aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_os.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c78
1 files changed, 39 insertions, 39 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 072906994bf..fd7e730bb3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -64,7 +64,7 @@ MODULE_PARM_DESC(ql2xplogiabsentdevice,
int ql2xenablezio = 0;
module_param(ql2xenablezio, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xenablezio,
- "Option to enable ZIO:If 1 then enable it otherwise"
+ "Option to enable ZIO:If 1 then enable it otherwise"
" use the default set in the NVRAM."
" Default is 0 : disabled");
@@ -89,7 +89,7 @@ static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
/*
- * SCSI host template entry points
+ * SCSI host template entry points
*/
static int qla2xxx_slave_configure(struct scsi_device * device);
static int qla2xxx_slave_alloc(struct scsi_device *);
@@ -280,7 +280,7 @@ char *
qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
{
char un_str[10];
-
+
sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
ha->fw_minor_version,
ha->fw_subminor_version);
@@ -504,14 +504,14 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
/*
* qla2x00_wait_for_hba_online
- * Wait till the HBA is online after going through
+ * Wait till the HBA is online after going through
* <= MAX_RETRIES_OF_ISP_ABORT or
* finally HBA is disabled ie marked offline
*
* Input:
* ha - pointer to host adapter structure
- *
- * Note:
+ *
+ * Note:
* Does context switching-Release SPIN_LOCK
* (if any) before calling this routine.
*
@@ -519,13 +519,13 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
* Success (Adapter is online) : 0
* Failed (Adapter is offline/disabled) : 1
*/
-static int
+static int
qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
{
int return_status;
unsigned long wait_online;
- wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
+ wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
@@ -533,8 +533,8 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
msleep(1000);
}
- if (ha->flags.online)
- return_status = QLA_SUCCESS;
+ if (ha->flags.online)
+ return_status = QLA_SUCCESS;
else
return_status = QLA_FUNCTION_FAILED;
@@ -546,27 +546,27 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
/*
* qla2x00_wait_for_loop_ready
* Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
- * to be in LOOP_READY state.
+ * to be in LOOP_READY state.
* Input:
* ha - pointer to host adapter structure
- *
- * Note:
+ *
+ * Note:
* Does context switching-Release SPIN_LOCK
* (if any) before calling this routine.
- *
+ *
*
* Return:
* Success (LOOP_READY) : 0
* Failed (LOOP_NOT_READY) : 1
*/
-static inline int
+static inline int
qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
{
int return_status = QLA_SUCCESS;
unsigned long loop_timeout ;
/* wait for 5 min at the max for loop to be ready */
- loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
+ loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
while ((!atomic_read(&ha->loop_down_timer) &&
atomic_read(&ha->loop_state) == LOOP_DOWN) ||
@@ -577,7 +577,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
break;
}
}
- return (return_status);
+ return (return_status);
}
/**************************************************************************
@@ -647,13 +647,13 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
/* Wait for the command to be returned. */
if (ret == SUCCESS) {
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
- qla_printk(KERN_ERR, ha,
+ qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
}
}
- qla_printk(KERN_INFO, ha,
+ qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
id, lun, serial, ret);
@@ -668,7 +668,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
*
* Input:
* ha - pointer to scsi_qla_host structure.
-* t - target
+* t - target
* Returns:
* Either SUCCESS or FAILED.
*
@@ -717,7 +717,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
* executing commands.
*
* NOTE: The use of SP is undefined within this context. Do *NOT*
-* attempt to use this value, even if you determine it is
+* attempt to use this value, even if you determine it is
* non-null.
*
* Input:
@@ -793,7 +793,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
"commands\n", __func__, ha->host_no));
qla_printk(KERN_INFO, ha,
"%s: failed while waiting for commands\n",
- __func__);
+ __func__);
goto eh_dev_reset_done;
}
@@ -959,7 +959,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
/*
* Fixme-may be dpc thread is active and processing
- * loop_resync,so wait a while for it to
+ * loop_resync,so wait a while for it to
* be completed and then issue big hammer.Otherwise
* it may cause I/O failure as big hammer marks the
* devices as lost kicking of the port_down_timer
@@ -974,7 +974,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
goto eh_host_reset_lock;
- }
+ }
clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
/* Waiting for our command in done_queue to be returned to OS.*/
@@ -1020,7 +1020,7 @@ qla2x00_loop_reset(scsi_qla_host_t *ha)
}
if (status == QLA_SUCCESS &&
- ((!ha->flags.enable_target_reset &&
+ ((!ha->flags.enable_target_reset &&
!ha->flags.enable_lip_reset) ||
ha->flags.enable_lip_full_login)) {
@@ -1139,7 +1139,7 @@ qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
if (pci_set_consistent_dma_mask(ha->pdev,
DMA_64BIT_MASK)) {
- qla_printk(KERN_DEBUG, ha,
+ qla_printk(KERN_DEBUG, ha,
"Failed to set 64 bit PCI consistent mask; "
"using 32 bit.\n");
pci_set_consistent_dma_mask(ha->pdev,
@@ -1666,7 +1666,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
{
if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
fc_remote_port_block(fcport->rport);
- /*
+ /*
* We may need to retry the login, so don't change the state of the
* port but do the retries.
*/
@@ -1711,7 +1711,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
* Context:
*/
void
-qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha)
+qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha)
{
fc_port_t *fcport;
@@ -2061,11 +2061,11 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
*
* Context:
* Kernel context.
- *
+ *
* Note: Sets the ref_count for non Null sp to one.
*/
static int
-qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
+qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
{
int rval;
@@ -2081,10 +2081,10 @@ qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
/*
* This routine frees all adapter allocated memory.
- *
+ *
*/
static void
-qla2x00_free_sp_pool( scsi_qla_host_t *ha)
+qla2x00_free_sp_pool( scsi_qla_host_t *ha)
{
if (ha->srb_mempool) {
mempool_destroy(ha->srb_mempool);
@@ -2223,7 +2223,7 @@ qla2x00_do_dpc(void *data)
DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
ha->host_no, fcport->loop_id));
-
+
fcport->port_login_retry_count =
ha->port_down_retry_count * PORT_RETRY_TIME;
atomic_set(&fcport->state, FCS_ONLINE);
@@ -2254,7 +2254,7 @@ qla2x00_do_dpc(void *data)
clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
ha->host_no));
-
+
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
@@ -2315,7 +2315,7 @@ qla2x00_do_dpc(void *data)
* ha = adapter block pointer.
*/
static void
-qla2x00_rst_aen(scsi_qla_host_t *ha)
+qla2x00_rst_aen(scsi_qla_host_t *ha)
{
if (ha->flags.online && !ha->flags.reset_active &&
!atomic_read(&ha->loop_down_timer) &&
@@ -2386,7 +2386,7 @@ qla2x00_timer(scsi_qla_host_t *ha)
*
* Whenever, a port is in the LOST state we start decrementing its port
* down timer every second until it reaches zero. Once it reaches zero
- * the port it marked DEAD.
+ * the port it marked DEAD.
*/
t = 0;
list_for_each_entry(fcport, &ha->fcports, list) {
@@ -2398,9 +2398,9 @@ qla2x00_timer(scsi_qla_host_t *ha)
if (atomic_read(&fcport->port_down_timer) == 0)
continue;
- if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
+ if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
atomic_set(&fcport->state, FCS_DEVICE_DEAD);
-
+
DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
"%d remaining\n",
ha->host_no,
@@ -2422,7 +2422,7 @@ qla2x00_timer(scsi_qla_host_t *ha)
ha->host_no));
if (!IS_QLA2100(ha) && ha->link_down_timeout)
- atomic_set(&ha->loop_state, LOOP_DEAD);
+ atomic_set(&ha->loop_state, LOOP_DEAD);
/* Schedule an ISP abort to return any tape commands. */
spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 11:15:04 +0000