aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/serial/Kconfig12
-rw-r--r--drivers/serial/mpc52xx_uart.c251
-rw-r--r--drivers/serial/pmac_zilog.c246
-rw-r--r--drivers/serial/pmac_zilog.h34
-rw-r--r--drivers/serial/serial_cs.c7
-rw-r--r--drivers/serial/sh-sci.h220
7 files changed, 459 insertions, 326 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e9b15c3746f..a81ff7bc5fa 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
}
#endif
-#ifdef CONFIG_SERIAL_8250_AU1X00
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-#endif
-
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
- return 0x100000;
+ return 0x1000;
#ifdef CONFIG_ARCH_OMAP
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
@@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9ff47db0b2c..888a0ce91c4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1086,12 +1086,12 @@ config SERIAL_68360
default y
config SERIAL_PMACZILOG
- tristate "PowerMac z85c30 ESCC support"
- depends on PPC_OF && PPC_PMAC
+ tristate "Mac or PowerMac z85c30 ESCC support"
+ depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
select SERIAL_CORE
help
This driver supports the Zilog z85C30 serial ports found on
- PowerMac machines.
+ (Power)Mac machines.
Say Y or M if you want to be able to these serial ports.
config SERIAL_PMACZILOG_TTYS
@@ -1116,16 +1116,16 @@ config SERIAL_PMACZILOG_TTYS
unable to use the 8250 module for PCMCIA or other 16C550-style
UARTs.
- Say N unless you need the z85c30 ports on your powermac
+ Say N unless you need the z85c30 ports on your (Power)Mac
to appear as /dev/ttySn.
config SERIAL_PMACZILOG_CONSOLE
- bool "Console on PowerMac z85c30 serial port"
+ bool "Console on Mac or PowerMac z85c30 serial port"
depends on SERIAL_PMACZILOG=y
select SERIAL_CORE_CONSOLE
help
If you would like to be able to use the z85c30 serial port
- on your PowerMac as the console, you can do so by answering
+ on your (Power)Mac as the console, you can do so by answering
Y to this option.
config SERIAL_LH7A40X
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7ce9e9f567a..3119fddaedb 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -74,6 +74,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/clk.h>
#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
@@ -113,6 +114,7 @@ static void mpc52xx_uart_of_enumerate(void);
/* Forward declaration of the interruption handling routine */
static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
+static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
/* Simple macro to test if a port is console or not. This one is taken
@@ -145,6 +147,11 @@ struct psc_ops {
void (*cw_disable_ints)(struct uart_port *port);
void (*cw_restore_ints)(struct uart_port *port);
unsigned long (*getuartclk)(void *p);
+ int (*clock)(struct uart_port *port, int enable);
+ int (*fifoc_init)(void);
+ void (*fifoc_uninit)(void);
+ void (*get_irq)(struct uart_port *, struct device_node *);
+ irqreturn_t (*handle_irq)(struct uart_port *port);
};
#ifdef CONFIG_PPC_MPC52xx
@@ -256,6 +263,18 @@ static unsigned long mpc52xx_getuartclk(void *p)
return mpc5xxx_get_bus_frequency(p) / 2;
}
+static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+ port->irqflags = IRQF_DISABLED;
+ port->irq = irq_of_parse_and_map(np, 0);
+}
+
+/* 52xx specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port)
+{
+ return mpc5xxx_uart_process_int(port);
+}
+
static struct psc_ops mpc52xx_psc_ops = {
.fifo_init = mpc52xx_psc_fifo_init,
.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
@@ -273,14 +292,32 @@ static struct psc_ops mpc52xx_psc_ops = {
.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
.getuartclk = mpc52xx_getuartclk,
+ .get_irq = mpc52xx_psc_get_irq,
+ .handle_irq = mpc52xx_psc_handle_irq,
};
#endif /* CONFIG_MPC52xx */
#ifdef CONFIG_PPC_MPC512x
#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
+
+/* PSC FIFO Controller for mpc512x */
+struct psc_fifoc {
+ u32 fifoc_cmd;
+ u32 fifoc_int;
+ u32 fifoc_dma;
+ u32 fifoc_axe;
+ u32 fifoc_debug;
+};
+
+static struct psc_fifoc __iomem *psc_fifoc;
+static unsigned int psc_fifoc_irq;
+
static void mpc512x_psc_fifo_init(struct uart_port *port)
{
+ /* /32 prescaler */
+ out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00);
+
out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
out_be32(&FIFO_512x(port)->txalarm, 1);
@@ -393,6 +430,160 @@ static unsigned long mpc512x_getuartclk(void *p)
return mpc5xxx_get_bus_frequency(p);
}
+#define DEFAULT_FIFO_SIZE 16
+
+static unsigned int __init get_fifo_size(struct device_node *np,
+ char *fifo_name)
+{
+ const unsigned int *fp;
+
+ fp = of_get_property(np, fifo_name, NULL);
+ if (fp)
+ return *fp;
+
+ pr_warning("no %s property in %s node, defaulting to %d\n",
+ fifo_name, np->full_name, DEFAULT_FIFO_SIZE);
+
+ return DEFAULT_FIFO_SIZE;
+}
+
+#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
+ ((u32)(_base) + sizeof(struct mpc52xx_psc)))
+
+/* Init PSC FIFO Controller */
+static int __init mpc512x_psc_fifoc_init(void)
+{
+ struct device_node *np;
+ void __iomem *psc;
+ unsigned int tx_fifo_size;
+ unsigned int rx_fifo_size;
+ int fifobase = 0; /* current fifo address in 32 bit words */
+
+ np = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-psc-fifo");
+ if (!np) {
+ pr_err("%s: Can't find FIFOC node\n", __func__);
+ return -ENODEV;
+ }
+
+ psc_fifoc = of_iomap(np, 0);
+ if (!psc_fifoc) {
+ pr_err("%s: Can't map FIFOC\n", __func__);
+ return -ENODEV;
+ }
+
+ psc_fifoc_irq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
+ if (psc_fifoc_irq == NO_IRQ) {
+ pr_err("%s: Can't get FIFOC irq\n", __func__);
+ iounmap(psc_fifoc);
+ return -ENODEV;
+ }
+
+ for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") {
+ tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
+ rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
+
+ /* size in register is in 4 byte units */
+ tx_fifo_size /= 4;
+ rx_fifo_size /= 4;
+ if (!tx_fifo_size)
+ tx_fifo_size = 1;
+ if (!rx_fifo_size)
+ rx_fifo_size = 1;
+
+ psc = of_iomap(np, 0);
+ if (!psc) {
+ pr_err("%s: Can't map %s device\n",
+ __func__, np->full_name);
+ continue;
+ }
+
+ /* FIFO space is 4KiB, check if requested size is available */
+ if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
+ pr_err("%s: no fifo space available for %s\n",
+ __func__, np->full_name);
+ iounmap(psc);
+ /*
+ * chances are that another device requests less
+ * fifo space, so we continue.
+ */
+ continue;
+ }
+ /* set tx and rx fifo size registers */
+ out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
+ fifobase += tx_fifo_size;
+ out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
+ fifobase += rx_fifo_size;
+
+ /* reset and enable the slices */
+ out_be32(&FIFOC(psc)->txcmd, 0x80);
+ out_be32(&FIFOC(psc)->txcmd, 0x01);
+ out_be32(&FIFOC(psc)->rxcmd, 0x80);
+ out_be32(&FIFOC(psc)->rxcmd, 0x01);
+
+ iounmap(psc);
+ }
+
+ return 0;
+}
+
+static void __exit mpc512x_psc_fifoc_uninit(void)
+{
+ iounmap(psc_fifoc);
+}
+
+/* 512x specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port)
+{
+ unsigned long fifoc_int;
+ int psc_num;
+
+ /* Read pending PSC FIFOC interrupts */
+ fifoc_int = in_be32(&psc_fifoc->fifoc_int);
+
+ /* Check if it is an interrupt for this port */
+ psc_num = (port->mapbase & 0xf00) >> 8;
+ if (test_bit(psc_num, &fifoc_int) ||
+ test_bit(psc_num + 16, &fifoc_int))
+ return mpc5xxx_uart_process_int(port);
+
+ return IRQ_NONE;
+}
+
+static int mpc512x_psc_clock(struct uart_port *port, int enable)
+{
+ struct clk *psc_clk;
+ int psc_num;
+ char clk_name[10];
+
+ if (uart_console(port))
+ return 0;
+
+ psc_num = (port->mapbase & 0xf00) >> 8;
+ snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+ psc_clk = clk_get(port->dev, clk_name);
+ if (IS_ERR(psc_clk)) {
+ dev_err(port->dev, "Failed to get PSC clock entry!\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis");
+
+ if (enable)
+ clk_enable(psc_clk);
+ else
+ clk_disable(psc_clk);
+
+ return 0;
+}
+
+static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+ port->irqflags = IRQF_SHARED;
+ port->irq = psc_fifoc_irq;
+}
+
static struct psc_ops mpc512x_psc_ops = {
.fifo_init = mpc512x_psc_fifo_init,
.raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
@@ -410,6 +601,11 @@ static struct psc_ops mpc512x_psc_ops = {
.cw_disable_ints = mpc512x_psc_cw_disable_ints,
.cw_restore_ints = mpc512x_psc_cw_restore_ints,
.getuartclk = mpc512x_getuartclk,
+ .clock = mpc512x_psc_clock,
+ .fifoc_init = mpc512x_psc_fifoc_init,
+ .fifoc_uninit = mpc512x_psc_fifoc_uninit,
+ .get_irq = mpc512x_psc_get_irq,
+ .handle_irq = mpc512x_psc_handle_irq,
};
#endif
@@ -519,10 +715,15 @@ mpc52xx_uart_startup(struct uart_port *port)
struct mpc52xx_psc __iomem *psc = PSC(port);
int ret;
+ if (psc_ops->clock) {
+ ret = psc_ops->clock(port, 1);
+ if (ret)
+ return ret;
+ }
+
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- "mpc52xx_psc_uart", port);
+ port->irqflags, "mpc52xx_psc_uart", port);
if (ret)
return ret;
@@ -553,6 +754,9 @@ mpc52xx_uart_shutdown(struct uart_port *port)
port->read_status_mask = 0;
out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+ if (psc_ops->clock)
+ psc_ops->clock(port, 0);
+
/* Release interrupt */
free_irq(port->irq, port);
}
@@ -851,15 +1055,12 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
}
static irqreturn_t
-mpc52xx_uart_int(int irq, void *dev_id)
+mpc5xxx_uart_process_int(struct uart_port *port)
{
- struct uart_port *port = dev_id;
unsigned long pass = ISR_PASS_LIMIT;
unsigned int keepgoing;
u8 status;
- spin_lock(&port->lock);
-
/* While we have stuff to do, we continue */
do {
/* If we don't find anything to do, we stop */
@@ -886,11 +1087,23 @@ mpc52xx_uart_int(int irq, void *dev_id)
} while (keepgoing);
- spin_unlock(&port->lock);
-
return IRQ_HANDLED;
}
+static irqreturn_t
+mpc52xx_uart_int(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ irqreturn_t ret;
+
+ spin_lock(&port->lock);
+
+ ret = psc_ops->handle_irq(port);
+
+ spin_unlock(&port->lock);
+
+ return ret;
+}
/* ======================================================================== */
/* Console ( if applicable ) */
@@ -1152,7 +1365,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
return -EINVAL;
}
- port->irq = irq_of_parse_and_map(op->node, 0);
+ psc_ops->get_irq(port, op->node);
if (port->irq == NO_IRQ) {
dev_dbg(&op->dev, "Could not get irq\n");
return -EINVAL;
@@ -1163,10 +1376,8 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (ret) {
- irq_dispose_mapping(port->irq);
+ if (ret)
return ret;
- }
dev_set_drvdata(&op->dev, (void *)port);
return 0;
@@ -1178,10 +1389,8 @@ mpc52xx_uart_of_remove(struct of_device *op)
struct uart_port *port = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
- if (port) {
+ if (port)
uart_remove_one_port(&mpc52xx_uart_driver, port);
- irq_dispose_mapping(port->irq);
- }
return 0;
}
@@ -1288,6 +1497,15 @@ mpc52xx_uart_init(void)
mpc52xx_uart_of_enumerate();
+ /*
+ * Map the PSC FIFO Controller and init if on MPC512x.
