->sdtr_speed1;
+ } else if (i == 4)
+ {
+ sdtr_speed = adv_dvc_varp->sdtr_speed2;
+ } else if (i == 8)
+ {
+ sdtr_speed = adv_dvc_varp->sdtr_speed3;
+ } else if (i == 12)
+ {
+ sdtr_speed = adv_dvc_varp->sdtr_speed4;
+ }
+ switch (sdtr_speed & ADV_MAX_TID)
+ {
+ case 0: speed_str = "Off"; break;
+ case 1: speed_str = " 5"; break;
+ case 2: speed_str = " 10"; break;
+ case 3: speed_str = " 20"; break;
+ case 4: speed_str = " 40"; break;
+ case 5: speed_str = " 80"; break;
+ default: speed_str = "Unk"; break;
+ }
+ len = asc_prt_line(cp, leftlen, "%X:%s ", i, speed_str);
+ ASC_PRT_NEXT();
+ if (i == 7)
+ {
+ len = asc_prt_line(cp, leftlen, "\n ");
+ ASC_PRT_NEXT();
+ }
+ sdtr_speed >>= 4;
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+ }
+
+ return totlen;
+}
+
+/*
+ * asc_prt_driver_conf()
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_driver_conf(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ int leftlen;
+ int totlen;
+ int len;
+ int chip_scsi_id;
+
+ boardp = ASC_BOARDP(shp);
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n",
+ shp->host_no);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" host_busy %u, last_reset %u, max_id %u, max_lun %u, max_channel %u\n",
+ shp->host_busy, shp->last_reset, shp->max_id, shp->max_lun,
+ shp->max_channel);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n",
+ shp->unique_id, shp->can_queue, shp->this_id, shp->sg_tablesize,
+ shp->cmd_per_lun);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" unchecked_isa_dma %d, use_clustering %d\n",
+ shp->unchecked_isa_dma, shp->use_clustering);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" flags 0x%x, last_reset 0x%x, jiffies 0x%x, asc_n_io_port 0x%x\n",
+ boardp->flags, boardp->last_reset, jiffies, boardp->asc_n_io_port);
+ ASC_PRT_NEXT();
+
+ /* 'shp->n_io_port' may be truncated because it is only one byte. */
+ len = asc_prt_line(cp, leftlen,
+" io_port 0x%x, n_io_port 0x%x\n",
+ shp->io_port, shp->n_io_port);
+ ASC_PRT_NEXT();
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
+ } else {
+ chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
+ }
+
+ return totlen;
+}
+
+/*
+ * asc_prt_asc_board_info()
+ *
+ * Print dynamic board configuration information.
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_asc_board_info(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ int chip_scsi_id;
+ int leftlen;
+ int totlen;
+ int len;
+ ASC_DVC_VAR *v;
+ ASC_DVC_CFG *c;
+ int i;
+ int renegotiate = 0;
+
+ boardp = ASC_BOARDP(shp);
+ v = &boardp->dvc_var.asc_dvc_var;
+ c = &boardp->dvc_cfg.asc_dvc_cfg;
+ chip_scsi_id = c->chip_scsi_id;
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n",
+ shp->host_no);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" chip_version %u, lib_version 0x%x, lib_serial_no %u, mcode_date 0x%x\n",
+ c->chip_version, c->lib_version, c->lib_serial_no, c->mcode_date);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" mcode_version 0x%x, err_code %u\n",
+ c->mcode_version, v->err_code);
+ ASC_PRT_NEXT();
+
+ /* Current number of commands waiting for the host. */
+ len = asc_prt_line(cp, leftlen,
+" Total Command Pending: %d\n", v->cur_total_qng);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Command Queuing:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+ len = asc_prt_line(cp, leftlen, " %X:%c",
+ i, (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ /* Current number of commands waiting for a device. */
+ len = asc_prt_line(cp, leftlen,
+" Command Queue Pending:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+ len = asc_prt_line(cp, leftlen, " %X:%u", i, v->cur_dvc_qng[i]);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ /* Current limit on number of commands that can be sent to a device. */
+ len = asc_prt_line(cp, leftlen,
+" Command Queue Limit:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+ len = asc_prt_line(cp, leftlen, " %X:%u", i, v->max_dvc_qng[i]);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ /* Indicate whether the device has returned queue full status. */
+ len = asc_prt_line(cp, leftlen,
+" Command Queue Full:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+ if (boardp->queue_full & ADV_TID_TO_TIDMASK(i)) {
+ len = asc_prt_line(cp, leftlen, " %X:Y-%d",
+ i, boardp->queue_full_cnt[i]);
+ } else {
+ len = asc_prt_line(cp, leftlen, " %X:N", i);
+ }
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Synchronous Transfer:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+ len = asc_prt_line(cp, leftlen, " %X:%c",
+ i, (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ uchar syn_period_ix;
+
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) ||
+ ((v->init_sdtr & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ len = asc_prt_line(cp, leftlen, " %X:", i);
+ ASC_PRT_NEXT();
+
+ if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0)
+ {
+ len = asc_prt_line(cp, leftlen, " Asynchronous");
+ ASC_PRT_NEXT();
+ } else
+ {
+ syn_period_ix =
+ (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - 1);
+
+ len = asc_prt_line(cp, leftlen,
+ " Transfer Period Factor: %d (%d.%d Mhz),",
+ v->sdtr_period_tbl[syn_period_ix],
+ 250 / v->sdtr_period_tbl[syn_period_ix],
+ ASC_TENTHS(250, v->sdtr_period_tbl[syn_period_ix]));
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen, " REQ/ACK Offset: %d",
+ boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET);
+ ASC_PRT_NEXT();
+ }
+
+ if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
+ len = asc_prt_line(cp, leftlen, "*\n");
+ renegotiate = 1;
+ } else
+ {
+ len = asc_prt_line(cp, leftlen, "\n");
+ }
+ ASC_PRT_NEXT();
+ }
+
+ if (renegotiate)
+ {
+ len = asc_prt_line(cp, leftlen,
+ " * = Re-negotiation pending before next command.\n");
+ ASC_PRT_NEXT();
+ }
+
+ return totlen;
+}
+
+/*
+ * asc_prt_adv_board_info()
+ *
+ * Print dynamic board configuration information.
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_adv_board_info(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ asc_board_t *boardp;
+ int leftlen;
+ int totlen;
+ int len;
+ int i;
+ ADV_DVC_VAR *v;
+ ADV_DVC_CFG *c;
+ AdvPortAddr iop_base;
+ ushort chip_scsi_id;
+ ushort lramword;
+ uchar lrambyte;
+ ushort tagqng_able;
+ ushort sdtr_able, wdtr_able;
+ ushort wdtr_done, sdtr_done;
+ ushort period = 0;
+ int renegotiate = 0;
+
+ boardp = ASC_BOARDP(shp);
+ v = &boardp->dvc_var.adv_dvc_var;
+ c = &boardp->dvc_cfg.adv_dvc_cfg;
+ iop_base = v->iop_base;
+ chip_scsi_id = v->chip_scsi_id;
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ len = asc_prt_line(cp, leftlen,
+"\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n",
+ shp->host_no);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" iop_base 0x%lx, cable_detect: %X, err_code %u\n",
+ v->iop_base,
+ AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1) & CABLE_DETECT,
+ v->err_code);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" chip_version %u, lib_version 0x%x, mcode_date 0x%x, mcode_version 0x%x\n",
+ c->chip_version, c->lib_version, c->mcode_date, c->mcode_version);
+ ASC_PRT_NEXT();
+
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ len = asc_prt_line(cp, leftlen,
+" Queuing Enabled:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ len = asc_prt_line(cp, leftlen, " %X:%c",
+ i, (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Queue Limit:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i, lrambyte);
+
+ len = asc_prt_line(cp, leftlen, " %X:%d", i, lrambyte);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" Command Pending:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i, lrambyte);
+
+ len = asc_prt_line(cp, leftlen, " %X:%d", i, lrambyte);
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ len = asc_prt_line(cp, leftlen,
+" Wide Enabled:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ len = asc_prt_line(cp, leftlen, " %X:%c",
+ i, (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done);
+ len = asc_prt_line(cp, leftlen,
+" Transfer Bit Width:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ AdvReadWordLram(iop_base, ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),
+ lramword);
+
+ len = asc_prt_line(cp, leftlen, " %X:%d",
+ i, (lramword & 0x8000) ? 16 : 8);
+ ASC_PRT_NEXT();
+
+ if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) &&
+ (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
+ len = asc_prt_line(cp, leftlen, "*");
+ ASC_PRT_NEXT();
+ renegotiate = 1;
+ }
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ len = asc_prt_line(cp, leftlen,
+" Synchronous Enabled:");
+ ASC_PRT_NEXT();
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ len = asc_prt_line(cp, leftlen, " %X:%c",
+ i, (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
+ ASC_PRT_NEXT();
+ }
+ len = asc_prt_line(cp, leftlen, "\n");
+ ASC_PRT_NEXT();
+
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done);
+ for (i = 0; i <= ADV_MAX_TID; i++) {
+
+ AdvReadWordLram(iop_base, ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i),
+ lramword);
+ lramword &= ~0x8000;
+
+ if ((chip_scsi_id == i) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) ||
+ ((sdtr_able & ADV_TID_TO_TIDMASK(i)) == 0)) {
+ continue;
+ }
+
+ len = asc_prt_line(cp, leftlen, " %X:", i);
+ ASC_PRT_NEXT();
+
+ if ((lramword & 0x1F) == 0) /* Check for REQ/ACK Offset 0. */
+ {
+ len = asc_prt_line(cp, leftlen, " Asynchronous");
+ ASC_PRT_NEXT();
+ } else
+ {
+ len = asc_prt_line(cp, leftlen, " Transfer Period Factor: ");
+ ASC_PRT_NEXT();
+
+ if ((lramword & 0x1F00) == 0x1100) /* 80 Mhz */
+ {
+ len = asc_prt_line(cp, leftlen, "9 (80.0 Mhz),");
+ ASC_PRT_NEXT();
+ } else if ((lramword & 0x1F00) == 0x1000) /* 40 Mhz */
+ {
+ len = asc_prt_line(cp, leftlen, "10 (40.0 Mhz),");
+ ASC_PRT_NEXT();
+ } else /* 20 Mhz or below. */
+ {
+ period = (((lramword >> 8) * 25) + 50)/4;
+
+ if (period == 0) /* Should never happen. */
+ {
+ len = asc_prt_line(cp, leftlen, "%d (? Mhz), ");
+ ASC_PRT_NEXT();
+ } else
+ {
+ len = asc_prt_line(cp, leftlen,
+ "%d (%d.%d Mhz),",
+ period, 250/period, ASC_TENTHS(250, period));
+ ASC_PRT_NEXT();
+ }
+ }
+
+ len = asc_prt_line(cp, leftlen, " REQ/ACK Offset: %d",
+ lramword & 0x1F);
+ ASC_PRT_NEXT();
+ }
+
+ if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
+ len = asc_prt_line(cp, leftlen, "*\n");
+ renegotiate = 1;
+ } else
+ {
+ len = asc_prt_line(cp, leftlen, "\n");
+ }
+ ASC_PRT_NEXT();
+ }
+
+ if (renegotiate)
+ {
+ len = asc_prt_line(cp, leftlen,
+ " * = Re-negotiation pending before next command.\n");
+ ASC_PRT_NEXT();
+ }
+
+ return totlen;
+}
+
+/*
+ * asc_proc_copy()
+ *
+ * Copy proc information to a read buffer taking into account the current
+ * read offset in the file and the remaining space in the read buffer.
+ */
+STATIC int
+asc_proc_copy(off_t advoffset, off_t offset, char *curbuf, int leftlen,
+ char *cp, int cplen)
+{
+ int cnt = 0;
+
+ ASC_DBG3(2, "asc_proc_copy: offset %d, advoffset %d, cplen %d\n",
+ (unsigned) offset, (unsigned) advoffset, cplen);
+ if (offset <= advoffset) {
+ /* Read offset below current offset, copy everything. */
+ cnt = min(cplen, leftlen);
+ ASC_DBG3(2, "asc_proc_copy: curbuf 0x%lx, cp 0x%lx, cnt %d\n",
+ (ulong) curbuf, (ulong) cp, cnt);
+ memcpy(curbuf, cp, cnt);
+ } else if (offset < advoffset + cplen) {
+ /* Read offset within current range, partial copy. */
+ cnt = (advoffset + cplen) - offset;
+ cp = (cp + cplen) - cnt;
+ cnt = min(cnt, leftlen);
+ ASC_DBG3(2, "asc_proc_copy: curbuf 0x%lx, cp 0x%lx, cnt %d\n",
+ (ulong) curbuf, (ulong) cp, cnt);
+ memcpy(curbuf, cp, cnt);
+ }
+ return cnt;
+}
+
+/*
+ * asc_prt_line()
+ *
+ * If 'cp' is NULL print to the console, otherwise print to a buffer.
+ *
+ * Return 0 if printing to the console, otherwise return the number of
+ * bytes written to the buffer.
+ *
+ * Note: If any single line is greater than ASC_PRTLINE_SIZE bytes the stack
+ * will be corrupted. 's[]' is defined to be ASC_PRTLINE_SIZE bytes.
+ */
+STATIC int
+asc_prt_line(char *buf, int buflen, char *fmt, ...)
+{
+ va_list args;
+ int ret;
+ char s[ASC_PRTLINE_SIZE];
+
+ va_start(args, fmt);
+ ret = vsprintf(s, fmt, args);
+ ASC_ASSERT(ret < ASC_PRTLINE_SIZE);
+ if (buf == NULL) {
+ (void) printk(s);
+ ret = 0;
+ } else {
+ ret = min(buflen, ret);
+ memcpy(buf, s, ret);
+ }
+ va_end(args);
+ return ret;
+}
+#endif /* CONFIG_PROC_FS */
+
+
+/*
+ * --- Functions Required by the Asc Library
+ */
+
+/*
+ * Delay for 'n' milliseconds. Don't use the 'jiffies'
+ * global variable which is incremented once every 5 ms
+ * from a timer interrupt, because this function may be
+ * called when interrupts are disabled.
+ */
+STATIC void
+DvcSleepMilliSecond(ADV_DCNT n)
+{
+ ASC_DBG1(4, "DvcSleepMilliSecond: %lu\n", (ulong) n);
+ mdelay(n);
+}
+
+/*
+ * Currently and inline noop but leave as a placeholder.
+ * Leave DvcEnterCritical() as a noop placeholder.
+ */
+STATIC inline ulong
+DvcEnterCritical(void)
+{
+ return 0;
+}
+
+/*
+ * Critical sections are all protected by the board spinlock.
+ * Leave DvcLeaveCritical() as a noop placeholder.
+ */
+STATIC inline void
+DvcLeaveCritical(ulong flags)
+{
+ return;
+}
+
+/*
+ * void
+ * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words)
+ *
+ * Calling/Exit State:
+ * none
+ *
+ * Description:
+ * Output an ASC_SCSI_Q structure to the chip
+ */
+STATIC void
+DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words)
+{
+ int i;
+
+ ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", outbuf, 2 * words);
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < 2 * words; i += 2) {
+ if (i == 4 || i == 20) {
+ continue;
+ }
+ outpw(iop_base + IOP_RAM_DATA,
+ ((ushort) outbuf[i + 1] << 8) | outbuf[i]);
+ }
+}
+
+/*
+ * void
+ * DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
+ *
+ * Calling/Exit State:
+ * none
+ *
+ * Description:
+ * Input an ASC_QDONE_INFO structure from the chip
+ */
+STATIC void
+DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
+{
+ int i;
+ ushort word;
+
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < 2 * words; i += 2) {
+ if (i == 10) {
+ continue;
+ }
+ word = inpw(iop_base + IOP_RAM_DATA);
+ inbuf[i] = word & 0xff;
+ inbuf[i + 1] = (word >> 8) & 0xff;
+ }
+ ASC_DBG_PRT_HEX(2, "DvcGetQinfo", inbuf, 2 * words);
+}
+
+/*
+ * Read a PCI configuration byte.
+ */
+STATIC uchar __init
+DvcReadPCIConfigByte(
+ ASC_DVC_VAR *asc_dvc,
+ ushort offset)
+{
+#ifdef CONFIG_PCI
+ uchar byte_data;
+ pci_read_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, &byte_data);
+ return byte_data;
+#else /* !defined(CONFIG_PCI) */
+ return 0;
+#endif /* !defined(CONFIG_PCI) */
+}
+
+/*
+ * Write a PCI configuration byte.
+ */
+STATIC void __init
+DvcWritePCIConfigByte(
+ ASC_DVC_VAR *asc_dvc,
+ ushort offset,
+ uchar byte_data)
+{
+#ifdef CONFIG_PCI
+ pci_write_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, byte_data);
+#endif /* CONFIG_PCI */
+}
+
+/*
+ * Return the BIOS address of the adapter at the specified
+ * I/O port and with the specified bus type.
+ */
+STATIC ushort __init
+AscGetChipBiosAddress(
+ PortAddr iop_base,
+ ushort bus_type)
+{
+ ushort cfg_lsw;
+ ushort bios_addr;
+
+ /*
+ * The PCI BIOS is re-located by the motherboard BIOS. Because
+ * of this the driver can not determine where a PCI BIOS is
+ * loaded and executes.
+ */
+ if (bus_type & ASC_IS_PCI)
+ {
+ return(0);
+ }
+
+#ifdef CONFIG_ISA
+ if((bus_type & ASC_IS_EISA) != 0)
+ {
+ cfg_lsw = AscGetEisaChipCfg(iop_base);
+ cfg_lsw &= 0x000F;
+ bios_addr = (ushort)(ASC_BIOS_MIN_ADDR +
+ (cfg_lsw * ASC_BIOS_BANK_SIZE));
+ return(bios_addr);
+ }/* if */
+#endif /* CONFIG_ISA */
+
+ cfg_lsw = AscGetChipCfgLsw(iop_base);
+
+ /*
+ * ISA PnP uses the top bit as the 32K BIOS flag
+ */
+ if (bus_type == ASC_IS_ISAPNP)
+ {
+ cfg_lsw &= 0x7FFF;
+ }/* if */
+
+ bios_addr = (ushort)(((cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE) +
+ ASC_BIOS_MIN_ADDR);
+ return(bios_addr);
+}
+
+
+/*
+ * --- Functions Required by the Adv Library
+ */
+
+/*
+ * DvcGetPhyAddr()
+ *
+ * Return the physical address of 'vaddr' and set '*lenp' to the
+ * number of physically contiguous bytes that follow 'vaddr'.
+ * 'flag' indicates the type of structure whose physical address
+ * is being translated.
+ *
+ * Note: Because Linux currently doesn't page the kernel and all
+ * kernel buffers are physically contiguous, leave '*lenp' unchanged.
+ */
+ADV_PADDR
+DvcGetPhyAddr(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq,
+ uchar *vaddr, ADV_SDCNT *lenp, int flag)
+{
+ ADV_PADDR paddr;
+
+ paddr = virt_to_bus(vaddr);
+
+ ASC_DBG4(4,
+ "DvcGetPhyAddr: vaddr 0x%lx, lenp 0x%lx *lenp %lu, paddr 0x%lx\n",
+ (ulong) vaddr, (ulong) lenp, (ulong) *((ulong *) lenp), (ulong) paddr);
+
+ return paddr;
+}
+
+/*
+ * Read a PCI configuration byte.
+ */
+STATIC uchar __init
+DvcAdvReadPCIConfigByte(
+ ADV_DVC_VAR *asc_dvc,
+ ushort offset)
+{
+#ifdef CONFIG_PCI
+ uchar byte_data;
+ pci_read_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, &byte_data);
+ return byte_data;
+#else /* CONFIG_PCI */
+ return 0;
+#endif /* CONFIG_PCI */
+}
+
+/*
+ * Write a PCI configuration byte.
+ */
+STATIC void __init
+DvcAdvWritePCIConfigByte(
+ ADV_DVC_VAR *asc_dvc,
+ ushort offset,
+ uchar byte_data)
+{
+#ifdef CONFIG_PCI
+ pci_write_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, byte_data);
+#else /* CONFIG_PCI */
+ return;
+#endif /* CONFIG_PCI */
+}
+
+/*
+ * --- Tracing and Debugging Functions
+ */
+
+#ifdef ADVANSYS_STATS
+#ifdef CONFIG_PROC_FS
+/*
+ * asc_prt_board_stats()
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_board_stats(struct Scsi_Host *shp, char *cp, int cplen)
+{
+ int leftlen;
+ int totlen;
+ int len;
+ struct asc_stats *s;
+ asc_board_t *boardp;
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ boardp = ASC_BOARDP(shp);
+ s = &boardp->asc_stats;
+
+ len = asc_prt_line(cp, leftlen,
+"\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n", shp->host_no);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" queuecommand %lu, reset %lu, biosparam %lu, interrupt %lu\n",
+ s->queuecommand, s->reset, s->biosparam, s->interrupt);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" callback %lu, done %lu, build_error %lu, build_noreq %lu, build_nosg %lu\n",
+ s->callback, s->done, s->build_error, s->adv_build_noreq,
+ s->adv_build_nosg);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" exe_noerror %lu, exe_busy %lu, exe_error %lu, exe_unknown %lu\n",
+ s->exe_noerror, s->exe_busy, s->exe_error, s->exe_unknown);
+ ASC_PRT_NEXT();
+
+ /*
+ * Display data transfer statistics.
+ */
+ if (s->cont_cnt > 0) {
+ len = asc_prt_line(cp, leftlen, " cont_cnt %lu, ", s->cont_cnt);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen, "cont_xfer %lu.%01lu kb ",
+ s->cont_xfer/2,
+ ASC_TENTHS(s->cont_xfer, 2));
+ ASC_PRT_NEXT();
+
+ /* Contiguous transfer average size */
+ len = asc_prt_line(cp, leftlen, "avg_xfer %lu.%01lu kb\n",
+ (s->cont_xfer/2)/s->cont_cnt,
+ ASC_TENTHS((s->cont_xfer/2), s->cont_cnt));
+ ASC_PRT_NEXT();
+ }
+
+ if (s->sg_cnt > 0) {
+
+ len = asc_prt_line(cp, leftlen, " sg_cnt %lu, sg_elem %lu, ",
+ s->sg_cnt, s->sg_elem);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen, "sg_xfer %lu.%01lu kb\n",
+ s->sg_xfer/2,
+ ASC_TENTHS(s->sg_xfer, 2));
+ ASC_PRT_NEXT();
+
+ /* Scatter gather transfer statistics */
+ len = asc_prt_line(cp, leftlen, " avg_num_elem %lu.%01lu, ",
+ s->sg_elem/s->sg_cnt,
+ ASC_TENTHS(s->sg_elem, s->sg_cnt));
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen, "avg_elem_size %lu.%01lu kb, ",
+ (s->sg_xfer/2)/s->sg_elem,
+ ASC_TENTHS((s->sg_xfer/2), s->sg_elem));
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen, "avg_xfer_size %lu.%01lu kb\n",
+ (s->sg_xfer/2)/s->sg_cnt,
+ ASC_TENTHS((s->sg_xfer/2), s->sg_cnt));
+ ASC_PRT_NEXT();
+ }
+
+ /*
+ * Display request queuing statistics.
+ */
+ len = asc_prt_line(cp, leftlen,
+" Active and Waiting Request Queues (Time Unit: %d HZ):\n", HZ);
+ ASC_PRT_NEXT();
+
+
+ return totlen;
+}
+
+/*
+ * asc_prt_target_stats()
+ *
+ * Note: no single line should be greater than ASC_PRTLINE_SIZE,
+ * cf. asc_prt_line().
+ *
+ * This is separated from asc_prt_board_stats because a full set
+ * of targets will overflow ASC_PRTBUF_SIZE.
+ *
+ * Return the number of characters copied into 'cp'. No more than
+ * 'cplen' characters will be copied to 'cp'.
+ */
+STATIC int
+asc_prt_target_stats(struct Scsi_Host *shp, int tgt_id, char *cp, int cplen)
+{
+ int leftlen;
+ int totlen;
+ int len;
+ struct asc_stats *s;
+ ushort chip_scsi_id;
+ asc_board_t *boardp;
+ asc_queue_t *active;
+ asc_queue_t *waiting;
+
+ leftlen = cplen;
+ totlen = len = 0;
+
+ boardp = ASC_BOARDP(shp);
+ s = &boardp->asc_stats;
+
+ active = &ASC_BOARDP(shp)->active;
+ waiting = &ASC_BOARDP(shp)->waiting;
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
+ } else {
+ chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
+ }
+
+ if ((chip_scsi_id == tgt_id) ||
+ ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(tgt_id)) == 0)) {
+ return 0;
+ }
+
+ do {
+ if (active->q_tot_cnt[tgt_id] > 0 || waiting->q_tot_cnt[tgt_id] > 0) {
+ len = asc_prt_line(cp, leftlen, " target %d\n", tgt_id);
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" active: cnt [cur %d, max %d, tot %u], time [min %d, max %d, avg %lu.%01lu]\n",
+ active->q_cur_cnt[tgt_id], active->q_max_cnt[tgt_id],
+ active->q_tot_cnt[tgt_id],
+ active->q_min_tim[tgt_id], active->q_max_tim[tgt_id],
+ (active->q_tot_cnt[tgt_id] == 0) ? 0 :
+ (active->q_tot_tim[tgt_id]/active->q_tot_cnt[tgt_id]),
+ (active->q_tot_cnt[tgt_id] == 0) ? 0 :
+ ASC_TENTHS(active->q_tot_tim[tgt_id],
+ active->q_tot_cnt[tgt_id]));
+ ASC_PRT_NEXT();
+
+ len = asc_prt_line(cp, leftlen,
+" waiting: cnt [cur %d, max %d, tot %u], time [min %u, max %u, avg %lu.%01lu]\n",
+ waiting->q_cur_cnt[tgt_id], waiting->q_max_cnt[tgt_id],
+ waiting->q_tot_cnt[tgt_id],
+ waiting->q_min_tim[tgt_id], waiting->q_max_tim[tgt_id],
+ (waiting->q_tot_cnt[tgt_id] == 0) ? 0 :
+ (waiting->q_tot_tim[tgt_id]/waiting->q_tot_cnt[tgt_id]),
+ (waiting->q_tot_cnt[tgt_id] == 0) ? 0 :
+ ASC_TENTHS(waiting->q_tot_tim[tgt_id],
+ waiting->q_tot_cnt[tgt_id]));
+ ASC_PRT_NEXT();
+ }
+ } while (0);
+
+ return totlen;
+}
+#endif /* CONFIG_PROC_FS */
+#endif /* ADVANSYS_STATS */
+
+#ifdef ADVANSYS_DEBUG
+/*
+ * asc_prt_scsi_host()
+ */
+STATIC void
+asc_prt_scsi_host(struct Scsi_Host *s)
+{
+ asc_board_t *boardp;
+
+ boardp = ASC_BOARDP(s);
+
+ printk("Scsi_Host at addr 0x%lx\n", (ulong) s);
+ printk(
+" host_busy %u, host_no %d, last_reset %d,\n",
+ s->host_busy, s->host_no,
+ (unsigned) s->last_reset);
+
+ printk(
+" base 0x%lx, io_port 0x%lx, n_io_port %u, irq 0x%x,\n",
+ (ulong) s->base, (ulong) s->io_port, s->n_io_port, s->irq);
+
+ printk(
+" dma_channel %d, this_id %d, can_queue %d,\n",
+ s->dma_channel, s->this_id, s->can_queue);
+
+ printk(
+" cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d\n",
+ s->cmd_per_lun, s->sg_tablesize, s->unchecked_isa_dma);
+
+ if (ASC_NARROW_BOARD(boardp)) {
+ asc_prt_asc_dvc_var(&ASC_BOARDP(s)->dvc_var.asc_dvc_var);
+ asc_prt_asc_dvc_cfg(&ASC_BOARDP(s)->dvc_cfg.asc_dvc_cfg);
+ } else {
+ asc_prt_adv_dvc_var(&ASC_BOARDP(s)->dvc_var.adv_dvc_var);
+ asc_prt_adv_dvc_cfg(&ASC_BOARDP(s)->dvc_cfg.adv_dvc_cfg);
+ }
+}
+
+/*
+ * asc_prt_scsi_cmnd()
+ */
+STATIC void
+asc_prt_scsi_cmnd(struct scsi_cmnd *s)
+{
+ printk("struct scsi_cmnd at addr 0x%lx\n", (ulong) s);
+
+ printk(
+" host 0x%lx, device 0x%lx, target %u, lun %u, channel %u,\n",
+ (ulong) s->device->host, (ulong) s->device, s->device->id, s->device->lun,
+ s->device->channel);
+
+ asc_prt_hex(" CDB", s->cmnd, s->cmd_len);
+
+ printk (
+"sc_data_direction %u, resid %d\n",
+ s->sc_data_direction, s->resid);
+
+ printk(
+" use_sg %u, sglist_len %u, abort_reason 0x%x\n",
+ s->use_sg, s->sglist_len, s->abort_reason);
+
+ printk(
+" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n",
+ (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout,
+ s->retries, s->allowed);
+
+ printk(
+" timeout_per_command %d, timeout_total %d, timeout %d\n",
+ s->timeout_per_command, s->timeout_total, s->timeout);
+
+ printk(" internal_timeout %u\n", s->internal_timeout);
+
+ printk(
+" scsi_done 0x%lx, done 0x%lx, host_scribble 0x%lx, result 0x%x\n",
+ (ulong) s->scsi_done, (ulong) s->done,
+ (ulong) s->host_scribble, s->result);
+
+ printk(
+" tag %u, pid %u\n",
+ (unsigned) s->tag, (unsigned) s->pid);
+}
+
+/*
+ * asc_prt_asc_dvc_var()
+ */
+STATIC void
+asc_prt_asc_dvc_var(ASC_DVC_VAR *h)
+{
+ printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong) h);
+
+ printk(
+" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl %d,\n",
+ h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl);
+
+ printk(
+" bus_type %d, isr_callback 0x%lx, exe_callback 0x%lx, init_sdtr 0x%x,\n",
+ h->bus_type, (ulong) h->isr_callback, (ulong) h->exe_callback,
+ (unsigned) h->init_sdtr);
+
+ printk(
+" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, chip_no 0x%x,\n",
+ (unsigned) h->sdtr_done, (unsigned) h->use_tagged_qng,
+ (unsigned) h->unit_not_ready, (unsigned) h->chip_no);
+
+ printk(
+" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait %u,\n",
+ (unsigned) h->queue_full_or_busy, (unsigned) h->start_motor,
+ (unsigned) h->scsi_reset_wait);
+
+ printk(
+" is_in_int %u, max_total_qng %u, cur_total_qng %u, in_critical_cnt %u,\n",
+ (unsigned) h->is_in_int, (unsigned) h->max_total_qng,
+ (unsigned) h->cur_total_qng, (unsigned) h->in_critical_cnt);
+
+ printk(
+" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, pci_fix_asyn_xfer 0x%x,\n",
+ (unsigned) h->last_q_shortage, (unsigned) h->init_state,
+ (unsigned) h->no_scam, (unsigned) h->pci_fix_asyn_xfer);
+
+ printk(
+" cfg 0x%lx, irq_no 0x%x\n",
+ (ulong) h->cfg, (unsigned) h->irq_no);
+}
+
+/*
+ * asc_prt_asc_dvc_cfg()
+ */
+STATIC void
+asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h)
+{
+ printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong) h);
+
+ printk(
+" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n",
+ h->can_tagged_qng, h->cmd_qng_enabled);
+ printk(
+" disc_enable 0x%x, sdtr_enable 0x%x,\n",
+ h->disc_enable, h->sdtr_enable);
+
+ printk(
+" chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, chip_version %d,\n",
+ h->chip_scsi_id, h->isa_dma_speed, h->isa_dma_channel,
+ h->chip_version);
+
+ printk(
+" pci_device_id %d, lib_serial_no %u, lib_version %u, mcode_date 0x%x,\n",
+ to_pci_dev(h->dev)->device, h->lib_serial_no, h->lib_version,
+ h->mcode_date);
+
+ printk(
+" mcode_version %d, overrun_buf 0x%lx\n",
+ h->mcode_version, (ulong) h->overrun_buf);
+}
+
+/*
+ * asc_prt_asc_scsi_q()
+ */
+STATIC void
+asc_prt_asc_scsi_q(ASC_SCSI_Q *q)
+{
+ ASC_SG_HEAD *sgp;
+ int i;
+
+ printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong) q);
+
+ printk(
+" target_ix 0x%x, target_lun %u, srb_ptr 0x%lx, tag_code 0x%x,\n",
+ q->q2.target_ix, q->q1.target_lun,
+ (ulong) q->q2.srb_ptr, q->q2.tag_code);
+
+ printk(
+" data_addr 0x%lx, data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
+ (ulong) le32_to_cpu(q->q1.data_addr),
+ (ulong) le32_to_cpu(q->q1.data_cnt),
+ (ulong) le32_to_cpu(q->q1.sense_addr), q->q1.sense_len);
+
+ printk(
+" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n",
+ (ulong) q->cdbptr, q->q2.cdb_len,
+ (ulong) q->sg_head, q->q1.sg_queue_cnt);
+
+ if (q->sg_head) {
+ sgp = q->sg_head;
+ printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong) sgp);
+ printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, sgp->queue_cnt);
+ for (i = 0; i < sgp->entry_cnt; i++) {
+ printk(" [%u]: addr 0x%lx, bytes %lu\n",
+ i, (ulong) le32_to_cpu(sgp->sg_list[i].addr),
+ (ulong) le32_to_cpu(sgp->sg_list[i].bytes));
+ }
+
+ }
+}
+
+/*
+ * asc_prt_asc_qdone_info()
+ */
+STATIC void
+asc_prt_asc_qdone_info(ASC_QDONE_INFO *q)
+{
+ printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong) q);
+ printk(
+" srb_ptr 0x%lx, target_ix %u, cdb_len %u, tag_code %u,\n",
+ (ulong) q->d2.srb_ptr, q->d2.target_ix, q->d2.cdb_len,
+ q->d2.tag_code);
+ printk(
+" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n",
+ q->d3.done_stat, q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg);
+}
+
+/*
+ * asc_prt_adv_dvc_var()
+ *
+ * Display an ADV_DVC_VAR structure.
+ */
+STATIC void
+asc_prt_adv_dvc_var(ADV_DVC_VAR *h)
+{
+ printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong) h);
+
+ printk(
+" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n",
+ (ulong) h->iop_base, h->err_code, (unsigned) h->ultra_able);
+
+ printk(
+" isr_callback 0x%lx, sdtr_able 0x%x, wdtr_able 0x%x\n",
+ (ulong) h->isr_callback, (unsigned) h->sdtr_able,
+ (unsigned) h->wdtr_able);
+
+ printk(
+" start_motor 0x%x, scsi_reset_wait 0x%x, irq_no 0x%x,\n",
+ (unsigned) h->start_motor,
+ (unsigned) h->scsi_reset_wait, (unsigned) h->irq_no);
+
+ printk(
+" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%lxn\n",
+ (unsigned) h->max_host_qng, (unsigned) h->max_dvc_qng,
+ (ulong) h->carr_freelist);
+
+ printk(
+" icq_sp 0x%lx, irq_sp 0x%lx\n",
+ (ulong) h->icq_sp, (ulong) h->irq_sp);
+
+ printk(
+" no_scam 0x%x, tagqng_able 0x%x\n",
+ (unsigned) h->no_scam, (unsigned) h->tagqng_able);
+
+ printk(
+" chip_scsi_id 0x%x, cfg 0x%lx\n",
+ (unsigned) h->chip_scsi_id, (ulong) h->cfg);
+}
+
+/*
+ * asc_prt_adv_dvc_cfg()
+ *
+ * Display an ADV_DVC_CFG structure.
+ */
+STATIC void
+asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h)
+{
+ printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong) h);
+
+ printk(
+" disc_enable 0x%x, termination 0x%x\n",
+ h->disc_enable, h->termination);
+
+ printk(
+" chip_version 0x%x, mcode_date 0x%x\n",
+ h->chip_version, h->mcode_date);
+
+ printk(
+" mcode_version 0x%x, pci_device_id 0x%x, lib_version %u\n",
+ h->mcode_version, to_pci_dev(h->dev)->device, h->lib_version);
+
+ printk(
+" control_flag 0x%x, pci_slot_info 0x%x\n",
+ h->control_flag, h->pci_slot_info);
+}
+
+/*
+ * asc_prt_adv_scsi_req_q()
+ *
+ * Display an ADV_SCSI_REQ_Q structure.
+ */
+STATIC void
+asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
+{
+ int sg_blk_cnt;
+ struct asc_sg_block *sg_ptr;
+
+ printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong) q);
+
+ printk(
+" target_id %u, target_lun %u, srb_ptr 0x%lx, a_flag 0x%x\n",
+ q->target_id, q->target_lun, (ulong) q->srb_ptr, q->a_flag);
+
+ printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n",
+ q->cntl, (ulong) le32_to_cpu(q->data_addr), (ulong) q->vdata_addr);
+
+ printk(
+" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
+ (ulong) le32_to_cpu(q->data_cnt),
+ (ulong) le32_to_cpu(q->sense_addr), q->sense_len);
+
+ printk(
+" cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n",
+ q->cdb_len, q->done_status, q->host_status, q->scsi_status);
+
+ printk(
+" sg_working_ix 0x%x, target_cmd %u\n",
+ q->sg_working_ix, q->target_cmd);
+
+ printk(
+" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n",
+ (ulong) le32_to_cpu(q->scsiq_rptr),
+ (ulong) le32_to_cpu(q->sg_real_addr), (ulong) q->sg_list_ptr);
+
+ /* Display the request's ADV_SG_BLOCK structures. */
+ if (q->sg_list_ptr != NULL)
+ {
+ sg_blk_cnt = 0;
+ while (1) {
+ /*
+ * 'sg_ptr' is a physical address. Convert it to a virtual
+ * address by indexing 'sg_blk_cnt' into the virtual address
+ * array 'sg_list_ptr'.
+ *
+ * XXX - Assumes all SG physical blocks are virtually contiguous.
+ */
+ sg_ptr = &(((ADV_SG_BLOCK *) (q->sg_list_ptr))[sg_blk_cnt]);
+ asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr);
+ if (sg_ptr->sg_ptr == 0)
+ {
+ break;
+ }
+ sg_blk_cnt++;
+ }
+ }
+}
+
+/*
+ * asc_prt_adv_sgblock()
+ *
+ * Display an ADV_SG_BLOCK structure.
+ */
+STATIC void
+asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b)
+{
+ int i;
+
+ printk(" ASC_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
+ (ulong) b, sgblockno);
+ printk(" sg_cnt %u, sg_ptr 0x%lx\n",
+ b->sg_cnt, (ulong) le32_to_cpu(b->sg_ptr));
+ ASC_ASSERT(b->sg_cnt <= NO_OF_SG_PER_BLOCK);
+ if (b->sg_ptr != 0)
+ {
+ ASC_ASSERT(b->sg_cnt == NO_OF_SG_PER_BLOCK);
+ }
+ for (i = 0; i < b->sg_cnt; i++) {
+ printk(" [%u]: sg_addr 0x%lx, sg_count 0x%lx\n",
+ i, (ulong) b->sg_list[i].sg_addr, (ulong) b->sg_list[i].sg_count);
+ }
+}
+
+/*
+ * asc_prt_hex()
+ *
+ * Print hexadecimal output in 4 byte groupings 32 bytes
+ * or 8 double-words per line.
+ */
+STATIC void
+asc_prt_hex(char *f, uchar *s, int l)
+{
+ int i;
+ int j;
+ int k;
+ int m;
+
+ printk("%s: (%d bytes)\n", f, l);
+
+ for (i = 0; i < l; i += 32) {
+
+ /* Display a maximum of 8 double-words per line. */
+ if ((k = (l - i) / 4) >= 8) {
+ k = 8;
+ m = 0;
+ } else {
+ m = (l - i) % 4;
+ }
+
+ for (j = 0; j < k; j++) {
+ printk(" %2.2X%2.2X%2.2X%2.2X",
+ (unsigned) s[i+(j*4)], (unsigned) s[i+(j*4)+1],
+ (unsigned) s[i+(j*4)+2], (unsigned) s[i+(j*4)+3]);
+ }
+
+ switch (m) {
+ case 0:
+ default:
+ break;
+ case 1:
+ printk(" %2.2X",
+ (unsigned) s[i+(j*4)]);
+ break;
+ case 2:
+ printk(" %2.2X%2.2X",
+ (unsigned) s[i+(j*4)],
+ (unsigned) s[i+(j*4)+1]);
+ break;
+ case 3:
+ printk(" %2.2X%2.2X%2.2X",
+ (unsigned) s[i+(j*4)+1],
+ (unsigned) s[i+(j*4)+2],
+ (unsigned) s[i+(j*4)+3]);
+ break;
+ }
+
+ printk("\n");
+ }
+}
+#endif /* ADVANSYS_DEBUG */
+
+/*
+ * --- Asc Library Functions
+ */
+
+STATIC ushort __init
+AscGetEisaChipCfg(
+ PortAddr iop_base)
+{
+ PortAddr eisa_cfg_iop;
+
+ eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
+ (PortAddr) (ASC_EISA_CFG_IOP_MASK);
+ return (inpw(eisa_cfg_iop));
+}
+
+STATIC uchar __init
+AscSetChipScsiID(
+ PortAddr iop_base,
+ uchar new_host_id
+)
+{
+ ushort cfg_lsw;
+
+ if (AscGetChipScsiID(iop_base) == new_host_id) {
+ return (new_host_id);
+ }
+ cfg_lsw = AscGetChipCfgLsw(iop_base);
+ cfg_lsw &= 0xF8FF;
+ cfg_lsw |= (ushort) ((new_host_id & ASC_MAX_TID) << 8);
+ AscSetChipCfgLsw(iop_base, cfg_lsw);
+ return (AscGetChipScsiID(iop_base));
+}
+
+STATIC uchar __init
+AscGetChipScsiCtrl(
+ PortAddr iop_base)
+{
+ uchar sc;
+
+ AscSetBank(iop_base, 1);
+ sc = inp(iop_base + IOP_REG_SC);
+ AscSetBank(iop_base, 0);
+ return (sc);
+}
+
+STATIC uchar __init
+AscGetChipVersion(
+ PortAddr iop_base,
+ ushort bus_type
+)
+{
+ if ((bus_type & ASC_IS_EISA) != 0) {
+ PortAddr eisa_iop;
+ uchar revision;
+ eisa_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
+ (PortAddr) ASC_EISA_REV_IOP_MASK;
+ revision = inp(eisa_iop);
+ return ((uchar) ((ASC_CHIP_MIN_VER_EISA - 1) + revision));
+ }
+ return (AscGetChipVerNo(iop_base));
+}
+
+STATIC ushort __init
+AscGetChipBusType(
+ PortAddr iop_base)
+{
+ ushort chip_ver;
+
+ chip_ver = AscGetChipVerNo(iop_base);
+ if (
+ (chip_ver >= ASC_CHIP_MIN_VER_VL)
+ && (chip_ver <= ASC_CHIP_MAX_VER_VL)
+) {
+ if (
+ ((iop_base & 0x0C30) == 0x0C30)
+ || ((iop_base & 0x0C50) == 0x0C50)
+) {
+ return (ASC_IS_EISA);
+ }
+ return (ASC_IS_VL);
+ }
+ if ((chip_ver >= ASC_CHIP_MIN_VER_ISA) &&
+ (chip_ver <= ASC_CHIP_MAX_VER_ISA)) {
+ if (chip_ver >= ASC_CHIP_MIN_VER_ISA_PNP) {
+ return (ASC_IS_ISAPNP);
+ }
+ return (ASC_IS_ISA);
+ } else if ((chip_ver >= ASC_CHIP_MIN_VER_PCI) &&
+ (chip_ver <= ASC_CHIP_MAX_VER_PCI)) {
+ return (ASC_IS_PCI);
+ }
+ return (0);
+}
+
+STATIC ASC_DCNT
+AscLoadMicroCode(
+ PortAddr iop_base,
+ ushort s_addr,
+ uchar *mcode_buf,
+ ushort mcode_size
+)
+{
+ ASC_DCNT chksum;
+ ushort mcode_word_size;
+ ushort mcode_chksum;
+
+ /* Write the microcode buffer starting at LRAM address 0. */
+ mcode_word_size = (ushort) (mcode_size >> 1);
+ AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size);
+ AscMemWordCopyPtrToLram(iop_base, s_addr, mcode_buf, mcode_word_size);
+
+ chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size);
+ ASC_DBG1(1, "AscLoadMicroCode: chksum 0x%lx\n", (ulong) chksum);
+ mcode_chksum = (ushort) AscMemSumLramWord(iop_base,
+ (ushort) ASC_CODE_SEC_BEG,
+ (ushort) ((mcode_size - s_addr - (ushort) ASC_CODE_SEC_BEG) / 2));
+ ASC_DBG1(1, "AscLoadMicroCode: mcode_chksum 0x%lx\n",
+ (ulong) mcode_chksum);
+ AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W, mcode_chksum);
+ AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W, mcode_size);
+ return (chksum);
+}
+
+STATIC int
+AscFindSignature(
+ PortAddr iop_base
+)
+{
+ ushort sig_word;
+
+ ASC_DBG2(1, "AscFindSignature: AscGetChipSignatureByte(0x%x) 0x%x\n",
+ iop_base, AscGetChipSignatureByte(iop_base));
+ if (AscGetChipSignatureByte(iop_base) == (uchar) ASC_1000_ID1B) {
+ ASC_DBG2(1, "AscFindSignature: AscGetChipSignatureWord(0x%x) 0x%x\n",
+ iop_base, AscGetChipSignatureWord(iop_base));
+ sig_word = AscGetChipSignatureWord(iop_base);
+ if ((sig_word == (ushort) ASC_1000_ID0W) ||
+ (sig_word == (ushort) ASC_1000_ID0W_FIX)) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+STATIC PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __initdata =
+{
+ 0x100, ASC_IOADR_1, 0x120, ASC_IOADR_2, 0x140, ASC_IOADR_3, ASC_IOADR_4,
+ ASC_IOADR_5, ASC_IOADR_6, ASC_IOADR_7, ASC_IOADR_8
+};
+
+#ifdef CONFIG_ISA
+STATIC uchar _isa_pnp_inited __initdata = 0;
+
+STATIC PortAddr __init
+AscSearchIOPortAddr(
+ PortAddr iop_beg,
+ ushort bus_type)
+{
+ if (bus_type & ASC_IS_VL) {
+ while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) {
+ if (AscGetChipVersion(iop_beg, bus_type) <= ASC_CHIP_MAX_VER_VL) {
+ return (iop_beg);
+ }
+ }
+ return (0);
+ }
+ if (bus_type & ASC_IS_ISA) {
+ if (_isa_pnp_inited == 0) {
+ AscSetISAPNPWaitForKey();
+ _isa_pnp_inited++;
+ }
+ while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) {
+ if ((AscGetChipVersion(iop_beg, bus_type) & ASC_CHIP_VER_ISA_BIT) != 0) {
+ return (iop_beg);
+ }
+ }
+ return (0);
+ }
+ if (bus_type & ASC_IS_EISA) {
+ if ((iop_beg = AscSearchIOPortAddrEISA(iop_beg)) != 0) {
+ return (iop_beg);
+ }
+ return (0);
+ }
+ return (0);
+}
+
+STATIC PortAddr __init
+AscSearchIOPortAddr11(
+ PortAddr s_addr
+)
+{
+ int i;
+ PortAddr iop_base;
+
+ for (i = 0; i < ASC_IOADR_TABLE_MAX_IX; i++) {
+ if (_asc_def_iop_base[i] > s_addr) {
+ break;
+ }
+ }
+ for (; i < ASC_IOADR_TABLE_MAX_IX; i++) {
+ iop_base = _asc_def_iop_base[i];
+ if (check_region(iop_base, ASC_IOADR_GAP) != 0) {
+ ASC_DBG1(1,
+ "AscSearchIOPortAddr11: check_region() failed I/O port 0x%x\n",
+ iop_base);
+ continue;
+ }
+ ASC_DBG1(1, "AscSearchIOPortAddr11: probing I/O port 0x%x\n", iop_base);
+ if (AscFindSignature(iop_base)) {
+ return (iop_base);
+ }
+ }
+ return (0);
+}
+
+STATIC void __init
+AscSetISAPNPWaitForKey(void)
+{
+ outp(ASC_ISA_PNP_PORT_ADDR, 0x02);
+ outp(ASC_ISA_PNP_PORT_WRITE, 0x02);
+ return;
+}
+#endif /* CONFIG_ISA */
+
+STATIC void __init
+AscToggleIRQAct(
+ PortAddr iop_base
+)
+{
+ AscSetChipStatus(iop_base, CIW_IRQ_ACT);
+ AscSetChipStatus(iop_base, 0);
+ return;
+}
+
+STATIC uchar __init
+AscGetChipIRQ(
+ PortAddr iop_base,
+ ushort bus_type)
+{
+ ushort cfg_lsw;
+ uchar chip_irq;
+
+ if ((bus_type & ASC_IS_EISA) != 0) {
+ cfg_lsw = AscGetEisaChipCfg(iop_base);
+ chip_irq = (uchar) (((cfg_lsw >> 8) & 0x07) + 10);
+ if ((chip_irq == 13) || (chip_irq > 15)) {
+ return (0);
+ }
+ return (chip_irq);
+ }
+ if ((bus_type & ASC_IS_VL) != 0) {
+ cfg_lsw = AscGetChipCfgLsw(iop_base);
+ chip_irq = (uchar) (((cfg_lsw >> 2) & 0x07));
+ if ((chip_irq == 0) ||
+ (chip_irq == 4) ||
+ (chip_irq == 7)) {
+ return (0);
+ }
+ return ((uchar) (chip_irq + (ASC_MIN_IRQ_NO - 1)));
+ }
+ cfg_lsw = AscGetChipCfgLsw(iop_base);
+ chip_irq = (uchar) (((cfg_lsw >> 2) & 0x03));
+ if (chip_irq == 3)
+ chip_irq += (uchar) 2;
+ return ((uchar) (chip_irq + ASC_MIN_IRQ_NO));
+}
+
+STATIC uchar __init
+AscSetChipIRQ(
+ PortAddr iop_base,
+ uchar irq_no,
+ ushort bus_type)
+{
+ ushort cfg_lsw;
+
+ if ((bus_type & ASC_IS_VL) != 0) {
+ if (irq_no != 0) {
+ if ((irq_no < ASC_MIN_IRQ_NO) || (irq_no > ASC_MAX_IRQ_NO)) {
+ irq_no = 0;
+ } else {
+ irq_no -= (uchar) ((ASC_MIN_IRQ_NO - 1));
+ }
+ }
+ cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base) & 0xFFE3);
+ cfg_lsw |= (ushort) 0x0010;
+ AscSetChipCfgLsw(iop_base, cfg_lsw);
+ AscToggleIRQAct(iop_base);
+ cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base) & 0xFFE0);
+ cfg_lsw |= (ushort) ((irq_no & 0x07) << 2);
+ AscSetChipCfgLsw(iop_base, cfg_lsw);
+ AscToggleIRQAct(iop_base);
+ return (AscGetChipIRQ(iop_base, bus_type));
+ }
+ if ((bus_type & (ASC_IS_ISA)) != 0) {
+ if (irq_no == 15)
+ irq_no -= (uchar) 2;
+ irq_no -= (uchar) ASC_MIN_IRQ_NO;
+ cfg_lsw = (ushort) (AscGetChipCfgLsw(iop_base) & 0xFFF3);
+ cfg_lsw |= (ushort) ((irq_no & 0x03) << 2);
+ AscSetChipCfgLsw(iop_base, cfg_lsw);
+ return (AscGetChipIRQ(iop_base, bus_type));
+ }
+ return (0);
+}
+
+#ifdef CONFIG_ISA
+STATIC void __init
+AscEnableIsaDma(
+ uchar dma_channel)
+{
+ if (dma_channel < 4) {
+ outp(0x000B, (ushort) (0xC0 | dma_channel));
+ outp(0x000A, dma_channel);
+ } else if (dma_channel < 8) {
+ outp(0x00D6, (ushort) (0xC0 | (dma_channel - 4)));
+ outp(0x00D4, (ushort) (dma_channel - 4));
+ }
+ return;
+}
+#endif /* CONFIG_ISA */
+
+STATIC int
+AscIsrChipHalted(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ EXT_MSG ext_msg;
+ EXT_MSG out_msg;
+ ushort halt_q_addr;
+ int sdtr_accept;
+ ushort int_halt_code;
+ ASC_SCSI_BIT_ID_TYPE scsi_busy;
+ ASC_SCSI_BIT_ID_TYPE target_id;
+ PortAddr iop_base;
+ uchar tag_code;
+ uchar q_status;
+ uchar halt_qp;
+ uchar sdtr_data;
+ uchar target_ix;
+ uchar q_cntl, tid_no;
+ uchar cur_dvc_qng;
+ uchar asyn_sdtr;
+ uchar scsi_status;
+ asc_board_t *boardp;
+
+ ASC_ASSERT(asc_dvc->drv_ptr != NULL);
+ boardp = asc_dvc->drv_ptr;
+
+ iop_base = asc_dvc->iop_base;
+ int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W);
+
+ halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B);
+ halt_q_addr = ASC_QNO_TO_QADDR(halt_qp);
+ target_ix = AscReadLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TARGET_IX));
+ q_cntl = AscReadLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL));
+ tid_no = ASC_TIX_TO_TID(target_ix);
+ target_id = (uchar) ASC_TID_TO_TARGET_ID(tid_no);
+ if (asc_dvc->pci_fix_asyn_xfer & target_id) {
+ asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB;
+ } else {
+ asyn_sdtr = 0;
+ }
+ if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX) {
+ if (asc_dvc->pci_fix_asyn_xfer & target_id) {
+ AscSetChipSDTR(iop_base, 0, tid_no);
+ boardp->sdtr_data[tid_no] = 0;
+ }
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) {
+ if (asc_dvc->pci_fix_asyn_xfer & target_id) {
+ AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
+ boardp->sdtr_data[tid_no] = asyn_sdtr;
+ }
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else if (int_halt_code == ASC_HALT_EXTMSG_IN) {
+
+ AscMemWordCopyPtrFromLram(iop_base,
+ ASCV_MSGIN_BEG,
+ (uchar *) &ext_msg,
+ sizeof(EXT_MSG) >> 1);
+
+ if (ext_msg.msg_type == MS_EXTEND &&
+ ext_msg.msg_req == MS_SDTR_CODE &&
+ ext_msg.msg_len == MS_SDTR_LEN) {
+ sdtr_accept = TRUE;
+ if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) {
+
+ sdtr_accept = FALSE;
+ ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET;
+ }
+ if ((ext_msg.xfer_period <
+ asc_dvc->sdtr_period_tbl[asc_dvc->host_init_sdtr_index]) ||
+ (ext_msg.xfer_period >
+ asc_dvc->sdtr_period_tbl[asc_dvc->max_sdtr_index])) {
+ sdtr_accept = FALSE;
+ ext_msg.xfer_period =
+ asc_dvc->sdtr_period_tbl[asc_dvc->host_init_sdtr_index];
+ }
+ if (sdtr_accept) {
+ sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_period,
+ ext_msg.req_ack_offset);
+ if ((sdtr_data == 0xFF)) {
+
+ q_cntl |= QC_MSG_OUT;
+ asc_dvc->init_sdtr &= ~target_id;
+ asc_dvc->sdtr_done &= ~target_id;
+ AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
+ boardp->sdtr_data[tid_no] = asyn_sdtr;
+ }
+ }
+ if (ext_msg.req_ack_offset == 0) {
+
+ q_cntl &= ~QC_MSG_OUT;
+ asc_dvc->init_sdtr &= ~target_id;
+ asc_dvc->sdtr_done &= ~target_id;
+ AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
+ } else {
+ if (sdtr_accept && (q_cntl & QC_MSG_OUT)) {
+
+ q_cntl &= ~QC_MSG_OUT;
+ asc_dvc->sdtr_done |= target_id;
+ asc_dvc->init_sdtr |= target_id;
+ asc_dvc->pci_fix_asyn_xfer &= ~target_id;
+ sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_period,
+ ext_msg.req_ack_offset);
+ AscSetChipSDTR(iop_base, sdtr_data, tid_no);
+ boardp->sdtr_data[tid_no] = sdtr_data;
+ } else {
+
+ q_cntl |= QC_MSG_OUT;
+ AscMsgOutSDTR(asc_dvc,
+ ext_msg.xfer_period,
+ ext_msg.req_ack_offset);
+ asc_dvc->pci_fix_asyn_xfer &= ~target_id;
+ sdtr_data = AscCalSDTRData(asc_dvc, ext_msg.xfer_period,
+ ext_msg.req_ack_offset);
+ AscSetChipSDTR(iop_base, sdtr_data, tid_no);
+ boardp->sdtr_data[tid_no] = sdtr_data;
+ asc_dvc->sdtr_done |= target_id;
+ asc_dvc->init_sdtr |= target_id;
+ }
+ }
+
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL),
+ q_cntl);
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else if (ext_msg.msg_type == MS_EXTEND &&
+ ext_msg.msg_req == MS_WDTR_CODE &&
+ ext_msg.msg_len == MS_WDTR_LEN) {
+
+ ext_msg.wdtr_width = 0;
+ AscMemWordCopyPtrToLram(iop_base,
+ ASCV_MSGOUT_BEG,
+ (uchar *) &ext_msg,
+ sizeof(EXT_MSG) >> 1);
+ q_cntl |= QC_MSG_OUT;
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL),
+ q_cntl);
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else {
+
+ ext_msg.msg_type = MESSAGE_REJECT;
+ AscMemWordCopyPtrToLram(iop_base,
+ ASCV_MSGOUT_BEG,
+ (uchar *) &ext_msg,
+ sizeof(EXT_MSG) >> 1);
+ q_cntl |= QC_MSG_OUT;
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL),
+ q_cntl);
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ }
+ } else if (int_halt_code == ASC_HALT_CHK_CONDITION) {
+
+ q_cntl |= QC_REQ_SENSE;
+
+ if ((asc_dvc->init_sdtr & target_id) != 0) {
+
+ asc_dvc->sdtr_done &= ~target_id;
+
+ sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
+ q_cntl |= QC_MSG_OUT;
+ AscMsgOutSDTR(asc_dvc,
+ asc_dvc->sdtr_period_tbl[(sdtr_data >> 4) &
+ (uchar) (asc_dvc->max_sdtr_index - 1)],
+ (uchar) (sdtr_data & (uchar) ASC_SYN_MAX_OFFSET));
+ }
+
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL),
+ q_cntl);
+
+ tag_code = AscReadLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TAG_CODE));
+ tag_code &= 0xDC;
+ if (
+ (asc_dvc->pci_fix_asyn_xfer & target_id)
+ && !(asc_dvc->pci_fix_asyn_xfer_always & target_id)
+) {
+
+ tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT
+ | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX);
+
+ }
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_TAG_CODE),
+ tag_code);
+
+ q_status = AscReadLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_STATUS));
+ q_status |= (QS_READY | QS_BUSY);
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_STATUS),
+ q_status);
+
+ scsi_busy = AscReadLramByte(iop_base,
+ (ushort) ASCV_SCSIBUSY_B);
+ scsi_busy &= ~target_id;
+ AscWriteLramByte(iop_base, (ushort) ASCV_SCSIBUSY_B, scsi_busy);
+
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else if (int_halt_code == ASC_HALT_SDTR_REJECTED) {
+
+ AscMemWordCopyPtrFromLram(iop_base,
+ ASCV_MSGOUT_BEG,
+ (uchar *) &out_msg,
+ sizeof(EXT_MSG) >> 1);
+
+ if ((out_msg.msg_type == MS_EXTEND) &&
+ (out_msg.msg_len == MS_SDTR_LEN) &&
+ (out_msg.msg_req == MS_SDTR_CODE)) {
+
+ asc_dvc->init_sdtr &= ~target_id;
+ asc_dvc->sdtr_done &= ~target_id;
+ AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
+ boardp->sdtr_data[tid_no] = asyn_sdtr;
+ }
+ q_cntl &= ~QC_MSG_OUT;
+ AscWriteLramByte(iop_base,
+ (ushort) (halt_q_addr + (ushort) ASC_SCSIQ_B_CNTL),
+ q_cntl);
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) {
+
+ scsi_status = AscReadLramByte(iop_base,
+ (ushort) ((ushort) halt_q_addr + (ushort) ASC_SCSIQ_SCSI_STATUS));
+ cur_dvc_qng = AscReadLramByte(iop_base,
+ (ushort) ((ushort) ASC_QADR_BEG + (ushort) target_ix));
+ if ((cur_dvc_qng > 0) &&
+ (asc_dvc->cur_dvc_qng[tid_no] > 0)) {
+
+ scsi_busy = AscReadLramByte(iop_base,
+ (ushort) ASCV_SCSIBUSY_B);
+ scsi_busy |= target_id;
+ AscWriteLramByte(iop_base,
+ (ushort) ASCV_SCSIBUSY_B, scsi_busy);
+ asc_dvc->queue_full_or_busy |= target_id;
+
+ if (scsi_status == SAM_STAT_TASK_SET_FULL) {
+ if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) {
+ cur_dvc_qng -= 1;
+ asc_dvc->max_dvc_qng[tid_no] = cur_dvc_qng;
+
+ AscWriteLramByte(iop_base,
+ (ushort) ((ushort) ASCV_MAX_DVC_QNG_BEG +
+ (ushort) tid_no),
+ cur_dvc_qng);
+
+ /*
+ * Set the device queue depth to the number of
+ * active requests when the QUEUE FULL condition
+ * was encountered.
+ */
+ boardp->queue_full |= target_id;
+ boardp->queue_full_cnt[tid_no] = cur_dvc_qng;
+ }
+ }
+ }
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return (0);
+ }
+#if CC_VERY_LONG_SG_LIST
+ else if (int_halt_code == ASC_HALT_HOST_COPY_SG_LIST_TO_RISC)
+ {
+ uchar q_no;
+ ushort q_addr;
+ uchar sg_wk_q_no;
+ uchar first_sg_wk_q_no;
+ ASC_SCSI_Q *scsiq; /* Ptr to driver request. */
+ ASC_SG_HEAD *sg_head; /* Ptr to driver SG request. */
+ ASC_SG_LIST_Q scsi_sg_q; /* Structure written to queue. */
+ ushort sg_list_dwords;
+ ushort sg_entry_cnt;
+ uchar next_qp;
+ int i;
+
+ q_no = AscReadLramByte(iop_base, (ushort) ASCV_REQ_SG_LIST_QP);
+ if (q_no == ASC_QLINK_END)
+ {
+ return(0);
+ }
+
+ q_addr = ASC_QNO_TO_QADDR(q_no);
+
+ /*
+ * Convert the request's SRB pointer to a host ASC_SCSI_REQ
+ * structure pointer using a macro provided by the driver.
+ * The ASC_SCSI_REQ pointer provides a pointer to the
+ * host ASC_SG_HEAD structure.
+ */
+ /* Read request's SRB pointer. */
+ scsiq = (ASC_SCSI_Q *)
+ ASC_SRB2SCSIQ(
+ ASC_U32_TO_VADDR(AscReadLramDWord(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_D_SRBPTR))));
+
+ /*
+ * Get request's first and working SG queue.
+ */
+ sg_wk_q_no = AscReadLramByte(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_B_SG_WK_QP));
+
+ first_sg_wk_q_no = AscReadLramByte(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_B_FIRST_SG_WK_QP));
+
+ /*
+ * Reset request's working SG queue back to the
+ * first SG queue.
+ */
+ AscWriteLramByte(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_SG_WK_QP),
+ first_sg_wk_q_no);
+
+ sg_head = scsiq->sg_head;
+
+ /*
+ * Set sg_entry_cnt to the number of SG elements
+ * that will be completed on this interrupt.
+ *
+ * Note: The allocated SG queues contain ASC_MAX_SG_LIST - 1
+ * SG elements. The data_cnt and data_addr fields which
+ * add 1 to the SG element capacity are not used when
+ * restarting SG handling after a halt.
+ */
+ if (scsiq->remain_sg_entry_cnt > (ASC_MAX_SG_LIST - 1))
+ {
+ sg_entry_cnt = ASC_MAX_SG_LIST - 1;
+
+ /*
+ * Keep track of remaining number of SG elements that will
+ * need to be handled on the next interrupt.
+ */
+ scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1);
+ } else
+ {
+ sg_entry_cnt = scsiq->remain_sg_entry_cnt;
+ scsiq->remain_sg_entry_cnt = 0;
+ }
+
+ /*
+ * Copy SG elements into the list of allocated SG queues.
+ *
+ * Last index completed is saved in scsiq->next_sg_index.
+ */
+ next_qp = first_sg_wk_q_no;
+ q_addr = ASC_QNO_TO_QADDR(next_qp);
+ scsi_sg_q.sg_head_qp = q_no;
+ scsi_sg_q.cntl = QCSG_SG_XFER_LIST;
+ for( i = 0; i < sg_head->queue_cnt; i++)
+ {
+ scsi_sg_q.seq_no = i + 1;
+ if (sg_entry_cnt > ASC_SG_LIST_PER_Q)
+ {
+ sg_list_dwords = (uchar) (ASC_SG_LIST_PER_Q * 2);
+ sg_entry_cnt -= ASC_SG_LIST_PER_Q;
+ /*
+ * After very first SG queue RISC FW uses next
+ * SG queue first element then checks sg_list_cnt
+ * against zero and then decrements, so set
+ * sg_list_cnt 1 less than number of SG elements
+ * in each SG queue.
