aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid/megaraid_sas.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
-rw-r--r--drivers/scsi/megaraid/megaraid_sas.c98
1 files changed, 97 insertions, 1 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 0b738243782..7de267e1445 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -60,6 +60,12 @@ static struct pci_device_id megasas_pci_table[] = {
PCI_ANY_ID,
},
{
+ PCI_VENDOR_ID_LSI_LOGIC,
+ PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ },
+ {
PCI_VENDOR_ID_DELL,
PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
PCI_ANY_ID,
@@ -199,6 +205,86 @@ static struct megasas_instance_template megasas_instance_template_xscale = {
*/
/**
+* The following functions are defined for ppc (deviceid : 0x60)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_ppc - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ writel(~0x80000004, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_ppc - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_ppc - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(&regs->outbound_intr_status);
+
+ if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, &regs->outbound_doorbell_clear);
+
+ return 0;
+}
+/**
+ * megasas_fire_cmd_ppc - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count, struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_ppc = {
+
+ .fire_cmd = megasas_fire_cmd_ppc,
+ .enable_intr = megasas_enable_intr_ppc,
+ .clear_intr = megasas_clear_intr_ppc,
+ .read_fw_status_reg = megasas_read_fw_status_reg_ppc,
+};
+
+/**
+* This is the end of set of functions & definitions
+* specific to ppc (deviceid : 0x60) controllers
+*/
+
+/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
*/
@@ -1607,7 +1693,17 @@ static int megasas_init_mfi(struct megasas_instance *instance)
reg_set = instance->reg_set;
- instance->instancet = &megasas_instance_template_xscale;
+ switch(instance->pdev->device)
+ {
+ case PCI_DEVICE_ID_LSI_SAS1078R:
+ instance->instancet = &megasas_instance_template_ppc;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1064R:
+ case PCI_DEVICE_ID_DELL_PERC5:
+ default:
+ instance->instancet = &megasas_instance_template_xscale;
+ break;
+ }
/*
* We expect the FW state to be READY