diff options
Diffstat (limited to 'drivers/staging/rtl8192e/r8190_rtl8256.c')
-rw-r--r-- | drivers/staging/rtl8192e/r8190_rtl8256.c | 1161 |
1 files changed, 1161 insertions, 0 deletions
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c new file mode 100644 index 00000000000..da628c52040 --- /dev/null +++ b/drivers/staging/rtl8192e/r8190_rtl8256.c @@ -0,0 +1,1161 @@ +/* + This is part of the rtl8192 driver + released under the GPL (See file COPYING for details). + + This files contains programming code for the rtl8256 + radio frontend. + + *Many* thanks to Realtek Corp. for their great support! + +*/ + +#include "r8192E.h" +#include "r8192E_hw.h" +#include "r819xE_phyreg.h" +#include "r819xE_phy.h" +#include "r8190_rtl8256.h" + +/*-------------------------------------------------------------------------- + * Overview: set RF band width (20M or 40M) + * Input: struct net_device* dev + * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M + * Output: NONE + * Return: NONE + * Note: 8226 support both 20M and 40 MHz + *---------------------------------------------------------------------------*/ +void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M +{ + u8 eRFPath; + struct r8192_priv *priv = ieee80211_priv(dev); + + //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) + { + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + continue; + + switch(Bandwidth) + { + case HT_CHANNEL_WIDTH_20: + if(priv->card_8192_version == VERSION_8190_BD || priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later! + { + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7); + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021); + + //cosa add for sd3's request 01/23/2008 + //rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab); + } + else + { + RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n"); + } + + break; + case HT_CHANNEL_WIDTH_20_40: + if(priv->card_8192_version == VERSION_8190_BD ||priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later! + { + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff); + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1); + + //cosa add for sd3's request 01/23/2008 + #if 0 + if(priv->chan == 3 || priv->chan == 9) //I need to set priv->chan whenever current channel changes + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b); + else + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab); + #endif + } + else + { + RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n"); + } + + + break; + default: + RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ); + break; + + } + } + return; +} +/*-------------------------------------------------------------------------- + * Overview: Interface to config 8256 + * Input: struct net_device* dev + * Output: NONE + * Return: NONE + *---------------------------------------------------------------------------*/ +RT_STATUS PHY_RF8256_Config(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + // Initialize general global value + // + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + // TODO: Extend RF_PATH_C and RF_PATH_D in the future + priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH; + // Config BB and RF + rtStatus = phy_RF8256_Config_ParaFile(dev); + + return rtStatus; +} +/*-------------------------------------------------------------------------- + * Overview: Interface to config 8256 + * Input: struct net_device* dev + * Output: NONE + * Return: NONE + *---------------------------------------------------------------------------*/ +RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) +{ + u32 u4RegValue = 0; + u8 eRFPath; + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + BB_REGISTER_DEFINITION_T *pPhyReg; + struct r8192_priv *priv = ieee80211_priv(dev); + u32 RegOffSetToBeCheck = 0x3; + u32 RegValueToBeCheck = 0x7f1; + u32 RF3_Final_Value = 0; + u8 ConstRetryTimes = 