+ */
+ scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q - 1;
+ scsi_sg_q.sg_cur_list_cnt = ASC_SG_LIST_PER_Q - 1;
+ } else {
+ /*
+ * This is the last SG queue in the list of
+ * allocated SG queues. If there are more
+ * SG elements than will fit in the allocated
+ * queues, then set the QCSG_SG_XFER_MORE flag.
+ */
+ if (scsiq->remain_sg_entry_cnt != 0)
+ {
+ scsi_sg_q.cntl |= QCSG_SG_XFER_MORE;
+ } else
+ {
+ scsi_sg_q.cntl |= QCSG_SG_XFER_END;
+ }
+ /* equals sg_entry_cnt * 2 */
+ sg_list_dwords = sg_entry_cnt << 1;
+ scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1;
+ scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1;
+ sg_entry_cnt = 0;
+ }
+
+ scsi_sg_q.q_no = next_qp;
+ AscMemWordCopyPtrToLram(iop_base,
+ q_addr + ASC_SCSIQ_SGHD_CPY_BEG,
+ (uchar *) &scsi_sg_q,
+ sizeof(ASC_SG_LIST_Q) >> 1);
+
+ AscMemDWordCopyPtrToLram(iop_base,
+ q_addr + ASC_SGQ_LIST_BEG,
+ (uchar *) &sg_head->sg_list[scsiq->next_sg_index],
+ sg_list_dwords);
+
+ scsiq->next_sg_index += ASC_SG_LIST_PER_Q;
+
+ /*
+ * If the just completed SG queue contained the
+ * last SG element, then no more SG queues need
+ * to be written.
+ */
+ if (scsi_sg_q.cntl & QCSG_SG_XFER_END)
+ {
+ break;
+ }
+
+ next_qp = AscReadLramByte( iop_base,
+ ( ushort )( q_addr+ASC_SCSIQ_B_FWD ) );
+ q_addr = ASC_QNO_TO_QADDR( next_qp );
+ }
+
+ /*
+ * Clear the halt condition so the RISC will be restarted
+ * after the return.
+ */
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ return(0);
+ }
+#endif /* CC_VERY_LONG_SG_LIST */
+ return (0);
+}
+
+STATIC uchar
+_AscCopyLramScsiDoneQ(
+ PortAddr iop_base,
+ ushort q_addr,
+ ASC_QDONE_INFO * scsiq,
+ ASC_DCNT max_dma_count
+)
+{
+ ushort _val;
+ uchar sg_queue_cnt;
+
+ DvcGetQinfo(iop_base,
+ q_addr + ASC_SCSIQ_DONE_INFO_BEG,
+ (uchar *) scsiq,
+ (sizeof (ASC_SCSIQ_2) + sizeof (ASC_SCSIQ_3)) / 2);
+
+ _val = AscReadLramWord(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS));
+ scsiq->q_status = (uchar) _val;
+ scsiq->q_no = (uchar) (_val >> 8);
+ _val = AscReadLramWord(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_CNTL));
+ scsiq->cntl = (uchar) _val;
+ sg_queue_cnt = (uchar) (_val >> 8);
+ _val = AscReadLramWord(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_SENSE_LEN));
+ scsiq->sense_len = (uchar) _val;
+ scsiq->extra_bytes = (uchar) (_val >> 8);
+
+ /*
+ * Read high word of remain bytes from alternate location.
+ */
+ scsiq->remain_bytes = (((ADV_DCNT) AscReadLramWord( iop_base,
+ (ushort) (q_addr+ (ushort) ASC_SCSIQ_W_ALT_DC1))) << 16);
+ /*
+ * Read low word of remain bytes from original location.
+ */
+ scsiq->remain_bytes += AscReadLramWord(iop_base,
+ (ushort) (q_addr+ (ushort) ASC_SCSIQ_DW_REMAIN_XFER_CNT));
+
+ scsiq->remain_bytes &= max_dma_count;
+ return (sg_queue_cnt);
+}
+
+STATIC int
+AscIsrQDone(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ uchar next_qp;
+ uchar n_q_used;
+ uchar sg_list_qp;
+ uchar sg_queue_cnt;
+ uchar q_cnt;
+ uchar done_q_tail;
+ uchar tid_no;
+ ASC_SCSI_BIT_ID_TYPE scsi_busy;
+ ASC_SCSI_BIT_ID_TYPE target_id;
+ PortAddr iop_base;
+ ushort q_addr;
+ ushort sg_q_addr;
+ uchar cur_target_qng;
+ ASC_QDONE_INFO scsiq_buf;
+ ASC_QDONE_INFO *scsiq;
+ int false_overrun;
+ ASC_ISR_CALLBACK asc_isr_callback;
+
+ iop_base = asc_dvc->iop_base;
+ asc_isr_callback = asc_dvc->isr_callback;
+ n_q_used = 1;
+ scsiq = (ASC_QDONE_INFO *) & scsiq_buf;
+ done_q_tail = (uchar) AscGetVarDoneQTail(iop_base);
+ q_addr = ASC_QNO_TO_QADDR(done_q_tail);
+ next_qp = AscReadLramByte(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_FWD));
+ if (next_qp != ASC_QLINK_END) {
+ AscPutVarDoneQTail(iop_base, next_qp);
+ q_addr = ASC_QNO_TO_QADDR(next_qp);
+ sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq,
+ asc_dvc->max_dma_count);
+ AscWriteLramByte(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS),
+ (uchar) (scsiq->q_status & (uchar) ~ (QS_READY | QS_ABORTED)));
+ tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix);
+ target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix);
+ if ((scsiq->cntl & QC_SG_HEAD) != 0) {
+ sg_q_addr = q_addr;
+ sg_list_qp = next_qp;
+ for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) {
+ sg_list_qp = AscReadLramByte(iop_base,
+ (ushort) (sg_q_addr + (ushort) ASC_SCSIQ_B_FWD));
+ sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp);
+ if (sg_list_qp == ASC_QLINK_END) {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_SG_Q_LINKS);
+ scsiq->d3.done_stat = QD_WITH_ERROR;
+ scsiq->d3.host_stat = QHSTA_D_QDONE_SG_LIST_CORRUPTED;
+ goto FATAL_ERR_QDONE;
+ }
+ AscWriteLramByte(iop_base,
+ (ushort) (sg_q_addr + (ushort) ASC_SCSIQ_B_STATUS),
+ QS_FREE);
+ }
+ n_q_used = sg_queue_cnt + 1;
+ AscPutVarDoneQTail(iop_base, sg_list_qp);
+ }
+ if (asc_dvc->queue_full_or_busy & target_id) {
+ cur_target_qng = AscReadLramByte(iop_base,
+ (ushort) ((ushort) ASC_QADR_BEG + (ushort) scsiq->d2.target_ix));
+ if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) {
+ scsi_busy = AscReadLramByte(iop_base,
+ (ushort) ASCV_SCSIBUSY_B);
+ scsi_busy &= ~target_id;
+ AscWriteLramByte(iop_base,
+ (ushort) ASCV_SCSIBUSY_B, scsi_busy);
+ asc_dvc->queue_full_or_busy &= ~target_id;
+ }
+ }
+ if (asc_dvc->cur_total_qng >= n_q_used) {
+ asc_dvc->cur_total_qng -= n_q_used;
+ if (asc_dvc->cur_dvc_qng[tid_no] != 0) {
+ asc_dvc->cur_dvc_qng[tid_no]--;
+ }
+ } else {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG);
+ scsiq->d3.done_stat = QD_WITH_ERROR;
+ goto FATAL_ERR_QDONE;
+ }
+ if ((scsiq->d2.srb_ptr == 0UL) ||
+ ((scsiq->q_status & QS_ABORTED) != 0)) {
+ return (0x11);
+ } else if (scsiq->q_status == QS_DONE) {
+ false_overrun = FALSE;
+ if (scsiq->extra_bytes != 0) {
+ scsiq->remain_bytes += (ADV_DCNT) scsiq->extra_bytes;
+ }
+ if (scsiq->d3.done_stat == QD_WITH_ERROR) {
+ if (scsiq->d3.host_stat == QHSTA_M_DATA_OVER_RUN) {
+ if ((scsiq->cntl & (QC_DATA_IN | QC_DATA_OUT)) == 0) {
+ scsiq->d3.done_stat = QD_NO_ERROR;
+ scsiq->d3.host_stat = QHSTA_NO_ERROR;
+ } else if (false_overrun) {
+ scsiq->d3.done_stat = QD_NO_ERROR;
+ scsiq->d3.host_stat = QHSTA_NO_ERROR;
+ }
+ } else if (scsiq->d3.host_stat ==
+ QHSTA_M_HUNG_REQ_SCSI_BUS_RESET) {
+ AscStopChip(iop_base);
+ AscSetChipControl(iop_base,
+ (uchar) (CC_SCSI_RESET | CC_HALT));
+ DvcDelayNanoSecond(asc_dvc, 60000);
+ AscSetChipControl(iop_base, CC_HALT);
+ AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT);
+ AscSetChipStatus(iop_base, 0);
+ AscSetChipControl(iop_base, 0);
+ }
+ }
+ if ((scsiq->cntl & QC_NO_CALLBACK) == 0) {
+ (*asc_isr_callback) (asc_dvc, scsiq);
+ } else {
+ if ((AscReadLramByte(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_CDB_BEG)) ==
+ START_STOP)) {
+ asc_dvc->unit_not_ready &= ~target_id;
+ if (scsiq->d3.done_stat != QD_NO_ERROR) {
+ asc_dvc->start_motor &= ~target_id;
+ }
+ }
+ }
+ return (1);
+ } else {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS);
+ FATAL_ERR_QDONE:
+ if ((scsiq->cntl & QC_NO_CALLBACK) == 0) {
+ (*asc_isr_callback) (asc_dvc, scsiq);
+ }
+ return (0x80);
+ }
+ }
+ return (0);
+}
+
+STATIC int
+AscISR(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ ASC_CS_TYPE chipstat;
+ PortAddr iop_base;
+ ushort saved_ram_addr;
+ uchar ctrl_reg;
+ uchar saved_ctrl_reg;
+ int int_pending;
+ int status;
+ uchar host_flag;
+
+ iop_base = asc_dvc->iop_base;
+ int_pending = FALSE;
+
+ if (AscIsIntPending(iop_base) == 0)
+ {
+ return int_pending;
+ }
+
+ if (((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0)
+ || (asc_dvc->isr_callback == 0)
+) {
+ return (ERR);
+ }
+ if (asc_dvc->in_critical_cnt != 0) {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL);
+ return (ERR);
+ }
+ if (asc_dvc->is_in_int) {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY);
+ return (ERR);
+ }
+ asc_dvc->is_in_int = TRUE;
+ ctrl_reg = AscGetChipControl(iop_base);
+ saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET |
+ CC_SINGLE_STEP | CC_DIAG | CC_TEST));
+ chipstat = AscGetChipStatus(iop_base);
+ if (chipstat & CSW_SCSI_RESET_LATCH) {
+ if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) {
+ int i = 10;
+ int_pending = TRUE;
+ asc_dvc->sdtr_done = 0;
+ saved_ctrl_reg &= (uchar) (~CC_HALT);
+ while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE) &&
+ (i-- > 0))
+ {
+ DvcSleepMilliSecond(100);
+ }
+ AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT));
+ AscSetChipControl(iop_base, CC_HALT);
+ AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT);
+ AscSetChipStatus(iop_base, 0);
+ chipstat = AscGetChipStatus(iop_base);
+ }
+ }
+ saved_ram_addr = AscGetChipLramAddr(iop_base);
+ host_flag = AscReadLramByte(iop_base,
+ ASCV_HOST_FLAG_B) & (uchar) (~ASC_HOST_FLAG_IN_ISR);
+ AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B,
+ (uchar) (host_flag | (uchar) ASC_HOST_FLAG_IN_ISR));
+ if ((chipstat & CSW_INT_PENDING)
+ || (int_pending)
+) {
+ AscAckInterrupt(iop_base);
+ int_pending = TRUE;
+ if ((chipstat & CSW_HALTED) &&
+ (ctrl_reg & CC_SINGLE_STEP)) {
+ if (AscIsrChipHalted(asc_dvc) == ERR) {
+ goto ISR_REPORT_QDONE_FATAL_ERROR;
+ } else {
+ saved_ctrl_reg &= (uchar) (~CC_HALT);
+ }
+ } else {
+ ISR_REPORT_QDONE_FATAL_ERROR:
+ if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) {
+ while (((status = AscIsrQDone(asc_dvc)) & 0x01) != 0) {
+ }
+ } else {
+ do {
+ if ((status = AscIsrQDone(asc_dvc)) == 1) {
+ break;
+ }
+ } while (status == 0x11);
+ }
+ if ((status & 0x80) != 0)
+ int_pending = ERR;
+ }
+ }
+ AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
+ AscSetChipLramAddr(iop_base, saved_ram_addr);
+ AscSetChipControl(iop_base, saved_ctrl_reg);
+ asc_dvc->is_in_int = FALSE;
+ return (int_pending);
+}
+
+/* Microcode buffer is kept after initialization for error recovery. */
+STATIC uchar _asc_mcode_buf[] =
+{
+ 0x01, 0x03, 0x01, 0x19, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xC3, 0x12, 0x0D, 0x05, 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xFF, 0x80, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x23, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE4, 0x88, 0x00, 0x00, 0x00, 0x00,
+ 0x80, 0x73, 0x48, 0x04, 0x36, 0x00, 0x00, 0xA2, 0xC2, 0x00, 0x80, 0x73, 0x03, 0x23, 0x36, 0x40,
+ 0xB6, 0x00, 0x36, 0x00, 0x05, 0xD6, 0x0C, 0xD2, 0x12, 0xDA, 0x00, 0xA2, 0xC2, 0x00, 0x92, 0x80,
+ 0x1E, 0x98, 0x50, 0x00, 0xF5, 0x00, 0x48, 0x98, 0xDF, 0x23, 0x36, 0x60, 0xB6, 0x00, 0x92, 0x80,
+ 0x4F, 0x00, 0xF5, 0x00, 0x48, 0x98, 0xEF, 0x23, 0x36, 0x60, 0xB6, 0x00, 0x92, 0x80, 0x80, 0x62,
+ 0x92, 0x80, 0x00, 0x46, 0x15, 0xEE, 0x13, 0xEA, 0x02, 0x01, 0x09, 0xD8, 0xCD, 0x04, 0x4D, 0x00,
+ 0x00, 0xA3, 0xD6, 0x00, 0xA6, 0x97, 0x7F, 0x23, 0x04, 0x61, 0x84, 0x01, 0xE6, 0x84, 0xD2, 0xC1,
+ 0x80, 0x73, 0xCD, 0x04, 0x4D, 0x00, 0x00, 0xA3, 0xDA, 0x01, 0xA6, 0x97, 0xC6, 0x81, 0xC2, 0x88,
+ 0x80, 0x73, 0x80, 0x77, 0x00, 0x01, 0x01, 0xA1, 0xFE, 0x00, 0x4F, 0x00, 0x84, 0x97, 0x07, 0xA6,
+ 0x08, 0x01, 0x00, 0x33, 0x03, 0x00, 0xC2, 0x88, 0x03, 0x03, 0x01, 0xDE, 0xC2, 0x88, 0xCE, 0x00,
+ 0x69, 0x60, 0xCE, 0x00, 0x02, 0x03, 0x4A, 0x60, 0x00, 0xA2, 0x78, 0x01, 0x80, 0x63, 0x07, 0xA6,
+ 0x24, 0x01, 0x78, 0x81, 0x03, 0x03, 0x80, 0x63, 0xE2, 0x00, 0x07, 0xA6, 0x34, 0x01, 0x00, 0x33,
+ 0x04, 0x00, 0xC2, 0x88, 0x03, 0x07, 0x02, 0x01, 0x04, 0xCA, 0x0D, 0x23, 0x68, 0x98, 0x4D, 0x04,
+ 0x04, 0x85, 0x05, 0xD8, 0x0D, 0x23, 0x68, 0x98, 0xCD, 0x04, 0x15, 0x23, 0xF8, 0x88, 0xFB, 0x23,
+ 0x02, 0x61, 0x82, 0x01, 0x80, 0x63, 0x02, 0x03, 0x06, 0xA3, 0x62, 0x01, 0x00, 0x33, 0x0A, 0x00,
+ 0xC2, 0x88, 0x4E, 0x00, 0x07, 0xA3, 0x6E, 0x01, 0x00, 0x33, 0x0B, 0x00, 0xC2, 0x88, 0xCD, 0x04,
+ 0x36, 0x2D, 0x00, 0x33, 0x1A, 0x00, 0xC2, 0x88, 0x50, 0x04, 0x88, 0x81, 0x06, 0xAB, 0x82, 0x01,
+ 0x88, 0x81, 0x4E, 0x00, 0x07, 0xA3, 0x92, 0x01, 0x50, 0x00, 0x00, 0xA3, 0x3C, 0x01, 0x00, 0x05,
+ 0x7C, 0x81, 0x46, 0x97, 0x02, 0x01, 0x05, 0xC6, 0x04, 0x23, 0xA0, 0x01, 0x15, 0x23, 0xA1, 0x01,
+ 0xBE, 0x81, 0xFD, 0x23, 0x02, 0x61, 0x82, 0x01, 0x0A, 0xDA, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA0,
+ 0xB4, 0x01, 0x80, 0x63, 0xCD, 0x04, 0x36, 0x2D, 0x00, 0x33, 0x1B, 0x00, 0xC2, 0x88, 0x06, 0x23,
+ 0x68, 0x98, 0xCD, 0x04, 0xE6, 0x84, 0x06, 0x01, 0x00, 0xA2, 0xD4, 0x01, 0x57, 0x60, 0x00, 0xA0,
+ 0xDA, 0x01, 0xE6, 0x84, 0x80, 0x23, 0xA0, 0x01, 0xE6, 0x84, 0x80, 0x73, 0x4B, 0x00, 0x06, 0x61,
+ 0x00, 0xA2, 0x00, 0x02, 0x04, 0x01, 0x0C, 0xDE, 0x02, 0x01, 0x03, 0xCC, 0x4F, 0x00, 0x84, 0x97,
+ 0xFC, 0x81, 0x08, 0x23, 0x02, 0x41, 0x82, 0x01, 0x4F, 0x00, 0x62, 0x97, 0x48, 0x04, 0x84, 0x80,
+ 0xF0, 0x97, 0x00, 0x46, 0x56, 0x00, 0x03, 0xC0, 0x01, 0x23, 0xE8, 0x00, 0x81, 0x73, 0x06, 0x29,
+ 0x03, 0x42, 0x06, 0xE2, 0x03, 0xEE, 0x6B, 0xEB, 0x11, 0x23, 0xF8, 0x88, 0x04, 0x98, 0xF0, 0x80,
+ 0x80, 0x73, 0x80, 0x77, 0x07, 0xA4, 0x2A, 0x02, 0x7C, 0x95, 0x06, 0xA6, 0x34, 0x02, 0x03, 0xA6,
+ 0x4C, 0x04, 0x46, 0x82, 0x04, 0x01, 0x03, 0xD8, 0xB4, 0x98, 0x6A, 0x96, 0x46, 0x82, 0xFE, 0x95,
+ 0x80, 0x67, 0x83, 0x03, 0x80, 0x63, 0xB6, 0x2D, 0x02, 0xA6, 0x6C, 0x02, 0x07, 0xA6, 0x5A, 0x02,
+ 0x06, 0xA6, 0x5E, 0x02, 0x03, 0xA6, 0x62, 0x02, 0xC2, 0x88, 0x7C, 0x95, 0x48, 0x82, 0x60, 0x96,
+ 0x48, 0x82, 0x04, 0x23, 0xA0, 0x01, 0x14, 0x23, 0xA1, 0x01, 0x3C, 0x84, 0x04, 0x01, 0x0C, 0xDC,
+ 0xE0, 0x23, 0x25, 0x61, 0xEF, 0x00, 0x14, 0x01, 0x4F, 0x04, 0xA8, 0x01, 0x6F, 0x00, 0xA5, 0x01,
+ 0x03, 0x23, 0xA4, 0x01, 0x06, 0x23, 0x9C, 0x01, 0x24, 0x2B, 0x1C, 0x01, 0x02, 0xA6, 0xAA, 0x02,
+ 0x07, 0xA6, 0x5A, 0x02, 0x06, 0xA6, 0x5E, 0x02, 0x03, 0xA6, 0x20, 0x04, 0x01, 0xA6, 0xB4, 0x02,
+ 0x00, 0xA6, 0xB4, 0x02, 0x00, 0x33, 0x12, 0x00, 0xC2, 0x88, 0x00, 0x0E, 0x80, 0x63, 0x00, 0x43,
+ 0x00, 0xA0, 0x8C, 0x02, 0x4D, 0x04, 0x04, 0x01, 0x0B, 0xDC, 0xE7, 0x23, 0x04, 0x61, 0x84, 0x01,
+ 0x10, 0x31, 0x12, 0x35, 0x14, 0x01, 0xEC, 0x00, 0x6C, 0x38, 0x00, 0x3F, 0x00, 0x00, 0xEA, 0x82,
+ 0x18, 0x23, 0x04, 0x61, 0x18, 0xA0, 0xE2, 0x02, 0x04, 0x01, 0xA2, 0xC8, 0x00, 0x33, 0x1F, 0x00,
+ 0xC2, 0x88, 0x08, 0x31, 0x0A, 0x35, 0x0C, 0x39, 0x0E, 0x3D, 0x7E, 0x98, 0xB6, 0x2D, 0x01, 0xA6,
+ 0x14, 0x03, 0x00, 0xA6, 0x14, 0x03, 0x07, 0xA6, 0x0C, 0x03, 0x06, 0xA6, 0x10, 0x03, 0x03, 0xA6,
+ 0x20, 0x04, 0x02, 0xA6, 0x6C, 0x02, 0x00, 0x33, 0x33, 0x00, 0xC2, 0x88, 0x7C, 0x95, 0xEE, 0x82,
+ 0x60, 0x96, 0xEE, 0x82, 0x82, 0x98, 0x80, 0x42, 0x7E, 0x98, 0x64, 0xE4, 0x04, 0x01, 0x2D, 0xC8,
+ 0x31, 0x05, 0x07, 0x01, 0x00, 0xA2, 0x54, 0x03, 0x00, 0x43, 0x87, 0x01, 0x05, 0x05, 0x86, 0x98,
+ 0x7E, 0x98, 0x00, 0xA6, 0x16, 0x03, 0x07, 0xA6, 0x4C, 0x03, 0x03, 0xA6, 0x3C, 0x04, 0x06, 0xA6,
+ 0x50, 0x03, 0x01, 0xA6, 0x16, 0x03, 0x00, 0x33, 0x25, 0x00, 0xC2, 0x88, 0x7C, 0x95, 0x32, 0x83,
+ 0x60, 0x96, 0x32, 0x83, 0x04, 0x01, 0x10, 0xCE, 0x07, 0xC8, 0x05, 0x05, 0xEB, 0x04, 0x00, 0x33,
+ 0x00, 0x20, 0xC0, 0x20, 0x81, 0x62, 0x72, 0x83, 0x00, 0x01, 0x05, 0x05, 0xFF, 0xA2, 0x7A, 0x03,
+ 0xB1, 0x01, 0x08, 0x23, 0xB2, 0x01, 0x2E, 0x83, 0x05, 0x05, 0x15, 0x01, 0x00, 0xA2, 0x9A, 0x03,
+ 0xEC, 0x00, 0x6E, 0x00, 0x95, 0x01, 0x6C, 0x38, 0x00, 0x3F, 0x00, 0x00, 0x01, 0xA6, 0x96, 0x03,
+ 0x00, 0xA6, 0x96, 0x03, 0x10, 0x84, 0x80, 0x42, 0x7E, 0x98, 0x01, 0xA6, 0xA4, 0x03, 0x00, 0xA6,
+ 0xBC, 0x03, 0x10, 0x84, 0xA8, 0x98, 0x80, 0x42, 0x01, 0xA6, 0xA4, 0x03, 0x07, 0xA6, 0xB2, 0x03,
+ 0xD4, 0x83, 0x7C, 0x95, 0xA8, 0x83, 0x00, 0x33, 0x2F, 0x00, 0xC2, 0x88, 0xA8, 0x98, 0x80, 0x42,
+ 0x00, 0xA6, 0xBC, 0x03, 0x07, 0xA6, 0xCA, 0x03, 0xD4, 0x83, 0x7C, 0x95, 0xC0, 0x83, 0x00, 0x33,
+ 0x26, 0x00, 0xC2, 0x88, 0x38, 0x2B, 0x80, 0x32, 0x80, 0x36, 0x04, 0x23, 0xA0, 0x01, 0x12, 0x23,
+ 0xA1, 0x01, 0x10, 0x84, 0x07, 0xF0, 0x06, 0xA4, 0xF4, 0x03, 0x80, 0x6B, 0x80, 0x67, 0x05, 0x23,
+ 0x83, 0x03, 0x80, 0x63, 0x03, 0xA6, 0x0E, 0x04, 0x07, 0xA6, 0x06, 0x04, 0x06, 0xA6, 0x0A, 0x04,
+ 0x00, 0x33, 0x17, 0x00, 0xC2, 0x88, 0x7C, 0x95, 0xF4, 0x83, 0x60, 0x96, 0xF4, 0x83, 0x20, 0x84,
+ 0x07, 0xF0, 0x06, 0xA4, 0x20, 0x04, 0x80, 0x6B, 0x80, 0x67, 0x05, 0x23, 0x83, 0x03, 0x80, 0x63,
+ 0xB6, 0x2D, 0x03, 0xA6, 0x3C, 0x04, 0x07, 0xA6, 0x34, 0x04, 0x06, 0xA6, 0x38, 0x04, 0x00, 0x33,
+ 0x30, 0x00, 0xC2, 0x88, 0x7C, 0x95, 0x20, 0x84, 0x60, 0x96, 0x20, 0x84, 0x1D, 0x01, 0x06, 0xCC,
+ 0x00, 0x33, 0x00, 0x84, 0xC0, 0x20, 0x00, 0x23, 0xEA, 0x00, 0x81, 0x62, 0xA2, 0x0D, 0x80, 0x63,
+ 0x07, 0xA6, 0x5A, 0x04, 0x00, 0x33, 0x18, 0x00, 0xC2, 0x88, 0x03, 0x03, 0x80, 0x63, 0xA3, 0x01,
+ 0x07, 0xA4, 0x64, 0x04, 0x23, 0x01, 0x00, 0xA2, 0x86, 0x04, 0x0A, 0xA0, 0x76, 0x04, 0xE0, 0x00,
+ 0x00, 0x33, 0x1D, 0x00, 0xC2, 0x88, 0x0B, 0xA0, 0x82, 0x04, 0xE0, 0x00, 0x00, 0x33, 0x1E, 0x00,
+ 0xC2, 0x88, 0x42, 0x23, 0xF8, 0x88, 0x00, 0x23, 0x22, 0xA3, 0xE6, 0x04, 0x08, 0x23, 0x22, 0xA3,
+ 0xA2, 0x04, 0x28, 0x23, 0x22, 0xA3, 0xAE, 0x04, 0x02, 0x23, 0x22, 0xA3, 0xC4, 0x04, 0x42, 0x23,
+ 0xF8, 0x88, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA0, 0xAE, 0x04, 0x45, 0x23, 0xF8, 0x88, 0x04, 0x98,
+ 0x00, 0xA2, 0xC0, 0x04, 0xB4, 0x98, 0x00, 0x33, 0x00, 0x82, 0xC0, 0x20, 0x81, 0x62, 0xE8, 0x81,
+ 0x47, 0x23, 0xF8, 0x88, 0x04, 0x01, 0x0B, 0xDE, 0x04, 0x98, 0xB4, 0x98, 0x00, 0x33, 0x00, 0x81,
+ 0xC0, 0x20, 0x81, 0x62, 0x14, 0x01, 0x00, 0xA0, 0x00, 0x02, 0x43, 0x23, 0xF8, 0x88, 0x04, 0x23,
+ 0xA0, 0x01, 0x44, 0x23, 0xA1, 0x01, 0x80, 0x73, 0x4D, 0x00, 0x03, 0xA3, 0xF4, 0x04, 0x00, 0x33,
+ 0x27, 0x00, 0xC2, 0x88, 0x04, 0x01, 0x04, 0xDC, 0x02, 0x23, 0xA2, 0x01, 0x04, 0x23, 0xA0, 0x01,
+ 0x04, 0x98, 0x26, 0x95, 0x4B, 0x00, 0xF6, 0x00, 0x4F, 0x04, 0x4F, 0x00, 0x00, 0xA3, 0x22, 0x05,
+ 0x00, 0x05, 0x76, 0x00, 0x06, 0x61, 0x00, 0xA2, 0x1C, 0x05, 0x0A, 0x85, 0x46, 0x97, 0xCD, 0x04,
+ 0x24, 0x85, 0x48, 0x04, 0x84, 0x80, 0x02, 0x01, 0x03, 0xDA, 0x80, 0x23, 0x82, 0x01, 0x34, 0x85,
+ 0x02, 0x23, 0xA0, 0x01, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA2, 0x40, 0x05, 0x1D, 0x01, 0x04, 0xD6,
+ 0xFF, 0x23, 0x86, 0x41, 0x4B, 0x60, 0xCB, 0x00, 0xFF, 0x23, 0x80, 0x01, 0x49, 0x00, 0x81, 0x01,
+ 0x04, 0x01, 0x02, 0xC8, 0x30, 0x01, 0x80, 0x01, 0xF7, 0x04, 0x03, 0x01, 0x49, 0x04, 0x80, 0x01,
+ 0xC9, 0x00, 0x00, 0x05, 0x00, 0x01, 0xFF, 0xA0, 0x60, 0x05, 0x77, 0x04, 0x01, 0x23, 0xEA, 0x00,
+ 0x5D, 0x00, 0xFE, 0xC7, 0x00, 0x62, 0x00, 0x23, 0xEA, 0x00, 0x00, 0x63, 0x07, 0xA4, 0xF8, 0x05,
+ 0x03, 0x03, 0x02, 0xA0, 0x8E, 0x05, 0xF4, 0x85, 0x00, 0x33, 0x2D, 0x00, 0xC2, 0x88, 0x04, 0xA0,
+ 0xB8, 0x05, 0x80, 0x63, 0x00, 0x23, 0xDF, 0x00, 0x4A, 0x00, 0x06, 0x61, 0x00, 0xA2, 0xA4, 0x05,
+ 0x1D, 0x01, 0x06, 0xD6, 0x02, 0x23, 0x02, 0x41, 0x82, 0x01, 0x50, 0x00, 0x62, 0x97, 0x04, 0x85,
+ 0x04, 0x23, 0x02, 0x41, 0x82, 0x01, 0x04, 0x85, 0x08, 0xA0, 0xBE, 0x05, 0xF4, 0x85, 0x03, 0xA0,
+ 0xC4, 0x05, 0xF4, 0x85, 0x01, 0xA0, 0xCE, 0x05, 0x88, 0x00, 0x80, 0x63, 0xCC, 0x86, 0x07, 0xA0,
+ 0xEE, 0x05, 0x5F, 0x00, 0x00, 0x2B, 0xDF, 0x08, 0x00, 0xA2, 0xE6, 0x05, 0x80, 0x67, 0x80, 0x63,
+ 0x01, 0xA2, 0x7A, 0x06, 0x7C, 0x85, 0x06, 0x23, 0x68, 0x98, 0x48, 0x23, 0xF8, 0x88, 0x07, 0x23,
+ 0x80, 0x00, 0x06, 0x87, 0x80, 0x63, 0x7C, 0x85, 0x00, 0x23, 0xDF, 0x00, 0x00, 0x63, 0x4A, 0x00,
+ 0x06, 0x61, 0x00, 0xA2, 0x36, 0x06, 0x1D, 0x01, 0x16, 0xD4, 0xC0, 0x23, 0x07, 0x41, 0x83, 0x03,
+ 0x80, 0x63, 0x06, 0xA6, 0x1C, 0x06, 0x00, 0x33, 0x37, 0x00, 0xC2, 0x88, 0x1D, 0x01, 0x01, 0xD6,
+ 0x20, 0x23, 0x63, 0x60, 0x83, 0x03, 0x80, 0x63, 0x02, 0x23, 0xDF, 0x00, 0x07, 0xA6, 0x7C, 0x05,
+ 0xEF, 0x04, 0x6F, 0x00, 0x00, 0x63, 0x4B, 0x00, 0x06, 0x41, 0xCB, 0x00, 0x52, 0x00, 0x06, 0x61,
+ 0x00, 0xA2, 0x4E, 0x06, 0x1D, 0x01, 0x03, 0xCA, 0xC0, 0x23, 0x07, 0x41, 0x00, 0x63, 0x1D, 0x01,
+ 0x04, 0xCC, 0x00, 0x33, 0x00, 0x83, 0xC0, 0x20, 0x81, 0x62, 0x80, 0x23, 0x07, 0x41, 0x00, 0x63,
+ 0x80, 0x67, 0x08, 0x23, 0x83, 0x03, 0x80, 0x63, 0x00, 0x63, 0x01, 0x23, 0xDF, 0x00, 0x06, 0xA6,
+ 0x84, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x80, 0x67, 0x80, 0x63, 0x00, 0x33, 0x00, 0x40, 0xC0, 0x20,
+ 0x81, 0x62, 0x00, 0x63, 0x00, 0x00, 0xFE, 0x95, 0x83, 0x03, 0x80, 0x63, 0x06, 0xA6, 0x94, 0x06,
+ 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x00, 0x01, 0xA0, 0x14, 0x07, 0x00, 0x2B, 0x40, 0x0E, 0x80, 0x63,
+ 0x01, 0x00, 0x06, 0xA6, 0xAA, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x40, 0x0E, 0x80, 0x63, 0x00, 0x43,
+ 0x00, 0xA0, 0xA2, 0x06, 0x06, 0xA6, 0xBC, 0x06, 0x07, 0xA6, 0x7C, 0x05, 0x80, 0x67, 0x40, 0x0E,
+ 0x80, 0x63, 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x23, 0xDF, 0x00, 0x00, 0x63, 0x07, 0xA6, 0xD6, 0x06,
+ 0x00, 0x33, 0x2A, 0x00, 0xC2, 0x88, 0x03, 0x03, 0x80, 0x63, 0x89, 0x00, 0x0A, 0x2B, 0x07, 0xA6,
+ 0xE8, 0x06, 0x00, 0x33, 0x29, 0x00, 0xC2, 0x88, 0x00, 0x43, 0x00, 0xA2, 0xF4, 0x06, 0xC0, 0x0E,
+ 0x80, 0x63, 0xDE, 0x86, 0xC0, 0x0E, 0x00, 0x33, 0x00, 0x80, 0xC0, 0x20, 0x81, 0x62, 0x04, 0x01,
+ 0x02, 0xDA, 0x80, 0x63, 0x7C, 0x85, 0x80, 0x7B, 0x80, 0x63, 0x06, 0xA6, 0x8C, 0x06, 0x00, 0x33,
+ 0x2C, 0x00, 0xC2, 0x88, 0x0C, 0xA2, 0x2E, 0x07, 0xFE, 0x95, 0x83, 0x03, 0x80, 0x63, 0x06, 0xA6,
+ 0x2C, 0x07, 0x07, 0xA6, 0x7C, 0x05, 0x00, 0x33, 0x3D, 0x00, 0xC2, 0x88, 0x00, 0x00, 0x80, 0x67,
+ 0x83, 0x03, 0x80, 0x63, 0x0C, 0xA0, 0x44, 0x07, 0x07, 0xA6, 0x7C, 0x05, 0xBF, 0x23, 0x04, 0x61,
+ 0x84, 0x01, 0xE6, 0x84, 0x00, 0x63, 0xF0, 0x04, 0x01, 0x01, 0xF1, 0x00, 0x00, 0x01, 0xF2, 0x00,
+ 0x01, 0x05, 0x80, 0x01, 0x72, 0x04, 0x71, 0x00, 0x81, 0x01, 0x70, 0x04, 0x80, 0x05, 0x81, 0x05,
+ 0x00, 0x63, 0xF0, 0x04, 0xF2, 0x00, 0x72, 0x04, 0x01, 0x01, 0xF1, 0x00, 0x70, 0x00, 0x81, 0x01,
+ 0x70, 0x04, 0x71, 0x00, 0x81, 0x01, 0x72, 0x00, 0x80, 0x01, 0x71, 0x04, 0x70, 0x00, 0x80, 0x01,
+ 0x70, 0x04, 0x00, 0x63, 0xF0, 0x04, 0xF2, 0x00, 0x72, 0x04, 0x00, 0x01, 0xF1, 0x00, 0x70, 0x00,
+ 0x80, 0x01, 0x70, 0x04, 0x71, 0x00, 0x80, 0x01, 0x72, 0x00, 0x81, 0x01, 0x71, 0x04, 0x70, 0x00,
+ 0x81, 0x01, 0x70, 0x04, 0x00, 0x63, 0x00, 0x23, 0xB3, 0x01, 0x83, 0x05, 0xA3, 0x01, 0xA2, 0x01,
+ 0xA1, 0x01, 0x01, 0x23, 0xA0, 0x01, 0x00, 0x01, 0xC8, 0x00, 0x03, 0xA1, 0xC4, 0x07, 0x00, 0x33,
+ 0x07, 0x00, 0xC2, 0x88, 0x80, 0x05, 0x81, 0x05, 0x04, 0x01, 0x11, 0xC8, 0x48, 0x00, 0xB0, 0x01,
+ 0xB1, 0x01, 0x08, 0x23, 0xB2, 0x01, 0x05, 0x01, 0x48, 0x04, 0x00, 0x43, 0x00, 0xA2, 0xE4, 0x07,
+ 0x00, 0x05, 0xDA, 0x87, 0x00, 0x01, 0xC8, 0x00, 0xFF, 0x23, 0x80, 0x01, 0x05, 0x05, 0x00, 0x63,
+ 0xF7, 0x04, 0x1A, 0x09, 0xF6, 0x08, 0x6E, 0x04, 0x00, 0x02, 0x80, 0x43, 0x76, 0x08, 0x80, 0x02,
+ 0x77, 0x04, 0x00, 0x63, 0xF7, 0x04, 0x1A, 0x09, 0xF6, 0x08, 0x6E, 0x04, 0x00, 0x02, 0x00, 0xA0,
+ 0x14, 0x08, 0x16, 0x88, 0x00, 0x43, 0x76, 0x08, 0x80, 0x02, 0x77, 0x04, 0x00, 0x63, 0xF3, 0x04,
+ 0x00, 0x23, 0xF4, 0x00, 0x74, 0x00, 0x80, 0x43, 0xF4, 0x00, 0xCF, 0x40, 0x00, 0xA2, 0x44, 0x08,
+ 0x74, 0x04, 0x02, 0x01, 0xF7, 0xC9, 0xF6, 0xD9, 0x00, 0x01, 0x01, 0xA1, 0x24, 0x08, 0x04, 0x98,
+ 0x26, 0x95, 0x24, 0x88, 0x73, 0x04, 0x00, 0x63, 0xF3, 0x04, 0x75, 0x04, 0x5A, 0x88, 0x02, 0x01,
+ 0x04, 0xD8, 0x46, 0x97, 0x04, 0x98, 0x26, 0x95, 0x4A, 0x88, 0x75, 0x00, 0x00, 0xA3, 0x64, 0x08,
+ 0x00, 0x05, 0x4E, 0x88, 0x73, 0x04, 0x00, 0x63, 0x80, 0x7B, 0x80, 0x63, 0x06, 0xA6, 0x76, 0x08,
+ 0x00, 0x33, 0x3E, 0x00, 0xC2, 0x88, 0x80, 0x67, 0x83, 0x03, 0x80, 0x63, 0x00, 0x63, 0x38, 0x2B,
+ 0x9C, 0x88, 0x38, 0x2B, 0x92, 0x88, 0x32, 0x09, 0x31, 0x05, 0x92, 0x98, 0x05, 0x05, 0xB2, 0x09,
+ 0x00, 0x63, 0x00, 0x32, 0x00, 0x36, 0x00, 0x3A, 0x00, 0x3E, 0x00, 0x63, 0x80, 0x32, 0x80, 0x36,
+ 0x80, 0x3A, 0x80, 0x3E, 0xB4, 0x3D, 0x00, 0x63, 0x38, 0x2B, 0x40, 0x32, 0x40, 0x36, 0x40, 0x3A,
+ 0x40, 0x3E, 0x00, 0x63, 0x5A, 0x20, 0xC9, 0x40, 0x00, 0xA0, 0xB4, 0x08, 0x5D, 0x00, 0xFE, 0xC3,
+ 0x00, 0x63, 0x80, 0x73, 0xE6, 0x20, 0x02, 0x23, 0xE8, 0x00, 0x82, 0x73, 0xFF, 0xFD, 0x80, 0x73,
+ 0x13, 0x23, 0xF8, 0x88, 0x66, 0x20, 0xC0, 0x20, 0x04, 0x23, 0xA0, 0x01, 0xA1, 0x23, 0xA1, 0x01,
+ 0x81, 0x62, 0xE2, 0x88, 0x80, 0x73, 0x80, 0x77, 0x68, 0x00, 0x00, 0xA2, 0x80, 0x00, 0x03, 0xC2,
+ 0xF1, 0xC7, 0x41, 0x23, 0xF8, 0x88, 0x11, 0x23, 0xA1, 0x01, 0x04, 0x23, 0xA0, 0x01, 0xE6, 0x84,
+};
+
+STATIC ushort _asc_mcode_size = sizeof(_asc_mcode_buf);
+STATIC ADV_DCNT _asc_mcode_chksum = 0x012C453FUL;
+
+#define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16
+STATIC uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] =
+{
+ INQUIRY,
+ REQUEST_SENSE,
+ READ_CAPACITY,
+ READ_TOC,
+ MODE_SELECT,
+ MODE_SENSE,
+ MODE_SELECT_10,
+ MODE_SENSE_10,
+ 0xFF,
+ 0xFF,
+ 0xFF,
+ 0xFF,
+ 0xFF,
+ 0xFF,
+ 0xFF,
+ 0xFF
+};
+
+STATIC int
+AscExeScsiQueue(
+ ASC_DVC_VAR *asc_dvc,
+ ASC_SCSI_Q *scsiq
+)
+{
+ PortAddr iop_base;
+ ulong last_int_level;
+ int sta;
+ int n_q_required;
+ int disable_syn_offset_one_fix;
+ int i;
+ ASC_PADDR addr;
+ ASC_EXE_CALLBACK asc_exe_callback;
+ ushort sg_entry_cnt = 0;
+ ushort sg_entry_cnt_minus_one = 0;
+ uchar target_ix;
+ uchar tid_no;
+ uchar sdtr_data;
+ uchar extra_bytes;
+ uchar scsi_cmd;
+ uchar disable_cmd;
+ ASC_SG_HEAD *sg_head;
+ ASC_DCNT data_cnt;
+
+ iop_base = asc_dvc->iop_base;
+ sg_head = scsiq->sg_head;
+ asc_exe_callback = asc_dvc->exe_callback;
+ if (asc_dvc->err_code != 0)
+ return (ERR);
+ if (scsiq == (ASC_SCSI_Q *) 0L) {
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_SCSIQ_NULL_PTR);
+ return (ERR);
+ }
+ scsiq->q1.q_no = 0;
+ if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) {
+ scsiq->q1.extra_bytes = 0;
+ }
+ sta = 0;
+ target_ix = scsiq->q2.target_ix;
+ tid_no = ASC_TIX_TO_TID(target_ix);
+ n_q_required = 1;
+ if (scsiq->cdbptr[0] == REQUEST_SENSE) {
+ if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) {
+ asc_dvc->sdtr_done &= ~scsiq->q1.target_id;
+ sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
+ AscMsgOutSDTR(asc_dvc,
+ asc_dvc->sdtr_period_tbl[(sdtr_data >> 4) &
+ (uchar) (asc_dvc->max_sdtr_index - 1)],
+ (uchar) (sdtr_data & (uchar) ASC_SYN_MAX_OFFSET));
+ scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT);
+ }
+ }
+ last_int_level = DvcEnterCritical();
+ if (asc_dvc->in_critical_cnt != 0) {
+ DvcLeaveCritical(last_int_level);
+ AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY);
+ return (ERR);
+ }
+ asc_dvc->in_critical_cnt++;
+ if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
+ if ((sg_entry_cnt = sg_head->entry_cnt) == 0) {
+ asc_dvc->in_critical_cnt--;
+ DvcLeaveCritical(last_int_level);
+ return (ERR);
+ }
+#if !CC_VERY_LONG_SG_LIST
+ if (sg_entry_cnt > ASC_MAX_SG_LIST)
+ {
+ asc_dvc->in_critical_cnt--;
+ DvcLeaveCritical(last_int_level);
+ return(ERR);
+ }
+#endif /* !CC_VERY_LONG_SG_LIST */
+ if (sg_entry_cnt == 1) {
+ scsiq->q1.data_addr = (ADV_PADDR) sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = (ADV_DCNT) sg_head->sg_list[0].bytes;
+ scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE);
+ }
+ sg_entry_cnt_minus_one = sg_entry_cnt - 1;
+ }
+ scsi_cmd = scsiq->cdbptr[0];
+ disable_syn_offset_one_fix = FALSE;
+ if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) &&
+ !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) {
+ if (scsiq->q1.cntl & QC_SG_HEAD) {
+ data_cnt = 0;
+ for (i = 0; i < sg_entry_cnt; i++) {
+ data_cnt += (ADV_DCNT) le32_to_cpu(sg_head->sg_list[i].bytes);
+ }
+ } else {
+ data_cnt = le32_to_cpu(scsiq->q1.data_cnt);
+ }
+ if (data_cnt != 0UL) {
+ if (data_cnt < 512UL) {
+ disable_syn_offset_one_fix = TRUE;
+ } else {
+ for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST; i++) {
+ disable_cmd = _syn_offset_one_disable_cmd[i];
+ if (disable_cmd == 0xFF) {
+ break;
+ }
+ if (scsi_cmd == disable_cmd) {
+ disable_syn_offset_one_fix = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ }
+ if (disable_syn_offset_one_fix) {
+ scsiq->q2.tag_code &= ~MSG_SIMPLE_TAG;
+ scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX |
+ ASC_TAG_FLAG_DISABLE_DISCONNECT);
+ } else {
+ scsiq->q2.tag_code &= 0x27;
+ }
+ if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
+ if (asc_dvc->bug_fix_cntl) {
+ if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
+ if ((scsi_cmd == READ_6) ||
+ (scsi_cmd == READ_10)) {
+ addr =
+ (ADV_PADDR) le32_to_cpu(
+ sg_head->sg_list[sg_entry_cnt_minus_one].addr) +
+ (ADV_DCNT) le32_to_cpu(
+ sg_head->sg_list[sg_entry_cnt_minus_one].bytes);
+ extra_bytes = (uchar) ((ushort) addr & 0x0003);
+ if ((extra_bytes != 0) &&
+ ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES)
+ == 0)) {
+ scsiq->q2.tag_code |= ASC_TAG_FLAG_EXTRA_BYTES;
+ scsiq->q1.extra_bytes = extra_bytes;
+ data_cnt = le32_to_cpu(
+ sg_head->sg_list[sg_entry_cnt_minus_one].bytes);
+ data_cnt -= (ASC_DCNT) extra_bytes;
+ sg_head->sg_list[sg_entry_cnt_minus_one].bytes =
+ cpu_to_le32(data_cnt);
+ }
+ }
+ }
+ }
+ sg_head->entry_to_copy = sg_head->entry_cnt;
+#if CC_VERY_LONG_SG_LIST
+ /*
+ * Set the sg_entry_cnt to the maximum possible. The rest of
+ * the SG elements will be copied when the RISC completes the
+ * SG elements that fit and halts.
+ */
+ if (sg_entry_cnt > ASC_MAX_SG_LIST)
+ {
+ sg_entry_cnt = ASC_MAX_SG_LIST;
+ }
+#endif /* CC_VERY_LONG_SG_LIST */
+ n_q_required = AscSgListToQueue(sg_entry_cnt);
+ if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >=
+ (uint) n_q_required) || ((scsiq->q1.cntl & QC_URGENT) != 0)) {
+ if ((sta = AscSendScsiQueue(asc_dvc, scsiq,
+ n_q_required)) == 1) {
+ asc_dvc->in_critical_cnt--;
+ if (asc_exe_callback != 0) {
+ (*asc_exe_callback) (asc_dvc, scsiq);
+ }
+ DvcLeaveCritical(last_int_level);
+ return (sta);
+ }
+ }
+ } else {
+ if (asc_dvc->bug_fix_cntl) {
+ if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
+ if ((scsi_cmd == READ_6) ||
+ (scsi_cmd == READ_10)) {
+ addr = le32_to_cpu(scsiq->q1.data_addr) +
+ le32_to_cpu(scsiq->q1.data_cnt);
+ extra_bytes = (uchar) ((ushort) addr & 0x0003);
+ if ((extra_bytes != 0) &&
+ ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES)
+ == 0)) {
+ data_cnt = le32_to_cpu(scsiq->q1.data_cnt);
+ if (((ushort) data_cnt & 0x01FF) == 0) {
+ scsiq->q2.tag_code |= ASC_TAG_FLAG_EXTRA_BYTES;
+ data_cnt -= (ASC_DCNT) extra_bytes;
+ scsiq->q1.data_cnt = cpu_to_le32(data_cnt);
+ scsiq->q1.extra_bytes = extra_bytes;
+ }
+ }
+ }
+ }
+ }
+ n_q_required = 1;
+ if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) ||
+ ((scsiq->q1.cntl & QC_URGENT) != 0)) {
+ if ((sta = AscSendScsiQueue(asc_dvc, scsiq,
+ n_q_required)) == 1) {
+ asc_dvc->in_critical_cnt--;
+ if (asc_exe_callback != 0) {
+ (*asc_exe_callback) (asc_dvc, scsiq);
+ }
+ DvcLeaveCritical(last_int_level);
+ return (sta);
+ }
+ }
+ }
+ asc_dvc->in_critical_cnt--;
+ DvcLeaveCritical(last_int_level);
+ return (sta);
+}
+
+STATIC int
+AscSendScsiQueue(
+ ASC_DVC_VAR *asc_dvc,
+ ASC_SCSI_Q *scsiq,
+ uchar n_q_required
+)
+{
+ PortAddr iop_base;
+ uchar free_q_head;
+ uchar next_qp;
+ uchar tid_no;
+ uchar target_ix;
+ int sta;
+
+ iop_base = asc_dvc->iop_base;
+ target_ix = scsiq->q2.target_ix;
+ tid_no = ASC_TIX_TO_TID(target_ix);
+ sta = 0;
+ free_q_head = (uchar) AscGetVarFreeQHead(iop_base);
+ if (n_q_required > 1) {
+ if ((next_qp = AscAllocMultipleFreeQueue(iop_base,
+ free_q_head, (uchar) (n_q_required)))
+ != (uchar) ASC_QLINK_END) {
+ asc_dvc->last_q_shortage = 0;
+ scsiq->sg_head->queue_cnt = n_q_required - 1;
+ scsiq->q1.q_no = free_q_head;
+ if ((sta = AscPutReadySgListQueue(asc_dvc, scsiq,
+ free_q_head)) == 1) {
+ AscPutVarFreeQHead(iop_base, next_qp);
+ asc_dvc->cur_total_qng += (uchar) (n_q_required);
+ asc_dvc->cur_dvc_qng[tid_no]++;
+ }
+ return (sta);
+ }
+ } else if (n_q_required == 1) {
+ if ((next_qp = AscAllocFreeQueue(iop_base,
+ free_q_head)) != ASC_QLINK_END) {
+ scsiq->q1.q_no = free_q_head;
+ if ((sta = AscPutReadyQueue(asc_dvc, scsiq,
+ free_q_head)) == 1) {
+ AscPutVarFreeQHead(iop_base, next_qp);
+ asc_dvc->cur_total_qng++;
+ asc_dvc->cur_dvc_qng[tid_no]++;
+ }
+ return (sta);
+ }
+ }
+ return (sta);
+}
+
+STATIC int
+AscSgListToQueue(
+ int sg_list
+)
+{
+ int n_sg_list_qs;
+
+ n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q);
+ if (((sg_list - 1) % ASC_SG_LIST_PER_Q) != 0)
+ n_sg_list_qs++;
+ return (n_sg_list_qs + 1);
+}
+
+
+STATIC uint
+AscGetNumOfFreeQueue(
+ ASC_DVC_VAR *asc_dvc,
+ uchar target_ix,
+ uchar n_qs
+)
+{
+ uint cur_used_qs;
+ uint cur_free_qs;
+ ASC_SCSI_BIT_ID_TYPE target_id;
+ uchar tid_no;
+
+ target_id = ASC_TIX_TO_TARGET_ID(target_ix);
+ tid_no = ASC_TIX_TO_TID(target_ix);
+ if ((asc_dvc->unit_not_ready & target_id) ||
+ (asc_dvc->queue_full_or_busy & target_id)) {
+ return (0);
+ }
+ if (n_qs == 1) {
+ cur_used_qs = (uint) asc_dvc->cur_total_qng +
+ (uint) asc_dvc->last_q_shortage +
+ (uint) ASC_MIN_FREE_Q;
+ } else {
+ cur_used_qs = (uint) asc_dvc->cur_total_qng +
+ (uint) ASC_MIN_FREE_Q;
+ }
+ if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) {
+ cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs;
+ if (asc_dvc->cur_dvc_qng[tid_no] >=
+ asc_dvc->max_dvc_qng[tid_no]) {
+ return (0);
+ }
+ return (cur_free_qs);
+ }
+ if (n_qs > 1) {
+ if ((n_qs > asc_dvc->last_q_shortage) && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q))) {
+ asc_dvc->last_q_shortage = n_qs;
+ }
+ }
+ return (0);
+}
+
+STATIC int
+AscPutReadyQueue(
+ ASC_DVC_VAR *asc_dvc,
+ ASC_SCSI_Q *scsiq,
+ uchar q_no
+)
+{
+ ushort q_addr;
+ uchar tid_no;
+ uchar sdtr_data;
+ uchar syn_period_ix;
+ uchar syn_offset;
+ PortAddr iop_base;
+
+ iop_base = asc_dvc->iop_base;
+ if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) &&
+ ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) {
+ tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix);
+ sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no);
+ syn_period_ix = (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1);
+ syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET;
+ AscMsgOutSDTR(asc_dvc,
+ asc_dvc->sdtr_period_tbl[syn_period_ix],
+ syn_offset);
+ scsiq->q1.cntl |= QC_MSG_OUT;
+ }
+ q_addr = ASC_QNO_TO_QADDR(q_no);
+ if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) {
+ scsiq->q2.tag_code &= ~MSG_SIMPLE_TAG ;
+ }
+ scsiq->q1.status = QS_FREE;
+ AscMemWordCopyPtrToLram(iop_base,
+ q_addr + ASC_SCSIQ_CDB_BEG,
+ (uchar *) scsiq->cdbptr,
+ scsiq->q2.cdb_len >> 1);
+
+ DvcPutScsiQ(iop_base,
+ q_addr + ASC_SCSIQ_CPY_BEG,
+ (uchar *) &scsiq->q1.cntl,
+ ((sizeof(ASC_SCSIQ_1) + sizeof(ASC_SCSIQ_2)) / 2) - 1);
+ AscWriteLramWord(iop_base,
+ (ushort) (q_addr + (ushort) ASC_SCSIQ_B_STATUS),
+ (ushort) (((ushort) scsiq->q1.q_no << 8) | (ushort) QS_READY));
+ return (1);
+}
+
+STATIC int
+AscPutReadySgListQueue(
+ ASC_DVC_VAR *asc_dvc,
+ ASC_SCSI_Q *scsiq,
+ uchar q_no
+)
+{
+ int sta;
+ int i;
+ ASC_SG_HEAD *sg_head;
+ ASC_SG_LIST_Q scsi_sg_q;
+ ASC_DCNT saved_data_addr;
+ ASC_DCNT saved_data_cnt;
+ PortAddr iop_base;
+ ushort sg_list_dwords;
+ ushort sg_index;
+ ushort sg_entry_cnt;
+ ushort q_addr;
+ uchar next_qp;
+
+ iop_base = asc_dvc->iop_base;
+ sg_head = scsiq->sg_head;
+ saved_data_addr = scsiq->q1.data_addr;
+ saved_data_cnt = scsiq->q1.data_cnt;
+ scsiq->q1.data_addr = (ASC_PADDR) sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = (ASC_DCNT) sg_head->sg_list[0].bytes;
+#if CC_VERY_LONG_SG_LIST
+ /*
+ * If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST
+ * then not all SG elements will fit in the allocated queues.
+ * The rest of the SG elements will be copied when the RISC
+ * completes the SG elements that fit and halts.
+ */
+ if (sg_head->entry_cnt > ASC_MAX_SG_LIST)
+ {
+ /*
+ * Set sg_entry_cnt to be the number of SG elements that
+ * will fit in the allocated SG queues. It is minus 1, because
+ * the first SG element is handled above. ASC_MAX_SG_LIST is
+ * already inflated by 1 to account for this. For example it
+ * may be 50 which is 1 + 7 queues * 7 SG elements.
+ */
+ sg_entry_cnt = ASC_MAX_SG_LIST - 1;
+
+ /*
+ * Keep track of remaining number of SG elements that will
+ * need to be handled from a_isr.c.
+ */
+ scsiq->remain_sg_entry_cnt = sg_head->entry_cnt - ASC_MAX_SG_LIST;
+ } else
+ {
+#endif /* CC_VERY_LONG_SG_LIST */
+ /*
+ * Set sg_entry_cnt to be the number of SG elements that
+ * will fit in the allocated SG queues. It is minus 1, because
+ * the first SG element is handled above.
+ */
+ sg_entry_cnt = sg_head->entry_cnt - 1;
+#if CC_VERY_LONG_SG_LIST
+ }
+#endif /* CC_VERY_LONG_SG_LIST */
+ if (sg_entry_cnt != 0) {
+ scsiq->q1.cntl |= QC_SG_HEAD;
+ q_addr = ASC_QNO_TO_QADDR(q_no);
+ sg_index = 1;
+ scsiq->q1.sg_queue_cnt = sg_head->queue_cnt;
+ scsi_sg_q.sg_head_qp = q_no;
+ scsi_sg_q.cntl = QCSG_SG_XFER_LIST;
+ for (i = 0; i < sg_head->queue_cnt; i++) {
+ scsi_sg_q.seq_no = i + 1;
+ if (sg_entry_cnt > ASC_SG_LIST_PER_Q) {
+ sg_list_dwords = (uchar) (ASC_SG_LIST_PER_Q * 2);
+ sg_entry_cnt -= ASC_SG_LIST_PER_Q;
+ if (i == 0) {
+ scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q;
+ scsi_sg_q.sg_cur_list_cnt = ASC_SG_LIST_PER_Q;
+ } else {
+ scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q - 1;
+ scsi_sg_q.sg_cur_list_cnt = ASC_SG_LIST_PER_Q - 1;
+ }
+ } else {
+#if CC_VERY_LONG_SG_LIST
+ /*
+ * This is the last SG queue in the list of
+ * allocated SG queues. If there are more
+ * SG elements than will fit in the allocated
+ * queues, then set the QCSG_SG_XFER_MORE flag.