+ */
+ if (psc_ops->fifoc_init) {
+ ret = psc_ops->fifoc_init();
+ if (ret)
+ return ret;
+ }
+
ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
if (ret) {
printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
@@ -1302,6 +1520,9 @@ mpc52xx_uart_init(void)
static void __exit
mpc52xx_uart_exit(void)
{
+ if (psc_ops->fifoc_uninit)
+ psc_ops->fifoc_uninit();
+
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
uart_unregister_driver(&mpc52xx_uart_driver);
}
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f18e8..f020de1cdd5 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -63,11 +63,17 @@
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/macio.h>
+#else
+#include <linux/platform_device.h>
+#define of_machine_is_compatible(x) (0)
+#endif
#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -83,11 +89,9 @@
static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
MODULE_LICENSE("GPL");
-#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
-
#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
#define PMACZILOG_MAJOR TTY_MAJOR
#define PMACZILOG_MINOR 64
@@ -153,8 +157,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
write_zsreg(uap, R10, regs[R10]);
/* Set TX/RX controls sans the enable bits. */
- write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
- write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
+ write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
+ write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
/* now set R7 "prime" on ESCC */
write_zsreg(uap, R15, regs[R15] | EN85C30);
@@ -205,7 +209,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
*/
static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
{
- if (!ZS_REGS_HELD(uap)) {
+ if (!ZS_REGS_HELD(uap)) {
if (ZS_TX_ACTIVE(uap)) {
uap->flags |= PMACZILOG_FLAG_REGS_HELD;
} else {
@@ -281,7 +285,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
spin_lock(&uap->port.lock);
if (swallow)
goto next_char;
- }
+ }
#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
/* A real serial line, record the character and status. */
@@ -317,7 +321,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
if (uap->port.ignore_status_mask == 0xff ||
(r1 & uap->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
+ tty_insert_flip_char(tty, ch, flag);
}
if (r1 & Rx_OVR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
write_zsreg(uap, R1, uap->curregs[R1]);
zssync(uap);
- dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+ pmz_error("pmz: rx irq flood !\n");
return tty;
}
@@ -470,47 +474,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
uap_a = pmz_get_port_A(uap);
uap_b = uap_a->mate;
-
- spin_lock(&uap_a->port.lock);
+
+ spin_lock(&uap_a->port.lock);
r3 = read_zsreg(uap_a, R3);
#ifdef DEBUG_HARD
pmz_debug("irq, r3: %x\n", r3);
#endif
- /* Channel A */
+ /* Channel A */
tty = NULL;
- if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
- if (r3 & CHAEXT)
- pmz_status_handle(uap_a);
+ if (r3 & CHAEXT)
+ pmz_status_handle(uap_a);
if (r3 & CHARxIP)
tty = pmz_receive_chars(uap_a);
- if (r3 & CHATxIP)
- pmz_transmit_chars(uap_a);
- rc = IRQ_HANDLED;
- }
- spin_unlock(&uap_a->port.lock);
+ if (r3 & CHATxIP)
+ pmz_transmit_chars(uap_a);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_a->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
if (uap_b->node == NULL)
goto out;
- spin_lock(&uap_b->port.lock);
+ spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
- if (r3 & CHBEXT)
- pmz_status_handle(uap_b);
- if (r3 & CHBRxIP)
- tty = pmz_receive_chars(uap_b);
- if (r3 & CHBTxIP)
- pmz_transmit_chars(uap_b);
- rc = IRQ_HANDLED;
- }
- spin_unlock(&uap_b->port.lock);
+ if (r3 & CHBEXT)
+ pmz_status_handle(uap_b);
+ if (r3 & CHBRxIP)
+ tty = pmz_receive_chars(uap_b);
+ if (r3 & CHBTxIP)
+ pmz_transmit_chars(uap_b);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_b->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
@@ -718,7 +722,7 @@ static void pmz_enable_ms(struct uart_port *port)
if (ZS_IS_ASLEEP(uap))
return;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(uap, R15, uap->curregs[R15]);
}
}
@@ -748,7 +752,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
if (new_reg != uap->curregs[R5]) {
