aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68328serial.c21
-rw-r--r--drivers/serial/68360serial.c28
-rw-r--r--drivers/serial/8250_early.c2
-rw-r--r--drivers/serial/Kconfig43
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/bfin_5xx.c4
-rw-r--r--drivers/serial/bfin_sport_uart.c614
-rw-r--r--drivers/serial/bfin_sport_uart.h63
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/crisv10.c31
-rw-r--r--drivers/serial/ioc3_serial.c36
-rw-r--r--drivers/serial/ioc4_serial.c32
-rw-r--r--drivers/serial/kgdboc.c6
-rw-r--r--drivers/serial/mcfserial.c22
-rw-r--r--drivers/serial/netx-serial.c1
-rw-r--r--drivers/serial/s3c2410.c13
-rw-r--r--drivers/serial/sa1100.c4
-rw-r--r--drivers/serial/serial_core.c54
-rw-r--r--drivers/serial/sh-sci.c2
-rw-r--r--drivers/serial/sn_console.c2
-rw-r--r--drivers/serial/uartlite.c2
-rw-r--r--drivers/serial/ucc_uart.c4
22 files changed, 849 insertions, 138 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 2b8a410e095..bbf5bc5892c 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -200,7 +200,7 @@ static void rs_stop(struct tty_struct *tty)
local_irq_restore(flags);
}
-static void rs_put_char(char ch)
+static int rs_put_char(char ch)
{
int flags, loops = 0;
@@ -214,6 +214,7 @@ static void rs_put_char(char ch)
UTX_TXDATA = ch;
udelay(5);
local_irq_restore(flags);
+ return 1;
}
static void rs_start(struct tty_struct *tty)
@@ -1017,18 +1018,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
tty_wait_until_sent(tty, 0);
send_break(info, arg ? arg*(100) : 250);
return 0;
- case TIOCGSOFTCAR:
- error = put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long *) arg);
- if (error)
- return error;
- return 0;
- case TIOCSSOFTCAR:
- get_user(arg, (unsigned long *) arg);
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
case TIOCGSERIAL:
if (access_ok(VERIFY_WRITE, (void *) arg,
sizeof(struct serial_struct)))
@@ -1061,9 +1050,6 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
-
change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1140,8 +1126,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index f5946360187..d9d4e9552a4 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -995,10 +995,10 @@ static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
volatile QUICC_BD *bdp;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
- return;
+ return 0;
if (!tty)
- return;
+ return 0;
bdp = info->tx_cur;
while (bdp->status & BD_SC_READY);
@@ -1016,6 +1016,7 @@ static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
+ return 1;
}
@@ -1246,7 +1247,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
#ifdef modem_control
unsigned char control, status;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
@@ -1277,12 +1278,12 @@ static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned int arg;
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
-
+ /* FIXME: locking on info->mcr */
if (set & TIOCM_RTS)
info->mcr |= UART_MCR_RTS;
if (set & TIOCM_DTR)
@@ -1436,18 +1437,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
return retval;
end_break(info);
return 0;
- case TIOCGSOFTCAR:
- /* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */
- put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg);
- return 0;
- case TIOCSSOFTCAR:
- error = get_user(arg, (unsigned int *) arg);
- if (error)
- return error;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
#ifdef maybe
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info(info, (unsigned int *) arg);
@@ -1665,8 +1654,7 @@ static void rs_360_close(struct tty_struct *tty, struct file * filp)
rs_360_wait_until_sent(tty, info->timeout);
}
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ rs_360_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
@@ -1717,6 +1705,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
printk("jiff=%lu...", jiffies);
#endif
+ lock_kernel();
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
@@ -1745,6 +1734,7 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
+ unlock_kernel();
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 38776e8b064..cd898704ba4 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -156,7 +156,7 @@ static int __init parse_options(struct early_serial8250_device *device,
port->membase = ioremap(port->mapbase, 64);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
- __FUNCTION__,
+ __func__,
(unsigned long long)port->mapbase);
return -ENOMEM;
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 34b809e3b59..36acbcca2d4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1355,4 +1355,47 @@ config SERIAL_SC26XX_CONSOLE
help
Support for Console on SC2681/SC2692 serial ports.
+config SERIAL_BFIN_SPORT
+ tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
+ depends on BFIN && EXPERIMENTAL
+ select SERIAL_CORE
+ help
+ Enble support SPORT emulate UART on Blackfin series.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_sport_uart.
+
+choice
+ prompt "Baud rate for Blackfin SPORT UART"
+ depends on SERIAL_BFIN_SPORT
+ default SERIAL_SPORT_BAUD_RATE_57600
+ help
+ Choose a baud rate for the SPORT UART, other uart settings are
+ 8 bit, 1 stop bit, no parity, no flow control.
+
+config SERIAL_SPORT_BAUD_RATE_115200
+ bool "115200"
+
+config SERIAL_SPORT_BAUD_RATE_57600
+ bool "57600"
+
+config SERIAL_SPORT_BAUD_RATE_38400
+ bool "38400"
+
+config SERIAL_SPORT_BAUD_RATE_19200
+ bool "19200"
+
+config SERIAL_SPORT_BAUD_RATE_9600
+ bool "9600"
+endchoice
+
+config SPORT_BAUD_RATE
+ int
+ depends on SERIAL_BFIN_SPORT
+ default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
+ default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
+ default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
+ default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
+ default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index f02ff9fad01..0d9c09b1e83 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
+obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 5f55534a290..8a2f6a1baa7 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -762,7 +762,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
break;
default:
printk(KERN_ERR "%s: word lengh not supported\n",
- __FUNCTION__);
+ __func__);
}
if (termios->c_cflag & CSTOPB)
@@ -1029,7 +1029,7 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
*baud = get_sclk() / (16*(dll | dlh << 8));
}
- pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
+ pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
}
#endif
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
new file mode 100644
index 00000000000..aca1240ad80
--- /dev/null
+++ b/drivers/serial/bfin_sport_uart.c
@@ -0,0 +1,614 @@
+/*
+ * File: linux/drivers/serial/bfin_sport_uart.c
+ *
+ * Based on: drivers/serial/bfin_5xx.c by Aubrey Li.
+ * Author: Roy Huang <roy.huang@analog.com>
+ *
+ * Created: Nov 22, 2006
+ * Copyright: (c) 2006-2007 Analog Devices Inc.
+ * Description: this driver enable SPORTs on Blackfin emulate UART.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * This driver and the hardware supported are in term of EE-191 of ADI.
+ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * This application note describe how to implement a UART on a Sharc DSP,
+ * but this driver is implemented on Blackfin Processor.
+ */
+
+/* After reset, there is a prelude of low level pulse when transmit data first
+ * time. No addtional pulse in following transmit.
+ * According to document:
+ * The SPORTs are ready to start transmitting or receiving data no later than
+ * three serial clock cycles after they are enabled in the SPORTx_TCR1 or
+ * SPORTx_RCR1 register. No serial clock cycles are lost from this point on.
+ * The first internal frame sync will occur one frame sync delay after the
+ * SPORTs are ready. External frame syncs can occur as soon as the SPORT is
+ * ready.
+ */
+
+/* Thanks to Axel Alatalo <axel@rubico.se> for fixing sport rx bug. Sometimes
+ * sport receives data incorrectly. The following is Axel's words.
+ * As EE-191, sport rx samples 3 times of the UART baudrate and takes the
+ * middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting,
+ * 30 samples will be required for a byte. If transmitter sends a 1/3 bit short
+ * byte due to buadrate drift, then the 30th sample of a byte, this sample is
+ * also the third sample of the stop bit, will happens on the immediately
+ * following start bit which will be thrown away and missed. Thus since parts
+ * of the startbit will be missed and the receiver will begin to drift, the
+ * effect accumulates over time until synchronization is lost.
+ * If only require 2 samples of the stopbit (by sampling in total 29 samples),
+ * then a to short byte as in the case above will be tolerated. Then the 1/3
+ * early startbit will trigger a framesync since the last read is complete
+ * after only 2/3 stopbit and framesync is active during the last 1/3 looking
+ * for a possible early startbit. */
+
+//#define DEBUG
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/delay.h>
+#include <asm/portmux.h>
+
+#include "bfin_sport_uart.h"
+
+unsigned short bfin_uart_pin_req_sport0[] =
+ {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0};
+
+unsigned short bfin_uart_pin_req_sport1[] =
+ {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0};
+
+#define DRV_NAME "bfin-sport-uart"
+
+struct sport_uart_port {
+ struct uart_port port;
+ char *name;
+
+ int tx_irq;
+ int rx_irq;
+ int err_irq;
+};
+
+static void sport_uart_tx_chars(struct sport_uart_port *up);
+static void sport_stop_tx(struct uart_port *port);
+
+static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
+{
+ pr_debug("%s value:%x\n", __FUNCTION__, value);
+ /* Place a Start and Stop bit */
+ __asm__ volatile (
+ "R2 = b#01111111100;\n\t"
+ "R3 = b#10000000001;\n\t"
+ "%0 <<= 2;\n\t"
+ "%0 = %0 & R2;\n\t"
+ "%0 = %0 | R3;\n\t"
+ :"=r"(value)
+ :"0"(value)
+ :"R2", "R3");
+ pr_debug("%s value:%x\n", __FUNCTION__, value);
+
+ SPORT_PUT_TX(up, value);
+}
+
+static inline unsigned int rx_one_byte(struct sport_uart_port *up)
+{
+ unsigned int value, extract;
+
+ value = SPORT_GET_RX32(up);
+ pr_debug("%s value:%x\n", __FUNCTION__, value);
+
+ /* Extract 8 bits data */
+ __asm__ volatile (
+ "R5 = 0;\n\t"
+ "P0 = 8;\n\t"
+ "R1 = 0x1801(Z);\n\t"
+ "R3 = 0x0300(Z);\n\t"
+ "R4 = 0;\n\t"
+ "LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
+ "R2 = extract(%1, R1.L)(Z);\n\t"
+ "R2 <<= R4;\n\t"
+ "R5 = R5 | R2;\n\t"
+ "R1 = R1 - R3;\nloop_e:\t"
+ "R4 += 1;\n\t"
+ "%0 = R5;\n\t"
+ :"=r"(extract)
+ :"r"(value)
+ :"P0", "R1", "R2","R3","R4", "R5");
+
+ pr_debug(" extract:%x\n", extract);
+ return extract;
+}
+
+static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
+{
+ int tclkdiv, tfsdiv, rclkdiv;
+
+ /* Set TCR1 and TCR2 */
+ SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+ SPORT_PUT_TCR2(up, 10);
+ pr_debug("%s TCR1:%x, TCR2:%x\n", __FUNCTION__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
+
+ /* Set RCR1 and RCR2 */
+ SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
+ SPORT_PUT_RCR2(up, 28);
+ pr_debug("%s RCR1:%x, RCR2:%x\n", __FUNCTION__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
+
+ tclkdiv = sclk/(2 * baud_rate) - 1;
+ tfsdiv = 12;
+ rclkdiv = sclk/(2 * baud_rate * 3) - 1;
+ SPORT_PUT_TCLKDIV(up, tclkdiv);
+ SPORT_PUT_TFSDIV(up, tfsdiv);
+ SPORT_PUT_RCLKDIV(up, rclkdiv);
+ SSYNC();
+ pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n",
+ __FUNCTION__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv);
+
+ return 0;
+}
+
+static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
+{
+ struct sport_uart_port *up = dev_id;
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned int ch;
+
+ do {
+ ch = rx_one_byte(up);
+ up->port.icount.rx++;
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ ;
+ else
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ } while (SPORT_GET_STAT(up) & RXNE);
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
+{
+ sport_uart_tx_chars(dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
+{
+ struct sport_uart_port *up = dev_id;
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned int stat = SPORT_GET_STAT(up);
+
+ /* Overflow in RX FIFO */
+ if (stat & ROVF) {
+ up->port.icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */
+ }
+ /* These should not happen */
+ if (stat & (TOVF | TUVF | RUVF)) {
+ printk(KERN_ERR "SPORT Error:%s %s %s\n",
+ (stat & TOVF)?"TX overflow":"",
+ (stat & TUVF)?"TX underflow":"",
+ (stat & RUVF)?"RX underflow":"");
+ SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
+ SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
+ }
+ SSYNC();
+
+ return IRQ_HANDLED;
+}
+
+/* Reqeust IRQ, Setup clock */
+static int sport_startup(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+ char buffer[20];
+ int retval;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ memset(buffer, 20, '\0');
+ snprintf(buffer, 20, "%s rx", up->name);
+ retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
+ if (retval) {
+ printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
+ return retval;
+ }
+
+ snprintf(buffer, 20, "%s tx", up->name);
+ retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
+ if (retval) {
+ printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
+ goto fail1;
+ }
+
+ snprintf(buffer, 20, "%s err", up->name);
+ retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up);
+ if (retval) {
+ printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
+ goto fail2;
+ }
+
+ if (port->line) {
+ if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME))
+ goto fail3;
+ } else {
+ if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME))
+ goto fail3;
+ }
+
+ sport_uart_setup(up, get_sclk(), port->uartclk);
+
+ /* Enable receive interrupt */
+ SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN));
+ SSYNC();
+
+ return 0;
+
+
+fail3:
+ printk(KERN_ERR DRV_NAME
+ ": Requesting Peripherals failed\n");
+
+ free_irq(up->err_irq, up);
+fail2:
+ free_irq(up->tx_irq, up);
+fail1:
+ free_irq(up->rx_irq, up);
+
+ return retval;
+
+}
+
+static void sport_uart_tx_chars(struct sport_uart_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+
+ if (SPORT_GET_STAT(up) & TXF)
+ return;
+
+ if (up->port.x_char) {
+ tx_one_byte(up, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ sport_stop_tx(&up->port);
+ return;
+ }
+
+ while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
+ tx_one_byte(up, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
+ up->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+static unsigned int sport_tx_empty(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+ unsigned int stat;
+
+ stat = SPORT_GET_STAT(up);
+ pr_debug("%s stat:%04x\n", __FUNCTION__, stat);
+ if (stat & TXHRE) {
+ return TIOCSER_TEMT;
+ } else
+ return 0;
+}
+
+static unsigned int sport_get_mctrl(struct uart_port *port)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+ return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR);
+}
+
+static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+}
+
+static void sport_stop_tx(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+ unsigned int stat;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+
+ stat = SPORT_GET_STAT(up);
+ while(!(stat & TXHRE)) {
+ udelay(1);
+ stat = SPORT_GET_STAT(up);
+ }
+ /* Although the hold register is empty, last byte is still in shift
+ * register and not sent out yet. If baud rate is lower than default,
+ * delay should be longer. For example, if the baud rate is 9600,
+ * the delay must be at least 2ms by experience */
+ udelay(500);
+
+ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
+ SSYNC();
+
+ return;
+}
+
+static void sport_start_tx(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ /* Write data into SPORT FIFO before enable SPROT to transmit */
+ sport_uart_tx_chars(up);
+
+ /* Enable transmit, then an interrupt will generated */
+ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+ SSYNC();
+ pr_debug("%s exit\n", __FUNCTION__);
+}
+
+static void sport_stop_rx(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ /* Disable sport to stop rx */
+ SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
+ SSYNC();
+}
+
+static void sport_enable_ms(struct uart_port *port)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+}
+
+static void sport_break_ctl(struct uart_port *port, int break_state)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+}
+
+static void sport_shutdown(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+
+ /* Disable sport */
+ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
+ SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
+ SSYNC();
+
+ if (port->line) {
+ peripheral_free_list(bfin_uart_pin_req_sport1);
+ } else {
+ peripheral_free_list(bfin_uart_pin_req_sport0);
+ }
+
+ free_irq(up->rx_irq, up);
+ free_irq(up->tx_irq, up);
+ free_irq(up->err_irq, up);
+}
+
+static void sport_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ pr_debug("%s enter, c_cflag:%08x\n", __FUNCTION__, termios->c_cflag);
+ uart_update_timeout(port, CS8 ,port->uartclk);
+}
+
+static const char *sport_type(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ return up->name;
+}
+
+static void sport_release_port(struct uart_port *port)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+}
+
+static int sport_request_port(struct uart_port *port)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+ return 0;
+}
+
+static void sport_config_port(struct uart_port *port, int flags)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ up->port.type = PORT_BFIN_SPORT;
+}
+
+static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+ return 0;
+}
+
+struct uart_ops sport_uart_ops = {
+ .tx_empty = sport_tx_empty,
+ .set_mctrl = sport_set_mctrl,
+ .get_mctrl = sport_get_mctrl,
+ .stop_tx = sport_stop_tx,
+ .start_tx = sport_start_tx,
+ .stop_rx = sport_stop_rx,
+ .enable_ms = sport_enable_ms,
+ .break_ctl = sport_break_ctl,
+ .startup = sport_startup,
+ .shutdown = sport_shutdown,
+ .set_termios = sport_set_termios,
+ .type = sport_type,
+ .release_port = sport_release_port,
+ .request_port = sport_request_port,
+ .config_port = sport_config_port,
+ .verify_port = sport_verify_port,
+};
+
+static struct sport_uart_port sport_uart_ports[] = {
+ { /* SPORT 0 */
+ .name = "SPORT0",
+ .tx_irq = IRQ_SPORT0_TX,
+ .rx_irq = IRQ_SPORT0_RX,
+ .err_irq= IRQ_SPORT0_ERROR,
+ .port = {
+ .type = PORT_BFIN_SPORT,
+ .iotype = UPIO_MEM,
+ .membase = (void __iomem *)SPORT0_TCR1,
+ .mapbase = SPORT0_TCR1,
+ .irq = IRQ_SPORT0_RX,
+ .uartclk = CONFIG_SPORT_BAUD_RATE,
+ .fifosize = 8,
+ .ops = &sport_uart_ops,
+ .line = 0,
+ },
+ }, { /* SPORT 1 */
+ .name = "SPORT1",
+ .tx_irq = IRQ_SPORT1_TX,
+ .rx_irq = IRQ_SPORT1_RX,
+ .err_irq= IRQ_SPORT1_ERROR,
+ .port = {
+ .type = PORT_BFIN_SPORT,
+ .iotype = UPIO_MEM,
+ .membase = (void __iomem *)SPORT1_TCR1,
+ .mapbase = SPORT1_TCR1,
+ .irq = IRQ_SPORT1_RX,
+ .uartclk = CONFIG_SPORT_BAUD_RATE,
+ .fifosize = 8,
+ .ops = &sport_uart_ops,
+ .line = 1,
+ },
+ }
+};
+
+static struct uart_driver sport_uart_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "SPORT-UART",
+ .dev_name = "ttySS",
+ .major = 204,
+ .minor = 84,
+ .nr = ARRAY_SIZE(sport_uart_ports),
+ .cons = NULL,
+};
+
+static int sport_uart_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct sport_uart_port *sport = platform_get_drvdata(dev);
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ if (sport)
+ uart_suspend_port(&sport_uart_reg, &sport->port);
+
+ return 0;
+}
+
+static int sport_uart_resume(struct platform_device *dev)
+{
+ struct sport_uart_port *sport = platform_get_drvdata(dev);
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ if (sport)
+ uart_resume_port(&sport_uart_reg, &sport->port);
+
+ return 0;
+}
+
+static int sport_uart_probe(struct platform_device *dev)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+ sport_uart_ports[dev->id].port.dev = &dev->dev;
+ uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port);
+ platform_set_drvdata(dev, &sport_uart_ports[dev->id]);
+
+ return 0;
+}
+
+static int sport_uart_remove(struct platform_device *dev)
+{
+ struct sport_uart_port *sport = platform_get_drvdata(dev);
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ platform_set_drvdata(dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&sport_uart_reg, &sport->port);
+
+ return 0;
+}
+
+static struct platform_driver sport_uart_driver = {
+ .probe = sport_uart_probe,
+ .remove = sport_uart_remove,
+ .suspend = sport_uart_suspend,
+ .resume = sport_uart_resume,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init sport_uart_init(void)
+{
+ int ret;
+
+ pr_debug("%s enter\n", __FUNCTION__);
+ ret = uart_register_driver(&sport_uart_reg);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register %s:%d\n",
+ sport_uart_reg.driver_name, ret);
+ return ret;
+ }
+
+ ret = platform_driver_register(&sport_uart_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret);
+ uart_unregister_driver(&sport_uart_reg);
+ }
+
+
+ pr_debug("%s exit\n", __FUNCTION__);
+ return ret;
+}
+
+static void __exit sport_uart_exit(void)
+{
+ pr_debug("%s enter\n", __FUNCTION__);
+ platform_driver_unregister(&sport_uart_driver);
+ uart_unregister_driver(&sport_uart_reg);
+}
+
+module_init(sport_uart_init);
+module_exit(sport_uart_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
new file mode 100644
index 00000000000..671d41cc1a3
--- /dev/null
+++ b/drivers/serial/bfin_sport_uart.h
@@ -0,0 +1,63 @@
+/*
+ * File: linux/drivers/serial/bfin_sport_uart.h
+ *
+ * Based on: include/asm-blackfin/mach-533/bfin_serial_5xx.h
+ * Author: Roy Huang <roy.huang>analog.com>
+ *
+ * Created: Nov 22, 2006
+ * Copyright: (C) Analog Device Inc.
+ * Description: this driver enable SPORTs on Blackfin emulate UART.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */
+#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */
+#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */
+#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */
+#define OFFSET_TX 0x10 /* Transmit Data Register */
+#define OFFSET_RX 0x18 /* Receive Data Register */
+#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */
+#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */
+#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */
+#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */
+#define OFFSET_STAT 0x30 /* Status Register */
+
+#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1))
+#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2))
+#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV))
+#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
+#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX))
+#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX))
+#define SPORT_GET_RX32(sport) bfin_read32(((sport)->port.membase + OFFSET_RX))
+#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1))
+#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2))
+#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
+#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV))
+#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT))
+
+#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v)
+#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v)
+#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v)
+#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v)
+#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v)
+#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v)
+#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v)
+#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v)
+#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
+#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
+#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a638ba0679a..a19dc7ef886 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1117,7 +1117,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
line = cpm_uart_id2nr(idx);
if(line < 0) {
- printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+ printk(KERN_ERR"%s(): port %d is not registered", __func__, idx);
return -EINVAL;
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 88e7c1d5b91..f9fa237aa94 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1788,7 +1788,7 @@ static unsigned int handle_descr_data(struct e100_serial *info,
if (info->recv_cnt + recvl > 65536) {
printk(KERN_CRIT
- "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __FUNCTION__, recvl);
+ "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl);
return 0;
}
@@ -1801,7 +1801,7 @@ static unsigned int handle_descr_data(struct e100_serial *info,
append_recv_buffer(info, buffer);
if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
- panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+ panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
descr->buf = virt_to_phys(buffer->buffer);
@@ -1925,7 +1925,7 @@ static int start_recv_dma(struct e100_serial *info)
/* Set up the receiving descriptors */
for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
- panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+ panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
descr[i].ctrl = d_int;
descr[i].buf = virt_to_phys(buffer->buffer);
@@ -3581,8 +3581,9 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
- lock_kernel();
+ local_irq_save(flags);
if (clear & TIOCM_RTS)
e100_rts(info, 0);
@@ -3604,7 +3605,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
if (set & TIOCM_CD)
e100_cd_out(info, 1);
- unlock_kernel();
+ local_irq_restore(flags);
return 0;
}
@@ -3613,8 +3614,10 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned int result;
+ unsigned long flags;
+
+ local_irq_save(flags);
- lock_kernel();
result =
(!E100_RTS_GET(info) ? TIOCM_RTS : 0)
| (!E100_DTR_GET(info) ? TIOCM_DTR : 0)
@@ -3623,7 +3626,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
| (!E100_CD_GET(info) ? TIOCM_CAR : 0)
| (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
- unlock_kernel();
+ local_irq_restore(flags);
#ifdef SERIAL_DEBUG_IO
printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n",
@@ -3702,10 +3705,6 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_iflag == old_termios->c_iflag)
- return;
-
change_speed(info);
/* Handle turning off CRTSCTS */
@@ -3808,10 +3807,8 @@ rs_close(struct tty_struct *tty, struct file * filp)
#endif
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ rs_flush_buffer(tty);
+ tty_ldisc_flush_buffer(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
@@ -3885,6 +3882,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
* R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
*/
+ lock_kernel();
orig_jiffies = jiffies;
while (info->xmit.head != info->xmit.tail || /* More in send queue */
(*info->ostatusadr & 0x007f) || /* more in FIFO */
@@ -3901,6 +3899,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
curr_time_usec - info->last_tx_active_usec;
}
set_current_state(TASK_RUNNING);
+ unlock_kernel();
}
/*
@@ -4520,7 +4519,7 @@ rs_init(void)
if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
- panic("%s: Failed to request irq8", __FUNCTION__);
+ panic("%s: Failed to request irq8", __func__);
#endif
#endif /* CONFIG_SVINTO_SIM */
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 168073f12ce..4f1af71e9a1 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -52,7 +52,7 @@ static unsigned int Submodule_slot;
#define DPRINT_CONFIG(_x...) ;
//#define DPRINT_CONFIG(_x...) printk _x
#define NOT_PROGRESS() ;
-//#define NOT_PROGRESS() printk("%s : fails %d\n", __FUNCTION__, __LINE__)
+//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__)
/* number of characters we want to transmit to the lower level at a time */
#define MAX_CHARS 256
@@ -445,7 +445,7 @@ static int inline port_init(struct ioc3_port *port)
sbbr_h = &idd->vma->sbbr_h;
ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n",
- __FUNCTION__, (void *)ring_pci_addr));
+ __func__, (void *)ring_pci_addr));
writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h);
writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l);
@@ -593,7 +593,7 @@ config_port(struct ioc3_port *port,
DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d "
"parodd %d\n",
- __FUNCTION__, ((struct uart_port *)port->ip_port)->line,
+ __func__, ((struct uart_port *)port->ip_port)->line,
baud, byte_size, stop_bits, parenb, parodd));
if (set_baud(port, baud))
@@ -871,14 +871,14 @@ static int ioc3_set_proto(struct ioc3_port *port, int proto)
default:
case PROTO_RS232:
/* Clear the appropriate GIO pin */
- DPRINT_CONFIG(("%s: rs232\n", __FUNCTION__));
+ DPRINT_CONFIG(("%s: rs232\n", __func__));
writel(0, (&port->ip_idd->vma->gppr[0]
+ hooks->rs422_select_pin));
break;
case PROTO_RS422:
/* Set the appropriate GIO pin */
- DPRINT_CONFIG(("%s: rs422\n", __FUNCTION__));
+ DPRINT_CONFIG(("%s: rs422\n", __func__));
writel(1, (&port->ip_idd->vma->gppr[0]
+ hooks->rs422_select_pin));
break;
@@ -988,7 +988,7 @@ ioc3_change_speed(struct uart_port *the_port,
}
baud = uart_get_baud_rate(the_port, new_termios, old_termios,
MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
- DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __FUNCTION__, baud,
+ DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud,
the_port->line));
if (!the_port->fifosize)
@@ -1026,7 +1026,7 @@ ioc3_change_speed(struct uart_port *the_port,
DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o "
"config_port(baud %d data %d stop %d penable %d "
" parity %d), notification 0x%x\n",
- __FUNCTION__, (void *)port, the_port->line, cflag, baud,
+ __func__, (void *)port, the_port->line, cflag, baud,
new_data, new_stop, new_parity_enable, new_parity,
the_port->ignore_status_mask));
@@ -1919,7 +1919,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
struct pci_dev *pdev = idd->pdev;
DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n",
- __FUNCTION__, pdev, (void *)card_ptr));
+ __func__, pdev, (void *)card_ptr));
if (!card_ptr)
return -ENODEV;
@@ -1933,7 +1933,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
port->ip_port = the_port;
DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n",
- __FUNCTION__, (void *)the_port, (void *)port,
+ __func__, (void *)the_port, (void *)port,
phys_port, ii));
/* membase, iobase and mapbase just need to be non-0 */
@@ -1950,7 +1950,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
if (uart_add_one_port(&ioc3_uart, the_port) < 0) {
printk(KERN_WARNING
"%s: unable to add port %d bus %d\n",
- __FUNCTION__, the_port->line, pdev->bus->number);
+ __func__, the_port->line, pdev->bus->number);
} else {
DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n",
the_port->line, the_port->irq, pdev->bus->number));
@@ -2017,7 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
struct ioc3_port *ports[PORTS_PER_CARD];
int phys_port;
- DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, is, idd));
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd));
card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL);
if (!card_ptr) {
@@ -2067,7 +2067,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p "
"ip_uart_regs 0x%p\n",
- __FUNCTION__,
+ __func__,
(void *)port->ip_serial_regs,
(void *)port->ip_uart_regs));
@@ -2082,7 +2082,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p "
"ip_dma_ringbuf 0x%p, ip_inring 0x%p "
"ip_outring 0x%p\n",
- __FUNCTION__,
+ __func__,
(void *)port->ip_cpu_ringbuf,
(void *)port->ip_dma_ringbuf,
(void *)port->ip_inring,
@@ -2094,7 +2094,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p "
"ip_uart_regs 0x%p\n",
- __FUNCTION__,
+ __func__,
(void *)port->ip_serial_regs,
(void *)port->ip_uart_regs));
@@ -2108,7 +2108,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p "
"ip_dma_ringbuf 0x%p, ip_inring 0x%p "
"ip_outring 0x%p\n",
- __FUNCTION__,
+ __func__,
(void *)port->ip_cpu_ringbuf,
(void *)port->ip_dma_ringbuf,
(void *)port->ip_inring,
@@ -2116,7 +2116,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
}
DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p",
- __FUNCTION__,
+ __func__,
phys_port, (void *)port, (void *)card_ptr));
DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
(void *)port->ip_serial_regs,
@@ -2127,7 +2127,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p "
"outring 0x%p\n",
- __FUNCTION__,
+ __func__,
phys_port, (void *)port,
(void *)port->ip_inring,
(void *)port->ip_outring));
@@ -2170,7 +2170,7 @@ static int __devinit ioc3uart_init(void)
if ((ret = uart_register_driver(&ioc3_uart)) < 0) {
printk(KERN_WARNING
"%s: Couldn't register IOC3 uart serial driver\n",
- __FUNCTION__);
+ __func__);
return ret;
}
ret = ioc3_register_submodule(&ioc3uart_submodule);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 0c179384fb0..49b8a82b7b9 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -889,7 +889,7 @@ static int inline port_init(struct ioc4_port *port)
ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
- __FUNCTION__, ring_pci_addr));
+ __func__, ring_pci_addr));
writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
@@ -1028,7 +1028,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg)
spin_lock_irqsave(&soft->is_ir_lock, flag);
printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
"other_ir 0x%x other_ies 0x%x mask 0x%x\n",
- __FUNCTION__, __LINE__,
+ __func__, __LINE__,
(void *)mem, readl(&mem->sio_ir.raw),
readl(&mem->sio_ies.raw),
readl(&mem->other_ir.raw),
@@ -1155,14 +1155,14 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
(TOTAL_RING_BUF_SIZE - 1)) == 0));
DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
"ip_dma_ringbuf 0x%p\n",
- __FUNCTION__,
+ __func__,
(void *)port->ip_cpu_ringbuf,
(void *)port->ip_dma_ringbuf));
port->ip_inring = RING(port, RX_0_OR_2);
port->ip_outring = RING(port, TX_0_OR_2);
}
DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
- __FUNCTION__,
+ __func__,
port_number, (void *)port, (void *)control));
DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
(void *)port->ip_serial_regs,
@@ -1173,7 +1173,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
"outring 0x%p\n",
- __FUNCTION__,
+ __func__,
port_number, (void *)port,
(void *)port->ip_inring,
(void *)port->ip_outring));
@@ -1317,7 +1317,7 @@ config_port(struct ioc4_port *port,
int spiniter = 0;
DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
- __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd));
+ __func__, baud, byte_size, stop_bits, parenb, parodd));
if (set_baud(port, baud))
return 1;
@@ -1725,7 +1725,7 @@ ioc4_change_speed(struct uart_port *the_port,
}
baud = uart_get_baud_rate(the_port, new_termios, old_termios,
MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
- DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud));
+ DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud));
/* default is 9600 */
if (!baud)
@@ -1765,7 +1765,7 @@ ioc4_change_speed(struct uart_port *the_port,
DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
"config_port(baud %d data %d stop %d p enable %d parity %d),"
" notification 0x%x\n",
- __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop,
+ __func__, (void *)port, cflag, baud, new_data, new_stop,
new_parity_enable, new_parity, the_port->ignore_status_mask));
if ((config_port(port, baud, /* baud */
@@ -2715,7 +2715,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
- __FUNCTION__, pdev, (void *)control));
+ __func__, pdev, (void *)control));
if (!control)
return -ENODEV;
@@ -2734,7 +2734,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
port->ip_all_ports[port_type_idx] = the_port;
DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
- __FUNCTION__, (void *)the_port,
+ __func__, (void *)the_port,
(void *)port,
port_type == PROTO_RS232 ? "rs232" : "rs422"));
@@ -2752,7 +2752,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type)
if (uart_add_one_port(u_driver, the_port) < 0) {
printk(KERN_WARNING
"%s: unable to add port %d bus %d\n",
- __FUNCTION__, the_port->line, pdev->bus->number);
+ __func__, the_port->line, pdev->bus->number);
} else {
DPRINT_CONFIG(
("IOC4 serial port %d irq = %d, bus %d\n",
@@ -2777,7 +2777,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
int ret = 0;
- DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev,
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev,
idd->idd_pci_id));
/* PCI-RT does not bring out serial connections.
