diff options
Diffstat (limited to 'drivers/scsi/libata-scsi.c')
| -rw-r--r-- | drivers/scsi/libata-scsi.c | 140 |
1 files changed, 87 insertions, 53 deletions
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ccedb453697..dd954a23b35 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -511,13 +511,11 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", id, drv_stat); - /* For our last chance pick, use medium read error because - * it's much more common than an ATA drive telling you a write - * has failed. - */ - *sk = MEDIUM_ERROR; - *asc = 0x11; /* "unrecovered read error" */ - *ascq = 0x04; /* "auto-reallocation failed" */ + /* We need a sensible error return here, which is tricky, and one + that won't cause people to do things like return a disk wrongly */ + *sk = ABORTED_COMMAND; + *asc = 0x00; + *ascq = 0x00; translate_done: printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " @@ -662,6 +660,41 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) } } +static void ata_scsi_sdev_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; +} + +static void ata_scsi_dev_config(struct scsi_device *sdev, + struct ata_device *dev) +{ + unsigned int max_sectors; + + /* TODO: 2048 is an arbitrary number, not the + * hardware maximum. This should be increased to + * 65534 when Jens Axboe's patch for dynamically + * determining max_sectors is merged. + */ + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = 2048; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); + + /* + * SATA DMA transfers must be multiples of 4 byte, so + * we need to pad ATAPI transfers using an extra sg. + * Decrement max hw segments accordingly. + */ + if (dev->class == ATA_DEV_ATAPI) { + request_queue_t *q = sdev->request_queue; + blk_queue_max_hw_segments(q, q->max_hw_segments - 1); + } +} + /** * ata_scsi_slave_config - Set SCSI device attributes * @sdev: SCSI device to examine @@ -676,41 +709,18 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) int ata_scsi_slave_config(struct scsi_device *sdev) { - sdev->use_10_for_rw = 1; - sdev->use_10_for_ms = 1; + ata_scsi_sdev_config(sdev); blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); if (sdev->id < ATA_MAX_DEVICES) { struct ata_port *ap; struct ata_device *dev; - unsigned int max_sectors; ap = (struct ata_port *) &sdev->host->hostdata[0]; dev = &ap->device[sdev->id]; - /* TODO: 2048 is an arbitrary number, not the - * hardware maximum. This should be increased to - * 65534 when Jens Axboe's patch for dynamically - * determining max_sectors is merged. - */ - max_sectors = ATA_MAX_SECTORS; - if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = 2048; - if (dev->max_sectors) - max_sectors = dev->max_sectors; - - blk_queue_max_sectors(sdev->request_queue, max_sectors); - - /* - * SATA DMA transfers must be multiples of 4 byte, so - * we need to pad ATAPI transfers using an extra sg. - * Decrement max hw segments accordingly. - */ - if (dev->class == ATA_DEV_ATAPI) { - request_queue_t *q = sdev->request_queue; - blk_queue_max_hw_segments(q, q->max_hw_segments - 1); - } + ata_scsi_dev_config(sdev, dev); } return 0; /* scsi layer doesn't check return value, sigh */ @@ -1542,7 +1552,7 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, * @buflen: Response buffer length. * * Returns standard device identification data associated - * with non-EVPD INQUIRY command output. + * with non-VPD INQUIRY command output. * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1593,12 +1603,12 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages + * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * - * Returns list of inquiry EVPD pages available. + * Returns list of inquiry VPD pages available. * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1612,7 +1622,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, 0x80, /* page 0x80, unit serial no page */ 0x83 /* page 0x83, device ident page */ }; - rbuf[3] = sizeof(pages); /* number of supported EVPD pages */ + rbuf[3] = sizeof(pages); /* number of supported VPD pages */ if (buflen > 6) memcpy(rbuf + 4, pages, sizeof(pages)); @@ -1621,7 +1631,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number + * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. @@ -1650,16 +1660,16 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, return 0; } -static const char * const inq_83_str = "Linux ATA-SCSI simulator"; - /** - * ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity + * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * - * Returns device identification. Currently hardcoded to - * return "Linux ATA-SCSI simulator". + * Yields two logical unit device identification designators: + * - vendor specific ASCII containing the ATA serial number + * - SAT defined "t10 vendor id based" containing ASCII vendor + * name ("ATA "), model and serial numbers. * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1668,16 +1678,39 @@ static const char * const inq_83_str = "Linux ATA-SCSI simulator"; unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { - rbuf[1] = 0x83; /* this page code */ - rbuf[3] = 4 + strlen(inq_83_str); /* page len */ + int num; + const int sat_model_serial_desc_len = 68; + const int ata_model_byte_len = 40; - /* our one and only identification descriptor (vendor-specific) */ - if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) { - rbuf[4 + 0] = 2; /* code set: ASCII */ - rbuf[4 + 3] = strlen(inq_83_str); - memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str)); + rbuf[1] = 0x83; /* this page code */ + num = 4; + + if (buflen > (ATA_SERNO_LEN + num + 3)) { + /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ + rbuf[num + 0] = 2; + rbuf[num + 3] = ATA_SERNO_LEN; + num += 4; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; } - + if (buflen > (sat_model_serial_desc_len + num + 3)) { + /* SAT defined lu model and serial numbers descriptor */ + /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ + rbuf[num + 0] = 2; + rbuf[num + 1] = 1; + rbuf[num + 3] = sat_model_serial_desc_len; + num += 4; + memcpy(rbuf + num, "ATA ", 8); + num += 8; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_PROD_OFS, ata_model_byte_len); + num += ata_model_byte_len; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; + } + rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ return 0; } @@ -2356,9 +2389,6 @@ ata_scsi_map_proto(u8 byte1) case 4: /* PIO Data-in */ case 5: /* PIO Data-out */ - if (byte1 & 0xe0) { - return ATA_PROT_PIO_MULT; - } return ATA_PROT_PIO; case 10: /* Device Reset */ @@ -2397,6 +2427,10 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + if (scsicmd[1] & 0xe0) + /* PIO multi not supported yet */ + goto invalid_fld; + /* * 12 and 16 byte CDBs use different offsets to * provide the various register values. |