diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/21285.c | 4 | ||||
| -rw-r--r-- | drivers/serial/8250_pnp.c | 12 | ||||
| -rw-r--r-- | drivers/serial/imx.c | 2 | ||||
| -rw-r--r-- | drivers/serial/ioc3_serial.c | 4 | ||||
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 20 | ||||
| -rw-r--r-- | drivers/serial/pmac_zilog.c | 11 | ||||
| -rw-r--r-- | drivers/serial/pxa.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 105 | ||||
| -rw-r--r-- | drivers/serial/serial_cs.c | 3 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 89 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 118 |
11 files changed, 214 insertions, 156 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 1e3d19397a5..8681f134505 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART"; static void serial21285_stop_tx(struct uart_port *port) { if (tx_enabled(port)) { - disable_irq(IRQ_CONTX); + disable_irq_nosync(IRQ_CONTX); tx_enabled(port) = 0; } } @@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port) static void serial21285_stop_rx(struct uart_port *port) { if (rx_enabled(port)) { - disable_irq(IRQ_CONRX); + disable_irq_nosync(IRQ_CONRX); rx_enabled(port) = 0; } } diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 36ede02ceac..24485cc62ff 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = { /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, /* Wacom tablets */ - { "WACF004", 0 }, - { "WACF005", 0 }, - { "WACF006", 0 }, - { "WACF007", 0 }, - { "WACF008", 0 }, - { "WACF009", 0 }, - { "WACF00A", 0 }, - { "WACF00B", 0 }, - { "WACF00C", 0 }, + { "WACFXXX", 0 }, /* Compaq touchscreen */ { "FPI2002", 0 }, /* Fujitsu Stylistic touchscreens */ @@ -354,6 +346,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E5", 0 }, /* Fujitsu P-series tablet PC device */ { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 18130f11238..60d665a17a8 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { /* ok, the port was enabled */ unsigned int ucr2, ubir,ubmr, uartclk; unsigned int baud_raw; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index d8983dd5c4b..85dc0410ac1 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_ops = { /** * ioc3_detect - module init called, */ -static int __devinit ioc3uart_init(void) +static int __init ioc3uart_init(void) { int ret; @@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void) return ret; } -static void __devexit ioc3uart_exit(void) +static void __exit ioc3uart_exit(void) { ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 2e02c3026d2..836d9ab4f72 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial_submodule = { /** * ioc4_serial_init - module init */ -int ioc4_serial_init(void) +static int __init ioc4_serial_init(void) { int ret; @@ -2913,20 +2913,30 @@ int ioc4_serial_init(void) printk(KERN_WARNING "%s: Couldn't register rs232 IOC4 serial driver\n", __func__); - return ret; + goto out; } if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs422 IOC4 serial driver\n", __func__); - return ret; + goto out_uart_rs232; } /* register with IOC4 main module */ - return ioc4_register_submodule(&ioc4_serial_submodule); + ret = ioc4_register_submodule(&ioc4_serial_submodule); + if (ret) + goto out_uart_rs422; + return 0; + +out_uart_rs422: + uart_unregister_driver(&ioc4_uart_rs422); +out_uart_rs232: + uart_unregister_driver(&ioc4_uart_rs232); +out: + return ret; } -static void __devexit ioc4_serial_exit(void) +static void __exit ioc4_serial_exit(void) { ioc4_unregister_submodule(&ioc4_serial_submodule); uart_unregister_driver(&ioc4_uart_rs232); diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 0700cd10b97..683e66f18e8 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap) goto ack_tx_int; } + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + if (uap->port.x_char) { uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; write_zsdata(uap, uap->port.x_char); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 4a821046baa..56ee082157a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -756,7 +756,7 @@ static int serial_pxa_resume(struct device *dev) return 0; } -static struct dev_pm_ops serial_pxa_pm_ops = { +static const struct dev_pm_ops serial_pxa_pm_ops = { .suspend = serial_pxa_suspend, .resume = serial_pxa_resume, }; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 047530b285b..7f283070951 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, } /* - * As a last resort, if the quotient is zero, - * default to 9600 bps + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. */ - if (!hung_up) - tty_termios_encode_baud_rate(termios, 9600, 9600); + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } } - + /* Should never happen */ + WARN_ON(1); return 0; } @@ -2006,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* we're going to avoid suspending serial console */ - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2019,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); return 0; } - uport->suspended = 1; + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } /* * Wait for the transmitter to empty. @@ -2047,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - ops->shutdown(uport); + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(uport)) + if (console_suspend_enabled && uart_console(uport)) console_stop(uport->cons); - uart_change_pm(state, 3); + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); mutex_unlock(&port->mutex); @@ -2073,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* no need to resume serial console, it wasn't suspended */ - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - /* - * If that's unset, use the tty termios setting. - */ - if (termios.c_cflag == 0) - termios = *state->port.tty->termios; - else { - termios.c_ispeed = termios.c_ospeed = - tty_termios_input_baud_rate(&termios); - termios.c_ispeed = termios.c_ospeed = - tty_termios_baud_rate(&termios); - } - uport->ops->set_termios(uport, &termios, NULL); - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(uport->irq); @@ -2121,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); - ret = ops->startup(uport); - if (ret == 0) { - uart_change_speed(state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(state); + if (console_suspend_enabled || !uart_console(uport)) { + ret = ops->startup(uport); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(state); + } } clear_bit(ASYNCB_SUSPENDED, &port->flags); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239c5d6..df854401af2 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link) { struct serial_info *info = link->priv; - outb(12, info->c950ctrl + 1); + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); } /* request_region? oxsemi branch does no request_region too... */ diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index ff38dbdb5c6..42f3333c4ad 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) Set