diff options
Diffstat (limited to 'drivers/staging/et131x/et1310_jagcore.c')
-rw-r--r-- | drivers/staging/et131x/et1310_jagcore.c | 214 |
1 files changed, 0 insertions, 214 deletions
diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c deleted file mode 100644 index ff238ef9728..00000000000 --- a/drivers/staging/et131x/et1310_jagcore.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <asm/system.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/** - * ConfigGlobalRegs - Used to configure the global registers on the JAGCore - * @pAdpater: pointer to our adapter structure - */ -void ConfigGlobalRegs(struct et131x_adapter *etdev) -{ - struct _GLOBAL_t __iomem *pGbl = &etdev->regs->global; - - DBG_ENTER(et131x_dbginfo); - - if (etdev->RegistryPhyLoopbk == false) { - if (etdev->RegistryJumboPacket < 2048) { - /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word - * block of RAM that the driver can split between Tx - * and Rx as it desires. Our default is to split it - * 50/50: - */ - writel(0, &pGbl->rxq_start_addr); - writel(PARM_RX_MEM_END_DEF, &pGbl->rxq_end_addr); - writel(PARM_RX_MEM_END_DEF + 1, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - } else if (etdev->RegistryJumboPacket < 8192) { - /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(0, &pGbl->rxq_start_addr); - writel(INTERNAL_MEM_RX_OFFSET, &pGbl->rxq_end_addr); - writel(INTERNAL_MEM_RX_OFFSET + 1, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - } else { - /* 9216 is the only packet size greater than 8k that - * is available. The Tx buffer has to be big enough - * for one whole packet on the Tx side. We'll make - * the Tx 9408, and give the rest to Rx - */ - writel(0x0000, &pGbl->rxq_start_addr); - writel(0x01b3, &pGbl->rxq_end_addr); - writel(0x01b4, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1,&pGbl->txq_end_addr); - } - - /* Initialize the loopback register. Disable all loopbacks. */ - writel(0, &pGbl->loopback.value); - } else { - /* For PHY Line loopback, the memory is configured as if Tx - * and Rx both have all the memory. This is because the - * RxMAC will write data into the space, and the TxMAC will - * read it out. - */ - writel(0, &pGbl->rxq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr); - writel(0, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - - /* Initialize the loopback register (MAC loopback). */ - writel(1, &pGbl->loopback); - } - - /* MSI Register */ - writel(0, &pGbl->msi_config.value); - - /* By default, disable the watchdog timer. It will be enabled when - * a packet is queued. - */ - writel(0, &pGbl->watchdog_timer); - - DBG_LEAVE(et131x_dbginfo); -} - -/** - * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore - * @etdev: pointer to our adapter structure - */ -void ConfigMMCRegs(struct et131x_adapter *etdev) -{ - DBG_ENTER(et131x_dbginfo); - /* All we need to do is initialize the Memory Control Register */ - writel(ET_MMC_ENABLE, &etdev->regs->mmc.mmc_ctrl); - DBG_LEAVE(et131x_dbginfo); -} - -/** - * et131x_enable_interrupts - enable interrupt - * @adapter: et131x device - * - * Enable the appropriate interrupts on the ET131x according to our - * configuration - */ - -void et131x_enable_interrupts(struct et131x_adapter *adapter) -{ - u32 mask; - - /* Enable all global interrupts */ - if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both) - mask = INT_MASK_ENABLE; - else - mask = INT_MASK_ENABLE_NO_FLOW; - - if (adapter->DriverNoPhyAccess) - mask |= ET_INTR_PHY; - - adapter->CachedMaskValue = mask; - writel(mask, &adapter->regs->global.int_mask); -} - -/** - * et131x_disable_interrupts - interrupt disable - * @adapter: et131x device - * - * Block all interrupts from the et131x device at the device itself - */ - -void et131x_disable_interrupts(struct et131x_adapter *adapter) -{ - /* Disable all global interrupts */ - adapter->CachedMaskValue = INT_MASK_DISABLE; - writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); -} |