aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/sata_nv.c30
-rw-r--r--drivers/scsi/scsi.c109
-rw-r--r--drivers/scsi/scsi_lib.c36
-rw-r--r--drivers/scsi/scsi_priv.h1
-rw-r--r--drivers/scsi/sd.c21
5 files changed, 74 insertions, 123 deletions
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index c0cf52cb975..bbbb55eeb73 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -29,6 +29,12 @@
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
+ * 0.10
+ * - Fixed spurious interrupts issue seen with the Maxtor 6H500F0 500GB
+ * drive. Also made the check_hotplug() callbacks return whether there
+ * was a hotplug interrupt or not. This was not the source of the
+ * spurious interrupts, but is the right thing to do anyway.
+ *
* 0.09
* - Fixed bug introduced by 0.08's MCP51 and MCP55 support.
*
@@ -124,10 +130,10 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void nv_host_stop (struct ata_host_set *host_set);
static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug(struct ata_host_set *host_set);
-static void nv_check_hotplug(struct ata_host_set *host_set);
+static int nv_check_hotplug(struct ata_host_set *host_set);
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
-static void nv_check_hotplug_ck804(struct ata_host_set *host_set);
+static int nv_check_hotplug_ck804(struct ata_host_set *host_set);
enum nv_host_type
{
@@ -176,7 +182,7 @@ struct nv_host_desc
enum nv_host_type host_type;
void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
void (*disable_hotplug)(struct ata_host_set *host_set);
- void (*check_hotplug)(struct ata_host_set *host_set);
+ int (*check_hotplug)(struct ata_host_set *host_set);
};
static struct nv_host_desc nv_device_tbl[] = {
@@ -309,12 +315,16 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance,
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN)))
handled += ata_host_intr(ap, qc);
+ else
+ // No request pending? Clear interrupt status
+ // anyway, in case there's one pending.
+ ap->ops->check_status(ap);
}
}
if (host->host_desc->check_hotplug)
- host->host_desc->check_hotplug(host_set);
+ handled += host->host_desc->check_hotplug(host_set);
spin_unlock_irqrestore(&host_set->lock, flags);
@@ -497,7 +507,7 @@ static void nv_disable_hotplug(struct ata_host_set *host_set)
outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
}
-static void nv_check_hotplug(struct ata_host_set *host_set)
+static int nv_check_hotplug(struct ata_host_set *host_set)
{
u8 intr_status;
@@ -522,7 +532,11 @@ static void nv_check_hotplug(struct ata_host_set *host_set)
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
+
+ return 1;
}
+
+ return 0;
}
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
@@ -560,7 +574,7 @@ static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
-static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
+static int nv_check_hotplug_ck804(struct ata_host_set *host_set)
{
u8 intr_status;
@@ -585,7 +599,11 @@ static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
+
+ return 1;
}
+
+ return 0;
}
static int __init nv_init(void)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 180676d7115..ee5f4dfdab1 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -69,7 +69,6 @@
#include "scsi_logging.h"
static void scsi_done(struct scsi_cmnd *cmd);
-static int scsi_retry_command(struct scsi_cmnd *cmd);
/*
* Definitions and constants.
@@ -752,7 +751,7 @@ static void scsi_done(struct scsi_cmnd *cmd)
* isn't running --- used by scsi_times_out */
void __scsi_done(struct scsi_cmnd *cmd)
{
- unsigned long flags;
+ struct request *rq = cmd->request;
/*
* Set the serial numbers back to zero
@@ -763,71 +762,14 @@ void __scsi_done(struct scsi_cmnd *cmd)
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
+ BUG_ON(!rq);
+
/*
- * Next, enqueue the command into the done queue.
- * It is a per-CPU queue, so we just disable local interrupts
- * and need no spinlock.
