diff options
Diffstat (limited to 'drivers/staging/benet/fwcmd_common_bmap.h')
-rw-r--r-- | drivers/staging/benet/fwcmd_common_bmap.h | 717 |
1 files changed, 717 insertions, 0 deletions
diff --git a/drivers/staging/benet/fwcmd_common_bmap.h b/drivers/staging/benet/fwcmd_common_bmap.h new file mode 100644 index 00000000000..a007cf27650 --- /dev/null +++ b/drivers/staging/benet/fwcmd_common_bmap.h @@ -0,0 +1,717 @@ +/* + * Copyright (C) 2005 - 2008 ServerEngines + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. The full GNU General + * Public License is included in this distribution in the file called COPYING. + * + * Contact Information: + * linux-drivers@serverengines.com + * + * ServerEngines + * 209 N. Fair Oaks Ave + * Sunnyvale, CA 94085 + */ +/* + * Autogenerated by srcgen version: 0127 + */ +#ifndef __fwcmd_common_bmap_h__ +#define __fwcmd_common_bmap_h__ +#include "fwcmd_types_bmap.h" +#include "fwcmd_hdr_bmap.h" + +#if defined(__BIG_ENDIAN) + /* Physical Address. */ +struct PHYS_ADDR { + union { + struct { + u32 lo; /* DWORD 0 */ + u32 hi; /* DWORD 1 */ + } __packed; /* unnamed struct */ + u32 dw[2]; /* dword union */ + }; /* unnamed union */ +} __packed ; + + +#else + /* Physical Address. */ +struct PHYS_ADDR { + union { + struct { + u32 lo; /* DWORD 0 */ + u32 hi; /* DWORD 1 */ + } __packed; /* unnamed struct */ + u32 dw[2]; /* dword union */ + }; /* unnamed union */ +} __packed ; + +struct BE_LINK_STATUS { + u8 mac0_duplex; + u8 mac0_speed; + u8 mac1_duplex; + u8 mac1_speed; + u8 mgmt_mac_duplex; + u8 mgmt_mac_speed; + u8 active_port; + u8 rsvd0; + u8 mac0_fault; + u8 mac1_fault; + u16 rsvd1; +} __packed; +#endif + +struct FWCMD_COMMON_ANON_170_REQUEST { + u32 rsvd0; +} __packed; + +union LINK_STATUS_QUERY_PARAMS { + struct BE_LINK_STATUS response; + struct FWCMD_COMMON_ANON_170_REQUEST request; +} __packed; + +/* + * Queries the the link status for all ports. The valid values below + * DO NOT indicate that a particular duplex or speed is supported by + * BladeEngine. These enumerations simply list all possible duplexes + * and speeds for any port. Consult BladeEngine product documentation + * for the supported parameters. + */ +struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY { + union FWCMD_HEADER header; + union LINK_STATUS_QUERY_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_171_REQUEST { + u8 type; + u8 port; + u8 mac1; + u8 permanent; +} __packed; + +struct FWCMD_COMMON_ANON_172_RESPONSE { + struct MAC_ADDRESS_FORMAT mac; +} __packed; + +union NTWK_MAC_QUERY_PARAMS { + struct FWCMD_COMMON_ANON_171_REQUEST request; + struct FWCMD_COMMON_ANON_172_RESPONSE response; +} __packed; + +/* Queries one MAC address. */ +struct FWCMD_COMMON_NTWK_MAC_QUERY { + union FWCMD_HEADER header; + union NTWK_MAC_QUERY_PARAMS params; +} __packed; + +struct MAC_SET_PARAMS_IN { + u8 type; + u8 port; + u8 mac1; + u8 invalidate; + struct MAC_ADDRESS_FORMAT mac; +} __packed; + +struct MAC_SET_PARAMS_OUT { + u32 rsvd0; +} __packed; + +union MAC_SET_PARAMS { + struct MAC_SET_PARAMS_IN request; + struct MAC_SET_PARAMS_OUT response; +} __packed; + +/* Sets a MAC address. */ +struct FWCMD_COMMON_NTWK_MAC_SET { + union FWCMD_HEADER header; + union MAC_SET_PARAMS params; +} __packed; + +/* MAC address list. */ +struct NTWK_MULTICAST_MAC_LIST { + u8 byte[6]; +} __packed; + +struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD { + u16 num_mac; + u8 promiscuous; + u8 rsvd0; + struct NTWK_MULTICAST_MAC_LIST mac[32]; +} __packed; + +struct FWCMD_COMMON_ANON_174_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_173_PARAMS { + struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD request; + struct FWCMD_COMMON_ANON_174_RESPONSE response; +} __packed; + +/* + * Sets multicast address hash. The MPU will merge the MAC address lists + * from all clients, including the networking and storage functions. + * This command may fail if the final merged list of MAC addresses exceeds + * 32 entries. + */ +struct FWCMD_COMMON_NTWK_MULTICAST_SET { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_173_PARAMS params; +} __packed; + +struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD { + u16 num_vlan; + u8 promiscuous; + u8 rsvd0; + u16 vlan_tag[32]; +} __packed; + +struct FWCMD_COMMON_ANON_176_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_175_PARAMS { + struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD request; + struct FWCMD_COMMON_ANON_176_RESPONSE response; +} __packed; + +/* + * Sets VLAN tag filter. The MPU will merge the VLAN tag list from all + * clients, including the networking and storage functions. This command + * may fail if the final vlan_tag array (from all functions) is longer + * than 32 entries. + */ +struct FWCMD_COMMON_NTWK_VLAN_CONFIG { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_175_PARAMS params; +} __packed; + +struct RING_DESTROY_REQUEST { + u16 ring_type; + u16 id; + u8 bypass_flush; + u8 rsvd0; + u16 rsvd1; +} __packed; + +struct FWCMD_COMMON_ANON_190_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_189_PARAMS { + struct RING_DESTROY_REQUEST request; + struct FWCMD_COMMON_ANON_190_RESPONSE response; +} __packed; +/* + * Command for destroying any ring. The connection(s) using the ring should + * be quiesced before destroying the ring. + */ +struct FWCMD_COMMON_RING_DESTROY { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_189_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_192_REQUEST { + u16 num_pages; + u16 rsvd0; + struct CQ_CONTEXT_AMAP context; + struct PHYS_ADDR pages[4]; +} __packed ; + +struct FWCMD_COMMON_ANON_193_RESPONSE { + u16 cq_id; +} __packed ; + +union FWCMD_COMMON_ANON_191_PARAMS { + struct FWCMD_COMMON_ANON_192_REQUEST request; + struct FWCMD_COMMON_ANON_193_RESPONSE response; +} __packed ; + +/* + * Command for creating a completion queue. A Completion Queue must span + * at least 1 page and at most 4 pages. Each completion queue entry + * is 16 bytes regardless of CQ entry format. Thus the ring must be + * at least 256 entries deep (corresponding to 1 page) and can be at + * most 1024 entries deep (corresponding to 4 pages). The number of + * pages posted must contain the CQ ring size as encoded in the context. + * + */ +struct FWCMD_COMMON_CQ_CREATE { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_191_PARAMS params; +} __packed ; + +struct FWCMD_COMMON_ANON_198_REQUEST { + u16 num_pages; + u16 rsvd0; + struct EQ_CONTEXT_AMAP context; + struct PHYS_ADDR pages[8]; +} __packed ; + +struct FWCMD_COMMON_ANON_199_RESPONSE { + u16 eq_id; +} __packed ; + +union FWCMD_COMMON_ANON_197_PARAMS { + struct FWCMD_COMMON_ANON_198_REQUEST request; + struct FWCMD_COMMON_ANON_199_RESPONSE response; +} __packed ; + +/* + * Command for creating a event queue. An Event Queue must span at least + * 1 page and at most 8 pages. The number of pages posted must contain + * the EQ ring. The ring is defined by the size of the EQ entries (encoded + * in the context) and the number of EQ entries (also encoded in the + * context). + */ +struct FWCMD_COMMON_EQ_CREATE { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_197_PARAMS params; +} __packed ; + +struct FWCMD_COMMON_ANON_201_REQUEST { + u16 cq_id; + u16 bcmc_cq_id; + u16 num_pages; + u16 rsvd0; + struct PHYS_ADDR pages[2]; +} __packed; + +struct FWCMD_COMMON_ANON_202_RESPONSE { + u16 id; +} __packed; + +union FWCMD_COMMON_ANON_200_PARAMS { + struct FWCMD_COMMON_ANON_201_REQUEST request; + struct FWCMD_COMMON_ANON_202_RESPONSE response; +} __packed; + +/* + * Command for creating Ethernet receive ring. An ERX ring contains ETH_RX_D + * entries (8 bytes each). An ERX ring must be 1024 entries deep + * (corresponding to 2 pages). + */ +struct FWCMD_COMMON_ETH_RX_CREATE { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_200_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_204_REQUEST { + u16 num_pages; + u8 ulp_num; + u8 type; + struct ETX_CONTEXT_AMAP context; + struct PHYS_ADDR pages[8]; +} __packed ; + +struct FWCMD_COMMON_ANON_205_RESPONSE { + u16 cid; + u8 ulp_num; + u8 rsvd0; +} __packed ; + +union FWCMD_COMMON_ANON_203_PARAMS { + struct FWCMD_COMMON_ANON_204_REQUEST request; + struct FWCMD_COMMON_ANON_205_RESPONSE response; +} __packed ; + +/* + * Command for creating an Ethernet transmit ring. An ETX ring contains + * ETH_WRB entries (16 bytes each). An ETX ring must be at least 256 + * entries deep (corresponding to 1 page) and at most 2k entries deep + * (corresponding to 8 pages). + */ +struct FWCMD_COMMON_ETH_TX_CREATE { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_203_PARAMS params; +} __packed ; + +struct FWCMD_COMMON_ANON_222_REQUEST { + u16 num_pages; + u16 rsvd0; + struct MCC_RING_CONTEXT_AMAP context; + struct PHYS_ADDR pages[8]; +} __packed ; + +struct FWCMD_COMMON_ANON_223_RESPONSE { + u16 id; +} __packed ; + +union FWCMD_COMMON_ANON_221_PARAMS { + struct FWCMD_COMMON_ANON_222_REQUEST request; + struct FWCMD_COMMON_ANON_223_RESPONSE response; +} __packed ; + +/* + * Command for creating the MCC ring. An MCC ring must be at least 16 + * entries deep (corresponding to 1 page) and at most 128 entries deep + * (corresponding to 8 pages). + */ +struct FWCMD_COMMON_MCC_CREATE { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_221_PARAMS params; +} __packed ; + +struct GET_QOS_IN { + u32 qos_params_rsvd; +} __packed; + +struct GET_QOS_OUT { + u32 max_bits_per_second_NIC; + u32 max_packets_per_second_NIC; + u32 max_ios_per_second_iSCSI; + u32 max_bytes_per_second_iSCSI; + u16 domain_VLAN_tag; + u16 fabric_domain_ID; + u32 qos_params_oem[4]; +} __packed; + +union GET_QOS_PARAMS { + struct GET_QOS_IN request; + struct GET_QOS_OUT response; +} __packed; + +/* QOS/Bandwidth settings per domain. Applicable only in VMs. */ +struct FWCMD_COMMON_GET_QOS { + union FWCMD_HEADER header; + union GET_QOS_PARAMS params; +} __packed; + +struct SET_QOS_IN { + u32 valid_flags; + u32 max_bits_per_second_NIC; + u32 max_packets_per_second_NIC; + u32 max_ios_per_second_iSCSI; + u32 max_bytes_per_second_iSCSI; + u16 domain_VLAN_tag; + u16 fabric_domain_ID; + u32 qos_params_oem[4]; +} __packed; + +struct SET_QOS_OUT { + u32 qos_params_rsvd; +} __packed; + +union SET_QOS_PARAMS { + struct SET_QOS_IN request; + struct SET_QOS_OUT response; +} __packed; + +/* QOS/Bandwidth settings per domain. Applicable only in VMs. */ +struct FWCMD_COMMON_SET_QOS { + union FWCMD_HEADER header; + union SET_QOS_PARAMS params; +} __packed; + +struct SET_FRAME_SIZE_IN { + u32 max_tx_frame_size; + u32 max_rx_frame_size; +} __packed; + +struct SET_FRAME_SIZE_OUT { + u32 chip_max_tx_frame_size; + u32 chip_max_rx_frame_size; +} __packed; + +union SET_FRAME_SIZE_PARAMS { + struct SET_FRAME_SIZE_IN request; + struct SET_FRAME_SIZE_OUT response; +} __packed; + +/* Set frame size command. Only host domain may issue this command. */ +struct FWCMD_COMMON_SET_FRAME_SIZE { + union FWCMD_HEADER header; + union SET_FRAME_SIZE_PARAMS params; +} __packed; + +struct FORCE_FAILOVER_IN { + u32 move_to_port; + u32 failover_config; +} __packed; + +struct FWCMD_COMMON_ANON_231_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_230_PARAMS { + struct FORCE_FAILOVER_IN request; + struct FWCMD_COMMON_ANON_231_RESPONSE response; +} __packed; + +/* + * Use this command to control failover in BladeEngine. It may be used + * to failback to a restored port or to forcibly move traffic from + * one port to another. It may also be used to enable or disable the + * automatic failover feature. This command can only be issued by domain + * 0. + */ +struct FWCMD_COMMON_FORCE_FAILOVER { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_230_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_240_REQUEST { + u64 context; +} __packed; + +struct FWCMD_COMMON_ANON_241_RESPONSE { + u64 context; +} __packed; + +union FWCMD_COMMON_ANON_239_PARAMS { + struct FWCMD_COMMON_ANON_240_REQUEST request; + struct FWCMD_COMMON_ANON_241_RESPONSE response; +} __packed; + +/* + * This command can be used by clients as a no-operation request. Typical + * uses for drivers are as a heartbeat mechanism, or deferred processing + * catalyst. The ARM will always complete this command with a good completion. + * The 64-bit parameter is not touched by the ARM processor. + */ +struct FWCMD_COMMON_NOP { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_239_PARAMS params; +} __packed; + +struct NTWK_RX_FILTER_SETTINGS { + u8 promiscuous; + u8 ip_cksum; + u8 tcp_cksum; + u8 udp_cksum; + u8 pass_err; + u8 pass_ckerr; + u8 strip_crc; + u8 mcast_en; + u8 bcast_en; + u8 mcast_promiscuous_en; + u8 unicast_en; + u8 vlan_promiscuous; +} __packed; + +union FWCMD_COMMON_ANON_242_PARAMS { + struct NTWK_RX_FILTER_SETTINGS request; + struct NTWK_RX_FILTER_SETTINGS response; +} __packed; + +/* + * This command is used to modify the ethernet receive filter configuration. + * Only domain 0 network function drivers may issue this command. The + * applied configuration is returned in the response payload. Note: + * Some receive packet filter settings are global on BladeEngine and + * can affect both the storage and network function clients that the + * BladeEngine hardware and firmware serve. Additionaly, depending + * on the revision of BladeEngine, some ethernet receive filter settings + * are dependent on others. If a dependency exists between settings + * for the BladeEngine revision, and the command request settings do + * not meet the dependency requirement, the invalid settings will not + * be applied despite the comand succeeding. For example: a driver may + * request to enable broadcast packets, but not enable multicast packets. + * On early revisions of BladeEngine, there may be no distinction between + * broadcast and multicast filters, so broadcast could not be enabled + * without enabling multicast. In this scenario, the comand would still + * succeed, but the response payload would indicate the previously + * configured broadcast and multicast setting. + */ +struct FWCMD_COMMON_NTWK_RX_FILTER { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_242_PARAMS params; +} __packed; + + +struct FWCMD_COMMON_ANON_244_REQUEST { + u32 rsvd0; +} __packed; + +struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD { + u8 firmware_version_string[32]; + u8 fw_on_flash_version_string[32]; +} __packed; + +union FWCMD_COMMON_ANON_243_PARAMS { + struct FWCMD_COMMON_ANON_244_REQUEST request; + struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD response; +} __packed; + +/* This comand retrieves the firmware version. */ +struct FWCMD_COMMON_GET_FW_VERSION { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_243_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_246_REQUEST { + u16 tx_flow_control; + u16 rx_flow_control; +} __packed; + +struct FWCMD_COMMON_ANON_247_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_245_PARAMS { + struct FWCMD_COMMON_ANON_246_REQUEST request; + struct FWCMD_COMMON_ANON_247_RESPONSE response; +} __packed; + +/* + * This comand is used to program BladeEngine flow control behavior. + * Only the host networking driver is allowed to use this comand. + */ +struct FWCMD_COMMON_SET_FLOW_CONTROL { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_245_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_249_REQUEST { + u32 rsvd0; +} __packed; + +struct FWCMD_COMMON_ANON_250_RESPONSE { + u16 tx_flow_control; + u16 rx_flow_control; +} __packed; + +union FWCMD_COMMON_ANON_248_PARAMS { + struct FWCMD_COMMON_ANON_249_REQUEST request; + struct FWCMD_COMMON_ANON_250_RESPONSE response; +} __packed; + +/* This comand is used to read BladeEngine flow control settings. */ +struct FWCMD_COMMON_GET_FLOW_CONTROL { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_248_PARAMS params; +} __packed; + +struct EQ_DELAY_PARAMS { + u32 eq_id; + u32 delay_in_microseconds; +} __packed; + +struct