aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/f_sourcesink.c587
-rw-r--r--drivers/usb/gadget/g_zero.h23
2 files changed, 610 insertions, 0 deletions
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
new file mode 100644
index 00000000000..f18c3a14d72
--- /dev/null
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -0,0 +1,587 @@
+/*
+ * f_sourcesink.c - USB peripheral source/sink configuration driver
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include "g_zero.h"
+#include "gadget_chips.h"
+
+
+/*
+ * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
+ * controller drivers.
+ *
+ * This just sinks bulk packets OUT to the peripheral and sources them IN
+ * to the host, optionally with specific data patterns for integrity tests.
+ * As such it supports basic functionality and load tests.
+ *
+ * In terms of control messaging, this supports all the standard requests
+ * plus two that support control-OUT tests. If the optional "autoresume"
+ * mode is enabled, it provides good functional coverage for the "USBCV"
+ * test harness from USB-IF.
+ *
+ * Note that because this doesn't queue more than one request at a time,
+ * some other function must be used to test queueing logic. The network
+ * link (g_ether) is the best overall option for that, since its TX and RX
+ * queues are relatively independent, will receive a range of packet sizes,
+ * and can often be made to run out completely. Those issues are important
+ * when stress testing peripheral controller drivers.
+ *
+ *
+ * This is currently packaged as a configuration driver, which can't be
+ * combined with other functions to make composite devices. However, it
+ * can be combined with other independent configurations.
+ */
+struct f_sourcesink {
+ struct usb_function function;
+
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
+ struct timer_list resume;
+};
+
+static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
+{
+ return container_of(f, struct f_sourcesink, function);
+}
+
+static unsigned autoresume;
+module_param(autoresume, uint, 0);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
+static unsigned pattern;
+module_param(pattern, uint, 0);
+MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor source_sink_intf = {
+ .bLength = sizeof source_sink_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_source_sink_descs[] = {
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_source_sink_descs[] = {
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+/* function-specific strings: */
+
+static struct usb_string strings_sourcesink[] = {
+ [0].s = "source and sink data",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_sourcesink = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_sourcesink,
+};
+
+static struct usb_gadget_strings *sourcesink_strings[] = {
+ &stringtab_sourcesink,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void sourcesink_autoresume(unsigned long _c)
+{
+ struct usb_composite_dev *cdev = (void *)_c;
+ struct usb_gadget *g = cdev->gadget;
+
+ /* Normally the host would be woken up for something
+ * more significant than just a timer firing; likely
+ * because of some direct user request.
+ */
+ if (g->speed != USB_SPEED_UNKNOWN) {
+ int status = usb_gadget_wakeup(g);
+ DBG(cdev, "%s --> %d\n", __func__, status);
+ }
+}
+
+static int __init
+sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_sourcesink *ss = func_to_ss(f);
+ int id;
+
+ /* allocate interface ID(s) */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ source_sink_intf.bInterfaceNumber = id;
+
+ /* allocate endpoints */
+ ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
+ if (!ss->in_ep) {
+autoconf_fail:
+ ERROR(cdev, "%s: can't autoconfigure on %s\n",
+ f->name, cdev->gadget->name);
+ return -ENODEV;
+ }
+ ss->in_ep->driver_data = cdev; /* claim */
+
+ ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
+ if (!ss->out_ep)
+ goto autoconf_fail;
+ ss->out_ep->driver_data = cdev; /* claim */
+
+ setup_timer(&ss->resume, sourcesink_autoresume,
+ (unsigned long) c->cdev);
+
+ /* support high speed hardware */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
+ f->hs_descriptors = hs_source_sink_descs;
+ }
+
+ DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ f->name, ss->in_ep->name, ss->out_ep->name);
+ return 0;
+}
+
+static void
+sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ kfree(func_to_ss(f));
+}
+
+/* optionally require specific source/sink data patterns */
+static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+ struct usb_composite_dev *cdev = ss->function.config->cdev;
+
+ for (i = 0; i < req->actual; i++, buf++) {
+ switch (pattern) {
+
+ /* all-zeroes has no synchronization issues */
+ case 0:
+ if (*buf == 0)
+ continue;
+ break;
+
+ /* "mod63" stays in sync with short-terminated transfers,
+ * OR otherwise when host and gadget agree on how large
+ * each usb transfer request should be. Resync is done
+ * with set_interface or set_config. (We *WANT* it to
+ * get quickly out of sync if controllers or their drivers
+ * stutter for any reason, including buffer duplcation...)
