diff options
Diffstat (limited to 'drivers/usb/host/isp116x-hcd.c')
-rw-r--r-- | drivers/usb/host/isp116x-hcd.c | 88 |
1 files changed, 33 insertions, 55 deletions
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 75128c37180..41bbae83fc7 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -83,7 +83,7 @@ #include "../core/hcd.h" #include "isp116x.h" -#define DRIVER_VERSION "08 Apr 2005" +#define DRIVER_VERSION "05 Aug 2005" #define DRIVER_DESC "ISP116x USB Host Controller Driver" MODULE_DESCRIPTION(DRIVER_DESC); @@ -629,14 +629,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) ERR("Unrecoverable error\n"); /* What should we do here? Reset? */ } - if (intstat & HCINT_RHSC) { - isp116x->rhstatus = - isp116x_read_reg32(isp116x, HCRHSTATUS); - isp116x->rhport[0] = - isp116x_read_reg32(isp116x, HCRHPORT1); - isp116x->rhport[1] = - isp116x_read_reg32(isp116x, HCRHPORT2); - } + if (intstat & HCINT_RHSC) + /* When root hub or any of its ports is going + to come out of suspend, it may take more + than 10ms for status bits to stabilize. */ + mod_timer(&hcd->rh_timer, jiffies + + msecs_to_jiffies(20) + 1); if (intstat & HCINT_RD) { DBG("---- remote wakeup\n"); schedule_work(&isp116x->rh_resume); @@ -925,20 +923,27 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf) { struct isp116x *isp116x = hcd_to_isp116x(hcd); int ports, i, changed = 0; + unsigned long flags; if (!HC_IS_RUNNING(hcd->state)) return -ESHUTDOWN; - ports = isp116x->rhdesca & RH_A_NDP; + /* Report no status change now, if we are scheduled to be + called later */ + if (timer_pending(&hcd->rh_timer)) + return 0; - /* init status */ + ports = isp116x->rhdesca & RH_A_NDP; + spin_lock_irqsave(&isp116x->lock, flags); + isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS); if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC)) buf[0] = changed = 1; else buf[0] = 0; for (i = 0; i < ports; i++) { - u32 status = isp116x->rhport[i]; + u32 status = isp116x->rhport[i] = + isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1); if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC | RH_PS_PRSC)) { @@ -947,6 +952,7 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf) continue; } } + spin_unlock_irqrestore(&isp116x->lock, flags); return changed; } @@ -1463,10 +1469,6 @@ static int isp116x_sw_reset(struct isp116x *isp116x) return ret; } -/* - Reset. Tries to perform platform-specific hardware - reset first; falls back to software reset. -*/ static int isp116x_reset(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); @@ -1474,17 +1476,7 @@ static int isp116x_reset(struct usb_hcd *hcd) u16 clkrdy = 0; int ret = 0, timeout = 15 /* ms */ ; - if (isp116x->board && isp116x->board->reset) { - /* Hardware reset */ - isp116x->board->reset(hcd->self.controller, 1); - msleep(10); - if (isp116x->board->clock) - isp116x->board->clock(hcd->self.controller, 1); - msleep(1); - isp116x->board->reset(hcd->self.controller, 0); - } else - ret = isp116x_sw_reset(isp116x); - + ret = isp116x_sw_reset(isp116x); if (ret) return ret; @@ -1501,10 +1493,7 @@ static int isp116x_reset(struct usb_hcd *hcd) ERR("Clock not ready after 20ms\n"); /* After sw_reset the clock won't report to be ready, if H_WAKEUP pin is high. */ - if (!isp116x->board || !isp116x->board->reset) - ERR("The driver does not support hardware wakeup.\n"); - ERR("Please make sure that the H_WAKEUP pin " - "is pulled low!\n"); + ERR("Please make sure that the H_WAKEUP pin is pulled low!\n"); ret = -ENODEV; } return ret; @@ -1527,15 +1516,7 @@ static void isp116x_stop(struct usb_hcd *hcd) isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS); spin_unlock_irqrestore(&isp116x->lock, flags); - /* Put the chip into reset state */ - if (isp116x->board && isp116x->board->reset) - isp116x->board->reset(hcd->self.controller, 0); - else - isp116x_sw_reset(isp116x); - - /* Stop the clock */ - if (isp116x->board && isp116x->board->clock) - isp116x->board->clock(hcd->self.controller, 0); + isp116x_sw_reset(isp116x); } /* @@ -1561,6 +1542,9 @@ static int isp116x_start(struct usb_hcd *hcd) return -ENODEV; } + /* To be removed in future */ + hcd->uses_new_polling = 1; + isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE); isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE); @@ -1569,7 +1553,7 @@ static int isp116x_start(struct usb_hcd *hcd) if (board->sel15Kres) val |= HCHWCFG_15KRSEL; /* Remote wakeup won't work without working clock */ - if (board->clknotstop || board->remote_wakeup_enable) + if (board->remote_wakeup_enable) val |= HCHWCFG_CLKNOTSTOP; if (board->oc_enable) val |= HCHWCFG_ANALOG_OC; @@ -1580,16 +1564,13 @@ static int isp116x_start(struct usb_hcd *hcd) isp116x_write_reg16(isp116x, HCHWCFG, val); /* ----- Root hub conf */ - val = 0; - /* AN10003_1.pdf recommends NPS to be always 1 */ - if (board->no_power_switching) - val |= RH_A_NPS; - if (board->power_switching_mode) - val |= RH_A_PSM; - if (board->potpg) - val |= (board->potpg << 24) & RH_A_POTPGT; - else - val |= (25 << 24) & RH_A_POTPGT; + val = (25 << 24) & RH_A_POTPGT; + /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to + be always set. Yet, instead, we request individual port + power switching. */ + val |= RH_A_PSM; + /* Report overcurrent per port */ + val |= RH_A_OCPM; isp116x_write_reg32(isp116x, HCRHDESCA, val); isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA); @@ -1619,9 +1600,6 @@ static int isp116x_start(struct usb_hcd *hcd) /* Go operational */ val = HCCONTROL_USB_OPER; - /* Remote wakeup connected - NOT SUPPORTED */ - /* if (board->remote_wakeup_connected) - val |= HCCONTROL_RWC; */ if (board->remote_wakeup_enable) val |= HCCONTROL_RWE; isp116x_write_reg32(isp116x, HCCONTROL, val); @@ -1670,7 +1648,7 @@ static int __init_or_module isp116x_remove(struct device *dev) struct platform_device *pdev; struct resource *res; - if(!hcd) + if (!hcd) return 0; isp116x = hcd_to_isp116x(hcd); pdev = container_of(dev, struct platform_device, dev); |