SCP6MD1,0 = {01} (output) */ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - data = ctrl_inb(SCPDR); + data = __raw_readb(SCPDR); /* Set /RTS2 (bit6) = 0 */ - ctrl_outb(data & 0xbf, SCPDR); + __raw_writeb(data & 0xbf, SCPDR); } } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int status, baud, smr_val; + unsigned int status, baud, smr_val, max_baud; int t = -1; - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - if (likely(baud)) + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) t = SCBRR_VALUE(baud, port->uartclk); do { @@ -1042,11 +1052,26 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; sci_port->port.line = index; - sci_port->port.fifosize = 1; - sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; + + switch (p->type) { + case PORT_SCIFA: + sci_port->port.fifosize = 64; + break; + case PORT_SCIF: + sci_port->port.fifosize = 16; + break; + default: + sci_port->port.fifosize = 1; + break; + } + + if (dev) { + sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; + sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; + sci_port->port.dev = &dev->dev; + } sci_port->break_timer.data = (unsigned long)sci_port; sci_port->break_timer.function = sci_break_timer; @@ -1057,7 +1082,6 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; sci_port->port.flags = p->flags; - sci_port->port.dev = &dev->dev; sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); @@ -1101,7 +1125,7 @@ static void serial_console_write(struct console *co, const char *s, sci_port->disable(port); } -static int __init serial_console_setup(struct console *co, char *options) +static int __devinit serial_console_setup(struct console *co, char *options) { struct sci_port *sci_port; struct uart_port *port; @@ -1119,9 +1143,14 @@ static int __init serial_console_setup(struct console *co, char *options) if (co->index >= SCI_NPORTS) co->index = 0; - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; + if (co->data) { + port = co->data; + sci_port = to_sci_port(port); + } else { + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; + } /* * Also need to check port->type, we don't actually have any @@ -1165,6 +1194,15 @@ static int __init sci_console_init(void) return 0; } console_initcall(sci_console_init); + +static struct sci_port early_serial_port; +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, +}; +static char early_serial_buf[32]; + #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) @@ -1250,6 +1288,21 @@ static int __devinit sci_probe(struct platform_device *dev) struct sh_sci_priv *priv; int i, ret = -EINVAL; +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + if (is_early_platform_device(dev)) { + if (dev->id == -1) + return -ENOTSUPP; + early_serial_console.index = dev->id; + early_serial_console.data = &early_serial_port.port; + sci_init_single(NULL, &early_serial_port, dev->id, p); + serial_console_setup(&early_serial_console, early_serial_buf); + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + register_console(&early_serial_console); + return 0; + } +#endif + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -1312,7 +1365,7 @@ static int sci_resume(struct device *dev) return 0; } -static struct dev_pm_ops sci_dev_pm_ops = { +static const struct dev_pm_ops sci_dev_pm_ops = { .suspend = sci_suspend, .resume = sci_resume, }; @@ -1349,6 +1402,10 @@ static void __exit sci_exit(void) uart_unregister_driver(&sci_uart_driver); } +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif module_init(sci_init); module_exit(sci_exit); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index a32094eeb42..0efcded59ae 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -517,20 +517,20 @@ static const struct __attribute__((packed)) { static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xa4000150) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xa4000140) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7705) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == SCIF0) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ if (port->mapbase == SCIF2) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) @@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7757) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe4b0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4c0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4d0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe600000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe610000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe20000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe30000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ return 1; } @@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ + return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ + return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ if (port->mapbase == 0xa4e30000) - return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ + return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ if (port->mapbase == 0xa4e40000) - return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ + return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ if (port->mapbase == 0xa4e50000) - return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ + return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7724) @@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->type == PORT_SCIF) - return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; if (port->type == PORT_SCIFA) - return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) @@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ return 1; } @@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xff923000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff924000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ @@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffeb0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffec0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffed0000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffee0000) - return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffef0000) - return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ @@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe8800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7201) if (port->mapbase == 0xfffeA000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeA800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } @@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xf8400000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8410000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SHX3) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffc30000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc40000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc50000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif |