diff options
Diffstat (limited to 'drivers/usb/gadget/pxa27x_udc.c')
| -rw-r--r-- | drivers/usb/gadget/pxa27x_udc.c | 2403 |
1 files changed, 2403 insertions, 0 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c new file mode 100644 index 00000000000..499b7a23f35 --- /dev/null +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -0,0 +1,2403 @@ +/* + * Handles the Intel 27x USB Device Controller (UDC) + * + * Inspired by original driver by Frank Becker, David Brownell, and others. + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/clk.h> +#include <linux/irq.h> + +#include <asm/byteorder.h> +#include <asm/hardware.h> + +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <asm/arch/udc.h> + +#include "pxa27x_udc.h" + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x + * series processors. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol. The + * biggest issues are: that the endpoints have to be set up before the + * controller can be enabled (minor, and not uncommon); and each endpoint + * can only have one configuration, interface and alternative interface + * number (major, and very unusual). Once set up, these cannot be changed + * without a controller reset. + * + * The workaround is to setup all combinations necessary for the gadgets which + * will work with this driver. This is done in pxa_udc structure, statically. + * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep. + * (You could modify this if needed. Some drivers have a "fifo_mode" module + * parameter to facilitate such changes.) + * + * The combinations have been tested with these gadgets : + * - zero gadget + * - file storage gadget + * - ether gadget + * + * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is + * made of UDC's double buffering either. USB "On-The-Go" is not implemented. + * + * All the requests are handled the same way : + * - the drivers tries to handle the request directly to the IO + * - if the IO fifo is not big enough, the remaining is send/received in + * interrupt handling. + */ + +#define DRIVER_VERSION "2008-04-18" +#define DRIVER_DESC "PXA 27x USB Device Controller driver" + +static const char driver_name[] = "pxa27x_udc"; +static struct pxa_udc *the_controller; + +static void handle_ep(struct pxa_ep *ep); + +/* + * Debug filesystem + */ +#ifdef CONFIG_USB_GADGET_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> + +static int state_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + int pos = 0, ret; + u32 tmp; + + ret = -ENODEV; + if (!udc->driver) + goto out; + + /* basic device status */ + pos += seq_printf(s, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); + + tmp = udc_readl(udc, UDCCR); + pos += seq_printf(s, + "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), " + "con=%d,inter=%d,altinter=%d\n", tmp, + (tmp & UDCCR_OEN) ? " oen":"", + (tmp & UDCCR_AALTHNP) ? " aalthnp":"", + (tmp & UDCCR_AHNP) ? " rem" : "", + (tmp & UDCCR_BHNP) ? " rstir" : "", + (tmp & UDCCR_DWRE) ? " dwre" : "", + (tmp & UDCCR_SMAC) ? " smac" : "", + (tmp & UDCCR_EMCE) ? " emce" : "", + (tmp & UDCCR_UDR) ? " udr" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : "", + (tmp & UDCCR_ACN) >> UDCCR_ACN_S, + (tmp & UDCCR_AIN) >> UDCCR_AIN_S, + (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); + /* registers for device and ep0 */ + pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", + udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); + pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", + udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); + pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); + pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, " + "reconfig=%lu\n", + udc->stats.irqs_reset, udc->stats.irqs_suspend, + udc->stats.irqs_resume, udc->stats.irqs_reconfig); + + ret = 0; +out: + return ret; +} + +static int queues_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + struct pxa_ep *ep; + struct pxa27x_request *req; + int pos = 0, i, maxpkt, ret; + + ret = -ENODEV; + if (!udc->driver) + goto out; + + /* dump endpoint queues */ + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + maxpkt = ep->fifo_size; + pos += seq_printf(s, "%-12s max_pkt=%d %s\n", + EPNAME(ep), maxpkt, "pio"); + + if (list_empty(&ep->queue)) { + pos += seq_printf(s, "\t(nothing queued)\n"); + continue; + } + + list_for_each_entry(req, &ep->queue, queue) { + pos += seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } + } + + ret = 0; +out: + return ret; +} + +static int eps_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + struct pxa_ep *ep; + int pos = 0, i, ret; + u32 tmp; + + ret = -ENODEV; + if (!udc->driver) + goto out; + + ep = &udc->pxa_ep[0]; + tmp = udc_ep_readl(ep, UDCCSR); + pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp, + (tmp & UDCCSR0_SA) ? " sa" : "", + (tmp & UDCCSR0_RNE) ? " rne" : "", + (tmp & UDCCSR0_FST) ? " fst" : "", + (tmp & UDCCSR0_SST) ? " sst" : "", + (tmp & UDCCSR0_DME) ? " dme" : "", + (tmp & UDCCSR0_IPR) ? " ipr" : "", + (tmp & UDCCSR0_OPC) ? " opc" : ""); + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR); + pos += seq_printf(s, "%-12s: " + "IN %lu(%lu reqs), OUT %lu(%lu reqs), " + "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, " + "udcbcr=%d\n", + EPNAME(ep), + ep->stats.in_bytes, ep->stats.in_ops, + ep->stats.out_bytes, ep->stats.out_ops, + ep->stats.irqs, + tmp, udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); + } + + ret = 0; +out: + return ret; +} + +static int eps_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, eps_dbg_show, inode->i_private); +} + +static int queues_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, queues_dbg_show, inode->i_private); +} + +static int state_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, state_dbg_show, inode->i_private); +} + +static const struct file_operations state_dbg_fops = { + .owner = THIS_MODULE, + .open = state_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static const struct file_operations queues_dbg_fops = { + .owner = THIS_MODULE, + .open = queues_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static const struct file_operations eps_dbg_fops = { + .owner = THIS_MODULE, + .open = eps_dbg_open, + .llseek = seq_lseek, + .read = seq_read, + .release = single_release, +}; + +static void pxa_init_debugfs(struct pxa_udc *udc) +{ + struct dentry *root, *state, *queues, *eps; + + root = debugfs_create_dir(udc->gadget.name, NULL); + if (IS_ERR(root) || !root) + goto err_root; + + state = debugfs_create_file("udcstate", 0400, root, udc, + &state_dbg_fops); + if (!state) + goto err_state; + queues = debugfs_create_file("queues", 0400, root, udc, + &queues_dbg_fops); + if (!queues) + goto err_queues; + eps = debugfs_create_file("epstate", 0400, root, udc, + &eps_dbg_fops); + if (!queues) + goto err_eps; + + udc->debugfs_root = root; + udc->debugfs_state = state; + udc->debugfs_queues = queues; + udc->debugfs_eps = eps; + return; +err_eps: + debugfs_remove(eps); +err_queues: + debugfs_remove(queues); +err_state: + debugfs_remove(root); +err_root: + dev_err(udc->dev, "debugfs is not available\n"); +} + +static void pxa_cleanup_debugfs(struct pxa_udc *udc) +{ + debugfs_remove(udc->debugfs_eps); + debugfs_remove(udc->debugfs_queues); + debugfs_remove(udc->debugfs_state); + debugfs_remove(udc->debugfs_root); + udc->debugfs_eps = NULL; + udc->debugfs_queues = NULL; + udc->debugfs_state = NULL; + udc->debugfs_root = NULL; +} + +#else +static inline void pxa_init_debugfs(struct pxa_udc *udc) +{ +} + +static inline void pxa_cleanup_debugfs(struct pxa_udc *udc) +{ +} +#endif + +/** + * is_match_usb_pxa - check if usb_ep and pxa_ep match + * @udc_usb_ep: usb endpoint + * @ep: pxa endpoint + * @config: configuration required in pxa_ep + * @interface: interface required in pxa_ep + * @altsetting: altsetting required in pxa_ep + * + * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise + */ +static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep, + int config, int interface, int altsetting) +{ + if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr) + return 0; + if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in) + return 0; + if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type) + return 0; + if ((ep->config != config) || (ep->interface != interface) + || (ep->alternate != altsetting)) + return 0; + return 1; +} + +/** + * find_pxa_ep - find pxa_ep structure matching udc_usb_ep + * @udc: pxa udc + * @udc_usb_ep: udc_usb_ep structure + * + * Match udc_usb_ep and all pxa_ep available, to see if one matches. + * This is necessary because of the strong pxa hardware restriction requiring + * that once pxa endpoints are initialized, their configuration is freezed, and + * no change can be made to their address, direction, or in which configuration, + * interface or altsetting they are active ... which differs from more usual + * models which have endpoints be roughly just addressable fifos, and leave + * configuration events up to gadget drivers (like all control messages). + * + * Note that there is still a blurred point here : + * - we rely on UDCCR register "active interface" and "active altsetting". + * This is a nonsense in regard of USB spec, where multiple interfaces are + * active at the same time. + * - if we knew for sure that the pxa can handle multiple interface at the + * same time, assuming Intel's Developer Guide is wrong, this function + * should be reviewed, and a cache of couples (iface, altsetting) should + * be kept in the pxa_udc structure. In this case this function would match + * against the cache of couples instead of the "last altsetting" set up. + * + * Returns the matched pxa_ep structure or NULL if none found + */ +static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc, + struct udc_usb_ep *udc_usb_ep) +{ + int i; + struct pxa_ep *ep; + int cfg = udc->config; + int iface = udc->last_interface; + int alt = udc->last_alternate; + + if (udc_usb_ep == &udc->udc_usb_ep[0]) + return &udc->pxa_ep[0]; + + for (i = 1; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt)) + return ep; + } + return NULL; +} + +/** + * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep + * @udc: pxa udc + * + * Context: in_interrupt() + * + * Updates all pxa_ep fields in udc_usb_ep structures, if this field was + * previously set up (and is not NULL). The update is necessary is a + * configuration change or altsetting change was issued by the USB host. + */ +static void update_pxa_ep_matches(struct pxa_udc *udc) +{ + int i; + struct udc_usb_ep *udc_usb_ep; + + for (i = 1; i < NR_USB_ENDPOINTS; i++) { + udc_usb_ep = &udc->udc_usb_ep[i]; + if (udc_usb_ep->pxa_ep) + udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep); + } +} + +/** + * pio_irq_enable - Enables irq generation for one endpoint + * @ep: udc endpoint + */ +static void pio_irq_enable(struct pxa_ep *ep) +{ + struct pxa_udc *udc = ep->dev; + int index = EPIDX(ep); + u32 udcicr0 = udc_readl(udc, UDCICR0); + u32 udcicr1 = udc_readl(udc, UDCICR1); + + if (index < 16) + udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2))); + else + udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2))); +} + +/** + * pio_irq_disable - Disables irq generation for one endpoint + * @ep: udc endpoint + * @index: endpoint number + */ +static void pio_irq_disable(struct pxa_ep *ep) +{ + struct pxa_udc *udc = ep->dev; + int index = EPIDX(ep); + u32 udcicr0 = udc_readl(udc, UDCICR0); + u32 udcicr1 = udc_readl(udc, UDCICR1); + + if (index < 16) + udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2))); + else + udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2))); +} + +/** + * udc_set_mask_UDCCR - set bits in UDCCR + * @udc: udc device + * @mask: bits to set in UDCCR + * + * Sets bits in UDCCR, leaving DME and FST bits as they were. + */ +static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask) +{ + u32 udccr = udc_readl(udc, UDCCR); + udc_writel(udc, UDCCR, + (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS)); +} + +/** + * udc_clear_mask_UDCCR - clears bits in UDCCR + * @udc: udc device + * @mask: bit to clear in UDCCR + * + * Clears bits in UDCCR, leaving DME and FST bits as they were. + */ +static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask) +{ + u32 udccr = udc_readl(udc, UDCCR); + udc_writel(udc, UDCCR, + (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS)); +} + +/** + * ep_count_bytes_remain - get how many bytes in udc endpoint + * @ep: udc endpoint + * + * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP) + */ +static int ep_count_bytes_remain(struct pxa_ep *ep) +{ + if (ep->dir_in) + return -EOPNOTSUPP; + return udc_ep_readl(ep, UDCBCR) & 0x3ff; +} + +/** + * ep_is_empty - checks if ep has byte ready for reading + * @ep: udc endpoint + * + * If endpoint is the control endpoint, checks if there are bytes in the + * control endpoint fifo. If endpoint is a data endpoint, checks if bytes + * are ready for reading on OUT endpoint. + * + * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint + */ +static int ep_is_empty(struct pxa_ep *ep) +{ + int ret; + + if (!is_ep0(ep) && ep->dir_in) + return -EOPNOTSUPP; + if (is_ep0(ep)) + ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE); + else + ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE); + return ret; +} + +/** + * ep_is_full - checks if ep has place to write bytes + * @ep: udc endpoint + * + * If endpoint is not the control endpoint and is an IN endpoint, checks if + * there is place to write bytes into the endpoint. + * + * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint + */ +static int ep_is_full(struct pxa_ep *ep) +{ + if (is_ep0(ep)) + return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR); + if (!ep->dir_in) + return -EOPNOTSUPP; + return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF)); +} + +/** + * epout_has_pkt - checks if OUT endpoint fifo has a packet available + * @ep: pxa endpoint + * + * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep. + */ +static int epout_has_pkt(struct pxa_ep *ep) +{ + if (!is_ep0(ep) && ep->dir_in) + return -EOPNOTSUPP; + if (is_ep0(ep)) + return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC); + return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC); +} + +/** + * set_ep0state - Set ep0 automata state + * @dev: udc device + * @state: state + */ +static void set_ep0state(struct pxa_udc *udc, int state) +{ + struct pxa_ep *ep = &udc->pxa_ep[0]; + char *old_stname = EP0_STNAME(udc); + + udc->ep0state = state; + ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname, + EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); +} + +/** + * ep0_idle - Put control endpoint into idle state + * @dev: udc device + */ +static void ep0_idle(struct pxa_udc *dev) +{ + set_ep0state(dev, WAIT_FOR_SETUP); +} + +/** + * inc_ep_stats_reqs - Update ep stats counts + * @ep: physical endpoint + * @req: usb request + * @is_in: ep direction (USB_DIR_IN or 0) + * + */ +static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in) +{ + if (is_in) + ep->stats.in_ops++; + else + ep->stats.out_ops++; +} + +/** + * inc_ep_stats_bytes - Update ep stats counts + * @ep: physical endpoint + * @count: bytes transfered on endpoint + * @req: usb request + * @is_in: ep direction (USB_DIR_IN or 0) + */ +static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in) +{ + if (is_in) + ep->stats.in_bytes += count; + else + ep->stats.out_bytes += count; +} + +/** + * pxa_ep_setup - Sets up an usb physical endpoint + * @ep: pxa27x physical endpoint + * + * Find the physical pxa27x ep, and setup its UDCCR + */ +static __init void pxa_ep_setup(struct pxa_ep *ep) +{ + u32 new_udccr; + + new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN) + | ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN) + | ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN) + | ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN) + | ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET) + | ((ep->dir_in) ? UDCCONR_ED : 0) + | ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS) + | UDCCONR_EE; + + udc_ep_writel(ep, UDCCR, new_udccr); +} + +/** + * pxa_eps_setup - Sets up all usb physical endpoints + * @dev: udc device + * + * Setup all pxa physical endpoints, except ep0 + */ +static __init void pxa_eps_setup(struct pxa_udc *dev) +{ + unsigned int i; + + dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev); + + for (i = 1; i < NR_PXA_ENDPOINTS; i++) + pxa_ep_setup(&dev->pxa_ep[i]); +} + +/** + * pxa_ep_alloc_request - Allocate usb request + * @_ep: usb endpoint + * @gfp_flags: + * + * For the pxa27x, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ +static struct usb_request * +pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct pxa27x_request *req; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req || !_ep) + return NULL; + + INIT_LIST_HEAD(&req->queue); + req->in_use = 0; + req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + + return &req->req; +} + +/** + * pxa_ep_free_request - Free usb request + * @_ep: usb endpoint + * @_req: usb request + * + * Wrapper around kfree to free _req + */ +static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa27x_request *req; + + req = container_of(_req, struct pxa27x_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/** + * ep_add_request - add a request to the endpoint's queue + * @ep: usb endpoint + * @req: usb request + * + * Context: ep->lock held + * + * Queues the request in the endpoint's queue, and enables the interrupts + * on the endpoint. + */ +static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req) +{ + if (unlikely(!req)) + return; + ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req, + req->req.length, udc_ep_readl(ep, UDCCSR)); + + req->in_use = 1; + list_add_tail(&req->queue, &ep->queue); + pio_irq_enable(ep); +} + +/** + * ep_del_request - removes a request from the endpoint's queue + * @ep: usb endpoint + * @req: usb request + * + * Context: ep->lock held + * + * Unqueue the request from the endpoint's queue. If there are no more requests + * on the endpoint, and if it's not the control endpoint, interrupts are + * disabled on the endpoint. + */ +static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req) +{ + if (unlikely(!req)) + return; + ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req, + req->req.length, udc_ep_readl(ep, UDCCSR)); + + list_del_init(&req->queue); + req->in_use = 0; + if (!is_ep0(ep) && list_empty(&ep->queue)) + pio_irq_disable(ep); +} + +/** + * req_done - Complete an usb request + * @ep: pxa physical endpoint + * @req: pxa request + * @status: usb request status sent to gadget API + * + * Context: ep->lock held + * + * Retire a pxa27x usb request. Endpoint must be locked. + */ +static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) +{ + ep_del_request(ep, req); + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + ep_dbg(ep, "complete req %p stat %d len %u/%u\n", + &req->req, status, + req->req.actual, req->req.length); + + req->req.complete(&req->udc_usb_ep->usb_ep, &req->req); +} + +/** + * ep_end_out_req - Ends control endpoint in request + * @ep: physical endpoint + * @req: pxa request + * + * Context: ep->lock held + * + * Ends endpoint in request (completes usb request). + */ +static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +{ + inc_ep_stats_reqs(ep, !USB_DIR_IN); + req_done(ep, req, 0); +} + +/** + * ep0_end_out_req - Ends control endpoint in request (ends data stage) + * @ep: physical endpoint + * @req: pxa request + * + * Context: ep->lock held + * + * Ends control endpoint in request (completes usb request), and puts + * control endpoint into idle state + */ +static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) +{ + set_ep0state(ep->dev, OUT_STATUS_STAGE); + ep_end_out_req(ep, req); + ep0_idle(ep->dev); +} + +/** + * ep_end_in_req - Ends endpoint out request + * @ep: physical endpoint + * @req: pxa request + * + * Context: ep->lock held + * + * Ends endpoint out request (completes usb request). + */ +static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +{ + inc_ep_stats_reqs(ep, USB_DIR_IN); + req_done(ep, req, 0); +} + +/** + * ep0_end_in_req - Ends control endpoint out request (ends data stage) + * @ep: physical endpoint + * @req: pxa request + * + * Context: ep->lock held + * + * Ends control endpoint out request (completes usb request), and puts + * control endpoint into status state + */ +static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) +{ + struct pxa_udc *udc = ep->dev; + + set_ep0state(udc, IN_STATUS_STAGE); + ep_end_in_req(ep, req); +} + +/** + * nuke - Dequeue all requests + * @ep: pxa endpoint + * @status: usb request status + * + * Context: ep->lock held + * + * Dequeues all requests on an endpoint. As a side effect, interrupts will be + * disabled on that endpoint (because no more requests). + */ +static void nuke(struct pxa_ep *ep, int status) +{ + struct pxa27x_request *req; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + req_done(ep, req, status); + } +} + +/** + * read_packet - transfer 1 packet from an OUT endpoint into request + * @ep: pxa physical endpoint + * @req: usb request + * + * Takes bytes from OUT endpoint and transfers them info the usb request. + * If there is less space in request than bytes received in OUT endpoint, + * bytes are left in the OUT endpoint. + * + * Returns how many bytes were actually transfered + */ +static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req) +{ + u32 *buf; + int bytes_ep, bufferspace, count, i; + + bytes_ep = ep_count_bytes_remain(ep); + bufferspace = req->req.length - req->req.actual; + + buf = (u32 *)(req->req.buf + req->req.actual); + prefetchw(buf); + + if (likely(!ep_is_empty(ep))) + count = min(bytes_ep, bufferspace); + else /* zlp */ + count = 0; + + for (i = count; i > 0; i -= 4) + *buf++ = udc_ep_readl(ep, UDCDR); + req->req.actual += count; + + udc_ep_writel(ep, UDCCSR, UDCCSR_PC); + + return count; +} + +/** + * write_packet - transfer 1 packet from request into an IN endpoint + * @ep: pxa physical endpoint + * @req: usb request + * @max: max bytes that fit into endpoint + * + * Takes bytes from usb request, and transfers them into the physical + * endpoint. If there are no bytes to transfer, doesn't write anything + * to physical endpoint. + * + * Returns how many bytes were actually transfered. + */ +static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned int max) +{ + int length, count, remain, i; + u32 *buf; + u8 *buf_8; + + buf = (u32 *)(req->req.buf + req->req.actual); + prefetch(buf); + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + remain = length & 0x3; + count = length & ~(0x3); + for (i = count; i > 0 ; i -= 4) + udc_ep_writel(ep, UDCDR, *buf++); + + buf_8 = (u8 *)buf; + for (i = remain; i > 0; i--) + udc_ep_writeb(ep, UDCDR, *buf_8++); + + ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain, + udc_ep_readl(ep, UDCCSR)); + + return length; +} + +/** + * read_fifo - Transfer packets from OUT endpoint into usb request + * @ep: pxa physical endpoint + * @req: usb request + * + * Context: callable when in_interrupt() + * + * Unload as many packets as possible from the fifo we use for usb OUT + * transfers and put them into the request. Caller should have made sure + * there's at least one packet ready. + * Doesn't complete the request, that's the caller's job + * + * Returns 1 if the request completed, 0 otherwise + */ +static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + int count, is_short, completed = 0; + + while (epout_has_pkt(ep)) { + count = read_packet(ep, req); + inc_ep_stats_bytes(ep, count, !USB_DIR_IN); + + is_short = (count < ep->fifo_size); + ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n", + udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "", + &req->req, req->req.actual, req->req.length); + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + completed = 1; + break; + } + /* finished that packet. the next one may be waiting... */ + } + return completed; +} + +/** + * write_fifo - transfer packets from usb request into an IN endpoint + * @ep: pxa physical endpoint + * @req: pxa usb request + * + * Write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + * Doesn't complete the request, that's the caller's job + * + * Returns 1 if request fully transfered, 0 if partial transfer + */ +static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + unsigned max; + int count, is_short, is_last = 0, completed = 0, totcount = 0; + u32 udccsr; + + max = ep->fifo_size; + do { + is_short = 0; + + udccsr = udc_ep_readl(ep, UDCCSR); + if (udccsr & UDCCSR_PC) { + ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n", + udccsr); + udc_ep_writel(ep, UDCCSR, UDCCSR_PC); + } + if (udccsr & UDCCSR_TRN) { + ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n", + udccsr); + udc_ep_writel(ep, UDCCSR, UDCCSR_TRN); + } + + count = write_packet(ep, req, max); + inc_ep_stats_bytes(ep, count, USB_DIR_IN); + totcount += count; + + /* last packet is usually short (or a zlp) */ + if (unlikely(count < max)) { + is_last = 1; + is_short = 1; + } else { + if (likely(req->req.length > req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely(max < ep->fifo_size); + } + + if (is_short) + udc_ep_writel(ep, UDCCSR, UDCCSR_SP); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + completed = 1; + break; + } + } while (!ep_is_full(ep)); + + ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n", + totcount, is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, &req->req); + + return completed; +} + +/** + * read_ep0_fifo - Transfer packets from control endpoint into usb request + * @ep: control endpoint + * @req: pxa usb request + * + * Special ep0 version of the above read_fifo. Reads as many bytes from control + * endpoint as can be read, and stores them into usb request (limited by request + * maximum length). + * + * Returns 0 if usb request only partially filled, 1 if fully filled + */ +static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + int count, is_short, completed = 0; + + while (epout_has_pkt(ep)) { + count = read_packet(ep, req); + udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC); + inc_ep_stats_bytes(ep, count, !USB_DIR_IN); + + is_short = (count < ep->fifo_size); + ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n", + udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "", + &req->req, req->req.actual, req->req.length); + + if (is_short || req->req.actual >= req->req.length) { + completed = 1; + break; + } + } + + return completed; +} + +/** + * write_ep0_fifo - Send a request to control endpoint (ep0 in) + * @ep: control endpoint + * @req: request + * + * Context: callable when in_interrupt() + * + * Sends a request (or a part of the request) to the control endpoint (ep0 in). + * If the request doesn't fit, the remaining part will be sent from irq. + * The request is considered fully written only if either : + * - last write transfered all remaining bytes, but fifo was not fully filled + * - last write was a 0 length write + * + * Returns 1 if request fully written, 0 if request only partially sent + */ +static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + unsigned count; + int is_last, is_short; + + count = write_packet(ep, req, EP0_FIFO_SIZE); + inc_ep_stats_bytes(ep, count, USB_DIR_IN); + + is_short = (count < EP0_FIFO_SIZE); + is_last = ((count == 0) || (count < EP0_FIFO_SIZE)); + + /* Sends either a short packet or a 0 length packet */ + if (unlikely(is_short)) + udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR); + + ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n", + count, is_short ? "/S" : "", is_last ? "/L" : "", + req->req.length - req->req.actual, + &req->req, udc_ep_readl(ep, UDCCSR)); + + return is_last; +} + +/** + * pxa_ep_queue - Queue a request into an IN endpoint + * @_ep: usb endpoint + * @_req: usb request + * @gfp_flags: flags + * + * Context: normally called when !in_interrupt, but callable when in_interrupt() + * in the special case of ep0 setup : + * (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue) + * + * Returns 0 if succedeed, error otherwise + */ +static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct udc_usb_ep *udc_usb_ep; + struct pxa_ep *ep; + struct pxa27x_request *req; + struct pxa_udc *dev; + unsigned long flags; + int rc = 0; + int is_first_req; + unsigned length; + + req = container_of(_req, struct pxa27x_request, req); + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + + if (unlikely(!_req || !_req->complete || !_req->buf)) + return -EINVAL; + + if (unlikely(!_ep)) + return -EINVAL; + + dev = udc_usb_ep->dev; + ep = udc_usb_ep->pxa_ep; + if (unlikely(!ep)) + return -EINVAL; + + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + ep_dbg(ep, "bogus device state\n"); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely(EPXFERTYPE_is_ISO(ep) + && req->req.length > ep->fifo_size)) + return -EMSGSIZE; + + spin_lock_irqsave(&ep->lock, flags); + + is_first_req = list_empty(&ep->queue); + ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n", + _req, is_first_req ? "yes" : "no", + _req->length, _req->buf); + + if (!ep->enabled) { + _req->status = -ESHUTDOWN; + rc = -ESHUTDOWN; + goto out; + } + + if (req->in_use) { + ep_err(ep, "refusing to queue req %p (already queued)\n", req); + goto out; + } + + length = _req->length; + _req->status = -EINPROGRESS; + _req->actual = 0; + + ep_add_request(ep, req); + + if (is_ep0(ep)) { + switch (dev->ep0state) { + case WAIT_ACK_SET_CONF_INTERF: + if (length == 0) { + ep_end_in_req(ep, req); + } else { + ep_err(ep, "got a request of %d bytes while" + "in state WATI_ACK_SET_CONF_INTERF\n", + length); + ep_del_request(ep, req); + rc = -EL2HLT; + } + ep0_idle(ep->dev); + break; + case IN_DATA_STAGE: + if (!ep_is_full(ep)) + if (write_ep0_fifo(ep, req)) + ep0_end_in_req(ep, req); + break; + case OUT_DATA_STAGE: + if ((length == 0) || !epout_has_pkt(ep)) + if (read_ep0_fifo(ep, req)) + ep0_end_out_req(ep, req); + break; + default: + ep_err(ep, "odd state %s to send me a request\n", + EP0_STNAME(ep->dev)); + ep_del_request(ep, req); + rc = -EL2HLT; + break; + } + } else { + handle_ep(ep); + } + +out: + spin_unlock_irqrestore(&ep->lock, flags); + return rc; +} + +/** + * pxa_ep_dequeue - Dequeue one request + * @_ep: usb endpoint + * @_req: usb request + * + * Return 0 if no error, -EINVAL or -ECONNRESET otherwise + */ +static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + struct pxa27x_request *req; + unsigned long flags; + int rc; + + if (!_ep) + return -EINVAL; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return -EINVAL; + + spin_lock_irqsave(&ep->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + + rc = -EINVAL; + if (&req->req != _req) + goto out; + + rc = 0; + req_done(ep, req, -ECONNRESET); +out: + spin_unlock_irqrestore(&ep->lock, flags); + return rc; +} + +/** + * pxa_ep_set_halt - Halts operations on one endpoint + * @_ep: usb endpoint + * @value: + * + * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise + */ +static int pxa_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + unsigned long flags; + int rc; + + + if (!_ep) + return -EINVAL; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return -EINVAL; + + if (value == 0) { + /* + * This path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + ep_dbg(ep, "only host can clear halt\n"); + return -EROFS; + } + + spin_lock_irqsave(&ep->lock, flags); + + rc = -EAGAIN; + if (ep->dir_in && (ep_is_full(ep) || !list_empty(&ep->queue))) + goto out; + + /* FST, FEF bits are the same for control and non control endpoints */ + rc = 0; + udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF); + if (is_ep0(ep)) + set_ep0state(ep->dev, STALL); + +out: + spin_unlock_irqrestore(&ep->lock, flags); + return rc; +} + +/** + * pxa_ep_fifo_status - Get how many bytes in physical endpoint + * @_ep: usb endpoint + * + * Returns number of bytes in OUT fifos. Broken for IN fifos. + */ +static int pxa_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + + if (!_ep) + return -ENODEV; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return -ENODEV; + + if (ep->dir_in) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep)) + return 0; + else + return ep_count_bytes_remain(ep) + 1; +} + +/** + * pxa_ep_fifo_flush - Flushes one endpoint + * @_ep: usb endpoint + * + * Discards all data in one endpoint(IN or OUT), except control endpoint. + */ +static void pxa_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + unsigned long flags; + + if (!_ep) + return; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return; + + spin_lock_irqsave(&ep->lock, flags); + + if (unlikely(!list_empty(&ep->queue))) + ep_dbg(ep, "called while queue list not empty\n"); + ep_dbg(ep, "called\n"); + + /* for OUT, just read and discard the FIFO contents. */ + if (!ep->dir_in) { + while (!ep_is_empty(ep)) + udc_ep_readl(ep, UDCDR); + } else { + /* most IN status is the same, but ISO can't stall */ + udc_ep_writel(ep, UDCCSR, + UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN + | (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST)); + } + + spin_unlock_irqrestore(&ep->lock, flags); + + return; +} + +/** + * pxa_ep_enable - Enables usb endpoint + * @_ep: usb endpoint + * @desc: usb endpoint descriptor + * + * Nothing much to do here, as ep configuration is done once and for all + * before udc is enabled. After udc enable, no physical endpoint configuration + * can be changed. + * Function makes sanity checks and flushes the endpoint. + */ +static int pxa_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + struct pxa_udc *udc; + + if (!_ep || !desc) + return -EINVAL; + + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + if (udc_usb_ep->pxa_ep) { + ep = udc_usb_ep->pxa_ep; + ep_warn(ep, "usb_ep %s already enabled, doing nothing\n", + _ep->name); + } else { + ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep); + } + + if (!ep || is_ep0(ep)) { + dev_err(udc_usb_ep->dev->dev, + "unable to match pxa_ep for ep %s\n", + _ep->name); + return -EINVAL; + } + + if ((desc->bDescriptorType != USB_DT_ENDPOINT) + || (ep->type != usb_endpoint_type(desc))) { + ep_err(ep, "type mismatch\n"); + return -EINVAL; + } + + if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { + ep_err(ep, "bad maxpacket\n"); + return -ERANGE; + } + + udc_usb_ep->pxa_ep = ep; + udc = ep->dev; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + ep_err(ep, "bogus device state\n"); + return -ESHUTDOWN; + } + + ep->enabled = 1; + + /* flush fifo (mostly for OUT buffers) */ + pxa_ep_fifo_flush(_ep); + + ep_dbg(ep, "enabled\n"); + return 0; +} + +/** + * pxa_ep_disable - Disable usb endpoint + * @_ep: usb endpoint + * + * Same as for pxa_ep_enable, no physical endpoint configuration can be + * changed. + * Function flushes the endpoint and related requests. + */ +static int pxa_ep_disable(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + unsigned long flags; + + if (!_ep) + return -EINVAL; + + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep) || !list_empty(&ep->queue)) + return -EINVAL; + + spin_lock_irqsave(&ep->lock, flags); + ep->enabled = 0; + nuke(ep, -ESHUTDOWN); + spin_unlock_irqrestore(&ep->lock, flags); + + pxa_ep_fifo_flush(_ep); + udc_usb_ep->pxa_ep = NULL; + + ep_dbg(ep, "disabled\n"); + return 0; +} + +static struct usb_ep_ops pxa_ep_ops = { + .enable = pxa_ep_enable, + .disable = pxa_ep_disable, + + .alloc_request = pxa_ep_alloc_request, + .free_request = pxa_ep_free_request, + + .queue = pxa_ep_queue, + .dequeue = pxa_ep_dequeue, + + .set_halt = pxa_ep_set_halt, + .fifo_status = pxa_ep_fifo_status, + .fifo_flush = pxa_ep_fifo_flush, +}; + + +/** + * pxa_udc_get_frame - Returns usb frame number + * @_gadget: usb gadget + */ +static int pxa_udc_get_frame(struct usb_gadget *_gadget) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + return (udc_readl(udc, UDCFNR) & 0x7ff); +} + +/** + * pxa_udc_wakeup - Force udc device out of suspend + * @_gadget: usb gadget + * + * Returns 0 if succesfull, error code otherwise + */ +static int pxa_udc_wakeup(struct usb_gadget *_gadget) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + /* host may not have enabled remote wakeup */ + if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(udc, UDCCR_UDR); + return 0; +} + +static const struct usb_gadget_ops pxa_udc_ops = { + .get_frame = pxa_udc_get_frame, + .wakeup = pxa_udc_wakeup, + /* current versions must always be self-powered */ +}; + +/** + * udc_disable - disable udc device controller + * @udc: udc device + * + * Disables the udc device : disables clocks, udc interrupts, control endpoint + * interrupts. + */ +static void udc_disable(struct pxa_udc *udc) +{ + udc_writel(udc, UDCICR0, 0); + udc_writel(udc, UDCICR1, 0); + + udc_clear_mask_UDCCR(udc, UDCCR_UDE); + clk_disable(udc->clk); + + ep0_idle(udc); + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +/** + * udc_init_data - Initialize udc device data structures + * @dev: udc device + * + * Initializes gadget endpoint list, endpoints locks. No action is taken + * on the hardware. + */ +static __init void udc_init_data(struct pxa_udc *dev) +{ + int i; + struct pxa_ep *ep; + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0]; + ep0_idle(dev); + + /* PXA endpoints init */ + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &dev->pxa_ep[i]; + + ep->enabled = is_ep0(ep); + INIT_LIST_HEAD(&ep->queue); + spin_lock_init(&ep->lock); + } + + /* USB endpoints init */ + for (i = 0; i < NR_USB_ENDPOINTS; i++) + if (i != 0) + list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, + &dev->gadget.ep_list); +} + +/** + * udc_enable - Enables the udc device + * @dev: udc device + * + * Enables the udc device : enables clocks, udc interrupts, control endpoint + * interrupts, sets usb as UDC client and setups endpoints. + */ +static void udc_enable(struct pxa_udc *udc) +{ + udc_writel(udc, UDCICR0, 0); + udc_writel(udc, UDCICR1, 0); + udc_writel(udc, UP2OCR, UP2OCR_HXOE); + udc_clear_mask_UDCCR(udc, UDCCR_UDE); + + clk_enable(udc->clk); + + ep0_idle(udc); + udc->gadget.speed = USB_SPEED_FULL; + memset(&udc->stats, 0, sizeof(udc->stats)); + + udc_set_mask_UDCCR(udc, UDCCR_UDE); + udelay(2); + if (udc_readl(udc, UDCCR) & UDCCR_EMCE) + dev_err(udc->dev, "Configuration errors, udc disabled\n"); + + /* + * Caller must be able to sleep in order to cope with startup transients + */ + msleep(100); + + /* enable suspend/resume and reset irqs */ + udc_writel(udc, UDCICR1, + UDCICR1_IECC | UDCICR1_IERU + | UDCICR1_IESU | UDCICR1_IERS); + + /* enable ep0 irqs */ + pio_irq_enable(&udc->pxa_ep[0]); + + dev_info(udc->dev, "UDC connecting\n"); + if (udc->mach->udc_command) + udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + +/** + * usb_gadget_register_driver - Register gadget driver + * @driver: gadget driver + * + * When a driver is successfully registered, it will receive control requests + * including set_configuration(), which enables non-control requests. Then + * usb traffic follows until a disconnect is reported. Then a host may connect + * again, or the driver might get unbound. + * + * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct pxa_udc *udc = the_controller; + int retval; + + if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind + || !driver->disconnect || !driver->setup) + return -EINVAL; + if (!udc) + return -ENODEV; + if (udc->driver) + return -EBUSY; + + /* first hook up the driver ... */ + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + + retval = device_add(&udc->gadget.dev); + if (retval) { + dev_err(udc->dev, "device_add error %d\n", retval); + goto add_fail; + } + retval = driver->bind(&udc->gadget); + if (retval) { + dev_err(udc->dev, "bind to driver %s --> error %d\n", + driver->driver.name, retval); + goto bind_fail; + } + dev_dbg(udc->dev, "registered gadget driver '%s'\n", + driver->driver.name); + + udc_enable(udc); + return 0; + +bind_fail: + device_del(&udc->gadget.dev); +add_fail: + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + return retval; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + + +/** + * stop_activity - Stops udc endpoints + * @udc: udc device + * @driver: gadget driver + * + * Disables all udc endpoints (even control endpoint), report disconnect to + * the gadget user. + */ +static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + udc->gadget.speed = USB_SPEED_UNKNOWN; + + for (i = 0; i < NR_USB_ENDPOINTS; i++) + pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep); + + if (driver) + driver->disconnect(&udc->gadget); +} + +/** + * usb_gadget_unregister_driver - Unregister the gadget driver + * @driver: gadget driver + * + * Returns 0 if no error, -ENODEV, -EINVAL otherwise + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct pxa_udc *udc = the_controller; + + if (!udc) + return -ENODEV; + if (!driver || driver != udc->driver || !driver->unbind) + return -EINVAL; + + stop_activity(udc, driver); + udc_disable(udc); + + driver->unbind(&udc->gadget); + udc->driver = NULL; + + device_del(&udc->gadget.dev); + + dev_info(udc->dev, "unregistered gadget driver '%s'\n", + driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +/** + * handle_ep0_ctrl_req - handle control endpoint control request + * @udc: udc device + * @req: control request + */ +static void handle_ep0_ctrl_req(struct pxa_udc *udc, + struct pxa27x_request *req) +{ + struct pxa_ep *ep = &udc->pxa_ep[0]; + union { + struct usb_ctrlrequest r; + u32 word[2]; + } u; + int i; + int have_extrabytes = 0; + + nuke(ep, -EPROTO); + + /* read SETUP packet */ + for (i = 0; i < 2; i++) { + if (unlikely(ep_is_empty(ep))) + goto stall; + u.word[i] = udc_ep_readl(ep, UDCDR); + } + + have_extrabytes = !ep_is_empty(ep); + while (!ep_is_empty(ep)) { + i = udc_ep_readl(ep, UDCDR); + ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i); + } + + ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + if (unlikely(have_extrabytes)) + goto stall; + + if (u.r.bRequestType & USB_DIR_IN) + set_ep0state(udc, IN_DATA_STAGE); + else + set_ep0state(udc, OUT_DATA_STAGE); + + /* Tell UDC to enter Data Stage */ + udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC); + + i = udc->driver->setup(&udc->gadget, &u.r); + if (i < 0) + goto stall; +out: + return; +stall: + ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n", + udc_ep_readl(ep, UDCCSR), i); + udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF); + set_ep0state(udc, STALL); + goto out; +} + +/** + * handle_ep0 - Handle control endpoint data transfers + * @udc: udc device + * @fifo_irq: 1 if triggered by fifo service type irq + * @opc_irq: 1 if triggered by output packet complete type irq + * + * Context : when in_interrupt() or with ep->lock held + * + * Tries to transfer all pending request data into the endpoint and/or + * transfer all pending data in the endpoint into usb requests. + * Handles states of ep0 automata. + * + * PXA27x hardware handles several standard usb control requests without + * driver notification. The requests fully handled by hardware are : + * SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE, + * GET_STATUS + * The requests handled by hardware, but with irq notification are : + * SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE + * The remaining standard requests really handled by handle_ep0 are : + * GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests. + * Requests standardized outside of USB 2.0 chapter 9 are handled more + * uniformly, by gadget drivers. + * + * The control endpoint state machine is _not_ USB spec compliant, it's even + * hardly compliant with Intel PXA270 developers guide. + * The key points which inferred this state machine are : + * - on every setup token, bit UDCCSR0_SA is raised and held until cleared by + * software. + * - on every OUT packet received, UDCCSR0_OPC is raised and held until + * cleared by software. + * - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it + * before reading ep0. + * - irq can be called on a "packet complete" event (opc_irq=1), while + * UDCCSR0_OPC is not yet raised (delta can be as big as 100ms + * from experimentation). + * - as UDCCSR0_SA can be activated while in irq handling, and clearing + * UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC + * => we never actually read the "status stage" packet of an IN data stage + * => this is not documented in Intel documentation + * - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA + * STAGE. The driver add STATUS STAGE to send last zero length packet in + * OUT_STATUS_STAGE. + * - special attention was needed for IN_STATUS_STAGE. If a packet complete + * event is detected, we terminate the status stage without ackowledging the + * packet (not to risk to loose a potential SETUP packet) + */ +static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) +{ + u32 udccsr0; + struct pxa_ep *ep = &udc->pxa_ep[0]; + struct pxa27x_request *req = NULL; + int completed = 0; + + udccsr0 = udc_ep_readl(ep, UDCCSR); + ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n", + EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR), + (fifo_irq << 1 | opc_irq)); + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + + if (udccsr0 & UDCCSR0_SST) { + ep_dbg(ep, "clearing stall status\n"); + nuke(ep, -EPIPE); + udc_ep_writel(ep, UDCCSR, UDCCSR0_SST); + ep0_idle(udc); + } + + if (udccsr0 & UDCCSR0_SA) { + nuke(ep, 0); + set_ep0state(udc, SETUP_STAGE); + } + + switch (udc->ep0state) { + case WAIT_FOR_SETUP: + /* + * Hardware bug : beware, we cannot clear OPC, since we would + * miss a potential OPC irq for a setup packet. + * So, we only do ... nothing, and hope for a next irq with + * UDCCSR0_SA set. + */ + break; + case SETUP_STAGE: + udccsr0 &= UDCCSR0_CTRL_REQ_MASK; + if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK)) + handle_ep0_ctrl_req(udc, req); + break; + case IN_DATA_STAGE: /* GET_DESCRIPTOR */ + if (epout_has_pkt(ep)) + udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC); + if (req && !ep_is_full(ep)) + completed = write_ep0_fifo(ep, req); + if (completed) + ep0_end_in_req(ep, req); + break; + case OUT_DATA_STAGE: /* SET_DESCRIPTOR */ + if (epout_has_pkt(ep) && req) + completed = read_ep0_fifo(ep, req); + if (completed) + ep0_end_out_req(ep, req); + break; + case STALL: + udc_ep_writel(ep, UDCCSR, UDCCSR0_FST); + break; + case IN_STATUS_STAGE: + /* + * Hardware bug : beware, we cannot clear OPC, since we would + * miss a potential PC irq for a setup packet. + * So, we only put the ep0 into WAIT_FOR_SETUP state. + */ + if (opc_irq) + ep0_idle(udc); + break; + case OUT_STATUS_STAGE: + case WAIT_ACK_SET_CONF_INTERF: + ep_warn(ep, "should never get in %s state here!!!\n", + EP0_STNAME(ep->dev)); + ep0_idle(udc); + break; + } +} + +/** + * handle_ep - Handle endpoint data tranfers + * @ep: pxa physical endpoint + * + * Tries to transfer all pending request data into the endpoint and/or + * transfer all pending data in the endpoint into usb requests. + * + * Is always called when in_interrupt() or with ep->lock held. + */ +static void handle_ep(struct pxa_ep *ep) +{ + struct pxa27x_request *req; + int completed; + u32 udccsr; + int is_in = ep->dir_in; + int loop = 0; + + do { + completed = 0; + udccsr = udc_ep_readl(ep, UDCCSR); + if (likely(!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa27x_request, queue); + else + req = NULL; + + ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n", + req, udccsr, loop++); + + if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN))) + udc_ep_writel(ep, UDCCSR, + udccsr & (UDCCSR_SST | UDCCSR_TRN)); + if (!req) + break; + + if (unlikely(is_in)) { + if (likely(!ep_is_full(ep))) + completed = write_fifo(ep, req); + if (completed) + ep_end_in_req(ep, req); + } else { + if (likely(epout_has_pkt(ep))) + completed = read_fifo(ep, req); + if (completed) + ep_end_out_req(ep, req); + } + } while (completed); +} + +/** + * pxa27x_change_configuration - Handle SET_CONF usb request notification + * @udc: udc device + * @config: usb configuration + * + * Post the request to upper level. + * Don't use any pxa specific harware configuration capabilities + */ +static void pxa27x_change_configuration(struct pxa_udc *udc, int config) +{ + struct usb_ctrlrequest req ; + + dev_dbg(udc->dev, "config=%d\n", config); + + udc->config = config; + udc->last_interface = 0; + udc->last_alternate = 0; + + req.bRequestType = 0; + req.bRequest = USB_REQ_SET_CONFIGURATION; + req.wValue = config; + req.wIndex = 0; + req.wLength = 0; + + set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF); + udc->driver->setup(&udc->gadget, &req); +} + +/** + * pxa27x_change_interface - Handle SET_INTERF usb request notification + * @udc: udc device + * @iface: interface number + * @alt: alternate setting number + * + * Post the request to upper level. + * Don't use any pxa specific harware configuration capabilities + */ +static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt) +{ + struct usb_ctrlrequest req; + + dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt); + + udc->last_interface = iface; + udc->last_alternate = alt; + + req.bRequestType = USB_RECIP_INTERFACE; + req.bRequest = USB_REQ_SET_INTERFACE; + req.wValue = alt; + req.wIndex = iface; + req.wLength = 0; + + set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF); + udc->driver->setup(&udc->gadget, &req); +} + +/* + * irq_handle_data - Handle data transfer + * @irq: irq IRQ number + * @udc: dev pxa_udc device structure + * + * Called from irq handler, transferts data to or from endpoint to queue + */ +static void irq_handle_data(int irq, struct pxa_udc *udc) +{ + int i; + struct pxa_ep *ep; + u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK; + u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK; + + if (udcisr0 & UDCISR_INT_MASK) { + udc->pxa_ep[0].stats.irqs++; + udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK)); + handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR), + !!(udcisr0 & UDCICR_PKTCOMPL)); + } + + udcisr0 >>= 2; + for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) { + if (!(udcisr0 & UDCISR_INT_MASK)) + continue; + + udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK)); + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } + + for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) { + udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK)); + if (!(udcisr1 & UDCISR_INT_MASK)) + continue; + + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } + +} + +/** + * irq_udc_suspend - Handle IRQ "UDC Suspend" + * @udc: udc device + */ +static void irq_udc_suspend(struct pxa_udc *udc) +{ + udc_writel(udc, UDCISR1, UDCISR1_IRSU); + udc->stats.irqs_suspend++; + + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->suspend) + udc->driver->suspend(&udc->gadget); + ep0_idle(udc); +} + +/** + * irq_udc_resume - Handle IRQ "UDC Resume" + * @udc: udc device + */ +static void irq_udc_resume(struct pxa_udc *udc) +{ + udc_writel(udc, UDCISR1, UDCISR1_IRRU); + udc->stats.irqs_resume++; + + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->resume) + udc->driver->resume(&udc->gadget); +} + +/** + * irq_udc_reconfig - Handle IRQ "UDC Change Configuration" + * @udc: udc device + */ +static void irq_udc_reconfig(struct pxa_udc *udc) +{ + unsigned config, interface, alternate, config_change; + u32 udccr = udc_readl(udc, UDCCR); + + udc_writel(udc, UDCISR1, UDCISR1_IRCC); + udc->stats.irqs_reconfig++; + + config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S; + config_change = (config != udc->config); + pxa27x_change_configuration(udc, config); + + interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S; + alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S; + pxa27x_change_interface(udc, interface, alternate); + + if (config_change) + update_pxa_ep_matches(udc); + udc_set_mask_UDCCR(udc, UDCCR_SMAC); +} + +/** + * irq_udc_reset - Handle IRQ "UDC Reset" + * @udc: udc device + */ +static void irq_udc_reset(struct pxa_udc *udc) +{ + u32 udccr = udc_readl(udc, UDCCR); + struct pxa_ep *ep = &udc->pxa_ep[0]; + + dev_info(udc->dev, "USB reset\n"); + udc_writel(udc, UDCISR1, UDCISR1_IRRS); + udc->stats.irqs_reset++; + + if ((udccr & UDCCR_UDA) == 0) { + dev_dbg(udc->dev, "USB reset start\n"); + stop_activity(udc, udc->driver); + } + udc->gadget.speed = USB_SPEED_FULL; + memset(&udc->stats, 0, sizeof udc->stats); + + nuke(ep, -EPROTO); + udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC); + ep0_idle(udc); +} + +/** + * pxa_udc_irq - Main irq handler + * @irq: irq number + * @_dev: udc device + * + * Handles all udc interrupts + */ +static irqreturn_t pxa_udc_irq(int irq, void *_dev) +{ + struct pxa_udc *udc = _dev; + u32 udcisr0 = udc_readl(udc, UDCISR0); + u32 udcisr1 = udc_readl(udc, UDCISR1); + u32 udccr = udc_readl(udc, UDCCR); + u32 udcisr1_spec; + + dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, " + "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr); + + udcisr1_spec = udcisr1 & 0xf8000000; + if (unlikely(udcisr1_spec & UDCISR1_IRSU)) + irq_udc_suspend(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRRU)) + irq_udc_resume(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRCC)) + irq_udc_reconfig(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRRS)) + irq_udc_reset(udc); + + if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK)) + irq_handle_data(irq, udc); + + return IRQ_HANDLED; +} + +static struct pxa_udc memory = { + .gadget = { + .ops = &pxa_udc_ops, + .ep0 = &memory.udc_usb_ep[0].usb_ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + }, + }, + + .udc_usb_ep = { + USB_EP_CTRL, + USB_EP_OUT_BULK(1), + USB_EP_IN_BULK(2), + USB_EP_IN_ISO(3), + USB_EP_OUT_ISO(4), + USB_EP_IN_INT(5), + }, + + .pxa_ep = { + PXA_EP_CTRL, + /* Endpoints for gadget zero */ + PXA_EP_OUT_BULK(1, 1, 3, 0, 0), + PXA_EP_IN_BULK(2, 2, 3, 0, 0), + /* Endpoints for ether gadget, file storage gadget */ + PXA_EP_OUT_BULK(3, 1, 1, 0, 0), + PXA_EP_IN_BULK(4, 2, 1, 0, 0), + PXA_EP_IN_ISO(5, 3, 1, 0, 0), + PXA_EP_OUT_ISO(6, 4, 1, 0, 0), + PXA_EP_IN_INT(7, 5, 1, 0, 0), + /* Endpoints for RNDIS, serial */ + PXA_EP_OUT_BULK(8, 1, 2, 0, 0), + PXA_EP_IN_BULK(9, 2, 2, 0, 0), + PXA_EP_IN_INT(10, 5, 2, 0, 0), + /* + * All the following endpoints are only for completion. They + * won't never work, as multiple interfaces are really broken on + * the pxa. + */ + PXA_EP_OUT_BULK(11, 1, 2, 1, 0), + PXA_EP_IN_BULK(12, 2, 2, 1, 0), + /* Endpoint for CDC Ether */ + PXA_EP_OUT_BULK(13, 1, 1, 1, 1), + PXA_EP_IN_BULK(14, 2, 1, 1, 1), + } +}; + +/** + * pxa_udc_probe - probes the udc device + * @_dev: platform device + * + * Perform basic init : allocates udc clock, creates sysfs files, requests + * irq. + */ +static int __init pxa_udc_probe(struct platform_device *pdev) +{ + struct resource *regs; + struct pxa_udc *udc = &memory; + int retval; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + udc->irq = platform_get_irq(pdev, 0); + if (udc->irq < 0) + return udc->irq; + + udc->dev = &pdev->dev; + udc->mach = pdev->dev.platform_data; + + udc->clk = clk_get(&pdev->dev, "UDCCLK"); + if (IS_ERR(udc->clk)) { + retval = PTR_ERR(udc->clk); + goto err_clk; + } + + retval = -ENOMEM; + udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!udc->regs) { + dev_err(&pdev->dev, "Unable to map UDC I/O memory\n"); + goto err_map; + } + + device_initialize(&udc->gadget.dev); + udc->gadget.dev.parent = &pdev->dev; + udc->gadget.dev.dma_mask = NULL; + + the_controller = udc; + platform_set_drvdata(pdev, udc); + udc_init_data(udc); + pxa_eps_setup(udc); + + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(udc->irq, pxa_udc_irq, + IRQF_SHARED, driver_name, udc); + if (retval != 0) { + dev_err(udc->dev, "%s: can't get irq %i, err %d\n", + driver_name, IRQ_USB, retval); + goto err_irq; + } + + pxa_init_debugfs(udc); + return 0; +err_irq: + iounmap(udc->regs); +err_map: + clk_put(udc->clk); + udc->clk = NULL; +err_clk: + return retval; +} + +/** + * pxa_udc_remove - removes the udc device driver + * @_dev: platform device + */ +static int __exit pxa_udc_remove(struct platform_device *_dev) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + + usb_gadget_unregister_driver(udc->driver); + free_irq(udc->irq, udc); + pxa_cleanup_debugfs(udc); + + platform_set_drvdata(_dev, NULL); + the_controller = NULL; + clk_put(udc->clk); + + return 0; +} + +static void pxa_udc_shutdown(struct platform_device *_dev) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + + if (udc_readl(udc, UDCCR) & UDCCR_UDE) + udc_disable(udc); +} + +#ifdef CONFIG_PM +/** + * pxa_udc_suspend - Suspend udc device + * @_dev: platform device + * @state: suspend state + * + * Suspends udc : saves configuration registers (UDCCR*), then disables the udc + * device. + */ +static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) +{ + int i; + struct pxa_udc *udc = platform_get_drvdata(_dev); + struct pxa_ep *ep; + + ep = &udc->pxa_ep[0]; + udc->udccsr0 = udc_ep_readl(ep, UDCCSR); + for (i = 1; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + ep->udccsr_value = udc_ep_readl(ep, UDCCSR); + ep->udccr_value = udc_ep_readl(ep, UDCCR); + ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n", + ep->udccsr_value, ep->udccr_value); + } + + udc_disable(udc); + + return 0; +} + +/** + * pxa_udc_resume - Resume udc device + * @_dev: platform device + * + * Resumes udc : restores configuration registers (UDCCR*), then enables the udc + * device. + */ +static int pxa_udc_resume(struct platform_device *_dev) +{ + int i; + struct pxa_udc *udc = platform_get_drvdata(_dev); + struct pxa_ep *ep; + + ep = &udc->pxa_ep[0]; + udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME)); + for (i = 1; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + udc_ep_writel(ep, UDCCSR, ep->udccsr_value); + udc_ep_writel(ep, UDCCR, ep->udccr_value); + ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n", + ep->udccsr_value, ep->udccr_value); + } + + udc_enable(udc); + /* + * We do not handle OTG yet. + * + * OTGPH bit is set when sleep mode is entered. + * it indicates that OTG pad is retaining its state. + * Upon exit from sleep mode and before clearing OTGPH, + * Software must configure the USB OTG pad, UDC, and UHC + * to the state they were in before entering sleep mode. + */ + PSSR |= PSSR_OTGPH; + + return 0; +} +#endif + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:pxa2xx-udc"); + +static struct platform_driver udc_driver = { + .driver = { + .name = "pxa2xx-udc", + .owner = THIS_MODULE, + }, + .remove = __exit_p(pxa_udc_remove), + .shutdown = pxa_udc_shutdown, +#ifdef CONFIG_PM + .suspend = pxa_udc_suspend, + .resume = pxa_udc_resume +#endif +}; + +static int __init udc_init(void) +{ + if (!cpu_is_pxa27x()) + return -ENODEV; + + printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); + return platform_driver_probe(&udc_driver, pxa_udc_probe); +} +module_init(udc_init); + + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); |