+ */
+ case 1:
+ if (*buf == (u8)(i % 63))
+ continue;
+ break;
+ }
+ ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+ usb_ep_set_halt(ss->out_ep);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ switch (pattern) {
+ case 0:
+ memset(req->buf, 0, req->length);
+ break;
+ case 1:
+ for (i = 0; i < req->length; i++)
+ *buf++ = (u8) (i % 63);
+ break;
+ }
+}
+
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_sourcesink *ss = ep->driver_data;
+ struct usb_composite_dev *cdev = ss->function.config->cdev;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == ss->out_ep) {
+ check_read_data(ss, req);
+ memset(req->buf, 0x55, req->length);
+ } else
+ reinit_write_data(ep, req);
+ break;
+
+ /* this endpoint is normally active while we're configured */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+ req->actual, req->length);
+ if (ep == ss->out_ep)
+ check_read_data(ss, req);
+ free_ep_req(ep, req);
+ return;
+
+ case -EOVERFLOW: /* buffer overrun on read means that
+ * we didn't provide a big enough
+ * buffer.
+ */
+ default:
+#if 1
+ DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+#endif
+ case -EREMOTEIO: /* short read */
+ break;
+ }
+
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (status) {
+ ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n",
+ ep->name, req->length, status);
+ usb_ep_set_halt(ep);
+ /* FIXME recover later ... somehow */
+ }
+}
+
+static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in)
+{
+ struct usb_ep *ep;
+ struct usb_request *req;
+ int status;
+
+ ep = is_in ? ss->in_ep : ss->out_ep;
+ req = alloc_ep_req(ep);
+ if (!req)
+ return -ENOMEM;
+
+ req->complete = source_sink_complete;
+ if (is_in)
+ reinit_write_data(ep, req);
+ else
+ memset(req->buf, 0x55, req->length);
+
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (status) {
+ struct usb_composite_dev *cdev;
+
+ cdev = ss->function.config->cdev;
+ ERROR(cdev, "start %s %s --> %d\n",
+ is_in ? "IN" : "OUT",
+ ep->name, status);
+ free_ep_req(ep, req);
+ }
+
+ return status;
+}
+
+static void disable_source_sink(struct f_sourcesink *ss)
+{
+ struct usb_composite_dev *cdev;
+
+ cdev = ss->function.config->cdev;
+ disable_endpoints(cdev, ss->in_ep, ss->out_ep);
+ del_timer(&ss->resume);
+ VDBG(cdev, "%s disabled\n", ss->function.name);
+}
+
+static int
+enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
+{
+ int result = 0;
+ const struct usb_endpoint_descriptor *src, *sink;
+ struct usb_ep *ep;
+
+ src = ep_choose(cdev->gadget, &hs_source_desc, &fs_source_desc);
+ sink = ep_choose(cdev->gadget, &hs_sink_desc, &fs_sink_desc);
+
+ /* one endpoint writes (sources) zeroes IN (to the host) */
+ ep = ss->in_ep;
+ result = usb_ep_enable(ep, src);
+ if (result < 0)
+ return result;
+ ep->driver_data = ss;
+
+ result = source_sink_start_ep(ss, true);
+ if (result < 0) {
+fail:
+ ep = ss->in_ep;
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ return result;
+ }
+
+ /* one endpoint reads (sinks) anything OUT (from the host) */
+ ep = ss->out_ep;
+ result = usb_ep_enable(ep, sink);
+ if (result < 0)
+ goto fail;
+ ep->driver_data = ss;
+
+ result = source_sink_start_ep(ss, false);
+ if (result < 0) {
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ goto fail;
+ }
+
+ DBG(cdev, "%s enabled\n", ss->function.name);
+ return result;
+}
+
+static int sourcesink_set_alt(struct usb_function *f,
+ unsigned intf, unsigned alt)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt is zero */
+ if (ss->in_ep->driver_data)
+ disable_source_sink(ss);
+ return enable_source_sink(cdev, ss);
+}
+
+static void sourcesink_disable(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+
+ disable_source_sink(ss);
+}
+
+static void sourcesink_suspend(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+ return;
+
+ if (autoresume) {
+ mod_timer(&ss->resume, jiffies + (HZ * autoresume));
+ DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+ } else