@@ -2806,7 +2806,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
goto out2;
}
DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
- __FUNCTION__, (void *)idd->idd_misc_regs,
+ __func__, (void *)idd->idd_misc_regs,
(void *)serial));
/* Get memory for the new card */
@@ -2858,7 +2858,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
} else {
printk(KERN_WARNING
"%s : request_irq fails for IRQ 0x%x\n ",
- __FUNCTION__, idd->idd_pdev->irq);
+ __func__, idd->idd_pdev->irq);
}
ret = ioc4_attach_local(idd);
if (ret)
@@ -2911,13 +2911,13 @@ int ioc4_serial_init(void)
if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) {
printk(KERN_WARNING
"%s: Couldn't register rs232 IOC4 serial driver\n",
- __FUNCTION__);
+ __func__);
return ret;
}
if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
printk(KERN_WARNING
"%s: Couldn't register rs422 IOC4 serial driver\n",
- __FUNCTION__);
+ __func__);
return ret;
}
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index 9cf03327386..eadc1ab6bbc 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -96,12 +96,14 @@ static void cleanup_kgdboc(void)
static int kgdboc_get_char(void)
{
- return kgdb_tty_driver->poll_get_char(kgdb_tty_driver, kgdb_tty_line);
+ return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver,
+ kgdb_tty_line);
}
static void kgdboc_put_char(u8 chr)
{
- kgdb_tty_driver->poll_put_char(kgdb_tty_driver, kgdb_tty_line, chr);
+ kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver,
+ kgdb_tty_line, chr);
}
static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index ddd3aa50d4a..43af40d59b8 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -1072,18 +1072,6 @@ static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
tty_wait_until_sent(tty, 0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
return 0;
- case TIOCGSOFTCAR:
- error = put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long *) arg);
- if (error)
- return error;
- return 0;
- case TIOCSSOFTCAR:
- get_user(arg, (unsigned long *) arg);
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
case TIOCGSERIAL:
if (access_ok(VERIFY_WRITE, (void *) arg,
sizeof(struct serial_struct)))
@@ -1222,8 +1210,7 @@ static void mcfrs_close(struct tty_struct *tty, struct file * filp)
} else
#endif
shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ mcfrs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
@@ -1276,6 +1263,8 @@ mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
+ lock_kernel();
+
fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
char_time = fifo_time / 5;
if (char_time == 0)
@@ -1312,6 +1301,7 @@ mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
+ unlock_kernel();
#else
/*
* For the other coldfire models, assume all data has been sent
@@ -1907,7 +1897,7 @@ static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
* This is used for console output.
*/
-void mcfrs_put_char(char ch)
+int mcfrs_put_char(char ch)
{
volatile unsigned char *uartp;
unsigned long flags;
@@ -1931,7 +1921,7 @@ void mcfrs_put_char(char ch)
mcfrs_init_console(); /* try and get it back */
local_irq_restore(flags);
- return;
+ return 1;
}
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 3123ffeac8a..81ac9bb4f39 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -287,6 +287,7 @@ static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned int val;
+ /* FIXME: Locking needed ? */
if (mctrl & TIOCM_RTS) {
val = readl(port->membase + UART_RTS_CR);
writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR);
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 4ffa2585429..2b6a013639e 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1022,6 +1022,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
struct uart_port *port = &ourport->port;
struct s3c2410_uartcfg *cfg;
struct resource *res;
+ int ret;
dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
@@ -1064,9 +1065,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
port->mapbase = res->start;
port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
- port->irq = platform_get_irq(platdev, 0);
- if (port->irq < 0)
+ ret = platform_get_irq(platdev, 0);
+ if (ret < 0)
port->irq = 0;
+ else
+ port->irq = ret;
ourport->clk = clk_get(&platdev->dev, "uart");
@@ -1093,13 +1096,13 @@ static int s3c24xx_serial_probe(struct platform_device *dev,
ourport = &s3c24xx_serial_ports[probe_index];
probe_index++;
- dbg("%s: initialising port %p...\n", __FUNCTION__, ourport);
+ dbg("%s: initialising port %p...\n", __func__, ourport);
ret = s3c24xx_serial_init_port(ourport, info, dev);
if (ret < 0)
goto probe_err;
- dbg("%s: adding port\n", __FUNCTION__);
+ dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
platform_set_drvdata(dev, &ourport->port);
@@ -1584,7 +1587,7 @@ static int s3c2412_serial_resetport(struct uart_port *port,
unsigned long ucon = rd_regl(port, S3C2410_UCON);
dbg("%s: port=%p (%08lx), cfg=%p\n",
- __FUNCTION__, port, port->mapbase, cfg);
+ __func__, port, port->mapbase, cfg);
/* ensure we don't change the clock settings... */
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 67b2338913c..62b38582f5e 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -655,7 +655,7 @@ void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
void __init sa1100_register_uart(int idx, int port)
{
if (idx >= NR_PORTS) {
- printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx);
+ printk(KERN_ERR "%s: bad index number %d\n", __func__, idx);
return;
}
@@ -682,7 +682,7 @@ void __init sa1100_register_uart(int idx, int port)
break;
default:
- printk(KERN_ERR "%s: bad port number %d\n", __FUNCTION__, port);
+ printk(KERN_ERR "%s: bad port number %d\n", __func__, port);
}
}
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 977ce820ce3..1e2b9d826f6 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -422,6 +422,7 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
EXPORT_SYMBOL(uart_get_divisor);
+/* FIXME: Consistent locking policy */
static void
uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
@@ -454,27 +455,30 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
port->ops->set_termios(port, termios, old_termios);
}
-static inline void
+static inline int
__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
{
unsigned long flags;
+ int ret = 0;
if (!circ->buf)
- return;
+ return 0;