+ */
+ if (sg_head->entry_cnt > ASC_MAX_SG_LIST)
+ {
+ scsi_sg_q.cntl |= QCSG_SG_XFER_MORE;
+ } else
+ {
+#endif /* CC_VERY_LONG_SG_LIST */
+ scsi_sg_q.cntl |= QCSG_SG_XFER_END;
+#if CC_VERY_LONG_SG_LIST
+ }
+#endif /* CC_VERY_LONG_SG_LIST */
+ sg_list_dwords = sg_entry_cnt << 1;
+ if (i == 0) {
+ scsi_sg_q.sg_list_cnt = sg_entry_cnt;
+ scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt;
+ } else {
+ scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1;
+ scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1;
+ }
+ sg_entry_cnt = 0;
+ }
+ next_qp = AscReadLramByte(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_B_FWD));
+ scsi_sg_q.q_no = next_qp;
+ q_addr = ASC_QNO_TO_QADDR(next_qp);
+ AscMemWordCopyPtrToLram(iop_base,
+ q_addr + ASC_SCSIQ_SGHD_CPY_BEG,
+ (uchar *) &scsi_sg_q,
+ sizeof(ASC_SG_LIST_Q) >> 1);
+ AscMemDWordCopyPtrToLram(iop_base,
+ q_addr + ASC_SGQ_LIST_BEG,
+ (uchar *) &sg_head->sg_list[sg_index],
+ sg_list_dwords);
+ sg_index += ASC_SG_LIST_PER_Q;
+ scsiq->next_sg_index = sg_index;
+ }
+ } else {
+ scsiq->q1.cntl &= ~QC_SG_HEAD;
+ }
+ sta = AscPutReadyQueue(asc_dvc, scsiq, q_no);
+ scsiq->q1.data_addr = saved_data_addr;
+ scsiq->q1.data_cnt = saved_data_cnt;
+ return (sta);
+}
+
+STATIC int
+AscSetRunChipSynRegAtID(
+ PortAddr iop_base,
+ uchar tid_no,
+ uchar sdtr_data
+)
+{
+ int sta = FALSE;
+
+ if (AscHostReqRiscHalt(iop_base)) {
+ sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data);
+ AscStartChip(iop_base);
+ return (sta);
+ }
+ return (sta);
+}
+
+STATIC int
+AscSetChipSynRegAtID(
+ PortAddr iop_base,
+ uchar id,
+ uchar sdtr_data
+)
+{
+ ASC_SCSI_BIT_ID_TYPE org_id;
+ int i;
+ int sta = TRUE;
+
+ AscSetBank(iop_base, 1);
+ org_id = AscReadChipDvcID(iop_base);
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ if (org_id == (0x01 << i))
+ break;
+ }
+ org_id = (ASC_SCSI_BIT_ID_TYPE) i;
+ AscWriteChipDvcID(iop_base, id);
+ if (AscReadChipDvcID(iop_base) == (0x01 << id)) {
+ AscSetBank(iop_base, 0);
+ AscSetChipSyn(iop_base, sdtr_data);
+ if (AscGetChipSyn(iop_base) != sdtr_data) {
+ sta = FALSE;
+ }
+ } else {
+ sta = FALSE;
+ }
+ AscSetBank(iop_base, 1);
+ AscWriteChipDvcID(iop_base, org_id);
+ AscSetBank(iop_base, 0);
+ return (sta);
+}
+
+STATIC ushort
+AscInitLram(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ uchar i;
+ ushort s_addr;
+ PortAddr iop_base;
+ ushort warn_code;
+
+ iop_base = asc_dvc->iop_base;
+ warn_code = 0;
+ AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0,
+ (ushort) (((int) (asc_dvc->max_total_qng + 2 + 1) * 64) >> 1)
+);
+ i = ASC_MIN_ACTIVE_QNO;
+ s_addr = ASC_QADR_BEG + ASC_QBLK_SIZE;
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD),
+ (uchar) (i + 1));
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD),
+ (uchar) (asc_dvc->max_total_qng));
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO),
+ (uchar) i);
+ i++;
+ s_addr += ASC_QBLK_SIZE;
+ for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE) {
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD),
+ (uchar) (i + 1));
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD),
+ (uchar) (i - 1));
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO),
+ (uchar) i);
+ }
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_FWD),
+ (uchar) ASC_QLINK_END);
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_BWD),
+ (uchar) (asc_dvc->max_total_qng - 1));
+ AscWriteLramByte(iop_base, (ushort) (s_addr + ASC_SCSIQ_B_QNO),
+ (uchar) asc_dvc->max_total_qng);
+ i++;
+ s_addr += ASC_QBLK_SIZE;
+ for (; i <= (uchar) (asc_dvc->max_total_qng + 3);
+ i++, s_addr += ASC_QBLK_SIZE) {
+ AscWriteLramByte(iop_base,
+ (ushort) (s_addr + (ushort) ASC_SCSIQ_B_FWD), i);
+ AscWriteLramByte(iop_base,
+ (ushort) (s_addr + (ushort) ASC_SCSIQ_B_BWD), i);
+ AscWriteLramByte(iop_base,
+ (ushort) (s_addr + (ushort) ASC_SCSIQ_B_QNO), i);
+ }
+ return (warn_code);
+}
+
+STATIC ushort
+AscInitQLinkVar(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ PortAddr iop_base;
+ int i;
+ ushort lram_addr;
+
+ iop_base = asc_dvc->iop_base;
+ AscPutRiscVarFreeQHead(iop_base, 1);
+ AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng);
+ AscPutVarFreeQHead(iop_base, 1);
+ AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng);
+ AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B,
+ (uchar) ((int) asc_dvc->max_total_qng + 1));
+ AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B,
+ (uchar) ((int) asc_dvc->max_total_qng + 2));
+ AscWriteLramByte(iop_base, (ushort) ASCV_TOTAL_READY_Q_B,
+ asc_dvc->max_total_qng);
+ AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W, 0);
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
+ AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 0);
+ AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B, 0);
+ AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B, 0);
+ AscPutQDoneInProgress(iop_base, 0);
+ lram_addr = ASC_QADR_BEG;
+ for (i = 0; i < 32; i++, lram_addr += 2) {
+ AscWriteLramWord(iop_base, lram_addr, 0);
+ }
+ return (0);
+}
+
+STATIC int
+AscSetLibErrorCode(
+ ASC_DVC_VAR *asc_dvc,
+ ushort err_code
+)
+{
+ if (asc_dvc->err_code == 0) {
+ asc_dvc->err_code = err_code;
+ AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W,
+ err_code);
+ }
+ return (err_code);
+}
+
+
+STATIC uchar
+AscMsgOutSDTR(
+ ASC_DVC_VAR *asc_dvc,
+ uchar sdtr_period,
+ uchar sdtr_offset
+)
+{
+ EXT_MSG sdtr_buf;
+ uchar sdtr_period_index;
+ PortAddr iop_base;
+
+ iop_base = asc_dvc->iop_base;
+ sdtr_buf.msg_type = MS_EXTEND;
+ sdtr_buf.msg_len = MS_SDTR_LEN;
+ sdtr_buf.msg_req = MS_SDTR_CODE;
+ sdtr_buf.xfer_period = sdtr_period;
+ sdtr_offset &= ASC_SYN_MAX_OFFSET;
+ sdtr_buf.req_ack_offset = sdtr_offset;
+ if ((sdtr_period_index =
+ AscGetSynPeriodIndex(asc_dvc, sdtr_period)) <=
+ asc_dvc->max_sdtr_index) {
+ AscMemWordCopyPtrToLram(iop_base,
+ ASCV_MSGOUT_BEG,
+ (uchar *) &sdtr_buf,
+ sizeof (EXT_MSG) >> 1);
+ return ((sdtr_period_index << 4) | sdtr_offset);
+ } else {
+
+ sdtr_buf.req_ack_offset = 0;
+ AscMemWordCopyPtrToLram(iop_base,
+ ASCV_MSGOUT_BEG,
+ (uchar *) &sdtr_buf,
+ sizeof (EXT_MSG) >> 1);
+ return (0);
+ }
+}
+
+STATIC uchar
+AscCalSDTRData(
+ ASC_DVC_VAR *asc_dvc,
+ uchar sdtr_period,
+ uchar syn_offset
+)
+{
+ uchar byte;
+ uchar sdtr_period_ix;
+
+ sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period);
+ if (
+ (sdtr_period_ix > asc_dvc->max_sdtr_index)
+) {
+ return (0xFF);
+ }
+ byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET);
+ return (byte);
+}
+
+STATIC void
+AscSetChipSDTR(
+ PortAddr iop_base,
+ uchar sdtr_data,
+ uchar tid_no
+)
+{
+ AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data);
+ AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data);
+ return;
+}
+
+STATIC uchar
+AscGetSynPeriodIndex(
+ ASC_DVC_VAR *asc_dvc,
+ uchar syn_time
+)
+{
+ uchar *period_table;
+ int max_index;
+ int min_index;
+ int i;
+
+ period_table = asc_dvc->sdtr_period_tbl;
+ max_index = (int) asc_dvc->max_sdtr_index;
+ min_index = (int)asc_dvc->host_init_sdtr_index;
+ if ((syn_time <= period_table[max_index])) {
+ for (i = min_index; i < (max_index - 1); i++) {
+ if (syn_time <= period_table[i]) {
+ return ((uchar) i);
+ }
+ }
+ return ((uchar) max_index);
+ } else {
+ return ((uchar) (max_index + 1));
+ }
+}
+
+STATIC uchar
+AscAllocFreeQueue(
+ PortAddr iop_base,
+ uchar free_q_head
+)
+{
+ ushort q_addr;
+ uchar next_qp;
+ uchar q_status;
+
+ q_addr = ASC_QNO_TO_QADDR(free_q_head);
+ q_status = (uchar) AscReadLramByte(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_B_STATUS));
+ next_qp = AscReadLramByte(iop_base,
+ (ushort) (q_addr + ASC_SCSIQ_B_FWD));
+ if (((q_status & QS_READY) == 0) && (next_qp != ASC_QLINK_END)) {
+ return (next_qp);
+ }
+ return (ASC_QLINK_END);
+}
+
+STATIC uchar
+AscAllocMultipleFreeQueue(
+ PortAddr iop_base,
+ uchar free_q_head,
+ uchar n_free_q
+)
+{
+ uchar i;
+
+ for (i = 0; i < n_free_q; i++) {
+ if ((free_q_head = AscAllocFreeQueue(iop_base, free_q_head))
+ == ASC_QLINK_END) {
+ return (ASC_QLINK_END);
+ }
+ }
+ return (free_q_head);
+}
+
+STATIC int
+AscHostReqRiscHalt(
+ PortAddr iop_base
+)
+{
+ int count = 0;
+ int sta = 0;
+ uchar saved_stop_code;
+
+ if (AscIsChipHalted(iop_base))
+ return (1);
+ saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B);
+ AscWriteLramByte(iop_base, ASCV_STOP_CODE_B,
+ ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP
+);
+ do {
+ if (AscIsChipHalted(iop_base)) {
+ sta = 1;
+ break;
+ }
+ DvcSleepMilliSecond(100);
+ } while (count++ < 20);
+ AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code);
+ return (sta);
+}
+
+STATIC int
+AscStopQueueExe(
+ PortAddr iop_base
+)
+{
+ int count = 0;
+
+ if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) == 0) {
+ AscWriteLramByte(iop_base, ASCV_STOP_CODE_B,
+ ASC_STOP_REQ_RISC_STOP);
+ do {
+ if (
+ AscReadLramByte(iop_base, ASCV_STOP_CODE_B) &
+ ASC_STOP_ACK_RISC_STOP) {
+ return (1);
+ }
+ DvcSleepMilliSecond(100);
+ } while (count++ < 20);
+ }
+ return (0);
+}
+
+STATIC void
+DvcDelayMicroSecond(ADV_DVC_VAR *asc_dvc, ushort micro_sec)
+{
+ udelay(micro_sec);
+}
+
+STATIC void
+DvcDelayNanoSecond(ASC_DVC_VAR *asc_dvc, ASC_DCNT nano_sec)
+{
+ udelay((nano_sec + 999)/1000);
+}
+
+#ifdef CONFIG_ISA
+STATIC ASC_DCNT __init
+AscGetEisaProductID(
+ PortAddr iop_base)
+{
+ PortAddr eisa_iop;
+ ushort product_id_high, product_id_low;
+ ASC_DCNT product_id;
+
+ eisa_iop = ASC_GET_EISA_SLOT(iop_base) | ASC_EISA_PID_IOP_MASK;
+ product_id_low = inpw(eisa_iop);
+ product_id_high = inpw(eisa_iop + 2);
+ product_id = ((ASC_DCNT) product_id_high << 16) |
+ (ASC_DCNT) product_id_low;
+ return (product_id);
+}
+
+STATIC PortAddr __init
+AscSearchIOPortAddrEISA(
+ PortAddr iop_base)
+{
+ ASC_DCNT eisa_product_id;
+
+ if (iop_base == 0) {
+ iop_base = ASC_EISA_MIN_IOP_ADDR;
+ } else {
+ if (iop_base == ASC_EISA_MAX_IOP_ADDR)
+ return (0);
+ if ((iop_base & 0x0050) == 0x0050) {
+ iop_base += ASC_EISA_BIG_IOP_GAP;
+ } else {
+ iop_base += ASC_EISA_SMALL_IOP_GAP;
+ }
+ }
+ while (iop_base <= ASC_EISA_MAX_IOP_ADDR) {
+ eisa_product_id = AscGetEisaProductID(iop_base);
+ if ((eisa_product_id == ASC_EISA_ID_740) ||
+ (eisa_product_id == ASC_EISA_ID_750)) {
+ if (AscFindSignature(iop_base)) {
+ inpw(iop_base + 4);
+ return (iop_base);
+ }
+ }
+ if (iop_base == ASC_EISA_MAX_IOP_ADDR)
+ return (0);
+ if ((iop_base & 0x0050) == 0x0050) {
+ iop_base += ASC_EISA_BIG_IOP_GAP;
+ } else {
+ iop_base += ASC_EISA_SMALL_IOP_GAP;
+ }
+ }
+ return (0);
+}
+#endif /* CONFIG_ISA */
+
+STATIC int
+AscStartChip(
+ PortAddr iop_base
+)
+{
+ AscSetChipControl(iop_base, 0);
+ if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) {
+ return (0);
+ }
+ return (1);
+}
+
+STATIC int
+AscStopChip(
+ PortAddr iop_base
+)
+{
+ uchar cc_val;
+
+ cc_val = AscGetChipControl(iop_base) & (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG));
+ AscSetChipControl(iop_base, (uchar) (cc_val | CC_HALT));
+ AscSetChipIH(iop_base, INS_HALT);
+ AscSetChipIH(iop_base, INS_RFLAG_WTM);
+ if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) {
+ return (0);
+ }
+ return (1);
+}
+
+STATIC int
+AscIsChipHalted(
+ PortAddr iop_base
+)
+{
+ if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) {
+ if ((AscGetChipControl(iop_base) & CC_HALT) != 0) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+STATIC void
+AscSetChipIH(
+ PortAddr iop_base,
+ ushort ins_code
+)
+{
+ AscSetBank(iop_base, 1);
+ AscWriteChipIH(iop_base, ins_code);
+ AscSetBank(iop_base, 0);
+ return;
+}
+
+STATIC void
+AscAckInterrupt(
+ PortAddr iop_base
+)
+{
+ uchar host_flag;
+ uchar risc_flag;
+ ushort loop;
+
+ loop = 0;
+ do {
+ risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B);
+ if (loop++ > 0x7FFF) {
+ break;
+ }
+ } while ((risc_flag & ASC_RISC_FLAG_GEN_INT) != 0);
+ host_flag = AscReadLramByte(iop_base, ASCV_HOST_FLAG_B) & (~ASC_HOST_FLAG_ACK_INT);
+ AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B,
+ (uchar) (host_flag | ASC_HOST_FLAG_ACK_INT));
+ AscSetChipStatus(iop_base, CIW_INT_ACK);
+ loop = 0;
+ while (AscGetChipStatus(iop_base) & CSW_INT_PENDING) {
+ AscSetChipStatus(iop_base, CIW_INT_ACK);
+ if (loop++ > 3) {
+ break;
+ }
+ }
+ AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
+ return;
+}
+
+STATIC void
+AscDisableInterrupt(
+ PortAddr iop_base
+)
+{
+ ushort cfg;
+
+ cfg = AscGetChipCfgLsw(iop_base);
+ AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON));
+ return;
+}
+
+STATIC void
+AscEnableInterrupt(
+ PortAddr iop_base
+)
+{
+ ushort cfg;
+
+ cfg = AscGetChipCfgLsw(iop_base);
+ AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON);
+ return;
+}
+
+
+
+STATIC void
+AscSetBank(
+ PortAddr iop_base,
+ uchar bank
+)
+{
+ uchar val;
+
+ val = AscGetChipControl(iop_base) &
+ (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG | CC_SCSI_RESET | CC_CHIP_RESET));
+ if (bank == 1) {
+ val |= CC_BANK_ONE;
+ } else if (bank == 2) {
+ val |= CC_DIAG | CC_BANK_ONE;
+ } else {
+ val &= ~CC_BANK_ONE;
+ }
+ AscSetChipControl(iop_base, val);
+ return;
+}
+
+STATIC int
+AscResetChipAndScsiBus(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ PortAddr iop_base;
+ int i = 10;
+
+ iop_base = asc_dvc->iop_base;
+ while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE) && (i-- > 0))
+ {
+ DvcSleepMilliSecond(100);
+ }
+ AscStopChip(iop_base);
+ AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT);
+ DvcDelayNanoSecond(asc_dvc, 60000);
+ AscSetChipIH(iop_base, INS_RFLAG_WTM);
+ AscSetChipIH(iop_base, INS_HALT);
+ AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT);
+ AscSetChipControl(iop_base, CC_HALT);
+ DvcSleepMilliSecond(200);
+ AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT);
+ AscSetChipStatus(iop_base, 0);
+ return (AscIsChipHalted(iop_base));
+}
+
+STATIC ASC_DCNT __init
+AscGetMaxDmaCount(
+ ushort bus_type)
+{
+ if (bus_type & ASC_IS_ISA)
+ return (ASC_MAX_ISA_DMA_COUNT);
+ else if (bus_type & (ASC_IS_EISA | ASC_IS_VL))
+ return (ASC_MAX_VL_DMA_COUNT);
+ return (ASC_MAX_PCI_DMA_COUNT);
+}
+
+#ifdef CONFIG_ISA
+STATIC ushort __init
+AscGetIsaDmaChannel(
+ PortAddr iop_base)
+{
+ ushort channel;
+
+ channel = AscGetChipCfgLsw(iop_base) & 0x0003;
+ if (channel == 0x03)
+ return (0);
+ else if (channel == 0x00)
+ return (7);
+ return (channel + 4);
+}
+
+STATIC ushort __init
+AscSetIsaDmaChannel(
+ PortAddr iop_base,
+ ushort dma_channel)
+{
+ ushort cfg_lsw;
+ uchar value;
+
+ if ((dma_channel >= 5) && (dma_channel <= 7)) {
+ if (dma_channel == 7)
+ value = 0x00;
+ else
+ value = dma_channel - 4;
+ cfg_lsw = AscGetChipCfgLsw(iop_base) & 0xFFFC;
+ cfg_lsw |= value;
+ AscSetChipCfgLsw(iop_base, cfg_lsw);
+ return (AscGetIsaDmaChannel(iop_base));
+ }
+ return (0);
+}
+
+STATIC uchar __init
+AscSetIsaDmaSpeed(
+ PortAddr iop_base,
+ uchar speed_value)
+{
+ speed_value &= 0x07;
+ AscSetBank(iop_base, 1);
+ AscWriteChipDmaSpeed(iop_base, speed_value);
+ AscSetBank(iop_base, 0);
+ return (AscGetIsaDmaSpeed(iop_base));
+}
+
+STATIC uchar __init
+AscGetIsaDmaSpeed(
+ PortAddr iop_base
+)
+{
+ uchar speed_value;
+
+ AscSetBank(iop_base, 1);
+ speed_value = AscReadChipDmaSpeed(iop_base);
+ speed_value &= 0x07;
+ AscSetBank(iop_base, 0);
+ return (speed_value);
+}
+#endif /* CONFIG_ISA */
+
+STATIC ushort __init
+AscReadPCIConfigWord(
+ ASC_DVC_VAR *asc_dvc,
+ ushort pci_config_offset)
+{
+ uchar lsb, msb;
+
+ lsb = DvcReadPCIConfigByte(asc_dvc, pci_config_offset);
+ msb = DvcReadPCIConfigByte(asc_dvc, pci_config_offset + 1);
+ return ((ushort) ((msb << 8) | lsb));
+}
+
+STATIC ushort __init
+AscInitGetConfig(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ ushort warn_code;
+ PortAddr iop_base;
+ ushort PCIDeviceID;
+ ushort PCIVendorID;
+ uchar PCIRevisionID;
+ uchar prevCmdRegBits;
+
+ warn_code = 0;
+ iop_base = asc_dvc->iop_base;
+ asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG;
+ if (asc_dvc->err_code != 0) {
+ return (UW_ERR);
+ }
+ if (asc_dvc->bus_type == ASC_IS_PCI) {
+ PCIVendorID = AscReadPCIConfigWord(asc_dvc,
+ AscPCIConfigVendorIDRegister);
+
+ PCIDeviceID = AscReadPCIConfigWord(asc_dvc,
+ AscPCIConfigDeviceIDRegister);
+
+ PCIRevisionID = DvcReadPCIConfigByte(asc_dvc,
+ AscPCIConfigRevisionIDRegister);
+
+ if (PCIVendorID != ASC_PCI_VENDORID) {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ prevCmdRegBits = DvcReadPCIConfigByte(asc_dvc,
+ AscPCIConfigCommandRegister);
+
+ if ((prevCmdRegBits & AscPCICmdRegBits_IOMemBusMaster) !=
+ AscPCICmdRegBits_IOMemBusMaster) {
+ DvcWritePCIConfigByte(asc_dvc,
+ AscPCIConfigCommandRegister,
+ (prevCmdRegBits |
+ AscPCICmdRegBits_IOMemBusMaster));
+
+ if ((DvcReadPCIConfigByte(asc_dvc,
+ AscPCIConfigCommandRegister)
+ & AscPCICmdRegBits_IOMemBusMaster)
+ != AscPCICmdRegBits_IOMemBusMaster) {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ }
+ if ((PCIDeviceID == ASC_PCI_DEVICEID_1200A) ||
+ (PCIDeviceID == ASC_PCI_DEVICEID_1200B)) {
+ DvcWritePCIConfigByte(asc_dvc,
+ AscPCIConfigLatencyTimer, 0x00);
+ if (DvcReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer)
+ != 0x00) {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ } else if (PCIDeviceID == ASC_PCI_DEVICEID_ULTRA) {
+ if (DvcReadPCIConfigByte(asc_dvc,
+ AscPCIConfigLatencyTimer) < 0x20) {
+ DvcWritePCIConfigByte(asc_dvc,
+ AscPCIConfigLatencyTimer, 0x20);
+
+ if (DvcReadPCIConfigByte(asc_dvc,
+ AscPCIConfigLatencyTimer) < 0x20) {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ }
+ }
+ }
+
+ if (AscFindSignature(iop_base)) {
+ warn_code |= AscInitAscDvcVar(asc_dvc);
+ warn_code |= AscInitFromEEP(asc_dvc);
+ asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG;
+ if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT) {
+ asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT;
+ }
+ } else {
+ asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
+ }
+ return(warn_code);
+}
+
+STATIC ushort __init
+AscInitSetConfig(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ ushort warn_code = 0;
+
+ asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG;
+ if (asc_dvc->err_code != 0)
+ return (UW_ERR);
+ if (AscFindSignature(asc_dvc->iop_base)) {
+ warn_code |= AscInitFromAscDvcVar(asc_dvc);
+ asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG;
+ } else {
+ asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
+ }
+ return (warn_code);
+}
+
+STATIC ushort __init
+AscInitFromAscDvcVar(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ PortAddr iop_base;
+ ushort cfg_msw;
+ ushort warn_code;
+ ushort pci_device_id = 0;
+
+ iop_base = asc_dvc->iop_base;
+#ifdef CONFIG_PCI
+ if (asc_dvc->cfg->dev)
+ pci_device_id = to_pci_dev(asc_dvc->cfg->dev)->device;
+#endif
+ warn_code = 0;
+ cfg_msw = AscGetChipCfgMsw(iop_base);
+ if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) {
+ cfg_msw &= (~(ASC_CFG_MSW_CLR_MASK));
+ warn_code |= ASC_WARN_CFG_MSW_RECOVER;
+ AscSetChipCfgMsw(iop_base, cfg_msw);
+ }
+ if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) !=
+ asc_dvc->cfg->cmd_qng_enabled) {
+ asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled;
+ warn_code |= ASC_WARN_CMD_QNG_CONFLICT;
+ }
+ if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) {
+ warn_code |= ASC_WARN_AUTO_CONFIG;
+ }
+ if ((asc_dvc->bus_type & (ASC_IS_ISA | ASC_IS_VL)) != 0) {
+ if (AscSetChipIRQ(iop_base, asc_dvc->irq_no, asc_dvc->bus_type)
+ != asc_dvc->irq_no) {
+ asc_dvc->err_code |= ASC_IERR_SET_IRQ_NO;
+ }
+ }
+ if (asc_dvc->bus_type & ASC_IS_PCI) {
+ cfg_msw &= 0xFFC0;
+ AscSetChipCfgMsw(iop_base, cfg_msw);
+ if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) {
+ } else {
+ if ((pci_device_id == ASC_PCI_DEVICE_ID_REV_A) ||
+ (pci_device_id == ASC_PCI_DEVICE_ID_REV_B)) {
+ asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB;
+ asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN;
+ }
+ }
+ } else if (asc_dvc->bus_type == ASC_IS_ISAPNP) {
+ if (AscGetChipVersion(iop_base, asc_dvc->bus_type)
+ == ASC_CHIP_VER_ASYN_BUG) {
+ asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN;
+ }
+ }
+ if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) !=
+ asc_dvc->cfg->chip_scsi_id) {
+ asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID;
+ }
+#ifdef CONFIG_ISA
+ if (asc_dvc->bus_type & ASC_IS_ISA) {
+ AscSetIsaDmaChannel(iop_base, asc_dvc->cfg->isa_dma_channel);
+ AscSetIsaDmaSpeed(iop_base, asc_dvc->cfg->isa_dma_speed);
+ }
+#endif /* CONFIG_ISA */
+ return (warn_code);
+}
+
+STATIC ushort
+AscInitAsc1000Driver(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ ushort warn_code;
+ PortAddr iop_base;
+
+ iop_base = asc_dvc->iop_base;
+ warn_code = 0;
+ if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI) &&
+ !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE)) {
+ AscResetChipAndScsiBus(asc_dvc);
+ DvcSleepMilliSecond((ASC_DCNT)
+ ((ushort) asc_dvc->scsi_reset_wait * 1000));
+ }
+ asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC;
+ if (asc_dvc->err_code != 0)
+ return (UW_ERR);
+ if (!AscFindSignature(asc_dvc->iop_base)) {
+ asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
+ return (warn_code);
+ }
+ AscDisableInterrupt(iop_base);
+ warn_code |= AscInitLram(asc_dvc);
+ if (asc_dvc->err_code != 0)
+ return (UW_ERR);
+ ASC_DBG1(1, "AscInitAsc1000Driver: _asc_mcode_chksum 0x%lx\n",
+ (ulong) _asc_mcode_chksum);
+ if (AscLoadMicroCode(iop_base, 0, _asc_mcode_buf,
+ _asc_mcode_size) != _asc_mcode_chksum) {
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
+ return (warn_code);
+ }
+ warn_code |= AscInitMicroCodeVar(asc_dvc);
+ asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC;
+ AscEnableInterrupt(iop_base);
+ return (warn_code);
+}
+
+STATIC ushort __init
+AscInitAscDvcVar(
+ ASC_DVC_VAR *asc_dvc)
+{
+ int i;
+ PortAddr iop_base;
+ ushort warn_code;
+ uchar chip_version;
+
+ iop_base = asc_dvc->iop_base;
+ warn_code = 0;
+ asc_dvc->err_code = 0;
+ if ((asc_dvc->bus_type &
+ (ASC_IS_ISA | ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) {
+ asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE;
+ }
+ AscSetChipControl(iop_base, CC_HALT);
+ AscSetChipStatus(iop_base, 0);
+ asc_dvc->bug_fix_cntl = 0;
+ asc_dvc->pci_fix_asyn_xfer = 0;
+ asc_dvc->pci_fix_asyn_xfer_always = 0;
+ /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ asc_dvc->sdtr_done = 0;
+ asc_dvc->cur_total_qng = 0;
+ asc_dvc->is_in_int = 0;
+ asc_dvc->in_critical_cnt = 0;
+ asc_dvc->last_q_shortage = 0;
+ asc_dvc->use_tagged_qng = 0;
+ asc_dvc->no_scam = 0;
+ asc_dvc->unit_not_ready = 0;
+ asc_dvc->queue_full_or_busy = 0;
+ asc_dvc->redo_scam = 0;
+ asc_dvc->res2 = 0;
+ asc_dvc->host_init_sdtr_index = 0;
+ asc_dvc->cfg->can_tagged_qng = 0;
+ asc_dvc->cfg->cmd_qng_enabled = 0;
+ asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL;
+ asc_dvc->init_sdtr = 0;
+ asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG;
+ asc_dvc->scsi_reset_wait = 3;
+ asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET;
+ asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type);
+ asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET;
+ asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET;
+ asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID;
+ asc_dvc->cfg->lib_serial_no = ASC_LIB_SERIAL_NUMBER;
+ asc_dvc->cfg->lib_version = (ASC_LIB_VERSION_MAJOR << 8) |
+ ASC_LIB_VERSION_MINOR;
+ chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type);
+ asc_dvc->cfg->chip_version = chip_version;
+ asc_dvc->sdtr_period_tbl[0] = SYN_XFER_NS_0;
+ asc_dvc->sdtr_period_tbl[1] = SYN_XFER_NS_1;
+ asc_dvc->sdtr_period_tbl[2] = SYN_XFER_NS_2;
+ asc_dvc->sdtr_period_tbl[3] = SYN_XFER_NS_3;
+ asc_dvc->sdtr_period_tbl[4] = SYN_XFER_NS_4;
+ asc_dvc->sdtr_period_tbl[5] = SYN_XFER_NS_5;
+ asc_dvc->sdtr_period_tbl[6] = SYN_XFER_NS_6;
+ asc_dvc->sdtr_period_tbl[7] = SYN_XFER_NS_7;
+ asc_dvc->max_sdtr_index = 7;
+ if ((asc_dvc->bus_type & ASC_IS_PCI) &&
+ (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150)) {
+ asc_dvc->bus_type = ASC_IS_PCI_ULTRA;
+ asc_dvc->sdtr_period_tbl[0] = SYN_ULTRA_XFER_NS_0;
+ asc_dvc->sdtr_period_tbl[1] = SYN_ULTRA_XFER_NS_1;
+ asc_dvc->sdtr_period_tbl[2] = SYN_ULTRA_XFER_NS_2;
+ asc_dvc->sdtr_period_tbl[3] = SYN_ULTRA_XFER_NS_3;
+ asc_dvc->sdtr_period_tbl[4] = SYN_ULTRA_XFER_NS_4;
+ asc_dvc->sdtr_period_tbl[5] = SYN_ULTRA_XFER_NS_5;
+ asc_dvc->sdtr_period_tbl[6] = SYN_ULTRA_XFER_NS_6;
+ asc_dvc->sdtr_period_tbl[7] = SYN_ULTRA_XFER_NS_7;
+ asc_dvc->sdtr_period_tbl[8] = SYN_ULTRA_XFER_NS_8;
+ asc_dvc->sdtr_period_tbl[9] = SYN_ULTRA_XFER_NS_9;
+ asc_dvc->sdtr_period_tbl[10] = SYN_ULTRA_XFER_NS_10;
+ asc_dvc->sdtr_period_tbl[11] = SYN_ULTRA_XFER_NS_11;
+ asc_dvc->sdtr_period_tbl[12] = SYN_ULTRA_XFER_NS_12;
+ asc_dvc->sdtr_period_tbl[13] = SYN_ULTRA_XFER_NS_13;
+ asc_dvc->sdtr_period_tbl[14] = SYN_ULTRA_XFER_NS_14;
+ asc_dvc->sdtr_period_tbl[15] = SYN_ULTRA_XFER_NS_15;
+ asc_dvc->max_sdtr_index = 15;
+ if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150)
+ {
+ AscSetExtraControl(iop_base,
+ (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE));
+ } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050) {
+ AscSetExtraControl(iop_base,
+ (SEC_ACTIVE_NEGATE | SEC_ENABLE_FILTER));
+ }
+ }
+ if (asc_dvc->bus_type == ASC_IS_PCI) {
+ AscSetExtraControl(iop_base, (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE));
+ }
+
+ asc_dvc->cfg->isa_dma_speed = ASC_DEF_ISA_DMA_SPEED;
+ if (AscGetChipBusType(iop_base) == ASC_IS_ISAPNP) {
+ AscSetChipIFC(iop_base, IFC_INIT_DEFAULT);
+ asc_dvc->bus_type = ASC_IS_ISAPNP;
+ }
+#ifdef CONFIG_ISA
+ if ((asc_dvc->bus_type & ASC_IS_ISA) != 0) {
+ asc_dvc->cfg->isa_dma_channel = (uchar) AscGetIsaDmaChannel(iop_base);
+ }
+#endif /* CONFIG_ISA */
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ asc_dvc->cur_dvc_qng[i] = 0;
+ asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG;
+ asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *) 0L;
+ asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *) 0L;
+ asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG;
+ }
+ return (warn_code);
+}
+
+STATIC ushort __init
+AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
+{
+ ASCEEP_CONFIG eep_config_buf;
+ ASCEEP_CONFIG *eep_config;
+ PortAddr iop_base;
+ ushort chksum;
+ ushort warn_code;
+ ushort cfg_msw, cfg_lsw;
+ int i;
+ int write_eep = 0;
+
+ iop_base = asc_dvc->iop_base;
+ warn_code = 0;
+ AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE);
+ AscStopQueueExe(iop_base);
+ if ((AscStopChip(iop_base) == FALSE) ||
+ (AscGetChipScsiCtrl(iop_base) != 0)) {
+ asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE;
+ AscResetChipAndScsiBus(asc_dvc);
+ DvcSleepMilliSecond((ASC_DCNT)
+ ((ushort) asc_dvc->scsi_reset_wait * 1000));
+ }
+ if (AscIsChipHalted(iop_base) == FALSE) {
+ asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
+ return (warn_code);
+ }
+ AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
+ if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
+ asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
+ return (warn_code);
+ }
+ eep_config = (ASCEEP_CONFIG *) &eep_config_buf;
+ cfg_msw = AscGetChipCfgMsw(iop_base);
+ cfg_lsw = AscGetChipCfgLsw(iop_base);
+ if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) {
+ cfg_msw &= (~(ASC_CFG_MSW_CLR_MASK));
+ warn_code |= ASC_WARN_CFG_MSW_RECOVER;
+ AscSetChipCfgMsw(iop_base, cfg_msw);
+ }
+ chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type);
+ ASC_DBG1(1, "AscInitFromEEP: chksum 0x%x\n", chksum);
+ if (chksum == 0) {
+ chksum = 0xaa55;
+ }
+ if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) {
+ warn_code |= ASC_WARN_AUTO_CONFIG;
+ if (asc_dvc->cfg->chip_version == 3) {
+ if (eep_config->cfg_lsw != cfg_lsw) {
+ warn_code |= ASC_WARN_EEPROM_RECOVER;
+ eep_config->cfg_lsw = AscGetChipCfgLsw(iop_base);
+ }
+ if (eep_config->cfg_msw != cfg_msw) {
+ warn_code |= ASC_WARN_EEPROM_RECOVER;
+ eep_config->cfg_msw = AscGetChipCfgMsw(iop_base);
+ }
+ }
+ }
+ eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK;
+ eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON;
+ ASC_DBG1(1, "AscInitFromEEP: eep_config->chksum 0x%x\n",
+ eep_config->chksum);
+ if (chksum != eep_config->chksum) {
+ if (AscGetChipVersion(iop_base, asc_dvc->bus_type) ==
+ ASC_CHIP_VER_PCI_ULTRA_3050 )
+ {
+ ASC_DBG(1,
+"AscInitFromEEP: chksum error ignored; EEPROM-less board\n");
+ eep_config->init_sdtr = 0xFF;
+ eep_config->disc_enable = 0xFF;
+ eep_config->start_motor = 0xFF;
+ eep_config->use_cmd_qng = 0;
+ eep_config->max_total_qng = 0xF0;
+ eep_config->max_tag_qng = 0x20;
+ eep_config->cntl = 0xBFFF;
+ ASC_EEP_SET_CHIP_ID(eep_config, 7);
+ eep_config->no_scam = 0;
+ eep_config->adapter_info[0] = 0;
+ eep_config->adapter_info[1] = 0;
+ eep_config->adapter_info[2] = 0;
+ eep_config->adapter_info[3] = 0;
+ eep_config->adapter_info[4] = 0;
+ /* Indicate EEPROM-less board. */
+ eep_config->adapter_info[5] = 0xBB;
+ } else {
+ ASC_PRINT(
+"AscInitFromEEP: EEPROM checksum error; Will try to re-write EEPROM.\n");
+ write_eep = 1;
+ warn_code |= ASC_WARN_EEPROM_CHKSUM;
+ }
+ }
+ asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr;
+ asc_dvc->cfg->disc_enable = eep_config->disc_enable;
+ asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng;
+ asc_dvc->cfg->isa_dma_speed = ASC_EEP_GET_DMA_SPD(eep_config);
+ asc_dvc->start_motor = eep_config->start_motor;
+ asc_dvc->dvc_cntl = eep_config->cntl;
+ asc_dvc->no_scam = eep_config->no_scam;
+ asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0];
+ asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1];
+ asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2];
+ asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3];
+ asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4];
+ asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5];
+ if (!AscTestExternalLram(asc_dvc)) {
+ if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA)) {
+ eep_config->max_total_qng = ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG;
+ eep_config->max_tag_qng = ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG;
+ } else {
+ eep_config->cfg_msw |= 0x0800;
+ cfg_msw |= 0x0800;
+ AscSetChipCfgMsw(iop_base, cfg_msw);
+ eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG;
+ eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG;
+ }
+ } else {
+ }
+ if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG) {
+ eep_config->max_total_qng = ASC_MIN_TOTAL_QNG;
+ }
+ if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG) {
+ eep_config->max_total_qng = ASC_MAX_TOTAL_QNG;
+ }
+ if (eep_config->max_tag_qng > eep_config->max_total_qng) {
+ eep_config->max_tag_qng = eep_config->max_total_qng;
+ }
+ if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC) {
+ eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC;
+ }
+ asc_dvc->max_total_qng = eep_config->max_total_qng;
+ if ((eep_config->use_cmd_qng & eep_config->disc_enable) !=
+ eep_config->use_cmd_qng) {
+ eep_config->disc_enable = eep_config->use_cmd_qng;
+ warn_code |= ASC_WARN_CMD_QNG_CONFLICT;
+ }
+ if (asc_dvc->bus_type & (ASC_IS_ISA | ASC_IS_VL | ASC_IS_EISA)) {
+ asc_dvc->irq_no = AscGetChipIRQ(iop_base, asc_dvc->bus_type);
+ }
+ ASC_EEP_SET_CHIP_ID(eep_config, ASC_EEP_GET_CHIP_ID(eep_config) & ASC_MAX_TID);
+ asc_dvc->cfg->chip_scsi_id = ASC_EEP_GET_CHIP_ID(eep_config);
+ if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) &&
+ !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA)) {
+ asc_dvc->host_init_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX;
+ }
+
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i];
+ asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng;
+ asc_dvc->cfg->sdtr_period_offset[i] =
+ (uchar) (ASC_DEF_SDTR_OFFSET |
+ (asc_dvc->host_init_sdtr_index << 4));
+ }
+ eep_config->cfg_msw = AscGetChipCfgMsw(iop_base);
+ if (write_eep) {
+ if ((i = AscSetEEPConfig(iop_base, eep_config, asc_dvc->bus_type)) !=
+ 0) {
+ ASC_PRINT1(
+"AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", i);
+ } else {
+ ASC_PRINT("AscInitFromEEP: Succesfully re-wrote EEPROM.");
+ }
+ }
+ return (warn_code);
+}
+
+STATIC ushort
+AscInitMicroCodeVar(
+ ASC_DVC_VAR *asc_dvc
+)
+{
+ int i;
+ ushort warn_code;
+ PortAddr iop_base;
+ ASC_PADDR phy_addr;
+ ASC_DCNT phy_size;
+
+ iop_base = asc_dvc->iop_base;
+ warn_code = 0;
+ for (i = 0; i <= ASC_MAX_TID; i++) {
+ AscPutMCodeInitSDTRAtID(iop_base, i,
+ asc_dvc->cfg->sdtr_period_offset[i]
+);
+ }
+
+ AscInitQLinkVar(asc_dvc);
+ AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B,
+ asc_dvc->cfg->disc_enable);
+ AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B,
+ ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id));
+
+ /* Align overrun buffer on an 8 byte boundary. */
+ phy_addr = virt_to_bus(asc_dvc->cfg->overrun_buf);
+ phy_addr = cpu_to_le32((phy_addr + 7) & ~0x7);
+ AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D,
+ (uchar *) &phy_addr, 1);
+ phy_size = cpu_to_le32(ASC_OVERRUN_BSIZE - 8);
+ AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_BSIZE_D,
+ (uchar *) &phy_size, 1);
+
+ asc_dvc->cfg->mcode_date =
+ AscReadLramWord(iop_base, (ushort) ASCV_MC_DATE_W);
+ asc_dvc->cfg->mcode_version =
+ AscReadLramWord(iop_base, (ushort) ASCV_MC_VER_W);
+
+ AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
+ if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
+ asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
+ return (warn_code);
+ }
+ if (AscStartChip(iop_base) != 1) {
+ asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
+ return (warn_code);
+ }
+
+ return (warn_code);
+}
+
+STATIC int __init
+AscTestExternalLram(
+ ASC_DVC_VAR *asc_dvc)
+{
+ PortAddr iop_base;
+ ushort q_addr;
+ ushort saved_word;
+ int sta;
+
+ iop_base = asc_dvc->iop_base;
+ sta = 0;
+ q_addr = ASC_QNO_TO_QADDR(241);
+ saved_word = AscReadLramWord(iop_base, q_addr);
+ AscSetChipLramAddr(iop_base, q_addr);
+ AscSetChipLramData(iop_base, 0x55AA);
+ DvcSleepMilliSecond(10);
+ AscSetChipLramAddr(iop_base, q_addr);
+ if (AscGetChipLramData(iop_base) == 0x55AA) {
+ sta = 1;
+ AscWriteLramWord(iop_base, q_addr, saved_word);
+ }
+ return (sta);
+}
+
+STATIC int __init
+AscWriteEEPCmdReg(
+ PortAddr iop_base,
+ uchar cmd_reg
+)
+{
+ uchar read_back;
+ int retry;
+
+ retry = 0;
+ while (TRUE) {
+ AscSetChipEEPCmd(iop_base, cmd_reg);
+ DvcSleepMilliSecond(1);
+ read_back = AscGetChipEEPCmd(iop_base);
+ if (read_back == cmd_reg) {
+ return (1);
+ }
+ if (retry++ > ASC_EEP_MAX_RETRY) {
+ return (0);
+ }
+ }
+}
+
+STATIC int __init
+AscWriteEEPDataReg(
+ PortAddr iop_base,
+ ushort data_reg
+)
+{
+ ushort read_back;
+ int retry;
+
+ retry = 0;
+ while (TRUE) {
+ AscSetChipEEPData(iop_base, data_reg);
+ DvcSleepMilliSecond(1);
+ read_back = AscGetChipEEPData(iop_base);
+ if (read_back == data_reg) {
+ return (1);
+ }
+ if (retry++ > ASC_EEP_MAX_RETRY) {
+ return (0);
+ }
+ }
+}
+
+STATIC void __init
+AscWaitEEPRead(void)
+{
+ DvcSleepMilliSecond(1);
+ return;
+}
+
+STATIC void __init
+AscWaitEEPWrite(void)
+{
+ DvcSleepMilliSecond(20);
+ return;
+}
+
+STATIC ushort __init
+AscReadEEPWord(
+ PortAddr iop_base,
+ uchar addr)
+{
+ ushort read_wval;
+ uchar cmd_reg;
+
+ AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE);
+ AscWaitEEPRead();
+ cmd_reg = addr | ASC_EEP_CMD_READ;
+ AscWriteEEPCmdReg(iop_base, cmd_reg);
+ AscWaitEEPRead();
+ read_wval = AscGetChipEEPData(iop_base);
+ AscWaitEEPRead();
+ return (read_wval);
+}
+
+STATIC ushort __init
+AscWriteEEPWord(
+ PortAddr iop_base,
+ uchar addr,
+ ushort word_val)
+{
+ ushort read_wval;
+
+ read_wval = AscReadEEPWord(iop_base, addr);
+ if (read_wval != word_val) {
+ AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE);
+ AscWaitEEPRead();
+ AscWriteEEPDataReg(iop_base, word_val);
+ AscWaitEEPRead();
+ AscWriteEEPCmdReg(iop_base,
+ (uchar) ((uchar) ASC_EEP_CMD_WRITE | addr));
+ AscWaitEEPWrite();
+ AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE);
+ AscWaitEEPRead();
+ return (AscReadEEPWord(iop_base, addr));
+ }
+ return (read_wval);
+}
+
+STATIC ushort __init
+AscGetEEPConfig(
+ PortAddr iop_base,
+ ASCEEP_CONFIG * cfg_buf, ushort bus_type)
+{
+ ushort wval;
+ ushort sum;
+ ushort *wbuf;
+ int cfg_beg;
+ int cfg_end;
+ int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2;
+ int s_addr;
+
+ wbuf = (ushort *) cfg_buf;
+ sum = 0;
+ /* Read two config words; Byte-swapping done by AscReadEEPWord(). */
+ for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
+ *wbuf = AscReadEEPWord(iop_base, (uchar) s_addr);
+ sum += *wbuf;
+ }
+ if (bus_type & ASC_IS_VL) {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
+ } else {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR;
+ }
+ for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
+ wval = AscReadEEPWord( iop_base, ( uchar )s_addr ) ;
+ if (s_addr <= uchar_end_in_config) {
+ /*
+ * Swap all char fields - must unswap bytes already swapped
+ * by AscReadEEPWord().
+ */
+ *wbuf = le16_to_cpu(wval);
+ } else {
+ /* Don't swap word field at the end - cntl field. */
+ *wbuf = wval;
+ }
+ sum += wval; /* Checksum treats all EEPROM data as words. */
+ }
+ /*
+ * Read the checksum word which will be compared against 'sum'
+ * by the caller. Word field already swapped.
+ */
+ *wbuf = AscReadEEPWord(iop_base, (uchar) s_addr);
+ return (sum);
+}
+
+STATIC int __init
+AscSetEEPConfigOnce(
+ PortAddr iop_base,
+ ASCEEP_CONFIG * cfg_buf, ushort bus_type)
+{
+ int n_error;
+ ushort *wbuf;
+ ushort word;
+ ushort sum;
+ int s_addr;
+ int cfg_beg;
+ int cfg_end;
+ int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2;
+
+
+ wbuf = (ushort *) cfg_buf;
+ n_error = 0;
+ sum = 0;
+ /* Write two config words; AscWriteEEPWord() will swap bytes. */
+ for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
+ sum += *wbuf;
+ if (*wbuf != AscWriteEEPWord(iop_base, (uchar) s_addr, *wbuf)) {
+ n_error++;
+ }
+ }
+ if (bus_type & ASC_IS_VL) {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
+ } else {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR;
+ }
+ for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
+ if (s_addr <= uchar_end_in_config) {
+ /*
+ * This is a char field. Swap char fields before they are
+ * swapped again by AscWriteEEPWord().
+ */
+ word = cpu_to_le16(*wbuf);
+ if (word != AscWriteEEPWord( iop_base, (uchar) s_addr, word)) {
+ n_error++;
+ }
+ } else {
+ /* Don't swap word field at the end - cntl field. */
+ if (*wbuf != AscWriteEEPWord(iop_base, (uchar) s_addr, *wbuf)) {
+ n_error++;
+ }
+ }
+ sum += *wbuf; /* Checksum calculated from word values. */
+ }
+ /* Write checksum word. It will be swapped by AscWriteEEPWord(). */
+ *wbuf = sum;
+ if (sum != AscWriteEEPWord(iop_base, (uchar) s_addr, sum)) {
+ n_error++;
+ }
+
+ /* Read EEPROM back again. */
+ wbuf = (ushort *) cfg_buf;
+ /*
+ * Read two config words; Byte-swapping done by AscReadEEPWord().
+ */
+ for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
+ if (*wbuf != AscReadEEPWord(iop_base, (uchar) s_addr)) {
+ n_error++;
+ }
+ }
+ if (bus_type & ASC_IS_VL) {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG_VL;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR_VL;
+ } else {
+ cfg_beg = ASC_EEP_DVC_CFG_BEG;
+ cfg_end = ASC_EEP_MAX_DVC_ADDR;
+ }
+ for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
+ if (s_addr <= uchar_end_in_config) {
+ /*
+ * Swap all char fields. Must unswap bytes already swapped
+ * by AscReadEEPWord().
+ */
+ word = le16_to_cpu(AscReadEEPWord(iop_base, (uchar) s_addr));
+ } else {
+ /* Don't swap word field at the end - cntl field. */
+ word = AscReadEEPWord(iop_base, (uchar) s_addr);
+ }
+ if (*wbuf != word) {
+ n_error++;
+ }
+ }
+ /* Read checksum; Byte swapping not needed. */
+ if (AscReadEEPWord(iop_base, (uchar) s_addr) != sum) {
+ n_error++;
+ }
+ return (n_error);
+}
+
+STATIC int __init
+AscSetEEPConfig(
+ PortAddr iop_base,
+ ASCEEP_CONFIG * cfg_buf, ushort bus_type
+)
+{
+ int retry;
+ int n_error;
+
+ retry = 0;
+ while (TRUE) {
+ if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf,
+ bus_type)) == 0) {
+ break;
+ }
+ if (++retry > ASC_EEP_MAX_RETRY) {
+ break;
+ }
+ }
+ return (n_error);
+}
+
+STATIC void
+AscAsyncFix(
+ ASC_DVC_VAR *asc_dvc,
+ uchar tid_no,
+ ASC_SCSI_INQUIRY *inq)
+{
+ uchar dvc_type;
+ ASC_SCSI_BIT_ID_TYPE tid_bits;
+
+ dvc_type = ASC_INQ_DVC_TYPE(inq);
+ tid_bits = ASC_TIX_TO_TARGET_ID(tid_no);
+
+ if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN)
+ {
+ if (!(asc_dvc->init_sdtr & tid_bits))
+ {
+ if ((dvc_type == TYPE_ROM) &&
+ (AscCompareString((uchar *) inq->vendor_id,
+ (uchar *) "HP ", 3) == 0))
+ {
+ asc_dvc->pci_fix_asyn_xfer_always |= tid_bits;
+ }
+ asc_dvc->pci_fix_asyn_xfer |= tid_bits;
+ if ((dvc_type == TYPE_PROCESSOR) ||
+ (dvc_type == TYPE_SCANNER) ||
+ (dvc_type == TYPE_ROM) ||
+ (dvc_type == TYPE_TAPE))
+ {
+ asc_dvc->pci_fix_asyn_xfer &= ~tid_bits;
+ }
+
+ if (asc_dvc->pci_fix_asyn_xfer & tid_bits)
+ {
+ AscSetRunChipSynRegAtID(asc_dvc->iop_base, tid_no,
+ ASYN_SDTR_DATA_FIX_PCI_REV_AB);
+ }
+ }
+ }
+ return;
+}
+
+STATIC int
+AscTagQueuingSafe(ASC_SCSI_INQUIRY *inq)
+{
+ if ((inq->add_len >= 32) &&
+ (AscCompareString((uchar *) inq->vendor_id,
+ (uchar *) "QUANTUM XP34301", 15) == 0) &&
+ (AscCompareString((uchar *) inq->product_rev_level,
+ (uchar *) "1071", 4) == 0))
+ {
+ return 0;
+ }
+ return 1;
+}
+
+STATIC void
+AscInquiryHandling(ASC_DVC_VAR *asc_dvc,
+ uchar tid_no, ASC_SCSI_INQUIRY *inq)
+{
+ ASC_SCSI_BIT_ID_TYPE tid_bit = ASC_TIX_TO_TARGET_ID(tid_no);
+ ASC_SCSI_BIT_ID_TYPE orig_init_sdtr, orig_use_tagged_qng;
+
+ orig_init_sdtr = asc_dvc->init_sdtr;
+ orig_use_tagged_qng = asc_dvc->use_tagged_qng;
+
+ asc_dvc->init_sdtr &= ~tid_bit;
+ asc_dvc->cfg->can_tagged_qng &= ~tid_bit;
+ asc_dvc->use_tagged_qng &= ~tid_bit;
+
+ if (ASC_INQ_RESPONSE_FMT(inq) >= 2 || ASC_INQ_ANSI_VER(inq) >= 2) {
+ if ((asc_dvc->cfg->sdtr_enable & tid_bit) && ASC_INQ_SYNC(inq)) {
+ asc_dvc->init_sdtr |= tid_bit;
+ }
+ if ((asc_dvc->cfg->cmd_qng_enabled & tid_bit) &&
+ ASC_INQ_CMD_QUEUE(inq)) {
+ if (AscTagQueuingSafe(inq)) {
+ asc_dvc->use_tagged_qng |= tid_bit;
+ asc_dvc->cfg->can_tagged_qng |= tid_bit;
+ }
+ }
+ }
+ if (orig_use_tagged_qng != asc_dvc->use_tagged_qng) {
+ AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B,
+ asc_dvc->cfg->disc_enable);
+ AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B,
+ asc_dvc->use_tagged_qng);
+ AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B,
+ asc_dvc->cfg->can_tagged_qng);
+
+ asc_dvc->max_dvc_qng[tid_no] =
+ asc_dvc->cfg->max_tag_qng[tid_no];
+ AscWriteLramByte(asc_dvc->iop_base,
+ (ushort) (ASCV_MAX_DVC_QNG_BEG + tid_no),
+ asc_dvc->max_dvc_qng[tid_no]);
+ }
+ if (orig_init_sdtr != asc_dvc->init_sdtr) {
+ AscAsyncFix(asc_dvc, tid_no, inq);
+ }
+ return;
+}
+
+STATIC int
+AscCompareString(
+ uchar *str1,
+ uchar *str2,
+ int len
+)
+{
+ int i;
+ int diff;
+
+ for (i = 0; i < len; i++) {
+ diff = (int) (str1[i] - str2[i]);
+ if (diff != 0)
+ return (diff);
+ }
+ return (0);
+}
+
+STATIC uchar
+AscReadLramByte(
+ PortAddr iop_base,
+ ushort addr
+)
+{
+ uchar byte_data;
+ ushort word_data;
+
+ if (isodd_word(addr)) {
+ AscSetChipLramAddr(iop_base, addr - 1);
+ word_data = AscGetChipLramData(iop_base);
+ byte_data = (uchar) ((word_data >> 8) & 0xFF);
+ } else {
+ AscSetChipLramAddr(iop_base, addr);
+ word_data = AscGetChipLramData(iop_base);
+ byte_data = (uchar) (word_data & 0xFF);
+ }
+ return (byte_data);
+}
+STATIC ushort
+AscReadLramWord(
+ PortAddr iop_base,
+ ushort addr
+)
+{
+ ushort word_data;
+
+ AscSetChipLramAddr(iop_base, addr);
+ word_data = AscGetChipLramData(iop_base);
+ return (word_data);
+}
+
+#if CC_VERY_LONG_SG_LIST
+STATIC ASC_DCNT
+AscReadLramDWord(
+ PortAddr iop_base,
+ ushort addr
+)
+{
+ ushort val_low, val_high;
+ ASC_DCNT dword_data;
+
+ AscSetChipLramAddr(iop_base, addr);
+ val_low = AscGetChipLramData(iop_base);
+ val_high = AscGetChipLramData(iop_base);
+ dword_data = ((ASC_DCNT) val_high << 16) | (ASC_DCNT) val_low;
+ return (dword_data);
+}
+#endif /* CC_VERY_LONG_SG_LIST */
+
+STATIC void
+AscWriteLramWord(
+ PortAddr iop_base,
+ ushort addr,
+ ushort word_val
+)
+{
+ AscSetChipLramAddr(iop_base, addr);
+ AscSetChipLramData(iop_base, word_val);
+ return;
+}
+
+STATIC void
+AscWriteLramByte(
+ PortAddr iop_base,
+ ushort addr,
+ uchar byte_val
+)
+{
+ ushort word_data;
+
+ if (isodd_word(addr)) {
+ addr--;
+ word_data = AscReadLramWord(iop_base, addr);
+ word_data &= 0x00FF;
+ word_data |= (((ushort) byte_val << 8) & 0xFF00);
+ } else {
+ word_data = AscReadLramWord(iop_base, addr);
+ word_data &= 0xFF00;
+ word_data |= ((ushort) byte_val & 0x00FF);
+ }
+ AscWriteLramWord(iop_base, addr, word_data);
+ return;
+}
+
+/*
+ * Copy 2 bytes to LRAM.
+ *
+ * The source data is assumed to be in little-endian order in memory
+ * and is maintained in little-endian order when written to LRAM.
+ */
+STATIC void
+AscMemWordCopyPtrToLram(
+ PortAddr iop_base,
+ ushort s_addr,
+ uchar *s_buffer,
+ int words
+)
+{
+ int i;
+
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < 2 * words; i += 2) {
+ /*
+ * On a little-endian system the second argument below
+ * produces a little-endian ushort which is written to
+ * LRAM in little-endian order. On a big-endian system
+ * the second argument produces a big-endian ushort which
+ * is "transparently" byte-swapped by outpw() and written
+ * in little-endian order to LRAM.
+ */
+ outpw(iop_base + IOP_RAM_DATA,
+ ((ushort) s_buffer[i + 1] << 8) | s_buffer[i]);
+ }
+ return;
+}
+
+/*
+ * Copy 4 bytes to LRAM.
+ *
+ * The source data is assumed to be in little-endian order in memory
+ * and is maintained in little-endian order when writen to LRAM.
+ */
+STATIC void
+AscMemDWordCopyPtrToLram(
+ PortAddr iop_base,
+ ushort s_addr,
+ uchar *s_buffer,
+ int dwords
+)
+{
+ int i;
+
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < 4 * dwords; i += 4) {
+ outpw(iop_base + IOP_RAM_DATA,
+ ((ushort) s_buffer[i + 1] << 8) | s_buffer[i]); /* LSW */
+ outpw(iop_base + IOP_RAM_DATA,
+ ((ushort) s_buffer[i + 3] << 8) | s_buffer[i + 2]); /* MSW */
+ }
+ return;
+}
+
+/*
+ * Copy 2 bytes from LRAM.
+ *
+ * The source data is assumed to be in little-endian order in LRAM
+ * and is maintained in little-endian order when written to memory.