5, RetryTimes = 5; + u8 ret = 0; + //3//----------------------------------------------------------------- + //3// <2> Initialize RF + //3//----------------------------------------------------------------- + for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++) + { + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + continue; + + pPhyReg = &priv->PHYRegDef[eRFPath]; + + // Joseph test for shorten RF config + // pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord); + + /*----Store original RFENV control type----*/ + switch(eRFPath) + { + case RF90_PATH_A: + case RF90_PATH_C: + u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV); + break; + case RF90_PATH_B : + case RF90_PATH_D: + u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16); + break; + } + + /*----Set RF_ENV enable----*/ + rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); + + /*----Set RF_ENV output high----*/ + rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); + + /* Set bit number of Address and Data for RF register */ + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? + + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf); + + /*----Check RF block (for FPGA platform only)----*/ + // TODO: this function should be removed on ASIC , Emily 2007.2.2 + rtStatus = rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath); + if(rtStatus!= RT_STATUS_SUCCESS) + { + RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath); + goto phy_RF8256_Config_ParaFile_Fail; + } + + RetryTimes = ConstRetryTimes; + RF3_Final_Value = 0; + /*----Initialize RF fom connfiguration file----*/ + switch(eRFPath) + { + case RF90_PATH_A: + while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) + { + ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); + RetryTimes--; + } + break; + case RF90_PATH_B: + while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) + { + ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); + RetryTimes--; + } + break; + case RF90_PATH_C: + while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) + { + ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); + RetryTimes--; + } + break; + case RF90_PATH_D: + while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) + { + ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); + RetryTimes--; + } + break; + } + + /*----Restore RFENV control type----*/; + switch(eRFPath) + { + case RF90_PATH_A: + case RF90_PATH_C: + rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); + break; + case RF90_PATH_B : + case RF90_PATH_D: + rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); + break; + } + + if(ret){ + RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath); + goto phy_RF8256_Config_ParaFile_Fail; + } + + } + + RT_TRACE(COMP_PHY, "PHY Initialization Success\n") ; + return RT_STATUS_SUCCESS; + +phy_RF8256_Config_ParaFile_Fail: + RT_TRACE(COMP_ERR, "PHY Initialization failed\n") ; + return RT_STATUS_FAILURE; +} + + +void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel) +{ + u32 TxAGC=0; + struct r8192_priv *priv = ieee80211_priv(dev); +#ifdef RTL8190P + u8 byte0, byte1; + + TxAGC |= ((powerlevel<<8)|powerlevel); + TxAGC += priv->CCKTxPowerLevelOriginalOffset; + + if(priv->bDynamicTxLowPower == true //cosa 04282008 for cck long range + /*pMgntInfo->bScanInProgress == TRUE*/ ) //cosa 05/22/2008 for scan + { + if(priv->CustomerID == RT_CID_819x_Netcore) + TxAGC = 0x2222; + else + TxAGC += ((priv->CckPwEnl<<8)|priv->CckPwEnl); + } + + byte0 = (u8)(TxAGC & 0xff); + byte1 = (u8)((TxAGC & 0xff00)>>8); + if(byte0 > 0x24) + byte0 = 0x24; + if(byte1 > 0x24) + byte1 = 0x24; + if(priv->rf_type == RF_2T4R) //Only 2T4R you have to care the Antenna Tx Power offset + { // check antenna C over the max index 0x24 + if(priv->RF_C_TxPwDiff > 0) + { + if( (byte0 + (u8)priv->RF_C_TxPwDiff) > 0x24) + byte0 = 0x24 - priv->RF_C_TxPwDiff; + if( (byte1 + (u8)priv->RF_C_TxPwDiff) > 