uap->curregs[R5] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
if (ZS_IS_ASLEEP(uap))
return;
write_zsreg(uap, R5, uap->curregs[R5]);
@@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&port->lock, flags);
}
+#ifdef CONFIG_PPC_PMAC
+
/*
* Turn power on or off to the SCC and associated stuff
* (port drivers, modem, IR port, etc.)
@@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
return delay;
}
+#else
+
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
/*
* FixZeroBug....Works around a bug in the SCC receving channel.
* Inspired from Darwin code, 15 Sept. 2000 -DanM
@@ -908,7 +923,6 @@ static int __pmz_startup(struct uart_pmac_port *uap)
/* Remember status for DCD/CTS changes */
uap->prev_status = read_zsreg(uap, R0);
-
return pwr_delay;
}
@@ -955,9 +969,9 @@ static int pmz_startup(struct uart_port *port)
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
- dev_err(&uap->dev->ofdev.dev,
- "Unable to register zs interrupt handler.\n");
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
+ "SCC", uap)) {
+ pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
@@ -983,7 +997,7 @@ static int pmz_startup(struct uart_port *port)
if (!ZS_IS_EXTCLK(uap))
uap->curregs[R1] |= EXT_INT_ENAB;
write_zsreg(uap, R1, uap->curregs[R1]);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
pmz_debug("pmz: startup() done.\n");
@@ -1003,7 +1017,7 @@ static void pmz_shutdown(struct uart_port *port)
mutex_lock(&pmz_irq_mutex);
/* Release interrupt handler */
- free_irq(uap->port.irq, uap);
+ free_irq(uap->port.irq, uap);
spin_lock_irqsave(&port->lock, flags);
@@ -1051,7 +1065,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
{
int brg;
-
/* Switch to external clocking for IrDA high clock rates. That
* code could be re-used for Midi interfaces with different
* multipliers
@@ -1198,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
|| (read_zsreg(uap, R1) & ALL_SNT) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+ pmz_error("transmitter didn't drain\n");
return;
}
udelay(10);
@@ -1214,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
read_zsdata(uap);
mdelay(10);
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+ pmz_error("receiver didn't drain\n");
return;
}
}
@@ -1223,20 +1236,19 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
uap->curregs[R5] |= DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(1);
+ mdelay(1);
/* Switch SCC to 19200 */
pmz_convert_to_zs(uap, CS8, 0, 19200);
pmz_load_zsregs(uap, uap->curregs);
- mdelay(1);
+ mdelay(1);
/* Write get_version command byte */
write_zsdata(uap, 1);
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on get_version byte\n");
+ pmz_error("irda_setup timed out on get_version byte\n");
goto out;
}
udelay(10);
@@ -1244,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
version = read_zsdata(uap);
if (version < 4) {
- dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
- version);
+ pmz_info("IrDA: dongle version %d not supported\n", version);
goto out;
}
@@ -1254,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on speed mode byte\n");
+ pmz_error("irda_setup timed out on speed mode byte\n");
goto out;
}
udelay(10);
}
t = read_zsdata(uap);
if (t != cmdbyte)
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+ pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
- dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
+ pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
*baud, version);
(void)read_zsdata(uap);
@@ -1415,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
write_zsdata(uap, c);
}
-#endif
+#endif /* CONFIG_CONSOLE_POLL */
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
@@ -1440,6 +1449,8 @@ static struct uart_ops pmz_pops = {
#endif
};
+#ifdef CONFIG_PPC_PMAC
+
/*
* Setup one port structure after probing, HW is down at this point,
* Unlike sunzilog, we don't need to pre-init the spinlock as we don't
@@ -1463,7 +1474,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
return -ENODEV;
uap->port.mapbase = r_ports.start;
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
-
+
uap->control_reg = uap->port.membase;
uap->data_reg = uap->control_reg + 0x10;
@@ -1590,7 +1601,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
}
/*
- * Called upon match with an escc node in the devive-tree.
