diff options
Diffstat (limited to 'drivers/scsi/libata-core.c')
-rw-r--r-- | drivers/scsi/libata-core.c | 547 |
1 files changed, 485 insertions, 62 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7ed..36b401fee1f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_wait_idle(ap); } + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_exec_command - issue ATA command to host controller + * ata_exec_command_pio - issue ATA command to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Issues PIO/MMIO write to ATA command register, with proper + * Issues PIO write to ATA command register, with proper * synchronization with interrupt handler / other threads. * * LOCKING: @@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_pause(ap); } + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_tf_read - input device's ATA taskfile shadow registers + * ata_tf_read_pio - input device's ATA taskfile shadow registers * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * @@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) } } + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * and return it's value. This also clears pending interrupts + * and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * via MMIO and return it's value. This also clears pending interrupts + * via MMIO and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap) return readb((void __iomem *) ap->ioaddr.status_addr); } + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_check_status(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) @@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap) return ata_check_status_pio(ap); } + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_altstatus(struct ata_port *ap) { if (ap->ops->check_altstatus) @@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap) return inb(ap->ioaddr.altstatus_addr); } + +/** + * ata_chk_err - Read device error reg + * @ap: port where the device is + * + * Reads ATA taskfile error register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_err() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_chk_err(struct ata_port *ap) { if (ap->ops->check_err) @@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s, } } + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) { } + /** * ata_std_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * * Use the method defined in the ATA specification to * make either device 0, or device 1, active on the - * ATA channel. + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. * * LOCKING: * caller. @@ -1186,11 +1295,47 @@ err_out: DPRINTK("EXIT, err\n"); } + +static inline u8 ata_dev_knobble(struct ata_port *ap) +{ + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); +} + +/** + * ata_dev_config - Run device specific handlers and check for + * SATA->PATA bridges + * @ap: Bus + * @i: Device + * + * LOCKING: + */ + +void ata_dev_config(struct ata_port *ap, unsigned int i) +{ + /* limit bridge transfers to udma5, 200 sectors */ + if (ata_dev_knobble(ap)) { + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, ap->device->devno); + ap->udma_mask &= ATA_UDMA5; + ap->host->max_sectors = ATA_MAX_SECTORS; + ap->host->hostt->max_sectors = ATA_MAX_SECTORS; + ap->device->flags |= ATA_DFLAG_LOCK_SECTORS; + } + + if (ap->ops->dev_config) + ap->ops->dev_config(ap, &ap->device[i]); +} + /** * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, non-zero on error. @@ -1208,8 +1353,7 @@ static int ata_bus_probe(struct ata_port *ap) ata_dev_identify(ap, i); if (ata_dev_present(&ap->device[i])) { found = 1; - if (ap->ops->dev_config) - ap->ops->dev_config(ap, &ap->device[i]); + ata_dev_config(ap,i); } } @@ -1229,10 +1373,14 @@ err_out: } /** - * ata_port_probe - - * @ap: + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_probe(struct ata_port *ap) @@ -1241,10 +1389,15 @@ void ata_port_probe(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. + * + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. * * LOCKING: + * PCI/etc. bus probe sem. * */ void __sata_phy_reset(struct ata_port *ap) @@ -1253,11 +1406,11 @@ void __sata_phy_reset(struct ata_port *ap) unsigned long timeout = jiffies + (HZ * 5); if (ap->flags & ATA_FLAG_SATA_RESET) { - scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */ - scr_read(ap, SCR_STATUS); /* dummy read; flush */ + /* issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); udelay(400); /* FIXME: a guess */ } - scr_write(ap, SCR_CONTROL, 0x300); /* issue phy wake/clear reset */ + scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ /* wait for phy to become ready, if necessary */ do { @@ -1289,10 +1442,14 @@ void __sata_phy_reset(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. + * + * This function resets the SATA bus, and then probes + * the bus for devices. * * LOCKING: + * PCI/etc. bus probe sem. * */ void sata_phy_reset(struct ata_port *ap) @@ -1304,10 +1461,16 @@ void sata_phy_reset(struct ata_port *ap) } /** - * ata_port_disable - - * @ap: + * ata_port_disable - Disable port. + * @ap: Port to be disabled. * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_disable(struct ata_port *ap) @@ -1416,7 +1579,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * * LOCKING: + * PCI/etc. bus probe sem. * */ static void ata_set_mode(struct ata_port *ap) @@ -1467,7 +1633,10 @@ err_out: * @tmout_pat: impatience timeout * @tmout: overall timeout * - * LOCKING: + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. * */ @@ -1553,10 +1722,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) } /** - * ata_bus_edd - - * @ap: + * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. + * @ap: Port to reset and probe + * + * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and + * probe the bus. Not often used these days. * * LOCKING: + * PCI/etc. bus probe sem. * */ @@ -1633,8 +1806,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the device is ATA or ATAPI. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * PCI/etc. bus probe sem. + * Obtains host_set lock. * * SIDE EFFECTS: * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. @@ -1876,7 +2049,11 @@ static int fgb(u32 bitmap) * @xfer_mode_out: (output) SET FEATURES - XFER MODE code * @xfer_shift_out: (output) bit shift that selects this mode * + * Based on host and device capabilities, determine the + * maximum transfer mode that is amenable to all. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, negative on error. @@ -1909,7 +2086,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * @ap: Port associated with device @dev * @dev: Device to which command will be sent * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * * LOCKING: + * PCI/etc. bus probe sem. */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1947,10 +2128,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_sg_clean - - * @qc: + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. * * LOCKING: + * spin_lock_irqsave(host_set lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -1981,7 +2165,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -2028,7 +2216,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) + * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ @@ -2046,6 +2240,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * + * Prepare ATA taskfile for submission. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -2057,6 +2253,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + + +/** + * ata_sg_init_one - Prepare a one-entry scatter-gather list. + * @qc: Queued command + * @buf: transfer buffer + * @buflen: length of buf + * + * Builds a single-entry scatter-gather list to initiate a + * transfer utilizing the specified buffer. + * + * LOCKING: + */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2071,9 +2293,35 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) sg = qc->sg; sg->page = virt_to_page(buf); sg->offset = (unsigned long) buf & ~PAGE_MASK; - sg_dma_len(sg) = buflen; + sg->length = buflen; } +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + +/** + * ata_sg_init - Assign a scatter gather list to a queued command + * @qc: Queued command + * @sg: Scatter-gather list + * @n_elem: length of sg list + * + * Attaches a scatter-gather list to a queued command. + * + * LOCKING: + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2083,14 +2331,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } /** - * ata_sg_setup_one - - * @qc: + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: - * + * Zero on success, negative on error. */ static int ata_sg_setup_one(struct ata_queued_cmd *qc) @@ -2101,11 +2351,12 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) dma_addr_t dma_address; dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt, - sg_dma_len(sg), dir); + sg->length, dir); if (dma_mapping_error(dma_address)) return -1; sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); @@ -2114,13 +2365,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } /** - * ata_sg_setup - - * @qc: + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: + * Zero on success, negative on error. * */ @@ -2150,6 +2404,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * @ap: * * LOCKING: + * None. (executing in kernel thread context) * * RETURNS: * @@ -2197,6 +2452,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_complete (struct ata_port *ap) @@ -2239,6 +2495,18 @@ static void ata_pio_complete (struct ata_port *ap) ata_qc_complete(qc, drv_stat); } + +/** + * swap_buf_le16 - + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { #ifdef __BIG_ENDIAN @@ -2310,7 +2578,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursect++; qc->cursg_ofs++; - if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) { + if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2339,7 +2607,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) next_sg: sg = &qc->sg[qc->cursg]; -next_page: page = sg->page; offset = sg->offset + qc->cursg_ofs; @@ -2347,7 +2614,8 @@ next_page: page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes); + /* don't overrun current sg */ + count = min(sg->length - qc->cursg_ofs, bytes); /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); @@ -2358,7 +2626,7 @@ next_page: qc->curbytes += count; qc->cursg_ofs += count; - if (qc->cursg_ofs == sg_dma_len(sg)) { + if (qc->cursg_ofs == sg->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2371,8 +2639,6 @@ next_page: kunmap(page); if (bytes) { - if (qc->cursg_ofs < sg_dma_len(sg)) - goto next_page; goto next_sg; } } @@ -2414,6 +2680,7 @@ err_out: * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_block(struct ata_port *ap) @@ -2539,7 +2806,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; - memset(&qc->cdb, 0, sizeof(ap->cdb_len)); + memset(&qc->cdb, 0, ap->cdb_len); qc->cdb[0] = REQUEST_SENSE; qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; @@ -2582,6 +2849,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, * transaction completed successfully. * * LOCKING: + * Inherited from SCSI layer (none, can sleep) */ static void ata_qc_timeout(struct ata_queued_cmd *qc) @@ -2691,6 +2959,7 @@ out: * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) @@ -2716,6 +2985,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, @@ -2780,6 +3050,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * in case something prevents using it. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ void ata_qc_free(struct ata_queued_cmd *qc) @@ -2793,9 +3064,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @drv_stat: ATA status register contents + * @drv_stat: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ @@ -2811,6 +3086,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); + qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately @@ -2890,6 +3166,7 @@ err_out: return -1; } + /** * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner * @qc: command to issue to device @@ -2899,6 +3176,8 @@ err_out: * classes called "protocols", and issuing each type of protocol * is slightly different. * + * May be used as the qc_issue() entry in ata_port_operations. + * * LOCKING: * spin_lock_irqsave(host_set lock) * @@ -2956,7 +3235,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) } /** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3063,6 +3342,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_start(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3071,6 +3362,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) ata_bmdma_start_pio(qc); } + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3079,6 +3384,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) ata_bmdma_setup_pio(qc); } + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_irq_clear(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3091,6 +3409,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap) } + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + u8 ata_bmdma_status(struct ata_port *ap) { u8 host_stat; @@ -3102,6 +3433,19 @@ u8 ata_bmdma_status(struct ata_port *ap) return host_stat; } + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @ap: Port associated with this ATA transaction. + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_stop(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3201,13 +3545,18 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line - * @dev_instance: pointer to our host information structure + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure * @regs: unused * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * * LOCKING: + * Obtains host_set lock during operation. * * RETURNS: + * IRQ_NONE or IRQ_HANDLED. * */ @@ -3229,7 +3578,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } } @@ -3299,6 +3649,19 @@ err_out: ata_qc_complete(qc, ATA_ERR); } + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3312,6 +3675,18 @@ int ata_port_start (struct ata_port *ap) return 0; } + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + */ + void ata_port_stop (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3319,6 +3694,13 @@ void ata_port_stop (struct ata_port *ap) dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); } +void ata_host_stop (struct ata_host_set *host_set) +{ + if (host_set->mmio_base) + iounmap(host_set->mmio_base); +} + + /** * ata_host_remove - Unregister SCSI host structure with upper layers * @ap: Port to unregister @@ -3347,7 +3729,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * * LOCKING: + * Inherited from caller. * */ @@ -3402,9 +3788,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host * + * Attach low-level ATA driver to system. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * New ata_port on success, for NULL on error. * */ @@ -3437,12 +3827,22 @@ err_out: } /** - * ata_device_add - - * @ent: + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * Number of ports registered. Zero on error (no ports registered). * */ @@ -3594,7 +3994,15 @@ int ata_scsi_release(struct Scsi_Host *host) /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. */ + void ata_std_ports(struct ata_ioports *ioaddr) { ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; @@ -3636,6 +4044,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) return probe_ent; } + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + */ + #ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) @@ -3717,10 +4139,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * @port_info: Information from low-level host driver * @n_ports: Number of ports attached to host controller * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * * LOCKING: * Inherited from PCI layer (may sleep). * * RETURNS: + * Zero on success, negative on errno-based value on error. * */ @@ -3875,10 +4306,6 @@ void ata_pci_remove_one (struct pci_dev *pdev) } free_irq(host_set->irq, host_set); - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - if (host_set->mmio_base) - iounmap(host_set->mmio_base); for (i = 0; i < host_set->n_ports; i++) { ap = host_set->ports[i]; @@ -3897,6 +4324,9 @@ void ata_pci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } + if (host_set->ops->host_stop) + host_set->ops->host_stop(host_set); + kfree(host_set); pci_release_regions(pdev); @@ -3940,15 +4370,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) #endif /* CONFIG_PCI */ -/** - * ata_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init ata_init(void) { ata_wq = create_workqueue("ata"); @@ -3994,6 +4415,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); @@ -4014,6 +4436,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_id_string); +EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); #ifdef CONFIG_PCI |