diff options
Diffstat (limited to 'drivers/staging/et131x/et131x_config.c')
| -rw-r--r-- | drivers/staging/et131x/et131x_config.c | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c deleted file mode 100644 index cde727d3180..00000000000 --- a/drivers/staging/et131x/et131x_config.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_config.c - Handles parsing of configuration data during - * initialization. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <asm/system.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" -#include "et131x_config.h" - -#include "et1310_tx.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/* Defines for Parameter Default/Min/Max vaules */ -#define PARM_SPEED_DUPLEX_MIN 0 -#define PARM_SPEED_DUPLEX_MAX 5 - -/* Module parameter for disabling NMI - * et131x_nmi_disable : - * Disable NMI (0-2) [0] - * 0 : - * 1 : - * 2 : - */ -static u32 et131x_nmi_disable; /* 0-2 */ -module_param(et131x_nmi_disable, uint, 0); -MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); - -/* Module parameter for manual speed setting - * Set Link speed and dublex manually (0-5) [0] - * 1 : 10Mb Half-Duplex - * 2 : 10Mb Full-Duplex - * 3 : 100Mb Half-Duplex - * 4 : 100Mb Full-Duplex - * 5 : 1000Mb Full-Duplex - * 0 : Auto Speed Auto Duplex // default - */ -static u32 et131x_speed_set; -module_param(et131x_speed_set, uint, 0); -MODULE_PARM_DESC(et131x_speed_set, - "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); - -/** - * et131x_config_parse - * @etdev: pointer to the private adapter struct - * - * Parses a configuration from some location (module parameters, for example) - * into the private adapter struct. This really has no sensible analogy in - * Linux as sysfs parameters are dynamic. Several things that were hee could - * go into sysfs, but other stuff like speed handling is part of the mii - * interfaces/ethtool. - */ -void et131x_config_parse(struct et131x_adapter *etdev) -{ - static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; - static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 }; - static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 }; - - DBG_ENTER(et131x_dbginfo); - - if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || - et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { - dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n"); - et131x_speed_set = 0; - } - else if (et131x_speed_set) - DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", - et131x_speed_set); - - etdev->SpeedDuplex = et131x_speed_set; - etdev->RegistryJumboPacket = 1514; /* 1514-9216 */ - - etdev->RegistryNMIDisable = et131x_nmi_disable; - - /* Set the MAC address to a default */ - memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN); - - /* Decode SpeedDuplex - * - * Set up as if we are auto negotiating always and then change if we - * go into force mode - * - * If we are the 10/100 device, and gigabit is somehow requested then - * knock it down to 100 full. - */ - if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST && - etdev->SpeedDuplex == 5) - etdev->SpeedDuplex = 4; - - etdev->AiForceSpeed = speed[etdev->SpeedDuplex]; - etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */ - - DBG_LEAVE(et131x_dbginfo); -} |