+ */
+STATIC void
+AscMemWordCopyPtrFromLram(
+ PortAddr iop_base,
+ ushort s_addr,
+ uchar *d_buffer,
+ int words
+)
+{
+ int i;
+ ushort word;
+
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < 2 * words; i += 2) {
+ word = inpw(iop_base + IOP_RAM_DATA);
+ d_buffer[i] = word & 0xff;
+ d_buffer[i + 1] = (word >> 8) & 0xff;
+ }
+ return;
+}
+
+STATIC ASC_DCNT
+AscMemSumLramWord(
+ PortAddr iop_base,
+ ushort s_addr,
+ int words
+)
+{
+ ASC_DCNT sum;
+ int i;
+
+ sum = 0L;
+ for (i = 0; i < words; i++, s_addr += 2) {
+ sum += AscReadLramWord(iop_base, s_addr);
+ }
+ return (sum);
+}
+
+STATIC void
+AscMemWordSetLram(
+ PortAddr iop_base,
+ ushort s_addr,
+ ushort set_wval,
+ int words
+)
+{
+ int i;
+
+ AscSetChipLramAddr(iop_base, s_addr);
+ for (i = 0; i < words; i++) {
+ AscSetChipLramData(iop_base, set_wval);
+ }
+ return;
+}
+
+
+/*
+ * --- Adv Library Functions
+ */
+
+/* a_mcode.h */
+
+/* Microcode buffer is kept after initialization for error recovery. */
+STATIC unsigned char _adv_asc3550_buf[] = {
+ 0x00, 0x00, 0x00, 0xf2, 0x00, 0xf0, 0x00, 0x16, 0x18, 0xe4, 0x00, 0xfc, 0x01, 0x00, 0x48, 0xe4,
+ 0xbe, 0x18, 0x18, 0x80, 0x03, 0xf6, 0x02, 0x00, 0x00, 0xfa, 0xff, 0xff, 0x28, 0x0e, 0x9e, 0xe7,
+ 0xff, 0x00, 0x82, 0xe7, 0x00, 0xea, 0x00, 0xf6, 0x01, 0xe6, 0x09, 0xe7, 0x55, 0xf0, 0x01, 0xf6,
+ 0x01, 0xfa, 0x08, 0x00, 0x03, 0x00, 0x04, 0x00, 0x18, 0xf4, 0x10, 0x00, 0x00, 0xec, 0x85, 0xf0,
+ 0xbc, 0x00, 0xd5, 0xf0, 0x8e, 0x0c, 0x38, 0x54, 0x00, 0xe6, 0x1e, 0xf0, 0x86, 0xf0, 0xb4, 0x00,
+ 0x98, 0x57, 0xd0, 0x01, 0x0c, 0x1c, 0x3e, 0x1c, 0x0c, 0x00, 0xbb, 0x00, 0xaa, 0x18, 0x02, 0x80,
+ 0x32, 0xf0, 0x01, 0xfc, 0x88, 0x0c, 0xc6, 0x12, 0x02, 0x13, 0x18, 0x40, 0x00, 0x57, 0x01, 0xea,
+ 0x3c, 0x00, 0x6c, 0x01, 0x6e, 0x01, 0x04, 0x12, 0x3e, 0x57, 0x00, 0x80, 0x03, 0xe6, 0xb6, 0x00,
+ 0xc0, 0x00, 0x01, 0x01, 0x3e, 0x01, 0xda, 0x0f, 0x22, 0x10, 0x08, 0x12, 0x02, 0x4a, 0xb9, 0x54,
+ 0x03, 0x58, 0x1b, 0x80, 0x30, 0xe4, 0x4b, 0xe4, 0x20, 0x00, 0x32, 0x00, 0x3e, 0x00, 0x80, 0x00,
+ 0x24, 0x01, 0x3c, 0x01, 0x68, 0x01, 0x6a, 0x01, 0x70, 0x01, 0x72, 0x01, 0x74, 0x01, 0x76, 0x01,
+ 0x78, 0x01, 0x62, 0x0a, 0x92, 0x0c, 0x2c, 0x10, 0x2e, 0x10, 0x06, 0x13, 0x4c, 0x1c, 0xbb, 0x55,
+ 0x3c, 0x56, 0x04, 0x80, 0x4a, 0xe4, 0x02, 0xee, 0x5b, 0xf0, 0xb1, 0xf0, 0x03, 0xf7, 0x06, 0xf7,
+ 0x03, 0xfc, 0x0f, 0x00, 0x40, 0x00, 0xbe, 0x00, 0x00, 0x01, 0xb0, 0x08, 0x30, 0x13, 0x64, 0x15,
+ 0x32, 0x1c, 0x38, 0x1c, 0x4e, 0x1c, 0x10, 0x44, 0x02, 0x48, 0x00, 0x4c, 0x04, 0xea, 0x5d, 0xf0,
+ 0x04, 0xf6, 0x02, 0xfc, 0x05, 0x00, 0x34, 0x00, 0x36, 0x00, 0x98, 0x00, 0xcc, 0x00, 0x20, 0x01,
+ 0x4e, 0x01, 0x4e, 0x0b, 0x1e, 0x0e, 0x0c, 0x10, 0x0a, 0x12, 0x04, 0x13, 0x40, 0x13, 0x30, 0x1c,
+ 0x00, 0x4e, 0xbd, 0x56, 0x06, 0x83, 0x00, 0xdc, 0x05, 0xf0, 0x09, 0xf0, 0x59, 0xf0, 0xa7, 0xf0,
+ 0xb8, 0xf0, 0x0e, 0xf7, 0x06, 0x00, 0x19, 0x00, 0x33, 0x00, 0x9b, 0x00, 0xa4, 0x00, 0xb5, 0x00,
+ 0xba, 0x00, 0xd0, 0x00, 0xe1, 0x00, 0xe7, 0x00, 0xde, 0x03, 0x56, 0x0a, 0x14, 0x0e, 0x02, 0x10,
+ 0x04, 0x10, 0x0a, 0x10, 0x36, 0x10, 0x0a, 0x13, 0x12, 0x13, 0x52, 0x13, 0x10, 0x15, 0x14, 0x15,
+ 0xac, 0x16, 0x20, 0x1c, 0x34, 0x1c, 0x36, 0x1c, 0x08, 0x44, 0x38, 0x44, 0x91, 0x44, 0x0a, 0x45,
+ 0x48, 0x46, 0x01, 0x48, 0x68, 0x54, 0x83, 0x55, 0xb0, 0x57, 0x01, 0x58, 0x83, 0x59, 0x05, 0xe6,
+ 0x0b, 0xf0, 0x0c, 0xf0, 0x5c, 0xf0, 0x4b, 0xf4, 0x04, 0xf8, 0x05, 0xf8, 0x02, 0xfa, 0x03, 0xfa,
+ 0x04, 0xfc, 0x05, 0xfc, 0x07, 0x00, 0x0a, 0x00, 0x0d, 0x00, 0x1c, 0x00, 0x9e, 0x00, 0xa8, 0x00,
+ 0xaa, 0x00, 0xb9, 0x00, 0xe0, 0x00, 0x22, 0x01, 0x26, 0x01, 0x79, 0x01, 0x7a, 0x01, 0xc0, 0x01,
+ 0xc2, 0x01, 0x7c, 0x02, 0x5a, 0x03, 0xea, 0x04, 0xe8, 0x07, 0x68, 0x08, 0x69, 0x08, 0xba, 0x08,
+ 0xe9, 0x09, 0x06, 0x0b, 0x3a, 0x0e, 0x00, 0x10, 0x1a, 0x10, 0xed, 0x10, 0xf1, 0x10, 0x06, 0x12,
+ 0x0c, 0x13, 0x16, 0x13, 0x1e, 0x13, 0x82, 0x13, 0x42, 0x14, 0xd6, 0x14, 0x8a, 0x15, 0xc6, 0x17,
+ 0xd2, 0x17, 0x6b, 0x18, 0x12, 0x1c, 0x46, 0x1c, 0x9c, 0x32, 0x00, 0x40, 0x0e, 0x47, 0x48, 0x47,
+ 0x41, 0x48, 0x89, 0x48, 0x80, 0x4c, 0x00, 0x54, 0x44, 0x55, 0xe5, 0x55, 0x14, 0x56, 0x77, 0x57,
+ 0xbf, 0x57, 0x40, 0x5c, 0x06, 0x80, 0x08, 0x90, 0x03, 0xa1, 0xfe, 0x9c, 0xf0, 0x29, 0x02, 0xfe,
+ 0xb8, 0x0c, 0xff, 0x10, 0x00, 0x00, 0xd0, 0xfe, 0xcc, 0x18, 0x00, 0xcf, 0xfe, 0x80, 0x01, 0xff,
+ 0x03, 0x00, 0x00, 0xfe, 0x93, 0x15, 0xfe, 0x0f, 0x05, 0xff, 0x38, 0x00, 0x00, 0xfe, 0x57, 0x24,
+ 0x00, 0xfe, 0x48, 0x00, 0x4f, 0xff, 0x04, 0x00, 0x00, 0x10, 0xff, 0x09, 0x00, 0x00, 0xff, 0x08,
+ 0x01, 0x01, 0xff, 0x08, 0xff, 0xff, 0xff, 0x27, 0x00, 0x00, 0xff, 0x10, 0xff, 0xff, 0xff, 0x0f,
+ 0x00, 0x00, 0xfe, 0x78, 0x56, 0xfe, 0x34, 0x12, 0xff, 0x21, 0x00, 0x00, 0xfe, 0x04, 0xf7, 0xcf,
+ 0x2a, 0x67, 0x0b, 0x01, 0xfe, 0xce, 0x0e, 0xfe, 0x04, 0xf7, 0xcf, 0x67, 0x0b, 0x3c, 0x2a, 0xfe,
+ 0x3d, 0xf0, 0xfe, 0x02, 0x02, 0xfe, 0x20, 0xf0, 0x9c, 0xfe, 0x91, 0xf0, 0xfe, 0xf0, 0x01, 0xfe,
+ 0x90, 0xf0, 0xfe, 0xf0, 0x01, 0xfe, 0x8f, 0xf0, 0x9c, 0x05, 0x51, 0x3b, 0x02, 0xfe, 0xd4, 0x0c,
+ 0x01, 0xfe, 0x44, 0x0d, 0xfe, 0xdd, 0x12, 0xfe, 0xfc, 0x10, 0xfe, 0x28, 0x1c, 0x05, 0xfe, 0xa6,
+ 0x00, 0xfe, 0xd3, 0x12, 0x47, 0x18, 0xfe, 0xa6, 0x00, 0xb5, 0xfe, 0x48, 0xf0, 0xfe, 0x86, 0x02,
+ 0xfe, 0x49, 0xf0, 0xfe, 0xa0, 0x02, 0xfe, 0x4a, 0xf0, 0xfe, 0xbe, 0x02, 0xfe, 0x46, 0xf0, 0xfe,
+ 0x50, 0x02, 0xfe, 0x47, 0xf0, 0xfe, 0x56, 0x02, 0xfe, 0x43, 0xf0, 0xfe, 0x44, 0x02, 0xfe, 0x44,
+ 0xf0, 0xfe, 0x48, 0x02, 0xfe, 0x45, 0xf0, 0xfe, 0x4c, 0x02, 0x17, 0x0b, 0xa0, 0x17, 0x06, 0x18,
+ 0x96, 0x02, 0x29, 0xfe, 0x00, 0x1c, 0xde, 0xfe, 0x02, 0x1c, 0xdd, 0xfe, 0x1e, 0x1c, 0xfe, 0xe9,
+ 0x10, 0x01, 0xfe, 0x20, 0x17, 0xfe, 0xe7, 0x10, 0xfe, 0x06, 0xfc, 0xc7, 0x0a, 0x6b, 0x01, 0x9e,
+ 0x02, 0x29, 0x14, 0x4d, 0x37, 0x97, 0x01, 0xfe, 0x64, 0x0f, 0x0a, 0x6b, 0x01, 0x82, 0xfe, 0xbd,
+ 0x10, 0x0a, 0x6b, 0x01, 0x82, 0xfe, 0xad, 0x10, 0xfe, 0x16, 0x1c, 0xfe, 0x58, 0x1c, 0x17, 0x06,
+ 0x18, 0x96, 0x2a, 0x25, 0x29, 0xfe, 0x3d, 0xf0, 0xfe, 0x02, 0x02, 0x21, 0xfe, 0x94, 0x02, 0xfe,
+ 0x5a, 0x1c, 0xea, 0xfe, 0x14, 0x1c, 0x14, 0xfe, 0x30, 0x00, 0x37, 0x97, 0x01, 0xfe, 0x54, 0x0f,
+ 0x17, 0x06, 0x18, 0x96, 0x02, 0xd0, 0x1e, 0x20, 0x07, 0x10, 0x34, 0xfe, 0x69, 0x10, 0x17, 0x06,
+ 0x18, 0x96, 0xfe, 0x04, 0xec, 0x20, 0x46, 0x3d, 0x12, 0x20, 0xfe, 0x05, 0xf6, 0xc7, 0x01, 0xfe,
+ 0x52, 0x16, 0x09, 0x4a, 0x4c, 0x35, 0x11, 0x2d, 0x3c, 0x8a, 0x01, 0xe6, 0x02, 0x29, 0x0a, 0x40,
+ 0x01, 0x0e, 0x07, 0x00, 0x5d, 0x01, 0x6f, 0xfe, 0x18, 0x10, 0xfe, 0x41, 0x58, 0x0a, 0x99, 0x01,
+ 0x0e, 0xfe, 0xc8, 0x54, 0x64, 0xfe, 0x0c, 0x03, 0x01, 0xe6, 0x02, 0x29, 0x2a, 0x46, 0xfe, 0x02,
+ 0xe8, 0x27, 0xf8, 0xfe, 0x9e, 0x43, 0xf7, 0xfe, 0x27, 0xf0, 0xfe, 0xdc, 0x01, 0xfe, 0x07, 0x4b,
+ 0xfe, 0x20, 0xf0, 0x9c, 0xfe, 0x40, 0x1c, 0x25, 0xd2, 0xfe, 0x26, 0xf0, 0xfe, 0x56, 0x03, 0xfe,
+ 0xa0, 0xf0, 0xfe, 0x44, 0x03, 0xfe, 0x11, 0xf0, 0x9c, 0xfe, 0xef, 0x10, 0xfe, 0x9f, 0xf0, 0xfe,
+ 0x64, 0x03, 0xeb, 0x0f, 0xfe, 0x11, 0x00, 0x02, 0x5a, 0x2a, 0xfe, 0x48, 0x1c, 0xeb, 0x09, 0x04,
+ 0x1d, 0xfe, 0x18, 0x13, 0x23, 0x1e, 0x98, 0xac, 0x12, 0x98, 0x0a, 0x40, 0x01, 0x0e, 0xac, 0x75,
+ 0x01, 0xfe, 0xbc, 0x15, 0x11, 0xca, 0x25, 0xd2, 0xfe, 0x01, 0xf0, 0xd2, 0xfe, 0x82, 0xf0, 0xfe,
+ 0x92, 0x03, 0xec, 0x11, 0xfe, 0xe4, 0x00, 0x65, 0xfe, 0xa4, 0x03, 0x25, 0x32, 0x1f, 0xfe, 0xb4,
+ 0x03, 0x01, 0x43, 0xfe, 0x06, 0xf0, 0xfe, 0xc4, 0x03, 0x8d, 0x81, 0xfe, 0x0a, 0xf0, 0xfe, 0x7a,
+ 0x06, 0x02, 0x22, 0x05, 0x6b, 0x28, 0x16, 0xfe, 0xf6, 0x04, 0x14, 0x2c, 0x01, 0x33, 0x8f, 0xfe,
+ 0x66, 0x02, 0x02, 0xd1, 0xeb, 0x2a, 0x67, 0x1a, 0xfe, 0x67, 0x1b, 0xf8, 0xf7, 0xfe, 0x48, 0x1c,
+ 0x70, 0x01, 0x6e, 0x87, 0x0a, 0x40, 0x01, 0x0e, 0x07, 0x00, 0x16, 0xd3, 0x0a, 0xca, 0x01, 0x0e,
+ 0x74, 0x60, 0x59, 0x76, 0x27, 0x05, 0x6b, 0x28, 0xfe, 0x10, 0x12, 0x14, 0x2c, 0x01, 0x33, 0x8f,
+ 0xfe, 0x66, 0x02, 0x02, 0xd1, 0xbc, 0x7d, 0xbd, 0x7f, 0x25, 0x22, 0x65, 0xfe, 0x3c, 0x04, 0x1f,
+ 0xfe, 0x38, 0x04, 0x68, 0xfe, 0xa0, 0x00, 0xfe, 0x9b, 0x57, 0xfe, 0x4e, 0x12, 0x2b, 0xff, 0x02,
+ 0x00, 0x10, 0x01, 0x08, 0x1f, 0xfe, 0xe0, 0x04, 0x2b, 0x01, 0x08, 0x1f, 0x22, 0x30, 0x2e, 0xd5,
+ 0xfe, 0x4c, 0x44, 0xfe, 0x4c, 0x12, 0x60, 0xfe, 0x44, 0x48, 0x13, 0x2c, 0xfe, 0x4c, 0x54, 0x64,
+ 0xd3, 0x46, 0x76, 0x27, 0xfa, 0xef, 0xfe, 0x62, 0x13, 0x09, 0x04, 0x1d, 0xfe, 0x2a, 0x13, 0x2f,
+ 0x07, 0x7e, 0xa5, 0xfe, 0x20, 0x10, 0x13, 0x2c, 0xfe, 0x4c, 0x54, 0x64, 0xd3, 0xfa, 0xef, 0x86,
+ 0x09, 0x04, 0x1d, 0xfe, 0x08, 0x13, 0x2f, 0x07, 0x7e, 0x6e, 0x09, 0x04, 0x1d, 0xfe, 0x1c, 0x12,
+ 0x14, 0x92, 0x09, 0x04, 0x06, 0x3b, 0x14, 0xc4, 0x01, 0x33, 0x8f, 0xfe, 0x70, 0x0c, 0x02, 0x22,
+ 0x2b, 0x11, 0xfe, 0xe6, 0x00, 0xfe, 0x1c, 0x90, 0xf9, 0x03, 0x14, 0x92, 0x01, 0x33, 0x02, 0x29,
+ 0xfe, 0x42, 0x5b, 0x67, 0x1a, 0xfe, 0x46, 0x59, 0xf8, 0xf7, 0xfe, 0x87, 0x80, 0xfe, 0x31, 0xe4,
+ 0x4f, 0x09, 0x04, 0x0b, 0xfe, 0x78, 0x13, 0xfe, 0x20, 0x80, 0x07, 0x1a, 0xfe, 0x70, 0x12, 0x49,
+ 0x04, 0x06, 0xfe, 0x60, 0x13, 0x05, 0xfe, 0xa2, 0x00, 0x28, 0x16, 0xfe, 0x80, 0x05, 0xfe, 0x31,
+ 0xe4, 0x6a, 0x49, 0x04, 0x0b, 0xfe, 0x4a, 0x13, 0x05, 0xfe, 0xa0, 0x00, 0x28, 0xfe, 0x42, 0x12,
+ 0x5e, 0x01, 0x08, 0x25, 0x32, 0xf1, 0x01, 0x08, 0x26, 0xfe, 0x98, 0x05, 0x11, 0xfe, 0xe3, 0x00,
+ 0x23, 0x49, 0xfe, 0x4a, 0xf0, 0xfe, 0x6a, 0x05, 0xfe, 0x49, 0xf0, 0xfe, 0x64, 0x05, 0x83, 0x24,
+ 0xfe, 0x21, 0x00, 0xa1, 0x24, 0xfe, 0x22, 0x00, 0xa0, 0x24, 0x4c, 0xfe, 0x09, 0x48, 0x01, 0x08,
+ 0x26, 0xfe, 0x98, 0x05, 0xfe, 0xe2, 0x08, 0x49, 0x04, 0xc5, 0x3b, 0x01, 0x86, 0x24, 0x06, 0x12,
+ 0xcc, 0x37, 0xfe, 0x27, 0x01, 0x09, 0x04, 0x1d, 0xfe, 0x22, 0x12, 0x47, 0x01, 0xa7, 0x14, 0x92,
+ 0x09, 0x04, 0x06, 0x3b, 0x14, 0xc4, 0x01, 0x33, 0x8f, 0xfe, 0x70, 0x0c, 0x02, 0x22, 0x05, 0xfe,
+ 0x9c, 0x00, 0x28, 0xfe, 0x3e, 0x12, 0x05, 0x50, 0x28, 0xfe, 0x36, 0x13, 0x47, 0x01, 0xa7, 0x26,
+ 0xfe, 0x08, 0x06, 0x0a, 0x06, 0x49, 0x04, 0x19, 0xfe, 0x02, 0x12, 0x5f, 0x01, 0xfe, 0xaa, 0x14,
+ 0x1f, 0xfe, 0xfe, 0x05, 0x11, 0x9a, 0x01, 0x43, 0x11, 0xfe, 0xe5, 0x00, 0x05, 0x50, 0xb4, 0x0c,
+ 0x50, 0x05, 0xc6, 0x28, 0xfe, 0x62, 0x12, 0x05, 0x3f, 0x28, 0xfe, 0x5a, 0x13, 0x01, 0xfe, 0x14,
+ 0x18, 0x01, 0xfe, 0x66, 0x18, 0xfe, 0x43, 0x48, 0xb7, 0x19, 0x13, 0x6c, 0xff, 0x02, 0x00, 0x57,
+ 0x48, 0x8b, 0x1c, 0x3d, 0x85, 0xb7, 0x69, 0x47, 0x01, 0xa7, 0x26, 0xfe, 0x72, 0x06, 0x49, 0x04,
+ 0x1b, 0xdf, 0x89, 0x0a, 0x4d, 0x01, 0xfe, 0xd8, 0x14, 0x1f, 0xfe, 0x68, 0x06, 0x11, 0x9a, 0x01,
+ 0x43, 0x11, 0xfe, 0xe5, 0x00, 0x05, 0x3f, 0xb4, 0x0c, 0x3f, 0x17, 0x06, 0x01, 0xa7, 0xec, 0x72,
+ 0x70, 0x01, 0x6e, 0x87, 0x11, 0xfe, 0xe2, 0x00, 0x01, 0x08, 0x25, 0x32, 0xfe, 0x0a, 0xf0, 0xfe,
+ 0xa6, 0x06, 0x8c, 0xfe, 0x5c, 0x07, 0xfe, 0x06, 0xf0, 0xfe, 0x64, 0x07, 0x8d, 0x81, 0x02, 0x22,
+ 0x09, 0x04, 0x0b, 0xfe, 0x2e, 0x12, 0x15, 0x1a, 0x01, 0x08, 0x15, 0x00, 0x01, 0x08, 0x15, 0x00,
+ 0x01, 0x08, 0x15, 0x00, 0x01, 0x08, 0xfe, 0x99, 0xa4, 0x01, 0x08, 0x15, 0x00, 0x02, 0xfe, 0x32,
+ 0x08, 0x61, 0x04, 0x1b, 0xfe, 0x38, 0x12, 0x09, 0x04, 0x1b, 0x6e, 0x15, 0xfe, 0x1b, 0x00, 0x01,
+ 0x08, 0x15, 0x00, 0x01, 0x08, 0x15, 0x00, 0x01, 0x08, 0x15, 0x00, 0x01, 0x08, 0x15, 0x06, 0x01,
+ 0x08, 0x15, 0x00, 0x02, 0xd9, 0x66, 0x4c, 0xfe, 0x3a, 0x55, 0x5f, 0xfe, 0x9a, 0x81, 0x4b, 0x1d,
+ 0xba, 0xfe, 0x32, 0x07, 0x0a, 0x1d, 0xfe, 0x09, 0x6f, 0xaf, 0xfe, 0xca, 0x45, 0xfe, 0x32, 0x12,
+ 0x62, 0x2c, 0x85, 0x66, 0x7b, 0x01, 0x08, 0x25, 0x32, 0xfe, 0x0a, 0xf0, 0xfe, 0x32, 0x07, 0x8d,
+ 0x81, 0x8c, 0xfe, 0x5c, 0x07, 0x02, 0x22, 0x01, 0x43, 0x02, 0xfe, 0x8a, 0x06, 0x15, 0x19, 0x02,
+ 0xfe, 0x8a, 0x06, 0xfe, 0x9c, 0xf7, 0xd4, 0xfe, 0x2c, 0x90, 0xfe, 0xae, 0x90, 0x77, 0xfe, 0xca,
+ 0x07, 0x0c, 0x54, 0x18, 0x55, 0x09, 0x4a, 0x6a, 0x35, 0x1e, 0x20, 0x07, 0x10, 0xfe, 0x0e, 0x12,
+ 0x74, 0xfe, 0x80, 0x80, 0x37, 0x20, 0x63, 0x27, 0xfe, 0x06, 0x10, 0xfe, 0x83, 0xe7, 0xc4, 0xa1,
+ 0xfe, 0x03, 0x40, 0x09, 0x4a, 0x4f, 0x35, 0x01, 0xa8, 0xad, 0xfe, 0x1f, 0x40, 0x12, 0x58, 0x01,
+ 0xa5, 0xfe, 0x08, 0x50, 0xfe, 0x8a, 0x50, 0xfe, 0x44, 0x51, 0xfe, 0xc6, 0x51, 0x83, 0xfb, 0xfe,
+ 0x8a, 0x90, 0x0c, 0x52, 0x18, 0x53, 0xfe, 0x0c, 0x90, 0xfe, 0x8e, 0x90, 0xfe, 0x40, 0x50, 0xfe,
+ 0xc2, 0x50, 0x0c, 0x39, 0x18, 0x3a, 0xfe, 0x4a, 0x10, 0x09, 0x04, 0x6a, 0xfe, 0x2a, 0x12, 0xfe,
+ 0x2c, 0x90, 0xfe, 0xae, 0x90, 0x0c, 0x54, 0x18, 0x55, 0x09, 0x04, 0x4f, 0x85, 0x01, 0xa8, 0xfe,
+ 0x1f, 0x80, 0x12, 0x58, 0xfe, 0x44, 0x90, 0xfe, 0xc6, 0x90, 0x0c, 0x56, 0x18, 0x57, 0xfb, 0xfe,
+ 0x8a, 0x90, 0x0c, 0x52, 0x18, 0x53, 0xfe, 0x40, 0x90, 0xfe, 0xc2, 0x90, 0x0c, 0x39, 0x18, 0x3a,
+ 0x0c, 0x38, 0x18, 0x4e, 0x09, 0x4a, 0x19, 0x35, 0x2a, 0x13, 0xfe, 0x4e, 0x11, 0x65, 0xfe, 0x48,
+ 0x08, 0xfe, 0x9e, 0xf0, 0xfe, 0x5c, 0x08, 0xb1, 0x16, 0x32, 0x2a, 0x73, 0xdd, 0xb8, 0xfe, 0x80,
+ 0x08, 0xb9, 0xfe, 0x9e, 0x08, 0x8c, 0xfe, 0x74, 0x08, 0xfe, 0x06, 0xf0, 0xfe, 0x7a, 0x08, 0x8d,
+ 0x81, 0x02, 0x22, 0x01, 0x43, 0xfe, 0xc9, 0x10, 0x15, 0x19, 0xfe, 0xc9, 0x10, 0x61, 0x04, 0x06,
+ 0xfe, 0x10, 0x12, 0x61, 0x04, 0x0b, 0x45, 0x09, 0x04, 0x0b, 0xfe, 0x68, 0x12, 0xfe, 0x2e, 0x1c,
+ 0x02, 0xfe, 0x24, 0x0a, 0x61, 0x04, 0x06, 0x45, 0x61, 0x04, 0x0b, 0xfe, 0x52, 0x12, 0xfe, 0x2c,
+ 0x1c, 0xfe, 0xaa, 0xf0, 0xfe, 0x1e, 0x09, 0xfe, 0xac, 0xf0, 0xfe, 0xbe, 0x08, 0xfe, 0x8a, 0x10,
+ 0xaa, 0xfe, 0xf3, 0x10, 0xfe, 0xad, 0xf0, 0xfe, 0xca, 0x08, 0x02, 0xfe, 0x24, 0x0a, 0xab, 0xfe,
+ 0xe7, 0x10, 0xfe, 0x2b, 0xf0, 0x9d, 0xe9, 0x1c, 0xfe, 0x00, 0xfe, 0xfe, 0x1c, 0x12, 0xb5, 0xfe,
+ 0xd2, 0xf0, 0x9d, 0xfe, 0x76, 0x18, 0x1c, 0x1a, 0x16, 0x9d, 0x05, 0xcb, 0x1c, 0x06, 0x16, 0x9d,
+ 0xb8, 0x6d, 0xb9, 0x6d, 0xaa, 0xab, 0xfe, 0xb1, 0x10, 0x70, 0x5e, 0x2b, 0x14, 0x92, 0x01, 0x33,
+ 0x0f, 0xfe, 0x35, 0x00, 0xfe, 0x01, 0xf0, 0x5a, 0x0f, 0x7c, 0x02, 0x5a, 0xfe, 0x74, 0x18, 0x1c,
+ 0xfe, 0x00, 0xf8, 0x16, 0x6d, 0x67, 0x1b, 0x01, 0xfe, 0x44, 0x0d, 0x3b, 0x01, 0xe6, 0x1e, 0x27,
+ 0x74, 0x67, 0x1a, 0x02, 0x6d, 0x09, 0x04, 0x0b, 0x21, 0xfe, 0x06, 0x0a, 0x09, 0x04, 0x6a, 0xfe,
+ 0x82, 0x12, 0x09, 0x04, 0x19, 0xfe, 0x66, 0x13, 0x1e, 0x58, 0xac, 0xfc, 0xfe, 0x83, 0x80, 0xfe,
+ 0xc8, 0x44, 0xfe, 0x2e, 0x13, 0xfe, 0x04, 0x91, 0xfe, 0x86, 0x91, 0x63, 0x27, 0xfe, 0x40, 0x59,
+ 0xfe, 0xc1, 0x59, 0x77, 0xd7, 0x05, 0x54, 0x31, 0x55, 0x0c, 0x7b, 0x18, 0x7c, 0xbe, 0x54, 0xbf,
+ 0x55, 0x01, 0xa8, 0xad, 0x63, 0x27, 0x12, 0x58, 0xc0, 0x38, 0xc1, 0x4e, 0x79, 0x56, 0x68, 0x57,
+ 0xf4, 0xf5, 0xfe, 0x04, 0xfa, 0x38, 0xfe, 0x05, 0xfa, 0x4e, 0x01, 0xa5, 0xa2, 0x23, 0x0c, 0x7b,
+ 0x0c, 0x7c, 0x79, 0x56, 0x68, 0x57, 0xfe, 0x12, 0x10, 0x09, 0x04, 0x19, 0x16, 0xd7, 0x79, 0x39,
+ 0x68, 0x3a, 0x09, 0x04, 0xfe, 0xf7, 0x00, 0x35, 0x05, 0x52, 0x31, 0x53, 0xfe, 0x10, 0x58, 0xfe,
+ 0x91, 0x58, 0xfe, 0x14, 0x59, 0xfe, 0x95, 0x59, 0x02, 0x6d, 0x09, 0x04, 0x19, 0x16, 0xd7, 0x09,
+ 0x04, 0xfe, 0xf7, 0x00, 0x35, 0xfe, 0x3a, 0x55, 0xfe, 0x19, 0x81, 0x5f, 0xfe, 0x10, 0x90, 0xfe,
+ 0x92, 0x90, 0xfe, 0xd7, 0x10, 0x2f, 0x07, 0x9b, 0x16, 0xfe, 0xc6, 0x08, 0x11, 0x9b, 0x09, 0x04,
+ 0x0b, 0xfe, 0x14, 0x13, 0x05, 0x39, 0x31, 0x3a, 0x77, 0xfe, 0xc6, 0x08, 0xfe, 0x0c, 0x58, 0xfe,
+ 0x8d, 0x58, 0x02, 0x6d, 0x23, 0x47, 0xfe, 0x19, 0x80, 0xde, 0x09, 0x04, 0x0b, 0xfe, 0x1a, 0x12,
+ 0xfe, 0x6c, 0x19, 0xfe, 0x19, 0x41, 0xe9, 0xb5, 0xfe, 0xd1, 0xf0, 0xd9, 0x14, 0x7a, 0x01, 0x33,
+ 0x0f, 0xfe, 0x44, 0x00, 0xfe, 0x8e, 0x10, 0xfe, 0x6c, 0x19, 0xbe, 0x39, 0xfe, 0xed, 0x19, 0xbf,
+ 0x3a, 0xfe, 0x0c, 0x51, 0xfe, 0x8e, 0x51, 0xe9, 0x1c, 0xfe, 0x00, 0xff, 0x34, 0xfe, 0x74, 0x10,
+ 0xb5, 0xfe, 0xd2, 0xf0, 0xfe, 0xb2, 0x0a, 0xfe, 0x76, 0x18, 0x1c, 0x1a, 0x84, 0x05, 0xcb, 0x1c,
+ 0x06, 0xfe, 0x08, 0x13, 0x0f, 0xfe, 0x16, 0x00, 0x02, 0x5a, 0xfe, 0xd1, 0xf0, 0xfe, 0xc4, 0x0a,
+ 0x14, 0x7a, 0x01, 0x33, 0x0f, 0xfe, 0x17, 0x00, 0xfe, 0x42, 0x10, 0xfe, 0xce, 0xf0, 0xfe, 0xca,
+ 0x0a, 0xfe, 0x3c, 0x10, 0xfe, 0xcd, 0xf0, 0xfe, 0xd6, 0x0a, 0x0f, 0xfe, 0x22, 0x00, 0x02, 0x5a,
+ 0xfe, 0xcb, 0xf0, 0xfe, 0xe2, 0x0a, 0x0f, 0xfe, 0x24, 0x00, 0x02, 0x5a, 0xfe, 0xd0, 0xf0, 0xfe,
+ 0xec, 0x0a, 0x0f, 0x93, 0xdc, 0xfe, 0xcf, 0xf0, 0xfe, 0xf6, 0x0a, 0x0f, 0x4c, 0xfe, 0x10, 0x10,
+ 0xfe, 0xcc, 0xf0, 0xd9, 0x61, 0x04, 0x19, 0x3b, 0x0f, 0xfe, 0x12, 0x00, 0x2a, 0x13, 0xfe, 0x4e,
+ 0x11, 0x65, 0xfe, 0x0c, 0x0b, 0xfe, 0x9e, 0xf0, 0xfe, 0x20, 0x0b, 0xb1, 0x16, 0x32, 0x2a, 0x73,
+ 0xdd, 0xb8, 0x22, 0xb9, 0x22, 0x2a, 0xec, 0x65, 0xfe, 0x2c, 0x0b, 0x25, 0x32, 0x8c, 0xfe, 0x48,
+ 0x0b, 0x8d, 0x81, 0xb8, 0xd4, 0xb9, 0xd4, 0x02, 0x22, 0x01, 0x43, 0xfe, 0xdb, 0x10, 0x11, 0xfe,
+ 0xe8, 0x00, 0xaa, 0xab, 0x70, 0xbc, 0x7d, 0xbd, 0x7f, 0xfe, 0x89, 0xf0, 0x22, 0x30, 0x2e, 0xd8,
+ 0xbc, 0x7d, 0xbd, 0x7f, 0x01, 0x08, 0x1f, 0x22, 0x30, 0x2e, 0xd6, 0xb1, 0x45, 0x0f, 0xfe, 0x42,
+ 0x00, 0x02, 0x5a, 0x78, 0x06, 0xfe, 0x81, 0x49, 0x16, 0xfe, 0x38, 0x0c, 0x09, 0x04, 0x0b, 0xfe,
+ 0x44, 0x13, 0x0f, 0x00, 0x4b, 0x0b, 0xfe, 0x54, 0x12, 0x4b, 0xfe, 0x28, 0x00, 0x21, 0xfe, 0xa6,
+ 0x0c, 0x0a, 0x40, 0x01, 0x0e, 0x07, 0x00, 0x5d, 0x3e, 0xfe, 0x28, 0x00, 0xfe, 0xe2, 0x10, 0x01,
+ 0xe7, 0x01, 0xe8, 0x0a, 0x99, 0x01, 0xfe, 0x32, 0x0e, 0x59, 0x11, 0x2d, 0x01, 0x6f, 0x02, 0x29,
+ 0x0f, 0xfe, 0x44, 0x00, 0x4b, 0x0b, 0xdf, 0x3e, 0x0b, 0xfe, 0xb4, 0x10, 0x01, 0x86, 0x3e, 0x0b,
+ 0xfe, 0xaa, 0x10, 0x01, 0x86, 0xfe, 0x19, 0x82, 0xfe, 0x34, 0x46, 0xa3, 0x3e, 0x0b, 0x0f, 0xfe,
+ 0x43, 0x00, 0xfe, 0x96, 0x10, 0x09, 0x4a, 0x0b, 0x35, 0x01, 0xe7, 0x01, 0xe8, 0x59, 0x11, 0x2d,
+ 0x01, 0x6f, 0x67, 0x0b, 0x59, 0x3c, 0x8a, 0x02, 0xfe, 0x2a, 0x03, 0x09, 0x04, 0x0b, 0x84, 0x3e,
+ 0x0b, 0x0f, 0x00, 0xfe, 0x5c, 0x10, 0x61, 0x04, 0x1b, 0xfe, 0x58, 0x12, 0x09, 0x04, 0x1b, 0xfe,
+ 0x50, 0x13, 0xfe, 0x1c, 0x1c, 0xfe, 0x9d, 0xf0, 0xfe, 0x5c, 0x0c, 0xfe, 0x1c, 0x1c, 0xfe, 0x9d,
+ 0xf0, 0xfe, 0x62, 0x0c, 0x09, 0x4a, 0x1b, 0x35, 0xfe, 0xa9, 0x10, 0x0f, 0xfe, 0x15, 0x00, 0xfe,
+ 0x04, 0xe6, 0x0b, 0x5f, 0x5c, 0x0f, 0xfe, 0x13, 0x00, 0xfe, 0x10, 0x10, 0x0f, 0xfe, 0x47, 0x00,
+ 0xa1, 0x0f, 0xfe, 0x41, 0x00, 0xa0, 0x0f, 0xfe, 0x24, 0x00, 0x87, 0xaa, 0xab, 0x70, 0x05, 0x6b,
+ 0x28, 0x21, 0xd1, 0x5f, 0xfe, 0x04, 0xe6, 0x1b, 0xfe, 0x9d, 0x41, 0xfe, 0x1c, 0x42, 0x59, 0x01,
+ 0xda, 0x02, 0x29, 0xea, 0x14, 0x0b, 0x37, 0x95, 0xa9, 0x14, 0xfe, 0x31, 0x00, 0x37, 0x97, 0x01,
+ 0xfe, 0x54, 0x0f, 0x02, 0xd0, 0x3c, 0xfe, 0x06, 0xec, 0xc9, 0xee, 0x3e, 0x1d, 0xfe, 0xce, 0x45,
+ 0x34, 0x3c, 0xfe, 0x06, 0xea, 0xc9, 0xfe, 0x47, 0x4b, 0x89, 0xfe, 0x75, 0x57, 0x05, 0x51, 0xfe,
+ 0x98, 0x56, 0xfe, 0x38, 0x12, 0x0a, 0x42, 0x01, 0x0e, 0xfe, 0x44, 0x48, 0x46, 0x09, 0x04, 0x1d,
+ 0xfe, 0x1a, 0x13, 0x0a, 0x40, 0x01, 0x0e, 0x47, 0xfe, 0x41, 0x58, 0x0a, 0x99, 0x01, 0x0e, 0xfe,
+ 0x49, 0x54, 0x8e, 0xfe, 0x2a, 0x0d, 0x02, 0xfe, 0x2a, 0x03, 0x0a, 0x51, 0xfe, 0xee, 0x14, 0xee,
+ 0x3e, 0x1d, 0xfe, 0xce, 0x45, 0x34, 0x3c, 0xfe, 0xce, 0x47, 0xfe, 0xad, 0x13, 0x02, 0x29, 0x1e,
+ 0x20, 0x07, 0x10, 0xfe, 0x9e, 0x12, 0x23, 0x12, 0x4d, 0x12, 0x94, 0x12, 0xce, 0x1e, 0x2d, 0x47,
+ 0x37, 0x2d, 0xb1, 0xe0, 0xfe, 0xbc, 0xf0, 0xfe, 0xec, 0x0d, 0x13, 0x06, 0x12, 0x4d, 0x01, 0xfe,
+ 0xe2, 0x15, 0x05, 0xfe, 0x38, 0x01, 0x31, 0xfe, 0x3a, 0x01, 0x77, 0xfe, 0xf0, 0x0d, 0xfe, 0x02,
+ 0xec, 0xce, 0x62, 0x00, 0x5d, 0xfe, 0x04, 0xec, 0x20, 0x46, 0xfe, 0x05, 0xf6, 0xfe, 0x34, 0x01,
+ 0x01, 0xfe, 0x52, 0x16, 0xfb, 0xfe, 0x48, 0xf4, 0x0d, 0xfe, 0x18, 0x13, 0xaf, 0xfe, 0x02, 0xea,
+ 0xce, 0x62, 0x7a, 0xfe, 0xc5, 0x13, 0x14, 0x1b, 0x37, 0x95, 0xa9, 0x5c, 0x05, 0xfe, 0x38, 0x01,
+ 0x1c, 0xfe, 0xf0, 0xff, 0x0c, 0xfe, 0x60, 0x01, 0x05, 0xfe, 0x3a, 0x01, 0x0c, 0xfe, 0x62, 0x01,
+ 0x3d, 0x12, 0x20, 0x24, 0x06, 0x12, 0x2d, 0x11, 0x2d, 0x8a, 0x13, 0x06, 0x03, 0x23, 0x03, 0x1e,
+ 0x4d, 0xfe, 0xf7, 0x12, 0x1e, 0x94, 0xac, 0x12, 0x94, 0x07, 0x7a, 0xfe, 0x71, 0x13, 0xfe, 0x24,
+ 0x1c, 0x14, 0x1a, 0x37, 0x95, 0xa9, 0xfe, 0xd9, 0x10, 0xb6, 0xfe, 0x03, 0xdc, 0xfe, 0x73, 0x57,
+ 0xfe, 0x80, 0x5d, 0x03, 0xb6, 0xfe, 0x03, 0xdc, 0xfe, 0x5b, 0x57, 0xfe, 0x80, 0x5d, 0x03, 0xfe,
+ 0x03, 0x57, 0xb6, 0x23, 0xfe, 0x00, 0xcc, 0x03, 0xfe, 0x03, 0x57, 0xb6, 0x75, 0x03, 0x09, 0x04,
+ 0x4c, 0xfe, 0x22, 0x13, 0xfe, 0x1c, 0x80, 0x07, 0x06, 0xfe, 0x1a, 0x13, 0xfe, 0x1e, 0x80, 0xe1,
+ 0xfe, 0x1d, 0x80, 0xa4, 0xfe, 0x0c, 0x90, 0xfe, 0x0e, 0x13, 0xfe, 0x0e, 0x90, 0xa3, 0xfe, 0x3c,
+ 0x90, 0xfe, 0x30, 0xf4, 0x0b, 0xfe, 0x3c, 0x50, 0xa0, 0x01, 0xfe, 0x82, 0x16, 0x2f, 0x07, 0x2d,
+ 0xe0, 0x01, 0xfe, 0xbc, 0x15, 0x09, 0x04, 0x1d, 0x45, 0x01, 0xe7, 0x01, 0xe8, 0x11, 0xfe, 0xe9,
+ 0x00, 0x09, 0x04, 0x4c, 0xfe, 0x2c, 0x13, 0x01, 0xfe, 0x14, 0x16, 0xfe, 0x1e, 0x1c, 0xfe, 0x14,
+ 0x90, 0xfe, 0x96, 0x90, 0x0c, 0xfe, 0x64, 0x01, 0x18, 0xfe, 0x66, 0x01, 0x09, 0x04, 0x4f, 0xfe,
+ 0x12, 0x12, 0xfe, 0x03, 0x80, 0x74, 0xfe, 0x01, 0xec, 0x20, 0xfe, 0x80, 0x40, 0x12, 0x20, 0x63,
+ 0x27, 0x11, 0xc8, 0x59, 0x1e, 0x20, 0xed, 0x76, 0x20, 0x03, 0xfe, 0x08, 0x1c, 0x05, 0xfe, 0xac,
+ 0x00, 0xfe, 0x06, 0x58, 0x05, 0xfe, 0xae, 0x00, 0xfe, 0x07, 0x58, 0x05, 0xfe, 0xb0, 0x00, 0xfe,
+ 0x08, 0x58, 0x05, 0xfe, 0xb2, 0x00, 0xfe, 0x09, 0x58, 0xfe, 0x0a, 0x1c, 0x24, 0x69, 0x12, 0xc9,
+ 0x23, 0x0c, 0x50, 0x0c, 0x3f, 0x13, 0x40, 0x48, 0x5f, 0x17, 0x1d, 0xfe, 0x90, 0x4d, 0xfe, 0x91,
+ 0x54, 0x21, 0xfe, 0x08, 0x0f, 0x3e, 0x10, 0x13, 0x42, 0x48, 0x17, 0x4c, 0xfe, 0x90, 0x4d, 0xfe,
+ 0x91, 0x54, 0x21, 0xfe, 0x1e, 0x0f, 0x24, 0x10, 0x12, 0x20, 0x78, 0x2c, 0x46, 0x1e, 0x20, 0xed,
+ 0x76, 0x20, 0x11, 0xc8, 0xf6, 0xfe, 0xd6, 0xf0, 0xfe, 0x32, 0x0f, 0xea, 0x70, 0xfe, 0x14, 0x1c,
+ 0xfe, 0x10, 0x1c, 0xfe, 0x18, 0x1c, 0x03, 0x3c, 0xfe, 0x0c, 0x14, 0xee, 0xfe, 0x07, 0xe6, 0x1d,
+ 0xfe, 0xce, 0x47, 0xfe, 0xf5, 0x13, 0x03, 0x01, 0x86, 0x78, 0x2c, 0x46, 0xfa, 0xef, 0xfe, 0x42,
+ 0x13, 0x2f, 0x07, 0x2d, 0xfe, 0x34, 0x13, 0x0a, 0x42, 0x01, 0x0e, 0xb0, 0xfe, 0x36, 0x12, 0xf0,
+ 0xfe, 0x45, 0x48, 0x01, 0xe3, 0xfe, 0x00, 0xcc, 0xb0, 0xfe, 0xf3, 0x13, 0x3d, 0x75, 0x07, 0x10,
+ 0xa3, 0x0a, 0x80, 0x01, 0x0e, 0xfe, 0x80, 0x5c, 0x01, 0x6f, 0xfe, 0x0e, 0x10, 0x07, 0x7e, 0x45,
+ 0xf6, 0xfe, 0xd6, 0xf0, 0xfe, 0x6c, 0x0f, 0x03, 0xfe, 0x44, 0x58, 0x74, 0xfe, 0x01, 0xec, 0x97,
+ 0xfe, 0x9e, 0x40, 0xfe, 0x9d, 0xe7, 0x00, 0xfe, 0x9c, 0xe7, 0x1b, 0x76, 0x27, 0x01, 0xda, 0xfe,
+ 0xdd, 0x10, 0x2a, 0xbc, 0x7d, 0xbd, 0x7f, 0x30, 0x2e, 0xd5, 0x07, 0x1b, 0xfe, 0x48, 0x12, 0x07,
+ 0x0b, 0xfe, 0x56, 0x12, 0x07, 0x1a, 0xfe, 0x30, 0x12, 0x07, 0xc2, 0x16, 0xfe, 0x3e, 0x11, 0x07,
+ 0xfe, 0x23, 0x00, 0x16, 0xfe, 0x4a, 0x11, 0x07, 0x06, 0x16, 0xfe, 0xa8, 0x11, 0x07, 0x19, 0xfe,
+ 0x12, 0x12, 0x07, 0x00, 0x16, 0x22, 0x14, 0xc2, 0x01, 0x33, 0x9f, 0x2b, 0x01, 0x08, 0x8c, 0x43,
+ 0x03, 0x2b, 0xfe, 0x62, 0x08, 0x0a, 0xca, 0x01, 0xfe, 0x32, 0x0e, 0x11, 0x7e, 0x02, 0x29, 0x2b,
+ 0x2f, 0x07, 0x9b, 0xfe, 0xd9, 0x13, 0x79, 0x39, 0x68, 0x3a, 0x77, 0xfe, 0xfc, 0x10, 0x09, 0x04,
+ 0x6a, 0xfe, 0x72, 0x12, 0xc0, 0x38, 0xc1, 0x4e, 0xf4, 0xf5, 0x8e, 0xfe, 0xc6, 0x10, 0x1e, 0x58,
+ 0xfe, 0x26, 0x13, 0x05, 0x7b, 0x31, 0x7c, 0x77, 0xfe, 0x82, 0x0c, 0x0c, 0x54, 0x18, 0x55, 0x23,
+ 0x0c, 0x7b, 0x0c, 0x7c, 0x01, 0xa8, 0x24, 0x69, 0x73, 0x12, 0x58, 0x01, 0xa5, 0xc0, 0x38, 0xc1,
+ 0x4e, 0xfe, 0x04, 0x55, 0xfe, 0xa5, 0x55, 0xfe, 0x04, 0xfa, 0x38, 0xfe, 0x05, 0xfa, 0x4e, 0xfe,
+ 0x91, 0x10, 0x05, 0x56, 0x31, 0x57, 0xfe, 0x40, 0x56, 0xfe, 0xe1, 0x56, 0x0c, 0x56, 0x18, 0x57,
+ 0x83, 0xc0, 0x38, 0xc1, 0x4e, 0xf4, 0xf5, 0x05, 0x52, 0x31, 0x53, 0xfe, 0x00, 0x56, 0xfe, 0xa1,
+ 0x56, 0x0c, 0x52, 0x18, 0x53, 0x09, 0x04, 0x6a, 0xfe, 0x1e, 0x12, 0x1e, 0x58, 0xfe, 0x1f, 0x40,
+ 0x05, 0x54, 0x31, 0x55, 0xfe, 0x2c, 0x50, 0xfe, 0xae, 0x50, 0x05, 0x56, 0x31, 0x57, 0xfe, 0x44,
+ 0x50, 0xfe, 0xc6, 0x50, 0x05, 0x52, 0x31, 0x53, 0xfe, 0x08, 0x50, 0xfe, 0x8a, 0x50, 0x05, 0x39,
+ 0x31, 0x3a, 0xfe, 0x40, 0x50, 0xfe, 0xc2, 0x50, 0x02, 0x5c, 0x24, 0x06, 0x12, 0xcd, 0x02, 0x5b,
+ 0x2b, 0x01, 0x08, 0x1f, 0x44, 0x30, 0x2e, 0xd5, 0x07, 0x06, 0x21, 0x44, 0x2f, 0x07, 0x9b, 0x21,
+ 0x5b, 0x01, 0x6e, 0x1c, 0x3d, 0x16, 0x44, 0x09, 0x04, 0x0b, 0xe2, 0x79, 0x39, 0x68, 0x3a, 0xfe,
+ 0x0a, 0x55, 0x34, 0xfe, 0x8b, 0x55, 0xbe, 0x39, 0xbf, 0x3a, 0xfe, 0x0c, 0x51, 0xfe, 0x8e, 0x51,
+ 0x02, 0x5b, 0xfe, 0x19, 0x81, 0xaf, 0xfe, 0x19, 0x41, 0x02, 0x5b, 0x2b, 0x01, 0x08, 0x25, 0x32,
+ 0x1f, 0xa2, 0x30, 0x2e, 0xd8, 0x4b, 0x1a, 0xfe, 0xa6, 0x12, 0x4b, 0x0b, 0x3b, 0x02, 0x44, 0x01,
+ 0x08, 0x25, 0x32, 0x1f, 0xa2, 0x30, 0x2e, 0xd6, 0x07, 0x1a, 0x21, 0x44, 0x01, 0x08, 0x1f, 0xa2,
+ 0x30, 0x2e, 0xfe, 0xe8, 0x09, 0xfe, 0xc2, 0x49, 0x60, 0x05, 0xfe, 0x9c, 0x00, 0x28, 0x84, 0x49,
+ 0x04, 0x19, 0x34, 0x9f, 0xfe, 0xbb, 0x45, 0x4b, 0x00, 0x45, 0x3e, 0x06, 0x78, 0x3d, 0xfe, 0xda,
+ 0x14, 0x01, 0x6e, 0x87, 0xfe, 0x4b, 0x45, 0xe2, 0x2f, 0x07, 0x9a, 0xe1, 0x05, 0xc6, 0x28, 0x84,
+ 0x05, 0x3f, 0x28, 0x34, 0x5e, 0x02, 0x5b, 0xfe, 0xc0, 0x5d, 0xfe, 0xf8, 0x14, 0xfe, 0x03, 0x17,
+ 0x05, 0x50, 0xb4, 0x0c, 0x50, 0x5e, 0x2b, 0x01, 0x08, 0x26, 0x5c, 0x01, 0xfe, 0xaa, 0x14, 0x02,
+ 0x5c, 0x01, 0x08, 0x25, 0x32, 0x1f, 0x44, 0x30, 0x2e, 0xd6, 0x07, 0x06, 0x21, 0x44, 0x01, 0xfe,
+ 0x8e, 0x13, 0xfe, 0x42, 0x58, 0xfe, 0x82, 0x14, 0xfe, 0xa4, 0x14, 0x87, 0xfe, 0x4a, 0xf4, 0x0b,
+ 0x16, 0x44, 0xfe, 0x4a, 0xf4, 0x06, 0xfe, 0x0c, 0x12, 0x2f, 0x07, 0x9a, 0x85, 0x02, 0x5b, 0x05,
+ 0x3f, 0xb4, 0x0c, 0x3f, 0x5e, 0x2b, 0x01, 0x08, 0x26, 0x5c, 0x01, 0xfe, 0xd8, 0x14, 0x02, 0x5c,
+ 0x13, 0x06, 0x65, 0xfe, 0xca, 0x12, 0x26, 0xfe, 0xe0, 0x12, 0x72, 0xf1, 0x01, 0x08, 0x23, 0x72,
+ 0x03, 0x8f, 0xfe, 0xdc, 0x12, 0x25, 0xfe, 0xdc, 0x12, 0x1f, 0xfe, 0xca, 0x12, 0x5e, 0x2b, 0x01,
+ 0x08, 0xfe, 0xd5, 0x10, 0x13, 0x6c, 0xff, 0x02, 0x00, 0x57, 0x48, 0x8b, 0x1c, 0xfe, 0xff, 0x7f,
+ 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x03, 0x13, 0x6c, 0xff, 0x02, 0x00, 0x57, 0x48, 0x8b, 0x1c,
+ 0x3d, 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x03, 0x13, 0x6c, 0xff, 0x02, 0x00, 0x57, 0x48, 0x8b,
+ 0x03, 0x13, 0x6c, 0xff, 0x02, 0x00, 0x57, 0x48, 0x8b, 0xfe, 0x0b, 0x58, 0x03, 0x0a, 0x50, 0x01,
+ 0x82, 0x0a, 0x3f, 0x01, 0x82, 0x03, 0xfc, 0x1c, 0x10, 0xff, 0x03, 0x00, 0x54, 0xfe, 0x00, 0xf4,
+ 0x19, 0x48, 0xfe, 0x00, 0x7d, 0xfe, 0x01, 0x7d, 0xfe, 0x02, 0x7d, 0xfe, 0x03, 0x7c, 0x63, 0x27,
+ 0x0c, 0x52, 0x18, 0x53, 0xbe, 0x56, 0xbf, 0x57, 0x03, 0xfe, 0x62, 0x08, 0xfe, 0x82, 0x4a, 0xfe,
+ 0xe1, 0x1a, 0xfe, 0x83, 0x5a, 0x74, 0x03, 0x01, 0xfe, 0x14, 0x18, 0xfe, 0x42, 0x48, 0x5f, 0x60,
+ 0x89, 0x01, 0x08, 0x1f, 0xfe, 0xa2, 0x14, 0x30, 0x2e, 0xd8, 0x01, 0x08, 0x1f, 0xfe, 0xa2, 0x14,
+ 0x30, 0x2e, 0xfe, 0xe8, 0x0a, 0xfe, 0xc1, 0x59, 0x05, 0xc6, 0x28, 0xfe, 0xcc, 0x12, 0x49, 0x04,
+ 0x1b, 0xfe, 0xc4, 0x13, 0x23, 0x62, 0x1b, 0xe2, 0x4b, 0xc3, 0x64, 0xfe, 0xe8, 0x13, 0x3b, 0x13,
+ 0x06, 0x17, 0xc3, 0x78, 0xdb, 0xfe, 0x78, 0x10, 0xff, 0x02, 0x83, 0x55, 0xa1, 0xff, 0x02, 0x83,
+ 0x55, 0x62, 0x1a, 0xa4, 0xbb, 0xfe, 0x30, 0x00, 0x8e, 0xe4, 0x17, 0x2c, 0x13, 0x06, 0xfe, 0x56,
+ 0x10, 0x62, 0x0b, 0xe1, 0xbb, 0xfe, 0x64, 0x00, 0x8e, 0xe4, 0x0a, 0xfe, 0x64, 0x00, 0x17, 0x93,
+ 0x13, 0x06, 0xfe, 0x28, 0x10, 0x62, 0x06, 0xfe, 0x60, 0x13, 0xbb, 0xfe, 0xc8, 0x00, 0x8e, 0xe4,
+ 0x0a, 0xfe, 0xc8, 0x00, 0x17, 0x4d, 0x13, 0x06, 0x83, 0xbb, 0xfe, 0x90, 0x01, 0xba, 0xfe, 0x4e,
+ 0x14, 0x89, 0xfe, 0x12, 0x10, 0xfe, 0x43, 0xf4, 0x94, 0xfe, 0x56, 0xf0, 0xfe, 0x60, 0x14, 0xfe,
+ 0x04, 0xf4, 0x6c, 0xfe, 0x43, 0xf4, 0x93, 0xfe, 0xf3, 0x10, 0xf9, 0x01, 0xfe, 0x22, 0x13, 0x1c,
+ 0x3d, 0xfe, 0x10, 0x13, 0xfe, 0x00, 0x17, 0xfe, 0x4d, 0xe4, 0x69, 0xba, 0xfe, 0x9c, 0x14, 0xb7,
+ 0x69, 0xfe, 0x1c, 0x10, 0xfe, 0x00, 0x17, 0xfe, 0x4d, 0xe4, 0x19, 0xba, 0xfe, 0x9c, 0x14, 0xb7,
+ 0x19, 0x83, 0x60, 0x23, 0xfe, 0x4d, 0xf4, 0x00, 0xdf, 0x89, 0x13, 0x06, 0xfe, 0xb4, 0x56, 0xfe,
+ 0xc3, 0x58, 0x03, 0x60, 0x13, 0x0b, 0x03, 0x15, 0x06, 0x01, 0x08, 0x26, 0xe5, 0x15, 0x0b, 0x01,
+ 0x08, 0x26, 0xe5, 0x15, 0x1a, 0x01, 0x08, 0x26, 0xe5, 0x72, 0xfe, 0x89, 0x49, 0x01, 0x08, 0x03,
+ 0x15, 0x06, 0x01, 0x08, 0x26, 0xa6, 0x15, 0x1a, 0x01, 0x08, 0x26, 0xa6, 0x15, 0x06, 0x01, 0x08,
+ 0x26, 0xa6, 0xfe, 0x89, 0x49, 0x01, 0x08, 0x26, 0xa6, 0x72, 0xfe, 0x89, 0x4a, 0x01, 0x08, 0x03,
+ 0x60, 0x03, 0x1e, 0xcc, 0x07, 0x06, 0xfe, 0x44, 0x13, 0xad, 0x12, 0xcc, 0xfe, 0x49, 0xf4, 0x00,
+ 0x3b, 0x72, 0x9f, 0x5e, 0xfe, 0x01, 0xec, 0xfe, 0x27, 0x01, 0xf1, 0x01, 0x08, 0x2f, 0x07, 0xfe,
+ 0xe3, 0x00, 0xfe, 0x20, 0x13, 0x1f, 0xfe, 0x5a, 0x15, 0x23, 0x12, 0xcd, 0x01, 0x43, 0x1e, 0xcd,
+ 0x07, 0x06, 0x45, 0x09, 0x4a, 0x06, 0x35, 0x03, 0x0a, 0x42, 0x01, 0x0e, 0xed, 0x88, 0x07, 0x10,
+ 0xa4, 0x0a, 0x80, 0x01, 0x0e, 0x88, 0x0a, 0x51, 0x01, 0x9e, 0x03, 0x0a, 0x80, 0x01, 0x0e, 0x88,
+ 0xfe, 0x80, 0xe7, 0x10, 0x07, 0x10, 0x84, 0xfe, 0x45, 0x58, 0x01, 0xe3, 0x88, 0x03, 0x0a, 0x42,
+ 0x01, 0x0e, 0x88, 0x0a, 0x51, 0x01, 0x9e, 0x03, 0x0a, 0x42, 0x01, 0x0e, 0xfe, 0x80, 0x80, 0xf2,
+ 0xfe, 0x49, 0xe4, 0x10, 0xa4, 0x0a, 0x80, 0x01, 0x0e, 0xf2, 0x0a, 0x51, 0x01, 0x82, 0x03, 0x17,
+ 0x10, 0x71, 0x66, 0xfe, 0x60, 0x01, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe, 0x24, 0x1c, 0xfe,
+ 0x1d, 0xf7, 0x1d, 0x90, 0xfe, 0xf6, 0x15, 0x01, 0xfe, 0xfc, 0x16, 0xe0, 0x91, 0x1d, 0x66, 0xfe,
+ 0x2c, 0x01, 0xfe, 0x2f, 0x19, 0x03, 0xae, 0x21, 0xfe, 0xe6, 0x15, 0xfe, 0xda, 0x10, 0x17, 0x10,
+ 0x71, 0x05, 0xfe, 0x64, 0x01, 0xfe, 0x00, 0xf4, 0x19, 0xfe, 0x18, 0x58, 0x05, 0xfe, 0x66, 0x01,
+ 0xfe, 0x19, 0x58, 0x91, 0x19, 0xfe, 0x3c, 0x90, 0xfe, 0x30, 0xf4, 0x06, 0xfe, 0x3c, 0x50, 0x66,
+ 0xfe, 0x38, 0x00, 0xfe, 0x0f, 0x79, 0xfe, 0x1c, 0xf7, 0x19, 0x90, 0xfe, 0x40, 0x16, 0xfe, 0xb6,
+ 0x14, 0x34, 0x03, 0xae, 0x21, 0xfe, 0x18, 0x16, 0xfe, 0x9c, 0x10, 0x17, 0x10, 0x71, 0xfe, 0x83,
+ 0x5a, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe, 0x1d, 0xf7, 0x38, 0x90, 0xfe, 0x62, 0x16, 0xfe,
+ 0x94, 0x14, 0xfe, 0x10, 0x13, 0x91, 0x38, 0x66, 0x1b, 0xfe, 0xaf, 0x19, 0xfe, 0x98, 0xe7, 0x00,
+ 0x03, 0xae, 0x21, 0xfe, 0x56, 0x16, 0xfe, 0x6c, 0x10, 0x17, 0x10, 0x71, 0xfe, 0x30, 0xbc, 0xfe,
+ 0xb2, 0xbc, 0x91, 0xc5, 0x66, 0x1b, 0xfe, 0x0f, 0x79, 0xfe, 0x1c, 0xf7, 0xc5, 0x90, 0xfe, 0x9a,
+ 0x16, 0xfe, 0x5c, 0x14, 0x34, 0x03, 0xae, 0x21, 0xfe, 0x86, 0x16, 0xfe, 0x42, 0x10, 0xfe, 0x02,
+ 0xf6, 0x10, 0x71, 0xfe, 0x18, 0xfe, 0x54, 0xfe, 0x19, 0xfe, 0x55, 0xfc, 0xfe, 0x1d, 0xf7, 0x4f,
+ 0x90, 0xfe, 0xc0, 0x16, 0xfe, 0x36, 0x14, 0xfe, 0x1c, 0x13, 0x91, 0x4f, 0x47, 0xfe, 0x83, 0x58,
+ 0xfe, 0xaf, 0x19, 0xfe, 0x80, 0xe7, 0x10, 0xfe, 0x81, 0xe7, 0x10, 0x11, 0xfe, 0xdd, 0x00, 0x63,
+ 0x27, 0x03, 0x63, 0x27, 0xfe, 0x12, 0x45, 0x21, 0xfe, 0xb0, 0x16, 0x14, 0x06, 0x37, 0x95, 0xa9,
+ 0x02, 0x29, 0xfe, 0x39, 0xf0, 0xfe, 0x04, 0x17, 0x23, 0x03, 0xfe, 0x7e, 0x18, 0x1c, 0x1a, 0x5d,
+ 0x13, 0x0d, 0x03, 0x71, 0x05, 0xcb, 0x1c, 0x06, 0xfe, 0xef, 0x12, 0xfe, 0xe1, 0x10, 0x78, 0x2c,
+ 0x46, 0x2f, 0x07, 0x2d, 0xfe, 0x3c, 0x13, 0xfe, 0x82, 0x14, 0xfe, 0x42, 0x13, 0x3c, 0x8a, 0x0a,
+ 0x42, 0x01, 0x0e, 0xb0, 0xfe, 0x3e, 0x12, 0xf0, 0xfe, 0x45, 0x48, 0x01, 0xe3, 0xfe, 0x00, 0xcc,
+ 0xb0, 0xfe, 0xf3, 0x13, 0x3d, 0x75, 0x07, 0x10, 0xa3, 0x0a, 0x80, 0x01, 0x0e, 0xf2, 0x01, 0x6f,
+ 0xfe, 0x16, 0x10, 0x07, 0x7e, 0x85, 0xfe, 0x40, 0x14, 0xfe, 0x24, 0x12, 0xf6, 0xfe, 0xd6, 0xf0,
+ 0xfe, 0x24, 0x17, 0x17, 0x0b, 0x03, 0xfe, 0x9c, 0xe7, 0x0b, 0x0f, 0xfe, 0x15, 0x00, 0x59, 0x76,
+ 0x27, 0x01, 0xda, 0x17, 0x06, 0x03, 0x3c, 0x8a, 0x09, 0x4a, 0x1d, 0x35, 0x11, 0x2d, 0x01, 0x6f,
+ 0x17, 0x06, 0x03, 0xfe, 0x38, 0x90, 0xfe, 0xba, 0x90, 0x79, 0xc7, 0x68, 0xc8, 0xfe, 0x48, 0x55,
+ 0x34, 0xfe, 0xc9, 0x55, 0x03, 0x1e, 0x98, 0x73, 0x12, 0x98, 0x03, 0x0a, 0x99, 0x01, 0x0e, 0xf0,
+ 0x0a, 0x40, 0x01, 0x0e, 0xfe, 0x49, 0x44, 0x16, 0xfe, 0xf0, 0x17, 0x73, 0x75, 0x03, 0x0a, 0x42,
+ 0x01, 0x0e, 0x07, 0x10, 0x45, 0x0a, 0x51, 0x01, 0x9e, 0x0a, 0x40, 0x01, 0x0e, 0x73, 0x75, 0x03,
+ 0xfe, 0x4e, 0xe4, 0x1a, 0x64, 0xfe, 0x24, 0x18, 0x05, 0xfe, 0x90, 0x00, 0xfe, 0x3a, 0x45, 0x5b,
+ 0xfe, 0x4e, 0xe4, 0xc2, 0x64, 0xfe, 0x36, 0x18, 0x05, 0xfe, 0x92, 0x00, 0xfe, 0x02, 0xe6, 0x1b,
+ 0xdc, 0xfe, 0x4e, 0xe4, 0xfe, 0x0b, 0x00, 0x64, 0xfe, 0x48, 0x18, 0x05, 0xfe, 0x94, 0x00, 0xfe,
+ 0x02, 0xe6, 0x19, 0xfe, 0x08, 0x10, 0x05, 0xfe, 0x96, 0x00, 0xfe, 0x02, 0xe6, 0x2c, 0xfe, 0x4e,
+ 0x45, 0xfe, 0x0c, 0x12, 0xaf, 0xff, 0x04, 0x68, 0x54, 0xde, 0x1c, 0x69, 0x03, 0x07, 0x7a, 0xfe,
+ 0x5a, 0xf0, 0xfe, 0x74, 0x18, 0x24, 0xfe, 0x09, 0x00, 0xfe, 0x34, 0x10, 0x07, 0x1b, 0xfe, 0x5a,
+ 0xf0, 0xfe, 0x82, 0x18, 0x24, 0xc3, 0xfe, 0x26, 0x10, 0x07, 0x1a, 0x5d, 0x24, 0x2c, 0xdc, 0x07,
+ 0x0b, 0x5d, 0x24, 0x93, 0xfe, 0x0e, 0x10, 0x07, 0x06, 0x5d, 0x24, 0x4d, 0x9f, 0xad, 0x03, 0x14,
+ 0xfe, 0x09, 0x00, 0x01, 0x33, 0xfe, 0x04, 0xfe, 0x7d, 0x05, 0x7f, 0xf9, 0x03, 0x25, 0xfe, 0xca,
+ 0x18, 0xfe, 0x14, 0xf0, 0x08, 0x65, 0xfe, 0xc6, 0x18, 0x03, 0xff, 0x1a, 0x00, 0x00,
+};
+
+STATIC unsigned short _adv_asc3550_size =
+ sizeof(_adv_asc3550_buf); /* 0x13AD */
+STATIC ADV_DCNT _adv_asc3550_chksum =
+ 0x04D52DDDUL; /* Expanded little-endian checksum. */
+
+/* Microcode buffer is kept after initialization for error recovery. */
+STATIC unsigned char _adv_asc38C0800_buf[] = {
+ 0x00, 0x00, 0x00, 0xf2, 0x00, 0xf0, 0x00, 0xfc, 0x00, 0x16, 0x18, 0xe4, 0x01, 0x00, 0x48, 0xe4,
+ 0x18, 0x80, 0x03, 0xf6, 0x02, 0x00, 0xce, 0x19, 0x00, 0xfa, 0xff, 0xff, 0x1c, 0x0f, 0x00, 0xf6,
+ 0x9e, 0xe7, 0xff, 0x00, 0x82, 0xe7, 0x00, 0xea, 0x01, 0xfa, 0x01, 0xe6, 0x09, 0xe7, 0x55, 0xf0,
+ 0x01, 0xf6, 0x03, 0x00, 0x04, 0x00, 0x10, 0x00, 0x1e, 0xf0, 0x85, 0xf0, 0x18, 0xf4, 0x08, 0x00,
+ 0xbc, 0x00, 0x38, 0x54, 0x00, 0xec, 0xd5, 0xf0, 0x82, 0x0d, 0x00, 0xe6, 0x86, 0xf0, 0xb1, 0xf0,
+ 0x98, 0x57, 0x01, 0xfc, 0xb4, 0x00, 0xd4, 0x01, 0x0c, 0x1c, 0x3e, 0x1c, 0x3c, 0x00, 0xbb, 0x00,
+ 0x00, 0x10, 0xba, 0x19, 0x02, 0x80, 0x32, 0xf0, 0x7c, 0x0d, 0x02, 0x13, 0xba, 0x13, 0x18, 0x40,
+ 0x00, 0x57, 0x01, 0xea, 0x02, 0xfc, 0x03, 0xfc, 0x3e, 0x00, 0x6c, 0x01, 0x6e, 0x01, 0x74, 0x01,
+ 0x76, 0x01, 0xb9, 0x54, 0x3e, 0x57, 0x00, 0x80, 0x03, 0xe6, 0xb6, 0x00, 0xc0, 0x00, 0x01, 0x01,
+ 0x3e, 0x01, 0x7a, 0x01, 0xca, 0x08, 0xce, 0x10, 0x16, 0x11, 0x04, 0x12, 0x08, 0x12, 0x02, 0x4a,
+ 0xbb, 0x55, 0x3c, 0x56, 0x03, 0x58, 0x1b, 0x80, 0x30, 0xe4, 0x4b, 0xe4, 0x5d, 0xf0, 0x02, 0xfa,
+ 0x20, 0x00, 0x32, 0x00, 0x40, 0x00, 0x80, 0x00, 0x24, 0x01, 0x3c, 0x01, 0x68, 0x01, 0x6a, 0x01,
+ 0x70, 0x01, 0x72, 0x01, 0x78, 0x01, 0x7c, 0x01, 0x62, 0x0a, 0x86, 0x0d, 0x06, 0x13, 0x4c, 0x1c,
+ 0x04, 0x80, 0x4a, 0xe4, 0x02, 0xee, 0x5b, 0xf0, 0x03, 0xf7, 0x0c, 0x00, 0x0f, 0x00, 0x47, 0x00,
+ 0xbe, 0x00, 0x00, 0x01, 0x20, 0x11, 0x5c, 0x16, 0x32, 0x1c, 0x38, 0x1c, 0x4e, 0x1c, 0x10, 0x44,
+ 0x00, 0x4c, 0x04, 0xea, 0x5c, 0xf0, 0xa7, 0xf0, 0x04, 0xf6, 0x03, 0xfa, 0x05, 0x00, 0x34, 0x00,
+ 0x36, 0x00, 0x98, 0x00, 0xcc, 0x00, 0x20, 0x01, 0x4e, 0x01, 0x4a, 0x0b, 0x42, 0x0c, 0x12, 0x0f,
+ 0x0c, 0x10, 0x22, 0x11, 0x0a, 0x12, 0x04, 0x13, 0x30, 0x1c, 0x02, 0x48, 0x00, 0x4e, 0x42, 0x54,
+ 0x44, 0x55, 0xbd, 0x56, 0x06, 0x83, 0x00, 0xdc, 0x05, 0xf0, 0x09, 0xf0, 0x59, 0xf0, 0xb8, 0xf0,
+ 0x4b, 0xf4, 0x06, 0xf7, 0x0e, 0xf7, 0x04, 0xfc, 0x05, 0xfc, 0x06, 0x00, 0x19, 0x00, 0x33, 0x00,
+ 0x9b, 0x00, 0xa4, 0x00, 0xb5, 0x00, 0xba, 0x00, 0xd0, 0x00, 0xe1, 0x00, 0xe7, 0x00, 0xe2, 0x03,
+ 0x08, 0x0f, 0x02, 0x10, 0x04, 0x10, 0x0a, 0x10, 0x0a, 0x13, 0x0c, 0x13, 0x12, 0x13, 0x24, 0x14,
+ 0x34, 0x14, 0x04, 0x16, 0x08, 0x16, 0xa4, 0x17, 0x20, 0x1c, 0x34, 0x1c, 0x36, 0x1c, 0x08, 0x44,
+ 0x38, 0x44, 0x91, 0x44, 0x0a, 0x45, 0x48, 0x46, 0x01, 0x48, 0x68, 0x54, 0x3a, 0x55, 0x83, 0x55,
+ 0xe5, 0x55, 0xb0, 0x57, 0x01, 0x58, 0x83, 0x59, 0x05, 0xe6, 0x0b, 0xf0, 0x0c, 0xf0, 0x04, 0xf8,
+ 0x05, 0xf8, 0x07, 0x00, 0x0a, 0x00, 0x1c, 0x00, 0x1e, 0x00, 0x9e, 0x00, 0xa8, 0x00, 0xaa, 0x00,
+ 0xb9, 0x00, 0xe0, 0x00, 0x22, 0x01, 0x26, 0x01, 0x79, 0x01, 0x7e, 0x01, 0xc4, 0x01, 0xc6, 0x01,
+ 0x80, 0x02, 0x5e, 0x03, 0xee, 0x04, 0x9a, 0x06, 0xf8, 0x07, 0x62, 0x08, 0x68, 0x08, 0x69, 0x08,