+ DBG(cdev, "%s\n", __func__);
+}
+
+static void sourcesink_resume(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "%s\n", __func__);
+ del_timer(&ss->resume);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init sourcesink_bind_config(struct usb_configuration *c)
+{
+ struct f_sourcesink *ss;
+ int status;
+
+ ss = kzalloc(sizeof *ss, GFP_KERNEL);
+ if (!ss)
+ return -ENOMEM;
+
+ ss->function.name = "source/sink";
+ ss->function.descriptors = fs_source_sink_descs;
+ ss->function.bind = sourcesink_bind;
+ ss->function.unbind = sourcesink_unbind;
+ ss->function.set_alt = sourcesink_set_alt;
+ ss->function.disable = sourcesink_disable;
+ ss->function.suspend = sourcesink_suspend;
+ ss->function.resume = sourcesink_resume;
+
+ status = usb_add_function(c, &ss->function);
+ if (status)
+ kfree(ss);
+ return status;
+}
+
+static int sourcesink_setup(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = c->cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * the two control test requests.
+ */
+ switch (ctrl->bRequest) {
+
+ /*
+ * These are the same vendor-specific requests supported by
+ * Intel's USB 2.0 compliance test devices. We exceed that
+ * device spec by allowing multiple-packet requests.
+ *
+ * NOTE: the Control-OUT data stays in req->buf ... better
+ * would be copying it into a scratch buffer, so that other
+ * requests may safely intervene.
+ */
+ case 0x5b: /* control WRITE test -- fill the buffer */
+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* just read that many bytes into the buffer */
+ if (w_length > req->length)
+ break;
+ value = w_length;
+ break;
+ case 0x5c: /* control READ test -- return the buffer */
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* expect those bytes are still in the buffer; send back */
+ if (w_length > req->length)
+ break;
+ value = w_length;
+ break;
+
+ default:
+unknown:
+ VDBG(c->cdev,
+ "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(c->cdev, "source/sinkc response, err %d\n",
+ value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static struct usb_configuration sourcesink_driver = {
+ .label = "source/sink",
+ .strings = sourcesink_strings,
+ .bind = sourcesink_bind_config,
+ .setup = sourcesink_setup,
+ .bConfigurationValue = 3,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+ /* .iConfiguration = DYNAMIC */
+};
+
+/**
+ * sourcesink_add - add a source/sink testing configuration to a device
+ * @cdev: the device to support the configuration
+ */
+int __init sourcesink_add(struct usb_composite_dev *cdev)
+{
+ int id;
+
+ /* allocate string ID(s) */
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_sourcesink[0].id = id;
+
+ source_sink_intf.iInterface = id;
+ sourcesink_driver.iConfiguration = id;
+
+ /* support autoresume for remote wakeup testing */
+ if (autoresume)
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+
+ /* support OTG systems */
+ if (gadget_is_otg(cdev->gadget)) {
+ sourcesink_driver.descriptors = otg_desc;
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ return usb_add_config(cdev, &sourcesink_driver);
+}
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
new file mode 100644
index 00000000000..2781221b946
--- /dev/null
+++ b/drivers/usb/gadget/g_zero.h
@@ -0,0 +1,23 @@
+/*
+ * This header declares the utility functions used by "Gadget Zero", plus
+ * interfaces to its two single-configuration function drivers.
+ */
+
+#ifndef __G_ZERO_H
+#define __G_ZERO_H
+
+#include <linux/usb/composite.h>
+
+/* global state */
+extern const struct usb_descriptor_header *otg_desc[];
+
+/* common utilities */
+struct usb_request *alloc_ep_req(struct usb_ep *ep);
+void free_ep_req(struct usb_ep *ep, struct usb_request *req);
+void disable_endpoints(struct usb_composite_dev *cdev,
+ struct usb_ep *in, struct usb_ep *out);
+
+/* configuration-specific linkup */
+int sourcesink_add(struct usb_composite_dev *cdev);
+
+#endif /* __G_ZERO_H */