+ * The uptodate/nbytes values don't matter, as we allow partial
+ * completes and thus will check this in the softirq callback
*/
- local_irq_save(flags);
- list_add_tail(&cmd->eh_entry, &__get_cpu_var(scsi_done_q));
- raise_softirq_irqoff(SCSI_SOFTIRQ);
- local_irq_restore(flags);
-}
-
-/**
- * scsi_softirq - Perform post-interrupt processing of finished SCSI commands.
- *
- * This is the consumer of the done queue.
- *
- * This is called with all interrupts enabled. This should reduce
- * interrupt latency, stack depth, and reentrancy of the low-level
- * drivers.
- */
-static void scsi_softirq(struct softirq_action *h)
-{
- int disposition;
- LIST_HEAD(local_q);
-
- local_irq_disable();
- list_splice_init(&__get_cpu_var(scsi_done_q), &local_q);
- local_irq_enable();
-
- while (!list_empty(&local_q)) {
- struct scsi_cmnd *cmd = list_entry(local_q.next,
- struct scsi_cmnd, eh_entry);
- /* The longest time any command should be outstanding is the
- * per command timeout multiplied by the number of retries.
- *
- * For a typical command, this is 2.5 minutes */
- unsigned long wait_for
- = cmd->allowed * cmd->timeout_per_command;
- list_del_init(&cmd->eh_entry);
-
- disposition = scsi_decide_disposition(cmd);
- if (disposition != SUCCESS &&
- time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
- sdev_printk(KERN_ERR, cmd->device,
- "timing out command, waited %lus\n",
- wait_for/HZ);
- disposition = SUCCESS;
- }
-
- scsi_log_completion(cmd, disposition);
- switch (disposition) {
- case SUCCESS:
- scsi_finish_command(cmd);
- break;
- case NEEDS_RETRY:
- scsi_retry_command(cmd);
- break;
- case ADD_TO_MLQUEUE:
- scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
- break;
- default:
- if (!scsi_eh_scmd_add(cmd, 0))
- scsi_finish_command(cmd);
- }
- }
+ rq->completion_data = cmd;
+ blk_complete_request(rq);
}
/*
@@ -840,7 +782,7 @@ static void scsi_softirq(struct softirq_action *h)
* level drivers should not become re-entrant as a result of
* this.
*/
-static int scsi_retry_command(struct scsi_cmnd *cmd)
+int scsi_retry_command(struct scsi_cmnd *cmd)
{
/*
* Restore the SCSI command state.
@@ -1273,38 +1215,6 @@ int scsi_device_cancel(struct scsi_device *sdev, int recovery)
}
EXPORT_SYMBOL(scsi_device_cancel);
-#ifdef CONFIG_HOTPLUG_CPU
-static int scsi_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- int cpu = (unsigned long)hcpu;
-
- switch(action) {
- case CPU_DEAD:
- /* Drain scsi_done_q. */
- local_irq_disable();
- list_splice_init(&per_cpu(scsi_done_q, cpu),
- &__get_cpu_var(scsi_done_q));
- raise_softirq_irqoff(SCSI_SOFTIRQ);
- local_irq_enable();
- break;
- default:
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __devinitdata scsi_cpu_nb = {
- .notifier_call = scsi_cpu_notify,
-};
-
-#define register_scsi_cpu() register_cpu_notifier(&scsi_cpu_nb)
-#define unregister_scsi_cpu() unregister_cpu_notifier(&scsi_cpu_nb)
-#else
-#define register_scsi_cpu()
-#define unregister_scsi_cpu()
-#endif /* CONFIG_HOTPLUG_CPU */
-
MODULE_DESCRIPTION("SCSI core");
MODULE_LICENSE("GPL");
@@ -1338,8 +1248,6 @@ static int __init init_scsi(void)
INIT_LIST_HEAD(&per_cpu(scsi_done_q, i));
devfs_mk_dir("scsi");
- open_softirq(SCSI_SOFTIRQ, scsi_softirq, NULL);
- register_scsi_cpu();
printk(KERN_NOTICE "SCSI subsystem initialized\n");
return 0;
@@ -1367,7 +1275,6 @@ static void __exit exit_scsi(void)
devfs_remove("scsi");
scsi_exit_procfs();
scsi_exit_queue();
- unregister_scsi_cpu();
}