+ 0xd6, 0x08, 0xe9, 0x09, 0xfa, 0x0b, 0x2e, 0x0f, 0x12, 0x10, 0x1a, 0x10, 0xed, 0x10, 0xf1, 0x10,
+ 0x2a, 0x11, 0x06, 0x12, 0x0c, 0x12, 0x3e, 0x12, 0x10, 0x13, 0x16, 0x13, 0x1e, 0x13, 0x46, 0x14,
+ 0x76, 0x14, 0x82, 0x14, 0x36, 0x15, 0xca, 0x15, 0x6b, 0x18, 0xbe, 0x18, 0xca, 0x18, 0xe6, 0x19,
+ 0x12, 0x1c, 0x46, 0x1c, 0x9c, 0x32, 0x00, 0x40, 0x0e, 0x47, 0xfe, 0x9c, 0xf0, 0x2b, 0x02, 0xfe,
+ 0xac, 0x0d, 0xff, 0x10, 0x00, 0x00, 0xd7, 0xfe, 0xe8, 0x19, 0x00, 0xd6, 0xfe, 0x84, 0x01, 0xff,
+ 0x03, 0x00, 0x00, 0xfe, 0x93, 0x15, 0xfe, 0x0f, 0x05, 0xff, 0x38, 0x00, 0x00, 0xfe, 0x57, 0x24,
+ 0x00, 0xfe, 0x4c, 0x00, 0x5b, 0xff, 0x04, 0x00, 0x00, 0x11, 0xff, 0x09, 0x00, 0x00, 0xff, 0x08,
+ 0x01, 0x01, 0xff, 0x08, 0xff, 0xff, 0xff, 0x27, 0x00, 0x00, 0xff, 0x10, 0xff, 0xff, 0xff, 0x11,
+ 0x00, 0x00, 0xfe, 0x78, 0x56, 0xfe, 0x34, 0x12, 0xff, 0x21, 0x00, 0x00, 0xfe, 0x04, 0xf7, 0xd6,
+ 0x2c, 0x99, 0x0a, 0x01, 0xfe, 0xc2, 0x0f, 0xfe, 0x04, 0xf7, 0xd6, 0x99, 0x0a, 0x42, 0x2c, 0xfe,
+ 0x3d, 0xf0, 0xfe, 0x06, 0x02, 0xfe, 0x20, 0xf0, 0xa7, 0xfe, 0x91, 0xf0, 0xfe, 0xf4, 0x01, 0xfe,
+ 0x90, 0xf0, 0xfe, 0xf4, 0x01, 0xfe, 0x8f, 0xf0, 0xa7, 0x03, 0x5d, 0x4d, 0x02, 0xfe, 0xc8, 0x0d,
+ 0x01, 0xfe, 0x38, 0x0e, 0xfe, 0xdd, 0x12, 0xfe, 0xfc, 0x10, 0xfe, 0x28, 0x1c, 0x03, 0xfe, 0xa6,
+ 0x00, 0xfe, 0xd3, 0x12, 0x41, 0x14, 0xfe, 0xa6, 0x00, 0xc2, 0xfe, 0x48, 0xf0, 0xfe, 0x8a, 0x02,
+ 0xfe, 0x49, 0xf0, 0xfe, 0xa4, 0x02, 0xfe, 0x4a, 0xf0, 0xfe, 0xc2, 0x02, 0xfe, 0x46, 0xf0, 0xfe,
+ 0x54, 0x02, 0xfe, 0x47, 0xf0, 0xfe, 0x5a, 0x02, 0xfe, 0x43, 0xf0, 0xfe, 0x48, 0x02, 0xfe, 0x44,
+ 0xf0, 0xfe, 0x4c, 0x02, 0xfe, 0x45, 0xf0, 0xfe, 0x50, 0x02, 0x18, 0x0a, 0xaa, 0x18, 0x06, 0x14,
+ 0xa1, 0x02, 0x2b, 0xfe, 0x00, 0x1c, 0xe7, 0xfe, 0x02, 0x1c, 0xe6, 0xfe, 0x1e, 0x1c, 0xfe, 0xe9,
+ 0x10, 0x01, 0xfe, 0x18, 0x18, 0xfe, 0xe7, 0x10, 0xfe, 0x06, 0xfc, 0xce, 0x09, 0x70, 0x01, 0xa8,
+ 0x02, 0x2b, 0x15, 0x59, 0x39, 0xa2, 0x01, 0xfe, 0x58, 0x10, 0x09, 0x70, 0x01, 0x87, 0xfe, 0xbd,
+ 0x10, 0x09, 0x70, 0x01, 0x87, 0xfe, 0xad, 0x10, 0xfe, 0x16, 0x1c, 0xfe, 0x58, 0x1c, 0x18, 0x06,
+ 0x14, 0xa1, 0x2c, 0x1c, 0x2b, 0xfe, 0x3d, 0xf0, 0xfe, 0x06, 0x02, 0x23, 0xfe, 0x98, 0x02, 0xfe,
+ 0x5a, 0x1c, 0xf8, 0xfe, 0x14, 0x1c, 0x15, 0xfe, 0x30, 0x00, 0x39, 0xa2, 0x01, 0xfe, 0x48, 0x10,
+ 0x18, 0x06, 0x14, 0xa1, 0x02, 0xd7, 0x22, 0x20, 0x07, 0x11, 0x35, 0xfe, 0x69, 0x10, 0x18, 0x06,
+ 0x14, 0xa1, 0xfe, 0x04, 0xec, 0x20, 0x4f, 0x43, 0x13, 0x20, 0xfe, 0x05, 0xf6, 0xce, 0x01, 0xfe,
+ 0x4a, 0x17, 0x08, 0x54, 0x58, 0x37, 0x12, 0x2f, 0x42, 0x92, 0x01, 0xfe, 0x82, 0x16, 0x02, 0x2b,
+ 0x09, 0x46, 0x01, 0x0e, 0x07, 0x00, 0x66, 0x01, 0x73, 0xfe, 0x18, 0x10, 0xfe, 0x41, 0x58, 0x09,
+ 0xa4, 0x01, 0x0e, 0xfe, 0xc8, 0x54, 0x6b, 0xfe, 0x10, 0x03, 0x01, 0xfe, 0x82, 0x16, 0x02, 0x2b,
+ 0x2c, 0x4f, 0xfe, 0x02, 0xe8, 0x2a, 0xfe, 0xbf, 0x57, 0xfe, 0x9e, 0x43, 0xfe, 0x77, 0x57, 0xfe,
+ 0x27, 0xf0, 0xfe, 0xe0, 0x01, 0xfe, 0x07, 0x4b, 0xfe, 0x20, 0xf0, 0xa7, 0xfe, 0x40, 0x1c, 0x1c,
+ 0xd9, 0xfe, 0x26, 0xf0, 0xfe, 0x5a, 0x03, 0xfe, 0xa0, 0xf0, 0xfe, 0x48, 0x03, 0xfe, 0x11, 0xf0,
+ 0xa7, 0xfe, 0xef, 0x10, 0xfe, 0x9f, 0xf0, 0xfe, 0x68, 0x03, 0xf9, 0x10, 0xfe, 0x11, 0x00, 0x02,
+ 0x65, 0x2c, 0xfe, 0x48, 0x1c, 0xf9, 0x08, 0x05, 0x1b, 0xfe, 0x18, 0x13, 0x21, 0x22, 0xa3, 0xb7,
+ 0x13, 0xa3, 0x09, 0x46, 0x01, 0x0e, 0xb7, 0x78, 0x01, 0xfe, 0xb4, 0x16, 0x12, 0xd1, 0x1c, 0xd9,
+ 0xfe, 0x01, 0xf0, 0xd9, 0xfe, 0x82, 0xf0, 0xfe, 0x96, 0x03, 0xfa, 0x12, 0xfe, 0xe4, 0x00, 0x27,
+ 0xfe, 0xa8, 0x03, 0x1c, 0x34, 0x1d, 0xfe, 0xb8, 0x03, 0x01, 0x4b, 0xfe, 0x06, 0xf0, 0xfe, 0xc8,
+ 0x03, 0x95, 0x86, 0xfe, 0x0a, 0xf0, 0xfe, 0x8a, 0x06, 0x02, 0x24, 0x03, 0x70, 0x28, 0x17, 0xfe,
+ 0xfa, 0x04, 0x15, 0x6d, 0x01, 0x36, 0x7b, 0xfe, 0x6a, 0x02, 0x02, 0xd8, 0xf9, 0x2c, 0x99, 0x19,
+ 0xfe, 0x67, 0x1b, 0xfe, 0xbf, 0x57, 0xfe, 0x77, 0x57, 0xfe, 0x48, 0x1c, 0x74, 0x01, 0xaf, 0x8c,
+ 0x09, 0x46, 0x01, 0x0e, 0x07, 0x00, 0x17, 0xda, 0x09, 0xd1, 0x01, 0x0e, 0x8d, 0x51, 0x64, 0x79,
+ 0x2a, 0x03, 0x70, 0x28, 0xfe, 0x10, 0x12, 0x15, 0x6d, 0x01, 0x36, 0x7b, 0xfe, 0x6a, 0x02, 0x02,
+ 0xd8, 0xc7, 0x81, 0xc8, 0x83, 0x1c, 0x24, 0x27, 0xfe, 0x40, 0x04, 0x1d, 0xfe, 0x3c, 0x04, 0x3b,
+ 0xfe, 0xa0, 0x00, 0xfe, 0x9b, 0x57, 0xfe, 0x4e, 0x12, 0x2d, 0xff, 0x02, 0x00, 0x10, 0x01, 0x0b,
+ 0x1d, 0xfe, 0xe4, 0x04, 0x2d, 0x01, 0x0b, 0x1d, 0x24, 0x33, 0x31, 0xde, 0xfe, 0x4c, 0x44, 0xfe,
+ 0x4c, 0x12, 0x51, 0xfe, 0x44, 0x48, 0x0f, 0x6f, 0xfe, 0x4c, 0x54, 0x6b, 0xda, 0x4f, 0x79, 0x2a,
+ 0xfe, 0x06, 0x80, 0xfe, 0x48, 0x47, 0xfe, 0x62, 0x13, 0x08, 0x05, 0x1b, 0xfe, 0x2a, 0x13, 0x32,
+ 0x07, 0x82, 0xfe, 0x52, 0x13, 0xfe, 0x20, 0x10, 0x0f, 0x6f, 0xfe, 0x4c, 0x54, 0x6b, 0xda, 0xfe,
+ 0x06, 0x80, 0xfe, 0x48, 0x47, 0xfe, 0x40, 0x13, 0x08, 0x05, 0x1b, 0xfe, 0x08, 0x13, 0x32, 0x07,
+ 0x82, 0xfe, 0x30, 0x13, 0x08, 0x05, 0x1b, 0xfe, 0x1c, 0x12, 0x15, 0x9d, 0x08, 0x05, 0x06, 0x4d,
+ 0x15, 0xfe, 0x0d, 0x00, 0x01, 0x36, 0x7b, 0xfe, 0x64, 0x0d, 0x02, 0x24, 0x2d, 0x12, 0xfe, 0xe6,
+ 0x00, 0xfe, 0x1c, 0x90, 0xfe, 0x40, 0x5c, 0x04, 0x15, 0x9d, 0x01, 0x36, 0x02, 0x2b, 0xfe, 0x42,
+ 0x5b, 0x99, 0x19, 0xfe, 0x46, 0x59, 0xfe, 0xbf, 0x57, 0xfe, 0x77, 0x57, 0xfe, 0x87, 0x80, 0xfe,
+ 0x31, 0xe4, 0x5b, 0x08, 0x05, 0x0a, 0xfe, 0x84, 0x13, 0xfe, 0x20, 0x80, 0x07, 0x19, 0xfe, 0x7c,
+ 0x12, 0x53, 0x05, 0x06, 0xfe, 0x6c, 0x13, 0x03, 0xfe, 0xa2, 0x00, 0x28, 0x17, 0xfe, 0x90, 0x05,
+ 0xfe, 0x31, 0xe4, 0x5a, 0x53, 0x05, 0x0a, 0xfe, 0x56, 0x13, 0x03, 0xfe, 0xa0, 0x00, 0x28, 0xfe,
+ 0x4e, 0x12, 0x67, 0xff, 0x02, 0x00, 0x10, 0x27, 0xfe, 0x48, 0x05, 0x1c, 0x34, 0xfe, 0x89, 0x48,
+ 0xff, 0x02, 0x00, 0x10, 0x27, 0xfe, 0x56, 0x05, 0x26, 0xfe, 0xa8, 0x05, 0x12, 0xfe, 0xe3, 0x00,
+ 0x21, 0x53, 0xfe, 0x4a, 0xf0, 0xfe, 0x76, 0x05, 0xfe, 0x49, 0xf0, 0xfe, 0x70, 0x05, 0x88, 0x25,
+ 0xfe, 0x21, 0x00, 0xab, 0x25, 0xfe, 0x22, 0x00, 0xaa, 0x25, 0x58, 0xfe, 0x09, 0x48, 0xff, 0x02,
+ 0x00, 0x10, 0x27, 0xfe, 0x86, 0x05, 0x26, 0xfe, 0xa8, 0x05, 0xfe, 0xe2, 0x08, 0x53, 0x05, 0xcb,
+ 0x4d, 0x01, 0xb0, 0x25, 0x06, 0x13, 0xd3, 0x39, 0xfe, 0x27, 0x01, 0x08, 0x05, 0x1b, 0xfe, 0x22,
+ 0x12, 0x41, 0x01, 0xb2, 0x15, 0x9d, 0x08, 0x05, 0x06, 0x4d, 0x15, 0xfe, 0x0d, 0x00, 0x01, 0x36,
+ 0x7b, 0xfe, 0x64, 0x0d, 0x02, 0x24, 0x03, 0xfe, 0x9c, 0x00, 0x28, 0xeb, 0x03, 0x5c, 0x28, 0xfe,
+ 0x36, 0x13, 0x41, 0x01, 0xb2, 0x26, 0xfe, 0x18, 0x06, 0x09, 0x06, 0x53, 0x05, 0x1f, 0xfe, 0x02,
+ 0x12, 0x50, 0x01, 0xfe, 0x9e, 0x15, 0x1d, 0xfe, 0x0e, 0x06, 0x12, 0xa5, 0x01, 0x4b, 0x12, 0xfe,
+ 0xe5, 0x00, 0x03, 0x5c, 0xc1, 0x0c, 0x5c, 0x03, 0xcd, 0x28, 0xfe, 0x62, 0x12, 0x03, 0x45, 0x28,
+ 0xfe, 0x5a, 0x13, 0x01, 0xfe, 0x0c, 0x19, 0x01, 0xfe, 0x76, 0x19, 0xfe, 0x43, 0x48, 0xc4, 0xcc,
+ 0x0f, 0x71, 0xff, 0x02, 0x00, 0x57, 0x52, 0x93, 0x1e, 0x43, 0x8b, 0xc4, 0x6e, 0x41, 0x01, 0xb2,
+ 0x26, 0xfe, 0x82, 0x06, 0x53, 0x05, 0x1a, 0xe9, 0x91, 0x09, 0x59, 0x01, 0xfe, 0xcc, 0x15, 0x1d,
+ 0xfe, 0x78, 0x06, 0x12, 0xa5, 0x01, 0x4b, 0x12, 0xfe, 0xe5, 0x00, 0x03, 0x45, 0xc1, 0x0c, 0x45,
+ 0x18, 0x06, 0x01, 0xb2, 0xfa, 0x76, 0x74, 0x01, 0xaf, 0x8c, 0x12, 0xfe, 0xe2, 0x00, 0x27, 0xdb,
+ 0x1c, 0x34, 0xfe, 0x0a, 0xf0, 0xfe, 0xb6, 0x06, 0x94, 0xfe, 0x6c, 0x07, 0xfe, 0x06, 0xf0, 0xfe,
+ 0x74, 0x07, 0x95, 0x86, 0x02, 0x24, 0x08, 0x05, 0x0a, 0xfe, 0x2e, 0x12, 0x16, 0x19, 0x01, 0x0b,
+ 0x16, 0x00, 0x01, 0x0b, 0x16, 0x00, 0x01, 0x0b, 0x16, 0x00, 0x01, 0x0b, 0xfe, 0x99, 0xa4, 0x01,
+ 0x0b, 0x16, 0x00, 0x02, 0xfe, 0x42, 0x08, 0x68, 0x05, 0x1a, 0xfe, 0x38, 0x12, 0x08, 0x05, 0x1a,
+ 0xfe, 0x30, 0x13, 0x16, 0xfe, 0x1b, 0x00, 0x01, 0x0b, 0x16, 0x00, 0x01, 0x0b, 0x16, 0x00, 0x01,
+ 0x0b, 0x16, 0x00, 0x01, 0x0b, 0x16, 0x06, 0x01, 0x0b, 0x16, 0x00, 0x02, 0xe2, 0x6c, 0x58, 0xbe,
+ 0x50, 0xfe, 0x9a, 0x81, 0x55, 0x1b, 0x7a, 0xfe, 0x42, 0x07, 0x09, 0x1b, 0xfe, 0x09, 0x6f, 0xba,
+ 0xfe, 0xca, 0x45, 0xfe, 0x32, 0x12, 0x69, 0x6d, 0x8b, 0x6c, 0x7f, 0x27, 0xfe, 0x54, 0x07, 0x1c,
+ 0x34, 0xfe, 0x0a, 0xf0, 0xfe, 0x42, 0x07, 0x95, 0x86, 0x94, 0xfe, 0x6c, 0x07, 0x02, 0x24, 0x01,
+ 0x4b, 0x02, 0xdb, 0x16, 0x1f, 0x02, 0xdb, 0xfe, 0x9c, 0xf7, 0xdc, 0xfe, 0x2c, 0x90, 0xfe, 0xae,
+ 0x90, 0x56, 0xfe, 0xda, 0x07, 0x0c, 0x60, 0x14, 0x61, 0x08, 0x54, 0x5a, 0x37, 0x22, 0x20, 0x07,
+ 0x11, 0xfe, 0x0e, 0x12, 0x8d, 0xfe, 0x80, 0x80, 0x39, 0x20, 0x6a, 0x2a, 0xfe, 0x06, 0x10, 0xfe,
+ 0x83, 0xe7, 0xfe, 0x48, 0x00, 0xab, 0xfe, 0x03, 0x40, 0x08, 0x54, 0x5b, 0x37, 0x01, 0xb3, 0xb8,
+ 0xfe, 0x1f, 0x40, 0x13, 0x62, 0x01, 0xef, 0xfe, 0x08, 0x50, 0xfe, 0x8a, 0x50, 0xfe, 0x44, 0x51,
+ 0xfe, 0xc6, 0x51, 0x88, 0xfe, 0x08, 0x90, 0xfe, 0x8a, 0x90, 0x0c, 0x5e, 0x14, 0x5f, 0xfe, 0x0c,
+ 0x90, 0xfe, 0x8e, 0x90, 0xfe, 0x40, 0x50, 0xfe, 0xc2, 0x50, 0x0c, 0x3d, 0x14, 0x3e, 0xfe, 0x4a,
+ 0x10, 0x08, 0x05, 0x5a, 0xfe, 0x2a, 0x12, 0xfe, 0x2c, 0x90, 0xfe, 0xae, 0x90, 0x0c, 0x60, 0x14,
+ 0x61, 0x08, 0x05, 0x5b, 0x8b, 0x01, 0xb3, 0xfe, 0x1f, 0x80, 0x13, 0x62, 0xfe, 0x44, 0x90, 0xfe,
+ 0xc6, 0x90, 0x0c, 0x3f, 0x14, 0x40, 0xfe, 0x08, 0x90, 0xfe, 0x8a, 0x90, 0x0c, 0x5e, 0x14, 0x5f,
+ 0xfe, 0x40, 0x90, 0xfe, 0xc2, 0x90, 0x0c, 0x3d, 0x14, 0x3e, 0x0c, 0x2e, 0x14, 0x3c, 0x21, 0x0c,
+ 0x49, 0x0c, 0x63, 0x08, 0x54, 0x1f, 0x37, 0x2c, 0x0f, 0xfe, 0x4e, 0x11, 0x27, 0xdd, 0xfe, 0x9e,
+ 0xf0, 0xfe, 0x76, 0x08, 0xbc, 0x17, 0x34, 0x2c, 0x77, 0xe6, 0xc5, 0xfe, 0x9a, 0x08, 0xc6, 0xfe,
+ 0xb8, 0x08, 0x94, 0xfe, 0x8e, 0x08, 0xfe, 0x06, 0xf0, 0xfe, 0x94, 0x08, 0x95, 0x86, 0x02, 0x24,
+ 0x01, 0x4b, 0xfe, 0xc9, 0x10, 0x16, 0x1f, 0xfe, 0xc9, 0x10, 0x68, 0x05, 0x06, 0xfe, 0x10, 0x12,
+ 0x68, 0x05, 0x0a, 0x4e, 0x08, 0x05, 0x0a, 0xfe, 0x90, 0x12, 0xfe, 0x2e, 0x1c, 0x02, 0xfe, 0x18,
+ 0x0b, 0x68, 0x05, 0x06, 0x4e, 0x68, 0x05, 0x0a, 0xfe, 0x7a, 0x12, 0xfe, 0x2c, 0x1c, 0xfe, 0xaa,
+ 0xf0, 0xfe, 0xd2, 0x09, 0xfe, 0xac, 0xf0, 0xfe, 0x00, 0x09, 0x02, 0xfe, 0xde, 0x09, 0xfe, 0xb7,
+ 0xf0, 0xfe, 0xfc, 0x08, 0xfe, 0x02, 0xf6, 0x1a, 0x50, 0xfe, 0x70, 0x18, 0xfe, 0xf1, 0x18, 0xfe,
+ 0x40, 0x55, 0xfe, 0xe1, 0x55, 0xfe, 0x10, 0x58, 0xfe, 0x91, 0x58, 0xfe, 0x14, 0x59, 0xfe, 0x95,
+ 0x59, 0x1c, 0x85, 0xfe, 0x8c, 0xf0, 0xfe, 0xfc, 0x08, 0xfe, 0xac, 0xf0, 0xfe, 0xf0, 0x08, 0xb5,
+ 0xfe, 0xcb, 0x10, 0xfe, 0xad, 0xf0, 0xfe, 0x0c, 0x09, 0x02, 0xfe, 0x18, 0x0b, 0xb6, 0xfe, 0xbf,
+ 0x10, 0xfe, 0x2b, 0xf0, 0x85, 0xf4, 0x1e, 0xfe, 0x00, 0xfe, 0xfe, 0x1c, 0x12, 0xc2, 0xfe, 0xd2,
+ 0xf0, 0x85, 0xfe, 0x76, 0x18, 0x1e, 0x19, 0x17, 0x85, 0x03, 0xd2, 0x1e, 0x06, 0x17, 0x85, 0xc5,
+ 0x4a, 0xc6, 0x4a, 0xb5, 0xb6, 0xfe, 0x89, 0x10, 0x74, 0x67, 0x2d, 0x15, 0x9d, 0x01, 0x36, 0x10,
+ 0xfe, 0x35, 0x00, 0xfe, 0x01, 0xf0, 0x65, 0x10, 0x80, 0x02, 0x65, 0xfe, 0x98, 0x80, 0xfe, 0x19,
+ 0xe4, 0x0a, 0xfe, 0x1a, 0x12, 0x51, 0xfe, 0x19, 0x82, 0xfe, 0x6c, 0x18, 0xfe, 0x44, 0x54, 0xbe,
+ 0xfe, 0x19, 0x81, 0xfe, 0x74, 0x18, 0x8f, 0x90, 0x17, 0xfe, 0xce, 0x08, 0x02, 0x4a, 0x08, 0x05,
+ 0x5a, 0xec, 0x03, 0x2e, 0x29, 0x3c, 0x0c, 0x3f, 0x14, 0x40, 0x9b, 0x2e, 0x9c, 0x3c, 0xfe, 0x6c,
+ 0x18, 0xfe, 0xed, 0x18, 0xfe, 0x44, 0x54, 0xfe, 0xe5, 0x54, 0x3a, 0x3f, 0x3b, 0x40, 0x03, 0x49,
+ 0x29, 0x63, 0x8f, 0xfe, 0xe3, 0x54, 0xfe, 0x74, 0x18, 0xfe, 0xf5, 0x18, 0x8f, 0xfe, 0xe3, 0x54,
+ 0x90, 0xc0, 0x56, 0xfe, 0xce, 0x08, 0x02, 0x4a, 0xfe, 0x37, 0xf0, 0xfe, 0xda, 0x09, 0xfe, 0x8b,
+ 0xf0, 0xfe, 0x60, 0x09, 0x02, 0x4a, 0x08, 0x05, 0x0a, 0x23, 0xfe, 0xfa, 0x0a, 0x3a, 0x49, 0x3b,
+ 0x63, 0x56, 0xfe, 0x3e, 0x0a, 0x0f, 0xfe, 0xc0, 0x07, 0x41, 0x98, 0x00, 0xad, 0xfe, 0x01, 0x59,
+ 0xfe, 0x52, 0xf0, 0xfe, 0x0c, 0x0a, 0x8f, 0x7a, 0xfe, 0x24, 0x0a, 0x3a, 0x49, 0x8f, 0xfe, 0xe3,
+ 0x54, 0x57, 0x49, 0x7d, 0x63, 0xfe, 0x14, 0x58, 0xfe, 0x95, 0x58, 0x02, 0x4a, 0x3a, 0x49, 0x3b,
+ 0x63, 0xfe, 0x14, 0x59, 0xfe, 0x95, 0x59, 0xbe, 0x57, 0x49, 0x57, 0x63, 0x02, 0x4a, 0x08, 0x05,
+ 0x5a, 0xfe, 0x82, 0x12, 0x08, 0x05, 0x1f, 0xfe, 0x66, 0x13, 0x22, 0x62, 0xb7, 0xfe, 0x03, 0xa1,
+ 0xfe, 0x83, 0x80, 0xfe, 0xc8, 0x44, 0xfe, 0x2e, 0x13, 0xfe, 0x04, 0x91, 0xfe, 0x86, 0x91, 0x6a,
+ 0x2a, 0xfe, 0x40, 0x59, 0xfe, 0xc1, 0x59, 0x56, 0xe0, 0x03, 0x60, 0x29, 0x61, 0x0c, 0x7f, 0x14,
+ 0x80, 0x57, 0x60, 0x7d, 0x61, 0x01, 0xb3, 0xb8, 0x6a, 0x2a, 0x13, 0x62, 0x9b, 0x2e, 0x9c, 0x3c,
+ 0x3a, 0x3f, 0x3b, 0x40, 0x90, 0xc0, 0xfe, 0x04, 0xfa, 0x2e, 0xfe, 0x05, 0xfa, 0x3c, 0x01, 0xef,
+ 0xfe, 0x36, 0x10, 0x21, 0x0c, 0x7f, 0x0c, 0x80, 0x3a, 0x3f, 0x3b, 0x40, 0xe4, 0x08, 0x05, 0x1f,
+ 0x17, 0xe0, 0x3a, 0x3d, 0x3b, 0x3e, 0x08, 0x05, 0xfe, 0xf7, 0x00, 0x37, 0x03, 0x5e, 0x29, 0x5f,
+ 0xfe, 0x10, 0x58, 0xfe, 0x91, 0x58, 0x57, 0x49, 0x7d, 0x63, 0x02, 0xfe, 0xf4, 0x09, 0x08, 0x05,
+ 0x1f, 0x17, 0xe0, 0x08, 0x05, 0xfe, 0xf7, 0x00, 0x37, 0xbe, 0xfe, 0x19, 0x81, 0x50, 0xfe, 0x10,
+ 0x90, 0xfe, 0x92, 0x90, 0xfe, 0xd3, 0x10, 0x32, 0x07, 0xa6, 0x17, 0xfe, 0x08, 0x09, 0x12, 0xa6,
+ 0x08, 0x05, 0x0a, 0xfe, 0x14, 0x13, 0x03, 0x3d, 0x29, 0x3e, 0x56, 0xfe, 0x08, 0x09, 0xfe, 0x0c,
+ 0x58, 0xfe, 0x8d, 0x58, 0x02, 0x4a, 0x21, 0x41, 0xfe, 0x19, 0x80, 0xe7, 0x08, 0x05, 0x0a, 0xfe,
+ 0x1a, 0x12, 0xfe, 0x6c, 0x19, 0xfe, 0x19, 0x41, 0xf4, 0xc2, 0xfe, 0xd1, 0xf0, 0xe2, 0x15, 0x7e,
+ 0x01, 0x36, 0x10, 0xfe, 0x44, 0x00, 0xfe, 0x8e, 0x10, 0xfe, 0x6c, 0x19, 0x57, 0x3d, 0xfe, 0xed,
+ 0x19, 0x7d, 0x3e, 0xfe, 0x0c, 0x51, 0xfe, 0x8e, 0x51, 0xf4, 0x1e, 0xfe, 0x00, 0xff, 0x35, 0xfe,
+ 0x74, 0x10, 0xc2, 0xfe, 0xd2, 0xf0, 0xfe, 0xa6, 0x0b, 0xfe, 0x76, 0x18, 0x1e, 0x19, 0x8a, 0x03,
+ 0xd2, 0x1e, 0x06, 0xfe, 0x08, 0x13, 0x10, 0xfe, 0x16, 0x00, 0x02, 0x65, 0xfe, 0xd1, 0xf0, 0xfe,
+ 0xb8, 0x0b, 0x15, 0x7e, 0x01, 0x36, 0x10, 0xfe, 0x17, 0x00, 0xfe, 0x42, 0x10, 0xfe, 0xce, 0xf0,
+ 0xfe, 0xbe, 0x0b, 0xfe, 0x3c, 0x10, 0xfe, 0xcd, 0xf0, 0xfe, 0xca, 0x0b, 0x10, 0xfe, 0x22, 0x00,
+ 0x02, 0x65, 0xfe, 0xcb, 0xf0, 0xfe, 0xd6, 0x0b, 0x10, 0xfe, 0x24, 0x00, 0x02, 0x65, 0xfe, 0xd0,
+ 0xf0, 0xfe, 0xe0, 0x0b, 0x10, 0x9e, 0xe5, 0xfe, 0xcf, 0xf0, 0xfe, 0xea, 0x0b, 0x10, 0x58, 0xfe,
+ 0x10, 0x10, 0xfe, 0xcc, 0xf0, 0xe2, 0x68, 0x05, 0x1f, 0x4d, 0x10, 0xfe, 0x12, 0x00, 0x2c, 0x0f,
+ 0xfe, 0x4e, 0x11, 0x27, 0xfe, 0x00, 0x0c, 0xfe, 0x9e, 0xf0, 0xfe, 0x14, 0x0c, 0xbc, 0x17, 0x34,
+ 0x2c, 0x77, 0xe6, 0xc5, 0x24, 0xc6, 0x24, 0x2c, 0xfa, 0x27, 0xfe, 0x20, 0x0c, 0x1c, 0x34, 0x94,
+ 0xfe, 0x3c, 0x0c, 0x95, 0x86, 0xc5, 0xdc, 0xc6, 0xdc, 0x02, 0x24, 0x01, 0x4b, 0xfe, 0xdb, 0x10,
+ 0x12, 0xfe, 0xe8, 0x00, 0xb5, 0xb6, 0x74, 0xc7, 0x81, 0xc8, 0x83, 0xfe, 0x89, 0xf0, 0x24, 0x33,
+ 0x31, 0xe1, 0xc7, 0x81, 0xc8, 0x83, 0x27, 0xfe, 0x66, 0x0c, 0x1d, 0x24, 0x33, 0x31, 0xdf, 0xbc,
+ 0x4e, 0x10, 0xfe, 0x42, 0x00, 0x02, 0x65, 0x7c, 0x06, 0xfe, 0x81, 0x49, 0x17, 0xfe, 0x2c, 0x0d,
+ 0x08, 0x05, 0x0a, 0xfe, 0x44, 0x13, 0x10, 0x00, 0x55, 0x0a, 0xfe, 0x54, 0x12, 0x55, 0xfe, 0x28,
+ 0x00, 0x23, 0xfe, 0x9a, 0x0d, 0x09, 0x46, 0x01, 0x0e, 0x07, 0x00, 0x66, 0x44, 0xfe, 0x28, 0x00,
+ 0xfe, 0xe2, 0x10, 0x01, 0xf5, 0x01, 0xf6, 0x09, 0xa4, 0x01, 0xfe, 0x26, 0x0f, 0x64, 0x12, 0x2f,
+ 0x01, 0x73, 0x02, 0x2b, 0x10, 0xfe, 0x44, 0x00, 0x55, 0x0a, 0xe9, 0x44, 0x0a, 0xfe, 0xb4, 0x10,
+ 0x01, 0xb0, 0x44, 0x0a, 0xfe, 0xaa, 0x10, 0x01, 0xb0, 0xfe, 0x19, 0x82, 0xfe, 0x34, 0x46, 0xac,
+ 0x44, 0x0a, 0x10, 0xfe, 0x43, 0x00, 0xfe, 0x96, 0x10, 0x08, 0x54, 0x0a, 0x37, 0x01, 0xf5, 0x01,
+ 0xf6, 0x64, 0x12, 0x2f, 0x01, 0x73, 0x99, 0x0a, 0x64, 0x42, 0x92, 0x02, 0xfe, 0x2e, 0x03, 0x08,
+ 0x05, 0x0a, 0x8a, 0x44, 0x0a, 0x10, 0x00, 0xfe, 0x5c, 0x10, 0x68, 0x05, 0x1a, 0xfe, 0x58, 0x12,
+ 0x08, 0x05, 0x1a, 0xfe, 0x50, 0x13, 0xfe, 0x1c, 0x1c, 0xfe, 0x9d, 0xf0, 0xfe, 0x50, 0x0d, 0xfe,
+ 0x1c, 0x1c, 0xfe, 0x9d, 0xf0, 0xfe, 0x56, 0x0d, 0x08, 0x54, 0x1a, 0x37, 0xfe, 0xa9, 0x10, 0x10,
+ 0xfe, 0x15, 0x00, 0xfe, 0x04, 0xe6, 0x0a, 0x50, 0xfe, 0x2e, 0x10, 0x10, 0xfe, 0x13, 0x00, 0xfe,
+ 0x10, 0x10, 0x10, 0x6f, 0xab, 0x10, 0xfe, 0x41, 0x00, 0xaa, 0x10, 0xfe, 0x24, 0x00, 0x8c, 0xb5,
+ 0xb6, 0x74, 0x03, 0x70, 0x28, 0x23, 0xd8, 0x50, 0xfe, 0x04, 0xe6, 0x1a, 0xfe, 0x9d, 0x41, 0xfe,
+ 0x1c, 0x42, 0x64, 0x01, 0xe3, 0x02, 0x2b, 0xf8, 0x15, 0x0a, 0x39, 0xa0, 0xb4, 0x15, 0xfe, 0x31,
+ 0x00, 0x39, 0xa2, 0x01, 0xfe, 0x48, 0x10, 0x02, 0xd7, 0x42, 0xfe, 0x06, 0xec, 0xd0, 0xfc, 0x44,
+ 0x1b, 0xfe, 0xce, 0x45, 0x35, 0x42, 0xfe, 0x06, 0xea, 0xd0, 0xfe, 0x47, 0x4b, 0x91, 0xfe, 0x75,
+ 0x57, 0x03, 0x5d, 0xfe, 0x98, 0x56, 0xfe, 0x38, 0x12, 0x09, 0x48, 0x01, 0x0e, 0xfe, 0x44, 0x48,
+ 0x4f, 0x08, 0x05, 0x1b, 0xfe, 0x1a, 0x13, 0x09, 0x46, 0x01, 0x0e, 0x41, 0xfe, 0x41, 0x58, 0x09,
+ 0xa4, 0x01, 0x0e, 0xfe, 0x49, 0x54, 0x96, 0xfe, 0x1e, 0x0e, 0x02, 0xfe, 0x2e, 0x03, 0x09, 0x5d,
+ 0xfe, 0xee, 0x14, 0xfc, 0x44, 0x1b, 0xfe, 0xce, 0x45, 0x35, 0x42, 0xfe, 0xce, 0x47, 0xfe, 0xad,
+ 0x13, 0x02, 0x2b, 0x22, 0x20, 0x07, 0x11, 0xfe, 0x9e, 0x12, 0x21, 0x13, 0x59, 0x13, 0x9f, 0x13,
+ 0xd5, 0x22, 0x2f, 0x41, 0x39, 0x2f, 0xbc, 0xad, 0xfe, 0xbc, 0xf0, 0xfe, 0xe0, 0x0e, 0x0f, 0x06,
+ 0x13, 0x59, 0x01, 0xfe, 0xda, 0x16, 0x03, 0xfe, 0x38, 0x01, 0x29, 0xfe, 0x3a, 0x01, 0x56, 0xfe,
+ 0xe4, 0x0e, 0xfe, 0x02, 0xec, 0xd5, 0x69, 0x00, 0x66, 0xfe, 0x04, 0xec, 0x20, 0x4f, 0xfe, 0x05,
+ 0xf6, 0xfe, 0x34, 0x01, 0x01, 0xfe, 0x4a, 0x17, 0xfe, 0x08, 0x90, 0xfe, 0x48, 0xf4, 0x0d, 0xfe,
+ 0x18, 0x13, 0xba, 0xfe, 0x02, 0xea, 0xd5, 0x69, 0x7e, 0xfe, 0xc5, 0x13, 0x15, 0x1a, 0x39, 0xa0,
+ 0xb4, 0xfe, 0x2e, 0x10, 0x03, 0xfe, 0x38, 0x01, 0x1e, 0xfe, 0xf0, 0xff, 0x0c, 0xfe, 0x60, 0x01,
+ 0x03, 0xfe, 0x3a, 0x01, 0x0c, 0xfe, 0x62, 0x01, 0x43, 0x13, 0x20, 0x25, 0x06, 0x13, 0x2f, 0x12,
+ 0x2f, 0x92, 0x0f, 0x06, 0x04, 0x21, 0x04, 0x22, 0x59, 0xfe, 0xf7, 0x12, 0x22, 0x9f, 0xb7, 0x13,
+ 0x9f, 0x07, 0x7e, 0xfe, 0x71, 0x13, 0xfe, 0x24, 0x1c, 0x15, 0x19, 0x39, 0xa0, 0xb4, 0xfe, 0xd9,
+ 0x10, 0xc3, 0xfe, 0x03, 0xdc, 0xfe, 0x73, 0x57, 0xfe, 0x80, 0x5d, 0x04, 0xc3, 0xfe, 0x03, 0xdc,
+ 0xfe, 0x5b, 0x57, 0xfe, 0x80, 0x5d, 0x04, 0xfe, 0x03, 0x57, 0xc3, 0x21, 0xfe, 0x00, 0xcc, 0x04,
+ 0xfe, 0x03, 0x57, 0xc3, 0x78, 0x04, 0x08, 0x05, 0x58, 0xfe, 0x22, 0x13, 0xfe, 0x1c, 0x80, 0x07,
+ 0x06, 0xfe, 0x1a, 0x13, 0xfe, 0x1e, 0x80, 0xed, 0xfe, 0x1d, 0x80, 0xae, 0xfe, 0x0c, 0x90, 0xfe,
+ 0x0e, 0x13, 0xfe, 0x0e, 0x90, 0xac, 0xfe, 0x3c, 0x90, 0xfe, 0x30, 0xf4, 0x0a, 0xfe, 0x3c, 0x50,
+ 0xaa, 0x01, 0xfe, 0x7a, 0x17, 0x32, 0x07, 0x2f, 0xad, 0x01, 0xfe, 0xb4, 0x16, 0x08, 0x05, 0x1b,
+ 0x4e, 0x01, 0xf5, 0x01, 0xf6, 0x12, 0xfe, 0xe9, 0x00, 0x08, 0x05, 0x58, 0xfe, 0x2c, 0x13, 0x01,
+ 0xfe, 0x0c, 0x17, 0xfe, 0x1e, 0x1c, 0xfe, 0x14, 0x90, 0xfe, 0x96, 0x90, 0x0c, 0xfe, 0x64, 0x01,
+ 0x14, 0xfe, 0x66, 0x01, 0x08, 0x05, 0x5b, 0xfe, 0x12, 0x12, 0xfe, 0x03, 0x80, 0x8d, 0xfe, 0x01,
+ 0xec, 0x20, 0xfe, 0x80, 0x40, 0x13, 0x20, 0x6a, 0x2a, 0x12, 0xcf, 0x64, 0x22, 0x20, 0xfb, 0x79,
+ 0x20, 0x04, 0xfe, 0x08, 0x1c, 0x03, 0xfe, 0xac, 0x00, 0xfe, 0x06, 0x58, 0x03, 0xfe, 0xae, 0x00,
+
+ 0xfe, 0x07, 0x58, 0x03, 0xfe, 0xb0, 0x00, 0xfe, 0x08, 0x58, 0x03, 0xfe, 0xb2, 0x00, 0xfe, 0x09,
+ 0x58, 0xfe, 0x0a, 0x1c, 0x25, 0x6e, 0x13, 0xd0, 0x21, 0x0c, 0x5c, 0x0c, 0x45, 0x0f, 0x46, 0x52,
+ 0x50, 0x18, 0x1b, 0xfe, 0x90, 0x4d, 0xfe, 0x91, 0x54, 0x23, 0xfe, 0xfc, 0x0f, 0x44, 0x11, 0x0f,
+ 0x48, 0x52, 0x18, 0x58, 0xfe, 0x90, 0x4d, 0xfe, 0x91, 0x54, 0x23, 0xe4, 0x25, 0x11, 0x13, 0x20,
+ 0x7c, 0x6f, 0x4f, 0x22, 0x20, 0xfb, 0x79, 0x20, 0x12, 0xcf, 0xfe, 0x14, 0x56, 0xfe, 0xd6, 0xf0,
+ 0xfe, 0x26, 0x10, 0xf8, 0x74, 0xfe, 0x14, 0x1c, 0xfe, 0x10, 0x1c, 0xfe, 0x18, 0x1c, 0x04, 0x42,
+ 0xfe, 0x0c, 0x14, 0xfc, 0xfe, 0x07, 0xe6, 0x1b, 0xfe, 0xce, 0x47, 0xfe, 0xf5, 0x13, 0x04, 0x01,
+ 0xb0, 0x7c, 0x6f, 0x4f, 0xfe, 0x06, 0x80, 0xfe, 0x48, 0x47, 0xfe, 0x42, 0x13, 0x32, 0x07, 0x2f,
+ 0xfe, 0x34, 0x13, 0x09, 0x48, 0x01, 0x0e, 0xbb, 0xfe, 0x36, 0x12, 0xfe, 0x41, 0x48, 0xfe, 0x45,
+ 0x48, 0x01, 0xf0, 0xfe, 0x00, 0xcc, 0xbb, 0xfe, 0xf3, 0x13, 0x43, 0x78, 0x07, 0x11, 0xac, 0x09,
+ 0x84, 0x01, 0x0e, 0xfe, 0x80, 0x5c, 0x01, 0x73, 0xfe, 0x0e, 0x10, 0x07, 0x82, 0x4e, 0xfe, 0x14,
+ 0x56, 0xfe, 0xd6, 0xf0, 0xfe, 0x60, 0x10, 0x04, 0xfe, 0x44, 0x58, 0x8d, 0xfe, 0x01, 0xec, 0xa2,
+ 0xfe, 0x9e, 0x40, 0xfe, 0x9d, 0xe7, 0x00, 0xfe, 0x9c, 0xe7, 0x1a, 0x79, 0x2a, 0x01, 0xe3, 0xfe,
+ 0xdd, 0x10, 0x2c, 0xc7, 0x81, 0xc8, 0x83, 0x33, 0x31, 0xde, 0x07, 0x1a, 0xfe, 0x48, 0x12, 0x07,
+ 0x0a, 0xfe, 0x56, 0x12, 0x07, 0x19, 0xfe, 0x30, 0x12, 0x07, 0xc9, 0x17, 0xfe, 0x32, 0x12, 0x07,
+ 0xfe, 0x23, 0x00, 0x17, 0xeb, 0x07, 0x06, 0x17, 0xfe, 0x9c, 0x12, 0x07, 0x1f, 0xfe, 0x12, 0x12,
+ 0x07, 0x00, 0x17, 0x24, 0x15, 0xc9, 0x01, 0x36, 0xa9, 0x2d, 0x01, 0x0b, 0x94, 0x4b, 0x04, 0x2d,
+ 0xdd, 0x09, 0xd1, 0x01, 0xfe, 0x26, 0x0f, 0x12, 0x82, 0x02, 0x2b, 0x2d, 0x32, 0x07, 0xa6, 0xfe,
+ 0xd9, 0x13, 0x3a, 0x3d, 0x3b, 0x3e, 0x56, 0xfe, 0xf0, 0x11, 0x08, 0x05, 0x5a, 0xfe, 0x72, 0x12,
+ 0x9b, 0x2e, 0x9c, 0x3c, 0x90, 0xc0, 0x96, 0xfe, 0xba, 0x11, 0x22, 0x62, 0xfe, 0x26, 0x13, 0x03,
+ 0x7f, 0x29, 0x80, 0x56, 0xfe, 0x76, 0x0d, 0x0c, 0x60, 0x14, 0x61, 0x21, 0x0c, 0x7f, 0x0c, 0x80,
+ 0x01, 0xb3, 0x25, 0x6e, 0x77, 0x13, 0x62, 0x01, 0xef, 0x9b, 0x2e, 0x9c, 0x3c, 0xfe, 0x04, 0x55,
+ 0xfe, 0xa5, 0x55, 0xfe, 0x04, 0xfa, 0x2e, 0xfe, 0x05, 0xfa, 0x3c, 0xfe, 0x91, 0x10, 0x03, 0x3f,
+ 0x29, 0x40, 0xfe, 0x40, 0x56, 0xfe, 0xe1, 0x56, 0x0c, 0x3f, 0x14, 0x40, 0x88, 0x9b, 0x2e, 0x9c,
+ 0x3c, 0x90, 0xc0, 0x03, 0x5e, 0x29, 0x5f, 0xfe, 0x00, 0x56, 0xfe, 0xa1, 0x56, 0x0c, 0x5e, 0x14,
+ 0x5f, 0x08, 0x05, 0x5a, 0xfe, 0x1e, 0x12, 0x22, 0x62, 0xfe, 0x1f, 0x40, 0x03, 0x60, 0x29, 0x61,
+ 0xfe, 0x2c, 0x50, 0xfe, 0xae, 0x50, 0x03, 0x3f, 0x29, 0x40, 0xfe, 0x44, 0x50, 0xfe, 0xc6, 0x50,
+ 0x03, 0x5e, 0x29, 0x5f, 0xfe, 0x08, 0x50, 0xfe, 0x8a, 0x50, 0x03, 0x3d, 0x29, 0x3e, 0xfe, 0x40,
+ 0x50, 0xfe, 0xc2, 0x50, 0x02, 0x89, 0x25, 0x06, 0x13, 0xd4, 0x02, 0x72, 0x2d, 0x01, 0x0b, 0x1d,
+ 0x4c, 0x33, 0x31, 0xde, 0x07, 0x06, 0x23, 0x4c, 0x32, 0x07, 0xa6, 0x23, 0x72, 0x01, 0xaf, 0x1e,
+ 0x43, 0x17, 0x4c, 0x08, 0x05, 0x0a, 0xee, 0x3a, 0x3d, 0x3b, 0x3e, 0xfe, 0x0a, 0x55, 0x35, 0xfe,
+ 0x8b, 0x55, 0x57, 0x3d, 0x7d, 0x3e, 0xfe, 0x0c, 0x51, 0xfe, 0x8e, 0x51, 0x02, 0x72, 0xfe, 0x19,
+ 0x81, 0xba, 0xfe, 0x19, 0x41, 0x02, 0x72, 0x2d, 0x01, 0x0b, 0x1c, 0x34, 0x1d, 0xe8, 0x33, 0x31,
+ 0xe1, 0x55, 0x19, 0xfe, 0xa6, 0x12, 0x55, 0x0a, 0x4d, 0x02, 0x4c, 0x01, 0x0b, 0x1c, 0x34, 0x1d,
+ 0xe8, 0x33, 0x31, 0xdf, 0x07, 0x19, 0x23, 0x4c, 0x01, 0x0b, 0x1d, 0xe8, 0x33, 0x31, 0xfe, 0xe8,
+ 0x09, 0xfe, 0xc2, 0x49, 0x51, 0x03, 0xfe, 0x9c, 0x00, 0x28, 0x8a, 0x53, 0x05, 0x1f, 0x35, 0xa9,
+ 0xfe, 0xbb, 0x45, 0x55, 0x00, 0x4e, 0x44, 0x06, 0x7c, 0x43, 0xfe, 0xda, 0x14, 0x01, 0xaf, 0x8c,
+ 0xfe, 0x4b, 0x45, 0xee, 0x32, 0x07, 0xa5, 0xed, 0x03, 0xcd, 0x28, 0x8a, 0x03, 0x45, 0x28, 0x35,
+ 0x67, 0x02, 0x72, 0xfe, 0xc0, 0x5d, 0xfe, 0xf8, 0x14, 0xfe, 0x03, 0x17, 0x03, 0x5c, 0xc1, 0x0c,
+ 0x5c, 0x67, 0x2d, 0x01, 0x0b, 0x26, 0x89, 0x01, 0xfe, 0x9e, 0x15, 0x02, 0x89, 0x01, 0x0b, 0x1c,
+ 0x34, 0x1d, 0x4c, 0x33, 0x31, 0xdf, 0x07, 0x06, 0x23, 0x4c, 0x01, 0xf1, 0xfe, 0x42, 0x58, 0xf1,
+ 0xfe, 0xa4, 0x14, 0x8c, 0xfe, 0x4a, 0xf4, 0x0a, 0x17, 0x4c, 0xfe, 0x4a, 0xf4, 0x06, 0xea, 0x32,
+ 0x07, 0xa5, 0x8b, 0x02, 0x72, 0x03, 0x45, 0xc1, 0x0c, 0x45, 0x67, 0x2d, 0x01, 0x0b, 0x26, 0x89,
+ 0x01, 0xfe, 0xcc, 0x15, 0x02, 0x89, 0x0f, 0x06, 0x27, 0xfe, 0xbe, 0x13, 0x26, 0xfe, 0xd4, 0x13,
+ 0x76, 0xfe, 0x89, 0x48, 0x01, 0x0b, 0x21, 0x76, 0x04, 0x7b, 0xfe, 0xd0, 0x13, 0x1c, 0xfe, 0xd0,
+ 0x13, 0x1d, 0xfe, 0xbe, 0x13, 0x67, 0x2d, 0x01, 0x0b, 0xfe, 0xd5, 0x10, 0x0f, 0x71, 0xff, 0x02,
+ 0x00, 0x57, 0x52, 0x93, 0x1e, 0xfe, 0xff, 0x7f, 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x04, 0x0f,
+ 0x71, 0xff, 0x02, 0x00, 0x57, 0x52, 0x93, 0x1e, 0x43, 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x04,
+ 0x0f, 0x71, 0xff, 0x02, 0x00, 0x57, 0x52, 0x93, 0x04, 0x0f, 0x71, 0xff, 0x02, 0x00, 0x57, 0x52,
+ 0x93, 0xfe, 0x0b, 0x58, 0x04, 0x09, 0x5c, 0x01, 0x87, 0x09, 0x45, 0x01, 0x87, 0x04, 0xfe, 0x03,
+ 0xa1, 0x1e, 0x11, 0xff, 0x03, 0x00, 0x54, 0xfe, 0x00, 0xf4, 0x1f, 0x52, 0xfe, 0x00, 0x7d, 0xfe,
+ 0x01, 0x7d, 0xfe, 0x02, 0x7d, 0xfe, 0x03, 0x7c, 0x6a, 0x2a, 0x0c, 0x5e, 0x14, 0x5f, 0x57, 0x3f,
+ 0x7d, 0x40, 0x04, 0xdd, 0xfe, 0x82, 0x4a, 0xfe, 0xe1, 0x1a, 0xfe, 0x83, 0x5a, 0x8d, 0x04, 0x01,
+ 0xfe, 0x0c, 0x19, 0xfe, 0x42, 0x48, 0x50, 0x51, 0x91, 0x01, 0x0b, 0x1d, 0xfe, 0x96, 0x15, 0x33,
+ 0x31, 0xe1, 0x01, 0x0b, 0x1d, 0xfe, 0x96, 0x15, 0x33, 0x31, 0xfe, 0xe8, 0x0a, 0xfe, 0xc1, 0x59,
+ 0x03, 0xcd, 0x28, 0xfe, 0xcc, 0x12, 0x53, 0x05, 0x1a, 0xfe, 0xc4, 0x13, 0x21, 0x69, 0x1a, 0xee,
+ 0x55, 0xca, 0x6b, 0xfe, 0xdc, 0x14, 0x4d, 0x0f, 0x06, 0x18, 0xca, 0x7c, 0x30, 0xfe, 0x78, 0x10,
+ 0xff, 0x02, 0x83, 0x55, 0xab, 0xff, 0x02, 0x83, 0x55, 0x69, 0x19, 0xae, 0x98, 0xfe, 0x30, 0x00,
+ 0x96, 0xf2, 0x18, 0x6d, 0x0f, 0x06, 0xfe, 0x56, 0x10, 0x69, 0x0a, 0xed, 0x98, 0xfe, 0x64, 0x00,
+ 0x96, 0xf2, 0x09, 0xfe, 0x64, 0x00, 0x18, 0x9e, 0x0f, 0x06, 0xfe, 0x28, 0x10, 0x69, 0x06, 0xfe,
+ 0x60, 0x13, 0x98, 0xfe, 0xc8, 0x00, 0x96, 0xf2, 0x09, 0xfe, 0xc8, 0x00, 0x18, 0x59, 0x0f, 0x06,
+ 0x88, 0x98, 0xfe, 0x90, 0x01, 0x7a, 0xfe, 0x42, 0x15, 0x91, 0xe4, 0xfe, 0x43, 0xf4, 0x9f, 0xfe,
+ 0x56, 0xf0, 0xfe, 0x54, 0x15, 0xfe, 0x04, 0xf4, 0x71, 0xfe, 0x43, 0xf4, 0x9e, 0xfe, 0xf3, 0x10,
+ 0xfe, 0x40, 0x5c, 0x01, 0xfe, 0x16, 0x14, 0x1e, 0x43, 0xec, 0xfe, 0x00, 0x17, 0xfe, 0x4d, 0xe4,
+ 0x6e, 0x7a, 0xfe, 0x90, 0x15, 0xc4, 0x6e, 0xfe, 0x1c, 0x10, 0xfe, 0x00, 0x17, 0xfe, 0x4d, 0xe4,
+ 0xcc, 0x7a, 0xfe, 0x90, 0x15, 0xc4, 0xcc, 0x88, 0x51, 0x21, 0xfe, 0x4d, 0xf4, 0x00, 0xe9, 0x91,
+ 0x0f, 0x06, 0xfe, 0xb4, 0x56, 0xfe, 0xc3, 0x58, 0x04, 0x51, 0x0f, 0x0a, 0x04, 0x16, 0x06, 0x01,
+ 0x0b, 0x26, 0xf3, 0x16, 0x0a, 0x01, 0x0b, 0x26, 0xf3, 0x16, 0x19, 0x01, 0x0b, 0x26, 0xf3, 0x76,
+ 0xfe, 0x89, 0x49, 0x01, 0x0b, 0x04, 0x16, 0x06, 0x01, 0x0b, 0x26, 0xb1, 0x16, 0x19, 0x01, 0x0b,
+ 0x26, 0xb1, 0x16, 0x06, 0x01, 0x0b, 0x26, 0xb1, 0xfe, 0x89, 0x49, 0x01, 0x0b, 0x26, 0xb1, 0x76,
+ 0xfe, 0x89, 0x4a, 0x01, 0x0b, 0x04, 0x51, 0x04, 0x22, 0xd3, 0x07, 0x06, 0xfe, 0x48, 0x13, 0xb8,
+ 0x13, 0xd3, 0xfe, 0x49, 0xf4, 0x00, 0x4d, 0x76, 0xa9, 0x67, 0xfe, 0x01, 0xec, 0xfe, 0x27, 0x01,
+ 0xfe, 0x89, 0x48, 0xff, 0x02, 0x00, 0x10, 0x27, 0xfe, 0x2e, 0x16, 0x32, 0x07, 0xfe, 0xe3, 0x00,
+ 0xfe, 0x20, 0x13, 0x1d, 0xfe, 0x52, 0x16, 0x21, 0x13, 0xd4, 0x01, 0x4b, 0x22, 0xd4, 0x07, 0x06,
+ 0x4e, 0x08, 0x54, 0x06, 0x37, 0x04, 0x09, 0x48, 0x01, 0x0e, 0xfb, 0x8e, 0x07, 0x11, 0xae, 0x09,
+ 0x84, 0x01, 0x0e, 0x8e, 0x09, 0x5d, 0x01, 0xa8, 0x04, 0x09, 0x84, 0x01, 0x0e, 0x8e, 0xfe, 0x80,
+ 0xe7, 0x11, 0x07, 0x11, 0x8a, 0xfe, 0x45, 0x58, 0x01, 0xf0, 0x8e, 0x04, 0x09, 0x48, 0x01, 0x0e,
+ 0x8e, 0x09, 0x5d, 0x01, 0xa8, 0x04, 0x09, 0x48, 0x01, 0x0e, 0xfe, 0x80, 0x80, 0xfe, 0x80, 0x4c,
+ 0xfe, 0x49, 0xe4, 0x11, 0xae, 0x09, 0x84, 0x01, 0x0e, 0xfe, 0x80, 0x4c, 0x09, 0x5d, 0x01, 0x87,
+ 0x04, 0x18, 0x11, 0x75, 0x6c, 0xfe, 0x60, 0x01, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe, 0x24,
+ 0x1c, 0xfe, 0x1d, 0xf7, 0x1b, 0x97, 0xfe, 0xee, 0x16, 0x01, 0xfe, 0xf4, 0x17, 0xad, 0x9a, 0x1b,
+ 0x6c, 0xfe, 0x2c, 0x01, 0xfe, 0x2f, 0x19, 0x04, 0xb9, 0x23, 0xfe, 0xde, 0x16, 0xfe, 0xda, 0x10,
+ 0x18, 0x11, 0x75, 0x03, 0xfe, 0x64, 0x01, 0xfe, 0x00, 0xf4, 0x1f, 0xfe, 0x18, 0x58, 0x03, 0xfe,
+ 0x66, 0x01, 0xfe, 0x19, 0x58, 0x9a, 0x1f, 0xfe, 0x3c, 0x90, 0xfe, 0x30, 0xf4, 0x06, 0xfe, 0x3c,
+ 0x50, 0x6c, 0xfe, 0x38, 0x00, 0xfe, 0x0f, 0x79, 0xfe, 0x1c, 0xf7, 0x1f, 0x97, 0xfe, 0x38, 0x17,
+ 0xfe, 0xb6, 0x14, 0x35, 0x04, 0xb9, 0x23, 0xfe, 0x10, 0x17, 0xfe, 0x9c, 0x10, 0x18, 0x11, 0x75,
+ 0xfe, 0x83, 0x5a, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe, 0x1d, 0xf7, 0x2e, 0x97, 0xfe, 0x5a,
+ 0x17, 0xfe, 0x94, 0x14, 0xec, 0x9a, 0x2e, 0x6c, 0x1a, 0xfe, 0xaf, 0x19, 0xfe, 0x98, 0xe7, 0x00,
+ 0x04, 0xb9, 0x23, 0xfe, 0x4e, 0x17, 0xfe, 0x6c, 0x10, 0x18, 0x11, 0x75, 0xfe, 0x30, 0xbc, 0xfe,
+ 0xb2, 0xbc, 0x9a, 0xcb, 0x6c, 0x1a, 0xfe, 0x0f, 0x79, 0xfe, 0x1c, 0xf7, 0xcb, 0x97, 0xfe, 0x92,
+ 0x17, 0xfe, 0x5c, 0x14, 0x35, 0x04, 0xb9, 0x23, 0xfe, 0x7e, 0x17, 0xfe, 0x42, 0x10, 0xfe, 0x02,
+ 0xf6, 0x11, 0x75, 0xfe, 0x18, 0xfe, 0x60, 0xfe, 0x19, 0xfe, 0x61, 0xfe, 0x03, 0xa1, 0xfe, 0x1d,
+ 0xf7, 0x5b, 0x97, 0xfe, 0xb8, 0x17, 0xfe, 0x36, 0x14, 0xfe, 0x1c, 0x13, 0x9a, 0x5b, 0x41, 0xfe,
+ 0x83, 0x58, 0xfe, 0xaf, 0x19, 0xfe, 0x80, 0xe7, 0x11, 0xfe, 0x81, 0xe7, 0x11, 0x12, 0xfe, 0xdd,
+ 0x00, 0x6a, 0x2a, 0x04, 0x6a, 0x2a, 0xfe, 0x12, 0x45, 0x23, 0xfe, 0xa8, 0x17, 0x15, 0x06, 0x39,
+ 0xa0, 0xb4, 0x02, 0x2b, 0xfe, 0x39, 0xf0, 0xfe, 0xfc, 0x17, 0x21, 0x04, 0xfe, 0x7e, 0x18, 0x1e,
+ 0x19, 0x66, 0x0f, 0x0d, 0x04, 0x75, 0x03, 0xd2, 0x1e, 0x06, 0xfe, 0xef, 0x12, 0xfe, 0xe1, 0x10,
+ 0x7c, 0x6f, 0x4f, 0x32, 0x07, 0x2f, 0xfe, 0x3c, 0x13, 0xf1, 0xfe, 0x42, 0x13, 0x42, 0x92, 0x09,
+ 0x48, 0x01, 0x0e, 0xbb, 0xeb, 0xfe, 0x41, 0x48, 0xfe, 0x45, 0x48, 0x01, 0xf0, 0xfe, 0x00, 0xcc,
+ 0xbb, 0xfe, 0xf3, 0x13, 0x43, 0x78, 0x07, 0x11, 0xac, 0x09, 0x84, 0x01, 0x0e, 0xfe, 0x80, 0x4c,
+ 0x01, 0x73, 0xfe, 0x16, 0x10, 0x07, 0x82, 0x8b, 0xfe, 0x40, 0x14, 0xfe, 0x24, 0x12, 0xfe, 0x14,
+ 0x56, 0xfe, 0xd6, 0xf0, 0xfe, 0x1c, 0x18, 0x18, 0x0a, 0x04, 0xfe, 0x9c, 0xe7, 0x0a, 0x10, 0xfe,
+ 0x15, 0x00, 0x64, 0x79, 0x2a, 0x01, 0xe3, 0x18, 0x06, 0x04, 0x42, 0x92, 0x08, 0x54, 0x1b, 0x37,
+ 0x12, 0x2f, 0x01, 0x73, 0x18, 0x06, 0x04, 0xfe, 0x38, 0x90, 0xfe, 0xba, 0x90, 0x3a, 0xce, 0x3b,
+ 0xcf, 0xfe, 0x48, 0x55, 0x35, 0xfe, 0xc9, 0x55, 0x04, 0x22, 0xa3, 0x77, 0x13, 0xa3, 0x04, 0x09,
+ 0xa4, 0x01, 0x0e, 0xfe, 0x41, 0x48, 0x09, 0x46, 0x01, 0x0e, 0xfe, 0x49, 0x44, 0x17, 0xfe, 0xe8,
+ 0x18, 0x77, 0x78, 0x04, 0x09, 0x48, 0x01, 0x0e, 0x07, 0x11, 0x4e, 0x09, 0x5d, 0x01, 0xa8, 0x09,
+ 0x46, 0x01, 0x0e, 0x77, 0x78, 0x04, 0xfe, 0x4e, 0xe4, 0x19, 0x6b, 0xfe, 0x1c, 0x19, 0x03, 0xfe,
+ 0x90, 0x00, 0xfe, 0x3a, 0x45, 0xfe, 0x2c, 0x10, 0xfe, 0x4e, 0xe4, 0xc9, 0x6b, 0xfe, 0x2e, 0x19,
+ 0x03, 0xfe, 0x92, 0x00, 0xfe, 0x02, 0xe6, 0x1a, 0xe5, 0xfe, 0x4e, 0xe4, 0xfe, 0x0b, 0x00, 0x6b,
+ 0xfe, 0x40, 0x19, 0x03, 0xfe, 0x94, 0x00, 0xfe, 0x02, 0xe6, 0x1f, 0xfe, 0x08, 0x10, 0x03, 0xfe,
+ 0x96, 0x00, 0xfe, 0x02, 0xe6, 0x6d, 0xfe, 0x4e, 0x45, 0xea, 0xba, 0xff, 0x04, 0x68, 0x54, 0xe7,
+ 0x1e, 0x6e, 0xfe, 0x08, 0x1c, 0xfe, 0x67, 0x19, 0xfe, 0x0a, 0x1c, 0xfe, 0x1a, 0xf4, 0xfe, 0x00,
+ 0x04, 0xea, 0xfe, 0x48, 0xf4, 0x19, 0x7a, 0xfe, 0x74, 0x19, 0x0f, 0x19, 0x04, 0x07, 0x7e, 0xfe,
+ 0x5a, 0xf0, 0xfe, 0x84, 0x19, 0x25, 0xfe, 0x09, 0x00, 0xfe, 0x34, 0x10, 0x07, 0x1a, 0xfe, 0x5a,
+ 0xf0, 0xfe, 0x92, 0x19, 0x25, 0xca, 0xfe, 0x26, 0x10, 0x07, 0x19, 0x66, 0x25, 0x6d, 0xe5, 0x07,
+ 0x0a, 0x66, 0x25, 0x9e, 0xfe, 0x0e, 0x10, 0x07, 0x06, 0x66, 0x25, 0x59, 0xa9, 0xb8, 0x04, 0x15,
+ 0xfe, 0x09, 0x00, 0x01, 0x36, 0xfe, 0x04, 0xfe, 0x81, 0x03, 0x83, 0xfe, 0x40, 0x5c, 0x04, 0x1c,
+ 0xf7, 0xfe, 0x14, 0xf0, 0x0b, 0x27, 0xfe, 0xd6, 0x19, 0x1c, 0xf7, 0x7b, 0xf7, 0xfe, 0x82, 0xf0,
+ 0xfe, 0xda, 0x19, 0x04, 0xff, 0xcc, 0x00, 0x00,
+};
+
+STATIC unsigned short _adv_asc38C0800_size =
+ sizeof(_adv_asc38C0800_buf); /* 0x14E1 */
+STATIC ADV_DCNT _adv_asc38C0800_chksum =
+ 0x050D3FD8UL; /* Expanded little-endian checksum. */
+
+/* Microcode buffer is kept after initialization for error recovery. */
+STATIC unsigned char _adv_asc38C1600_buf[] = {
+ 0x00, 0x00, 0x00, 0xf2, 0x00, 0x16, 0x00, 0xfc, 0x00, 0x10, 0x00, 0xf0, 0x18, 0xe4, 0x01, 0x00,
+ 0x04, 0x1e, 0x48, 0xe4, 0x03, 0xf6, 0xf7, 0x13, 0x2e, 0x1e, 0x02, 0x00, 0x07, 0x17, 0xc0, 0x5f,
+ 0x00, 0xfa, 0xff, 0xff, 0x04, 0x00, 0x00, 0xf6, 0x09, 0xe7, 0x82, 0xe7, 0x85, 0xf0, 0x86, 0xf0,
+ 0x4e, 0x10, 0x9e, 0xe7, 0xff, 0x00, 0x55, 0xf0, 0x01, 0xf6, 0x03, 0x00, 0x98, 0x57, 0x01, 0xe6,
+ 0x00, 0xea, 0x00, 0xec, 0x01, 0xfa, 0x18, 0xf4, 0x08, 0x00, 0xf0, 0x1d, 0x38, 0x54, 0x32, 0xf0,
+ 0x10, 0x00, 0xc2, 0x0e, 0x1e, 0xf0, 0xd5, 0xf0, 0xbc, 0x00, 0x4b, 0xe4, 0x00, 0xe6, 0xb1, 0xf0,
+ 0xb4, 0x00, 0x02, 0x13, 0x3e, 0x1c, 0xc8, 0x47, 0x3e, 0x00, 0xd8, 0x01, 0x06, 0x13, 0x0c, 0x1c,
+ 0x5e, 0x1e, 0x00, 0x57, 0xc8, 0x57, 0x01, 0xfc, 0xbc, 0x0e, 0xa2, 0x12, 0xb9, 0x54, 0x00, 0x80,
+ 0x62, 0x0a, 0x5a, 0x12, 0xc8, 0x15, 0x3e, 0x1e, 0x18, 0x40, 0xbd, 0x56, 0x03, 0xe6, 0x01, 0xea,
+ 0x5c, 0xf0, 0x0f, 0x00, 0x20, 0x00, 0x6c, 0x01, 0x6e, 0x01, 0x04, 0x12, 0x04, 0x13, 0xbb, 0x55,
+ 0x3c, 0x56, 0x3e, 0x57, 0x03, 0x58, 0x4a, 0xe4, 0x40, 0x00, 0xb6, 0x00, 0xbb, 0x00, 0xc0, 0x00,
+ 0x00, 0x01, 0x01, 0x01, 0x3e, 0x01, 0x58, 0x0a, 0x44, 0x10, 0x0a, 0x12, 0x4c, 0x1c, 0x4e, 0x1c,
+ 0x02, 0x4a, 0x30, 0xe4, 0x05, 0xe6, 0x0c, 0x00, 0x3c, 0x00, 0x80, 0x00, 0x24, 0x01, 0x3c, 0x01,
+ 0x68, 0x01, 0x6a, 0x01, 0x70, 0x01, 0x72, 0x01, 0x74, 0x01, 0x76, 0x01, 0x78, 0x01, 0x7c, 0x01,
+ 0xc6, 0x0e, 0x0c, 0x10, 0xac, 0x12, 0xae, 0x12, 0x16, 0x1a, 0x32, 0x1c, 0x6e, 0x1e, 0x02, 0x48,
+ 0x3a, 0x55, 0xc9, 0x57, 0x02, 0xee, 0x5b, 0xf0, 0x03, 0xf7, 0x06, 0xf7, 0x03, 0xfc, 0x06, 0x00,
+ 0x1e, 0x00, 0xbe, 0x00, 0xe1, 0x00, 0x0c, 0x12, 0x18, 0x1a, 0x70, 0x1a, 0x30, 0x1c, 0x38, 0x1c,
+ 0x10, 0x44, 0x00, 0x4c, 0xb0, 0x57, 0x40, 0x5c, 0x4d, 0xe4, 0x04, 0xea, 0x5d, 0xf0, 0xa7, 0xf0,
+ 0x04, 0xf6, 0x02, 0xfc, 0x05, 0x00, 0x09, 0x00, 0x19, 0x00, 0x32, 0x00, 0x33, 0x00, 0x34, 0x00,
+ 0x36, 0x00, 0x98, 0x00, 0x9e, 0x00, 0xcc, 0x00, 0x20, 0x01, 0x4e, 0x01, 0x79, 0x01, 0x3c, 0x09,
+ 0x68, 0x0d, 0x02, 0x10, 0x04, 0x10, 0x3a, 0x10, 0x08, 0x12, 0x0a, 0x13, 0x40, 0x16, 0x50, 0x16,
+ 0x00, 0x17, 0x4a, 0x19, 0x00, 0x4e, 0x00, 0x54, 0x01, 0x58, 0x00, 0xdc, 0x05, 0xf0, 0x09, 0xf0,
+ 0x59, 0xf0, 0xb8, 0xf0, 0x48, 0xf4, 0x0e, 0xf7, 0x0a, 0x00, 0x9b, 0x00, 0x9c, 0x00, 0xa4, 0x00,
+ 0xb5, 0x00, 0xba, 0x00, 0xd0, 0x00, 0xe7, 0x00, 0xf0, 0x03, 0x69, 0x08, 0xe9, 0x09, 0x5c, 0x0c,
+ 0xb6, 0x12, 0xbc, 0x19, 0xd8, 0x1b, 0x20, 0x1c, 0x34, 0x1c, 0x36, 0x1c, 0x42, 0x1d, 0x08, 0x44,
+ 0x38, 0x44, 0x91, 0x44, 0x0a, 0x45, 0x48, 0x46, 0x89, 0x48, 0x68, 0x54, 0x83, 0x55, 0x83, 0x59,
+ 0x31, 0xe4, 0x02, 0xe6, 0x07, 0xf0, 0x08, 0xf0, 0x0b, 0xf0, 0x0c, 0xf0, 0x4b, 0xf4, 0x04, 0xf8,
+ 0x05, 0xf8, 0x02, 0xfa, 0x03, 0xfa, 0x04, 0xfc, 0x05, 0xfc, 0x07, 0x00, 0xa8, 0x00, 0xaa, 0x00,
+ 0xb9, 0x00, 0xe0, 0x00, 0xe5, 0x00, 0x22, 0x01, 0x26, 0x01, 0x60, 0x01, 0x7a, 0x01, 0x82, 0x01,
+ 0xc8, 0x01, 0xca, 0x01, 0x86, 0x02, 0x6a, 0x03, 0x18, 0x05, 0xb2, 0x07, 0x68, 0x08, 0x10, 0x0d,
+ 0x06, 0x10, 0x0a, 0x10, 0x0e, 0x10, 0x12, 0x10, 0x60, 0x10, 0xed, 0x10, 0xf3, 0x10, 0x06, 0x12,
+ 0x10, 0x12, 0x1e, 0x12, 0x0c, 0x13, 0x0e, 0x13, 0x10, 0x13, 0xfe, 0x9c, 0xf0, 0x35, 0x05, 0xfe,
+ 0xec, 0x0e, 0xff, 0x10, 0x00, 0x00, 0xe9, 0xfe, 0x34, 0x1f, 0x00, 0xe8, 0xfe, 0x88, 0x01, 0xff,
+ 0x03, 0x00, 0x00, 0xfe, 0x93, 0x15, 0xfe, 0x0f, 0x05, 0xff, 0x38, 0x00, 0x00, 0xfe, 0x57, 0x24,
+ 0x00, 0xfe, 0x4c, 0x00, 0x65, 0xff, 0x04, 0x00, 0x00, 0x1a, 0xff, 0x09, 0x00, 0x00, 0xff, 0x08,
+ 0x01, 0x01, 0xff, 0x08, 0xff, 0xff, 0xff, 0x27, 0x00, 0x00, 0xff, 0x10, 0xff, 0xff, 0xff, 0x13,
+ 0x00, 0x00, 0xfe, 0x78, 0x56, 0xfe, 0x34, 0x12, 0xff, 0x21, 0x00, 0x00, 0xfe, 0x04, 0xf7, 0xe8,
+ 0x37, 0x7d, 0x0d, 0x01, 0xfe, 0x4a, 0x11, 0xfe, 0x04, 0xf7, 0xe8, 0x7d, 0x0d, 0x51, 0x37, 0xfe,
+ 0x3d, 0xf0, 0xfe, 0x0c, 0x02, 0xfe, 0x20, 0xf0, 0xbc, 0xfe, 0x91, 0xf0, 0xfe, 0xf8, 0x01, 0xfe,
+ 0x90, 0xf0, 0xfe, 0xf8, 0x01, 0xfe, 0x8f, 0xf0, 0xbc, 0x03, 0x67, 0x4d, 0x05, 0xfe, 0x08, 0x0f,
+ 0x01, 0xfe, 0x78, 0x0f, 0xfe, 0xdd, 0x12, 0x05, 0xfe, 0x0e, 0x03, 0xfe, 0x28, 0x1c, 0x03, 0xfe,
+ 0xa6, 0x00, 0xfe, 0xd1, 0x12, 0x3e, 0x22, 0xfe, 0xa6, 0x00, 0xac, 0xfe, 0x48, 0xf0, 0xfe, 0x90,
+ 0x02, 0xfe, 0x49, 0xf0, 0xfe, 0xaa, 0x02, 0xfe, 0x4a, 0xf0, 0xfe, 0xc8, 0x02, 0xfe, 0x46, 0xf0,
+ 0xfe, 0x5a, 0x02, 0xfe, 0x47, 0xf0, 0xfe, 0x60, 0x02, 0xfe, 0x43, 0xf0, 0xfe, 0x4e, 0x02, 0xfe,
+ 0x44, 0xf0, 0xfe, 0x52, 0x02, 0xfe, 0x45, 0xf0, 0xfe, 0x56, 0x02, 0x1c, 0x0d, 0xa2, 0x1c, 0x07,
+ 0x22, 0xb7, 0x05, 0x35, 0xfe, 0x00, 0x1c, 0xfe, 0xf1, 0x10, 0xfe, 0x02, 0x1c, 0xf5, 0xfe, 0x1e,