0x24) + byte1 = 0x24 - priv->RF_C_TxPwDiff; + } + } + TxAGC = (byte1<<8) |byte0; + write_nic_dword(dev, CCK_TXAGC, TxAGC); +#else + #ifdef RTL8192E + + TxAGC = powerlevel; + if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range + { + if(priv->CustomerID == RT_CID_819x_Netcore) + TxAGC = 0x22; + else + TxAGC += priv->CckPwEnl; + } + if(TxAGC > 0x24) + TxAGC = 0x24; + rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC); + #endif +#endif +} + + +void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //Joseph TxPower for 8192 testing +#ifdef RTL8190P + u32 TxAGC1=0, TxAGC2=0, TxAGC2_tmp = 0; + u8 i, byteVal1[4], byteVal2[4], byteVal3[4]; + + if(priv->bDynamicTxHighPower == true) //Add by Jacken 2008/03/06 + { + TxAGC1 |= ((powerlevel<<24)|(powerlevel<<16)|(powerlevel<<8)|powerlevel); + //for tx power track + TxAGC2_tmp = TxAGC1; + + TxAGC1 += priv->MCSTxPowerLevelOriginalOffset[0]; + TxAGC2 =0x03030303; + + //for tx power track + TxAGC2_tmp += priv->MCSTxPowerLevelOriginalOffset[1]; + } + else + { + TxAGC1 |= ((powerlevel<<24)|(powerlevel<<16)|(powerlevel<<8)|powerlevel); + TxAGC2 = TxAGC1; + + TxAGC1 += priv->MCSTxPowerLevelOriginalOffset[0]; + TxAGC2 += priv->MCSTxPowerLevelOriginalOffset[1]; + + TxAGC2_tmp = TxAGC2; + + } + for(i=0; i<4; i++) + { + byteVal1[i] = (u8)( (TxAGC1 & (0xff<<(i*8))) >>(i*8) ); + if(byteVal1[i] > 0x24) + byteVal1[i] = 0x24; + byteVal2[i] = (u8)( (TxAGC2 & (0xff<<(i*8))) >>(i*8) ); + if(byteVal2[i] > 0x24) + byteVal2[i] = 0x24; + + //for tx power track + byteVal3[i] = (u8)( (TxAGC2_tmp & (0xff<<(i*8))) >>(i*8) ); + if(byteVal3[i] > 0x24) + byteVal3[i] = 0x24; + } + + if(priv->rf_type == RF_2T4R) //Only 2T4R you have to care the Antenna Tx Power offset + { // check antenna C over the max index 0x24 + if(priv->RF_C_TxPwDiff > 0) + { + for(i=0; i<4; i++) + { + if( (byteVal1[i] + (u8)priv->RF_C_TxPwDiff) > 0x24) + byteVal1[i] = 0x24 - priv->RF_C_TxPwDiff; + if( (byteVal2[i] + (u8)priv->RF_C_TxPwDiff) > 0x24) + byteVal2[i] = 0x24 - priv->RF_C_TxPwDiff; + if( (byteVal3[i] + (u8)priv->RF_C_TxPwDiff) > 0x24) + byteVal3[i] = 0x24 - priv->RF_C_TxPwDiff; + } + } + } + + TxAGC1 = (byteVal1[3]<<24) | (byteVal1[2]<<16) |(byteVal1[1]<<8) |byteVal1[0]; + TxAGC2 = (byteVal2[3]<<24) | (byteVal2[2]<<16) |(byteVal2[1]<<8) |byteVal2[0]; + + //for tx power track + TxAGC2_tmp = (byteVal3[3]<<24) | (byteVal3[2]<<16) |(byteVal3[1]<<8) |byteVal3[0]; + priv->Pwr_Track = TxAGC2_tmp; + //DbgPrint("TxAGC2_tmp = 0x%x\n", TxAGC2_tmp); + + //DbgPrint("TxAGC1/TxAGC2 = 0x%x/0x%x\n", TxAGC1, TxAGC2); + write_nic_dword(dev, MCS_TXAGC, TxAGC1); + write_nic_dword(dev, MCS_TXAGC+4, TxAGC2); +#else +#ifdef RTL8192E + u32 writeVal, powerBase0, powerBase1, writeVal_tmp; + u8 index = 0; + u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c}; + u8 byte0, byte1, byte2, byte3; + + powerBase0 = powerlevel + priv->LegacyHTTxPowerDiff; //OFDM rates + powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0; + powerBase1 = powerlevel; //MCS rates + powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1; + + for(index=0; index<6; index++) + { + writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index<2)?powerBase0:powerBase1); + byte0 = (u8)(writeVal & 0x7f); + byte1 = (u8)((writeVal & 0x7f00)>>8); + byte2 = (u8)((writeVal & 0x7f0000)>>16); + byte3 = (u8)((writeVal & 0x7f000000)>>24); + if(byte0 > 0x24) // Max power index = 0x24 + byte0 = 0x24; + if(byte1 > 0x24) + byte1 = 0x24; + if(byte2 > 0x24) + byte2 = 0x24; + if(byte3 > 0x24) + byte3 = 0x24; + + if(index == 3) + { + writeVal_tmp = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0; + priv->Pwr_Track = writeVal_tmp; + } + + if(priv->bDynamicTxHighPower == true) //Add by Jacken 2008/03/06 //when DM implement, add this + { + writeVal = 0x03030303; + } + else + { + writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0; + } + rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal); + } + +#endif +#endif + return; +} + +#define MAX_DOZE_WAITING_TIMES_9x 64 +bool +SetRFPowerState8190( + struct net_device* dev, + RT_RF_POWER_STATE eRFPowerState + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + PRT_POWER_SAVE_CONTROL pPSC = (PRT_POWER_SAVE_CONTROL)(&(priv->ieee80211->PowerSaveControl)); + bool bResult = true; + //u8 eRFPath; + u8 i = 0, QueueID = 0; + ptx_ring head=NULL,tail=NULL; + + if(priv->SetRFPowerStateInProgress == true) + return false; + RT_TRACE(COMP_POWER, "===========> SetRFPowerState8190()!\n"); + priv->SetRFPowerStateInProgress = true; + + switch(priv->rf_chip) + { + case RF_8256: + switch( eRFPowerState ) + { + case eRfOn: + RT_TRACE(COMP_POWER, "SetRFPowerState8190() eRfOn !\n"); + //RXTX enable control: On + //for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) + // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2); + #ifdef RTL8190P + if(priv->rf_type == RF_2T4R) + { + //enable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] + //enable RF-Chip C/D + rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4] + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8] + //digital to analog on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e0, 0xf); // 0x880[8:5] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0xf);// 0xc04[3:0] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0xf);// 0xd04[3:0] + //analog to digital part2 on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e00, 0xf); // 0x880[12:9] + } + else if(priv->rf_type == RF_1T2R) //RF-C, RF-D + { + //enable RF-Chip C/D + rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4] + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xc00, 0x3);// 0x88c[11:10] + //digital to analog on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x180, 0x3); // 0x880[8:7] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xc, 0x3);// 0xc04[3:2] + //rx antenna on + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xc, 0x3);// 0xd04[3:2] + //analog to digital part2 on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1800, 0x3); // 0x880[12:11] + } + #else + write_nic_byte(dev, ANAPAR, 0x37);//160MHz + write_nic_byte(dev, MacBlkCtrl, 0x17); // 0x403 + mdelay(1); + //enable clock 80/88 MHz + + priv->bHwRfOffAction = 0; + //} + + // Baseband reset 2008.09.30 add + write_nic_byte(dev, BB_RESET, (read_nic_byte(dev, BB_RESET)|BIT0)); + + //2 AFE + // 2008.09.30 add + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x20000000, 0x1); // 0x884 + //analog to digital part2 on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] + //digital to analog on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x98, 0x13); // 0x880[4:3] + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf03, 0xf03);// 0x88c[9:8] + //rx antenna on + //PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0] + //rx antenna on 2008.09.30 mark + //PHY_SetBBReg(Adapter, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0] + + //2 RF + //enable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] + rtl8192_setBBreg(dev, rFPGA0_XB_RFInterfaceOE, BIT4, 0x1); // 0x864[4] + #endif + break; + + // + // In current solution, RFSleep=RFOff in order to save power under 802.11 power save. + // By Bruce, 2008-01-16. + // + case eRfSleep: + case eRfOff: + RT_TRACE(COMP_POWER, "SetRFPowerState8190() eRfOff/Sleep !\n"); + if (pPSC->bLeisurePs) + { + for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; ) + { + switch(QueueID) { + case MGNT_QUEUE: + tail=priv->txmapringtail; + head=priv->txmapringhead; + break; + + case BK_QUEUE: + tail=priv->txbkpringtail; + head=priv->txbkpringhead; + break; + + case BE_QUEUE: + tail=priv->txbepringtail; + head=priv->txbepringhead; + break; + + case VI_QUEUE: + tail=priv->txvipringtail; + head=priv->txvipringhead; + break; + + case VO_QUEUE: + tail=priv->txvopringtail; + head=priv->txvopringhead; + break; + + default: + tail=head=NULL; + break; + } + if(tail == head) + { + //DbgPrint("QueueID = %d", QueueID); + QueueID++; + continue; + } + else + { + RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times BusyQueue[%d] !