subsys_initcall(init_scsi);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ba93d6e66d4..00c9bf383e2 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1493,6 +1493,41 @@ static void scsi_kill_request(struct request *req, request_queue_t *q)
__scsi_done(cmd);
}
+static void scsi_softirq_done(struct request *rq)
+{
+ struct scsi_cmnd *cmd = rq->completion_data;
+ unsigned long wait_for = cmd->allowed * cmd->timeout_per_command;
+ int disposition;
+
+ INIT_LIST_HEAD(&cmd->eh_entry);
+
+ disposition = scsi_decide_disposition(cmd);
+ if (disposition != SUCCESS &&
+ time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
+ sdev_printk(KERN_ERR, cmd->device,
+ "timing out command, waited %lus\n",
+ wait_for/HZ);
+ disposition = SUCCESS;
+ }
+
+ scsi_log_completion(cmd, disposition);
+
+ switch (disposition) {
+ case SUCCESS:
+ scsi_finish_command(cmd);
+ break;
+ case NEEDS_RETRY:
+ scsi_retry_command(cmd);
+ break;
+ case ADD_TO_MLQUEUE:
+ scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
+ break;
+ default:
+ if (!scsi_eh_scmd_add(cmd, 0))
+ scsi_finish_command(cmd);
+ }
+}
+
/*
* Function: scsi_request_fn()
*
@@ -1667,6 +1702,7 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
blk_queue_segment_boundary(q, shost->dma_boundary);
blk_queue_issue_flush_fn(q, scsi_issue_flush_fn);
+ blk_queue_softirq_done(q, scsi_softirq_done);
if (!shost->use_clustering)
clear_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f04e7e11f57..14a6198cb8d 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -44,6 +44,7 @@ extern void scsi_init_cmd_from_req(struct scsi_cmnd *cmd,
struct scsi_request *sreq);
extern void __scsi_release_request(struct scsi_request *sreq);
extern void __scsi_done(struct scsi_cmnd *cmd);
+extern int scsi_retry_command(struct scsi_cmnd *cmd);
#ifdef CONFIG_SCSI_LOGGING
void scsi_log_send(struct scsi_cmnd *cmd);
void scsi_log_completion(struct scsi_cmnd *cmd, int disposition);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 32d4d8d7b9f..4c5127ed379 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -527,7 +527,7 @@ static int sd_release(struct inode *inode, struct file *filp)
return 0;
}
-static int sd_hdio_getgeo(struct block_device *bdev, struct hd_geometry __user *loc)
+static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
struct scsi_device *sdp = sdkp->device;
@@ -545,15 +545,9 @@ static int sd_hdio_getgeo(struct block_device *bdev, struct hd_geometry __user *
else
scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
- if (put_user(diskinfo[0], &loc->heads))
- return -EFAULT;
- if (put_user(diskinfo[1], &loc->sectors))
- return -EFAULT;
- if (put_user(diskinfo[2], &loc->cylinders))
- return -EFAULT;
- if (put_user((unsigned)get_start_sect(bdev),
- (unsigned long __user *)&loc->start))
- return -EFAULT;
+ geo->heads = diskinfo[0];
+ geo->sectors = diskinfo[1];
+ geo->cylinders = diskinfo[2];
return 0;
}
@@ -593,12 +587,6 @@ static int sd_ioctl(struct inode * inode, struct file * filp,
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
- if (cmd == HDIO_GETGEO) {
- if (!arg)
- return -EINVAL;
- return sd_hdio_getgeo(bdev, p);
- }
-
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to block level and then onto mid level if they can't be
@@ -800,6 +788,7 @@ static struct block_device_operations sd_fops = {
.open = sd_open,
.release = sd_release,
.ioctl = sd_ioctl,
+ .getgeo = sd_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = sd_compat_ioctl,
#endif