+ 0x1c, 0xfe, 0xe9, 0x10, 0x01, 0x5f, 0xfe, 0xe7, 0x10, 0xfe, 0x06, 0xfc, 0xde, 0x0a, 0x81, 0x01,
+ 0xa3, 0x05, 0x35, 0x1f, 0x95, 0x47, 0xb8, 0x01, 0xfe, 0xe4, 0x11, 0x0a, 0x81, 0x01, 0x5c, 0xfe,
+ 0xbd, 0x10, 0x0a, 0x81, 0x01, 0x5c, 0xfe, 0xad, 0x10, 0xfe, 0x16, 0x1c, 0xfe, 0x58, 0x1c, 0x1c,
+ 0x07, 0x22, 0xb7, 0x37, 0x2a, 0x35, 0xfe, 0x3d, 0xf0, 0xfe, 0x0c, 0x02, 0x2b, 0xfe, 0x9e, 0x02,
+ 0xfe, 0x5a, 0x1c, 0xfe, 0x12, 0x1c, 0xfe, 0x14, 0x1c, 0x1f, 0xfe, 0x30, 0x00, 0x47, 0xb8, 0x01,
+ 0xfe, 0xd4, 0x11, 0x1c, 0x07, 0x22, 0xb7, 0x05, 0xe9, 0x21, 0x2c, 0x09, 0x1a, 0x31, 0xfe, 0x69,
+ 0x10, 0x1c, 0x07, 0x22, 0xb7, 0xfe, 0x04, 0xec, 0x2c, 0x60, 0x01, 0xfe, 0x1e, 0x1e, 0x20, 0x2c,
+ 0xfe, 0x05, 0xf6, 0xde, 0x01, 0xfe, 0x62, 0x1b, 0x01, 0x0c, 0x61, 0x4a, 0x44, 0x15, 0x56, 0x51,
+ 0x01, 0xfe, 0x9e, 0x1e, 0x01, 0xfe, 0x96, 0x1a, 0x05, 0x35, 0x0a, 0x57, 0x01, 0x18, 0x09, 0x00,
+ 0x36, 0x01, 0x85, 0xfe, 0x18, 0x10, 0xfe, 0x41, 0x58, 0x0a, 0xba, 0x01, 0x18, 0xfe, 0xc8, 0x54,
+ 0x7b, 0xfe, 0x1c, 0x03, 0x01, 0xfe, 0x96, 0x1a, 0x05, 0x35, 0x37, 0x60, 0xfe, 0x02, 0xe8, 0x30,
+ 0xfe, 0xbf, 0x57, 0xfe, 0x9e, 0x43, 0xfe, 0x77, 0x57, 0xfe, 0x27, 0xf0, 0xfe, 0xe4, 0x01, 0xfe,
+ 0x07, 0x4b, 0xfe, 0x20, 0xf0, 0xbc, 0xfe, 0x40, 0x1c, 0x2a, 0xeb, 0xfe, 0x26, 0xf0, 0xfe, 0x66,
+ 0x03, 0xfe, 0xa0, 0xf0, 0xfe, 0x54, 0x03, 0xfe, 0x11, 0xf0, 0xbc, 0xfe, 0xef, 0x10, 0xfe, 0x9f,
+ 0xf0, 0xfe, 0x74, 0x03, 0xfe, 0x46, 0x1c, 0x19, 0xfe, 0x11, 0x00, 0x05, 0x70, 0x37, 0xfe, 0x48,
+ 0x1c, 0xfe, 0x46, 0x1c, 0x01, 0x0c, 0x06, 0x28, 0xfe, 0x18, 0x13, 0x26, 0x21, 0xb9, 0xc7, 0x20,
+ 0xb9, 0x0a, 0x57, 0x01, 0x18, 0xc7, 0x89, 0x01, 0xfe, 0xc8, 0x1a, 0x15, 0xe1, 0x2a, 0xeb, 0xfe,
+ 0x01, 0xf0, 0xeb, 0xfe, 0x82, 0xf0, 0xfe, 0xa4, 0x03, 0xfe, 0x9c, 0x32, 0x15, 0xfe, 0xe4, 0x00,
+ 0x2f, 0xfe, 0xb6, 0x03, 0x2a, 0x3c, 0x16, 0xfe, 0xc6, 0x03, 0x01, 0x41, 0xfe, 0x06, 0xf0, 0xfe,
+ 0xd6, 0x03, 0xaf, 0xa0, 0xfe, 0x0a, 0xf0, 0xfe, 0xa2, 0x07, 0x05, 0x29, 0x03, 0x81, 0x1e, 0x1b,
+ 0xfe, 0x24, 0x05, 0x1f, 0x63, 0x01, 0x42, 0x8f, 0xfe, 0x70, 0x02, 0x05, 0xea, 0xfe, 0x46, 0x1c,
+ 0x37, 0x7d, 0x1d, 0xfe, 0x67, 0x1b, 0xfe, 0xbf, 0x57, 0xfe, 0x77, 0x57, 0xfe, 0x48, 0x1c, 0x75,
+ 0x01, 0xa6, 0x86, 0x0a, 0x57, 0x01, 0x18, 0x09, 0x00, 0x1b, 0xec, 0x0a, 0xe1, 0x01, 0x18, 0x77,
+ 0x50, 0x40, 0x8d, 0x30, 0x03, 0x81, 0x1e, 0xf8, 0x1f, 0x63, 0x01, 0x42, 0x8f, 0xfe, 0x70, 0x02,
+ 0x05, 0xea, 0xd7, 0x99, 0xd8, 0x9c, 0x2a, 0x29, 0x2f, 0xfe, 0x4e, 0x04, 0x16, 0xfe, 0x4a, 0x04,
+ 0x7e, 0xfe, 0xa0, 0x00, 0xfe, 0x9b, 0x57, 0xfe, 0x54, 0x12, 0x32, 0xff, 0x02, 0x00, 0x10, 0x01,
+ 0x08, 0x16, 0xfe, 0x02, 0x05, 0x32, 0x01, 0x08, 0x16, 0x29, 0x27, 0x25, 0xee, 0xfe, 0x4c, 0x44,
+ 0xfe, 0x58, 0x12, 0x50, 0xfe, 0x44, 0x48, 0x13, 0x34, 0xfe, 0x4c, 0x54, 0x7b, 0xec, 0x60, 0x8d,
+ 0x30, 0x01, 0xfe, 0x4e, 0x1e, 0xfe, 0x48, 0x47, 0xfe, 0x7c, 0x13, 0x01, 0x0c, 0x06, 0x28, 0xfe,
+ 0x32, 0x13, 0x01, 0x43, 0x09, 0x9b, 0xfe, 0x68, 0x13, 0xfe, 0x26, 0x10, 0x13, 0x34, 0xfe, 0x4c,
+ 0x54, 0x7b, 0xec, 0x01, 0xfe, 0x4e, 0x1e, 0xfe, 0x48, 0x47, 0xfe, 0x54, 0x13, 0x01, 0x0c, 0x06,
+ 0x28, 0xa5, 0x01, 0x43, 0x09, 0x9b, 0xfe, 0x40, 0x13, 0x01, 0x0c, 0x06, 0x28, 0xf9, 0x1f, 0x7f,
+ 0x01, 0x0c, 0x06, 0x07, 0x4d, 0x1f, 0xfe, 0x0d, 0x00, 0x01, 0x42, 0x8f, 0xfe, 0xa4, 0x0e, 0x05,
+ 0x29, 0x32, 0x15, 0xfe, 0xe6, 0x00, 0x0f, 0xfe, 0x1c, 0x90, 0x04, 0xfe, 0x9c, 0x93, 0x3a, 0x0b,
+ 0x0e, 0x8b, 0x02, 0x1f, 0x7f, 0x01, 0x42, 0x05, 0x35, 0xfe, 0x42, 0x5b, 0x7d, 0x1d, 0xfe, 0x46,
+ 0x59, 0xfe, 0xbf, 0x57, 0xfe, 0x77, 0x57, 0x0f, 0xfe, 0x87, 0x80, 0x04, 0xfe, 0x87, 0x83, 0xfe,
+ 0xc9, 0x47, 0x0b, 0x0e, 0xd0, 0x65, 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x98, 0x13, 0x0f, 0xfe, 0x20,
+ 0x80, 0x04, 0xfe, 0xa0, 0x83, 0x33, 0x0b, 0x0e, 0x09, 0x1d, 0xfe, 0x84, 0x12, 0x01, 0x38, 0x06,
+ 0x07, 0xfe, 0x70, 0x13, 0x03, 0xfe, 0xa2, 0x00, 0x1e, 0x1b, 0xfe, 0xda, 0x05, 0xd0, 0x54, 0x01,
+ 0x38, 0x06, 0x0d, 0xfe, 0x58, 0x13, 0x03, 0xfe, 0xa0, 0x00, 0x1e, 0xfe, 0x50, 0x12, 0x5e, 0xff,
+ 0x02, 0x00, 0x10, 0x2f, 0xfe, 0x90, 0x05, 0x2a, 0x3c, 0xcc, 0xff, 0x02, 0x00, 0x10, 0x2f, 0xfe,
+ 0x9e, 0x05, 0x17, 0xfe, 0xf4, 0x05, 0x15, 0xfe, 0xe3, 0x00, 0x26, 0x01, 0x38, 0xfe, 0x4a, 0xf0,
+ 0xfe, 0xc0, 0x05, 0xfe, 0x49, 0xf0, 0xfe, 0xba, 0x05, 0x71, 0x2e, 0xfe, 0x21, 0x00, 0xf1, 0x2e,
+ 0xfe, 0x22, 0x00, 0xa2, 0x2e, 0x4a, 0xfe, 0x09, 0x48, 0xff, 0x02, 0x00, 0x10, 0x2f, 0xfe, 0xd0,
+ 0x05, 0x17, 0xfe, 0xf4, 0x05, 0xfe, 0xe2, 0x08, 0x01, 0x38, 0x06, 0xfe, 0x1c, 0x00, 0x4d, 0x01,
+ 0xa7, 0x2e, 0x07, 0x20, 0xe4, 0x47, 0xfe, 0x27, 0x01, 0x01, 0x0c, 0x06, 0x28, 0xfe, 0x24, 0x12,
+ 0x3e, 0x01, 0x84, 0x1f, 0x7f, 0x01, 0x0c, 0x06, 0x07, 0x4d, 0x1f, 0xfe, 0x0d, 0x00, 0x01, 0x42,
+ 0x8f, 0xfe, 0xa4, 0x0e, 0x05, 0x29, 0x03, 0xe6, 0x1e, 0xfe, 0xca, 0x13, 0x03, 0xb6, 0x1e, 0xfe,
+ 0x40, 0x12, 0x03, 0x66, 0x1e, 0xfe, 0x38, 0x13, 0x3e, 0x01, 0x84, 0x17, 0xfe, 0x72, 0x06, 0x0a,
+ 0x07, 0x01, 0x38, 0x06, 0x24, 0xfe, 0x02, 0x12, 0x4f, 0x01, 0xfe, 0x56, 0x19, 0x16, 0xfe, 0x68,
+ 0x06, 0x15, 0x82, 0x01, 0x41, 0x15, 0xe2, 0x03, 0x66, 0x8a, 0x10, 0x66, 0x03, 0x9a, 0x1e, 0xfe,
+ 0x70, 0x12, 0x03, 0x55, 0x1e, 0xfe, 0x68, 0x13, 0x01, 0xc6, 0x09, 0x12, 0x48, 0xfe, 0x92, 0x06,
+ 0x2e, 0x12, 0x01, 0xfe, 0xac, 0x1d, 0xfe, 0x43, 0x48, 0x62, 0x80, 0x13, 0x58, 0xff, 0x02, 0x00,
+ 0x57, 0x52, 0xad, 0x23, 0x3f, 0x4e, 0x62, 0x49, 0x3e, 0x01, 0x84, 0x17, 0xfe, 0xea, 0x06, 0x01,
+ 0x38, 0x06, 0x12, 0xf7, 0x45, 0x0a, 0x95, 0x01, 0xfe, 0x84, 0x19, 0x16, 0xfe, 0xe0, 0x06, 0x15,
+ 0x82, 0x01, 0x41, 0x15, 0xe2, 0x03, 0x55, 0x8a, 0x10, 0x55, 0x1c, 0x07, 0x01, 0x84, 0xfe, 0xae,
+ 0x10, 0x03, 0x6f, 0x1e, 0xfe, 0x9e, 0x13, 0x3e, 0x01, 0x84, 0x03, 0x9a, 0x1e, 0xfe, 0x1a, 0x12,
+ 0x01, 0x38, 0x06, 0x12, 0xfc, 0x01, 0xc6, 0x01, 0xfe, 0xac, 0x1d, 0xfe, 0x43, 0x48, 0x62, 0x80,
+ 0xf0, 0x45, 0x0a, 0x95, 0x03, 0xb6, 0x1e, 0xf8, 0x01, 0x38, 0x06, 0x24, 0x36, 0xfe, 0x02, 0xf6,
+ 0x07, 0x71, 0x78, 0x8c, 0x00, 0x4d, 0x62, 0x49, 0x3e, 0x2d, 0x93, 0x4e, 0xd0, 0x0d, 0x17, 0xfe,
+ 0x9a, 0x07, 0x01, 0xfe, 0xc0, 0x19, 0x16, 0xfe, 0x90, 0x07, 0x26, 0x20, 0x9e, 0x15, 0x82, 0x01,
+ 0x41, 0x15, 0xe2, 0x21, 0x9e, 0x09, 0x07, 0xfb, 0x03, 0xe6, 0xfe, 0x58, 0x57, 0x10, 0xe6, 0x05,
+ 0xfe, 0x2a, 0x06, 0x03, 0x6f, 0x8a, 0x10, 0x6f, 0x1c, 0x07, 0x01, 0x84, 0xfe, 0x9c, 0x32, 0x5f,
+ 0x75, 0x01, 0xa6, 0x86, 0x15, 0xfe, 0xe2, 0x00, 0x2f, 0xed, 0x2a, 0x3c, 0xfe, 0x0a, 0xf0, 0xfe,
+ 0xce, 0x07, 0xae, 0xfe, 0x96, 0x08, 0xfe, 0x06, 0xf0, 0xfe, 0x9e, 0x08, 0xaf, 0xa0, 0x05, 0x29,
+ 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x2e, 0x12, 0x14, 0x1d, 0x01, 0x08, 0x14, 0x00, 0x01, 0x08, 0x14,
+ 0x00, 0x01, 0x08, 0x14, 0x00, 0x01, 0x08, 0xfe, 0x99, 0xa4, 0x01, 0x08, 0x14, 0x00, 0x05, 0xfe,
+ 0xc6, 0x09, 0x01, 0x76, 0x06, 0x12, 0xfe, 0x3a, 0x12, 0x01, 0x0c, 0x06, 0x12, 0xfe, 0x30, 0x13,
+ 0x14, 0xfe, 0x1b, 0x00, 0x01, 0x08, 0x14, 0x00, 0x01, 0x08, 0x14, 0x00, 0x01, 0x08, 0x14, 0x00,
+ 0x01, 0x08, 0x14, 0x07, 0x01, 0x08, 0x14, 0x00, 0x05, 0xef, 0x7c, 0x4a, 0x78, 0x4f, 0x0f, 0xfe,
+ 0x9a, 0x81, 0x04, 0xfe, 0x9a, 0x83, 0xfe, 0xcb, 0x47, 0x0b, 0x0e, 0x2d, 0x28, 0x48, 0xfe, 0x6c,
+ 0x08, 0x0a, 0x28, 0xfe, 0x09, 0x6f, 0xca, 0xfe, 0xca, 0x45, 0xfe, 0x32, 0x12, 0x53, 0x63, 0x4e,
+ 0x7c, 0x97, 0x2f, 0xfe, 0x7e, 0x08, 0x2a, 0x3c, 0xfe, 0x0a, 0xf0, 0xfe, 0x6c, 0x08, 0xaf, 0xa0,
+ 0xae, 0xfe, 0x96, 0x08, 0x05, 0x29, 0x01, 0x41, 0x05, 0xed, 0x14, 0x24, 0x05, 0xed, 0xfe, 0x9c,
+ 0xf7, 0x9f, 0x01, 0xfe, 0xae, 0x1e, 0xfe, 0x18, 0x58, 0x01, 0xfe, 0xbe, 0x1e, 0xfe, 0x99, 0x58,
+ 0xfe, 0x78, 0x18, 0xfe, 0xf9, 0x18, 0x8e, 0xfe, 0x16, 0x09, 0x10, 0x6a, 0x22, 0x6b, 0x01, 0x0c,
+ 0x61, 0x54, 0x44, 0x21, 0x2c, 0x09, 0x1a, 0xf8, 0x77, 0x01, 0xfe, 0x7e, 0x1e, 0x47, 0x2c, 0x7a,
+ 0x30, 0xf0, 0xfe, 0x83, 0xe7, 0xfe, 0x3f, 0x00, 0x71, 0xfe, 0x03, 0x40, 0x01, 0x0c, 0x61, 0x65,
+ 0x44, 0x01, 0xc2, 0xc8, 0xfe, 0x1f, 0x40, 0x20, 0x6e, 0x01, 0xfe, 0x6a, 0x16, 0xfe, 0x08, 0x50,
+ 0xfe, 0x8a, 0x50, 0xfe, 0x44, 0x51, 0xfe, 0xc6, 0x51, 0xfe, 0x10, 0x10, 0x01, 0xfe, 0xce, 0x1e,
+ 0x01, 0xfe, 0xde, 0x1e, 0x10, 0x68, 0x22, 0x69, 0x01, 0xfe, 0xee, 0x1e, 0x01, 0xfe, 0xfe, 0x1e,
+ 0xfe, 0x40, 0x50, 0xfe, 0xc2, 0x50, 0x10, 0x4b, 0x22, 0x4c, 0xfe, 0x8a, 0x10, 0x01, 0x0c, 0x06,
+ 0x54, 0xfe, 0x50, 0x12, 0x01, 0xfe, 0xae, 0x1e, 0x01, 0xfe, 0xbe, 0x1e, 0x10, 0x6a, 0x22, 0x6b,
+ 0x01, 0x0c, 0x06, 0x65, 0x4e, 0x01, 0xc2, 0x0f, 0xfe, 0x1f, 0x80, 0x04, 0xfe, 0x9f, 0x83, 0x33,
+ 0x0b, 0x0e, 0x20, 0x6e, 0x0f, 0xfe, 0x44, 0x90, 0x04, 0xfe, 0xc4, 0x93, 0x3a, 0x0b, 0xfe, 0xc6,
+ 0x90, 0x04, 0xfe, 0xc6, 0x93, 0x79, 0x0b, 0x0e, 0x10, 0x6c, 0x22, 0x6d, 0x01, 0xfe, 0xce, 0x1e,
+ 0x01, 0xfe, 0xde, 0x1e, 0x10, 0x68, 0x22, 0x69, 0x0f, 0xfe, 0x40, 0x90, 0x04, 0xfe, 0xc0, 0x93,
+ 0x3a, 0x0b, 0xfe, 0xc2, 0x90, 0x04, 0xfe, 0xc2, 0x93, 0x79, 0x0b, 0x0e, 0x10, 0x4b, 0x22, 0x4c,
+ 0x10, 0x64, 0x22, 0x34, 0x01, 0x0c, 0x61, 0x24, 0x44, 0x37, 0x13, 0xfe, 0x4e, 0x11, 0x2f, 0xfe,
+ 0xde, 0x09, 0xfe, 0x9e, 0xf0, 0xfe, 0xf2, 0x09, 0xfe, 0x01, 0x48, 0x1b, 0x3c, 0x37, 0x88, 0xf5,
+ 0xd4, 0xfe, 0x1e, 0x0a, 0xd5, 0xfe, 0x42, 0x0a, 0xd2, 0xfe, 0x1e, 0x0a, 0xd3, 0xfe, 0x42, 0x0a,
+ 0xae, 0xfe, 0x12, 0x0a, 0xfe, 0x06, 0xf0, 0xfe, 0x18, 0x0a, 0xaf, 0xa0, 0x05, 0x29, 0x01, 0x41,
+ 0xfe, 0xc1, 0x10, 0x14, 0x24, 0xfe, 0xc1, 0x10, 0x01, 0x76, 0x06, 0x07, 0xfe, 0x14, 0x12, 0x01,
+ 0x76, 0x06, 0x0d, 0x5d, 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x74, 0x12, 0xfe, 0x2e, 0x1c, 0x05, 0xfe,
+ 0x1a, 0x0c, 0x01, 0x76, 0x06, 0x07, 0x5d, 0x01, 0x76, 0x06, 0x0d, 0x41, 0xfe, 0x2c, 0x1c, 0xfe,
+ 0xaa, 0xf0, 0xfe, 0xce, 0x0a, 0xfe, 0xac, 0xf0, 0xfe, 0x66, 0x0a, 0xfe, 0x92, 0x10, 0xc4, 0xf6,
+ 0xfe, 0xad, 0xf0, 0xfe, 0x72, 0x0a, 0x05, 0xfe, 0x1a, 0x0c, 0xc5, 0xfe, 0xe7, 0x10, 0xfe, 0x2b,
+ 0xf0, 0xbf, 0xfe, 0x6b, 0x18, 0x23, 0xfe, 0x00, 0xfe, 0xfe, 0x1c, 0x12, 0xac, 0xfe, 0xd2, 0xf0,
+ 0xbf, 0xfe, 0x76, 0x18, 0x23, 0x1d, 0x1b, 0xbf, 0x03, 0xe3, 0x23, 0x07, 0x1b, 0xbf, 0xd4, 0x5b,
+ 0xd5, 0x5b, 0xd2, 0x5b, 0xd3, 0x5b, 0xc4, 0xc5, 0xfe, 0xa9, 0x10, 0x75, 0x5e, 0x32, 0x1f, 0x7f,
+ 0x01, 0x42, 0x19, 0xfe, 0x35, 0x00, 0xfe, 0x01, 0xf0, 0x70, 0x19, 0x98, 0x05, 0x70, 0xfe, 0x74,
+ 0x18, 0x23, 0xfe, 0x00, 0xf8, 0x1b, 0x5b, 0x7d, 0x12, 0x01, 0xfe, 0x78, 0x0f, 0x4d, 0x01, 0xfe,
+ 0x96, 0x1a, 0x21, 0x30, 0x77, 0x7d, 0x1d, 0x05, 0x5b, 0x01, 0x0c, 0x06, 0x0d, 0x2b, 0xfe, 0xe2,
+ 0x0b, 0x01, 0x0c, 0x06, 0x54, 0xfe, 0xa6, 0x12, 0x01, 0x0c, 0x06, 0x24, 0xfe, 0x88, 0x13, 0x21,
+ 0x6e, 0xc7, 0x01, 0xfe, 0x1e, 0x1f, 0x0f, 0xfe, 0x83, 0x80, 0x04, 0xfe, 0x83, 0x83, 0xfe, 0xc9,
+ 0x47, 0x0b, 0x0e, 0xfe, 0xc8, 0x44, 0xfe, 0x42, 0x13, 0x0f, 0xfe, 0x04, 0x91, 0x04, 0xfe, 0x84,
+ 0x93, 0xfe, 0xca, 0x57, 0x0b, 0xfe, 0x86, 0x91, 0x04, 0xfe, 0x86, 0x93, 0xfe, 0xcb, 0x57, 0x0b,
+ 0x0e, 0x7a, 0x30, 0xfe, 0x40, 0x59, 0xfe, 0xc1, 0x59, 0x8e, 0x40, 0x03, 0x6a, 0x3b, 0x6b, 0x10,
+ 0x97, 0x22, 0x98, 0xd9, 0x6a, 0xda, 0x6b, 0x01, 0xc2, 0xc8, 0x7a, 0x30, 0x20, 0x6e, 0xdb, 0x64,
+ 0xdc, 0x34, 0x91, 0x6c, 0x7e, 0x6d, 0xfe, 0x44, 0x55, 0xfe, 0xe5, 0x55, 0xfe, 0x04, 0xfa, 0x64,
+ 0xfe, 0x05, 0xfa, 0x34, 0x01, 0xfe, 0x6a, 0x16, 0xa3, 0x26, 0x10, 0x97, 0x10, 0x98, 0x91, 0x6c,
+ 0x7e, 0x6d, 0xfe, 0x14, 0x10, 0x01, 0x0c, 0x06, 0x24, 0x1b, 0x40, 0x91, 0x4b, 0x7e, 0x4c, 0x01,
+ 0x0c, 0x06, 0xfe, 0xf7, 0x00, 0x44, 0x03, 0x68, 0x3b, 0x69, 0xfe, 0x10, 0x58, 0xfe, 0x91, 0x58,
+ 0xfe, 0x14, 0x59, 0xfe, 0x95, 0x59, 0x05, 0x5b, 0x01, 0x0c, 0x06, 0x24, 0x1b, 0x40, 0x01, 0x0c,
+ 0x06, 0xfe, 0xf7, 0x00, 0x44, 0x78, 0x01, 0xfe, 0x8e, 0x1e, 0x4f, 0x0f, 0xfe, 0x10, 0x90, 0x04,
+ 0xfe, 0x90, 0x93, 0x3a, 0x0b, 0xfe, 0x92, 0x90, 0x04, 0xfe, 0x92, 0x93, 0x79, 0x0b, 0x0e, 0xfe,
+ 0xbd, 0x10, 0x01, 0x43, 0x09, 0xbb, 0x1b, 0xfe, 0x6e, 0x0a, 0x15, 0xbb, 0x01, 0x0c, 0x06, 0x0d,
+ 0xfe, 0x14, 0x13, 0x03, 0x4b, 0x3b, 0x4c, 0x8e, 0xfe, 0x6e, 0x0a, 0xfe, 0x0c, 0x58, 0xfe, 0x8d,
+ 0x58, 0x05, 0x5b, 0x26, 0x3e, 0x0f, 0xfe, 0x19, 0x80, 0x04, 0xfe, 0x99, 0x83, 0x33, 0x0b, 0x0e,
+ 0xfe, 0xe5, 0x10, 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x1a, 0x12, 0xfe, 0x6c, 0x19, 0xfe, 0x19, 0x41,
+ 0xfe, 0x6b, 0x18, 0xac, 0xfe, 0xd1, 0xf0, 0xef, 0x1f, 0x92, 0x01, 0x42, 0x19, 0xfe, 0x44, 0x00,
+ 0xfe, 0x90, 0x10, 0xfe, 0x6c, 0x19, 0xd9, 0x4b, 0xfe, 0xed, 0x19, 0xda, 0x4c, 0xfe, 0x0c, 0x51,
+ 0xfe, 0x8e, 0x51, 0xfe, 0x6b, 0x18, 0x23, 0xfe, 0x00, 0xff, 0x31, 0xfe, 0x76, 0x10, 0xac, 0xfe,
+ 0xd2, 0xf0, 0xfe, 0xba, 0x0c, 0xfe, 0x76, 0x18, 0x23, 0x1d, 0x5d, 0x03, 0xe3, 0x23, 0x07, 0xfe,
+ 0x08, 0x13, 0x19, 0xfe, 0x16, 0x00, 0x05, 0x70, 0xfe, 0xd1, 0xf0, 0xfe, 0xcc, 0x0c, 0x1f, 0x92,
+ 0x01, 0x42, 0x19, 0xfe, 0x17, 0x00, 0x5c, 0xfe, 0xce, 0xf0, 0xfe, 0xd2, 0x0c, 0xfe, 0x3e, 0x10,
+ 0xfe, 0xcd, 0xf0, 0xfe, 0xde, 0x0c, 0x19, 0xfe, 0x22, 0x00, 0x05, 0x70, 0xfe, 0xcb, 0xf0, 0xfe,
+ 0xea, 0x0c, 0x19, 0xfe, 0x24, 0x00, 0x05, 0x70, 0xfe, 0xd0, 0xf0, 0xfe, 0xf4, 0x0c, 0x19, 0x94,
+ 0xfe, 0x1c, 0x10, 0xfe, 0xcf, 0xf0, 0xfe, 0xfe, 0x0c, 0x19, 0x4a, 0xf3, 0xfe, 0xcc, 0xf0, 0xef,
+ 0x01, 0x76, 0x06, 0x24, 0x4d, 0x19, 0xfe, 0x12, 0x00, 0x37, 0x13, 0xfe, 0x4e, 0x11, 0x2f, 0xfe,
+ 0x16, 0x0d, 0xfe, 0x9e, 0xf0, 0xfe, 0x2a, 0x0d, 0xfe, 0x01, 0x48, 0x1b, 0x3c, 0x37, 0x88, 0xf5,
+ 0xd4, 0x29, 0xd5, 0x29, 0xd2, 0x29, 0xd3, 0x29, 0x37, 0xfe, 0x9c, 0x32, 0x2f, 0xfe, 0x3e, 0x0d,
+ 0x2a, 0x3c, 0xae, 0xfe, 0x62, 0x0d, 0xaf, 0xa0, 0xd4, 0x9f, 0xd5, 0x9f, 0xd2, 0x9f, 0xd3, 0x9f,
+ 0x05, 0x29, 0x01, 0x41, 0xfe, 0xd3, 0x10, 0x15, 0xfe, 0xe8, 0x00, 0xc4, 0xc5, 0x75, 0xd7, 0x99,
+ 0xd8, 0x9c, 0xfe, 0x89, 0xf0, 0x29, 0x27, 0x25, 0xbe, 0xd7, 0x99, 0xd8, 0x9c, 0x2f, 0xfe, 0x8c,
+ 0x0d, 0x16, 0x29, 0x27, 0x25, 0xbd, 0xfe, 0x01, 0x48, 0xa4, 0x19, 0xfe, 0x42, 0x00, 0x05, 0x70,
+ 0x90, 0x07, 0xfe, 0x81, 0x49, 0x1b, 0xfe, 0x64, 0x0e, 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x44, 0x13,
+ 0x19, 0x00, 0x2d, 0x0d, 0xfe, 0x54, 0x12, 0x2d, 0xfe, 0x28, 0x00, 0x2b, 0xfe, 0xda, 0x0e, 0x0a,
+ 0x57, 0x01, 0x18, 0x09, 0x00, 0x36, 0x46, 0xfe, 0x28, 0x00, 0xfe, 0xfa, 0x10, 0x01, 0xfe, 0xf4,
+ 0x1c, 0x01, 0xfe, 0x00, 0x1d, 0x0a, 0xba, 0x01, 0xfe, 0x58, 0x10, 0x40, 0x15, 0x56, 0x01, 0x85,
+ 0x05, 0x35, 0x19, 0xfe, 0x44, 0x00, 0x2d, 0x0d, 0xf7, 0x46, 0x0d, 0xfe, 0xcc, 0x10, 0x01, 0xa7,
+ 0x46, 0x0d, 0xfe, 0xc2, 0x10, 0x01, 0xa7, 0x0f, 0xfe, 0x19, 0x82, 0x04, 0xfe, 0x99, 0x83, 0xfe,
+ 0xcc, 0x47, 0x0b, 0x0e, 0xfe, 0x34, 0x46, 0xa5, 0x46, 0x0d, 0x19, 0xfe, 0x43, 0x00, 0xfe, 0xa2,
+ 0x10, 0x01, 0x0c, 0x61, 0x0d, 0x44, 0x01, 0xfe, 0xf4, 0x1c, 0x01, 0xfe, 0x00, 0x1d, 0x40, 0x15,
+ 0x56, 0x01, 0x85, 0x7d, 0x0d, 0x40, 0x51, 0x01, 0xfe, 0x9e, 0x1e, 0x05, 0xfe, 0x3a, 0x03, 0x01,
+ 0x0c, 0x06, 0x0d, 0x5d, 0x46, 0x0d, 0x19, 0x00, 0xfe, 0x62, 0x10, 0x01, 0x76, 0x06, 0x12, 0xfe,
+ 0x5c, 0x12, 0x01, 0x0c, 0x06, 0x12, 0xfe, 0x52, 0x13, 0xfe, 0x1c, 0x1c, 0xfe, 0x9d, 0xf0, 0xfe,
+ 0x8e, 0x0e, 0xfe, 0x1c, 0x1c, 0xfe, 0x9d, 0xf0, 0xfe, 0x94, 0x0e, 0x01, 0x0c, 0x61, 0x12, 0x44,
+ 0xfe, 0x9f, 0x10, 0x19, 0xfe, 0x15, 0x00, 0xfe, 0x04, 0xe6, 0x0d, 0x4f, 0xfe, 0x2e, 0x10, 0x19,
+ 0xfe, 0x13, 0x00, 0xfe, 0x10, 0x10, 0x19, 0xfe, 0x47, 0x00, 0xf1, 0x19, 0xfe, 0x41, 0x00, 0xa2,
+ 0x19, 0xfe, 0x24, 0x00, 0x86, 0xc4, 0xc5, 0x75, 0x03, 0x81, 0x1e, 0x2b, 0xea, 0x4f, 0xfe, 0x04,
+ 0xe6, 0x12, 0xfe, 0x9d, 0x41, 0xfe, 0x1c, 0x42, 0x40, 0x01, 0xf4, 0x05, 0x35, 0xfe, 0x12, 0x1c,
+ 0x1f, 0x0d, 0x47, 0xb5, 0xc3, 0x1f, 0xfe, 0x31, 0x00, 0x47, 0xb8, 0x01, 0xfe, 0xd4, 0x11, 0x05,
+ 0xe9, 0x51, 0xfe, 0x06, 0xec, 0xe0, 0xfe, 0x0e, 0x47, 0x46, 0x28, 0xfe, 0xce, 0x45, 0x31, 0x51,
+ 0xfe, 0x06, 0xea, 0xe0, 0xfe, 0x47, 0x4b, 0x45, 0xfe, 0x75, 0x57, 0x03, 0x67, 0xfe, 0x98, 0x56,
+ 0xfe, 0x38, 0x12, 0x0a, 0x5a, 0x01, 0x18, 0xfe, 0x44, 0x48, 0x60, 0x01, 0x0c, 0x06, 0x28, 0xfe,
+ 0x18, 0x13, 0x0a, 0x57, 0x01, 0x18, 0x3e, 0xfe, 0x41, 0x58, 0x0a, 0xba, 0xfe, 0xfa, 0x14, 0xfe,
+ 0x49, 0x54, 0xb0, 0xfe, 0x5e, 0x0f, 0x05, 0xfe, 0x3a, 0x03, 0x0a, 0x67, 0xfe, 0xe0, 0x14, 0xfe,
+ 0x0e, 0x47, 0x46, 0x28, 0xfe, 0xce, 0x45, 0x31, 0x51, 0xfe, 0xce, 0x47, 0xfe, 0xad, 0x13, 0x05,
+ 0x35, 0x21, 0x2c, 0x09, 0x1a, 0xfe, 0x98, 0x12, 0x26, 0x20, 0x96, 0x20, 0xe7, 0xfe, 0x08, 0x1c,
+ 0xfe, 0x7c, 0x19, 0xfe, 0xfd, 0x19, 0xfe, 0x0a, 0x1c, 0x03, 0xe5, 0xfe, 0x48, 0x55, 0xa5, 0x3b,
+ 0xfe, 0x62, 0x01, 0xfe, 0xc9, 0x55, 0x31, 0xfe, 0x74, 0x10, 0x01, 0xfe, 0xf0, 0x1a, 0x03, 0xfe,
+ 0x38, 0x01, 0x3b, 0xfe, 0x3a, 0x01, 0x8e, 0xfe, 0x1e, 0x10, 0xfe, 0x02, 0xec, 0xe7, 0x53, 0x00,
+ 0x36, 0xfe, 0x04, 0xec, 0x2c, 0x60, 0xfe, 0x05, 0xf6, 0xfe, 0x34, 0x01, 0x01, 0xfe, 0x62, 0x1b,
+ 0x01, 0xfe, 0xce, 0x1e, 0xb2, 0x11, 0xfe, 0x18, 0x13, 0xca, 0xfe, 0x02, 0xea, 0xe7, 0x53, 0x92,
+ 0xfe, 0xc3, 0x13, 0x1f, 0x12, 0x47, 0xb5, 0xc3, 0xfe, 0x2a, 0x10, 0x03, 0xfe, 0x38, 0x01, 0x23,
+ 0xfe, 0xf0, 0xff, 0x10, 0xe5, 0x03, 0xfe, 0x3a, 0x01, 0x10, 0xfe, 0x62, 0x01, 0x01, 0xfe, 0x1e,
+ 0x1e, 0x20, 0x2c, 0x15, 0x56, 0x01, 0xfe, 0x9e, 0x1e, 0x13, 0x07, 0x02, 0x26, 0x02, 0x21, 0x96,
+ 0xc7, 0x20, 0x96, 0x09, 0x92, 0xfe, 0x79, 0x13, 0x1f, 0x1d, 0x47, 0xb5, 0xc3, 0xfe, 0xe1, 0x10,
+ 0xcf, 0xfe, 0x03, 0xdc, 0xfe, 0x73, 0x57, 0xfe, 0x80, 0x5d, 0x02, 0xcf, 0xfe, 0x03, 0xdc, 0xfe,
+ 0x5b, 0x57, 0xfe, 0x80, 0x5d, 0x02, 0xfe, 0x03, 0x57, 0xcf, 0x26, 0xfe, 0x00, 0xcc, 0x02, 0xfe,
+ 0x03, 0x57, 0xcf, 0x89, 0x02, 0x01, 0x0c, 0x06, 0x4a, 0xfe, 0x4e, 0x13, 0x0f, 0xfe, 0x1c, 0x80,
+ 0x04, 0xfe, 0x9c, 0x83, 0x33, 0x0b, 0x0e, 0x09, 0x07, 0xfe, 0x3a, 0x13, 0x0f, 0xfe, 0x1e, 0x80,
+ 0x04, 0xfe, 0x9e, 0x83, 0x33, 0x0b, 0x0e, 0xfe, 0x2a, 0x13, 0x0f, 0xfe, 0x1d, 0x80, 0x04, 0xfe,
+ 0x9d, 0x83, 0xfe, 0xf9, 0x13, 0x0e, 0xfe, 0x1c, 0x13, 0x01, 0xfe, 0xee, 0x1e, 0xac, 0xfe, 0x14,
+ 0x13, 0x01, 0xfe, 0xfe, 0x1e, 0xfe, 0x81, 0x58, 0xfa, 0x01, 0xfe, 0x0e, 0x1f, 0xfe, 0x30, 0xf4,
+ 0x0d, 0xfe, 0x3c, 0x50, 0xa2, 0x01, 0xfe, 0x92, 0x1b, 0x01, 0x43, 0x09, 0x56, 0xfb, 0x01, 0xfe,
+ 0xc8, 0x1a, 0x01, 0x0c, 0x06, 0x28, 0xa4, 0x01, 0xfe, 0xf4, 0x1c, 0x01, 0xfe, 0x00, 0x1d, 0x15,
+ 0xfe, 0xe9, 0x00, 0x01, 0x0c, 0x06, 0x4a, 0xfe, 0x4e, 0x13, 0x01, 0xfe, 0x22, 0x1b, 0xfe, 0x1e,
+ 0x1c, 0x0f, 0xfe, 0x14, 0x90, 0x04, 0xfe, 0x94, 0x93, 0x3a, 0x0b, 0xfe, 0x96, 0x90, 0x04, 0xfe,
+ 0x96, 0x93, 0x79, 0x0b, 0x0e, 0x10, 0xfe, 0x64, 0x01, 0x22, 0xfe, 0x66, 0x01, 0x01, 0x0c, 0x06,
+ 0x65, 0xf9, 0x0f, 0xfe, 0x03, 0x80, 0x04, 0xfe, 0x83, 0x83, 0x33, 0x0b, 0x0e, 0x77, 0xfe, 0x01,
+ 0xec, 0x2c, 0xfe, 0x80, 0x40, 0x20, 0x2c, 0x7a, 0x30, 0x15, 0xdf, 0x40, 0x21, 0x2c, 0xfe, 0x00,
+ 0x40, 0x8d, 0x2c, 0x02, 0xfe, 0x08, 0x1c, 0x03, 0xfe, 0xac, 0x00, 0xfe, 0x06, 0x58, 0x03, 0xfe,
+ 0xae, 0x00, 0xfe, 0x07, 0x58, 0x03, 0xfe, 0xb0, 0x00, 0xfe, 0x08, 0x58, 0x03, 0xfe, 0xb2, 0x00,
+ 0xfe, 0x09, 0x58, 0xfe, 0x0a, 0x1c, 0x2e, 0x49, 0x20, 0xe0, 0x26, 0x10, 0x66, 0x10, 0x55, 0x10,
+ 0x6f, 0x13, 0x57, 0x52, 0x4f, 0x1c, 0x28, 0xfe, 0x90, 0x4d, 0xfe, 0x91, 0x54, 0x2b, 0xfe, 0x88,
+ 0x11, 0x46, 0x1a, 0x13, 0x5a, 0x52, 0x1c, 0x4a, 0xfe, 0x90, 0x4d, 0xfe, 0x91, 0x54, 0x2b, 0xfe,
+ 0x9e, 0x11, 0x2e, 0x1a, 0x20, 0x2c, 0x90, 0x34, 0x60, 0x21, 0x2c, 0xfe, 0x00, 0x40, 0x8d, 0x2c,
+ 0x15, 0xdf, 0xfe, 0x14, 0x56, 0xfe, 0xd6, 0xf0, 0xfe, 0xb2, 0x11, 0xfe, 0x12, 0x1c, 0x75, 0xfe,
+ 0x14, 0x1c, 0xfe, 0x10, 0x1c, 0xfe, 0x18, 0x1c, 0x02, 0x51, 0xfe, 0x0c, 0x14, 0xfe, 0x0e, 0x47,
+ 0xfe, 0x07, 0xe6, 0x28, 0xfe, 0xce, 0x47, 0xfe, 0xf5, 0x13, 0x02, 0x01, 0xa7, 0x90, 0x34, 0x60,
+ 0xfe, 0x06, 0x80, 0xfe, 0x48, 0x47, 0xfe, 0x42, 0x13, 0xfe, 0x02, 0x80, 0x09, 0x56, 0xfe, 0x34,
+ 0x13, 0x0a, 0x5a, 0x01, 0x18, 0xcb, 0xfe, 0x36, 0x12, 0xfe, 0x41, 0x48, 0xfe, 0x45, 0x48, 0x01,
+ 0xfe, 0xb2, 0x16, 0xfe, 0x00, 0xcc, 0xcb, 0xfe, 0xf3, 0x13, 0x3f, 0x89, 0x09, 0x1a, 0xa5, 0x0a,
+ 0x9d, 0x01, 0x18, 0xfe, 0x80, 0x5c, 0x01, 0x85, 0xf2, 0x09, 0x9b, 0xa4, 0xfe, 0x14, 0x56, 0xfe,
+ 0xd6, 0xf0, 0xfe, 0xec, 0x11, 0x02, 0xfe, 0x44, 0x58, 0x77, 0xfe, 0x01, 0xec, 0xb8, 0xfe, 0x9e,
+ 0x40, 0xfe, 0x9d, 0xe7, 0x00, 0xfe, 0x9c, 0xe7, 0x12, 0x8d, 0x30, 0x01, 0xf4, 0xfe, 0xdd, 0x10,
+ 0x37, 0xd7, 0x99, 0xd8, 0x9c, 0x27, 0x25, 0xee, 0x09, 0x12, 0xfe, 0x48, 0x12, 0x09, 0x0d, 0xfe,
+ 0x56, 0x12, 0x09, 0x1d, 0xfe, 0x30, 0x12, 0x09, 0xdd, 0x1b, 0xfe, 0xc4, 0x13, 0x09, 0xfe, 0x23,
+ 0x00, 0x1b, 0xfe, 0xd0, 0x13, 0x09, 0x07, 0x1b, 0xfe, 0x34, 0x14, 0x09, 0x24, 0xfe, 0x12, 0x12,
+ 0x09, 0x00, 0x1b, 0x29, 0x1f, 0xdd, 0x01, 0x42, 0xa1, 0x32, 0x01, 0x08, 0xae, 0x41, 0x02, 0x32,
+ 0xfe, 0x62, 0x08, 0x0a, 0xe1, 0x01, 0xfe, 0x58, 0x10, 0x15, 0x9b, 0x05, 0x35, 0x32, 0x01, 0x43,
+ 0x09, 0xbb, 0xfe, 0xd7, 0x13, 0x91, 0x4b, 0x7e, 0x4c, 0x8e, 0xfe, 0x80, 0x13, 0x01, 0x0c, 0x06,
+ 0x54, 0xfe, 0x72, 0x12, 0xdb, 0x64, 0xdc, 0x34, 0xfe, 0x44, 0x55, 0xfe, 0xe5, 0x55, 0xb0, 0xfe,
+ 0x4a, 0x13, 0x21, 0x6e, 0xfe, 0x26, 0x13, 0x03, 0x97, 0x3b, 0x98, 0x8e, 0xfe, 0xb6, 0x0e, 0x10,
+ 0x6a, 0x22, 0x6b, 0x26, 0x10, 0x97, 0x10, 0x98, 0x01, 0xc2, 0x2e, 0x49, 0x88, 0x20, 0x6e, 0x01,
+ 0xfe, 0x6a, 0x16, 0xdb, 0x64, 0xdc, 0x34, 0xfe, 0x04, 0x55, 0xfe, 0xa5, 0x55, 0xfe, 0x04, 0xfa,
+ 0x64, 0xfe, 0x05, 0xfa, 0x34, 0xfe, 0x8f, 0x10, 0x03, 0x6c, 0x3b, 0x6d, 0xfe, 0x40, 0x56, 0xfe,
+ 0xe1, 0x56, 0x10, 0x6c, 0x22, 0x6d, 0x71, 0xdb, 0x64, 0xdc, 0x34, 0xfe, 0x44, 0x55, 0xfe, 0xe5,
+ 0x55, 0x03, 0x68, 0x3b, 0x69, 0xfe, 0x00, 0x56, 0xfe, 0xa1, 0x56, 0x10, 0x68, 0x22, 0x69, 0x01,
+ 0x0c, 0x06, 0x54, 0xf9, 0x21, 0x6e, 0xfe, 0x1f, 0x40, 0x03, 0x6a, 0x3b, 0x6b, 0xfe, 0x2c, 0x50,
+ 0xfe, 0xae, 0x50, 0x03, 0x6c, 0x3b, 0x6d, 0xfe, 0x44, 0x50, 0xfe, 0xc6, 0x50, 0x03, 0x68, 0x3b,
+ 0x69, 0xfe, 0x08, 0x50, 0xfe, 0x8a, 0x50, 0x03, 0x4b, 0x3b, 0x4c, 0xfe, 0x40, 0x50, 0xfe, 0xc2,
+ 0x50, 0x05, 0x73, 0x2e, 0x07, 0x20, 0x9e, 0x05, 0x72, 0x32, 0x01, 0x08, 0x16, 0x3d, 0x27, 0x25,
+ 0xee, 0x09, 0x07, 0x2b, 0x3d, 0x01, 0x43, 0x09, 0xbb, 0x2b, 0x72, 0x01, 0xa6, 0x23, 0x3f, 0x1b,
+ 0x3d, 0x01, 0x0c, 0x06, 0x0d, 0xfe, 0x1e, 0x13, 0x91, 0x4b, 0x7e, 0x4c, 0xfe, 0x0a, 0x55, 0x31,
+ 0xfe, 0x8b, 0x55, 0xd9, 0x4b, 0xda, 0x4c, 0xfe, 0x0c, 0x51, 0xfe, 0x8e, 0x51, 0x05, 0x72, 0x01,
+ 0xfe, 0x8e, 0x1e, 0xca, 0xfe, 0x19, 0x41, 0x05, 0x72, 0x32, 0x01, 0x08, 0x2a, 0x3c, 0x16, 0xc0,
+ 0x27, 0x25, 0xbe, 0x2d, 0x1d, 0xc0, 0x2d, 0x0d, 0x83, 0x2d, 0x7f, 0x1b, 0xfe, 0x66, 0x15, 0x05,
+ 0x3d, 0x01, 0x08, 0x2a, 0x3c, 0x16, 0xc0, 0x27, 0x25, 0xbd, 0x09, 0x1d, 0x2b, 0x3d, 0x01, 0x08,
+ 0x16, 0xc0, 0x27, 0x25, 0xfe, 0xe8, 0x09, 0xfe, 0xc2, 0x49, 0x50, 0x03, 0xb6, 0x1e, 0x83, 0x01,
+ 0x38, 0x06, 0x24, 0x31, 0xa1, 0xfe, 0xbb, 0x45, 0x2d, 0x00, 0xa4, 0x46, 0x07, 0x90, 0x3f, 0x01,
+ 0xfe, 0xf8, 0x15, 0x01, 0xa6, 0x86, 0xfe, 0x4b, 0x45, 0xfe, 0x20, 0x13, 0x01, 0x43, 0x09, 0x82,
+ 0xfe, 0x16, 0x13, 0x03, 0x9a, 0x1e, 0x5d, 0x03, 0x55, 0x1e, 0x31, 0x5e, 0x05, 0x72, 0xfe, 0xc0,
+ 0x5d, 0x01, 0xa7, 0xfe, 0x03, 0x17, 0x03, 0x66, 0x8a, 0x10, 0x66, 0x5e, 0x32, 0x01, 0x08, 0x17,
+ 0x73, 0x01, 0xfe, 0x56, 0x19, 0x05, 0x73, 0x01, 0x08, 0x2a, 0x3c, 0x16, 0x3d, 0x27, 0x25, 0xbd,
+ 0x09, 0x07, 0x2b, 0x3d, 0x01, 0xfe, 0xbe, 0x16, 0xfe, 0x42, 0x58, 0xfe, 0xe8, 0x14, 0x01, 0xa6,
+ 0x86, 0xfe, 0x4a, 0xf4, 0x0d, 0x1b, 0x3d, 0xfe, 0x4a, 0xf4, 0x07, 0xfe, 0x0e, 0x12, 0x01, 0x43,
+ 0x09, 0x82, 0x4e, 0x05, 0x72, 0x03, 0x55, 0x8a, 0x10, 0x55, 0x5e, 0x32, 0x01, 0x08, 0x17, 0x73,
+ 0x01, 0xfe, 0x84, 0x19, 0x05, 0x73, 0x01, 0x08, 0x2a, 0x3c, 0x16, 0x3d, 0x27, 0x25, 0xbd, 0x09,
+ 0x12, 0x2b, 0x3d, 0x01, 0xfe, 0xe8, 0x17, 0x8b, 0xfe, 0xaa, 0x14, 0xfe, 0xb6, 0x14, 0x86, 0xa8,
+ 0xb2, 0x0d, 0x1b, 0x3d, 0xb2, 0x07, 0xfe, 0x0e, 0x12, 0x01, 0x43, 0x09, 0x82, 0x4e, 0x05, 0x72,
+ 0x03, 0x6f, 0x8a, 0x10, 0x6f, 0x5e, 0x32, 0x01, 0x08, 0x17, 0x73, 0x01, 0xfe, 0xc0, 0x19, 0x05,
+ 0x73, 0x13, 0x07, 0x2f, 0xfe, 0xcc, 0x15, 0x17, 0xfe, 0xe2, 0x15, 0x5f, 0xcc, 0x01, 0x08, 0x26,
+ 0x5f, 0x02, 0x8f, 0xfe, 0xde, 0x15, 0x2a, 0xfe, 0xde, 0x15, 0x16, 0xfe, 0xcc, 0x15, 0x5e, 0x32,
+ 0x01, 0x08, 0xfe, 0xd5, 0x10, 0x13, 0x58, 0xff, 0x02, 0x00, 0x57, 0x52, 0xad, 0x23, 0xfe, 0xff,
+ 0x7f, 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x02, 0x13, 0x58, 0xff, 0x02, 0x00, 0x57, 0x52, 0xad,
+ 0x23, 0x3f, 0xfe, 0x30, 0x56, 0xfe, 0x00, 0x5c, 0x02, 0x13, 0x58, 0xff, 0x02, 0x00, 0x57, 0x52,
+ 0xad, 0x02, 0x13, 0x58, 0xff, 0x02, 0x00, 0x57, 0x52, 0xfe, 0x00, 0x5e, 0x02, 0x13, 0x58, 0xff,
+ 0x02, 0x00, 0x57, 0x52, 0xad, 0xfe, 0x0b, 0x58, 0x02, 0x0a, 0x66, 0x01, 0x5c, 0x0a, 0x55, 0x01,
+ 0x5c, 0x0a, 0x6f, 0x01, 0x5c, 0x02, 0x01, 0xfe, 0x1e, 0x1f, 0x23, 0x1a, 0xff, 0x03, 0x00, 0x54,
+ 0xfe, 0x00, 0xf4, 0x24, 0x52, 0x0f, 0xfe, 0x00, 0x7c, 0x04, 0xfe, 0x07, 0x7c, 0x3a, 0x0b, 0x0e,
+ 0xfe, 0x00, 0x71, 0xfe, 0xf9, 0x18, 0xfe, 0x7a, 0x19, 0xfe, 0xfb, 0x19, 0xfe, 0x1a, 0xf7, 0x00,
+ 0xfe, 0x1b, 0xf7, 0x00, 0x7a, 0x30, 0x10, 0x68, 0x22, 0x69, 0xd9, 0x6c, 0xda, 0x6d, 0x02, 0xfe,
+ 0x62, 0x08, 0xfe, 0x82, 0x4a, 0xfe, 0xe1, 0x1a, 0xfe, 0x83, 0x5a, 0x77, 0x02, 0x01, 0xc6, 0xfe,
+ 0x42, 0x48, 0x4f, 0x50, 0x45, 0x01, 0x08, 0x16, 0xfe, 0xe0, 0x17, 0x27, 0x25, 0xbe, 0x01, 0x08,
+ 0x16, 0xfe, 0xe0, 0x17, 0x27, 0x25, 0xfe, 0xe8, 0x0a, 0xfe, 0xc1, 0x59, 0x03, 0x9a, 0x1e, 0xfe,
+ 0xda, 0x12, 0x01, 0x38, 0x06, 0x12, 0xfe, 0xd0, 0x13, 0x26, 0x53, 0x12, 0x48, 0xfe, 0x08, 0x17,
+ 0xd1, 0x12, 0x53, 0x12, 0xfe, 0x1e, 0x13, 0x2d, 0xb4, 0x7b, 0xfe, 0x26, 0x17, 0x4d, 0x13, 0x07,
+ 0x1c, 0xb4, 0x90, 0x04, 0xfe, 0x78, 0x10, 0xff, 0x02, 0x83, 0x55, 0xf1, 0xff, 0x02, 0x83, 0x55,
+ 0x53, 0x1d, 0xfe, 0x12, 0x13, 0xd6, 0xfe, 0x30, 0x00, 0xb0, 0xfe, 0x80, 0x17, 0x1c, 0x63, 0x13,
+ 0x07, 0xfe, 0x56, 0x10, 0x53, 0x0d, 0xfe, 0x16, 0x13, 0xd6, 0xfe, 0x64, 0x00, 0xb0, 0xfe, 0x80,
+ 0x17, 0x0a, 0xfe, 0x64, 0x00, 0x1c, 0x94, 0x13, 0x07, 0xfe, 0x28, 0x10, 0x53, 0x07, 0xfe, 0x60,
+ 0x13, 0xd6, 0xfe, 0xc8, 0x00, 0xb0, 0xfe, 0x80, 0x17, 0x0a, 0xfe, 0xc8, 0x00, 0x1c, 0x95, 0x13,
+ 0x07, 0x71, 0xd6, 0xfe, 0x90, 0x01, 0x48, 0xfe, 0x8c, 0x17, 0x45, 0xf3, 0xfe, 0x43, 0xf4, 0x96,
+ 0xfe, 0x56, 0xf0, 0xfe, 0x9e, 0x17, 0xfe, 0x04, 0xf4, 0x58, 0xfe, 0x43, 0xf4, 0x94, 0xf6, 0x8b,
+ 0x01, 0xfe, 0x24, 0x16, 0x23, 0x3f, 0xfc, 0xa8, 0x8c, 0x49, 0x48, 0xfe, 0xda, 0x17, 0x62, 0x49,
+ 0xfe, 0x1c, 0x10, 0xa8, 0x8c, 0x80, 0x48, 0xfe, 0xda, 0x17, 0x62, 0x80, 0x71, 0x50, 0x26, 0xfe,
+ 0x4d, 0xf4, 0x00, 0xf7, 0x45, 0x13, 0x07, 0xfe, 0xb4, 0x56, 0xfe, 0xc3, 0x58, 0x02, 0x50, 0x13,
+ 0x0d, 0x02, 0x50, 0x3e, 0x78, 0x4f, 0x45, 0x01, 0x08, 0x16, 0xa9, 0x27, 0x25, 0xbe, 0xfe, 0x03,
+ 0xea, 0xfe, 0x7e, 0x01, 0x01, 0x08, 0x16, 0xa9, 0x27, 0x25, 0xfe, 0xe9, 0x0a, 0x01, 0x08, 0x16,
+ 0xa9, 0x27, 0x25, 0xfe, 0xe9, 0x0a, 0xfe, 0x05, 0xea, 0xfe, 0x7f, 0x01, 0x01, 0x08, 0x16, 0xa9,
+ 0x27, 0x25, 0xfe, 0x69, 0x09, 0xfe, 0x02, 0xea, 0xfe, 0x80, 0x01, 0x01, 0x08, 0x16, 0xa9, 0x27,
+ 0x25, 0xfe, 0xe8, 0x08, 0x47, 0xfe, 0x81, 0x01, 0x03, 0xb6, 0x1e, 0x83, 0x01, 0x38, 0x06, 0x24,
+ 0x31, 0xa2, 0x78, 0xf2, 0x53, 0x07, 0x36, 0xfe, 0x34, 0xf4, 0x3f, 0xa1, 0x78, 0x03, 0x9a, 0x1e,
+ 0x83, 0x01, 0x38, 0x06, 0x12, 0x31, 0xf0, 0x4f, 0x45, 0xfe, 0x90, 0x10, 0xfe, 0x40, 0x5a, 0x23,
+ 0x3f, 0xfb, 0x8c, 0x49, 0x48, 0xfe, 0xaa, 0x18, 0x62, 0x49, 0x71, 0x8c, 0x80, 0x48, 0xfe, 0xaa,
+ 0x18, 0x62, 0x80, 0xfe, 0xb4, 0x56, 0xfe, 0x40, 0x5d, 0x01, 0xc6, 0x01, 0xfe, 0xac, 0x1d, 0xfe,
+ 0x02, 0x17, 0xfe, 0xc8, 0x45, 0xfe, 0x5a, 0xf0, 0xfe, 0xc0, 0x18, 0xfe, 0x43, 0x48, 0x2d, 0x93,
+ 0x36, 0xfe, 0x34, 0xf4, 0xfe, 0x00, 0x11, 0xfe, 0x40, 0x10, 0x2d, 0xb4, 0x36, 0xfe, 0x34, 0xf4,
+ 0x04, 0xfe, 0x34, 0x10, 0x2d, 0xfe, 0x0b, 0x00, 0x36, 0x46, 0x63, 0xfe, 0x28, 0x10, 0xfe, 0xc0,
+ 0x49, 0xff, 0x02, 0x00, 0x54, 0xb2, 0xfe, 0x90, 0x01, 0x48, 0xfe, 0xfa, 0x18, 0x45, 0xfe, 0x1c,
+ 0xf4, 0x3f, 0xf3, 0xfe, 0x40, 0xf4, 0x96, 0xfe, 0x56, 0xf0, 0xfe, 0x0c, 0x19, 0xfe, 0x04, 0xf4,
+ 0x58, 0xfe, 0x40, 0xf4, 0x94, 0xf6, 0x3e, 0x2d, 0x93, 0x4e, 0xd0, 0x0d, 0x21, 0xfe, 0x7f, 0x01,
+ 0xfe, 0xc8, 0x46, 0xfe, 0x24, 0x13, 0x8c, 0x00, 0x5d, 0x26, 0x21, 0xfe, 0x7e, 0x01, 0xfe, 0xc8,
+ 0x45, 0xfe, 0x14, 0x13, 0x21, 0xfe, 0x80, 0x01, 0xfe, 0x48, 0x45, 0xfa, 0x21, 0xfe, 0x81, 0x01,
+ 0xfe, 0xc8, 0x44, 0x4e, 0x26, 0x02, 0x13, 0x07, 0x02, 0x78, 0x45, 0x50, 0x13, 0x0d, 0x02, 0x14,
+ 0x07, 0x01, 0x08, 0x17, 0xfe, 0x82, 0x19, 0x14, 0x0d, 0x01, 0x08, 0x17, 0xfe, 0x82, 0x19, 0x14,
+ 0x1d, 0x01, 0x08, 0x17, 0xfe, 0x82, 0x19, 0x5f, 0xfe, 0x89, 0x49, 0x01, 0x08, 0x02, 0x14, 0x07,
+ 0x01, 0x08, 0x17, 0xc1, 0x14, 0x1d, 0x01, 0x08, 0x17, 0xc1, 0x14, 0x07, 0x01, 0x08, 0x17, 0xc1,
+ 0xfe, 0x89, 0x49, 0x01, 0x08, 0x17, 0xc1, 0x5f, 0xfe, 0x89, 0x4a, 0x01, 0x08, 0x02, 0x50, 0x02,
+ 0x14, 0x07, 0x01, 0x08, 0x17, 0x74, 0x14, 0x7f, 0x01, 0x08, 0x17, 0x74, 0x14, 0x12, 0x01, 0x08,
+ 0x17, 0x74, 0xfe, 0x89, 0x49, 0x01, 0x08, 0x17, 0x74, 0x14, 0x00, 0x01, 0x08, 0x17, 0x74, 0xfe,
+ 0x89, 0x4a, 0x01, 0x08, 0x17, 0x74, 0xfe, 0x09, 0x49, 0x01, 0x08, 0x17, 0x74, 0x5f, 0xcc, 0x01,
+ 0x08, 0x02, 0x21, 0xe4, 0x09, 0x07, 0xfe, 0x4c, 0x13, 0xc8, 0x20, 0xe4, 0xfe, 0x49, 0xf4, 0x00,
+ 0x4d, 0x5f, 0xa1, 0x5e, 0xfe, 0x01, 0xec, 0xfe, 0x27, 0x01, 0xcc, 0xff, 0x02, 0x00, 0x10, 0x2f,
+ 0xfe, 0x3e, 0x1a, 0x01, 0x43, 0x09, 0xfe, 0xe3, 0x00, 0xfe, 0x22, 0x13, 0x16, 0xfe, 0x64, 0x1a,
+ 0x26, 0x20, 0x9e, 0x01, 0x41, 0x21, 0x9e, 0x09, 0x07, 0x5d, 0x01, 0x0c, 0x61, 0x07, 0x44, 0x02,
+ 0x0a, 0x5a, 0x01, 0x18, 0xfe, 0x00, 0x40, 0xaa, 0x09, 0x1a, 0xfe, 0x12, 0x13, 0x0a, 0x9d, 0x01,
+ 0x18, 0xaa, 0x0a, 0x67, 0x01, 0xa3, 0x02, 0x0a, 0x9d, 0x01, 0x18, 0xaa, 0xfe, 0x80, 0xe7, 0x1a,
+ 0x09, 0x1a, 0x5d, 0xfe, 0x45, 0x58, 0x01, 0xfe, 0xb2, 0x16, 0xaa, 0x02, 0x0a, 0x5a, 0x01, 0x18,
+ 0xaa, 0x0a, 0x67, 0x01, 0xa3, 0x02, 0x0a, 0x5a, 0x01, 0x18, 0x01, 0xfe, 0x7e, 0x1e, 0xfe, 0x80,
+ 0x4c, 0xfe, 0x49, 0xe4, 0x1a, 0xfe, 0x12, 0x13, 0x0a, 0x9d, 0x01, 0x18, 0xfe, 0x80, 0x4c, 0x0a,
+ 0x67, 0x01, 0x5c, 0x02, 0x1c, 0x1a, 0x87, 0x7c, 0xe5, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe,
+ 0x24, 0x1c, 0xfe, 0x1d, 0xf7, 0x28, 0xb1, 0xfe, 0x04, 0x1b, 0x01, 0xfe, 0x2a, 0x1c, 0xfa, 0xb3,
+ 0x28, 0x7c, 0xfe, 0x2c, 0x01, 0xfe, 0x2f, 0x19, 0x02, 0xc9, 0x2b, 0xfe, 0xf4, 0x1a, 0xfe, 0xfa,
+ 0x10, 0x1c, 0x1a, 0x87, 0x03, 0xfe, 0x64, 0x01, 0xfe, 0x00, 0xf4, 0x24, 0xfe, 0x18, 0x58, 0x03,
+ 0xfe, 0x66, 0x01, 0xfe, 0x19, 0x58, 0xb3, 0x24, 0x01, 0xfe, 0x0e, 0x1f, 0xfe, 0x30, 0xf4, 0x07,
+ 0xfe, 0x3c, 0x50, 0x7c, 0xfe, 0x38, 0x00, 0xfe, 0x0f, 0x79, 0xfe, 0x1c, 0xf7, 0x24, 0xb1, 0xfe,
+ 0x50, 0x1b, 0xfe, 0xd4, 0x14, 0x31, 0x02, 0xc9, 0x2b, 0xfe, 0x26, 0x1b, 0xfe, 0xba, 0x10, 0x1c,
+ 0x1a, 0x87, 0xfe, 0x83, 0x5a, 0xfe, 0x18, 0xdf, 0xfe, 0x19, 0xde, 0xfe, 0x1d, 0xf7, 0x54, 0xb1,
+ 0xfe, 0x72, 0x1b, 0xfe, 0xb2, 0x14, 0xfc, 0xb3, 0x54, 0x7c, 0x12, 0xfe, 0xaf, 0x19, 0xfe, 0x98,
+ 0xe7, 0x00, 0x02, 0xc9, 0x2b, 0xfe, 0x66, 0x1b, 0xfe, 0x8a, 0x10, 0x1c, 0x1a, 0x87, 0x8b, 0x0f,
+ 0xfe, 0x30, 0x90, 0x04, 0xfe, 0xb0, 0x93, 0x3a, 0x0b, 0xfe, 0x18, 0x58, 0xfe, 0x32, 0x90, 0x04,
+ 0xfe, 0xb2, 0x93, 0x3a, 0x0b, 0xfe, 0x19, 0x58, 0x0e, 0xa8, 0xb3, 0x4a, 0x7c, 0x12, 0xfe, 0x0f,
+ 0x79, 0xfe, 0x1c, 0xf7, 0x4a, 0xb1, 0xfe, 0xc6, 0x1b, 0xfe, 0x5e, 0x14, 0x31, 0x02, 0xc9, 0x2b,
+ 0xfe, 0x96, 0x1b, 0x5c, 0xfe, 0x02, 0xf6, 0x1a, 0x87, 0xfe, 0x18, 0xfe, 0x6a, 0xfe, 0x19, 0xfe,
+ 0x6b, 0x01, 0xfe, 0x1e, 0x1f, 0xfe, 0x1d, 0xf7, 0x65, 0xb1, 0xfe, 0xee, 0x1b, 0xfe, 0x36, 0x14,
+ 0xfe, 0x1c, 0x13, 0xb3, 0x65, 0x3e, 0xfe, 0x83, 0x58, 0xfe, 0xaf, 0x19, 0xfe, 0x80, 0xe7, 0x1a,
+ 0xfe, 0x81, 0xe7, 0x1a, 0x15, 0xfe, 0xdd, 0x00, 0x7a, 0x30, 0x02, 0x7a, 0x30, 0xfe, 0x12, 0x45,
+ 0x2b, 0xfe, 0xdc, 0x1b, 0x1f, 0x07, 0x47, 0xb5, 0xc3, 0x05, 0x35, 0xfe, 0x39, 0xf0, 0x75, 0x26,
+ 0x02, 0xfe, 0x7e, 0x18, 0x23, 0x1d, 0x36, 0x13, 0x11, 0x02, 0x87, 0x03, 0xe3, 0x23, 0x07, 0xfe,
+ 0xef, 0x12, 0xfe, 0xe1, 0x10, 0x90, 0x34, 0x60, 0xfe, 0x02, 0x80, 0x09, 0x56, 0xfe, 0x3c, 0x13,
+ 0xfe, 0x82, 0x14, 0xfe, 0x42, 0x13, 0x51, 0xfe, 0x06, 0x83, 0x0a, 0x5a, 0x01, 0x18, 0xcb, 0xfe,
+ 0x3e, 0x12, 0xfe, 0x41, 0x48, 0xfe, 0x45, 0x48, 0x01, 0xfe, 0xb2, 0x16, 0xfe, 0x00, 0xcc, 0xcb,
+ 0xfe, 0xf3, 0x13, 0x3f, 0x89, 0x09, 0x1a, 0xa5, 0x0a, 0x9d, 0x01, 0x18, 0xfe, 0x80, 0x4c, 0x01,
+ 0x85, 0xfe, 0x16, 0x10, 0x09, 0x9b, 0x4e, 0xfe, 0x40, 0x14, 0xfe, 0x24, 0x12, 0xfe, 0x14, 0x56,
+ 0xfe, 0xd6, 0xf0, 0xfe, 0x52, 0x1c, 0x1c, 0x0d, 0x02, 0xfe, 0x9c, 0xe7, 0x0d, 0x19, 0xfe, 0x15,
+ 0x00, 0x40, 0x8d, 0x30, 0x01, 0xf4, 0x1c, 0x07, 0x02, 0x51, 0xfe, 0x06, 0x83, 0xfe, 0x18, 0x80,
+ 0x61, 0x28, 0x44, 0x15, 0x56, 0x01, 0x85, 0x1c, 0x07, 0x02, 0xfe, 0x38, 0x90, 0xfe, 0xba, 0x90,
+ 0x91, 0xde, 0x7e, 0xdf, 0xfe, 0x48, 0x55, 0x31, 0xfe, 0xc9, 0x55, 0x02, 0x21, 0xb9, 0x88, 0x20,
+ 0xb9, 0x02, 0x0a, 0xba, 0x01, 0x18, 0xfe, 0x41, 0x48, 0x0a, 0x57, 0x01, 0x18, 0xfe, 0x49, 0x44,
+ 0x1b, 0xfe, 0x1e, 0x1d, 0x88, 0x89, 0x02, 0x0a, 0x5a, 0x01, 0x18, 0x09, 0x1a, 0xa4, 0x0a, 0x67,
+ 0x01, 0xa3, 0x0a, 0x57, 0x01, 0x18, 0x88, 0x89, 0x02, 0xfe, 0x4e, 0xe4, 0x1d, 0x7b, 0xfe, 0x52,
+ 0x1d, 0x03, 0xfe, 0x90, 0x00, 0xfe, 0x3a, 0x45, 0xfe, 0x2c, 0x10, 0xfe, 0x4e, 0xe4, 0xdd, 0x7b,
+ 0xfe, 0x64, 0x1d, 0x03, 0xfe, 0x92, 0x00, 0xd1, 0x12, 0xfe, 0x1a, 0x10, 0xfe, 0x4e, 0xe4, 0xfe,
+ 0x0b, 0x00, 0x7b, 0xfe, 0x76, 0x1d, 0x03, 0xfe, 0x94, 0x00, 0xd1, 0x24, 0xfe, 0x08, 0x10, 0x03,
+ 0xfe, 0x96, 0x00, 0xd1, 0x63, 0xfe, 0x4e, 0x45, 0x83, 0xca, 0xff, 0x04, 0x68, 0x54, 0xfe, 0xf1,
+ 0x10, 0x23, 0x49, 0xfe, 0x08, 0x1c, 0xfe, 0x67, 0x19, 0xfe, 0x0a, 0x1c, 0xfe, 0x1a, 0xf4, 0xfe,
+ 0x00, 0x04, 0x83, 0xb2, 0x1d, 0x48, 0xfe, 0xaa, 0x1d, 0x13, 0x1d, 0x02, 0x09, 0x92, 0xfe, 0x5a,
+ 0xf0, 0xfe, 0xba, 0x1d, 0x2e, 0x93, 0xfe, 0x34, 0x10, 0x09, 0x12, 0xfe, 0x5a, 0xf0, 0xfe, 0xc8,
+ 0x1d, 0x2e, 0xb4, 0xfe, 0x26, 0x10, 0x09, 0x1d, 0x36, 0x2e, 0x63, 0xfe, 0x1a, 0x10, 0x09, 0x0d,
+ 0x36, 0x2e, 0x94, 0xf2, 0x09, 0x07, 0x36, 0x2e, 0x95, 0xa1, 0xc8, 0x02, 0x1f, 0x93, 0x01, 0x42,
+ 0xfe, 0x04, 0xfe, 0x99, 0x03, 0x9c, 0x8b, 0x02, 0x2a, 0xfe, 0x1c, 0x1e, 0xfe, 0x14, 0xf0, 0x08,
+ 0x2f, 0xfe, 0x0c, 0x1e, 0x2a, 0xfe, 0x1c, 0x1e, 0x8f, 0xfe, 0x1c, 0x1e, 0xfe, 0x82, 0xf0, 0xfe,
+ 0x10, 0x1e, 0x02, 0x0f, 0x3f, 0x04, 0xfe, 0x80, 0x83, 0x33, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x18,
+ 0x80, 0x04, 0xfe, 0x98, 0x83, 0x33, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x02, 0x80, 0x04, 0xfe, 0x82,
+ 0x83, 0x33, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x06, 0x80, 0x04, 0xfe, 0x86, 0x83, 0x33, 0x0b, 0x0e,
+ 0x02, 0x0f, 0xfe, 0x1b, 0x80, 0x04, 0xfe, 0x9b, 0x83, 0x33, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x04,
+ 0x80, 0x04, 0xfe, 0x84, 0x83, 0x33, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x80, 0x80, 0x04, 0xfe, 0x80,
+ 0x83, 0xfe, 0xc9, 0x47, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x19, 0x81, 0x04, 0xfe, 0x99, 0x83, 0xfe,
+ 0xca, 0x47, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x06, 0x83, 0x04, 0xfe, 0x86, 0x83, 0xfe, 0xce, 0x47,
+ 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x2c, 0x90, 0x04, 0xfe, 0xac, 0x93, 0x3a, 0x0b, 0x0e, 0x02, 0x0f,
+ 0xfe, 0xae, 0x90, 0x04, 0xfe, 0xae, 0x93, 0x79, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x08, 0x90, 0x04,
+ 0xfe, 0x88, 0x93, 0x3a, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x8a, 0x90, 0x04, 0xfe, 0x8a, 0x93, 0x79,
+ 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x0c, 0x90, 0x04, 0xfe, 0x8c, 0x93, 0x3a, 0x0b, 0x0e, 0x02, 0x0f,
+ 0xfe, 0x8e, 0x90, 0x04, 0xfe, 0x8e, 0x93, 0x79, 0x0b, 0x0e, 0x02, 0x0f, 0xfe, 0x3c, 0x90, 0x04,
+ 0xfe, 0xbc, 0x93, 0x3a, 0x0b, 0x0e, 0x02, 0x8b, 0x0f, 0xfe, 0x03, 0x80, 0x04, 0xfe, 0x83, 0x83,
+ 0x33, 0x0b, 0x77, 0x0e, 0xa8, 0x02, 0xff, 0x66, 0x00, 0x00,
+};
+
+STATIC unsigned short _adv_asc38C1600_size =
+ sizeof(_adv_asc38C1600_buf); /* 0x1673 */
+STATIC ADV_DCNT _adv_asc38C1600_chksum =
+ 0x0604EF77UL; /* Expanded little-endian checksum. */
+
+/* a_init.c */
+/*
+ * EEPROM Configuration.