=0 before doze!\n", (i+1), QueueID); + udelay(10); + i++; + } + + if(i >= MAX_DOZE_WAITING_TIMES_9x) + { + RT_TRACE(COMP_POWER, "\n\n\n TimeOut!! SetRFPowerState8190(): eRfOff: %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID); + break; + } + } + } + #ifdef RTL8190P + if(priv->rf_type == RF_2T4R) + { + //disable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4] + } + //disable RF-Chip C/D + rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x0); // 0x868[4] + //analog to digital off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + //digital to analog off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e0, 0x0); // 0x880[8:5] + //rx antenna off + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0] + //rx antenna off + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0] + //analog to digital part2 off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e00, 0x0); // 0x880[12:9] +#else //8192E + //2 RF + //disable RF-Chip A/B + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4] + rtl8192_setBBreg(dev, rFPGA0_XB_RFInterfaceOE, BIT4, 0x0); // 0x864[4] + //2 AFE + //analog to digital off, for power save + //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf03, 0x0); // 2008.09.30 Modify + //digital to analog off, for power save + //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3] + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x98, 0x0); // 0x880 2008.09.30 Modify + //rx antenna off 2008.09.30 mark + //PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0] + //rx antenna off 2008.09.30 mark + //PHY_SetBBReg(Adapter, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0] + //analog to digital part2 off, for power save + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5] + // 2008.09.30 add + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x20000000, 0x0); // 0x884 + + + //disable clock 80/88 MHz 2008.09.30 mark + //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, 0x4, 0x0); // 0x880[2] + //2 BB + // Baseband reset 2008.09.30 add + write_nic_byte(dev, BB_RESET, (read_nic_byte(dev, BB_RESET)|BIT0)); // 0x101 + //MAC: off + write_nic_byte(dev, MacBlkCtrl, 0x0); // 0x403 + //slow down cpu/lbus clock from 160MHz to Lower + write_nic_byte(dev, ANAPAR, 0x07); // 0x 17 40MHz + priv->bHwRfOffAction = 0; + //} + #endif + break; + + default: + bResult = false; + RT_TRACE(COMP_ERR, "SetRFPowerState8190(): unknow state to set: 0x%X!!!\n", eRFPowerState); + break; + } + + break; + + default: + RT_TRACE(COMP_ERR, "SetRFPowerState8190(): Unknown RF type\n"); + break; + } + + if(bResult) + { + // Update current RF state variable. + priv->ieee80211->eRFPowerState = eRFPowerState; + + switch(priv->rf_chip ) + { + case RF_8256: + switch(priv->ieee80211->eRFPowerState) + { + case eRfOff: + // + //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 + // + if(priv->ieee80211->RfOffReason==RF_CHANGE_BY_IPS ) + { + #ifdef TO_DO + Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK); + #endif + } + else + { + // Turn off LED if RF is not ON. + #ifdef TO_DO + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); + #endif + } + break; + + case eRfOn: + // Turn on RF we are still linked, which might happen when + // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. + if( priv->ieee80211->state == IEEE80211_LINKED) + { + #ifdef TO_DO + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); + #endif + } + else + { + // Turn off LED if RF is not ON. + #ifdef TO_DO + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + #endif + } + break; + + default: + // do nothing. + break; + }// Switch RF state + + break; + + default: + RT_TRACE(COMP_ERR, "SetRFPowerState8190(): Unknown RF type\n"); + break; + }// Switch RFChipID + } + + priv->SetRFPowerStateInProgress = false; + RT_TRACE(COMP_POWER, "<=========== SetRFPowerState8190() bResult = %d!