spin_lock_irqsave(&port->lock, flags);
if (uart_circ_chars_free(circ) != 0) {
circ->buf[circ->head] = c;
circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
+ ret = 1;
}
spin_unlock_irqrestore(&port->lock, flags);
+ return ret;
}
-static void uart_put_char(struct tty_struct *tty, unsigned char ch)
+static int uart_put_char(struct tty_struct *tty, unsigned char ch)
{
struct uart_state *state = tty->driver_data;
- __uart_put_char(state->port, &state->info->xmit, ch);
+ return __uart_put_char(state->port, &state->info->xmit, ch);
}
static void uart_flush_chars(struct tty_struct *tty)
@@ -528,15 +532,25 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
static int uart_write_room(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ unsigned long flags;
+ int ret;
- return uart_circ_chars_free(&state->info->xmit);
+ spin_lock_irqsave(&state->port->lock, flags);
+ ret = uart_circ_chars_free(&state->info->xmit);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ return ret;
}
static int uart_chars_in_buffer(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ unsigned long flags;
+ int ret;
- return uart_circ_chars_pending(&state->info->xmit);
+ spin_lock_irqsave(&state->port->lock, flags);
+ ret = uart_circ_chars_pending(&state->info->xmit);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ return ret;
}
static void uart_flush_buffer(struct tty_struct *tty)
@@ -618,6 +632,11 @@ static int uart_get_info(struct uart_state *state,
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
+
+ /* Ensure the state we copy is consistent and no hardware changes
+ occur as we go */
+ mutex_lock(&state->mutex);
+
tmp.type = port->type;
tmp.line = port->line;
tmp.port = port->iobase;
@@ -637,6 +656,8 @@ static int uart_get_info(struct uart_state *state,
tmp.iomem_reg_shift = port->regshift;
tmp.iomem_base = (void *)(unsigned long)port->mapbase;
+ mutex_unlock(&state->mutex);
+
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -914,8 +935,6 @@ static void uart_break_ctl(struct tty_struct *tty, int break_state)
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->port;
- BUG_ON(!kernel_locked());
-
mutex_lock(&state->mutex);
if (port->type != PORT_UNKNOWN)
@@ -1059,7 +1078,7 @@ static int uart_get_count(struct uart_state *state,
}
/*
- * Called via sys_ioctl under the BKL. We can use spin_lock_irq() here.
+ * Called via sys_ioctl. We can use spin_lock_irq() here.
*/
static int
uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
@@ -1069,7 +1088,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
void __user *uarg = (void __user *)arg;
int ret = -ENOIOCTLCMD;
- BUG_ON(!kernel_locked());
/*
* These ioctls don't rely on the hardware to be present.
@@ -1140,9 +1158,9 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
break;
}
}
- out_up:
+out_up:
mutex_unlock(&state->mutex);
- out:
+out:
return ret;
}
@@ -1153,7 +1171,6 @@ static void uart_set_termios(struct tty_struct *tty,
unsigned long flags;
unsigned int cflag = tty->termios->c_cflag;
- BUG_ON(!kernel_locked());
/*
* These are the bits that are used to setup various
@@ -1165,8 +1182,9 @@ static void uart_set_termios(struct tty_struct *tty,
if ((cflag ^ old_termios->c_cflag) == 0 &&
tty->termios->c_ospeed == old_termios->c_ospeed &&
tty->termios->c_ispeed == old_termios->c_ispeed &&
- RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
+ RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) {
return;
+ }
uart_change_speed(state, old_termios);
@@ -1200,7 +1218,6 @@ static void uart_set_termios(struct tty_struct *tty,
}
spin_unlock_irqrestore(&state->port->lock, flags);
}
-
#if 0
/*
* No need to wake up processes in open wait, since they
@@ -1316,11 +1333,11 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
struct uart_port *port = state->port;
unsigned long char_time, expire;
- BUG_ON(!kernel_locked());
-
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
+ lock_kernel();
+
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1366,6 +1383,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
+ unlock_kernel();
}
/*
@@ -2079,7 +2097,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
int ret;
uart_change_pm(state, 0);
+ spin_lock_irq(&port->lock);
ops->set_mctrl(port, 0);
+ spin_unlock_irq(&port->lock);
ret = ops->startup(port);
if (ret == 0) {
uart_change_speed(state, NULL);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index c2ea5d4df44..96910618771 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -855,7 +855,7 @@ static int sci_notifier(struct notifier_block *self,
printk(KERN_INFO "%s: got a postchange notification "
"for cpu %d (old %d, new %d)\n",
- __FUNCTION__, freqs->cpu, freqs->old, freqs->new);
+ __func__, freqs->cpu, freqs->old, freqs->new);
}
return NOTIFY_OK;
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 41fc6126444..019da2e05f0 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -839,7 +839,7 @@ static int __init sn_sal_module_init(void)
if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) {
/* error - not sure what I'd do - so I'll do nothing */
- printk(KERN_ERR "%s: unable to add port\n", __FUNCTION__);
+ printk(KERN_ERR "%s: unable to add port\n", __func__);
}
/* when this driver is compiled in, the console initialization
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index b565d5a3749..b51c24245be 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -584,7 +584,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
const unsigned int *id;
int irq, rc;
- dev_dbg(&op->dev, "%s(%p, %p)\n", __FUNCTION__, op, match);
+ dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match);
rc = of_address_to_resource(op->node, 0, &res);
if (rc) {
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 5e4310ccd59..01917c433f1 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -215,7 +215,7 @@ static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);
/* something nasty happened */
- printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr);
+ printk(KERN_ERR "%s: addr=%p\n", __func__, addr);
BUG();
return 0;
}
@@ -234,7 +234,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
/* something nasty happened */
- printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr);
+ printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
BUG();
return NULL;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-09 23:20:46 +0000