+ *
+ * All drivers should use this structure to set the default EEPROM
+ * configuration. The BIOS now uses this structure when it is built.
+ * Additional structure information can be found in a_condor.h where
+ * the structure is defined.
+ *
+ * The *_Field_IsChar structs are needed to correct for endianness.
+ * These values are read from the board 16 bits at a time directly
+ * into the structs. Because some fields are char, the values will be
+ * in the wrong order. The *_Field_IsChar tells when to flip the
+ * bytes. Data read and written to PCI memory is automatically swapped
+ * on big-endian platforms so char fields read as words are actually being
+ * unswapped on big-endian platforms.
+ */
+STATIC ADVEEP_3550_CONFIG
+Default_3550_EEPROM_Config __initdata = {
+ ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */
+ 0x0000, /* cfg_msw */
+ 0xFFFF, /* disc_enable */
+ 0xFFFF, /* wdtr_able */
+ 0xFFFF, /* sdtr_able */
+ 0xFFFF, /* start_motor */
+ 0xFFFF, /* tagqng_able */
+ 0xFFFF, /* bios_scan */
+ 0, /* scam_tolerant */
+ 7, /* adapter_scsi_id */
+ 0, /* bios_boot_delay */
+ 3, /* scsi_reset_delay */
+ 0, /* bios_id_lun */
+ 0, /* termination */
+ 0, /* reserved1 */
+ 0xFFE7, /* bios_ctrl */
+ 0xFFFF, /* ultra_able */
+ 0, /* reserved2 */
+ ASC_DEF_MAX_HOST_QNG, /* max_host_qng */
+ ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
+ 0, /* dvc_cntl */
+ 0, /* bug_fix */
+ 0, /* serial_number_word1 */
+ 0, /* serial_number_word2 */
+ 0, /* serial_number_word3 */
+ 0, /* check_sum */
+ { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }, /* oem_name[16] */
+ 0, /* dvc_err_code */
+ 0, /* adv_err_code */
+ 0, /* adv_err_addr */
+ 0, /* saved_dvc_err_code */
+ 0, /* saved_adv_err_code */
+ 0, /* saved_adv_err_addr */
+ 0 /* num_of_err */
+};
+
+STATIC ADVEEP_3550_CONFIG
+ADVEEP_3550_Config_Field_IsChar __initdata = {
+ 0, /* cfg_lsw */
+ 0, /* cfg_msw */
+ 0, /* -disc_enable */
+ 0, /* wdtr_able */
+ 0, /* sdtr_able */
+ 0, /* start_motor */
+ 0, /* tagqng_able */
+ 0, /* bios_scan */
+ 0, /* scam_tolerant */
+ 1, /* adapter_scsi_id */
+ 1, /* bios_boot_delay */
+ 1, /* scsi_reset_delay */
+ 1, /* bios_id_lun */
+ 1, /* termination */
+ 1, /* reserved1 */
+ 0, /* bios_ctrl */
+ 0, /* ultra_able */
+ 0, /* reserved2 */
+ 1, /* max_host_qng */
+ 1, /* max_dvc_qng */
+ 0, /* dvc_cntl */
+ 0, /* bug_fix */
+ 0, /* serial_number_word1 */
+ 0, /* serial_number_word2 */
+ 0, /* serial_number_word3 */
+ 0, /* check_sum */
+ { 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 }, /* oem_name[16] */
+ 0, /* dvc_err_code */
+ 0, /* adv_err_code */
+ 0, /* adv_err_addr */
+ 0, /* saved_dvc_err_code */
+ 0, /* saved_adv_err_code */
+ 0, /* saved_adv_err_addr */
+ 0 /* num_of_err */
+};
+
+STATIC ADVEEP_38C0800_CONFIG
+Default_38C0800_EEPROM_Config __initdata = {
+ ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
+ 0x0000, /* 01 cfg_msw */
+ 0xFFFF, /* 02 disc_enable */
+ 0xFFFF, /* 03 wdtr_able */
+ 0x4444, /* 04 sdtr_speed1 */
+ 0xFFFF, /* 05 start_motor */
+ 0xFFFF, /* 06 tagqng_able */
+ 0xFFFF, /* 07 bios_scan */
+ 0, /* 08 scam_tolerant */
+ 7, /* 09 adapter_scsi_id */
+ 0, /* bios_boot_delay */
+ 3, /* 10 scsi_reset_delay */
+ 0, /* bios_id_lun */
+ 0, /* 11 termination_se */
+ 0, /* termination_lvd */
+ 0xFFE7, /* 12 bios_ctrl */
+ 0x4444, /* 13 sdtr_speed2 */
+ 0x4444, /* 14 sdtr_speed3 */
+ ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */
+ ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
+ 0, /* 16 dvc_cntl */
+ 0x4444, /* 17 sdtr_speed4 */
+ 0, /* 18 serial_number_word1 */
+ 0, /* 19 serial_number_word2 */
+ 0, /* 20 serial_number_word3 */
+ 0, /* 21 check_sum */
+ { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }, /* 22-29 oem_name[16] */
+ 0, /* 30 dvc_err_code */
+ 0, /* 31 adv_err_code */
+ 0, /* 32 adv_err_addr */
+ 0, /* 33 saved_dvc_err_code */
+ 0, /* 34 saved_adv_err_code */
+ 0, /* 35 saved_adv_err_addr */
+ 0, /* 36 reserved */
+ 0, /* 37 reserved */
+ 0, /* 38 reserved */
+ 0, /* 39 reserved */
+ 0, /* 40 reserved */
+ 0, /* 41 reserved */
+ 0, /* 42 reserved */
+ 0, /* 43 reserved */
+ 0, /* 44 reserved */
+ 0, /* 45 reserved */
+ 0, /* 46 reserved */
+ 0, /* 47 reserved */
+ 0, /* 48 reserved */
+ 0, /* 49 reserved */
+ 0, /* 50 reserved */
+ 0, /* 51 reserved */
+ 0, /* 52 reserved */
+ 0, /* 53 reserved */
+ 0, /* 54 reserved */
+ 0, /* 55 reserved */
+ 0, /* 56 cisptr_lsw */
+ 0, /* 57 cisprt_msw */
+ ADV_PCI_VENDOR_ID, /* 58 subsysvid */
+ ADV_PCI_DEVID_38C0800_REV1, /* 59 subsysid */
+ 0, /* 60 reserved */
+ 0, /* 61 reserved */
+ 0, /* 62 reserved */
+ 0 /* 63 reserved */
+};
+
+STATIC ADVEEP_38C0800_CONFIG
+ADVEEP_38C0800_Config_Field_IsChar __initdata = {
+ 0, /* 00 cfg_lsw */
+ 0, /* 01 cfg_msw */
+ 0, /* 02 disc_enable */
+ 0, /* 03 wdtr_able */
+ 0, /* 04 sdtr_speed1 */
+ 0, /* 05 start_motor */
+ 0, /* 06 tagqng_able */
+ 0, /* 07 bios_scan */
+ 0, /* 08 scam_tolerant */
+ 1, /* 09 adapter_scsi_id */
+ 1, /* bios_boot_delay */
+ 1, /* 10 scsi_reset_delay */
+ 1, /* bios_id_lun */
+ 1, /* 11 termination_se */
+ 1, /* termination_lvd */
+ 0, /* 12 bios_ctrl */
+ 0, /* 13 sdtr_speed2 */
+ 0, /* 14 sdtr_speed3 */
+ 1, /* 15 max_host_qng */
+ 1, /* max_dvc_qng */
+ 0, /* 16 dvc_cntl */
+ 0, /* 17 sdtr_speed4 */
+ 0, /* 18 serial_number_word1 */
+ 0, /* 19 serial_number_word2 */
+ 0, /* 20 serial_number_word3 */
+ 0, /* 21 check_sum */
+ { 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 }, /* 22-29 oem_name[16] */
+ 0, /* 30 dvc_err_code */
+ 0, /* 31 adv_err_code */
+ 0, /* 32 adv_err_addr */
+ 0, /* 33 saved_dvc_err_code */
+ 0, /* 34 saved_adv_err_code */
+ 0, /* 35 saved_adv_err_addr */
+ 0, /* 36 reserved */
+ 0, /* 37 reserved */
+ 0, /* 38 reserved */
+ 0, /* 39 reserved */
+ 0, /* 40 reserved */
+ 0, /* 41 reserved */
+ 0, /* 42 reserved */
+ 0, /* 43 reserved */
+ 0, /* 44 reserved */
+ 0, /* 45 reserved */
+ 0, /* 46 reserved */
+ 0, /* 47 reserved */
+ 0, /* 48 reserved */
+ 0, /* 49 reserved */
+ 0, /* 50 reserved */
+ 0, /* 51 reserved */
+ 0, /* 52 reserved */
+ 0, /* 53 reserved */
+ 0, /* 54 reserved */
+ 0, /* 55 reserved */
+ 0, /* 56 cisptr_lsw */
+ 0, /* 57 cisprt_msw */
+ 0, /* 58 subsysvid */
+ 0, /* 59 subsysid */
+ 0, /* 60 reserved */
+ 0, /* 61 reserved */
+ 0, /* 62 reserved */
+ 0 /* 63 reserved */
+};
+
+STATIC ADVEEP_38C1600_CONFIG
+Default_38C1600_EEPROM_Config __initdata = {
+ ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
+ 0x0000, /* 01 cfg_msw */
+ 0xFFFF, /* 02 disc_enable */
+ 0xFFFF, /* 03 wdtr_able */
+ 0x5555, /* 04 sdtr_speed1 */
+ 0xFFFF, /* 05 start_motor */
+ 0xFFFF, /* 06 tagqng_able */
+ 0xFFFF, /* 07 bios_scan */
+ 0, /* 08 scam_tolerant */
+ 7, /* 09 adapter_scsi_id */
+ 0, /* bios_boot_delay */
+ 3, /* 10 scsi_reset_delay */
+ 0, /* bios_id_lun */
+ 0, /* 11 termination_se */
+ 0, /* termination_lvd */
+ 0xFFE7, /* 12 bios_ctrl */
+ 0x5555, /* 13 sdtr_speed2 */
+ 0x5555, /* 14 sdtr_speed3 */
+ ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */
+ ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */
+ 0, /* 16 dvc_cntl */
+ 0x5555, /* 17 sdtr_speed4 */
+ 0, /* 18 serial_number_word1 */
+ 0, /* 19 serial_number_word2 */
+ 0, /* 20 serial_number_word3 */
+ 0, /* 21 check_sum */
+ { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }, /* 22-29 oem_name[16] */
+ 0, /* 30 dvc_err_code */
+ 0, /* 31 adv_err_code */
+ 0, /* 32 adv_err_addr */
+ 0, /* 33 saved_dvc_err_code */
+ 0, /* 34 saved_adv_err_code */
+ 0, /* 35 saved_adv_err_addr */
+ 0, /* 36 reserved */
+ 0, /* 37 reserved */
+ 0, /* 38 reserved */
+ 0, /* 39 reserved */
+ 0, /* 40 reserved */
+ 0, /* 41 reserved */
+ 0, /* 42 reserved */
+ 0, /* 43 reserved */
+ 0, /* 44 reserved */
+ 0, /* 45 reserved */
+ 0, /* 46 reserved */
+ 0, /* 47 reserved */
+ 0, /* 48 reserved */
+ 0, /* 49 reserved */
+ 0, /* 50 reserved */
+ 0, /* 51 reserved */
+ 0, /* 52 reserved */
+ 0, /* 53 reserved */
+ 0, /* 54 reserved */
+ 0, /* 55 reserved */
+ 0, /* 56 cisptr_lsw */
+ 0, /* 57 cisprt_msw */
+ ADV_PCI_VENDOR_ID, /* 58 subsysvid */
+ ADV_PCI_DEVID_38C1600_REV1, /* 59 subsysid */
+ 0, /* 60 reserved */
+ 0, /* 61 reserved */
+ 0, /* 62 reserved */
+ 0 /* 63 reserved */
+};
+
+STATIC ADVEEP_38C1600_CONFIG
+ADVEEP_38C1600_Config_Field_IsChar __initdata = {
+ 0, /* 00 cfg_lsw */
+ 0, /* 01 cfg_msw */
+ 0, /* 02 disc_enable */
+ 0, /* 03 wdtr_able */
+ 0, /* 04 sdtr_speed1 */
+ 0, /* 05 start_motor */
+ 0, /* 06 tagqng_able */
+ 0, /* 07 bios_scan */
+ 0, /* 08 scam_tolerant */
+ 1, /* 09 adapter_scsi_id */
+ 1, /* bios_boot_delay */
+ 1, /* 10 scsi_reset_delay */
+ 1, /* bios_id_lun */
+ 1, /* 11 termination_se */
+ 1, /* termination_lvd */
+ 0, /* 12 bios_ctrl */
+ 0, /* 13 sdtr_speed2 */
+ 0, /* 14 sdtr_speed3 */
+ 1, /* 15 max_host_qng */
+ 1, /* max_dvc_qng */
+ 0, /* 16 dvc_cntl */
+ 0, /* 17 sdtr_speed4 */
+ 0, /* 18 serial_number_word1 */
+ 0, /* 19 serial_number_word2 */
+ 0, /* 20 serial_number_word3 */
+ 0, /* 21 check_sum */
+ { 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 }, /* 22-29 oem_name[16] */
+ 0, /* 30 dvc_err_code */
+ 0, /* 31 adv_err_code */
+ 0, /* 32 adv_err_addr */
+ 0, /* 33 saved_dvc_err_code */
+ 0, /* 34 saved_adv_err_code */
+ 0, /* 35 saved_adv_err_addr */
+ 0, /* 36 reserved */
+ 0, /* 37 reserved */
+ 0, /* 38 reserved */
+ 0, /* 39 reserved */
+ 0, /* 40 reserved */
+ 0, /* 41 reserved */
+ 0, /* 42 reserved */
+ 0, /* 43 reserved */
+ 0, /* 44 reserved */
+ 0, /* 45 reserved */
+ 0, /* 46 reserved */
+ 0, /* 47 reserved */
+ 0, /* 48 reserved */
+ 0, /* 49 reserved */
+ 0, /* 50 reserved */
+ 0, /* 51 reserved */
+ 0, /* 52 reserved */
+ 0, /* 53 reserved */
+ 0, /* 54 reserved */
+ 0, /* 55 reserved */
+ 0, /* 56 cisptr_lsw */
+ 0, /* 57 cisprt_msw */
+ 0, /* 58 subsysvid */
+ 0, /* 59 subsysid */
+ 0, /* 60 reserved */
+ 0, /* 61 reserved */
+ 0, /* 62 reserved */
+ 0 /* 63 reserved */
+};
+
+/*
+ * Initialize the ADV_DVC_VAR structure.
+ *
+ * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ */
+STATIC int __init
+AdvInitGetConfig(ADV_DVC_VAR *asc_dvc)
+{
+ ushort warn_code;
+ AdvPortAddr iop_base;
+ uchar pci_cmd_reg;
+ int status;
+
+ warn_code = 0;
+ asc_dvc->err_code = 0;
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * PCI Command Register
+ *
+ * Note: AscPCICmdRegBits_BusMastering definition (0x0007) includes
+ * I/O Space Control, Memory Space Control and Bus Master Control bits.
+ */
+
+ if (((pci_cmd_reg = DvcAdvReadPCIConfigByte(asc_dvc,
+ AscPCIConfigCommandRegister))
+ & AscPCICmdRegBits_BusMastering)
+ != AscPCICmdRegBits_BusMastering)
+ {
+ pci_cmd_reg |= AscPCICmdRegBits_BusMastering;
+
+ DvcAdvWritePCIConfigByte(asc_dvc,
+ AscPCIConfigCommandRegister, pci_cmd_reg);
+
+ if (((DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigCommandRegister))
+ & AscPCICmdRegBits_BusMastering)
+ != AscPCICmdRegBits_BusMastering)
+ {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ }
+
+ /*
+ * PCI Latency Timer
+ *
+ * If the "latency timer" register is 0x20 or above, then we don't need
+ * to change it. Otherwise, set it to 0x20 (i.e. set it to 0x20 if it
+ * comes up less than 0x20).
+ */
+ if (DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer) < 0x20) {
+ DvcAdvWritePCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer, 0x20);
+ if (DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer) < 0x20)
+ {
+ warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
+ }
+ }
+
+ /*
+ * Save the state of the PCI Configuration Command Register
+ * "Parity Error Response Control" Bit. If the bit is clear (0),
+ * in AdvInitAsc3550/38C0800Driver() tell the microcode to ignore
+ * DMA parity errors.
+ */
+ asc_dvc->cfg->control_flag = 0;
+ if (((DvcAdvReadPCIConfigByte(asc_dvc, AscPCIConfigCommandRegister)
+ & AscPCICmdRegBits_ParErrRespCtrl)) == 0)
+ {
+ asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR;
+ }
+
+ asc_dvc->cfg->lib_version = (ADV_LIB_VERSION_MAJOR << 8) |
+ ADV_LIB_VERSION_MINOR;
+ asc_dvc->cfg->chip_version =
+ AdvGetChipVersion(iop_base, asc_dvc->bus_type);
+
+ ASC_DBG2(1, "AdvInitGetConfig: iopb_chip_id_1: 0x%x 0x%x\n",
+ (ushort) AdvReadByteRegister(iop_base, IOPB_CHIP_ID_1),
+ (ushort) ADV_CHIP_ID_BYTE);
+
+ ASC_DBG2(1, "AdvInitGetConfig: iopw_chip_id_0: 0x%x 0x%x\n",
+ (ushort) AdvReadWordRegister(iop_base, IOPW_CHIP_ID_0),
+ (ushort) ADV_CHIP_ID_WORD);
+
+ /*
+ * Reset the chip to start and allow register writes.
+ */
+ if (AdvFindSignature(iop_base) == 0)
+ {
+ asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
+ return ADV_ERROR;
+ }
+ else {
+ /*
+ * The caller must set 'chip_type' to a valid setting.
+ */
+ if (asc_dvc->chip_type != ADV_CHIP_ASC3550 &&
+ asc_dvc->chip_type != ADV_CHIP_ASC38C0800 &&
+ asc_dvc->chip_type != ADV_CHIP_ASC38C1600)
+ {
+ asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Reset Chip.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_CTRL_REG,
+ ADV_CTRL_REG_CMD_RESET);
+ DvcSleepMilliSecond(100);
+ AdvWriteWordRegister(iop_base, IOPW_CTRL_REG,
+ ADV_CTRL_REG_CMD_WR_IO_REG);
+
+ if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ if ((status = AdvInitFrom38C1600EEP(asc_dvc)) == ADV_ERROR)
+ {
+ return ADV_ERROR;
+ }
+ } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ if ((status = AdvInitFrom38C0800EEP(asc_dvc)) == ADV_ERROR)
+ {
+ return ADV_ERROR;
+ }
+ } else
+ {
+ if ((status = AdvInitFrom3550EEP(asc_dvc)) == ADV_ERROR)
+ {
+ return ADV_ERROR;
+ }
+ }
+ warn_code |= status;
+ }
+
+ return warn_code;
+}
+
+/*
+ * Initialize the ASC-3550.
+ *
+ * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Needed after initialization for error recovery.
+ */
+STATIC int
+AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADV_DCNT sum;
+ int begin_addr;
+ int end_addr;
+ ushort code_sum;
+ int word;
+ int j;
+ int adv_asc3550_expanded_size;
+ ADV_CARR_T *carrp;
+ ADV_DCNT contig_len;
+ ADV_SDCNT buf_size;
+ ADV_PADDR carr_paddr;
+ int i;
+ ushort scsi_cfg1;
+ uchar tid;
+ ushort bios_mem[ASC_MC_BIOSLEN/2]; /* BIOS RISC Memory 0x40-0x8F. */
+ ushort wdtr_able = 0, sdtr_able, tagqng_able;
+ uchar max_cmd[ADV_MAX_TID + 1];
+
+ /* If there is already an error, don't continue. */
+ if (asc_dvc->err_code != 0)
+ {
+ return ADV_ERROR;
+ }
+
+ /*
+ * The caller must set 'chip_type' to ADV_CHIP_ASC3550.
+ */
+ if (asc_dvc->chip_type != ADV_CHIP_ASC3550)
+ {
+ asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE;
+ return ADV_ERROR;
+ }
+
+ warn_code = 0;
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * Save the RISC memory BIOS region before writing the microcode.
+ * The BIOS may already be loaded and using its RISC LRAM region
+ * so its region must be saved and restored.
+ *
+ * Note: This code makes the assumption, which is currently true,
+ * that a chip reset does not clear RISC LRAM.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Save current per TID negotiated values.
+ */
+ if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM)/2] == 0x55AA)
+ {
+ ushort bios_version, major, minor;
+
+ bios_version = bios_mem[(ASC_MC_BIOS_VERSION - ASC_MC_BIOSMEM)/2];
+ major = (bios_version >> 12) & 0xF;
+ minor = (bios_version >> 8) & 0xF;
+ if (major < 3 || (major == 3 && minor == 1))
+ {
+ /* BIOS 3.1 and earlier location of 'wdtr_able' variable. */
+ AdvReadWordLram(iop_base, 0x120, wdtr_able);
+ } else
+ {
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ }
+ }
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+
+ /*
+ * Load the Microcode
+ *
+ * Write the microcode image to RISC memory starting at address 0.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+ /* Assume the following compressed format of the microcode buffer:
+ *
+ * 254 word (508 byte) table indexed by byte code followed
+ * by the following byte codes:
+ *
+ * 1-Byte Code:
+ * 00: Emit word 0 in table.
+ * 01: Emit word 1 in table.
+ * .
+ * FD: Emit word 253 in table.
+ *
+ * Multi-Byte Code:
+ * FE WW WW: (3 byte code) Word to emit is the next word WW WW.
+ * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW.
+ */
+ word = 0;
+ for (i = 253 * 2; i < _adv_asc3550_size; i++)
+ {
+ if (_adv_asc3550_buf[i] == 0xff)
+ {
+ for (j = 0; j < _adv_asc3550_buf[i + 1]; j++)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc3550_buf[i + 3] << 8) |
+ _adv_asc3550_buf[i + 2]));
+ word++;
+ }
+ i += 3;
+ } else if (_adv_asc3550_buf[i] == 0xfe)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc3550_buf[i + 2] << 8) |
+ _adv_asc3550_buf[i + 1]));
+ i += 2;
+ word++;
+ } else
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc3550_buf[(_adv_asc3550_buf[i] * 2) + 1] << 8) |
+ _adv_asc3550_buf[_adv_asc3550_buf[i] * 2]));
+ word++;
+ }
+ }
+
+ /*
+ * Set 'word' for later use to clear the rest of memory and save
+ * the expanded mcode size.
+ */
+ word *= 2;
+ adv_asc3550_expanded_size = word;
+
+ /*
+ * Clear the rest of ASC-3550 Internal RAM (8KB).
+ */
+ for (; word < ADV_3550_MEMSIZE; word += 2)
+ {
+ AdvWriteWordAutoIncLram(iop_base, 0);
+ }
+
+ /*
+ * Verify the microcode checksum.
+ */
+ sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+
+ for (word = 0; word < adv_asc3550_expanded_size; word += 2)
+ {
+ sum += AdvReadWordAutoIncLram(iop_base);
+ }
+
+ if (sum != _adv_asc3550_chksum)
+ {
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Restore the RISC memory BIOS region.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Calculate and write the microcode code checksum to the microcode
+ * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
+ */
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
+ AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
+ code_sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
+ for (word = begin_addr; word < end_addr; word += 2)
+ {
+ code_sum += AdvReadWordAutoIncLram(iop_base);
+ }
+ AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
+
+ /*
+ * Read and save microcode version and date.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, asc_dvc->cfg->mcode_date);
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, asc_dvc->cfg->mcode_version);
+
+ /*
+ * Set the chip type to indicate the ASC3550.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC3550);
+
+ /*
+ * If the PCI Configuration Command Register "Parity Error Response
+ * Control" Bit was clear (0), then set the microcode variable
+ * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
+ * to ignore DMA parity errors.
+ */
+ if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ word |= CONTROL_FLAG_IGNORE_PERR;
+ AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ }
+
+ /*
+ * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a FIFO
+ * threshold of 128 bytes. This register is only accessible to the host.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
+ START_CTL_EMFU | READ_CMD_MRM);
+
+ /*
+ * Microcode operating variables for WDTR, SDTR, and command tag
+ * queuing will be set in AdvInquiryHandling() based on what a
+ * device reports it is capable of in Inquiry byte 7.
+ *
+ * If SCSI Bus Resets have been disabled, then directly set
+ * SDTR and WDTR from the EEPROM configuration. This will allow
+ * the BIOS and warm boot to work without a SCSI bus hang on
+ * the Inquiry caused by host and target mismatched DTR values.
+ * Without the SCSI Bus Reset, before an Inquiry a device can't
+ * be assumed to be in Asynchronous, Narrow mode.
+ */
+ if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, asc_dvc->wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, asc_dvc->sdtr_able);
+ }
+
+ /*
+ * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2,
+ * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID
+ * bitmask. These values determine the maximum SDTR speed negotiated
+ * with a device.
+ *
+ * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
+ * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
+ * without determining here whether the device supports SDTR.
+ *
+ * 4-bit speed SDTR speed name
+ * =========== ===============
+ * 0000b (0x0) SDTR disabled
+ * 0001b (0x1) 5 Mhz
+ * 0010b (0x2) 10 Mhz
+ * 0011b (0x3) 20 Mhz (Ultra)
+ * 0100b (0x4) 40 Mhz (LVD/Ultra2)
+ * 0101b (0x5) 80 Mhz (LVD2/Ultra3)
+ * 0110b (0x6) Undefined
+ * .
+ * 1111b (0xF) Undefined
+ */
+ word = 0;
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ if (ADV_TID_TO_TIDMASK(tid) & asc_dvc->ultra_able)
+ {
+ /* Set Ultra speed for TID 'tid'. */
+ word |= (0x3 << (4 * (tid % 4)));
+ } else
+ {
+ /* Set Fast speed for TID 'tid'. */
+ word |= (0x2 << (4 * (tid % 4)));
+ }
+ if (tid == 3) /* Check if done with sdtr_speed1. */
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, word);
+ word = 0;
+ } else if (tid == 7) /* Check if done with sdtr_speed2. */
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, word);
+ word = 0;
+ } else if (tid == 11) /* Check if done with sdtr_speed3. */
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, word);
+ word = 0;
+ } else if (tid == 15) /* Check if done with sdtr_speed4. */
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, word);
+ /* End of loop. */
+ }
+ }
+
+ /*
+ * Set microcode operating variable for the disconnect per TID bitmask.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, asc_dvc->cfg->disc_enable);
+
+ /*
+ * Set SCSI_CFG0 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG0 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
+ PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
+ asc_dvc->chip_scsi_id);
+
+ /*
+ * Determine SCSI_CFG1 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ */
+
+ /* Read current SCSI_CFG1 Register value. */
+ scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
+
+ /*
+ * If all three connectors are in use, return an error.
+ */
+ if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 ||
+ (scsi_cfg1 & CABLE_ILLEGAL_B) == 0)
+ {
+ asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION;
+ return ADV_ERROR;
+ }
+
+ /*
+ * If the internal narrow cable is reversed all of the SCSI_CTRL
+ * register signals will be set. Check for and return an error if
+ * this condition is found.
+ */
+ if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07)
+ {
+ asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * If this is a differential board and a single-ended device
+ * is attached to one of the connectors, return an error.
+ */
+ if ((scsi_cfg1 & DIFF_MODE) && (scsi_cfg1 & DIFF_SENSE) == 0)
+ {
+ asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * If automatic termination control is enabled, then set the
+ * termination value based on a table listed in a_condor.h.
+ *
+ * If manual termination was specified with an EEPROM setting
+ * then 'termination' was set-up in AdvInitFrom3550EEPROM() and
+ * is ready to be 'ored' into SCSI_CFG1.
+ */
+ if (asc_dvc->cfg->termination == 0)
+ {
+ /*
+ * The software always controls termination by setting TERM_CTL_SEL.
+ * If TERM_CTL_SEL were set to 0, the hardware would set termination.
+ */
+ asc_dvc->cfg->termination |= TERM_CTL_SEL;
+
+ switch(scsi_cfg1 & CABLE_DETECT)
+ {
+ /* TERM_CTL_H: on, TERM_CTL_L: on */
+ case 0x3: case 0x7: case 0xB: case 0xD: case 0xE: case 0xF:
+ asc_dvc->cfg->termination |= (TERM_CTL_H | TERM_CTL_L);
+ break;
+
+ /* TERM_CTL_H: on, TERM_CTL_L: off */
+ case 0x1: case 0x5: case 0x9: case 0xA: case 0xC:
+ asc_dvc->cfg->termination |= TERM_CTL_H;
+ break;
+
+ /* TERM_CTL_H: off, TERM_CTL_L: off */
+ case 0x2: case 0x6:
+ break;
+ }
+ }
+
+ /*
+ * Clear any set TERM_CTL_H and TERM_CTL_L bits.
+ */
+ scsi_cfg1 &= ~TERM_CTL;
+
+ /*
+ * Invert the TERM_CTL_H and TERM_CTL_L bits and then
+ * set 'scsi_cfg1'. The TERM_POL bit does not need to be
+ * referenced, because the hardware internally inverts
+ * the Termination High and Low bits if TERM_POL is set.
+ */
+ scsi_cfg1 |= (TERM_CTL_SEL | (~asc_dvc->cfg->termination & TERM_CTL));
+
+ /*
+ * Set SCSI_CFG1 Microcode Default Value
+ *
+ * Set filter value and possibly modified termination control
+ * bits in the Microcode SCSI_CFG1 Register Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1,
+ FLTR_DISABLE | scsi_cfg1);
+
+ /*
+ * Set MEM_CFG Microcode Default Value
+ *
+ * The microcode will set the MEM_CFG register using this value
+ * after it is started below.
+ *
+ * MEM_CFG may be accessed as a word or byte, but only bits 0-7
+ * are defined.
+ *
+ * ASC-3550 has 8KB internal memory.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
+ BIOS_EN | RAM_SZ_8KB);
+
+ /*
+ * Set SEL_MASK Microcode Default Value
+ *
+ * The microcode will set the SEL_MASK register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
+ ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
+
+ /*
+ * Build carrier freelist.
+ *
+ * Driver must have already allocated memory and set 'carrier_buf'.
+ */
+ ASC_ASSERT(asc_dvc->carrier_buf != NULL);
+
+ carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf);
+ asc_dvc->carr_freelist = NULL;
+ if (carrp == (ADV_CARR_T *) asc_dvc->carrier_buf)
+ {
+ buf_size = ADV_CARRIER_BUFSIZE;
+ } else
+ {
+ buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T);
+ }
+
+ do {
+ /*
+ * Get physical address of the carrier 'carrp'.
+ */
+ contig_len = sizeof(ADV_CARR_T);
+ carr_paddr = cpu_to_le32(DvcGetPhyAddr(asc_dvc, NULL, (uchar *) carrp,
+ (ADV_SDCNT *) &contig_len, ADV_IS_CARRIER_FLAG));
+
+ buf_size -= sizeof(ADV_CARR_T);
+
+ /*
+ * If the current carrier is not physically contiguous, then
+ * maybe there was a page crossing. Try the next carrier aligned
+ * start address.
+ */
+ if (contig_len < sizeof(ADV_CARR_T))
+ {
+ carrp++;
+ continue;
+ }
+
+ carrp->carr_pa = carr_paddr;
+ carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp));
+
+ /*
+ * Insert the carrier at the beginning of the freelist.
+ */
+ carrp->next_vpa = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
+ asc_dvc->carr_freelist = carrp;
+
+ carrp++;
+ }
+ while (buf_size > 0);
+
+ /*
+ * Set-up the Host->RISC Initiator Command Queue (ICQ).
+ */
+
+ if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
+
+ /*
+ * The first command issued will be placed in the stopper carrier.
+ */
+ asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC ICQ physical address start value.
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
+
+ /*
+ * Set-up the RISC->Host Initiator Response Queue (IRQ).
+ */
+ if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
+
+ /*
+ * The first command completed by the RISC will be placed in
+ * the stopper.
+ *
+ * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
+ * completed the RISC will set the ASC_RQ_STOPPER bit.
+ */
+ asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC IRQ physical address start value.
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
+ asc_dvc->carr_pending_cnt = 0;
+
+ AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
+ (ADV_INTR_ENABLE_HOST_INTR | ADV_INTR_ENABLE_GLOBAL_INTR));
+
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
+ AdvWriteWordRegister(iop_base, IOPW_PC, word);
+
+ /* finally, finally, gentlemen, start your engine */
+ AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
+
+ /*
+ * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
+ * Resets should be performed. The RISC has to be running
+ * to issue a SCSI Bus Reset.
+ */
+ if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS)
+ {
+ /*
+ * If the BIOS Signature is present in memory, restore the
+ * BIOS Handshake Configuration Table and do not perform
+ * a SCSI Bus Reset.
+ */
+ if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM)/2] == 0x55AA)
+ {
+ /*
+ * Restore per TID negotiated values.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+ } else
+ {
+ if (AdvResetSB(asc_dvc) != ADV_TRUE)
+ {
+ warn_code = ASC_WARN_BUSRESET_ERROR;
+ }
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Initialize the ASC-38C0800.
+ *
+ * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Needed after initialization for error recovery.
+ */
+STATIC int
+AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADV_DCNT sum;
+ int begin_addr;
+ int end_addr;
+ ushort code_sum;
+ int word;
+ int j;
+ int adv_asc38C0800_expanded_size;
+ ADV_CARR_T *carrp;
+ ADV_DCNT contig_len;
+ ADV_SDCNT buf_size;
+ ADV_PADDR carr_paddr;
+ int i;
+ ushort scsi_cfg1;
+ uchar byte;
+ uchar tid;
+ ushort bios_mem[ASC_MC_BIOSLEN/2]; /* BIOS RISC Memory 0x40-0x8F. */
+ ushort wdtr_able, sdtr_able, tagqng_able;
+ uchar max_cmd[ADV_MAX_TID + 1];
+
+ /* If there is already an error, don't continue. */
+ if (asc_dvc->err_code != 0)
+ {
+ return ADV_ERROR;
+ }
+
+ /*
+ * The caller must set 'chip_type' to ADV_CHIP_ASC38C0800.
+ */
+ if (asc_dvc->chip_type != ADV_CHIP_ASC38C0800)
+ {
+ asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE;
+ return ADV_ERROR;
+ }
+
+ warn_code = 0;
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * Save the RISC memory BIOS region before writing the microcode.
+ * The BIOS may already be loaded and using its RISC LRAM region
+ * so its region must be saved and restored.
+ *
+ * Note: This code makes the assumption, which is currently true,
+ * that a chip reset does not clear RISC LRAM.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Save current per TID negotiated values.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+
+ /*
+ * RAM BIST (RAM Built-In Self Test)
+ *
+ * Address : I/O base + offset 0x38h register (byte).
+ * Function: Bit 7-6(RW) : RAM mode
+ * Normal Mode : 0x00
+ * Pre-test Mode : 0x40
+ * RAM Test Mode : 0x80
+ * Bit 5 : unused
+ * Bit 4(RO) : Done bit
+ * Bit 3-0(RO) : Status
+ * Host Error : 0x08
+ * Int_RAM Error : 0x04
+ * RISC Error : 0x02
+ * SCSI Error : 0x01
+ * No Error : 0x00
+ *
+ * Note: RAM BIST code should be put right here, before loading the
+ * microcode and after saving the RISC memory BIOS region.
+ */
+
+ /*
+ * LRAM Pre-test
+ *
+ * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds.
+ * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return
+ * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset
+ * to NORMAL_MODE, return an error too.
+ */
+ for (i = 0; i < 2; i++)
+ {
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before reading back. */
+ byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
+ if ((byte & RAM_TEST_DONE) == 0 || (byte & 0x0F) != PRE_TEST_VALUE)
+ {
+ asc_dvc->err_code |= ASC_IERR_BIST_PRE_TEST;
+ return ADV_ERROR;
+ }
+
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before reading back. */
+ if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST)
+ != NORMAL_VALUE)
+ {
+ asc_dvc->err_code |= ASC_IERR_BIST_PRE_TEST;
+ return ADV_ERROR;
+ }
+ }
+
+ /*
+ * LRAM Test - It takes about 1.5 ms to run through the test.
+ *
+ * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds.
+ * If Done bit not set or Status not 0, save register byte, set the
+ * err_code, and return an error.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before checking status. */
+
+ byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
+ if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0)
+ {
+ /* Get here if Done bit not set or Status not 0. */
+ asc_dvc->bist_err_code = byte; /* for BIOS display message */
+ asc_dvc->err_code |= ASC_IERR_BIST_RAM_TEST;
+ return ADV_ERROR;
+ }
+
+ /* We need to reset back to normal mode after LRAM test passes. */
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
+
+ /*
+ * Load the Microcode
+ *
+ * Write the microcode image to RISC memory starting at address 0.
+ *
+ */
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+
+ /* Assume the following compressed format of the microcode buffer:
+ *
+ * 254 word (508 byte) table indexed by byte code followed
+ * by the following byte codes:
+ *
+ * 1-Byte Code:
+ * 00: Emit word 0 in table.
+ * 01: Emit word 1 in table.
+ * .
+ * FD: Emit word 253 in table.
+ *
+ * Multi-Byte Code:
+ * FE WW WW: (3 byte code) Word to emit is the next word WW WW.
+ * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW.
+ */
+ word = 0;
+ for (i = 253 * 2; i < _adv_asc38C0800_size; i++)
+ {
+ if (_adv_asc38C0800_buf[i] == 0xff)
+ {
+ for (j = 0; j < _adv_asc38C0800_buf[i + 1]; j++)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C0800_buf[i + 3] << 8) |
+ _adv_asc38C0800_buf[i + 2]));
+ word++;
+ }
+ i += 3;
+ } else if (_adv_asc38C0800_buf[i] == 0xfe)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C0800_buf[i + 2] << 8) |
+ _adv_asc38C0800_buf[i + 1]));
+ i += 2;
+ word++;
+ } else
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C0800_buf[(_adv_asc38C0800_buf[i] * 2) + 1] << 8) |
+ _adv_asc38C0800_buf[_adv_asc38C0800_buf[i] * 2]));
+ word++;
+ }
+ }
+
+ /*
+ * Set 'word' for later use to clear the rest of memory and save
+ * the expanded mcode size.
+ */
+ word *= 2;
+ adv_asc38C0800_expanded_size = word;
+
+ /*
+ * Clear the rest of ASC-38C0800 Internal RAM (16KB).
+ */
+ for (; word < ADV_38C0800_MEMSIZE; word += 2)
+ {
+ AdvWriteWordAutoIncLram(iop_base, 0);
+ }
+
+ /*
+ * Verify the microcode checksum.
+ */
+ sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+
+ for (word = 0; word < adv_asc38C0800_expanded_size; word += 2)
+ {
+ sum += AdvReadWordAutoIncLram(iop_base);
+ }
+ ASC_DBG2(1, "AdvInitAsc38C0800Driver: word %d, i %d\n", word, i);
+
+ ASC_DBG2(1,
+ "AdvInitAsc38C0800Driver: sum 0x%lx, _adv_asc38C0800_chksum 0x%lx\n",
+ (ulong) sum, (ulong) _adv_asc38C0800_chksum);
+
+ if (sum != _adv_asc38C0800_chksum)
+ {
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Restore the RISC memory BIOS region.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Calculate and write the microcode code checksum to the microcode
+ * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
+ */
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
+ AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
+ code_sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
+ for (word = begin_addr; word < end_addr; word += 2)
+ {
+ code_sum += AdvReadWordAutoIncLram(iop_base);
+ }
+ AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
+
+ /*
+ * Read microcode version and date.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, asc_dvc->cfg->mcode_date);
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, asc_dvc->cfg->mcode_version);
+
+ /*
+ * Set the chip type to indicate the ASC38C0800.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C0800);
+
+ /*
+ * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
+ * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
+ * cable detection and then we are able to read C_DET[3:0].
+ *
+ * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
+ * Microcode Default Value' section below.
+ */
+ scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
+ AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, scsi_cfg1 | DIS_TERM_DRV);
+
+ /*
+ * If the PCI Configuration Command Register "Parity Error Response
+ * Control" Bit was clear (0), then set the microcode variable
+ * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
+ * to ignore DMA parity errors.
+ */
+ if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ word |= CONTROL_FLAG_IGNORE_PERR;
+ AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ }
+
+ /*
+ * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and START_CTL_TH [3:2]
+ * bits for the default FIFO threshold.
+ *
+ * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes.
+ *
+ * For DMA Errata #4 set the BC_THRESH_ENB bit.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
+ BC_THRESH_ENB | FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM);
+
+ /*
+ * Microcode operating variables for WDTR, SDTR, and command tag
+ * queuing will be set in AdvInquiryHandling() based on what a
+ * device reports it is capable of in Inquiry byte 7.
+ *
+ * If SCSI Bus Resets have been disabled, then directly set
+ * SDTR and WDTR from the EEPROM configuration. This will allow
+ * the BIOS and warm boot to work without a SCSI bus hang on
+ * the Inquiry caused by host and target mismatched DTR values.
+ * Without the SCSI Bus Reset, before an Inquiry a device can't
+ * be assumed to be in Asynchronous, Narrow mode.
+ */
+ if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, asc_dvc->wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, asc_dvc->sdtr_able);
+ }
+
+ /*
+ * Set microcode operating variables for DISC and SDTR_SPEED1,
+ * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM
+ * configuration values.
+ *
+ * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
+ * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
+ * without determining here whether the device supports SDTR.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, asc_dvc->cfg->disc_enable);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4);
+
+ /*
+ * Set SCSI_CFG0 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG0 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
+ PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
+ asc_dvc->chip_scsi_id);
+
+ /*
+ * Determine SCSI_CFG1 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ */
+
+ /* Read current SCSI_CFG1 Register value. */
+ scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
+
+ /*
+ * If the internal narrow cable is reversed all of the SCSI_CTRL
+ * register signals will be set. Check for and return an error if
+ * this condition is found.
+ */
+ if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07)
+ {
+ asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * All kind of combinations of devices attached to one of four connectors
+ * are acceptable except HVD device attached. For example, LVD device can
+ * be attached to SE connector while SE device attached to LVD connector.
+ * If LVD device attached to SE connector, it only runs up to Ultra speed.
+ *
+ * If an HVD device is attached to one of LVD connectors, return an error.
+ * However, there is no way to detect HVD device attached to SE connectors.
+ */
+ if (scsi_cfg1 & HVD)
+ {
+ asc_dvc->err_code |= ASC_IERR_HVD_DEVICE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * If either SE or LVD automatic termination control is enabled, then
+ * set the termination value based on a table listed in a_condor.h.
+ *
+ * If manual termination was specified with an EEPROM setting then
+ * 'termination' was set-up in AdvInitFrom38C0800EEPROM() and is ready to
+ * be 'ored' into SCSI_CFG1.
+ */
+ if ((asc_dvc->cfg->termination & TERM_SE) == 0)
+ {
+ /* SE automatic termination control is enabled. */
+ switch(scsi_cfg1 & C_DET_SE)
+ {
+ /* TERM_SE_HI: on, TERM_SE_LO: on */
+ case 0x1: case 0x2: case 0x3:
+ asc_dvc->cfg->termination |= TERM_SE;
+ break;
+
+ /* TERM_SE_HI: on, TERM_SE_LO: off */
+ case 0x0:
+ asc_dvc->cfg->termination |= TERM_SE_HI;
+ break;
+ }
+ }
+
+ if ((asc_dvc->cfg->termination & TERM_LVD) == 0)
+ {
+ /* LVD automatic termination control is enabled. */
+ switch(scsi_cfg1 & C_DET_LVD)
+ {
+ /* TERM_LVD_HI: on, TERM_LVD_LO: on */
+ case 0x4: case 0x8: case 0xC:
+ asc_dvc->cfg->termination |= TERM_LVD;
+ break;
+
+ /* TERM_LVD_HI: off, TERM_LVD_LO: off */
+ case 0x0:
+ break;
+ }
+ }
+
+ /*
+ * Clear any set TERM_SE and TERM_LVD bits.
+ */
+ scsi_cfg1 &= (~TERM_SE & ~TERM_LVD);
+
+ /*
+ * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'.
+ */
+ scsi_cfg1 |= (~asc_dvc->cfg->termination & 0xF0);
+
+ /*
+ * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE bits
+ * and set possibly modified termination control bits in the Microcode
+ * SCSI_CFG1 Register Value.
+ */
+ scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL & ~HVD_LVD_SE);
+
+ /*
+ * Set SCSI_CFG1 Microcode Default Value
+ *
+ * Set possibly modified termination control and reset DIS_TERM_DRV
+ * bits in the Microcode SCSI_CFG1 Register Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);
+
+ /*
+ * Set MEM_CFG Microcode Default Value
+ *
+ * The microcode will set the MEM_CFG register using this value
+ * after it is started below.
+ *
+ * MEM_CFG may be accessed as a word or byte, but only bits 0-7
+ * are defined.
+ *
+ * ASC-38C0800 has 16KB internal memory.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
+ BIOS_EN | RAM_SZ_16KB);
+
+ /*
+ * Set SEL_MASK Microcode Default Value
+ *
+ * The microcode will set the SEL_MASK register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
+ ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
+
+ /*
+ * Build the carrier freelist.
+ *
+ * Driver must have already allocated memory and set 'carrier_buf'.
+ */
+ ASC_ASSERT(asc_dvc->carrier_buf != NULL);
+
+ carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf);
+ asc_dvc->carr_freelist = NULL;
+ if (carrp == (ADV_CARR_T *) asc_dvc->carrier_buf)
+ {
+ buf_size = ADV_CARRIER_BUFSIZE;
+ } else
+ {
+ buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T);
+ }
+
+ do {
+ /*
+ * Get physical address for the carrier 'carrp'.
+ */
+ contig_len = sizeof(ADV_CARR_T);
+ carr_paddr = cpu_to_le32(DvcGetPhyAddr(asc_dvc, NULL, (uchar *) carrp,
+ (ADV_SDCNT *) &contig_len, ADV_IS_CARRIER_FLAG));
+
+ buf_size -= sizeof(ADV_CARR_T);
+
+ /*
+ * If the current carrier is not physically contiguous, then
+ * maybe there was a page crossing. Try the next carrier aligned
+ * start address.
+ */
+ if (contig_len < sizeof(ADV_CARR_T))
+ {
+ carrp++;
+ continue;
+ }
+
+ carrp->carr_pa = carr_paddr;
+ carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp));
+
+ /*
+ * Insert the carrier at the beginning of the freelist.
+ */
+ carrp->next_vpa = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
+ asc_dvc->carr_freelist = carrp;
+
+ carrp++;
+ }
+ while (buf_size > 0);
+
+ /*
+ * Set-up the Host->RISC Initiator Command Queue (ICQ).
+ */
+
+ if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
+
+ /*
+ * The first command issued will be placed in the stopper carrier.
+ */
+ asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC ICQ physical address start value.
+ * carr_pa is LE, must be native before write
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
+
+ /*
+ * Set-up the RISC->Host Initiator Response Queue (IRQ).
+ */
+ if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
+
+ /*
+ * The first command completed by the RISC will be placed in
+ * the stopper.