+ * Called upon match with an escc node in the device-tree.
*/
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
@@ -1812,7 +1823,7 @@ static int __init pmz_probe(void)
pmz_ports[count].node = node_a;
pmz_ports[count+1].node = node_b;
pmz_ports[count].port.line = count;
- pmz_ports[count+1].port.line = count+1;
+ pmz_ports[count+1].port.line = count+1;
/*
* Setup the ports for real
@@ -1836,6 +1847,88 @@ next:
return 0;
}
+#else
+
+extern struct platform_device scc_a_pdev, scc_b_pdev;
+
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+ struct resource *r_ports;
+ int irq;
+
+ r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->node, 0);
+ if (!r_ports || !irq)
+ return -ENODEV;
+
+ uap->port.mapbase = r_ports->start;
+ uap->port.membase = (unsigned char __iomem *) r_ports->start;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = irq;
+ uap->port.uartclk = ZS_CLOCK;
+ uap->port.fifosize = 1;
+ uap->port.ops = &pmz_pops;
+ uap->port.type = PORT_PMAC_ZILOG;
+ uap->port.flags = 0;
+
+ uap->control_reg = uap->port.membase;
+ uap->data_reg = uap->control_reg + 4;
+ uap->port_type = 0;
+
+ pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+ return 0;
+}
+
+static int __init pmz_probe(void)
+{
+ int err;
+
+ pmz_ports_count = 0;
+
+ pmz_ports[0].mate = &pmz_ports[1];
+ pmz_ports[0].port.line = 0;
+ pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
+ pmz_ports[0].node = &scc_a_pdev;
+ err = pmz_init_port(&pmz_ports[0]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ pmz_ports[1].mate = &pmz_ports[0];
+ pmz_ports[1].port.line = 1;
+ pmz_ports[1].flags = 0;
+ pmz_ports[1].node = &scc_b_pdev;
+ err = pmz_init_port(&pmz_ports[1]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ return 0;
+}
+
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+ memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+static int __init pmz_attach(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < pmz_ports_count; i++)
+ if (pmz_ports[i].node == pdev)
+ return 0;
+ return -ENODEV;
+}
+
+static int __exit pmz_detach(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
static void pmz_console_write(struct console *con, const char *s, unsigned int count);
@@ -1896,28 +1989,41 @@ err_out:
return rc;
}
+#ifdef CONFIG_PPC_PMAC
+
static struct of_device_id pmz_match[] =
{
{
- .name = "ch-a",
+ .name = "ch-a",
},
{
- .name = "ch-b",
+ .name = "ch-b",
},
{},
};
MODULE_DEVICE_TABLE (of, pmz_match);
-static struct macio_driver pmz_driver =
-{
+static struct macio_driver pmz_driver = {
.name = "pmac_zilog",
.match_table = pmz_match,
.probe = pmz_attach,
.remove = pmz_detach,
.suspend = pmz_suspend,
- .resume = pmz_resume,
+ .resume = pmz_resume,
};
+#else
+
+static struct platform_driver pmz_driver = {
+ .remove = __exit_p(pmz_detach),
+ .driver = {
+ .name = "scc",
+ .owner = THIS_MODULE,
+ },
+};
+
+#endif /* !CONFIG_PPC_PMAC */
+
static int __init init_pmz(void)
{
int rc, i;
@@ -1952,19 +2058,27 @@ static int __init init_pmz(void)
pmz_dispose_port(&pmz_ports[i]);
return rc;
}
-
+
/*
* Then we register the macio driver itself
*/
+#ifdef CONFIG_PPC_PMAC
return macio_register_driver(&pmz_driver);
+#else
+ return platform_driver_probe(&pmz_driver, pmz_attach);
+#endif
}
static void __exit exit_pmz(void)
{
int i;
+#ifdef CONFIG_PPC_PMAC
/* Get rid of macio-driver (detach from macio) */
macio_unregister_driver(&pmz_driver);
+#else
+ platform_driver_unregister(&pmz_driver);
+#endif
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
@@ -2031,10 +2145,10 @@ static int __init pmz_console_setup(struct console *co, char *options)
/*
* XServe's default to 57600 bps
*/
- if (machine_is_compatible("RackMac1,1")
- || machine_is_compatible("RackMac1,2")
- || machine_is_compatible("MacRISC4"))
- baud = 57600;
+ if (of_machine_is_compatible("RackMac1,1")
+ || of_machine_is_compatible("RackMac1,2")
+ || of_machine_is_compatible("MacRISC4"))
+ baud = 57600;
/*
* Check whether an invalid uart number has been specified, and
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
index f6e77f12acd..cbc34fbb1b2 100644
--- a/drivers/serial/pmac_zilog.h
+++ b/drivers/serial/pmac_zilog.h
@@ -1,7 +1,15 @@
#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__
