aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c8
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c28
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c10
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c5
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h4
5 files changed, 30 insertions, 25 deletions
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 89793c1c06b..5c5d2315cfa 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -970,7 +970,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
int rval;
uint32_t cnt, timer;
uint32_t risc_address;
- uint16_t mb[4];
+ uint16_t mb[4], wd;
uint32_t stat;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
@@ -1514,10 +1514,10 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
WRT_REG_DWORD(&reg->ctrl_status,
CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
- RD_REG_DWORD(&reg->ctrl_status);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
+ udelay(100);
/* Wait for firmware to complete NVRAM accesses. */
- udelay(5);
mb[0] = (uint32_t) RD_REG_WORD(&reg->mailbox0);
for (cnt = 10000 ; cnt && mb[0]; cnt--) {
udelay(5);
@@ -1525,7 +1525,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
barrier();
}
- udelay(20);
+ /* Wait for soft-reset to complete. */
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_DWORD(&reg->ctrl_status) &
CSRX_ISP_SOFT_RESET) == 0)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 72d9090df3d..2d720121a0d 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -147,8 +147,8 @@ check_fw_ready_again:
* LIP to complete
*/
- if (atomic_read(&ha->loop_state) ==
- LOOP_DOWN && retry--) {
+ if (atomic_read(&ha->loop_state) !=
+ LOOP_READY && retry--) {
goto check_fw_ready_again;
}
wait_time--;
@@ -567,6 +567,7 @@ qla24xx_reset_risc(scsi_qla_host_t *ha)
unsigned long flags = 0;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
uint32_t cnt, d2;
+ uint16_t wd;
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -581,10 +582,10 @@ qla24xx_reset_risc(scsi_qla_host_t *ha)
WRT_REG_DWORD(&reg->ctrl_status,
CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
- RD_REG_DWORD(&reg->ctrl_status);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
+ udelay(100);
/* Wait for firmware to complete NVRAM accesses. */
- udelay(5);
d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
for (cnt = 10000 ; cnt && d2; cnt--) {
udelay(5);
@@ -592,7 +593,7 @@ qla24xx_reset_risc(scsi_qla_host_t *ha)
barrier();
}
- udelay(20);
+ /* Wait for soft-reset to complete. */
d2 = RD_REG_DWORD(&reg->ctrl_status);
for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
udelay(5);
@@ -1258,9 +1259,15 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
rval = qla2x00_get_adapter_id(ha,
&loop_id, &al_pa, &area, &domain, &topo);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "ERROR -- Unable to get host loop ID.\n");
- set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) ||
+ (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
+ DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
+ __func__, ha->host_no));
+ } else {
+ qla_printk(KERN_WARNING, ha,
+ "ERROR -- Unable to get host loop ID.\n");
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ }
return (rval);
}
@@ -1789,7 +1796,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha)
}
if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) {
- if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
+ if (LOOP_NOT_READY(ha)) {
rval = QLA_FUNCTION_FAILED;
} else {
rval = qla2x00_configure_fabric(ha);
@@ -2362,8 +2369,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
if (qla2x00_is_reserved_id(ha, loop_id))
continue;
- if (atomic_read(&ha->loop_down_timer) ||
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
+ if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha))
break;
if (swl != NULL) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ad3cacb9192..9746cd1e664 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -868,10 +868,6 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no);)
fcport = sp->fcport;
- if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
- atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
- return 1;
- }
spin_lock_irqsave(&ha->hardware_lock, flags);
for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
@@ -1008,6 +1004,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
mcp->tov = 30;
mcp->flags = 0;
rval = qla2x00_mailbox_command(ha, mcp);
+ if (mcp->mb[0] == MBS_COMMAND_ERROR)
+ rval = QLA_COMMAND_ERROR;
/* Return data. */
*id = mcp->mb[1];
@@ -2179,10 +2177,6 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
fcport = sp->fcport;
- if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
- atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
- return QLA_FUNCTION_FAILED;
- }
spin_lock_irqsave(&ha->hardware_lock, flags);
for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 4bec0b4fb6b..d54d2a99c3d 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -126,6 +126,7 @@ qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
/* Wait for NVRAM to become ready */
WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+ RD_REG_WORD(&reg->nvram); /* PCI Posting. */
do {
NVRAM_DELAY();
word = RD_REG_WORD(&reg->nvram);
@@ -178,6 +179,7 @@ qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
/* Wait for NVRAM to become ready */
WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+ RD_REG_WORD(&reg->nvram); /* PCI Posting. */
do {
NVRAM_DELAY();
word = RD_REG_WORD(&reg->nvram);
@@ -235,6 +237,7 @@ qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
/* Read data from NVRAM. */
for (cnt = 0; cnt < 16; cnt++) {
WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
+ RD_REG_WORD(&reg->nvram); /* PCI Posting. */
NVRAM_DELAY();
data <<= 1;
reg_data = RD_REG_WORD(&reg->nvram);
@@ -337,6 +340,7 @@ qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
/* Wait for NVRAM to become ready. */
WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+ RD_REG_WORD(&reg->nvram); /* PCI Posting. */
do {
NVRAM_DELAY();
word = RD_REG_WORD(&reg->nvram);
@@ -388,6 +392,7 @@ qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
/* Wait for NVRAM to become ready. */
WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+ RD_REG_WORD(&reg->nvram); /* PCI Posting. */
do {
NVRAM_DELAY();
word = RD_REG_WORD(&reg->nvram);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 0d5472f2f59..f7937f7f9c6 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.00-k"
+#define QLA2XXX_VERSION "8.01.03-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
-#define QLA_DRIVER_PATCH_VER 0
+#define QLA_DRIVER_PATCH_VER 3
#define QLA_DRIVER_BETA_VER 0
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 02:43:11 +0000