+ *
+ * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
+ * completed the RISC will set the ASC_RQ_STOPPER bit.
+ */
+ asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC IRQ physical address start value.
+ *
+ * carr_pa is LE, must be native before write *
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
+ asc_dvc->carr_pending_cnt = 0;
+
+ AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
+ (ADV_INTR_ENABLE_HOST_INTR | ADV_INTR_ENABLE_GLOBAL_INTR));
+
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
+ AdvWriteWordRegister(iop_base, IOPW_PC, word);
+
+ /* finally, finally, gentlemen, start your engine */
+ AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
+
+ /*
+ * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
+ * Resets should be performed. The RISC has to be running
+ * to issue a SCSI Bus Reset.
+ */
+ if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS)
+ {
+ /*
+ * If the BIOS Signature is present in memory, restore the
+ * BIOS Handshake Configuration Table and do not perform
+ * a SCSI Bus Reset.
+ */
+ if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM)/2] == 0x55AA)
+ {
+ /*
+ * Restore per TID negotiated values.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+ } else
+ {
+ if (AdvResetSB(asc_dvc) != ADV_TRUE)
+ {
+ warn_code = ASC_WARN_BUSRESET_ERROR;
+ }
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Initialize the ASC-38C1600.
+ *
+ * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Needed after initialization for error recovery.
+ */
+STATIC int
+AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADV_DCNT sum;
+ int begin_addr;
+ int end_addr;
+ ushort code_sum;
+ long word;
+ int j;
+ int adv_asc38C1600_expanded_size;
+ ADV_CARR_T *carrp;
+ ADV_DCNT contig_len;
+ ADV_SDCNT buf_size;
+ ADV_PADDR carr_paddr;
+ int i;
+ ushort scsi_cfg1;
+ uchar byte;
+ uchar tid;
+ ushort bios_mem[ASC_MC_BIOSLEN/2]; /* BIOS RISC Memory 0x40-0x8F. */
+ ushort wdtr_able, sdtr_able, ppr_able, tagqng_able;
+ uchar max_cmd[ASC_MAX_TID + 1];
+
+ /* If there is already an error, don't continue. */
+ if (asc_dvc->err_code != 0)
+ {
+ return ADV_ERROR;
+ }
+
+ /*
+ * The caller must set 'chip_type' to ADV_CHIP_ASC38C1600.
+ */
+ if (asc_dvc->chip_type != ADV_CHIP_ASC38C1600)
+ {
+ asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE;
+ return ADV_ERROR;
+ }
+
+ warn_code = 0;
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * Save the RISC memory BIOS region before writing the microcode.
+ * The BIOS may already be loaded and using its RISC LRAM region
+ * so its region must be saved and restored.
+ *
+ * Note: This code makes the assumption, which is currently true,
+ * that a chip reset does not clear RISC LRAM.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Save current per TID negotiated values.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ASC_MAX_TID; tid++)
+ {
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+
+ /*
+ * RAM BIST (Built-In Self Test)
+ *
+ * Address : I/O base + offset 0x38h register (byte).
+ * Function: Bit 7-6(RW) : RAM mode
+ * Normal Mode : 0x00
+ * Pre-test Mode : 0x40
+ * RAM Test Mode : 0x80
+ * Bit 5 : unused
+ * Bit 4(RO) : Done bit
+ * Bit 3-0(RO) : Status
+ * Host Error : 0x08
+ * Int_RAM Error : 0x04
+ * RISC Error : 0x02
+ * SCSI Error : 0x01
+ * No Error : 0x00
+ *
+ * Note: RAM BIST code should be put right here, before loading the
+ * microcode and after saving the RISC memory BIOS region.
+ */
+
+ /*
+ * LRAM Pre-test
+ *
+ * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds.
+ * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return
+ * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset
+ * to NORMAL_MODE, return an error too.
+ */
+ for (i = 0; i < 2; i++)
+ {
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before reading back. */
+ byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
+ if ((byte & RAM_TEST_DONE) == 0 || (byte & 0x0F) != PRE_TEST_VALUE)
+ {
+ asc_dvc->err_code |= ASC_IERR_BIST_PRE_TEST;
+ return ADV_ERROR;
+ }
+
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before reading back. */
+ if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST)
+ != NORMAL_VALUE)
+ {
+ asc_dvc->err_code |= ASC_IERR_BIST_PRE_TEST;
+ return ADV_ERROR;
+ }
+ }
+
+ /*
+ * LRAM Test - It takes about 1.5 ms to run through the test.
+ *
+ * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds.
+ * If Done bit not set or Status not 0, save register byte, set the
+ * err_code, and return an error.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE);
+ DvcSleepMilliSecond(10); /* Wait for 10ms before checking status. */
+
+ byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST);
+ if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0)
+ {
+ /* Get here if Done bit not set or Status not 0. */
+ asc_dvc->bist_err_code = byte; /* for BIOS display message */
+ asc_dvc->err_code |= ASC_IERR_BIST_RAM_TEST;
+ return ADV_ERROR;
+ }
+
+ /* We need to reset back to normal mode after LRAM test passes. */
+ AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE);
+
+ /*
+ * Load the Microcode
+ *
+ * Write the microcode image to RISC memory starting at address 0.
+ *
+ */
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+
+ /*
+ * Assume the following compressed format of the microcode buffer:
+ *
+ * 254 word (508 byte) table indexed by byte code followed
+ * by the following byte codes:
+ *
+ * 1-Byte Code:
+ * 00: Emit word 0 in table.
+ * 01: Emit word 1 in table.
+ * .
+ * FD: Emit word 253 in table.
+ *
+ * Multi-Byte Code:
+ * FE WW WW: (3 byte code) Word to emit is the next word WW WW.
+ * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW.
+ */
+ word = 0;
+ for (i = 253 * 2; i < _adv_asc38C1600_size; i++)
+ {
+ if (_adv_asc38C1600_buf[i] == 0xff)
+ {
+ for (j = 0; j < _adv_asc38C1600_buf[i + 1]; j++)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C1600_buf[i + 3] << 8) |
+ _adv_asc38C1600_buf[i + 2]));
+ word++;
+ }
+ i += 3;
+ } else if (_adv_asc38C1600_buf[i] == 0xfe)
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C1600_buf[i + 2] << 8) |
+ _adv_asc38C1600_buf[i + 1]));
+ i += 2;
+ word++;
+ } else
+ {
+ AdvWriteWordAutoIncLram(iop_base, (((ushort)
+ _adv_asc38C1600_buf[(_adv_asc38C1600_buf[i] * 2) + 1] << 8) |
+ _adv_asc38C1600_buf[_adv_asc38C1600_buf[i] * 2]));
+ word++;
+ }
+ }
+
+ /*
+ * Set 'word' for later use to clear the rest of memory and save
+ * the expanded mcode size.
+ */
+ word *= 2;
+ adv_asc38C1600_expanded_size = word;
+
+ /*
+ * Clear the rest of ASC-38C1600 Internal RAM (32KB).
+ */
+ for (; word < ADV_38C1600_MEMSIZE; word += 2)
+ {
+ AdvWriteWordAutoIncLram(iop_base, 0);
+ }
+
+ /*
+ * Verify the microcode checksum.
+ */
+ sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
+
+ for (word = 0; word < adv_asc38C1600_expanded_size; word += 2)
+ {
+ sum += AdvReadWordAutoIncLram(iop_base);
+ }
+
+ if (sum != _adv_asc38C1600_chksum)
+ {
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Restore the RISC memory BIOS region.
+ */
+ for (i = 0; i < ASC_MC_BIOSLEN/2; i++)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), bios_mem[i]);
+ }
+
+ /*
+ * Calculate and write the microcode code checksum to the microcode
+ * code checksum location ASC_MC_CODE_CHK_SUM (0x2C).
+ */
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr);
+ AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr);
+ code_sum = 0;
+ AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr);
+ for (word = begin_addr; word < end_addr; word += 2)
+ {
+ code_sum += AdvReadWordAutoIncLram(iop_base);
+ }
+ AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum);
+
+ /*
+ * Read microcode version and date.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, asc_dvc->cfg->mcode_date);
+ AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, asc_dvc->cfg->mcode_version);
+
+ /*
+ * Set the chip type to indicate the ASC38C1600.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C1600);
+
+ /*
+ * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
+ * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
+ * cable detection and then we are able to read C_DET[3:0].
+ *
+ * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
+ * Microcode Default Value' section below.
+ */
+ scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
+ AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, scsi_cfg1 | DIS_TERM_DRV);
+
+ /*
+ * If the PCI Configuration Command Register "Parity Error Response
+ * Control" Bit was clear (0), then set the microcode variable
+ * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
+ * to ignore DMA parity errors.
+ */
+ if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ word |= CONTROL_FLAG_IGNORE_PERR;
+ AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ }
+
+ /*
+ * If the BIOS control flag AIPP (Asynchronous Information
+ * Phase Protection) disable bit is not set, then set the firmware
+ * 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to enable
+ * AIPP checking and encoding.
+ */
+ if ((asc_dvc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ word |= CONTROL_FLAG_ENABLE_AIPP;
+ AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word);
+ }
+
+ /*
+ * For ASC-38C1600 use DMA_CFG0 default values: FIFO_THRESH_80B [6:4],
+ * and START_CTL_TH [3:2].
+ */
+ AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0,
+ FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM);
+
+ /*
+ * Microcode operating variables for WDTR, SDTR, and command tag
+ * queuing will be set in AdvInquiryHandling() based on what a
+ * device reports it is capable of in Inquiry byte 7.
+ *
+ * If SCSI Bus Resets have been disabled, then directly set
+ * SDTR and WDTR from the EEPROM configuration. This will allow
+ * the BIOS and warm boot to work without a SCSI bus hang on
+ * the Inquiry caused by host and target mismatched DTR values.
+ * Without the SCSI Bus Reset, before an Inquiry a device can't
+ * be assumed to be in Asynchronous, Narrow mode.
+ */
+ if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, asc_dvc->wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, asc_dvc->sdtr_able);
+ }
+
+ /*
+ * Set microcode operating variables for DISC and SDTR_SPEED1,
+ * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM
+ * configuration values.
+ *
+ * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
+ * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
+ * without determining here whether the device supports SDTR.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, asc_dvc->cfg->disc_enable);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4);
+
+ /*
+ * Set SCSI_CFG0 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG0 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0,
+ PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN |
+ asc_dvc->chip_scsi_id);
+
+ /*
+ * Calculate SCSI_CFG1 Microcode Default Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ *
+ * Each ASC-38C1600 function has only two cable detect bits.
+ * The bus mode override bits are in IOPB_SOFT_OVER_WR.
+ */
+ scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1);
+
+ /*
+ * If the cable is reversed all of the SCSI_CTRL register signals
+ * will be set. Check for and return an error if this condition is
+ * found.
+ */
+ if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07)
+ {
+ asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Each ASC-38C1600 function has two connectors. Only an HVD device
+ * can not be connected to either connector. An LVD device or SE device
+ * may be connected to either connecor. If an SE device is connected,
+ * then at most Ultra speed (20 Mhz) can be used on both connectors.
+ *
+ * If an HVD device is attached, return an error.
+ */
+ if (scsi_cfg1 & HVD)
+ {
+ asc_dvc->err_code |= ASC_IERR_HVD_DEVICE;
+ return ADV_ERROR;
+ }
+
+ /*
+ * Each function in the ASC-38C1600 uses only the SE cable detect and
+ * termination because there are two connectors for each function. Each
+ * function may use either LVD or SE mode. Corresponding the SE automatic
+ * termination control EEPROM bits are used for each function. Each
+ * function has its own EEPROM. If SE automatic control is enabled for
+ * the function, then set the termination value based on a table listed
+ * in a_condor.h.
+ *
+ * If manual termination is specified in the EEPROM for the function,
+ * then 'termination' was set-up in AscInitFrom38C1600EEPROM() and is
+ * ready to be 'ored' into SCSI_CFG1.
+ */
+ if ((asc_dvc->cfg->termination & TERM_SE) == 0)
+ {
+ /* SE automatic termination control is enabled. */
+ switch(scsi_cfg1 & C_DET_SE)
+ {
+ /* TERM_SE_HI: on, TERM_SE_LO: on */
+ case 0x1: case 0x2: case 0x3:
+ asc_dvc->cfg->termination |= TERM_SE;
+ break;
+
+ case 0x0:
+ if (ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info) == 0)
+ {
+ /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */
+ }
+ else
+ {
+ /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */
+ asc_dvc->cfg->termination |= TERM_SE_HI;
+ }
+ break;
+ }
+ }
+
+ /*
+ * Clear any set TERM_SE bits.
+ */
+ scsi_cfg1 &= ~TERM_SE;
+
+ /*
+ * Invert the TERM_SE bits and then set 'scsi_cfg1'.
+ */
+ scsi_cfg1 |= (~asc_dvc->cfg->termination & TERM_SE);
+
+ /*
+ * Clear Big Endian and Terminator Polarity bits and set possibly
+ * modified termination control bits in the Microcode SCSI_CFG1
+ * Register Value.
+ *
+ * Big Endian bit is not used even on big endian machines.
+ */
+ scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL);
+
+ /*
+ * Set SCSI_CFG1 Microcode Default Value
+ *
+ * Set possibly modified termination control bits in the Microcode
+ * SCSI_CFG1 Register Value.
+ *
+ * The microcode will set the SCSI_CFG1 register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);
+
+ /*
+ * Set MEM_CFG Microcode Default Value
+ *
+ * The microcode will set the MEM_CFG register using this value
+ * after it is started below.
+ *
+ * MEM_CFG may be accessed as a word or byte, but only bits 0-7
+ * are defined.
+ *
+ * ASC-38C1600 has 32KB internal memory.
+ *
+ * XXX - Since ASC38C1600 Rev.3 has a Local RAM failure issue, we come
+ * out a special 16K Adv Library and Microcode version. After the issue
+ * resolved, we should turn back to the 32K support. Both a_condor.h and
+ * mcode.sas files also need to be updated.
+ *
+ * AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG,
+ * BIOS_EN | RAM_SZ_32KB);
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, BIOS_EN | RAM_SZ_16KB);
+
+ /*
+ * Set SEL_MASK Microcode Default Value
+ *
+ * The microcode will set the SEL_MASK register using this value
+ * after it is started below.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK,
+ ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id));
+
+ /*
+ * Build the carrier freelist.
+ *
+ * Driver must have already allocated memory and set 'carrier_buf'.
+ */
+
+ ASC_ASSERT(asc_dvc->carrier_buf != NULL);
+
+ carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf);
+ asc_dvc->carr_freelist = NULL;
+ if (carrp == (ADV_CARR_T *) asc_dvc->carrier_buf)
+ {
+ buf_size = ADV_CARRIER_BUFSIZE;
+ } else
+ {
+ buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T);
+ }
+
+ do {
+ /*
+ * Get physical address for the carrier 'carrp'.
+ */
+ contig_len = sizeof(ADV_CARR_T);
+ carr_paddr = cpu_to_le32(DvcGetPhyAddr(asc_dvc, NULL, (uchar *) carrp,
+ (ADV_SDCNT *) &contig_len, ADV_IS_CARRIER_FLAG));
+
+ buf_size -= sizeof(ADV_CARR_T);
+
+ /*
+ * If the current carrier is not physically contiguous, then
+ * maybe there was a page crossing. Try the next carrier aligned
+ * start address.
+ */
+ if (contig_len < sizeof(ADV_CARR_T))
+ {
+ carrp++;
+ continue;
+ }
+
+ carrp->carr_pa = carr_paddr;
+ carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp));
+
+ /*
+ * Insert the carrier at the beginning of the freelist.
+ */
+ carrp->next_vpa = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
+ asc_dvc->carr_freelist = carrp;
+
+ carrp++;
+ }
+ while (buf_size > 0);
+
+ /*
+ * Set-up the Host->RISC Initiator Command Queue (ICQ).
+ */
+ if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
+
+ /*
+ * The first command issued will be placed in the stopper carrier.
+ */
+ asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC ICQ physical address start value. Initialize the
+ * COMMA register to the same value otherwise the RISC will
+ * prematurely detect a command is available.
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa);
+ AdvWriteDWordRegister(iop_base, IOPDW_COMMA,
+ le32_to_cpu(asc_dvc->icq_sp->carr_pa));
+
+ /*
+ * Set-up the RISC->Host Initiator Response Queue (IRQ).
+ */
+ if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL)
+ {
+ asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
+ return ADV_ERROR;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
+
+ /*
+ * The first command completed by the RISC will be placed in
+ * the stopper.
+ *
+ * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
+ * completed the RISC will set the ASC_RQ_STOPPER bit.
+ */
+ asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Set RISC IRQ physical address start value.
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa);
+ asc_dvc->carr_pending_cnt = 0;
+
+ AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES,
+ (ADV_INTR_ENABLE_HOST_INTR | ADV_INTR_ENABLE_GLOBAL_INTR));
+ AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word);
+ AdvWriteWordRegister(iop_base, IOPW_PC, word);
+
+ /* finally, finally, gentlemen, start your engine */
+ AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN);
+
+ /*
+ * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
+ * Resets should be performed. The RISC has to be running
+ * to issue a SCSI Bus Reset.
+ */
+ if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS)
+ {
+ /*
+ * If the BIOS Signature is present in memory, restore the
+ * per TID microcode operating variables.
+ */
+ if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM)/2] == 0x55AA)
+ {
+ /*
+ * Restore per TID negotiated values.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ASC_MAX_TID; tid++)
+ {
+ AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+ } else
+ {
+ if (AdvResetSB(asc_dvc) != ADV_TRUE)
+ {
+ warn_code = ASC_WARN_BUSRESET_ERROR;
+ }
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and
+ * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while
+ * all of this is done.
+ *
+ * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Note: Chip is stopped on entry.
+ */
+STATIC int __init
+AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADVEEP_3550_CONFIG eep_config;
+ int i;
+
+ iop_base = asc_dvc->iop_base;
+
+ warn_code = 0;
+
+ /*
+ * Read the board's EEPROM configuration.
+ *
+ * Set default values if a bad checksum is found.
+ */
+ if (AdvGet3550EEPConfig(iop_base, &eep_config) != eep_config.check_sum)
+ {
+ warn_code |= ASC_WARN_EEPROM_CHKSUM;
+
+ /*
+ * Set EEPROM default values.
+ */
+ for (i = 0; i < sizeof(ADVEEP_3550_CONFIG); i++)
+ {
+ *((uchar *) &eep_config + i) =
+ *((uchar *) &Default_3550_EEPROM_Config + i);
+ }
+
+ /*
+ * Assume the 6 byte board serial number that was read
+ * from EEPROM is correct even if the EEPROM checksum
+ * failed.
+ */
+ eep_config.serial_number_word3 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
+
+ eep_config.serial_number_word2 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
+
+ eep_config.serial_number_word1 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
+
+ AdvSet3550EEPConfig(iop_base, &eep_config);
+ }
+ /*
+ * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the
+ * EEPROM configuration that was read.
+ *
+ * This is the mapping of EEPROM fields to Adv Library fields.
+ */
+ asc_dvc->wdtr_able = eep_config.wdtr_able;
+ asc_dvc->sdtr_able = eep_config.sdtr_able;
+ asc_dvc->ultra_able = eep_config.ultra_able;
+ asc_dvc->tagqng_able = eep_config.tagqng_able;
+ asc_dvc->cfg->disc_enable = eep_config.disc_enable;
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+ asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID);
+ asc_dvc->start_motor = eep_config.start_motor;
+ asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
+ asc_dvc->bios_ctrl = eep_config.bios_ctrl;
+ asc_dvc->no_scam = eep_config.scam_tolerant;
+ asc_dvc->cfg->serial1 = eep_config.serial_number_word1;
+ asc_dvc->cfg->serial2 = eep_config.serial_number_word2;
+ asc_dvc->cfg->serial3 = eep_config.serial_number_word3;
+
+ /*
+ * Set the host maximum queuing (max. 253, min. 16) and the per device
+ * maximum queuing (max. 63, min. 4).
+ */
+ if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_host_qng == 0)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else
+ {
+ eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
+ }
+ }
+
+ if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_dvc_qng == 0)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
+ }
+ }
+
+ /*
+ * If 'max_dvc_qng' is greater than 'max_host_qng', then
+ * set 'max_dvc_qng' to 'max_host_qng'.
+ */
+ if (eep_config.max_dvc_qng > eep_config.max_host_qng)
+ {
+ eep_config.max_dvc_qng = eep_config.max_host_qng;
+ }
+
+ /*
+ * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng'
+ * values based on possibly adjusted EEPROM values.
+ */
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+
+
+ /*
+ * If the EEPROM 'termination' field is set to automatic (0), then set
+ * the ADV_DVC_CFG 'termination' field to automatic also.
+ *
+ * If the termination is specified with a non-zero 'termination'
+ * value check that a legal value is set and set the ADV_DVC_CFG
+ * 'termination' field appropriately.
+ */
+ if (eep_config.termination == 0)
+ {
+ asc_dvc->cfg->termination = 0; /* auto termination */
+ } else
+ {
+ /* Enable manual control with low off / high off. */
+ if (eep_config.termination == 1)
+ {
+ asc_dvc->cfg->termination = TERM_CTL_SEL;
+
+ /* Enable manual control with low off / high on. */
+ } else if (eep_config.termination == 2)
+ {
+ asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H;
+
+ /* Enable manual control with low on / high on. */
+ } else if (eep_config.termination == 3)
+ {
+ asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H | TERM_CTL_L;
+ } else
+ {
+ /*
+ * The EEPROM 'termination' field contains a bad value. Use
+ * automatic termination instead.
+ */
+ asc_dvc->cfg->termination = 0;
+ warn_code |= ASC_WARN_EEPROM_TERMINATION;
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and
+ * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while
+ * all of this is done.
+ *
+ * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Note: Chip is stopped on entry.
+ */
+STATIC int __init
+AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADVEEP_38C0800_CONFIG eep_config;
+ int i;
+ uchar tid, termination;
+ ushort sdtr_speed = 0;
+
+ iop_base = asc_dvc->iop_base;
+
+ warn_code = 0;
+
+ /*
+ * Read the board's EEPROM configuration.
+ *
+ * Set default values if a bad checksum is found.
+ */
+ if (AdvGet38C0800EEPConfig(iop_base, &eep_config) != eep_config.check_sum)
+ {
+ warn_code |= ASC_WARN_EEPROM_CHKSUM;
+
+ /*
+ * Set EEPROM default values.
+ */
+ for (i = 0; i < sizeof(ADVEEP_38C0800_CONFIG); i++)
+ {
+ *((uchar *) &eep_config + i) =
+ *((uchar *) &Default_38C0800_EEPROM_Config + i);
+ }
+
+ /*
+ * Assume the 6 byte board serial number that was read
+ * from EEPROM is correct even if the EEPROM checksum
+ * failed.
+ */
+ eep_config.serial_number_word3 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
+
+ eep_config.serial_number_word2 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
+
+ eep_config.serial_number_word1 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
+
+ AdvSet38C0800EEPConfig(iop_base, &eep_config);
+ }
+ /*
+ * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the
+ * EEPROM configuration that was read.
+ *
+ * This is the mapping of EEPROM fields to Adv Library fields.
+ */
+ asc_dvc->wdtr_able = eep_config.wdtr_able;
+ asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1;
+ asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2;
+ asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3;
+ asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4;
+ asc_dvc->tagqng_able = eep_config.tagqng_able;
+ asc_dvc->cfg->disc_enable = eep_config.disc_enable;
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+ asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID);
+ asc_dvc->start_motor = eep_config.start_motor;
+ asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
+ asc_dvc->bios_ctrl = eep_config.bios_ctrl;
+ asc_dvc->no_scam = eep_config.scam_tolerant;
+ asc_dvc->cfg->serial1 = eep_config.serial_number_word1;
+ asc_dvc->cfg->serial2 = eep_config.serial_number_word2;
+ asc_dvc->cfg->serial3 = eep_config.serial_number_word3;
+
+ /*
+ * For every Target ID if any of its 'sdtr_speed[1234]' bits
+ * are set, then set an 'sdtr_able' bit for it.
+ */
+ asc_dvc->sdtr_able = 0;
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ if (tid == 0)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed1;
+ } else if (tid == 4)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed2;
+ } else if (tid == 8)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed3;
+ } else if (tid == 12)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed4;
+ }
+ if (sdtr_speed & ADV_MAX_TID)
+ {
+ asc_dvc->sdtr_able |= (1 << tid);
+ }
+ sdtr_speed >>= 4;
+ }
+
+ /*
+ * Set the host maximum queuing (max. 253, min. 16) and the per device
+ * maximum queuing (max. 63, min. 4).
+ */
+ if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_host_qng == 0)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else
+ {
+ eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
+ }
+ }
+
+ if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_dvc_qng == 0)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
+ }
+ }
+
+ /*
+ * If 'max_dvc_qng' is greater than 'max_host_qng', then
+ * set 'max_dvc_qng' to 'max_host_qng'.
+ */
+ if (eep_config.max_dvc_qng > eep_config.max_host_qng)
+ {
+ eep_config.max_dvc_qng = eep_config.max_host_qng;
+ }
+
+ /*
+ * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng'
+ * values based on possibly adjusted EEPROM values.
+ */
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+
+ /*
+ * If the EEPROM 'termination' field is set to automatic (0), then set
+ * the ADV_DVC_CFG 'termination' field to automatic also.
+ *
+ * If the termination is specified with a non-zero 'termination'
+ * value check that a legal value is set and set the ADV_DVC_CFG
+ * 'termination' field appropriately.
+ */
+ if (eep_config.termination_se == 0)
+ {
+ termination = 0; /* auto termination for SE */
+ } else
+ {
+ /* Enable manual control with low off / high off. */
+ if (eep_config.termination_se == 1)
+ {
+ termination = 0;
+
+ /* Enable manual control with low off / high on. */
+ } else if (eep_config.termination_se == 2)
+ {
+ termination = TERM_SE_HI;
+
+ /* Enable manual control with low on / high on. */
+ } else if (eep_config.termination_se == 3)
+ {
+ termination = TERM_SE;
+ } else
+ {
+ /*
+ * The EEPROM 'termination_se' field contains a bad value.
+ * Use automatic termination instead.
+ */
+ termination = 0;
+ warn_code |= ASC_WARN_EEPROM_TERMINATION;
+ }
+ }
+
+ if (eep_config.termination_lvd == 0)
+ {
+ asc_dvc->cfg->termination = termination; /* auto termination for LVD */
+ } else
+ {
+ /* Enable manual control with low off / high off. */
+ if (eep_config.termination_lvd == 1)
+ {
+ asc_dvc->cfg->termination = termination;
+
+ /* Enable manual control with low off / high on. */
+ } else if (eep_config.termination_lvd == 2)
+ {
+ asc_dvc->cfg->termination = termination | TERM_LVD_HI;
+
+ /* Enable manual control with low on / high on. */
+ } else if (eep_config.termination_lvd == 3)
+ {
+ asc_dvc->cfg->termination =
+ termination | TERM_LVD;
+ } else
+ {
+ /*
+ * The EEPROM 'termination_lvd' field contains a bad value.
+ * Use automatic termination instead.
+ */
+ asc_dvc->cfg->termination = termination;
+ warn_code |= ASC_WARN_EEPROM_TERMINATION;
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Read the board's EEPROM configuration. Set fields in ASC_DVC_VAR and
+ * ASC_DVC_CFG based on the EEPROM settings. The chip is stopped while
+ * all of this is done.
+ *
+ * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR.
+ *
+ * For a non-fatal error return a warning code. If there are no warnings
+ * then 0 is returned.
+ *
+ * Note: Chip is stopped on entry.
+ */
+STATIC int __init
+AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ ushort warn_code;
+ ADVEEP_38C1600_CONFIG eep_config;
+ int i;
+ uchar tid, termination;
+ ushort sdtr_speed = 0;
+
+ iop_base = asc_dvc->iop_base;
+
+ warn_code = 0;
+
+ /*
+ * Read the board's EEPROM configuration.
+ *
+ * Set default values if a bad checksum is found.
+ */
+ if (AdvGet38C1600EEPConfig(iop_base, &eep_config) != eep_config.check_sum)
+ {
+ warn_code |= ASC_WARN_EEPROM_CHKSUM;
+
+ /*
+ * Set EEPROM default values.
+ */
+ for (i = 0; i < sizeof(ADVEEP_38C1600_CONFIG); i++)
+ {
+ if (i == 1 && ASC_PCI_ID2FUNC(asc_dvc->cfg->pci_slot_info) != 0)
+ {
+ /*
+ * Set Function 1 EEPROM Word 0 MSB
+ *
+ * Clear the BIOS_ENABLE (bit 14) and INTAB (bit 11)
+ * EEPROM bits.
+ *
+ * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60 and
+ * old Mac system booting problem. The Expansion ROM must
+ * be disabled in Function 1 for these systems.
+ *
+ */
+ *((uchar *) &eep_config + i) =
+ ((*((uchar *) &Default_38C1600_EEPROM_Config + i)) &
+ (~(((ADV_EEPROM_BIOS_ENABLE | ADV_EEPROM_INTAB) >> 8) &
+ 0xFF)));
+
+ /*
+ * Set the INTAB (bit 11) if the GPIO 0 input indicates
+ * the Function 1 interrupt line is wired to INTA.
+ *
+ * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input:
+ * 1 - Function 1 interrupt line wired to INT A.
+ * 0 - Function 1 interrupt line wired to INT B.
+ *
+ * Note: Adapter boards always have Function 0 wired to INTA.
+ * Put all 5 GPIO bits in input mode and then read
+ * their input values.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0);
+ if (AdvReadByteRegister(iop_base, IOPB_GPIO_DATA) & 0x01)
+ {
+ /* Function 1 interrupt wired to INTA; Set EEPROM bit. */
+ *((uchar *) &eep_config + i) |=
+ ((ADV_EEPROM_INTAB >> 8) & 0xFF);
+ }
+ }
+ else
+ {
+ *((uchar *) &eep_config + i) =
+ *((uchar *) &Default_38C1600_EEPROM_Config + i);
+ }
+ }
+
+ /*
+ * Assume the 6 byte board serial number that was read
+ * from EEPROM is correct even if the EEPROM checksum
+ * failed.
+ */
+ eep_config.serial_number_word3 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
+
+ eep_config.serial_number_word2 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
+
+ eep_config.serial_number_word1 =
+ AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
+
+ AdvSet38C1600EEPConfig(iop_base, &eep_config);
+ }
+
+ /*
+ * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the
+ * EEPROM configuration that was read.
+ *
+ * This is the mapping of EEPROM fields to Adv Library fields.
+ */
+ asc_dvc->wdtr_able = eep_config.wdtr_able;
+ asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1;
+ asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2;
+ asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3;
+ asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4;
+ asc_dvc->ppr_able = 0;
+ asc_dvc->tagqng_able = eep_config.tagqng_able;
+ asc_dvc->cfg->disc_enable = eep_config.disc_enable;
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+ asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ASC_MAX_TID);
+ asc_dvc->start_motor = eep_config.start_motor;
+ asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay;
+ asc_dvc->bios_ctrl = eep_config.bios_ctrl;
+ asc_dvc->no_scam = eep_config.scam_tolerant;
+
+ /*
+ * For every Target ID if any of its 'sdtr_speed[1234]' bits
+ * are set, then set an 'sdtr_able' bit for it.
+ */
+ asc_dvc->sdtr_able = 0;
+ for (tid = 0; tid <= ASC_MAX_TID; tid++)
+ {
+ if (tid == 0)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed1;
+ } else if (tid == 4)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed2;
+ } else if (tid == 8)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed3;
+ } else if (tid == 12)
+ {
+ sdtr_speed = asc_dvc->sdtr_speed4;
+ }
+ if (sdtr_speed & ASC_MAX_TID)
+ {
+ asc_dvc->sdtr_able |= (1 << tid);
+ }
+ sdtr_speed >>= 4;
+ }
+
+ /*
+ * Set the host maximum queuing (max. 253, min. 16) and the per device
+ * maximum queuing (max. 63, min. 4).
+ */
+ if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_host_qng == 0)
+ {
+ eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG;
+ } else
+ {
+ eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG;
+ }
+ }
+
+ if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG)
+ {
+ /* If the value is zero, assume it is uninitialized. */
+ if (eep_config.max_dvc_qng == 0)
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG;
+ } else
+ {
+ eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG;
+ }
+ }
+
+ /*
+ * If 'max_dvc_qng' is greater than 'max_host_qng', then
+ * set 'max_dvc_qng' to 'max_host_qng'.
+ */
+ if (eep_config.max_dvc_qng > eep_config.max_host_qng)
+ {
+ eep_config.max_dvc_qng = eep_config.max_host_qng;
+ }
+
+ /*
+ * Set ASC_DVC_VAR 'max_host_qng' and ASC_DVC_VAR 'max_dvc_qng'
+ * values based on possibly adjusted EEPROM values.
+ */
+ asc_dvc->max_host_qng = eep_config.max_host_qng;
+ asc_dvc->max_dvc_qng = eep_config.max_dvc_qng;
+
+ /*
+ * If the EEPROM 'termination' field is set to automatic (0), then set
+ * the ASC_DVC_CFG 'termination' field to automatic also.
+ *
+ * If the termination is specified with a non-zero 'termination'
+ * value check that a legal value is set and set the ASC_DVC_CFG
+ * 'termination' field appropriately.
+ */
+ if (eep_config.termination_se == 0)
+ {
+ termination = 0; /* auto termination for SE */
+ } else
+ {
+ /* Enable manual control with low off / high off. */
+ if (eep_config.termination_se == 1)
+ {
+ termination = 0;
+
+ /* Enable manual control with low off / high on. */
+ } else if (eep_config.termination_se == 2)
+ {
+ termination = TERM_SE_HI;
+
+ /* Enable manual control with low on / high on. */
+ } else if (eep_config.termination_se == 3)
+ {
+ termination = TERM_SE;
+ } else
+ {
+ /*
+ * The EEPROM 'termination_se' field contains a bad value.
+ * Use automatic termination instead.
+ */
+ termination = 0;
+ warn_code |= ASC_WARN_EEPROM_TERMINATION;
+ }
+ }
+
+ if (eep_config.termination_lvd == 0)
+ {
+ asc_dvc->cfg->termination = termination; /* auto termination for LVD */
+ } else
+ {
+ /* Enable manual control with low off / high off. */
+ if (eep_config.termination_lvd == 1)
+ {
+ asc_dvc->cfg->termination = termination;
+
+ /* Enable manual control with low off / high on. */
+ } else if (eep_config.termination_lvd == 2)
+ {
+ asc_dvc->cfg->termination = termination | TERM_LVD_HI;
+
+ /* Enable manual control with low on / high on. */
+ } else if (eep_config.termination_lvd == 3)
+ {
+ asc_dvc->cfg->termination =
+ termination | TERM_LVD;
+ } else
+ {
+ /*
+ * The EEPROM 'termination_lvd' field contains a bad value.
+ * Use automatic termination instead.
+ */
+ asc_dvc->cfg->termination = termination;
+ warn_code |= ASC_WARN_EEPROM_TERMINATION;
+ }
+ }
+
+ return warn_code;
+}
+
+/*
+ * Read EEPROM configuration into the specified buffer.
+ *
+ * Return a checksum based on the EEPROM configuration read.
+ */
+STATIC ushort __init
+AdvGet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
+{
+ ushort wval, chksum;
+ ushort *wbuf;
+ int eep_addr;
+ ushort *charfields;
+
+ charfields = (ushort *) &ADVEEP_3550_Config_Field_IsChar;
+ wbuf = (ushort *) cfg_buf;
+ chksum = 0;
+
+ for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
+ eep_addr < ADV_EEP_DVC_CFG_END;
+ eep_addr++, wbuf++)
+ {
+ wval = AdvReadEEPWord(iop_base, eep_addr);
+ chksum += wval; /* Checksum is calculated from word values. */
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(wval);
+ } else {
+ *wbuf = wval;
+ }
+ }
+ /* Read checksum word. */
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ wbuf++; charfields++;
+
+ /* Read rest of EEPROM not covered by the checksum. */
+ for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
+ eep_addr < ADV_EEP_MAX_WORD_ADDR;
+ eep_addr++, wbuf++)
+ {
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(*wbuf);
+ }
+ }
+ return chksum;
+}
+
+/*
+ * Read EEPROM configuration into the specified buffer.
+ *
+ * Return a checksum based on the EEPROM configuration read.
+ */
+STATIC ushort __init
+AdvGet38C0800EEPConfig(AdvPortAddr iop_base,
+ ADVEEP_38C0800_CONFIG *cfg_buf)
+{
+ ushort wval, chksum;
+ ushort *wbuf;
+ int eep_addr;
+ ushort *charfields;
+
+ charfields = (ushort *) &ADVEEP_38C0800_Config_Field_IsChar;
+ wbuf = (ushort *) cfg_buf;
+ chksum = 0;
+
+ for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
+ eep_addr < ADV_EEP_DVC_CFG_END;
+ eep_addr++, wbuf++)
+ {
+ wval = AdvReadEEPWord(iop_base, eep_addr);
+ chksum += wval; /* Checksum is calculated from word values. */
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(wval);
+ } else {
+ *wbuf = wval;
+ }
+ }
+ /* Read checksum word. */
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ wbuf++; charfields++;
+
+ /* Read rest of EEPROM not covered by the checksum. */
+ for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
+ eep_addr < ADV_EEP_MAX_WORD_ADDR;
+ eep_addr++, wbuf++)
+ {
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(*wbuf);
+ }
+ }
+ return chksum;
+}
+
+/*
+ * Read EEPROM configuration into the specified buffer.
+ *
+ * Return a checksum based on the EEPROM configuration read.
+ */
+STATIC ushort __init
+AdvGet38C1600EEPConfig(AdvPortAddr iop_base,
+ ADVEEP_38C1600_CONFIG *cfg_buf)
+{
+ ushort wval, chksum;
+ ushort *wbuf;
+ int eep_addr;
+ ushort *charfields;
+
+ charfields = (ushort*) &ADVEEP_38C1600_Config_Field_IsChar;
+ wbuf = (ushort *) cfg_buf;
+ chksum = 0;
+
+ for (eep_addr = ADV_EEP_DVC_CFG_BEGIN;
+ eep_addr < ADV_EEP_DVC_CFG_END;
+ eep_addr++, wbuf++)
+ {
+ wval = AdvReadEEPWord(iop_base, eep_addr);
+ chksum += wval; /* Checksum is calculated from word values. */
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(wval);
+ } else {
+ *wbuf = wval;
+ }
+ }
+ /* Read checksum word. */
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ wbuf++; charfields++;
+
+ /* Read rest of EEPROM not covered by the checksum. */
+ for (eep_addr = ADV_EEP_DVC_CTL_BEGIN;
+ eep_addr < ADV_EEP_MAX_WORD_ADDR;
+ eep_addr++, wbuf++)
+ {
+ *wbuf = AdvReadEEPWord(iop_base, eep_addr);
+ if (*charfields++) {
+ *wbuf = le16_to_cpu(*wbuf);
+ }
+ }
+ return chksum;
+}
+
+/*
+ * Read the EEPROM from specified location
+ */
+STATIC ushort __init
+AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr)
+{
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD,
+ ASC_EEP_CMD_READ | eep_word_addr);
+ AdvWaitEEPCmd(iop_base);
+ return AdvReadWordRegister(iop_base, IOPW_EE_DATA);
+}
+
+/*
+ * Wait for EEPROM command to complete
+ */
+STATIC void __init
+AdvWaitEEPCmd(AdvPortAddr iop_base)
+{
+ int eep_delay_ms;
+
+ for (eep_delay_ms = 0; eep_delay_ms < ADV_EEP_DELAY_MS; eep_delay_ms++)
+ {
+ if (AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE)
+ {
+ break;
+ }
+ DvcSleepMilliSecond(1);
+ }
+ if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE) == 0)
+ {
+ ASC_ASSERT(0);
+ }
+ return;
+}
+
+/*
+ * Write the EEPROM from 'cfg_buf'.
+ */
+void
+AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
+{
+ ushort *wbuf;
+ ushort addr, chksum;
+ ushort *charfields;
+
+ wbuf = (ushort *) cfg_buf;
+ charfields = (ushort *) &ADVEEP_3550_Config_Field_IsChar;
+ chksum = 0;
+
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
+ AdvWaitEEPCmd(iop_base);
+
+ /*
+ * Write EEPROM from word 0 to word 20.
+ */
+ for (addr = ADV_EEP_DVC_CFG_BEGIN;
+ addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ chksum += *wbuf; /* Checksum is calculated from word values. */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ DvcSleepMilliSecond(ADV_EEP_DELAY_MS);
+ }
+
+ /*
+ * Write EEPROM checksum at word 21.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ wbuf++; charfields++;
+
+ /*
+ * Write EEPROM OEM name at words 22 to 29.
+ */
+ for (addr = ADV_EEP_DVC_CTL_BEGIN;
+ addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
+ AdvWaitEEPCmd(iop_base);
+ return;
+}
+
+/*
+ * Write the EEPROM from 'cfg_buf'.
+ */
+void
+AdvSet38C0800EEPConfig(AdvPortAddr iop_base,
+ ADVEEP_38C0800_CONFIG *cfg_buf)
+{
+ ushort *wbuf;
+ ushort *charfields;
+ ushort addr, chksum;
+
+ wbuf = (ushort *) cfg_buf;
+ charfields = (ushort *) &ADVEEP_38C0800_Config_Field_IsChar;
+ chksum = 0;
+
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
+ AdvWaitEEPCmd(iop_base);
+
+ /*
+ * Write EEPROM from word 0 to word 20.
+ */
+ for (addr = ADV_EEP_DVC_CFG_BEGIN;
+ addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ chksum += *wbuf; /* Checksum is calculated from word values. */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ DvcSleepMilliSecond(ADV_EEP_DELAY_MS);
+ }
+
+ /*
+ * Write EEPROM checksum at word 21.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ wbuf++; charfields++;
+
+ /*
+ * Write EEPROM OEM name at words 22 to 29.
+ */
+ for (addr = ADV_EEP_DVC_CTL_BEGIN;
+ addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
+ AdvWaitEEPCmd(iop_base);
+ return;
+}
+
+/*
+ * Write the EEPROM from 'cfg_buf'.
+ */
+void
+AdvSet38C1600EEPConfig(AdvPortAddr iop_base,
+ ADVEEP_38C1600_CONFIG *cfg_buf)
+{
+ ushort *wbuf;
+ ushort *charfields;
+ ushort addr, chksum;
+
+ wbuf = (ushort *) cfg_buf;
+ charfields = (ushort *) &ADVEEP_38C1600_Config_Field_IsChar;
+ chksum = 0;
+
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
+ AdvWaitEEPCmd(iop_base);
+
+ /*
+ * Write EEPROM from word 0 to word 20.
+ */
+ for (addr = ADV_EEP_DVC_CFG_BEGIN;
+ addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ chksum += *wbuf; /* Checksum is calculated from word values. */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ DvcSleepMilliSecond(ADV_EEP_DELAY_MS);
+ }
+
+ /*
+ * Write EEPROM checksum at word 21.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ wbuf++; charfields++;
+
+ /*
+ * Write EEPROM OEM name at words 22 to 29.
+ */
+ for (addr = ADV_EEP_DVC_CTL_BEGIN;
+ addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++)
+ {
+ ushort word;
+
+ if (*charfields++) {
+ word = cpu_to_le16(*wbuf);
+ } else {
+ word = *wbuf;
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word);
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr);
+ AdvWaitEEPCmd(iop_base);
+ }
+ AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE);
+ AdvWaitEEPCmd(iop_base);
+ return;
+}
+
+/* a_advlib.c */
+/*
+ * AdvExeScsiQueue() - Send a request to the RISC microcode program.
+ *
+ * Allocate a carrier structure, point the carrier to the ADV_SCSI_REQ_Q,
+ * add the carrier to the ICQ (Initiator Command Queue), and tickle the
+ * RISC to notify it a new command is ready to be executed.
+ *
+ * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be
+ * set to SCSI_MAX_RETRY.
+ *
+ * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the microcode
+ * for DMA addresses or math operations are byte swapped to little-endian
+ * order.
+ *
+ * Return:
+ * ADV_SUCCESS(1) - The request was successfully queued.
+ * ADV_BUSY(0) - Resource unavailable; Retry again after pending
+ * request completes.
+ * ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure
+ * host IC error.
+ */
+STATIC int
+AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc,
+ ADV_SCSI_REQ_Q *scsiq)
+{
+ ulong last_int_level;
+ AdvPortAddr iop_base;
+ ADV_DCNT req_size;
+ ADV_PADDR req_paddr;
+ ADV_CARR_T *new_carrp;
+
+ ASC_ASSERT(scsiq != NULL); /* 'scsiq' should never be NULL. */
+
+ /*
+ * The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID.
+ */
+ if (scsiq->target_id > ADV_MAX_TID)
+ {
+ scsiq->host_status = QHSTA_M_INVALID_DEVICE;
+ scsiq->done_status = QD_WITH_ERROR;
+ return ADV_ERROR;
+ }
+
+ iop_base = asc_dvc->iop_base;
+
+ last_int_level = DvcEnterCritical();
+
+ /*
+ * Allocate a carrier ensuring at least one carrier always
+ * remains on the freelist and initialize fields.
+ */
+ if ((new_carrp = asc_dvc->carr_freelist) == NULL)
+ {
+ DvcLeaveCritical(last_int_level);
+ return ADV_BUSY;
+ }
+ asc_dvc->carr_freelist = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(le32_to_cpu(new_carrp->next_vpa));
+ asc_dvc->carr_pending_cnt++;
+
+ /*
+ * Set the carrier to be a stopper by setting 'next_vpa'
+ * to the stopper value. The current stopper will be changed
+ * below to point to the new stopper.
+ */
+ new_carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ /*
+ * Clear the ADV_SCSI_REQ_Q done flag.
+ */
+ scsiq->a_flag &= ~ADV_SCSIQ_DONE;
+
+ req_size = sizeof(ADV_SCSI_REQ_Q);
+ req_paddr = DvcGetPhyAddr(asc_dvc, scsiq, (uchar *) scsiq,
+ (ADV_SDCNT *) &req_size, ADV_IS_SCSIQ_FLAG);
+
+ ASC_ASSERT(ADV_32BALIGN(req_paddr) == req_paddr);
+ ASC_ASSERT(req_size >= sizeof(ADV_SCSI_REQ_Q));
+
+ /* Wait for assertion before making little-endian */
+ req_paddr = cpu_to_le32(req_paddr);
+
+ /* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */
+ scsiq->scsiq_ptr = cpu_to_le32(ADV_VADDR_TO_U32(scsiq));
+ scsiq->scsiq_rptr = req_paddr;
+
+ scsiq->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->icq_sp));
+ /*
+ * Every ADV_CARR_T.carr_pa is byte swapped to little-endian
+ * order during initialization.
+ */
+ scsiq->carr_pa = asc_dvc->icq_sp->carr_pa;
+
+ /*
+ * Use the current stopper to send the ADV_SCSI_REQ_Q command to
+ * the microcode. The newly allocated stopper will become the new
+ * stopper.
+ */
+ asc_dvc->icq_sp->areq_vpa = req_paddr;
+
+ /*
+ * Set the 'next_vpa' pointer for the old stopper to be the
+ * physical address of the new stopper. The RISC can only
+ * follow physical addresses.
+ */
+ asc_dvc->icq_sp->next_vpa = new_carrp->carr_pa;
+
+ /*
+ * Set the host adapter stopper pointer to point to the new carrier.
+ */
+ asc_dvc->icq_sp = new_carrp;
+
+ if (asc_dvc->chip_type == ADV_CHIP_ASC3550 ||
+ asc_dvc->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ /*
+ * Tickle the RISC to tell it to read its Command Queue Head pointer.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A);
+ if (asc_dvc->chip_type == ADV_CHIP_ASC3550)
+ {
+ /*
+ * Clear the tickle value. In the ASC-3550 the RISC flag
+ * command 'clr_tickle_a' does not work unless the host
+ * value is cleared.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP);
+ }
+ } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ /*
+ * Notify the RISC a carrier is ready by writing the physical
+ * address of the new carrier stopper to the COMMA register.
+ */
+ AdvWriteDWordRegister(iop_base, IOPDW_COMMA,
+ le32_to_cpu(new_carrp->carr_pa));
+ }
+
+ DvcLeaveCritical(last_int_level);
+
+ return ADV_SUCCESS;
+}
+
+/*
+ * Reset SCSI Bus and purge all outstanding requests.
+ *
+ * Return Value:
+ * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset.
+ * ADV_FALSE(0) - Microcode command failed.
+ * ADV_ERROR(-1) - Microcode command timed-out. Microcode or IC
+ * may be hung which requires driver recovery.
+ */
+STATIC int
+AdvResetSB(ADV_DVC_VAR *asc_dvc)
+{
+ int status;
+
+ /*
+ * Send the SCSI Bus Reset idle start idle command which asserts
+ * the SCSI Bus Reset signal.
+ */
+ status = AdvSendIdleCmd(asc_dvc, (ushort) IDLE_CMD_SCSI_RESET_START, 0L);
+ if (status != ADV_TRUE)
+ {
+ return status;
+ }
+
+ /*
+ * Delay for the specified SCSI Bus Reset hold time.
+ *
+ * The hold time delay is done on the host because the RISC has no
+ * microsecond accurate timer.
+ */
+ DvcDelayMicroSecond(asc_dvc, (ushort) ASC_SCSI_RESET_HOLD_TIME_US);
+
+ /*
+ * Send the SCSI Bus Reset end idle command which de-asserts
+ * the SCSI Bus Reset signal and purges any pending requests.
+ */
+ status = AdvSendIdleCmd(asc_dvc, (ushort) IDLE_CMD_SCSI_RESET_END, 0L);
+ if (status != ADV_TRUE)
+ {
+ return status;
+ }
+
+ DvcSleepMilliSecond((ADV_DCNT) asc_dvc->scsi_reset_wait * 1000);
+
+ return status;
+}
+
+/*
+ * Reset chip and SCSI Bus.
+ *
+ * Return Value:
+ * ADV_TRUE(1) - Chip re-initialization and SCSI Bus Reset successful.
+ * ADV_FALSE(0) - Chip re-initialization and SCSI Bus Reset failure.
+ */
+STATIC int
+AdvResetChipAndSB(ADV_DVC_VAR *asc_dvc)
+{
+ int status;
+ ushort wdtr_able, sdtr_able, tagqng_able;
+ ushort ppr_able = 0;
+ uchar tid, max_cmd[ADV_MAX_TID + 1];
+ AdvPortAddr iop_base;
+ ushort bios_sig;
+
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * Save current per TID negotiated values.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
+ }
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+
+ /*
+ * Force the AdvInitAsc3550/38C0800Driver() function to
+ * perform a SCSI Bus Reset by clearing the BIOS signature word.
+ * The initialization functions assumes a SCSI Bus Reset is not
+ * needed if the BIOS signature word is present.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig);
+ AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, 0);
+
+ /*
+ * Stop chip and reset it.
+ */
+ AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_STOP);
+ AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET);
+ DvcSleepMilliSecond(100);
+ AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_WR_IO_REG);
+
+ /*
+ * Reset Adv Library error code, if any, and try
+ * re-initializing the chip.
+ */
+ asc_dvc->err_code = 0;
+ if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ status = AdvInitAsc38C1600Driver(asc_dvc);
+ }
+ else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ status = AdvInitAsc38C0800Driver(asc_dvc);
+ } else
+ {
+ status = AdvInitAsc3550Driver(asc_dvc);
+ }
+
+ /* Translate initialization return value to status value. */
+ if (status == 0)
+ {
+ status = ADV_TRUE;
+ } else
+ {
+ status = ADV_FALSE;
+ }
+
+ /*
+ * Restore the BIOS signature word.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig);
+
+ /*
+ * Restore per TID negotiated values.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
+ if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600)
+ {
+ AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able);
+ }
+ AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
+ for (tid = 0; tid <= ADV_MAX_TID; tid++)
+ {
+ AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ max_cmd[tid]);
+ }
+
+ return status;
+}
+
+/*
+ * Adv Library Interrupt Service Routine
+ *
+ * This function is called by a driver's interrupt service routine.
+ * The function disables and re-enables interrupts.
+ *
+ * When a microcode idle command is completed, the ADV_DVC_VAR
+ * 'idle_cmd_done' field is set to ADV_TRUE.
+ *
+ * Note: AdvISR() can be called when interrupts are disabled or even
+ * when there is no hardware interrupt condition present. It will
+ * always check for completed idle commands and microcode requests.
+ * This is an important feature that shouldn't be changed because it
+ * allows commands to be completed from polling mode loops.
+ *
+ * Return:
+ * ADV_TRUE(1) - interrupt was pending
+ * ADV_FALSE(0) - no interrupt was pending
+ */
+STATIC int
+AdvISR(ADV_DVC_VAR *asc_dvc)
+{
+ AdvPortAddr iop_base;
+ uchar int_stat;
+ ushort target_bit;
+ ADV_CARR_T *free_carrp;
+ ADV_VADDR irq_next_vpa;
+ int flags;
+ ADV_SCSI_REQ_Q *scsiq;
+
+ flags = DvcEnterCritical();
+
+ iop_base = asc_dvc->iop_base;
+
+ /* Reading the register clears the interrupt. */
+ int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG);
+
+ if ((int_stat & (ADV_INTR_STATUS_INTRA | ADV_INTR_STATUS_INTRB |
+ ADV_INTR_STATUS_INTRC)) == 0)
+ {
+ DvcLeaveCritical(flags);
+ return ADV_FALSE;
+ }
+
+ /*
+ * Notify the driver of an asynchronous microcode condition by
+ * calling the ADV_DVC_VAR.async_callback function. The function
+ * is passed the microcode ASC_MC_INTRB_CODE byte value.
+ */
+ if (int_stat & ADV_INTR_STATUS_INTRB)
+ {
+ uchar intrb_code;
+
+ AdvReadByteLram(iop_base, ASC_MC_INTRB_CODE, intrb_code);
+
+ if (asc_dvc->chip_type == ADV_CHIP_ASC3550 ||
+ asc_dvc->chip_type == ADV_CHIP_ASC38C0800)
+ {
+ if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE &&
+ asc_dvc->carr_pending_cnt != 0)
+ {
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A);
+ if (asc_dvc->chip_type == ADV_CHIP_ASC3550)
+ {
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP);
+ }
+ }
+ }
+
+ if (asc_dvc->async_callback != 0)
+ {
+ (*asc_dvc->async_callback)(asc_dvc, intrb_code);
+ }
+ }
+
+ /*
+ * Check if the IRQ stopper carrier contains a completed request.
+ */
+ while (((irq_next_vpa =
+ le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ASC_RQ_DONE) != 0)
+ {
+ /*
+ * Get a pointer to the newly completed ADV_SCSI_REQ_Q structure.
+ * The RISC will have set 'areq_vpa' to a virtual address.
+ *
+ * The firmware will have copied the ASC_SCSI_REQ_Q.scsiq_ptr
+ * field to the carrier ADV_CARR_T.areq_vpa field. The conversion
+ * below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr'
+ * in AdvExeScsiQueue().
+ */
+ scsiq = (ADV_SCSI_REQ_Q *)
+ ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->areq_vpa));
+
+ /*
+ * Request finished with good status and the queue was not
+ * DMAed to host memory by the firmware. Set all status fields
+ * to indicate good status.
+ */
+ if ((irq_next_vpa & ASC_RQ_GOOD) != 0)
+ {
+ scsiq->done_status = QD_NO_ERROR;
+ scsiq->host_status = scsiq->scsi_status = 0;
+ scsiq->data_cnt = 0L;
+ }
+
+ /*
+ * Advance the stopper pointer to the next carrier
+ * ignoring the lower four bits. Free the previous
+ * stopper carrier.
+ */
+ free_carrp = asc_dvc->irq_sp;
+ asc_dvc->irq_sp = (ADV_CARR_T *)
+ ADV_U32_TO_VADDR(ASC_GET_CARRP(irq_next_vpa));
+
+ free_carrp->next_vpa =
+ cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
+ asc_dvc->carr_freelist = free_carrp;
+ asc_dvc->carr_pending_cnt--;
+
+ ASC_ASSERT(scsiq != NULL);
+ target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id);
+
+ /*
+ * Clear request microcode control flag.
+ */
+ scsiq->cntl = 0;
+
+ /*
+ * If the command that completed was a SCSI INQUIRY and
+ * LUN 0 was sent the command, then process the INQUIRY
+ * command information for the device.
+ *
+ * Note: If data returned were either VPD or CmdDt data,
+ * don't process the INQUIRY command information for
+ * the device, otherwise may erroneously set *_able bits.
+ */
+ if (scsiq->done_status == QD_NO_ERROR &&
+ scsiq->cdb[0] == INQUIRY &&
+ scsiq->target_lun == 0 &&
+ (scsiq->cdb[1] & ADV_INQ_RTN_VPD_AND_CMDDT)
+ == ADV_INQ_RTN_STD_INQUIRY_DATA)
+ {
+ AdvInquiryHandling(asc_dvc, scsiq);
+ }
+
+ /*
+ * Notify the driver of the completed request by passing
+ * the ADV_SCSI_REQ_Q pointer to its callback function.
+ */
+ scsiq->a_flag |= ADV_SCSIQ_DONE;
+ (*asc_dvc->isr_callback)(asc_dvc, scsiq);
+ /*
+ * Note: After the driver callback function is called, 'scsiq'
+ * can no longer be referenced.
+ *
+ * Fall through and continue processing other completed
+ * requests...
+ */
+
+ /*
+ * Disable interrupts again in case the driver inadvertently
+ * enabled interrupts in its callback function.
+ *
+ * The DvcEnterCritical() return value is ignored, because
+ * the 'flags' saved when AdvISR() was first entered will be
+ * used to restore the interrupt flag on exit.
+ */
+ (void) DvcEnterCritical();
+ }
+ DvcLeaveCritical(flags);
+ return ADV_TRUE;
+}
+
+/*
+ * Send an idle command to the chip and wait for completion.
+ *
+ * Command completion is polled for once per microsecond.
+ *
+ * The function can be called from anywhere including an interrupt handler.
+ * But the function is not re-entrant, so it uses the DvcEnter/LeaveCritical()
+ * functions to prevent reentrancy.
+ *
+ * Return Values:
+ * ADV_TRUE - command completed successfully
+ * ADV_FALSE - command failed
+ * ADV_ERROR - command timed out
+ */
+STATIC int
+AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc,
+ ushort idle_cmd,
+ ADV_DCNT idle_cmd_parameter)
+{
+ ulong last_int_level;
+ int result;
+ ADV_DCNT i, j;
+ AdvPortAddr iop_base;
+
+ last_int_level = DvcEnterCritical();
+
+ iop_base = asc_dvc->iop_base;
+
+ /*
+ * Clear the idle command status which is set by the microcode
+ * to a non-zero value to indicate when the command is completed.
+ * The non-zero result is one of the IDLE_CMD_STATUS_* values
+ * defined in a_advlib.h.
+ */
+ AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort) 0);
+
+ /*
+ * Write the idle command value after the idle command parameter
+ * has been written to avoid a race condition. If the order is not
+ * followed, the microcode may process the idle command before the
+ * parameters have been written to LRAM.
+ */
+ AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IDLE_CMD_PARAMETER,
+ cpu_to_le32(idle_cmd_parameter));
+ AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd);
+
+ /*
+ * Tickle the RISC to tell it to process the idle command.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_B);
+ if (asc_dvc->chip_type == ADV_CHIP_ASC3550)
+ {
+ /*
+ * Clear the tickle value. In the ASC-3550 the RISC flag
+ * command 'clr_tickle_b' does not work unless the host
+ * value is cleared.
+ */
+ AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP);
+ }
+
+ /* Wait for up to 100 millisecond for the idle command to timeout. */
+ for (i = 0; i < SCSI_WAIT_100_MSEC; i++)
+ {
+ /* Poll once each microsecond for command completion. */
+ for (j = 0; j < SCSI_US_PER_MSEC; j++)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, result);
+ if (result != 0)
+ {
+ DvcLeaveCritical(last_int_level);
+ return result;
+ }
+ DvcDelayMicroSecond(asc_dvc, (ushort) 1);
+ }
+ }
+
+ ASC_ASSERT(0); /* The idle command should never timeout. */
+ DvcLeaveCritical(last_int_level);
+ return ADV_ERROR;
+}
+
+/*
+ * Inquiry Information Byte 7 Handling
+ *
+ * Handle SCSI Inquiry Command information for a device by setting
+ * microcode operating variables that affect WDTR, SDTR, and Tag
+ * Queuing.
+ */
+STATIC void
+AdvInquiryHandling(
+ ADV_DVC_VAR *asc_dvc,
+ ADV_SCSI_REQ_Q *scsiq)
+{
+ AdvPortAddr iop_base;
+ uchar tid;
+ ADV_SCSI_INQUIRY *inq;
+ ushort tidmask;
+ ushort cfg_word;
+
+ /*
+ * AdvInquiryHandling() requires up to INQUIRY information Byte 7
+ * to be available.
+ *
+ * If less than 8 bytes of INQUIRY information were requested or less
+ * than 8 bytes were transferred, then return. cdb[4] is the request
+ * length and the ADV_SCSI_REQ_Q 'data_cnt' field is set by the
+ * microcode to the transfer residual count.
+ */
+
+ if (scsiq->cdb[4] < 8 ||
+ (scsiq->cdb[4] - le32_to_cpu(scsiq->data_cnt)) < 8)
+ {
+ return;
+ }
+
+ iop_base = asc_dvc->iop_base;
+ tid = scsiq->target_id;
+
+ inq = (ADV_SCSI_INQUIRY *) scsiq->vdata_addr;
+
+ /*
+ * WDTR, SDTR, and Tag Queuing cannot be enabled for old devices.
+ */
+ if (ADV_INQ_RESPONSE_FMT(inq) < 2 && ADV_INQ_ANSI_VER(inq) < 2)
+ {
+ return;
+ } else
+ {
+ /*
+ * INQUIRY Byte 7 Handling
+ *
+ * Use a device's INQUIRY byte 7 to determine whether it
+ * supports WDTR, SDTR, and Tag Queuing. If the feature
+ * is enabled in the EEPROM and the device supports the
+ * feature, then enable it in the microcode.
+ */
+
+ tidmask = ADV_TID_TO_TIDMASK(tid);
+
+ /*
+ * Wide Transfers
+ *
+ * If the EEPROM enabled WDTR for the device and the device
+ * supports wide bus (16 bit) transfers, then turn on the
+ * device's 'wdtr_able' bit and write the new value to the
+ * microcode.
+ */
+ if ((asc_dvc->wdtr_able & tidmask) && ADV_INQ_WIDE16(inq))
+ {
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word);
+ if ((cfg_word & tidmask) == 0)
+ {
+ cfg_word |= tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word);
+
+ /*
+ * Clear the microcode "SDTR negotiation" and "WDTR
+ * negotiation" done indicators for the target to cause
+ * it to negotiate with the new setting set above.
+ * WDTR when accepted causes the target to enter
+ * asynchronous mode, so SDTR must be negotiated.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
+ cfg_word &= ~tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
+ AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word);
+ cfg_word &= ~tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word);
+ }
+ }
+
+ /*
+ * Synchronous Transfers
+ *
+ * If the EEPROM enabled SDTR for the device and the device
+ * supports synchronous transfers, then turn on the device's
+ * 'sdtr_able' bit. Write the new value to the microcode.
+ */
+ if ((asc_dvc->sdtr_able & tidmask) && ADV_INQ_SYNC(inq))
+ {
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word);
+ if ((cfg_word & tidmask) == 0)
+ {
+ cfg_word |= tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word);
+
+ /*
+ * Clear the microcode "SDTR negotiation" done indicator
+ * for the target to cause it to negotiate with the new
+ * setting set above.
+ */
+ AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
+ cfg_word &= ~tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word);
+ }
+ }
+ /*
+ * If the Inquiry data included enough space for the SPI-3
+ * Clocking field, then check if DT mode is supported.
+ */
+ if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600 &&
+ (scsiq->cdb[4] >= 57 ||
+ (scsiq->cdb[4] - le32_to_cpu(scsiq->data_cnt)) >= 57))
+ {
+ /*
+ * PPR (Parallel Protocol Request) Capable
+ *
+ * If the device supports DT mode, then it must be PPR capable.
+ * The PPR message will be used in place of the SDTR and WDTR
+ * messages to negotiate synchronous speed and offset, transfer
+ * width, and protocol options.
+ */
+ if (ADV_INQ_CLOCKING(inq) & ADV_INQ_CLOCKING_DT_ONLY)
+ {
+ AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, asc_dvc->ppr_able);
+ asc_dvc->ppr_able |= tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, asc_dvc->ppr_able);
+ }
+ }
+
+ /*
+ * If the EEPROM enabled Tag Queuing for the device and the
+ * device supports Tag Queueing, then turn on the device's
+ * 'tagqng_enable' bit in the microcode and set the microcode
+ * maximum command count to the ADV_DVC_VAR 'max_dvc_qng'
+ * value.
+ *
+ * Tag Queuing is disabled for the BIOS which runs in polled
+ * mode and would see no benefit from Tag Queuing. Also by
+ * disabling Tag Queuing in the BIOS devices with Tag Queuing
+ * bugs will at least work with the BIOS.
+ */
+ if ((asc_dvc->tagqng_able & tidmask) && ADV_INQ_CMD_QUEUE(inq))
+ {
+ AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word);
+ cfg_word |= tidmask;
+ AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word);
+
+ AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid,
+ asc_dvc->max_dvc_qng);
+ }
+ }
+}
+MODULE_LICENSE("Dual BSD/GPL");