FWCMD_COMMON_ANON_257_REQUEST { + u32 num_eq; + u32 rsvd0; + struct EQ_DELAY_PARAMS delay[16]; +} __packed; + +struct FWCMD_COMMON_ANON_258_RESPONSE { + u32 delay_resolution_in_microseconds; + u32 delay_max_in_microseconds; +} __packed; + +union MODIFY_EQ_DELAY_PARAMS { + struct FWCMD_COMMON_ANON_257_REQUEST request; + struct FWCMD_COMMON_ANON_258_RESPONSE response; +} __packed; + +/* This comand changes the EQ delay for a given set of EQs. */ +struct FWCMD_COMMON_MODIFY_EQ_DELAY { + union FWCMD_HEADER header; + union MODIFY_EQ_DELAY_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_260_REQUEST { + u32 rsvd0; +} __packed; + +struct BE_FIRMWARE_CONFIG { + u16 be_config_number; + u16 asic_revision; + u32 nic_ulp_mask; + u32 tulp_mask; + u32 iscsi_ulp_mask; + u32 rdma_ulp_mask; + u32 rsvd0[4]; + u32 eth_tx_id_start; + u32 eth_tx_id_count; + u32 eth_rx_id_start; + u32 eth_rx_id_count; + u32 tpm_wrbq_id_start; + u32 tpm_wrbq_id_count; + u32 tpm_defq_id_start; + u32 tpm_defq_id_count; + u32 iscsi_wrbq_id_start; + u32 iscsi_wrbq_id_count; + u32 iscsi_defq_id_start; + u32 iscsi_defq_id_count; + u32 rdma_qp_id_start; + u32 rdma_qp_id_count; + u32 rsvd1[8]; +} __packed; + +union FWCMD_COMMON_ANON_259_PARAMS { + struct FWCMD_COMMON_ANON_260_REQUEST request; + struct BE_FIRMWARE_CONFIG response; +} __packed; + +/* + * This comand queries the current firmware configuration parameters. + * The static configuration type is defined by be_config_number. This + * differentiates different BladeEngine builds, such as iSCSI Initiator + * versus iSCSI Target. For a given static configuration, the Upper + * Layer Protocol (ULP) processors may be reconfigured to support different + * protocols. Each ULP processor supports one or more protocols. The + * masks indicate which processors are configured for each protocol. + * For a given static configuration, the number of TCP connections + * supported for each protocol may vary. The *_id_start and *_id_count + * variables define a linear range of IDs that are available for each + * supported protocol. The *_id_count may be used by the driver to allocate + * the appropriate number of connection resources. The *_id_start may + * be used to map the arbitrary range of IDs to a zero-based range + * of indices. + */ +struct FWCMD_COMMON_FIRMWARE_CONFIG { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_259_PARAMS params; +} __packed; + +struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS { + u32 emph_lev_sel_port0; + u32 emph_lev_sel_port1; + u8 xaui_vo_sel; + u8 xaui_state; + u16 rsvd0; + u32 xaui_eq_vector; +} __packed; + +struct FWCMD_COMMON_ANON_262_REQUEST { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_261_PARAMS { + struct FWCMD_COMMON_ANON_262_REQUEST request; + struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS response; +} __packed; + +/* + * This comand can be used to read XAUI equalization parameters. The + * ARM firmware applies default equalization parameters during initialization. + * These parameters may be customer-specific when derived from the + * SEEPROM. See SEEPROM_DATA for equalization specific fields. + */ +struct FWCMD_COMMON_GET_PORT_EQUALIZATION { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_261_PARAMS params; +} __packed; + +struct FWCMD_COMMON_ANON_264_RESPONSE { + u32 rsvd0; +} __packed; + +union FWCMD_COMMON_ANON_263_PARAMS { + struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS request; + struct FWCMD_COMMON_ANON_264_RESPONSE response; +} __packed; + +/* + * This comand can be used to set XAUI equalization parameters. The ARM + * firmware applies default equalization parameters during initialization. + * These parameters may be customer-specific when derived from the + * SEEPROM. See SEEPROM_DATA for equalization specific fields. + */ +struct FWCMD_COMMON_SET_PORT_EQUALIZATION { + union FWCMD_HEADER header; + union FWCMD_COMMON_ANON_263_PARAMS params; +} __packed; + +#endif /* __fwcmd_common_bmap_h__ */ |