\n", bResult); + return bResult; +} + + + +// +// Description: +// Change RF power state. +// +// Assumption: +// This function must be executed in re-schdulable context, +// ie. PASSIVE_LEVEL. +// +// 050823, by rcnjko. +// +bool +SetRFPowerState( + struct net_device* dev, + RT_RF_POWER_STATE eRFPowerState + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + bool bResult = false; + + RT_TRACE(COMP_RF,"---------> SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState); +#ifdef RTL8192E + if(eRFPowerState == priv->ieee80211->eRFPowerState && priv->bHwRfOffAction == 0) +#else + if(eRFPowerState == priv->ieee80211->eRFPowerState) +#endif + { + RT_TRACE(COMP_POWER, "<--------- SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState); + return bResult; + } + + bResult = SetRFPowerState8190(dev, eRFPowerState); + + RT_TRACE(COMP_POWER, "<--------- SetRFPowerState(): bResult(%d)\n", bResult); + + return bResult; +} + +void +MgntDisconnectIBSS( + struct net_device* dev +) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //RT_OP_MODE OpMode; + u8 i; + bool bFilterOutNonAssociatedBSSID = false; + + //IEEE80211_DEBUG(IEEE80211_DL_TRACE, "XXXXXXXXXX MgntDisconnect IBSS\n"); + + priv->ieee80211->state = IEEE80211_NOLINK; + +// PlatformZeroMemory( pMgntInfo->Bssid, 6 ); + for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i]= 0x55; + priv->OpMode = RT_OP_MODE_NO_LINK; + write_nic_word(dev, BSSIDR, ((u16*)priv->ieee80211->current_network.bssid)[0]); + write_nic_dword(dev, BSSIDR+2, ((u32*)(priv->ieee80211->current_network.bssid+2))[0]); + { + RT_OP_MODE OpMode = priv->OpMode; + //LED_CTL_MODE LedAction = LED_CTL_NO_LINK; + u8 btMsr = read_nic_byte(dev, MSR); + + btMsr &= 0xfc; + + switch(OpMode) + { + case RT_OP_MODE_INFRASTRUCTURE: + btMsr |= MSR_LINK_MANAGED; + //LedAction = LED_CTL_LINK; + break; + + case RT_OP_MODE_IBSS: + btMsr |= MSR_LINK_ADHOC; + // led link set seperate + break; + + case RT_OP_MODE_AP: + btMsr |= MSR_LINK_MASTER; + //LedAction = LED_CTL_LINK; + break; + + default: + btMsr |= MSR_LINK_NONE; + break; + } + + write_nic_byte(dev, MSR, btMsr); + + // LED control + //Adapter->HalFunc.LedControlHandler(Adapter, LedAction); + } + ieee80211_stop_send_beacons(priv->ieee80211); + + // If disconnect, clear RCR CBSSID bit + bFilterOutNonAssociatedBSSID = false; + { + u32 RegRCR, Type; + Type = bFilterOutNonAssociatedBSSID; + RegRCR = read_nic_dword(dev,RCR); + priv->ReceiveConfig = RegRCR; + if (Type == true) + RegRCR |= (RCR_CBSSID); + else if (Type == false) + RegRCR &= (~RCR_CBSSID); + + { + write_nic_dword(dev, RCR,RegRCR); + priv->ReceiveConfig = RegRCR; + } + + } + //MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE ); + notify_wx_assoc_event(priv->ieee80211); + +} + +void +MlmeDisassociateRequest( + struct net_device* dev, + u8* asSta, + u8 asRsn + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 i; + + RemovePeerTS(priv->ieee80211, asSta); + + SendDisassociation( priv->ieee80211, asSta, asRsn ); + + if(memcpy(priv->ieee80211->current_network.bssid,asSta,6) == 0) + { + //ShuChen TODO: change media status. + //ShuChen TODO: What to do when disassociate. + priv->ieee80211->state = IEEE80211_NOLINK; + //pMgntInfo->AsocTimestamp = 0; + for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x22; +// pMgntInfo->mBrates.Length = 0; +// Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_BASIC_RATE, (pu1Byte)(&pMgntInfo->mBrates) ); + priv->OpMode = RT_OP_MODE_NO_LINK; + { + RT_OP_MODE OpMode = priv->OpMode; + //LED_CTL_MODE LedAction = LED_CTL_NO_LINK; + u8 btMsr = read_nic_byte(dev, MSR); + + btMsr &= 0xfc; + + switch(OpMode) + { + case RT_OP_MODE_INFRASTRUCTURE: + btMsr |= MSR_LINK_MANAGED; + //LedAction = LED_CTL_LINK; + break; + + case RT_OP_MODE_IBSS: + btMsr |= MSR_LINK_ADHOC; + // led link set seperate + break; + + case RT_OP_MODE_AP: + btMsr |= MSR_LINK_MASTER; + //LedAction = LED_CTL_LINK; + break; + + default: + btMsr |= MSR_LINK_NONE; + break; + } + + write_nic_byte(dev, MSR, btMsr); + + // LED control + //Adapter->HalFunc.LedControlHandler(Adapter, LedAction); + } + ieee80211_disassociate(priv->ieee80211); + + write_nic_word(dev, BSSIDR, ((u16*)priv->ieee80211->current_network.bssid)[0]); + write_nic_dword(dev, BSSIDR+2, ((u32*)(priv->ieee80211->current_network.bssid+2))[0]); + + } + +} + + +void +MgntDisconnectAP( + struct net_device* dev, + u8 asRsn +) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + bool bFilterOutNonAssociatedBSSID = false; + +// +// Commented out by rcnjko, 2005.01.27: +// I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). +// +// //2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success +// SecClearAllKeys(Adapter); + + // In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. +#ifdef TO_DO + if( pMgntInfo->SecurityInfo.AuthMode > RT_802_11AuthModeAutoSwitch || + (pMgntInfo->bAPSuportCCKM && pMgntInfo->bCCX8021xenable) ) // In CCKM mode will Clear key + { + SecClearAllKeys(Adapter); + RT_TRACE(COMP_SEC, DBG_LOUD,("======>CCKM clear key...")) + } +#endif + // If disconnect, clear RCR CBSSID bit + bFilterOutNonAssociatedBSSID = false; + { + u32 RegRCR, Type; + + Type = bFilterOutNonAssociatedBSSID; + //Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RCR, (pu1Byte)(&RegRCR)); + RegRCR = read_nic_dword(dev,RCR); + priv->ReceiveConfig = RegRCR; + + if (Type == true) + RegRCR |= (RCR_CBSSID); + else if (Type == false) + RegRCR &= (~RCR_CBSSID); + + write_nic_dword(dev, RCR,RegRCR); + priv->ReceiveConfig = RegRCR; + + + } + // 2004.10.11, by rcnjko. + //MlmeDisassociateRequest( Adapter, pMgntInfo->Bssid, disas_lv_ss ); + MlmeDisassociateRequest( dev, priv->ieee80211->current_network.bssid, asRsn ); + + priv->ieee80211->state = IEEE80211_NOLINK; + //pMgntInfo->AsocTimestamp = 0; +} + + +bool +MgntDisconnect( + struct net_device* dev, + u8 asRsn +) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + // + // Schedule an workitem to wake up for ps mode, 070109, by rcnjko. + // +#ifdef TO_DO + if(pMgntInfo->mPss != eAwake) + { + // + // Using AwkaeTimer to prevent mismatch ps state. + // In the timer the state will be changed according to the RF is being awoke or not. By Bruce, 2007-10-31. + // + // PlatformScheduleWorkItem( &(pMgntInfo->AwakeWorkItem) ); + PlatformSetTimer( Adapter, &(pMgntInfo->AwakeTimer), 0 ); + } +#endif + // Follow 8180 AP mode, 2005.05.30, by rcnjko. +#ifdef TO_DO + if(pMgntInfo->mActingAsAp) + { + RT_TRACE(COMP_MLME, DBG_LOUD, ("MgntDisconnect() ===> AP_DisassociateAllStation\n")); + AP_DisassociateAllStation(Adapter, unspec_reason); + return TRUE; + } +#endif + // Indication of disassociation event. + //DrvIFIndicateDisassociation(Adapter, asRsn); + + // In adhoc mode, update beacon frame. + if( priv->ieee80211->state == IEEE80211_LINKED ) + { + if( priv->ieee80211->iw_mode == IW_MODE_ADHOC ) + { + //RT_TRACE(COMP_MLME, "MgntDisconnect() ===> MgntDisconnectIBSS\n"); + MgntDisconnectIBSS(dev); + } + if( priv->ieee80211->iw_mode == IW_MODE_INFRA ) + { + // We clear key here instead of MgntDisconnectAP() because that + // MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, + // e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is + // used to handle disassociation related things to AP, e.g. send Disassoc + // frame to AP. 2005.01.27, by rcnjko. + //IEEE80211_DEBUG(IEEE80211_DL_TRACE,"MgntDisconnect() ===> MgntDisconnectAP\n"); + MgntDisconnectAP(dev, asRsn); + } + + // Inidicate Disconnect, 2005.02.23, by rcnjko. + //MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE); + } + + return