-#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+#ifdef CONFIG_PPC_PMAC
+#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
+#else
+#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
+#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
+#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg)
+#endif
/*
* At most 2 ESCCs with 2 ports each
@@ -17,6 +25,7 @@ struct uart_pmac_port {
struct uart_port port;
struct uart_pmac_port *mate;
+#ifdef CONFIG_PPC_PMAC
/* macio_dev for the escc holding this port (maybe be null on
* early inited port)
*/
@@ -25,6 +34,9 @@ struct uart_pmac_port {
* of "escc" node (ie. ch-a or ch-b)
*/
struct device_node *node;
+#else
+ struct platform_device *node;
+#endif
/* Port type as obtained from device tree (IRDA, modem, ...) */
int port_type;
@@ -55,10 +67,12 @@ struct uart_pmac_port {
volatile u8 __iomem *control_reg;
volatile u8 __iomem *data_reg;
+#ifdef CONFIG_PPC_PMAC
unsigned int tx_dma_irq;
unsigned int rx_dma_irq;
volatile struct dbdma_regs __iomem *tx_dma_regs;
volatile struct dbdma_regs __iomem *rx_dma_regs;
+#endif
struct ktermios termios_cache;
};
@@ -113,7 +127,7 @@ static inline void zssync(struct uart_pmac_port *port)
#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
-#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */
+#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */
/* The Zilog register set */
@@ -171,7 +185,7 @@ static inline void zssync(struct uart_pmac_port *port)
/* Write Register 3 */
-#define RxENABLE 0x1 /* Rx Enable */
+#define RxENABLE 0x1 /* Rx Enable */
#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
@@ -185,7 +199,7 @@ static inline void zssync(struct uart_pmac_port *port)
/* Write Register 4 */
-#define PAR_ENAB 0x1 /* Parity Enable */
+#define PAR_ENAB 0x1 /* Parity Enable */
#define PAR_EVEN 0x2 /* Parity Even/Odd* */
#define SYNC_ENAB 0 /* Sync Modes Enable */
@@ -210,7 +224,7 @@ static inline void zssync(struct uart_pmac_port *port)
#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
#define RTS 0x2 /* RTS */
#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
-#define TxENABLE 0x8 /* Tx Enable */
+#define TxENABLE 0x8 /* Tx Enable */
#define SND_BRK 0x10 /* Send Break */
#define Tx5 0x0 /* Tx 5 bits (or less)/character */
#define Tx7 0x20 /* Tx 7 bits/character */
@@ -372,11 +386,11 @@ static inline void zssync(struct uart_pmac_port *port)
#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
-#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
+#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
-#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
-#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
+#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
+#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
+#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
+#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
#endif /* __PMAC_ZILOG_H__ */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 95421fa3b30..e91db4b3801 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -696,11 +696,11 @@ static int serial_config(struct pcmcia_device * link)
info->multi = info->quirk->multi;
if (info->multi > 1)
- multi_config(link);
+ i = multi_config(link);
else
- simple_config(link);
+ i = simple_config(link);
- if (info->ndev == 0)
+ if (i || info->ndev == 0)
goto failed;
/*
@@ -715,6 +715,7 @@ static int serial_config(struct pcmcia_device * link)
return 0;
failed:
+ dev_warn(&link->dev, "serial_cs: failed to initialize\n");
serial_remove(link);
return -ENODEV;
}
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 0efcded59ae..f7d2589926d 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -518,34 +518,6 @@ static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffffe80)
return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
- if (port->mapbase == 0xa4000150)
- return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xa4000140)
- return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == SCIF0)
- return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
- if (port->mapbase == SCIF2)
- return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xa4430000)
- return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
