diff options
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_attr.c | 6 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_gbl.h | 1 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 111 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 5 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_mbx.c | 16 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_mid.c | 1 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 29 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 23 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_version.h | 2 |
9 files changed, 127 insertions, 67 deletions
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c7acef50d5d..33a3c13fd89 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) struct Scsi_Host *host = rport_to_shost(rport); fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + qla2x00_abort_fcport_cmds(fcport); /* @@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) { fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + /* * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba491335375..a336b4bc81a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern void qla81xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla2x00_loop_resync(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2d4f32b4df5..f6368a1d302 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1258,35 +1258,48 @@ qla2x00_init_rings(scsi_qla_host_t *vha) { int rval; unsigned long flags = 0; - int cnt; + int cnt, que; struct qla_hw_data *ha = vha->hw; - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req; + struct rsp_que *rsp; + struct scsi_qla_host *vp; struct mid_init_cb_24xx *mid_init_cb = (struct mid_init_cb_24xx *) ha->init_cb; spin_lock_irqsave(&ha->hardware_lock, flags); /* Clear outstanding commands array. */ - for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) - req->outstanding_cmds[cnt] = NULL; + for (que = 0; que < ha->max_queues; que++) { + req = ha->req_q_map[que]; + if (!req) + continue; + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) + req->outstanding_cmds[cnt] = NULL; - req->current_outstanding_cmd = 0; + req->current_outstanding_cmd = 0; - /* Clear RSCN queue. */ - vha->rscn_in_ptr = 0; - vha->rscn_out_ptr = 0; + /* Initialize firmware. */ + req->ring_ptr = req->ring; + req->ring_index = 0; + req->cnt = req->length; + } - /* Initialize firmware. */ - req->ring_ptr = req->ring; - req->ring_index = 0; - req->cnt = req->length; - rsp->ring_ptr = rsp->ring; - rsp->ring_index = 0; + for (que = 0; que < ha->max_queues; que++) { + rsp = ha->rsp_q_map[que]; + if (!rsp) + continue; + rsp->ring_ptr = rsp->ring; + rsp->ring_index = 0; - /* Initialize response queue entries */ - qla2x00_init_response_q_entries(rsp); + /* Initialize response queue entries */ + qla2x00_init_response_q_entries(rsp); + } + /* Clear RSCN queue. */ + list_for_each_entry(vp, &ha->vp_list, list) { + vp->rscn_in_ptr = 0; + vp->rscn_out_ptr = 0; + } ha->isp_ops->config_rings(vha); spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -3212,8 +3225,8 @@ qla2x00_loop_resync(scsi_qla_host_t *vha) int rval = QLA_SUCCESS; uint32_t wait_time; struct qla_hw_data *ha = vha->hw; - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req = ha->req_q_map[vha->req_ques[0]]; + struct rsp_que *rsp = req->rsp; atomic_set(&vha->loop_state, LOOP_UPDATE); clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); @@ -3492,6 +3505,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) } req = ha->req_q_map[i]; if (req) { + /* Clear outstanding commands array. */ req->options &= ~BIT_0; ret = qla25xx_init_req_que(base_vha, req, req->options); if (ret != QLA_SUCCESS) @@ -3500,7 +3514,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) req->id)); else DEBUG2_17(printk(KERN_WARNING - "%s Rsp que:%d inited\n", __func__, + "%s Req que:%d inited\n", __func__, req->id)); } } @@ -3548,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware @@ -3833,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4008,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4029,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4119,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { @@ -4151,8 +4206,8 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha) uint16_t mb[MAILBOX_REGISTER_COUNT]; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req = ha->req_q_map[vha->req_ques[0]]; + struct rsp_que *rsp = req->rsp; if (!vha->vp_idx) return -EINVAL; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 789fc576f22..e28ad81baf1 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha) static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { +#define MIN_MSIX_COUNT 2 int i, ret; struct msix_entry *entries; struct qla_msix_entry *qentry; @@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { + if (ret < MIN_MSIX_COUNT) + goto msix_failed; + qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n" " Retry with %d vectors\n", ha->msix_count, ret, ret); ha->msix_count = ret; ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { +msix_failed: qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable" " support, giving up -- %d/%d\n", ha->msix_count, ret); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index db4df45234a..f94ffbb98e9 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) * seconds. This is to serialize actual issuing of mailbox cmds during * non ISP abort time. */ - if (!abort_active) { - if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, - mcp->tov * HZ)) { - /* Timeout occurred. Return error. */ - DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, base_vha->host_no)); - return QLA_FUNCTION_TIMEOUT; - } + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { + /* Timeout occurred. Return error. */ + DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; } ha->flags.mbox_busy = 1; @@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } /* Allow next mbx cmd to come in. */ - if (!abort_active) - complete(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 886323130fc..f53179c4642 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -629,6 +629,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, req->ring_index = 0; req->cnt = req->length; req->id = que_id; + req->max_q_depth = ha->req_q_map[0]->max_q_depth; mutex_unlock(&ha->vport_lock); ret = qla25xx_init_req_que(base_vha, req, options); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4a71f522f92..c11f872d3e1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging, static void qla2x00_free_device(scsi_qla_host_t *); -static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); - int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, @@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(vha, sp, req)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, vha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, vha->host_no)); @@ -1158,8 +1157,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) struct req_que *req; spin_lock_irqsave(&ha->hardware_lock, flags); - for (que = 0; que < QLA_MAX_HOST_QUES; que++) { - req = ha->req_q_map[vha->req_ques[que]]; + for (que = 0; que < ha->max_queues; que++) { + req = ha->req_q_map[que]; if (!req) continue; for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { @@ -1193,7 +1192,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev) scsi_qla_host_t *vha = shost_priv(sdev->host); struct qla_hw_data *ha = vha->hw; struct fc_rport *rport = starget_to_rport(sdev->sdev_target); - struct req_que *req = ha->req_q_map[0]; + struct req_que *req = ha->req_q_map[vha->req_ques[0]]; if (sdev->tagged_supported) scsi_activate_tcq(sdev, req->max_q_depth); @@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) * supported addressing method. */ static void -qla2x00_config_dma_addressing(scsi_qla_host_t *vha) +qla2x00_config_dma_addressing(struct qla_hw_data *ha) { - struct qla_hw_data *ha = vha->hw; /* Assume a 32bit DMA mask. */ ha->flags.enable_64bit_addressing = 0; @@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = { .reset_adapter = qla24xx_reset_adapter, .nvram_config = qla81xx_nvram_config, .update_fw_options = qla81xx_update_fw_options, - .load_risc = qla24xx_load_risc, + .load_risc = qla81xx_load_risc, .pci_info_str = qla24xx_pci_info_str, .fw_version_str = qla24xx_fw_version_str, .intr_handler = qla24xx_intr_handler, @@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) set_bit(0, (unsigned long *) ha->vp_idx_map); + qla2x00_config_dma_addressing(ha); ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); if (!ret) { qla_printk(KERN_WARNING, ha, @@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "[ERROR] Failed to allocate memory for scsi_host\n"); ret = -ENOMEM; + qla2x00_mem_free(ha); + qla2x00_free_que(ha, req, rsp); goto probe_hw_failed; } pci_set_drvdata(pdev, base_vha); - qla2x00_config_dma_addressing(base_vha); - host = base_vha->host; base_vha->req_ques[0] = req->id; host->can_queue = req->length + 128; @@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_failed; - + goto probe_init_failed; /* Alloc arrays of request and response ring ptrs */ if (!qla2x00_alloc_queues(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for queue" " pointers\n"); - goto probe_failed; + goto probe_init_failed; } ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; @@ -1997,8 +1995,11 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; -probe_failed: +probe_init_failed: qla2x00_free_que(ha, req, rsp); + ha->max_queues = 0; + +probe_failed: qla2x00_free_device(base_vha); scsi_host_put(base_vha->host); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 303f8ee11f2..9c3b694c049 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { int ret; - uint32_t liter, miter; + uint32_t liter; uint32_t sec_mask, rest_addr; - uint32_t fdata, findex; + uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; - uint32_t *s, *d; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; @@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, } rest_addr = (ha->fdt_block_size >> 2) - 1; - sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2); + sec_mask = ~rest_addr; qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - - findex = faddr; - fdata = (findex & sec_mask) << 2; + fdata = (faddr & sec_mask) << 2; /* Are we at the beginning of a sector? */ - if ((findex & rest_addr) == 0) { + if ((faddr & rest_addr) == 0) { /* Do sector unprotect. */ if (ha->fdt_unprotect_sec_cmd) qla24xx_write_flash_dword(ha, @@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } @@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, /* Go with burst-write. */ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ - for (miter = 0, s = optrom, d = dwptr; - miter < OPTROM_BURST_DWORDS; miter++, s++, d++) - *s = cpu_to_le32(*d); + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); ret = qla2x00_load_ram(vha, optrom_dma, flash_data_addr(ha, faddr), diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 808bab6ef06..cfa4c11a479 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k1" +#define QLA2XXX_VERSION "8.03.00-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 |