true; +} + +// +// Description: +// Chang RF Power State. +// Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. +// +// Assumption: +// PASSIVE LEVEL. +// +bool +MgntActSet_RF_State( + struct net_device* dev, + RT_RF_POWER_STATE StateToSet, + RT_RF_CHANGE_SOURCE ChangeSource + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + bool bActionAllowed = false; + bool bConnectBySSID = false; + RT_RF_POWER_STATE rtState; + u16 RFWaitCounter = 0; + unsigned long flag; + RT_TRACE(COMP_POWER, "===>MgntActSet_RF_State(): StateToSet(%d)\n",StateToSet); + + //1// + //1//<1>Prevent the race condition of RF state change. + //1// + // Only one thread can change the RF state at one time, and others should wait to be executed. By Bruce, 2007-11-28. + + while(true) + { + spin_lock_irqsave(&priv->rf_ps_lock,flag); + if(priv->RFChangeInProgress) + { + spin_unlock_irqrestore(&priv->rf_ps_lock,flag); + RT_TRACE(COMP_POWER, "MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(%d).\n", StateToSet); + + // Set RF after the previous action is done. + while(priv->RFChangeInProgress) + { + RFWaitCounter ++; + RT_TRACE(COMP_POWER, "MgntActSet_RF_State(): Wait 1 ms (%d times)...\n", RFWaitCounter); + udelay(1000); // 1 ms + + // Wait too long, return FALSE to avoid to be stuck here. + if(RFWaitCounter > 100) + { + RT_TRACE(COMP_ERR, "MgntActSet_RF_State(): Wait too logn to set RF\n"); + // TODO: Reset RF state? + return false; + } + } + } + else + { + priv->RFChangeInProgress = true; + spin_unlock_irqrestore(&priv->rf_ps_lock,flag); + break; + } + } + + rtState = priv->ieee80211->eRFPowerState; + + switch(StateToSet) + { + case eRfOn: + // + // Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or + // the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. + // + + priv->ieee80211->RfOffReason &= (~ChangeSource); + + if(! priv->ieee80211->RfOffReason) + { + priv->ieee80211->RfOffReason = 0; + bActionAllowed = true; + + + if(rtState == eRfOff && ChangeSource >=RF_CHANGE_BY_HW ) + { + bConnectBySSID = true; + } + } + else + RT_TRACE(COMP_POWER, "MgntActSet_RF_State - eRfon reject pMgntInfo->RfOffReason= 0x%x, ChangeSource=0x%X\n", priv->ieee80211->RfOffReason, ChangeSource); + + break; + + case eRfOff: + + if (priv->ieee80211->RfOffReason > RF_CHANGE_BY_IPS) + { + // + // 060808, Annie: + // Disconnect to current BSS when radio off. Asked by QuanTa. + // + // Set all link status falg, by Bruce, 2007-06-26. + //MgntActSet_802_11_DISASSOCIATE( Adapter, disas_lv_ss ); + MgntDisconnect(dev, disas_lv_ss); + + // Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. + // 2007.05.28, by shien chang. + + } + + + priv->ieee80211->RfOffReason |= ChangeSource; + bActionAllowed = true; + break; + + case eRfSleep: + priv->ieee80211->RfOffReason |= ChangeSource; + bActionAllowed = true; + break; + + default: + break; + } + + if(bActionAllowed) + { + RT_TRACE(COMP_POWER, "MgntActSet_RF_State(): Action is allowed.... StateToSet(%d), RfOffReason(%#X)\n", StateToSet, priv->ieee80211->RfOffReason); + // Config HW to the specified mode. + SetRFPowerState(dev, StateToSet); + // Turn on RF. + if(StateToSet == eRfOn) + { + //Adapter->HalFunc.HalEnableRxHandler(Adapter); + if(bConnectBySSID) + { + //MgntActSet_802_11_SSID(Adapter, Adapter->MgntInfo.Ssid.Octet, Adapter->MgntInfo.Ssid.Length, TRUE ); + } + } + // Turn off RF. + else if(StateToSet == eRfOff) + { + //Adapter->HalFunc.HalDisableRxHandler(Adapter); + } + } + else + { + RT_TRACE(COMP_POWER, "MgntActSet_RF_State(): Action is rejected.... StateToSet(%d), ChangeSource(%#X), RfOffReason(%#X)\n", StateToSet, ChangeSource, priv->ieee80211->RfOffReason); + } + + // Release RF spinlock + spin_lock_irqsave(&priv->rf_ps_lock,flag); + priv->RFChangeInProgress = false; + spin_unlock_irqrestore(&priv->rf_ps_lock,flag); + + RT_TRACE(COMP_POWER, "<===MgntActSet_RF_State()\n"); + return bActionAllowed; +} + + |