- else if (port->mapbase == 0xa4438000)
- return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
@@ -558,207 +530,17 @@ static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
- if (port->mapbase == 0xffe80000)
- return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe80000)
- return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfe4b0000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0;
- if (port->mapbase == 0xfe4c0000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0;
- if (port->mapbase == 0xfe4d0000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfe600000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfe610000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfe620000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe20000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe30000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
- if (port->mapbase == 0xffe10000)
- return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
- if (port->mapbase == 0xffe20000)
- return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
-
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
- if (port->mapbase == 0xffe10000)
- return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
- if (port->mapbase == 0xffe20000)
- return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
- if (port->mapbase == 0xa4e30000)
- return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
- if (port->mapbase == 0xa4e40000)
- return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
- if (port->mapbase == 0xa4e50000)
- return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-# define SCFSR 0x0010
-# define SCASSR 0x0014
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->type == PORT_SCIF)
- return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
- if (port->type == PORT_SCIFA)
- return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
-}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
{
int ch = (port->mapbase - SMR0) >> 3;
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe08000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
-
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xff923000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xff924000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xff925000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffe00000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffe10000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xffea0000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffeb0000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffec0000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffed0000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffee0000)
- return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffef0000)
- return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
- defined(CONFIG_CPU_SUBTYPE_SH7203) || \
- defined(CONFIG_CPU_SUBTYPE_SH7206) || \
- defined(CONFIG_CPU_SUBTYPE_SH7263)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfffe8000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe8800)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe9000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffe9800)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
- if (port->mapbase == 0xfffeA000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeA800)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeB000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xfffeB800)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
-#endif
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xf8400000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xf8410000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xf8420000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#else /* default case for non-SCI processors */
static inline int sci_rxd_in(struct uart_port *port)
{
- if (port->mapbase == 0xffc30000)
- return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc40000)
- return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc50000)
- return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
- if (port->mapbase == 0xffc60000)
- return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#endif